thinkpad-acpi: support the second fan on the X61

Support reading the tachometer of the auxiliary fan of a X60/X61.

It was found out by sheer luck, that bit 0 of EC register 0x31
(formely HBRV) selects which fan is active for tachometer readings
through EC 0x84/0x085: 0 for fan1, 1 for fan2.

Many thanks to Christoph Kl??nter, to Whoopie, and to weasel, who
helped confirm that behaviour.

Fan control through EC HFSP applies to both fans equally, regardless
of the state of bit 0 of EC 0x31.  That matches the way the DSDT uses
HFSP.

In order to better support the secondary fan, export a second
tachometer over hwmon, and add defensive measures to make sure we are
reading the correct tachometer.

Support for the second fan is whitelist-based, as I have not found
anything obvious to look for in the DSDT to detect the presence of
the second fan.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 121 insertions, 1 deletions

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index c8d74dbacbb..27ca676a709 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -264,6 +264,7 @@ static struct {
 	u32 wan:1;
 	u32 uwb:1;
 	u32 fan_ctrl_status_undef:1;
+	u32 second_fan:1;
 	u32 beep_needs_two_args:1;
 	u32 input_device_registered:1;
 	u32 platform_drv_registered:1;
@@ -6298,6 +6299,21 @@ static struct ibm_struct volume_driver_data = {
  *	For firmware bugs, refer to:
  *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
  *
+ *	----
+ *
+ *	ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ *	When bit 0 of EC register 0x31 is zero, the tachometer registers
+ *	show the speed of the main fan.  When bit 0 of EC register 0x31
+ *	is one, the tachometer registers show the speed of the auxiliary
+ *	fan.
+ *
+ *	Fan control seems to affect both fans, regardless of the state
+ *	of this bit.
+ *
+ *	So far, only the firmware for the X60/X61 non-tablet versions
+ *	seem to support this (firmware TP-7M).
+ *
  * TPACPI_FAN_WR_ACPI_FANS:
  *	ThinkPad X31, X40, X41.  Not available in the X60.
  *
@@ -6324,6 +6340,8 @@ enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
 	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
 					 * 0x84 must be read before 0x85 */
+	fan_select_offset = 0x31,	/* EC register 0x31 (Firmware 7M)
+					   bit 0 selects which fan is active */
 
 	TP_EC_FAN_FULLSPEED = 0x40,	/* EC fan mode: full speed */
 	TP_EC_FAN_AUTO	    = 0x80,	/* EC fan mode: auto fan control */
@@ -6417,6 +6435,38 @@ static void fan_quirk1_handle(u8 *fan_status)
 	}
 }
 
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+	if (tp_features.second_fan) {
+		u8 val;
+
+		if (ec_read(fan_select_offset, &val) < 0)
+			return false;
+		val &= 0xFEU;
+		if (ec_write(fan_select_offset, val) < 0)
+			return false;
+	}
+	return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+	u8 val;
+
+	if (!tp_features.second_fan)
+		return false;
+
+	if (ec_read(fan_select_offset, &val) < 0)
+		return false;
+	val |= 0x01U;
+	if (ec_write(fan_select_offset, val) < 0)
+		return false;
+
+	return true;
+}
+
 /*
  * Call with fan_mutex held
  */
@@ -6494,6 +6544,8 @@ static int fan_get_speed(unsigned int *speed)
 	switch (fan_status_access_mode) {
 	case TPACPI_FAN_RD_TPEC:
 		/* all except 570, 600e/x, 770e, 770x */
+		if (unlikely(!fan_select_fan1()))
+			return -EIO;
 		if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
 			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
 			return -EIO;
@@ -6510,6 +6562,34 @@ static int fan_get_speed(unsigned int *speed)
 	return 0;
 }
 
+static int fan2_get_speed(unsigned int *speed)
+{
+	u8 hi, lo;
+	bool rc;
+
+	switch (fan_status_access_mode) {
+	case TPACPI_FAN_RD_TPEC:
+		/* all except 570, 600e/x, 770e, 770x */
+		if (unlikely(!fan_select_fan2()))
+			return -EIO;
+		rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+			     !acpi_ec_read(fan_rpm_offset + 1, &hi);
+		fan_select_fan1(); /* play it safe */
+		if (rc)
+			return -EIO;
+
+		if (likely(speed))
+			*speed = (hi << 8) | lo;
+
+		break;
+
+	default:
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
 static int fan_set_level(int level)
 {
 	if (!fan_control_allowed)
@@ -6915,6 +6995,25 @@ static struct device_attribute dev_attr_fan_fan1_input =
 	__ATTR(fan1_input, S_IRUGO,
 		fan_fan1_input_show, NULL);
 
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int res;
+	unsigned int speed;
+
+	res = fan2_get_speed(&speed);
+	if (res < 0)
+		return res;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+	__ATTR(fan2_input, S_IRUGO,
+		fan_fan2_input_show, NULL);
+
 /* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
 static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
 				     char *buf)
@@ -6948,6 +7047,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
 static struct attribute *fan_attributes[] = {
 	&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
 	&dev_attr_fan_fan1_input.attr,
+	NULL, /* for fan2_input */
 	NULL
 };
 
@@ -6955,7 +7055,8 @@ static const struct attribute_group fan_attr_group = {
 	.attrs = fan_attributes,
 };
 
-#define	TPACPI_FAN_Q1	0x0001
+#define	TPACPI_FAN_Q1	0x0001		/* Unitialized HFSP */
+#define TPACPI_FAN_2FAN	0x0002		/* EC 0x31 bit 0 selects fan2 */
 
 #define TPACPI_FAN_QI(__id1, __id2, __quirks)	\
 	{ .vendor = PCI_VENDOR_ID_IBM,		\
@@ -6963,13 +7064,21 @@ static const struct attribute_group fan_attr_group = {
 	  .ec = TPID(__id1, __id2),		\
 	  .quirks = __quirks }
 
+#define TPACPI_FAN_QL(__id1, __id2, __quirks)	\
+	{ .vendor = PCI_VENDOR_ID_LENOVO,	\
+	  .bios = TPACPI_MATCH_ANY,		\
+	  .ec = TPID(__id1, __id2),		\
+	  .quirks = __quirks }
+
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
 	TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
 	TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
 	TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+	TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
 };
 
+#undef TPACPI_FAN_QL
 #undef TPACPI_FAN_QI
 
 static int __init fan_init(struct ibm_init_struct *iibm)
@@ -6986,6 +7095,7 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 	fan_control_commands = 0;
 	fan_watchdog_maxinterval = 0;
 	tp_features.fan_ctrl_status_undef = 0;
+	tp_features.second_fan = 0;
 	fan_control_desired_level = 7;
 
 	TPACPI_ACPIHANDLE_INIT(fans);
@@ -7006,6 +7116,11 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
+			if (quirks & TPACPI_FAN_2FAN) {
+				tp_features.second_fan = 1;
+				dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+					"secondary fan support enabled\n");
+			}
 		} else {
 			printk(TPACPI_ERR
 			       "ThinkPad ACPI EC access misbehaving, "
@@ -7061,6 +7176,11 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 
 	if (fan_status_access_mode != TPACPI_FAN_NONE ||
 	    fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+		if (tp_features.second_fan) {
+			/* attach second fan tachometer */
+			fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+					&dev_attr_fan_fan2_input.attr;
+		}
 		rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
 					 &fan_attr_group);
 		if (rc < 0)