diff options
author | David S. Miller <davem@davemloft.net> | 2008-10-08 14:56:41 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-10-08 14:56:41 -0700 |
commit | 4dd565134ece7e5d528d4c5288879310c54419e9 (patch) | |
tree | e08910d2d0feae0c030f8f01acc9b03eb760ad9a /drivers/net | |
parent | 071d7ab6649eb34a873a53e71635186e9117101d (diff) | |
parent | 69849375d6b13e94d08cdc94b49b11fbab454a0e (diff) |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/e1000e/ich8lan.c
drivers/net/e1000e/netdev.c
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/e1000e/e1000.h | 5 | ||||
-rw-r--r-- | drivers/net/e1000e/ethtool.c | 9 | ||||
-rw-r--r-- | drivers/net/e1000e/ich8lan.c | 78 | ||||
-rw-r--r-- | drivers/net/e1000e/netdev.c | 68 | ||||
-rw-r--r-- | drivers/net/e1000e/param.c | 30 |
5 files changed, 153 insertions, 37 deletions
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 0a1916b0419..c55de1c027a 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -270,7 +270,6 @@ struct e1000_adapter { struct net_device *netdev; struct pci_dev *pdev; struct net_device_stats net_stats; - spinlock_t stats_lock; /* prevent concurrent stats updates */ /* structs defined in e1000_hw.h */ struct e1000_hw hw; @@ -300,6 +299,8 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + struct work_struct downshift_task; + struct work_struct update_phy_task; }; struct e1000_info { @@ -321,6 +322,7 @@ struct e1000_info { #define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5) #define FLAG_HAS_SWSM_ON_LOAD (1 << 6) #define FLAG_HAS_JUMBO_FRAMES (1 << 7) +#define FLAG_READ_ONLY_NVM (1 << 8) #define FLAG_IS_ICH (1 << 9) #define FLAG_HAS_MSIX (1 << 10) #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) @@ -406,6 +408,7 @@ extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); +extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 52b762eb174..70c11c811a0 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -432,6 +432,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[11] = er32(TIDV); regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ + + /* ethtool doesn't use anything past this point, so all this + * code is likely legacy junk for apps that may or may not + * exist */ if (hw->phy.type == e1000_phy_m88) { e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); regs_buff[13] = (u32)phy_data; /* cable length */ @@ -447,7 +451,7 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ + regs_buff[21] = 0; /* was idle_errors */ e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ @@ -529,6 +533,9 @@ static int e1000_set_eeprom(struct net_device *netdev, if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) return -EFAULT; + if (adapter->flags & FLAG_READ_ONLY_NVM) + return -EINVAL; + max_len = hw->nvm.word_size * 2; first_word = eeprom->offset >> 1; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 692251b6091..523b9716a54 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -60,6 +60,7 @@ #define ICH_FLASH_HSFCTL 0x0006 #define ICH_FLASH_FADDR 0x0008 #define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_PR0 0x0074 #define ICH_FLASH_READ_COMMAND_TIMEOUT 500 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 @@ -152,6 +153,19 @@ union ich8_hws_flash_regacc { u16 regval; }; +/* ICH Flash Protected Region */ +union ich8_flash_protected_range { + struct ich8_pr { + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ + } range; + u32 regval; +}; + static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); @@ -371,6 +385,9 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) return 0; } +static DEFINE_MUTEX(nvm_mutex); +static pid_t nvm_owner = -1; + /** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure @@ -384,6 +401,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl; u32 timeout = PHY_CFG_TIMEOUT; + might_sleep(); + + if (!mutex_trylock(&nvm_mutex)) { + WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n", + nvm_owner); + mutex_lock(&nvm_mutex); + } + nvm_owner = current->pid; + while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; @@ -400,6 +426,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "FW or HW has locked the resource for too long.\n"); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); + nvm_owner = -1; + mutex_unlock(&nvm_mutex); return -E1000_ERR_CONFIG; } @@ -421,6 +449,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); + + nvm_owner = -1; + mutex_unlock(&nvm_mutex); } /** @@ -1386,6 +1417,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * programming failed. */ if (ret_val) { + /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); e1000_release_swflag_ich8lan(hw); return ret_val; @@ -1476,6 +1508,49 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) } /** + * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only + * @hw: pointer to the HW structure + * + * To prevent malicious write/erase of the NVM, set it to be read-only + * so that the hardware ignores all write/erase cycles of the NVM via + * the flash control registers. The shadow-ram copy of the NVM will + * still be updated, however any updates to this copy will not stick + * across driver reloads. + **/ +void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) +{ + union ich8_flash_protected_range pr0; + union ich8_hws_flash_status hsfsts; + u32 gfpreg; + s32 ret_val; + + ret_val = e1000_acquire_swflag_ich8lan(hw); + if (ret_val) + return; + + gfpreg = er32flash(ICH_FLASH_GFPREG); + + /* Write-protect GbE Sector of NVM */ + pr0.regval = er32flash(ICH_FLASH_PR0); + pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK; + pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK); + pr0.range.wpe = true; + ew32flash(ICH_FLASH_PR0, pr0.regval); + + /* + * Lock down a subset of GbE Flash Control Registers, e.g. + * PR0 to prevent the write-protection from being lifted. + * Once FLOCKDN is set, the registers protected by it cannot + * be written until FLOCKDN is cleared by a hardware reset. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + hsfsts.hsf_status.flockdn = true; + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); + + e1000_release_swflag_ich8lan(hw); +} + +/** * e1000_write_flash_data_ich8lan - Writes bytes to the NVM * @hw: pointer to the HW structure * @offset: The offset (in bytes) of the byte/word to read. @@ -1822,6 +1897,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); + /* release the swflag because it is not reset by hardware reset */ + e1000_release_swflag_ich8lan(hw); + ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { /* diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 24d05cb7005..1b72749979c 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k2" +#define DRV_VERSION "0.3.3.3-k6" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -1117,6 +1117,14 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) writel(0, adapter->hw.hw_addr + rx_ring->tail); } +static void e1000e_downshift_workaround(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, downshift_task); + + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); +} + /** * e1000_intr_msi - Interrupt Handler * @irq: interrupt number @@ -1141,7 +1149,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- For packet buffer work-around on @@ -1207,7 +1215,7 @@ static irqreturn_t e1000_intr(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- @@ -2905,8 +2913,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); - spin_lock_init(&adapter->stats_lock); - set_bit(__E1000_DOWN, &adapter->state); return 0; } @@ -3221,6 +3227,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p) return 0; } +/** + * e1000e_update_phy_task - work thread to update phy + * @work: pointer to our work struct + * + * this worker thread exists because we must acquire a + * semaphore to read the phy, which we could msleep while + * waiting for it, and we can't msleep in a timer. + **/ +static void e1000e_update_phy_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, update_phy_task); + e1000_get_phy_info(&adapter->hw); +} + /* * Need to wait a few seconds after link up to get diagnostic information from * the phy @@ -3228,7 +3249,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - e1000_get_phy_info(&adapter->hw); + schedule_work(&adapter->update_phy_task); } /** @@ -3239,10 +3260,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned long irq_flags; - u16 phy_tmp; - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF /* * Prevent stats update while adapter is being reset, or if the pci @@ -3253,14 +3270,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if (pci_channel_offline(pdev)) return; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - - /* - * these counters are modified from e1000_adjust_tbi_stats, - * called from the interrupt context, so they must only - * be written while holding adapter->stats_lock - */ - adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); @@ -3332,21 +3341,10 @@ void e1000e_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - /* Management Stats */ adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } /** @@ -3358,10 +3356,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; int ret_val; - unsigned long irq_flags; - - - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { @@ -3392,8 +3386,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) phy->stat1000 = 0; phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); } - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } static void e1000_print_link_info(struct e1000_adapter *adapter) @@ -4822,6 +4814,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_hw_init; + if ((adapter->flags & FLAG_IS_ICH) && + (adapter->flags & FLAG_READ_ONLY_NVM)) + e1000e_write_protect_nvm_ich8lan(&adapter->hw); + hw->mac.ops.get_bus_info(&adapter->hw); adapter->hw.phy.autoneg_wait_to_complete = 0; @@ -4912,6 +4908,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); + INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); + INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index f46db6cda48..77a3d7207a5 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -142,6 +142,15 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); */ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); +/* + * Write Protect NVM + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -415,4 +424,25 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) opt.def); } } + { /* Write-protect NVM */ + const struct e1000_option opt = { + .type = enable_option, + .name = "Write-protect NVM", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (adapter->flags & FLAG_IS_ICH) { + if (num_WriteProtectNVM > bd) { + unsigned int write_protect_nvm = WriteProtectNVM[bd]; + e1000_validate_option(&write_protect_nvm, &opt, + adapter); + if (write_protect_nvm) + adapter->flags |= FLAG_READ_ONLY_NVM; + } else { + if (opt.def) + adapter->flags |= FLAG_READ_ONLY_NVM; + } + } + } } |