pcmcia: use dev_printk and dev_dbg in yenta_socket

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 43 insertions, 35 deletions

diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 129db7bd06c..aaa70227bfb 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -339,8 +339,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 
 	mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
 	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
-	printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
-	       pci_name(socket->dev), mfunc, devctl);
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
 
 	/* make sure PCI interrupts are enabled before probing */
 	ti_init(socket);
@@ -354,8 +354,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 	 * We're here which means PCI interrupts are _not_ delivered. try to
 	 * find the right setting (all serial or parallel)
 	 */
-	printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
-	       pci_name(socket->dev));
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "TI: probing PCI interrupt failed, trying to fix\n");
 
 	/* for serial PCI make sure MFUNC3 is set to IRQSER */
 	if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -379,8 +379,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 
 				pci_irq_status = yenta_probe_cb_irq(socket);
 				if (pci_irq_status == 1) {
-					printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n",
-					       pci_name(socket->dev));
+					dev_printk(KERN_INFO, &socket->dev->dev,
+					    "TI: all-serial interrupts ok\n");
 					mfunc_old = mfunc;
 					goto out;
 				}
@@ -395,8 +395,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 		}
 
 		/* serial PCI interrupts not working fall back to parallel */
-		printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n",
-		       pci_name(socket->dev));
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "TI: falling back to parallel PCI interrupts\n");
 		devctl &= ~TI113X_DCR_IMODE_MASK;
 		devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
 		config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
@@ -427,8 +427,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 	pci_irq_status = yenta_probe_cb_irq(socket);
 	if (pci_irq_status == 1) {
 		mfunc_old = mfunc;
-		printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
-		       pci_name(socket->dev));
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "TI: parallel PCI interrupts ok\n");
 	} else {
 		/* not working, back to old value */
 		mfunc = mfunc_old;
@@ -440,8 +440,9 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 out:
 	if (pci_irq_status < 1) {
 		socket->cb_irq = 0;
-		printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
-		       pci_name(socket->dev));
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "Yenta TI: no PCI interrupts. Fish. "
+			   "Please report.\n");
 	}
 }
 
@@ -513,8 +514,9 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 
 	mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
 	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
-	printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
-	       pci_name(socket->dev), mfunc, devctl);
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "TI: mfunc 0x%08x, devctl 0x%02x\n",
+		   mfunc, devctl);
 
 	/* if IRQs are configured as tied, align irq of func1 with func0 */
 	sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
@@ -533,9 +535,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 	 * We're here which means PCI interrupts are _not_ delivered. try to
 	 * find the right setting
 	 */
-	printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
-	       pci_name(socket->dev));
-
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "TI: probing PCI interrupt failed, trying to fix\n");
 
 	/* if all serial: set INTRTIE, probe again */
 	if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -544,8 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 		if (ti12xx_tie_interrupts(socket, &old_irq)) {
 			pci_irq_status = yenta_probe_cb_irq(socket);
 			if (pci_irq_status == 1) {
-				printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n",
-				       pci_name(socket->dev));
+				dev_printk(KERN_INFO, &socket->dev->dev,
+					"TI: all-serial interrupts, tied ok\n");
 				goto out;
 			}
 
@@ -582,8 +583,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 
 			pci_irq_status = yenta_probe_cb_irq(socket);
 			if (pci_irq_status == 1) {
-				printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
-				       pci_name(socket->dev));
+				dev_printk(KERN_INFO, &socket->dev->dev,
+					   "TI: parallel PCI interrupts ok\n");
 				goto out;
 			}
 
@@ -593,13 +594,13 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 			if (pci_irq_status == -1)
 				goto out;
 		}
-		
+
 		/* still nothing: set INTRTIE */
 		if (ti12xx_tie_interrupts(socket, &old_irq)) {
 			pci_irq_status = yenta_probe_cb_irq(socket);
 			if (pci_irq_status == 1) {
-				printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n",
-				       pci_name(socket->dev));
+				dev_printk(KERN_INFO, &socket->dev->dev,
+				    "TI: parallel PCI interrupts, tied ok\n");
 				goto out;
 			}
 
@@ -610,8 +611,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 out:
 	if (pci_irq_status < 1) {
 		socket->cb_irq = 0;
-		printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
-		       pci_name(socket->dev));
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "TI: no PCI interrupts. Fish. Please report.\n");
 	}
 }
 
@@ -815,11 +816,13 @@ static int ti12xx_override(struct yenta_socket *socket)
 	/* make sure that memory burst is active */
 	val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
 	if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
-		printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n");
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "Disabling CLKRUN feature\n");
 		val |= TI113X_SCR_KEEPCLK;
 	}
 	if (!(val & TI122X_SCR_MRBURSTUP)) {
-		printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n");
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "Enabling burst memory read transactions\n");
 		val |= TI122X_SCR_MRBURSTUP;
 	}
 	if (val_orig != val)
@@ -830,10 +833,12 @@ static int ti12xx_override(struct yenta_socket *socket)
 	 * CSC interrupts to PCI rather than INTVAL.
 	 */
 	val = config_readb(socket, TI1250_DIAGNOSTIC);
-	printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n",
-		(val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
-	printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n",
-		(val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "Using %s to route CSC interrupts to PCI\n",
+		   (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "Routing CardBus interrupts to %s\n",
+		   (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
 
 	/* do irqrouting, depending on function */
 	if (PCI_FUNC(socket->dev->devfn) == 0)
@@ -858,8 +863,9 @@ static int ti1250_override(struct yenta_socket *socket)
 		diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
 
 	if (diag != old) {
-		printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n",
-			old, diag);
+		dev_printk(KERN_INFO, &socket->dev->dev,
+			   "adjusting diagnostic: %02x -> %02x\n",
+			   old, diag);
 		config_writeb(socket, TI1250_DIAGNOSTIC, diag);
 	}
 
@@ -924,7 +930,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
 		/* default to clear TLTEnable bit, old behaviour */
 		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
 
-	printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+	dev_printk(KERN_INFO, &socket->dev->dev,
+		   "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+		   old_c9, test_c9);
 	config_writeb(socket, ENE_TEST_C9, test_c9);
 }