diff options
author | bart.hartgers@gmail.com <bart.hartgers@gmail.com> | 2009-10-28 10:43:26 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-12-11 11:55:21 -0800 |
commit | f4c1e8d597d1a440175db0d709c921cf3a49cfe7 (patch) | |
tree | b65c8b7142afa92732915491af1211b7a91e92a9 /drivers/usb | |
parent | 149fc791a452df5e8fa155f553b3027a874adf62 (diff) |
USB: ark3116: Make existing functions 16450-aware and add close and release functions.
Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/serial/ark3116.c | 495 |
1 files changed, 276 insertions, 219 deletions
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5c947410c85..d12df948467 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -152,79 +152,105 @@ static inline void ARK3116_RCV_QUIET(struct usb_serial *serial, buf, 0x0000001, 1000); } +static inline int calc_divisor(int bps) +{ + /* Original ark3116 made some exceptions in rounding here + * because windows did the same. Assume that is not really + * necessary. + * Crystal is 12MHz, probably because of USB, but we divide by 4? + */ + return (12000000 + 2*bps) / (4*bps); +} + static int ark3116_attach(struct usb_serial *serial) { - char *buf; + struct usb_serial_port *port = serial->port[0]; + struct ark3116_private *priv; + + /* make sure we have our end-points */ + if ((serial->num_bulk_in == 0) || + (serial->num_bulk_out == 0) || + (serial->num_interrupt_in == 0)) { + dev_err(&serial->dev->dev, + "%s - missing endpoint - " + "bulk in: %d, bulk out: %d, int in %d\n", + KBUILD_MODNAME, + serial->num_bulk_in, + serial->num_bulk_out, + serial->num_interrupt_in); + return -EINVAL; + } - buf = kmalloc(1, GFP_KERNEL); - if (!buf) { - dbg("error kmalloc -> out of mem?"); + priv = kzalloc(sizeof(struct ark3116_private), + GFP_KERNEL); + if (!priv) return -ENOMEM; - } - if (is_irda(serial)) - dbg("IrDA mode"); + init_waitqueue_head(&priv->delta_msr_wait); + mutex_init(&priv->hw_lock); + spin_lock_init(&priv->status_lock); + + priv->irda = is_irda(serial); + + usb_set_serial_port_data(port, priv); - /* 3 */ - ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002); - ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001); - ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008); - ARK3116_SND(serial, 6, 0xFE, 0x40, is_irda(serial) ? 0x0001 : 0x0000, - 0x000B); + /* setup the hardware */ + ark3116_write_reg(serial, UART_IER, 0); + /* disable DMA */ + ark3116_write_reg(serial, UART_FCR, 0); + /* handshake control */ + priv->hcr = 0; + ark3116_write_reg(serial, 0x8 , 0); + /* modem control */ + priv->mcr = 0; + ark3116_write_reg(serial, UART_MCR, 0); - if (is_irda(serial)) { - ARK3116_SND(serial, 1001, 0xFE, 0x40, 0x0000, 0x000C); - ARK3116_SND(serial, 1002, 0xFE, 0x40, 0x0041, 0x000D); - ARK3116_SND(serial, 1003, 0xFE, 0x40, 0x0001, 0x000A); + if (!(priv->irda)) { + ark3116_write_reg(serial, 0xb , 0); + } else { + ark3116_write_reg(serial, 0xb , 1); + ark3116_write_reg(serial, 0xc , 0); + ark3116_write_reg(serial, 0xd , 0x41); + ark3116_write_reg(serial, 0xa , 1); } - /* <-- seq7 */ - ARK3116_RCV(serial, 7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); - ARK3116_SND(serial, 8, 0xFE, 0x40, 0x0080, 0x0003); - ARK3116_SND(serial, 9, 0xFE, 0x40, 0x001A, 0x0000); - ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001); - ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003); - - /* <-- seq12 */ - ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); - ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004); - - /* 14 */ - ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); - ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004); - - /* 16 */ - ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); - /* --> seq17 */ - ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004); - - /* <-- seq18 */ - ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf); - - /* --> seq19 */ - ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004); - - /* <-- seq20 */ - /* seems like serial port status info (RTS, CTS, ...) */ - /* returns modem control line status?! */ - ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf); - - /* set 9600 baud & do some init?! */ - ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003); - ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000); - ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001); - if (is_irda(serial)) - ARK3116_SND(serial, 1004, 0xFE, 0x40, 0x0000, 0x0009); - ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003); - ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); - ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003); - ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); - ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003); + /* setup baudrate */ + ark3116_write_reg(serial, UART_LCR, UART_LCR_DLAB); - kfree(buf); + /* setup for 9600 8N1 */ + priv->quot = calc_divisor(9600); + ark3116_write_reg(serial, UART_DLL, priv->quot & 0xff); + ark3116_write_reg(serial, UART_DLM, (priv->quot>>8) & 0xff); + + priv->lcr = UART_LCR_WLEN8; + ark3116_write_reg(serial, UART_LCR, UART_LCR_WLEN8); + + ark3116_write_reg(serial, 0xe, 0); + + if (priv->irda) + ark3116_write_reg(serial, 0x9, 0); + + dev_info(&serial->dev->dev, + "%s using %s mode\n", + KBUILD_MODNAME, + priv->irda ? "IrDA" : "RS232"); return 0; } +static void ark3116_release(struct usb_serial *serial) +{ + struct usb_serial_port *port = serial->port[0]; + struct ark3116_private *priv = usb_get_serial_port_data(port); + + /* device is closed, so URBs and DMA should be down */ + + usb_set_serial_port_data(port, NULL); + + mutex_destroy(&priv->hw_lock); + + kfree(priv); +} + static void ark3116_init_termios(struct tty_struct *tty) { struct ktermios *termios = tty->termios; @@ -240,200 +266,189 @@ static void ark3116_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; + struct ark3116_private *priv = usb_get_serial_port_data(port); struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; - int baud; - int ark3116_baud; - char *buf; - char config; - - config = 0; + int bps = tty_get_baud_rate(tty); + int quot; + __u8 lcr, hcr, eval; + + /* set data bit count */ + switch (cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + case CS8: + lcr = UART_LCR_WLEN8; + break; + } + if (cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (cflag & PARENB) + lcr |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + lcr |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + /* handshake control */ + hcr = (cflag & CRTSCTS) ? 0x03 : 0x00; + + /* calc baudrate */ + dbg("%s - setting bps to %d", __func__, bps); + eval = 0; + switch (bps) { + case 0: + quot = calc_divisor(9600); + break; + default: + if ((bps < 75) || (bps > 3000000)) + bps = 9600; + quot = calc_divisor(bps); + break; + case 460800: + eval = 1; + quot = calc_divisor(bps); + break; + case 921600: + eval = 2; + quot = calc_divisor(bps); + break; + } - dbg("%s - port %d", __func__, port->number); + /* Update state: synchronize */ + mutex_lock(&priv->hw_lock); + /* keep old LCR_SBC bit */ + lcr |= (priv->lcr & UART_LCR_SBC); - cflag = termios->c_cflag; - termios->c_cflag &= ~(CMSPAR|CRTSCTS); + dbg("%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d", + __func__, hcr, lcr, quot); - buf = kmalloc(1, GFP_KERNEL); - if (!buf) { - dbg("error kmalloc"); - *termios = *old_termios; - return; + /* handshake control */ + if (priv->hcr != hcr) { + priv->hcr = hcr; + ark3116_write_reg(serial, 0x8, hcr); } - /* set data bit count (8/7/6/5) */ - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS5: - config |= 0x00; - dbg("setting CS5"); - break; - case CS6: - config |= 0x01; - dbg("setting CS6"); - break; - case CS7: - config |= 0x02; - dbg("setting CS7"); - break; - default: - dbg("CSIZE was set but not CS5-CS8, using CS8!"); - /* fall through */ - case CS8: - config |= 0x03; - dbg("setting CS8"); - break; - } + /* baudrate */ + if (priv->quot != quot) { + priv->quot = quot; + priv->lcr = lcr; /* need to write lcr anyway */ + + /* disable DMA since transmit/receive is + * shadowed by UART_DLL + */ + ark3116_write_reg(serial, UART_FCR, 0); + + ark3116_write_reg(serial, UART_LCR, + lcr|UART_LCR_DLAB); + ark3116_write_reg(serial, UART_DLL, quot & 0xff); + ark3116_write_reg(serial, UART_DLM, (quot>>8) & 0xff); + + /* restore lcr */ + ark3116_write_reg(serial, UART_LCR, lcr); + /* magic baudrate thingy: not sure what it does, + * but windows does this as well. + */ + ark3116_write_reg(serial, 0xe, eval); + + /* enable DMA */ + ark3116_write_reg(serial, UART_FCR, UART_FCR_DMA_SELECT); + } else if (priv->lcr != lcr) { + priv->lcr = lcr; + ark3116_write_reg(serial, UART_LCR, lcr); } - /* set parity (NONE/EVEN/ODD) */ - if (cflag & PARENB) { - if (cflag & PARODD) { - config |= 0x08; - dbg("setting parity to ODD"); - } else { - config |= 0x18; - dbg("setting parity to EVEN"); - } - } else { - dbg("setting parity to NONE"); - } + mutex_unlock(&priv->hw_lock); - /* set stop bit (1/2) */ - if (cflag & CSTOPB) { - config |= 0x04; - dbg("setting 2 stop bits"); - } else { - dbg("setting 1 stop bit"); + /* check for software flow control */ + if (I_IXOFF(tty) || I_IXON(tty)) { + dev_warn(&serial->dev->dev, + "%s: don't know how to do software flow control\n", + KBUILD_MODNAME); } - /* set baudrate */ - baud = tty_get_baud_rate(tty); - - switch (baud) { - case 75: - case 150: - case 300: - case 600: - case 1200: - case 1800: - case 2400: - case 4800: - case 9600: - case 19200: - case 38400: - case 57600: - case 115200: - case 230400: - case 460800: - /* Report the resulting rate back to the caller */ - tty_encode_baud_rate(tty, baud, baud); - break; - /* set 9600 as default (if given baudrate is invalid for example) */ - default: - tty_encode_baud_rate(tty, 9600, 9600); - case 0: - baud = 9600; - } - - /* - * found by try'n'error, be careful, maybe there are other options - * for multiplicator etc! (3.5 for example) - */ - if (baud == 460800) - /* strange, for 460800 the formula is wrong - * if using round() then 9600baud is wrong) */ - ark3116_baud = 7; - else - ark3116_baud = 3000000 / baud; - - /* ? */ - ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf); - - /* offset = buf[0]; */ - /* offset = 0x03; */ - /* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */ - - /* set baudrate */ - dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud); - ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003); - ARK3116_SND(serial, 148, 0xFE, 0x40, - (ark3116_baud & 0x00FF), 0x0000); - ARK3116_SND(serial, 149, 0xFE, 0x40, - (ark3116_baud & 0xFF00) >> 8, 0x0001); - ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003); - - /* ? */ - ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); - ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003); - - /* set data bit count, stop bit count & parity: */ - dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config); - ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); - ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, bps, bps); +} - if (cflag & CRTSCTS) - dbg("CRTSCTS not supported by chipset?!"); +static void ark3116_close(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; - /* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */ + if (serial->dev) { + /* disable DMA */ + ark3116_write_reg(serial, UART_FCR, 0); - kfree(buf); + /* deactivate interrupts */ + ark3116_write_reg(serial, UART_IER, 0); - return; + /* shutdown any bulk reads that might be going on */ + if (serial->num_bulk_out) + usb_kill_urb(port->write_urb); + if (serial->num_bulk_in) + usb_kill_urb(port->read_urb); + if (serial->num_interrupt_in) + usb_kill_urb(port->interrupt_in_urb); + } } static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; + struct ark3116_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; - char *buf; - int result = 0; - - dbg("%s - port %d", __func__, port->number); + unsigned char *buf; + int result; buf = kmalloc(1, GFP_KERNEL); - if (!buf) { - dbg("error kmalloc -> out of mem?"); + if (buf == NULL) return -ENOMEM; - } result = usb_serial_generic_open(tty, port); - if (result) + if (result) { + dbg("%s - usb_serial_generic_open failed: %d", + __func__, result); goto err_out; + } - /* open */ - ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf); - - ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003); - ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000); - ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001); - ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003); - - ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); - ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004); - - ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf); - ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004); - - ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf); + /* setup termios */ + if (tty) + ark3116_set_termios(tty, port, NULL); - ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004); + /* remove any data still left: also clears error state */ + ark3116_read_reg(serial, UART_RX, buf); - ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf); + /* read modem status */ + priv->msr = ark3116_read_reg(serial, UART_MSR, buf); + /* read line status */ + priv->lsr = ark3116_read_reg(serial, UART_LSR, buf); - ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "submit irq_in urb failed %d\n", + result); + ark3116_close(port); + goto err_out; + } - /* returns different values (control lines?!) */ - ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf); + /* activate interrupts */ + ark3116_write_reg(port->serial, UART_IER, UART_IER_MSI|UART_IER_RLSI); - /* initialise termios */ - if (tty) - ark3116_set_termios(tty, port, &tmp_termios); + /* enable DMA */ + ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT); err_out: kfree(buf); - return result; } @@ -441,6 +456,7 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; + struct ark3116_private *priv = usb_get_serial_port_data(port); struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; @@ -462,9 +478,48 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file, if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) return -EFAULT; return 0; - default: - dbg("%s cmd 0x%04x not supported", __func__, cmd); + case TIOCMIWAIT: + for (;;) { + struct async_icount prev = priv->icount; + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + if ((prev.rng == priv->icount.rng) && + (prev.dsr == priv->icount.dsr) && + (prev.dcd == priv->icount.dcd) && + (prev.cts == priv->icount.cts)) + return -EIO; + if ((arg & TIOCM_RNG && + (prev.rng != priv->icount.rng)) || + (arg & TIOCM_DSR && + (prev.dsr != priv->icount.dsr)) || + (arg & TIOCM_CD && + (prev.dcd != priv->icount.dcd)) || + (arg & TIOCM_CTS && + (prev.cts != priv->icount.cts))) + return 0; + } break; + case TIOCGICOUNT: { + struct serial_icounter_struct icount; + struct async_icount cnow = priv->icount; + memset(&icount, 0, sizeof(icount)); + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + if (copy_to_user(user_arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; + } } return -ENOIOCTLCMD; @@ -518,11 +573,13 @@ static struct usb_serial_driver ark3116_device = { .usb_driver = &ark3116_driver, .num_ports = 1, .attach = ark3116_attach, + .release = ark3116_release, .set_termios = ark3116_set_termios, .init_termios = ark3116_init_termios, .ioctl = ark3116_ioctl, .tiocmget = ark3116_tiocmget, .open = ark3116_open, + .close = ark3116_close, }; static int __init ark3116_init(void) |