Merge ../linux-2.6

97 files changed, 693 insertions, 570 deletions

diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 14f6a6201da..05983a312d5 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -555,7 +555,7 @@ fore200e_pca_reset(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_pca_map(struct fore200e* fore200e)
 {
     DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
@@ -589,7 +589,7 @@ fore200e_pca_unmap(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_pca_configure(struct fore200e* fore200e)
 {
     struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
@@ -2125,7 +2125,7 @@ fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags)
 }
     
 
-static int __init
+static int __devinit
 fore200e_irq_request(struct fore200e* fore200e)
 {
     if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) {
@@ -2148,7 +2148,7 @@ fore200e_irq_request(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_get_esi(struct fore200e* fore200e)
 {
     struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
@@ -2180,7 +2180,7 @@ fore200e_get_esi(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_alloc_rx_buf(struct fore200e* fore200e)
 {
     int scheme, magn, nbr, size, i;
@@ -2245,7 +2245,7 @@ fore200e_alloc_rx_buf(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_bs_queue(struct fore200e* fore200e)
 {
     int scheme, magn, i;
@@ -2308,7 +2308,7 @@ fore200e_init_bs_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_rx_queue(struct fore200e* fore200e)
 {
     struct host_rxq*     rxq =  &fore200e->host_rxq;
@@ -2368,7 +2368,7 @@ fore200e_init_rx_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_tx_queue(struct fore200e* fore200e)
 {
     struct host_txq*     txq =  &fore200e->host_txq;
@@ -2431,7 +2431,7 @@ fore200e_init_tx_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_cmd_queue(struct fore200e* fore200e)
 {
     struct host_cmdq*     cmdq =  &fore200e->host_cmdq;
@@ -2487,7 +2487,7 @@ fore200e_param_bs_queue(struct fore200e* fore200e,
 }
 
 
-static int __init
+static int __devinit
 fore200e_initialize(struct fore200e* fore200e)
 {
     struct cp_queues __iomem * cpq;
@@ -2539,7 +2539,7 @@ fore200e_initialize(struct fore200e* fore200e)
 }
 
 
-static void __init
+static void __devinit
 fore200e_monitor_putc(struct fore200e* fore200e, char c)
 {
     struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
@@ -2551,7 +2551,7 @@ fore200e_monitor_putc(struct fore200e* fore200e, char c)
 }
 
 
-static int __init
+static int __devinit
 fore200e_monitor_getc(struct fore200e* fore200e)
 {
     struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
@@ -2576,7 +2576,7 @@ fore200e_monitor_getc(struct fore200e* fore200e)
 }
 
 
-static void __init
+static void __devinit
 fore200e_monitor_puts(struct fore200e* fore200e, char* str)
 {
     while (*str) {
@@ -2591,7 +2591,7 @@ fore200e_monitor_puts(struct fore200e* fore200e, char* str)
 }
 
 
-static int __init
+static int __devinit
 fore200e_start_fw(struct fore200e* fore200e)
 {
     int               ok;
@@ -2622,7 +2622,7 @@ fore200e_start_fw(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_load_fw(struct fore200e* fore200e)
 {
     u32* fw_data = (u32*) fore200e->bus->fw_data;
@@ -2648,7 +2648,7 @@ fore200e_load_fw(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_register(struct fore200e* fore200e)
 {
     struct atm_dev* atm_dev;
@@ -2675,7 +2675,7 @@ fore200e_register(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init(struct fore200e* fore200e)
 {
     if (fore200e_register(fore200e) < 0)
@@ -2721,7 +2721,7 @@ fore200e_init(struct fore200e* fore200e)
 	return -EBUSY;
 
     fore200e_supply(fore200e);
-    
+
     /* all done, board initialization is now complete */
     fore200e->state = FORE200E_STATE_COMPLETE;
     return 0;
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 6ede1f352c2..37b8cda3e8b 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -41,6 +41,7 @@
 #include <linux/timer.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/random.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include "DAC960.h"
@@ -3463,7 +3464,7 @@ static inline boolean DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
 		Command->SegmentCount, Command->DmaDirection);
 
 	 if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
-
+		add_disk_randomness(Request->rq_disk);
  	 	end_that_request_last(Request, UpToDate);
 
 		if (Command->Completion) {
diff --git a/drivers/char/hw_random.c b/drivers/char/hw_random.c
index b3bc2e37e61..29dc87e5902 100644
--- a/drivers/char/hw_random.c
+++ b/drivers/char/hw_random.c
@@ -131,7 +131,9 @@ enum {
 	rng_hw_none,
 	rng_hw_intel,
 	rng_hw_amd,
+#ifdef __i386__
 	rng_hw_via,
+#endif
 	rng_hw_geode,
 };
 
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index c92378121b4..1b05fa68899 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -675,7 +675,7 @@ static int __init mmtimer_init(void)
 	cnodeid_t node, maxn = -1;
 
 	if (!ia64_platform_is("sn2"))
-		return -1;
+		return 0;
 
 	/*
 	 * Sanity check the cycles/sec variable
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 649677b5dc3..5fdf1851543 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -13,11 +13,12 @@
   *
   * (C) 2000,2001,2002,2003,2004 Omnikey AG
   *
-  * (C) 2005 Harald Welte <laforge@gnumonks.org>
+  * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
   * 	- Adhere to Kernel CodingStyle
   * 	- Port to 2.6.13 "new" style PCMCIA
   * 	- Check for copy_{from,to}_user return values
   * 	- Use nonseekable_open()
+  * 	- add class interface for udev device creation
   *
   * All rights reserved. Licensed under dual BSD/GPL license.
   */
@@ -56,7 +57,7 @@ module_param(pc_debug, int, 0600);
 #else
 #define DEBUGP(n, rdr, x, args...)
 #endif
-static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte";
+static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
 
 #define	T_1SEC		(HZ)
 #define	T_10MSEC	msecs_to_jiffies(10)
@@ -156,6 +157,7 @@ struct cm4000_dev {
 		/*queue*/ 4*sizeof(wait_queue_head_t))
 
 static dev_link_t *dev_table[CM4000_MAX_DEV];
+static struct class *cmm_class;
 
 /* This table doesn't use spaces after the comma between fields and thus
  * violates CodingStyle.  However, I don't really think wrapping it around will
@@ -1937,6 +1939,9 @@ static int cm4000_attach(struct pcmcia_device *p_dev)
 	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 	cm4000_config(link, i);
 
+	class_device_create(cmm_class, NULL, MKDEV(major, i), NULL,
+			    "cmm%d", i);
+
 	return 0;
 }
 
@@ -1962,6 +1967,8 @@ static void cm4000_detach(struct pcmcia_device *p_dev)
 	dev_table[devno] = NULL;
  	kfree(dev);
 
+	class_device_destroy(cmm_class, MKDEV(major, devno));
+
 	return;
 }
 
@@ -1995,8 +2002,18 @@ static struct pcmcia_driver cm4000_driver = {
 
 static int __init cmm_init(void)
 {
+	int rc;
+
 	printk(KERN_INFO "%s\n", version);
-	pcmcia_register_driver(&cm4000_driver);
+
+	cmm_class = class_create(THIS_MODULE, "cardman_4000");
+	if (!cmm_class)
+		return -1;
+
+	rc = pcmcia_register_driver(&cm4000_driver);
+	if (rc < 0)
+		return rc;
+
 	major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
@@ -2012,6 +2029,7 @@ static void __exit cmm_exit(void)
 	printk(KERN_INFO MODULE_NAME ": unloading\n");
 	pcmcia_unregister_driver(&cm4000_driver);
 	unregister_chrdev(major, DEVICE_NAME);
+	class_destroy(cmm_class);
 };
 
 module_init(cmm_init);
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 46eb371bf17..466e33bab02 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -3,12 +3,13 @@
  *
  * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
  *
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
  * 	- add support for poll()
  * 	- driver cleanup
  * 	- add waitqueues
  * 	- adhere to linux kernel coding style and policies
  * 	- support 2.6.13 "new style" pcmcia interface
+ * 	- add class interface for udev device creation
  *
  * The device basically is a USB CCID compliant device that has been
  * attached to an I/O-Mapped FIFO.
@@ -53,7 +54,7 @@ module_param(pc_debug, int, 0600);
 #endif
 
 static char *version =
-"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte";
+"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
 
 #define	CCID_DRIVER_BULK_DEFAULT_TIMEOUT  	(150*HZ)
 #define	CCID_DRIVER_ASYNC_POWERUP_TIMEOUT 	(35*HZ)
@@ -67,6 +68,7 @@ static char *version =
 static void reader_release(dev_link_t *link);
 
 static int major;
+static struct class *cmx_class;
 
 #define		BS_READABLE	0x01
 #define		BS_WRITABLE	0x02
@@ -696,6 +698,9 @@ static int reader_attach(struct pcmcia_device *p_dev)
 	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 	reader_config(link, i);
 
+	class_device_create(cmx_class, NULL, MKDEV(major, i), NULL,
+			    "cmx%d", i);
+
 	return 0;
 }
 
@@ -721,6 +726,8 @@ static void reader_detach(struct pcmcia_device *p_dev)
 	dev_table[devno] = NULL;
 	kfree(dev);
 
+	class_device_destroy(cmx_class, MKDEV(major, devno));
+
 	return;
 }
 
@@ -755,8 +762,17 @@ static struct pcmcia_driver reader_driver = {
 
 static int __init cm4040_init(void)
 {
+	int rc;
+
 	printk(KERN_INFO "%s\n", version);
-	pcmcia_register_driver(&reader_driver);
+	cmx_class = class_create(THIS_MODULE, "cardman_4040");
+	if (!cmx_class)
+		return -1;
+
+	rc = pcmcia_register_driver(&reader_driver);
+	if (rc < 0)
+		return rc;
+
 	major = register_chrdev(0, DEVICE_NAME, &reader_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
@@ -771,6 +787,7 @@ static void __exit cm4040_exit(void)
 	printk(KERN_INFO MODULE_NAME ": unloading\n");
 	pcmcia_unregister_driver(&reader_driver);
 	unregister_chrdev(major, DEVICE_NAME);
+	class_destroy(cmx_class);
 }
 
 module_init(cm4040_init);
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index a85a60a93de..b046390cd25 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -306,7 +306,7 @@ struct slgt_info {
 	int tx_active;
 
 	unsigned char signals;    /* serial signal states */
-	unsigned int init_error;  /* initialization error */
+	int init_error;  /* initialization error */
 
 	unsigned char *tx_buf;
 	int tx_count;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e9bba94fc89..53d3d066554 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -303,7 +303,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 			t->commit = 0;
 			t->read = 0;
 			/* DEBUG ONLY */
-			memset(t->data, '*', size);
+/*			memset(t->data, '*', size); */
 /* 			printk("Flip recycle %p\n", t); */
 			return t;
 		}
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4c2af902090..6213bd3caee 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -445,6 +445,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
 	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
+	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
 	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 39fb88309e8..216dbbf1dc8 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -744,7 +744,7 @@ static int __video1394_ioctl(struct file *file,
 			if (i == ISO_CHANNELS) {
 			    PRINT(KERN_ERR, ohci->host->id, 
 				  "No free channel found");
-			    return EAGAIN;
+			    return -EAGAIN;
 			}
 			if (!(ohci->ISO_channel_usage & mask)) {
 			    v.channel = i;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 2d2d4ac3525..960dae5c87d 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1155,6 +1155,12 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 
 	spin_lock_irq(target->scsi_host->host_lock);
 
+	if (target->state == SRP_TARGET_DEAD ||
+	    target->state == SRP_TARGET_REMOVED) {
+		scmnd->result = DID_BAD_TARGET << 16;
+		goto out;
+	}
+
 	if (scmnd->host_scribble == (void *) -1L)
 		goto out;
 
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 8159bcecd0c..df9d6520181 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1929,6 +1929,8 @@ static struct pci_device_id hisax_pci_tbl[] __initdata = {
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B00B,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B00C,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B100,         PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B700,         PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B701,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_ABOCOM,   PCI_DEVICE_ID_ABOCOM_2BD1,      PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_ASUSTEK,  PCI_DEVICE_ID_ASUSTEK_0675,     PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_BERKOM,   PCI_DEVICE_ID_BERKOM_T_CONCEPT, PCI_ANY_ID, PCI_ANY_ID},
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 4866fc32d8d..91d25acb5ed 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -51,6 +51,8 @@ static const PCI_ENTRY id_list[] =
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, "Billion", "B00B"},
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, "Billion", "B00C"},
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, "Seyeon", "B100"},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, "Primux II S0", "B700"},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, "Primux II S0 NT", "B701"},
 	{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, "Abocom/Magitek", "2BD1"},
 	{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, "Asuscom/Askey", "675"},
 	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, "German telekom", "T-Concept"},
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index ca5b4a3b683..262c4412741 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1,7 +1,7 @@
 /*
  * hfc_usb.c
  *
- * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $
+ * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
  *
  * modular HiSax ISDN driver for Colognechip HFC-S USB chip
  *
@@ -45,7 +45,7 @@
 #include "hfc_usb.h"
 
 static const char *hfcusb_revision =
-    "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ ";
+    "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
 
 /* Hisax debug support
 * use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
@@ -219,7 +219,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num)
 	for (i = 0; list[i].name != NULL; i++)
 		if (list[i].num == num)
 			return (list[i].name);
-	return "<unkown ERROR>";
+	return "<unknown ERROR>";
 }
 
 
@@ -235,9 +235,9 @@ ctrl_start_transfer(hfcusb_data * hfc)
 		hfc->ctrl_urb->transfer_buffer = NULL;
 		hfc->ctrl_urb->transfer_buffer_length = 0;
 		hfc->ctrl_write.wIndex =
-		    hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
+		    cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg);
 		hfc->ctrl_write.wValue =
-		    hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
+		    cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val);
 
 		usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC);	/* start transfer */
 	}
@@ -1282,7 +1282,7 @@ usb_init(hfcusb_data * hfc)
 	/* init the background machinery for control requests */
 	hfc->ctrl_read.bRequestType = 0xc0;
 	hfc->ctrl_read.bRequest = 1;
-	hfc->ctrl_read.wLength = 1;
+	hfc->ctrl_read.wLength = cpu_to_le16(1);
 	hfc->ctrl_write.bRequestType = 0x40;
 	hfc->ctrl_write.bRequest = 0;
 	hfc->ctrl_write.wLength = 0;
@@ -1373,9 +1373,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	vend_idx = 0xffff;
 	for (i = 0; hfcusb_idtab[i].idVendor; i++) {
-		if (dev->descriptor.idVendor == hfcusb_idtab[i].idVendor
-		    && dev->descriptor.idProduct ==
-		    hfcusb_idtab[i].idProduct) {
+		if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor)
+		    && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) {
 			vend_idx = i;
 			continue;
 		}
@@ -1516,8 +1515,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_INT;
 							packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						case USB_ENDPOINT_XFER_BULK:
 							if (ep_addr & 0x80)
@@ -1545,8 +1543,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_BULK;
 							packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						case USB_ENDPOINT_XFER_ISOC:
 							if (ep_addr & 0x80)
@@ -1574,8 +1571,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_ISOC;
 							iso_packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						default:
 							context->
@@ -1588,10 +1584,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 						    fifonum = cidx;
 						context->fifos[cidx].hfc =
 						    context;
-						context->fifos[cidx].
-						    usb_packet_maxlen =
-						    ep->desc.
-						    wMaxPacketSize;
+						context->fifos[cidx].usb_packet_maxlen =
+						    le16_to_cpu(ep->desc.wMaxPacketSize);
 						context->fifos[cidx].
 						    intervall =
 						    ep->desc.bInterval;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 393633681f4..aeaa1db74bd 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1682,6 +1682,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #ifdef ISDN_DEBUG_MODEM_OPEN
 		printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
 #endif
+		module_put(info->owner);
 		return;
 	}
 	info->flags |= ISDN_ASYNC_CLOSING;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index bb8d5efe19b..6c0ba04bc57 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -35,6 +35,8 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 
+#include <asm/prom.h>
+
 #include "windfarm.h"
 
 #define VERSION "0.2"
@@ -465,6 +467,11 @@ static int __init windfarm_core_init(void)
 {
 	DBG("wf: core loaded\n");
 
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	platform_device_register(&wf_platform_device);
 	return 0;
 }
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 607dbaca69c..81337cd16e8 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -8,6 +8,8 @@
 #include <linux/wait.h>
 #include <linux/cpufreq.h>
 
+#include <asm/prom.h>
+
 #include "windfarm.h"
 
 #define VERSION "0.3"
@@ -74,6 +76,12 @@ static int __init wf_cpufreq_clamp_init(void)
 {
 	struct wf_control *clamp;
 
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
 	if (clamp == NULL)
 		return -ENOMEM;
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 906d3ecae6e..423bfa2432c 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -25,7 +25,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.1"
+#define VERSION "0.2"
 
 #undef DEBUG
 
@@ -113,6 +113,7 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 					     const char *loc)
 {
 	struct wf_lm75_sensor *lm;
+	int rc;
 
 	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
 	    ds1775 ? "ds1775" : "lm75", addr);
@@ -139,9 +140,11 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 	lm->i2c.driver = &wf_lm75_driver;
 	strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
 
-	if (i2c_attach_client(&lm->i2c)) {
-		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
-		       ds1775 ? "ds1775" : "lm75", lm->i2c.name);
+	rc = i2c_attach_client(&lm->i2c);
+	if (rc) {
+		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
+		       " err %d\n", ds1775 ? "ds1775" : "lm75",
+		       lm->i2c.name, rc);
 		goto fail;
 	}
 
@@ -175,16 +178,22 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 	     (dev = of_get_next_child(busnode, dev)) != NULL;) {
 		const char *loc =
 			get_property(dev, "hwsensor-location", NULL);
-		u32 *reg = (u32 *)get_property(dev, "reg", NULL);
-		DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
-		if (loc == NULL || reg == NULL)
+		u8 addr;
+
+		/* We must re-match the adapter in order to properly check
+		 * the channel on multibus setups
+		 */
+		if (!pmac_i2c_match_adapter(dev, adapter))
+			continue;
+		addr = pmac_i2c_get_dev_addr(dev);
+		if (loc == NULL || addr == 0)
 			continue;
 		/* real lm75 */
 		if (device_is_compatible(dev, "lm75"))
-			wf_lm75_create(adapter, *reg, 0, loc);
+			wf_lm75_create(adapter, addr, 0, loc);
 		/* ds1775 (compatible, better resolution */
 		else if (device_is_compatible(dev, "ds1775"))
-			wf_lm75_create(adapter, *reg, 1, loc);
+			wf_lm75_create(adapter, addr, 1, loc);
 	}
 	return 0;
 }
@@ -206,6 +215,11 @@ static int wf_lm75_detach(struct i2c_client *client)
 
 static int __init wf_lm75_sensor_init(void)
 {
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	return i2c_add_driver(&wf_lm75_driver);
 }
 
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index 5b9ad6ca7cb..8e99d408fdd 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -17,7 +17,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.1"
+#define VERSION "0.2"
 
 /* This currently only exports the external temperature sensor,
    since that's all the control loops need. */
@@ -81,7 +81,7 @@ static struct wf_sensor_ops wf_max6690_ops = {
 static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
 {
 	struct wf_6690_sensor *max;
-	char *name = "u4-temp";
+	char *name = "backside-temp";
 
 	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
 	if (max == NULL) {
@@ -118,7 +118,6 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	struct device_node *busnode, *dev = NULL;
 	struct pmac_i2c_bus *bus;
 	const char *loc;
-	u32 *reg;
 
 	bus = pmac_i2c_adapter_to_bus(adapter);
 	if (bus == NULL)
@@ -126,16 +125,23 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	busnode = pmac_i2c_get_bus_node(bus);
 
 	while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+		u8 addr;
+
+		/* We must re-match the adapter in order to properly check
+		 * the channel on multibus setups
+		 */
+		if (!pmac_i2c_match_adapter(dev, adapter))
+			continue;
 		if (!device_is_compatible(dev, "max6690"))
 			continue;
+		addr = pmac_i2c_get_dev_addr(dev);
 		loc = get_property(dev, "hwsensor-location", NULL);
-		reg = (u32 *) get_property(dev, "reg", NULL);
-		if (!loc || !reg)
+		if (loc == NULL || addr == 0)
 			continue;
-		printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+		printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
 		if (strcmp(loc, "BACKSIDE"))
 			continue;
-		wf_max6690_create(adapter, *reg);
+		wf_max6690_create(adapter, addr);
 	}
 
 	return 0;
@@ -153,6 +159,11 @@ static int wf_max6690_detach(struct i2c_client *client)
 
 static int __init wf_max6690_sensor_init(void)
 {
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	return i2c_add_driver(&wf_max6690_driver);
 }
 
diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c
index 0842432e27a..f10efb28cae 100644
--- a/drivers/macintosh/windfarm_pid.c
+++ b/drivers/macintosh/windfarm_pid.c
@@ -143,3 +143,7 @@ s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
 	return st->target;
 }
 EXPORT_SYMBOL_GPL(wf_cpu_pid_run);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
index c2a4e689c78..ef66bf2778e 100644
--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -358,6 +358,7 @@ static void backside_fan_tick(void)
 		return;
 	if (!backside_tick) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Backside control loop started.\n");
 		backside_param.min = backside_fan->ops->get_min(backside_fan);
 		backside_param.max = backside_fan->ops->get_max(backside_fan);
 		wf_pid_init(&backside_pid, &backside_param);
@@ -407,6 +408,7 @@ static void drive_bay_fan_tick(void)
 		return;
 	if (!drive_bay_tick) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Drive bay control loop started.\n");
 		drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
 		drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
 		wf_pid_init(&drive_bay_pid, &drive_bay_prm);
@@ -458,6 +460,7 @@ static void slots_fan_tick(void)
 		return;
 	if (!slots_started) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Slots control loop started.\n");
 		wf_pid_init(&slots_pid, &slots_param);
 		slots_started = 1;
 	}
@@ -504,6 +507,7 @@ static void pm112_tick(void)
 
 	if (!started) {
 		started = 1;
+		printk(KERN_INFO "windfarm: CPUs control loops started.\n");
 		for (i = 0; i < nr_cores; ++i) {
 			if (create_cpu_loop(i) < 0) {
 				failure_state = FAILURE_PERM;
@@ -594,8 +598,6 @@ static void pm112_new_sensor(struct wf_sensor *sr)
 {
 	unsigned int i;
 
-	if (have_all_sensors)
-		return;
 	if (!strncmp(sr->name, "cpu-temp-", 9)) {
 		i = sr->name[9] - '0';
 		if (sr->name[10] == 0 && i < NR_CORES &&
@@ -613,7 +615,7 @@ static void pm112_new_sensor(struct wf_sensor *sr)
 	} else if (!strcmp(sr->name, "slots-power")) {
 		if (slots_power == NULL && wf_get_sensor(sr) == 0)
 			slots_power = sr;
-	} else if (!strcmp(sr->name, "u4-temp")) {
+	} else if (!strcmp(sr->name, "backside-temp")) {
 		if (u4_temp == NULL && wf_get_sensor(sr) == 0)
 			u4_temp = sr;
 	} else
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 390cc3a99ce..9c7f122826e 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -526,7 +526,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
 	} else
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+	if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
 		ops = fc->fe->ops;
 
 		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 34c3189a1a3..356f447ee2a 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -382,7 +382,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
 EXPORT_SYMBOL(bt878_device_control);
 
 
-struct cards card_list[] __devinitdata = {
+static struct cards card_list[] __devinitdata = {
 
 	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
 	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 3a2ff1cc24b..0310e3dd07e 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -602,7 +602,7 @@ static int dst_type_print(u8 type)
 
 */
 
-struct dst_types dst_tlist[] = {
+static struct dst_types dst_tlist[] = {
 	{
 		.device_id = "200103A",
 		.offset = 0,
diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb/dvb-core/demux.h
index 9f025825b2d..0c1d87c5227 100644
--- a/drivers/media/dvb/dvb-core/demux.h
+++ b/drivers/media/dvb/dvb-core/demux.h
@@ -216,7 +216,7 @@ struct dmx_frontend {
 /*--------------------------------------------------------------------------*/
 
 /*
- * Flags OR'ed in the capabilites field of struct dmx_demux.
+ * Flags OR'ed in the capabilities field of struct dmx_demux.
  */
 
 #define DMX_TS_FILTERING                        1
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index f327fac1688..162f9795cd8 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -282,7 +282,7 @@ static struct cx22702_config cxusb_cx22702_config = {
 	.pll_set  = dvb_usb_pll_set_i2c,
 };
 
-static struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt3303_config = {
 	.demod_address = 0x0e,
 	.demod_chip    = LGDT3303,
 	.pll_set       = dvb_usb_pll_set_i2c,
@@ -357,14 +357,14 @@ static int cxusb_cx22702_frontend_attach(struct dvb_usb_device *d)
 	return -EIO;
 }
 
-static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
+static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d)
 {
 	if (usb_set_interface(d->udev,0,7) < 0)
 		err("set interface failed");
 
 	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
 
-	if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL)
+	if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL)
 		return 0;
 
 	return -EIO;
@@ -506,7 +506,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = {
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
 	.power_ctrl       = cxusb_power_ctrl,
-	.frontend_attach  = cxusb_lgdt330x_frontend_attach,
+	.frontend_attach  = cxusb_lgdt3303_frontend_attach,
 	.tuner_attach     = cxusb_lgh064f_tuner_attach,
 
 	.i2c_algo         = &cxusb_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index 716f8bf528c..ce34a55e5c2 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -47,7 +47,7 @@ static int dvb_usb_init(struct dvb_usb_device *d)
 
 	d->state = DVB_USB_STATE_INIT;
 
-/* check the capabilites and set appropriate variables */
+/* check the capabilities and set appropriate variables */
 
 /* speed - when running at FULL speed we need a HW PID filter */
 	if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 5e5d21ad93c..d4909e5c67e 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -87,7 +87,7 @@ struct dvb_usb_device;
 
 /**
  * struct dvb_usb_properties - properties of a dvb-usb-device
- * @caps: capabilites of the DVB USB device.
+ * @caps: capabilities of the DVB USB device.
  * @pid_filter_count: number of PID filter position in the optional hardware
  *  PID-filter.
  *
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 76b6a2aef32..c676b1e23ab 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -29,7 +29,7 @@ config DVB_TDA8083
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT312
-	tristate "Zarlink MT312 based"
+	tristate "Zarlink VP310/MT312 based"
 	depends on DVB_CORE
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index ec4e641acc6..d3aea83cf21 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -612,76 +612,6 @@ static void mt312_release(struct dvb_frontend* fe)
 	kfree(state);
 }
 
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt312_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
-	strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-	if (state->id != ID_VP310) {
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	state->frequency = 90;
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt312_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
-	strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-	if (state->id != ID_MT312) {
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	state->frequency = 60;
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
 static struct dvb_frontend_ops vp310_mt312_ops = {
 
 	.info = {
@@ -720,6 +650,49 @@ static struct dvb_frontend_ops vp310_mt312_ops = {
 	.set_voltage = mt312_set_voltage,
 };
 
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+					struct i2c_adapter* i2c)
+{
+	struct mt312_state* state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+	/* check if the demod is there */
+	if (mt312_readreg(state, ID, &state->id) < 0)
+		goto error;
+
+	switch (state->id) {
+	case ID_VP310:
+		strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+		state->frequency = 90;
+		break;
+	case ID_MT312:
+		strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+		state->frequency = 60;
+		break;
+	default:
+		printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
+		goto error;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
@@ -727,5 +700,4 @@ MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
 MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
index b3a53a73a11..074d844f013 100644
--- a/drivers/media/dvb/frontends/mt312.h
+++ b/drivers/media/dvb/frontends/mt312.h
@@ -38,10 +38,8 @@ struct mt312_config
 	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
 };
 
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
-					 struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+					struct i2c_adapter* i2c);
 
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
-					 struct i2c_adapter* i2c);
 
 #endif // MT312_H
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 6122ba754bc..eb15676d374 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -393,10 +393,6 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par
 		break;
 
 	case QAM_128:
-		delay = 150;
-		sweeprate = 1000;
-		break;
-
 	case QAM_256:
 		delay = 200;
 		sweeprate = 500;
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d36369e9e88..7c6ccb96b15 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -1439,7 +1439,7 @@ static int check_firmware(struct av7110* av7110)
 	len = ntohl(*(u32*) ptr);
 	ptr += 4;
 	if (len >= 512) {
-		printk("dvb-ttpci: dpram file is way to big.\n");
+		printk("dvb-ttpci: dpram file is way too big.\n");
 		return -EINVAL;
 	}
 	if (crc != crc32_le(0, ptr, len)) {
@@ -2477,7 +2477,8 @@ static int frontend_init(struct av7110 *av7110)
  * The same behaviour of missing VSYNC can be duplicated on budget
  * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
  */
-static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
+static int __devinit av7110_attach(struct saa7146_dev* dev,
+				   struct saa7146_pci_extension_data *pci_ext)
 {
 	const int length = TS_WIDTH * TS_HEIGHT;
 	struct pci_dev *pdev = dev->pci;
@@ -2827,7 +2828,7 @@ err_kfree_0:
 	goto out;
 }
 
-static int av7110_detach(struct saa7146_dev* saa)
+static int __devexit av7110_detach(struct saa7146_dev* saa)
 {
 	struct av7110 *av7110 = saa->ext_priv;
 	dprintk(4, "%p\n", av7110);
@@ -2974,7 +2975,7 @@ static struct saa7146_extension av7110_extension = {
 	.module		= THIS_MODULE,
 	.pci_tbl	= &pci_tbl[0],
 	.attach		= av7110_attach,
-	.detach		= av7110_detach,
+	.detach		= __devexit_p(av7110_detach),
 
 	.irq_mask	= MASK_19 | MASK_03 | MASK_10,
 	.irq_func	= av7110_irq,
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index b2e63e9fc05..0bb6e74ae7f 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -245,6 +245,9 @@ int av7110_bootarm(struct av7110 *av7110)
 
 	/* test DEBI */
 	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+	/* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
+	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+
 	if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
 		printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
 		       "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 617e4f6c0ed..d54bbcdde2c 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -208,7 +208,7 @@ static void ir_handler(struct av7110 *av7110, u32 ircom)
 }
 
 
-int __init av7110_ir_init(struct av7110 *av7110)
+int __devinit av7110_ir_init(struct av7110 *av7110)
 {
 	static struct proc_dir_entry *e;
 
@@ -248,7 +248,7 @@ int __init av7110_ir_init(struct av7110 *av7110)
 }
 
 
-void __exit av7110_ir_exit(struct av7110 *av7110)
+void __devexit av7110_ir_exit(struct av7110 *av7110)
 {
 	int i;
 
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 9f59541155d..85d964b5b33 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3369,7 +3369,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 	//DBG("cpia_ioctl: %u\n", ioctlnr);
 
 	switch (ioctlnr) {
-	/* query capabilites */
+	/* query capabilities */
 	case VIDIOCGCAP:
 	{
 		struct video_capability *b = arg;
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 08ffd1f325f..5588b9a5c43 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -567,7 +567,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Contrast",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
@@ -576,7 +576,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Saturation",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 048d000941c..ffd87ce5555 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1027,7 +1027,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Contrast",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
@@ -1036,7 +1036,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Saturation",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index a7a6ab9298a..7df5e0826e1 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -54,10 +54,12 @@ MODULE_PARM_DESC(debug,"enable debug messages [alsa]");
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
+static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
 
 module_param_array(index, int, NULL, 0444);
+module_param_array(enable, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
+MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s).");
 
 #define dprintk(fmt, arg...)    if (debug) \
 	printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 5a35d3b6550..6bc63a4086c 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -977,7 +977,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
 		.inputs         = {{
 			.name = name_tv,
 			.vmux = 3,
@@ -1666,7 +1666,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs         = {{
 			.name = name_tv,
@@ -2187,7 +2187,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= 0x61,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
@@ -2211,7 +2211,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= 0x61,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
@@ -2392,7 +2392,7 @@ struct saa7134_board saa7134_boards[] = {
 		}},
 	},
 	[SAA7134_BOARD_PINNACLE_PCTV_110i] = {
-		.name           = "Pinnacle PCTV 110i (saa7133)",
+	       .name           = "Pinnacle PCTV 40i/50i/110i (saa7133)",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
@@ -2407,6 +2407,10 @@ struct saa7134_board saa7134_boards[] = {
 		},{
 			  .name = name_comp1,
 			  .vmux = 1,
+			 .amux = LINE2,
+	       },{
+			 .name = name_comp2,
+			 .vmux = 0,
 			  .amux = LINE2,
 		},{
 			  .name = name_svideo,
@@ -2745,7 +2749,7 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
 		.subvendor    = 0x1048,
-		.subdevice    = 0x226b,
+		.subdevice    = 0x226a,
 		.driver_data  = SAA7134_BOARD_ELSA_500TV,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -3201,6 +3205,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+		/* this turns the remote control chip off to work around a bug in it */
+		saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
+		saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
+		break;
 	case SAA7134_BOARD_MONSTERTV_MOBILE:
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 1a536e86527..9db8e13f21c 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -110,6 +110,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe)
 	mt352_write(fe, fsm_ctl_cfg,    sizeof(fsm_ctl_cfg));
 	mt352_write(fe, scan_ctl_cfg,   sizeof(scan_ctl_cfg));
 	mt352_write(fe, irq_cfg,        sizeof(irq_cfg));
+
 	return 0;
 }
 
@@ -117,8 +118,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters* params,
 				  u8* pllbuf)
 {
-	static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
-	static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+	u8 off[] = { 0x00, 0xf1};
+	u8 on[]  = { 0x00, 0x71};
+	struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
+
 	struct saa7134_dev *dev = fe->dvb->priv;
 	struct v4l2_frequency f;
 
@@ -126,9 +129,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 	f.tuner     = 0;
 	f.type      = V4L2_TUNER_DIGITAL_TV;
 	f.frequency = params->frequency / 1000 * 16 / 1000;
-	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
 	saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
-	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+	msg.buf = on;
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
 
 	pinnacle_antenna_pwr(dev, antenna_pwr);
 
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index 7b4fb282ac8..a796a4e1917 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -580,9 +580,10 @@ int tda8290_init(struct i2c_client *c)
 
 int tda8290_probe(struct i2c_client *c)
 {
-	unsigned char soft_reset[]  = { 0x00, 0x00 };
-	unsigned char easy_mode_b[] = { 0x01, 0x02 };
-	unsigned char easy_mode_g[] = { 0x01, 0x04 };
+	unsigned char soft_reset[]   = { 0x00, 0x00 };
+	unsigned char easy_mode_b[]  = { 0x01, 0x02 };
+	unsigned char easy_mode_g[]  = { 0x01, 0x04 };
+	unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
 	unsigned char addr_dto_lsb = 0x07;
 	unsigned char data;
 
@@ -599,6 +600,7 @@ int tda8290_probe(struct i2c_client *c)
 			return 0;
 		}
 	}
+	i2c_master_send(c, restore_9886, 3);
 	return -1;
 }
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index e7ee619d62c..b6101bf446d 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -713,8 +713,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 			struct v4l2_frequency *f = arg;
 
 			switch_v4l2();
-			if (V4L2_TUNER_RADIO == f->type &&
-			    V4L2_TUNER_RADIO != t->mode) {
+			if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
+				|| (V4L2_TUNER_DIGITAL_TV == f->type
+					&& V4L2_TUNER_DIGITAL_TV != t->mode)) {
 				if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
 					    == EINVAL)
 					return 0;
diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h
index 156ae57096f..b1239ac7f37 100644
--- a/drivers/media/video/videocodec.h
+++ b/drivers/media/video/videocodec.h
@@ -56,7 +56,7 @@
    the slave is bound to it). Otherwise it doesn't need this functions and
    therfor they may not be initialized.
 
-   The other fuctions are just for convenience, as they are for shure used by
+   The other fuctions are just for convenience, as they are for sure used by
    most/all of the codecs. The last ones may be ommited, too. 
 
    See the structure declaration below for more information and which data has
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index bd0cd28543c..6699725be60 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -159,7 +159,7 @@ zr36050_wait_end (struct zr36050 *ptr)
 
 	while (!(zr36050_read_status1(ptr) & 0x4)) {
 		udelay(1);
-		if (i++ > 200000) {	// 200ms, there is for shure something wrong!!!
+		if (i++ > 200000) {	// 200ms, there is for sure something wrong!!!
 			dprintk(1,
 				"%s: timout at wait_end (last status: 0x%02x)\n",
 				ptr->name, ptr->status1);
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index 28fa31a5f15..d8dd003a7aa 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -161,7 +161,7 @@ zr36060_wait_end (struct zr36060 *ptr)
 
 	while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
 		udelay(1);
-		if (i++ > 200000) {	// 200ms, there is for shure something wrong!!!
+		if (i++ > 200000) {	// 200ms, there is for sure something wrong!!!
 			dprintk(1,
 				"%s: timout at wait_end (last status: 0x%02x)\n",
 				ptr->name, ptr->status);
diff --git a/drivers/media/video/zr36120_i2c.c b/drivers/media/video/zr36120_i2c.c
index 6bfe84d657f..21fde43a6ae 100644
--- a/drivers/media/video/zr36120_i2c.c
+++ b/drivers/media/video/zr36120_i2c.c
@@ -65,7 +65,7 @@ void attach_inform(struct i2c_bus *bus, int id)
 	 case I2C_DRIVERID_VIDEODECODER:
 		DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
 
-		/* fetch the capabilites of the decoder */
+		/* fetch the capabilities of the decoder */
 		rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
 		if (rv) {
 			DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 227c39a7c1b..8d84b045bc8 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -37,7 +37,7 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
@@ -194,7 +194,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
 
 	u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
 
-	switch (mmc_rsp_type(cmd->flags)) {
+	switch (mmc_resp_type(cmd)) {
 	case MMC_RSP_R1:
 		mmccmd |= SD_CMD_RT_1;
 		break;
@@ -740,7 +740,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
 static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
-	u32 status;
 
 	/* Avoid spurious interrupts */
 
@@ -887,7 +886,7 @@ struct mmc_host_ops au1xmmc_ops = {
 	.set_ios	= au1xmmc_set_ios,
 };
 
-static int au1xmmc_probe(struct device *dev)
+static int __devinit au1xmmc_probe(struct platform_device *pdev)
 {
 
 	int i, ret = 0;
@@ -904,7 +903,7 @@ static int au1xmmc_probe(struct device *dev)
 	disable_irq(AU1100_SD_IRQ);
 
 	for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
-		struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev);
+		struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
 		struct au1xmmc_host *host = 0;
 
 		if (!mmc) {
@@ -967,7 +966,7 @@ static int au1xmmc_probe(struct device *dev)
 	return 0;
 }
 
-static int au1xmmc_remove(struct device *dev)
+static int __devexit au1xmmc_remove(struct platform_device *pdev)
 {
 
 	int i;
@@ -997,23 +996,24 @@ static int au1xmmc_remove(struct device *dev)
 	return 0;
 }
 
-static struct device_driver au1xmmc_driver = {
-	.name          = DRIVER_NAME,
-	.bus           = &platform_bus_type,
+static struct platform_driver au1xmmc_driver = {
 	.probe         = au1xmmc_probe,
 	.remove        = au1xmmc_remove,
 	.suspend       = NULL,
-	.resume        = NULL
+	.resume        = NULL,
+	.driver        = {
+		.name  = DRIVER_NAME,
+	},
 };
 
 static int __init au1xmmc_init(void)
 {
-	return driver_register(&au1xmmc_driver);
+	return platform_driver_register(&au1xmmc_driver);
 }
 
 static void __exit au1xmmc_exit(void)
 {
-	driver_unregister(&au1xmmc_driver);
+	platform_driver_unregister(&au1xmmc_driver);
 }
 
 module_init(au1xmmc_init);
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 7b7ca5ab5ae..8815c8dbef2 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,5 +1,5 @@
 /*
- * $Id: redboot.c,v 1.18 2005/11/07 11:14:21 gleixner Exp $
+ * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $
  *
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
@@ -89,8 +89,32 @@ static int parse_redboot_partitions(struct mtd_info *master,
 			i = numslots;
 			break;
 		}
-		if (!memcmp(buf[i].name, "FIS directory", 14))
+		if (!memcmp(buf[i].name, "FIS directory", 14)) {
+			/* This is apparently the FIS directory entry for the
+			 * FIS directory itself.  The FIS directory size is
+			 * one erase block; if the buf[i].size field is
+			 * swab32(erasesize) then we know we are looking at
+			 * a byte swapped FIS directory - swap all the entries!
+			 * (NOTE: this is 'size' not 'data_length'; size is
+			 * the full size of the entry.)
+			 */
+			if (swab32(buf[i].size) == master->erasesize) {
+				int j;
+				for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+					/* The unsigned long fields were written with the
+					 * wrong byte sex, name and pad have no byte sex.
+					 */
+					swab32s(&buf[j].flash_base);
+					swab32s(&buf[j].mem_base);
+					swab32s(&buf[j].size);
+					swab32s(&buf[j].entry_point);
+					swab32s(&buf[j].data_length);
+					swab32s(&buf[j].desc_cksum);
+					swab32s(&buf[j].file_cksum);
+				}
+			}
 			break;
+		}
 	}
 	if (i == numslots) {
 		/* Didn't find it */
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index f822cd3025f..dd410496aad 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1118,13 +1118,18 @@ err_out:
 	return -ENOMEM;
 }
 
+static void cp_init_rings_index (struct cp_private *cp)
+{
+	cp->rx_tail = 0;
+	cp->tx_head = cp->tx_tail = 0;
+}
+
 static int cp_init_rings (struct cp_private *cp)
 {
 	memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
 	cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
 
-	cp->rx_tail = 0;
-	cp->tx_head = cp->tx_tail = 0;
+	cp_init_rings_index(cp);
 
 	return cp_refill_rx (cp);
 }
@@ -1886,30 +1891,30 @@ static int cp_suspend (struct pci_dev *pdev, pm_message_t state)
 
 	spin_unlock_irqrestore (&cp->lock, flags);
 
-	if (cp->pdev && cp->wol_enabled) {
-		pci_save_state (cp->pdev);
-		cp_set_d3_state (cp);
-	}
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
 	return 0;
 }
 
 static int cp_resume (struct pci_dev *pdev)
 {
-	struct net_device *dev;
-	struct cp_private *cp;
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct cp_private *cp = netdev_priv(dev);
 	unsigned long flags;
 
-	dev = pci_get_drvdata (pdev);
-	cp  = netdev_priv(dev);
+	if (!netif_running(dev))
+		return 0;
 
 	netif_device_attach (dev);
-	
-	if (cp->pdev && cp->wol_enabled) {
-		pci_set_power_state (cp->pdev, PCI_D0);
-		pci_restore_state (cp->pdev);
-	}
-	
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_wake(pdev, PCI_D0, 0);
+
+	/* FIXME: sh*t may happen if the Rx ring buffer is depleted */
+	cp_init_rings_index (cp);
 	cp_init_hw (cp);
 	netif_start_queue (dev);
 
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
index 230642571c9..e824acaf188 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/chelsio/espi.c
@@ -296,9 +296,7 @@ void t1_espi_destroy(struct peespi *espi)
 
 struct peespi *t1_espi_create(adapter_t *adapter)
 {
-	struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL);
-
-	memset(espi, 0, sizeof(*espi));
+	struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL);
 
 	if (espi)
 		espi->adapter = adapter;
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 27c77306193..99baf0e099f 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -225,9 +225,6 @@ struct e1000_rx_ring {
 	struct e1000_ps_page *ps_page;
 	struct e1000_ps_page_dma *ps_page_dma;
 
-	struct sk_buff *rx_skb_top;
-	struct sk_buff *rx_skb_prev;
-
 	/* cpu for rx queue */
 	int cpu;
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 31e332935e5..5b7d0f425af 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -103,7 +103,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "6.3.9-k2"DRIVERNAPI
+#define DRV_VERSION "6.3.9-k4"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
 
@@ -1635,8 +1635,6 @@ setup_rx_desc_die:
 
 	rxdr->next_to_clean = 0;
 	rxdr->next_to_use = 0;
-	rxdr->rx_skb_top = NULL;
-	rxdr->rx_skb_prev = NULL;
 
 	return 0;
 }
@@ -1713,8 +1711,23 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
 		rctl |= adapter->rx_buffer_len << 0x11;
 	} else {
 		rctl &= ~E1000_RCTL_SZ_4096;
-		rctl &= ~E1000_RCTL_BSEX;
-		rctl |= E1000_RCTL_SZ_2048;
+		rctl |= E1000_RCTL_BSEX; 
+		switch (adapter->rx_buffer_len) {
+		case E1000_RXBUFFER_2048:
+		default:
+			rctl |= E1000_RCTL_SZ_2048;
+			rctl &= ~E1000_RCTL_BSEX;
+			break;
+		case E1000_RXBUFFER_4096:
+			rctl |= E1000_RCTL_SZ_4096;
+			break;
+		case E1000_RXBUFFER_8192:
+			rctl |= E1000_RCTL_SZ_8192;
+			break;
+		case E1000_RXBUFFER_16384:
+			rctl |= E1000_RCTL_SZ_16384;
+			break;
+		}
 	}
 
 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
@@ -2107,16 +2120,6 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter,
 		}
 	}
 
-	/* there also may be some cached data in our adapter */
-	if (rx_ring->rx_skb_top) {
-		dev_kfree_skb(rx_ring->rx_skb_top);
-
-		/* rx_skb_prev will be wiped out by rx_skb_top */
-		rx_ring->rx_skb_top = NULL;
-		rx_ring->rx_skb_prev = NULL;
-	}
-
-
 	size = sizeof(struct e1000_buffer) * rx_ring->count;
 	memset(rx_ring->buffer_info, 0, size);
 	size = sizeof(struct e1000_ps_page) * rx_ring->count;
@@ -3106,24 +3109,27 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		break;
 	}
 
-	/* since the driver code now supports splitting a packet across
-	 * multiple descriptors, most of the fifo related limitations on
-	 * jumbo frame traffic have gone away.
-	 * simply use 2k descriptors for everything.
-	 *
-	 * NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
-	 * means we reserve 2 more, this pushes us to allocate from the next
-	 * larger slab size
-	 * i.e. RXBUFFER_2048 --> size-4096 slab */
-
-	/* recent hardware supports 1KB granularity */
+
 	if (adapter->hw.mac_type > e1000_82547_rev_2) {
-		adapter->rx_buffer_len =
-		    ((max_frame < E1000_RXBUFFER_2048) ?
-		        max_frame : E1000_RXBUFFER_2048);
+		adapter->rx_buffer_len = max_frame;
 		E1000_ROUNDUP(adapter->rx_buffer_len, 1024);
-	} else
-		adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+	} else {
+		if(unlikely((adapter->hw.mac_type < e1000_82543) &&
+		   (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
+			DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+					    "on 82542\n");
+			return -EINVAL;
+		} else {
+			if(max_frame <= E1000_RXBUFFER_2048)
+				adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+			else if(max_frame <= E1000_RXBUFFER_4096)
+				adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+			else if(max_frame <= E1000_RXBUFFER_8192)
+				adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+			else if(max_frame <= E1000_RXBUFFER_16384)
+				adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+		}
+	}
 
 	netdev->mtu = new_mtu;
 
@@ -3620,7 +3626,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	uint8_t last_byte;
 	unsigned int i;
 	int cleaned_count = 0;
-	boolean_t cleaned = FALSE, multi_descriptor = FALSE;
+	boolean_t cleaned = FALSE;
 
 	i = rx_ring->next_to_clean;
 	rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -3652,43 +3658,12 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 
 		length = le16_to_cpu(rx_desc->length);
 
-		skb_put(skb, length);
-
-		if (!(status & E1000_RXD_STAT_EOP)) {
-			if (!rx_ring->rx_skb_top) {
-				rx_ring->rx_skb_top = skb;
-				rx_ring->rx_skb_top->len = length;
-				rx_ring->rx_skb_prev = skb;
-			} else {
-				if (skb_shinfo(rx_ring->rx_skb_top)->frag_list) {
-					rx_ring->rx_skb_prev->next = skb;
-					skb->prev = rx_ring->rx_skb_prev;
-				} else {
-					skb_shinfo(rx_ring->rx_skb_top)->frag_list = skb;
-				}
-				rx_ring->rx_skb_prev = skb;
-				rx_ring->rx_skb_top->data_len += length;
-			}
+		if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+			/* All receives must fit into a single buffer */
+			E1000_DBG("%s: Receive packet consumed multiple"
+				  " buffers\n", netdev->name);
+			dev_kfree_skb_irq(skb);
 			goto next_desc;
-		} else {
-			if (rx_ring->rx_skb_top) {
-				if (skb_shinfo(rx_ring->rx_skb_top)
-							->frag_list) {
-					rx_ring->rx_skb_prev->next = skb;
-					skb->prev = rx_ring->rx_skb_prev;
-				} else
-					skb_shinfo(rx_ring->rx_skb_top)
-							->frag_list = skb;
-
-				rx_ring->rx_skb_top->data_len += length;
-				rx_ring->rx_skb_top->len +=
-					rx_ring->rx_skb_top->data_len;
-
-				skb = rx_ring->rx_skb_top;
-				multi_descriptor = TRUE;
-				rx_ring->rx_skb_top = NULL;
-				rx_ring->rx_skb_prev = NULL;
-			}
 		}
 
 		if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
@@ -3712,10 +3687,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * performance for small packets with large amounts
 		 * of reassembly being done in the stack */
 #define E1000_CB_LENGTH 256
-		if ((length < E1000_CB_LENGTH) &&
-		   !rx_ring->rx_skb_top &&
-		   /* or maybe (status & E1000_RXD_STAT_EOP) && */
-		   !multi_descriptor) {
+		if (length < E1000_CB_LENGTH) {
 			struct sk_buff *new_skb =
 			    dev_alloc_skb(length + NET_IP_ALIGN);
 			if (new_skb) {
@@ -3729,7 +3701,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 				skb = new_skb;
 				skb_put(skb, length);
 			}
-		}
+		} else
+			skb_put(skb, length);
 
 		/* end copybreak code */
 
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 01ddfc8cce3..aa558136939 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -806,6 +806,7 @@ static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
 	PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
+	PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
 	PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
 	PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
 	PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1),
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 49b597cbc19..b7f00d6eb6a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -4092,6 +4092,7 @@ static void s2io_set_multicast(struct net_device *dev)
 		     i++, mclist = mclist->next) {
 			memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
 			       ETH_ALEN);
+			mac_addr = 0;
 			for (j = 0; j < ETH_ALEN; j++) {
 				mac_addr |= mclist->dmi_addr[j];
 				mac_addr <<= 8;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ca8160d6822..72c1630977d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -96,10 +96,6 @@ static int copybreak __read_mostly = 256;
 module_param(copybreak, int, 0);
 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
 
-static int disable_msi = 0;
-module_param(disable_msi, int, 0);
-MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -3126,61 +3122,6 @@ static void __devinit sky2_show_addr(struct net_device *dev)
 		       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
 }
 
-/* Handle software interrupt used during MSI test */
-static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
-					    struct pt_regs *regs)
-{
-	struct sky2_hw *hw = dev_id;
-	u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
-
-	if (status == 0)
-		return IRQ_NONE;
-
-	if (status & Y2_IS_IRQ_SW) {
-		sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
-		hw->msi = 1;
-	}
-	sky2_write32(hw, B0_Y2_SP_ICR, 2);
-
-	sky2_read32(hw, B0_IMSK);
-	return IRQ_HANDLED;
-}
-
-/* Test interrupt path by forcing a a software IRQ */
-static int __devinit sky2_test_msi(struct sky2_hw *hw)
-{
-	struct pci_dev *pdev = hw->pdev;
-	int i, err;
-
-	sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
-
-	err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
-	if (err) {
-		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
-		       pci_name(pdev), pdev->irq);
-		return err;
-	}
-
-	sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
-	wmb();
-
-	for (i = 0; i < 10; i++) {
-		barrier();
-		if (hw->msi)
-			goto found;
-		mdelay(1);
-	}
-
-	err = -EOPNOTSUPP;
-	sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- found:
-	sky2_write32(hw, B0_IMSK, 0);
-
-	free_irq(pdev->irq, hw);
-
-	return err;
-}
-
 static int __devinit sky2_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
@@ -3302,20 +3243,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		}
 	}
 
-	if (!disable_msi && pci_enable_msi(pdev) == 0) {
-		err = sky2_test_msi(hw);
-		if (err == -EOPNOTSUPP) {
-			/* MSI test failed, go back to INTx mode */
-			printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
-			       "switching to INTx mode. Please report this failure to "
-			       "the PCI maintainer and include system chipset information.\n",
-			       pci_name(pdev));
-			pci_disable_msi(pdev);
-		}
-		else if (err)
-			goto err_out_unregister;
-	}
-
 	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
 			  DRV_NAME, hw);
 	if (err) {
@@ -3332,8 +3259,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	return 0;
 
 err_out_unregister:
-	if (hw->msi)
-		pci_disable_msi(pdev);
 	if (dev1) {
 		unregister_netdev(dev1);
 		free_netdev(dev1);
@@ -3376,8 +3301,6 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	sky2_read8(hw, B0_CTST);
 
 	free_irq(pdev->irq, hw);
-	if (hw->msi)
-		pci_disable_msi(pdev);
 	pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 3edb98075e0..dce955c76f3 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1881,7 +1881,6 @@ struct sky2_hw {
 	u32		     intr_mask;
 
 	int		     pm_cap;
-	int		     msi;
 	u8	     	     chip_id;
 	u8		     chip_rev;
 	u8		     copper;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e8e92c853e8..15545620ab0 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3532,9 +3532,23 @@ static inline int tg3_4g_overflow_test(dma_addr_t mapping, int len)
 		(base + len + 8 < base));
 }
 
+/* Test for DMA addresses > 40-bit */
+static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
+					  int len)
+{
+#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
+	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+		return (((u64) mapping + len) > DMA_40BIT_MASK);
+	return 0;
+#else
+	return 0;
+#endif
+}
+
 static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32);
 
-static int tigon3_4gb_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
+/* Workaround 4GB and 40-bit hardware DMA bugs. */
+static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
 				       u32 last_plus_one, u32 *start,
 				       u32 base_flags, u32 mss)
 {
@@ -3742,6 +3756,9 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			if (tg3_4g_overflow_test(mapping, len))
 				would_hit_hwbug = 1;
 
+			if (tg3_40bit_overflow_test(tp, mapping, len))
+				would_hit_hwbug = 1;
+
 			if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
 				tg3_set_txd(tp, entry, mapping, len,
 					    base_flags, (i == last)|(mss << 1));
@@ -3763,7 +3780,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* If the workaround fails due to memory/mapping
 		 * failure, silently drop this packet.
 		 */
-		if (tigon3_4gb_hwbug_workaround(tp, skb, last_plus_one,
+		if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
 						&start, base_flags, mss))
 			goto out_unlock;
 
@@ -10608,8 +10625,9 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	unsigned long tg3reg_base, tg3reg_len;
 	struct net_device *dev;
 	struct tg3 *tp;
-	int i, err, pci_using_dac, pm_cap;
+	int i, err, pm_cap;
 	char str[40];
+	u64 dma_mask, persist_dma_mask;
 
 	if (tg3_version_printed++ == 0)
 		printk(KERN_INFO "%s", version);
@@ -10646,26 +10664,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_free_res;
 	}
 
-	/* Configure DMA attributes. */
-	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
-	if (!err) {
-		pci_using_dac = 1;
-		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
-		if (err < 0) {
-			printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
-			       "for consistent allocations\n");
-			goto err_out_free_res;
-		}
-	} else {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-		if (err) {
-			printk(KERN_ERR PFX "No usable DMA configuration, "
-			       "aborting.\n");
-			goto err_out_free_res;
-		}
-		pci_using_dac = 0;
-	}
-
 	tg3reg_base = pci_resource_start(pdev, 0);
 	tg3reg_len = pci_resource_len(pdev, 0);
 
@@ -10679,8 +10677,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	SET_MODULE_OWNER(dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
-	if (pci_using_dac)
-		dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_LLTX;
 #if TG3_VLAN_TAG_USED
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
@@ -10765,6 +10761,44 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
+	/* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+	 * On 64-bit systems with IOMMU, use 40-bit dma_mask.
+	 * On 64-bit systems without IOMMU, use 64-bit dma_mask and
+	 * do DMA address check in tg3_start_xmit().
+	 */
+	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+		persist_dma_mask = dma_mask = DMA_40BIT_MASK;
+#ifdef CONFIG_HIGHMEM
+		dma_mask = DMA_64BIT_MASK;
+#endif
+	} else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+		persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+	else
+		persist_dma_mask = dma_mask = DMA_64BIT_MASK;
+
+	/* Configure DMA attributes. */
+	if (dma_mask > DMA_32BIT_MASK) {
+		err = pci_set_dma_mask(pdev, dma_mask);
+		if (!err) {
+			dev->features |= NETIF_F_HIGHDMA;
+			err = pci_set_consistent_dma_mask(pdev,
+							  persist_dma_mask);
+			if (err < 0) {
+				printk(KERN_ERR PFX "Unable to obtain 64 bit "
+				       "DMA for consistent allocations\n");
+				goto err_out_iounmap;
+			}
+		}
+	}
+	if (err || dma_mask == DMA_32BIT_MASK) {
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (err) {
+			printk(KERN_ERR PFX "No usable DMA configuration, "
+			       "aborting.\n");
+			goto err_out_iounmap;
+		}
+	}
+
 	tg3_init_bufmgr_config(tp);
 
 #if TG3_TSO_SUPPORT != 0
@@ -10833,9 +10867,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	} else
 		tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
 
-	if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
-		dev->features &= ~NETIF_F_HIGHDMA;
-
 	/* flow control autonegotiation is default behavior */
 	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c2d5907dc8e..ed1f837c8fd 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1106,6 +1106,9 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 
 	for (i = 0; i < vptr->options.numrx; i++) {
 		struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
+		struct rx_desc *rd = vptr->rd_ring + i;
+
+		memset(rd, 0, sizeof(*rd));
 
 		if (!rd_info->skb)
 			continue;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 8bc0b528548..f8f4503475f 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -877,7 +877,6 @@ static struct pcmcia_device_id hostap_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
 	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
 	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
@@ -891,6 +890,10 @@ static struct pcmcia_device_id hostap_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+	PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
+					 0x74c5e40d),
+	PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
+					 0x4b801a17),
 	PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
 				    0x7a954bd9, 0x74be00c6),
 	PCMCIA_DEVICE_PROD_ID1234(
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 166de350778..10845253c9e 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -312,8 +312,7 @@ static int __devinit parport_register (struct pci_dev *dev,
 {
 	struct parport_pc_pci *card;
 	struct parport_serial_private *priv = pci_get_drvdata (dev);
-	int i = id->driver_data, n;
-	int success = 0;
+	int n, success = 0;
 
 	priv->par = cards[id->driver_data];
 	card = &priv->par;
@@ -344,10 +343,8 @@ static int __devinit parport_register (struct pci_dev *dev,
                                         "hi" as an offset (see SYBA
                                         def.) */
 		/* TODO: test if sharing interrupts works */
-		printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
-			"I/O at %#lx(%#lx)\n",
-			parport_serial_pci_tbl[i].vendor,
-			parport_serial_pci_tbl[i].device, io_lo, io_hi);
+		dev_dbg(&dev->dev, "PCI parallel port detected: I/O at "
+			"%#lx(%#lx)\n", io_lo, io_hi);
 		port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
 					      PARPORT_DMA_NONE, dev);
 		if (port) {
@@ -359,7 +356,7 @@ static int __devinit parport_register (struct pci_dev *dev,
 	if (card->postinit_hook)
 		card->postinit_hook (dev, card, !success);
 
-	return success ? 0 : 1;
+	return 0;
 }
 
 static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 0a424a4e818..54ad93daca3 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -352,11 +352,20 @@ static void pcmcia_release_dev(struct device *dev)
 	kfree(p_dev);
 }
 
+static void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
+{
+	if (!s->pcmcia_state.device_add_pending) {
+		s->pcmcia_state.device_add_pending = 1;
+		schedule_work(&s->device_add);
+	}
+	return;
+}
 
 static int pcmcia_device_probe(struct device * dev)
 {
 	struct pcmcia_device *p_dev;
 	struct pcmcia_driver *p_drv;
+	struct pcmcia_device_id *did;
 	struct pcmcia_socket *s;
 	int ret = 0;
 
@@ -392,6 +401,19 @@ static int pcmcia_device_probe(struct device * dev)
 	}
 
 	ret = p_drv->probe(p_dev);
+	if (ret)
+		goto put_module;
+
+	/* handle pseudo multifunction devices:
+	 * there are at most two pseudo multifunction devices.
+	 * if we're matching against the first, schedule a
+	 * call which will then check whether there are two
+	 * pseudo devices, and if not, add the second one.
+	 */
+	did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+	if ((did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
+	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
+		pcmcia_add_pseudo_device(p_dev->socket);
 
  put_module:
 	if (ret)
@@ -660,15 +682,6 @@ static void pcmcia_delayed_add_pseudo_device(void *data)
 	s->pcmcia_state.device_add_pending = 0;
 }
 
-static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
-{
-	if (!s->pcmcia_state.device_add_pending) {
-		s->pcmcia_state.device_add_pending = 1;
-		schedule_work(&s->device_add);
-	}
-	return;
-}
-
 static int pcmcia_requery(struct device *dev, void * _data)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
@@ -755,15 +768,6 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev,
 	}
 
 	if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
-		/* handle pseudo multifunction devices:
-		 * there are at most two pseudo multifunction devices.
-		 * if we're matching against the first, schedule a
-		 * call which will then check whether there are two
-		 * pseudo devices, and if not, add the second one.
-		 */
-		if (dev->device_no == 0)
-			pcmcia_add_pseudo_device(dev->socket);
-
 		if (dev->device_no != did->device_no)
 			return 0;
 	}
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index aaa568a3806..b68eef25161 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -303,13 +303,11 @@ found:
 	down_write(&dev->dev.bus->subsys.rwsem);
 	dev->card_link = clink;
 	dev->dev.driver = &drv->link.driver;
-	if (drv->link.driver.probe) {
-		if (drv->link.driver.probe(&dev->dev)) {
-			dev->dev.driver = NULL;
-			dev->card_link = NULL;
-			up_write(&dev->dev.bus->subsys.rwsem);
-			return NULL;
-		}
+	if (pnp_bus_type.probe(&dev->dev)) {
+		dev->dev.driver = NULL;
+		dev->card_link = NULL;
+		up_write(&dev->dev.bus->subsys.rwsem);
+		return NULL;
 	}
 	device_bind_driver(&dev->dev);
 	up_write(&dev->dev.bus->subsys.rwsem);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index af1d5b404ce..33157c84d1d 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -215,9 +215,10 @@ dasd_state_basic_to_known(struct dasd_device * device)
  * interrupt for this detection ccw uses the kernel event daemon to
  * trigger the call to dasd_change_state. All this is done in the
  * discipline code, see dasd_eckd.c.
- * After the analysis ccw is done (do_analysis returned 0 or error)
- * the block device is setup. Either a fake disk is added to allow
- * formatting or a proper device request queue is created.
+ * After the analysis ccw is done (do_analysis returned 0) the block
+ * device is setup.
+ * In case the analysis returns an error, the device setup is stopped
+ * (a fake disk was already added to allow formatting).
  */
 static inline int
 dasd_state_basic_to_ready(struct dasd_device * device)
@@ -227,13 +228,19 @@ dasd_state_basic_to_ready(struct dasd_device * device)
 	rc = 0;
 	if (device->discipline->do_analysis != NULL)
 		rc = device->discipline->do_analysis(device);
-	if (rc)
+	if (rc) {
+		if (rc != -EAGAIN)
+			device->state = DASD_STATE_UNFMT;
 		return rc;
+	}
+	/* make disk known with correct capacity */
 	dasd_setup_queue(device);
+	set_capacity(device->gdp, device->blocks << device->s2b_shift);
 	device->state = DASD_STATE_READY;
-	if (dasd_scan_partitions(device) != 0)
+	rc = dasd_scan_partitions(device);
+	if (rc)
 		device->state = DASD_STATE_BASIC;
-	return 0;
+	return rc;
 }
 
 /*
@@ -254,6 +261,15 @@ dasd_state_ready_to_basic(struct dasd_device * device)
 }
 
 /*
+ * Back to basic.
+ */
+static inline void
+dasd_state_unfmt_to_basic(struct dasd_device * device)
+{
+	device->state = DASD_STATE_BASIC;
+}
+
+/*
  * Make the device online and schedule the bottom half to start
  * the requeueing of requests from the linux request queue to the
  * ccw queue.
@@ -319,8 +335,12 @@ dasd_decrease_state(struct dasd_device *device)
 	if (device->state == DASD_STATE_READY &&
 	    device->target <= DASD_STATE_BASIC)
 		dasd_state_ready_to_basic(device);
-	
-	if (device->state == DASD_STATE_BASIC && 
+
+	if (device->state == DASD_STATE_UNFMT &&
+	    device->target <= DASD_STATE_BASIC)
+		dasd_state_unfmt_to_basic(device);
+
+	if (device->state == DASD_STATE_BASIC &&
 	    device->target <= DASD_STATE_KNOWN)
 		dasd_state_basic_to_known(device);
 	
@@ -1722,7 +1742,7 @@ dasd_open(struct inode *inp, struct file *filp)
 		goto out;
 	}
 
-	if (device->state < DASD_STATE_BASIC) {
+	if (device->state <= DASD_STATE_BASIC) {
 		DBF_DEV_EVENT(DBF_ERR, device, " %s",
 			      " Cannot open unrecognized device");
 		rc = -ENODEV;
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 65dc844b975..fce2835e7d1 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -100,8 +100,6 @@ dasd_scan_partitions(struct dasd_device * device)
 {
 	struct block_device *bdev;
 
-	/* Make the disk known. */
-	set_capacity(device->gdp, device->blocks << device->s2b_shift);
 	bdev = bdget_disk(device->gdp, 0);
 	if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0)
 		return -ENODEV;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 0592354cc60..7cb0b9e78a6 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -26,7 +26,7 @@
  *   new: the dasd_device structure is allocated.
  *   known: the discipline for the device is identified.
  *   basic: the device can do basic i/o.
- *   accept: the device is analysed (format is known).
+ *   unfmt: the device could not be analyzed (format is unknown).
  *   ready: partition detection is done and the device is can do block io.
  *   online: the device accepts requests from the block device queue.
  *
@@ -47,8 +47,9 @@
 #define DASD_STATE_NEW	  0
 #define DASD_STATE_KNOWN  1
 #define DASD_STATE_BASIC  2
-#define DASD_STATE_READY  3
-#define DASD_STATE_ONLINE 4
+#define DASD_STATE_UNFMT  3
+#define DASD_STATE_READY  4
+#define DASD_STATE_ONLINE 5
 
 #include <linux/module.h>
 #include <linux/wait.h>
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 2d5da3c75ca..4c1acc8daa8 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -93,6 +93,9 @@ dasd_devices_show(struct seq_file *m, void *v)
 	case DASD_STATE_BASIC:
 		seq_printf(m, "basic");
 		break;
+	case DASD_STATE_UNFMT:
+		seq_printf(m, "unnformatted");
+		break;
 	case DASD_STATE_READY:
 	case DASD_STATE_ONLINE:
 		seq_printf(m, "active ");
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 8cf9905d484..f4183d66025 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -1115,6 +1115,9 @@ chsc_enable_facility(int operation_code)
 		goto out;
 	}
 	switch (sda_area->response.code) {
+	case 0x0001: /* everything ok */
+		ret = 0;
+		break;
 	case 0x0003: /* invalid request block */
 	case 0x0007:
 		ret = -EINVAL;
@@ -1123,6 +1126,8 @@ chsc_enable_facility(int operation_code)
 	case 0x0101: /* facility not provided */
 		ret = -EOPNOTSUPP;
 		break;
+	default: /* something went wrong */
+		ret = -EIO;
 	}
  out:
 	free_page((unsigned long)sda_area);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index d6469baa7e1..72118ee6895 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -168,7 +168,7 @@ smsg_init(void)
 		driver_unregister(&smsg_driver);
 		return -EIO;	/* better errno ? */
 	}
-	rc = iucv_connect (&smsg_pathid, 1, 0, "*MSG    ", 0, 0, 0, 0,
+	rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG    ", 0, 0, 0, 0,
 			   smsg_handle, 0);
 	if (rc) {
 		printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index cb2ee25f213..531a1f9ceb5 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -1260,16 +1260,15 @@ static void free_hard_reset_SCs(struct Scsi_Host *shpnt, Scsi_Cmnd **SCs)
  * Reset the bus
  *
  */
-static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
 {
-	struct Scsi_Host *shpnt = SCpnt->device->host;
 	unsigned long flags;
 
 	DO_LOCK(flags);
 
 #if defined(AHA152X_DEBUG)
 	if(HOSTDATA(shpnt)->debug & debug_eh) {
-		printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt);
+		printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
 		show_queues(shpnt);
 	}
 #endif
@@ -1277,14 +1276,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
 	free_hard_reset_SCs(shpnt, &ISSUE_SC);
 	free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
 
-	DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt));
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
 
 	SETPORT(SCSISEQ, SCSIRSTO);
 	mdelay(256);
 	SETPORT(SCSISEQ, 0);
 	mdelay(DELAY);
 
-	DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt));
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
 
 	setup_expected_interrupts(shpnt);
 	if(HOSTDATA(shpnt)->commands==0)
@@ -1295,6 +1294,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
 	return SUCCESS;
 }
 
+/*
+ * Reset the bus
+ *
+ */
+static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+{
+	return aha152x_bus_reset_host(SCpnt->device->host);
+}
 
 /*
  *  Restore default values to the AIC-6260 registers and reset the fifos
@@ -1337,23 +1344,28 @@ static void reset_ports(struct Scsi_Host *shpnt)
  * Reset the host (bus and controller)
  *
  */
-int aha152x_host_reset(Scsi_Cmnd * SCpnt)
+int aha152x_host_reset_host(struct Scsi_Host *shpnt)
 {
-#if defined(AHA152X_DEBUG)
-	struct Scsi_Host *shpnt = SCpnt->device->host;
-#endif
-
-	DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt);
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
 
-	aha152x_bus_reset(SCpnt);
+	aha152x_bus_reset_host(shpnt);
 
-	DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt));
-	reset_ports(SCpnt->device->host);
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
+	reset_ports(shpnt);
 
 	return SUCCESS;
 }
 
 /*
+ * Reset the host (bus and controller)
+ * 
+ */
+static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
+{
+	return aha152x_host_reset_host(SCpnt->device->host);
+}
+
+/*
  * Return the "logical geometry"
  *
  */
@@ -1431,22 +1443,18 @@ static void run(void)
 {
 	int i;
 	for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
-		struct Scsi_Host *shpnt = aha152x_host[i];
-		if (shpnt && HOSTDATA(shpnt)->service) {
-			HOSTDATA(shpnt)->service=0;
-			is_complete(shpnt);
-		}
+		is_complete(aha152x_host[i]);
 	}
 }
 
 /*
- *    Interrupts handler
+ * Interrupt handler
  *
  */
-
 static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
 {
 	struct Scsi_Host *shpnt = lookup_irq(irqno);
+	unsigned long flags;
 	unsigned char rev, dmacntrl0;
 
 	if (!shpnt) {
@@ -1472,23 +1480,23 @@ static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
 	if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
 		return IRQ_NONE;
 
+	if( TESTLO(DMASTAT, INTSTAT) )
+		return IRQ_NONE;	
+
 	/* no more interrupts from the controller, while we're busy.
 	   INTEN is restored by the BH handler */
 	CLRBITS(DMACNTRL0, INTEN);
 
-#if 0
-	/* check if there is already something to be
-           serviced; should not happen */
-	if(HOSTDATA(shpnt)->service) {
-		printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service);
-	        show_queues(shpnt);
+	DO_LOCK(flags);
+	if( HOSTDATA(shpnt)->service==0 ) {
+		HOSTDATA(shpnt)->service=1;
+
+		/* Poke the BH handler */
+		INIT_WORK(&aha152x_tq, (void *) run, NULL);
+		schedule_work(&aha152x_tq);
 	}
-#endif
-	
-	/* Poke the BH handler */
-	HOSTDATA(shpnt)->service++;
-	INIT_WORK(&aha152x_tq, (void *) run, NULL);
-	schedule_work(&aha152x_tq);
+	DO_UNLOCK(flags);
+
 	return IRQ_HANDLED;
 }
 
@@ -2527,7 +2535,18 @@ static void is_complete(struct Scsi_Host *shpnt)
 	unsigned long flags;
 	int pending;
 
+	if(!shpnt)
+		return;
+
 	DO_LOCK(flags);
+
+	if( HOSTDATA(shpnt)->service==0 )  {
+		DO_UNLOCK(flags);
+		return;
+	}
+
+	HOSTDATA(shpnt)->service = 0;
+
 	if(HOSTDATA(shpnt)->in_intr) {
 		DO_UNLOCK(flags);
 		/* aha152x_error never returns.. */
diff --git a/drivers/scsi/aha152x.h b/drivers/scsi/aha152x.h
index d277613af29..d2add24d02a 100644
--- a/drivers/scsi/aha152x.h
+++ b/drivers/scsi/aha152x.h
@@ -332,6 +332,6 @@ struct aha152x_setup {
 
 struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
 void aha152x_release(struct Scsi_Host *);
-int aha152x_host_reset(Scsi_Cmnd *);
+int aha152x_host_reset_host(struct Scsi_Host *);
 
 #endif /* _AHA152X_H */
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 23728d1c980..fcd304e11c2 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -65,27 +65,6 @@ static int jazz_esp_release(struct Scsi_Host *shost)
 	return 0;
 }
 
-static struct scsi_host_template driver_template = {
-	.proc_name		= "jazz_esp",
-	.proc_info		= &esp_proc_info,
-	.name			= "ESP 100/100a/200",
-	.detect			= jazz_esp_detect,
-	.slave_alloc		= esp_slave_alloc,
-	.slave_destroy		= esp_slave_destroy,
-	.release		= jazz_esp_release,
-	.info			= esp_info,
-	.queuecommand		= esp_queue,
-	.eh_abort_handler	= esp_abort,
-	.eh_bus_reset_handler	= esp_reset,
-	.can_queue		= 7,
-	.this_id		= 7,
-	.sg_tablesize		= SG_ALL,
-	.cmd_per_lun		= 1,
-	.use_clustering		= DISABLE_CLUSTERING,
-};
-
-#include "scsi_module.c"
-
 /***************************************************************** Detection */
 static int jazz_esp_detect(struct scsi_host_template *tpnt)
 {
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 7de267e1445..4f39dd01936 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -793,6 +793,20 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 	return 0;
 }
 
+static int megasas_slave_configure(struct scsi_device *sdev)
+{
+	/*
+	 * Don't export physical disk devices to the disk driver.
+	 *
+	 * FIXME: Currently we don't export them to the midlayer at all.
+	 * 	  That will be fixed once LSI engineers have audited the
+	 * 	  firmware for possible issues.
+	 */
+	if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
+		return -ENXIO;
+	return 0;
+}
+
 /**
  * megasas_wait_for_outstanding -	Wait for all outstanding cmds
  * @instance:				Adapter soft state
@@ -943,6 +957,7 @@ static struct scsi_host_template megasas_template = {
 	.module = THIS_MODULE,
 	.name = "LSI Logic SAS based MegaRAID driver",
 	.proc_name = "megaraid_sas",
+	.slave_configure = megasas_slave_configure,
 	.queuecommand = megasas_queue_command,
 	.eh_device_reset_handler = megasas_reset_device,
 	.eh_bus_reset_handler = megasas_reset_bus_host,
@@ -1071,20 +1086,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 			break;
 		}
 
-		/*
-		 * Don't export physical disk devices to mid-layer.
-		 */
-		if (!MEGASAS_IS_LOGICAL(cmd->scmd) &&
-		    (hdr->cmd_status == MFI_STAT_OK) &&
-		    (cmd->scmd->cmnd[0] == INQUIRY)) {
-
-			if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) ==
-			    TYPE_DISK) {
-				cmd->scmd->result = DID_BAD_TARGET << 16;
-				exception = 1;
-			}
-		}
-
 	case MFI_CMD_LD_READ:
 	case MFI_CMD_LD_WRITE:
 
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 0c9edb7051f..5609847e254 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -275,10 +275,8 @@ static int aha152x_resume(struct pcmcia_device *dev)
 
 	link->state &= ~DEV_SUSPEND;
 	if (link->state & DEV_CONFIG) {
-		Scsi_Cmnd tmp;
 		pcmcia_request_configuration(link->handle, &link->conf);
-		tmp.device->host = info->host;
-		aha152x_host_reset(&tmp);
+		aha152x_host_reset_host(info->host);
 	}
 
 	return 0;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 5cc97b72166..ff82ccfbb10 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1308,7 +1308,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 	 * the request was not marked fast fail.  Note that above,
 	 * even if the request is marked fast fail, we still requeue
 	 * for queue congestion conditions (QUEUE_FULL or BUSY) */
-	if ((++scmd->retries) < scmd->allowed 
+	if ((++scmd->retries) <= scmd->allowed
 	    && !blk_noretry_request(scmd->request)) {
 		return NEEDS_RETRY;
 	} else {
@@ -1433,7 +1433,7 @@ static void scsi_eh_flush_done_q(struct list_head *done_q)
 		list_del_init(&scmd->eh_entry);
 		if (scsi_device_online(scmd->device) &&
 		    !blk_noretry_request(scmd->request) &&
-		    (++scmd->retries < scmd->allowed)) {
+		    (++scmd->retries <= scmd->allowed)) {
 			SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush"
 							  " retry cmd: %p\n",
 							  current->comm,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 4362dcde74a..701a328f7be 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1498,7 +1498,7 @@ static void scsi_kill_request(struct request *req, request_queue_t *q)
 static void scsi_softirq_done(struct request *rq)
 {
 	struct scsi_cmnd *cmd = rq->completion_data;
-	unsigned long wait_for = cmd->allowed * cmd->timeout_per_command;
+	unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command;
 	int disposition;
 
 	INIT_LIST_HEAD(&cmd->eh_entry);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 5acb83ca5ae..f9ecc3dea7d 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -752,8 +752,20 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
 
 	transport_configure_device(&sdev->sdev_gendev);
 
-	if (sdev->host->hostt->slave_configure)
-		sdev->host->hostt->slave_configure(sdev);
+	if (sdev->host->hostt->slave_configure) {
+		int ret = sdev->host->hostt->slave_configure(sdev);
+		if (ret) {
+			/*
+			 * if LLDD reports slave not present, don't clutter
+			 * console with alloc failure messages
+			 */
+			if (ret != -ENXIO) {
+				sdev_printk(KERN_ERR, sdev,
+					"failed to configure device\n");
+			}
+			return SCSI_SCAN_NO_RESPONSE;
+		}
+	}
 
 	/*
 	 * Ok, the device is now all set up, we can
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index f2c9acf11bd..929032e370d 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -1498,8 +1498,7 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel,
 	}
 
 	/* Search the bindings array */
-	if (likely((ids->roles & FC_RPORT_ROLE_FCP_TARGET) &&
-		(fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE))) {
+	if (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE) {
 
 		/* search for a matching consistent binding */
 
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 2a547538d44..5a0a19322d0 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -2162,7 +2162,7 @@ sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size)
 
 	srp->res_used = 1;
 	SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size));
-	rem = size = (size + 1) & (~1);	/* round to even for aha1542 */
+	rem = size;
 
 	for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) {
 		num = sg->length;
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index 5d02ff4db6c..b65462f7648 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -192,7 +192,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 	SDev = cd->device;
 
 	if (!sense) {
-		sense = kmalloc(sizeof(*sense), GFP_KERNEL);
+		sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
 		if (!sense) {
 			err = -ENOMEM;
 			goto out;
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index f4854c33f48..2627000ca65 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -919,6 +919,8 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
 
 		tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
 		tp->usrtags = SYM_SETUP_MAX_TAG;
+		tp->usr_width = np->maxwide;
+		tp->usr_period = 9;
 
 		sym_nvram_setup_target(tp, i, nvram);
 
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 419dd3cd786..193722d680c 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -420,10 +420,8 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
 	if (up->port.info == NULL)
 		goto ack_tx_int;
 	xmit = &up->port.info->xmit;
-	if (uart_circ_empty(xmit)) {
-		uart_write_wakeup(&up->port);
+	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
-	}
 	if (uart_tx_stopped(&up->port))
 		goto ack_tx_int;
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 95fb4939c67..cc1faa31d12 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -71,6 +71,11 @@ static void uart_change_pm(struct uart_state *state, int pm_state);
 void uart_write_wakeup(struct uart_port *port)
 {
 	struct uart_info *info = port->info;
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	BUG_ON(!info);
 	tasklet_schedule(&info->tlet);
 }
 
@@ -471,14 +476,26 @@ static void uart_flush_chars(struct tty_struct *tty)
 }
 
 static int
-uart_write(struct tty_struct *tty, const unsigned char * buf, int count)
+uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
-	struct circ_buf *circ = &state->info->xmit;
+	struct uart_port *port;
+	struct circ_buf *circ;
 	unsigned long flags;
 	int c, ret = 0;
 
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	if (!state || !state->info) {
+		WARN_ON(1);
+		return -EL3HLT;
+	}
+
+	port = state->port;
+	circ = &state->info->xmit;
+
 	if (!circ->buf)
 		return 0;
 
@@ -521,6 +538,15 @@ static void uart_flush_buffer(struct tty_struct *tty)
 	struct uart_port *port = state->port;
 	unsigned long flags;
 
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	if (!state || !state->info) {
+		WARN_ON(1);
+		return;
+	}
+
 	DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
 
 	spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 43e67d6c29d..60ea4a3f071 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -820,7 +820,7 @@ static int __init sn_sal_module_init(void)
 	int retval;
 
 	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "sn_console: Console driver init\n");
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 30870456694..4e453fa966a 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -299,13 +299,10 @@ static void sunsu_start_tx(struct uart_port *port)
 static void sunsu_stop_rx(struct uart_port *port)
 {
 	struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
-	unsigned long flags;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	up->ier &= ~UART_IER_RLSI;
 	up->port.read_status_mask &= ~UART_LSR_DR;
 	serial_out(up, UART_IER, up->ier);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static void sunsu_enable_ms(struct uart_port *port)
diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig
index d95265b187a..a3473162587 100644
--- a/drivers/sn/Kconfig
+++ b/drivers/sn/Kconfig
@@ -3,10 +3,11 @@
 #
 
 menu "SN Devices"
+	depends on SGI_SN
 
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER
+	depends on MMTIMER
 	default m
 	---help---
 	This option enables basic support for the SGI IOC4-based Base IO
@@ -19,7 +20,6 @@ config SGI_IOC4
 
 config SGI_IOC3
 	tristate "SGI IOC3 Base IO support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2)
 	default m
 	---help---
 	This option enables basic support for the SGI IOC3-based Base IO
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 12357e1fa55..93449a1a006 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -62,7 +62,7 @@ static int nic_reset(struct ioc3_driver_data *idd)
         return presence;
 }
 
-static inline int nic_read_bit(struct ioc3_driver_data *idd)
+static int nic_read_bit(struct ioc3_driver_data *idd)
 {
 	int result;
 	unsigned long flags;
@@ -77,7 +77,7 @@ static inline int nic_read_bit(struct ioc3_driver_data *idd)
 	return result;
 }
 
-static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
+static void nic_write_bit(struct ioc3_driver_data *idd, int bit)
 {
 	if (bit)
 		writel(mcr_pack(6, 110), &idd->vma->mcr);
@@ -371,8 +371,7 @@ static void probe_nic(struct ioc3_driver_data *idd)
 
 /* Interrupts */
 
-static inline void
-write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
+static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
 {
 	unsigned long flags;
 
@@ -735,14 +734,12 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	}
 
 	/* Add this IOC3 to all submodules */
-	read_lock(&ioc3_submodules_lock);
 	for(id=0;id<IOC3_MAX_SUBMODULES;id++)
 		if(ioc3_submodules[id] && ioc3_submodules[id]->probe) {
 			idd->active[id] = 1;
 			idd->active[id] = !ioc3_submodules[id]->probe
 						(ioc3_submodules[id], idd);
 		}
-	read_unlock(&ioc3_submodules_lock);
 
 	printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev));
 
@@ -767,7 +764,6 @@ static void ioc3_remove(struct pci_dev *pdev)
 	idd = pci_get_drvdata(pdev);
 
 	/* Remove this IOC3 from all submodules */
-	read_lock(&ioc3_submodules_lock);
 	for(id=0;id<IOC3_MAX_SUBMODULES;id++)
 		if(idd->active[id]) {
 			if(ioc3_submodules[id] && ioc3_submodules[id]->remove)
@@ -781,7 +777,6 @@ static void ioc3_remove(struct pci_dev *pdev)
 					        pci_name(pdev));
 			idd->active[id] = 0;
 		}
-	read_unlock(&ioc3_submodules_lock);
 
 	/* Clear and disable all IRQs */
 	write_ireg(idd, ~0, IOC3_W_IEC);
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index e02fea5a543..1a362c5e7f3 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -1062,11 +1062,11 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep,
 	ep->pio_irqs = 0;
 	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
 
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
 	/* Reset halt state (does flush) */
 	lh7a40x_set_halt(_ep, 0);
 
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
 	DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
 	return 0;
 }
@@ -1775,6 +1775,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr)
 					break;
 
 				qep = &dev->ep[ep_num];
+				spin_unlock(&dev->lock);
 				if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
 					DEBUG_SETUP("SET_FEATURE (%d)\n",
 						    ep_num);
@@ -1784,6 +1785,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr)
 						    ep_num);
 					lh7a40x_set_halt(&qep->ep, 0);
 				}
+				spin_lock(&dev->lock);
 				usb_set_index(0);
 
 				/* Reply with a ZLP on next IN token */
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 9689efeb364..6d6eaad7396 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -853,11 +853,14 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
 	// DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
 	if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
 	
-	/* 
-	 * we need more memory: 
-	 * oid_supported_list is the largest answer 
+	/*
+	 * we need more memory:
+	 * gen_ndis_query_resp expects enough space for
+	 * rndis_query_cmplt_type followed by data.
+	 * oid_supported_list is the largest data reply
 	 */
-	r = rndis_add_response (configNr, sizeof (oid_supported_list));
+	r = rndis_add_response (configNr,
+		sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type));
 	if (!r)
 		return -ENOMEM;
 	resp = (rndis_query_cmplt_type *) r->buf;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 118288d9442..9e81c26313f 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -260,12 +260,13 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 						offset + EHCI_USBLEGCTLSTS,
 						val | EHCI_USBLEGCTLSTS_SOOE);
 #endif
-			}
 
-			/* always say Linux will own the hardware
-			 * by setting EHCI_USBLEGSUP_OS.
-			 */
-			pci_write_config_byte(pdev, offset + 3, 1);
+				/* some systems get upset if this semaphore is
+				 * set for any other reason than forcing a BIOS
+				 * handoff..
+				 */
+				pci_write_config_byte(pdev, offset + 3, 1);
+			}
 
 			/* if boot firmware now owns EHCI, spin till
 			 * it hands it over.
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 772478086bd..07a012f8877 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1407,6 +1407,7 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_WISEGROUP		0x0925
 #define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
+#define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
 
 #define USB_VENDOR_ID_CODEMERCS		0x07c0
 #define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
@@ -1577,6 +1578,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
 	{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f2b4ca8692d..c145e1ed842 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -469,8 +469,14 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ca40f16370f..bdef3b8c731 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -333,10 +333,18 @@
 
 /*
  * microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
  */
+#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */
 #define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
 #define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface */
 
 /*
  * Active Robots product ids.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4dd6865d32b..b5c96e74a90 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -242,8 +242,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 
 	down(&port->sem);
 
-	if (port->open_count == 0)
-		goto out;
+	if (port->open_count == 0) {
+		up(&port->sem);
+		return;
+	}
 
 	--port->open_count;
 	if (port->open_count == 0) {
@@ -260,10 +262,8 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 		module_put(port->serial->type->driver.owner);
 	}
 
-	kref_put(&port->serial->kref, destroy_serial);
-
-out:
 	up(&port->sem);
+	kref_put(&port->serial->kref, destroy_serial);
 }
 
 static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index bce3d55affd..11a48d87475 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -69,6 +69,8 @@ static struct usb_device_id id_table [] = {
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
@@ -139,6 +141,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+	{ USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index b84d1cb4c69..765118d83fb 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -36,6 +36,9 @@
 #define PALM_ZIRE_ID			0x0070
 #define PALM_M100_ID			0x0080
 
+#define GSPDA_VENDOR_ID		0x115e
+#define GSPDA_XPLORE_M68_ID		0xf100
+
 #define SONY_VENDOR_ID			0x054C
 #define SONY_CLIE_3_5_ID		0x0038
 #define SONY_CLIE_4_0_ID		0x0066
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e71c5ca1a07..31ca92056c2 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -753,6 +753,13 @@ UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
 		"Flashgate",
 		US_SC_SCSI, US_PR_BULK, NULL, 0 ), 
 
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
+		"Thomson Multimedia Inc.",
+		"RCA RD1080 MP3 Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200, 
 		"Sandisk",
 		"ImageMate SDDR-05a",