Staging: IIO: Initial documentation

This needs considerably more work, all comments / suggestions
welcomed.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 files changed, 600 insertions, 0 deletions

diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
new file mode 100644
index 00000000000..6916cd33335
--- /dev/null
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -0,0 +1,49 @@
+IIO Device drivers
+
+This is not intended to provide a comprehensive guide to writing an
+IIO device driver.  For further information see the drivers within the
+subsystem.
+
+The crucial structure for device drivers in iio is iio_dev.
+
+First allocate one using:
+
+struct iio_dev *indio_dev = iio_allocate_device();
+
+The fill in the following.
+
+indio_dev->dev.parent
+  the struct device associated with the underlying hardware.
+
+indio_dev->num_interrupt_lines
+   number of event triggering hardware lines the device has.
+
+indio_dev->event_attrs
+   attributes used to enable / disable hardware events - note the
+   attributes are embedded in iio_event_attr structures with an
+   associated iio_event_handler which may or may note be shared.
+   If num_interrupt_lines = 0, then no need to fill this in.
+
+indio_dev->attrs
+   general attributes such as polled access to device channels.
+
+indio_dev->dev_data
+   private device specific data.
+
+indio_dev->driver_module
+   typically set to THIS_MODULE. Used to specify ownership of some
+   iio created resources.
+
+indio_dev->modes
+   whether direct access and / or ring buffer access is supported.
+
+Once these are set up, a call to iio_device_register(indio_dev),
+will register the device with the iio core.
+
+Worth noting here is that, if a ring buffer is to be used, it can be
+allocated prior to registering the device with the iio-core, but must
+be registered afterwards (otherwise the whole parentage of devices
+gets confused)
+
+On remove iio_device_unregister(indio_dev) will remove the device from
+the core, and iio_free_device will clean up.
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
new file mode 100644
index 00000000000..74d31247337
--- /dev/null
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -0,0 +1,159 @@
+/* IIO - useful set of util functionality
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#define IIO_EVENT_CODE_RING_50_FULL 200
+#define IIO_EVENT_CODE_RING_75_FULL 201
+#define IIO_EVENT_CODE_RING_100_FULL 202
+
+struct iio_event_data {
+	int id;
+	__s64 timestamp;
+};
+
+
+inline char *find_ring_subelement(const char *directory, const char *subelement)
+{
+	DIR *dp;
+	const struct dirent *ent;
+	int pos;
+	char temp[100];
+	char *returnstring;
+	dp = opendir(directory);
+	if (dp == NULL) {
+		printf("could not directory: %s\n", directory);
+		return NULL;
+	}
+	while (ent = readdir(dp), ent != NULL) {
+		if (strcmp(ent->d_name, ".") != 0 &&
+		    strcmp(ent->d_name, "..") != 0)  {
+			if (strncmp(ent->d_name, subelement, strlen(subelement)) == 0) {
+				int length = sprintf(temp, "%s%s%s", directory, ent->d_name, "/");
+				returnstring = malloc(length+1);
+				strncpy(returnstring, temp, length+1);
+				return returnstring;
+
+			}
+		}
+	}
+	return 0;
+}
+
+
+char *find_type_by_name(const char *name, const char *type)
+{
+	const char *iio_dir = "/sys/class/iio/";
+	const struct dirent *ent;
+	int cnt, pos, pos2;
+
+	FILE *nameFile;
+	DIR *dp;
+	char thisname[100];
+	char temp[100];
+
+	char *returnstring = NULL;
+	struct stat Stat;
+	pos = sprintf(temp, "%s", iio_dir);
+	dp = opendir(iio_dir);
+	if (dp == NULL) {
+		printf("No industrialio devices available");
+		return NULL;
+	}
+	while (ent = readdir(dp), ent != NULL) {
+		cnt++;
+		/*reject . and .. */
+		if (strcmp(ent->d_name, ".") != 0 &&
+		    strcmp(ent->d_name, "..") != 0)  {
+			/*make sure it isn't a trigger!*/
+			if (strncmp(ent->d_name, type, strlen(type)) == 0) {
+				/* build full path to new file */
+				pos2 = pos + sprintf(temp + pos, "%s/", ent->d_name);
+				sprintf(temp + pos2, "name");
+				printf("search location %s\n", temp);
+				nameFile = fopen(temp, "r");
+				if (!nameFile) {
+					sprintf(temp + pos2, "modalias", ent->d_name);
+					nameFile = fopen(temp, "r");
+					if (!nameFile) {
+						printf("Failed to find a name for device\n");
+						return NULL;
+					}
+				}
+				fscanf(nameFile, "%s", thisname);
+				if (strcmp(name, thisname) == 0) {
+					returnstring = malloc(strlen(temp) + 1);
+					sprintf(temp + pos2, "");
+					strcpy(returnstring, temp);
+					return returnstring;
+				}
+				fclose(nameFile);
+
+			}
+		}
+	}
+}
+
+int write_sysfs_int(char *filename, char *basedir, int val)
+{
+	int ret;
+	FILE  *sysfsfp;
+	char temp[100];
+	sprintf(temp, "%s%s", basedir, filename);
+	sysfsfp = fopen(temp, "w");
+	if (sysfsfp == NULL)
+		return -1;
+	fprintf(sysfsfp, "%d", val);
+	fclose(sysfsfp);
+	return 0;
+}
+
+/**
+ * write_sysfs_string_and_verify() - string write, readback and verify
+ * @filename: name of file to write to
+ * @basedir: the sysfs directory in which the file is to be found
+ * @val: the string to write
+ **/
+int write_sysfs_string_and_verify(char *filename, char *basedir, char *val)
+{
+	int ret;
+	FILE  *sysfsfp;
+	char temp[100];
+	sprintf(temp, "%s%s", basedir, filename);
+	sysfsfp = fopen(temp, "w");
+	if (sysfsfp == NULL)
+		return -1;
+	fprintf(sysfsfp, "%s", val);
+	fclose(sysfsfp);
+
+	sysfsfp = fopen(temp, "r");
+	if (sysfsfp == NULL)
+		return -1;
+	fscanf(sysfsfp, "%s", temp);
+	if (strcmp(temp, val) != 0) {
+		printf("Possible failure in string write %s to %s%s \n",
+		       val,
+		       basedir,
+		       filename);
+		return -1;
+	}
+	return 0;
+}
+
+int read_sysfs_posint(char *filename, char *basedir)
+{
+	int ret;
+	FILE  *sysfsfp;
+	char temp[100];
+	sprintf(temp, "%s%s", basedir, filename);
+	sysfsfp = fopen(temp, "r");
+	if (sysfsfp == NULL)
+		return -1;
+	fscanf(sysfsfp, "%d\n", &ret);
+	fclose(sysfsfp);
+	return ret;
+}
diff --git a/drivers/staging/iio/Documentation/lis3l02dqbuffersimple.c b/drivers/staging/iio/Documentation/lis3l02dqbuffersimple.c
new file mode 100644
index 00000000000..2b5cfc58d78
--- /dev/null
+++ b/drivers/staging/iio/Documentation/lis3l02dqbuffersimple.c
@@ -0,0 +1,171 @@
+/* Industrialio test ring buffer with a lis3l02dq acceleromter
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Assumes suitable udev rules are used to create the dev nodes as named here.
+ */
+
+#include <dirent.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/dir.h>
+
+#include <linux/types.h>
+#include <dirent.h>
+#include "iio_util.h"
+
+static const char *ring_access = "/dev/iio/lis3l02dq_ring_access";
+static const char *ring_event = "/dev/iio/lis3l02dq_ring_event";
+static const char *device_name = "lis3l02dq";
+static const char *trigger_name = "lis3l02dq-dev0";
+static int NumVals = 3;
+static int scan_ts = 1;
+static int RingLength = 128;
+
+/*
+ * Could get this from ring bps, but only after starting the ring
+ * which is a bit late for it to be useful
+ */
+int size_from_scanmode(int numVals, int timestamp)
+{
+	if (numVals && timestamp)
+		return 16;
+	else if (timestamp)
+		return 8;
+	else
+		return numVals*2;
+}
+
+int main(int argc, char **argv)
+{
+	int i, j, k, toread;
+	FILE *fp_ev;
+	int fp;
+	char *data;
+	size_t read_size;
+	struct iio_event_data dat;
+
+	char	*BaseDirectoryName,
+		*TriggerDirectoryName,
+		*RingBufferDirectoryName;
+
+	BaseDirectoryName = find_type_by_name(device_name, "device");
+	if (BaseDirectoryName == NULL) {
+		printf("Failed to find the %s \n", device_name);
+		return -1;
+	}
+	TriggerDirectoryName = find_type_by_name(trigger_name, "trigger");
+	if (TriggerDirectoryName == NULL) {
+		printf("Failed to find the %s\n", trigger_name);
+		return -1;
+	}
+	RingBufferDirectoryName = find_ring_subelement(BaseDirectoryName,
+						       "ring_buffer");
+	if (RingBufferDirectoryName == NULL) {
+		printf("Failed to find ring buffer\n");
+		return -1;
+	}
+
+	if (write_sysfs_string_and_verify("trigger/current_trigger",
+					  BaseDirectoryName,
+					  (char *)trigger_name) < 0) {
+		printf("Failed to write current_trigger file \n");
+		return -1;
+	}
+
+	/* Setup ring buffer parameters */
+	if (write_sysfs_int("length", RingBufferDirectoryName,
+			    RingLength) < 0) {
+		printf("Failed to open the ring buffer length file \n");
+		return -1;
+	}
+
+	/* Enable the ring buffer */
+	if (write_sysfs_int("ring_enable", RingBufferDirectoryName, 1) < 0) {
+		printf("Failed to open the ring buffer control file \n");
+		return -1;
+	};
+
+	data = malloc(size_from_scanmode(NumVals, scan_ts)*RingLength);
+	if (!data) {
+		printf("Could not allocate space for usespace data store\n");
+		return -1;
+	}
+
+	/* Attempt to open non blocking the access dev */
+	fp = open(ring_access, O_RDONLY | O_NONBLOCK);
+	if (fp == -1) { /*If it isn't there make the node */
+		printf("Failed to open %s\n", ring_access);
+		return -1;
+	}
+	/* Attempt to open the event access dev (blocking this time) */
+	fp_ev = fopen(ring_event, "rb");
+	if (fp_ev == NULL) {
+		printf("Failed to open %s\n", ring_event);
+		return -1;
+	}
+
+	/* Wait for events 10 times */
+	for (j = 0; j < 10; j++) {
+		read_size = fread(&dat, 1, sizeof(struct iio_event_data),
+				  fp_ev);
+		switch (dat.id) {
+		case IIO_EVENT_CODE_RING_100_FULL:
+			toread = RingLength;
+			break;
+		case IIO_EVENT_CODE_RING_75_FULL:
+			toread = RingLength*3/4;
+			break;
+		case IIO_EVENT_CODE_RING_50_FULL:
+			toread = RingLength/2;
+			break;
+		default:
+			printf("Unexpecteded event code\n");
+			continue;
+		}
+		read_size = read(fp,
+				 data,
+				 toread*size_from_scanmode(NumVals, scan_ts));
+		if (read_size == -EAGAIN) {
+			printf("nothing available \n");
+			continue;
+		}
+
+		for (i = 0;
+		     i < read_size/size_from_scanmode(NumVals, scan_ts);
+		     i++) {
+			for (k = 0; k < NumVals; k++) {
+				__s16 val = *(__s16 *)(&data[i*size_from_scanmode(NumVals, scan_ts)
+							     + (k)*2]);
+				printf("%05d ", val);
+			}
+			printf(" %lld\n",
+			       *(__s64 *)(&data[(i+1)*size_from_scanmode(NumVals, scan_ts)
+						- sizeof(__s64)]));
+		}
+	}
+
+	/* Stop the ring buffer */
+	if (write_sysfs_int("ring_enable", RingBufferDirectoryName, 0) < 0) {
+		printf("Failed to open the ring buffer control file \n");
+		return -1;
+	};
+
+	/* Disconnect from the trigger - writing something that doesn't exist.*/
+	write_sysfs_string_and_verify("trigger/current_trigger",
+				      BaseDirectoryName, "NULL");
+	free(BaseDirectoryName);
+	free(TriggerDirectoryName);
+	free(RingBufferDirectoryName);
+	free(data);
+
+	return 0;
+}
diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt
new file mode 100644
index 00000000000..64584ad4024
--- /dev/null
+++ b/drivers/staging/iio/Documentation/overview.txt
@@ -0,0 +1,62 @@
+Overview of IIO
+
+The Industrial I/O subsytem is intended to provide support for devices
+that in some sense are analog to digital convertors (ADCs). As many
+actual devices combine some ADCs with digital to analog convertors
+(DACs) the intention is to add that functionality at a future date
+(hence the name).
+
+The aim is to fill the gap between the somewhat similar hwmon and
+input subsystems.  Hwmon is very much directed at low sample rate
+sensors used in applications such as fan speed control and temperature
+measurement.  Input is, as it's name suggests focused on input
+devices. In some cases there is considerable overlap between these and
+IIO.
+
+A typical device falling into this category would be connected via SPI
+or I2C.
+
+Functionality of IIO
+
+* Basic device registration and handling. This is very similar to
+hwmon with simple polled access to device channels via sysfs.
+
+* Event chrdevs.  These are similar to input in that they provide a
+route to user space for hardware triggered events. Such events include
+threshold detectors, free-fall detectors and more complex action
+detection.  They events themselves are currently very simple with
+merely an event code and a timestamp.  Any data associated with the
+event must be accessed via polling. Note a given device may have one
+or more event channel.  These events are turned on or off (if possible)
+via sysfs interfaces.
+
+* Hardware ring buffer support.  Some recent sensors have included
+fifo / ring buffers on the sensor chip.  These greatly reduce the load
+on the host CPU by buffering relatively large numbers of data samples
+based on an internal sampling clock. Examples include VTI SCA3000
+series and Analog Device ADXL345 accelerometers.  Each ring buffer
+typically has an event chrdev (similar to the more general ones above)
+to pass on events such as buffer 50% full and an access chrdev via
+which the raw data it self may be read back.
+
+* Trigger and software ring buffer support. In many data analysis
+applications it it useful to be able to capture data based on some
+external signal (trigger).  These triggers might be a data ready
+signal, a gpio line connected to some external system or an on
+processor periodic interrupt.  A single trigger many initialize data
+capture or reading from a number of sensors.  These triggers are
+used in iio to fill software ring buffers acting in a very similar
+fashion to the hardware buffers described above.
+
+Other documentation:
+
+userspace.txt - overview of ring buffer reading from userspace
+
+device.txt - elemennts of a typical device driver.
+
+trigger.txt - elements of a typical trigger driver.
+
+ring.txt - additional elements required for ring buffer support
+
+
+
diff --git a/drivers/staging/iio/Documentation/ring.txt b/drivers/staging/iio/Documentation/ring.txt
new file mode 100644
index 00000000000..d2ca6834c16
--- /dev/null
+++ b/drivers/staging/iio/Documentation/ring.txt
@@ -0,0 +1,61 @@
+Ring buffer support within IIO
+
+This document is intended as a general overview of the functionality
+a ring buffer may supply and how it is specified within IIO.  For more
+specific information on a given ring buffer implementation, see the
+comments in the source code.  Note that the intention is to allow
+some drivers to specify ring buffers choice at probe or runtime, but
+for now the selection is hard coded within a given driver.
+
+A given ring buffer implementation typically embedded a struct
+iio_ring_buffer and it is a pointer to this that is provided to the
+IIO core. Access to the embedding structure is typically done via
+container_of functions.
+
+struct iio_ring_buffer contains 4 function pointers
+(preenable, postenable, predisable, postdisable).
+These are used to perform implementation specific steps on either side
+of the core changing it's current mode to indicate that the ring buffer
+is enabled or disabled (along with enabling triggering etc as appropriate).
+
+Also in struct iio_ring_buffer is a struct iio_ring_access_funcs.
+The function pointers within here are used to allow the core to handle
+as much ring buffer functionality as possible. Note almost all of these
+are optional.
+
+mark_in_use, unmark_in_use
+  Basically indicate that not changes should be made to the ring
+  buffer state that will effect the form of the data being captures
+  (e.g. scan elements or length)
+
+store_to
+  If possible, push data to ring buffer.
+
+read_last
+  If possible get the most recent entry from the buffer (without removal).
+  This provides polling like functionality whilst the ring buffering is in
+  use without a separate read from the device.
+
+rip_lots
+  The primary ring buffer reading function. Note that it may well not return
+  as much data as requested.  The deadoffset is used to indicate that some
+  initial data in the data array is not guaranteed to be valid.
+
+mark_param_changed
+  Used to indicate that something has changed. Used in conjunction with
+request_update
+  If parameters have changed that require reinitialization or configuration of
+  the ring buffer this will trigger it.
+
+get_bpd, set_bpd
+  Get/set the number of bytes for a given reading (single element, not sample set)
+  The value of bps (bytes per set) is created from a combination of this and the
+  enabled scan elements.
+
+get_length / set_length
+  Get/set the number of sample sets that may be held by the buffer.
+
+is_enabled
+  Query if ring buffer is in use
+enable
+  Start the ring buffer.
diff --git a/drivers/staging/iio/Documentation/trigger.txt b/drivers/staging/iio/Documentation/trigger.txt
new file mode 100644
index 00000000000..650157f5c9d
--- /dev/null
+++ b/drivers/staging/iio/Documentation/trigger.txt
@@ -0,0 +1,38 @@
+IIO trigger drivers.
+
+Many triggers are provided by hardware that will also be registered as
+an IIO device.  Whilst this can create device specific complexities
+such triggers are registered with the core in the same way as
+stand-alone triggers.
+
+struct iio_trig *trig = iio_allocate_trigger();
+
+allocates a trigger structure.  The key elements to then fill in within
+a driver are:
+
+trig->control_attrs
+	Any sysfs attributes needed to control parameters of the trigger
+
+trig->private_data
+	Device specific private data.
+
+trig->owner
+	Typically set to THIS_MODULE. Used to ensure correct
+	ownership of core allocated resources.
+
+trig->name
+	A unique name for the trigger.
+
+When these have been set call:
+
+iio_trigger_register(trig);
+
+to register the trigger with the core, making it available to trigger
+consumers.
+
+
+Trigger Consumers
+
+Currently triggers are only used for the filling of software ring
+buffers and as such any device supporting INDIO_RING_TRIGGERED has the
+consumer interface automatically created.
diff --git a/drivers/staging/iio/Documentation/userspace.txt b/drivers/staging/iio/Documentation/userspace.txt
new file mode 100644
index 00000000000..661015a0b86
--- /dev/null
+++ b/drivers/staging/iio/Documentation/userspace.txt
@@ -0,0 +1,60 @@
+Userspace access to IIO
+
+Example, ST Microelectronics LIS3L02DQ accelerometer.
+
+Typical sysfs entries (pruned for clarity)
+
+/sys/class/iio
+  device0 - iio_dev related elements
+    name - driver specific identifier (here lis3l02dq)
+    accel_x - polled (or from ring) raw readout of acceleration
+    accel_x_gain - hardware gain (calibration)
+    accel_x_offset - hardware offset (calibration)
+    available_sampling_frequency
+
+    available_sampling_frequency - what options are there
+    sampling_frequency - control of internal sampling frequency
+    scan_elements - controls which channels will be stored in the ring buffer
+      scan_en_accel_x
+      scan_en_accel_y
+      scan_en_timestamp
+    device - link to underlying hardware device
+    uevent - udev related element
+
+    thresh - unified threshold used for detection on all axis
+    event_line0_sources - which events are enabled
+      accel_x_high - enable x axis high threshold event
+      accel_x_low - enable x axis low threshold event
+
+    event_line0 - event interface
+      dev - major:minor for the chrdev (note major allocation dynamic)
+    trigger - consumer attachement
+      current_trigger - name based association with a trigger
+    ring_buffer0 - ring buffer interface
+      bps - byptes per sample (read only), dependant on scan element selection
+      length - (rw) specificy length fo software ring buffer (typically ro in hw case)
+      ring_enable - turn the ring on. If its the first to be enabled attached to this
+                    trigger will also enable the trigger.
+      ring_access0
+        dev - major:minor for ring buffer access chrdev
+      ring_event_line0
+        dev - major:minor for ring buffer event chrdev
+
+  trigger0 - data ready trigger elements
+    name - unqiue name of trigger
+
+Udev will create the following entries under /dev by default:
+
+ring_access0 - ring access chrdev
+ring_event0 - ring event chrdev
+event_line0 - general event chrdev.
+
+For the example code we assume the following rules have been used to ensure
+unique and consistent naming of these for the lis3l02dq in question:
+
+KERNEL="ring_event_line*", ID="spi1.0", DRIVER="lis3l02dq", NAME="iio/lis3l02dq_ring_event"
+KERNEL="event_line*", ID="spi1.0", DRIVER="lis3l02dq", NAME="iio/lis3l02dq_event"
+KERNEL="ring_access*", ID="spi1.0", DRIVER="lis3l02dq", NAME="iio/lis3l02dq_ring_access"
+
+The files, lis3l02dqbuffersimple.c and iio_util.h in this directory provide an example
+of how to use the ring buffer and event interfaces.