Merge branch 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-omap: fix type of irq handler function
  i2c-s3c2410: Change IRQ to be plain integer.
  i2c-s3c2410: Allow more than one i2c-s3c2410 adapter
  i2c-s3c2410: Remove default platform data.
  i2c-s3c2410: Use platform data for gpio configuration
  i2c-s3c2410: Fixup style problems from checkpatch.pl
  i2c-omap: Enable I2C wakeups for 34xx
  i2c-omap: reprogram OCP_SYSCONFIG register after reset
  i2c-omap: convert 'rev1' flag to generic 'rev' u8
  i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
  i2c-omap: Clean-up i2c-omap
  i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
  i2c-omap: Mark init-only functions as __init
  i2c-omap: Add support for omap34xx
  i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
  i2c-omap: Add high-speed support to omap-i2c
  i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr()
  i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg

Fix up apparently-trivial conflict in drivers/i2c/busses/i2c-s3c2410.c

2 files changed, 406 insertions, 199 deletions

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 608038d64f8..be8ee2cac8b 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -2,13 +2,16 @@
  * TI OMAP I2C master mode driver
  *
  * Copyright (C) 2003 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- *
- * Updated to work with multiple I2C interfaces on 24xx by
- * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
  * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2007 Texas Instruments.
  *
- * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
+ * Originally written by MontaVista Software, Inc.
+ * Additional contributions by:
+ *	Tony Lindgren <tony@atomide.com>
+ *	Imre Deak <imre.deak@nokia.com>
+ *	Juha Yrjölä <juha.yrjola@solidboot.com>
+ *	Syed Khasim <x0khasim@ti.com>
+ *	Nishant Menon <nm@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -33,8 +36,14 @@
 #include <linux/completion.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/io.h>
+
+/* I2C controller revisions */
+#define OMAP_I2C_REV_2			0x20
 
-#include <asm/io.h>
+/* I2C controller revisions present on specific hardware */
+#define OMAP_I2C_REV_ON_2430		0x36
+#define OMAP_I2C_REV_ON_3430		0x3C
 
 /* timeout waiting for the controller to respond */
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -43,6 +52,8 @@
 #define OMAP_I2C_IE_REG			0x04
 #define OMAP_I2C_STAT_REG		0x08
 #define OMAP_I2C_IV_REG			0x0c
+/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
+#define OMAP_I2C_WE_REG			0x0c
 #define OMAP_I2C_SYSS_REG		0x10
 #define OMAP_I2C_BUF_REG		0x14
 #define OMAP_I2C_CNT_REG		0x18
@@ -55,8 +66,11 @@
 #define OMAP_I2C_SCLL_REG		0x34
 #define OMAP_I2C_SCLH_REG		0x38
 #define OMAP_I2C_SYSTEST_REG		0x3c
+#define OMAP_I2C_BUFSTAT_REG		0x40
 
 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
+#define OMAP_I2C_IE_XDR		(1 << 14)	/* TX Buffer drain int enable */
+#define OMAP_I2C_IE_RDR		(1 << 13)	/* RX Buffer drain int enable */
 #define OMAP_I2C_IE_XRDY	(1 << 4)	/* TX data ready int enable */
 #define OMAP_I2C_IE_RRDY	(1 << 3)	/* RX data ready int enable */
 #define OMAP_I2C_IE_ARDY	(1 << 2)	/* Access ready int enable */
@@ -64,7 +78,8 @@
 #define OMAP_I2C_IE_AL		(1 << 0)	/* Arbitration lost int ena */
 
 /* I2C Status Register (OMAP_I2C_STAT): */
-#define OMAP_I2C_STAT_SBD	(1 << 15)	/* Single byte data */
+#define OMAP_I2C_STAT_XDR	(1 << 14)	/* TX Buffer draining */
+#define OMAP_I2C_STAT_RDR	(1 << 13)	/* RX Buffer draining */
 #define OMAP_I2C_STAT_BB	(1 << 12)	/* Bus busy */
 #define OMAP_I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
 #define OMAP_I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
@@ -76,13 +91,34 @@
 #define OMAP_I2C_STAT_NACK	(1 << 1)	/* No ack interrupt enable */
 #define OMAP_I2C_STAT_AL	(1 << 0)	/* Arbitration lost int ena */
 
+/* I2C WE wakeup enable register */
+#define OMAP_I2C_WE_XDR_WE	(1 << 14)	/* TX drain wakup */
+#define OMAP_I2C_WE_RDR_WE	(1 << 13)	/* RX drain wakeup */
+#define OMAP_I2C_WE_AAS_WE	(1 << 9)	/* Address as slave wakeup*/
+#define OMAP_I2C_WE_BF_WE	(1 << 8)	/* Bus free wakeup */
+#define OMAP_I2C_WE_STC_WE	(1 << 6)	/* Start condition wakeup */
+#define OMAP_I2C_WE_GC_WE	(1 << 5)	/* General call wakeup */
+#define OMAP_I2C_WE_DRDY_WE	(1 << 3)	/* TX/RX data ready wakeup */
+#define OMAP_I2C_WE_ARDY_WE	(1 << 2)	/* Reg access ready wakeup */
+#define OMAP_I2C_WE_NACK_WE	(1 << 1)	/* No acknowledgment wakeup */
+#define OMAP_I2C_WE_AL_WE	(1 << 0)	/* Arbitration lost wakeup */
+
+#define OMAP_I2C_WE_ALL		(OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
+				OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
+				OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
+				OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
+				OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
+
 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
 #define OMAP_I2C_BUF_RDMA_EN	(1 << 15)	/* RX DMA channel enable */
+#define OMAP_I2C_BUF_RXFIF_CLR	(1 << 14)	/* RX FIFO Clear */
 #define OMAP_I2C_BUF_XDMA_EN	(1 << 7)	/* TX DMA channel enable */
+#define OMAP_I2C_BUF_TXFIF_CLR	(1 << 6)	/* TX FIFO Clear */
 
 /* I2C Configuration Register (OMAP_I2C_CON): */
 #define OMAP_I2C_CON_EN		(1 << 15)	/* I2C module enable */
 #define OMAP_I2C_CON_BE		(1 << 14)	/* Big endian mode */
+#define OMAP_I2C_CON_OPMODE_HS	(1 << 12)	/* High Speed support */
 #define OMAP_I2C_CON_STB	(1 << 11)	/* Start byte mode (master) */
 #define OMAP_I2C_CON_MST	(1 << 10)	/* Master/slave mode */
 #define OMAP_I2C_CON_TRX	(1 << 9)	/* TX/RX mode (master only) */
@@ -91,6 +127,10 @@
 #define OMAP_I2C_CON_STP	(1 << 1)	/* Stop cond (master only) */
 #define OMAP_I2C_CON_STT	(1 << 0)	/* Start condition (master) */
 
+/* I2C SCL time value when Master */
+#define OMAP_I2C_SCLL_HSSCLL	8
+#define OMAP_I2C_SCLH_HSSCLH	8
+
 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
 #ifdef DEBUG
 #define OMAP_I2C_SYSTEST_ST_EN		(1 << 15)	/* System test enable */
@@ -103,17 +143,19 @@
 #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
 #endif
 
-/* I2C System Status register (OMAP_I2C_SYSS): */
-#define OMAP_I2C_SYSS_RDONE		(1 << 0)	/* Reset Done */
+/* OCP_SYSSTATUS bit definitions */
+#define SYSS_RESETDONE_MASK		(1 << 0)
+
+/* OCP_SYSCONFIG bit definitions */
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
+#define SYSC_SIDLEMODE_MASK		(0x3 << 3)
+#define SYSC_ENAWAKEUP_MASK		(1 << 2)
+#define SYSC_SOFTRESET_MASK		(1 << 1)
+#define SYSC_AUTOIDLE_MASK		(1 << 0)
 
-/* I2C System Configuration Register (OMAP_I2C_SYSC): */
-#define OMAP_I2C_SYSC_SRST		(1 << 1)	/* Soft Reset */
+#define SYSC_IDLEMODE_SMART		0x2
+#define SYSC_CLOCKACTIVITY_FCLK		0x2
 
-/* REVISIT: Use platform_data instead of module parameters */
-/* Fast Mode = 400 kHz, Standard = 100 kHz */
-static int clock = 100; /* Default: 100 kHz */
-module_param(clock, int, 0);
-MODULE_PARM_DESC(clock, "Set I2C clock in kHz: 400=fast mode (default == 100)");
 
 struct omap_i2c_dev {
 	struct device		*dev;
@@ -123,11 +165,17 @@ struct omap_i2c_dev {
 	struct clk		*fclk;		/* Functional clock */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
+	u32			speed;		/* Speed of bus in Khz */
 	u16			cmd_err;
 	u8			*buf;
 	size_t			buf_len;
 	struct i2c_adapter	adapter;
-	unsigned		rev1:1;
+	u8			fifo_size;	/* use as flag and value
+						 * fifo_size==0 implies no fifo
+						 * if set, should be trsh+1
+						 */
+	u8			rev;
+	unsigned		b_hw:1;		/* bad h/w fixes */
 	unsigned		idle:1;
 	u16			iestate;	/* Saved interrupt register */
 };
@@ -143,9 +191,9 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 	return __raw_readw(i2c_dev->base + reg);
 }
 
-static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
+static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 {
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		dev->iclk = clk_get(dev->dev, "i2c_ick");
 		if (IS_ERR(dev->iclk)) {
 			dev->iclk = NULL;
@@ -178,25 +226,33 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 
 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
+	WARN_ON(!dev->idle);
+
 	if (dev->iclk != NULL)
 		clk_enable(dev->iclk);
 	clk_enable(dev->fclk);
+	dev->idle = 0;
 	if (dev->iestate)
 		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
-	dev->idle = 0;
 }
 
 static void omap_i2c_idle(struct omap_i2c_dev *dev)
 {
 	u16 iv;
 
-	dev->idle = 1;
+	WARN_ON(dev->idle);
+
 	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
-	if (dev->rev1)
-		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);	/* Read clears */
-	else
+	if (dev->rev < OMAP_I2C_REV_2) {
+		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+	} else {
 		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
+
+		/* Flush posted write before the dev->idle store occurs */
+		omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+	}
+	dev->idle = 1;
 	clk_disable(dev->fclk);
 	if (dev->iclk != NULL)
 		clk_disable(dev->iclk);
@@ -204,18 +260,20 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
 {
-	u16 psc = 0;
+	u16 psc = 0, scll = 0, sclh = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
 	unsigned long fclk_rate = 12000000;
 	unsigned long timeout;
+	unsigned long internal_clk = 0;
 
-	if (!dev->rev1) {
-		omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
+	if (dev->rev >= OMAP_I2C_REV_2) {
+		omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
 		/* For some reason we need to set the EN bit before the
 		 * reset done bit gets set. */
 		timeout = jiffies + OMAP_I2C_TIMEOUT;
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 		while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
-			 OMAP_I2C_SYSS_RDONE)) {
+			 SYSS_RESETDONE_MASK)) {
 			if (time_after(jiffies, timeout)) {
 				dev_warn(dev->dev, "timeout waiting "
 						"for controller reset\n");
@@ -223,6 +281,33 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			}
 			msleep(1);
 		}
+
+		/* SYSC register is cleared by the reset; rewrite it */
+		if (dev->rev == OMAP_I2C_REV_ON_2430) {
+
+			omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
+					   SYSC_AUTOIDLE_MASK);
+
+		} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
+			u32 v;
+
+			v = SYSC_AUTOIDLE_MASK;
+			v |= SYSC_ENAWAKEUP_MASK;
+			v |= (SYSC_IDLEMODE_SMART <<
+			      __ffs(SYSC_SIDLEMODE_MASK));
+			v |= (SYSC_CLOCKACTIVITY_FCLK <<
+			      __ffs(SYSC_CLOCKACTIVITY_MASK));
+
+			omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v);
+			/*
+			 * Enabling all wakup sources to stop I2C freezing on
+			 * WFI instruction.
+			 * REVISIT: Some wkup sources might not be needed.
+			 */
+			omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+							OMAP_I2C_WE_ALL);
+
+		}
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
@@ -249,27 +334,65 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			psc = fclk_rate / 12000000;
 	}
 
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+
+		/* HSI2C controller internal clk rate should be 19.2 Mhz */
+		internal_clk = 19200;
+		fclk_rate = clk_get_rate(dev->fclk) / 1000;
+
+		/* Compute prescaler divisor */
+		psc = fclk_rate / internal_clk;
+		psc = psc - 1;
+
+		/* If configured for High Speed */
+		if (dev->speed > 400) {
+			/* For first phase of HS mode */
+			fsscll = internal_clk / (400 * 2) - 6;
+			fssclh = internal_clk / (400 * 2) - 6;
+
+			/* For second phase of HS mode */
+			hsscll = fclk_rate / (dev->speed * 2) - 6;
+			hssclh = fclk_rate / (dev->speed * 2) - 6;
+		} else {
+			/* To handle F/S modes */
+			fsscll = internal_clk / (dev->speed * 2) - 6;
+			fssclh = internal_clk / (dev->speed * 2) - 6;
+		}
+		scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
+		sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
+	} else {
+		/* Program desired operating rate */
+		fclk_rate /= (psc + 1) * 1000;
+		if (psc > 2)
+			psc = 2;
+		scll = fclk_rate / (dev->speed * 2) - 7 + psc;
+		sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
+	}
+
 	/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
 	omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
 
-	/* Program desired operating rate */
-	fclk_rate /= (psc + 1) * 1000;
-	if (psc > 2)
-		psc = 2;
+	/* SCL low and high time values */
+	omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
+	omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
 
-	omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG,
-			   fclk_rate / (clock * 2) - 7 + psc);
-	omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG,
-			   fclk_rate / (clock * 2) - 7 + psc);
+	if (dev->fifo_size)
+		/* Note: setup required fifo size - 1 */
+		omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
+					(dev->fifo_size - 1) << 8 | /* RTRSH */
+					OMAP_I2C_BUF_RXFIF_CLR |
+					(dev->fifo_size - 1) | /* XTRSH */
+					OMAP_I2C_BUF_TXFIF_CLR);
 
 	/* Take the I2C module out of reset: */
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 
 	/* Enable interrupts */
 	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
-			   (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
-			    OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
-			    OMAP_I2C_IE_AL));
+			(OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
+			OMAP_I2C_IE_AL)  | ((dev->fifo_size) ?
+				(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
 	return 0;
 }
 
@@ -316,20 +439,59 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 
 	omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 
+	/* Clear the FIFO Buffers */
+	w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG);
+	w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
+	omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
+
 	init_completion(&dev->cmd_complete);
 	dev->cmd_err = 0;
 
 	w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
+
+	/* High speed configuration */
+	if (dev->speed > 400)
+		w |= OMAP_I2C_CON_OPMODE_HS;
+
 	if (msg->flags & I2C_M_TEN)
 		w |= OMAP_I2C_CON_XA;
 	if (!(msg->flags & I2C_M_RD))
 		w |= OMAP_I2C_CON_TRX;
-	if (stop)
+
+	if (!dev->b_hw && stop)
 		w |= OMAP_I2C_CON_STP;
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 
-	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
-						      OMAP_I2C_TIMEOUT);
+	/*
+	 * Don't write stt and stp together on some hardware.
+	 */
+	if (dev->b_hw && stop) {
+		unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
+		u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
+		while (con & OMAP_I2C_CON_STT) {
+			con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
+
+			/* Let the user know if i2c is in a bad state */
+			if (time_after(jiffies, delay)) {
+				dev_err(dev->dev, "controller timed out "
+				"waiting for start condition to finish\n");
+				return -ETIMEDOUT;
+			}
+			cpu_relax();
+		}
+
+		w |= OMAP_I2C_CON_STP;
+		w &= ~OMAP_I2C_CON_STT;
+		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
+	}
+
+	/*
+	 * REVISIT: We should abort the transfer on signals, but the bus goes
+	 * into arbitration and we're currently unable to recover from it.
+	 */
+	r = wait_for_completion_timeout(&dev->cmd_complete,
+					OMAP_I2C_TIMEOUT);
 	dev->buf_len = 0;
 	if (r < 0)
 		return r;
@@ -376,7 +538,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	omap_i2c_unidle(dev);
 
-	if ((r = omap_i2c_wait_for_bb(dev)) < 0)
+	r = omap_i2c_wait_for_bb(dev);
+	if (r < 0)
 		goto out;
 
 	for (i = 0; i < num; i++) {
@@ -411,6 +574,9 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 	omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 }
 
+/* rev1 devices are apparently only on some 15xx */
+#ifdef CONFIG_ARCH_OMAP15XX
+
 static irqreturn_t
 omap_i2c_rev1_isr(int this_irq, void *dev_id)
 {
@@ -465,6 +631,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
 
 	return IRQ_HANDLED;
 }
+#else
+#define omap_i2c_rev1_isr		NULL
+#endif
 
 static irqreturn_t
 omap_i2c_isr(int this_irq, void *dev_id)
@@ -472,7 +641,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
 	struct omap_i2c_dev *dev = dev_id;
 	u16 bits;
 	u16 stat, w;
-	int count = 0;
+	int err, count = 0;
 
 	if (dev->idle)
 		return IRQ_NONE;
@@ -487,39 +656,96 @@ omap_i2c_isr(int this_irq, void *dev_id)
 
 		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 
-		if (stat & OMAP_I2C_STAT_ARDY) {
-			omap_i2c_complete_cmd(dev, 0);
-			continue;
+		err = 0;
+		if (stat & OMAP_I2C_STAT_NACK) {
+			err |= OMAP_I2C_STAT_NACK;
+			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
+					   OMAP_I2C_CON_STP);
 		}
-		if (stat & OMAP_I2C_STAT_RRDY) {
-			w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
-			if (dev->buf_len) {
-				*dev->buf++ = w;
-				dev->buf_len--;
+		if (stat & OMAP_I2C_STAT_AL) {
+			dev_err(dev->dev, "Arbitration lost\n");
+			err |= OMAP_I2C_STAT_AL;
+		}
+		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
+					OMAP_I2C_STAT_AL))
+			omap_i2c_complete_cmd(dev, err);
+		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
+			u8 num_bytes = 1;
+			if (dev->fifo_size) {
+				if (stat & OMAP_I2C_STAT_RRDY)
+					num_bytes = dev->fifo_size;
+				else
+					num_bytes = omap_i2c_read_reg(dev,
+							OMAP_I2C_BUFSTAT_REG);
+			}
+			while (num_bytes) {
+				num_bytes--;
+				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 				if (dev->buf_len) {
-					*dev->buf++ = w >> 8;
+					*dev->buf++ = w;
 					dev->buf_len--;
+					/* Data reg from 2430 is 8 bit wide */
+					if (!cpu_is_omap2430() &&
+							!cpu_is_omap34xx()) {
+						if (dev->buf_len) {
+							*dev->buf++ = w >> 8;
+							dev->buf_len--;
+						}
+					}
+				} else {
+					if (stat & OMAP_I2C_STAT_RRDY)
+						dev_err(dev->dev,
+							"RRDY IRQ while no data"
+								" requested\n");
+					if (stat & OMAP_I2C_STAT_RDR)
+						dev_err(dev->dev,
+							"RDR IRQ while no data"
+								" requested\n");
+					break;
 				}
-			} else
-				dev_err(dev->dev, "RRDY IRQ while no data "
-						"requested\n");
-			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY);
+			}
+			omap_i2c_ack_stat(dev,
+				stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
 			continue;
 		}
-		if (stat & OMAP_I2C_STAT_XRDY) {
-			w = 0;
-			if (dev->buf_len) {
-				w = *dev->buf++;
-				dev->buf_len--;
+		if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
+			u8 num_bytes = 1;
+			if (dev->fifo_size) {
+				if (stat & OMAP_I2C_STAT_XRDY)
+					num_bytes = dev->fifo_size;
+				else
+					num_bytes = omap_i2c_read_reg(dev,
+							OMAP_I2C_BUFSTAT_REG);
+			}
+			while (num_bytes) {
+				num_bytes--;
+				w = 0;
 				if (dev->buf_len) {
-					w |= *dev->buf++ << 8;
+					w = *dev->buf++;
 					dev->buf_len--;
+					/* Data reg from  2430 is 8 bit wide */
+					if (!cpu_is_omap2430() &&
+							!cpu_is_omap34xx()) {
+						if (dev->buf_len) {
+							w |= *dev->buf++ << 8;
+							dev->buf_len--;
+						}
+					}
+				} else {
+					if (stat & OMAP_I2C_STAT_XRDY)
+						dev_err(dev->dev,
+							"XRDY IRQ while no "
+							"data to send\n");
+					if (stat & OMAP_I2C_STAT_XDR)
+						dev_err(dev->dev,
+							"XDR IRQ while no "
+							"data to send\n");
+					break;
 				}
-			} else
-				dev_err(dev->dev, "XRDY IRQ while no "
-					"data to send\n");
-			omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
-			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
+				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
+			}
+			omap_i2c_ack_stat(dev,
+				stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 			continue;
 		}
 		if (stat & OMAP_I2C_STAT_ROVR) {
@@ -527,18 +753,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			dev->cmd_err |= OMAP_I2C_STAT_ROVR;
 		}
 		if (stat & OMAP_I2C_STAT_XUDF) {
-			dev_err(dev->dev, "Transmit overflow\n");
+			dev_err(dev->dev, "Transmit underflow\n");
 			dev->cmd_err |= OMAP_I2C_STAT_XUDF;
 		}
-		if (stat & OMAP_I2C_STAT_NACK) {
-			omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
-			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
-					   OMAP_I2C_CON_STP);
-		}
-		if (stat & OMAP_I2C_STAT_AL) {
-			dev_err(dev->dev, "Arbitration lost\n");
-			omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
-		}
 	}
 
 	return count ? IRQ_HANDLED : IRQ_NONE;
@@ -549,13 +766,15 @@ static const struct i2c_algorithm omap_i2c_algo = {
 	.functionality	= omap_i2c_func,
 };
 
-static int
+static int __init
 omap_i2c_probe(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev;
 	struct i2c_adapter	*adap;
 	struct resource		*mem, *irq, *ioarea;
+	irq_handler_t isr;
 	int r;
+	u32 speed = 0;
 
 	/* NOTE: driver uses the static register mapping */
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -576,17 +795,19 @@ omap_i2c_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	if (clock > 200)
-		clock = 400;	/* Fast mode */
-	else
-		clock = 100;	/* Standard mode */
-
 	dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
 	if (!dev) {
 		r = -ENOMEM;
 		goto err_release_region;
 	}
 
+	if (pdev->dev.platform_data != NULL)
+		speed = *(u32 *)pdev->dev.platform_data;
+	else
+		speed = 100;	/* Defualt speed */
+
+	dev->speed = speed;
+	dev->idle = 1;
 	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
 	dev->base = ioremap(mem->start, mem->end - mem->start + 1);
@@ -602,22 +823,39 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	omap_i2c_unidle(dev);
 
-	if (cpu_is_omap15xx())
-		dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
+	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		u16 s;
+
+		/* Set up the fifo size - Get total size */
+		s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
+		dev->fifo_size = 0x8 << s;
+
+		/*
+		 * Set up notification threshold as half the total available
+		 * size. This is to ensure that we can handle the status on int
+		 * call back latencies.
+		 */
+		dev->fifo_size = (dev->fifo_size / 2);
+		dev->b_hw = 1; /* Enable hardware fixes */
+	}
 
 	/* reset ASAP, clearing any IRQs */
 	omap_i2c_init(dev);
 
-	r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
-			0, pdev->name, dev);
+	isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
+	r = request_irq(dev->irq, isr, 0, pdev->name, dev);
 
 	if (r) {
 		dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
 		goto err_unuse_clocks;
 	}
-	r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
+
 	dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
-		 pdev->id, r >> 4, r & 0xf, clock);
+		 pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+
+	omap_i2c_idle(dev);
 
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
@@ -635,8 +873,6 @@ omap_i2c_probe(struct platform_device *pdev)
 		goto err_free_irq;
 	}
 
-	omap_i2c_idle(dev);
-
 	return 0;
 
 err_free_irq:
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index c39079f9c73..f69f91ffb46 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,11 +35,9 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <mach/regs-gpio.h>
 #include <plat/regs-iic.h>
 #include <plat/iic.h>
 
@@ -64,6 +62,7 @@ struct s3c24xx_i2c {
 	unsigned int		msg_ptr;
 
 	unsigned int		tx_setup;
+	unsigned int		irq;
 
 	enum s3c24xx_i2c_state	state;
 	unsigned long		clkrate;
@@ -71,7 +70,6 @@ struct s3c24xx_i2c {
 	void __iomem		*regs;
 	struct clk		*clk;
 	struct device		*dev;
-	struct resource		*irq;
 	struct resource		*ioarea;
 	struct i2c_adapter	adap;
 
@@ -80,16 +78,7 @@ struct s3c24xx_i2c {
 #endif
 };
 
-/* default platform data to use if not supplied in the platform_device
-*/
-
-static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.bus_freq	= 100*1000,
-	.max_freq	= 400*1000,
-	.sda_delay	= S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
-};
+/* default platform data removed, dev should always carry data. */
 
 /* s3c24xx_i2c_is2440()
  *
@@ -103,21 +92,6 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
 	return !strcmp(pdev->name, "s3c2440-i2c");
 }
 
-
-/* s3c24xx_i2c_get_platformdata
- *
- * get the platform data associated with the given device, or return
- * the default if there is none
-*/
-
-static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev)
-{
-	if (dev->platform_data != NULL)
-		return (struct s3c2410_platform_i2c *)dev->platform_data;
-
-	return &s3c24xx_i2c_default_platform;
-}
-
 /* s3c24xx_i2c_master_complete
  *
  * complete the message and wake up the caller, using the given return code,
@@ -130,7 +104,7 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
 
 	i2c->msg_ptr = 0;
 	i2c->msg = NULL;
-	i2c->msg_idx ++;
+	i2c->msg_idx++;
 	i2c->msg_num = 0;
 	if (ret)
 		i2c->msg_idx = ret;
@@ -141,19 +115,17 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
 static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
 {
 	unsigned long tmp;
-	
+
 	tmp = readl(i2c->regs + S3C2410_IICCON);
 	writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
-
 }
 
 static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
 {
 	unsigned long tmp;
-	
+
 	tmp = readl(i2c->regs + S3C2410_IICCON);
 	writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
-
 }
 
 /* irq enable/disable functions */
@@ -161,7 +133,7 @@ static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
 static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
 {
 	unsigned long tmp;
-	
+
 	tmp = readl(i2c->regs + S3C2410_IICCON);
 	writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 }
@@ -169,7 +141,7 @@ static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
 static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
 {
 	unsigned long tmp;
-	
+
 	tmp = readl(i2c->regs + S3C2410_IICCON);
 	writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 }
@@ -177,10 +149,10 @@ static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
 
 /* s3c24xx_i2c_message_start
  *
- * put the start of a message onto the bus 
+ * put the start of a message onto the bus
 */
 
-static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, 
+static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 				      struct i2c_msg *msg)
 {
 	unsigned int addr = (msg->addr & 0x7f) << 1;
@@ -199,15 +171,15 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 	if (msg->flags & I2C_M_REV_DIR_ADDR)
 		addr ^= 1;
 
-	// todo - check for wether ack wanted or not
+	/* todo - check for wether ack wanted or not */
 	s3c24xx_i2c_enable_ack(i2c);
 
 	iiccon = readl(i2c->regs + S3C2410_IICCON);
 	writel(stat, i2c->regs + S3C2410_IICSTAT);
-	
+
 	dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
 	writeb(addr, i2c->regs + S3C2410_IICDS);
-	
+
 	/* delay here to ensure the data byte has gotten onto the bus
 	 * before the transaction is started */
 
@@ -215,8 +187,8 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 
 	dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
 	writel(iiccon, i2c->regs + S3C2410_IICCON);
-	
-	stat |=  S3C2410_IICSTAT_START;
+
+	stat |= S3C2410_IICSTAT_START;
 	writel(stat, i2c->regs + S3C2410_IICSTAT);
 }
 
@@ -227,11 +199,11 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
 	dev_dbg(i2c->dev, "STOP\n");
 
 	/* stop the transfer */
-	iicstat &= ~ S3C2410_IICSTAT_START;
+	iicstat &= ~S3C2410_IICSTAT_START;
 	writel(iicstat, i2c->regs + S3C2410_IICSTAT);
-	
+
 	i2c->state = STATE_STOP;
-	
+
 	s3c24xx_i2c_master_complete(i2c, ret);
 	s3c24xx_i2c_disable_irq(i2c);
 }
@@ -241,7 +213,7 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
 
 /* is_lastmsg()
  *
- * returns TRUE if the current message is the last in the set 
+ * returns TRUE if the current message is the last in the set
 */
 
 static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
@@ -289,14 +261,14 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 
 	case STATE_STOP:
 		dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
-		s3c24xx_i2c_disable_irq(i2c);		
+		s3c24xx_i2c_disable_irq(i2c);
 		goto out_ack;
 
 	case STATE_START:
 		/* last thing we did was send a start condition on the
 		 * bus, or started a new i2c message
 		 */
-		
+
 		if (iicstat & S3C2410_IICSTAT_LASTBIT &&
 		    !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 			/* ack was not received... */
@@ -322,7 +294,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 		if (i2c->state == STATE_READ)
 			goto prepare_read;
 
-		/* fall through to the write state, as we will need to 
+		/* fall through to the write state, as we will need to
 		 * send a byte as well */
 
 	case STATE_WRITE:
@@ -339,7 +311,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 			}
 		}
 
-	retry_write:
+ retry_write:
 
 		if (!is_msgend(i2c)) {
 			byte = i2c->msg->buf[i2c->msg_ptr++];
@@ -359,9 +331,9 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 			dev_dbg(i2c->dev, "WRITE: Next Message\n");
 
 			i2c->msg_ptr = 0;
-			i2c->msg_idx ++;
+			i2c->msg_idx++;
 			i2c->msg++;
-			
+
 			/* check to see if we need to do another message */
 			if (i2c->msg->flags & I2C_M_NOSTART) {
 
@@ -375,7 +347,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 
 				goto retry_write;
 			} else {
-			
 				/* send the new start */
 				s3c24xx_i2c_message_start(i2c, i2c->msg);
 				i2c->state = STATE_START;
@@ -389,7 +360,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 		break;
 
 	case STATE_READ:
-		/* we have a byte of data in the data register, do 
+		/* we have a byte of data in the data register, do
 		 * something with it, and then work out wether we are
 		 * going to do any more read/write
 		 */
@@ -397,13 +368,13 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 		byte = readb(i2c->regs + S3C2410_IICDS);
 		i2c->msg->buf[i2c->msg_ptr++] = byte;
 
-	prepare_read:
+ prepare_read:
 		if (is_msglast(i2c)) {
 			/* last byte of buffer */
 
 			if (is_lastmsg(i2c))
 				s3c24xx_i2c_disable_ack(i2c);
-			
+
 		} else if (is_msgend(i2c)) {
 			/* ok, we've read the entire buffer, see if there
 			 * is anything else we need to do */
@@ -429,7 +400,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 	/* acknowlegde the IRQ and get back on with the work */
 
  out_ack:
-	tmp = readl(i2c->regs + S3C2410_IICCON);	
+	tmp = readl(i2c->regs + S3C2410_IICCON);
 	tmp &= ~S3C2410_IICCON_IRQPEND;
 	writel(tmp, i2c->regs + S3C2410_IICCON);
  out:
@@ -450,19 +421,19 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
 	status = readl(i2c->regs + S3C2410_IICSTAT);
 
 	if (status & S3C2410_IICSTAT_ARBITR) {
-		// deal with arbitration loss
+		/* deal with arbitration loss */
 		dev_err(i2c->dev, "deal with arbitration loss\n");
 	}
 
 	if (i2c->state == STATE_IDLE) {
 		dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
 
-		tmp = readl(i2c->regs + S3C2410_IICCON);	
+		tmp = readl(i2c->regs + S3C2410_IICCON);
 		tmp &= ~S3C2410_IICCON_IRQPEND;
 		writel(tmp, i2c->regs +  S3C2410_IICCON);
 		goto out;
 	}
-	
+
 	/* pretty much this leaves us with the fact that we've
 	 * transmitted or received whatever byte we last sent */
 
@@ -485,16 +456,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 
 	while (timeout-- > 0) {
 		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
-		
+
 		if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
 			return 0;
 
 		msleep(1);
 	}
 
-	dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n",
-		__raw_readl(S3C2410_GPEDAT));
-
 	return -ETIMEDOUT;
 }
 
@@ -503,7 +471,8 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
  * this starts an i2c transfer
 */
 
-static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num)
+static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
+			      struct i2c_msg *msgs, int num)
 {
 	unsigned long timeout;
 	int ret;
@@ -529,12 +498,12 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
 	s3c24xx_i2c_enable_irq(i2c);
 	s3c24xx_i2c_message_start(i2c, msgs);
 	spin_unlock_irq(&i2c->lock);
-	
+
 	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 
 	ret = i2c->msg_idx;
 
-	/* having these next two as dev_err() makes life very 
+	/* having these next two as dev_err() makes life very
 	 * noisy when doing an i2cdetect */
 
 	if (timeout == 0)
@@ -591,19 +560,6 @@ static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
 	.functionality		= s3c24xx_i2c_func,
 };
 
-static struct s3c24xx_i2c s3c24xx_i2c = {
-	.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock),
-	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
-	.tx_setup	= 50,
-	.adap		= {
-		.name			= "s3c2410-i2c",
-		.owner			= THIS_MODULE,
-		.algo			= &s3c24xx_i2c_algorithm,
-		.retries		= 2,
-		.class			= I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	},
-};
-
 /* s3c24xx_i2c_calcdivisor
  *
  * return the divisor settings for a given frequency
@@ -643,7 +599,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
 {
 	int diff = freq - wanted;
 
-	return (diff >= -2 && diff <= 2);
+	return diff >= -2 && diff <= 2;
 }
 
 /* s3c24xx_i2c_clockrate
@@ -655,7 +611,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
 
 static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 {
-	struct s3c2410_platform_i2c *pdata;
+	struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
 	unsigned long clkin = clk_get_rate(i2c->clk);
 	unsigned int divs, div1;
 	u32 iiccon;
@@ -663,10 +619,8 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 	int start, end;
 
 	i2c->clkrate = clkin;
-
-	pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
 	clkin /= 1000;		/* clkin now in KHz */
-     
+
 	dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
 		 pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
 
@@ -774,7 +728,7 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 
 /* s3c24xx_i2c_init
  *
- * initialise the controller, set the IO lines and frequency 
+ * initialise the controller, set the IO lines and frequency
 */
 
 static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
@@ -785,15 +739,15 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 	/* get the plafrom data */
 
-	pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
+	pdata = i2c->dev->platform_data;
 
 	/* inititalise the gpio */
 
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(to_platform_device(i2c->dev));
 
 	/* write slave address */
-	
+
 	writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
 
 	dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
@@ -831,12 +785,32 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 static int s3c24xx_i2c_probe(struct platform_device *pdev)
 {
-	struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
+	struct s3c24xx_i2c *i2c;
 	struct s3c2410_platform_i2c *pdata;
 	struct resource *res;
 	int ret;
 
-	pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
+	if (!i2c) {
+		dev_err(&pdev->dev, "no memory for state\n");
+		return -ENOMEM;
+	}
+
+	strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.algo    = &s3c24xx_i2c_algorithm;
+	i2c->adap.retries = 2;
+	i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	i2c->tx_setup     = 50;
+
+	spin_lock_init(&i2c->lock);
+	init_waitqueue_head(&i2c->wait);
 
 	/* find the clock and enable it */
 
@@ -878,7 +852,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_ioarea;
 	}
 
-	dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
+	dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
+		i2c->regs, i2c->ioarea, res);
 
 	/* setup info block for the i2c core */
 
@@ -892,29 +867,23 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_iomap;
 
 	/* find the IRQ for this unit (note, this relies on the init call to
-	 * ensure no current IRQs pending 
+	 * ensure no current IRQs pending
 	 */
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res == NULL) {
+	i2c->irq = ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
 		dev_err(&pdev->dev, "cannot find IRQ\n");
-		ret = -ENOENT;
 		goto err_iomap;
 	}
 
-	ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
-			  pdev->name, i2c);
+	ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
+			  dev_name(&pdev->dev), i2c);
 
 	if (ret != 0) {
-		dev_err(&pdev->dev, "cannot claim IRQ\n");
+		dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
 		goto err_iomap;
 	}
 
-	i2c->irq = res;
-		
-	dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
-		(unsigned long)res->start);
-
 	ret = s3c24xx_i2c_register_cpufreq(i2c);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
@@ -944,7 +913,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	s3c24xx_i2c_deregister_cpufreq(i2c);
 
  err_irq:
-	free_irq(i2c->irq->start, i2c);
+	free_irq(i2c->irq, i2c);
 
  err_iomap:
 	iounmap(i2c->regs);
@@ -958,6 +927,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	clk_put(i2c->clk);
 
  err_noclk:
+	kfree(i2c);
 	return ret;
 }
 
@@ -973,7 +943,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 	s3c24xx_i2c_deregister_cpufreq(i2c);
 
 	i2c_del_adapter(&i2c->adap);
-	free_irq(i2c->irq->start, i2c);
+	free_irq(i2c->irq, i2c);
 
 	clk_disable(i2c->clk);
 	clk_put(i2c->clk);
@@ -982,6 +952,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 
 	release_resource(i2c->ioarea);
 	kfree(i2c->ioarea);
+	kfree(i2c);
 
 	return 0;
 }