aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorMichael Chan <mchan@broadcom.com>2005-11-04 08:51:21 -0800
committerJohn W. Linville <linville@tuxdriver.com>2005-11-05 21:00:03 -0500
commite3648b3d8de3b37fae7acbb57db1e001a19cd3b7 (patch)
tree3de20299e878d60d7b5904f572f325f432e8891e /drivers/net
parent371377091dff14090cbe995d0a9291364f8583cb (diff)
[PATCH] bnx2: update firmware handshake for 5708
Dynamically determine the shared memory location where eeprom parameters are stored instead of using a fixed location. Add speed reporting to management firmware. This allows management firmware to know the current speed without contending for MII registers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/bnx2.c94
-rw-r--r--drivers/net/bnx2.h43
2 files changed, 122 insertions, 15 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 08086a9e541..affb67372e0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -437,6 +437,62 @@ alloc_mem_err:
}
static void
+bnx2_report_fw_link(struct bnx2 *bp)
+{
+ u32 fw_link_status = 0;
+
+ if (bp->link_up) {
+ u32 bmsr;
+
+ switch (bp->line_speed) {
+ case SPEED_10:
+ if (bp->duplex == DUPLEX_HALF)
+ fw_link_status = BNX2_LINK_STATUS_10HALF;
+ else
+ fw_link_status = BNX2_LINK_STATUS_10FULL;
+ break;
+ case SPEED_100:
+ if (bp->duplex == DUPLEX_HALF)
+ fw_link_status = BNX2_LINK_STATUS_100HALF;
+ else
+ fw_link_status = BNX2_LINK_STATUS_100FULL;
+ break;
+ case SPEED_1000:
+ if (bp->duplex == DUPLEX_HALF)
+ fw_link_status = BNX2_LINK_STATUS_1000HALF;
+ else
+ fw_link_status = BNX2_LINK_STATUS_1000FULL;
+ break;
+ case SPEED_2500:
+ if (bp->duplex == DUPLEX_HALF)
+ fw_link_status = BNX2_LINK_STATUS_2500HALF;
+ else
+ fw_link_status = BNX2_LINK_STATUS_2500FULL;
+ break;
+ }
+
+ fw_link_status |= BNX2_LINK_STATUS_LINK_UP;
+
+ if (bp->autoneg) {
+ fw_link_status |= BNX2_LINK_STATUS_AN_ENABLED;
+
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+
+ if (!(bmsr & BMSR_ANEGCOMPLETE) ||
+ bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)
+ fw_link_status |= BNX2_LINK_STATUS_PARALLEL_DET;
+ else
+ fw_link_status |= BNX2_LINK_STATUS_AN_COMPLETE;
+ }
+ }
+ else
+ fw_link_status = BNX2_LINK_STATUS_LINK_DOWN;
+
+ REG_WR_IND(bp, bp->shmem_base + BNX2_LINK_STATUS, fw_link_status);
+}
+
+static void
bnx2_report_link(struct bnx2 *bp)
{
if (bp->link_up) {
@@ -467,6 +523,8 @@ bnx2_report_link(struct bnx2 *bp)
netif_carrier_off(bp->dev);
printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
}
+
+ bnx2_report_fw_link(bp);
}
static void
@@ -1123,13 +1181,13 @@ bnx2_init_5708s_phy(struct bnx2 *bp)
bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG);
}
- val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_CONFIG) &
+ val = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG) &
BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK;
if (val) {
u32 is_backplane;
- is_backplane = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+ is_backplane = REG_RD_IND(bp, bp->shmem_base +
BNX2_SHARED_HW_CFG_CONFIG);
if (is_backplane & BNX2_SHARED_HW_CFG_PHY_BACKPLANE) {
bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
@@ -1280,13 +1338,13 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
- REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data);
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
/* wait for an acknowledgement. */
for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) {
udelay(5);
- val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB);
+ val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB);
if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ))
break;
@@ -1299,7 +1357,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
msg_data &= ~BNX2_DRV_MSG_CODE;
msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
- REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data);
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
bp->fw_timed_out = 1;
@@ -2935,7 +2993,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
/* Deposit a driver reset signature so the firmware knows that
* this is a soft reset. */
- REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE,
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE,
BNX2_DRV_RESET_SIGNATURE_MAGIC);
bp->fw_timed_out = 0;
@@ -4012,7 +4070,7 @@ bnx2_timer(unsigned long data)
goto bnx2_restart_timer;
msg = (u32) ++bp->fw_drv_pulse_wr_seq;
- REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg);
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg);
if ((bp->phy_flags & PHY_SERDES_FLAG) &&
(CHIP_NUM(bp) == CHIP_NUM_5706)) {
@@ -5483,10 +5541,18 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bnx2_init_nvram(bp);
+ reg = REG_RD_IND(bp, BNX2_SHM_HDR_SIGNATURE);
+
+ if ((reg & BNX2_SHM_HDR_SIGNATURE_SIG_MASK) ==
+ BNX2_SHM_HDR_SIGNATURE_SIG)
+ bp->shmem_base = REG_RD_IND(bp, BNX2_SHM_HDR_ADDR_0);
+ else
+ bp->shmem_base = HOST_VIEW_SHMEM_BASE;
+
/* Get the permanent MAC address. First we need to make sure the
* firmware is actually running.
*/
- reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE);
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_SIGNATURE);
if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
BNX2_DEV_INFO_SIGNATURE_MAGIC) {
@@ -5495,14 +5561,13 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
goto err_out_unmap;
}
- bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
- BNX2_DEV_INFO_BC_REV);
+ bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
- reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER);
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER);
bp->mac_addr[0] = (u8) (reg >> 8);
bp->mac_addr[1] = (u8) reg;
- reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER);
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_LOWER);
bp->mac_addr[2] = (u8) (reg >> 24);
bp->mac_addr[3] = (u8) (reg >> 16);
bp->mac_addr[4] = (u8) (reg >> 8);
@@ -5538,7 +5603,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->flags |= NO_WOL_FLAG;
if (CHIP_NUM(bp) == CHIP_NUM_5708) {
bp->phy_addr = 2;
- reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+ reg = REG_RD_IND(bp, bp->shmem_base +
BNX2_SHARED_HW_CFG_CONFIG);
if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
@@ -5562,8 +5627,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if (bp->phy_flags & PHY_SERDES_FLAG) {
bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
- reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
- BNX2_PORT_HW_CFG_CONFIG);
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
bp->autoneg = 0;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 4a2e6ba7cd7..012586e4ba0 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -3715,6 +3715,15 @@ struct l2_fhdr {
#define BNX2_MCP_ROM 0x00150000
#define BNX2_MCP_SCRATCH 0x00160000
+#define BNX2_SHM_HDR_SIGNATURE BNX2_MCP_SCRATCH
+#define BNX2_SHM_HDR_SIGNATURE_SIG_MASK 0xffff0000
+#define BNX2_SHM_HDR_SIGNATURE_SIG 0x53530000
+#define BNX2_SHM_HDR_SIGNATURE_VER_MASK 0x000000ff
+#define BNX2_SHM_HDR_SIGNATURE_VER_ONE 0x00000001
+
+#define BNX2_SHM_HDR_ADDR_0 BNX2_MCP_SCRATCH + 4
+#define BNX2_SHM_HDR_ADDR_1 BNX2_MCP_SCRATCH + 8
+
#define NUM_MC_HASH_REGISTERS 8
@@ -4052,6 +4061,8 @@ struct bnx2 {
u8 mac_addr[8];
+ u32 shmem_base;
+
u32 fw_ver;
int pm_cap;
@@ -4191,6 +4202,38 @@ struct fw_info {
#define BNX2_FW_MSG_STATUS_FAILURE 0x00ff0000
#define BNX2_LINK_STATUS 0x0000000c
+#define BNX2_LINK_STATUS_INIT_VALUE 0xffffffff
+#define BNX2_LINK_STATUS_LINK_UP 0x1
+#define BNX2_LINK_STATUS_LINK_DOWN 0x0
+#define BNX2_LINK_STATUS_SPEED_MASK 0x1e
+#define BNX2_LINK_STATUS_AN_INCOMPLETE (0<<1)
+#define BNX2_LINK_STATUS_10HALF (1<<1)
+#define BNX2_LINK_STATUS_10FULL (2<<1)
+#define BNX2_LINK_STATUS_100HALF (3<<1)
+#define BNX2_LINK_STATUS_100BASE_T4 (4<<1)
+#define BNX2_LINK_STATUS_100FULL (5<<1)
+#define BNX2_LINK_STATUS_1000HALF (6<<1)
+#define BNX2_LINK_STATUS_1000FULL (7<<1)
+#define BNX2_LINK_STATUS_2500HALF (8<<1)
+#define BNX2_LINK_STATUS_2500FULL (9<<1)
+#define BNX2_LINK_STATUS_AN_ENABLED (1<<5)
+#define BNX2_LINK_STATUS_AN_COMPLETE (1<<6)
+#define BNX2_LINK_STATUS_PARALLEL_DET (1<<7)
+#define BNX2_LINK_STATUS_RESERVED (1<<8)
+#define BNX2_LINK_STATUS_PARTNER_AD_1000FULL (1<<9)
+#define BNX2_LINK_STATUS_PARTNER_AD_1000HALF (1<<10)
+#define BNX2_LINK_STATUS_PARTNER_AD_100BT4 (1<<11)
+#define BNX2_LINK_STATUS_PARTNER_AD_100FULL (1<<12)
+#define BNX2_LINK_STATUS_PARTNER_AD_100HALF (1<<13)
+#define BNX2_LINK_STATUS_PARTNER_AD_10FULL (1<<14)
+#define BNX2_LINK_STATUS_PARTNER_AD_10HALF (1<<15)
+#define BNX2_LINK_STATUS_TX_FC_ENABLED (1<<16)
+#define BNX2_LINK_STATUS_RX_FC_ENABLED (1<<17)
+#define BNX2_LINK_STATUS_PARTNER_SYM_PAUSE_CAP (1<<18)
+#define BNX2_LINK_STATUS_PARTNER_ASYM_PAUSE_CAP (1<<19)
+#define BNX2_LINK_STATUS_SERDES_LINK (1<<20)
+#define BNX2_LINK_STATUS_PARTNER_AD_2500FULL (1<<21)
+#define BNX2_LINK_STATUS_PARTNER_AD_2500HALF (1<<22)
#define BNX2_DRV_PULSE_MB 0x00000010
#define BNX2_DRV_PULSE_SEQ_MASK 0x00007fff