Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (890 commits)
  x86: fix nodemap_size according to nodeid bits
  x86: fix overlap between pagetable with bss section
  x86: add PCI IDs to k8topology_64.c
  x86: fix early_ioremap pagetable ops
  x86: use the same pgd_list for PAE and 64-bit
  x86: defer cr3 reload when doing pud_clear()
  x86: early boot debugging via FireWire (ohci1394_dma=early)
  x86: don't special-case pmd allocations as much
  x86: shrink some ifdefs in fault.c
  x86: ignore spurious faults
  x86: remove nx_enabled from fault.c
  x86: unify fault_32|64.c
  x86: unify fault_32|64.c with ifdefs
  x86: unify fault_32|64.c by ifdef'd function bodies
  x86: arch/x86/mm/init_32.c printk fixes
  x86: arch/x86/mm/init_32.c cleanup
  x86: arch/x86/mm/init_64.c printk fixes
  x86: unify ioremap
  x86: fixes some bugs about EFI memory map handling
  x86: use reboot_type on EFI 32
  ...

19 files changed, 550 insertions, 241 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 8cb37e3557d..d92d4d82d00 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -38,7 +38,7 @@ obj-$(CONFIG_SCSI)		+= scsi/
 obj-$(CONFIG_ATA)		+= ata/
 obj-$(CONFIG_FUSION)		+= message/
 obj-$(CONFIG_FIREWIRE)		+= firewire/
-obj-$(CONFIG_IEEE1394)		+= ieee1394/
+obj-y				+= ieee1394/
 obj-$(CONFIG_UIO)		+= uio/
 obj-y				+= cdrom/
 obj-y				+= auxdisplay/
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2235f4e02d2..eb1f82f7915 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -357,6 +357,26 @@ int acpi_processor_resume(struct acpi_device * device)
 	return 0;
 }
 
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+static int tsc_halts_in_c(int state)
+{
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		/*
+		 * AMD Fam10h TSC will tick in all
+		 * C/P/S0/S1 states when this bit is set.
+		 */
+		if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+			return 0;
+		/*FALL THROUGH*/
+	case X86_VENDOR_INTEL:
+		/* Several cases known where TSC halts in C2 too */
+	default:
+		return state > ACPI_STATE_C1;
+	}
+}
+#endif
+
 #ifndef CONFIG_CPU_IDLE
 static void acpi_processor_idle(void)
 {
@@ -516,7 +536,8 @@ static void acpi_processor_idle(void)
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
 		/* TSC halts in C2, so notify users */
-		mark_tsc_unstable("possible TSC halt in C2");
+		if (tsc_halts_in_c(ACPI_STATE_C2))
+			mark_tsc_unstable("possible TSC halt in C2");
 #endif
 		/* Compute time (ticks) that we were actually asleep */
 		sleep_ticks = ticks_elapsed(t1, t2);
@@ -534,6 +555,7 @@ static void acpi_processor_idle(void)
 		break;
 
 	case ACPI_STATE_C3:
+		acpi_unlazy_tlb(smp_processor_id());
 		/*
 		 * Must be done before busmaster disable as we might
 		 * need to access HPET !
@@ -579,7 +601,8 @@ static void acpi_processor_idle(void)
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
 		/* TSC halts in C3, so notify users */
-		mark_tsc_unstable("TSC halts in C3");
+		if (tsc_halts_in_c(ACPI_STATE_C3))
+			mark_tsc_unstable("TSC halts in C3");
 #endif
 		/* Compute time (ticks) that we were actually asleep */
 		sleep_ticks = ticks_elapsed(t1, t2);
@@ -1423,6 +1446,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 		return 0;
 	}
 
+	acpi_unlazy_tlb(smp_processor_id());
 	/*
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
@@ -1443,7 +1467,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
 	/* TSC could halt in idle, so notify users */
-	mark_tsc_unstable("TSC halts in idle");;
+	if (tsc_halts_in_c(cx->type))
+		mark_tsc_unstable("TSC halts in idle");;
 #endif
 	sleep_ticks = ticks_elapsed(t1, t2);
 
@@ -1554,7 +1579,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
 	/* TSC could halt in idle, so notify users */
-	mark_tsc_unstable("TSC halts in idle");
+	if (tsc_halts_in_c(ACPI_STATE_C3))
+		mark_tsc_unstable("TSC halts in idle");
 #endif
 	sleep_ticks = ticks_elapsed(t1, t2);
 	/* Tell the scheduler how much we idled: */
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index aa5ddb716ff..1ffb381130c 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -145,7 +145,6 @@ static void *m1541_alloc_page(struct agp_bridge_data *bridge)
 	void *addr = agp_generic_alloc_page(agp_bridge);
 	u32 temp;
 
-	global_flush_tlb();
 	if (!addr)
 		return NULL;
 
@@ -162,7 +161,6 @@ static void ali_destroy_page(void * addr, int flags)
 		if (flags & AGP_PAGE_DESTROY_UNMAP) {
 			global_cache_flush();	/* is this really needed?  --hch */
 			agp_generic_destroy_page(addr, flags);
-			global_flush_tlb();
 		} else
 			agp_generic_destroy_page(addr, flags);
 	}
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 832ded20fe7..2720882e66f 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -147,7 +147,6 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 			printk(KERN_ERR PFX "unable to get memory for scratch page.\n");
 			return -ENOMEM;
 		}
-		flush_agp_mappings();
 
 		bridge->scratch_page_real = virt_to_gart(addr);
 		bridge->scratch_page =
@@ -191,7 +190,6 @@ err_out:
 	if (bridge->driver->needs_scratch_page) {
 		bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
 						 AGP_PAGE_DESTROY_UNMAP);
-		flush_agp_mappings();
 		bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
 						 AGP_PAGE_DESTROY_FREE);
 	}
@@ -219,7 +217,6 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge)
 	    bridge->driver->needs_scratch_page) {
 		bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
 						 AGP_PAGE_DESTROY_UNMAP);
-		flush_agp_mappings();
 		bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
 						 AGP_PAGE_DESTROY_FREE);
 	}
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 64b2f6d7059..1a4674ce0c7 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -197,7 +197,6 @@ void agp_free_memory(struct agp_memory *curr)
 		for (i = 0; i < curr->page_count; i++) {
 			curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP);
 		}
-		flush_agp_mappings();
 		for (i = 0; i < curr->page_count; i++) {
 			curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE);
 		}
@@ -267,8 +266,6 @@ struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge,
 	}
 	new->bridge = bridge;
 
-	flush_agp_mappings();
-
 	return new;
 }
 EXPORT_SYMBOL(agp_allocate_memory);
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index e72a83e2bad..76f581c85a7 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -527,7 +527,6 @@ static void *i460_alloc_page (struct agp_bridge_data *bridge)
 
 	if (I460_IO_PAGE_SHIFT <= PAGE_SHIFT) {
 		page = agp_generic_alloc_page(agp_bridge);
-		global_flush_tlb();
 	} else
 		/* Returning NULL would cause problems */
 		/* AK: really dubious code. */
@@ -539,7 +538,6 @@ static void i460_destroy_page (void *page, int flags)
 {
 	if (I460_IO_PAGE_SHIFT <= PAGE_SHIFT) {
 		agp_generic_destroy_page(page, flags);
-		global_flush_tlb();
 	}
 }
 
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 03eac1eb8e0..189efb6ef97 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -210,13 +210,11 @@ static void *i8xx_alloc_pages(void)
 	if (page == NULL)
 		return NULL;
 
-	if (change_page_attr(page, 4, PAGE_KERNEL_NOCACHE) < 0) {
-		change_page_attr(page, 4, PAGE_KERNEL);
-		global_flush_tlb();
+	if (set_pages_uc(page, 4) < 0) {
+		set_pages_wb(page, 4);
 		__free_pages(page, 2);
 		return NULL;
 	}
-	global_flush_tlb();
 	get_page(page);
 	atomic_inc(&agp_bridge->current_memory_agp);
 	return page_address(page);
@@ -230,8 +228,7 @@ static void i8xx_destroy_pages(void *addr)
 		return;
 
 	page = virt_to_page(addr);
-	change_page_attr(page, 4, PAGE_KERNEL);
-	global_flush_tlb();
+	set_pages_wb(page, 4);
 	put_page(page);
 	__free_pages(page, 2);
 	atomic_dec(&agp_bridge->current_memory_agp);
@@ -341,7 +338,6 @@ static struct agp_memory *alloc_agpphysmem_i8xx(size_t pg_count, int type)
 
 	switch (pg_count) {
 	case 1: addr = agp_bridge->driver->agp_alloc_page(agp_bridge);
-		global_flush_tlb();
 		break;
 	case 4:
 		/* kludge to get 4 physical pages for ARGB cursor */
@@ -404,7 +400,6 @@ static void intel_i810_free_by_type(struct agp_memory *curr)
 		else {
 			agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
 							     AGP_PAGE_DESTROY_UNMAP);
-			global_flush_tlb();
 			agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
 							     AGP_PAGE_DESTROY_FREE);
 		}
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 4c16778e3f8..465ad35ed38 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -600,63 +600,6 @@ static int hpet_is_known(struct hpet_data *hdp)
 	return 0;
 }
 
-EXPORT_SYMBOL(hpet_alloc);
-EXPORT_SYMBOL(hpet_register);
-EXPORT_SYMBOL(hpet_unregister);
-EXPORT_SYMBOL(hpet_control);
-
-int hpet_register(struct hpet_task *tp, int periodic)
-{
-	unsigned int i;
-	u64 mask;
-	struct hpet_timer __iomem *timer;
-	struct hpet_dev *devp;
-	struct hpets *hpetp;
-
-	switch (periodic) {
-	case 1:
-		mask = Tn_PER_INT_CAP_MASK;
-		break;
-	case 0:
-		mask = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	tp->ht_opaque = NULL;
-
-	spin_lock_irq(&hpet_task_lock);
-	spin_lock(&hpet_lock);
-
-	for (devp = NULL, hpetp = hpets; hpetp && !devp; hpetp = hpetp->hp_next)
-		for (timer = hpetp->hp_hpet->hpet_timers, i = 0;
-		     i < hpetp->hp_ntimer; i++, timer++) {
-			if ((readq(&timer->hpet_config) & Tn_PER_INT_CAP_MASK)
-			    != mask)
-				continue;
-
-			devp = &hpetp->hp_dev[i];
-
-			if (devp->hd_flags & HPET_OPEN || devp->hd_task) {
-				devp = NULL;
-				continue;
-			}
-
-			tp->ht_opaque = devp;
-			devp->hd_task = tp;
-			break;
-		}
-
-	spin_unlock(&hpet_lock);
-	spin_unlock_irq(&hpet_task_lock);
-
-	if (tp->ht_opaque)
-		return 0;
-	else
-		return -EBUSY;
-}
-
 static inline int hpet_tpcheck(struct hpet_task *tp)
 {
 	struct hpet_dev *devp;
@@ -706,24 +649,6 @@ int hpet_unregister(struct hpet_task *tp)
 	return 0;
 }
 
-int hpet_control(struct hpet_task *tp, unsigned int cmd, unsigned long arg)
-{
-	struct hpet_dev *devp;
-	int err;
-
-	if ((err = hpet_tpcheck(tp)))
-		return err;
-
-	spin_lock_irq(&hpet_lock);
-	devp = tp->ht_opaque;
-	if (devp->hd_task != tp) {
-		spin_unlock_irq(&hpet_lock);
-		return -ENXIO;
-	}
-	spin_unlock_irq(&hpet_lock);
-	return hpet_ioctl_common(devp, cmd, arg, 1);
-}
-
 static ctl_table hpet_table[] = {
 	{
 	 .ctl_name = CTL_UNNUMBERED,
@@ -806,14 +731,14 @@ static unsigned long hpet_calibrate(struct hpets *hpetp)
 
 int hpet_alloc(struct hpet_data *hdp)
 {
-	u64 cap, mcfg;
+	u64 cap, mcfg, hpet_config;
 	struct hpet_dev *devp;
-	u32 i, ntimer;
+	u32 i, ntimer, irq;
 	struct hpets *hpetp;
 	size_t siz;
 	struct hpet __iomem *hpet;
 	static struct hpets *last = NULL;
-	unsigned long period;
+	unsigned long period, irq_bitmap;
 	unsigned long long temp;
 
 	/*
@@ -840,11 +765,47 @@ int hpet_alloc(struct hpet_data *hdp)
 	hpetp->hp_hpet_phys = hdp->hd_phys_address;
 
 	hpetp->hp_ntimer = hdp->hd_nirqs;
+	hpet = hpetp->hp_hpet;
 
-	for (i = 0; i < hdp->hd_nirqs; i++)
-		hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
+	/* Assign IRQs statically for legacy devices */
+	hpetp->hp_dev[0].hd_hdwirq = hdp->hd_irq[0];
+	hpetp->hp_dev[1].hd_hdwirq = hdp->hd_irq[1];
 
-	hpet = hpetp->hp_hpet;
+	/* Assign IRQs dynamically for the others */
+	for (i = 2, devp = &hpetp->hp_dev[2]; i < hdp->hd_nirqs; i++, devp++) {
+		struct hpet_timer __iomem *timer;
+
+		timer = &hpet->hpet_timers[devp - hpetp->hp_dev];
+
+		/* Check if there's already an IRQ assigned to the timer */
+		if (hdp->hd_irq[i]) {
+			hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
+			continue;
+		}
+
+		hpet_config = readq(&timer->hpet_config);
+		irq_bitmap = (hpet_config & Tn_INT_ROUTE_CAP_MASK)
+			>> Tn_INT_ROUTE_CAP_SHIFT;
+		if (!irq_bitmap)
+			irq = 0;        /* No valid IRQ Assignable */
+		else {
+			irq = find_first_bit(&irq_bitmap, 32);
+			do {
+				hpet_config |= irq << Tn_INT_ROUTE_CNF_SHIFT;
+				writeq(hpet_config, &timer->hpet_config);
+
+				/*
+				 * Verify whether we have written a valid
+				 * IRQ number by reading it back again
+				 */
+				hpet_config = readq(&timer->hpet_config);
+				if (irq == (hpet_config & Tn_INT_ROUTE_CNF_MASK)
+						>> Tn_INT_ROUTE_CNF_SHIFT)
+					break;  /* Success */
+			} while ((irq = (find_next_bit(&irq_bitmap, 32, irq))));
+		}
+		hpetp->hp_dev[i].hd_hdwirq = irq;
+	}
 
 	cap = readq(&hpet->hpet_cap);
 
@@ -875,7 +836,8 @@ int hpet_alloc(struct hpet_data *hdp)
 		hpetp->hp_which, hdp->hd_phys_address,
 		hpetp->hp_ntimer > 1 ? "s" : "");
 	for (i = 0; i < hpetp->hp_ntimer; i++)
-		printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
+		printk("%s %d", i > 0 ? "," : "",
+				hpetp->hp_dev[i].hd_hdwirq);
 	printk("\n");
 
 	printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n",
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 0c66b802736..78b151c4d20 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -1,5 +1,5 @@
 /*
- *	Real Time Clock interface for Linux	
+ *	Real Time Clock interface for Linux
  *
  *	Copyright (C) 1996 Paul Gortmaker
  *
@@ -17,7 +17,7 @@
  *	has been received. If a RTC interrupt has already happened,
  *	it will output an unsigned long and then block. The output value
  *	contains the interrupt status in the low byte and the number of
- *	interrupts since the last read in the remaining high bytes. The 
+ *	interrupts since the last read in the remaining high bytes. The
  *	/dev/rtc interface can also be used with the select(2) call.
  *
  *	This program is free software; you can redistribute it and/or
@@ -104,12 +104,14 @@ static int rtc_has_irq = 1;
 
 #ifndef CONFIG_HPET_EMULATE_RTC
 #define is_hpet_enabled()			0
-#define hpet_set_alarm_time(hrs, min, sec) 	0
-#define hpet_set_periodic_freq(arg) 		0
-#define hpet_mask_rtc_irq_bit(arg) 		0
-#define hpet_set_rtc_irq_bit(arg) 		0
-#define hpet_rtc_timer_init() 			do { } while (0)
-#define hpet_rtc_dropped_irq() 			0
+#define hpet_set_alarm_time(hrs, min, sec)	0
+#define hpet_set_periodic_freq(arg)		0
+#define hpet_mask_rtc_irq_bit(arg)		0
+#define hpet_set_rtc_irq_bit(arg)		0
+#define hpet_rtc_timer_init()			do { } while (0)
+#define hpet_rtc_dropped_irq()			0
+#define hpet_register_irq_handler(h)		0
+#define hpet_unregister_irq_handler(h)		0
 #ifdef RTC_IRQ
 static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 {
@@ -147,7 +149,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file,
 static unsigned int rtc_poll(struct file *file, poll_table *wait);
 #endif
 
-static void get_rtc_alm_time (struct rtc_time *alm_tm);
+static void get_rtc_alm_time(struct rtc_time *alm_tm);
 #ifdef RTC_IRQ
 static void set_rtc_irq_bit_locked(unsigned char bit);
 static void mask_rtc_irq_bit_locked(unsigned char bit);
@@ -185,9 +187,9 @@ static int rtc_proc_open(struct inode *inode, struct file *file);
  * rtc_status but before mod_timer is called, which would then reenable the
  * timer (but you would need to have an awful timing before you'd trip on it)
  */
-static unsigned long rtc_status = 0;	/* bitmapped status byte.	*/
-static unsigned long rtc_freq = 0;	/* Current periodic IRQ rate	*/
-static unsigned long rtc_irq_data = 0;	/* our output to the world	*/
+static unsigned long rtc_status;	/* bitmapped status byte.	*/
+static unsigned long rtc_freq;		/* Current periodic IRQ rate	*/
+static unsigned long rtc_irq_data;	/* our output to the world	*/
 static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */
 
 #ifdef RTC_IRQ
@@ -195,7 +197,7 @@ static unsigned long rtc_max_user_freq = 64; /* > this, need CAP_SYS_RESOURCE */
  * rtc_task_lock nests inside rtc_lock.
  */
 static DEFINE_SPINLOCK(rtc_task_lock);
-static rtc_task_t *rtc_callback = NULL;
+static rtc_task_t *rtc_callback;
 #endif
 
 /*
@@ -205,7 +207,7 @@ static rtc_task_t *rtc_callback = NULL;
 
 static unsigned long epoch = 1900;	/* year corresponding to 0x00	*/
 
-static const unsigned char days_in_mo[] = 
+static const unsigned char days_in_mo[] =
 {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
 
 /*
@@ -242,7 +244,7 @@ irqreturn_t rtc_interrupt(int irq, void *dev_id)
 	 *	the last read in the remainder of rtc_irq_data.
 	 */
 
-	spin_lock (&rtc_lock);
+	spin_lock(&rtc_lock);
 	rtc_irq_data += 0x100;
 	rtc_irq_data &= ~0xff;
 	if (is_hpet_enabled()) {
@@ -259,16 +261,16 @@ irqreturn_t rtc_interrupt(int irq, void *dev_id)
 	if (rtc_status & RTC_TIMER_ON)
 		mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
 
-	spin_unlock (&rtc_lock);
+	spin_unlock(&rtc_lock);
 
 	/* Now do the rest of the actions */
 	spin_lock(&rtc_task_lock);
 	if (rtc_callback)
 		rtc_callback->func(rtc_callback->private_data);
 	spin_unlock(&rtc_task_lock);
-	wake_up_interruptible(&rtc_wait);	
+	wake_up_interruptible(&rtc_wait);
 
-	kill_fasync (&rtc_async_queue, SIGIO, POLL_IN);
+	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
 
 	return IRQ_HANDLED;
 }
@@ -335,7 +337,7 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long data;
 	ssize_t retval;
-	
+
 	if (rtc_has_irq == 0)
 		return -EIO;
 
@@ -358,11 +360,11 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 		 * confusing. And no, xchg() is not the answer. */
 
 		__set_current_state(TASK_INTERRUPTIBLE);
-		
-		spin_lock_irq (&rtc_lock);
+
+		spin_lock_irq(&rtc_lock);
 		data = rtc_irq_data;
 		rtc_irq_data = 0;
-		spin_unlock_irq (&rtc_lock);
+		spin_unlock_irq(&rtc_lock);
 
 		if (data != 0)
 			break;
@@ -378,10 +380,13 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 		schedule();
 	} while (1);
 
-	if (count == sizeof(unsigned int))
-		retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int);
-	else
-		retval = put_user(data, (unsigned long __user *)buf) ?: sizeof(long);
+	if (count == sizeof(unsigned int)) {
+		retval = put_user(data,
+				  (unsigned int __user *)buf) ?: sizeof(int);
+	} else {
+		retval = put_user(data,
+				  (unsigned long __user *)buf) ?: sizeof(long);
+	}
 	if (!retval)
 		retval = count;
  out:
@@ -394,7 +399,7 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 
 static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 {
-	struct rtc_time wtime; 
+	struct rtc_time wtime;
 
 #ifdef RTC_IRQ
 	if (rtc_has_irq == 0) {
@@ -426,35 +431,41 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 	}
 	case RTC_PIE_OFF:	/* Mask periodic int. enab. bit	*/
 	{
-		unsigned long flags; /* can be called from isr via rtc_control() */
-		spin_lock_irqsave (&rtc_lock, flags);
+		/* can be called from isr via rtc_control() */
+		unsigned long flags;
+
+		spin_lock_irqsave(&rtc_lock, flags);
 		mask_rtc_irq_bit_locked(RTC_PIE);
 		if (rtc_status & RTC_TIMER_ON) {
 			rtc_status &= ~RTC_TIMER_ON;
 			del_timer(&rtc_irq_timer);
 		}
-		spin_unlock_irqrestore (&rtc_lock, flags);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+
 		return 0;
 	}
 	case RTC_PIE_ON:	/* Allow periodic ints		*/
 	{
-		unsigned long flags; /* can be called from isr via rtc_control() */
+		/* can be called from isr via rtc_control() */
+		unsigned long flags;
+
 		/*
 		 * We don't really want Joe User enabling more
 		 * than 64Hz of interrupts on a multi-user machine.
 		 */
 		if (!kernel && (rtc_freq > rtc_max_user_freq) &&
-			(!capable(CAP_SYS_RESOURCE)))
+						(!capable(CAP_SYS_RESOURCE)))
 			return -EACCES;
 
-		spin_lock_irqsave (&rtc_lock, flags);
+		spin_lock_irqsave(&rtc_lock, flags);
 		if (!(rtc_status & RTC_TIMER_ON)) {
 			mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq +
 					2*HZ/100);
 			rtc_status |= RTC_TIMER_ON;
 		}
 		set_rtc_irq_bit_locked(RTC_PIE);
-		spin_unlock_irqrestore (&rtc_lock, flags);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+
 		return 0;
 	}
 	case RTC_UIE_OFF:	/* Mask ints from RTC updates.	*/
@@ -477,7 +488,7 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 		 */
 		memset(&wtime, 0, sizeof(struct rtc_time));
 		get_rtc_alm_time(&wtime);
-		break; 
+		break;
 	}
 	case RTC_ALM_SET:	/* Store a time into the alarm */
 	{
@@ -505,16 +516,21 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 			 */
 		}
 		if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) ||
-		    RTC_ALWAYS_BCD)
-		{
-			if (sec < 60) BIN_TO_BCD(sec);
-			else sec = 0xff;
-
-			if (min < 60) BIN_TO_BCD(min);
-			else min = 0xff;
-
-			if (hrs < 24) BIN_TO_BCD(hrs);
-			else hrs = 0xff;
+							RTC_ALWAYS_BCD) {
+			if (sec < 60)
+				BIN_TO_BCD(sec);
+			else
+				sec = 0xff;
+
+			if (min < 60)
+				BIN_TO_BCD(min);
+			else
+				min = 0xff;
+
+			if (hrs < 24)
+				BIN_TO_BCD(hrs);
+			else
+				hrs = 0xff;
 		}
 		CMOS_WRITE(hrs, RTC_HOURS_ALARM);
 		CMOS_WRITE(min, RTC_MINUTES_ALARM);
@@ -563,11 +579,12 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 
 		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
 			return -EINVAL;
-			
+
 		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
 			return -EINVAL;
 
-		if ((yrs -= epoch) > 255)    /* They are unsigned */
+		yrs -= epoch;
+		if (yrs > 255)		/* They are unsigned */
 			return -EINVAL;
 
 		spin_lock_irq(&rtc_lock);
@@ -635,9 +652,10 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 	{
 		int tmp = 0;
 		unsigned char val;
-		unsigned long flags; /* can be called from isr via rtc_control() */
+		/* can be called from isr via rtc_control() */
+		unsigned long flags;
 
-		/* 
+		/*
 		 * The max we can do is 8192Hz.
 		 */
 		if ((arg < 2) || (arg > 8192))
@@ -646,7 +664,8 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 		 * We don't really want Joe User generating more
 		 * than 64Hz of interrupts on a multi-user machine.
 		 */
-		if (!kernel && (arg > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE)))
+		if (!kernel && (arg > rtc_max_user_freq) &&
+					!capable(CAP_SYS_RESOURCE))
 			return -EACCES;
 
 		while (arg > (1<<tmp))
@@ -674,11 +693,11 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 #endif
 	case RTC_EPOCH_READ:	/* Read the epoch.	*/
 	{
-		return put_user (epoch, (unsigned long __user *)arg);
+		return put_user(epoch, (unsigned long __user *)arg);
 	}
 	case RTC_EPOCH_SET:	/* Set the epoch.	*/
 	{
-		/* 
+		/*
 		 * There were no RTC clocks before 1900.
 		 */
 		if (arg < 1900)
@@ -693,7 +712,8 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 	default:
 		return -ENOTTY;
 	}
-	return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
+	return copy_to_user((void __user *)arg,
+			    &wtime, sizeof wtime) ? -EFAULT : 0;
 }
 
 static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
@@ -712,26 +732,25 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
  * needed here. Or anywhere else in this driver. */
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	spin_lock_irq (&rtc_lock);
+	spin_lock_irq(&rtc_lock);
 
-	if(rtc_status & RTC_IS_OPEN)
+	if (rtc_status & RTC_IS_OPEN)
 		goto out_busy;
 
 	rtc_status |= RTC_IS_OPEN;
 
 	rtc_irq_data = 0;
-	spin_unlock_irq (&rtc_lock);
+	spin_unlock_irq(&rtc_lock);
 	return 0;
 
 out_busy:
-	spin_unlock_irq (&rtc_lock);
+	spin_unlock_irq(&rtc_lock);
 	return -EBUSY;
 }
 
-static int rtc_fasync (int fd, struct file *filp, int on)
-
+static int rtc_fasync(int fd, struct file *filp, int on)
 {
-	return fasync_helper (fd, filp, on, &rtc_async_queue);
+	return fasync_helper(fd, filp, on, &rtc_async_queue);
 }
 
 static int rtc_release(struct inode *inode, struct file *file)
@@ -762,16 +781,16 @@ static int rtc_release(struct inode *inode, struct file *file)
 	}
 	spin_unlock_irq(&rtc_lock);
 
-	if (file->f_flags & FASYNC) {
-		rtc_fasync (-1, file, 0);
-	}
+	if (file->f_flags & FASYNC)
+		rtc_fasync(-1, file, 0);
 no_irq:
 #endif
 
-	spin_lock_irq (&rtc_lock);
+	spin_lock_irq(&rtc_lock);
 	rtc_irq_data = 0;
 	rtc_status &= ~RTC_IS_OPEN;
-	spin_unlock_irq (&rtc_lock);
+	spin_unlock_irq(&rtc_lock);
+
 	return 0;
 }
 
@@ -786,9 +805,9 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait)
 
 	poll_wait(file, &rtc_wait, wait);
 
-	spin_lock_irq (&rtc_lock);
+	spin_lock_irq(&rtc_lock);
 	l = rtc_irq_data;
-	spin_unlock_irq (&rtc_lock);
+	spin_unlock_irq(&rtc_lock);
 
 	if (l != 0)
 		return POLLIN | POLLRDNORM;
@@ -796,14 +815,6 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait)
 }
 #endif
 
-/*
- * exported stuffs
- */
-
-EXPORT_SYMBOL(rtc_register);
-EXPORT_SYMBOL(rtc_unregister);
-EXPORT_SYMBOL(rtc_control);
-
 int rtc_register(rtc_task_t *task)
 {
 #ifndef RTC_IRQ
@@ -829,6 +840,7 @@ int rtc_register(rtc_task_t *task)
 	return 0;
 #endif
 }
+EXPORT_SYMBOL(rtc_register);
 
 int rtc_unregister(rtc_task_t *task)
 {
@@ -845,7 +857,7 @@ int rtc_unregister(rtc_task_t *task)
 		return -ENXIO;
 	}
 	rtc_callback = NULL;
-	
+
 	/* disable controls */
 	if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) {
 		tmp = CMOS_READ(RTC_CONTROL);
@@ -865,6 +877,7 @@ int rtc_unregister(rtc_task_t *task)
 	return 0;
 #endif
 }
+EXPORT_SYMBOL(rtc_unregister);
 
 int rtc_control(rtc_task_t *task, unsigned int cmd, unsigned long arg)
 {
@@ -883,7 +896,7 @@ int rtc_control(rtc_task_t *task, unsigned int cmd, unsigned long arg)
 	return rtc_do_ioctl(cmd, arg, 1);
 #endif
 }
-
+EXPORT_SYMBOL(rtc_control);
 
 /*
  *	The various file operations we support.
@@ -910,11 +923,11 @@ static struct miscdevice rtc_dev = {
 
 #ifdef CONFIG_PROC_FS
 static const struct file_operations rtc_proc_fops = {
-	.owner = THIS_MODULE,
-	.open = rtc_proc_open,
-	.read  = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
+	.owner		= THIS_MODULE,
+	.open		= rtc_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
 };
 #endif
 
@@ -965,7 +978,7 @@ static int __init rtc_init(void)
 #ifdef CONFIG_SPARC32
 	for_each_ebus(ebus) {
 		for_each_ebusdev(edev, ebus) {
-			if(strcmp(edev->prom_node->name, "rtc") == 0) {
+			if (strcmp(edev->prom_node->name, "rtc") == 0) {
 				rtc_port = edev->resource[0].start;
 				rtc_irq = edev->irqs[0];
 				goto found;
@@ -986,7 +999,8 @@ found:
 	 * XXX Interrupt pin #7 in Espresso is shared between RTC and
 	 * PCI Slot 2 INTA# (and some INTx# in Slot 1).
 	 */
-	if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc", (void *)&rtc_port)) {
+	if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc",
+			(void *)&rtc_port)) {
 		rtc_has_irq = 0;
 		printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
 		return -EIO;
@@ -1015,16 +1029,26 @@ no_irq:
 
 #ifdef RTC_IRQ
 	if (is_hpet_enabled()) {
+		int err;
+
 		rtc_int_handler_ptr = hpet_rtc_interrupt;
+		err = hpet_register_irq_handler(rtc_interrupt);
+		if (err != 0) {
+			printk(KERN_WARNING "hpet_register_irq_handler failed "
+					"in rtc_init().");
+			return err;
+		}
 	} else {
 		rtc_int_handler_ptr = rtc_interrupt;
 	}
 
-	if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
+	if (request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED,
+			"rtc", NULL)) {
 		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
 		rtc_has_irq = 0;
 		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
 		rtc_release_region();
+
 		return -EIO;
 	}
 	hpet_rtc_timer_init();
@@ -1036,6 +1060,7 @@ no_irq:
 	if (misc_register(&rtc_dev)) {
 #ifdef RTC_IRQ
 		free_irq(RTC_IRQ, NULL);
+		hpet_unregister_irq_handler(rtc_interrupt);
 		rtc_has_irq = 0;
 #endif
 		rtc_release_region();
@@ -1052,21 +1077,21 @@ no_irq:
 
 #if defined(__alpha__) || defined(__mips__)
 	rtc_freq = HZ;
-	
+
 	/* Each operating system on an Alpha uses its own epoch.
 	   Let's try to guess which one we are using now. */
-	
+
 	if (rtc_is_updating() != 0)
 		msleep(20);
-	
+
 	spin_lock_irq(&rtc_lock);
 	year = CMOS_READ(RTC_YEAR);
 	ctrl = CMOS_READ(RTC_CONTROL);
 	spin_unlock_irq(&rtc_lock);
-	
+
 	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
 		BCD_TO_BIN(year);       /* This should never happen... */
-	
+
 	if (year < 20) {
 		epoch = 2000;
 		guess = "SRM (post-2000)";
@@ -1087,7 +1112,8 @@ no_irq:
 #endif
 	}
 	if (guess)
-		printk(KERN_INFO "rtc: %s epoch (%lu) detected\n", guess, epoch);
+		printk(KERN_INFO "rtc: %s epoch (%lu) detected\n",
+			guess, epoch);
 #endif
 #ifdef RTC_IRQ
 	if (rtc_has_irq == 0)
@@ -1096,8 +1122,12 @@ no_irq:
 	spin_lock_irq(&rtc_lock);
 	rtc_freq = 1024;
 	if (!hpet_set_periodic_freq(rtc_freq)) {
-		/* Initialize periodic freq. to CMOS reset default, which is 1024Hz */
-		CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06), RTC_FREQ_SELECT);
+		/*
+		 * Initialize periodic frequency to CMOS reset default,
+		 * which is 1024Hz
+		 */
+		CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06),
+			   RTC_FREQ_SELECT);
 	}
 	spin_unlock_irq(&rtc_lock);
 no_irq2:
@@ -1110,20 +1140,22 @@ no_irq2:
 	return 0;
 }
 
-static void __exit rtc_exit (void)
+static void __exit rtc_exit(void)
 {
 	cleanup_sysctl();
-	remove_proc_entry ("driver/rtc", NULL);
+	remove_proc_entry("driver/rtc", NULL);
 	misc_deregister(&rtc_dev);
 
 #ifdef CONFIG_SPARC32
 	if (rtc_has_irq)
-		free_irq (rtc_irq, &rtc_port);
+		free_irq(rtc_irq, &rtc_port);
 #else
 	rtc_release_region();
 #ifdef RTC_IRQ
-	if (rtc_has_irq)
-		free_irq (RTC_IRQ, NULL);
+	if (rtc_has_irq) {
+		free_irq(RTC_IRQ, NULL);
+		hpet_unregister_irq_handler(hpet_rtc_interrupt);
+	}
 #endif
 #endif /* CONFIG_SPARC32 */
 }
@@ -1133,14 +1165,14 @@ module_exit(rtc_exit);
 
 #ifdef RTC_IRQ
 /*
- * 	At IRQ rates >= 4096Hz, an interrupt may get lost altogether.
+ *	At IRQ rates >= 4096Hz, an interrupt may get lost altogether.
  *	(usually during an IDE disk interrupt, with IRQ unmasking off)
  *	Since the interrupt handler doesn't get called, the IRQ status
  *	byte doesn't get read, and the RTC stops generating interrupts.
  *	A timer is set, and will call this function if/when that happens.
  *	To get it out of this stalled state, we just read the status.
  *	At least a jiffy of interrupts (rtc_freq/HZ) will have been lost.
- *	(You *really* shouldn't be trying to use a non-realtime system 
+ *	(You *really* shouldn't be trying to use a non-realtime system
  *	for something that requires a steady > 1KHz signal anyways.)
  */
 
@@ -1148,7 +1180,7 @@ static void rtc_dropped_irq(unsigned long data)
 {
 	unsigned long freq;
 
-	spin_lock_irq (&rtc_lock);
+	spin_lock_irq(&rtc_lock);
 
 	if (hpet_rtc_dropped_irq()) {
 		spin_unlock_irq(&rtc_lock);
@@ -1167,13 +1199,15 @@ static void rtc_dropped_irq(unsigned long data)
 
 	spin_unlock_irq(&rtc_lock);
 
-	if (printk_ratelimit())
-		printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", freq);
+	if (printk_ratelimit()) {
+		printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
+			freq);
+	}
 
 	/* Now we have new data */
 	wake_up_interruptible(&rtc_wait);
 
-	kill_fasync (&rtc_async_queue, SIGIO, POLL_IN);
+	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
 }
 #endif
 
@@ -1277,7 +1311,7 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 	 * can take just over 2ms. We wait 20ms. There is no need to
 	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 	 * If you need to know *exactly* when a second has started, enable
-	 * periodic update complete interrupts, (via ioctl) and then 
+	 * periodic update complete interrupts, (via ioctl) and then
 	 * immediately read /dev/rtc which will block until you get the IRQ.
 	 * Once the read clears, read the RTC time (again via ioctl). Easy.
 	 */
@@ -1307,8 +1341,7 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 	ctrl = CMOS_READ(RTC_CONTROL);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-	{
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
 		BCD_TO_BIN(rtc_tm->tm_sec);
 		BCD_TO_BIN(rtc_tm->tm_min);
 		BCD_TO_BIN(rtc_tm->tm_hour);
@@ -1326,7 +1359,8 @@ void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 	 * Account for differences between how the RTC uses the values
 	 * and how they are defined in a struct rtc_time;
 	 */
-	if ((rtc_tm->tm_year += (epoch - 1900)) <= 69)
+	rtc_tm->tm_year += epoch - 1900;
+	if (rtc_tm->tm_year <= 69)
 		rtc_tm->tm_year += 100;
 
 	rtc_tm->tm_mon--;
@@ -1347,8 +1381,7 @@ static void get_rtc_alm_time(struct rtc_time *alm_tm)
 	ctrl = CMOS_READ(RTC_CONTROL);
 	spin_unlock_irq(&rtc_lock);
 
-	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-	{
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
 		BCD_TO_BIN(alm_tm->tm_sec);
 		BCD_TO_BIN(alm_tm->tm_min);
 		BCD_TO_BIN(alm_tm->tm_hour);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 5efd5550f4c..b730d670952 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1604,7 +1604,7 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	memcpy(&policy->cpuinfo, &data->cpuinfo,
 				sizeof(struct cpufreq_cpuinfo));
 
-	if (policy->min > data->min && policy->min > policy->max) {
+	if (policy->min > data->max || policy->max < data->min) {
 		ret = -EINVAL;
 		goto error_out;
 	}
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 5e596a7e360..9008ed5ef4c 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -8,6 +8,8 @@
 #include <linux/slab.h>
 #include <asm/dmi.h>
 
+static char dmi_empty_string[] = "        ";
+
 static char * __init dmi_string(const struct dmi_header *dm, u8 s)
 {
 	const u8 *bp = ((u8 *) dm) + dm->length;
@@ -21,11 +23,16 @@ static char * __init dmi_string(const struct dmi_header *dm, u8 s)
 		}
 
 		if (*bp != 0) {
-			str = dmi_alloc(strlen(bp) + 1);
+			size_t len = strlen(bp)+1;
+			size_t cmp_len = len > 8 ? 8 : len;
+
+			if (!memcmp(bp, dmi_empty_string, cmp_len))
+				return dmi_empty_string;
+			str = dmi_alloc(len);
 			if (str != NULL)
 				strcpy(str, bp);
 			else
-				printk(KERN_ERR "dmi_string: out of memory.\n");
+				printk(KERN_ERR "dmi_string: cannot allocate %Zu bytes.\n", len);
 		}
 	}
 
@@ -175,12 +182,23 @@ static void __init dmi_save_devices(const struct dmi_header *dm)
 	}
 }
 
+static struct dmi_device empty_oem_string_dev = {
+	.name = dmi_empty_string,
+};
+
 static void __init dmi_save_oem_strings_devices(const struct dmi_header *dm)
 {
 	int i, count = *(u8 *)(dm + 1);
 	struct dmi_device *dev;
 
 	for (i = 1; i <= count; i++) {
+		char *devname = dmi_string(dm, i);
+
+		if (!strcmp(devname, dmi_empty_string)) {
+			list_add(&empty_oem_string_dev.list, &dmi_devices);
+			continue;
+		}
+
 		dev = dmi_alloc(sizeof(*dev));
 		if (!dev) {
 			printk(KERN_ERR
@@ -189,7 +207,7 @@ static void __init dmi_save_oem_strings_devices(const struct dmi_header *dm)
 		}
 
 		dev->type = DMI_DEV_TYPE_OEM_STRING;
-		dev->name = dmi_string(dm, i);
+		dev->name = devname;
 		dev->device_data = NULL;
 
 		list_add(&dev->list, &dmi_devices);
@@ -331,9 +349,11 @@ void __init dmi_scan_machine(void)
 			rc = dmi_present(q);
 			if (!rc) {
 				dmi_available = 1;
+				dmi_iounmap(p, 0x10000);
 				return;
 			}
 		}
+		dmi_iounmap(p, 0x10000);
 	}
  out:	printk(KERN_INFO "DMI not present or invalid.\n");
 }
diff --git a/drivers/ieee1394/Makefile b/drivers/ieee1394/Makefile
index 489c133664d..1f8153b5750 100644
--- a/drivers/ieee1394/Makefile
+++ b/drivers/ieee1394/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_IEEE1394_SBP2) += sbp2.o
 obj-$(CONFIG_IEEE1394_DV1394) += dv1394.o
 obj-$(CONFIG_IEEE1394_ETH1394) += eth1394.o
 
+obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o
diff --git a/drivers/ieee1394/init_ohci1394_dma.c b/drivers/ieee1394/init_ohci1394_dma.c
new file mode 100644
index 00000000000..ddaab6eb8ac
--- /dev/null
+++ b/drivers/ieee1394/init_ohci1394_dma.c
@@ -0,0 +1,285 @@
+/*
+ * init_ohci1394_dma.c - Initializes physical DMA on all OHCI 1394 controllers
+ *
+ * Copyright (C) 2006-2007      Bernhard Kaindl <bk@suse.de>
+ *
+ * Derived from drivers/ieee1394/ohci1394.c and arch/x86/kernel/early-quirks.c
+ * this file has functions to:
+ * - scan the PCI very early on boot for all OHCI 1394-compliant controllers
+ * - reset and initialize them and make them join the IEEE1394 bus and
+ * - enable physical DMA on them to allow remote debugging
+ *
+ * All code and data is marked as __init and __initdata, respective as
+ * during boot, all OHCI1394 controllers may be claimed by the firewire
+ * stack and at this point, this code should not touch them anymore.
+ *
+ * To use physical DMA after the initialization of the firewire stack,
+ * be sure that the stack enables it and (re-)attach after the bus reset
+ * which may be caused by the firewire stack initialization.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/interrupt.h>	/* for ohci1394.h */
+#include <linux/delay.h>
+#include <linux/pci.h>		/* for PCI defines */
+#include <linux/init_ohci1394_dma.h>
+#include <asm/pci-direct.h>	/* for direct PCI config space access */
+#include <asm/fixmap.h>
+
+#include "ieee1394_types.h"
+#include "ohci1394.h"
+
+int __initdata init_ohci1394_dma_early;
+
+/* Reads a PHY register of an OHCI-1394 controller */
+static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr)
+{
+	int i;
+	quadlet_t r;
+
+	reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000);
+
+	for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+		if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000)
+			break;
+		mdelay(1);
+	}
+	r = reg_read(ohci, OHCI1394_PhyControl);
+
+	return (r & 0x00ff0000) >> 16;
+}
+
+/* Writes to a PHY register of an OHCI-1394 controller */
+static inline void __init set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data)
+{
+	int i;
+
+	reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000);
+
+	for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+		u32 r = reg_read(ohci, OHCI1394_PhyControl);
+		if (!(r & 0x00004000))
+			break;
+		mdelay(1);
+	}
+}
+
+/* Resets an OHCI-1394 controller (for sane state before initialization) */
+static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) {
+	int i;
+
+	reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
+
+	for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+		if (!(reg_read(ohci, OHCI1394_HCControlSet)
+				   & OHCI1394_HCControl_softReset))
+			break;
+		mdelay(1);
+	}
+}
+
+/* Basic OHCI-1394 register and port inititalization */
+static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
+{
+	quadlet_t bus_options;
+	int num_ports, i;
+
+	/* Put some defaults to these undefined bus options */
+	bus_options = reg_read(ohci, OHCI1394_BusOptions);
+	bus_options |=  0x60000000; /* Enable CMC and ISC */
+	bus_options &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */
+	bus_options &= ~0x18000000; /* Disable PMC and BMC */
+	reg_write(ohci, OHCI1394_BusOptions, bus_options);
+
+	/* Set the bus number */
+	reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0);
+
+	/* Enable posted writes */
+	reg_write(ohci, OHCI1394_HCControlSet,
+			OHCI1394_HCControl_postedWriteEnable);
+
+	/* Clear link control register */
+	reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
+
+	/* enable phys */
+	reg_write(ohci, OHCI1394_LinkControlSet,
+			OHCI1394_LinkControl_RcvPhyPkt);
+
+	/* Don't accept phy packets into AR request context */
+	reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400);
+
+	/* Clear the Isochonouys interrupt masks */
+	reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
+	reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
+	reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
+	reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
+
+	/* Accept asyncronous transfer requests from all nodes for now */
+	reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000);
+
+	/* Specify asyncronous transfer retries */
+	reg_write(ohci, OHCI1394_ATRetries,
+		  OHCI1394_MAX_AT_REQ_RETRIES |
+		  (OHCI1394_MAX_AT_RESP_RETRIES<<4) |
+		  (OHCI1394_MAX_PHYS_RESP_RETRIES<<8));
+
+	/* We don't want hardware swapping */
+	reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap);
+
+	/* Enable link */
+	reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
+
+	/* If anything is connected to a port, make sure it is enabled */
+	num_ports = get_phy_reg(ohci, 2) & 0xf;
+	for (i = 0; i < num_ports; i++) {
+		unsigned int status;
+
+		set_phy_reg(ohci, 7, i);
+		status = get_phy_reg(ohci, 8);
+
+		if (status & 0x20)
+			set_phy_reg(ohci, 8, status & ~1);
+	}
+}
+
+/**
+ * init_ohci1394_wait_for_busresets - wait until bus resets are completed
+ *
+ * OHCI1394 initialization itself and any device going on- or offline
+ * and any cable issue cause a IEEE1394 bus reset. The OHCI1394 spec
+ * specifies that physical DMA is disabled on each bus reset and it
+ * has to be enabled after each bus reset when needed. We resort
+ * to polling here because on early boot, we have no interrupts.
+ */
+static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci)
+{
+	int i, events;
+
+	for (i=0; i < 9; i++) {
+		mdelay(200);
+		events = reg_read(ohci, OHCI1394_IntEventSet);
+		if (events & OHCI1394_busReset)
+			reg_write(ohci, OHCI1394_IntEventClear,
+					OHCI1394_busReset);
+	}
+}
+
+/**
+ * init_ohci1394_enable_physical_dma - Enable physical DMA for remote debugging
+ * This enables remote DMA access over IEEE1394 from every host for the low
+ * 4GB of address space. DMA accesses above 4GB are not available currently.
+ */
+static inline void __init init_ohci1394_enable_physical_dma(struct ti_ohci *hci)
+{
+	reg_write(hci, OHCI1394_PhyReqFilterHiSet, 0xffffffff);
+	reg_write(hci, OHCI1394_PhyReqFilterLoSet, 0xffffffff);
+	reg_write(hci, OHCI1394_PhyUpperBound, 0xffff0000);
+}
+
+/**
+ * init_ohci1394_reset_and_init_dma - init controller and enable DMA
+ * This initializes the given controller and enables physical DMA engine in it.
+ */
+static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci)
+{
+	/* Start off with a soft reset, clears everything to a sane state. */
+	init_ohci1394_soft_reset(ohci);
+
+	/* Accessing some registers without LPS enabled may cause lock up */
+	reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
+
+	/* Disable and clear interrupts */
+	reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
+	reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
+
+	mdelay(50); /* Wait 50msec to make sure we have full link enabled */
+
+	init_ohci1394_initialize(ohci);
+	/*
+	 * The initialization causes at least one IEEE1394 bus reset. Enabling
+	 * physical DMA only works *after* *all* bus resets have calmed down:
+	 */
+	init_ohci1394_wait_for_busresets(ohci);
+
+	/* We had to wait and do this now if we want to debug early problems */
+	init_ohci1394_enable_physical_dma(ohci);
+}
+
+/**
+ * init_ohci1394_controller - Map the registers of the controller and init DMA
+ * This maps the registers of the specified controller and initializes it
+ */
+static inline void __init init_ohci1394_controller(int num, int slot, int func)
+{
+	unsigned long ohci_base;
+	struct ti_ohci ohci;
+
+	printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394"
+			 " at %02x:%02x.%x\n", num, slot, func);
+
+	ohci_base = read_pci_config(num, slot, func, PCI_BASE_ADDRESS_0+(0<<2))
+						   & PCI_BASE_ADDRESS_MEM_MASK;
+
+	set_fixmap_nocache(FIX_OHCI1394_BASE, ohci_base);
+
+	ohci.registers = (void *)fix_to_virt(FIX_OHCI1394_BASE);
+
+	init_ohci1394_reset_and_init_dma(&ohci);
+}
+
+/**
+ * debug_init_ohci1394_dma - scan for OHCI1394 controllers and init DMA on them
+ * Scans the whole PCI space for OHCI1394 controllers and inits DMA on them
+ */
+void __init init_ohci1394_dma_on_all_controllers(void)
+{
+	int num, slot, func;
+
+	if (!early_pci_allowed())
+		return;
+
+	/* Poor man's PCI discovery, the only thing we can do at early boot */
+	for (num = 0; num < 32; num++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				u32 class = read_pci_config(num,slot,func,
+							PCI_CLASS_REVISION);
+				if ((class == 0xffffffff))
+					continue; /* No device at this func */
+
+				if (class>>8 != PCI_CLASS_SERIAL_FIREWIRE_OHCI)
+					continue; /* Not an OHCI-1394 device */
+
+				init_ohci1394_controller(num, slot, func);
+				break; /* Assume one controller per device */
+			}
+		}
+	}
+	printk(KERN_INFO "init_ohci1394_dma: finished initializing OHCI DMA\n");
+}
+
+/**
+ * setup_init_ohci1394_early - enables early OHCI1394 DMA initialization
+ */
+static int __init setup_ohci1394_dma(char *opt)
+{
+	if (!strcmp(opt, "early"))
+		init_ohci1394_dma_early = 1;
+	return 0;
+}
+
+/* passing ohci1394_dma=early on boot causes early OHCI1394 DMA initialization */
+early_param("ohci1394_dma", setup_ohci1394_dma);
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index 8991ab0b4fe..61cff8374e6 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -39,6 +39,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -62,8 +63,10 @@ static irqreturn_t pc110pad_interrupt(int irq, void *ptr)
 	int value     = inb_p(pc110pad_io);
 	int handshake = inb_p(pc110pad_io + 2);
 
-	outb_p(handshake |  1, pc110pad_io + 2);
-	outb_p(handshake & ~1, pc110pad_io + 2);
+	outb(handshake |  1, pc110pad_io + 2);
+	udelay(2);
+	outb(handshake & ~1, pc110pad_io + 2);
+	udelay(2);
 	inb_p(0x64);
 
 	pc110pad_data[pc110pad_count++] = value;
diff --git a/drivers/kvm/svm.c b/drivers/kvm/svm.c
index 4e04e49a2f1..ced4ac1955d 100644
--- a/drivers/kvm/svm.c
+++ b/drivers/kvm/svm.c
@@ -290,7 +290,7 @@ static void svm_hardware_enable(void *garbage)
 #ifdef CONFIG_X86_64
 	struct desc_ptr gdt_descr;
 #else
-	struct Xgt_desc_struct gdt_descr;
+	struct desc_ptr gdt_descr;
 #endif
 	struct desc_struct *gdt;
 	int me = raw_smp_processor_id();
diff --git a/drivers/kvm/vmx.c b/drivers/kvm/vmx.c
index bb56ae3f89b..5b397b6c9f9 100644
--- a/drivers/kvm/vmx.c
+++ b/drivers/kvm/vmx.c
@@ -524,7 +524,7 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
 	if (vcpu->rmode.active)
-		rflags |= IOPL_MASK | X86_EFLAGS_VM;
+		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 	vmcs_writel(GUEST_RFLAGS, rflags);
 }
 
@@ -1050,7 +1050,7 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	vmcs_write32(GUEST_TR_AR_BYTES, vcpu->rmode.tr.ar);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
-	flags &= ~(IOPL_MASK | X86_EFLAGS_VM);
+	flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
 	flags |= (vcpu->rmode.save_iopl << IOPL_SHIFT);
 	vmcs_writel(GUEST_RFLAGS, flags);
 
@@ -1107,9 +1107,9 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
-	vcpu->rmode.save_iopl = (flags & IOPL_MASK) >> IOPL_SHIFT;
+	vcpu->rmode.save_iopl = (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
 
-	flags |= IOPL_MASK | X86_EFLAGS_VM;
+	flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 
 	vmcs_writel(GUEST_RFLAGS, flags);
 	vmcs_writel(GUEST_CR4, vmcs_readl(GUEST_CR4) | X86_CR4_VME);
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 96d0fd07c57..44adb00e149 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -94,7 +94,7 @@ static void copy_in_guest_info(struct lguest *lg, struct lguest_pages *pages)
 	/* Set up the two "TSS" members which tell the CPU what stack to use
 	 * for traps which do directly into the Guest (ie. traps at privilege
 	 * level 1). */
-	pages->state.guest_tss.esp1 = lg->esp1;
+	pages->state.guest_tss.sp1 = lg->esp1;
 	pages->state.guest_tss.ss1 = lg->ss1;
 
 	/* Copy direct-to-Guest trap entries. */
@@ -416,7 +416,7 @@ void __init lguest_arch_host_init(void)
 		/* We know where we want the stack to be when the Guest enters
 		 * the switcher: in pages->regs.  The stack grows upwards, so
 		 * we start it at the end of that structure. */
-		state->guest_tss.esp0 = (long)(&pages->regs + 1);
+		state->guest_tss.sp0 = (long)(&pages->regs + 1);
 		/* And this is the GDT entry to use for the stack: we keep a
 		 * couple of special LGUEST entries. */
 		state->guest_tss.ss0 = LGUEST_DS;
diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c
index 5dba68fe33f..a8364d81522 100644
--- a/drivers/pnp/pnpbios/bioscalls.c
+++ b/drivers/pnp/pnpbios/bioscalls.c
@@ -61,7 +61,7 @@ set_base(gdt[(selname) >> 3], (u32)(address)); \
 set_limit(gdt[(selname) >> 3], size); \
 } while(0)
 
-static struct desc_struct bad_bios_desc = { 0, 0x00409200 };
+static struct desc_struct bad_bios_desc;
 
 /*
  * At some point we want to use this stack frame pointer to unwind
@@ -477,6 +477,9 @@ void pnpbios_calls_init(union pnp_bios_install_struct *header)
 	pnp_bios_callpoint.offset = header->fields.pm16offset;
 	pnp_bios_callpoint.segment = PNP_CS16;
 
+	bad_bios_desc.a = 0;
+	bad_bios_desc.b = 0x00409200;
+
 	set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
 	_set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
 	for (i = 0; i < NR_CPUS; i++) {
diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/vermilion/vermilion.c
index c31f549ebea..1c656667b93 100644
--- a/drivers/video/vermilion/vermilion.c
+++ b/drivers/video/vermilion/vermilion.c
@@ -88,9 +88,7 @@ static int vmlfb_alloc_vram_area(struct vram_area *va, unsigned max_order,
 {
 	gfp_t flags;
 	unsigned long i;
-	pgprot_t wc_pageprot;
 
-	wc_pageprot = PAGE_KERNEL_NOCACHE;
 	max_order++;
 	do {
 		/*
@@ -126,14 +124,8 @@ static int vmlfb_alloc_vram_area(struct vram_area *va, unsigned max_order,
 	/*
 	 * Change caching policy of the linear kernel map to avoid
 	 * mapping type conflicts with user-space mappings.
-	 * The first global_flush_tlb() is really only there to do a global
-	 * wbinvd().
 	 */
-
-	global_flush_tlb();
-	change_page_attr(virt_to_page(va->logical), va->size >> PAGE_SHIFT,
-			 wc_pageprot);
-	global_flush_tlb();
+	set_pages_uc(virt_to_page(va->logical), va->size >> PAGE_SHIFT);
 
 	printk(KERN_DEBUG MODULE_NAME
 	       ": Allocated %ld bytes vram area at 0x%08lx\n",
@@ -157,9 +149,8 @@ static void vmlfb_free_vram_area(struct vram_area *va)
 		 * Reset the linear kernel map caching policy.
 		 */
 
-		change_page_attr(virt_to_page(va->logical),
-				 va->size >> PAGE_SHIFT, PAGE_KERNEL);
-		global_flush_tlb();
+		set_pages_wb(virt_to_page(va->logical),
+				 va->size >> PAGE_SHIFT);
 
 		/*
 		 * Decrease the usage count on the pages we've used