aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@vyatta.com>2008-05-14 17:04:17 -0700
committerJeff Garzik <jgarzik@redhat.com>2008-05-30 22:19:17 -0400
commita068c0adf2fe28b324bca87f85d27af7f993cdaf (patch)
tree0c7685f8061825641d153abd738222ca05f52fac /drivers
parentdb99b98885e717454feef1c6868b27d3f23c2e7c (diff)
sky2: pci power savings
Turn on special bits to save more power when device is shutdown. Tested on a limited range of hardware, some of the bits are for hardware that probably isn't even in production (like Yukon Supreme) and was ported from the vendor driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/sky2.c98
-rw-r--r--drivers/net/sky2.h16
2 files changed, 107 insertions, 7 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 59cb9cd00ad..c83406f4f2a 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -284,6 +284,86 @@ static void sky2_power_aux(struct sky2_hw *hw)
PC_VAUX_ON | PC_VCC_OFF));
}
+static void sky2_power_state(struct sky2_hw *hw, pci_power_t state)
+{
+ u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
+ int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP);
+ u32 reg;
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
+ switch (state) {
+ case PCI_D0:
+ break;
+
+ case PCI_D1:
+ power_control |= 1;
+ break;
+
+ case PCI_D2:
+ power_control |= 2;
+ break;
+
+ case PCI_D3hot:
+ case PCI_D3cold:
+ power_control |= 3;
+ if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
+ /* additional power saving measurements */
+ reg = sky2_pci_read32(hw, PCI_DEV_REG4);
+
+ /* set gating core clock for LTSSM in L1 state */
+ reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) |
+ /* auto clock gated scheme controlled by CLKREQ */
+ P_ASPM_A1_MODE_SELECT |
+ /* enable Gate Root Core Clock */
+ P_CLK_GATE_ROOT_COR_ENA;
+
+ if (pex && (hw->flags & SKY2_HW_CLK_POWER)) {
+ /* enable Clock Power Management (CLKREQ) */
+ u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL);
+
+ ctrl |= PCI_EXP_DEVCTL_AUX_PME;
+ sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl);
+ } else
+ /* force CLKREQ Enable in Our4 (A1b only) */
+ reg |= P_ASPM_FORCE_CLKREQ_ENA;
+
+ /* set Mask Register for Release/Gate Clock */
+ sky2_pci_write32(hw, PCI_DEV_REG5,
+ P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST |
+ P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE |
+ P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN);
+ } else
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT);
+
+ /* put CPU into reset state */
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET);
+ if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0)
+ /* put CPU into halt state */
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED);
+
+ if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) {
+ reg = sky2_pci_read32(hw, PCI_DEV_REG1);
+ /* force to PCIe L1 */
+ reg |= PCI_FORCE_PEX_L1;
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg);
+ }
+ break;
+
+ default:
+ dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ",
+ state);
+ return;
+ }
+
+ power_control |= PCI_PM_CTRL_PME_ENABLE;
+ /* Finally, set the new power state. */
+ sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ sky2_pci_read32(hw, B0_CTST);
+}
+
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
{
u16 reg;
@@ -2786,6 +2866,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_NEWER_PHY
| SKY2_HW_ADV_POWER_CTL;
+
+ /* check for Rev. A1 dev 4200 */
+ if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0)
+ hw->flags |= SKY2_HW_CLK_POWER;
break;
case CHIP_ID_YUKON_EX:
@@ -2836,6 +2920,11 @@ static int __devinit sky2_init(struct sky2_hw *hw)
if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
hw->flags |= SKY2_HW_FIBRE_PHY;
+ hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM);
+ if (hw->pm_cap == 0) {
+ dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n");
+ return -EIO;
+ }
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
@@ -4407,7 +4496,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ sky2_power_state(hw, pci_choose_state(pdev, state));
return 0;
}
@@ -4420,9 +4509,7 @@ static int sky2_resume(struct pci_dev *pdev)
if (!hw)
return 0;
- err = pci_set_power_state(pdev, PCI_D0);
- if (err)
- goto out;
+ sky2_power_state(hw, PCI_D0);
err = pci_restore_state(pdev);
if (err)
@@ -4490,8 +4577,7 @@ static void sky2_shutdown(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3cold, wol);
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
+ sky2_power_state(hw, PCI_D3hot);
}
static struct pci_driver sky2_driver = {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index d63106cd74b..1fa82bf029d 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -28,6 +28,11 @@ enum pci_dev_reg_1 {
PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */
PCI_Y2_PME_LEGACY= 1<<15, /* PCI Express legacy power management mode */
+
+ PCI_PHY_LNK_TIM_MSK= 3L<<8,/* Bit 9.. 8: GPHY Link Trigger Timer */
+ PCI_ENA_L1_EVENT = 1<<7, /* Enable PEX L1 Event */
+ PCI_ENA_GPHY_LNK = 1<<6, /* Enable PEX L1 on GPHY Link down */
+ PCI_FORCE_PEX_L1 = 1<<5, /* Force to PEX L1 */
};
enum pci_dev_reg_2 {
@@ -45,7 +50,11 @@ enum pci_dev_reg_2 {
/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
enum pci_dev_reg_4 {
- /* (Link Training & Status State Machine) */
+ /* (Link Training & Status State Machine) */
+ P_PEX_LTSSM_STAT_MSK = 0x7fL<<25, /* Bit 31..25: PEX LTSSM Mask */
+#define P_PEX_LTSSM_STAT(x) ((x << 25) & P_PEX_LTSSM_STAT_MSK)
+ P_PEX_LTSSM_L1_STAT = 0x34,
+ P_PEX_LTSSM_DET_STAT = 0x01,
P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
/* (Active State Power Management) */
P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
@@ -454,6 +463,9 @@ enum yukon_ex_rev {
CHIP_REV_YU_EX_A0 = 1,
CHIP_REV_YU_EX_B0 = 2,
};
+enum yukon_supr_rev {
+ CHIP_REV_YU_SU_A0 = 0,
+};
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
@@ -2059,7 +2071,9 @@ struct sky2_hw {
#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */
#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
+#define SKY2_HW_CLK_POWER 0x00000100 /* clock power management */
+ int pm_cap;
u8 chip_id;
u8 chip_rev;
u8 pmd_type;