Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/wireless/iwlwifi/iwl-4965-rs.c
	drivers/net/wireless/rt2x00/rt61pci.c

5 files changed, 388 insertions, 473 deletions

diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index ce337cb5d13..f261d2a9a5f 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3251,7 +3251,7 @@ static int udc_pci_probe(
 	/* pci setup */
 	if (pci_enable_device(pdev) < 0) {
 		kfree(dev);
-		dev = 0;
+		dev = NULL;
 		retval = -ENODEV;
 		goto finished;
 	}
@@ -3264,7 +3264,7 @@ static int udc_pci_probe(
 	if (!request_mem_region(resource, len, name)) {
 		dev_dbg(&pdev->dev, "pci device used already\n");
 		kfree(dev);
-		dev = 0;
+		dev = NULL;
 		retval = -EBUSY;
 		goto finished;
 	}
@@ -3274,7 +3274,7 @@ static int udc_pci_probe(
 	if (dev->virt_addr == NULL) {
 		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
 		kfree(dev);
-		dev = 0;
+		dev = NULL;
 		retval = -EFAULT;
 		goto finished;
 	}
@@ -3282,7 +3282,7 @@ static int udc_pci_probe(
 	if (!pdev->irq) {
 		dev_err(&dev->pdev->dev, "irq not set\n");
 		kfree(dev);
-		dev = 0;
+		dev = NULL;
 		retval = -ENODEV;
 		goto finished;
 	}
@@ -3290,7 +3290,7 @@ static int udc_pci_probe(
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
 		kfree(dev);
-		dev = 0;
+		dev = NULL;
 		retval = -EBUSY;
 		goto finished;
 	}
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e756023362c..07e5a0b5dcd 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -649,7 +649,13 @@ static int usba_ep_disable(struct usb_ep *_ep)
 
 	if (!ep->desc) {
 		spin_unlock_irqrestore(&udc->lock, flags);
-		DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
+		/* REVISIT because this driver disables endpoints in
+		 * reset_all_endpoints() before calling disconnect(),
+		 * most gadget drivers would trigger this non-error ...
+		 */
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN)
+			DBG(DBG_ERR, "ep_disable: %s not enabled\n",
+					ep->ep.name);
 		return -EINVAL;
 	}
 	ep->desc = NULL;
@@ -1032,8 +1038,6 @@ static struct usba_udc the_udc = {
 			.release	= nop_release,
 		},
 	},
-
-	.lock	= SPIN_LOCK_UNLOCKED,
 };
 
 /*
@@ -1052,6 +1056,12 @@ static void reset_all_endpoints(struct usba_udc *udc)
 		request_complete(ep, req, -ECONNRESET);
 	}
 
+	/* NOTE:  normally, the next call to the gadget driver is in
+	 * charge of disabling endpoints... usually disconnect().
+	 * The exception would be entering a high speed test mode.
+	 *
+	 * FIXME remove this code ... and retest thoroughly.
+	 */
 	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
 		if (ep->desc) {
 			spin_unlock(&udc->lock);
@@ -1219,7 +1229,7 @@ static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
 static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 		struct usb_ctrlrequest *crq)
 {
-	int retval = 0;;
+	int retval = 0;
 
 	switch (crq->bRequest) {
 	case USB_REQ_GET_STATUS: {
@@ -1693,6 +1703,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 		usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
 		reset_all_endpoints(udc);
 
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN
+				&& udc->driver->disconnect) {
+			udc->gadget.speed = USB_SPEED_UNKNOWN;
+			spin_unlock(&udc->lock);
+			udc->driver->disconnect(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+
 		if (status & USBA_HIGH_SPEED) {
 			DBG(DBG_BUS, "High-speed bus reset detected\n");
 			udc->gadget.speed = USB_SPEED_HIGH;
@@ -1716,9 +1734,13 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 				| USBA_DET_SUSPEND
 				| USBA_END_OF_RESUME));
 
+		/*
+		 * Unclear why we hit this irregularly, e.g. in usbtest,
+		 * but it's clearly harmless...
+		 */
 		if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
-			dev_warn(&udc->pdev->dev,
-				 "WARNING: EP0 configuration is invalid!\n");
+			dev_dbg(&udc->pdev->dev,
+				 "ODD: EP0 configuration is invalid!\n");
 	}
 
 	spin_unlock(&udc->lock);
@@ -1751,9 +1773,11 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 			reset_all_endpoints(udc);
 			toggle_bias(0);
 			usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-			spin_unlock(&udc->lock);
-			udc->driver->disconnect(&udc->gadget);
-			spin_lock(&udc->lock);
+			if (udc->driver->disconnect) {
+				spin_unlock(&udc->lock);
+				udc->driver->disconnect(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
 		}
 		udc->vbus_prev = vbus;
 	}
@@ -1825,7 +1849,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	if (!udc->pdev)
 		return -ENODEV;
-	if (driver != udc->driver)
+	if (driver != udc->driver || !driver->unbind)
 		return -EINVAL;
 
 	if (udc->vbus_pin != -1)
@@ -1840,6 +1864,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 
+	if (udc->driver->disconnect)
+		udc->driver->disconnect(&udc->gadget);
+
 	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
@@ -1879,6 +1906,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 		goto err_get_hclk;
 	}
 
+	spin_lock_init(&udc->lock);
 	udc->pdev = pdev;
 	udc->pclk = pclk;
 	udc->hclk = hclk;
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 75eba202f73..499b7a23f35 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1546,7 +1546,6 @@ static __init void udc_init_data(struct pxa_udc *dev)
 	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
 	dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
 	ep0_idle(dev);
-	strcpy(dev->dev->bus_id, "");
 
 	/* PXA endpoints init */
 	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
@@ -1746,13 +1745,10 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
 		ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i);
 	}
 
-	le16_to_cpus(&u.r.wValue);
-	le16_to_cpus(&u.r.wIndex);
-	le16_to_cpus(&u.r.wLength);
-
 	ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n",
 		u.r.bRequestType, u.r.bRequest,
-		u.r.wValue, u.r.wIndex, u.r.wLength);
+		le16_to_cpu(u.r.wValue), le16_to_cpu(u.r.wIndex),
+		le16_to_cpu(u.r.wLength));
 	if (unlikely(have_extrabytes))
 		goto stall;
 
@@ -2296,7 +2292,8 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
 {
 	struct pxa_udc *udc = platform_get_drvdata(_dev);
 
-	udc_disable(udc);
+	if (udc_readl(udc, UDCCR) & UDCCR_UDE)
+		udc_disable(udc);
 }
 
 #ifdef CONFIG_PM
@@ -2361,9 +2358,8 @@ static int pxa_udc_resume(struct platform_device *_dev)
 	 * Upon exit from sleep mode and before clearing OTGPH,
 	 * Software must configure the USB OTG pad, UDC, and UHC
 	 * to the state they were in before entering sleep mode.
-	 *
-	 * Should be : PSSR |= PSSR_OTGPH;
 	 */
+	PSSR |= PSSR_OTGPH;
 
 	return 0;
 }
@@ -2387,6 +2383,9 @@ static struct platform_driver udc_driver = {
 
 static int __init udc_init(void)
 {
+	if (!cpu_is_pxa27x())
+		return -ENODEV;
+
 	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
 	return platform_driver_probe(&udc_driver, pxa_udc_probe);
 }
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 1d1b7936ee1..97453db924f 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -484,4 +484,12 @@ static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
 #define ep_warn(ep, fmt, arg...) \
 	dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
 
+/*
+ * Cannot include pxa-regs.h, as register names are similar.
+ * So PSSR is redefined here. This should be removed once UDC registers will
+ * be gone from pxa-regs.h.
+ */
+#define PSSR		__REG(0x40F00004)	/* Power Manager Sleep Status */
+#define PSSR_OTGPH	(1 << 6)		/* OTG Peripheral Hold */
+
 #endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 54cdd6f9403..fa019fa7333 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -14,7 +14,6 @@
  * This software is distributed under the terms of the GNU General
  * Public License ("GPL") as published by the Free Software Foundation,
  * either version 2 of that License or (at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
@@ -33,7 +32,7 @@
 /* Defines */
 
 #define GS_VERSION_STR			"v2.2"
-#define GS_VERSION_NUM			0x0202
+#define GS_VERSION_NUM			0x2200
 
 #define GS_LONG_NAME			"Gadget Serial"
 #define GS_SHORT_NAME			"g_serial"
@@ -41,7 +40,11 @@
 #define GS_MAJOR			127
 #define GS_MINOR_START			0
 
-#define GS_NUM_PORTS			16
+/* REVISIT only one port is supported for now;
+ * see gs_{send,recv}_packet() ... no multiplexing,
+ * and no support for multiple ACM devices.
+ */
+#define GS_NUM_PORTS			1
 
 #define GS_NUM_CONFIGS			1
 #define GS_NO_CONFIG_ID			0
@@ -65,6 +68,9 @@
 
 #define GS_DEFAULT_USE_ACM		0
 
+/* 9600-8-N-1 ... matches init_termios.c_cflag and defaults
+ * expected by "usbser.sys" on MS-Windows.
+ */
 #define GS_DEFAULT_DTE_RATE		9600
 #define GS_DEFAULT_DATA_BITS		8
 #define GS_DEFAULT_PARITY		USB_CDC_NO_PARITY
@@ -107,10 +113,6 @@ static int debug = 1;
 #define GS_NOTIFY_MAXPACKET		8
 
 
-/* Structures */
-
-struct gs_dev;
-
 /* circular buffer */
 struct gs_buf {
 	unsigned int		buf_size;
@@ -119,12 +121,6 @@ struct gs_buf {
 	char			*buf_put;
 };
 
-/* list of requests */
-struct gs_req_entry {
-	struct list_head	re_entry;
-	struct usb_request	*re_req;
-};
-
 /* the port structure holds info for each port, one for each minor number */
 struct gs_port {
 	struct gs_dev		*port_dev;	/* pointer to device struct */
@@ -164,26 +160,7 @@ struct gs_dev {
 
 /* Functions */
 
-/* module */
-static int __init gs_module_init(void);
-static void __exit gs_module_exit(void);
-
-/* tty driver */
-static int gs_open(struct tty_struct *tty, struct file *file);
-static void gs_close(struct tty_struct *tty, struct file *file);
-static int gs_write(struct tty_struct *tty,
-	const unsigned char *buf, int count);
-static int gs_put_char(struct tty_struct *tty, unsigned char ch);
-static void gs_flush_chars(struct tty_struct *tty);
-static int gs_write_room(struct tty_struct *tty);
-static int gs_chars_in_buffer(struct tty_struct *tty);
-static void gs_throttle(struct tty_struct * tty);
-static void gs_unthrottle(struct tty_struct * tty);
-static void gs_break(struct tty_struct *tty, int break_state);
-static int  gs_ioctl(struct tty_struct *tty, struct file *file,
-	unsigned int cmd, unsigned long arg);
-static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
-
+/* tty driver internals */
 static int gs_send(struct gs_dev *dev);
 static int gs_send_packet(struct gs_dev *dev, char *packet,
 	unsigned int size);
@@ -192,19 +169,7 @@ static int gs_recv_packet(struct gs_dev *dev, char *packet,
 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
 
-/* gadget driver */
-static int gs_bind(struct usb_gadget *gadget);
-static void gs_unbind(struct usb_gadget *gadget);
-static int gs_setup(struct usb_gadget *gadget,
-	const struct usb_ctrlrequest *ctrl);
-static int gs_setup_standard(struct usb_gadget *gadget,
-	const struct usb_ctrlrequest *ctrl);
-static int gs_setup_class(struct usb_gadget *gadget,
-	const struct usb_ctrlrequest *ctrl);
-static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
-static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
-	struct usb_request *req);
-static void gs_disconnect(struct usb_gadget *gadget);
+/* gadget driver internals */
 static int gs_set_config(struct gs_dev *dev, unsigned config);
 static void gs_reset_config(struct gs_dev *dev);
 static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
@@ -214,10 +179,6 @@ static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
 	gfp_t kmalloc_flags);
 static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
 
-static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
-	gfp_t kmalloc_flags);
-static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
-
 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
 static void gs_free_ports(struct gs_dev *dev);
 
@@ -232,62 +193,15 @@ static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
 static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
 	unsigned int count);
 
-/* external functions */
-extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
-
 
 /* Globals */
 
 static struct gs_dev *gs_device;
 
-static const char *EP_IN_NAME;
-static const char *EP_OUT_NAME;
-static const char *EP_NOTIFY_NAME;
-
 static struct mutex gs_open_close_lock[GS_NUM_PORTS];
 
-static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
-static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
-
-static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
-
-static unsigned int use_acm = GS_DEFAULT_USE_ACM;
-
-
-/* tty driver struct */
-static const struct tty_operations gs_tty_ops = {
-	.open =			gs_open,
-	.close =		gs_close,
-	.write =		gs_write,
-	.put_char =		gs_put_char,
-	.flush_chars =		gs_flush_chars,
-	.write_room =		gs_write_room,
-	.ioctl =		gs_ioctl,
-	.set_termios =		gs_set_termios,
-	.throttle =		gs_throttle,
-	.unthrottle =		gs_unthrottle,
-	.break_ctl =		gs_break,
-	.chars_in_buffer =	gs_chars_in_buffer,
-};
-static struct tty_driver *gs_tty_driver;
-
-/* gadget driver struct */
-static struct usb_gadget_driver gs_gadget_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	.speed =		USB_SPEED_HIGH,
-#else
-	.speed =		USB_SPEED_FULL,
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
-	.function =		GS_LONG_NAME,
-	.bind =			gs_bind,
-	.unbind =		gs_unbind,
-	.setup =		gs_setup,
-	.disconnect =		gs_disconnect,
-	.driver = {
-		.name =		GS_SHORT_NAME,
-	},
-};
 
+/*-------------------------------------------------------------------------*/
 
 /* USB descriptors */
 
@@ -304,7 +218,6 @@ static char manufacturer[50];
 static struct usb_string gs_strings[] = {
 	{ GS_MANUFACTURER_STR_ID, manufacturer },
 	{ GS_PRODUCT_STR_ID, GS_LONG_NAME },
-	{ GS_SERIAL_STR_ID, "0" },
 	{ GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
 	{ GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
 	{ GS_CONTROL_STR_ID, "Gadget Serial Control" },
@@ -327,7 +240,6 @@ static struct usb_device_descriptor gs_device_desc = {
 	.idProduct =		__constant_cpu_to_le16(GS_PRODUCT_ID),
 	.iManufacturer =	GS_MANUFACTURER_STR_ID,
 	.iProduct =		GS_PRODUCT_STR_ID,
-	.iSerialNumber =	GS_SERIAL_STR_ID,
 	.bNumConfigurations =	GS_NUM_CONFIGS,
 };
 
@@ -364,7 +276,7 @@ static const struct usb_interface_descriptor gs_bulk_interface_desc = {
 	.bDescriptorType =	USB_DT_INTERFACE,
 	.bInterfaceNumber =	GS_BULK_INTERFACE_ID,
 	.bNumEndpoints =	2,
-	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
 	.bInterfaceSubClass =	0,
 	.bInterfaceProtocol =	0,
 	.iInterface =		GS_DATA_STR_ID,
@@ -521,6 +433,8 @@ static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
 };
 
 
+/*-------------------------------------------------------------------------*/
+
 /* Module */
 MODULE_DESCRIPTION(GS_LONG_NAME);
 MODULE_AUTHOR("Al Borchers");
@@ -531,84 +445,23 @@ module_param(debug, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
 #endif
 
+static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
 module_param(read_q_size, uint, S_IRUGO);
 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
 
+static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
 module_param(write_q_size, uint, S_IRUGO);
 MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
 
+static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
 module_param(write_buf_size, uint, S_IRUGO);
 MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
 
+static unsigned int use_acm = GS_DEFAULT_USE_ACM;
 module_param(use_acm, uint, S_IRUGO);
 MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
 
-module_init(gs_module_init);
-module_exit(gs_module_exit);
-
-/*
-*  gs_module_init
-*
-*  Register as a USB gadget driver and a tty driver.
-*/
-static int __init gs_module_init(void)
-{
-	int i;
-	int retval;
-
-	retval = usb_gadget_register_driver(&gs_gadget_driver);
-	if (retval) {
-		pr_err("gs_module_init: cannot register gadget driver, "
-			"ret=%d\n", retval);
-		return retval;
-	}
-
-	gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
-	if (!gs_tty_driver)
-		return -ENOMEM;
-	gs_tty_driver->owner = THIS_MODULE;
-	gs_tty_driver->driver_name = GS_SHORT_NAME;
-	gs_tty_driver->name = "ttygs";
-	gs_tty_driver->major = GS_MAJOR;
-	gs_tty_driver->minor_start = GS_MINOR_START;
-	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
-	gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	gs_tty_driver->init_termios = tty_std_termios;
-	gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	tty_set_operations(gs_tty_driver, &gs_tty_ops);
-
-	for (i=0; i < GS_NUM_PORTS; i++)
-		mutex_init(&gs_open_close_lock[i]);
-
-	retval = tty_register_driver(gs_tty_driver);
-	if (retval) {
-		usb_gadget_unregister_driver(&gs_gadget_driver);
-		put_tty_driver(gs_tty_driver);
-		pr_err("gs_module_init: cannot register tty driver, "
-				"ret=%d\n", retval);
-		return retval;
-	}
-
-	pr_info("gs_module_init: %s %s loaded\n",
-			GS_LONG_NAME, GS_VERSION_STR);
-	return 0;
-}
-
-/*
-* gs_module_exit
-*
-* Unregister as a tty driver and a USB gadget driver.
-*/
-static void __exit gs_module_exit(void)
-{
-	tty_unregister_driver(gs_tty_driver);
-	put_tty_driver(gs_tty_driver);
-	usb_gadget_unregister_driver(&gs_gadget_driver);
-
-	pr_info("gs_module_exit: %s %s unloaded\n",
-			GS_LONG_NAME, GS_VERSION_STR);
-}
+/*-------------------------------------------------------------------------*/
 
 /* TTY Driver */
 
@@ -753,15 +606,15 @@ exit_unlock_dev:
  * gs_close
  */
 
-#define GS_WRITE_FINISHED_EVENT_SAFELY(p)			\
-({								\
-	int cond;						\
-								\
-	spin_lock_irq(&(p)->port_lock);				\
-	cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \
-	spin_unlock_irq(&(p)->port_lock);			\
-	cond;							\
-})
+static int gs_write_finished_event_safely(struct gs_port *p)
+{
+	int cond;
+
+	spin_lock_irq(&(p)->port_lock);
+	cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf);
+	spin_unlock_irq(&(p)->port_lock);
+	return cond;
+}
 
 static void gs_close(struct tty_struct *tty, struct file *file)
 {
@@ -807,7 +660,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	if (gs_buf_data_avail(port->port_write_buf) > 0) {
 		spin_unlock_irq(&port->port_lock);
 		wait_event_interruptible_timeout(port->port_write_wait,
-					GS_WRITE_FINISHED_EVENT_SAFELY(port),
+					gs_write_finished_event_safely(port),
 					GS_CLOSE_TIMEOUT * HZ);
 		spin_lock_irq(&port->port_lock);
 	}
@@ -1065,6 +918,23 @@ static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
 }
 
+static const struct tty_operations gs_tty_ops = {
+	.open =			gs_open,
+	.close =		gs_close,
+	.write =		gs_write,
+	.put_char =		gs_put_char,
+	.flush_chars =		gs_flush_chars,
+	.write_room =		gs_write_room,
+	.ioctl =		gs_ioctl,
+	.set_termios =		gs_set_termios,
+	.throttle =		gs_throttle,
+	.unthrottle =		gs_unthrottle,
+	.break_ctl =		gs_break,
+	.chars_in_buffer =	gs_chars_in_buffer,
+};
+
+/*-------------------------------------------------------------------------*/
+
 /*
 * gs_send
 *
@@ -1080,7 +950,6 @@ static int gs_send(struct gs_dev *dev)
 	unsigned long flags;
 	struct usb_ep *ep;
 	struct usb_request *req;
-	struct gs_req_entry *req_entry;
 
 	if (dev == NULL) {
 		pr_err("gs_send: NULL device pointer\n");
@@ -1093,10 +962,8 @@ static int gs_send(struct gs_dev *dev)
 
 	while(!list_empty(&dev->dev_req_list)) {
 
-		req_entry = list_entry(dev->dev_req_list.next,
-			struct gs_req_entry, re_entry);
-
-		req = req_entry->re_req;
+		req = list_entry(dev->dev_req_list.next,
+				struct usb_request, list);
 
 		len = gs_send_packet(dev, req->buf, ep->maxpacket);
 
@@ -1106,7 +973,7 @@ static int gs_send(struct gs_dev *dev)
 					*((unsigned char *)req->buf),
 					*((unsigned char *)req->buf+1),
 					*((unsigned char *)req->buf+2));
-			list_del(&req_entry->re_entry);
+			list_del(&req->list);
 			req->length = len;
 			spin_unlock_irqrestore(&dev->dev_lock, flags);
 			if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
@@ -1289,7 +1156,6 @@ requeue:
 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 {
 	struct gs_dev *dev = ep->driver_data;
-	struct gs_req_entry *gs_req = req->context;
 
 	if (dev == NULL) {
 		pr_err("gs_write_complete: NULL device pointer\n");
@@ -1300,13 +1166,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 	case 0:
 		/* normal completion */
 requeue:
-		if (gs_req == NULL) {
-			pr_err("gs_write_complete: NULL request pointer\n");
-			return;
-		}
-
 		spin_lock(&dev->dev_lock);
-		list_add(&gs_req->re_entry, &dev->dev_req_list);
+		list_add(&req->list, &dev->dev_req_list);
 		spin_unlock(&dev->dev_lock);
 
 		gs_send(dev);
@@ -1328,9 +1189,39 @@ requeue:
 	}
 }
 
+/*-------------------------------------------------------------------------*/
+
 /* Gadget Driver */
 
 /*
+ * gs_unbind
+ *
+ * Called on module unload.  Frees the control request and device
+ * structure.
+ */
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
+{
+	struct gs_dev *dev = get_gadget_data(gadget);
+
+	gs_device = NULL;
+
+	/* read/write requests already freed, only control request remains */
+	if (dev != NULL) {
+		if (dev->dev_ctrl_req != NULL) {
+			gs_free_req(gadget->ep0, dev->dev_ctrl_req);
+			dev->dev_ctrl_req = NULL;
+		}
+		gs_reset_config(dev);
+		gs_free_ports(dev);
+		kfree(dev);
+		set_gadget_data(gadget, NULL);
+	}
+
+	pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME,
+		GS_VERSION_STR);
+}
+
+/*
  * gs_bind
  *
  * Called on module load.  Allocates and initializes the device
@@ -1362,19 +1253,23 @@ static int __init gs_bind(struct usb_gadget *gadget)
 			__constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
 	}
 
+	dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
+	if (dev == NULL)
+		return -ENOMEM;
+
 	usb_ep_autoconfig_reset(gadget);
 
 	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
 	if (!ep)
 		goto autoconf_fail;
-	EP_IN_NAME = ep->name;
-	ep->driver_data = ep;	/* claim the endpoint */
+	dev->dev_in_ep = ep;
+	ep->driver_data = dev;	/* claim the endpoint */
 
 	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
 	if (!ep)
 		goto autoconf_fail;
-	EP_OUT_NAME = ep->name;
-	ep->driver_data = ep;	/* claim the endpoint */
+	dev->dev_out_ep = ep;
+	ep->driver_data = dev;	/* claim the endpoint */
 
 	if (use_acm) {
 		ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
@@ -1384,8 +1279,8 @@ static int __init gs_bind(struct usb_gadget *gadget)
 		}
 		gs_device_desc.idProduct = __constant_cpu_to_le16(
 						GS_CDC_PRODUCT_ID),
-		EP_NOTIFY_NAME = ep->name;
-		ep->driver_data = ep;	/* claim the endpoint */
+		dev->dev_notify_ep = ep;
+		ep->driver_data = dev;	/* claim the endpoint */
 	}
 
 	gs_device_desc.bDeviceClass = use_acm
@@ -1415,9 +1310,7 @@ static int __init gs_bind(struct usb_gadget *gadget)
 		gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	gs_device = dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
-	if (dev == NULL)
-		return -ENOMEM;
+	gs_device = dev;
 
 	snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
@@ -1441,8 +1334,6 @@ static int __init gs_bind(struct usb_gadget *gadget)
 		gs_unbind(gadget);
 		return -ENOMEM;
 	}
-	dev->dev_ctrl_req->complete = gs_setup_complete;
-
 	gadget->ep0->driver_data = dev;
 
 	pr_info("gs_bind: %s %s bound\n",
@@ -1451,99 +1342,11 @@ static int __init gs_bind(struct usb_gadget *gadget)
 	return 0;
 
 autoconf_fail:
+	kfree(dev);
 	pr_err("gs_bind: cannot autoconfigure on %s\n", gadget->name);
 	return -ENODEV;
 }
 
-/*
- * gs_unbind
- *
- * Called on module unload.  Frees the control request and device
- * structure.
- */
-static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
-{
-	struct gs_dev *dev = get_gadget_data(gadget);
-
-	gs_device = NULL;
-
-	/* read/write requests already freed, only control request remains */
-	if (dev != NULL) {
-		if (dev->dev_ctrl_req != NULL) {
-			gs_free_req(gadget->ep0, dev->dev_ctrl_req);
-			dev->dev_ctrl_req = NULL;
-		}
-		gs_free_ports(dev);
-		if (dev->dev_notify_ep)
-			usb_ep_disable(dev->dev_notify_ep);
-		if (dev->dev_in_ep)
-			usb_ep_disable(dev->dev_in_ep);
-		if (dev->dev_out_ep)
-			usb_ep_disable(dev->dev_out_ep);
-		kfree(dev);
-		set_gadget_data(gadget, NULL);
-	}
-
-	pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME,
-		GS_VERSION_STR);
-}
-
-/*
- * gs_setup
- *
- * Implements all the control endpoint functionality that's not
- * handled in hardware or the hardware driver.
- *
- * Returns the size of the data sent to the host, or a negative
- * error number.
- */
-static int gs_setup(struct usb_gadget *gadget,
-	const struct usb_ctrlrequest *ctrl)
-{
-	int ret = -EOPNOTSUPP;
-	struct gs_dev *dev = get_gadget_data(gadget);
-	struct usb_request *req = dev->dev_ctrl_req;
-	u16 wIndex = le16_to_cpu(ctrl->wIndex);
-	u16 wValue = le16_to_cpu(ctrl->wValue);
-	u16 wLength = le16_to_cpu(ctrl->wLength);
-
-	req->complete = gs_setup_complete;
-
-	switch (ctrl->bRequestType & USB_TYPE_MASK) {
-	case USB_TYPE_STANDARD:
-		ret = gs_setup_standard(gadget,ctrl);
-		break;
-
-	case USB_TYPE_CLASS:
-		ret = gs_setup_class(gadget,ctrl);
-		break;
-
-	default:
-		pr_err("gs_setup: unknown request, type=%02x, request=%02x, "
-			"value=%04x, index=%04x, length=%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			wValue, wIndex, wLength);
-		break;
-	}
-
-	/* respond with data transfer before status phase? */
-	if (ret >= 0) {
-		req->length = ret;
-		req->zero = ret < wLength
-				&& (ret % gadget->ep0->maxpacket) == 0;
-		ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
-		if (ret < 0) {
-			pr_err("gs_setup: cannot queue response, ret=%d\n",
-				ret);
-			req->status = 0;
-			gs_setup_complete(gadget->ep0, req);
-		}
-	}
-
-	/* device either stalls (ret < 0) or reports success */
-	return ret;
-}
-
 static int gs_setup_standard(struct usb_gadget *gadget,
 	const struct usb_ctrlrequest *ctrl)
 {
@@ -1673,6 +1476,42 @@ set_interface_done:
 	return ret;
 }
 
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	struct gs_dev *dev = ep->driver_data;
+	struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+	switch (req->status) {
+	case 0:
+		/* normal completion */
+		if (req->actual != sizeof(port->port_line_coding))
+			usb_ep_set_halt(ep);
+		else if (port) {
+			struct usb_cdc_line_coding	*value = req->buf;
+
+			/* REVISIT:  we currently just remember this data.
+			 * If we change that, (a) validate it first, then
+			 * (b) update whatever hardware needs updating.
+			 */
+			spin_lock(&port->port_lock);
+			port->port_line_coding = *value;
+			spin_unlock(&port->port_lock);
+		}
+		break;
+
+	case -ESHUTDOWN:
+		/* disconnect */
+		gs_free_req(ep, req);
+		break;
+
+	default:
+		/* unexpected */
+		break;
+	}
+	return;
+}
+
 static int gs_setup_class(struct usb_gadget *gadget,
 	const struct usb_ctrlrequest *ctrl)
 {
@@ -1734,52 +1573,72 @@ static int gs_setup_class(struct usb_gadget *gadget,
 	return ret;
 }
 
-static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
-		struct usb_request *req)
+/*
+ * gs_setup_complete
+ */
+static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct gs_dev *dev = ep->driver_data;
-	struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+	if (req->status || req->actual != req->length) {
+		pr_err("gs_setup_complete: status error, status=%d, "
+			"actual=%d, length=%d\n",
+			req->status, req->actual, req->length);
+	}
+}
 
-	switch (req->status) {
-	case 0:
-		/* normal completion */
-		if (req->actual != sizeof(port->port_line_coding))
-			usb_ep_set_halt(ep);
-		else if (port) {
-			struct usb_cdc_line_coding	*value = req->buf;
+/*
+ * gs_setup
+ *
+ * Implements all the control endpoint functionality that's not
+ * handled in hardware or the hardware driver.
+ *
+ * Returns the size of the data sent to the host, or a negative
+ * error number.
+ */
+static int gs_setup(struct usb_gadget *gadget,
+	const struct usb_ctrlrequest *ctrl)
+{
+	int		ret = -EOPNOTSUPP;
+	struct gs_dev	*dev = get_gadget_data(gadget);
+	struct usb_request *req = dev->dev_ctrl_req;
+	u16		wIndex = le16_to_cpu(ctrl->wIndex);
+	u16		wValue = le16_to_cpu(ctrl->wValue);
+	u16		wLength = le16_to_cpu(ctrl->wLength);
 
-			/* REVISIT:  we currently just remember this data.
-			 * If we change that, (a) validate it first, then
-			 * (b) update whatever hardware needs updating.
-			 */
-			spin_lock(&port->port_lock);
-			port->port_line_coding = *value;
-			spin_unlock(&port->port_lock);
-		}
+	req->complete = gs_setup_complete;
+
+	switch (ctrl->bRequestType & USB_TYPE_MASK) {
+	case USB_TYPE_STANDARD:
+		ret = gs_setup_standard(gadget, ctrl);
 		break;
 
-	case -ESHUTDOWN:
-		/* disconnect */
-		gs_free_req(ep, req);
+	case USB_TYPE_CLASS:
+		ret = gs_setup_class(gadget, ctrl);
 		break;
 
 	default:
-		/* unexpected */
+		pr_err("gs_setup: unknown request, type=%02x, request=%02x, "
+			"value=%04x, index=%04x, length=%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			wValue, wIndex, wLength);
 		break;
 	}
-	return;
-}
 
-/*
- * gs_setup_complete
- */
-static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	if (req->status || req->actual != req->length) {
-		pr_err("gs_setup_complete: status error, status=%d, "
-			"actual=%d, length=%d\n",
-			req->status, req->actual, req->length);
+	/* respond with data transfer before status phase? */
+	if (ret >= 0) {
+		req->length = ret;
+		req->zero = ret < wLength
+				&& (ret % gadget->ep0->maxpacket) == 0;
+		ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+		if (ret < 0) {
+			pr_err("gs_setup: cannot queue response, ret=%d\n",
+				ret);
+			req->status = 0;
+			gs_setup_complete(gadget->ep0, req);
+		}
 	}
+
+	/* device either stalls (ret < 0) or reports success */
+	return ret;
 }
 
 /*
@@ -1811,6 +1670,23 @@ static void gs_disconnect(struct usb_gadget *gadget)
 	pr_info("gs_disconnect: %s disconnected\n", GS_LONG_NAME);
 }
 
+static struct usb_gadget_driver gs_gadget_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+	.speed =		USB_SPEED_HIGH,
+#else
+	.speed =		USB_SPEED_FULL,
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+	.function =		GS_LONG_NAME,
+	.bind =			gs_bind,
+	.unbind =		gs_unbind,
+	.setup =		gs_setup,
+	.disconnect =		gs_disconnect,
+	.driver = {
+		.name =		GS_SHORT_NAME,
+		.owner =	THIS_MODULE,
+	},
+};
+
 /*
  * gs_set_config
  *
@@ -1826,9 +1702,8 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
 	int ret = 0;
 	struct usb_gadget *gadget = dev->dev_gadget;
 	struct usb_ep *ep;
-	struct usb_endpoint_descriptor *ep_desc;
+	struct usb_endpoint_descriptor *out, *in, *notify;
 	struct usb_request *req;
-	struct gs_req_entry *req_entry;
 
 	if (dev == NULL) {
 		pr_err("gs_set_config: NULL device pointer\n");
@@ -1846,86 +1721,62 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
 	case GS_BULK_CONFIG_ID:
 		if (use_acm)
 			return -EINVAL;
-		/* device specific optimizations */
-		if (gadget_is_net2280(gadget))
-			net2280_set_fifo_mode(gadget, 1);
 		break;
 	case GS_ACM_CONFIG_ID:
 		if (!use_acm)
 			return -EINVAL;
-		/* device specific optimizations */
-		if (gadget_is_net2280(gadget))
-			net2280_set_fifo_mode(gadget, 1);
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	dev->dev_config = config;
-
-	gadget_for_each_ep(ep, gadget) {
-
-		if (EP_NOTIFY_NAME
-		&& strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
-			ep_desc = choose_ep_desc(gadget,
+	in = choose_ep_desc(gadget,
+			&gs_highspeed_in_desc,
+			&gs_fullspeed_in_desc);
+	out = choose_ep_desc(gadget,
+			&gs_highspeed_out_desc,
+			&gs_fullspeed_out_desc);
+	notify = dev->dev_notify_ep
+		? choose_ep_desc(gadget,
 				&gs_highspeed_notify_desc,
-				&gs_fullspeed_notify_desc);
-			ret = usb_ep_enable(ep,ep_desc);
-			if (ret == 0) {
-				ep->driver_data = dev;
-				dev->dev_notify_ep = ep;
-				dev->dev_notify_ep_desc = ep_desc;
-			} else {
-				pr_err("gs_set_config: cannot enable NOTIFY "
-					"endpoint %s, ret=%d\n",
-					ep->name, ret);
-				goto exit_reset_config;
-			}
-		}
-
-		else if (strcmp(ep->name, EP_IN_NAME) == 0) {
-			ep_desc = choose_ep_desc(gadget,
-				&gs_highspeed_in_desc,
-				&gs_fullspeed_in_desc);
-			ret = usb_ep_enable(ep,ep_desc);
-			if (ret == 0) {
-				ep->driver_data = dev;
-				dev->dev_in_ep = ep;
-				dev->dev_in_ep_desc = ep_desc;
-			} else {
-				pr_err("gs_set_config: cannot enable IN "
-					"endpoint %s, ret=%d\n",
-					ep->name, ret);
-				goto exit_reset_config;
-			}
-		}
+				&gs_fullspeed_notify_desc)
+		: NULL;
 
-		else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
-			ep_desc = choose_ep_desc(gadget,
-				&gs_highspeed_out_desc,
-				&gs_fullspeed_out_desc);
-			ret = usb_ep_enable(ep,ep_desc);
-			if (ret == 0) {
-				ep->driver_data = dev;
-				dev->dev_out_ep = ep;
-				dev->dev_out_ep_desc = ep_desc;
-			} else {
-				pr_err("gs_set_config: cannot enable OUT "
-					"endpoint %s, ret=%d\n",
-					ep->name, ret);
-				goto exit_reset_config;
-			}
-		}
+	ret = usb_ep_enable(dev->dev_in_ep, in);
+	if (ret == 0) {
+		dev->dev_in_ep_desc = in;
+	} else {
+		pr_debug("%s: cannot enable %s %s, ret=%d\n",
+			__func__, "IN", dev->dev_in_ep->name, ret);
+		return ret;
+	}
 
+	ret = usb_ep_enable(dev->dev_out_ep, out);
+	if (ret == 0) {
+		dev->dev_out_ep_desc = out;
+	} else {
+		pr_debug("%s: cannot enable %s %s, ret=%d\n",
+			__func__, "OUT", dev->dev_out_ep->name, ret);
+fail0:
+		usb_ep_disable(dev->dev_in_ep);
+		return ret;
 	}
 
-	if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
-	|| (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
-		pr_err("gs_set_config: cannot find endpoints\n");
-		ret = -ENODEV;
-		goto exit_reset_config;
+	if (notify) {
+		ret = usb_ep_enable(dev->dev_notify_ep, notify);
+		if (ret == 0) {
+			dev->dev_notify_ep_desc = notify;
+		} else {
+			pr_debug("%s: cannot enable %s %s, ret=%d\n",
+				__func__, "NOTIFY",
+				dev->dev_notify_ep->name, ret);
+			usb_ep_disable(dev->dev_out_ep);
+			goto fail0;
+		}
 	}
 
+	dev->dev_config = config;
+
 	/* allocate and queue read requests */
 	ep = dev->dev_out_ep;
 	for (i=0; i<read_q_size && ret == 0; i++) {
@@ -1946,9 +1797,10 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
 	/* allocate write requests, and put on free list */
 	ep = dev->dev_in_ep;
 	for (i=0; i<write_q_size; i++) {
-		if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
-			req_entry->re_req->complete = gs_write_complete;
-			list_add(&req_entry->re_entry, &dev->dev_req_list);
+		req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+		if (req) {
+			req->complete = gs_write_complete;
+			list_add(&req->list, &dev->dev_req_list);
 		} else {
 			pr_err("gs_set_config: cannot allocate "
 					"write requests\n");
@@ -1986,7 +1838,7 @@ exit_reset_config:
  */
 static void gs_reset_config(struct gs_dev *dev)
 {
-	struct gs_req_entry *req_entry;
+	struct usb_request *req;
 
 	if (dev == NULL) {
 		pr_err("gs_reset_config: NULL device pointer\n");
@@ -2000,26 +1852,18 @@ static void gs_reset_config(struct gs_dev *dev)
 
 	/* free write requests on the free list */
 	while(!list_empty(&dev->dev_req_list)) {
-		req_entry = list_entry(dev->dev_req_list.next,
-			struct gs_req_entry, re_entry);
-		list_del(&req_entry->re_entry);
-		gs_free_req_entry(dev->dev_in_ep, req_entry);
+		req = list_entry(dev->dev_req_list.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		gs_free_req(dev->dev_in_ep, req);
 	}
 
 	/* disable endpoints, forcing completion of pending i/o; */
 	/* completion handlers free their requests in this case */
-	if (dev->dev_notify_ep) {
+	if (dev->dev_notify_ep)
 		usb_ep_disable(dev->dev_notify_ep);
-		dev->dev_notify_ep = NULL;
-	}
-	if (dev->dev_in_ep) {
-		usb_ep_disable(dev->dev_in_ep);
-		dev->dev_in_ep = NULL;
-	}
-	if (dev->dev_out_ep) {
-		usb_ep_disable(dev->dev_out_ep);
-		dev->dev_out_ep = NULL;
-	}
+	usb_ep_disable(dev->dev_in_ep);
+	usb_ep_disable(dev->dev_out_ep);
 }
 
 /*
@@ -2113,46 +1957,6 @@ static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
 }
 
 /*
- * gs_alloc_req_entry
- *
- * Allocates a request and its buffer, using the given
- * endpoint, buffer len, and kmalloc flags.
- */
-static struct gs_req_entry *
-gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
-{
-	struct gs_req_entry	*req;
-
-	req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
-	if (req == NULL)
-		return NULL;
-
-	req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
-	if (req->re_req == NULL) {
-		kfree(req);
-		return NULL;
-	}
-
-	req->re_req->context = req;
-
-	return req;
-}
-
-/*
- * gs_free_req_entry
- *
- * Frees a request and its buffer.
- */
-static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
-{
-	if (ep != NULL && req != NULL) {
-		if (req->re_req != NULL)
-			gs_free_req(ep, req->re_req);
-		kfree(req);
-	}
-}
-
-/*
  * gs_alloc_ports
  *
  * Allocate all ports and set the gs_dev struct to point to them.
@@ -2233,6 +2037,8 @@ static void gs_free_ports(struct gs_dev *dev)
 	}
 }
 
+/*-------------------------------------------------------------------------*/
+
 /* Circular Buffer */
 
 /*
@@ -2393,3 +2199,77 @@ gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
 
 	return count;
 }
+
+/*-------------------------------------------------------------------------*/
+
+static struct tty_driver *gs_tty_driver;
+
+/*
+ *  gs_module_init
+ *
+ *  Register as a USB gadget driver and a tty driver.
+ */
+static int __init gs_module_init(void)
+{
+	int i;
+	int retval;
+
+	retval = usb_gadget_register_driver(&gs_gadget_driver);
+	if (retval) {
+		pr_err("gs_module_init: cannot register gadget driver, "
+			"ret=%d\n", retval);
+		return retval;
+	}
+
+	gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
+	if (!gs_tty_driver)
+		return -ENOMEM;
+	gs_tty_driver->owner = THIS_MODULE;
+	gs_tty_driver->driver_name = GS_SHORT_NAME;
+	gs_tty_driver->name = "ttygs";
+	gs_tty_driver->major = GS_MAJOR;
+	gs_tty_driver->minor_start = GS_MINOR_START;
+	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	gs_tty_driver->init_termios = tty_std_termios;
+	/* must match GS_DEFAULT_DTE_RATE and friends */
+	gs_tty_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	gs_tty_driver->init_termios.c_ispeed = GS_DEFAULT_DTE_RATE;
+	gs_tty_driver->init_termios.c_ospeed = GS_DEFAULT_DTE_RATE;
+	tty_set_operations(gs_tty_driver, &gs_tty_ops);
+
+	for (i = 0; i < GS_NUM_PORTS; i++)
+		mutex_init(&gs_open_close_lock[i]);
+
+	retval = tty_register_driver(gs_tty_driver);
+	if (retval) {
+		usb_gadget_unregister_driver(&gs_gadget_driver);
+		put_tty_driver(gs_tty_driver);
+		pr_err("gs_module_init: cannot register tty driver, "
+				"ret=%d\n", retval);
+		return retval;
+	}
+
+	pr_info("gs_module_init: %s %s loaded\n",
+			GS_LONG_NAME, GS_VERSION_STR);
+	return 0;
+}
+module_init(gs_module_init);
+
+/*
+ * gs_module_exit
+ *
+ * Unregister as a tty driver and a USB gadget driver.
+ */
+static void __exit gs_module_exit(void)
+{
+	tty_unregister_driver(gs_tty_driver);
+	put_tty_driver(gs_tty_driver);
+	usb_gadget_unregister_driver(&gs_gadget_driver);
+
+	pr_info("gs_module_exit: %s %s unloaded\n",
+			GS_LONG_NAME, GS_VERSION_STR);
+}
+module_exit(gs_module_exit);