Merge branch 'dmaengine' into async-tx-next

Conflicts:
	crypto/async_tx/async_xor.c
	drivers/dma/ioat/dma_v2.h
	drivers/dma/ioat/pci.c
	drivers/md/raid5.c

1 files changed, 37 insertions, 52 deletions

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 751a533a434..ec6c132a25b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	kfree(buf);
 }
 
-static void pl2303_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = PL2303_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (pl2303_buf_data_avail(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current) ||
-		    port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	pl2303_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-
 	/* shutdown our urbs */
 	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			set_control_lines(port->serial->dev, 0);
-		}
-	}
 }
 
 static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
 
@@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -897,7 +878,7 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 		dbg("%s - error sending break = %d", __func__, result);
 }
 
-static void pl2303_shutdown(struct usb_serial *serial)
+static void pl2303_release(struct usb_serial *serial)
 {
 	int i;
 	struct pl2303_private *priv;
@@ -909,7 +890,6 @@ static void pl2303_shutdown(struct usb_serial *serial)
 		if (priv) {
 			pl2303_buf_free(priv->buf);
 			kfree(priv);
-			usb_set_serial_port_data(serial->port[i], NULL);
 		}
 	}
 }
@@ -946,6 +926,8 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
+	if (priv->line_status & UART_BREAK_ERROR)
+		usb_serial_handle_break(port);
 	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
@@ -1056,7 +1038,8 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 		if (line_status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 		for (i = 0; i < urb->actual_length; ++i)
-			tty_insert_flip_char(tty, data[i], tty_flag);
+			if (!usb_serial_handle_sysrq_char(port, data[i]))
+				tty_insert_flip_char(tty, data[i], tty_flag);
 		tty_flip_buffer_push(tty);
 	}
 	tty_kref_put(tty);
@@ -1125,6 +1108,8 @@ static struct usb_serial_driver pl2303_device = {
 	.num_ports =		1,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
+	.dtr_rts = 		pl2303_dtr_rts,
+	.carrier_raised =	pl2303_carrier_raised,
 	.write =		pl2303_write,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,
@@ -1137,7 +1122,7 @@ static struct usb_serial_driver pl2303_device = {
 	.write_room =		pl2303_write_room,
 	.chars_in_buffer =	pl2303_chars_in_buffer,
 	.attach =		pl2303_startup,
-	.shutdown =		pl2303_shutdown,
+	.release =		pl2303_release,
 };
 
 static int __init pl2303_init(void)