diff options
author | David S. Miller <davem@davemloft.net> | 2005-05-18 22:50:10 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2005-05-18 22:50:10 -0700 |
commit | 59e6b4343299373bc10dd131ab5142f53ddd838a (patch) | |
tree | 1381e9d661f4ff83e89cb17678ce4813a90c4afb /drivers/net | |
parent | 15f9850d3c2d46f5851a424d2990a18b5bb5ebfd (diff) |
[TG3]: Refine DMA boundary setting.
Extract DMA boundary bit selection into a seperate
function, tg3_calc_dma_bndry(). Call this from
tg3_test_dma().
Make DMA test more reliable by using no DMA boundry
setting during the test. If the test passes, then
use the setting we selected before the test.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/tg3.c | 207 |
1 files changed, 163 insertions, 44 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 3df5b78d269..4ab9680ffbd 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8775,6 +8775,146 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) return 0; } +#define BOUNDARY_SINGLE_CACHELINE 1 +#define BOUNDARY_MULTI_CACHELINE 2 + +static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val) +{ + int cacheline_size; + u8 byte; + int goal; + + pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + /* On 5703 and later chips, the boundary bits have no + * effect. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) + goto out; + +#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC) + goal = BOUNDARY_MULTI_CACHELINE; +#else +#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA) + goal = BOUNDARY_SINGLE_CACHELINE; +#else + goal = 0; +#endif +#endif + + if (!goal) + goto out; + + /* PCI controllers on most RISC systems tend to disconnect + * when a device tries to burst across a cache-line boundary. + * Therefore, letting tg3 do so just wastes PCI bandwidth. + * + * Unfortunately, for PCI-E there are only limited + * write-side controls for this, and thus for reads + * we will still get the disconnects. We'll also waste + * these PCI cycles for both read and write for chips + * other than 5700 and 5701 which do not implement the + * boundary bits. + */ + if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX | + DMA_RWCTRL_WRITE_BNDRY_128_PCIX); + } else { + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + } + break; + + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX | + DMA_RWCTRL_WRITE_BNDRY_256_PCIX); + break; + + default: + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + break; + }; + } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE; + break; + } + /* fallthrough */ + case 128: + default: + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE; + break; + }; + } else { + switch (cacheline_size) { + case 16: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_16 | + DMA_RWCTRL_WRITE_BNDRY_16); + break; + } + /* fallthrough */ + case 32: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_32 | + DMA_RWCTRL_WRITE_BNDRY_32); + break; + } + /* fallthrough */ + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_64 | + DMA_RWCTRL_WRITE_BNDRY_64); + break; + } + /* fallthrough */ + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128 | + DMA_RWCTRL_WRITE_BNDRY_128); + break; + } + /* fallthrough */ + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256 | + DMA_RWCTRL_WRITE_BNDRY_256); + break; + case 512: + val |= (DMA_RWCTRL_READ_BNDRY_512 | + DMA_RWCTRL_WRITE_BNDRY_512); + break; + case 1024: + default: + val |= (DMA_RWCTRL_READ_BNDRY_1024 | + DMA_RWCTRL_WRITE_BNDRY_1024); + break; + }; + } + +out: + return val; +} + static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device) { struct tg3_internal_buffer_desc test_desc; @@ -8861,7 +9001,7 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm static int __devinit tg3_test_dma(struct tg3 *tp) { dma_addr_t buf_dma; - u32 *buf; + u32 *buf, saved_dma_rwctrl; int ret; buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma); @@ -8873,46 +9013,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) | (0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT)); -#ifndef CONFIG_X86 - { - u8 byte; - int cacheline_size; - pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); - - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - switch (cacheline_size) { - case 16: - case 32: - case 64: - case 128: - if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_384_PCIX; - break; - } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { - tp->dma_rwctrl &= - ~(DMA_RWCTRL_PCI_WRITE_CMD); - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_128_PCIE; - break; - } - /* fallthrough */ - case 256: - if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256; - else if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256_PCIX; - }; - } -#endif + tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl); if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { /* DMA read watermark not used on PCIE */ @@ -8931,7 +9032,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; - /* Set bit 23 to renable PCIX hw bug fix */ + /* Set bit 23 to enable PCIX hw bug fix */ tp->dma_rwctrl |= 0x009f0000; } else { tp->dma_rwctrl |= 0x001b000f; @@ -8972,6 +9073,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) goto out; + /* It is best to perform DMA test with maximum write burst size + * to expose the 5700/5701 write DMA bug. + */ + saved_dma_rwctrl = tp->dma_rwctrl; + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + while (1) { u32 *p = buf, i; @@ -9010,8 +9118,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (p[i] == i) continue; - if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) == - DMA_RWCTRL_WRITE_BNDRY_DISAB) { + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); break; @@ -9028,6 +9137,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp) break; } } + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + /* DMA test passed without adjusting DMA boundary, + * just restore the calculated DMA boundary + */ + tp->dma_rwctrl = saved_dma_rwctrl; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + } out: pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma); @@ -9429,6 +9546,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); + printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", + dev->name, tp->dma_rwctrl); return 0; |