aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/storage
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-01-04 16:25:44 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-04 16:25:44 -0800
commitc6c88bbde4d8b2ffe9886b7130b2e23781d424e5 (patch)
tree47c2b61983acc6fbc42d89813729b87bbaf2aed9 /drivers/usb/storage
parent0356dbb7fe87ba59558902e536d9f960e87353c1 (diff)
parentc8dd7709c534ab0d713aa698c99132b6c812b57c (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/Kconfig23
-rw-r--r--drivers/usb/storage/Makefile5
-rw-r--r--drivers/usb/storage/alauda.c1119
-rw-r--r--drivers/usb/storage/alauda.h100
-rw-r--r--drivers/usb/storage/debug.c1
-rw-r--r--drivers/usb/storage/initializers.h4
-rw-r--r--drivers/usb/storage/libusual.c266
-rw-r--r--drivers/usb/storage/onetouch.c27
-rw-r--r--drivers/usb/storage/protocol.h14
-rw-r--r--drivers/usb/storage/sddr09.c214
-rw-r--r--drivers/usb/storage/sddr09.h15
-rw-r--r--drivers/usb/storage/transport.h31
-rw-r--r--drivers/usb/storage/unusual_devs.h74
-rw-r--r--drivers/usb/storage/usb.c160
-rw-r--r--drivers/usb/storage/usb.h40
15 files changed, 1798 insertions, 295 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index c41d64dbb0f..92be101feba 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -112,6 +112,15 @@ config USB_STORAGE_JUMPSHOT
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
+config USB_STORAGE_ALAUDA
+ bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)"
+ depends on USB_STORAGE && EXPERIMENTAL
+ help
+ Say Y here to include additional code to support the Olympus MAUSB-10
+ and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+ These devices are based on the Alauda chip and support support both
+ XD and SmartMedia cards.
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
@@ -124,3 +133,17 @@ config USB_STORAGE_ONETOUCH
hard drive's as an input device. An action can be associated with
this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
+
+config USB_LIBUSUAL
+ bool "The shared table of common (or usual) storage devices"
+ depends on USB
+ help
+ This module contains a table of common (or usual) devices
+ for usb-storage and ub drivers, and allows to switch binding
+ of these devices without rebuilding modules.
+
+ Typical syntax of /etc/modprobe.conf is:
+
+ options libusual bias="ub"
+
+ If unsure, say N.
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 44ab8f9978f..8cbba22508a 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -18,7 +18,12 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
+
+ifneq ($(CONFIG_USB_LIBUSUAL),)
+ obj-$(CONFIG_USB) += libusual.o
+endif
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
new file mode 100644
index 00000000000..4d3cbb12b71
--- /dev/null
+++ b/drivers/usb/storage/alauda.c
@@ -0,0 +1,1119 @@
+/*
+ * Driver for Alauda-based card readers
+ *
+ * Current development and maintenance by:
+ * (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
+ *
+ * Alauda implements a vendor-specific command set to access two media reader
+ * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
+ * which are accepted by these devices.
+ *
+ * The driver was developed through reverse-engineering, with the help of the
+ * sddr09 driver which has many similarities, and with some help from the
+ * (very old) vendor-supplied GPL sma03 driver.
+ *
+ * For protocol info, see http://alauda.sourceforge.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "alauda.h"
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+#define MEDIA_PORT(us) us->srb->device->lun
+#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
+
+#define PBA_LO(pba) ((pba & 0xF) << 5)
+#define PBA_HI(pba) (pba >> 3)
+#define PBA_ZONE(pba) (pba >> 11)
+
+/*
+ * Media handling
+ */
+
+struct alauda_card_info {
+ unsigned char id; /* id byte */
+ unsigned char chipshift; /* 1<<cs bytes total capacity */
+ unsigned char pageshift; /* 1<<ps bytes in a page */
+ unsigned char blockshift; /* 1<<bs pages per block */
+ unsigned char zoneshift; /* 1<<zs blocks per zone */
+};
+
+static struct alauda_card_info alauda_card_ids[] = {
+ /* NAND flash */
+ { 0x6e, 20, 8, 4, 8}, /* 1 MB */
+ { 0xe8, 20, 8, 4, 8}, /* 1 MB */
+ { 0xec, 20, 8, 4, 8}, /* 1 MB */
+ { 0x64, 21, 8, 4, 9}, /* 2 MB */
+ { 0xea, 21, 8, 4, 9}, /* 2 MB */
+ { 0x6b, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe3, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe5, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe6, 23, 9, 4, 10}, /* 8 MB */
+ { 0x73, 24, 9, 5, 10}, /* 16 MB */
+ { 0x75, 25, 9, 5, 10}, /* 32 MB */
+ { 0x76, 26, 9, 5, 10}, /* 64 MB */
+ { 0x79, 27, 9, 5, 10}, /* 128 MB */
+ { 0x71, 28, 9, 5, 10}, /* 256 MB */
+
+ /* MASK ROM */
+ { 0x5d, 21, 9, 4, 8}, /* 2 MB */
+ { 0xd5, 22, 9, 4, 9}, /* 4 MB */
+ { 0xd6, 23, 9, 4, 10}, /* 8 MB */
+ { 0x57, 24, 9, 4, 11}, /* 16 MB */
+ { 0x58, 25, 9, 4, 12}, /* 32 MB */
+ { 0,}
+};
+
+static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
+ int i;
+
+ for (i = 0; alauda_card_ids[i].id != 0; i++)
+ if (alauda_card_ids[i].id == id)
+ return &(alauda_card_ids[i]);
+ return NULL;
+}
+
+/*
+ * ECC computation.
+ */
+
+static unsigned char parity[256];
+static unsigned char ecc2[256];
+
+static void nand_init_ecc(void) {
+ int i, j, a;
+
+ parity[0] = 0;
+ for (i = 1; i < 256; i++)
+ parity[i] = (parity[i&(i-1)] ^ 1);
+
+ for (i = 0; i < 256; i++) {
+ a = 0;
+ for (j = 0; j < 8; j++) {
+ if (i & (1<<j)) {
+ if ((j & 1) == 0)
+ a ^= 0x04;
+ if ((j & 2) == 0)
+ a ^= 0x10;
+ if ((j & 4) == 0)
+ a ^= 0x40;
+ }
+ }
+ ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
+ }
+}
+
+/* compute 3-byte ecc on 256 bytes */
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
+ int i, j, a;
+ unsigned char par, bit, bits[8];
+
+ par = 0;
+ for (j = 0; j < 8; j++)
+ bits[j] = 0;
+
+ /* collect 16 checksum bits */
+ for (i = 0; i < 256; i++) {
+ par ^= data[i];
+ bit = parity[data[i]];
+ for (j = 0; j < 8; j++)
+ if ((i & (1<<j)) == 0)
+ bits[j] ^= bit;
+ }
+
+ /* put 4+4+4 = 12 bits in the ecc */
+ a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
+ ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
+ ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ ecc[2] = ecc2[par];
+}
+
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
+ return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
+}
+
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
+ memcpy(data, ecc, 3);
+}
+
+/*
+ * Alauda driver
+ */
+
+/*
+ * Forget our PBA <---> LBA mappings for a particular port
+ */
+static void alauda_free_maps (struct alauda_media_info *media_info)
+{
+ unsigned int shift = media_info->zoneshift
+ + media_info->blockshift + media_info->pageshift;
+ unsigned int num_zones = media_info->capacity >> shift;
+ unsigned int i;
+
+ if (media_info->lba_to_pba != NULL)
+ for (i = 0; i < num_zones; i++) {
+ kfree(media_info->lba_to_pba[i]);
+ media_info->lba_to_pba[i] = NULL;
+ }
+
+ if (media_info->pba_to_lba != NULL)
+ for (i = 0; i < num_zones; i++) {
+ kfree(media_info->pba_to_lba[i]);
+ media_info->pba_to_lba[i] = NULL;
+ }
+}
+
+/*
+ * Returns 2 bytes of status data
+ * The first byte describes media status, and second byte describes door status
+ */
+static int alauda_get_media_status(struct us_data *us, unsigned char *data)
+{
+ int rc;
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_GET_XD_MEDIA_STATUS;
+ else
+ command = ALAUDA_GET_SM_MEDIA_STATUS;
+
+ rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ command, 0xc0, 0, 1, data, 2);
+
+ US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n",
+ data[0], data[1]);
+
+ return rc;
+}
+
+/*
+ * Clears the "media was changed" bit so that we know when it changes again
+ * in the future.
+ */
+static int alauda_ack_media(struct us_data *us)
+{
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_ACK_XD_MEDIA_CHANGE;
+ else
+ command = ALAUDA_ACK_SM_MEDIA_CHANGE;
+
+ return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ command, 0x40, 0, 1, NULL, 0);
+}
+
+/*
+ * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
+ * and some other details.
+ */
+static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
+{
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_GET_XD_MEDIA_SIG;
+ else
+ command = ALAUDA_GET_SM_MEDIA_SIG;
+
+ return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ command, 0xc0, 0, 0, data, 4);
+}
+
+/*
+ * Resets the media status (but not the whole device?)
+ */
+static int alauda_reset_media(struct us_data *us)
+{
+ unsigned char *command = us->iobuf;
+
+ memset(command, 0, 9);
+ command[0] = ALAUDA_BULK_CMD;
+ command[1] = ALAUDA_BULK_RESET_MEDIA;
+ command[8] = MEDIA_PORT(us);
+
+ return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+}
+
+/*
+ * Examines the media and deduces capacity, etc.
+ */
+static int alauda_init_media(struct us_data *us)
+{
+ unsigned char *data = us->iobuf;
+ int ready = 0;
+ struct alauda_card_info *media_info;
+ unsigned int num_zones;
+
+ while (ready == 0) {
+ msleep(20);
+
+ if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (data[0] & 0x10)
+ ready = 1;
+ }
+
+ US_DEBUGP("alauda_init_media: We are ready for action!\n");
+
+ if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ msleep(10);
+
+ if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (data[0] != 0x14) {
+ US_DEBUGP("alauda_init_media: Media not ready after ack\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n",
+ data[0], data[1], data[2], data[3]);
+ media_info = alauda_card_find_id(data[1]);
+ if (media_info == NULL) {
+ printk("alauda_init_media: Unrecognised media signature: "
+ "%02X %02X %02X %02X\n",
+ data[0], data[1], data[2], data[3]);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
+ US_DEBUGP("Found media with capacity: %ldMB\n",
+ MEDIA_INFO(us).capacity >> 20);
+
+ MEDIA_INFO(us).pageshift = media_info->pageshift;
+ MEDIA_INFO(us).blockshift = media_info->blockshift;
+ MEDIA_INFO(us).zoneshift = media_info->zoneshift;
+
+ MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
+ MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
+ MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
+
+ MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
+ MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
+
+ num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+ MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+ MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+
+ if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Examines the media status and does the right thing when the media has gone,
+ * appeared, or changed.
+ */
+static int alauda_check_media(struct us_data *us)
+{
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char status[2];
+ int rc;
+
+ rc = alauda_get_media_status(us, status);
+
+ /* Check for no media or door open */
+ if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
+ || ((status[1] & 0x01) == 0)) {
+ US_DEBUGP("alauda_check_media: No media, or door open\n");
+ alauda_free_maps(&MEDIA_INFO(us));
+ info->sense_key = 0x02;
+ info->sense_asc = 0x3A;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* Check for media change */
+ if (status[0] & 0x08) {
+ US_DEBUGP("alauda_check_media: Media change detected\n");
+ alauda_free_maps(&MEDIA_INFO(us));
+ alauda_init_media(us);
+
+ info->sense_key = UNIT_ATTENTION;
+ info->sense_asc = 0x28;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Checks the status from the 2nd status register
+ * Returns 3 bytes of status data, only the first is known
+ */
+static int alauda_check_status2(struct us_data *us)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
+ 0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
+ };
+ unsigned char data[3];
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 3, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]);
+ if (data[0] & ALAUDA_STATUS_ERROR)
+ return USB_STOR_XFER_ERROR;
+
+ return USB_STOR_XFER_GOOD;
+}
+
+/*
+ * Gets the redundancy data for the first page of a PBA
+ * Returns 16 bytes.
+ */
+static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
+ PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
+ };
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 16, NULL);
+}
+
+/*
+ * Finds the first unused PBA in a zone
+ * Returns the absolute PBA of an unused PBA, or 0 if none found.
+ */
+static u16 alauda_find_unused_pba(struct alauda_media_info *info,
+ unsigned int zone)
+{
+ u16 *pba_to_lba = info->pba_to_lba[zone];
+ unsigned int i;
+
+ for (i = 0; i < info->zonesize; i++)
+ if (pba_to_lba[i] == UNDEF)
+ return (zone << info->zoneshift) + i;
+
+ return 0;
+}
+
+/*
+ * Reads the redundancy data for all PBA's in a zone
+ * Produces lba <--> pba mappings
+ */
+static int alauda_read_map(struct us_data *us, unsigned int zone)
+{
+ unsigned char *data = us->iobuf;
+ int result;
+ int i, j;
+ unsigned int zonesize = MEDIA_INFO(us).zonesize;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ unsigned int lba_offset, lba_real, blocknum;
+ unsigned int zone_base_lba = zone * uzonesize;
+ unsigned int zone_base_pba = zone * zonesize;
+ u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ if (lba_to_pba == NULL || pba_to_lba == NULL) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto error;
+ }
+
+ US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone);
+
+ /* 1024 PBA's per zone */
+ for (i = 0; i < zonesize; i++)
+ lba_to_pba[i] = pba_to_lba[i] = UNDEF;
+
+ for (i = 0; i < zonesize; i++) {
+ blocknum = zone_base_pba + i;
+
+ result = alauda_get_redu_data(us, blocknum, data);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto error;
+ }
+
+ /* special PBAs have control field 0^16 */
+ for (j = 0; j < 16; j++)
+ if (data[j] != 0)
+ goto nonz;
+ pba_to_lba[i] = UNUSABLE;
+ US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum);
+ continue;
+
+ nonz:
+ /* unwritten PBAs have control field FF^16 */
+ for (j = 0; j < 16; j++)
+ if (data[j] != 0xff)
+ goto nonff;
+ continue;
+
+ nonff:
+ /* normal PBAs start with six FFs */
+ if (j < 6) {
+ US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: "
+ "reserved area = %02X%02X%02X%02X "
+ "data status %02X block status %02X\n",
+ blocknum, data[0], data[1], data[2], data[3],
+ data[4], data[5]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ if ((data[6] >> 4) != 0x01) {
+ US_DEBUGP("alauda_read_map: PBA %d has invalid address "
+ "field %02X%02X/%02X%02X\n",
+ blocknum, data[6], data[7], data[11], data[12]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ /* check even parity */
+ if (parity[data[6] ^ data[7]]) {
+ printk("alauda_read_map: Bad parity in LBA for block %d"
+ " (%02X %02X)\n", i, data[6], data[7]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ lba_offset = short_pack(data[7], data[6]);
+ lba_offset = (lba_offset & 0x07FF) >> 1;
+ lba_real = lba_offset + zone_base_lba;
+
+ /*
+ * Every 1024 physical blocks ("zone"), the LBA numbers
+ * go back to zero, but are within a higher block of LBA's.
+ * Also, there is a maximum of 1000 LBA's per zone.
+ * In other words, in PBA 1024-2047 you will find LBA 0-999
+ * which are really LBA 1000-1999. This allows for 24 bad
+ * or special physical blocks per zone.
+ */
+
+ if (lba_offset >= uzonesize) {
+ printk("alauda_read_map: Bad low LBA %d for block %d\n",
+ lba_real, blocknum);
+ continue;
+ }
+
+ if (lba_to_pba[lba_offset] != UNDEF) {
+ printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
+ lba_real, lba_to_pba[lba_offset], blocknum);
+ continue;
+ }
+
+ pba_to_lba[i] = lba_real;
+ lba_to_pba[lba_offset] = blocknum;
+ continue;
+ }
+
+ MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
+ MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
+ result = 0;
+ goto out;
+
+error:
+ kfree(lba_to_pba);
+ kfree(pba_to_lba);
+out:
+ return result;
+}
+
+/*
+ * Checks to see whether we have already mapped a certain zone
+ * If we haven't, the map is generated
+ */
+static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
+{
+ if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
+ || MEDIA_INFO(us).pba_to_lba[zone] == NULL)
+ alauda_read_map(us, zone);
+}
+
+/*
+ * Erases an entire block
+ */
+static int alauda_erase_block(struct us_data *us, u16 pba)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
+ };
+ unsigned char buf[2];
+
+ US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ buf, 2, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n",
+ buf[0], buf[1]);
+ return rc;
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, including interleaved
+ * redundancy data. Returns (pagesize+64)*pages bytes in data.
+ */
+static int alauda_read_block_raw(struct us_data *us, u16 pba,
+ unsigned int page, unsigned int pages, unsigned char *data)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
+ };
+
+ US_DEBUGP("alauda_read_block: pba %d page %d count %d\n",
+ pba, page, pages);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, excluding redundancy
+ * data. Returns pagesize*pages bytes in data. Note that data must be big enough
+ * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
+ * trailing bytes outside this function.
+ */
+static int alauda_read_block(struct us_data *us, u16 pba,
+ unsigned int page, unsigned int pages, unsigned char *data)
+{
+ int i, rc;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+
+ rc = alauda_read_block_raw(us, pba, page, pages, data);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ /* Cut out the redundancy data */
+ for (i = 0; i < pages; i++) {
+ int dest_offset = i * pagesize;
+ int src_offset = i * (pagesize + 64);
+ memmove(data + dest_offset, data + src_offset, pagesize);
+ }
+
+ return rc;
+}
+
+/*
+ * Writes an entire block of data and checks status after write.
+ * Redundancy data must be already included in data. Data should be
+ * (pagesize+64)*blocksize bytes in length.
+ */
+static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
+{
+ int rc;
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
+ };
+
+ US_DEBUGP("alauda_write_block: pba %d\n", pba);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
+ (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
+ NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return alauda_check_status2(us);
+}
+
+/*
+ * Write some data to a specific LBA.
+ */
+static int alauda_write_lba(struct us_data *us, u16 lba,
+ unsigned int page, unsigned int pages,
+ unsigned char *ptr, unsigned char *blockbuffer)
+{
+ u16 pba, lbap, new_pba;
+ unsigned char *bptr, *cptr, *xptr;
+ unsigned char ecc[3];
+ int i, result;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ unsigned int zonesize = MEDIA_INFO(us).zonesize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int lba_offset = lba % uzonesize;
+ unsigned int new_pba_offset;
+ unsigned int zone = lba / uzonesize;
+
+ alauda_ensure_map_for_zone(us, zone);
+
+ pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+ if (pba == 1) {
+ /* Maybe it is impossible to write to PBA 1.
+ Fake success, but don't do anything. */
+ printk("alauda_write_lba: avoid writing to pba 1\n");
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
+ if (!new_pba) {
+ printk("alauda_write_lba: Out of unused blocks\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* read old contents */
+ if (pba != UNDEF) {
+ result = alauda_read_block_raw(us, pba, 0,
+ blocksize, blockbuffer);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+ } else {
+ memset(blockbuffer, 0, blocksize * (pagesize + 64));
+ }
+
+ lbap = (lba_offset << 1) | 0x1000;
+ if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
+ lbap ^= 1;
+
+ /* check old contents and fill lba */
+ for (i = 0; i < blocksize; i++) {
+ bptr = blockbuffer + (i * (pagesize + 64));
+ cptr = bptr + pagesize;
+ nand_compute_ecc(bptr, ecc);
+ if (!nand_compare_ecc(cptr+13, ecc)) {
+ US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+13, ecc);
+ }
+ nand_compute_ecc(bptr + (pagesize / 2), ecc);
+ if (!nand_compare_ecc(cptr+8, ecc)) {
+ US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+8, ecc);
+ }
+ cptr[6] = cptr[11] = MSB_of(lbap);
+ cptr[7] = cptr[12] = LSB_of(lbap);
+ }
+
+ /* copy in new stuff and compute ECC */
+ xptr = ptr;
+ for (i = page; i < page+pages; i++) {
+ bptr = blockbuffer + (i * (pagesize + 64));
+ cptr = bptr + pagesize;
+ memcpy(bptr, xptr, pagesize);
+ xptr += pagesize;
+ nand_compute_ecc(bptr, ecc);
+ nand_store_ecc(cptr+13, ecc);
+ nand_compute_ecc(bptr + (pagesize / 2), ecc);
+ nand_store_ecc(cptr+8, ecc);
+ }
+
+ result = alauda_write_block(us, new_pba, blockbuffer);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+
+ new_pba_offset = new_pba - (zone * zonesize);
+ MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
+ MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
+ US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n",
+ lba, new_pba);
+
+ if (pba != UNDEF) {
+ unsigned int pba_offset = pba - (zone * zonesize);
+ result = alauda_erase_block(us, pba);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+ MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read data from a specific sector address
+ */
+static int alauda_read_data(struct us_data *us, unsigned long address,
+ unsigned int sectors)
+{
+ unsigned char *buffer;
+ u16 lba, max_lba;
+ unsigned int page, len, index, offset;
+ unsigned int blockshift = MEDIA_INFO(us).blockshift;
+ unsigned int pageshift = MEDIA_INFO(us).pageshift;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ int result;
+
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ * We make this buffer big enough to hold temporary redundancy data,
+ * which we use when reading the data blocks.
+ */
+
+ len = min(sectors, blocksize) * (pagesize + 64);
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk("alauda_read_data: Out of memory\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Figure out the initial LBA and page */
+ lba = address >> blockshift;
+ page = (address & MEDIA_INFO(us).blockmask);
+ max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
+
+ result = USB_STOR_TRANSPORT_GOOD;
+ index = offset = 0;
+
+ while (sectors > 0) {
+ unsigned int zone = lba / uzonesize; /* integer division */
+ unsigned int lba_offset = lba - (zone * uzonesize);
+ unsigned int pages;
+ u16 pba;
+ alauda_ensure_map_for_zone(us, zone);
+
+ /* Not overflowing capacity? */
+ if (lba >= max_lba) {
+ US_DEBUGP("Error: Requested lba %u exceeds "
+ "maximum %u\n", lba, max_lba);
+ result = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+
+ /* Find number of pages we can read in this block */
+ pages = min(sectors, blocksize - page);
+ len = pages << pageshift;
+
+ /* Find where this lba lives on disk */
+ pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+
+ if (pba == UNDEF) { /* this lba was never written */
+ US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
+ pages, lba, page);
+
+ /* This is not really an error. It just means
+ that the block has never been written.
+ Instead of returning USB_STOR_TRANSPORT_ERROR
+ it is better to return all zero data. */
+
+ memset(buffer, 0, len);
+ } else {
+ US_DEBUGP("Read %d pages, from PBA %d"
+ " (LBA %d) page %d\n",
+ pages, pba, lba, page);
+
+ result = alauda_read_block(us, pba, page, pages, buffer);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+ }
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &index, &offset, TO_XFER_BUF);
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ return result;
+}
+
+/*
+ * Write data to a specific sector address
+ */
+static int alauda_write_data(struct us_data *us, unsigned long address,
+ unsigned int sectors)
+{
+ unsigned char *buffer, *blockbuffer;
+ unsigned int page, len, index, offset;
+ unsigned int blockshift = MEDIA_INFO(us).blockshift;
+ unsigned int pageshift = MEDIA_INFO(us).pageshift;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ u16 lba, max_lba;
+ int result;
+
+ /*
+ * Since we don't write the user data directly to the device,
+ * we have to create a bounce buffer and move the data a piece
+ * at a time between the bounce buffer and the actual transfer buffer.
+ */
+
+ len = min(sectors, blocksize) * pagesize;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk("alauda_write_data: Out of memory\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /*
+ * We also need a temporary block buffer, where we read in the old data,
+ * overwrite parts with the new data, and manipulate the redundancy data
+ */
+ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
+ if (blockbuffer == NULL) {
+ printk("alauda_write_data: Out of memory\n");
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Figure out the initial LBA and page */
+ lba = address >> blockshift;
+ page = (address & MEDIA_INFO(us).blockmask);
+ max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
+
+ result = USB_STOR_TRANSPORT_GOOD;
+ index = offset = 0;
+
+ while (sectors > 0) {
+ /* Write as many sectors as possible in this block */
+ unsigned int pages = min(sectors, blocksize - page);
+ len = pages << pageshift;
+
+ /* Not overflowing capacity? */
+ if (lba >= max_lba) {
+ US_DEBUGP("alauda_write_data: Requested lba %u exceeds "
+ "maximum %u\n", lba, max_lba);
+ result = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+
+ /* Get the data from the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &index, &offset, FROM_XFER_BUF);
+
+ result = alauda_write_lba(us, lba, page, pages, buffer,
+ blockbuffer);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ kfree(blockbuffer);
+ return result;
+}
+
+/*
+ * Our interface with the rest of the world
+ */
+
+static void alauda_info_destructor(void *extra)
+{
+ struct alauda_info *info = (struct alauda_info *) extra;
+ int port;
+
+ if (!info)
+ return;
+
+ for (port = 0; port < 2; port++) {
+ struct alauda_media_info *media_info = &info->port[port];
+
+ alauda_free_maps(media_info);
+ kfree(media_info->lba_to_pba);
+ kfree(media_info->pba_to_lba);
+ }
+}
+
+/*
+ * Initialize alauda_info struct and find the data-write endpoint
+ */
+int init_alauda(struct us_data *us)
+{
+ struct alauda_info *info;
+ struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
+ nand_init_ecc();
+
+ us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
+ if (!us->extra) {
+ US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
+ "alauda info struct!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ info = (struct alauda_info *) us->extra;
+ us->extra_destructor = alauda_info_destructor;
+
+ info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
+ altsetting->endpoint[0].desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int rc;
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_response[36] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (srb->cmnd[0] == INQUIRY) {
+ US_DEBUGP("alauda_transport: INQUIRY. "
+ "Returning bogus response.\n");
+ memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n");
+ return alauda_check_media(us);
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ unsigned int num_zones;
+ unsigned long capacity;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+
+ capacity = num_zones * MEDIA_INFO(us).uzonesize
+ * MEDIA_INFO(us).blocksize;
+
+ /* Report capacity and page size */
+ ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(512);
+
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_10) {
+ unsigned int page, pages;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n",
+ page, pages);
+
+ return alauda_read_data(us, page, pages);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ unsigned int page, pages;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n",
+ page, pages);
+
+ return alauda_write_data(us, page, pages);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ US_DEBUGP("alauda_transport: REQUEST_SENSE.\n");
+
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ /* sure. whatever. not like we can stop the user from popping
+ the media out of the device (no locking doors, etc) */
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h
new file mode 100644
index 00000000000..a700f87d080
--- /dev/null
+++ b/drivers/usb/storage/alauda.h
@@ -0,0 +1,100 @@
+/*
+ * Driver for Alauda-based card readers
+ *
+ * Current development and maintenance by:
+ * (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * See alauda.c for more explanation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _USB_ALAUDA_H
+#define _USB_ALAUDA_H
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR 0x01
+#define ALAUDA_STATUS_READY 0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS 0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS 0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG 0x86
+#define ALAUDA_GET_SM_MEDIA_SIG 0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD 0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA 0x85
+#define ALAUDA_BULK_READ_BLOCK 0x94
+#define ALAUDA_BULK_ERASE_BLOCK 0xa3
+#define ALAUDA_BULK_WRITE_BLOCK 0xb4
+#define ALAUDA_BULK_GET_STATUS2 0xb7
+#define ALAUDA_BULK_RESET_MEDIA 0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD 0x00
+#define ALAUDA_PORT_SM 0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF 0xffff
+#define SPARE 0xfffe
+#define UNUSABLE 0xfffd
+
+int init_alauda(struct us_data *us);
+int alauda_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+struct alauda_media_info {
+ unsigned long capacity; /* total media size in bytes */
+ unsigned int pagesize; /* page size in bytes */
+ unsigned int blocksize; /* number of pages per block */
+ unsigned int uzonesize; /* number of usable blocks per zone */
+ unsigned int zonesize; /* number of blocks per zone */
+ unsigned int blockmask; /* mask to get page from address */
+
+ unsigned char pageshift;
+ unsigned char blockshift;
+ unsigned char zoneshift;
+
+ u16 **lba_to_pba; /* logical to physical block map */
+ u16 **pba_to_lba; /* physical to logical block map */
+};
+
+struct alauda_info {
+ struct alauda_media_info port[2];
+ int wr_ep; /* endpoint to write data out of */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+#endif
+
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
index 5a9321705a7..01e430654a1 100644
--- a/drivers/usb/storage/debug.c
+++ b/drivers/usb/storage/debug.c
@@ -132,6 +132,7 @@ void usb_stor_show_command(struct scsi_cmnd *srb)
case 0x5C: what = "READ BUFFER CAPACITY"; break;
case 0x5D: what = "SEND CUE SHEET"; break;
case GPCMD_BLANK: what = "BLANK"; break;
+ case REPORT_LUNS: what = "REPORT LUNS"; break;
case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
case READ_12: what = "READ_12"; break;
case WRITE_12: what = "WRITE_12"; break;
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 7372386f33d..4c1b2bd2e2e 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -45,10 +45,6 @@
* mode */
int usb_stor_euscsi_init(struct us_data *us);
-#ifdef CONFIG_USB_STORAGE_SDDR09
-int sddr09_init(struct us_data *us);
-#endif
-
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
new file mode 100644
index 00000000000..b28151d1b60
--- /dev/null
+++ b/drivers/usb/storage/libusual.c
@@ -0,0 +1,266 @@
+/*
+ * libusual
+ *
+ * The libusual contains the table of devices common for ub and usb-storage.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/vmalloc.h>
+
+/*
+ */
+#define USU_MOD_FL_THREAD 1 /* Thread is running */
+#define USU_MOD_FL_PRESENT 2 /* The module is loaded */
+
+struct mod_status {
+ unsigned long fls;
+};
+
+static struct mod_status stat[3];
+static DEFINE_SPINLOCK(usu_lock);
+
+/*
+ */
+#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR
+static atomic_t usu_bias = ATOMIC_INIT(USB_US_DEFAULT_BIAS);
+
+#define BIAS_NAME_SIZE (sizeof("usb-storage"))
+static const char *bias_names[3] = { "none", "usb-storage", "ub" };
+
+static DECLARE_MUTEX_LOCKED(usu_init_notify);
+static DECLARE_COMPLETION(usu_end_notify);
+static atomic_t total_threads = ATOMIC_INIT(0);
+
+static int usu_probe_thread(void *arg);
+
+/*
+ * The table.
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName,useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+ .driver_info = ((useType)<<24) }
+
+struct usb_device_id storage_usb_ids [] = {
+# include "unusual_devs.h"
+ { } /* Terminating entry */
+};
+
+#undef USUAL_DEV
+#undef UNUSUAL_DEV
+
+MODULE_DEVICE_TABLE(usb, storage_usb_ids);
+EXPORT_SYMBOL_GPL(storage_usb_ids);
+
+/*
+ * @type: the module type as an integer
+ */
+void usb_usual_set_present(int type)
+{
+ struct mod_status *st;
+ unsigned long flags;
+
+ if (type <= 0 || type >= 3)
+ return;
+ st = &stat[type];
+ spin_lock_irqsave(&usu_lock, flags);
+ st->fls |= USU_MOD_FL_PRESENT;
+ spin_unlock_irqrestore(&usu_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_usual_set_present);
+
+void usb_usual_clear_present(int type)
+{
+ struct mod_status *st;
+ unsigned long flags;
+
+ if (type <= 0 || type >= 3)
+ return;
+ st = &stat[type];
+ spin_lock_irqsave(&usu_lock, flags);
+ st->fls &= ~USU_MOD_FL_PRESENT;
+ spin_unlock_irqrestore(&usu_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_usual_clear_present);
+
+/*
+ * Match the calling driver type against the table.
+ * Returns: 0 if the device matches.
+ */
+int usb_usual_check_type(const struct usb_device_id *id, int caller_type)
+{
+ int id_type = USB_US_TYPE(id->driver_info);
+
+ if (caller_type <= 0 || caller_type >= 3)
+ return -EINVAL;
+
+ /* Drivers grab fixed assignment devices */
+ if (id_type == caller_type)
+ return 0;
+ /* Drivers grab devices biased to them */
+ if (id_type == USB_US_TYPE_NONE && caller_type == atomic_read(&usu_bias))
+ return 0;
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usb_usual_check_type);
+
+/*
+ */
+static int usu_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int type;
+ int rc;
+ unsigned long flags;
+
+ type = USB_US_TYPE(id->driver_info);
+ if (type == 0)
+ type = atomic_read(&usu_bias);
+
+ spin_lock_irqsave(&usu_lock, flags);
+ if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) {
+ spin_unlock_irqrestore(&usu_lock, flags);
+ return -ENXIO;
+ }
+ stat[type].fls |= USU_MOD_FL_THREAD;
+ spin_unlock_irqrestore(&usu_lock, flags);
+
+ rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM);
+ if (rc < 0) {
+ printk(KERN_WARNING "libusual: "
+ "Unable to start the thread for %s: %d\n",
+ bias_names[type], rc);
+ spin_lock_irqsave(&usu_lock, flags);
+ stat[type].fls &= ~USU_MOD_FL_THREAD;
+ spin_unlock_irqrestore(&usu_lock, flags);
+ return rc; /* Not being -ENXIO causes a message printed */
+ }
+ atomic_inc(&total_threads);
+
+ return -ENXIO;
+}
+
+static void usu_disconnect(struct usb_interface *intf)
+{
+ ; /* We should not be here. */
+}
+
+static struct usb_driver usu_driver = {
+ .name = "libusual",
+ .probe = usu_probe,
+ .disconnect = usu_disconnect,
+ .id_table = storage_usb_ids,
+};
+
+/*
+ * A whole new thread for a purpose of request_module seems quite stupid.
+ * The request_module forks once inside again. However, if we attempt
+ * to load a storage module from our own modprobe thread, that module
+ * references our symbols, which cannot be resolved until our module is
+ * initialized. I wish there was a way to wait for the end of initialization.
+ * The module notifier reports MODULE_STATE_COMING only.
+ * So, we wait until module->init ends as the next best thing.
+ */
+static int usu_probe_thread(void *arg)
+{
+ int type = (unsigned long) arg;
+ struct mod_status *st = &stat[type];
+ int rc;
+ unsigned long flags;
+
+ daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */
+
+ /* A completion does not work here because it's counted. */
+ down(&usu_init_notify);
+ up(&usu_init_notify);
+
+ rc = request_module(bias_names[type]);
+ spin_lock_irqsave(&usu_lock, flags);
+ if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) {
+ /*
+ * This should not happen, but let us keep tabs on it.
+ */
+ printk(KERN_NOTICE "libusual: "
+ "modprobe for %s succeeded, but module is not present\n",
+ bias_names[type]);
+ }
+ st->fls &= ~USU_MOD_FL_THREAD;
+ spin_unlock_irqrestore(&usu_lock, flags);
+
+ complete_and_exit(&usu_end_notify, 0);
+}
+
+/*
+ */
+static int __init usb_usual_init(void)
+{
+ int rc;
+
+ rc = usb_register(&usu_driver);
+ up(&usu_init_notify);
+ return rc;
+}
+
+static void __exit usb_usual_exit(void)
+{
+ /*
+ * We do not check for any drivers present, because
+ * they keep us pinned with symbol references.
+ */
+
+ usb_deregister(&usu_driver);
+
+ while (atomic_read(&total_threads) > 0) {
+ wait_for_completion(&usu_end_notify);
+ atomic_dec(&total_threads);
+ }
+}
+
+/*
+ * Validate and accept the bias parameter.
+ */
+static int usu_set_bias(const char *bias_s, struct kernel_param *kp)
+{
+ int i;
+ int len;
+ int bias_n = 0;
+
+ len = strlen(bias_s);
+ if (len == 0)
+ return -EDOM;
+ if (bias_s[len-1] == '\n')
+ --len;
+
+ for (i = 1; i < 3; i++) {
+ if (strncmp(bias_s, bias_names[i], len) == 0) {
+ bias_n = i;
+ break;
+ }
+ }
+ if (bias_n == 0)
+ return -EINVAL;
+
+ atomic_set(&usu_bias, bias_n);
+ return 0;
+}
+
+static int usu_get_bias(char *buffer, struct kernel_param *kp)
+{
+ return strlen(strcpy(buffer, bias_names[atomic_read(&usu_bias)]));
+}
+
+module_init(usb_usual_init);
+module_exit(usb_usual_exit);
+
+module_param_call(bias, usu_set_bias, usu_get_bias, NULL, S_IRUGO|S_IWUSR);
+__MODULE_PARM_TYPE(bias, "string");
+MODULE_PARM_DESC(bias, "Bias to usb-storage or ub");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 89401a59f95..55ee2d36d58 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -52,6 +52,7 @@ struct usb_onetouch {
struct urb *irq; /* urb for interrupt in report */
unsigned char *data; /* input data */
dma_addr_t data_dma;
+ unsigned int is_open:1;
};
static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs)
@@ -89,6 +90,7 @@ static int usb_onetouch_open(struct input_dev *dev)
{
struct usb_onetouch *onetouch = dev->private;
+ onetouch->is_open = 1;
onetouch->irq->dev = onetouch->udev;
if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
err("usb_submit_urb failed");
@@ -103,8 +105,30 @@ static void usb_onetouch_close(struct input_dev *dev)
struct usb_onetouch *onetouch = dev->private;
usb_kill_urb(onetouch->irq);
+ onetouch->is_open = 0;
}
+#ifdef CONFIG_PM
+static void usb_onetouch_pm_hook(struct us_data *us, int action)
+{
+ struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;
+
+ if (onetouch->is_open) {
+ switch (action) {
+ case US_SUSPEND:
+ usb_kill_urb(onetouch->irq);
+ break;
+ case US_RESUME:
+ if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
+ err("usb_submit_urb failed");
+ break;
+ default:
+ break;
+ }
+ }
+}
+#endif /* CONFIG_PM */
+
int onetouch_connect_input(struct us_data *ss)
{
struct usb_device *udev = ss->pusb_dev;
@@ -185,6 +209,9 @@ int onetouch_connect_input(struct us_data *ss)
ss->extra_destructor = onetouch_release_input;
ss->extra = onetouch;
+#ifdef CONFIG_PM
+ ss->suspend_resume_hook = usb_onetouch_pm_hook;
+#endif
input_register_device(onetouch->dev);
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index 02bff01ab09..845bed4b803 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -41,20 +41,6 @@
#ifndef _PROTOCOL_H_
#define _PROTOCOL_H_
-/* Sub Classes */
-
-#define US_SC_RBC 0x01 /* Typically, flash devices */
-#define US_SC_8020 0x02 /* CD-ROM */
-#define US_SC_QIC 0x03 /* QIC-157 Tapes */
-#define US_SC_UFI 0x04 /* Floppy */
-#define US_SC_8070 0x05 /* Removable media */
-#define US_SC_SCSI 0x06 /* Transparent */
-#define US_SC_ISD200 0x07 /* ISD200 ATA */
-#define US_SC_MIN US_SC_RBC
-#define US_SC_MAX US_SC_ISD200
-
-#define US_SC_DEVICE 0xff /* Use device's value */
-
/* Protocol handling routines */
extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*);
extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*);
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 0ea2f5ab66b..fb8bacaae27 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -133,13 +133,11 @@ static struct nand_flash_dev nand_flash_ids[] = {
{ 0,}
};
-#define SIZE(a) (sizeof(a)/sizeof((a)[0]))
-
static struct nand_flash_dev *
nand_find_id(unsigned char id) {
int i;
- for (i = 0; i < SIZE(nand_flash_ids); i++)
+ for (i = 0; i < ARRAY_SIZE(nand_flash_ids); i++)
if (nand_flash_ids[i].model_id == id)
return &(nand_flash_ids[i]);
return NULL;
@@ -214,6 +212,20 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
* The actual driver starts here.
*/
+struct sddr09_card_info {
+ unsigned long capacity; /* Size of card in bytes */
+ int pagesize; /* Size of page in bytes */
+ int pageshift; /* log2 of pagesize */
+ int blocksize; /* Size of block in pages */
+ int blockshift; /* log2 of blocksize */
+ int blockmask; /* 2^blockshift - 1 */
+ int *lba_to_pba; /* logical to physical map */
+ int *pba_to_lba; /* physical to logical map */
+ int lbact; /* number of available pages */
+ int flags;
+#define SDDR09_WP 1 /* write protected */
+};
+
/*
* On my 16MB card, control blocks have size 64 (16 real control bytes,
* and 48 junk bytes). In reality of course the card uses 16 control bytes,
@@ -237,7 +249,7 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
#define SPARE 0xfffffffe
#define UNUSABLE 0xfffffffd
-static int erase_bad_lba_entries = 0;
+static const int erase_bad_lba_entries = 0;
/* send vendor interface command (0x41) */
/* called for requests 0, 1, 8 */
@@ -260,8 +272,11 @@ sddr09_send_command(struct us_data *us,
rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype,
0, 0, xfer_data, xfer_len);
- return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD :
- USB_STOR_TRANSPORT_ERROR);
+ switch (rc) {
+ case USB_STOR_XFER_GOOD: return 0;
+ case USB_STOR_XFER_STALLED: return -EPIPE;
+ default: return -EIO;
+ }
}
static int
@@ -308,20 +323,12 @@ sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
command[4] = buflen;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("request sense failed\n");
+ if (result)
return result;
- }
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
sensebuf, buflen, NULL);
- if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("request sense bulk in failed\n");
- return USB_STOR_TRANSPORT_ERROR;
- } else {
- US_DEBUGP("request sense worked\n");
- return USB_STOR_TRANSPORT_GOOD;
- }
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
/*
@@ -369,7 +376,7 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_read2%d %d\n",
x, result);
return result;
@@ -381,9 +388,9 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n",
x, result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
/*
@@ -497,7 +504,7 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) {
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
US_DEBUGP("Result for send_control in sddr09_erase %d\n",
result);
@@ -555,7 +562,7 @@ sddr09_writeX(struct us_data *us,
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_writeX %d\n",
result);
return result;
@@ -567,9 +574,9 @@ sddr09_writeX(struct us_data *us,
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n",
result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
/* erase address, write same address */
@@ -633,7 +640,7 @@ sddr09_read_sg_test_only(struct us_data *us) {
result = sddr09_send_scsi_command(us, command, 4*nsg+3);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_read_sg %d\n",
result);
return result;
@@ -641,7 +648,7 @@ sddr09_read_sg_test_only(struct us_data *us) {
buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO);
if (!buf)
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
buf, bulklen, NULL);
@@ -649,10 +656,10 @@ sddr09_read_sg_test_only(struct us_data *us) {
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n",
result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
#endif
@@ -681,14 +688,13 @@ sddr09_read_status(struct us_data *us, unsigned char *status) {
command[1] = LUNBITS;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
data, 64, NULL);
*status = data[0];
- return (result == USB_STOR_XFER_GOOD ?
- USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
static int
@@ -703,6 +709,13 @@ sddr09_read_data(struct us_data *us,
unsigned int len, index, offset;
int result;
+ // Figure out the initial LBA and page
+ lba = address >> info->blockshift;
+ page = (address & info->blockmask);
+ maxlba = info->capacity >> (info->pageshift + info->blockshift);
+ if (lba >= maxlba)
+ return -EIO;
+
// Since we only read in one block at a time, we have to create
// a bounce buffer and move the data a piece at a time between the
// bounce buffer and the actual transfer buffer.
@@ -711,18 +724,13 @@ sddr09_read_data(struct us_data *us,
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL) {
printk("sddr09_read_data: Out of memory\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
- // Figure out the initial LBA and page
- lba = address >> info->blockshift;
- page = (address & info->blockmask);
- maxlba = info->capacity >> (info->pageshift + info->blockshift);
-
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
- result = USB_STOR_TRANSPORT_GOOD;
+ result = 0;
index = offset = 0;
while (sectors > 0) {
@@ -735,7 +743,7 @@ sddr09_read_data(struct us_data *us,
if (lba >= maxlba) {
US_DEBUGP("Error: Requested lba %u exceeds "
"maximum %u\n", lba, maxlba);
- result = USB_STOR_TRANSPORT_ERROR;
+ result = -EIO;
break;
}
@@ -749,7 +757,7 @@ sddr09_read_data(struct us_data *us,
/* This is not really an error. It just means
that the block has never been written.
- Instead of returning USB_STOR_TRANSPORT_ERROR
+ Instead of returning an error
it is better to return all zero data. */
memset(buffer, 0, len);
@@ -764,7 +772,7 @@ sddr09_read_data(struct us_data *us,
result = sddr09_read20(us, address>>1,
pages, info->pageshift, buffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
break;
}
@@ -830,7 +838,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
pba = sddr09_find_unused_pba(info, lba);
if (!pba) {
printk("sddr09_write_lba: Out of unused blocks\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOSPC;
}
info->pba_to_lba[pba] = lba;
info->lba_to_pba[lba] = pba;
@@ -841,7 +849,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
/* Maybe it is impossible to write to PBA 1.
Fake success, but don't do anything. */
printk("sddr09: avoid writing to pba 1\n");
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
@@ -850,7 +858,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
address = (pba << (info->pageshift + info->blockshift));
result = sddr09_read22(us, address>>1, info->blocksize,
info->pageshift, blockbuffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
/* check old contents and fill lba */
@@ -897,7 +905,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
{
unsigned char status = 0;
int result2 = sddr09_read_status(us, &status);
- if (result2 != USB_STOR_TRANSPORT_GOOD)
+ if (result2)
US_DEBUGP("sddr09_write_inplace: cannot read status\n");
else if (status != 0xc0)
US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n",
@@ -920,13 +928,20 @@ sddr09_write_data(struct us_data *us,
unsigned int sectors) {
struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
- unsigned int lba, page, pages;
+ unsigned int lba, maxlba, page, pages;
unsigned int pagelen, blocklen;
unsigned char *blockbuffer;
unsigned char *buffer;
unsigned int len, index, offset;
int result;
+ // Figure out the initial LBA and page
+ lba = address >> info->blockshift;
+ page = (address & info->blockmask);
+ maxlba = info->capacity >> (info->pageshift + info->blockshift);
+ if (lba >= maxlba)
+ return -EIO;
+
// blockbuffer is used for reading in the old data, overwriting
// with the new data, and performing ECC calculations
@@ -938,7 +953,7 @@ sddr09_write_data(struct us_data *us,
blockbuffer = kmalloc(blocklen, GFP_NOIO);
if (!blockbuffer) {
printk("sddr09_write_data: Out of memory\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
// Since we don't write the user data directly to the device,
@@ -950,14 +965,10 @@ sddr09_write_data(struct us_data *us,
if (buffer == NULL) {
printk("sddr09_write_data: Out of memory\n");
kfree(blockbuffer);
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
- // Figure out the initial LBA and page
- lba = address >> info->blockshift;
- page = (address & info->blockmask);
-
- result = USB_STOR_TRANSPORT_GOOD;
+ result = 0;
index = offset = 0;
while (sectors > 0) {
@@ -967,13 +978,21 @@ sddr09_write_data(struct us_data *us,
pages = min(sectors, info->blocksize - page);
len = (pages << info->pageshift);
+ /* Not overflowing capacity? */
+ if (lba >= maxlba) {
+ US_DEBUGP("Error: Requested lba %u exceeds "
+ "maximum %u\n", lba, maxlba);
+ result = -EIO;
+ break;
+ }
+
// Get the data from the transfer buffer
usb_stor_access_xfer_buf(buffer, len, us->srb,
&index, &offset, FROM_XFER_BUF);
result = sddr09_write_lba(us, lba, page, pages,
buffer, blockbuffer);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
break;
page = 0;
@@ -1022,7 +1041,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
command[1] = LUNBITS;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
@@ -1031,8 +1050,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
for (i = 0; i < 4; i++)
deviceID[i] = content[i];
- return (result == USB_STOR_XFER_GOOD ?
- USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
static int
@@ -1041,7 +1059,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
unsigned char status;
result = sddr09_read_status(us, &status);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_get_wp: read_status fails\n");
return result;
}
@@ -1057,7 +1075,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
if (status & 0x1)
US_DEBUGP(" Error");
US_DEBUGP("\n");
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
#if 0
@@ -1089,7 +1107,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
result = sddr09_read_deviceID(us, deviceID);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result of read_deviceID is %d\n", result);
printk("sddr09: could not read card info\n");
return NULL;
@@ -1200,7 +1218,7 @@ sddr09_read_map(struct us_data *us) {
us, address>>1,
min(alloc_blocks, numblocks - i),
buffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
result = -1;
goto done;
}
@@ -1342,29 +1360,53 @@ sddr09_card_info_destructor(void *extra) {
kfree(info->pba_to_lba);
}
-static void
-sddr09_init_card_info(struct us_data *us) {
- if (!us->extra) {
- us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
- if (us->extra) {
- memset(us->extra, 0, sizeof(struct sddr09_card_info));
- us->extra_destructor = sddr09_card_info_destructor;
- }
+static int
+sddr09_common_init(struct us_data *us) {
+ int result;
+
+ /* set the configuration -- STALL is an acceptable response here */
+ if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
+ US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
+ ->actconfig->desc.bConfigurationValue);
+ return -EINVAL;
+ }
+
+ result = usb_reset_configuration(us->pusb_dev);
+ US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
+ if (result == -EPIPE) {
+ US_DEBUGP("-- stall on control interface\n");
+ } else if (result != 0) {
+ /* it's not a stall, but another error -- time to bail */
+ US_DEBUGP("-- Unknown error. Rejecting device\n");
+ return -EINVAL;
}
+
+ us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = sddr09_card_info_destructor;
+
+ nand_init_ecc();
+ return 0;
}
+
/*
* This is needed at a very early stage. If this is not listed in the
* unusual devices list but called from here then LUN 0 of the combo reader
* is not recognized. But I do not know what precisely these calls do.
*/
int
-sddr09_init(struct us_data *us) {
+usb_stor_sddr09_dpcm_init(struct us_data *us) {
int result;
unsigned char *data = us->iobuf;
+ result = sddr09_common_init(us);
+ if (result)
+ return result;
+
result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_init: send_command fails\n");
return result;
}
@@ -1373,7 +1415,7 @@ sddr09_init(struct us_data *us) {
// get 07 02
result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_init: 2nd send_command fails\n");
return result;
}
@@ -1382,7 +1424,7 @@ sddr09_init(struct us_data *us) {
// get 07 00
result = sddr09_request_sense(us, data, 18);
- if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) {
+ if (result == 0 && data[2] != 0) {
int j;
for (j=0; j<18; j++)
printk(" %02X", data[j]);
@@ -1398,7 +1440,7 @@ sddr09_init(struct us_data *us) {
// test unit ready
- return USB_STOR_TRANSPORT_GOOD; /* not result */
+ return 0; /* not result */
}
/*
@@ -1427,13 +1469,6 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
};
info = (struct sddr09_card_info *)us->extra;
- if (!info) {
- nand_init_ecc();
- sddr09_init_card_info(us);
- info = (struct sddr09_card_info *)us->extra;
- if (!info)
- return USB_STOR_TRANSPORT_ERROR;
- }
if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
/* for a faked command, we have to follow with a faked sense */
@@ -1536,7 +1571,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("READ_10: read page %d pagect %d\n",
page, pages);
- return sddr09_read_data(us, page, pages);
+ result = sddr09_read_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
}
if (srb->cmnd[0] == WRITE_10) {
@@ -1549,7 +1586,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("WRITE_10: write page %d pagect %d\n",
page, pages);
- return sddr09_write_data(us, page, pages);
+ result = sddr09_write_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
}
/* catch-all for all other commands, except
@@ -1575,10 +1614,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("SDDR09: Send control for command %s\n", ptr);
result = sddr09_send_scsi_command(us, srb->cmnd, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_transport: sddr09_send_scsi_command "
"returns %d\n", result);
- return result;
+ return USB_STOR_TRANSPORT_ERROR;
}
if (srb->request_bufflen == 0)
@@ -1606,3 +1645,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_GOOD;
}
+/*
+ * Initialization routine for the sddr09 subdriver
+ */
+int
+usb_stor_sddr09_init(struct us_data *us) {
+ return sddr09_common_init(us);
+}
diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h
index c9d78d6188b..c03089a9ec3 100644
--- a/drivers/usb/storage/sddr09.h
+++ b/drivers/usb/storage/sddr09.h
@@ -31,18 +31,7 @@
extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
-struct sddr09_card_info {
- unsigned long capacity; /* Size of card in bytes */
- int pagesize; /* Size of page in bytes */
- int pageshift; /* log2 of pagesize */
- int blocksize; /* Size of block in pages */
- int blockshift; /* log2 of blocksize */
- int blockmask; /* 2^blockshift - 1 */
- int *lba_to_pba; /* logical to physical map */
- int *pba_to_lba; /* physical to logical map */
- int lbact; /* number of available pages */
- int flags;
-#define SDDR09_WP 1 /* write protected */
-};
+extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
+extern int usb_stor_sddr09_init(struct us_data *us);
#endif
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 0a362cc781a..633a715850a 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -41,39 +41,8 @@
#ifndef _TRANSPORT_H_
#define _TRANSPORT_H_
-#include <linux/config.h>
#include <linux/blkdev.h>
-/* Protocols */
-
-#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
-#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
-#define US_PR_BULK 0x50 /* bulk only */
-#ifdef CONFIG_USB_STORAGE_USBAT
-#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
-#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
-#endif
-#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-#define US_PR_FREECOM 0xf1 /* Freecom */
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
-#endif
-
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
-#endif
-
-#define US_PR_DEVICE 0xff /* Use device's value */
-
/*
* Bulk only data structures
*/
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index f5f47a34b16..dc301e567cf 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -79,13 +79,6 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
US_SC_8070, US_PR_USBAT, init_usbat, 0),
#endif
-/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
-UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
- "VIA Technologies Inc.",
- "USB 2.0 Card Reader",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
@@ -96,6 +89,13 @@ UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
+/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
+UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
+ "VIA Technologies Inc.",
+ "USB 2.0 Card Reader",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
@@ -187,6 +187,14 @@ UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
+UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
+ "NIKON",
+ "NIKON DSC E2000",
+ US_SC_DEVICE, US_PR_DEVICE,NULL,
+ US_FL_NOT_LOCKABLE ),
+
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
* Frank Copeland <fjc@thingy.apana.org.au> */
@@ -276,14 +284,14 @@ UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR09",
- US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
- US_FL_SINGLE_LUN ),
+ US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ 0),
/* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter",
- US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
+ US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
0),
#endif
@@ -527,6 +535,13 @@ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
"Silicon Media R/W",
US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
+ "Fujifilm",
+ "DPC-R1 (Alauda)",
+ US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
+#endif
+
/* Fabrizio Fellini <fello@libero.it> */
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Fujifilm",
@@ -673,8 +688,8 @@ UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
"Olympus",
"Camedia MAUSB-2",
- US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
- US_FL_SINGLE_LUN ),
+ US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ 0),
#endif
/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
@@ -739,8 +754,8 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR-09",
- US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
- US_FL_SINGLE_LUN ),
+ US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ 0),
#endif
#ifdef CONFIG_USB_STORAGE_FREECOM
@@ -776,6 +791,13 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
+ "Olympus",
+ "MAUSB-10 (Alauda)",
+ US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
+#endif
+
#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
"Datafab",
@@ -1134,3 +1156,27 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
US_SC_SCSI, US_PR_SDDR55, NULL,
US_FL_SINGLE_LUN),
#endif
+
+/* Control/Bulk transport for all SubClass values */
+USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
+
+/* Control/Bulk/Interrupt transport for all SubClass values */
+USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
+
+/* Bulk-only transport for all SubClass values */
+USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 3847ebed2aa..dbcf23980ff 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -94,6 +94,9 @@
#ifdef CONFIG_USB_STORAGE_ONETOUCH
#include "onetouch.h"
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+#include "alauda.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
@@ -112,49 +115,33 @@ static atomic_t total_threads = ATOMIC_INIT(0);
static DECLARE_COMPLETION(threads_gone);
-/* The entries in this table, except for final ones here
- * (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
- * line for line with the entries of us_unsuaul_dev_list[].
+/*
+ * The entries in this table correspond, line for line,
+ * with the entries of us_unusual_dev_list[].
*/
+#ifndef CONFIG_USB_LIBUSUAL
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName,useProtocol, useTransport, \
initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) }
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+ .driver_info = (USB_US_TYPE_STOR<<24) }
static struct usb_device_id storage_usb_ids [] = {
# include "unusual_devs.h"
#undef UNUSUAL_DEV
- /* Control/Bulk transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) },
-
- /* Control/Bulk/Interrupt transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) },
-
- /* Bulk-only transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
-
+#undef USUAL_DEV
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE (usb, storage_usb_ids);
+#endif /* CONFIG_USB_LIBUSUAL */
/* This is the list of devices we recognize, along with their flag data */
@@ -167,7 +154,6 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
* are free to use as many characters as you like.
*/
-#undef UNUSUAL_DEV
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
@@ -177,53 +163,18 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
- .flags = Flags, \
+}
+
+#define USUAL_DEV(use_protocol, use_transport, use_type) \
+{ \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
}
static struct us_unusual_dev us_unusual_dev_list[] = {
# include "unusual_devs.h"
# undef UNUSUAL_DEV
- /* Control/Bulk transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_CB},
-
- /* Control/Bulk/Interrupt transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_CBI},
-
- /* Bulk-only transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_BULK},
+# undef USUAL_DEV
/* Terminating entry */
{ NULL }
@@ -240,6 +191,8 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message)
down(&us->dev_semaphore);
US_DEBUGP("%s\n", __FUNCTION__);
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_SUSPEND);
iface->dev.power.power_state.event = message.event;
/* When runtime PM is working, we'll set a flag to indicate
@@ -256,6 +209,8 @@ static int storage_resume(struct usb_interface *iface)
down(&us->dev_semaphore);
US_DEBUGP("%s\n", __FUNCTION__);
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_RESUME);
iface->dev.power.power_state.event = PM_EVENT_ON;
up(&us->dev_semaphore);
@@ -484,14 +439,20 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
return 0;
}
+/* Find an unusual_dev descriptor (always succeeds in the current code) */
+static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
+{
+ const int id_index = id - storage_usb_ids;
+ return &us_unusual_dev_list[id_index];
+}
+
/* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, int id_index)
+static void get_device_info(struct us_data *us, const struct usb_device_id *id)
{
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc =
&us->pusb_intf->cur_altsetting->desc;
- struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index];
- struct usb_device_id *id = &storage_usb_ids[id_index];
+ struct us_unusual_dev *unusual_dev = find_unusual(id);
/* Store the entries */
us->unusual_dev = unusual_dev;
@@ -501,7 +462,7 @@ static void get_device_info(struct us_data *us, int id_index)
us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
- us->flags = unusual_dev->flags;
+ us->flags = USB_US_ORIG_FLAGS(id->driver_info);
/*
* This flag is only needed when we're in high-speed, so let's
@@ -516,7 +477,7 @@ static void get_device_info(struct us_data *us, int id_index)
* from the unusual_devs.h table.
*/
if (id->idVendor || id->idProduct) {
- static char *msgs[3] = {
+ static const char *msgs[3] = {
"an unneeded SubClass entry",
"an unneeded Protocol entry",
"unneeded SubClass and Protocol entries"};
@@ -529,7 +490,7 @@ static void get_device_info(struct us_data *us, int id_index)
if (unusual_dev->useTransport != US_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
- if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE))
+ if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x,%04x S %02x P %02x)"
" has %s in unusual_devs.h\n"
@@ -686,6 +647,15 @@ static int get_protocol(struct us_data *us)
break;
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+ case US_PR_ALAUDA:
+ us->transport_name = "Alauda Control/Bulk";
+ us->transport = alauda_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+ break;
+#endif
+
default:
return -EIO;
}
@@ -921,10 +891,12 @@ static int storage_probe(struct usb_interface *intf,
{
struct Scsi_Host *host;
struct us_data *us;
- const int id_index = id - storage_usb_ids;
int result;
struct task_struct *th;
+ if (usb_usual_check_type(id, USB_US_TYPE_STOR))
+ return -ENXIO;
+
US_DEBUGP("USB Mass Storage device detected\n");
/*
@@ -957,29 +929,7 @@ static int storage_probe(struct usb_interface *intf,
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
- get_device_info(us, id_index);
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
- if (us->protocol == US_PR_EUSB_SDDR09 ||
- us->protocol == US_PR_DPCM_USB) {
- /* set the configuration -- STALL is an acceptable response here */
- if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
- US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
- ->actconfig->desc.bConfigurationValue);
- goto BadDevice;
- }
- result = usb_reset_configuration(us->pusb_dev);
-
- US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
- if (result == -EPIPE) {
- US_DEBUGP("-- stall on control interface\n");
- } else if (result != 0) {
- /* it's not a stall, but another error -- time to bail */
- US_DEBUGP("-- Unknown error. Rejecting device\n");
- goto BadDevice;
- }
- }
-#endif
+ get_device_info(us, id);
/* Get the transport, protocol, and pipe settings */
result = get_transport(us);
@@ -1044,7 +994,6 @@ static void storage_disconnect(struct usb_interface *intf)
***********************************************************************/
static struct usb_driver usb_storage_driver = {
- .owner = THIS_MODULE,
.name = "usb-storage",
.probe = storage_probe,
.disconnect = storage_disconnect,
@@ -1062,9 +1011,10 @@ static int __init usb_stor_init(void)
/* register the driver, return usb_register return code if error */
retval = usb_register(&usb_storage_driver);
- if (retval == 0)
+ if (retval == 0) {
printk(KERN_INFO "USB Mass Storage support registered.\n");
-
+ usb_usual_set_present(USB_US_TYPE_STOR);
+ }
return retval;
}
@@ -1088,6 +1038,8 @@ static void __exit usb_stor_exit(void)
wait_for_completion(&threads_gone);
atomic_dec(&total_threads);
}
+
+ usb_usual_clear_present(USB_US_TYPE_STOR);
}
module_init(usb_stor_init);
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 98b09711a73..7259fd1f6b0 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -45,6 +45,7 @@
#define _USB_H_
#include <linux/usb.h>
+#include <linux/usb_usual.h>
#include <linux/blkdev.h>
#include <linux/smp_lock.h>
#include <linux/completion.h>
@@ -63,38 +64,8 @@ struct us_unusual_dev {
__u8 useProtocol;
__u8 useTransport;
int (*initFunction)(struct us_data *);
- unsigned int flags;
};
-/*
- * Static flag definitions. We use this roundabout technique so that the
- * proc_info() routine can automatically display a message for each flag.
- */
-#define US_DO_ALL_FLAGS \
- US_FLAG(SINGLE_LUN, 0x00000001) \
- /* allow access to only LUN 0 */ \
- US_FLAG(NEED_OVERRIDE, 0x00000002) \
- /* unusual_devs entry is necessary */ \
- US_FLAG(SCM_MULT_TARG, 0x00000004) \
- /* supports multiple targets */ \
- US_FLAG(FIX_INQUIRY, 0x00000008) \
- /* INQUIRY response needs faking */ \
- US_FLAG(FIX_CAPACITY, 0x00000010) \
- /* READ CAPACITY response too big */ \
- US_FLAG(IGNORE_RESIDUE, 0x00000020) \
- /* reported residue is wrong */ \
- US_FLAG(BULK32, 0x00000040) \
- /* Uses 32-byte CBW length */ \
- US_FLAG(NOT_LOCKABLE, 0x00000080) \
- /* PREVENT/ALLOW not supported */ \
- US_FLAG(GO_SLOW, 0x00000100) \
- /* Need delay after Command phase */ \
- US_FLAG(NO_WP_DETECT, 0x00000200) \
- /* Don't check for write-protect */ \
-
-#define US_FLAG(name, value) US_FL_##name = value ,
-enum { US_DO_ALL_FLAGS };
-#undef US_FLAG
/* Dynamic flag definitions: used in set_bit() etc. */
#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */
@@ -122,7 +93,11 @@ enum { US_DO_ALL_FLAGS };
typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
typedef int (*trans_reset)(struct us_data*);
typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
-typedef void (*extra_data_destructor)(void *); /* extra data destructor */
+typedef void (*extra_data_destructor)(void *); /* extra data destructor */
+typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
+
+#define US_SUSPEND 0
+#define US_RESUME 1
/* we allocate one of these for every device that we remember */
struct us_data {
@@ -178,6 +153,9 @@ struct us_data {
/* subdriver information */
void *extra; /* Any extra data */
extra_data_destructor extra_destructor;/* extra data destructor */
+#ifdef CONFIG_PM
+ pm_hook suspend_resume_hook;
+#endif
};
/* Convert between us_data and the corresponding Scsi_Host */