Merge branch 'merge'

16 files changed, 107 insertions, 175 deletions

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e26660..54161aef3ca 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.4.39"
-#define DRV_MODULE_RELDATE	"March 22, 2006"
+#define DRV_MODULE_VERSION	"1.4.40"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2945,7 +2945,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		int buf_size)
 {
 	u32 written, offset32, len32;
-	u8 *buf, start[4], end[4];
+	u8 *buf, start[4], end[4], *flash_buffer = NULL;
 	int rc = 0;
 	int align_start, align_end;
 
@@ -2985,12 +2985,19 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		memcpy(buf + align_start, data_buf, buf_size);
 	}
 
+	if (bp->flash_info->buffered == 0) {
+		flash_buffer = kmalloc(264, GFP_KERNEL);
+		if (flash_buffer == NULL) {
+			rc = -ENOMEM;
+			goto nvram_write_end;
+		}
+	}
+
 	written = 0;
 	while ((written < len32) && (rc == 0)) {
 		u32 page_start, page_end, data_start, data_end;
 		u32 addr, cmd_flags;
 		int i;
-		u8 flash_buffer[264];
 
 	        /* Find the page_start addr */
 		page_start = offset32 + written;
@@ -3061,7 +3068,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		}
 
 		/* Loop to write the new data from data_start to data_end */
-		for (addr = data_start; addr < data_end; addr += 4, i++) {
+		for (addr = data_start; addr < data_end; addr += 4, i += 4) {
 			if ((addr == page_end - 4) ||
 				((bp->flash_info->buffered) &&
 				 (addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 	}
 
 nvram_write_end:
+	if (bp->flash_info->buffered == 0)
+		kfree(flash_buffer);
+
 	if (align_start || align_end)
 		kfree(buf);
 	return rc;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index c99e87838f9..ed15fcaedaf 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -220,6 +220,7 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter);
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 static int e1000_resume(struct pci_dev *pdev);
 #endif
+static void e1000_shutdown(struct pci_dev *pdev);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /* for netdump / net console */
@@ -235,8 +236,9 @@ static struct pci_driver e1000_driver = {
 	/* Power Managment Hooks */
 #ifdef CONFIG_PM
 	.suspend  = e1000_suspend,
-	.resume   = e1000_resume
+	.resume   = e1000_resume,
 #endif
+	.shutdown = e1000_shutdown
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -4611,6 +4613,12 @@ e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 #endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+	e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index f7235c9bc42..705e1229d89 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2891,78 +2891,6 @@ static int nv_open(struct net_device *dev)
 		goto out_drain;
 	}
 
-	if (np->msi_flags & NV_MSI_X_CAPABLE) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			np->msi_x_entry[i].entry = i;
-		}
-		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
-			np->msi_flags |= NV_MSI_X_ENABLED;
-			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
-				/* Request irq for rx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for tx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for link and timer handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to their respective vector */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
-			} else {
-				/* Request irq for all interrupts */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to vector 0 */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-			}
-		}
-	}
-	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
-		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
-			np->msi_flags |= NV_MSI_ENABLED;
-			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-				pci_disable_msi(np->pci_dev);
-				np->msi_flags &= ~NV_MSI_ENABLED;
-				goto out_drain;
-			}
-
-			/* map interrupts to vector 0 */
-			writel(0, base + NvRegMSIMap0);
-			writel(0, base + NvRegMSIMap1);
-			/* enable msi vector 0 */
-			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
-		}
-	}
-	if (ret != 0) {
-		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
-			goto out_drain;
-	}
-
 	/* ask for interrupts */
 	nv_enable_hw_interrupts(dev, np->irqmask);
 
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 5e6d0075299..cff8598aa80 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
 	tristate "TOIM3232 IrDa dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Vishay/Temic
 	  TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a0948852..2ea66aca648 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@ static void do_set_multicast_list(struct net_device *dev)
 		memset(ei_local->mcfilter, 0xFF, 8);
 	}
 
-	/* 
-	 * DP8390 manuals don't specify any magic sequence for altering
-	 * the multicast regs on an already running card. To be safe, we
-	 * ensure multicast mode is off prior to loading up the new hash
-	 * table. If this proves to be not enough, we can always resort
-	 * to stopping the NIC, loading the table and then restarting.
-	 */
-	 
-	if (netif_running(dev))
-		outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
 	outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
 	for(i = 0; i < 8; i++) 
 	{
@@ -1715,6 +1704,8 @@ static void do_set_multicast_list(struct net_device *dev)
   		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
   	else
   		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
 }
 
 /*
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 07c31f19c6b..fc08c4af506 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1774,8 +1774,6 @@ static int pcnet32_open(struct net_device *dev)
 		lp->rx_dma_addr[i] = 0;
 	}
 
-	pcnet32_free_ring(dev);
-
 	/*
 	 * Switch back to 16bit mode to avoid problems with dumb
 	 * DOS packet driver after a warm reboot
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0cc10..5ca5a1b546a 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@ static const struct pci_device_id skge_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },	/* DGE-530T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@ static int skge_set_ring_param(struct net_device *dev,
 	int err;
 
 	if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
-	    p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+	    p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
 		return -EINVAL;
 
 	skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@ static int skge_poll(struct net_device *dev, int *budget)
 		if (control & BMU_OWN)
 			break;
 
-		skb = skge_rx_get(skge, e, control, rd->status,
-				  le16_to_cpu(rd->csum2));
+		skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
 		if (likely(skb)) {
 			dev->last_rx = jiffies;
 			netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 62be6d99d05..959109609d8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.3"
+#define DRV_VERSION		"1.4"
 #define PFX			DRV_NAME " "
 
 /*
@@ -105,6 +105,7 @@ MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -235,6 +236,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -306,7 +308,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 	u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
 	if (sky2->autoneg == AUTONEG_ENABLE &&
-	    (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+	    !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 		u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
 		ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -977,6 +979,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned rxq = rxqaddr[sky2->port];
 	int i;
+	unsigned thresh;
 
 	sky2->rx_put = sky2->rx_next = 0;
 	sky2_qset(hw, rxq);
@@ -1001,9 +1004,21 @@ static int sky2_rx_start(struct sky2_port *sky2)
 		sky2_rx_add(sky2, re->mapaddr);
 	}
 
- 	/* Truncate oversize frames */
- 	sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
- 	sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+	/*
+	 * The receiver hangs if it receives frames larger than the
+	 * packet buffer. As a workaround, truncate oversize frames, but
+	 * the register is limited to 9 bits, so if you do frames > 2052
+	 * you better get the MTU right!
+	 */
+	thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
+	if (thresh > 0x1ff)
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+	else {
+		sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+	}
+
 
 	/* Tell chip about available buffers */
 	sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
@@ -1020,19 +1035,26 @@ static int sky2_up(struct net_device *dev)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
 	u32 ramsize, rxspace, imask;
-	int err;
+	int cap, err = -ENOMEM;
 	struct net_device *otherdev = hw->dev[sky2->port^1];
 
-	/* Block bringing up both ports at the same time on a dual port card.
-	 * There is an unfixed bug where receiver gets confused and picks up
-	 * packets out of order. Until this is fixed, prevent data corruption.
+	/*
+ 	 * On dual port PCI-X card, there is an problem where status
+	 * can be received out of order due to split transactions
 	 */
-	if (otherdev && netif_running(otherdev)) {
-		printk(KERN_INFO PFX "dual port support is disabled.\n");
-		return -EBUSY;
-	}
+	if (otherdev && netif_running(otherdev) &&
+ 	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ 		struct sky2_port *osky2 = netdev_priv(otherdev);
+ 		u16 cmd;
+
+ 		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ 		cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ 		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+ 		sky2->rx_csum = 0;
+ 		osky2->rx_csum = 0;
+ 	}
 
-	err = -ENOMEM;
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 
@@ -1910,6 +1932,12 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 	}
 }
 
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+	return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
@@ -2182,19 +2210,19 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	if (status & Y2_IS_CHK_TXA2)
 		sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
-	if (status & Y2_IS_STAT_BMU)
-		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
 	work_done = sky2_status_intr(hw, work_limit);
 	*budget -= work_done;
 	dev0->quota -= work_done;
 
-	if (work_done >= work_limit)
+	if (status & Y2_IS_STAT_BMU)
+		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
+	if (sky2_more_work(hw))
 		return 1;
 
 	netif_rx_complete(dev0);
 
-	status = sky2_read32(hw, B0_Y2_SP_LISR);
+	sky2_read32(hw, B0_Y2_SP_LISR);
 	return 0;
 }
 
@@ -3078,12 +3106,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	sky2->duplex = -1;
 	sky2->speed = -1;
 	sky2->advertising = sky2_supported_modes(hw);
-
-	/* Receive checksum disabled for Yukon XL
-	 * because of observed problems with incorrect
-	 * values when multiple packets are received in one interrupt
-	 */
-	sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+	sky2->rx_csum = 1;
 
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8012994c9b9..8a0bc5525f0 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@ enum csr_regs {
 enum {
 	Y2_VMAIN_AVAIL	= 1<<17,/* VMAIN available (YUKON-2 only) */
 	Y2_VAUX_AVAIL	= 1<<16,/* VAUX available (YUKON-2 only) */
+	Y2_HW_WOL_ON	= 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
+	Y2_HW_WOL_OFF	= 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */
 	Y2_ASF_ENABLE	= 1<<13,/* ASF Unit Enable (YUKON-2 only) */
 	Y2_ASF_DISABLE	= 1<<12,/* ASF Unit Disable (YUKON-2 only) */
 	Y2_CLK_RUN_ENA	= 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e1b33a25a25..49ad60b7265 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.57"
-#define DRV_MODULE_RELDATE	"Apr 28, 2006"
+#define DRV_MODULE_VERSION	"3.58"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -6488,6 +6488,10 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
 	TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
 	TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
 	TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+	TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+	TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+	TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
 }
 
 static void tg3_timer(unsigned long __opaque)
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05dedf29d..136a70c4d5e 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@ static void init_rxtx_rings(struct net_device *dev)
 			break;
 		skb->dev = dev;			/* Mark as being used by this device. */
 		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
-					skb->len,PCI_DMA_FROMDEVICE);
+					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
 
 		np->rx_ring[i].buffer1 = np->rx_addr[i];
 		np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@ static int netdev_rx(struct net_device *dev)
 			skb->dev = dev;			/* Mark as being used by this device. */
 			np->rx_addr[entry] = pci_map_single(np->pci_dev,
 							skb->data,
-							skb->len, PCI_DMA_FROMDEVICE);
+							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			np->rx_ring[entry].buffer1 = np->rx_addr[entry];
 		}
 		wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a6dc53b4250..fdc21037f6d 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -491,8 +491,6 @@ struct rhine_private {
 	u8 tx_thresh, rx_thresh;
 
 	struct mii_if_info mii_if;
-	struct work_struct tx_timeout_task;
-	struct work_struct check_media_task;
 	void __iomem *base;
 };
 
@@ -500,8 +498,6 @@ static int  mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
 static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
 static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
 static void rhine_tx(struct net_device *dev);
@@ -856,12 +852,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	if (rp->quirks & rqRhineI)
 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
-	INIT_WORK(&rp->tx_timeout_task,
-		  (void (*)(void *))rhine_tx_timeout_task, dev);
-
-	INIT_WORK(&rp->check_media_task,
-		  (void (*)(void *))rhine_check_media_task, dev);
-
 	/* dev->name not defined before register_netdev()! */
 	rc = register_netdev(dev);
 	if (rc)
@@ -1108,11 +1098,6 @@ static void rhine_set_carrier(struct mii_if_info *mii)
 		       netif_carrier_ok(mii->dev));
 }
 
-static void rhine_check_media_task(struct net_device *dev)
-{
-	rhine_check_media(dev, 0);
-}
-
 static void init_registers(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
@@ -1166,8 +1151,8 @@ static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
 	if (quirks & rqRhineI) {
 		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
 
-		/* Do not call from ISR! */
-		msleep(1);
+		/* Can be called from ISR. Evil. */
+		mdelay(1);
 
 		/* 0x80 must be set immediately before turning it off */
 		iowrite8(0x80, ioaddr + MIICmd);
@@ -1257,16 +1242,6 @@ static int rhine_open(struct net_device *dev)
 static void rhine_tx_timeout(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
-
-	/*
-	 * Move bulk of work outside of interrupt context
-	 */
-	schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
-	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 
 	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1677,7 +1652,7 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	spin_lock(&rp->lock);
 
 	if (intr_status & IntrLinkChange)
-		schedule_work(&rp->check_media_task);
+		rhine_check_media(dev, 0);
 	if (intr_status & IntrStatsMax) {
 		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
 		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1927,9 +1902,6 @@ static int rhine_close(struct net_device *dev)
 	spin_unlock_irq(&rp->lock);
 
 	free_irq(rp->pdev->irq, dev);
-
-	flush_scheduled_work();
-
 	free_rbufs(dev);
 	free_tbufs(dev);
 	free_ring(dev);
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index 0e1ac338cac..bed6823d980 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1838,7 +1838,7 @@ struct net_device * __init arlan_probe(int unit)
 }
 
 #ifdef  MODULE
-int init_module(void)
+int __init init_module(void)
 {
 	int i = 0;
 
@@ -1860,7 +1860,7 @@ int init_module(void)
 }
 
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
 	int i = 0;
 	struct net_device *dev;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e2982a83ae4..7ed18cad29f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3271,6 +3271,9 @@ static int bcm43xx_init_board(struct bcm43xx_private *bcm)
 	bcm43xx_sysfs_register(bcm);
 	//FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
 
+	/*FIXME: This should be handled by softmac instead. */
+	schedule_work(&bcm->softmac->associnfo.work);
+
 	assert(err == 0);
 out:
 	return err;
@@ -3946,9 +3949,6 @@ static int bcm43xx_resume(struct pci_dev *pdev)
 
 	netif_device_attach(net_dev);
 	
-	/*FIXME: This should be handled by softmac instead. */
-	schedule_work(&bcm->softmac->associnfo.work);
-
 	dprintk(KERN_INFO PFX "Device resumed.\n");
 
 	return 0;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 06523e2a847..c2d0b09e041 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -812,7 +812,6 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	if (datalen > IEEE80211_DATA_LEN + 12) {
 		printk(KERN_DEBUG "%s: oversized monitor frame, "
 		       "data length = %d\n", dev->name, datalen);
-		err = -EIO;
 		stats->rx_length_errors++;
 		goto update_stats;
 	}
@@ -821,8 +820,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	if (!skb) {
 		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
 		       dev->name);
-		err = -ENOMEM;
-		goto drop;
+		goto update_stats;
 	}
 
 	/* Copy the 802.11 header to the skb */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index ff192e96268..dade4b90357 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -4306,7 +4306,7 @@ out:
  * Insertion of the module
  * I'm now quite proud of the multi-device support.
  */
-int init_module(void)
+int __init init_module(void)
 {
 	int ret = -EIO;		/* Return error if no cards found */
 	int i;