Merge branch 'master' into upstream-fixes

42 files changed, 573 insertions, 500 deletions

diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index c690c2b89e4..acf292736b4 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -3451,12 +3451,12 @@ create_cmd (Scsi_Cmnd *cmd) {
     for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4, 
 	cmd_dataout += 4, ++i) {
 	u32 vbuf = cmd->use_sg
-	    ? (u32)page_address(((struct scatterlist *)cmd->buffer)[i].page)+
-	      ((struct scatterlist *)cmd->buffer)[i].offset
+	    ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+
+	      ((struct scatterlist *)cmd->request_buffer)[i].offset
 	    : (u32)(cmd->request_buffer);
 	u32 bbuf = virt_to_bus((void *)vbuf);
 	u32 count = cmd->use_sg ?
-	    ((struct scatterlist *)cmd->buffer)[i].length :
+	    ((struct scatterlist *)cmd->request_buffer)[i].length :
 	    cmd->request_bufflen;
 
 	/*
@@ -5417,7 +5417,7 @@ insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) {
 
 	    if ((buffers = cmd->use_sg)) {
     	    	for (offset = 0, 
-		     	segment = (struct scatterlist *) cmd->buffer;
+		     	segment = (struct scatterlist *) cmd->request_buffer;
     	    	     buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) && 
     	    	    	    (ptr < ((char *)page_address(segment->page)+segment->offset+segment->length)))));
     	    	     --buffers, offset += segment->length, ++segment)
diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c
index 8a4659e9410..085db4826e0 100644
--- a/drivers/scsi/NCR53C9x.c
+++ b/drivers/scsi/NCR53C9x.c
@@ -911,7 +911,7 @@ static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp)
 			sp->SCp.ptr =
 				(char *) virt_to_phys(sp->request_buffer);
 	} else {
-		sp->SCp.buffer = (struct scatterlist *) sp->buffer;
+		sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
 		sp->SCp.buffers_residual = sp->use_sg - 1;
 		sp->SCp.this_residual = sp->SCp.buffer->length;
 		if (esp->dma_mmu_get_scsi_sgl)
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index a06f547e87f..d05681f9d81 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -114,7 +114,7 @@ MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
 MODULE_LICENSE("GPL");
 module_param(NCR_D700, charp, 0);
 
-static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
+static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
 	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
 
 #ifdef MODULE
@@ -173,7 +173,7 @@ struct NCR_D700_private {
 	char			pad;
 };
 
-static int 
+static int __devinit
 NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
 		   int slot, u32 region, int differential)
 {
@@ -243,7 +243,7 @@ NCR_D700_intr(int irq, void *data, struct pt_regs *regs)
  * essentially connectecd to the MCA bus independently, it is easier
  * to set them up as two separate host adapters, rather than one
  * adapter with two channels */
-static int
+static int __devinit
 NCR_D700_probe(struct device *dev)
 {
 	struct NCR_D700_private *p;
@@ -329,7 +329,7 @@ NCR_D700_probe(struct device *dev)
 	for (i = 0; i < 2; i++) {
 		int err;
 
-		if ((err = NCR_D700_probe_one(p, i, slot, irq,
+		if ((err = NCR_D700_probe_one(p, i, irq, slot,
 					      offset_addr + (0x80 * i),
 					      differential)) != 0)
 			printk("D700: SIOP%d: probe failed, error = %d\n",
@@ -349,7 +349,7 @@ NCR_D700_probe(struct device *dev)
 	return 0;
 }
 
-static void
+static void __devexit
 NCR_D700_remove_one(struct Scsi_Host *host)
 {
 	scsi_remove_host(host);
@@ -359,7 +359,7 @@ NCR_D700_remove_one(struct Scsi_Host *host)
 	release_region(host->base, 64);
 }
 
-static int
+static int __devexit
 NCR_D700_remove(struct device *dev)
 {
 	struct NCR_D700_private *p = dev_get_drvdata(dev);
@@ -380,7 +380,7 @@ static struct mca_driver NCR_D700_driver = {
 		.name		= "NCR_D700",
 		.bus		= &mca_bus_type,
 		.probe		= NCR_D700_probe,
-		.remove		= NCR_D700_remove,
+		.remove		= __devexit_p(NCR_D700_remove),
 	},
 };
 
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 36e63f82d9f..f974869ea32 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -551,6 +551,11 @@ struct aha152x_hostdata {
 struct aha152x_scdata {
 	Scsi_Cmnd *next;	/* next sc in queue */
 	struct semaphore *sem;	/* semaphore to block on */
+	unsigned char cmd_len;
+	unsigned char cmnd[MAX_COMMAND_SIZE];
+	unsigned short use_sg;
+	unsigned request_bufflen;
+	void *request_buffer;
 };
 
 
@@ -1006,11 +1011,20 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p
 			return FAILED;
 		}
 	} else {
+		struct aha152x_scdata *sc;
+
 		SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
 		if(SCpnt->host_scribble==0) {
 			printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt));
 			return FAILED;
 		}
+
+		sc = SCDATA(SCpnt);
+		memcpy(sc->cmnd, SCpnt->cmnd, sizeof(sc->cmnd));
+		sc->request_buffer  = SCpnt->request_buffer;
+		sc->request_bufflen = SCpnt->request_bufflen;
+		sc->use_sg          = SCpnt->use_sg;
+		sc->cmd_len         = SCpnt->cmd_len;
 	}
 
 	SCNEXT(SCpnt)		= NULL;
@@ -1165,6 +1179,10 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
 	DECLARE_MUTEX_LOCKED(sem);
 	struct timer_list timer;
 	int ret, issued, disconnected;
+	unsigned char old_cmd_len = SCpnt->cmd_len;
+	unsigned short old_use_sg = SCpnt->use_sg;
+	void *old_buffer = SCpnt->request_buffer;
+	unsigned old_bufflen = SCpnt->request_bufflen;
 	unsigned long flags;
 
 #if defined(AHA152X_DEBUG)
@@ -1198,11 +1216,11 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
 	add_timer(&timer);
 	down(&sem);
 	del_timer(&timer);
-	
-	SCpnt->cmd_len         = SCpnt->old_cmd_len;
-	SCpnt->use_sg          = SCpnt->old_use_sg;
-  	SCpnt->request_buffer  = SCpnt->buffer;
-       	SCpnt->request_bufflen = SCpnt->bufflen;
+
+	SCpnt->cmd_len         = old_cmd_len;
+	SCpnt->use_sg          = old_use_sg;
+  	SCpnt->request_buffer  = old_buffer;
+       	SCpnt->request_bufflen = old_bufflen;
 
 	DO_LOCK(flags);
 
@@ -1565,6 +1583,9 @@ static void busfree_run(struct Scsi_Host *shpnt)
 #endif
 
 		if(DONE_SC->SCp.phase & check_condition) {
+			struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC;
+			struct aha152x_scdata *sc = SCDATA(cmd);
+
 #if 0
 			if(HOSTDATA(shpnt)->debug & debug_eh) {
 				printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
@@ -1573,13 +1594,13 @@ static void busfree_run(struct Scsi_Host *shpnt)
 #endif
 
 			/* restore old command */
-			memcpy((void *) DONE_SC->cmnd, (void *) DONE_SC->data_cmnd, sizeof(DONE_SC->data_cmnd));
-			DONE_SC->request_buffer  = DONE_SC->buffer;
-			DONE_SC->request_bufflen = DONE_SC->bufflen;
-			DONE_SC->use_sg          = DONE_SC->old_use_sg;
-			DONE_SC->cmd_len         = DONE_SC->old_cmd_len;
+			memcpy(cmd->cmnd, sc->cmnd, sizeof(sc->cmnd));
+			cmd->request_buffer  = sc->request_buffer;
+			cmd->request_bufflen = sc->request_bufflen;
+			cmd->use_sg          = sc->use_sg;
+			cmd->cmd_len         = sc->cmd_len;
 
-			DONE_SC->SCp.Status = 0x02;
+			cmd->SCp.Status = 0x02;
 
 			HOSTDATA(shpnt)->commands--;
 			if (!HOSTDATA(shpnt)->commands)
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index a1e8ca75859..653818d2f80 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -7289,7 +7289,7 @@ ahd_reset_cmds_pending(struct ahd_softc *ahd)
 	ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
 }
 
-void
+static void
 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
 {
 	cam_status ostat;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index b244c712417..998999c0a97 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -243,25 +243,6 @@ ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
 static uint32_t aic79xx_no_reset;
 
 /*
- * Certain PCI motherboards will scan PCI devices from highest to lowest,
- * others scan from lowest to highest, and they tend to do all kinds of
- * strange things when they come into contact with PCI bridge chips.  The
- * net result of all this is that the PCI card that is actually used to boot
- * the machine is very hard to detect.  Most motherboards go from lowest
- * PCI slot number to highest, and the first SCSI controller found is the
- * one you boot from.  The only exceptions to this are when a controller
- * has its BIOS disabled.  So, we by default sort all of our SCSI controllers
- * from lowest PCI slot number to highest PCI slot number.  We also force
- * all controllers with their BIOS disabled to the end of the list.  This
- * works on *almost* all computers.  Where it doesn't work, we have this
- * option.  Setting this option to non-0 will reverse the order of the sort
- * to highest first, then lowest, but will still leave cards with their BIOS
- * disabled at the very end.  That should fix everyone up unless there are
- * really strange cirumstances.
- */
-static uint32_t aic79xx_reverse_scan;
-
-/*
  * Should we force EXTENDED translation on a controller.
  *     0 == Use whatever is in the SEEPROM or default to off
  *     1 == Use whatever is in the SEEPROM or default to on
@@ -350,7 +331,6 @@ MODULE_PARM_DESC(aic79xx,
 "				periodically to prevent tag starvation.\n"
 "				This may be required by some older disk\n"
 "				or drives/RAID arrays.\n"
-"	reverse_scan		Sort PCI devices highest Bus/Slot to lowest\n"
 "	tag_info:<tag_str>	Set per-target tag depth\n"
 "	global_tag_depth:<int>	Global tag depth for all targets on all buses\n"
 "	slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
@@ -1031,7 +1011,6 @@ aic79xx_setup(char *s)
 #ifdef AHD_DEBUG
 		{ "debug", &ahd_debug },
 #endif
-		{ "reverse_scan", &aic79xx_reverse_scan },
 		{ "periodic_otag", &aic79xx_periodic_otag },
 		{ "pci_parity", &aic79xx_pci_parity },
 		{ "seltime", &aic79xx_seltime },
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index debf3e2a079..aa4be8a3141 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -353,7 +353,6 @@ MODULE_PARM_DESC(aic7xxx,
 "				periodically to prevent tag starvation.\n"
 "				This may be required by some older disk\n"
 "				drives or RAID arrays.\n"
-"	reverse_scan		Sort PCI devices highest Bus/Slot to lowest\n"
 "	tag_info:<tag_str>	Set per-target tag depth\n"
 "	global_tag_depth:<int>	Global tag depth for every target\n"
 "				on every bus\n"
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 007a14e5c3f..e397129c90d 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -507,7 +507,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd)
      */
 
     if (cmd->use_sg) {
-	cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+	cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
 	cmd->SCp.buffers_residual = cmd->use_sg - 1;
 	cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+
 		       cmd->SCp.buffer->offset;
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index dddd2acce76..61f6024b61b 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -5,6 +5,7 @@
  * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
  *   by D. Gilbert and aeb (20020609)
  * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
+ * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702
  */
 
 #include <linux/blkdev.h>
@@ -36,55 +37,56 @@ static const char * cdb_byte0_names[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
 	    "Reasssign Blocks",
-/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL,
+/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
-/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)",
-	    "Reserve (6)",
-/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", 
+/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
+	    "Reserve(6)",
+/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
 /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", 
 /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
 /* 20-22 */  NULL, NULL, NULL,
 /* 23-28 */ "Read Format Capacities", "Set Window",
-	    "Read Capacity (10)", NULL, NULL, "Read (10)", 
-/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", 
-            "Read updated block", 
-/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", 
+	    "Read Capacity(10)", NULL, NULL, "Read(10)",
+/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
+            "Read updated block",
+/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
 /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", 
-/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)",
+/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
 	    "Read Defect Data(10)", 
 /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", 
             "Read Buffer", 
-/* 3d-3f */ "Update Block", "Read Long (10)",  "Write Long (10)",
-/* 40-41 */ "Change Definition", "Write Same (10)",
+/* 3d-3f */ "Update Block", "Read Long(10)",  "Write Long(10)",
+/* 40-41 */ "Change Definition", "Write Same(10)",
 /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
-            "Play audio (10)", "Get configuration", "Play audio msf",
+            "Play audio(10)", "Get configuration", "Play audio msf",
             "Play audio track/index",
-/* 49-4f */ "Play track relative (10)", "Get event status notification",
+/* 49-4f */ "Play track relative(10)", "Get event status notification",
             "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
             NULL,
 /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
-            "Reserve track", "Send OPC info", "Mode Select (10)",
-/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue",
-            "Mode Sense (10)", "Close track/session",
+            "Reserve track", "Send OPC info", "Mode Select(10)",
+/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
+            "Mode Sense(10)", "Close track/session",
 /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
             "Persistent reserve out",
 /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
-/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
             "Receive copy results",
-/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out",
-            "Read (16)", "Memory Export Out (16)",
-/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes",
-            "Write and verify (16)", "Verify (16)",
-/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)",
-            "Lock/unlock cache (16)", "Write same (16)", NULL,
+/* 85-89 */ "ATA command pass through(16)", "Access control in",
+	    "Access control out", "Read(16)", "Memory Export Out(16)",
+/* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes",
+            "Write and verify(16)", "Verify(16)",
+/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
+            "Lock/unlock cache(16)", "Write same(16)", NULL,
 /* 95-99 */ NULL, NULL, NULL, NULL, NULL,
-/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)",
-            "Service action out (16)",
-/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in",
-            "Maintenance out", "Move medium/play audio(12)",
+/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
+            "Service action out(16)",
+/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
+            "Security protocol in", "Maintenance in", "Maintenance out",
+	    "Move medium/play audio(12)",
 /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
             "Play track relative(12)",
 /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
@@ -92,12 +94,12 @@ static const char * cdb_byte0_names[] = {
 /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
 /* b2-b4 */ "Search data low(12)", "Set limits(12)",
             "Read element status attached",
-/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming",
+/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
 /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
 /* ba-bc */ "Redundancy group (in), Scan",
-            "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd",
-/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd",
-            "Volume set out, Send DVD structure",
+            "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
+/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
+            "Volume set (out), Send DVD structure",
 };
 
 struct value_name_pair {
@@ -112,6 +114,7 @@ static const struct value_name_pair maint_in_arr[] = {
 	{0xc, "Report supported operation codes"},
 	{0xd, "Report supported task management functions"},
 	{0xe, "Report priority"},
+	{0xf, "Report timestamp"},
 };
 #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
 
@@ -120,6 +123,7 @@ static const struct value_name_pair maint_out_arr[] = {
 	{0xa, "Set target port groups"},
 	{0xb, "Change aliases"},
 	{0xe, "Set priority"},
+	{0xe, "Set timestamp"},
 };
 #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
 
@@ -427,6 +431,7 @@ static struct error_info additional[] =
 	{0x001A, "Rewind operation in progress"},
 	{0x001B, "Set capacity operation in progress"},
 	{0x001C, "Verify operation in progress"},
+	{0x001D, "ATA pass through information available"},
 
 	{0x0100, "No index/sector signal"},
 
@@ -438,7 +443,7 @@ static struct error_info additional[] =
 
 	{0x0400, "Logical unit not ready, cause not reportable"},
 	{0x0401, "Logical unit is in process of becoming ready"},
-	{0x0402, "Logical unit not ready, initializing cmd. required"},
+	{0x0402, "Logical unit not ready, initializing command required"},
 	{0x0403, "Logical unit not ready, manual intervention required"},
 	{0x0404, "Logical unit not ready, format in progress"},
 	{0x0405, "Logical unit not ready, rebuild in progress"},
@@ -478,6 +483,9 @@ static struct error_info additional[] =
 	{0x0B00, "Warning"},
 	{0x0B01, "Warning - specified temperature exceeded"},
 	{0x0B02, "Warning - enclosure degraded"},
+	{0x0B03, "Warning - background self-test failed"},
+	{0x0B04, "Warning - background pre-scan detected medium error"},
+	{0x0B05, "Warning - background medium scan detected medium error"},
 
 	{0x0C00, "Write error"},
 	{0x0C01, "Write error - recovered with auto reallocation"},
@@ -493,6 +501,7 @@ static struct error_info additional[] =
 	{0x0C0B, "Auxiliary memory write error"},
 	{0x0C0C, "Write error - unexpected unsolicited data"},
 	{0x0C0D, "Write error - not enough unsolicited data"},
+	{0x0C0F, "Defects in error window"},
 
 	{0x0D00, "Error detected by third party temporary initiator"},
 	{0x0D01, "Third party device failure"},
@@ -504,11 +513,12 @@ static struct error_info additional[] =
 	{0x0E00, "Invalid information unit"},
 	{0x0E01, "Information unit too short"},
 	{0x0E02, "Information unit too long"},
+	{0x0E03, "Invalid field in command information unit"},
 
 	{0x1000, "Id CRC or ECC error"},
-	{0x1001, "Data block guard check failed"},
-	{0x1002, "Data block application tag check failed"},
-	{0x1003, "Data block reference tag check failed"},
+	{0x1001, "Logical block guard check failed"},
+	{0x1002, "Logical block application tag check failed"},
+	{0x1003, "Logical block reference tag check failed"},
 
 	{0x1100, "Unrecovered read error"},
 	{0x1101, "Read retries exhausted"},
@@ -530,6 +540,7 @@ static struct error_info additional[] =
 	{0x1111, "Read error - loss of streaming"},
 	{0x1112, "Auxiliary memory read error"},
 	{0x1113, "Read error - failed retransmission request"},
+	{0x1114, "Read error - lba marked bad by application client"},
 
 	{0x1200, "Address mark not found for id field"},
 
@@ -610,11 +621,14 @@ static struct error_info additional[] =
 	{0x2100, "Logical block address out of range"},
 	{0x2101, "Invalid element address"},
 	{0x2102, "Invalid address for write"},
+	{0x2103, "Invalid write crossing layer jump"},
 
 	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
 
 	{0x2400, "Invalid field in cdb"},
 	{0x2401, "CDB decryption error"},
+	{0x2402, "Obsolete"},
+	{0x2403, "Obsolete"},
 	{0x2404, "Security audit value frozen"},
 	{0x2405, "Security working key frozen"},
 	{0x2406, "Nonce not unique"},
@@ -637,7 +651,10 @@ static struct error_info additional[] =
 	{0x260C, "Invalid operation for copy source or destination"},
 	{0x260D, "Copy segment granularity violation"},
 	{0x260E, "Invalid parameter while port is enabled"},
-	{0x260F, "Invalid data-out buffer integrity"},
+	{0x260F, "Invalid data-out buffer integrity check value"},
+	{0x2610, "Data decryption key fail limit reached"},
+	{0x2611, "Incomplete key-associated data set"},
+	{0x2612, "Vendor specific key reference not found"},
 
 	{0x2700, "Write protected"},
 	{0x2701, "Hardware write protected"},
@@ -649,6 +666,7 @@ static struct error_info additional[] =
 
 	{0x2800, "Not ready to ready change, medium may have changed"},
 	{0x2801, "Import or export element accessed"},
+	{0x2802, "Format-layer may have changed"},
 
 	{0x2900, "Power on, reset, or bus device reset occurred"},
 	{0x2901, "Power on occurred"},
@@ -669,6 +687,11 @@ static struct error_info additional[] =
 	{0x2A07, "Implicit asymmetric access state transition failed"},
 	{0x2A08, "Priority changed"},
 	{0x2A09, "Capacity data has changed"},
+	{0x2A10, "Timestamp changed"},
+	{0x2A11, "Data encryption parameters changed by another i_t nexus"},
+	{0x2A12, "Data encryption parameters changed by vendor specific "
+		 "event"},
+	{0x2A13, "Data encryption key instance counter has changed"},
 
 	{0x2B00, "Copy cannot execute since host cannot disconnect"},
 
@@ -690,6 +713,7 @@ static struct error_info additional[] =
 	{0x2E00, "Insufficient time for operation"},
 
 	{0x2F00, "Commands cleared by another initiator"},
+	{0x2F01, "Commands cleared by power loss notification"},
 
 	{0x3000, "Incompatible medium installed"},
 	{0x3001, "Cannot read medium - unknown format"},
@@ -702,7 +726,8 @@ static struct error_info additional[] =
 	{0x3008, "Cannot write - application code mismatch"},
 	{0x3009, "Current session not fixated for append"},
 	{0x300A, "Cleaning request rejected"},
-	{0x300C, "WORM medium, overwrite attempted"},
+	{0x300C, "WORM medium - overwrite attempted"},
+	{0x300D, "WORM medium - integrity check"},
 	{0x3010, "Medium not formatted"},
 
 	{0x3100, "Medium format corrupted"},
@@ -790,6 +815,9 @@ static struct error_info additional[] =
 	{0x3F0F, "Echo buffer overwritten"},
 	{0x3F10, "Medium loadable"},
 	{0x3F11, "Medium auxiliary memory accessible"},
+	{0x3F12, "iSCSI IP address added"},
+	{0x3F13, "iSCSI IP address removed"},
+	{0x3F14, "iSCSI IP address changed"},
 /*
  *	{0x40NN, "Ram failure"},
  *	{0x40NN, "Diagnostic failure on component nn"},
@@ -799,6 +827,7 @@ static struct error_info additional[] =
 	{0x4300, "Message error"},
 
 	{0x4400, "Internal target failure"},
+	{0x4471, "ATA device failed set features"},
 
 	{0x4500, "Select or reselect failure"},
 
@@ -807,9 +836,10 @@ static struct error_info additional[] =
 	{0x4700, "Scsi parity error"},
 	{0x4701, "Data phase CRC error detected"},
 	{0x4702, "Scsi parity error detected during st data phase"},
-	{0x4703, "Information unit CRC error detected"},
+	{0x4703, "Information unit iuCRC error detected"},
 	{0x4704, "Asynchronous information protection error detected"},
 	{0x4705, "Protocol service CRC error"},
+	{0x4706, "Phy test function in progress"},
 	{0x477f, "Some commands cleared by iSCSI Protocol event"},
 
 	{0x4800, "Initiator detected error message received"},
@@ -844,6 +874,8 @@ static struct error_info additional[] =
 	{0x5300, "Media load or eject failed"},
 	{0x5301, "Unload tape failure"},
 	{0x5302, "Medium removal prevented"},
+	{0x5303, "Medium removal prevented by data transfer element"},
+	{0x5304, "Medium thread or unthread failure"},
 
 	{0x5400, "Scsi to host system interface failure"},
 
@@ -855,6 +887,7 @@ static struct error_info additional[] =
 	{0x5505, "Insufficient access control resources"},
 	{0x5506, "Auxiliary memory out of space"},
 	{0x5507, "Quota error"},
+	{0x5508, "Maximum number of supplemental decryption keys exceeded"},
 
 	{0x5700, "Unable to recover table-of-contents"},
 
@@ -1004,6 +1037,7 @@ static struct error_info additional[] =
 	{0x6708, "Assign failure occurred"},
 	{0x6709, "Multiply assigned logical unit"},
 	{0x670A, "Set target port groups command failed"},
+	{0x670B, "ATA device feature not enabled"},
 
 	{0x6800, "Logical unit not configured"},
 
@@ -1030,6 +1064,8 @@ static struct error_info additional[] =
 	{0x6F03, "Read of scrambled sector without authentication"},
 	{0x6F04, "Media region code is mismatched to logical unit region"},
 	{0x6F05, "Drive region must be permanent/region reset count error"},
+	{0x6F06, "Insufficient block count for binding nonce recording"},
+	{0x6F07, "Conflict in binding nonce recording"},
 /*
  *	{0x70NN, "Decompression exception short algorithm id of nn"},
  */
@@ -1041,6 +1077,8 @@ static struct error_info additional[] =
 	{0x7203, "Session fixation error - incomplete track in session"},
 	{0x7204, "Empty or partially written reserved track"},
 	{0x7205, "No more track reservations allowed"},
+	{0x7206, "RMZ extension is not allowed"},
+	{0x7207, "No more test zone extensions are allowed"},
 
 	{0x7300, "Cd control error"},
 	{0x7301, "Power calibration area almost full"},
@@ -1049,6 +1087,18 @@ static struct error_info additional[] =
 	{0x7304, "Program memory area update failure"},
 	{0x7305, "Program memory area is full"},
 	{0x7306, "RMA/PMA is almost full"},
+	{0x7310, "Current power calibration area almost full"},
+	{0x7311, "Current power calibration area is full"},
+	{0x7317, "RDZ is full"},
+
+	{0x7400, "Security error"},
+	{0x7401, "Unable to decrypt data"},
+	{0x7402, "Unencrypted data encountered while decrypting"},
+	{0x7403, "Incorrect data encryption key"},
+	{0x7404, "Cryptographic integrity validation failed"},
+	{0x7405, "Error decrypting data"},
+	{0x7471, "Logical unit access not authorized"},
+
 	{0, NULL}
 };
 
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
index 10573c24a50..eaf64c7e54e 100644
--- a/drivers/scsi/esp.c
+++ b/drivers/scsi/esp.c
@@ -1397,7 +1397,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
 			sp->SCp.ptr = NULL;
 		}
 	} else {
-		sp->SCp.buffer = (struct scatterlist *) sp->buffer;
+		sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
 		sp->SCp.buffers_residual = sbus_map_sg(esp->sdev,
 						       sp->SCp.buffer,
 						       sp->use_sg,
@@ -1410,7 +1410,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
 static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
 {
 	if (sp->use_sg) {
-		sbus_unmap_sg(esp->sdev, sp->buffer, sp->use_sg,
+		sbus_unmap_sg(esp->sdev, sp->request_buffer, sp->use_sg,
 			      sp->sc_data_direction);
 	} else if (sp->request_bufflen) {
 		sbus_unmap_single(esp->sdev,
diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c
index 7eed0b09817..6aeb5f003c3 100644
--- a/drivers/scsi/ibmvscsi/iseries_vscsi.c
+++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c
@@ -81,7 +81,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	int rc;
 
 	single_host_data = hostdata;
-	rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, 0);
+	rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, max_requests);
 	if (rc < 0) {
 		printk("viopath_open failed with rc %d in open_event_path\n",
 		       rc);
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 242b8873b33..ed22b96580c 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -238,6 +238,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	if (rc == 2) {
 		/* Adapter is good, but other end is not ready */
 		printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n");
+		retrc = 0;
 	} else if (rc != 0) {
 		printk(KERN_WARNING "ibmvscsi: Error %d opening adapter\n", rc);
 		goto reg_crq_failed;
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 3fd8a96f2af..bfac4441d89 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -257,7 +257,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
 static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
 {
     int sz = sp->use_sg - 1;
-    struct scatterlist *sg = (struct scatterlist *)sp->buffer;
+    struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
 			
     while(sz >= 0) {
 	vdma_free(sg[sz].dma_address);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index f81691fcf17..d44f9aac6b8 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -21,10 +21,12 @@
 
 struct lpfc_sli2_slim;
 
-#define LPFC_MAX_TARGET         256	/* max targets supported */
-#define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els req */
-#define LPFC_MAX_NS_RETRY       3	/* max NameServer retries */
 
+#define LPFC_MAX_TARGET		256	/* max number of targets supported */
+#define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
+					   requests */
+#define LPFC_MAX_NS_RETRY	3	/* Number of retry attempts to contact
+					   the NameServer  before giving up. */
 #define LPFC_DFT_HBA_Q_DEPTH	2048	/* max cmds per hba */
 #define LPFC_LC_HBA_Q_DEPTH	1024	/* max cmds per low cost hba */
 #define LPFC_LP101_HBA_Q_DEPTH	128	/* max cmds per low cost hba */
@@ -41,7 +43,6 @@ struct lpfc_sli2_slim;
 			     (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
 /* Provide maximum configuration definitions. */
 #define LPFC_DRVR_TIMEOUT	16	/* driver iocb timeout value in sec */
-#define MAX_FCP_TARGET		256	/* max num of FCP targets supported */
 #define FC_MAX_ADPTMSG		64
 
 #define MAX_HBAEVT	32
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index b62a72dfab2..5c68cdd8736 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -219,9 +219,19 @@ lpfc_issue_lip(struct Scsi_Host *host)
 		return -ENOMEM;
 
 	memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
-	lpfc_init_link(phba, pmboxq, phba->cfg_topology, phba->cfg_link_speed);
+	pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
+	pmboxq->mb.mbxOwner = OWN_HOST;
+
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
 
+	if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+		memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
+		lpfc_init_link(phba, pmboxq, phba->cfg_topology,
+			       phba->cfg_link_speed);
+		mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,
+						     phba->fc_ratov * 2);
+	}
+
 	if (mbxstatus == MBX_TIMEOUT)
 		pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 	else
@@ -233,51 +243,53 @@ lpfc_issue_lip(struct Scsi_Host *host)
 	return 0;
 }
 
-static ssize_t
-lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf)
+static int
+lpfc_selective_reset(struct lpfc_hba *phba)
 {
-	struct Scsi_Host *host = class_to_shost(cdev);
-	struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
-	return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
+	struct completion online_compl;
+	int status = 0;
+
+	init_completion(&online_compl);
+	lpfc_workq_post_event(phba, &status, &online_compl,
+			      LPFC_EVT_OFFLINE);
+	wait_for_completion(&online_compl);
+
+	if (status != 0)
+		return -EIO;
+
+	init_completion(&online_compl);
+	lpfc_workq_post_event(phba, &status, &online_compl,
+			      LPFC_EVT_ONLINE);
+	wait_for_completion(&online_compl);
+
+	if (status != 0)
+		return -EIO;
+
+	return 0;
 }
 
 static ssize_t
-lpfc_board_online_show(struct class_device *cdev, char *buf)
+lpfc_issue_reset(struct class_device *cdev, const char *buf, size_t count)
 {
 	struct Scsi_Host *host = class_to_shost(cdev);
 	struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+	int status = -EINVAL;
 
-	if (phba->fc_flag & FC_OFFLINE_MODE)
-		return snprintf(buf, PAGE_SIZE, "0\n");
+	if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
+		status = lpfc_selective_reset(phba);
+
+	if (status == 0)
+		return strlen(buf);
 	else
-		return snprintf(buf, PAGE_SIZE, "1\n");
+		return status;
 }
 
 static ssize_t
-lpfc_board_online_store(struct class_device *cdev, const char *buf,
-								size_t count)
+lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf)
 {
 	struct Scsi_Host *host = class_to_shost(cdev);
 	struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
-	struct completion online_compl;
-	int val=0, status=0;
-
-	if (sscanf(buf, "%d", &val) != 1)
-		return -EINVAL;
-
-	init_completion(&online_compl);
-
-	if (val)
-		lpfc_workq_post_event(phba, &status, &online_compl,
-							LPFC_EVT_ONLINE);
-	else
-		lpfc_workq_post_event(phba, &status, &online_compl,
-							LPFC_EVT_OFFLINE);
-	wait_for_completion(&online_compl);
-	if (!status)
-		return strlen(buf);
-	else
-		return -EIO;
+	return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
 }
 
 static ssize_t
@@ -532,10 +544,9 @@ static CLASS_DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show,
 			 NULL);
 static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show,
 			 NULL);
-static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR,
-			 lpfc_board_online_show, lpfc_board_online_store);
 static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
 			 lpfc_board_mode_show, lpfc_board_mode_store);
+static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
 
 static int lpfc_poll = 0;
 module_param(lpfc_poll, int, 0);
@@ -695,12 +706,12 @@ LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
 		 "during discovery");
 
 /*
-# lpfc_max_luns: maximum number of LUNs per target driver will support
-# Value range is [1,32768]. Default value is 256.
-# NOTE: The SCSI layer will scan each target for this many luns
+# lpfc_max_luns: maximum allowed LUN.
+# Value range is [0,65535]. Default value is 255.
+# NOTE: The SCSI layer might probe all allowed LUN on some old targets.
 */
-LPFC_ATTR_R(max_luns, 256, 1, 32768,
-	     "Maximum number of LUNs per target driver will support");
+LPFC_ATTR_R(max_luns, 255, 0, 65535,
+	     "Maximum allowed LUN");
 
 /*
 # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.
@@ -739,8 +750,8 @@ struct class_device_attribute *lpfc_host_attrs[] = {
 	&class_device_attr_lpfc_max_luns,
 	&class_device_attr_nport_evt_cnt,
 	&class_device_attr_management_version,
-	&class_device_attr_board_online,
 	&class_device_attr_board_mode,
+	&class_device_attr_issue_reset,
 	&class_device_attr_lpfc_poll,
 	&class_device_attr_lpfc_poll_tmo,
 	NULL,
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index ee22173fce4..517e9e4dd46 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -147,6 +147,7 @@ int lpfc_sli_hba_setup(struct lpfc_hba *);
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
+int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
 int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
 void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4126fd87956..b89f6cb641e 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -648,33 +648,32 @@ lpfc_more_plogi(struct lpfc_hba * phba)
 }
 
 static struct lpfc_nodelist *
-lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
+lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_dmabuf *prsp,
 			 struct lpfc_nodelist *ndlp)
 {
 	struct lpfc_nodelist *new_ndlp;
-	struct lpfc_dmabuf *pcmd, *prsp;
 	uint32_t *lp;
 	struct serv_parm *sp;
 	uint8_t name[sizeof (struct lpfc_name)];
 	uint32_t rc;
 
-	pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
-	prsp = (struct lpfc_dmabuf *) pcmd->list.next;
 	lp = (uint32_t *) prsp->virt;
 	sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t));
+	memset(name, 0, sizeof (struct lpfc_name));
 
 	/* Now we to find out if the NPort we are logging into, matches the WWPN
 	 * we have for that ndlp. If not, we have some work to do.
 	 */
 	new_ndlp = lpfc_findnode_wwpn(phba, NLP_SEARCH_ALL, &sp->portName);
 
-	memset(name, 0, sizeof (struct lpfc_name));
-	rc =  memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name));
-	if (!rc || (new_ndlp == ndlp)) {
+	if (new_ndlp == ndlp)
 		return ndlp;
-	}
 
 	if (!new_ndlp) {
+		rc =
+		   memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name));
+		if (!rc)
+			return ndlp;
 		new_ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_ATOMIC);
 		if (!new_ndlp)
 			return ndlp;
@@ -683,17 +682,21 @@ lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 	}
 
 	lpfc_unreg_rpi(phba, new_ndlp);
-	new_ndlp->nlp_prev_state = ndlp->nlp_state;
 	new_ndlp->nlp_DID = ndlp->nlp_DID;
-	new_ndlp->nlp_state = NLP_STE_PLOGI_ISSUE;
-	lpfc_nlp_list(phba, new_ndlp, NLP_PLOGI_LIST);
+	new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
+	new_ndlp->nlp_state = ndlp->nlp_state;
+	lpfc_nlp_list(phba, new_ndlp, ndlp->nlp_flag & NLP_LIST_MASK);
 
 	/* Move this back to NPR list */
-	lpfc_unreg_rpi(phba, ndlp);
-	ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */
-	ndlp->nlp_state = NLP_STE_NPR_NODE;
-	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
-
+	if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+	}
+	else {
+		lpfc_unreg_rpi(phba, ndlp);
+		ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */
+		ndlp->nlp_state = NLP_STE_NPR_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
+	}
 	return new_ndlp;
 }
 
@@ -703,6 +706,7 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 {
 	IOCB_t *irsp;
 	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *prsp;
 	int disc, rc, did, type;
 
 
@@ -769,7 +773,10 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 		}
 	} else {
 		/* Good status, call state machine */
-		ndlp = lpfc_plogi_confirm_nport(phba, cmdiocb, ndlp);
+		prsp = list_entry(((struct lpfc_dmabuf *)
+			cmdiocb->context2)->list.next,
+			struct lpfc_dmabuf, list);
+		ndlp = lpfc_plogi_confirm_nport(phba, prsp, ndlp);
 		rc = lpfc_disc_state_machine(phba, ndlp, cmdiocb,
 					NLP_EVT_CMPL_PLOGI);
 	}
@@ -3282,10 +3289,9 @@ lpfc_els_timeout_handler(struct lpfc_hba *phba)
 		} else
 			lpfc_sli_release_iocbq(phba, piocb);
 	}
-	if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt) {
-		phba->els_tmofunc.expires = jiffies + HZ * timeout;
-		add_timer(&phba->els_tmofunc);
-	}
+	if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt)
+		mod_timer(&phba->els_tmofunc, jiffies + HZ * timeout);
+
 	spin_unlock_irq(phba->host->host_lock);
 }
 
@@ -3442,6 +3448,8 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 		if ((did & Fabric_DID_MASK) == Fabric_DID_MASK) {
 			ndlp->nlp_type |= NLP_FABRIC;
 		}
+		ndlp->nlp_state = NLP_STE_UNUSED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST);
 	}
 
 	phba->fc_stat.elsRcvFrame++;
@@ -3463,13 +3471,14 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 			rjt_err = 1;
 			break;
 		}
+		ndlp = lpfc_plogi_confirm_nport(phba, mp, ndlp);
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PLOGI);
 		break;
 	case ELS_CMD_FLOGI:
 		phba->fc_stat.elsRcvFLOGI++;
 		lpfc_els_rcv_flogi(phba, elsiocb, ndlp, newnode);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	case ELS_CMD_LOGO:
@@ -3492,7 +3501,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 		phba->fc_stat.elsRcvRSCN++;
 		lpfc_els_rcv_rscn(phba, elsiocb, ndlp, newnode);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	case ELS_CMD_ADISC:
@@ -3535,28 +3544,28 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 		phba->fc_stat.elsRcvLIRR++;
 		lpfc_els_rcv_lirr(phba, elsiocb, ndlp);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	case ELS_CMD_RPS:
 		phba->fc_stat.elsRcvRPS++;
 		lpfc_els_rcv_rps(phba, elsiocb, ndlp);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	case ELS_CMD_RPL:
 		phba->fc_stat.elsRcvRPL++;
 		lpfc_els_rcv_rpl(phba, elsiocb, ndlp);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	case ELS_CMD_RNID:
 		phba->fc_stat.elsRcvRNID++;
 		lpfc_els_rcv_rnid(phba, elsiocb, ndlp);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	default:
@@ -3568,7 +3577,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 				"%d:0115 Unknown ELS command x%x received from "
 				"NPORT x%x\n", phba->brd_no, cmd, did);
 		if (newnode) {
-			mempool_free( ndlp, phba->nlp_mem_pool);
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 		}
 		break;
 	}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index adb086009ae..4d6cf990c4f 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1084,7 +1084,7 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
 		fc_remote_port_rolechg(rport, rport_ids.roles);
 
 	if ((rport->scsi_target_id != -1) &&
-		(rport->scsi_target_id < MAX_FCP_TARGET)) {
+		(rport->scsi_target_id < LPFC_MAX_TARGET)) {
 		ndlp->nlp_sid = rport->scsi_target_id;
 	}
 
@@ -1313,7 +1313,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
 			if ((rport_add == mapped) &&
 			    ((!nlp->rport) ||
 			     (nlp->rport->scsi_target_id == -1) ||
-			     (nlp->rport->scsi_target_id >= MAX_FCP_TARGET))) {
+			     (nlp->rport->scsi_target_id >= LPFC_MAX_TARGET))) {
 				nlp->nlp_state = NLP_STE_UNMAPPED_NODE;
 				spin_lock_irq(phba->host->host_lock);
 				nlp->nlp_flag |= NLP_TGT_NO_SCSIID;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 81755a3f7c6..ef47b824cbe 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -71,6 +71,7 @@ lpfc_config_port_prep(struct lpfc_hba * phba)
 	uint16_t offset = 0;
 	static char licensed[56] =
 		    "key unlock for use with gnu public licensed code only\0";
+	static int init_key = 1;
 
 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb) {
@@ -82,10 +83,13 @@ lpfc_config_port_prep(struct lpfc_hba * phba)
 	phba->hba_state = LPFC_INIT_MBX_CMDS;
 
 	if (lpfc_is_LC_HBA(phba->pcidev->device)) {
-		uint32_t *ptext = (uint32_t *) licensed;
+		if (init_key) {
+			uint32_t *ptext = (uint32_t *) licensed;
 
-		for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
-			*ptext = cpu_to_be32(*ptext);
+			for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
+				*ptext = cpu_to_be32(*ptext);
+			init_key = 0;
+		}
 
 		lpfc_read_nv(phba, pmb);
 		memset((char*)mb->un.varRDnvp.rsvd3, 0,
@@ -405,19 +409,26 @@ lpfc_config_port_post(struct lpfc_hba * phba)
 	}
 	/* MBOX buffer will be freed in mbox compl */
 
-	i = 0;
+	return (0);
+}
+
+static int
+lpfc_discovery_wait(struct lpfc_hba *phba)
+{
+	int i = 0;
+
 	while ((phba->hba_state != LPFC_HBA_READY) ||
 	       (phba->num_disc_nodes) || (phba->fc_prli_sent) ||
 	       ((phba->fc_map_cnt == 0) && (i<2)) ||
-	       (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
+	       (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
 		/* Check every second for 30 retries. */
 		i++;
 		if (i > 30) {
-			break;
+			return -ETIMEDOUT;
 		}
 		if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
 			/* The link is down.  Set linkdown timeout */
-			break;
+			return -ETIMEDOUT;
 		}
 
 		/* Delay for 1 second to give discovery time to complete. */
@@ -425,12 +436,7 @@ lpfc_config_port_post(struct lpfc_hba * phba)
 
 	}
 
-	/* Since num_disc_nodes keys off of PLOGI, delay a bit to let
-	 * any potential PRLIs to flush thru the SLI sub-system.
-	 */
-	msleep(50);
-
-	return (0);
+	return 0;
 }
 
 /************************************************************************/
@@ -1339,7 +1345,8 @@ lpfc_offline(struct lpfc_hba * phba)
 	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	unsigned long iflag;
-	int i = 0;
+	int i;
+	int cnt = 0;
 
 	if (!phba)
 		return 0;
@@ -1348,17 +1355,27 @@ lpfc_offline(struct lpfc_hba * phba)
 		return 0;
 
 	psli = &phba->sli;
-	pring = &psli->ring[psli->fcp_ring];
 
 	lpfc_linkdown(phba);
+	lpfc_sli_flush_mbox_queue(phba);
 
-	/* The linkdown event takes 30 seconds to timeout. */
-	while (pring->txcmplq_cnt) {
-		mdelay(10);
-		if (i++ > 3000)
-			break;
+	for (i = 0; i < psli->num_rings; i++) {
+		pring = &psli->ring[i];
+		/* The linkdown event takes 30 seconds to timeout. */
+		while (pring->txcmplq_cnt) {
+			mdelay(10);
+			if (cnt++ > 3000) {
+				lpfc_printf_log(phba,
+					KERN_WARNING, LOG_INIT,
+					"%d:0466 Outstanding IO when "
+					"bringing Adapter offline\n",
+					phba->brd_no);
+				break;
+			}
+		}
 	}
 
+
 	/* stop all timers associated with this hba */
 	lpfc_stop_timer(phba);
 	phba->work_hba_events = 0;
@@ -1639,6 +1656,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_free_irq;
 	}
 
+	lpfc_discovery_wait(phba);
+
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
 		spin_lock_irq(phba->host->host_lock);
 		lpfc_poll_start_timer(phba);
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 07017658ac5..066292d3995 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -133,6 +133,11 @@ lpfc_mem_free(struct lpfc_hba * phba)
 
 	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
 	pci_pool_destroy(phba->lpfc_mbuf_pool);
+
+	/* Free the iocb lookup array */
+	kfree(psli->iocbq_lookup);
+	psli->iocbq_lookup = NULL;
+
 }
 
 void *
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 27d60ad897c..bd0b0e293d6 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1110,6 +1110,17 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_hba * phba,
 				phba->brd_no,
 				did, mb->mbxStatus, phba->hba_state);
 
+		/*
+		 * If RegLogin failed due to lack of HBA resources do not
+		 * retry discovery.
+		 */
+		if (mb->mbxStatus == MBXERR_RPI_FULL) {
+			ndlp->nlp_prev_state = NLP_STE_UNUSED_NODE;
+			ndlp->nlp_state = NLP_STE_UNUSED_NODE;
+			lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST);
+			return ndlp->nlp_state;
+		}
+
 		/* Put ndlp in npr list set plogi timer for 1 sec */
 		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
 		spin_lock_irq(phba->host->host_lock);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index aea1ee472f3..a760a44173d 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -153,22 +153,6 @@ static void
 lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
 {
 	unsigned long iflag = 0;
-	/*
-	 * There are only two special cases to consider.  (1) the scsi command
-	 * requested scatter-gather usage or (2) the scsi command allocated
-	 * a request buffer, but did not request use_sg.  There is a third
-	 * case, but it does not require resource deallocation.
-	 */
-	if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
-		dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
-				psb->seg_cnt, psb->pCmd->sc_data_direction);
-	} else {
-		 if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
-			dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
-						psb->pCmd->request_bufflen,
-						psb->pCmd->sc_data_direction);
-		 }
-	}
 
 	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
 	psb->pCmd = NULL;
@@ -282,6 +266,27 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd)
 }
 
 static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+{
+	/*
+	 * There are only two special cases to consider.  (1) the scsi command
+	 * requested scatter-gather usage or (2) the scsi command allocated
+	 * a request buffer, but did not request use_sg.  There is a third
+	 * case, but it does not require resource deallocation.
+	 */
+	if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
+		dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
+				psb->seg_cnt, psb->pCmd->sc_data_direction);
+	} else {
+		 if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
+			dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
+						psb->pCmd->request_bufflen,
+						psb->pCmd->sc_data_direction);
+		 }
+	}
+}
+
+static void
 lpfc_handle_fcp_err(struct lpfc_scsi_buf *lpfc_cmd)
 {
 	struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
@@ -454,6 +459,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	cmd->scsi_done(cmd);
 
 	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
+		lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return;
 	}
@@ -511,6 +517,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		}
 	}
 
+	lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
 	lpfc_release_scsi_buf(phba, lpfc_cmd);
 }
 
@@ -609,6 +616,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd,
 static int
 lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 			     struct lpfc_scsi_buf *lpfc_cmd,
+			     unsigned int lun,
 			     uint8_t task_mgmt_cmd)
 {
 	struct lpfc_sli *psli;
@@ -627,8 +635,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 	piocb = &piocbq->iocb;
 
 	fcp_cmnd = lpfc_cmd->fcp_cmnd;
-	int_to_scsilun(lpfc_cmd->pCmd->device->lun,
-			&lpfc_cmd->fcp_cmnd->fcp_lun);
+	int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun);
 	fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
 
 	piocb->ulpCommand = CMD_FCP_ICMND64_CR;
@@ -655,14 +662,16 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 
 static int
 lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba,
-		    unsigned  tgt_id, struct lpfc_rport_data *rdata)
+		    unsigned  tgt_id, unsigned int lun,
+		    struct lpfc_rport_data *rdata)
 {
 	struct lpfc_iocbq *iocbq;
 	struct lpfc_iocbq *iocbqrsp;
 	int ret;
 
 	lpfc_cmd->rdata = rdata;
-	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
+	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, lun,
+					   FCP_TARGET_RESET);
 	if (!ret)
 		return FAILED;
 
@@ -822,6 +831,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	return 0;
 
  out_host_busy_free_buf:
+	lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
 	lpfc_release_scsi_buf(phba, lpfc_cmd);
  out_host_busy:
 	return SCSI_MLQUEUE_HOST_BUSY;
@@ -969,12 +979,12 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	if (lpfc_cmd == NULL)
 		goto out;
 
-	lpfc_cmd->pCmd = cmnd;
 	lpfc_cmd->timeout = 60;
 	lpfc_cmd->scsi_hba = phba;
 	lpfc_cmd->rdata = rdata;
 
-	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
+	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, cmnd->device->lun,
+					   FCP_LUN_RESET);
 	if (!ret)
 		goto out_free_scsi_buf;
 
@@ -1001,7 +1011,6 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	cmd_status = iocbqrsp->iocb.ulpStatus;
 
 	lpfc_sli_release_iocbq(phba, iocbqrsp);
-	lpfc_release_scsi_buf(phba, lpfc_cmd);
 
 	/*
 	 * All outstanding txcmplq I/Os should have been aborted by the device.
@@ -1040,6 +1049,8 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	}
 
 out_free_scsi_buf:
+	lpfc_release_scsi_buf(phba, lpfc_cmd);
+
 	lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
 			"%d:0713 SCSI layer issued LUN reset (%d, %d) "
 			"Data: x%x x%x x%x\n",
@@ -1070,7 +1081,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 
 	/* The lpfc_cmd storage is reused.  Set all loop invariants. */
 	lpfc_cmd->timeout = 60;
-	lpfc_cmd->pCmd = cmnd;
 	lpfc_cmd->scsi_hba = phba;
 
 	/*
@@ -1078,7 +1088,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	 * targets known to the driver.  Should any target reset
 	 * fail, this routine returns failure to the midlayer.
 	 */
-	for (i = 0; i < MAX_FCP_TARGET; i++) {
+	for (i = 0; i < LPFC_MAX_TARGET; i++) {
 		/* Search the mapped list for this target ID */
 		match = 0;
 		list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
@@ -1090,8 +1100,8 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 		if (!match)
 			continue;
 
-		ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba,
-					  i, ndlp->rport->dd_data);
+		ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba, i, cmnd->device->lun,
+					  ndlp->rport->dd_data);
 		if (ret != SUCCESS) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
 				"%d:0713 Bus Reset on target %d failed\n",
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index bb69a7a1ec5..350a625fa22 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -191,35 +191,12 @@ static int
 lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba,
 			struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb)
 {
-	uint16_t iotag;
-
 	list_add_tail(&piocb->list, &pring->txcmplq);
 	pring->txcmplq_cnt++;
 	if (unlikely(pring->ringno == LPFC_ELS_RING))
 		mod_timer(&phba->els_tmofunc,
 					jiffies + HZ * (phba->fc_ratov << 1));
 
-	if (pring->fast_lookup) {
-		/* Setup fast lookup based on iotag for completion */
-		iotag = piocb->iocb.ulpIoTag;
-		if (iotag && (iotag < pring->fast_iotag))
-			*(pring->fast_lookup + iotag) = piocb;
-		else {
-
-			/* Cmd ring <ringno> put: iotag <iotag> greater then
-			   configured max <fast_iotag> wd0 <icmd> */
-			lpfc_printf_log(phba,
-					KERN_ERR,
-					LOG_SLI,
-					"%d:0316 Cmd ring %d put: iotag x%x "
-					"greater then configured max x%x "
-					"wd0 x%x\n",
-					phba->brd_no,
-					pring->ringno, iotag,
-					pring->fast_iotag,
-					*(((uint32_t *)(&piocb->iocb)) + 7));
-		}
-	}
 	return (0);
 }
 
@@ -601,7 +578,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba * phba)
 			/* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus
 			   <status> */
 			lpfc_printf_log(phba,
-					KERN_ERR,
+					KERN_WARNING,
 					LOG_MBOX | LOG_SLI,
 					"%d:0304 Stray Mailbox Interrupt "
 					"mbxCommand x%x mbxStatus x%x\n",
@@ -1570,8 +1547,8 @@ lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask)
 
 void lpfc_reset_barrier(struct lpfc_hba * phba)
 {
-	uint32_t * resp_buf;
-	uint32_t * mbox_buf;
+	uint32_t __iomem *resp_buf;
+	uint32_t __iomem *mbox_buf;
 	volatile uint32_t mbox;
 	uint32_t hc_copy;
 	int  i;
@@ -1587,7 +1564,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba)
 	 * Tell the other part of the chip to suspend temporarily all
 	 * its DMA activity.
 	 */
-	resp_buf =  (uint32_t *)phba->MBslimaddr;
+	resp_buf = phba->MBslimaddr;
 
 	/* Disable the error attention */
 	hc_copy = readl(phba->HCregaddr);
@@ -1605,7 +1582,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba)
 	((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
 
 	writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
-	mbox_buf = (uint32_t *)phba->MBslimaddr;
+	mbox_buf = phba->MBslimaddr;
 	writel(mbox, mbox_buf);
 
 	for (i = 0;
@@ -1805,7 +1782,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
 		skip_post = 0;
 		word0 = 0;	/* This is really setting up word1 */
 	}
-	to_slim = (uint8_t *) phba->MBslimaddr + sizeof (uint32_t);
+	to_slim = phba->MBslimaddr + sizeof (uint32_t);
 	writel(*(uint32_t *) mb, to_slim);
 	readl(to_slim); /* flush */
 
@@ -2659,8 +2636,6 @@ lpfc_sli_hba_down(struct lpfc_hba * phba)
 
 		INIT_LIST_HEAD(&(pring->txq));
 
-		kfree(pring->fast_lookup);
-		pring->fast_lookup = NULL;
 	}
 
 	spin_unlock_irqrestore(phba->host->host_lock, flags);
@@ -3110,6 +3085,24 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
 	return retval;
 }
 
+int
+lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+{
+	int i = 0;
+
+	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !phba->stopped) {
+		if (i++ > LPFC_MBOX_TMO * 1000)
+			return 1;
+
+		if (lpfc_sli_handle_mb_event(phba) == 0)
+			i = 0;
+
+		msleep(1);
+	}
+
+	return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+}
+
 irqreturn_t
 lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs)
 {
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index a52d6c6cf08..d8ef0d2894d 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -135,8 +135,6 @@ struct lpfc_sli_ring {
 	uint32_t fast_iotag;	/* max fastlookup based iotag           */
 	uint32_t iotag_ctr;	/* keeps track of the next iotag to use */
 	uint32_t iotag_max;	/* max iotag value to use               */
-	struct lpfc_iocbq ** fast_lookup; /* array of IOCB ptrs indexed by
-					   iotag */
 	struct list_head txq;
 	uint16_t txq_cnt;	/* current length of queue */
 	uint16_t txq_max;	/* max length */
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 6b737568b83..10e89c6ae82 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.1.6"
+#define LPFC_DRIVER_VERSION "8.1.7"
 
 #define LPFC_DRIVER_NAME "lpfc"
 
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 93edaa8696c..89ef34df5a1 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -378,7 +378,7 @@ static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
 		int nseg;
 
 		total = 0;
-		scl = (struct scatterlist *) cmd->buffer;
+		scl = (struct scatterlist *) cmd->request_buffer;
 		nseg = pci_map_sg(state->pdev, scl, cmd->use_sg,
 				cmd->sc_data_direction);
 		for (i = 0; i < nseg; ++i) {
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index c88717727be..5572981a9f9 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1268,7 +1268,7 @@ static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd)
 		if (cmd->use_sg > 0) {
 			int nseg;
 			total = 0;
-			scl = (struct scatterlist *) cmd->buffer;
+			scl = (struct scatterlist *) cmd->request_buffer;
 			off = ms->data_ptr;
 			nseg = pci_map_sg(ms->pdev, scl, cmd->use_sg,
 					  cmd->sc_data_direction);
diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c
index 7abf64d1bfc..0bd9c60e645 100644
--- a/drivers/scsi/pluto.c
+++ b/drivers/scsi/pluto.c
@@ -169,8 +169,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt)
 		SCpnt->request->rq_status = RQ_SCSI_BUSY;
 		
 		SCpnt->done = pluto_detect_done;
-		SCpnt->bufflen = 256;
-		SCpnt->buffer = fcs[i].inquiry;
 		SCpnt->request_bufflen = 256;
 		SCpnt->request_buffer = fcs[i].inquiry;
 		PLD(("set up %d %08lx\n", i, (long)SCpnt))
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 69e0551a81d..5b2f0741a55 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -874,7 +874,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
 	if (Cmnd->use_sg) {
 		int sg_count;
 
-		sg = (struct scatterlist *) Cmnd->buffer;
+		sg = (struct scatterlist *) Cmnd->request_buffer;
 		sg_count = sbus_map_sg(qpti->sdev, sg, Cmnd->use_sg, Cmnd->sc_data_direction);
 
 		ds = cmd->dataseg;
@@ -1278,7 +1278,7 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti)
 
 		if (Cmnd->use_sg) {
 			sbus_unmap_sg(qpti->sdev,
-				      (struct scatterlist *)Cmnd->buffer,
+				      (struct scatterlist *)Cmnd->request_buffer,
 				      Cmnd->use_sg,
 				      Cmnd->sc_data_direction);
 		} else {
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2ab7df0dcfe..b332caddd5b 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -346,7 +346,7 @@ void scsi_log_send(struct scsi_cmnd *cmd)
 			if (level > 3) {
 				printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
 				       " done = 0x%p, queuecommand 0x%p\n",
-					cmd->buffer, cmd->bufflen,
+					cmd->request_buffer, cmd->request_bufflen,
 					cmd->done,
 					sdev->host->hostt->queuecommand);
 
@@ -661,11 +661,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
  */
 int scsi_retry_command(struct scsi_cmnd *cmd)
 {
-	/*
-	 * Restore the SCSI command state.
-	 */
-	scsi_setup_cmd_retry(cmd);
-
         /*
          * Zero the sense information from the last time we tried
          * this command.
@@ -711,10 +706,6 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
 				"Notifying upper driver of completion "
 				"(result %x)\n", cmd->result));
 
-	/*
-	 * We can get here with use_sg=0, causing a panic in the upper level
-	 */
-	cmd->use_sg = cmd->old_use_sg;
 	cmd->done(cmd);
 }
 EXPORT_SYMBOL(scsi_finish_command);
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 9c63b00773c..a80303c6b3f 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -286,7 +286,7 @@ static int inquiry_evpd_83(unsigned char * arr, int target_dev_id,
 			   int dev_id_num, const char * dev_id_str,
 			   int dev_id_str_len);
 static int inquiry_evpd_88(unsigned char * arr, int target_dev_id);
-static void do_create_driverfs_files(void);
+static int do_create_driverfs_files(void);
 static void do_remove_driverfs_files(void);
 
 static int sdebug_add_adapter(void);
@@ -2487,19 +2487,22 @@ static ssize_t sdebug_add_host_store(struct device_driver * ddp,
 DRIVER_ATTR(add_host, S_IRUGO | S_IWUSR, sdebug_add_host_show, 
 	    sdebug_add_host_store);
 
-static void do_create_driverfs_files(void)
+static int do_create_driverfs_files(void)
 {
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
-	driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
+	int ret;
+
+	ret = driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
+	ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
+	return ret;
 }
 
 static void do_remove_driverfs_files(void)
@@ -2522,6 +2525,7 @@ static int __init scsi_debug_init(void)
 	unsigned int sz;
 	int host_to_add;
 	int k;
+	int ret;
 
 	if (scsi_debug_dev_size_mb < 1)
 		scsi_debug_dev_size_mb = 1;  /* force minimum 1 MB ramdisk */
@@ -2560,12 +2564,32 @@ static int __init scsi_debug_init(void)
 	if (scsi_debug_num_parts > 0)
 		sdebug_build_parts(fake_storep);
 
-	init_all_queued();
+	ret = device_register(&pseudo_primary);
+	if (ret < 0) {
+		printk(KERN_WARNING "scsi_debug: device_register error: %d\n",
+			ret);
+		goto free_vm;
+	}
+	ret = bus_register(&pseudo_lld_bus);
+	if (ret < 0) {
+		printk(KERN_WARNING "scsi_debug: bus_register error: %d\n",
+			ret);
+		goto dev_unreg;
+	}
+	ret = driver_register(&sdebug_driverfs_driver);
+	if (ret < 0) {
+		printk(KERN_WARNING "scsi_debug: driver_register error: %d\n",
+			ret);
+		goto bus_unreg;
+	}
+	ret = do_create_driverfs_files();
+	if (ret < 0) {
+		printk(KERN_WARNING "scsi_debug: driver_create_file error: %d\n",
+			ret);
+		goto del_files;
+	}
 
-	device_register(&pseudo_primary);
-	bus_register(&pseudo_lld_bus);
-	driver_register(&sdebug_driverfs_driver);
-	do_create_driverfs_files();
+	init_all_queued();
 
 	sdebug_driver_template.proc_name = (char *)sdebug_proc_name;
 
@@ -2585,6 +2609,18 @@ static int __init scsi_debug_init(void)
 		       scsi_debug_add_host);
 	}
 	return 0;
+
+del_files:
+	do_remove_driverfs_files();
+	driver_unregister(&sdebug_driverfs_driver);
+bus_unreg:
+	bus_unregister(&pseudo_lld_bus);
+dev_unreg:
+	device_unregister(&pseudo_primary);
+free_vm:
+	vfree(fake_storep);
+
+	return ret;
 }
 
 static void __exit scsi_debug_exit(void)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 6683d596234..6a5b731bd5b 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -460,19 +460,67 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
  * Return value:
  *    SUCCESS or FAILED or NEEDS_RETRY
  **/
-static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
+static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense)
 {
 	struct scsi_device *sdev = scmd->device;
 	struct Scsi_Host *shost = sdev->host;
+	int old_result = scmd->result;
 	DECLARE_COMPLETION(done);
 	unsigned long timeleft;
 	unsigned long flags;
+	unsigned char old_cmnd[MAX_COMMAND_SIZE];
+	enum dma_data_direction old_data_direction;
+	unsigned short old_use_sg;
+	unsigned char old_cmd_len;
+	unsigned old_bufflen;
+	void *old_buffer;
 	int rtn;
 
+	/*
+	 * We need saved copies of a number of fields - this is because
+	 * error handling may need to overwrite these with different values
+	 * to run different commands, and once error handling is complete,
+	 * we will need to restore these values prior to running the actual
+	 * command.
+	 */
+	old_buffer = scmd->request_buffer;
+	old_bufflen = scmd->request_bufflen;
+	memcpy(old_cmnd, scmd->cmnd, sizeof(scmd->cmnd));
+	old_data_direction = scmd->sc_data_direction;
+	old_cmd_len = scmd->cmd_len;
+	old_use_sg = scmd->use_sg;
+
+	if (copy_sense) {
+		int gfp_mask = GFP_ATOMIC;
+
+		if (shost->hostt->unchecked_isa_dma)
+			gfp_mask |= __GFP_DMA;
+
+		scmd->sc_data_direction = DMA_FROM_DEVICE;
+		scmd->request_bufflen = 252;
+		scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask);
+		if (!scmd->request_buffer)
+			return FAILED;
+	} else {
+		scmd->request_buffer = NULL;
+		scmd->request_bufflen = 0;
+		scmd->sc_data_direction = DMA_NONE;
+	}
+
+	scmd->underflow = 0;
+	scmd->use_sg = 0;
+	scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
+
 	if (sdev->scsi_level <= SCSI_2)
 		scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
 			(sdev->lun << 5 & 0xe0);
 
+	/*
+	 * Zero the sense buffer.  The scsi spec mandates that any
+	 * untransferred sense data should be interpreted as being zero.
+	 */
+	memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
+
 	shost->eh_action = &done;
 
 	spin_lock_irqsave(shost->host_lock, flags);
@@ -522,6 +570,29 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 		rtn = FAILED;
 	}
 
+
+	/*
+	 * Last chance to have valid sense data.
+	 */
+	if (copy_sense) {
+		if (!SCSI_SENSE_VALID(scmd)) {
+			memcpy(scmd->sense_buffer, scmd->request_buffer,
+			       sizeof(scmd->sense_buffer));
+		}
+		kfree(scmd->request_buffer);
+	}
+
+
+	/*
+	 * Restore original data
+	 */
+	scmd->request_buffer = old_buffer;
+	scmd->request_bufflen = old_bufflen;
+	memcpy(scmd->cmnd, old_cmnd, sizeof(scmd->cmnd));
+	scmd->sc_data_direction = old_data_direction;
+	scmd->cmd_len = old_cmd_len;
+	scmd->use_sg = old_use_sg;
+	scmd->result = old_result;
 	return rtn;
 }
 
@@ -537,56 +608,10 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 static int scsi_request_sense(struct scsi_cmnd *scmd)
 {
 	static unsigned char generic_sense[6] =
-	{REQUEST_SENSE, 0, 0, 0, 252, 0};
-	unsigned char *scsi_result;
-	int saved_result;
-	int rtn;
+		{REQUEST_SENSE, 0, 0, 0, 252, 0};
 
 	memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense));
-
-	scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0));
-
-
-	if (unlikely(!scsi_result)) {
-		printk(KERN_ERR "%s: cannot allocate scsi_result.\n",
-		       __FUNCTION__);
-		return FAILED;
-	}
-
-	/*
-	 * zero the sense buffer.  some host adapters automatically always
-	 * request sense, so it is not a good idea that
-	 * scmd->request_buffer and scmd->sense_buffer point to the same
-	 * address (db).  0 is not a valid sense code. 
-	 */
-	memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
-	memset(scsi_result, 0, 252);
-
-	saved_result = scmd->result;
-	scmd->request_buffer = scsi_result;
-	scmd->request_bufflen = 252;
-	scmd->use_sg = 0;
-	scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
-	scmd->sc_data_direction = DMA_FROM_DEVICE;
-	scmd->underflow = 0;
-
-	rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT);
-
-	/* last chance to have valid sense data */
-	if(!SCSI_SENSE_VALID(scmd)) {
-		memcpy(scmd->sense_buffer, scmd->request_buffer,
-		       sizeof(scmd->sense_buffer));
-	}
-
-	kfree(scsi_result);
-
-	/*
-	 * when we eventually call scsi_finish, we really wish to complete
-	 * the original request, so let's restore the original data. (db)
-	 */
-	scsi_setup_cmd_retry(scmd);
-	scmd->result = saved_result;
-	return rtn;
+	return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1);
 }
 
 /**
@@ -605,12 +630,6 @@ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
 {
 	scmd->device->host->host_failed--;
 	scmd->eh_eflags = 0;
-
-	/*
-	 * set this back so that the upper level can correctly free up
-	 * things.
-	 */
-	scsi_setup_cmd_retry(scmd);
 	list_move_tail(&scmd->eh_entry, done_q);
 }
 EXPORT_SYMBOL(scsi_eh_finish_cmd);
@@ -715,47 +734,26 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd)
 {
 	static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
 	int retry_cnt = 1, rtn;
-	int saved_result;
 
 retry_tur:
 	memcpy(scmd->cmnd, tur_command, sizeof(tur_command));
 
-	/*
-	 * zero the sense buffer.  the scsi spec mandates that any
-	 * untransferred sense data should be interpreted as being zero.
-	 */
-	memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
-
-	saved_result = scmd->result;
-	scmd->request_buffer = NULL;
-	scmd->request_bufflen = 0;
-	scmd->use_sg = 0;
-	scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
-	scmd->underflow = 0;
-	scmd->sc_data_direction = DMA_NONE;
 
-	rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT);
+	rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0);
 
-	/*
-	 * when we eventually call scsi_finish, we really wish to complete
-	 * the original request, so let's restore the original data. (db)
-	 */
-	scsi_setup_cmd_retry(scmd);
-	scmd->result = saved_result;
-
-	/*
-	 * hey, we are done.  let's look to see what happened.
-	 */
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
 		__FUNCTION__, scmd, rtn));
-	if (rtn == SUCCESS)
-		return 0;
-	else if (rtn == NEEDS_RETRY) {
+
+	switch (rtn) {
+	case NEEDS_RETRY:
 		if (retry_cnt--)
 			goto retry_tur;
+		/*FALLTHRU*/
+	case SUCCESS:
 		return 0;
+	default:
+		return 1;
 	}
-	return 1;
 }
 
 /**
@@ -837,44 +835,16 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
 static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
 {
 	static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
-	int rtn;
-	int saved_result;
 
-	if (!scmd->device->allow_restart)
-		return 1;
-
-	memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
-
-	/*
-	 * zero the sense buffer.  the scsi spec mandates that any
-	 * untransferred sense data should be interpreted as being zero.
-	 */
-	memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
-
-	saved_result = scmd->result;
-	scmd->request_buffer = NULL;
-	scmd->request_bufflen = 0;
-	scmd->use_sg = 0;
-	scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
-	scmd->underflow = 0;
-	scmd->sc_data_direction = DMA_NONE;
+	if (scmd->device->allow_restart) {
+		int rtn;
 
-	rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT);
-
-	/*
-	 * when we eventually call scsi_finish, we really wish to complete
-	 * the original request, so let's restore the original data. (db)
-	 */
-	scsi_setup_cmd_retry(scmd);
-	scmd->result = saved_result;
+		memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
+		rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0);
+		if (rtn == SUCCESS)
+			return 0;
+	}
 
-	/*
-	 * hey, we are done.  let's look to see what happened.
-	 */
-	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
-		__FUNCTION__, scmd, rtn));
-	if (rtn == SUCCESS)
-		return 0;
 	return 1;
 }
 
@@ -1684,8 +1654,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
     
 	scmd->scsi_done		= scsi_reset_provider_done_command;
 	scmd->done			= NULL;
-	scmd->buffer			= NULL;
-	scmd->bufflen			= 0;
 	scmd->request_buffer		= NULL;
 	scmd->request_bufflen		= 0;
 
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 08af9aae7df..077c1c69121 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -436,60 +436,16 @@ EXPORT_SYMBOL_GPL(scsi_execute_async);
  *
  * Arguments:   cmd	- command that is ready to be queued.
  *
- * Returns:     Nothing
- *
  * Notes:       This function has the job of initializing a number of
  *              fields related to error handling.   Typically this will
  *              be called once for each command, as required.
  */
-static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
+static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
 {
 	cmd->serial_number = 0;
-
 	memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
-
 	if (cmd->cmd_len == 0)
 		cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
-
-	/*
-	 * We need saved copies of a number of fields - this is because
-	 * error handling may need to overwrite these with different values
-	 * to run different commands, and once error handling is complete,
-	 * we will need to restore these values prior to running the actual
-	 * command.
-	 */
-	cmd->old_use_sg = cmd->use_sg;
-	cmd->old_cmd_len = cmd->cmd_len;
-	cmd->sc_old_data_direction = cmd->sc_data_direction;
-	cmd->old_underflow = cmd->underflow;
-	memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd));
-	cmd->buffer = cmd->request_buffer;
-	cmd->bufflen = cmd->request_bufflen;
-
-	return 1;
-}
-
-/*
- * Function:   scsi_setup_cmd_retry()
- *
- * Purpose:    Restore the command state for a retry
- *
- * Arguments:  cmd	- command to be restored
- *
- * Returns:    Nothing
- *
- * Notes:      Immediately prior to retrying a command, we need
- *             to restore certain fields that we saved above.
- */
-void scsi_setup_cmd_retry(struct scsi_cmnd *cmd)
-{
-	memcpy(cmd->cmnd, cmd->data_cmnd, sizeof(cmd->data_cmnd));
-	cmd->request_buffer = cmd->buffer;
-	cmd->request_bufflen = cmd->bufflen;
-	cmd->use_sg = cmd->old_use_sg;
-	cmd->cmd_len = cmd->old_cmd_len;
-	cmd->sc_data_direction = cmd->sc_old_data_direction;
-	cmd->underflow = cmd->old_underflow;
 }
 
 void scsi_device_unbusy(struct scsi_device *sdev)
@@ -807,22 +763,13 @@ static void scsi_free_sgtable(struct scatterlist *sgl, int index)
  */
 static void scsi_release_buffers(struct scsi_cmnd *cmd)
 {
-	struct request *req = cmd->request;
-
-	/*
-	 * Free up any indirection buffers we allocated for DMA purposes. 
-	 */
 	if (cmd->use_sg)
 		scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
-	else if (cmd->request_buffer != req->buffer)
-		kfree(cmd->request_buffer);
 
 	/*
 	 * Zero these out.  They now point to freed memory, and it is
 	 * dangerous to hang onto the pointers.
 	 */
-	cmd->buffer  = NULL;
-	cmd->bufflen = 0;
 	cmd->request_buffer = NULL;
 	cmd->request_bufflen = 0;
 }
@@ -858,7 +805,7 @@ static void scsi_release_buffers(struct scsi_cmnd *cmd)
 void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
 	int result = cmd->result;
-	int this_count = cmd->bufflen;
+	int this_count = cmd->request_bufflen;
 	request_queue_t *q = cmd->device->request_queue;
 	struct request *req = cmd->request;
 	int clear_errors = 1;
@@ -866,28 +813,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	int sense_valid = 0;
 	int sense_deferred = 0;
 
-	/*
-	 * Free up any indirection buffers we allocated for DMA purposes. 
-	 * For the case of a READ, we need to copy the data out of the
-	 * bounce buffer and into the real buffer.
-	 */
-	if (cmd->use_sg)
-		scsi_free_sgtable(cmd->buffer, cmd->sglist_len);
-	else if (cmd->buffer != req->buffer) {
-		if (rq_data_dir(req) == READ) {
-			unsigned long flags;
-			char *to = bio_kmap_irq(req->bio, &flags);
-			memcpy(to, cmd->buffer, cmd->bufflen);
-			bio_kunmap_irq(to, &flags);
-		}
-		kfree(cmd->buffer);
-	}
+	scsi_release_buffers(cmd);
 
 	if (result) {
 		sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
 		if (sense_valid)
 			sense_deferred = scsi_sense_is_deferred(&sshdr);
 	}
+
 	if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
 		req->errors = result;
 		if (result) {
@@ -908,15 +841,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	}
 
 	/*
-	 * Zero these out.  They now point to freed memory, and it is
-	 * dangerous to hang onto the pointers.
-	 */
-	cmd->buffer  = NULL;
-	cmd->bufflen = 0;
-	cmd->request_buffer = NULL;
-	cmd->request_bufflen = 0;
-
-	/*
 	 * Next deal with any sectors which we were able to correctly
 	 * handle.
 	 */
@@ -1012,7 +936,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 			if (!(req->flags & REQ_QUIET)) {
 				scmd_printk(KERN_INFO, cmd,
 					    "Volume overflow, CDB: ");
-				__scsi_print_command(cmd->data_cmnd);
+				__scsi_print_command(cmd->cmnd);
 				scsi_print_sense("", cmd);
 			}
 			/* See SSC3rXX or current. */
@@ -1143,7 +1067,7 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
 	 * successfully. Since this is a REQ_BLOCK_PC command the
 	 * caller should check the request's errors value
 	 */
-	scsi_io_completion(cmd, cmd->bufflen);
+	scsi_io_completion(cmd, cmd->request_bufflen);
 }
 
 static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index e2fbe9a9d5a..ae24c85aaee 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -57,7 +57,6 @@ extern int scsi_eh_scmd_add(struct scsi_cmnd *, int);
 
 /* scsi_lib.c */
 extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
-extern void scsi_setup_cmd_retry(struct scsi_cmnd *cmd);
 extern void scsi_device_unbusy(struct scsi_device *sdev);
 extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
 extern void scsi_next_command(struct scsi_cmnd *cmd);
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index dd075627e60..5a625c3fdda 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -41,6 +41,7 @@ struct sas_host_attrs {
 	struct mutex lock;
 	u32 next_target_id;
 	u32 next_expander_id;
+	int next_port_id;
 };
 #define to_sas_host_attrs(host)	((struct sas_host_attrs *)(host)->shost_data)
 
@@ -146,6 +147,7 @@ static int sas_host_setup(struct transport_container *tc, struct device *dev,
 	mutex_init(&sas_host->lock);
 	sas_host->next_target_id = 0;
 	sas_host->next_expander_id = 0;
+	sas_host->next_port_id = 0;
 	return 0;
 }
 
@@ -327,7 +329,7 @@ sas_phy_protocol_attr(identify.target_port_protocols,
 sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
 		unsigned long long);
 sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
-//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8);
+//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", int);
 sas_phy_linkspeed_attr(negotiated_linkrate);
 sas_phy_linkspeed_attr(minimum_linkrate_hw);
 sas_phy_linkspeed_attr(minimum_linkrate);
@@ -590,6 +592,38 @@ struct sas_port *sas_port_alloc(struct device *parent, int port_id)
 }
 EXPORT_SYMBOL(sas_port_alloc);
 
+/** sas_port_alloc_num - allocate and initialize a SAS port structure
+ *
+ * @parent:	parent device
+ *
+ * Allocates a SAS port structure and a number to go with it.  This
+ * interface is really for adapters where the port number has no
+ * meansing, so the sas class should manage them.  It will be added to
+ * the device tree below the device specified by @parent which must be
+ * either a Scsi_Host or a sas_expander_device.
+ *
+ * Returns %NULL on error
+ */
+struct sas_port *sas_port_alloc_num(struct device *parent)
+{
+	int index;
+	struct Scsi_Host *shost = dev_to_shost(parent);
+	struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+
+	/* FIXME: use idr for this eventually */
+	mutex_lock(&sas_host->lock);
+	if (scsi_is_sas_expander_device(parent)) {
+		struct sas_rphy *rphy = dev_to_rphy(parent);
+		struct sas_expander_device *exp = rphy_to_expander_device(rphy);
+
+		index = exp->next_port_id++;
+	} else
+		index = sas_host->next_port_id++;
+	mutex_unlock(&sas_host->lock);
+	return sas_port_alloc(parent, index);
+}
+EXPORT_SYMBOL(sas_port_alloc_num);
+
 /**
  * sas_port_add - add a SAS port to the device hierarchy
  *
@@ -658,6 +692,13 @@ void sas_port_delete(struct sas_port *port)
 	}
 	mutex_unlock(&port->phy_list_mutex);
 
+	if (port->is_backlink) {
+		struct device *parent = port->dev.parent;
+
+		sysfs_remove_link(&port->dev.kobj, parent->bus_id);
+		port->is_backlink = 0;
+	}
+
 	transport_remove_device(dev);
 	device_del(dev);
 	transport_destroy_device(dev);
@@ -733,6 +774,19 @@ void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy)
 }
 EXPORT_SYMBOL(sas_port_delete_phy);
 
+void sas_port_mark_backlink(struct sas_port *port)
+{
+	struct device *parent = port->dev.parent->parent->parent;
+
+	if (port->is_backlink)
+		return;
+	port->is_backlink = 1;
+	sysfs_create_link(&port->dev.kobj, &parent->kobj,
+			  parent->bus_id);
+
+}
+EXPORT_SYMBOL(sas_port_mark_backlink);
+
 /*
  * SAS remote PHY attributes.
  */
@@ -1140,7 +1194,7 @@ int sas_rphy_add(struct sas_rphy *rphy)
 
 	if (identify->device_type == SAS_END_DEVICE &&
 	    rphy->scsi_target_id != -1) {
-		scsi_scan_target(&rphy->dev, parent->port_identifier,
+		scsi_scan_target(&rphy->dev, 0,
 				rphy->scsi_target_id, ~0, 0);
 	}
 
@@ -1242,15 +1296,13 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 
 	mutex_lock(&sas_host->lock);
 	list_for_each_entry(rphy, &sas_host->rphy_list, list) {
-		struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
-
 		if (rphy->identify.device_type != SAS_END_DEVICE ||
 		    rphy->scsi_target_id == -1)
 			continue;
 
-		if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
+		if ((channel == SCAN_WILD_CARD || channel == 0) &&
 		    (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) {
-			scsi_scan_target(&rphy->dev, parent->port_identifier,
+			scsi_scan_target(&rphy->dev, 0,
 					 rphy->scsi_target_id, lun, 1);
 		}
 	}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3225d31449e..98bd3aab973 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -502,8 +502,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
 		SCpnt->cmnd[4] = (unsigned char) this_count;
 		SCpnt->cmnd[5] = 0;
 	}
-	SCpnt->request_bufflen = SCpnt->bufflen =
-			this_count * sdp->sector_size;
+	SCpnt->request_bufflen = this_count * sdp->sector_size;
 
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index 3f312a84c6a..2679ea8bff1 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -1002,7 +1002,7 @@ connect_loop:
 			}
 #endif
 
-			buffer = (struct scatterlist *) SCint->buffer;
+			buffer = (struct scatterlist *) SCint->request_buffer;
 			len = buffer->length;
 			data = page_address(buffer->page) + buffer->offset;
 		} else {
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index fd94408577e..fae6e95a629 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -360,7 +360,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt)
 				"mismatch count %d, bytes %d\n",
 				size, SCpnt->request_bufflen);
 			if (SCpnt->request_bufflen > size)
-				SCpnt->request_bufflen = SCpnt->bufflen = size;
+				SCpnt->request_bufflen = size;
 		}
 	}
 
@@ -387,8 +387,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt)
 
 	if (this_count > 0xffff) {
 		this_count = 0xffff;
-		SCpnt->request_bufflen = SCpnt->bufflen =
-				this_count * s_size;
+		SCpnt->request_bufflen = this_count * s_size;
 	}
 
 	SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 756ceb93ddc..7f669b60067 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -368,7 +368,7 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
 		       SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
 		       SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
 		if (cmdstatp->have_sense)
-			 __scsi_print_sense("st", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
+			 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
 	} ) /* end DEB */
 	if (!debugging) { /* Abnormal conditions for tape */
 		if (!cmdstatp->have_sense)
@@ -384,9 +384,8 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
 			 scode != VOLUME_OVERFLOW &&
 			 SRpnt->cmd[0] != MODE_SENSE &&
 			 SRpnt->cmd[0] != TEST_UNIT_READY) {
-				printk(KERN_WARNING "%s: Error with sense data: ", name);
-				__scsi_print_sense("st", SRpnt->sense,
-						   SCSI_SENSE_BUFFERSIZE);
+
+			__scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
 		}
 	}
 
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 2ebe0d66389..2f8073b73bf 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -517,7 +517,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd)
      */
 
     if (cmd->use_sg) {
-	cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+	cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
 	cmd->SCp.buffers_residual = cmd->use_sg - 1;
 	cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer);
 	cmd->SCp.this_residual = cmd->SCp.buffer->length;
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 1f328cae5c0..6b60536ac92 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -347,7 +347,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
 static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
 {
     int sz = sp->use_sg - 1;
-    struct scatterlist *sg = (struct scatterlist *)sp->buffer;
+    struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
                         
     while(sz >= 0) {
         dvma_unmap((char *)sg[sz].dma_address);
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 680f38ab60d..2083454db51 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -373,7 +373,7 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd,
  */
 
 	if (cmd->use_sg) {
-		cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+		cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
 		cmd->SCp.buffers_residual = cmd->use_sg - 1;
 		cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) +
 		    cmd->SCp.buffer->offset;