[POWERPC] Uartlite: Revert register io access changes

Reverts commit a15da8eff3627b8368db7f5dd260e5643213d918

This driver is used by devices other than the xilinx opb-uartlite which
depend on bytewise access to the registers.  The change to 32 bit access
does not work on these devices.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 18 insertions, 18 deletions

diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 2b8404c8116..dfef83f1496 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -75,7 +75,7 @@ static int ulite_receive(struct uart_port *port, int stat)
 	/* stats */
 	if (stat & ULITE_STATUS_RXVALID) {
 		port->icount.rx++;
-		ch = in_be32((void*)port->membase + ULITE_RX);
+		ch = readb(port->membase + ULITE_RX);
 
 		if (stat & ULITE_STATUS_PARITY)
 			port->icount.parity++;
@@ -120,7 +120,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
 		return 0;
 
 	if (port->x_char) {
-		out_be32((void*)port->membase + ULITE_TX, port->x_char);
+		writeb(port->x_char, port->membase + ULITE_TX);
 		port->x_char = 0;
 		port->icount.tx++;
 		return 1;
@@ -129,7 +129,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return 0;
 
-	out_be32((void*)port->membase + ULITE_TX, xmit->buf[xmit->tail]);
+	writeb(xmit->buf[xmit->tail], port->membase + ULITE_TX);
 	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
 	port->icount.tx++;
 
@@ -146,7 +146,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
 	int busy;
 
 	do {
-		int stat = in_be32((void*)port->membase + ULITE_STATUS);
+		int stat = readb(port->membase + ULITE_STATUS);
 		busy  = ulite_receive(port, stat);
 		busy |= ulite_transmit(port, stat);
 	} while (busy);
@@ -162,7 +162,7 @@ static unsigned int ulite_tx_empty(struct uart_port *port)
 	unsigned int ret;
 
 	spin_lock_irqsave(&port->lock, flags);
-	ret = in_be32((void*)port->membase + ULITE_STATUS);
+	ret = readb(port->membase + ULITE_STATUS);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
@@ -185,7 +185,7 @@ static void ulite_stop_tx(struct uart_port *port)
 
 static void ulite_start_tx(struct uart_port *port)
 {
-	ulite_transmit(port, in_be32((void*)port->membase + ULITE_STATUS));
+	ulite_transmit(port, readb(port->membase + ULITE_STATUS));
 }
 
 static void ulite_stop_rx(struct uart_port *port)
@@ -214,17 +214,17 @@ static int ulite_startup(struct uart_port *port)
 	if (ret)
 		return ret;
 
-	out_be32((void*)port->membase + ULITE_CONTROL,
-	         ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
-	out_be32((void*)port->membase + ULITE_CONTROL, ULITE_CONTROL_IE);
+	writeb(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
+	       port->membase + ULITE_CONTROL);
+	writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
 
 	return 0;
 }
 
 static void ulite_shutdown(struct uart_port *port)
 {
-	out_be32((void*)port->membase + ULITE_CONTROL, 0);
-	in_be32((void*)port->membase + ULITE_CONTROL); /* dummy */
+	writeb(0, port->membase + ULITE_CONTROL);
+	readb(port->membase + ULITE_CONTROL); /* dummy */
 	free_irq(port->irq, port);
 }
 
@@ -332,7 +332,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
 
 	/* wait up to 10ms for the character(s) to be sent */
 	for (i = 0; i < 10000; i++) {
-		if (in_be32((void*)port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
+		if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
 			break;
 		udelay(1);
 	}
@@ -341,7 +341,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
 static void ulite_console_putchar(struct uart_port *port, int ch)
 {
 	ulite_console_wait_tx(port);
-	out_be32((void*)port->membase + ULITE_TX, ch);
+	writeb(ch, port->membase + ULITE_TX);
 }
 
 static void ulite_console_write(struct console *co, const char *s,
@@ -358,8 +358,8 @@ static void ulite_console_write(struct console *co, const char *s,
 		spin_lock_irqsave(&port->lock, flags);
 
 	/* save and disable interrupt */
-	ier = in_be32((void*)port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
-	out_be32((void*)port->membase + ULITE_CONTROL, 0);
+	ier = readb(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
+	writeb(0, port->membase + ULITE_CONTROL);
 
 	uart_console_write(port, s, count, ulite_console_putchar);
 
@@ -367,7 +367,7 @@ static void ulite_console_write(struct console *co, const char *s,
 
 	/* restore interrupt state */
 	if (ier)
-		out_be32((void*)port->membase + ULITE_CONTROL, ULITE_CONTROL_IE);
+		writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
 
 	if (locked)
 		spin_unlock_irqrestore(&port->lock, flags);
@@ -598,7 +598,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
 
 	rc = of_address_to_resource(op->node, 0, &res);
 	if (rc) {
-		dev_err(&op->dev, "invalide address\n");
+		dev_err(&op->dev, "invalid address\n");
 		return rc;
 	}
 
@@ -606,7 +606,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
 
 	id = of_get_property(op->node, "port-number", NULL);
 
-	return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
+	return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq);
 }
 
 static int __devexit ulite_of_remove(struct of_device *op)