wl1251: use wl1251 prefix everywhere

Last we can change all code prefixes from wl12xx/WL12XX to
wl1251/WL1251.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 53 insertions, 53 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index c52a2085671..d8a155dc2fa 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -1,5 +1,5 @@
 /*
- * This file is part of wl12xx
+ * This file is part of wl1251
  *
  * Copyright (C) 2008 Nokia Corporation
  *
@@ -28,37 +28,37 @@
 #include "wl1251_spi.h"
 #include "wl1251_event.h"
 
-static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
+static void wl1251_boot_enable_interrupts(struct wl1251 *wl)
 {
 	enable_irq(wl->irq);
 }
 
-void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
+void wl1251_boot_target_enable_interrupts(struct wl1251 *wl)
 {
-	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
-	wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+	wl1251_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
 }
 
-int wl12xx_boot_soft_reset(struct wl12xx *wl)
+int wl1251_boot_soft_reset(struct wl1251 *wl)
 {
 	unsigned long timeout;
 	u32 boot_data;
 
 	/* perform soft reset */
-	wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+	wl1251_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
 
 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
 	while (1) {
-		boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
-		wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+		boot_data = wl1251_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		wl1251_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
 		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
 			break;
 
 		if (time_after(jiffies, timeout)) {
 			/* 1.2 check pWhalBus->uSelfClearTime if the
 			 * timeout was reached */
-			wl12xx_error("soft reset timeout");
+			wl1251_error("soft reset timeout");
 			return -1;
 		}
 
@@ -66,15 +66,15 @@ int wl12xx_boot_soft_reset(struct wl12xx *wl)
 	}
 
 	/* disable Rx/Tx */
-	wl12xx_reg_write32(wl, ENABLE, 0x0);
+	wl1251_reg_write32(wl, ENABLE, 0x0);
 
 	/* disable auto calibration on start*/
-	wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
+	wl1251_reg_write32(wl, SPARE_A2, 0xffff);
 
 	return 0;
 }
 
-int wl12xx_boot_init_seq(struct wl12xx *wl)
+int wl1251_boot_init_seq(struct wl1251 *wl)
 {
 	u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
 
@@ -96,23 +96,23 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 	};
 
 	/* read NVS params */
-	scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
-	wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+	scr_pad6 = wl1251_reg_read32(wl, SCR_PAD6);
+	wl1251_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
 
 	/* read ELP_CMD */
-	elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
-	wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+	elp_cmd = wl1251_reg_read32(wl, ELP_CMD);
+	wl1251_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
 
 	/* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
 	ref_freq = scr_pad6 & 0x000000FF;
-	wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+	wl1251_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
 
-	wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
+	wl1251_reg_write32(wl, PLL_CAL_TIME, 0x9);
 
 	/*
 	 * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
 	 */
-	wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
+	wl1251_reg_write32(wl, CLK_BUF_TIME, 0x6);
 
 	/*
 	 * set the clock detect feature to work in the restart wu procedure
@@ -120,18 +120,18 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 	 * (ELP_CFG_MODE[13:12])
 	 */
 	tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
-	wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
+	wl1251_reg_write32(wl, ELP_CFG_MODE, tmp);
 
 	/* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
 	elp_cmd |= 0x00000040;
-	wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
+	wl1251_reg_write32(wl, ELP_CMD, elp_cmd);
 
 	/* PG 1.2: Set the BB PLL stable time to be 1000usec
 	 * (PLL_STABLE_TIME) */
-	wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+	wl1251_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
 
 	/* PG 1.2: read clock request time */
-	init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
+	init_data = wl1251_reg_read32(wl, CLK_REQ_TIME);
 
 	/*
 	 * PG 1.2: set the clock request time to be ref_clk_settling_time -
@@ -141,35 +141,35 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 		tmp = init_data - 0x21;
 	else
 		tmp = 0;
-	wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
+	wl1251_reg_write32(wl, CLK_REQ_TIME, tmp);
 
 	/* set BB PLL configurations in RF AFE */
-	wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
+	wl1251_reg_write32(wl, 0x003058cc, 0x4B5);
 
 	/* set RF_AFE_REG_5 */
-	wl12xx_reg_write32(wl, 0x003058d4, 0x50);
+	wl1251_reg_write32(wl, 0x003058d4, 0x50);
 
 	/* set RF_AFE_CTRL_REG_2 */
-	wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
+	wl1251_reg_write32(wl, 0x00305948, 0x11c001);
 
 	/*
 	 * change RF PLL and BB PLL divider for VCO clock and adjust VCO
 	 * bais current(RF_AFE_REG_13)
 	 */
-	wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
+	wl1251_reg_write32(wl, 0x003058f4, 0x1e);
 
 	/* set BB PLL configurations */
 	tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
-	wl12xx_reg_write32(wl, 0x00305840, tmp);
+	wl1251_reg_write32(wl, 0x00305840, tmp);
 
 	/* set fractional divider according to Appendix C-BB PLL
 	 * Calculations
 	 */
 	tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
-	wl12xx_reg_write32(wl, 0x00305844, tmp);
+	wl1251_reg_write32(wl, 0x00305844, tmp);
 
 	/* set the initial data for the sigma delta */
-	wl12xx_reg_write32(wl, 0x00305848, 0x3039);
+	wl1251_reg_write32(wl, 0x00305848, 0x3039);
 
 	/*
 	 * set the accumulator attenuation value, calibration loop1
@@ -178,14 +178,14 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 	 */
 	tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
 		(LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
-	wl12xx_reg_write32(wl, 0x00305854, tmp);
+	wl1251_reg_write32(wl, 0x00305854, tmp);
 
 	/*
 	 * set the calibration stop time after holdoff time expires and set
 	 * settling time HOLD_OFF_TIME_BB
 	 */
 	tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
-	wl12xx_reg_write32(wl, 0x00305858, tmp);
+	wl1251_reg_write32(wl, 0x00305858, tmp);
 
 	/*
 	 * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
@@ -193,7 +193,7 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 	 * BB_ILOOPF[7:3]
 	 */
 	tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
-	wl12xx_reg_write32(wl, 0x003058f8, tmp);
+	wl1251_reg_write32(wl, 0x003058f8, tmp);
 
 	/*
 	 * set regulator output voltage for n divider to
@@ -201,10 +201,10 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 	 * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
 	 * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
 	 */
-	wl12xx_reg_write32(wl, 0x003058f0, 0x29);
+	wl1251_reg_write32(wl, 0x003058f0, 0x29);
 
 	/* enable restart wakeup sequence (ELP_CMD[0]) */
-	wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+	wl1251_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
 
 	/* restart sequence completed */
 	udelay(2000);
@@ -212,19 +212,19 @@ int wl12xx_boot_init_seq(struct wl12xx *wl)
 	return 0;
 }
 
-int wl12xx_boot_run_firmware(struct wl12xx *wl)
+int wl1251_boot_run_firmware(struct wl1251 *wl)
 {
 	int loop, ret;
 	u32 chip_id, interrupt;
 
 	wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
-	chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
+	chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
 
-	wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+	wl1251_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
 	if (chip_id != wl->chip.id) {
-		wl12xx_error("chip id doesn't match after firmware boot");
+		wl1251_error("chip id doesn't match after firmware boot");
 		return -EIO;
 	}
 
@@ -232,41 +232,41 @@ int wl12xx_boot_run_firmware(struct wl12xx *wl)
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		interrupt = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 
 		if (interrupt == 0xffffffff) {
-			wl12xx_error("error reading hardware complete "
+			wl1251_error("error reading hardware complete "
 				     "init indication");
 			return -EIO;
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (interrupt & wl->chip.intr_init_complete) {
-			wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
 					   wl->chip.intr_init_complete);
 			break;
 		}
 	}
 
 	if (loop >= INIT_LOOP) {
-		wl12xx_error("timeout waiting for the hardware to "
+		wl1251_error("timeout waiting for the hardware to "
 			     "complete initialization");
 		return -EIO;
 	}
 
 	/* get hardware config command mail box */
-	wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+	wl->cmd_box_addr = wl1251_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
 
 	/* get hardware config event mail box */
-	wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->event_box_addr = wl1251_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
 
 	/* set the working partition to its "running" mode offset */
-	wl12xx_set_partition(wl,
+	wl1251_set_partition(wl,
 			     wl->chip.p_table[PART_WORK].mem.start,
 			     wl->chip.p_table[PART_WORK].mem.size,
 			     wl->chip.p_table[PART_WORK].reg.start,
 			     wl->chip.p_table[PART_WORK].reg.size);
 
-	wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+	wl1251_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
 		     wl->cmd_box_addr, wl->event_box_addr);
 
 	wl->chip.op_fw_version(wl);
@@ -277,20 +277,20 @@ int wl12xx_boot_run_firmware(struct wl12xx *wl)
 	 */
 
 	/* enable gpio interrupts */
-	wl12xx_boot_enable_interrupts(wl);
+	wl1251_boot_enable_interrupts(wl);
 
 	wl->chip.op_target_enable_interrupts(wl);
 
 	/* unmask all mbox events  */
 	wl->event_mask = 0xffffffff;
 
-	ret = wl12xx_event_unmask(wl);
+	ret = wl1251_event_unmask(wl);
 	if (ret < 0) {
-		wl12xx_error("EVENT mask setting failed");
+		wl1251_error("EVENT mask setting failed");
 		return ret;
 	}
 
-	wl12xx_event_mbox_config(wl);
+	wl1251_event_mbox_config(wl);
 
 	/* firmware startup completed */
 	return 0;