diff options
author | Alan Cox <alan@linux.intel.com> | 2009-08-27 11:03:09 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-09-15 12:02:29 -0700 |
commit | 15700039b108fccc36507bcabdd4dda93f7c4c61 (patch) | |
tree | 31629674e011fb606072d89b913aa169cc689fbc /drivers/staging/et131x/et131x_initpci.c | |
parent | bc7f9c597fa55814548845a7c43f53d6bbbce94b (diff) |
Staging: et131x: prune all the debug code
We don't need it, we have a perfectly good set of debug tools. For this pass
keep a few debug printks around which are "should not happen" items
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/et131x/et131x_initpci.c')
-rw-r--r-- | drivers/staging/et131x/et131x_initpci.c | 236 |
1 files changed, 44 insertions, 192 deletions
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 0662e7ff964..2d8b62f066a 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -58,7 +58,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/pci.h> @@ -113,33 +112,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_INFO); MODULE_LICENSE(DRIVER_LICENSE); -/* Module Parameters and related data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -static u32 et131x_debug_level = DBG_LVL; -static u32 et131x_debug_flags = DBG_DEFAULTS; - -/* -et131x_debug_level : - Level of debugging desired (0-7) - 7 : DBG_RX_ON | DBG_TX_ON - 6 : DBG_PARAM_ON - 5 : DBG_VERBOSE_ON - 4 : DBG_TRACE_ON - 3 : DBG_NOTICE_ON - 2 : no debug info - 1 : no debug info - 0 : no debug info -*/ - -module_param(et131x_debug_level, uint, 0); -module_param(et131x_debug_flags, uint, 0); - -MODULE_PARM_DESC(et131x_debug_level, "Level of debugging desired (0-7)"); - -static dbg_info_t et131x_info = { DRIVER_NAME_EXT, 0, 0 }; -dbg_info_t *et131x_dbginfo = &et131x_info; -#endif /* CONFIG_ET131X_DEBUG */ - /* Defines for Parameter Default/Min/Max vaules */ #define PARM_SPEED_DUPLEX_MIN 0 #define PARM_SPEED_DUPLEX_MAX 5 @@ -196,71 +168,29 @@ static struct pci_driver et131x_driver = { * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_init_module(void) +static int et131x_init_module(void) { - int result; - -#ifdef CONFIG_ET131X_DEBUG - /* Set the level of debug messages displayed using the module - * parameter - */ - et131x_dbginfo->dbgFlags = et131x_debug_flags; - - switch (et131x_debug_level) { - case 7: - et131x_dbginfo->dbgFlags |= (DBG_RX_ON | DBG_TX_ON); - - case 6: - et131x_dbginfo->dbgFlags |= DBG_PARAM_ON; - - case 5: - et131x_dbginfo->dbgFlags |= DBG_VERBOSE_ON; - - case 4: - et131x_dbginfo->dbgFlags |= DBG_TRACE_ON; - - case 3: - et131x_dbginfo->dbgFlags |= DBG_NOTICE_ON; - - case 2: - case 1: - case 0: - default: - break; - } -#endif /* CONFIG_ET131X_DEBUG */ - - DBG_ENTER(et131x_dbginfo); - DBG_PRINT("%s\n", DRIVER_INFO); - if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN || et131x_speed_set > PARM_SPEED_DUPLEX_MAX) { - printk(KERN_WARNING "et131x: invalid speed setting ignored.\n"); + printk(KERN_WARNING "et131x: invalid speed setting ignored.\n"); et131x_speed_set = 0; } - - result = pci_register_driver(&et131x_driver); - - DBG_LEAVE(et131x_dbginfo); - return result; + return pci_register_driver(&et131x_driver); } /** * et131x_cleanup_module - The entry point called on driver cleanup */ -void et131x_cleanup_module(void) +static void et131x_cleanup_module(void) { - DBG_ENTER(et131x_dbginfo); - pci_unregister_driver(&et131x_driver); - - DBG_LEAVE(et131x_dbginfo); } /* * These macros map the driver-specific init_module() and cleanup_module() * routines so they can be called by the kernel. */ + module_init(et131x_init_module); module_exit(et131x_cleanup_module); @@ -279,8 +209,6 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) uint8_t read_size_reg; u8 rev; - DBG_ENTER(et131x_dbginfo); - /* Allow disabling of Non-Maskable Interrupts in I/O space, to * support validation. */ @@ -311,9 +239,8 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eepromStat); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for " + dev_err(&pdev->dev, "Could not read PCI config space for " "EEPROM Status\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; } @@ -323,10 +250,9 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) if (eepromStat & 0x4C) { result = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, + dev_err(&pdev->dev, "Could not read PCI config space for " "Revision ID\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; } else if (rev == 0x01) { int32_t nLoop; @@ -341,8 +267,7 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) } } - DBG_ERROR(et131x_dbginfo, - "Fatal EEPROM Status Error - 0x%04x\n", eepromStat); + dev_err(&pdev->dev, "Fatal EEPROM Status Error - 0x%04x\n", eepromStat); /* This error could mean that there was an error reading the * eeprom or that the eeprom doesn't exist. We will treat @@ -351,14 +276,9 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) * MAC Address */ adapter->has_eeprom = 0; - - DBG_LEAVE(et131x_dbginfo); return -EIO; - } else { - DBG_TRACE(et131x_dbginfo, "EEPROM Status Code - 0x%04x\n", - eepromStat); + } else adapter->has_eeprom = 1; - } /* Read the EEPROM for information regarding LED behavior. Refer to * ET1310_phy.c, et131x_xcvr_init(), for its use. @@ -375,9 +295,8 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) */ result = pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &maxPayload); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for " - "Max Payload Size\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not read PCI config space for Max Payload Size\n"); return -EIO; } @@ -391,20 +310,16 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) result = pci_write_config_word(pdev, ET1310_PCI_ACK_NACK, AckNak[maxPayload]); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space " - "for ACK/NAK\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for ACK/NAK\n"); return -EIO; } result = pci_write_config_word(pdev, ET1310_PCI_REPLAY, Replay[maxPayload]); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space " - "for Replay Timer\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for Replay Timer\n"); return -EIO; } } @@ -414,19 +329,16 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) */ result = pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space for " - "Latency Timers\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for Latency Timers\n"); return -EIO; } /* Change the max read size to 2k */ result = pci_read_config_byte(pdev, 0x51, &read_size_reg); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, + dev_err(&pdev->dev, "Could not read PCI config space for Max read size\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; } @@ -435,9 +347,8 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) result = pci_write_config_byte(pdev, 0x51, read_size_reg); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, + dev_err(&pdev->dev, "Could not write PCI config space for Max read size\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; } @@ -452,15 +363,11 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) pdev, ET1310_PCI_MAC_ADDRESS + i, adapter->PermanentAddress + i); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not read PCI config space for MAC address\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, ";Could not read PCI config space for MAC address\n"); return -EIO; } } } - - DBG_LEAVE(et131x_dbginfo); return 0; } @@ -481,9 +388,8 @@ void et131x_error_timer_handler(unsigned long data) if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) UpdateMacStatHostCounters(etdev); else - DBG_VERBOSE(et131x_dbginfo, - "No interrupts, in PHY coma, pm_csr = 0x%x\n", - pm_csr); + dev_err(&etdev->pdev->dev, + "No interrupts, in PHY coma, pm_csr = 0x%x\n", pm_csr); if (!etdev->Bmsr.bits.link_status && etdev->RegistryPhyComa && @@ -541,8 +447,6 @@ void ConfigGlobalRegs(struct et131x_adapter *etdev) { struct _GLOBAL_t __iomem *regs = &etdev->regs->global; - DBG_ENTER(et131x_dbginfo); - if (etdev->RegistryPhyLoopbk == false) { if (etdev->RegistryJumboPacket < 2048) { /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word @@ -596,8 +500,6 @@ void ConfigGlobalRegs(struct et131x_adapter *etdev) * a packet is queued. */ writel(0, ®s->watchdog_timer); - - DBG_LEAVE(et131x_dbginfo); } @@ -611,8 +513,6 @@ int et131x_adapter_setup(struct et131x_adapter *etdev) { int status = 0; - DBG_ENTER(et131x_dbginfo); - /* Configure the JAGCore */ ConfigGlobalRegs(etdev); @@ -634,7 +534,7 @@ int et131x_adapter_setup(struct et131x_adapter *etdev) status = et131x_xcvr_find(etdev); if (status != 0) - DBG_WARNING(et131x_dbginfo, "Could not find the xcvr\n"); + dev_warn(&etdev->pdev->dev, "Could not find the xcvr\n"); /* Prepare the TRUEPHY library. */ ET1310_PhyInit(etdev); @@ -658,9 +558,7 @@ int et131x_adapter_setup(struct et131x_adapter *etdev) ET1310_PhyPowerDown(etdev, 0); et131x_setphy_normal(etdev); - - DBG_LEAVE(et131x_dbginfo); - return status; +; return status; } /** @@ -669,8 +567,6 @@ int et131x_adapter_setup(struct et131x_adapter *etdev) */ void et131x_setup_hardware_properties(struct et131x_adapter *adapter) { - DBG_ENTER(et131x_dbginfo); - /* If have our default mac from registry and no mac address from * EEPROM then we need to generate the last octet and set it on the * device @@ -702,8 +598,6 @@ void et131x_setup_hardware_properties(struct et131x_adapter *adapter) memcpy(adapter->CurrentAddress, adapter->PermanentAddress, ETH_ALEN); } - - DBG_LEAVE(et131x_dbginfo); } /** @@ -712,8 +606,6 @@ void et131x_setup_hardware_properties(struct et131x_adapter *adapter) */ void et131x_soft_reset(struct et131x_adapter *adapter) { - DBG_ENTER(et131x_dbginfo); - /* Disable MAC Core */ writel(0xc00f0000, &adapter->regs->mac.cfg1.value); @@ -721,8 +613,6 @@ void et131x_soft_reset(struct et131x_adapter *adapter) writel(0x7F, &adapter->regs->global.sw_reset); writel(0x000f0000, &adapter->regs->mac.cfg1.value); writel(0x00000000, &adapter->regs->mac.cfg1.value); - - DBG_LEAVE(et131x_dbginfo); } /** @@ -738,8 +628,6 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter, { uint64_t new_addr; - DBG_ENTER(et131x_dbginfo); - *offset = 0; new_addr = *phys_addr & ~mask; @@ -752,8 +640,6 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter, /* Return new physical address */ *phys_addr = new_addr; } - - DBG_LEAVE(et131x_dbginfo); } /** @@ -768,13 +654,11 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) { int status = 0; - DBG_ENTER(et131x_dbginfo); - do { /* Allocate memory for the Tx Ring */ status = et131x_tx_dma_memory_alloc(adapter); if (status != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "et131x_tx_dma_memory_alloc FAILED\n"); break; } @@ -782,7 +666,7 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) /* Receive buffer memory allocation */ status = et131x_rx_dma_memory_alloc(adapter); if (status != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "et131x_rx_dma_memory_alloc FAILED\n"); et131x_tx_dma_memory_free(adapter); break; @@ -791,14 +675,13 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) /* Init receive data structures */ status = et131x_init_recv(adapter); if (status != 0) { - DBG_ERROR(et131x_dbginfo, "et131x_init_recv FAILED\n"); + dev_err(&adapter->pdev->dev, + "et131x_init_recv FAILED\n"); et131x_tx_dma_memory_free(adapter); et131x_rx_dma_memory_free(adapter); break; } } while (0); - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -808,13 +691,9 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) */ void et131x_adapter_memory_free(struct et131x_adapter *adapter) { - DBG_ENTER(et131x_dbginfo); - /* Free DMA memory */ et131x_tx_dma_memory_free(adapter); et131x_rx_dma_memory_free(adapter); - - DBG_LEAVE(et131x_dbginfo); } /** @@ -830,8 +709,6 @@ void __devexit et131x_pci_remove(struct pci_dev *pdev) struct net_device *netdev; struct et131x_adapter *adapter; - DBG_ENTER(et131x_dbginfo); - /* Retrieve the net_device pointer from the pci_dev struct, as well * as the private adapter struct */ @@ -846,8 +723,6 @@ void __devexit et131x_pci_remove(struct pci_dev *pdev) free_netdev(netdev); pci_release_regions(pdev); pci_disable_device(pdev); - - DBG_LEAVE(et131x_dbginfo); } /** @@ -866,11 +741,9 @@ void et131x_config_parse(struct et131x_adapter *etdev) static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 }; static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 }; - DBG_ENTER(et131x_dbginfo); - if (et131x_speed_set) - DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", - et131x_speed_set); + dev_info(&etdev->pdev->dev, + "Speed set manually to : %d \n", et131x_speed_set); etdev->SpeedDuplex = et131x_speed_set; etdev->RegistryJumboPacket = 1514; /* 1514-9216 */ @@ -894,8 +767,6 @@ void et131x_config_parse(struct et131x_adapter *etdev) etdev->AiForceSpeed = speed[etdev->SpeedDuplex]; etdev->AiForceDpx = duplex[etdev->SpeedDuplex]; /* Auto FDX */ - - DBG_LEAVE(et131x_dbginfo); } @@ -920,18 +791,17 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, struct net_device *netdev = NULL; struct et131x_adapter *adapter = NULL; - DBG_ENTER(et131x_dbginfo); - /* Enable the device via the PCI subsystem */ result = pci_enable_device(pdev); if (result != 0) { - DBG_ERROR(et131x_dbginfo, "pci_enable_device() failed\n"); + dev_err(&adapter->pdev->dev, + "pci_enable_device() failed\n"); goto out; } /* Perform some basic PCI checks */ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Can't find PCI device's base address\n"); result = -ENODEV; goto out; @@ -939,12 +809,12 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, result = pci_request_regions(pdev, DRIVER_NAME); if (result != 0) { - DBG_ERROR(et131x_dbginfo, "Can't get PCI resources\n"); + dev_err(&adapter->pdev->dev, + "Can't get PCI resources\n"); goto err_disable; } /* Enable PCI bus mastering */ - DBG_TRACE(et131x_dbginfo, "Setting PCI Bus Mastering...\n"); pci_set_master(pdev); /* Query PCI for Power Mgmt Capabilities @@ -954,7 +824,7 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, */ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (pm_cap == 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Cannot find Power Management capabilities\n"); result = -EIO; goto err_release_res; @@ -962,40 +832,34 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, /* Check the DMA addressing support of this device */ if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { - DBG_TRACE(et131x_dbginfo, "64-bit DMA addressing supported\n"); pci_using_dac = true; result = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); if (result != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&pdev->dev, "Unable to obtain 64 bit DMA for consistent allocations\n"); goto err_release_res; } } else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) { - DBG_TRACE(et131x_dbginfo, - "64-bit DMA addressing NOT supported\n"); - DBG_TRACE(et131x_dbginfo, - "32-bit DMA addressing will be used\n"); pci_using_dac = false; } else { - DBG_ERROR(et131x_dbginfo, "No usable DMA addressing method\n"); + dev_err(&adapter->pdev->dev, + "No usable DMA addressing method\n"); result = -EIO; goto err_release_res; } /* Allocate netdev and private adapter structs */ - DBG_TRACE(et131x_dbginfo, - "Allocate netdev and private adapter structs...\n"); netdev = et131x_device_alloc(); if (netdev == NULL) { - DBG_ERROR(et131x_dbginfo, "Couldn't alloc netdev struct\n"); + dev_err(&adapter->pdev->dev, + "Couldn't alloc netdev struct\n"); result = -ENOMEM; goto err_release_res; } /* Setup the fundamental net_device and private adapter structure elements */ - DBG_TRACE(et131x_dbginfo, "Setting fundamental net_device info...\n"); SET_NETDEV_DEV(netdev, &pdev->dev); /* if (pci_using_dac) { @@ -1036,8 +900,6 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, netdev->base_addr = pdev->resource[0].start; /* Initialize spinlocks here */ - DBG_TRACE(et131x_dbginfo, "Initialize spinlocks...\n"); - spin_lock_init(&adapter->Lock); spin_lock_init(&adapter->TCBSendQLock); spin_lock_init(&adapter->TCBReadyQLock); @@ -1061,13 +923,11 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, et131x_find_adapter(adapter, pdev); /* Map the bus-relative registers to system virtual memory */ - DBG_TRACE(et131x_dbginfo, - "Mapping bus-relative registers to virtual memory...\n"); adapter->regs = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); if (adapter->regs == NULL) { - DBG_ERROR(et131x_dbginfo, "Cannot map device registers\n"); + dev_err(&pdev->dev, "Cannot map device registers\n"); result = -ENOMEM; goto err_free_dev; } @@ -1078,23 +938,19 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr); /* Issue a global reset to the et1310 */ - DBG_TRACE(et131x_dbginfo, "Issuing soft reset...\n"); et131x_soft_reset(adapter); /* Disable all interrupts (paranoid) */ - DBG_TRACE(et131x_dbginfo, "Disable device interrupts...\n"); et131x_disable_interrupts(adapter); /* Allocate DMA memory */ result = et131x_adapter_memory_alloc(adapter); if (result != 0) { - DBG_ERROR(et131x_dbginfo, - "Could not alloc adapater memory (DMA)\n"); + dev_err(&pdev->dev, "Could not alloc adapater memory (DMA)\n"); goto err_iounmap; } /* Init send data structures */ - DBG_TRACE(et131x_dbginfo, "Init send data structures...\n"); et131x_init_send(adapter); /* Register the interrupt @@ -1109,13 +965,11 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, INIT_WORK(&adapter->task, et131x_isr_handler); /* Determine MAC Address, and copy into the net_device struct */ - DBG_TRACE(et131x_dbginfo, "Retrieve MAC address...\n"); et131x_setup_hardware_properties(adapter); memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN); /* Setup et1310 as per the documentation */ - DBG_TRACE(et131x_dbginfo, "Setup the adapter...\n"); et131x_adapter_setup(adapter); /* Create a timer to count errors received by the NIC */ @@ -1140,10 +994,9 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, */ /* Register the net_device struct with the Linux network layer */ - DBG_TRACE(et131x_dbginfo, "Registering net_device...\n"); result = register_netdev(netdev); if (result != 0) { - DBG_ERROR(et131x_dbginfo, "register_netdev() failed\n"); + dev_err(&pdev->dev, "register_netdev() failed\n"); goto err_mem_free; } @@ -1156,7 +1009,6 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, pci_save_state(adapter->pdev); out: - DBG_LEAVE(et131x_dbginfo); return result; err_mem_free: |