more ACSI removal

This patch removes some code that became dead code after the ATARI_ACSI
removal.

It also indirectly fixes the following bug introduced by
commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6:

 config ATARI_SLM
        tristate "Atari SLM laser printer support"
-       depends on ATARI && ATARI_ACSI!=n
+       depends on ATARI

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

8 files changed, 0 insertions, 2623 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 6e23af1ecbd..95d6838c4ff 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -59,17 +59,6 @@ config AMIGA_Z2RAM
 	  To compile this driver as a module, choose M here: the
 	  module will be called z2ram.
 
-config ATARI_SLM
-	tristate "Atari SLM laser printer support"
-	depends on ATARI
-	help
-	  If you have an Atari SLM laser printer, say Y to include support for
-	  it in the kernel. Otherwise, say N. This driver is also available as
-	  a module ( = code which can be inserted in and removed from the
-	  running kernel whenever you want). The module will be called
-	  acsi_slm. Be warned: the driver needs much ST-RAM and can cause
-	  problems due to that fact!
-
 config BLK_DEV_XD
 	tristate "XT hard disk support"
 	depends on ISA && ISA_DMA_API
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index e5f98acc5d5..bba3119b28c 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o
 obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o
 obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o
 obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
-obj-$(CONFIG_ATARI_SLM)		+= acsi_slm.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= rd.o
 obj-$(CONFIG_BLK_DEV_LOOP)	+= loop.o
diff --git a/drivers/block/acsi_slm.c b/drivers/block/acsi_slm.c
deleted file mode 100644
index 1d9d9b4f48c..00000000000
--- a/drivers/block/acsi_slm.c
+++ /dev/null
@@ -1,1032 +0,0 @@
-/*
- * acsi_slm.c -- Device driver for the Atari SLM laser printer
- *
- * Copyright 1995 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- * 
- */
-
-/*
-
-Notes:
-
-The major number for SLM printers is 28 (like ACSI), but as a character
-device, not block device. The minor number is the number of the printer (if
-you have more than one SLM; currently max. 2 (#define-constant) SLMs are
-supported). The device can be opened for reading and writing. If reading it,
-you get some status infos (MODE SENSE data). Writing mode is used for the data
-to be printed. Some ioctls allow to get the printer status and to tune printer
-modes and some internal variables.
-
-A special problem of the SLM driver is the timing and thus the buffering of
-the print data. The problem is that all the data for one page must be present
-in memory when printing starts, else --when swapping occurs-- the timing could
-not be guaranteed. There are several ways to assure this:
-
- 1) Reserve a buffer of 1196k (maximum page size) statically by
-    atari_stram_alloc(). The data are collected there until they're complete,
-	and then printing starts. Since the buffer is reserved, no further
-	considerations about memory and swapping are needed. So this is the
-	simplest method, but it needs a lot of memory for just the SLM.
-
-    An striking advantage of this method is (supposed the SLM_CONT_CNT_REPROG
-	method works, see there), that there are no timing problems with the DMA
-	anymore.
-	
- 2) The other method would be to reserve the buffer dynamically each time
-    printing is required. I could think of looking at mem_map where the
-	largest unallocted ST-RAM area is, taking the area, and then extending it
-	by swapping out the neighbored pages, until the needed size is reached.
-	This requires some mm hacking, but seems possible. The only obstacle could
-	be pages that cannot be swapped out (reserved pages)...
-
- 3) Another possibility would be to leave the real data in user space and to
-    work with two dribble buffers of about 32k in the driver: While the one
-	buffer is DMAed to the SLM, the other can be filled with new data. But
-	to keep the timing, that requires that the user data remain in memory and
-	are not swapped out. Requires mm hacking, too, but maybe not so bad as
-	method 2).
-
-*/
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-#include <asm/atari_SLM.h>
-
-
-#undef	DEBUG
-
-/* Define this if the page data are continuous in physical memory. That
- * requires less reprogramming of the ST-DMA */
-#define	SLM_CONTINUOUS_DMA
-
-/* Use continuous reprogramming of the ST-DMA counter register. This is
- * --strictly speaking-- not allowed, Atari recommends not to look at the
- * counter register while a DMA is going on. But I don't know if that applies
- * only for reading the register, or also writing to it. Writing only works
- * fine for me... The advantage is that the timing becomes absolutely
- * uncritical: Just update each, say 200ms, the counter reg to its maximum,
- * and the DMA will work until the status byte interrupt occurs.
- */
-#define	SLM_CONT_CNT_REPROG
-
-#define CMDSET_TARG_LUN(cmd,targ,lun)			\
-    do {										\
-		cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5;	\
-		cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5;	\
-	} while(0)
-
-#define	START_TIMER(to)	mod_timer(&slm_timer, jiffies + (to))
-#define	STOP_TIMER()	del_timer(&slm_timer)
-
-
-static char slmreqsense_cmd[6] = { 0x03, 0, 0, 0, 0, 0 };
-static char slmprint_cmd[6]    = { 0x0a, 0, 0, 0, 0, 0 };
-static char slminquiry_cmd[6]  = { 0x12, 0, 0, 0, 0, 0x80 };
-static char slmmsense_cmd[6]   = { 0x1a, 0, 0, 0, 255, 0 };
-#if 0
-static char slmmselect_cmd[6]  = { 0x15, 0, 0, 0, 0, 0 };
-#endif
-
-
-#define	MAX_SLM		2
-
-static struct slm {
-	unsigned	target;			/* target number */
-	unsigned	lun;			/* LUN in target controller */
-	atomic_t	wr_ok; 			/* set to 0 if output part busy */
-	atomic_t	rd_ok;			/* set to 0 if status part busy */
-} slm_info[MAX_SLM];
-
-int N_SLM_Printers = 0;
-
-/* printer buffer */
-static unsigned char	*SLMBuffer;	/* start of buffer */
-static unsigned char	*BufferP;	/* current position in buffer */
-static int				BufferSize;	/* length of buffer for page size */
-
-typedef enum { IDLE, FILLING, PRINTING } SLMSTATE;
-static SLMSTATE			SLMState;
-static int				SLMBufOwner;	/* SLM# currently using the buffer */
-
-/* DMA variables */
-#ifndef SLM_CONT_CNT_REPROG
-static unsigned long	SLMCurAddr;		/* current base addr of DMA chunk */
-static unsigned long	SLMEndAddr;		/* expected end addr */
-static unsigned long	SLMSliceSize;	/* size of one DMA chunk */
-#endif
-static int				SLMError;
-
-/* wait queues */
-static DECLARE_WAIT_QUEUE_HEAD(slm_wait);	/* waiting for buffer */
-static DECLARE_WAIT_QUEUE_HEAD(print_wait);	/* waiting for printing finished */
-
-/* status codes */
-#define	SLMSTAT_OK		0x00
-#define	SLMSTAT_ORNERY	0x02
-#define	SLMSTAT_TONER	0x03
-#define	SLMSTAT_WARMUP	0x04
-#define	SLMSTAT_PAPER	0x05
-#define	SLMSTAT_DRUM	0x06
-#define	SLMSTAT_INJAM	0x07
-#define	SLMSTAT_THRJAM	0x08
-#define	SLMSTAT_OUTJAM	0x09
-#define	SLMSTAT_COVER	0x0a
-#define	SLMSTAT_FUSER	0x0b
-#define	SLMSTAT_IMAGER	0x0c
-#define	SLMSTAT_MOTOR	0x0d
-#define	SLMSTAT_VIDEO	0x0e
-#define	SLMSTAT_SYSTO	0x10
-#define	SLMSTAT_OPCODE	0x12
-#define	SLMSTAT_DEVNUM	0x15
-#define	SLMSTAT_PARAM	0x1a
-#define	SLMSTAT_ACSITO	0x1b	/* driver defined */
-#define	SLMSTAT_NOTALL	0x1c	/* driver defined */
-
-static char *SLMErrors[] = {
-	/* 0x00 */	"OK and ready",
-	/* 0x01 */	NULL,
-	/* 0x02 */	"ornery printer",
-	/* 0x03 */	"toner empty",
-	/* 0x04 */	"warming up",
-	/* 0x05 */	"paper empty",
-	/* 0x06 */	"drum empty",
-	/* 0x07 */	"input jam",
-	/* 0x08 */	"through jam",
-	/* 0x09 */	"output jam",
-	/* 0x0a */	"cover open",
-	/* 0x0b */	"fuser malfunction",
-	/* 0x0c */	"imager malfunction",
-	/* 0x0d */	"motor malfunction",
-	/* 0x0e */	"video malfunction",
-	/* 0x0f */	NULL,
-	/* 0x10 */	"printer system timeout",
-	/* 0x11 */	NULL,
-	/* 0x12 */	"invalid operation code",
-	/* 0x13 */	NULL,
-	/* 0x14 */	NULL,
-	/* 0x15 */	"invalid device number",
-	/* 0x16 */	NULL,
-	/* 0x17 */	NULL,
-	/* 0x18 */	NULL,
-	/* 0x19 */	NULL,
-	/* 0x1a */	"invalid parameter list",
-	/* 0x1b */	"ACSI timeout",
-	/* 0x1c */	"not all printed"
-};
-
-#define	N_ERRORS	(sizeof(SLMErrors)/sizeof(*SLMErrors))
-
-/* real (driver caused) error? */
-#define	IS_REAL_ERROR(x)	(x > 0x10)
-
-
-static struct {
-	char	*name;
-	int 	w, h;
-} StdPageSize[] = {
-	{ "Letter", 2400, 3180 },
-	{ "Legal",  2400, 4080 },
-	{ "A4",     2336, 3386 },
-	{ "B5",     2016, 2914 }
-};
-
-#define	N_STD_SIZES		(sizeof(StdPageSize)/sizeof(*StdPageSize))
-
-#define	SLM_BUFFER_SIZE	(2336*3386/8)	/* A4 for now */
-#define	SLM_DMA_AMOUNT	255				/* #sectors to program the DMA for */
-
-#ifdef	SLM_CONTINUOUS_DMA
-# define	SLM_DMA_INT_OFFSET	0		/* DMA goes until seccnt 0, no offs */
-# define	SLM_DMA_END_OFFSET	32		/* 32 Byte ST-DMA FIFO */
-# define	SLM_SLICE_SIZE(w) 	(255*512)
-#else
-# define	SLM_DMA_INT_OFFSET	32		/* 32 Byte ST-DMA FIFO */
-# define	SLM_DMA_END_OFFSET	32		/* 32 Byte ST-DMA FIFO */
-# define	SLM_SLICE_SIZE(w)	((254*512)/(w/8)*(w/8))
-#endif
-
-/* calculate the number of jiffies to wait for 'n' bytes */
-#ifdef SLM_CONT_CNT_REPROG
-#define	DMA_TIME_FOR(n)		50
-#define	DMA_STARTUP_TIME	0
-#else
-#define	DMA_TIME_FOR(n)		(n/1400-1)
-#define	DMA_STARTUP_TIME	650
-#endif
-
-/***************************** Prototypes *****************************/
-
-static char *slm_errstr( int stat );
-static int slm_getstats( char *buffer, int device );
-static ssize_t slm_read( struct file* file, char *buf, size_t count, loff_t
-                         *ppos );
-static void start_print( int device );
-static irqreturn_t slm_interrupt(int irc, void *data);
-static void slm_test_ready( unsigned long dummy );
-static void set_dma_addr( unsigned long paddr );
-static unsigned long get_dma_addr( void );
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
-                          loff_t *ppos );
-static int slm_ioctl( struct inode *inode, struct file *file, unsigned int
-                      cmd, unsigned long arg );
-static int slm_open( struct inode *inode, struct file *file );
-static int slm_release( struct inode *inode, struct file *file );
-static int slm_req_sense( int device );
-static int slm_mode_sense( int device, char *buffer, int abs_flag );
-#if 0
-static int slm_mode_select( int device, char *buffer, int len, int
-                            default_flag );
-#endif
-static int slm_get_pagesize( int device, int *w, int *h );
-
-/************************* End of Prototypes **************************/
-
-
-static DEFINE_TIMER(slm_timer, slm_test_ready, 0, 0);
-
-static const struct file_operations slm_fops = {
-	.owner =	THIS_MODULE,
-	.read =		slm_read,
-	.write =	slm_write,
-	.ioctl =	slm_ioctl,
-	.open =		slm_open,
-	.release =	slm_release,
-};
-
-
-/* ---------------------------------------------------------------------- */
-/*							   Status Functions							  */
-
-
-static char *slm_errstr( int stat )
-
-{	char *p;
-	static char	str[22];
-
-	stat &= 0x1f;
-	if (stat >= 0 && stat < N_ERRORS && (p = SLMErrors[stat]))
-		return( p );
-	sprintf( str, "unknown status 0x%02x", stat );
-	return( str );
-}
-
-
-static int slm_getstats( char *buffer, int device )
-
-{	int 			len = 0, stat, i, w, h;
-	unsigned char	buf[256];
-	
-	stat = slm_mode_sense( device, buf, 0 );
-	if (IS_REAL_ERROR(stat))
-		return( -EIO );
-	
-#define SHORTDATA(i)		((buf[i] << 8) | buf[i+1])
-#define	BOOLDATA(i,mask)	((buf[i] & mask) ? "on" : "off")
-
-	w = SHORTDATA( 3 );
-	h = SHORTDATA( 1 );
-		
-	len += sprintf( buffer+len, "Status\t\t%s\n",
-					slm_errstr( stat ) );
-	len += sprintf( buffer+len, "Page Size\t%dx%d",
-					w, h );
-
-	for( i = 0; i < N_STD_SIZES; ++i ) {
-		if (w == StdPageSize[i].w && h == StdPageSize[i].h)
-			break;
-	}
-	if (i < N_STD_SIZES)
-		len += sprintf( buffer+len, " (%s)", StdPageSize[i].name );
-	buffer[len++] = '\n';
-
-	len += sprintf( buffer+len, "Top/Left Margin\t%d/%d\n",
-					SHORTDATA( 5 ), SHORTDATA( 7 ) );
-	len += sprintf( buffer+len, "Manual Feed\t%s\n",
-					BOOLDATA( 9, 0x01 ) );
-	len += sprintf( buffer+len, "Input Select\t%d\n",
-					(buf[9] >> 1) & 7 );
-	len += sprintf( buffer+len, "Auto Select\t%s\n",
-					BOOLDATA( 9, 0x10 ) );
-	len += sprintf( buffer+len, "Prefeed Paper\t%s\n",
-					BOOLDATA( 9, 0x20 ) );
-	len += sprintf( buffer+len, "Thick Pixels\t%s\n",
-					BOOLDATA( 9, 0x40 ) );
-	len += sprintf( buffer+len, "H/V Resol.\t%d/%d dpi\n",
-					SHORTDATA( 12 ), SHORTDATA( 10 ) );
-	len += sprintf( buffer+len, "System Timeout\t%d\n",
-					buf[14] );
-	len += sprintf( buffer+len, "Scan Time\t%d\n",
-					SHORTDATA( 15 ) );
-	len += sprintf( buffer+len, "Page Count\t%d\n",
-					SHORTDATA( 17 ) );
-	len += sprintf( buffer+len, "In/Out Cap.\t%d/%d\n",
-					SHORTDATA( 19 ), SHORTDATA( 21 ) );
-	len += sprintf( buffer+len, "Stagger Output\t%s\n",
-					BOOLDATA( 23, 0x01 ) );
-	len += sprintf( buffer+len, "Output Select\t%d\n",
-					(buf[23] >> 1) & 7 );
-	len += sprintf( buffer+len, "Duplex Print\t%s\n",
-					BOOLDATA( 23, 0x10 ) );
-	len += sprintf( buffer+len, "Color Sep.\t%s\n",
-					BOOLDATA( 23, 0x20 ) );
-
-	return( len );
-}
-
-
-static ssize_t slm_read( struct file *file, char *buf, size_t count,
-						 loff_t *ppos )
-
-{
-	struct inode *node = file->f_path.dentry->d_inode;
-	unsigned long page;
-	int length;
-	int end;
-
-	if (!(page = __get_free_page( GFP_KERNEL )))
-		return( -ENOMEM );
-	
-	length = slm_getstats( (char *)page, iminor(node) );
-	if (length < 0) {
-		count = length;
-		goto out;
-	}
-	if (file->f_pos >= length) {
-		count = 0;
-		goto out;
-	}
-	if (count + file->f_pos > length)
-		count = length - file->f_pos;
-	end = count + file->f_pos;
-	if (copy_to_user(buf, (char *)page + file->f_pos, count)) {
-		count = -EFAULT;
-		goto out;
-	}
-	file->f_pos = end;
-out:	free_page( page );
-	return( count );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*								   Printing								  */
-
-
-static void start_print( int device )
-
-{	struct slm *sip = &slm_info[device];
-	unsigned char	*cmd;
-	unsigned long	paddr;
-	int				i;
-	
-	stdma_lock( slm_interrupt, NULL );
-
-	CMDSET_TARG_LUN( slmprint_cmd, sip->target, sip->lun );
-	cmd = slmprint_cmd;
-	paddr = virt_to_phys( SLMBuffer );
-	dma_cache_maintenance( paddr, virt_to_phys(BufferP)-paddr, 1 );
-	DISABLE_IRQ();
-
-	/* Low on A1 */
-	dma_wd.dma_mode_status = 0x88;
-	MFPDELAY();
-
-	/* send the command bytes except the last */
-	for( i = 0; i < 5; ++i ) {
-		DMA_LONG_WRITE( *cmd++, 0x8a );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) {
-			SLMError = 1;
-			return; /* timeout */
-		}
-	}
-	/* last command byte */
-	DMA_LONG_WRITE( *cmd++, 0x82 );
-	MFPDELAY();
-	/* set DMA address */
-	set_dma_addr( paddr );
-	/* program DMA for write and select sector counter reg */
-	dma_wd.dma_mode_status = 0x192;
-	MFPDELAY();
-	/* program for 255*512 bytes and start DMA */
-	DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-
-#ifndef SLM_CONT_CNT_REPROG
-	SLMCurAddr = paddr;
-	SLMEndAddr = paddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
-#endif
-	START_TIMER( DMA_STARTUP_TIME + DMA_TIME_FOR( SLMSliceSize ));
-#if !defined(SLM_CONT_CNT_REPROG) && defined(DEBUG)
-	printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
-			SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
-	
-	ENABLE_IRQ();
-}
-
-
-/* Only called when an error happened or at the end of a page */
-
-static irqreturn_t slm_interrupt(int irc, void *data)
-
-{	unsigned long	addr;
-	int				stat;
-	
-	STOP_TIMER();
-	addr = get_dma_addr();
-	stat = acsi_getstatus();
-	SLMError = (stat < 0)             ? SLMSTAT_ACSITO :
-		       (addr < virt_to_phys(BufferP)) ? SLMSTAT_NOTALL :
-									    stat;
-
-	dma_wd.dma_mode_status = 0x80;
-	MFPDELAY();
-#ifdef DEBUG
-	printk( "SLM: interrupt, addr=%#lx, error=%d\n", addr, SLMError );
-#endif
-
-	wake_up( &print_wait );
-	stdma_release();
-	ENABLE_IRQ();
-	return IRQ_HANDLED;
-}
-
-
-static void slm_test_ready( unsigned long dummy )
-
-{
-#ifdef SLM_CONT_CNT_REPROG
-	/* program for 255*512 bytes again */
-	dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
-	START_TIMER( DMA_TIME_FOR(0) );
-#ifdef DEBUG
-	printk( "SLM: reprogramming timer for %d jiffies, addr=%#lx\n",
-			DMA_TIME_FOR(0), get_dma_addr() );
-#endif
-	
-#else /* !SLM_CONT_CNT_REPROG */
-
-	unsigned long	flags, addr;
-	int				d, ti;
-#ifdef DEBUG
-	struct timeval start_tm, end_tm;
-	int			   did_wait = 0;
-#endif
-
-	local_irq_save(flags);
-
-	addr = get_dma_addr();
-	if ((d = SLMEndAddr - addr) > 0) {
-		local_irq_restore(flags);
-		
-		/* slice not yet finished, decide whether to start another timer or to
-		 * busy-wait */
-		ti = DMA_TIME_FOR( d );
-		if (ti > 0) {
-#ifdef DEBUG
-			printk( "SLM: reprogramming timer for %d jiffies, rest %d bytes\n",
-					ti, d );
-#endif
-			START_TIMER( ti );
-			return;
-		}
-		/* wait for desired end address to be reached */
-#ifdef DEBUG
-		do_gettimeofday( &start_tm );
-		did_wait = 1;
-#endif
-		local_irq_disable();
-		while( get_dma_addr() < SLMEndAddr )
-			barrier();
-	}
-
-	/* slice finished, start next one */
-	SLMCurAddr += SLMSliceSize;
-
-#ifdef SLM_CONTINUOUS_DMA
-	/* program for 255*512 bytes again */
-	dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
-#else
-	/* set DMA address;
-	 * add 2 bytes for the ones in the SLM controller FIFO! */
-	set_dma_addr( SLMCurAddr + 2 );
-	/* toggle DMA to write and select sector counter reg */
-	dma_wd.dma_mode_status = 0x92;
-	MFPDELAY();
-	dma_wd.dma_mode_status = 0x192;
-	MFPDELAY();
-	/* program for 255*512 bytes and start DMA */
-	DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-#endif
-	
-	local_irq_restore(flags);
-
-#ifdef DEBUG
-	if (did_wait) {
-		int ms;
-		do_gettimeofday( &end_tm );
-		ms = (end_tm.tv_sec*1000000+end_tm.tv_usec) -
-			 (start_tm.tv_sec*1000000+start_tm.tv_usec); 
-		printk( "SLM: did %ld.%ld ms busy waiting for %d bytes\n",
-				ms/1000, ms%1000, d );
-	}
-	else
-		printk( "SLM: didn't wait (!)\n" );
-#endif
-
-	if ((unsigned char *)PTOV( SLMCurAddr + SLMSliceSize ) >= BufferP) {
-		/* will be last slice, no timer necessary */
-#ifdef DEBUG
-		printk( "SLM: CurAddr=%#lx EndAddr=%#lx last slice -> no timer\n",
-				SLMCurAddr, SLMEndAddr );
-#endif
-	}
-	else {
-		/* not last slice */
-		SLMEndAddr = SLMCurAddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
-		START_TIMER( DMA_TIME_FOR( SLMSliceSize ));
-#ifdef DEBUG
-		printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
-				SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
-	}
-#endif /* SLM_CONT_CNT_REPROG */
-}
-
-
-static void set_dma_addr( unsigned long paddr )
-
-{	unsigned long flags;
-
-	local_irq_save(flags);
-	dma_wd.dma_lo = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	dma_wd.dma_md = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	if (ATARIHW_PRESENT( EXTD_DMA ))
-		st_dma_ext_dmahi = (unsigned short)paddr;
-	else
-		dma_wd.dma_hi = (unsigned char)paddr;
-	MFPDELAY();
-	local_irq_restore(flags);
-}
-
-
-static unsigned long get_dma_addr( void )
-
-{	unsigned long	addr;
-	
-	addr = dma_wd.dma_lo & 0xff;
-	MFPDELAY();
-	addr |= (dma_wd.dma_md & 0xff) << 8;
-	MFPDELAY();
-	addr |= (dma_wd.dma_hi & 0xff) << 16;
-	MFPDELAY();
-
-	return( addr );
-}
-
-
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
-						  loff_t *ppos )
-
-{
-	struct inode *node = file->f_path.dentry->d_inode;
-	int		device = iminor(node);
-	int		n, filled, w, h;
-
-	while( SLMState == PRINTING ||
-		   (SLMState == FILLING && SLMBufOwner != device) ) {
-		interruptible_sleep_on( &slm_wait );
-		if (signal_pending(current))
-			return( -ERESTARTSYS );
-	}
-	if (SLMState == IDLE) {
-		/* first data of page: get current page size  */
-		if (slm_get_pagesize( device, &w, &h ))
-			return( -EIO );
-		BufferSize = w*h/8;
-		if (BufferSize > SLM_BUFFER_SIZE)
-			return( -ENOMEM );
-
-		SLMState = FILLING;
-		SLMBufOwner = device;
-	}
-
-	n = count;
-	filled = BufferP - SLMBuffer;
-	if (filled + n > BufferSize)
-		n = BufferSize - filled;
-
-	if (copy_from_user(BufferP, buf, n))
-		return -EFAULT;
-	BufferP += n;
-	filled += n;
-
-	if (filled == BufferSize) {
-		/* Check the paper size again! The user may have switched it in the
-		 * time between starting the data and finishing them. Would end up in
-		 * a trashy page... */
-		if (slm_get_pagesize( device, &w, &h ))
-			return( -EIO );
-		if (BufferSize != w*h/8) {
-			printk( KERN_NOTICE "slm%d: page size changed while printing\n",
-					device );
-			return( -EAGAIN );
-		}
-
-		SLMState = PRINTING;
-		/* choose a slice size that is a multiple of the line size */
-#ifndef SLM_CONT_CNT_REPROG
-		SLMSliceSize = SLM_SLICE_SIZE(w);
-#endif
-		
-		start_print( device );
-		sleep_on( &print_wait );
-		if (SLMError && IS_REAL_ERROR(SLMError)) {
-			printk( KERN_ERR "slm%d: %s\n", device, slm_errstr(SLMError) );
-			n = -EIO;
-		}
-
-		SLMState = IDLE;
-		BufferP = SLMBuffer;
-		wake_up_interruptible( &slm_wait );
-	}
-	
-	return( n );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*							   ioctl Functions							  */
-
-
-static int slm_ioctl( struct inode *inode, struct file *file,
-					  unsigned int cmd, unsigned long arg )
-
-{	int		device = iminor(inode), err;
-	
-	/* I can think of setting:
-	 *  - manual feed
-	 *  - paper format
-	 *  - copy count
-	 *  - ...
-	 * but haven't implemented that yet :-)
-	 * BTW, has anybody better docs about the MODE SENSE/MODE SELECT data?
-	 */
-	switch( cmd ) {
-
-	  case SLMIORESET:		/* reset buffer, i.e. empty the buffer */
-		if (!(file->f_mode & 2))
-			return( -EINVAL );
-		if (SLMState == PRINTING)
-			return( -EBUSY );
-		SLMState = IDLE;
-		BufferP = SLMBuffer;
-		wake_up_interruptible( &slm_wait );
-		return( 0 );
-		
-	  case SLMIOGSTAT: {	/* get status */
-		int stat;
-		char *str;
-
-		stat = slm_req_sense( device );
-		if (arg) {
-			str = slm_errstr( stat );
-			if (put_user(stat,
-    	    	    	    	     (long *)&((struct SLM_status *)arg)->stat))
-    	    	    	    	return -EFAULT;
-			if (copy_to_user( ((struct SLM_status *)arg)->str, str,
-						 strlen(str) + 1))
-				return -EFAULT;
-		}
-		return( stat );
-	  }
-		
-	  case SLMIOGPSIZE: {	/* get paper size */
-		int w, h;
-		
-		if ((err = slm_get_pagesize( device, &w, &h ))) return( err );
-		
-    	    	if (put_user(w, (long *)&((struct SLM_paper_size *)arg)->width))
-			return -EFAULT;
-		if (put_user(h, (long *)&((struct SLM_paper_size *)arg)->height))
-			return -EFAULT;
-		return( 0 );
-	  }
-		
-	  case SLMIOGMFEED:	/* get manual feed */
-		return( -EINVAL );
-
-	  case SLMIOSPSIZE:	/* set paper size */
-		return( -EINVAL );
-
-	  case SLMIOSMFEED:	/* set manual feed */
-		return( -EINVAL );
-
-	}
-	return( -EINVAL );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*							 Opening and Closing						  */
-
-
-static int slm_open( struct inode *inode, struct file *file )
-
-{	int device;
-	struct slm *sip;
-	
-	device = iminor(inode);
-	if (device >= N_SLM_Printers)
-		return( -ENXIO );
-	sip = &slm_info[device];
-
-	if (file->f_mode & 2) {
-		/* open for writing is exclusive */
-		if ( !atomic_dec_and_test(&sip->wr_ok) ) {
-			atomic_inc(&sip->wr_ok);	
-			return( -EBUSY );
-		}
-	}
-	if (file->f_mode & 1) {
-		/* open for reading is exclusive */
-                if ( !atomic_dec_and_test(&sip->rd_ok) ) {
-                        atomic_inc(&sip->rd_ok);
-                        return( -EBUSY );
-                }
-	}
-
-	return( 0 );
-}
-
-
-static int slm_release( struct inode *inode, struct file *file )
-
-{	int device;
-	struct slm *sip;
-	
-	device = iminor(inode);
-	sip = &slm_info[device];
-
-	if (file->f_mode & 2)
-		atomic_inc( &sip->wr_ok );
-	if (file->f_mode & 1)
-		atomic_inc( &sip->rd_ok );
-	
-	return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*						 ACSI Primitives for the SLM					  */
-
-
-static int slm_req_sense( int device )
-
-{	int			stat, rv;
-	struct slm *sip = &slm_info[device];
-	
-	stdma_lock( NULL, NULL );
-
-	CMDSET_TARG_LUN( slmreqsense_cmd, sip->target, sip->lun );
-	if (!acsicmd_nodma( slmreqsense_cmd, 0 ) ||
-		(stat = acsi_getstatus()) < 0)
-		rv = SLMSTAT_ACSITO;
-	else
-		rv = stat & 0x1f;
-
-	ENABLE_IRQ();
-	stdma_release();
-	return( rv );
-}
-
-
-static int slm_mode_sense( int device, char *buffer, int abs_flag )
-
-{	unsigned char	stat, len;
-	int				rv = 0;
-	struct slm		*sip = &slm_info[device];
-	
-	stdma_lock( NULL, NULL );
-
-	CMDSET_TARG_LUN( slmmsense_cmd, sip->target, sip->lun );
-	slmmsense_cmd[5] = abs_flag ? 0x80 : 0;
-	if (!acsicmd_nodma( slmmsense_cmd, 0 )) {
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-
-	if (!acsi_extstatus( &stat, 1 )) {
-		acsi_end_extstatus();
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-	
-	if (!acsi_extstatus( &len, 1 )) {
-		acsi_end_extstatus();
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-	buffer[0] = len;
-	if (!acsi_extstatus( buffer+1, len )) {
-		acsi_end_extstatus();
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-	
-	acsi_end_extstatus();
-	rv = stat & 0x1f;
-
-  the_end:
-	ENABLE_IRQ();
-	stdma_release();
-	return( rv );
-}
-
-
-#if 0
-/* currently unused */
-static int slm_mode_select( int device, char *buffer, int len,
-							int default_flag )
-
-{	int			stat, rv;
-	struct slm	*sip = &slm_info[device];
-	
-	stdma_lock( NULL, NULL );
-
-	CMDSET_TARG_LUN( slmmselect_cmd, sip->target, sip->lun );
-	slmmselect_cmd[5] = default_flag ? 0x80 : 0;
-	if (!acsicmd_nodma( slmmselect_cmd, 0 )) {
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-
-	if (!default_flag) {
-		unsigned char c = len;
-		if (!acsi_extcmd( &c, 1 )) {
-			rv = SLMSTAT_ACSITO;
-			goto the_end;
-		}
-		if (!acsi_extcmd( buffer, len )) {
-			rv = SLMSTAT_ACSITO;
-			goto the_end;
-		}
-	}
-	
-	stat = acsi_getstatus();
-	rv = (stat < 0 ? SLMSTAT_ACSITO : stat);
-
-  the_end:
-	ENABLE_IRQ();
-	stdma_release();
-	return( rv );
-}
-#endif
-
-
-static int slm_get_pagesize( int device, int *w, int *h )
-
-{	char	buf[256];
-	int		stat;
-	
-	stat = slm_mode_sense( device, buf, 0 );
-	ENABLE_IRQ();
-	stdma_release();
-
-	if (stat != SLMSTAT_OK)
-		return( -EIO );
-
-	*w = (buf[3] << 8) | buf[4];
-	*h = (buf[1] << 8) | buf[2];
-	return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*								Initialization							  */
-
-
-int attach_slm( int target, int lun )
-
-{	static int	did_register;
-	int			len;
-
-	if (N_SLM_Printers >= MAX_SLM) {
-		printk( KERN_WARNING "Too much SLMs\n" );
-		return( 0 );
-	}
-	
-	/* do an INQUIRY */
-	udelay(100);
-	CMDSET_TARG_LUN( slminquiry_cmd, target, lun );
-	if (!acsicmd_nodma( slminquiry_cmd, 0 )) {
-	  inq_timeout:
-		printk( KERN_ERR "SLM inquiry command timed out.\n" );
-	  inq_fail:
-		acsi_end_extstatus();
-		return( 0 );
-	}
-	/* read status and header of return data */
-	if (!acsi_extstatus( SLMBuffer, 6 ))
-		goto inq_timeout;
-
-	if (SLMBuffer[1] != 2) { /* device type == printer? */
-		printk( KERN_ERR "SLM inquiry returned device type != printer\n" );
-		goto inq_fail;
-	}
-	len = SLMBuffer[5];
-	
-	/* read id string */
-	if (!acsi_extstatus( SLMBuffer, len ))
-		goto inq_timeout;
-	acsi_end_extstatus();
-	SLMBuffer[len] = 0;
-
-	if (!did_register) {
-		did_register = 1;
-	}
-
-	slm_info[N_SLM_Printers].target = target;
-	slm_info[N_SLM_Printers].lun    = lun;
-	atomic_set(&slm_info[N_SLM_Printers].wr_ok, 1 ); 
-	atomic_set(&slm_info[N_SLM_Printers].rd_ok, 1 );
-	
-	printk( KERN_INFO "  Printer: %s\n", SLMBuffer );
-	printk( KERN_INFO "Detected slm%d at id %d lun %d\n",
-			N_SLM_Printers, target, lun );
-	N_SLM_Printers++;
-	return( 1 );
-}
-
-int slm_init( void )
-
-{
-	int i;
-	if (register_chrdev( ACSI_MAJOR, "slm", &slm_fops )) {
-		printk( KERN_ERR "Unable to get major %d for ACSI SLM\n", ACSI_MAJOR );
-		return -EBUSY;
-	}
-	
-	if (!(SLMBuffer = atari_stram_alloc( SLM_BUFFER_SIZE, "SLM" ))) {
-		printk( KERN_ERR "Unable to get SLM ST-Ram buffer.\n" );
-		unregister_chrdev( ACSI_MAJOR, "slm" );
-		return -ENOMEM;
-	}
-	BufferP = SLMBuffer;
-	SLMState = IDLE;
-	
-	return 0;
-}
-
-#ifdef MODULE
-
-/* from acsi.c */
-void acsi_attach_SLMs( int (*attach_func)( int, int ) );
-
-int init_module(void)
-{
-	int err;
-
-	if ((err = slm_init()))
-		return( err );
-	/* This calls attach_slm() for every target/lun where acsi.c detected a
-	 * printer */
-	acsi_attach_SLMs( attach_slm );
-	return( 0 );
-}
-
-void cleanup_module(void)
-{
-	if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0)
-		printk( KERN_ERR "acsi_slm: cleanup_module failed\n");
-	atari_stram_free( SLMBuffer );
-}
-#endif
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d17d64eb706..71e7ef2cc99 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -405,22 +405,6 @@ config ATARILANCE
 	  on the AMD Lance chipset: RieblCard (with or without battery), or
 	  PAMCard VME (also the version by Rhotron, with different addresses).
 
-config ATARI_BIONET
-	tristate "BioNet-100 support"
-	depends on ATARI && ATARI_ACSI && BROKEN
-	help
-	  Say Y to include support for BioData's BioNet-100 Ethernet adapter
-	  for the ACSI port. The driver works (has to work...) with a polled
-	  I/O scheme, so it's rather slow :-(
-
-config ATARI_PAMSNET
-	tristate "PAMsNet support"
-	depends on ATARI && ATARI_ACSI && BROKEN
-	help
-	  Say Y to include support for the PAMsNet Ethernet adapter for the
-	  ACSI port ("ACSI node"). The driver works (has to work...) with a
-	  polled I/O scheme, so it's rather slow :-(
-
 config SUN3LANCE
 	tristate "Sun3/Sun3x on-board LANCE support"
 	depends on SUN3 || SUN3X
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c26b8674213..a21b98ea16a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -180,8 +180,6 @@ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
 obj-$(CONFIG_DECLANCE) += declance.o
 obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
-obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
 obj-$(CONFIG_A2065) += a2065.o
 obj-$(CONFIG_HYDRA) += hydra.o
 obj-$(CONFIG_ARIADNE) += ariadne.o
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 1c3e293fbaf..3b79c6cf21a 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -75,8 +75,6 @@ extern struct net_device *atarilance_probe(int unit);
 extern struct net_device *sun3lance_probe(int unit);
 extern struct net_device *sun3_82586_probe(int unit);
 extern struct net_device *apne_probe(int unit);
-extern struct net_device *bionet_probe(int unit);
-extern struct net_device *pamsnet_probe(int unit);
 extern struct net_device *cs89x0_probe(int unit);
 extern struct net_device *hplance_probe(int unit);
 extern struct net_device *bagetlance_probe(int unit);
@@ -264,12 +262,6 @@ static struct devprobe2 m68k_probes[] __initdata = {
 #ifdef CONFIG_APNE		/* A1200 PCMCIA NE2000 */
 	{apne_probe, 0},
 #endif
-#ifdef CONFIG_ATARI_BIONET	/* Atari Bionet Ethernet board */
-	{bionet_probe, 0},
-#endif
-#ifdef CONFIG_ATARI_PAMSNET	/* Atari PAMsNet Ethernet board */
-	{pamsnet_probe, 0},
-#endif
 #ifdef CONFIG_MVME147_NET	/* MVME147 internal Ethernet */
 	{mvme147lance_probe, 0},
 #endif
diff --git a/drivers/net/atari_bionet.c b/drivers/net/atari_bionet.c
deleted file mode 100644
index 3d87bd2b419..00000000000
--- a/drivers/net/atari_bionet.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/* bionet.c     BioNet-100 device driver for linux68k.
- *
- * Version:	@(#)bionet.c	1.0	02/06/96
- *
- * Author:	Hartmut Laue <laue@ifk-mp.uni-kiel.de>
- * and		Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
- *
- * Little adaptions for integration into pl7 by Roman Hodek
- *
- * Some changes in bionet_poll_rx by Karl-Heinz Lohner
- *
-	What is it ?
-	------------
-	This driver controls the BIONET-100 LAN-Adapter which connects
-	an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
-
-	This version can be compiled as a loadable module (See the
-	compile command at the bottom of this file).
-	At load time, you can optionally set the debugging level and the
-	fastest response time on the command line of 'insmod'.
-
-	'bionet_debug'
-		controls the amount of diagnostic messages:
-	  0  : no messages
-	  >0 : see code for meaning of printed messages
-
-	'bionet_min_poll_time' (always >=1)
-		gives the time (in jiffies) between polls. Low values
-		increase the system load (beware!)
-
-	When loaded, a net device with the name 'bio0' becomes available,
-	which can be controlled with the usual 'ifconfig' command.
-
-	It is possible to compile this driver into the kernel like other
-	(net) drivers. For this purpose, some source files (e.g. config-files
-	makefiles, Space.c) must be changed accordingly. (You may refer to
-	other drivers how to do it.) In this case, the device will be detected
-	at boot time and (probably) appear as 'eth0'.
-
-	This code is based on several sources:
-	- The driver code for a parallel port ethernet adapter by
-	  Donald Becker (see file 'atp.c' from the PC linux distribution)
-	- The ACSI code by Roman Hodek for the ATARI-ACSI harddisk support
-	  and DMA handling.
-	- Very limited information about moving packets in and out of the
-	  BIONET-adapter from the TCP package for TOS by BioData GmbH.
-
-	Theory of Operation
-	-------------------
-	Because the ATARI DMA port is usually shared between several
-	devices (eg. harddisk, floppy) we cannot block the ACSI bus
-	while waiting for interrupts. Therefore we use a polling mechanism
-	to fetch packets from the adapter. For the same reason, we send
-	packets without checking that the previous packet has been sent to
-	the LAN. We rely on the higher levels of the networking code to detect
-	missing packets and resend them.
-
-	Before we access the ATARI DMA controller, we check if another
-	process is using the DMA. If not, we lock the DMA, perform one or
-	more packet transfers and unlock the DMA before returning.
-	We do not use 'stdma_lock' unconditionally because it is unclear
-	if the networking code can be set to sleep, which will happen if
-	another (possibly slow) device is using the DMA controller.
-
-	The polling is done via timer interrupts which periodically
-	'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
-	between polls varies depending on an estimate of the net activity.
-	The allowed range is given by the variable 'bionet_min_poll_time'
-	for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
-	for the higher (slowest) limit.
-
-	Whenever a packet arrives, we switch to fastest response by setting
-	the polling time to its lowest limit. If the following poll fails,
-	because no packets have arrived, we increase the time for the next
-	poll. When the net activity is low, the polling time effectively
-	stays at its maximum value, resulting in the lowest load for the
-	machine.
- */
-
-#define MAX_POLL_TIME	10
-
-static char version[] =
-	"bionet.c:v1.0 06-feb-96 (c) Hartmut Laue.\n";
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-
-
-/* use 0 for production, 1 for verification, >2 for debug
- */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-/*
- * Global variable 'bionet_debug'. Can be set at load time by 'insmod'
- */
-unsigned int bionet_debug = NET_DEBUG;
-module_param(bionet_debug, int, 0);
-MODULE_PARM_DESC(bionet_debug, "bionet debug level (0-2)");
-MODULE_LICENSE("GPL");
-
-static unsigned int bionet_min_poll_time = 2;
-
-
-/* Information that need to be kept for each board.
- */
-struct net_local {
-	struct net_device_stats stats;
-	long open_time;			/* for debugging */
-	int  poll_time;			/* polling time varies with net load */
-};
-
-static struct nic_pkt_s {		/* packet format */
-	unsigned char	status;
-	unsigned char	dummy;
-	unsigned char	l_lo, l_hi;
-	unsigned char	buffer[3000];
-} *nic_packet;
-unsigned char *phys_nic_packet;
-
-/* Index to functions, as function prototypes.
- */
-static int bionet_open(struct net_device *dev);
-static int bionet_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void bionet_poll_rx(struct net_device *);
-static int bionet_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void bionet_tick(unsigned long);
-
-static DEFINE_TIMER(bionet_timer, bionet_tick, 0, 0);
-
-#define STRAM_ADDR(a)	(((a) & 0xff000000) == 0)
-
-/* The following routines access the ethernet board connected to the
- * ACSI port via the st_dma chip.
- */
-#define NODE_ADR 0x60
-
-#define C_READ 8
-#define C_WRITE 0x0a
-#define C_GETEA 0x0f
-#define C_SETCR 0x0e
-
-static int
-sendcmd(unsigned int a0, unsigned int mod, unsigned int cmd) {
-	unsigned int c;
-
-	dma_wd.dma_mode_status = (mod | ((a0) ? 2 : 0) | 0x88);
-	dma_wd.fdc_acces_seccount = cmd;
-	dma_wd.dma_mode_status = (mod | 0x8a);
-
-	if( !acsi_wait_for_IRQ(HZ/2) )	/* wait for cmd ack */
-		return -1;		/* timeout */
-
-	c = dma_wd.fdc_acces_seccount;
-	return (c & 0xff);
-}
-
-
-static void
-set_status(int cr) {
-	sendcmd(0,0x100,NODE_ADR | C_SETCR);    /* CMD: SET CR */
-	sendcmd(1,0x100,cr);
-
-	dma_wd.dma_mode_status = 0x80;
-}
-
-static int
-get_status(unsigned char *adr) {
-	int i,c;
-
-	DISABLE_IRQ();
-	c = sendcmd(0,0x00,NODE_ADR | C_GETEA);  /* CMD: GET ETH ADR*/
-	if( c < 0 ) goto gsend;
-
-	/* now read status bytes */
-
-	for (i=0; i<6; i++) {
-		dma_wd.fdc_acces_seccount = 0;	/* request next byte */
-
-    		if( !acsi_wait_for_IRQ(HZ/2) ) {	/* wait for cmd ack */
-			c = -1;
-			goto gsend;		/* timeout */
-		}
-		c = dma_wd.fdc_acces_seccount;
-		*adr++ = (unsigned char)c;
-	}
-	c = 1;
-gsend:
-  	dma_wd.dma_mode_status = 0x80;
-	return c;
-}
-
-static irqreturn_t
-bionet_intr(int irq, void *data) {
-	return IRQ_HANDLED;
-}
-
-
-static int
-get_frame(unsigned long paddr, int odd) {
-	int c;
-	unsigned long flags;
-
-	DISABLE_IRQ();
-	local_irq_save(flags);
-
-	dma_wd.dma_mode_status		= 0x9a;
-	dma_wd.dma_mode_status		= 0x19a;
-	dma_wd.dma_mode_status		= 0x9a;
-	dma_wd.fdc_acces_seccount	= 0x04;		/* sector count (was 5) */
-	dma_wd.dma_lo			= (unsigned char)paddr;
-	paddr >>= 8;
-	dma_wd.dma_md			= (unsigned char)paddr;
-	paddr >>= 8;
-	dma_wd.dma_hi			= (unsigned char)paddr;
-	local_irq_restore(flags);
-
-	c = sendcmd(0,0x00,NODE_ADR | C_READ);	/* CMD: READ */
-	if( c < 128 ) goto rend;
-
-	/* now read block */
-
-	c = sendcmd(1,0x00,odd);	/* odd flag for address shift */
-	dma_wd.dma_mode_status	= 0x0a;
-
-	if( !acsi_wait_for_IRQ(100) ) {	/* wait for DMA to complete */
-		c = -1;
-		goto rend;
-	}
-	dma_wd.dma_mode_status	= 0x8a;
-	dma_wd.dma_mode_status	= 0x18a;
-	dma_wd.dma_mode_status	= 0x8a;
-	c = dma_wd.fdc_acces_seccount;
-
-	dma_wd.dma_mode_status	= 0x88;
-	c = dma_wd.fdc_acces_seccount;
-	c = 1;
-
-rend:
-	dma_wd.dma_mode_status	= 0x80;
-	udelay(40);
-	acsi_wait_for_noIRQ(20);
-	return c;
-}
-
-
-static int
-hardware_send_packet(unsigned long paddr, int cnt) {
-	unsigned int c;
-	unsigned long flags;
-
-	DISABLE_IRQ();
-	local_irq_save(flags);
-
-	dma_wd.dma_mode_status	= 0x19a;
-	dma_wd.dma_mode_status	= 0x9a;
-	dma_wd.dma_mode_status	= 0x19a;
-	dma_wd.dma_lo		= (unsigned char)paddr;
-	paddr >>= 8;
-	dma_wd.dma_md		= (unsigned char)paddr;
-	paddr >>= 8;
-	dma_wd.dma_hi		= (unsigned char)paddr;
-
-	dma_wd.fdc_acces_seccount	= 0x4;		/* sector count */
-	local_irq_restore(flags);
-
-	c = sendcmd(0,0x100,NODE_ADR | C_WRITE);	/* CMD: WRITE */
-	c = sendcmd(1,0x100,cnt&0xff);
-	c = sendcmd(1,0x100,cnt>>8);
-
-	/* now write block */
-
-	dma_wd.dma_mode_status	= 0x10a;	/* DMA enable */
-	if( !acsi_wait_for_IRQ(100) )		/* wait for DMA to complete */
-		goto end;
-
-	dma_wd.dma_mode_status	= 0x19a;	/* DMA disable ! */
-	c = dma_wd.fdc_acces_seccount;
-
-end:
-	c = sendcmd(1,0x100,0);
-	c = sendcmd(1,0x100,0);
-
-	dma_wd.dma_mode_status	= 0x180;
-	udelay(40);
-	acsi_wait_for_noIRQ(20);
-	return( c & 0x02);
-}
-
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- */
-struct net_device * __init bionet_probe(int unit)
-{
-	struct net_device *dev;
-	unsigned char station_addr[6];
-	static unsigned version_printed;
-	static int no_more_found;	/* avoid "Probing for..." printed 4 times */
-	int i;
-	int err;
-
-	if (!MACH_IS_ATARI || no_more_found)
-		return ERR_PTR(-ENODEV);
-
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-	SET_MODULE_OWNER(dev);
-
-	printk("Probing for BioNet 100 Adapter...\n");
-
-	stdma_lock(bionet_intr, NULL);
-	i = get_status(station_addr);	/* Read the station address PROM.  */
-	ENABLE_IRQ();
-	stdma_release();
-
-	/* Check the first three octets of the S.A. for the manufactor's code.
-	 */
-
-	if( i < 0
-	||  station_addr[0] != 'B'
-	||  station_addr[1] != 'I'
-	||  station_addr[2] != 'O' ) {
-		no_more_found = 1;
-		printk( "No BioNet 100 found.\n" );
-		free_netdev(dev);
-		return ERR_PTR(-ENODEV);
-	}
-
-	if (bionet_debug > 0 && version_printed++ == 0)
-		printk(version);
-
-	printk("%s: %s found, eth-addr: %02x-%02x-%02x:%02x-%02x-%02x.\n",
-		dev->name, "BioNet 100",
-		station_addr[0], station_addr[1], station_addr[2],
-		station_addr[3], station_addr[4], station_addr[5]);
-
-	/* Initialize the device structure. */
-
-	nic_packet = (struct nic_pkt_s *)acsi_buffer;
-	phys_nic_packet = (unsigned char *)phys_acsi_buffer;
-	if (bionet_debug > 0) {
-		printk("nic_packet at 0x%p, phys at 0x%p\n",
-			nic_packet, phys_nic_packet );
-	}
-
-	dev->open		= bionet_open;
-	dev->stop		= bionet_close;
-	dev->hard_start_xmit	= bionet_send_packet;
-	dev->get_stats		= net_get_stats;
-
-	/* Fill in the fields of the device structure with ethernet-generic
-	 * values. This should be in a common file instead of per-driver.
-	 */
-
-	for (i = 0; i < ETH_ALEN; i++) {
-#if 0
-		dev->broadcast[i] = 0xff;
-#endif
-		dev->dev_addr[i]  = station_addr[i];
-	}
-	err = register_netdev(dev);
-	if (!err)
-		return dev;
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-/* Open/initialize the board.  This is called (in the current kernel)
-   sometime after booting when the 'ifconfig' program is run.
-
-   This routine should set everything up anew at each open, even
-   registers that "should" only need to be set once at boot, so that
-   there is non-reboot way to recover if something goes wrong.
- */
-static int
-bionet_open(struct net_device *dev) {
-	struct net_local *lp = netdev_priv(dev);
-
-	if (bionet_debug > 0)
-		printk("bionet_open\n");
-	stdma_lock(bionet_intr, NULL);
-
-	/* Reset the hardware here.
-	 */
-	set_status(4);
-	lp->open_time = 0;	/*jiffies*/
-	lp->poll_time = MAX_POLL_TIME;
-
-	dev->tbusy = 0;
-	dev->interrupt = 0;
-	dev->start = 1;
-
-	stdma_release();
-	bionet_timer.data = (long)dev;
-	bionet_timer.expires = jiffies + lp->poll_time;
-	add_timer(&bionet_timer);
-	return 0;
-}
-
-static int
-bionet_send_packet(struct sk_buff *skb, struct net_device *dev) {
-	struct net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	/* Block a timer-based transmit from overlapping.  This could better be
-	 * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
-	 */
-	local_irq_save(flags);
-
-	if (stdma_islocked()) {
-		local_irq_restore(flags);
-		lp->stats.tx_errors++;
-	}
-	else {
-		int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-		unsigned long buf = virt_to_phys(skb->data);
-		int stat;
-
-		stdma_lock(bionet_intr, NULL);
-		local_irq_restore(flags);
-		if( !STRAM_ADDR(buf+length-1) ) {
-			skb_copy_from_linear_data(skb, nic_packet->buffer,
-						  length);
-			buf = (unsigned long)&((struct nic_pkt_s *)phys_nic_packet)->buffer;
-		}
-
-		if (bionet_debug >1) {
-			u_char *data = nic_packet->buffer, *p;
-			int i;
-
-			printk( "%s: TX pkt type 0x%4x from ", dev->name,
-				  ((u_short *)data)[6]);
-
-			for( p = &data[6], i = 0; i < 6; i++ )
-				printk("%02x%s", *p++,i != 5 ? ":" : "" );
-			printk(" to ");
-
-			for( p = data, i = 0; i < 6; i++ )
-				printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
-
-			printk( "%s: ", dev->name );
-			printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
-			       " %02x%02x%02x%02x len %d\n",
-				  data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
-				  data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
-				  data[28], data[29], data[30], data[31], data[32], data[33],
-				  length );
-		}
-		dma_cache_maintenance(buf, length, 1);
-
-		stat = hardware_send_packet(buf, length);
-		ENABLE_IRQ();
-		stdma_release();
-
-		dev->trans_start = jiffies;
-		dev->tbusy	 = 0;
-		lp->stats.tx_packets++;
-		lp->stats.tx_bytes+=length;
-	}
-	dev_kfree_skb(skb);
-
-	return 0;
-}
-
-/* We have a good packet(s), get it/them out of the buffers.
- */
-static void
-bionet_poll_rx(struct net_device *dev) {
-	struct net_local *lp = netdev_priv(dev);
-	int boguscount = 10;
-	int pkt_len, status;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* ++roman: Take care at locking the ST-DMA... This must be done with ints
-	 * off, since otherwise an int could slip in between the question and the
-	 * locking itself, and then we'd go to sleep... And locking itself is
-	 * necessary to keep the floppy_change timer from working with ST-DMA
-	 * registers. */
-	if (stdma_islocked()) {
-		local_irq_restore(flags);
-		return;
-	}
-	stdma_lock(bionet_intr, NULL);
-	DISABLE_IRQ();
-	local_irq_restore(flags);
-
-	if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
-
-	while(boguscount--) {
-		status = get_frame((unsigned long)phys_nic_packet, 0);
-
-		if( status == 0 ) break;
-
-		/* Good packet... */
-
-		dma_cache_maintenance((unsigned long)phys_nic_packet, 1520, 0);
-
-		pkt_len = (nic_packet->l_hi << 8) | nic_packet->l_lo;
-
-		lp->poll_time = bionet_min_poll_time;    /* fast poll */
-		if( pkt_len >= 60 && pkt_len <= 1520 ) {
-					/*	^^^^ war 1514  KHL */
-			/* Malloc up new buffer.
-			 */
-			struct sk_buff *skb = dev_alloc_skb( pkt_len + 2 );
-			if (skb == NULL) {
-				printk("%s: Memory squeeze, dropping packet.\n",
-					dev->name);
-				lp->stats.rx_dropped++;
-				break;
-			}
-
-			skb_reserve( skb, 2 );		/* 16 Byte align  */
-			skb_put( skb, pkt_len );	/* make room */
-
-			/* 'skb->data' points to the start of sk_buff data area.
-			 */
-			skb_copy_to_linear_data(skb, nic_packet->buffer,
-						pkt_len);
-			skb->protocol = eth_type_trans( skb, dev );
-			netif_rx(skb);
-			dev->last_rx = jiffies;
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes+=pkt_len;
-
-	/* If any worth-while packets have been received, dev_rint()
-	   has done a mark_bh(INET_BH) for us and will work on them
-	   when we get to the bottom-half routine.
-	 */
-
- 			if (bionet_debug >1) {
- 				u_char *data = nic_packet->buffer, *p;
- 				int i;
-
- 				printk( "%s: RX pkt type 0x%4x from ", dev->name,
- 					  ((u_short *)data)[6]);
-
-
- 				for( p = &data[6], i = 0; i < 6; i++ )
- 					printk("%02x%s", *p++,i != 5 ? ":" : "" );
- 				printk(" to ");
- 				for( p = data, i = 0; i < 6; i++ )
- 					printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
-
- 				printk( "%s: ", dev->name );
- 				printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
- 				       " %02x%02x%02x%02x len %d\n",
- 					  data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
- 					  data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
- 					  data[28], data[29], data[30], data[31], data[32], data[33],
- 						  pkt_len );
- 			}
- 		}
- 		else {
- 			printk(" Packet has wrong length: %04d bytes\n", pkt_len);
- 			lp->stats.rx_errors++;
- 		}
- 	}
-	stdma_release();
-	ENABLE_IRQ();
-	return;
-}
-
-/* bionet_tick: called by bionet_timer. Reads packets from the adapter,
- * passes them to the higher layers and restarts the timer.
- */
-static void
-bionet_tick(unsigned long data) {
-	struct net_device	 *dev = (struct net_device *)data;
-	struct net_local *lp = netdev_priv(dev);
-
-	if( bionet_debug > 0 && (lp->open_time++ & 7) == 8 )
-		printk("bionet_tick: %ld\n", lp->open_time);
-
-	if( !stdma_islocked() ) bionet_poll_rx(dev);
-
-	bionet_timer.expires = jiffies + lp->poll_time;
-	add_timer(&bionet_timer);
-}
-
-/* The inverse routine to bionet_open().
- */
-static int
-bionet_close(struct net_device *dev) {
-	struct net_local *lp = netdev_priv(dev);
-
-	if (bionet_debug > 0)
-		printk("bionet_close, open_time=%ld\n", lp->open_time);
-	del_timer(&bionet_timer);
-	stdma_lock(bionet_intr, NULL);
-
-	set_status(0);
-	lp->open_time = 0;
-
-	dev->tbusy = 1;
-	dev->start = 0;
-
-	stdma_release();
-	return 0;
-}
-
-/* Get the current statistics.
-   This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	return &lp->stats;
-}
-
-
-#ifdef MODULE
-
-static struct net_device *bio_dev;
-
-int init_module(void)
-{
-	bio_dev = bionet_probe(-1);
-	if (IS_ERR(bio_dev))
-		return PTR_ERR(bio_dev);
-	return 0;
-}
-
-void cleanup_module(void)
-{
-	unregister_netdev(bio_dev);
-	free_netdev(bio_dev);
-}
-
-#endif /* MODULE */
-
-/* Local variables:
- *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
-	-b m68k-linuxaout -Wall -Wstrict-prototypes -O2
-	-fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c bionet.c"
- *  version-control: t
- *  kept-new-versions: 5
- *  tab-width: 8
- * End:
- */
diff --git a/drivers/net/atari_pamsnet.c b/drivers/net/atari_pamsnet.c
deleted file mode 100644
index f7356374a2e..00000000000
--- a/drivers/net/atari_pamsnet.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/* atari_pamsnet.c     PAMsNet device driver for linux68k.
- *
- * Version:	@(#)PAMsNet.c	0.2ß	03/31/96
- *
- * Author:  Torsten Lang <Torsten.Lang@ap.physik.uni-giessen.de>
- *                       <Torsten.Lang@jung.de>
- *
- * This driver is based on my driver PAMSDMA.c for MiNT-Net and
- * on the driver bionet.c written by
- *          Hartmut Laue <laue@ifk-mp.uni-kiel.de>
- * and      Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
- *
- * Little adaptions for integration into pl7 by Roman Hodek
- *
-	What is it ?
-	------------
-	This driver controls the PAMsNet LAN-Adapter which connects
-	an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
-
-	This version can be compiled as a loadable module (See the
-	compile command at the bottom of this file).
-	At load time, you can optionally set the debugging level and the
-	fastest response time on the command line of 'insmod'.
-
-	'pamsnet_debug'
-		controls the amount of diagnostic messages:
-	  0  : no messages
-	  >0 : see code for meaning of printed messages
-
-	'pamsnet_min_poll_time' (always >=1)
-		gives the time (in jiffies) between polls. Low values
-		increase the system load (beware!)
-
-	When loaded, a net device with the name 'eth?' becomes available,
-	which can be controlled with the usual 'ifconfig' command.
-
-	It is possible to compile this driver into the kernel like other
-	(net) drivers. For this purpose, some source files (e.g. config-files
-	makefiles, Space.c) must be changed accordingly. (You may refer to
-	other drivers how to do it.) In this case, the device will be detected
-	at boot time and (probably) appear as 'eth0'.
-
-	Theory of Operation
-	-------------------
-	Because the ATARI DMA port is usually shared between several
-	devices (eg. harddisk, floppy) we cannot block the ACSI bus
-	while waiting for interrupts. Therefore we use a polling mechanism
-	to fetch packets from the adapter. For the same reason, we send
-	packets without checking that the previous packet has been sent to
-	the LAN. We rely on the higher levels of the networking code to detect
-	missing packets and resend them.
-
-	Before we access the ATARI DMA controller, we check if another
-	process is using the DMA. If not, we lock the DMA, perform one or
-	more packet transfers and unlock the DMA before returning.
-	We do not use 'stdma_lock' unconditionally because it is unclear
-	if the networking code can be set to sleep, which will happen if
-	another (possibly slow) device is using the DMA controller.
-
-	The polling is done via timer interrupts which periodically
-	'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
-	between polls varies depending on an estimate of the net activity.
-	The allowed range is given by the variable 'bionet_min_poll_time'
-	for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
-	for the higher (slowest) limit.
-
-	Whenever a packet arrives, we switch to fastest response by setting
-	the polling time to its lowest limit. If the following poll fails,
-	because no packets have arrived, we increase the time for the next
-	poll. When the net activity is low, the polling time effectively
-	stays at its maximum value, resulting in the lowest load for the
-	machine.
- */
-
-#define MAX_POLL_TIME	10
-
-static char *version =
-	"pamsnet.c:v0.2beta 30-mar-96 (c) Torsten Lang.\n";
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/bitops.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/errno.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_acsi.h>
-
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#undef READ
-#undef WRITE
-
-/* use 0 for production, 1 for verification, >2 for debug
- */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-/*
- * Global variable 'pamsnet_debug'. Can be set at load time by 'insmod'
- */
-unsigned int pamsnet_debug = NET_DEBUG;
-module_param(pamsnet_debug, int, 0);
-MODULE_PARM_DESC(pamsnet_debug, "pamsnet debug enable (0-1)");
-MODULE_LICENSE("GPL");
-
-static unsigned int pamsnet_min_poll_time = 2;
-
-
-/* Information that need to be kept for each board.
- */
-struct net_local {
-	struct net_device_stats stats;
-	long open_time;			/* for debugging */
-	int  poll_time;			/* polling time varies with net load */
-};
-
-static struct nic_pkt_s {		/* packet format */
-	unsigned char	buffer[2048];
-} *nic_packet = 0;
-unsigned char *phys_nic_packet;
-
-typedef unsigned char HADDR[6]; /* 6-byte hardware address of lance */
-
-/* Index to functions, as function prototypes.
- */
-static void	start (int target);
-static int	stop (int target);
-static int	testpkt (int target);
-static int	sendpkt (int target, unsigned char *buffer, int length);
-static int	receivepkt (int target, unsigned char *buffer);
-static int	inquiry (int target, unsigned char *buffer);
-static HADDR	*read_hw_addr(int target, unsigned char *buffer);
-static void	setup_dma (void *address, unsigned rw_flag, int num_blocks);
-static int	send_first (int target, unsigned char byte);
-static int	send_1_5 (int lun, unsigned char *command, int dma);
-static int	get_status (void);
-static int	calc_received (void *start_address);
-
-static int pamsnet_open(struct net_device *dev);
-static int pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void pamsnet_poll_rx(struct net_device *);
-static int pamsnet_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void pamsnet_tick(unsigned long);
-
-static irqreturn_t pamsnet_intr(int irq, void *data);
-
-static DEFINE_TIMER(pamsnet_timer, pamsnet_tick, 0, 0);
-
-#define STRAM_ADDR(a)	(((a) & 0xff000000) == 0)
-
-typedef struct
-{
-	unsigned char reserved1[0x38];
-	HADDR  hwaddr;
-	unsigned char reserved2[0x1c2];
-} DMAHWADDR;
-
-/*
- * Definitions of commands understood by the PAMs DMA adaptor.
- *
- * In general the DMA adaptor uses LUN 0, 5, 6 and 7 on one ID changeable
- * by the PAM's Net software.
- *
- * LUN 0 works as a harddisk. You can boot the PAM's Net driver there.
- * LUN 5 works as a harddisk and lets you access the RAM and some I/O HW
- *       area. In sector 0, bytes 0x38-0x3d you find the ethernet HW address
- *       of the adaptor.
- * LUN 6 works as a harddisk and lets you access the firmware ROM.
- * LUN 7 lets you send and receive packets.
- *
- * Some commands like the INQUIRY command work identical on all used LUNs.
- *
- * UNKNOWN1 seems to read some data.
- *          Command length is 6 bytes.
- * UNKNOWN2 seems to read some data (command byte 1 must be !=0). The
- *          following bytes seem to be something like an allocation length.
- *          Command length is 6 bytes.
- * READPKT  reads a packet received by the DMA adaptor.
- *          Command length is 6 bytes.
- * WRITEPKT sends a packet transferred by the following DMA phase. The length
- *          of the packet is transferred in command bytes 3 and 4.
- *          The adaptor automatically replaces the src hw address in an ethernet
- *          packet by its own hw address.
- *          Command length is 6 bytes.
- * INQUIRY  has the same function as the INQUIRY command supported by harddisks
- *          and other SCSI devices. It lets you detect which device you found
- *          at a given address.
- *          Command length is 6 bytes.
- * START    initializes the DMA adaptor. After this command it is able to send
- *          and receive packets. There is no status byte returned!
- *          Command length is 1 byte.
- * NUMPKTS  gives back the number of received packets waiting in the queue in
- *          the status byte.
- *          Command length is 1 byte.
- * UNKNOWN3
- * UNKNOWN4 Function of these three commands is unknown.
- * UNKNOWN5 The command length of these three commands is 1 byte.
- * DESELECT immediately deselects the DMA adaptor. May important with interrupt
- *          driven operation.
- *          Command length is 1 byte.
- * STOP     resets the DMA adaptor. After this command packets can no longer
- *          be received or transferred.
- *          Command length is 6 byte.
- */
-
-enum {UNKNOWN1=3, READPKT=8, UNKNOWN2, WRITEPKT=10, INQUIRY=18, START,
-      NUMPKTS=22, UNKNOWN3, UNKNOWN4, UNKNOWN5, DESELECT, STOP};
-
-#define READSECTOR  READPKT
-#define WRITESECTOR WRITEPKT
-
-u_char *inquire8="MV      PAM's NET/GK";
-
-#define DMALOW   dma_wd.dma_lo
-#define DMAMID   dma_wd.dma_md
-#define DMAHIGH  dma_wd.dma_hi
-#define DACCESS  dma_wd.fdc_acces_seccount
-
-#define MFP_GPIP mfp.par_dt_reg
-
-/* Some useful functions */
-
-#define INT      (!(MFP_GPIP & 0x20))
-#define DELAY ({MFP_GPIP; MFP_GPIP; MFP_GPIP;})
-#define WRITEMODE(value)					\
-	({	u_short dummy = value;				\
-		__asm__ volatile("movew %0, 0xFFFF8606" : : "d"(dummy));	\
-		DELAY;						\
-	})
-#define WRITEBOTH(value1, value2)				\
-	({	u_long dummy = (u_long)(value1)<<16 | (u_short)(value2);	\
-		__asm__ volatile("movel %0, 0xFFFF8604" : : "d"(dummy));	\
-		DELAY;						\
-	})
-
-/* Definitions for DMODE */
-
-#define READ        0x000
-#define WRITE       0x100
-
-#define DMA_FDC     0x080
-#define DMA_ACSI    0x000
-
-#define DMA_DISABLE 0x040
-
-#define SEC_COUNT   0x010
-#define DMA_WINDOW  0x000
-
-#define REG_ACSI    0x008
-#define REG_FDC     0x000
-
-#define A1          0x002
-
-/* Timeout constants */
-
-#define TIMEOUTCMD HZ/2   /* ca. 500ms */
-#define TIMEOUTDMA HZ     /* ca. 1s */
-#define COMMAND_DELAY 500 /* ca. 0.5ms */
-
-unsigned rw;
-int lance_target = -1;
-int if_up = 0;
-
-/* The following routines access the ethernet board connected to the
- * ACSI port via the st_dma chip.
- */
-
-/* The following lowlevel routines work on physical addresses only and assume
- * that eventually needed buffers are
- * - completely located in ST RAM
- * - are contigous in the physical address space
- */
-
-/* Setup the DMA counter */
-
-static void
-setup_dma (void *address, unsigned rw_flag, int num_blocks)
-{
-	WRITEMODE((unsigned) rw_flag          | DMA_FDC | SEC_COUNT | REG_ACSI |
-		  A1);
-	WRITEMODE((unsigned)(rw_flag ^ WRITE) | DMA_FDC | SEC_COUNT | REG_ACSI |
-		  A1);
-	WRITEMODE((unsigned) rw_flag          | DMA_FDC | SEC_COUNT | REG_ACSI |
-		  A1);
-	DMALOW  = (unsigned char)((unsigned long)address & 0xFF);
-	DMAMID  = (unsigned char)(((unsigned long)address >>  8) & 0xFF);
-	DMAHIGH = (unsigned char)(((unsigned long)address >> 16) & 0xFF);
-	WRITEBOTH((unsigned)num_blocks & 0xFF,
-		  rw_flag | DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
-	rw = rw_flag;
-}
-
-/* Send the first byte of an command block */
-
-static int
-send_first (int target, unsigned char byte)
-{
-	rw = READ;
-	acsi_delay_end(COMMAND_DELAY);
-	/*
-	 * wake up ACSI
-	 */
-	WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI);
-	/*
-	 * write command byte
-	 */
-	WRITEBOTH((target << 5) | (byte & 0x1F), DMA_FDC |
-	          DMA_WINDOW | REG_ACSI | A1);
-	return (!acsi_wait_for_IRQ(TIMEOUTCMD));
-}
-
-/* Send the rest of an command block */
-
-static int
-send_1_5 (int lun, unsigned char *command, int dma)
-{
-	int i, j;
-
-	for (i=0; i<5; i++) {
-		WRITEBOTH((!i ? (((lun & 0x7) << 5) | (command[i] & 0x1F))
-			      : command[i]),
-			  rw | REG_ACSI | DMA_WINDOW |
-			   ((i < 4) ? DMA_FDC
-				    : (dma ? DMA_ACSI
-					   : DMA_FDC)) | A1);
-		if (i < 4 && (j = !acsi_wait_for_IRQ(TIMEOUTCMD)))
-			return (j);
-	}
-	return (0);
-}
-
-/* Read a status byte */
-
-static int
-get_status (void)
-{
-	WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
-	acsi_delay_start();
-	return ((int)(DACCESS & 0xFF));
-}
-
-/* Calculate the number of received bytes */
-
-static int
-calc_received (void *start_address)
-{
-	return (int)(
-		(((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
-	      - (unsigned long)start_address);
-}
-
-/* The following midlevel routines still work on physical addresses ... */
-
-/* start() starts the PAM's DMA adaptor */
-
-static void
-start (int target)
-{
-	send_first(target, START);
-}
-
-/* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
-
-static int
-stop (int target)
-{
-	int ret = -1;
-	unsigned char cmd_buffer[5];
-
-	if (send_first(target, STOP))
-		goto bad;
-	cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] =
-	cmd_buffer[3] = cmd_buffer[4] = 0;
-	if (send_1_5(7, cmd_buffer, 0) ||
-	    !acsi_wait_for_IRQ(TIMEOUTDMA) ||
-	    get_status())
-		goto bad;
-	ret = 0;
-bad:
-	return (ret);
-}
-
-/* testpkt() returns the number of received packets waiting in the queue */
-
-static int
-testpkt(int target)
-{
-	int ret = -1;
-
-	if (send_first(target, NUMPKTS))
-		goto bad;
-	ret = get_status();
-bad:
-	return (ret);
-}
-
-/* inquiry() returns 0 when PAM's DMA found, -1 when timeout, -2 otherwise */
-/* Please note: The buffer is for internal use only but must be defined!   */
-
-static int
-inquiry (int target, unsigned char *buffer)
-{
-	int ret = -1;
-	unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
-	unsigned char cmd_buffer[5];
-
-	if (send_first(target, INQUIRY))
-		goto bad;
-	setup_dma(buffer, READ, 1);
-	vbuffer[8] = vbuffer[27] = 0; /* Avoid confusion with previous read data */
-	cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
-	cmd_buffer[3] = 48;
-	if (send_1_5(5, cmd_buffer, 1) ||
-	    !acsi_wait_for_IRQ(TIMEOUTDMA) ||
-	    get_status() ||
-	    (calc_received(buffer) < 32))
-		goto bad;
-	dma_cache_maintenance((unsigned long)(buffer+8), 20, 0);
-	if (memcmp(inquire8, vbuffer+8, 20))
-		goto bad;
-	ret = 0;
-bad:
-	if (!!NET_DEBUG) {
-		vbuffer[8+20]=0;
-		printk("inquiry of target %d: %s\n", target, vbuffer+8);
-	}
-	return (ret);
-}
-
-/*
- * read_hw_addr() reads the sector containing the hwaddr and returns
- * a pointer to it (virtual address!) or 0 in case of an error
- */
-
-static HADDR
-*read_hw_addr(int target, unsigned char *buffer)
-{
-	HADDR *ret = 0;
-	unsigned char cmd_buffer[5];
-
-	if (send_first(target, READSECTOR))
-		goto bad;
-	setup_dma(buffer, READ, 1);
-	cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
-	cmd_buffer[3] = 1;
-	if (send_1_5(5, cmd_buffer, 1) ||
-	    !acsi_wait_for_IRQ(TIMEOUTDMA) ||
-	    get_status())
-		goto bad;
-	ret = phys_to_virt((unsigned long)&(((DMAHWADDR *)buffer)->hwaddr));
-	dma_cache_maintenance((unsigned long)buffer, 512, 0);
-bad:
-	return (ret);
-}
-
-static irqreturn_t
-pamsnet_intr(int irq, void *data)
-{
-	return IRQ_HANDLED;
-}
-
-/* receivepkt() loads a packet to a given buffer and returns its length */
-
-static int
-receivepkt (int target, unsigned char *buffer)
-{
-	int ret = -1;
-	unsigned char cmd_buffer[5];
-
-	if (send_first(target, READPKT))
-		goto bad;
-	setup_dma(buffer, READ, 3);
-	cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
-	cmd_buffer[3] = 3;
-	if (send_1_5(7, cmd_buffer, 1) ||
-	    !acsi_wait_for_IRQ(TIMEOUTDMA) ||
-	    get_status())
-		goto bad;
-	ret = calc_received(buffer);
-bad:
-	return (ret);
-}
-
-/* sendpkt() sends a packet and returns a value of zero when the packet was sent
-             successfully */
-
-static int
-sendpkt (int target, unsigned char *buffer, int length)
-{
-	int ret = -1;
-	unsigned char cmd_buffer[5];
-
-	if (send_first(target, WRITEPKT))
-		goto bad;
-	setup_dma(buffer, WRITE, 3);
-	cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[4] = 0;
-	cmd_buffer[2] = length >> 8;
-	cmd_buffer[3] = length & 0xFF;
-	if (send_1_5(7, cmd_buffer, 1) ||
-	    !acsi_wait_for_IRQ(TIMEOUTDMA) ||
-	    get_status())
-		goto bad;
-	ret = 0;
-bad:
-	return (ret);
-}
-
-/* The following higher level routines work on virtual addresses and convert them to
- * physical addresses when passed to the lowlevel routines. It's up to the higher level
- * routines to copy data from Alternate RAM to ST RAM if neccesary!
- */
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- */
-
-struct net_device * __init pamsnet_probe (int unit)
-{
-	struct net_device *dev;
-	int i;
-	HADDR *hwaddr;
-	int err;
-
-	unsigned char station_addr[6];
-	static unsigned version_printed;
-	/* avoid "Probing for..." printed 4 times - the driver is supporting only one adapter now! */
-	static int no_more_found;
-
-	if (no_more_found)
-		return ERR_PTR(-ENODEV);
-	no_more_found = 1;
-
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-	SET_MODULE_OWNER(dev);
-
-	printk("Probing for PAM's Net/GK Adapter...\n");
-
-	/* Allocate the DMA buffer here since we need it for probing! */
-
-	nic_packet = (struct nic_pkt_s *)acsi_buffer;
-	phys_nic_packet = (unsigned char *)phys_acsi_buffer;
-	if (pamsnet_debug > 0) {
-		printk("nic_packet at 0x%p, phys at 0x%p\n",
-			   nic_packet, phys_nic_packet );
-	}
-
-	stdma_lock(pamsnet_intr, NULL);
-	DISABLE_IRQ();
-
-	for (i=0; i<8; i++) {
-		/* Do two inquiries to cover cases with strange equipment on previous ID */
-		/* blocking the ACSI bus (like the SLMC804 laser printer controller...   */
-		inquiry(i, phys_nic_packet);
-		if (!inquiry(i, phys_nic_packet)) {
-			lance_target = i;
-			break;
-		}
-	}
-
-	if (!!NET_DEBUG)
-		printk("ID: %d\n",i);
-
-	if (lance_target >= 0) {
-		if (!(hwaddr = read_hw_addr(lance_target, phys_nic_packet)))
-			lance_target = -1;
-		else
-			memcpy (station_addr, hwaddr, ETH_ALEN);
-	}
-
-	ENABLE_IRQ();
-	stdma_release();
-
-	if (lance_target < 0) {
-		printk("No PAM's Net/GK found.\n");
-		free_netdev(dev);
-		return ERR_PTR(-ENODEV);
-	}
-
-	if (pamsnet_debug > 0 && version_printed++ == 0)
-		printk(version);
-
-	printk("%s: %s found on target %01d, eth-addr: %02x:%02x:%02x:%02x:%02x:%02x.\n",
-		dev->name, "PAM's Net/GK", lance_target,
-		station_addr[0], station_addr[1], station_addr[2],
-		station_addr[3], station_addr[4], station_addr[5]);
-
-	/* Initialize the device structure. */
-	dev->open		= pamsnet_open;
-	dev->stop		= pamsnet_close;
-	dev->hard_start_xmit	= pamsnet_send_packet;
-	dev->get_stats		= net_get_stats;
-
-	/* Fill in the fields of the device structure with ethernet-generic
-	 * values. This should be in a common file instead of per-driver.
-	 */
-
-	for (i = 0; i < ETH_ALEN; i++) {
-#if 0
-		dev->broadcast[i] = 0xff;
-#endif
-		dev->dev_addr[i]  = station_addr[i];
-	}
-	err = register_netdev(dev);
-	if (!err)
-		return dev;
-
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-/* Open/initialize the board.  This is called (in the current kernel)
-   sometime after booting when the 'ifconfig' program is run.
-
-   This routine should set everything up anew at each open, even
-   registers that "should" only need to be set once at boot, so that
-   there is non-reboot way to recover if something goes wrong.
- */
-static int
-pamsnet_open(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-
-	if (pamsnet_debug > 0)
-		printk("pamsnet_open\n");
-	stdma_lock(pamsnet_intr, NULL);
-	DISABLE_IRQ();
-
-	/* Reset the hardware here.
-	 */
-	if (!if_up)
-		start(lance_target);
-	if_up = 1;
-	lp->open_time = 0;	/*jiffies*/
-	lp->poll_time = MAX_POLL_TIME;
-
-	dev->tbusy = 0;
-	dev->interrupt = 0;
-	dev->start = 1;
-
-	ENABLE_IRQ();
-	stdma_release();
-	pamsnet_timer.data = (long)dev;
-	pamsnet_timer.expires = jiffies + lp->poll_time;
-	add_timer(&pamsnet_timer);
-	return 0;
-}
-
-static int
-pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	/* Block a timer-based transmit from overlapping.  This could better be
-	 * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
-	 */
-	local_irq_save(flags);
-
-	if (stdma_islocked()) {
-		local_irq_restore(flags);
-		lp->stats.tx_errors++;
-	}
-	else {
-		int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-		unsigned long buf = virt_to_phys(skb->data);
-		int stat;
-
-		stdma_lock(pamsnet_intr, NULL);
-		DISABLE_IRQ();
-
-		local_irq_restore(flags);
-		if( !STRAM_ADDR(buf+length-1) ) {
-			skb_copy_from_linear_data(skb, nic_packet->buffer,
-						  length);
-			buf = (unsigned long)phys_nic_packet;
-		}
-
-		dma_cache_maintenance(buf, length, 1);
-
-		stat = sendpkt(lance_target, (unsigned char *)buf, length);
-		ENABLE_IRQ();
-		stdma_release();
-
-		dev->trans_start = jiffies;
-		dev->tbusy	 = 0;
-		lp->stats.tx_packets++;
-		lp->stats.tx_bytes+=length;
-	}
-	dev_kfree_skb(skb);
-
-	return 0;
-}
-
-/* We have a good packet(s), get it/them out of the buffers.
- */
-static void
-pamsnet_poll_rx(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int boguscount;
-	int pkt_len;
-	struct sk_buff *skb;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* ++roman: Take care at locking the ST-DMA... This must be done with ints
-	 * off, since otherwise an int could slip in between the question and the
-	 * locking itself, and then we'd go to sleep... And locking itself is
-	 * necessary to keep the floppy_change timer from working with ST-DMA
-	 * registers. */
-	if (stdma_islocked()) {
-		local_irq_restore(flags);
-		return;
-	}
-	stdma_lock(pamsnet_intr, NULL);
-	DISABLE_IRQ();
-	local_irq_restore(flags);
-
-	boguscount = testpkt(lance_target);
-	if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
-
-	while(boguscount--) {
-		pkt_len = receivepkt(lance_target, phys_nic_packet);
-
-		if( pkt_len < 60 ) break;
-
-		/* Good packet... */
-
-		dma_cache_maintenance((unsigned long)phys_nic_packet, pkt_len, 0);
-
-		lp->poll_time = pamsnet_min_poll_time;    /* fast poll */
-		if( pkt_len >= 60 && pkt_len <= 2048 ) {
-			if (pkt_len > 1514)
-				pkt_len = 1514;
-
-			/* Malloc up new buffer.
-			 */
-			skb = alloc_skb(pkt_len, GFP_ATOMIC);
-			if (skb == NULL) {
-				printk("%s: Memory squeeze, dropping packet.\n",
-					dev->name);
-				lp->stats.rx_dropped++;
-				break;
-			}
-			skb->len = pkt_len;
-			skb->dev = dev;
-
-			/* 'skb->data' points to the start of sk_buff data area.
-			 */
-			skb_copy_to_linear_data(skb, nic_packet->buffer,
-						pkt_len);
-			netif_rx(skb);
-			dev->last_rx = jiffies;
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes+=pkt_len;
-		}
-	}
-
-	/* If any worth-while packets have been received, dev_rint()
-	   has done a mark_bh(INET_BH) for us and will work on them
-	   when we get to the bottom-half routine.
-	 */
-
-	ENABLE_IRQ();
-	stdma_release();
-	return;
-}
-
-/* pamsnet_tick: called by pamsnet_timer. Reads packets from the adapter,
- * passes them to the higher layers and restarts the timer.
- */
-static void
-pamsnet_tick(unsigned long data)
-{
-	struct net_device	 *dev = (struct net_device *)data;
-	struct net_local *lp = netdev_priv(dev);
-
-	if( pamsnet_debug > 0 && (lp->open_time++ & 7) == 8 )
-		printk("pamsnet_tick: %ld\n", lp->open_time);
-
-	pamsnet_poll_rx(dev);
-
-	pamsnet_timer.expires = jiffies + lp->poll_time;
-	add_timer(&pamsnet_timer);
-}
-
-/* The inverse routine to pamsnet_open().
- */
-static int
-pamsnet_close(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-
-	if (pamsnet_debug > 0)
-		printk("pamsnet_close, open_time=%ld\n", lp->open_time);
-	del_timer(&pamsnet_timer);
-	stdma_lock(pamsnet_intr, NULL);
-	DISABLE_IRQ();
-
-	if (if_up)
-		stop(lance_target);
-	if_up = 0;
-
-	lp->open_time = 0;
-
-	dev->tbusy = 1;
-	dev->start = 0;
-
-	ENABLE_IRQ();
-	stdma_release();
-	return 0;
-}
-
-/* Get the current statistics.
-   This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	return &lp->stats;
-}
-
-
-#ifdef MODULE
-
-static struct net_device *pam_dev;
-
-int init_module(void)
-{
-	pam_dev = pamsnet_probe(-1);
-	if (IS_ERR(pam_dev))
-		return PTR_ERR(pam_dev);
-	return 0;
-}
-
-void cleanup_module(void)
-{
-	unregister_netdev(pam_dev);
-	free_netdev(pam_dev);
-}
-
-#endif /* MODULE */
-
-/* Local variables:
- *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
-	-b m68k-linuxaout -Wall -Wstrict-prototypes -O2
-	-fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c atari_pamsnet.c"
- *  version-control: t
- *  kept-new-versions: 5
- *  tab-width: 8
- * End:
- */