Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into avr32-arch

1 files changed, 765 insertions, 0 deletions

diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
new file mode 100644
index 00000000000..2b222aaa6f0
--- /dev/null
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -0,0 +1,765 @@
+/*
+ * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008       Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This driver is a port from stlc45xx:
+ *	Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio.h>
+
+#include "p54spi.h"
+#include "p54spi_eeprom.h"
+#include "p54.h"
+
+#include "p54common.h"
+
+MODULE_FIRMWARE("3826.arm");
+MODULE_ALIAS("stlc45xx");
+
+/*
+ * gpios should be handled in board files and provided via platform data,
+ * but because it's currently impossible for p54spi to have a header file
+ * in include/linux, let's use module paramaters for now
+ */
+
+static int p54spi_gpio_power = 97;
+module_param(p54spi_gpio_power, int, 0444);
+MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
+
+static int p54spi_gpio_irq = 87;
+module_param(p54spi_gpio_irq, int, 0444);
+MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
+
+static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
+			      void *buf, size_t len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	__le16 addr;
+
+	/* We first push the address */
+	addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &addr;
+	t[0].len = sizeof(addr);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	spi_sync(priv->spi, &m);
+}
+
+
+static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
+			     const void *buf, size_t len)
+{
+	struct spi_transfer t[3];
+	struct spi_message m;
+	__le16 addr;
+
+	/* We first push the address */
+	addr = cpu_to_le16(address << 8);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &addr;
+	t[0].len = sizeof(addr);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	if (len % 2) {
+		__le16 last_word;
+		last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
+
+		t[2].tx_buf = &last_word;
+		t[2].len = sizeof(last_word);
+		spi_message_add_tail(&t[2], &m);
+	}
+
+	spi_sync(priv->spi, &m);
+}
+
+static u16 p54spi_read16(struct p54s_priv *priv, u8 addr)
+{
+	__le16 val;
+
+	p54spi_spi_read(priv, addr, &val, sizeof(val));
+
+	return le16_to_cpu(val);
+}
+
+static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
+{
+	__le32 val;
+
+	p54spi_spi_read(priv, addr, &val, sizeof(val));
+
+	return le32_to_cpu(val);
+}
+
+static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
+{
+	p54spi_spi_write(priv, addr, &val, sizeof(val));
+}
+
+static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
+{
+	p54spi_spi_write(priv, addr, &val, sizeof(val));
+}
+
+struct p54spi_spi_reg {
+	u16 address;		/* __le16 ? */
+	u16 length;
+	char *name;
+};
+
+static const struct p54spi_spi_reg p54spi_registers_array[] =
+{
+	{ SPI_ADRS_ARM_INTERRUPTS,	32, "ARM_INT     " },
+	{ SPI_ADRS_ARM_INT_EN,		32, "ARM_INT_ENA " },
+	{ SPI_ADRS_HOST_INTERRUPTS,	32, "HOST_INT    " },
+	{ SPI_ADRS_HOST_INT_EN,		32, "HOST_INT_ENA" },
+	{ SPI_ADRS_HOST_INT_ACK,	32, "HOST_INT_ACK" },
+	{ SPI_ADRS_GEN_PURP_1,		32, "GP1_COMM    " },
+	{ SPI_ADRS_GEN_PURP_2,		32, "GP2_COMM    " },
+	{ SPI_ADRS_DEV_CTRL_STAT,	32, "DEV_CTRL_STA" },
+	{ SPI_ADRS_DMA_DATA,		16, "DMA_DATA    " },
+	{ SPI_ADRS_DMA_WRITE_CTRL,	16, "DMA_WR_CTRL " },
+	{ SPI_ADRS_DMA_WRITE_LEN,	16, "DMA_WR_LEN  " },
+	{ SPI_ADRS_DMA_WRITE_BASE,	32, "DMA_WR_BASE " },
+	{ SPI_ADRS_DMA_READ_CTRL,	16, "DMA_RD_CTRL " },
+	{ SPI_ADRS_DMA_READ_LEN,	16, "DMA_RD_LEN  " },
+	{ SPI_ADRS_DMA_WRITE_BASE,	32, "DMA_RD_BASE " }
+};
+
+static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
+{
+	int i;
+	__le32 buffer;
+
+	for (i = 0; i < 2000; i++) {
+		p54spi_spi_read(priv, reg, &buffer, sizeof(buffer));
+		if (buffer == bits)
+			return 1;
+
+		msleep(1);
+	}
+	return 0;
+}
+
+static int p54spi_request_firmware(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	int ret;
+
+	/* FIXME: should driver use it's own struct device? */
+	ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
+
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
+		return ret;
+	}
+
+	ret = p54_parse_firmware(dev, priv->firmware);
+	if (ret) {
+		release_firmware(priv->firmware);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int p54spi_request_eeprom(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	const struct firmware *eeprom;
+	int ret;
+
+	/*
+	 * allow users to customize their eeprom.
+	 */
+
+	ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
+	if (ret < 0) {
+		dev_info(&priv->spi->dev, "loading default eeprom...\n");
+		ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
+				       sizeof(p54spi_eeprom));
+	} else {
+		dev_info(&priv->spi->dev, "loading user eeprom...\n");
+		ret = p54_parse_eeprom(dev, (void *) eeprom->data,
+				       (int)eeprom->size);
+		release_firmware(eeprom);
+	}
+	return ret;
+}
+
+static int p54spi_upload_firmware(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	unsigned long fw_len, fw_addr;
+	long _fw_len;
+
+	/* stop the device */
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
+		       SPI_CTRL_STAT_START_HALTED));
+
+	msleep(TARGET_BOOT_SLEEP);
+
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE |
+		       SPI_CTRL_STAT_START_HALTED));
+
+	msleep(TARGET_BOOT_SLEEP);
+
+	fw_addr = ISL38XX_DEV_FIRMWARE_ADDR;
+	fw_len = priv->firmware->size;
+
+	while (fw_len > 0) {
+		_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
+
+		p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
+			       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
+
+		if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
+				    cpu_to_le32(HOST_ALLOWED)) == 0) {
+			dev_err(&priv->spi->dev, "fw_upload not allowed "
+				"to DMA write.");
+			return -EAGAIN;
+		}
+
+		p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN,
+			       cpu_to_le16(_fw_len));
+		p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE,
+			       cpu_to_le32(fw_addr));
+
+		p54spi_spi_write(priv, SPI_ADRS_DMA_DATA,
+				 &priv->firmware->data, _fw_len);
+
+		fw_len -= _fw_len;
+		fw_addr += _fw_len;
+
+		/* FIXME: I think this doesn't work if firmware is large,
+		 * this loop goes to second round. fw->data is not
+		 * increased at all! */
+	}
+
+	BUG_ON(fw_len != 0);
+
+	/* enable host interrupts */
+	p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
+		       cpu_to_le32(SPI_HOST_INTS_DEFAULT));
+
+	/* boot the device */
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
+		       SPI_CTRL_STAT_RAM_BOOT));
+
+	msleep(TARGET_BOOT_SLEEP);
+
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
+	msleep(TARGET_BOOT_SLEEP);
+	return 0;
+}
+
+static void p54spi_power_off(struct p54s_priv *priv)
+{
+	disable_irq(gpio_to_irq(p54spi_gpio_irq));
+	gpio_set_value(p54spi_gpio_power, 0);
+}
+
+static void p54spi_power_on(struct p54s_priv *priv)
+{
+	gpio_set_value(p54spi_gpio_power, 1);
+	enable_irq(gpio_to_irq(p54spi_gpio_irq));
+
+	/*
+	 * need to wait a while before device can be accessed, the lenght
+	 * is just a guess
+	 */
+	msleep(10);
+}
+
+static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
+{
+	p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
+}
+
+static void p54spi_wakeup(struct p54s_priv *priv)
+{
+	unsigned long timeout;
+	u32 ints;
+
+	/* wake the chip */
+	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
+		       cpu_to_le32(SPI_TARGET_INT_WAKEUP));
+
+	/* And wait for the READY interrupt */
+	timeout = jiffies + HZ;
+
+	ints =  p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	while (!(ints & SPI_HOST_INT_READY)) {
+		if (time_after(jiffies, timeout))
+				goto out;
+		ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	}
+
+	p54spi_int_ack(priv, SPI_HOST_INT_READY);
+
+out:
+	return;
+}
+
+static inline void p54spi_sleep(struct p54s_priv *priv)
+{
+	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
+		       cpu_to_le32(SPI_TARGET_INT_SLEEP));
+}
+
+static void p54spi_int_ready(struct p54s_priv *priv)
+{
+	p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
+		       SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
+
+	switch (priv->fw_state) {
+	case FW_STATE_BOOTING:
+		priv->fw_state = FW_STATE_READY;
+		complete(&priv->fw_comp);
+		break;
+	case FW_STATE_RESETTING:
+		priv->fw_state = FW_STATE_READY;
+		/* TODO: reinitialize state */
+		break;
+	default:
+		break;
+	}
+}
+
+static int p54spi_rx(struct p54s_priv *priv)
+{
+	struct sk_buff *skb;
+	u16 len;
+
+	p54spi_wakeup(priv);
+
+	/* dummy read to flush SPI DMA controller bug */
+	p54spi_read16(priv, SPI_ADRS_GEN_PURP_1);
+
+	len = p54spi_read16(priv, SPI_ADRS_DMA_DATA);
+
+	if (len == 0) {
+		dev_err(&priv->spi->dev, "rx request of zero bytes");
+		return 0;
+	}
+
+	skb = dev_alloc_skb(len);
+	if (!skb) {
+		dev_err(&priv->spi->dev, "could not alloc skb");
+		return 0;
+	}
+
+	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, skb_put(skb, len), len);
+	p54spi_sleep(priv);
+
+	if (p54_rx(priv->hw, skb) == 0)
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+
+static irqreturn_t p54spi_interrupt(int irq, void *config)
+{
+	struct spi_device *spi = config;
+	struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+
+	queue_work(priv->hw->workqueue, &priv->work);
+
+	return IRQ_HANDLED;
+}
+
+static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
+{
+	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+	struct p54s_dma_regs dma_regs;
+	unsigned long timeout;
+	int ret = 0;
+	u32 ints;
+
+	p54spi_wakeup(priv);
+
+	dma_regs.cmd = cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE);
+	dma_regs.len = cpu_to_le16(skb->len);
+	dma_regs.addr = hdr->req_id;
+
+	p54spi_spi_write(priv, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs,
+			   sizeof(dma_regs));
+
+	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, skb->data, skb->len);
+
+	timeout = jiffies + 2 * HZ;
+	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	while (!(ints & SPI_HOST_INT_WR_READY)) {
+		if (time_after(jiffies, timeout)) {
+			dev_err(&priv->spi->dev, "WR_READY timeout");
+			ret = -1;
+			goto out;
+		}
+		ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	}
+
+	p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
+	p54spi_sleep(priv);
+
+out:
+	if (FREE_AFTER_TX(skb))
+		p54_free_skb(priv->hw, skb);
+	return ret;
+}
+
+static int p54spi_wq_tx(struct p54s_priv *priv)
+{
+	struct p54s_tx_info *entry;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *info;
+	struct p54_tx_info *minfo;
+	struct p54s_tx_info *dinfo;
+	int ret = 0;
+
+	spin_lock_bh(&priv->tx_lock);
+
+	while (!list_empty(&priv->tx_pending)) {
+		entry = list_entry(priv->tx_pending.next,
+				   struct p54s_tx_info, tx_list);
+
+		list_del_init(&entry->tx_list);
+
+		spin_unlock_bh(&priv->tx_lock);
+
+		dinfo = container_of((void *) entry, struct p54s_tx_info,
+				     tx_list);
+		minfo = container_of((void *) dinfo, struct p54_tx_info,
+				     data);
+		info = container_of((void *) minfo, struct ieee80211_tx_info,
+				    rate_driver_data);
+		skb = container_of((void *) info, struct sk_buff, cb);
+
+		ret = p54spi_tx_frame(priv, skb);
+
+		spin_lock_bh(&priv->tx_lock);
+
+		if (ret < 0) {
+			p54_free_skb(priv->hw, skb);
+			goto out;
+		}
+	}
+
+out:
+	spin_unlock_bh(&priv->tx_lock);
+	return ret;
+}
+
+static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+	struct p54s_priv *priv = dev->priv;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
+	struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
+
+	BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
+
+	spin_lock_bh(&priv->tx_lock);
+	list_add_tail(&di->tx_list, &priv->tx_pending);
+	spin_unlock_bh(&priv->tx_lock);
+
+	queue_work(priv->hw->workqueue, &priv->work);
+}
+
+static void p54spi_work(struct work_struct *work)
+{
+	struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
+	u32 ints;
+	int ret;
+
+	mutex_lock(&priv->mutex);
+
+	if (priv->fw_state == FW_STATE_OFF &&
+	    priv->fw_state == FW_STATE_RESET)
+		goto out;
+
+	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+
+	if (ints & SPI_HOST_INT_READY) {
+		p54spi_int_ready(priv);
+		p54spi_int_ack(priv, SPI_HOST_INT_READY);
+	}
+
+	if (priv->fw_state != FW_STATE_READY)
+		goto out;
+
+	if (ints & SPI_HOST_INT_UPDATE) {
+		p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
+		ret = p54spi_rx(priv);
+		if (ret < 0)
+			goto out;
+	}
+	if (ints & SPI_HOST_INT_SW_UPDATE) {
+		p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
+		ret = p54spi_rx(priv);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = p54spi_wq_tx(priv);
+	if (ret < 0)
+		goto out;
+
+	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+static int p54spi_op_start(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	unsigned long timeout;
+	int ret = 0;
+
+	if (mutex_lock_interruptible(&priv->mutex)) {
+		ret = -EINTR;
+		goto out;
+	}
+
+	priv->fw_state = FW_STATE_BOOTING;
+
+	p54spi_power_on(priv);
+
+	ret = p54spi_upload_firmware(dev);
+	if (ret < 0) {
+		p54spi_power_off(priv);
+		goto out_unlock;
+	}
+
+	mutex_unlock(&priv->mutex);
+
+	timeout = msecs_to_jiffies(2000);
+	timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
+							    timeout);
+	if (!timeout) {
+		dev_err(&priv->spi->dev, "firmware boot failed");
+		p54spi_power_off(priv);
+		ret = -1;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&priv->mutex)) {
+		ret = -EINTR;
+		p54spi_power_off(priv);
+		goto out;
+	}
+
+	WARN_ON(priv->fw_state != FW_STATE_READY);
+
+out_unlock:
+	mutex_unlock(&priv->mutex);
+
+out:
+	return ret;
+}
+
+static void p54spi_op_stop(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+
+	if (mutex_lock_interruptible(&priv->mutex)) {
+		/* FIXME: how to handle this error? */
+		return;
+	}
+
+	WARN_ON(priv->fw_state != FW_STATE_READY);
+
+	cancel_work_sync(&priv->work);
+
+	p54spi_power_off(priv);
+	spin_lock_bh(&priv->tx_lock);
+	INIT_LIST_HEAD(&priv->tx_pending);
+	spin_unlock_bh(&priv->tx_lock);
+
+	priv->fw_state = FW_STATE_OFF;
+	mutex_unlock(&priv->mutex);
+}
+
+static int __devinit p54spi_probe(struct spi_device *spi)
+{
+	struct p54s_priv *priv = NULL;
+	struct ieee80211_hw *hw;
+	int ret = -EINVAL;
+
+	hw = p54_init_common(sizeof(*priv));
+	if (!hw) {
+		dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+		return -ENOMEM;
+	}
+
+	priv = hw->priv;
+	priv->hw = hw;
+	dev_set_drvdata(&spi->dev, priv);
+	priv->spi = spi;
+
+	spi->bits_per_word = 16;
+	spi->max_speed_hz = 24000000;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "spi_setup failed");
+		goto err_free_common;
+	}
+
+	ret = gpio_request(p54spi_gpio_power, "p54spi power");
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
+		goto err_free_common;
+	}
+
+	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
+		goto err_free_common;
+	}
+
+	gpio_direction_output(p54spi_gpio_power, 0);
+	gpio_direction_input(p54spi_gpio_irq);
+
+	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
+			  p54spi_interrupt, IRQF_DISABLED, "p54spi",
+			  priv->spi);
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "request_irq() failed");
+		goto err_free_common;
+	}
+
+	set_irq_type(gpio_to_irq(p54spi_gpio_irq),
+		     IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(gpio_to_irq(p54spi_gpio_irq));
+
+	INIT_WORK(&priv->work, p54spi_work);
+	init_completion(&priv->fw_comp);
+	INIT_LIST_HEAD(&priv->tx_pending);
+	mutex_init(&priv->mutex);
+	SET_IEEE80211_DEV(hw, &spi->dev);
+	priv->common.open = p54spi_op_start;
+	priv->common.stop = p54spi_op_stop;
+	priv->common.tx = p54spi_op_tx;
+
+	ret = p54spi_request_firmware(hw);
+	if (ret < 0)
+		goto err_free_common;
+
+	ret = p54spi_request_eeprom(hw);
+	if (ret)
+		goto err_free_common;
+
+	ret = p54_register_common(hw, &priv->spi->dev);
+	if (ret)
+		goto err_free_common;
+
+	return 0;
+
+err_free_common:
+	p54_free_common(priv->hw);
+	return ret;
+}
+
+static int __devexit p54spi_remove(struct spi_device *spi)
+{
+	struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+
+	ieee80211_unregister_hw(priv->hw);
+
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+
+	gpio_free(p54spi_gpio_power);
+	gpio_free(p54spi_gpio_irq);
+	release_firmware(priv->firmware);
+
+	mutex_destroy(&priv->mutex);
+
+	p54_free_common(priv->hw);
+	ieee80211_free_hw(priv->hw);
+
+	return 0;
+}
+
+
+static struct spi_driver p54spi_driver = {
+	.driver = {
+		/* use cx3110x name because board-n800.c uses that for the
+		 * SPI port */
+		.name		= "cx3110x",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= p54spi_probe,
+	.remove		= __devexit_p(p54spi_remove),
+};
+
+static int __init p54spi_init(void)
+{
+	int ret;
+
+	ret = spi_register_driver(&p54spi_driver);
+	if (ret < 0) {
+		printk(KERN_ERR "failed to register SPI driver: %d", ret);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit p54spi_exit(void)
+{
+	spi_unregister_driver(&p54spi_driver);
+}
+
+module_init(p54spi_init);
+module_exit(p54spi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");