aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2007-05-08 17:21:59 +0200
committerJean Delvare <khali@hyperion.delvare>2007-05-08 17:21:59 +0200
commit8eccbb6fb97a5b54a9db166399f0d24f33114522 (patch)
tree0eff8bf78f899cb55c59904d1ed3e3430bf742a3 /drivers
parentce7ee4e80a72d3b1009ca232be8981de93c015f6 (diff)
hwmon/smsc47m1: Add support for the LPC47M292
The new SMSC LPC47M292 Super-I/O chip is a bit different from the previous ones, it supports a 3rd fan, but unfortunately the pin configuration registers are different. Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/Kconfig9
-rw-r--r--drivers/hwmon/smsc47m1.c160
2 files changed, 131 insertions, 38 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68ee9702e33..399b6a92e9b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -422,11 +422,12 @@ config SENSORS_SMSC47M1
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
- LPC47M192 and LPC47M997 chips.
+ LPC47M192, LPC47M292 and LPC47M997 chips.
- The temperature and voltage sensor features of the LPC47M192
- and LPC47M997 are supported by another driver, select also
- "SMSC LPC47M192 and compatibles" below for those.
+ The temperature and voltage sensor features of the LPC47M15x,
+ LPC47M192, LPC47M292 and LPC47M997 are supported by another
+ driver, select also "SMSC LPC47M192 and compatibles" below for
+ those.
This driver can also be built as a module. If so, the module
will be called smsc47m1.
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index beb881c4b2e..16762cca87e 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -3,10 +3,11 @@
for hardware monitoring
Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
- LPC47M14x, LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
+ LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997
+ Super-I/O chips.
Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
- Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2004-2007 Jean Delvare <khali@linux-fr.org>
Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
and Jean Delvare
@@ -40,6 +41,8 @@
/* Address is autodetected, there is no default value */
static unsigned short address;
+static u8 devid;
+enum chips { smsc47m1, smsc47m2 };
/* Super-I/0 registers and commands */
@@ -87,10 +90,18 @@ superio_exit(void)
#define SMSC47M1_REG_ALARM 0x04
#define SMSC47M1_REG_TPIN(nr) (0x34 - (nr))
#define SMSC47M1_REG_PPIN(nr) (0x36 - (nr))
-#define SMSC47M1_REG_PWM(nr) (0x56 + (nr))
#define SMSC47M1_REG_FANDIV 0x58
-#define SMSC47M1_REG_FAN(nr) (0x59 + (nr))
-#define SMSC47M1_REG_FAN_PRELOAD(nr) (0x5B + (nr))
+
+static const u8 SMSC47M1_REG_FAN[3] = { 0x59, 0x5a, 0x6b };
+static const u8 SMSC47M1_REG_FAN_PRELOAD[3] = { 0x5b, 0x5c, 0x6c };
+static const u8 SMSC47M1_REG_PWM[3] = { 0x56, 0x57, 0x69 };
+
+#define SMSC47M2_REG_ALARM6 0x09
+#define SMSC47M2_REG_TPIN1 0x38
+#define SMSC47M2_REG_TPIN2 0x37
+#define SMSC47M2_REG_TPIN3 0x2d
+#define SMSC47M2_REG_PPIN3 0x2c
+#define SMSC47M2_REG_FANDIV3 0x6a
#define MIN_FROM_REG(reg,div) ((reg)>=192 ? 0 : \
983040/((192-(reg))*(div)))
@@ -103,17 +114,18 @@ superio_exit(void)
struct smsc47m1_data {
struct i2c_client client;
+ enum chips type;
struct class_device *class_dev;
struct mutex lock;
struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
- u8 fan[2]; /* Register value */
- u8 fan_preload[2]; /* Register value */
- u8 fan_div[2]; /* Register encoding, shifted right */
+ u8 fan[3]; /* Register value */
+ u8 fan_preload[3]; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
u8 alarms; /* Register encoding */
- u8 pwm[2]; /* Register value (bit 7 is enable) */
+ u8 pwm[3]; /* Register value (bit 0 is disable) */
};
@@ -200,7 +212,7 @@ static ssize_t set_fan_min(struct device *dev, const char *buf,
}
data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
- smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+ smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD[nr],
data->fan_preload[nr]);
mutex_unlock(&data->update_lock);
@@ -234,15 +246,26 @@ static ssize_t set_fan_div(struct device *dev, const char *buf,
return -EINVAL;
}
- tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
- tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
- smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
+ switch (nr) {
+ case 0:
+ case 1:
+ tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV)
+ & ~(0x03 << (4 + 2 * nr));
+ tmp |= data->fan_div[nr] << (4 + 2 * nr);
+ smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
+ break;
+ case 2:
+ tmp = smsc47m1_read_value(client, SMSC47M2_REG_FANDIV3) & 0xCF;
+ tmp |= data->fan_div[2] << 4;
+ smsc47m1_write_value(client, SMSC47M2_REG_FANDIV3, tmp);
+ break;
+ }
/* Preserve fan min */
tmp = 192 - (old_div * (192 - data->fan_preload[nr])
+ new_div / 2) / new_div;
data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
- smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+ smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD[nr],
data->fan_preload[nr]);
mutex_unlock(&data->update_lock);
@@ -263,7 +286,7 @@ static ssize_t set_pwm(struct device *dev, const char *buf,
mutex_lock(&data->update_lock);
data->pwm[nr] &= 0x81; /* Preserve additional bits */
data->pwm[nr] |= PWM_TO_REG(val);
- smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+ smsc47m1_write_value(client, SMSC47M1_REG_PWM[nr],
data->pwm[nr]);
mutex_unlock(&data->update_lock);
@@ -284,7 +307,7 @@ static ssize_t set_pwm_en(struct device *dev, const char *buf,
mutex_lock(&data->update_lock);
data->pwm[nr] &= 0xFE; /* preserve the other bits */
data->pwm[nr] |= !val;
- smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+ smsc47m1_write_value(client, SMSC47M1_REG_PWM[nr],
data->pwm[nr]);
mutex_unlock(&data->update_lock);
@@ -345,6 +368,7 @@ static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
fan_present(1);
fan_present(2);
+fan_present(3);
static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
@@ -358,11 +382,16 @@ static struct attribute *smsc47m1_attributes[] = {
&dev_attr_fan2_input.attr,
&dev_attr_fan2_min.attr,
&dev_attr_fan2_div.attr,
+ &dev_attr_fan3_input.attr,
+ &dev_attr_fan3_min.attr,
+ &dev_attr_fan3_div.attr,
&dev_attr_pwm1.attr,
&dev_attr_pwm1_enable.attr,
&dev_attr_pwm2.attr,
&dev_attr_pwm2_enable.attr,
+ &dev_attr_pwm3.attr,
+ &dev_attr_pwm3_enable.attr,
&dev_attr_alarms.attr,
NULL
@@ -377,7 +406,7 @@ static int __init smsc47m1_find(unsigned short *addr)
u8 val;
superio_enter();
- val = superio_inb(SUPERIO_REG_DEVID);
+ devid = superio_inb(SUPERIO_REG_DEVID);
/*
* SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
@@ -386,18 +415,29 @@ static int __init smsc47m1_find(unsigned short *addr)
* can do much more besides (device id 0x60).
* The LPC47M997 is undocumented, but seems to be compatible with
* the LPC47M192, and has the same device id.
+ * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
+ * supports a 3rd fan, and the pin configuration registers are
+ * unfortunately different.
*/
- if (val == 0x51)
+ switch (devid) {
+ case 0x51:
printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
- else if (val == 0x59)
+ break;
+ case 0x59:
printk(KERN_INFO "smsc47m1: Found SMSC "
"LPC47M10x/LPC47M112/LPC47M13x\n");
- else if (val == 0x5F)
+ break;
+ case 0x5F:
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
- else if (val == 0x60)
+ break;
+ case 0x60:
printk(KERN_INFO "smsc47m1: Found SMSC "
"LPC47M15x/LPC47M192/LPC47M997\n");
- else {
+ break;
+ case 0x6B:
+ printk(KERN_INFO "smsc47m1: Found SMSC LPC47M292\n");
+ break;
+ default:
superio_exit();
return -ENODEV;
}
@@ -421,7 +461,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
struct i2c_client *new_client;
struct smsc47m1_data *data;
int err = 0;
- int fan1, fan2, pwm1, pwm2;
+ int fan1, fan2, fan3, pwm1, pwm2, pwm3;
if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.driver.name)) {
dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
@@ -433,6 +473,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
goto error_release;
}
+ data->type = devid == 0x6B ? smsc47m2 : smsc47m1;
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
@@ -441,20 +482,35 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
new_client->driver = &smsc47m1_driver;
new_client->flags = 0;
- strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
+ strlcpy(new_client->name,
+ data->type == smsc47m2 ? "smsc47m2" : "smsc47m1",
+ I2C_NAME_SIZE);
mutex_init(&data->update_lock);
/* If no function is properly configured, there's no point in
actually registering the chip. */
- fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
- == 0x05;
- fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
- == 0x05;
pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
== 0x04;
pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
== 0x04;
- if (!(fan1 || fan2 || pwm1 || pwm2)) {
+ if (data->type == smsc47m2) {
+ fan1 = (smsc47m1_read_value(new_client, SMSC47M2_REG_TPIN1)
+ & 0x0d) == 0x09;
+ fan2 = (smsc47m1_read_value(new_client, SMSC47M2_REG_TPIN2)
+ & 0x0d) == 0x09;
+ fan3 = (smsc47m1_read_value(new_client, SMSC47M2_REG_TPIN3)
+ & 0x0d) == 0x0d;
+ pwm3 = (smsc47m1_read_value(new_client, SMSC47M2_REG_PPIN3)
+ & 0x0d) == 0x08;
+ } else {
+ fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0))
+ & 0x05) == 0x05;
+ fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1))
+ & 0x05) == 0x05;
+ fan3 = 0;
+ pwm3 = 0;
+ }
+ if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) {
dev_warn(&adapter->dev, "Device at 0x%x is not configured, "
"will not use\n", new_client->addr);
err = -ENODEV;
@@ -497,6 +553,18 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
"skipping\n");
+ if (fan3) {
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_fan3_input))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_fan3_min))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_fan3_div)))
+ goto error_remove_files;
+ } else
+ dev_dbg(&new_client->dev, "Fan 3 not enabled by hardware, "
+ "skipping\n");
+
if (pwm1) {
if ((err = device_create_file(&new_client->dev,
&dev_attr_pwm1))
@@ -506,6 +574,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
} else
dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
"skipping\n");
+
if (pwm2) {
if ((err = device_create_file(&new_client->dev,
&dev_attr_pwm2))
@@ -516,6 +585,16 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
"skipping\n");
+ if (pwm3) {
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_pwm3))
+ || (err = device_create_file(&new_client->dev,
+ &dev_attr_pwm3_enable)))
+ goto error_remove_files;
+ } else
+ dev_dbg(&new_client->dev, "PWM 3 not enabled by hardware, "
+ "skipping\n");
+
if ((err = device_create_file(&new_client->dev, &dev_attr_alarms)))
goto error_remove_files;
@@ -580,15 +659,16 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
- int i;
+ int i, fan_nr;
+ fan_nr = data->type == smsc47m2 ? 3 : 2;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < fan_nr; i++) {
data->fan[i] = smsc47m1_read_value(client,
- SMSC47M1_REG_FAN(i));
+ SMSC47M1_REG_FAN[i]);
data->fan_preload[i] = smsc47m1_read_value(client,
- SMSC47M1_REG_FAN_PRELOAD(i));
+ SMSC47M1_REG_FAN_PRELOAD[i]);
data->pwm[i] = smsc47m1_read_value(client,
- SMSC47M1_REG_PWM(i));
+ SMSC47M1_REG_PWM[i]);
}
i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
@@ -601,6 +681,18 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
if (data->alarms)
smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
+ if (fan_nr >= 3) {
+ data->fan_div[2] = (smsc47m1_read_value(client,
+ SMSC47M2_REG_FANDIV3) >> 4) & 0x03;
+ data->alarms |= (smsc47m1_read_value(client,
+ SMSC47M2_REG_ALARM6) & 0x40) >> 4;
+ /* Clear alarm if needed */
+ if (data->alarms & 0x04)
+ smsc47m1_write_value(client,
+ SMSC47M2_REG_ALARM6,
+ 0x40);
+ }
+
data->last_updated = jiffies;
}