Merge branch 'linux-2.6'

50 files changed, 544 insertions, 516 deletions

diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 750a46f4bc5..ad6b8a5b657 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -506,6 +506,7 @@ int lance_open (struct net_device *dev)
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(lance_open);
 
 int lance_close (struct net_device *dev)
 {
@@ -521,6 +522,7 @@ int lance_close (struct net_device *dev)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(lance_close);
 
 void lance_tx_timeout(struct net_device *dev)
 {
@@ -529,7 +531,7 @@ void lance_tx_timeout(struct net_device *dev)
 	dev->trans_start = jiffies;
 	netif_wake_queue (dev);
 }
-
+EXPORT_SYMBOL_GPL(lance_tx_timeout);
 
 int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 {
@@ -586,6 +588,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(lance_start_xmit);
 
 /* taken from the depca driver via a2065.c */
 static void lance_load_multicast (struct net_device *dev)
@@ -654,6 +657,7 @@ void lance_set_multicast (struct net_device *dev)
 	if (!stopped)
 		netif_start_queue (dev);
 }
+EXPORT_SYMBOL_GPL(lance_set_multicast);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void lance_poll(struct net_device *dev)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6ddc911e7d1..3c798ae5c34 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -471,7 +471,6 @@ static int atl1_get_permanent_address(struct atl1_hw *hw)
 			memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
 			return 0;
 		}
-		return 1;
 	}
 
 	/* see if SPI FLAGS exist ? */
@@ -637,22 +636,6 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
 }
 
 /*
- * Force the PHY into power saving mode using vendor magic.
- */
-#ifdef CONFIG_PM
-static void atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
-	atl1_write_phy_reg(hw, MII_DBG_ADDR, 0);
-	atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E);
-	atl1_write_phy_reg(hw, MII_DBG_ADDR, 2);
-	atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
-	atl1_write_phy_reg(hw, MII_DBG_ADDR, 3);
-	atl1_write_phy_reg(hw, MII_DBG_DATA, 0);
-
-}
-#endif
-
-/*
  * Resets the PHY and make all config validate
  * hw - Struct containing variables accessed by shared code
  *
@@ -2860,7 +2843,6 @@ disable_wol:
 	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
 	iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
 	ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
-	atl1_phy_enter_power_saving(hw);
 	hw->phy_configured = false;
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
 exit:
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 4b46e68183e..367b6d46270 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -5724,14 +5724,12 @@ bnx2_reset_task(struct work_struct *work)
 	if (!netif_running(bp->dev))
 		return;
 
-	bp->in_reset_task = 1;
 	bnx2_netif_stop(bp);
 
 	bnx2_init_nic(bp);
 
 	atomic_set(&bp->intr_sem, 1);
 	bnx2_netif_start(bp);
-	bp->in_reset_task = 0;
 }
 
 static void
@@ -5907,12 +5905,7 @@ bnx2_close(struct net_device *dev)
 	struct bnx2 *bp = netdev_priv(dev);
 	u32 reset_code;
 
-	/* Calling flush_scheduled_work() may deadlock because
-	 * linkwatch_event() may be on the workqueue and it will try to get
-	 * the rtnl_lock which we are holding.
-	 */
-	while (bp->in_reset_task)
-		msleep(1);
+	cancel_work_sync(&bp->reset_task);
 
 	bnx2_disable_int_sync(bp);
 	bnx2_napi_disable(bp);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 1eaf5bb3d9c..2377cc13bf6 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6656,7 +6656,6 @@ struct bnx2 {
 	int			current_interval;
 	struct			timer_list timer;
 	struct work_struct	reset_task;
-	int			in_reset_task;
 
 	/* Used to synchronize phy accesses. */
 	spinlock_t		phy_lock;
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 7bdb5af3595..70cba64732c 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -6,7 +6,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
  * Based on code from Michael Chan's bnx2 driver
  * UDP CSUM errata workaround by Arik Gendelman
  * Slowpath rework by Vladislav Zolotarov
@@ -74,7 +75,7 @@ static char version[] __devinitdata =
 	"Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
 	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
-MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
+MODULE_AUTHOR("Eliezer Tamir");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f0c0d31e7c..8e68d06510a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -6,7 +6,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
  * Based on code from Michael Chan's bnx2 driver
  */
 
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index dcaecc53bdb..370686eef97 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -6,7 +6,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
  */
 
 #ifndef BNX2X_INIT_H
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 287a6191873..075fd547421 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1766,16 +1766,20 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
 	mutex_lock(&ehea_bcmc_regs.lock);
 
 	/* Deregister old MAC in pHYP */
-	ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
-	if (ret)
-		goto out_upregs;
+	if (port->state == EHEA_PORT_UP) {
+		ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+		if (ret)
+			goto out_upregs;
+	}
 
 	port->mac_addr = cb0->port_mac_addr << 16;
 
 	/* Register new MAC in pHYP */
-	ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
-	if (ret)
-		goto out_upregs;
+	if (port->state == EHEA_PORT_UP) {
+		ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+		if (ret)
+			goto out_upregs;
+	}
 
 	ret = 0;
 
@@ -2601,7 +2605,8 @@ static int ehea_stop(struct net_device *dev)
 	if (netif_msg_ifdown(port))
 		ehea_info("disabling port %s", dev->name);
 
-	flush_scheduled_work();
+	cancel_work_sync(&port->reset_task);
+
 	mutex_lock(&port->port_lock);
 	netif_stop_queue(dev);
 	port_napi_disable(port);
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 46a90e9ec56..c05cb159c77 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -400,26 +400,31 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
 	mutex_unlock(&priv->lock);
 }
 
-/*
- * Wait until the PHY operation is complete.
- */
-static int wait_phy_ready(struct enc28j60_net *priv)
+static unsigned long msec20_to_jiffies;
+
+static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
 {
-	unsigned long timeout = jiffies + 20 * HZ / 1000;
-	int ret = 1;
+	unsigned long timeout = jiffies + msec20_to_jiffies;
 
 	/* 20 msec timeout read */
-	while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) {
+	while ((nolock_regb_read(priv, reg) & mask) != val) {
 		if (time_after(jiffies, timeout)) {
 			if (netif_msg_drv(priv))
-				printk(KERN_DEBUG DRV_NAME
-					": PHY ready timeout!\n");
-			ret = 0;
-			break;
+				dev_dbg(&priv->spi->dev,
+					"reg %02x ready timeout!\n", reg);
+			return -ETIMEDOUT;
 		}
 		cpu_relax();
 	}
-	return ret;
+	return 0;
+}
+
+/*
+ * Wait until the PHY operation is complete.
+ */
+static int wait_phy_ready(struct enc28j60_net *priv)
+{
+	return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
 }
 
 /*
@@ -594,6 +599,32 @@ static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 	nolock_regw_write(priv, ETXNDL, end);
 }
 
+/*
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive.  (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
+{
+	if (netif_msg_drv(priv))
+		dev_dbg(&priv->spi->dev, "%s power...\n",
+				is_low ? "low" : "high");
+
+	mutex_lock(&priv->lock);
+	if (is_low) {
+		nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+		poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
+		poll_ready(priv, ECON1, ECON1_TXRTS, 0);
+		/* ECON2_VRPS was set during initialization */
+		nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+	} else {
+		nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+		poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+		/* caller sets ECON1_RXEN */
+	}
+	mutex_unlock(&priv->lock);
+}
+
 static int enc28j60_hw_init(struct enc28j60_net *priv)
 {
 	u8 reg;
@@ -612,8 +643,8 @@ static int enc28j60_hw_init(struct enc28j60_net *priv)
 	priv->tx_retry_count = 0;
 	priv->max_pk_counter = 0;
 	priv->rxfilter = RXFILTER_NORMAL;
-	/* enable address auto increment */
-	nolock_regb_write(priv, ECON2, ECON2_AUTOINC);
+	/* enable address auto increment and voltage regulator powersave */
+	nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
 
 	nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 	nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
@@ -690,7 +721,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv)
 
 static void enc28j60_hw_enable(struct enc28j60_net *priv)
 {
-	/* enable interrutps */
+	/* enable interrupts */
 	if (netif_msg_hw(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
 			__FUNCTION__);
@@ -726,15 +757,12 @@ enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
 	int ret = 0;
 
 	if (!priv->hw_enable) {
-		if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) {
+		/* link is in low power mode now; duplex setting
+		 * will take effect on next enc28j60_hw_init().
+		 */
+		if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
 			priv->full_duplex = (duplex == DUPLEX_FULL);
-			if (!enc28j60_hw_init(priv)) {
-				if (netif_msg_drv(priv))
-					dev_err(&ndev->dev,
-						"hw_reset() failed\n");
-				ret = -EINVAL;
-			}
-		} else {
+		else {
 			if (netif_msg_link(priv))
 				dev_warn(&ndev->dev,
 					"unsupported link setting\n");
@@ -1307,7 +1335,8 @@ static int enc28j60_net_open(struct net_device *dev)
 		}
 		return -EADDRNOTAVAIL;
 	}
-	/* Reset the hardware here */
+	/* Reset the hardware here (and take it out of low power mode) */
+	enc28j60_lowpower(priv, false);
 	enc28j60_hw_disable(priv);
 	if (!enc28j60_hw_init(priv)) {
 		if (netif_msg_ifup(priv))
@@ -1337,6 +1366,7 @@ static int enc28j60_net_close(struct net_device *dev)
 		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
 
 	enc28j60_hw_disable(priv);
+	enc28j60_lowpower(priv, true);
 	netif_stop_queue(dev);
 
 	return 0;
@@ -1537,6 +1567,8 @@ static int __devinit enc28j60_probe(struct spi_device *spi)
 	dev->watchdog_timeo = TX_TIMEOUT;
 	SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
 
+	enc28j60_lowpower(priv, true);
+
 	ret = register_netdev(dev);
 	if (ret) {
 		if (netif_msg_probe(priv))
@@ -1556,7 +1588,7 @@ error_alloc:
 	return ret;
 }
 
-static int enc28j60_remove(struct spi_device *spi)
+static int __devexit enc28j60_remove(struct spi_device *spi)
 {
 	struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
 
@@ -1573,15 +1605,16 @@ static int enc28j60_remove(struct spi_device *spi)
 static struct spi_driver enc28j60_driver = {
 	.driver = {
 		   .name = DRV_NAME,
-		   .bus = &spi_bus_type,
 		   .owner = THIS_MODULE,
-		   },
+	 },
 	.probe = enc28j60_probe,
 	.remove = __devexit_p(enc28j60_remove),
 };
 
 static int __init enc28j60_init(void)
 {
+	msec20_to_jiffies = msecs_to_jiffies(20);
+
 	return spi_register_driver(&enc28j60_driver);
 }
 
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 5f9c42e7a7f..329edd9c08f 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -78,7 +78,7 @@ module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0);
 MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
 
 #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
-		NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN )
+		NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
 static int debug = -1;	/* the above default */
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "debugging messages level");
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9eca97fb0a5..2cb24476329 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3273,6 +3273,20 @@ static void nv_link_irq(struct net_device *dev)
 	dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name);
 }
 
+static void nv_msi_workaround(struct fe_priv *np)
+{
+
+	/* Need to toggle the msi irq mask within the ethernet device,
+	 * otherwise, future interrupts will not be detected.
+	 */
+	if (np->msi_flags & NV_MSI_ENABLED) {
+		u8 __iomem *base = np->base;
+
+		writel(0, base + NvRegMSIIrqMask);
+		writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+	}
+}
+
 static irqreturn_t nv_nic_irq(int foo, void *data)
 {
 	struct net_device *dev = (struct net_device *) data;
@@ -3295,6 +3309,8 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 		if (!(events & np->irqmask))
 			break;
 
+		nv_msi_workaround(np);
+
 		spin_lock(&np->lock);
 		nv_tx_done(dev);
 		spin_unlock(&np->lock);
@@ -3410,6 +3426,8 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 		if (!(events & np->irqmask))
 			break;
 
+		nv_msi_workaround(np);
+
 		spin_lock(&np->lock);
 		nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
 		spin_unlock(&np->lock);
@@ -3750,6 +3768,8 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data)
 	if (!(events & NVREG_IRQ_TIMER))
 		return IRQ_RETVAL(0);
 
+	nv_msi_workaround(np);
+
 	spin_lock(&np->lock);
 	np->intr_test = 1;
 	spin_unlock(&np->lock);
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index dde9c7e6408..00bc7fbb6b3 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -959,7 +959,7 @@ static int epp_close(struct net_device *dev)
 	unsigned char tmp[1];
 
 	bc->work_running = 0;
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&bc->run_work);
 	bc->stat = EPP_DCDBIT;
 	tmp[0] = 0;
 	pp->ops->epp_write_addr(pp, tmp, 1, 0);
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig
index 0d3e7380bad..70a3272ee99 100644
--- a/drivers/net/ibm_newemac/Kconfig
+++ b/drivers/net/ibm_newemac/Kconfig
@@ -1,6 +1,7 @@
 config IBM_NEW_EMAC
 	tristate "IBM EMAC Ethernet support"
 	depends on PPC_DCR && PPC_MERGE
+	select CRC32
 	help
 	  This driver supports the IBM EMAC family of Ethernet controllers
 	  typically found on 4xx embedded PowerPC chips, but also on the
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 9b358f61ed7..679a0826780 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -577,12 +577,12 @@ static void ipg_nic_set_multicast_list(struct net_device *dev)
 		/* NIC to be configured in promiscuous mode. */
 		receivemode = IPG_RM_RECEIVEALLFRAMES;
 	} else if ((dev->flags & IFF_ALLMULTI) ||
-		   (dev->flags & IFF_MULTICAST &
+		   ((dev->flags & IFF_MULTICAST) &&
 		    (dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) {
 		/* NIC to be configured to receive all multicast
 		 * frames. */
 		receivemode |= IPG_RM_RECEIVEMULTICAST;
-	} else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) {
+	} else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) {
 		/* NIC to be configured to receive selected
 		 * multicast addresses. */
 		receivemode |= IPG_RM_RECEIVEMULTICASTHASH;
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index ce816ba9c40..e6317557a53 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -329,6 +329,7 @@ config PXA_FICP
 config MCS_FIR
 	tristate "MosChip MCS7780 IrDA-USB dongle"
 	depends on IRDA && USB && EXPERIMENTAL
+	select CRC32
 	help
 	  Say Y or M here if you want to build support for the MosChip
 	  MCS7780 IrDA-USB bridge device driver.
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 6321b059ce1..2f38e847e2c 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -58,8 +58,8 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
 
 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 {
-	hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES;
-	hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES;
+	hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+	hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
 	hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
 
 	/* PHY ops are filled in by default properly for Fiber only */
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 8cb29f5b103..da4c4fb9706 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -776,7 +776,6 @@ struct netxen_hardware_context {
 
 	u8 revision_id;
 	u16 board_type;
-	u16 max_ports;
 	struct netxen_board_info boardcfg;
 	u32 xg_linkup;
 	u32 qg_linksup;
@@ -863,6 +862,7 @@ struct netxen_adapter {
 	unsigned char mac_addr[ETH_ALEN];
 	int mtu;
 	int portnum;
+	u8 physical_port;
 
 	struct work_struct watchdog_task;
 	struct timer_list watchdog_timer;
@@ -1034,7 +1034,6 @@ int netxen_rom_se(struct netxen_adapter *adapter, int addr);
 
 /* Functions from netxen_nic_isr.c */
 void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
-void netxen_initialize_adapter_hw(struct netxen_adapter *adapter);
 void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
 		   struct pci_dev **used_dev);
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
@@ -1077,20 +1076,6 @@ static const struct netxen_brdinfo netxen_boards[] = {
 
 #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards)
 
-static inline void get_brd_port_by_type(u32 type, int *ports)
-{
-	int i, found = 0;
-	for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) {
-		if (netxen_boards[i].brdtype == type) {
-			*ports = netxen_boards[i].ports;
-			found = 1;
-			break;
-		}
-	}
-	if (!found)
-		*ports = 0;
-}
-
 static inline void get_brd_name_by_type(u32 type, char *name)
 {
 	int i, found = 0;
@@ -1169,5 +1154,4 @@ extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
 
 extern struct ethtool_ops netxen_nic_ethtool_ops;
 
-extern int physical_port[];	/* physical port # from virtual port.*/
 #endif				/* __NETXEN_NIC_H_ */
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 6e98d830eef..723487bf200 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -369,7 +369,7 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 		for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) {
 			/* GB: port specific registers */
 			if (mode == 0 && i >= 19)
-				window = physical_port[adapter->portnum] *
+				window = adapter->physical_port *
 					NETXEN_NIC_PORT_WINDOW;
 
 			NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode].
@@ -527,7 +527,7 @@ netxen_nic_get_pauseparam(struct net_device *dev,
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	__u32 val;
-	int port = physical_port[adapter->portnum];
+	int port = adapter->physical_port;
 
 	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
 		if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
@@ -573,7 +573,7 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	__u32 val;
-	int port = physical_port[adapter->portnum];
+	int port = adapter->physical_port;
 	/* read mode */
 	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
 		if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index af735646825..c43d06b8de9 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -396,11 +396,8 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 	}
 	adapter->intr_scheme = readl(
 		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
-	printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
-			adapter->intr_scheme);
 	adapter->msi_mode = readl(
 		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
-	DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
 
 	addr = netxen_alloc(adapter->ahw.pdev,
 			    sizeof(struct netxen_ring_ctx) +
@@ -408,8 +405,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 			    (dma_addr_t *) & adapter->ctx_desc_phys_addr,
 			    &adapter->ctx_desc_pdev);
 
-	printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n",
-	       (unsigned long long) adapter->ctx_desc_phys_addr);
 	if (addr == NULL) {
 		DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
 		err = -ENOMEM;
@@ -429,8 +424,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 			    adapter->max_tx_desc_count,
 			    (dma_addr_t *) & hw->cmd_desc_phys_addr,
 			    &adapter->ahw.cmd_desc_pdev);
-	printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n",
-	       (unsigned long long) hw->cmd_desc_phys_addr);
 
 	if (addr == NULL) {
 		DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
@@ -1032,15 +1025,15 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 {
 	netxen_nic_write_w0(adapter,
-			NETXEN_NIU_GB_MAX_FRAME_SIZE(
-				physical_port[adapter->portnum]), new_mtu);
+		NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
+		new_mtu);
 	return 0;
 }
 
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 {
 	new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
-	if (physical_port[adapter->portnum] == 0)
+	if (adapter->physical_port == 0)
 		netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
 				new_mtu);
 	else
@@ -1051,7 +1044,7 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 
 void netxen_nic_init_niu_gb(struct netxen_adapter *adapter)
 {
-	netxen_niu_gbe_init_port(adapter, physical_port[adapter->portnum]);
+	netxen_niu_gbe_init_port(adapter, adapter->physical_port);
 }
 
 void
@@ -1127,7 +1120,6 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 
 void netxen_nic_flash_print(struct netxen_adapter *adapter)
 {
-	int valid = 1;
 	u32 fw_major = 0;
 	u32 fw_minor = 0;
 	u32 fw_build = 0;
@@ -1137,70 +1129,62 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 	__le32 *ptr32;
 
 	struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
-	if (board_info->magic != NETXEN_BDINFO_MAGIC) {
-		printk
-		    ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n",
-		     board_info->magic, NETXEN_BDINFO_MAGIC);
-		valid = 0;
-	}
-	if (board_info->header_version != NETXEN_BDINFO_VERSION) {
-		printk("NetXen Unknown board config version."
-		       " Read %x, expected %x\n",
-		       board_info->header_version, NETXEN_BDINFO_VERSION);
-		valid = 0;
-	}
-	if (valid) {
-		ptr32 = (u32 *)&serial_num;
-		addr = NETXEN_USER_START +
-		       offsetof(struct netxen_new_user_info, serial_num);
-		for (i = 0; i < 8; i++) {
-			if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
-				printk("%s: ERROR reading %s board userarea.\n",
-				       netxen_nic_driver_name,
-				       netxen_nic_driver_name);
-				return;
-			}
-			ptr32++;
-			addr += sizeof(u32);
+
+	adapter->driver_mismatch = 0;
+
+	ptr32 = (u32 *)&serial_num;
+	addr = NETXEN_USER_START +
+	       offsetof(struct netxen_new_user_info, serial_num);
+	for (i = 0; i < 8; i++) {
+		if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
+			printk("%s: ERROR reading %s board userarea.\n",
+			       netxen_nic_driver_name,
+			       netxen_nic_driver_name);
+			adapter->driver_mismatch = 1;
+			return;
 		}
+		ptr32++;
+		addr += sizeof(u32);
+	}
+
+	fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
+					      NETXEN_FW_VERSION_MAJOR));
+	fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
+					      NETXEN_FW_VERSION_MINOR));
+	fw_build =
+	    readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
 
+	if (adapter->portnum == 0) {
 		get_brd_name_by_type(board_info->board_type, brd_name);
 
 		printk("NetXen %s Board S/N %s  Chip id 0x%x\n",
-		       brd_name, serial_num, board_info->chip_id);
-
-		printk("NetXen %s Board #%d, Chip id 0x%x\n",
-		       board_info->board_type == 0x0b ? "XGB" : "GBE",
-		       board_info->board_num, board_info->chip_id);
-		fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
-						      NETXEN_FW_VERSION_MAJOR));
-		fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
-						      NETXEN_FW_VERSION_MINOR));
-		fw_build =
-		    readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
-
-		printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor,
-		       fw_build);
+				brd_name, serial_num, board_info->chip_id);
+		printk("NetXen Firmware version %d.%d.%d\n", fw_major,
+				fw_minor, fw_build);
 	}
+
 	if (fw_major != _NETXEN_NIC_LINUX_MAJOR) {
-		printk(KERN_ERR "The mismatch in driver version and firmware "
-		       "version major number\n"
-		       "Driver version major number = %d \t"
-		       "Firmware version major number = %d \n",
-		       _NETXEN_NIC_LINUX_MAJOR, fw_major);
 		adapter->driver_mismatch = 1;
 	}
 	if (fw_minor != _NETXEN_NIC_LINUX_MINOR &&
 			fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) {
-		printk(KERN_ERR "The mismatch in driver version and firmware "
-		       "version minor number\n"
-		       "Driver version minor number = %d \t"
-		       "Firmware version minor number = %d \n",
-		       _NETXEN_NIC_LINUX_MINOR, fw_minor);
 		adapter->driver_mismatch = 1;
 	}
-	if (adapter->driver_mismatch)
-		printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n",
-		       fw_major, fw_minor);
+	if (adapter->driver_mismatch) {
+		printk(KERN_ERR "%s: driver and firmware version mismatch\n",
+				adapter->netdev->name);
+		return;
+	}
+
+	switch (adapter->ahw.board_type) {
+	case NETXEN_NIC_GBE:
+		dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
+				adapter->netdev->name);
+		break;
+	case NETXEN_NIC_XGBE:
+		dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
+				adapter->netdev->name);
+		break;
+	}
 }
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 45fa33e0cb9..70d1b22ced2 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -203,21 +203,6 @@ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter)
 	}
 }
 
-void netxen_initialize_adapter_hw(struct netxen_adapter *adapter)
-{
-	int ports = 0;
-	struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
-
-	if (netxen_nic_get_board_info(adapter) != 0)
-		printk("%s: Error getting board config info.\n",
-		       netxen_nic_driver_name);
-	get_brd_port_by_type(board_info->board_type, &ports);
-	if (ports == 0)
-		printk(KERN_ERR "%s: Unknown board type\n",
-		       netxen_nic_driver_name);
-	adapter->ahw.max_ports = ports;
-}
-
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 {
 	switch (adapter->ahw.board_type) {
@@ -765,18 +750,13 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
 
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 {
-	int addr, val, status;
+	int addr, val;
 	int n, i;
 	int init_delay = 0;
 	struct crb_addr_pair *buf;
 	u32 off;
 
 	/* resetall */
-	status = netxen_nic_get_board_info(adapter);
-	if (status)
-		printk("%s: netxen_pinit_from_rom: Error getting board info\n",
-		       netxen_nic_driver_name);
-
 	netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
 				    NETXEN_ROMBUS_RESET);
 
@@ -860,10 +840,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				netxen_nic_pci_change_crbwindow(adapter, 1);
 			}
 			if (init_delay == 1) {
-				msleep(2000);
+				msleep(1000);
 				init_delay = 0;
 			}
-			msleep(20);
+			msleep(1);
 		}
 		kfree(buf);
 
@@ -938,12 +918,28 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 
 void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 {
+	int i;
+
 	if (adapter->dummy_dma.addr) {
-		pci_free_consistent(adapter->ahw.pdev,
+		i = 100;
+		do {
+			if (dma_watchdog_shutdown_request(adapter) == 1)
+				break;
+			msleep(50);
+			if (dma_watchdog_shutdown_poll_result(adapter) == 1)
+				break;
+		} while (--i);
+
+		if (i) {
+			pci_free_consistent(adapter->ahw.pdev,
 				    NETXEN_HOST_DUMMY_DMA_SIZE,
 				    adapter->dummy_dma.addr,
 				    adapter->dummy_dma.phys_addr);
-		adapter->dummy_dma.addr = NULL;
+			adapter->dummy_dma.addr = NULL;
+		} else {
+			printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+					adapter->netdev->name);
+		}
 	}
 }
 
diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c
index f487615f406..96cec41f901 100644
--- a/drivers/net/netxen/netxen_nic_isr.c
+++ b/drivers/net/netxen/netxen_nic_isr.c
@@ -145,7 +145,7 @@ static void netxen_nic_isr_other(struct netxen_adapter *adapter)
 
 	/* verify the offset */
 	val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
-	val = val >> physical_port[adapter->portnum];
+	val = val >> adapter->physical_port;
 	if (val == adapter->ahw.qg_linksup)
 		return;
 
@@ -199,7 +199,7 @@ void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter)
 
 	/* WINDOW = 1 */
 	val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
-	val >>= (physical_port[adapter->portnum] * 8);
+	val >>= (adapter->physical_port * 8);
 	val &= 0xff;
 
 	if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) {
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 7144c255ce5..6797ed069f1 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -70,17 +70,15 @@ static void netxen_nic_poll_controller(struct net_device *netdev);
 static irqreturn_t netxen_intr(int irq, void *data);
 static irqreturn_t netxen_msi_intr(int irq, void *data);
 
-int physical_port[] = {0, 1, 2, 3};
-
 /*  PCI Device ID Table  */
 static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
-	{PCI_DEVICE(0x4040, 0x0001)},
-	{PCI_DEVICE(0x4040, 0x0002)},
-	{PCI_DEVICE(0x4040, 0x0003)},
-	{PCI_DEVICE(0x4040, 0x0004)},
-	{PCI_DEVICE(0x4040, 0x0005)},
-	{PCI_DEVICE(0x4040, 0x0024)},
-	{PCI_DEVICE(0x4040, 0x0025)},
+	{PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)},
+	{PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)},
+	{PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)},
+	{PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)},
+	{PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)},
+	{PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)},
+	{PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)},
 	{0,}
 };
 
@@ -288,10 +286,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int pci_func_id = PCI_FUNC(pdev->devfn);
 	DECLARE_MAC_BUF(mac);
 
-	printk(KERN_INFO "%s \n", netxen_nic_driver_string);
+	if (pci_func_id == 0)
+		printk(KERN_INFO "%s \n", netxen_nic_driver_string);
 
 	if (pdev->class != 0x020000) {
-		printk(KERN_ERR"NetXen function %d, class %x will not "
+		printk(KERN_DEBUG "NetXen function %d, class %x will not "
 				"be enabled.\n",pci_func_id, pdev->class);
 		return -ENODEV;
 	}
@@ -450,8 +449,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	adapter->curr_window = 255;
 
-	/* initialize the adapter */
-	netxen_initialize_adapter_hw(adapter);
+	if (netxen_nic_get_board_info(adapter) != 0) {
+		printk("%s: Error getting board config info.\n",
+		       netxen_nic_driver_name);
+		err = -EIO;
+		goto err_out_iounmap;
+	}
 
 	/*
 	 *  Adapter in our case is quad port so initialize it before
@@ -530,17 +533,15 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netxen_initialize_adapter_sw(adapter);	/* initialize the buffers in adapter */
 
 	/* Mezz cards have PCI function 0,2,3 enabled */
-	if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ)
-		&& (pci_func_id >= 2))
+	switch (adapter->ahw.boardcfg.board_type) {
+	case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
+	case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
+		if (pci_func_id >= 2)
 			adapter->portnum = pci_func_id - 2;
-
-#ifdef CONFIG_IA64
-	if(adapter->portnum == 0) {
-		netxen_pinit_from_rom(adapter, 0);
-		udelay(500);
-		netxen_load_firmware(adapter);
+		break;
+	default:
+		break;
 	}
-#endif
 
 	init_timer(&adapter->watchdog_timer);
 	adapter->ahw.xg_linkup = 0;
@@ -613,11 +614,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 				err = -ENODEV;
 				goto err_out_free_dev;
 		    }
+		} else {
+			writel(0, NETXEN_CRB_NORMALIZE(adapter,
+						CRB_CMDPEG_STATE));
+			netxen_pinit_from_rom(adapter, 0);
+			msleep(1);
+			netxen_load_firmware(adapter);
+			netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
 		}
 
 		/* clear the register for future unloads/loads */
 		writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
-		printk(KERN_INFO "State: 0x%0x\n",
+		dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n",
 			readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
 
 		/*
@@ -639,9 +647,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/*
 	 * See if the firmware gave us a virtual-physical port mapping.
 	 */
+	adapter->physical_port = adapter->portnum;
 	i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum)));
 	if (i != 0x55555555)
-		physical_port[adapter->portnum] = i;
+		adapter->physical_port = i;
 
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
@@ -654,22 +663,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_free_dev;
 	}
 
+	netxen_nic_flash_print(adapter);
 	pci_set_drvdata(pdev, adapter);
 
-	switch (adapter->ahw.board_type) {
-		case NETXEN_NIC_GBE:
-			printk(KERN_INFO "%s: QUAD GbE board initialized\n",
-			       netxen_nic_driver_name);
-			break;
-
-		case NETXEN_NIC_XGBE:
-			printk(KERN_INFO "%s: XGbE board initialized\n",
-					netxen_nic_driver_name);
-			break;
-	}
-
-	adapter->driver_mismatch = 0;
-
 	return 0;
 
 err_out_free_dev:
@@ -760,55 +756,8 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	vfree(adapter->cmd_buf_arr);
 
-	if (adapter->portnum == 0) {
-		if (init_firmware_done) {
-			i = 100;
-			do {
-				if (dma_watchdog_shutdown_request(adapter) == 1)
-					break;
-				msleep(100);
-				if (dma_watchdog_shutdown_poll_result(adapter) == 1)
-					break;
-			} while (--i);
-
-			if (i == 0)
-				printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
-						netdev->name);
-
-			/* clear the register for future unloads/loads */
-			writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
-			printk(KERN_INFO "State: 0x%0x\n",
-				readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
-
-			/* leave the hw in the same state as reboot */
-			writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
-			netxen_pinit_from_rom(adapter, 0);
-			msleep(1);
-			netxen_load_firmware(adapter);
-			netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
-		}
-
-		/* clear the register for future unloads/loads */
-		writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
-		printk(KERN_INFO "State: 0x%0x\n",
-			readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
-
-		i = 100;
-		do {
-			if (dma_watchdog_shutdown_request(adapter) == 1)
-				break;
-			msleep(100);
-			if (dma_watchdog_shutdown_poll_result(adapter) == 1)
-				break;
-		} while (--i);
-
-		if (i) {
-			netxen_free_adapter_offload(adapter);
-		} else {
-			printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
-					netdev->name);
-		}
-	}
+	if (adapter->portnum == 0)
+		netxen_free_adapter_offload(adapter);
 
 	if (adapter->irq)
 		free_irq(adapter->irq, adapter);
@@ -840,13 +789,15 @@ static int netxen_nic_open(struct net_device *netdev)
 	irq_handler_t handler;
 	unsigned long flags = IRQF_SAMPLE_RANDOM;
 
+	if (adapter->driver_mismatch)
+		return -EIO;
+
 	if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
 		err = netxen_init_firmware(adapter);
 		if (err != 0) {
 			printk(KERN_ERR "Failed to init firmware\n");
 			return -EIO;
 		}
-		netxen_nic_flash_print(adapter);
 
 		/* setup all the resources for the Phantom... */
 		/* this include the descriptors for rcv, tx, and status */
@@ -895,14 +846,12 @@ static int netxen_nic_open(struct net_device *netdev)
 	if (adapter->set_mtu)
 		adapter->set_mtu(adapter, netdev->mtu);
 
-	if (!adapter->driver_mismatch)
-		mod_timer(&adapter->watchdog_timer, jiffies);
+	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	napi_enable(&adapter->napi);
 	netxen_nic_enable_int(adapter);
 
-	if (!adapter->driver_mismatch)
-		netif_start_queue(netdev);
+	netif_start_queue(netdev);
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 1c852a76c80..a3bc7cc67a6 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -94,7 +94,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	long timeout = 0;
 	long result = 0;
 	long restore = 0;
-	long phy = physical_port[adapter->portnum];
+	long phy = adapter->physical_port;
 	__u32 address;
 	__u32 command;
 	__u32 status;
@@ -190,7 +190,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 	long timeout = 0;
 	long result = 0;
 	long restore = 0;
-	long phy = physical_port[adapter->portnum];
+	long phy = adapter->physical_port;
 	__u32 address;
 	__u32 command;
 	__u32 status;
@@ -456,7 +456,7 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 
 int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
 {
-	u32 portnum = physical_port[adapter->portnum];
+	u32 portnum = adapter->physical_port;
 
 	netxen_crb_writelit_adapter(adapter,
 		NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447);
@@ -573,7 +573,7 @@ static int netxen_niu_macaddr_get(struct netxen_adapter *adapter,
 {
 	u32 stationhigh;
 	u32 stationlow;
-	int phy = physical_port[adapter->portnum];
+	int phy = adapter->physical_port;
 	u8 val[8];
 
 	if (addr == NULL)
@@ -604,7 +604,7 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
 {
 	u8 temp[4];
 	u32 val;
-	int phy = physical_port[adapter->portnum];
+	int phy = adapter->physical_port;
 	unsigned char mac_addr[6];
 	int i;
 	DECLARE_MAC_BUF(mac);
@@ -724,7 +724,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 {
 	__u32 mac_cfg0;
-	u32 port = physical_port[adapter->portnum];
+	u32 port = adapter->physical_port;
 
 	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
@@ -740,7 +740,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 {
 	__u32 mac_cfg;
-	u32 port = physical_port[adapter->portnum];
+	u32 port = adapter->physical_port;
 
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
@@ -757,7 +757,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 				    netxen_niu_prom_mode_t mode)
 {
 	__u32 reg;
-	u32 port = physical_port[adapter->portnum];
+	u32 port = adapter->physical_port;
 
 	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
@@ -814,7 +814,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
 			      netxen_ethernet_macaddr_t addr)
 {
-	int phy = physical_port[adapter->portnum];
+	int phy = adapter->physical_port;
 	u8 temp[4];
 	u32 val;
 
@@ -867,7 +867,7 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
 int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
 			      netxen_ethernet_macaddr_t * addr)
 {
-	int phy = physical_port[adapter->portnum];
+	int phy = adapter->physical_port;
 	u32 stationhigh;
 	u32 stationlow;
 	u8 val[8];
@@ -896,7 +896,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 				       netxen_niu_prom_mode_t mode)
 {
 	__u32 reg;
-	u32 port = physical_port[adapter->portnum];
+	u32 port = adapter->physical_port;
 
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 58a26a47af2..fc6f4b8c64b 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -341,12 +341,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb)
 	struct pppox_sock *relay_po;
 
 	if (sk->sk_state & PPPOX_BOUND) {
-		struct pppoe_hdr *ph = pppoe_hdr(skb);
-		int len = ntohs(ph->length);
-		skb_pull_rcsum(skb, sizeof(struct pppoe_hdr));
-		if (pskb_trim_rcsum(skb, len))
-			goto abort_kfree;
-
 		ppp_input(&po->chan, skb);
 	} else if (sk->sk_state & PPPOX_RELAY) {
 		relay_po = get_item_by_addr(&po->pppoe_relay);
@@ -357,7 +351,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb)
 		if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0)
 			goto abort_put;
 
-		skb_pull(skb, sizeof(struct pppoe_hdr));
 		if (!__pppoe_xmit(sk_pppox(relay_po), skb))
 			goto abort_put;
 	} else {
@@ -388,6 +381,7 @@ static int pppoe_rcv(struct sk_buff *skb,
 {
 	struct pppoe_hdr *ph;
 	struct pppox_sock *po;
+	int len;
 
 	if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
 		goto out;
@@ -399,10 +393,21 @@ static int pppoe_rcv(struct sk_buff *skb,
 		goto drop;
 
 	ph = pppoe_hdr(skb);
+	len = ntohs(ph->length);
+
+	skb_pull_rcsum(skb, sizeof(*ph));
+	if (skb->len < len)
+		goto drop;
 
 	po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
-	if (po != NULL)
-		return sk_receive_skb(sk_pppox(po), skb, 0);
+	if (!po)
+		goto drop;
+
+	if (pskb_trim_rcsum(skb, len))
+		goto drop;
+
+	return sk_receive_skb(sk_pppox(po), skb, 0);
+
 drop:
 	kfree_skb(skb);
 out:
@@ -427,12 +432,12 @@ static int pppoe_disc_rcv(struct sk_buff *skb,
 	if (dev_net(dev) != &init_net)
 		goto abort;
 
-	if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
-		goto abort;
-
 	if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
 		goto out;
 
+	if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
+		goto abort;
+
 	ph = pppoe_hdr(skb);
 	if (ph->code != PADT_CODE)
 		goto abort;
@@ -937,12 +942,10 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock,
 	m->msg_namelen = 0;
 
 	if (skb) {
-		struct pppoe_hdr *ph = pppoe_hdr(skb);
-		const int len = ntohs(ph->length);
-
-		error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len);
+		total_len = min_t(size_t, total_len, skb->len);
+		error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
 		if (error == 0)
-			error = len;
+			error = total_len;
 	}
 
 	kfree_skb(skb);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 70cfdb46aa2..f9298827a76 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -783,14 +783,18 @@ static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock,
 	err = 0;
 	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
 				flags & MSG_DONTWAIT, &err);
-	if (skb) {
-		err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data,
-				     skb->len);
-		if (err < 0)
-			goto do_skb_free;
-		err = skb->len;
-	}
-do_skb_free:
+	if (!skb)
+		goto end;
+
+	if (len > skb->len)
+		len = skb->len;
+	else if (len < skb->len)
+		msg->msg_flags |= MSG_TRUNC;
+
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len);
+	if (likely(err == 0))
+		err = len;
+
 	kfree_skb(skb);
 end:
 	return err;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 169edc15492..858b191517b 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -733,7 +733,7 @@ static void r6040_timer(unsigned long data)
 	}
 
 	/* Timer active again */
-	mod_timer(&lp->timer, jiffies + round_jiffies(HZ));
+	mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
 }
 
 /* Read/set MAC address routines */
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index d3f749c72d4..790db89db34 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -733,8 +733,10 @@ void falcon_fini_rx(struct efx_rx_queue *rx_queue)
 			continue;
 		break;
 	}
-	if (rc)
+	if (rc) {
 		EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue);
+		efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
+	}
 
 	/* Remove RX descriptor ring from card */
 	EFX_ZERO_OWORD(rx_desc_ptr);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3bb60530d4d..c8a5ef2d75f 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -118,6 +118,7 @@ static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
@@ -4404,7 +4405,9 @@ static int sky2_resume(struct pci_dev *pdev)
 			if (err) {
 				printk(KERN_ERR PFX "%s: could not up: %d\n",
 				       dev->name, err);
+				rtnl_lock();
 				dev_close(dev);
+				rtnl_unlock();
 				goto out;
 			}
 		}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 4e280020518..e2ee91a6ae7 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -136,7 +136,6 @@ struct smc911x_local {
 
 	/* work queue */
 	struct work_struct phy_configure;
-	int work_pending;
 
 	int tx_throttle;
 	spinlock_t lock;
@@ -960,11 +959,11 @@ static void smc911x_phy_configure(struct work_struct *work)
 	 * We should not be called if phy_type is zero.
 	 */
 	if (lp->phy_type == 0)
-		 goto smc911x_phy_configure_exit_nolock;
+		return;
 
 	if (smc911x_phy_reset(dev, phyaddr)) {
 		printk("%s: PHY reset timed out\n", dev->name);
-		goto smc911x_phy_configure_exit_nolock;
+		return;
 	}
 	spin_lock_irqsave(&lp->lock, flags);
 
@@ -1033,8 +1032,6 @@ static void smc911x_phy_configure(struct work_struct *work)
 
 smc911x_phy_configure_exit:
 	spin_unlock_irqrestore(&lp->lock, flags);
-smc911x_phy_configure_exit_nolock:
-	lp->work_pending = 0;
 }
 
 /*
@@ -1356,11 +1353,8 @@ static void smc911x_timeout(struct net_device *dev)
 	 * smc911x_phy_configure() calls msleep() which calls schedule_timeout()
 	 * which calls schedule().	 Hence we use a work queue.
 	 */
-	if (lp->phy_type != 0) {
-		if (schedule_work(&lp->phy_configure)) {
-			lp->work_pending = 1;
-		}
-	}
+	if (lp->phy_type != 0)
+		schedule_work(&lp->phy_configure);
 
 	/* We can accept TX packets again */
 	dev->trans_start = jiffies;
@@ -1531,16 +1525,8 @@ static int smc911x_close(struct net_device *dev)
 	if (lp->phy_type != 0) {
 		/* We need to ensure that no calls to
 		 * smc911x_phy_configure are pending.
-
-		 * flush_scheduled_work() cannot be called because we
-		 * are running with the netlink semaphore held (from
-		 * devinet_ioctl()) and the pending work queue
-		 * contains linkwatch_event() (scheduled by
-		 * netif_carrier_off() above). linkwatch_event() also
-		 * wants the netlink semaphore.
 		 */
-		while (lp->work_pending)
-			schedule();
+		cancel_work_sync(&lp->phy_configure);
 		smc911x_phy_powerdown(dev, lp->mii.phy_id);
 	}
 
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index a188e33484e..f2051b209da 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1016,15 +1016,8 @@ static void smc_phy_powerdown(struct net_device *dev)
 
 	/* We need to ensure that no calls to smc_phy_configure are
 	   pending.
-
-	   flush_scheduled_work() cannot be called because we are
-	   running with the netlink semaphore held (from
-	   devinet_ioctl()) and the pending work queue contains
-	   linkwatch_event() (scheduled by netif_carrier_off()
-	   above). linkwatch_event() also wants the netlink semaphore.
 	*/
-	while(lp->work_pending)
-		yield();
+	cancel_work_sync(&lp->phy_configure);
 
 	bmcr = smc_phy_read(dev, phy, MII_BMCR);
 	smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
@@ -1161,7 +1154,6 @@ static void smc_phy_configure(struct work_struct *work)
 smc_phy_configure_exit:
 	SMC_SELECT_BANK(lp, 2);
 	spin_unlock_irq(&lp->lock);
-	lp->work_pending = 0;
 }
 
 /*
@@ -1389,11 +1381,8 @@ static void smc_timeout(struct net_device *dev)
 	 * smc_phy_configure() calls msleep() which calls schedule_timeout()
 	 * which calls schedule().  Hence we use a work queue.
 	 */
-	if (lp->phy_type != 0) {
-		if (schedule_work(&lp->phy_configure)) {
-			lp->work_pending = 1;
-		}
-	}
+	if (lp->phy_type != 0)
+		schedule_work(&lp->phy_configure);
 
 	/* We can accept TX packets again */
 	dev->trans_start = jiffies;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 69e97a1cb1c..8606818653f 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -93,14 +93,14 @@
 #define SMC_insw(a, r, p, l) 	insw ((unsigned long *)((a) + (r)), p, l)
 # endif
 /* check if the mac in reg is valid */
-#define SMC_GET_MAC_ADDR(addr)					\
+#define SMC_GET_MAC_ADDR(lp, addr)				\
 	do {							\
 		unsigned int __v;				\
-		__v = SMC_inw(ioaddr, ADDR0_REG);		\
+		__v = SMC_inw(ioaddr, ADDR0_REG(lp));		\
 		addr[0] = __v; addr[1] = __v >> 8;		\
-		__v = SMC_inw(ioaddr, ADDR1_REG);		\
+		__v = SMC_inw(ioaddr, ADDR1_REG(lp));		\
 		addr[2] = __v; addr[3] = __v >> 8;		\
-		__v = SMC_inw(ioaddr, ADDR2_REG);		\
+		__v = SMC_inw(ioaddr, ADDR2_REG(lp));		\
 		addr[4] = __v; addr[5] = __v >> 8;		\
 		if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) {		\
 			random_ether_addr(addr);		\
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 07b3f77e762..cc4bde85254 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.92"
-#define DRV_MODULE_RELDATE	"May 2, 2008"
+#define DRV_MODULE_VERSION	"3.92.1"
+#define DRV_MODULE_RELDATE	"June 9, 2008"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1295,6 +1295,21 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 				     GRC_LCLCTRL_GPIO_OUTPUT0 |
 				     GRC_LCLCTRL_GPIO_OUTPUT1),
 				    100);
+		} else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+			/* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
+			u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
+					     GRC_LCLCTRL_GPIO_OE1 |
+					     GRC_LCLCTRL_GPIO_OE2 |
+					     GRC_LCLCTRL_GPIO_OUTPUT0 |
+					     GRC_LCLCTRL_GPIO_OUTPUT1 |
+					     tp->grc_local_ctrl;
+			tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+			grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2;
+			tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+			grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0;
+			tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
 		} else {
 			u32 no_gpio2;
 			u32 grc_local_ctrl = 0;
@@ -3168,8 +3183,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
 	err |= tg3_readphy(tp, MII_BMCR, &bmcr);
 
 	if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
-	    (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
-	     tp->link_config.flowctrl == tp->link_config.active_flowctrl) {
+	    (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
 		/* do nothing, just check for link up at the end */
 	} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
 		u32 adv, new_adv;
@@ -8599,7 +8613,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		   (cmd->speed == SPEED_1000))
 		return -EINVAL;
 	else if ((cmd->speed == SPEED_1000) &&
-		 (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+		 (tp->tg3_flags & TG3_FLAG_10_100_ONLY))
 		return -EINVAL;
 
 	tg3_full_lock(tp, 0);
@@ -11768,6 +11782,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 
+	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+		/* Turn off the debug UART. */
+		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+			/* Keep VMain power. */
+			tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
+					      GRC_LCLCTRL_GPIO_OUTPUT0;
+	}
+
 	/* Force the chip into D0. */
 	err = tg3_set_power_state(tp, PCI_D0);
 	if (err) {
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 55670b5eb61..af8d2c436ef 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -731,7 +731,7 @@ static void tulip_down (struct net_device *dev)
 	void __iomem *ioaddr = tp->base_addr;
 	unsigned long flags;
 
-	flush_scheduled_work();
+	cancel_work_sync(&tp->media_work);
 
 #ifdef CONFIG_TULIP_NAPI
 	napi_disable(&tp->napi);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 0ce07a339c7..7ab94c825b5 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -313,6 +313,21 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv,
 
 	switch (tun->flags & TUN_TYPE_MASK) {
 	case TUN_TUN_DEV:
+		if (tun->flags & TUN_NO_PI) {
+			switch (skb->data[0] & 0xf0) {
+			case 0x40:
+				pi.proto = htons(ETH_P_IP);
+				break;
+			case 0x60:
+				pi.proto = htons(ETH_P_IPV6);
+				break;
+			default:
+				tun->dev->stats.rx_dropped++;
+				kfree_skb(skb);
+				return -EINVAL;
+			}
+		}
+
 		skb_reset_mac_header(skb);
 		skb->protocol = pi.proto;
 		skb->dev = tun->dev;
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 0dcfc031026..7c66b052f55 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -706,7 +706,7 @@ static void kaweth_kill_urbs(struct kaweth_device *kaweth)
 	usb_kill_urb(kaweth->rx_urb);
 	usb_kill_urb(kaweth->tx_urb);
 
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&kaweth->lowmem_work);
 
 	/* a scheduled work may have resubmitted,
 	   we hit them again */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 5450eac9e26..4452306d532 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -44,11 +44,15 @@ struct virtnet_info
 	/* The skb we couldn't send because buffers were full. */
 	struct sk_buff *last_xmit_skb;
 
+	/* If we need to free in a timer, this is it. */
+	struct timer_list xmit_free_timer;
+
 	/* Number of input buffers, and max we've ever had. */
 	unsigned int num, max;
 
 	/* For cleaning up after transmission. */
 	struct tasklet_struct tasklet;
+	bool free_in_tasklet;
 
 	/* Receive & send queues. */
 	struct sk_buff_head recv;
@@ -72,7 +76,7 @@ static void skb_xmit_done(struct virtqueue *svq)
 	/* Suppress further interrupts. */
 	svq->vq_ops->disable_cb(svq);
 
-	/* We were waiting for more output buffers. */
+	/* We were probably waiting for more output buffers. */
 	netif_wake_queue(vi->dev);
 
 	/* Make sure we re-xmit last_xmit_skb: if there are no more packets
@@ -94,9 +98,7 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 	BUG_ON(len > MAX_PACKET_LEN);
 
 	skb_trim(skb, len);
-	skb->protocol = eth_type_trans(skb, dev);
-	pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
-		 ntohs(skb->protocol), skb->len, skb->pkt_type);
+
 	dev->stats.rx_bytes += skb->len;
 	dev->stats.rx_packets++;
 
@@ -106,6 +108,10 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 			goto frame_err;
 	}
 
+	skb->protocol = eth_type_trans(skb, dev);
+	pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
+		 ntohs(skb->protocol), skb->len, skb->pkt_type);
+
 	if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
 		pr_debug("GSO!\n");
 		switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
@@ -238,9 +244,25 @@ static void free_old_xmit_skbs(struct virtnet_info *vi)
 	}
 }
 
+/* If the virtio transport doesn't always notify us when all in-flight packets
+ * are consumed, we fall back to using this function on a timer to free them. */
+static void xmit_free(unsigned long data)
+{
+	struct virtnet_info *vi = (void *)data;
+
+	netif_tx_lock(vi->dev);
+
+	free_old_xmit_skbs(vi);
+
+	if (!skb_queue_empty(&vi->send))
+		mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+	netif_tx_unlock(vi->dev);
+}
+
 static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 {
-	int num;
+	int num, err;
 	struct scatterlist sg[2+MAX_SKB_FRAGS];
 	struct virtio_net_hdr *hdr;
 	const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
@@ -283,7 +305,11 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 	vnet_hdr_to_sg(sg, skb);
 	num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 
-	return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+	err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+	if (!err && !vi->free_in_tasklet)
+		mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+	return err;
 }
 
 static void xmit_tasklet(unsigned long data)
@@ -295,6 +321,8 @@ static void xmit_tasklet(unsigned long data)
 		vi->svq->vq_ops->kick(vi->svq);
 		vi->last_xmit_skb = NULL;
 	}
+	if (vi->free_in_tasklet)
+		free_old_xmit_skbs(vi);
 	netif_tx_unlock_bh(vi->dev);
 }
 
@@ -435,6 +463,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 	vi->vdev = vdev;
 	vdev->priv = vi;
 
+	/* If they give us a callback when all buffers are done, we don't need
+	 * the timer. */
+	vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
+
 	/* We expect two virtqueues, receive then send. */
 	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
 	if (IS_ERR(vi->rvq)) {
@@ -454,6 +486,9 @@ static int virtnet_probe(struct virtio_device *vdev)
 
 	tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
 
+	if (!vi->free_in_tasklet)
+		setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi);
+
 	err = register_netdev(dev);
 	if (err) {
 		pr_debug("virtio_net: registering device failed\n");
@@ -491,6 +526,9 @@ static void virtnet_remove(struct virtio_device *vdev)
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
+	if (!vi->free_in_tasklet)
+		del_timer_sync(&vi->xmit_free_timer);
+
 	/* Free our skbs in send and recv queues, if any. */
 	while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
 		kfree_skb(skb);
@@ -514,7 +552,7 @@ static struct virtio_device_id id_table[] = {
 static unsigned int features[] = {
 	VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
 	VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
-	VIRTIO_NET_F_HOST_ECN,
+	VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY,
 };
 
 static struct virtio_driver virtio_net = {
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index dfa4bdd5597..d3db298c05f 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -630,7 +630,6 @@ struct b43_pio {
 
 /* Context information for a noise calculation (Link Quality). */
 struct b43_noise_calculation {
-	u8 channel_at_start;
 	bool calculation_running;
 	u8 nr_samples;
 	s8 samples[8][4];
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 6dcbb3c87e7..e23f2f172bd 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -795,24 +795,49 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 {
 	struct b43_dmaring *ring;
 	int err;
-	int nr_slots;
 	dma_addr_t dma_test;
 
 	ring = kzalloc(sizeof(*ring), GFP_KERNEL);
 	if (!ring)
 		goto out;
-	ring->type = type;
 
-	nr_slots = B43_RXRING_SLOTS;
+	ring->nr_slots = B43_RXRING_SLOTS;
 	if (for_tx)
-		nr_slots = B43_TXRING_SLOTS;
+		ring->nr_slots = B43_TXRING_SLOTS;
 
-	ring->meta = kcalloc(nr_slots, sizeof(struct b43_dmadesc_meta),
+	ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta),
 			     GFP_KERNEL);
 	if (!ring->meta)
 		goto err_kfree_ring;
+
+	ring->type = type;
+	ring->dev = dev;
+	ring->mmio_base = b43_dmacontroller_base(type, controller_index);
+	ring->index = controller_index;
+	if (type == B43_DMA_64BIT)
+		ring->ops = &dma64_ops;
+	else
+		ring->ops = &dma32_ops;
 	if (for_tx) {
-		ring->txhdr_cache = kcalloc(nr_slots,
+		ring->tx = 1;
+		ring->current_slot = -1;
+	} else {
+		if (ring->index == 0) {
+			ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE;
+			ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET;
+		} else if (ring->index == 3) {
+			ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE;
+			ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET;
+		} else
+			B43_WARN_ON(1);
+	}
+	spin_lock_init(&ring->lock);
+#ifdef CONFIG_B43_DEBUG
+	ring->last_injected_overflow = jiffies;
+#endif
+
+	if (for_tx) {
+		ring->txhdr_cache = kcalloc(ring->nr_slots,
 					    b43_txhdr_size(dev),
 					    GFP_KERNEL);
 		if (!ring->txhdr_cache)
@@ -828,7 +853,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 					  b43_txhdr_size(dev), 1)) {
 			/* ugh realloc */
 			kfree(ring->txhdr_cache);
-			ring->txhdr_cache = kcalloc(nr_slots,
+			ring->txhdr_cache = kcalloc(ring->nr_slots,
 						    b43_txhdr_size(dev),
 						    GFP_KERNEL | GFP_DMA);
 			if (!ring->txhdr_cache)
@@ -853,32 +878,6 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 				 DMA_TO_DEVICE);
 	}
 
-	ring->dev = dev;
-	ring->nr_slots = nr_slots;
-	ring->mmio_base = b43_dmacontroller_base(type, controller_index);
-	ring->index = controller_index;
-	if (type == B43_DMA_64BIT)
-		ring->ops = &dma64_ops;
-	else
-		ring->ops = &dma32_ops;
-	if (for_tx) {
-		ring->tx = 1;
-		ring->current_slot = -1;
-	} else {
-		if (ring->index == 0) {
-			ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE;
-			ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET;
-		} else if (ring->index == 3) {
-			ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE;
-			ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET;
-		} else
-			B43_WARN_ON(1);
-	}
-	spin_lock_init(&ring->lock);
-#ifdef CONFIG_B43_DEBUG
-	ring->last_injected_overflow = jiffies;
-#endif
-
 	err = alloc_ringmemory(ring);
 	if (err)
 		goto err_kfree_txhdr_cache;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6c3d9ea0a9f..fa4b0d8b74a 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1145,7 +1145,6 @@ static void b43_generate_noise_sample(struct b43_wldev *dev)
 	b43_jssi_write(dev, 0x7F7F7F7F);
 	b43_write32(dev, B43_MMIO_MACCMD,
 		    b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
-	B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
 }
 
 static void b43_calculate_link_quality(struct b43_wldev *dev)
@@ -1154,7 +1153,6 @@ static void b43_calculate_link_quality(struct b43_wldev *dev)
 
 	if (dev->noisecalc.calculation_running)
 		return;
-	dev->noisecalc.channel_at_start = dev->phy.channel;
 	dev->noisecalc.calculation_running = 1;
 	dev->noisecalc.nr_samples = 0;
 
@@ -1171,9 +1169,16 @@ static void handle_irq_noise(struct b43_wldev *dev)
 
 	/* Bottom half of Link Quality calculation. */
 
+	/* Possible race condition: It might be possible that the user
+	 * changed to a different channel in the meantime since we
+	 * started the calculation. We ignore that fact, since it's
+	 * not really that much of a problem. The background noise is
+	 * an estimation only anyway. Slightly wrong results will get damped
+	 * by the averaging of the 8 sample rounds. Additionally the
+	 * value is shortlived. So it will be replaced by the next noise
+	 * calculation round soon. */
+
 	B43_WARN_ON(!dev->noisecalc.calculation_running);
-	if (dev->noisecalc.channel_at_start != phy->channel)
-		goto drop_calculation;
 	*((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
 	if (noise[0] == 0x7F || noise[1] == 0x7F ||
 	    noise[2] == 0x7F || noise[3] == 0x7F)
@@ -1214,11 +1219,10 @@ static void handle_irq_noise(struct b43_wldev *dev)
 			average -= 48;
 
 		dev->stats.link_noise = average;
-	      drop_calculation:
 		dev->noisecalc.calculation_running = 0;
 		return;
 	}
-      generate_new:
+generate_new:
 	b43_generate_noise_sample(dev);
 }
 
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 20d387f6658..f7aec9309d0 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -682,7 +682,13 @@ static int prism2_close(struct net_device *dev)
 		netif_device_detach(dev);
 	}
 
-	flush_scheduled_work();
+	cancel_work_sync(&local->reset_queue);
+	cancel_work_sync(&local->set_multicast_list_queue);
+	cancel_work_sync(&local->set_tim_queue);
+#ifndef PRISM2_NO_STATION_MODES
+	cancel_work_sync(&local->info_queue);
+#endif
+	cancel_work_sync(&local->comms_qual_update);
 
 	module_put(local->hw_module);
 
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 72933677482..6e704608947 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1753,6 +1753,8 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio)
 
 		if (priv->workqueue) {
 			cancel_delayed_work(&priv->request_scan);
+			cancel_delayed_work(&priv->request_direct_scan);
+			cancel_delayed_work(&priv->request_passive_scan);
 			cancel_delayed_work(&priv->scan_event);
 		}
 		queue_work(priv->workqueue, &priv->down);
@@ -2005,6 +2007,8 @@ static void ipw_irq_tasklet(struct ipw_priv *priv)
 		wake_up_interruptible(&priv->wait_command_queue);
 		priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
 		cancel_delayed_work(&priv->request_scan);
+		cancel_delayed_work(&priv->request_direct_scan);
+		cancel_delayed_work(&priv->request_passive_scan);
 		cancel_delayed_work(&priv->scan_event);
 		schedule_work(&priv->link_down);
 		queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ);
@@ -4712,6 +4716,12 @@ static void ipw_rx_notification(struct ipw_priv *priv,
 			priv->status &= ~STATUS_SCAN_FORCED;
 #endif				/* CONFIG_IPW2200_MONITOR */
 
+			/* Do queued direct scans first */
+			if (priv->status & STATUS_DIRECT_SCAN_PENDING) {
+				queue_delayed_work(priv->workqueue,
+						   &priv->request_direct_scan, 0);
+			}
+
 			if (!(priv->status & (STATUS_ASSOCIATED |
 					      STATUS_ASSOCIATING |
 					      STATUS_ROAMING |
@@ -6267,7 +6277,7 @@ static void ipw_add_scan_channels(struct ipw_priv *priv,
 	}
 }
 
-static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
+static int ipw_request_scan_helper(struct ipw_priv *priv, int type, int direct)
 {
 	struct ipw_scan_request_ext scan;
 	int err = 0, scan_type;
@@ -6278,22 +6288,31 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
 
 	mutex_lock(&priv->mutex);
 
+	if (direct && (priv->direct_scan_ssid_len == 0)) {
+		IPW_DEBUG_HC("Direct scan requested but no SSID to scan for\n");
+		priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+		goto done;
+	}
+
 	if (priv->status & STATUS_SCANNING) {
-		IPW_DEBUG_HC("Concurrent scan requested.  Ignoring.\n");
-		priv->status |= STATUS_SCAN_PENDING;
+		IPW_DEBUG_HC("Concurrent scan requested.  Queuing.\n");
+		priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+					STATUS_SCAN_PENDING;
 		goto done;
 	}
 
 	if (!(priv->status & STATUS_SCAN_FORCED) &&
 	    priv->status & STATUS_SCAN_ABORTING) {
 		IPW_DEBUG_HC("Scan request while abort pending.  Queuing.\n");
-		priv->status |= STATUS_SCAN_PENDING;
+		priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+					STATUS_SCAN_PENDING;
 		goto done;
 	}
 
 	if (priv->status & STATUS_RF_KILL_MASK) {
-		IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n");
-		priv->status |= STATUS_SCAN_PENDING;
+		IPW_DEBUG_HC("Queuing scan due to RF Kill activation\n");
+		priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+					STATUS_SCAN_PENDING;
 		goto done;
 	}
 
@@ -6321,6 +6340,7 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
 		cpu_to_le16(20);
 
   	scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
+	scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
 
 #ifdef CONFIG_IPW2200_MONITOR
 	if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
@@ -6360,13 +6380,23 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
 			cpu_to_le16(2000);
 	} else {
 #endif				/* CONFIG_IPW2200_MONITOR */
-		/* If we are roaming, then make this a directed scan for the
-		 * current network.  Otherwise, ensure that every other scan
-		 * is a fast channel hop scan */
-		if ((priv->status & STATUS_ROAMING)
-		    || (!(priv->status & STATUS_ASSOCIATED)
-			&& (priv->config & CFG_STATIC_ESSID)
-			&& (le32_to_cpu(scan.full_scan_index) % 2))) {
+		/* Honor direct scans first, otherwise if we are roaming make
+		 * this a direct scan for the current network.  Finally,
+		 * ensure that every other scan is a fast channel hop scan */
+		if (direct) {
+			err = ipw_send_ssid(priv, priv->direct_scan_ssid,
+			                    priv->direct_scan_ssid_len);
+			if (err) {
+				IPW_DEBUG_HC("Attempt to send SSID command  "
+					     "failed\n");
+				goto done;
+			}
+
+			scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
+		} else if ((priv->status & STATUS_ROAMING)
+			   || (!(priv->status & STATUS_ASSOCIATED)
+			       && (priv->config & CFG_STATIC_ESSID)
+			       && (le32_to_cpu(scan.full_scan_index) % 2))) {
 			err = ipw_send_ssid(priv, priv->essid, priv->essid_len);
 			if (err) {
 				IPW_DEBUG_HC("Attempt to send SSID command "
@@ -6391,7 +6421,12 @@ send_request:
 	}
 
 	priv->status |= STATUS_SCANNING;
-	priv->status &= ~STATUS_SCAN_PENDING;
+	if (direct) {
+		priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+		priv->direct_scan_ssid_len = 0;
+	} else
+		priv->status &= ~STATUS_SCAN_PENDING;
+
 	queue_delayed_work(priv->workqueue, &priv->scan_check,
 			   IPW_SCAN_CHECK_WATCHDOG);
 done:
@@ -6402,15 +6437,22 @@ done:
 static void ipw_request_passive_scan(struct work_struct *work)
 {
 	struct ipw_priv *priv =
-		container_of(work, struct ipw_priv, request_passive_scan);
-  	ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE);
+		container_of(work, struct ipw_priv, request_passive_scan.work);
+	ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE, 0);
 }
 
 static void ipw_request_scan(struct work_struct *work)
 {
 	struct ipw_priv *priv =
 		container_of(work, struct ipw_priv, request_scan.work);
-	ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE);
+	ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 0);
+}
+
+static void ipw_request_direct_scan(struct work_struct *work)
+{
+	struct ipw_priv *priv =
+		container_of(work, struct ipw_priv, request_direct_scan.work);
+	ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 1);
 }
 
 static void ipw_bg_abort_scan(struct work_struct *work)
@@ -9477,99 +9519,38 @@ static int ipw_wx_get_retry(struct net_device *dev,
 	return 0;
 }
 
-static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid,
-				   int essid_len)
-{
-	struct ipw_scan_request_ext scan;
-	int err = 0, scan_type;
-
-	if (!(priv->status & STATUS_INIT) ||
-	    (priv->status & STATUS_EXIT_PENDING))
-		return 0;
-
-	mutex_lock(&priv->mutex);
-
-	if (priv->status & STATUS_RF_KILL_MASK) {
-		IPW_DEBUG_HC("Aborting scan due to RF kill activation\n");
-		priv->status |= STATUS_SCAN_PENDING;
-		goto done;
-	}
-
-	IPW_DEBUG_HC("starting request direct scan!\n");
-
-	if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) {
-		/* We should not sleep here; otherwise we will block most
-		 * of the system (for instance, we hold rtnl_lock when we
-		 * get here).
-		 */
-		err = -EAGAIN;
-		goto done;
-	}
-	memset(&scan, 0, sizeof(scan));
-
-	if (priv->config & CFG_SPEED_SCAN)
-		scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
-		    cpu_to_le16(30);
-	else
-		scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
-		    cpu_to_le16(20);
-
-	scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] =
-	    cpu_to_le16(20);
-	scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
-	scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
-
-	scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee));
-
-	err = ipw_send_ssid(priv, essid, essid_len);
-	if (err) {
-		IPW_DEBUG_HC("Attempt to send SSID command failed\n");
-		goto done;
-	}
-	scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
-
-	ipw_add_scan_channels(priv, &scan, scan_type);
-
-	err = ipw_send_scan_request_ext(priv, &scan);
-	if (err) {
-		IPW_DEBUG_HC("Sending scan command failed: %08X\n", err);
-		goto done;
-	}
-
-	priv->status |= STATUS_SCANNING;
-
-      done:
-	mutex_unlock(&priv->mutex);
-	return err;
-}
-
 static int ipw_wx_set_scan(struct net_device *dev,
 			   struct iw_request_info *info,
 			   union iwreq_data *wrqu, char *extra)
 {
 	struct ipw_priv *priv = ieee80211_priv(dev);
 	struct iw_scan_req *req = (struct iw_scan_req *)extra;
+	struct delayed_work *work = NULL;
 
 	mutex_lock(&priv->mutex);
+
 	priv->user_requested_scan = 1;
-	mutex_unlock(&priv->mutex);
 
 	if (wrqu->data.length == sizeof(struct iw_scan_req)) {
 		if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
-			ipw_request_direct_scan(priv, req->essid,
-						req->essid_len);
-			return 0;
-		}
-		if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
-			queue_work(priv->workqueue,
-				   &priv->request_passive_scan);
-			return 0;
+			int len = min((int)req->essid_len,
+			              (int)sizeof(priv->direct_scan_ssid));
+			memcpy(priv->direct_scan_ssid, req->essid, len);
+			priv->direct_scan_ssid_len = len;
+			work = &priv->request_direct_scan;
+		} else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
+			work = &priv->request_passive_scan;
 		}
+	} else {
+		/* Normal active broadcast scan */
+		work = &priv->request_scan;
 	}
 
+	mutex_unlock(&priv->mutex);
+
 	IPW_DEBUG_WX("Start scan\n");
 
-	queue_delayed_work(priv->workqueue, &priv->request_scan, 0);
+	queue_delayed_work(priv->workqueue, work, 0);
 
 	return 0;
 }
@@ -10731,6 +10712,8 @@ static void ipw_link_up(struct ipw_priv *priv)
 	}
 
 	cancel_delayed_work(&priv->request_scan);
+	cancel_delayed_work(&priv->request_direct_scan);
+	cancel_delayed_work(&priv->request_passive_scan);
 	cancel_delayed_work(&priv->scan_event);
 	ipw_reset_stats(priv);
 	/* Ensure the rate is updated immediately */
@@ -10761,6 +10744,8 @@ static void ipw_link_down(struct ipw_priv *priv)
 
 	/* Cancel any queued work ... */
 	cancel_delayed_work(&priv->request_scan);
+	cancel_delayed_work(&priv->request_direct_scan);
+	cancel_delayed_work(&priv->request_passive_scan);
 	cancel_delayed_work(&priv->adhoc_check);
 	cancel_delayed_work(&priv->gather_stats);
 
@@ -10800,8 +10785,9 @@ static int __devinit ipw_setup_deferred_work(struct ipw_priv *priv)
 	INIT_WORK(&priv->up, ipw_bg_up);
 	INIT_WORK(&priv->down, ipw_bg_down);
 	INIT_DELAYED_WORK(&priv->request_scan, ipw_request_scan);
+	INIT_DELAYED_WORK(&priv->request_direct_scan, ipw_request_direct_scan);
+	INIT_DELAYED_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
 	INIT_DELAYED_WORK(&priv->scan_event, ipw_scan_event);
-	INIT_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
 	INIT_DELAYED_WORK(&priv->gather_stats, ipw_bg_gather_stats);
 	INIT_WORK(&priv->abort_scan, ipw_bg_abort_scan);
 	INIT_WORK(&priv->roam, ipw_bg_roam);
@@ -11835,6 +11821,8 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev)
 	cancel_delayed_work(&priv->adhoc_check);
 	cancel_delayed_work(&priv->gather_stats);
 	cancel_delayed_work(&priv->request_scan);
+	cancel_delayed_work(&priv->request_direct_scan);
+	cancel_delayed_work(&priv->request_passive_scan);
 	cancel_delayed_work(&priv->scan_event);
 	cancel_delayed_work(&priv->rf_kill);
 	cancel_delayed_work(&priv->scan_check);
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index cd3295b66dd..d4ab28b73b3 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -1037,6 +1037,7 @@ struct ipw_cmd {	 /* XXX */
 #define STATUS_DISASSOC_PENDING (1<<12)
 #define STATUS_STATE_PENDING    (1<<13)
 
+#define STATUS_DIRECT_SCAN_PENDING (1<<19)
 #define STATUS_SCAN_PENDING     (1<<20)
 #define STATUS_SCANNING         (1<<21)
 #define STATUS_SCAN_ABORTING    (1<<22)
@@ -1292,6 +1293,8 @@ struct ipw_priv {
 	struct iw_public_data wireless_data;
 
 	int user_requested_scan;
+	u8 direct_scan_ssid[IW_ESSID_MAX_SIZE];
+	u8 direct_scan_ssid_len;
 
 	struct workqueue_struct *workqueue;
 
@@ -1301,8 +1304,9 @@ struct ipw_priv {
 	struct work_struct system_config;
 	struct work_struct rx_replenish;
 	struct delayed_work request_scan;
+	struct delayed_work request_direct_scan;
+	struct delayed_work request_passive_scan;
 	struct delayed_work scan_event;
-  	struct work_struct request_passive_scan;
 	struct work_struct adapter_restart;
 	struct delayed_work rf_kill;
 	struct work_struct up;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index d200d08fb08..8b1528e52d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -229,14 +229,15 @@ static int iwl3945_led_register_led(struct iwl3945_priv *priv,
 	led->led_dev.brightness_set = iwl3945_led_brightness_set;
 	led->led_dev.default_trigger = trigger;
 
+	led->priv = priv;
+	led->type = type;
+
 	ret = led_classdev_register(device, &led->led_dev);
 	if (ret) {
 		IWL_ERROR("Error: failed to register led handler.\n");
 		return ret;
 	}
 
-	led->priv = priv;
-	led->type = type;
 	led->registered = 1;
 
 	if (set_led && led->led_on)
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 6328b959387..8124fd9b135 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1842,6 +1842,9 @@ static void lbs_send_confirmsleep(struct lbs_private *priv)
 
 	spin_lock_irqsave(&priv->driver_lock, flags);
 
+	/* We don't get a response on the sleep-confirmation */
+	priv->dnld_sent = DNLD_RES_RECEIVED;
+
 	/* If nothing to do, go back to sleep (?) */
 	if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx])
 		priv->psstate = PS_STATE_SLEEP;
@@ -1904,12 +1907,12 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv)
 
 	lbs_deb_enter(LBS_DEB_HOST);
 
+	spin_lock_irqsave(&priv->driver_lock, flags);
 	if (priv->dnld_sent) {
 		allowed = 0;
 		lbs_deb_host("dnld_sent was set\n");
 	}
 
-	spin_lock_irqsave(&priv->driver_lock, flags);
 	/* In-progress command? */
 	if (priv->cur_cmd) {
 		allowed = 0;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index e1f06606859..acfc4bfcc26 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -732,8 +732,8 @@ static int lbs_thread(void *data)
 		lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
 		       priv->currenttxskb, priv->dnld_sent);
 
-		spin_lock_irq(&priv->driver_lock);
 		/* Process any pending command response */
+		spin_lock_irq(&priv->driver_lock);
 		resp_idx = priv->resp_idx;
 		if (priv->resp_len[resp_idx]) {
 			spin_unlock_irq(&priv->driver_lock);
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index ab1029e7988..2d611876bbe 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -32,12 +32,13 @@ config RT2X00_LIB_FIRMWARE
 config RT2X00_LIB_RFKILL
 	boolean
 	depends on RT2X00_LIB
+	depends on INPUT
 	select RFKILL
 	select INPUT_POLLDEV
 
 config RT2X00_LIB_LEDS
 	boolean
-	depends on RT2X00_LIB
+	depends on RT2X00_LIB && NEW_LEDS
 
 config RT2400PCI
 	tristate "Ralink rt2400 pci/pcmcia support"
@@ -51,7 +52,7 @@ config RT2400PCI
 
 config RT2400PCI_RFKILL
 	bool "RT2400 rfkill support"
-	depends on RT2400PCI
+	depends on RT2400PCI && INPUT
 	select RT2X00_LIB_RFKILL
 	---help---
 	  This adds support for integrated rt2400 devices that feature a
@@ -60,7 +61,7 @@ config RT2400PCI_RFKILL
 
 config RT2400PCI_LEDS
 	bool "RT2400 leds support"
-	depends on RT2400PCI
+	depends on RT2400PCI && NEW_LEDS
 	select LEDS_CLASS
 	select RT2X00_LIB_LEDS
 	---help---
@@ -78,7 +79,7 @@ config RT2500PCI
 
 config RT2500PCI_RFKILL
 	bool "RT2500 rfkill support"
-	depends on RT2500PCI
+	depends on RT2500PCI && INPUT
 	select RT2X00_LIB_RFKILL
 	---help---
 	  This adds support for integrated rt2500 devices that feature a
@@ -87,7 +88,7 @@ config RT2500PCI_RFKILL
 
 config RT2500PCI_LEDS
 	bool "RT2500 leds support"
-	depends on RT2500PCI
+	depends on RT2500PCI && NEW_LEDS
 	select LEDS_CLASS
 	select RT2X00_LIB_LEDS
 	---help---
@@ -107,7 +108,7 @@ config RT61PCI
 
 config RT61PCI_RFKILL
 	bool "RT61 rfkill support"
-	depends on RT61PCI
+	depends on RT61PCI && INPUT
 	select RT2X00_LIB_RFKILL
 	---help---
 	  This adds support for integrated rt61 devices that feature a
@@ -116,7 +117,7 @@ config RT61PCI_RFKILL
 
 config RT61PCI_LEDS
 	bool "RT61 leds support"
-	depends on RT61PCI
+	depends on RT61PCI && NEW_LEDS
 	select LEDS_CLASS
 	select RT2X00_LIB_LEDS
 	---help---
@@ -133,7 +134,7 @@ config RT2500USB
 
 config RT2500USB_LEDS
 	bool "RT2500 leds support"
-	depends on RT2500USB
+	depends on RT2500USB && NEW_LEDS
 	select LEDS_CLASS
 	select RT2X00_LIB_LEDS
 	---help---
@@ -152,7 +153,7 @@ config RT73USB
 
 config RT73USB_LEDS
 	bool "RT73 leds support"
-	depends on RT73USB
+	depends on RT73USB && NEW_LEDS
 	select LEDS_CLASS
 	select RT2X00_LIB_LEDS
 	---help---
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 971af2546b5..60893de3bf8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -412,8 +412,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	if (pci_set_mwi(pci_dev))
 		ERROR_PROBE("MWI not available.\n");
 
-	if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) &&
-	    pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
+	if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
 		ERROR_PROBE("PCI DMA not supported.\n");
 		retval = -EIO;
 		goto exit_disable_device;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 5a331674dcb..e5ceae805b5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -362,6 +362,12 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 		}
 	}
 
+	/*
+	 * Kill guardian urb (if required by driver).
+	 */
+	if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+		return;
+
 	for (i = 0; i < rt2x00dev->bcn->limit; i++) {
 		priv_bcn = rt2x00dev->bcn->entries[i].priv_data;
 		usb_kill_urb(priv_bcn->urb);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index da19a3a91f4..fff8386e816 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2131,6 +2131,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	/* D-Link */
 	{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gemtek */
 	{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6424e5a2c83..418606ac1c3 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -719,7 +719,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 	fc = le16_to_cpu(*((__le16 *) buffer));
 
 	is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
-		 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_QOS_DATA);
+		 (fc & IEEE80211_STYPE_QOS_DATA);
 	is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
 		   (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
 	need_padding = is_qos ^ is_4addr;