Merge commit 'v2.6.29' into timers/core

4 files changed, 71 insertions, 54 deletions

diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 5a8fd5d57a1..2dc7606f319 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -377,18 +377,8 @@ int __init musb_platform_init(struct musb *musb)
 	u32		revision;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
-#if 0
-	/* REVISIT there's something odd about clocking, this
-	 * didn't appear do the job ...
-	 */
-	musb->clock = clk_get(pDevice, "usb");
-	if (IS_ERR(musb->clock))
-		return PTR_ERR(musb->clock);
 
-	status = clk_enable(musb->clock);
-	if (status < 0)
-		return -ENODEV;
-#endif
+	clk_enable(musb->clock);
 
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
@@ -453,5 +443,8 @@ int musb_platform_exit(struct musb *musb)
 	}
 
 	phy_off();
+
+	clk_disable(musb->clock);
+
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2cc34fa05b7..af77e465900 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -115,7 +115,7 @@
 
 
 unsigned musb_debug;
-module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
@@ -767,6 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 			musb_root_disconnect(musb);
 			if (musb->a_wait_bcon != 0)
 				musb_platform_try_idle(musb, jiffies
@@ -1815,7 +1816,7 @@ static void musb_free(struct musb *musb)
 #ifdef CONFIG_SYSFS
 	device_remove_file(musb->controller, &dev_attr_mode);
 	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2063,7 +2064,7 @@ fail2:
 #ifdef CONFIG_SYSFS
 	device_remove_file(musb->controller, &dev_attr_mode);
 	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2243,10 +2244,10 @@ static int __init musb_init(void)
 	return platform_driver_probe(&musb_driver, musb_probe);
 }
 
-/* make us init after usbcore and before usb
- * gadget and host-side drivers start to register
+/* make us init after usbcore and i2c (transceivers, regulators, etc)
+ * and before usb gadget and host-side drivers start to register
  */
-subsys_initcall(musb_init);
+fs_initcall(musb_init);
 
 static void __exit musb_cleanup(void)
 {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4ea30538798..c7ebd0867fc 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -575,7 +575,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	struct usb_request	*request = &req->request;
 	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
 	void __iomem		*epio = musb->endpoints[epnum].regs;
-	u16			fifo_count = 0;
+	unsigned		fifo_count = 0;
 	u16			len = musb_ep->packet_sz;
 
 	csr = musb_readw(epio, MUSB_RXCSR);
@@ -687,7 +687,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					len, fifo_count,
 					musb_ep->packet_sz);
 
-			fifo_count = min(len, fifo_count);
+			fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef	CONFIG_USB_TUSB_OMAP_DMA
 			if (tusb_dma_omap() && musb_ep->dma) {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index a035ceccf95..6dbbd0786a6 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
 static struct musb_qh *
 musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 {
-	int			is_in;
 	struct musb_hw_ep	*ep = qh->hw_ep;
 	struct musb		*musb = ep->musb;
+	int			is_in = usb_pipein(urb->pipe);
 	int			ready = qh->is_ready;
 
-	if (ep->is_shared_fifo)
-		is_in = 1;
-	else
-		is_in = usb_pipein(urb->pipe);
-
 	/* save toggle eagerly, for paranoia */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_BULK:
@@ -432,7 +427,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb,
 	else
 		qh = musb_giveback(qh, urb, urb->status);
 
-	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+	if (qh != NULL && qh->is_ready) {
 		DBG(4, "... next ep%d %cX urb %p\n",
 				hw_ep->epnum, is_in ? 'R' : 'T',
 				next_urb(qh));
@@ -942,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
 	switch (musb->ep0_stage) {
 	case MUSB_EP0_IN:
 		fifo_dest = urb->transfer_buffer + urb->actual_length;
-		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
-					- urb->actual_length)));
+		fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+				   urb->actual_length);
 		if (fifo_count < len)
 			urb->status = -EOVERFLOW;
 
@@ -976,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
 		}
 		/* FALLTHROUGH */
 	case MUSB_EP0_OUT:
-		fifo_count = min(qh->maxpacket, ((u16)
-				(urb->transfer_buffer_length
-				- urb->actual_length)));
-
+		fifo_count = min_t(size_t, qh->maxpacket,
+				   urb->transfer_buffer_length -
+				   urb->actual_length);
 		if (fifo_count) {
 			fifo_dest = (u8 *) (urb->transfer_buffer
 					+ urb->actual_length);
@@ -1161,7 +1155,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
-	struct musb_qh		*qh = hw_ep->out_qh;
+	struct musb_qh		*qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+							    : hw_ep->out_qh;
 	u32			status = 0;
 	void __iomem		*mbase = musb->mregs;
 	struct dma_channel	*dma;
@@ -1308,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		 * packets before updating TXCSR ... other docs disagree ...
 		 */
 		/* PIO:  start next packet in this URB */
-		wLength = min(qh->maxpacket, (u16) wLength);
+		if (wLength > qh->maxpacket)
+			wLength = qh->maxpacket;
 		musb_write_fifo(hw_ep, wLength, buf);
 		qh->segsize = wLength;
 
@@ -1867,19 +1863,21 @@ static int musb_urb_enqueue(
 	}
 	qh->type_reg = type_reg;
 
-	/* precompute rxinterval/txinterval register */
-	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	/* Precompute RXINTERVAL/TXINTERVAL register */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_INT:
-		/* fullspeed uses linear encoding */
-		if (USB_SPEED_FULL == urb->dev->speed) {
-			interval = epd->bInterval;
-			if (!interval)
-				interval = 1;
+		/*
+		 * Full/low speeds use the  linear encoding,
+		 * high speed uses the logarithmic encoding.
+		 */
+		if (urb->dev->speed <= USB_SPEED_FULL) {
+			interval = max_t(u8, epd->bInterval, 1);
+			break;
 		}
 		/* FALLTHROUGH */
 	case USB_ENDPOINT_XFER_ISOC:
-		/* iso always uses log encoding */
+		/* ISO always uses logarithmic encoding */
+		interval = min_t(u8, epd->bInterval, 16);
 		break;
 	default:
 		/* REVISIT we actually want to use NAK limits, hinting to the
@@ -2037,9 +2035,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		goto done;
 
 	/* Any URB not actively programmed into endpoint hardware can be
-	 * immediately given back.  Such an URB must be at the head of its
+	 * immediately given back; that's any URB not at the head of an
 	 * endpoint queue, unless someday we get real DMA queues.  And even
-	 * then, it might not be known to the hardware...
+	 * if it's at the head, it might not be known to the hardware...
 	 *
 	 * Otherwise abort current transfer, pending dma, etc.; urb->status
 	 * has already been updated.  This is a synchronous abort; it'd be
@@ -2078,6 +2076,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		qh->is_ready = 0;
 		__musb_giveback(musb, urb, 0);
 		qh->is_ready = ready;
+
+		/* If nothing else (usually musb_giveback) is using it
+		 * and its URB list has emptied, recycle this qh.
+		 */
+		if (ready && list_empty(&qh->hep->urb_list)) {
+			qh->hep->hcpriv = NULL;
+			list_del(&qh->ring);
+			kfree(qh);
+		}
 	} else
 		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
 done:
@@ -2093,15 +2100,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 	unsigned long		flags;
 	struct musb		*musb = hcd_to_musb(hcd);
 	u8			is_in = epnum & USB_DIR_IN;
-	struct musb_qh		*qh = hep->hcpriv;
-	struct urb		*urb, *tmp;
+	struct musb_qh		*qh;
+	struct urb		*urb;
 	struct list_head	*sched;
 
-	if (!qh)
-		return;
-
 	spin_lock_irqsave(&musb->lock, flags);
 
+	qh = hep->hcpriv;
+	if (qh == NULL)
+		goto exit;
+
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		sched = &musb->control;
@@ -2135,13 +2143,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 
 		/* cleanup */
 		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
-	} else
-		urb = NULL;
 
-	/* then just nuke all the others */
-	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
-		musb_giveback(qh, urb, -ESHUTDOWN);
+		/* Then nuke all the others ... and advance the
+		 * queue on hw_ep (e.g. bulk ring) when we're done.
+		 */
+		while (!list_empty(&hep->urb_list)) {
+			urb = next_urb(qh);
+			urb->status = -ESHUTDOWN;
+			musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+		}
+	} else {
+		/* Just empty the queue; the hardware is busy with
+		 * other transfers, and since !qh->is_ready nothing
+		 * will activate any of these as it advances.
+		 */
+		while (!list_empty(&hep->urb_list))
+			__musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
 
+		hep->hcpriv = NULL;
+		list_del(&qh->ring);
+		kfree(qh);
+	}
+exit:
 	spin_unlock_irqrestore(&musb->lock, flags);
 }