diff options
| author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-09-15 17:35:57 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-09-15 17:35:57 -0700 |
| commit | d0174640eedc1cd756754f03afe2dbb3d56de74e (patch) | |
| tree | 57d9911c28da12b05bc78a2f53dab349479fe37b /drivers | |
| parent | bb8bd3a52a5dbca8bea31bfc72dacfb384170e69 (diff) | |
| parent | fadacb1b80e35e0b36a90d43e21ef91eec4b889b (diff) | |
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo
sk98lin: resurrect driver
ucc_geth: fix compilation
mv643xx_eth: Fix tx_bytes stats calculation
As struct iw_point is bi-directional payload, we should copy back the content
[PATCH] bcm43xx: Fix cancellation of work queue crashes
spidernet: fix interrupt reason recognition
ehea: fix last_rx update
ehea: propagate physical port state
Fix a lock problem in generic phy code
sky2: restore multicast list on resume and other ops
atl1: disable broken 64-bit DMA
Diffstat (limited to 'drivers')
55 files changed, 41464 insertions, 42 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5b9e17bf174..c5519250efd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2177,7 +2177,7 @@ config SKGE with better performance and more complete ethtool support. It does not support the link failover and network management - features available in the hardware. + features that "portable" vendor supplied sk98lin driver does. This driver supports adapters based on the original Yukon chipset: Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, @@ -2215,6 +2215,93 @@ config SKY2_DEBUG If unsure, say N. +config SK98LIN + tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" + depends on PCI + ---help--- + Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx + compliant Gigabit Ethernet Adapter. + + This driver supports the original Yukon chipset. This driver is + deprecated and will be removed from the kernel in the near future, + it has been replaced by the skge driver. skge is cleaner and + seems to work better. + + This driver does not support the newer Yukon2 chipset. A separate + driver, sky2, is provided to support Yukon2-based adapters. + + The following adapters are supported by this driver: + - 3Com 3C940 Gigabit LOM Ethernet Adapter + - 3Com 3C941 Gigabit LOM Ethernet Adapter + - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971T Gigabit Ethernet Adapter + - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 + - EG1032 v2 Instant Gigabit Network Adapter + - EG1064 v2 Instant Gigabit Network Adapter + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) + - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) + - Marvell RDK-8001 Adapter + - Marvell RDK-8002 Adapter + - Marvell RDK-8003 Adapter + - Marvell RDK-8004 Adapter + - Marvell RDK-8006 Adapter + - Marvell RDK-8007 Adapter + - Marvell RDK-8008 Adapter + - Marvell RDK-8009 Adapter + - Marvell RDK-8010 Adapter + - Marvell RDK-8011 Adapter + - Marvell RDK-8012 Adapter + - Marvell RDK-8052 Adapter + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) + - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) + - SK-9521 10/100/1000Base-T Adapter + - SK-9521 V2.0 10/100/1000Base-T Adapter + - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) + - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter + - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) + - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) + - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter + - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) + - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) + - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) + - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) + - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) + - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) + - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter + - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) + - SMC EZ Card 1000 (SMC9452TXV.2) + + The adapters support Jumbo Frames. + The dual link adapters support link-failover and dual port features. + Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support + the scatter-gather functionality with sendfile(). Please refer to + <file:Documentation/networking/sk98lin.txt> for more information about + optional driver parameters. + Questions concerning this driver may be addressed to: + <linux@syskonnect.de> + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/kbuild/modules.txt>. The module will + be called sk98lin. This is recommended. + config VIA_VELOCITY tristate "VIA Velocity support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e684212fd8e..9c928a84584 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -66,6 +66,7 @@ ps3_gelic-objs += ps3_gelic_net.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o +obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c index 3c1984ecf36..f23e13c8f9a 100644 --- a/drivers/net/atl1/atl1_main.c +++ b/drivers/net/atl1/atl1_main.c @@ -2203,21 +2203,20 @@ static int __devinit atl1_probe(struct pci_dev *pdev, struct net_device *netdev; struct atl1_adapter *adapter; static int cards_found = 0; - bool pci_using_64 = true; int err; err = pci_enable_device(pdev); if (err) return err; - err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + /* + * 64-bit DMA currently has data corruption problems, so let's just + * use 32-bit DMA for now. This is a big hack that is probably wrong. + */ + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto err_dma; - } - pci_using_64 = false; + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_dma; } /* Mark all PCI regions associated with PCI device * pdev as being reserved by owner atl1_driver_name @@ -2282,7 +2281,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev, netdev->ethtool_ops = &atl1_ethtool_ops; adapter->bd_number = cards_found; - adapter->pci_using_64 = pci_using_64; /* setup the private structure */ err = atl1_sw_init(adapter); @@ -2299,9 +2297,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev, */ /* netdev->features |= NETIF_F_TSO; */ - if (pci_using_64) - netdev->features |= NETIF_F_HIGHDMA; - netdev->features |= NETIF_F_LLTX; /* diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index d67f97bfa3a..8d58be56f4e 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -39,7 +39,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0073" +#define DRV_VERSION "EHEA_0074" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -402,6 +402,8 @@ struct ehea_mc_list { #define EHEA_PORT_UP 1 #define EHEA_PORT_DOWN 0 +#define EHEA_PHY_LINK_UP 1 +#define EHEA_PHY_LINK_DOWN 0 #define EHEA_MAX_PORT_RES 16 struct ehea_port { struct ehea_adapter *adapter; /* adapter that owns this port */ @@ -427,6 +429,7 @@ struct ehea_port { u32 msg_enable; u32 sig_comp_iv; u32 state; + u8 phy_link; u8 full_duplex; u8 autoneg; u8 num_def_qps; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index db5747490a0..717b12984d1 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -53,17 +53,21 @@ static int rq3_entries = EHEA_DEF_ENTRIES_RQ3; static int sq_entries = EHEA_DEF_ENTRIES_SQ; static int use_mcs = 0; static int num_tx_qps = EHEA_NUM_TX_QP; +static int prop_carrier_state = 0; module_param(msg_level, int, 0); module_param(rq1_entries, int, 0); module_param(rq2_entries, int, 0); module_param(rq3_entries, int, 0); module_param(sq_entries, int, 0); +module_param(prop_carrier_state, int, 0); module_param(use_mcs, int, 0); module_param(num_tx_qps, int, 0); MODULE_PARM_DESC(num_tx_qps, "Number of TX-QPS"); MODULE_PARM_DESC(msg_level, "msg_level"); +MODULE_PARM_DESC(prop_carrier_state, "Propagate carrier state of physical " + "port to stack. 1:yes, 0:no. Default = 0 "); MODULE_PARM_DESC(rq3_entries, "Number of entries for Receive Queue 3 " "[2^x - 1], x = [6..14]. Default = " __MODULE_STRING(EHEA_DEF_ENTRIES_RQ3) ")"); @@ -467,7 +471,7 @@ static struct ehea_cqe *ehea_proc_rwqes(struct net_device *dev, else netif_receive_skb(skb); - dev->last_rx = jiffies; + port->netdev->last_rx = jiffies; } else { pr->p_stats.poll_receive_errors++; port_reset = ehea_treat_poll_error(pr, rq, cqe, @@ -814,7 +818,9 @@ int ehea_set_portspeed(struct ehea_port *port, u32 port_speed) ehea_error("Failed setting port speed"); } } - netif_carrier_on(port->netdev); + if (!prop_carrier_state || (port->phy_link == EHEA_PHY_LINK_UP)) + netif_carrier_on(port->netdev); + kfree(cb4); out: return ret; @@ -869,13 +875,19 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe) } if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PORT_UP, eqe)) { + port->phy_link = EHEA_PHY_LINK_UP; if (netif_msg_link(port)) ehea_info("%s: Physical port up", port->netdev->name); + if (prop_carrier_state) + netif_carrier_on(port->netdev); } else { + port->phy_link = EHEA_PHY_LINK_DOWN; if (netif_msg_link(port)) ehea_info("%s: Physical port down", port->netdev->name); + if (prop_carrier_state) + netif_carrier_off(port->netdev); } if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PRIMARY, eqe)) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 1799eee88db..6a117e9968c 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1222,7 +1222,7 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&mp->lock, flags); eth_tx_submit_descs_for_skb(mp, skb); - stats->tx_bytes = skb->len; + stats->tx_bytes += skb->len; stats->tx_packets++; dev->trans_start = jiffies; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 503f2685fb7..c06cae3f0b5 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -116,7 +116,7 @@ struct el3_private { spinlock_t lock; }; -static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; +static const char *if_names[] = { "auto", "10base2", "10baseT", "AUI" }; /*====================================================================*/ diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index e323efd4ed1..0cc4369cacb 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -755,7 +755,7 @@ out_unlock: */ void phy_start(struct phy_device *phydev) { - spin_lock(&phydev->lock); + spin_lock_bh(&phydev->lock); switch (phydev->state) { case PHY_STARTING: @@ -769,7 +769,7 @@ void phy_start(struct phy_device *phydev) default: break; } - spin_unlock(&phydev->lock); + spin_unlock_bh(&phydev->lock); } EXPORT_SYMBOL(phy_stop); EXPORT_SYMBOL(phy_start); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e275df8c55b..49328e05050 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -644,7 +644,7 @@ static int phy_probe(struct device *dev) if (!(phydrv->flags & PHY_HAS_INTERRUPT)) phydev->irq = PHY_POLL; - spin_lock(&phydev->lock); + spin_lock_bh(&phydev->lock); /* Start out supporting everything. Eventually, * a controller will attach, and may modify one @@ -658,7 +658,7 @@ static int phy_probe(struct device *dev) if (phydev->drv->probe) err = phydev->drv->probe(phydev); - spin_unlock(&phydev->lock); + spin_unlock_bh(&phydev->lock); return err; diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile new file mode 100644 index 00000000000..afd900d5d73 --- /dev/null +++ b/drivers/net/sk98lin/Makefile @@ -0,0 +1,87 @@ +# +# Makefile for the SysKonnect SK-98xx device driver. +# + + +# +# Standalone driver params +# SKPARAM += -DSK_KERNEL_24 +# SKPARAM += -DSK_KERNEL_24_26 +# SKPARAM += -DSK_KERNEL_26 +# SKPARAM += -DSK_KERNEL_22_24 + +obj-$(CONFIG_SK98LIN) += sk98lin.o +sk98lin-objs := \ + skge.o \ + skethtool.o \ + skdim.o \ + skaddr.o \ + skgehwt.o \ + skgeinit.o \ + skgepnmi.o \ + skgesirq.o \ + ski2c.o \ + sklm80.o \ + skqueue.o \ + skrlmt.o \ + sktimer.o \ + skvpd.o \ + skxmac2.o + +# DBGDEF = \ +# -DDEBUG + +ifdef DEBUG +DBGDEF += \ +-DSK_DEBUG_CHKMOD=0x00000000L \ +-DSK_DEBUG_CHKCAT=0x00000000L +endif + + +# **** possible debug modules for SK_DEBUG_CHKMOD ***************** +# SK_DBGMOD_MERR 0x00000001L /* general module error indication */ +# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ +# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ +# SK_DBGMOD_VPD 0x00000008L /* VPD module */ +# SK_DBGMOD_I2C 0x00000010L /* I2C module */ +# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ +# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ +# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ +# SK_DBGMOD_DRV 0x00010000L /* DRV module */ + +# **** possible debug categories for SK_DEBUG_CHKCAT ************** +# *** common modules *** +# SK_DBGCAT_INIT 0x00000001L module/driver initialization +# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL) +# SK_DBGCAT_ERR 0x00000004L error handling paths +# SK_DBGCAT_TX 0x00000008L transmit path +# SK_DBGCAT_RX 0x00000010L receive path +# SK_DBGCAT_IRQ 0x00000020L general IRQ handling +# SK_DBGCAT_QUEUE 0x00000040L any queue management +# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump +# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump + +# *** driver (file skge.c) *** +# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points +# SK_DBGCAT_DRV_??? 0x00020000 not used +# SK_DBGCAT_DRV_MCA 0x00040000 multicast +# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path +# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path +# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime +# SK_DBGCAT_DRV_??? 0x00400000 not used +# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode +# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames +# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions +# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources +# SK_DBGCAT_DRV_EVENT 0x08000000 driver events + +EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) + +clean: + rm -f core *.o *.a *.s + + + + + + diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h new file mode 100644 index 00000000000..4e2dbbf7800 --- /dev/null +++ b/drivers/net/sk98lin/h/lm80.h @@ -0,0 +1,179 @@ +/****************************************************************************** + * + * Name: lm80.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.6 $ + * Date: $Date: 2003/05/13 17:26:52 $ + * Purpose: Contains all defines for the LM80 Chip + * (National Semiconductor). + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_LM80_H +#define __INC_LM80_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* + * LM80 register definition + * + * All registers are 8 bit wide + */ +#define LM80_CFG 0x00 /* Configuration Register */ +#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */ +#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */ +#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */ +#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */ +#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */ +#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */ + /* 0x07 - 0x1f reserved */ + /* current values */ +#define LM80_VT0_IN 0x20 /* current Voltage 0 value */ +#define LM80_VT1_IN 0x21 /* current Voltage 1 value */ +#define LM80_VT2_IN 0x22 /* current Voltage 2 value */ +#define LM80_VT3_IN 0x23 /* current Voltage 3 value */ +#define LM80_VT4_IN 0x24 /* current Voltage 4 value */ +#define LM80_VT5_IN 0x25 /* current Voltage 5 value */ +#define LM80_VT6_IN 0x26 /* current Voltage 6 value */ +#define LM80_TEMP_IN 0x27 /* current Temperature value */ +#define LM80_FAN1_IN 0x28 /* current Fan 1 count */ +#define LM80_FAN2_IN 0x29 /* current Fan 2 count */ + /* limit values */ +#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */ +#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */ +#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */ +#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */ +#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */ +#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */ +#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */ +#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */ +#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */ +#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */ +#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */ +#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */ +#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */ +#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */ +#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */ +#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */ +#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */ +#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */ +#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */ +#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */ + /* 0x3e - 0x3f reserved */ + +/* + * LM80 bit definitions + */ + +/* LM80_CFG Configuration Register */ +#define LM80_CFG_START (1<<0) /* start monitoring operation */ +#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */ +#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */ +#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */ +#define LM80_CFG_RESET (1<<4) /* signals a reset */ +#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */ +#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */ +#define LM80_CFG_INIT (1<<7) /* restore power on defaults */ + +/* LM80_ISRC_1 Interrupt Status Register 1 */ +/* LM80_IMSK_1 Interrupt Mask Register 1 */ +#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */ +#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */ +#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */ +#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */ +#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */ +#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */ +#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */ +#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */ + +/* LM80_ISRC_2 Interrupt Status Register 2 */ +/* LM80_IMSK_2 Interrupt Mask Register 2 */ +#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */ +#define LM80_IS_BTI (1<<1) /* state of BTI# pin */ +#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */ +#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */ +#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */ +#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */ + /* bit 6 and 7 are reserved in LM80_ISRC_2 */ +#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */ +#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */ + +/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */ +#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */ +#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */ +#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */ +#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */ +#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/ +#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */ + +/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */ +#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */ +#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */ +#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */ +#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/ +#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */ +#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */ + + /* 0x07 - 0x1f reserved */ +/* LM80_VT0_IN current Voltage 0 value */ +/* LM80_VT1_IN current Voltage 1 value */ +/* LM80_VT2_IN current Voltage 2 value */ +/* LM80_VT3_IN current Voltage 3 value */ +/* LM80_VT4_IN current Voltage 4 value */ +/* LM80_VT5_IN current Voltage 5 value */ +/* LM80_VT6_IN current Voltage 6 value */ +/* LM80_TEMP_IN current temperature value */ +/* LM80_FAN1_IN current Fan 1 count */ +/* LM80_FAN2_IN current Fan 2 count */ +/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */ +/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */ +/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */ +/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */ +/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */ +/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */ +/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */ +/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */ +/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */ +/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */ +/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */ +/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */ +/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */ +/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */ +/* LM80_THOT_LIM_UP hot temperature limit (high) */ +/* LM80_THOT_LIM_LO hot temperature limit (low) */ +/* LM80_TOS_LIM_UP OS temperature limit (high) */ +/* LM80_TOS_LIM_LO OS temperature limit (low) */ +/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */ +/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */ + /* 0x3e - 0x3f reserved */ + +#define LM80_ADDR 0x28 /* LM80 default addr */ + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_LM80_H */ diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h new file mode 100644 index 00000000000..423ad063d09 --- /dev/null +++ b/drivers/net/sk98lin/h/skaddr.h @@ -0,0 +1,285 @@ +/****************************************************************************** + * + * Name: skaddr.h + * Project: Gigabit Ethernet Adapters, ADDR-Modul + * Version: $Revision: 1.29 $ + * Date: $Date: 2003/05/13 16:57:24 $ + * Purpose: Header file for Address Management (MC, UC, Prom). + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage multicast addresses and promiscuous mode + * on GEnesis adapters. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * ... + * "sktypes.h" + * "skqueue.h" + * "skaddr.h" + * ... + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef __INC_SKADDR_H +#define __INC_SKADDR_H + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +/* defines ********************************************************************/ + +#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */ +#define SK_MAX_ADDRS 14 /* #Addrs for exact match. */ + +/* ----- Common return values ----- */ + +#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */ +#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */ +#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */ + +/* ----- Clear/Add flag bits ----- */ + +#define SK_ADDR_PERMANENT 1 /* RLMT Address */ + +/* ----- Additional Clear flag bits ----- */ + +#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. */ + +/* ----- Override flag bits ----- */ + +#define SK_ADDR_LOGICAL_ADDRESS 0 +#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */ +#define SK_ADDR_PHYSICAL_ADDRESS 1 +#define SK_ADDR_CLEAR_LOGICAL 2 +#define SK_ADDR_SET_LOGICAL 4 + +/* ----- Override return values ----- */ + +#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS) +#define SK_ADDR_DUPLICATE_ADDRESS 1 +#define SK_ADDR_MULTICAST_ADDRESS 2 + +/* ----- Partitioning of excact match table ----- */ + +#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */ + +#define SK_ADDR_FIRST_MATCH_RLMT 1 +#define SK_ADDR_LAST_MATCH_RLMT 2 +#define SK_ADDR_FIRST_MATCH_DRV 3 +#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1) + +/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */ + +#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */ +#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. */ + +/* ----- Additional SkAddrMcAdd return values ----- */ + +#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */ +#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */ +#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. */ + +/* Promiscuous mode bits ----- */ + +#define SK_PROM_MODE_NONE 0 /* Normal receive. */ +#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */ +#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. */ +/* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. */ + +/* Macros */ + +#ifdef OLD_STUFF +#ifndef SK_ADDR_EQUAL +/* + * "&" instead of "&&" allows better optimization on IA-64. + * The replacement is safe here, as all bytes exist. + */ +#ifndef SK_ADDR_DWORD_COMPARE +#define SK_ADDR_EQUAL(A1,A2) ( \ + (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \ + (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \ + (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \ + (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \ + (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \ + (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0])) +#else /* SK_ADDR_DWORD_COMPARE */ +#define SK_ADDR_EQUAL(A1,A2) ( \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0]))) +#endif /* SK_ADDR_DWORD_COMPARE */ +#endif /* SK_ADDR_EQUAL */ +#endif /* 0 */ + +#ifndef SK_ADDR_EQUAL +#ifndef SK_ADDR_DWORD_COMPARE +#define SK_ADDR_EQUAL(A1,A2) ( \ + (((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \ + (((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \ + (((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \ + (((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \ + (((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \ + (((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0])) +#else /* SK_ADDR_DWORD_COMPARE */ +#define SK_ADDR_EQUAL(A1,A2) ( \ + (*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \ + *(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \ + (*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \ + *(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0]))) +#endif /* SK_ADDR_DWORD_COMPARE */ +#endif /* SK_ADDR_EQUAL */ + +/* typedefs *******************************************************************/ + +typedef struct s_MacAddr { + SK_U8 a[SK_MAC_ADDR_LEN]; +} SK_MAC_ADDR; + + +/* SK_FILTER is used to ensure alignment of the filter. */ +typedef union s_InexactFilter { + SK_U8 Bytes[8]; + SK_U64 Val; /* Dummy entry for alignment only. */ +} SK_FILTER64; + + +typedef struct s_AddrNet SK_ADDR_NET; + + +typedef struct s_AddrPort { + +/* ----- Public part (read-only) ----- */ + + SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */ + SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */ + int PromMode; /* Promiscuous Mode. */ + +/* ----- Private part ----- */ + + SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */ + SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ + SK_U8 Align01; + + SK_U32 FirstExactMatchRlmt; + SK_U32 NextExactMatchRlmt; + SK_U32 FirstExactMatchDrv; + SK_U32 NextExactMatchDrv; + SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES]; + SK_FILTER64 InexactFilter; /* For 64-bit hash register. */ + SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */ + SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */ +} SK_ADDR_PORT; + + +struct s_AddrNet { +/* ----- Public part (read-only) ----- */ + + SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */ + SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */ + +/* ----- Private part ----- */ + + SK_U32 ActivePort; /* View of module ADDR. */ + SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ + SK_U8 Align01; + SK_U16 Align02; +}; + + +typedef struct s_Addr { + +/* ----- Public part (read-only) ----- */ + + SK_ADDR_NET Net[SK_MAX_NETS]; + SK_ADDR_PORT Port[SK_MAX_MACS]; + +/* ----- Private part ----- */ +} SK_ADDR; + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO + +/* Functions provided by SkAddr */ + +/* ANSI/C++ compliant function prototypes */ + +extern int SkAddrInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern int SkAddrMcClear( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int Flags); + +extern int SkAddrMcAdd( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR *pMc, + int Flags); + +extern int SkAddrMcUpdate( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber); + +extern int SkAddrOverride( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR SK_FAR *pNewAddr, + int Flags); + +extern int SkAddrPromiscuousChange( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int NewPromMode); + +#ifndef SK_SLIM +extern int SkAddrSwap( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 FromPortNumber, + SK_U32 ToPortNumber); +#endif + +#else /* defined(SK_KR_PROTO)) */ + +/* Non-ANSI/C++ compliant function prototypes */ + +#error KR-style prototypes are not yet provided. + +#endif /* defined(SK_KR_PROTO)) */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKADDR_H */ diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h new file mode 100644 index 00000000000..6e256bd9a28 --- /dev/null +++ b/drivers/net/sk98lin/h/skcsum.h @@ -0,0 +1,213 @@ +/****************************************************************************** + * + * Name: skcsum.h + * Project: GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx) + * Version: $Revision: 1.10 $ + * Date: $Date: 2003/08/20 13:59:57 $ + * Purpose: Store/verify Internet checksum in send/receive packets. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * Public header file for the "GEnesis" common module "CSUM". + * + * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon" + * and is the code name of this SysKonnect project. + * + * Compilation Options: + * + * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an + * empty module. + * + * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id + * definitions. In this case, all SKCS_PROTO_xxx definitions must be made + * external. + * + * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status + * definitions. In this case, all SKCS_STATUS_xxx definitions must be made + * external. + * + * Include File Hierarchy: + * + * "h/skcsum.h" + * "h/sktypes.h" + * "h/skqueue.h" + * + ******************************************************************************/ + +#ifndef __INC_SKCSUM_H +#define __INC_SKCSUM_H + +#include "h/sktypes.h" +#include "h/skqueue.h" + +/* defines ********************************************************************/ + +/* + * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags' if no user + * overwrite. + */ +#ifndef SKCS_OVERWRITE_PROTO /* User overwrite? */ +#define SKCS_PROTO_IP 0x1 /* IP (Internet Protocol version 4) */ +#define SKCS_PROTO_TCP 0x2 /* TCP (Transmission Control Protocol) */ +#define SKCS_PROTO_UDP 0x4 /* UDP (User Datagram Protocol) */ + +/* Indices for protocol statistics. */ +#define SKCS_PROTO_STATS_IP 0 +#define SKCS_PROTO_STATS_UDP 1 +#define SKCS_PROTO_STATS_TCP 2 +#define SKCS_NUM_PROTOCOLS 3 /* Number of supported protocols. */ +#endif /* !SKCS_OVERWRITE_PROTO */ + +/* + * Define the default SKCS_STATUS type and values if no user overwrite. + * + * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame. + * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error. + * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame. + * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame + * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok). + * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame). + * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok). + * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok). + * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok. + * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok. + * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. + */ +#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */ +#define SKCS_STATUS int /* Define status type. */ + +#define SKCS_STATUS_UNKNOWN_IP_VERSION 1 +#define SKCS_STATUS_IP_CSUM_ERROR 2 +#define SKCS_STATUS_IP_FRAGMENT 3 +#define SKCS_STATUS_IP_CSUM_OK 4 +#define SKCS_STATUS_TCP_CSUM_ERROR 5 +#define SKCS_STATUS_UDP_CSUM_ERROR 6 +#define SKCS_STATUS_TCP_CSUM_OK 7 +#define SKCS_STATUS_UDP_CSUM_OK 8 +/* needed for Microsoft */ +#define SKCS_STATUS_IP_CSUM_ERROR_UDP 9 +#define SKCS_STATUS_IP_CSUM_ERROR_TCP 10 +/* UDP checksum may be omitted */ +#define SKCS_STATUS_IP_CSUM_OK_NO_UDP 11 +#endif /* !SKCS_OVERWRITE_STATUS */ + +/* Clear protocol statistics event. */ +#define SK_CSUM_EVENT_CLEAR_PROTO_STATS 1 + +/* + * Add two values in one's complement. + * + * Note: One of the two input values may be "longer" than 16-bit, but then the + * resulting sum may be 17 bits long. In this case, add zero to the result using + * SKCS_OC_ADD() again. + * + * Result = Value1 + Value2 + */ +#define SKCS_OC_ADD(Result, Value1, Value2) { \ + unsigned long Sum; \ + \ + Sum = (unsigned long) (Value1) + (unsigned long) (Value2); \ + /* Add-in any carry. */ \ + (Result) = (Sum & 0xffff) + (Sum >> 16); \ +} + +/* + * Subtract two values in one's complement. + * + * Result = Value1 - Value2 + */ +#define SKCS_OC_SUB(Result, Value1, Value2) \ + SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff) + +/* typedefs *******************************************************************/ + +/* + * SKCS_PROTO_STATS - The CSUM protocol statistics structure. + * + * There is one instance of this structure for each protocol supported. + */ +typedef struct s_CsProtocolStatistics { + SK_U64 RxOkCts; /* Receive checksum ok. */ + SK_U64 RxUnableCts; /* Unable to verify receive checksum. */ + SK_U64 RxErrCts; /* Receive checksum error. */ + SK_U64 TxOkCts; /* Transmit checksum ok. */ + SK_U64 TxUnableCts; /* Unable to calculate checksum in hw. */ +} SKCS_PROTO_STATS; + +/* + * s_Csum - The CSUM module context structure. + */ +typedef struct s_Csum { + /* Enabled receive SK_PROTO_XXX bit flags. */ + unsigned ReceiveFlags[SK_MAX_NETS]; +#ifdef TX_CSUM + unsigned TransmitFlags[SK_MAX_NETS]; +#endif /* TX_CSUM */ + + /* The protocol statistics structure; one per supported protocol. */ + SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS]; +} SK_CSUM; + +/* + * SKCS_PACKET_INFO - The packet information structure. + */ +typedef struct s_CsPacketInfo { + /* Bit field specifiying the desired/found protocols. */ + unsigned ProtocolFlags; + + /* Length of complete IP header, including any option fields. */ + unsigned IpHeaderLength; + + /* IP header checksum. */ + unsigned IpHeaderChecksum; + + /* TCP/UDP pseudo header checksum. */ + unsigned PseudoHeaderChecksum; +} SKCS_PACKET_INFO; + +/* function prototypes ********************************************************/ + +#ifndef SK_CS_CALCULATE_CHECKSUM +extern unsigned SkCsCalculateChecksum( + void *pData, + unsigned Length); +#endif /* SK_CS_CALCULATE_CHECKSUM */ + +extern int SkCsEvent( + SK_AC *pAc, + SK_IOC Ioc, + SK_U32 Event, + SK_EVPARA Param); + +extern SKCS_STATUS SkCsGetReceiveInfo( + SK_AC *pAc, + void *pIpHeader, + unsigned Checksum1, + unsigned Checksum2, + int NetNumber); + +extern void SkCsSetReceiveFlags( + SK_AC *pAc, + unsigned ReceiveFlags, + unsigned *pChecksum1Offset, + unsigned *pChecksum2Offset, + int NetNumber); + +#endif /* __INC_SKCSUM_H */ diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h new file mode 100644 index 00000000000..3cba171d74b --- /dev/null +++ b/drivers/net/sk98lin/h/skdebug.h @@ -0,0 +1,74 @@ +/****************************************************************************** + * + * Name: skdebug.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.14 $ + * Date: $Date: 2003/05/13 17:26:00 $ + * Purpose: SK specific DEBUG support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKDEBUG_H +#define __INC_SKDEBUG_H + +#ifdef DEBUG +#ifndef SK_DBG_MSG +#define SK_DBG_MSG(pAC,comp,cat,arg) \ + if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \ + ((cat) & SK_DBG_CHKCAT(pAC)) ) { \ + SK_DBG_PRINTF arg ; \ + } +#endif +#else +#define SK_DBG_MSG(pAC,comp,lev,arg) +#endif + +/* PLS NOTE: + * ========= + * Due to any restrictions of kernel printf routines do not use other + * format identifiers as: %x %d %c %s . + * Never use any combined format identifiers such as: %lx %ld in your + * printf - argument (arg) because some OS specific kernel printfs may + * only support some basic identifiers. + */ + +/* Debug modules */ + +#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */ +#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ +#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ +#define SK_DBGMOD_VPD 0x00000008L /* VPD module */ +#define SK_DBGMOD_I2C 0x00000010L /* I2C module */ +#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ +#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ +#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ +#define SK_DBGMOD_PECP 0x00000100L /* PECP module */ +#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */ + +/* Debug events */ + +#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */ +#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */ +#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */ +#define SK_DBGCAT_TX 0x00000008L /* transmit path */ +#define SK_DBGCAT_RX 0x00000010L /* receive path */ +#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */ +#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */ +#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */ +#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */ + +#endif /* __INC_SKDEBUG_H */ diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h new file mode 100644 index 00000000000..91b8d4f4590 --- /dev/null +++ b/drivers/net/sk98lin/h/skdrv1st.h @@ -0,0 +1,188 @@ +/****************************************************************************** + * + * Name: skdrv1st.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.4 $ + * Date: $Date: 2003/11/12 14:28:14 $ + * Purpose: First header file for driver and all other modules + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the first include file of the driver, which includes all + * neccessary system header files and some of the GEnesis header files. + * It also defines some basic items. + * + * Include File Hierarchy: + * + * see skge.c + * + ******************************************************************************/ + +#ifndef __INC_SKDRV1ST_H +#define __INC_SKDRV1ST_H + +typedef struct s_AC SK_AC; + +/* Set card versions */ +#define SK_FAR + +/* override some default functions with optimized linux functions */ + +#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2) +#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4) +#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8) +#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2) +#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),4) +#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),8) + +#define SK_ADDR_EQUAL(a1,a2) (!memcmp(a1,a2,6)) + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/bitops.h> +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <linux/init.h> +#include <asm/uaccess.h> +#include <net/checksum.h> + +#define SK_CS_CALCULATE_CHECKSUM +#ifndef CONFIG_X86_64 +#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff) +#else +#define SkCsCalculateChecksum(p,l) ((~ip_fast_csum(p, l)) & 0xffff) +#endif + +#include "h/sktypes.h" +#include "h/skerror.h" +#include "h/skdebug.h" +#include "h/lm80.h" +#include "h/xmac_ii.h" + +#ifdef __LITTLE_ENDIAN +#define SK_LITTLE_ENDIAN +#else +#define SK_BIG_ENDIAN +#endif + +#define SK_NET_DEVICE net_device + + +/* we use gethrtime(), return unit: nanoseconds */ +#define SK_TICKS_PER_SEC 100 + +#define SK_MEM_MAPPED_IO + +// #define SK_RLMT_SLOW_LOOKAHEAD + +#define SK_MAX_MACS 2 +#define SK_MAX_NETS 2 + +#define SK_IOC char __iomem * + +typedef struct s_DrvRlmtMbuf SK_MBUF; + +#define SK_CONST64 INT64_C +#define SK_CONSTU64 UINT64_C + +#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size) +#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size) +#define SK_MEMSET(dest,val,size) memset(dest,val,size) +#define SK_STRLEN(pStr) strlen((char*)(pStr)) +#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size) +#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2)) + +/* macros to access the adapter */ +#define SK_OUT8(b,a,v) writeb((v), ((b)+(a))) +#define SK_OUT16(b,a,v) writew((v), ((b)+(a))) +#define SK_OUT32(b,a,v) writel((v), ((b)+(a))) +#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a))) +#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a))) +#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a))) + +#define int8_t char +#define int16_t short +#define int32_t long +#define int64_t long long +#define uint8_t u_char +#define uint16_t u_short +#define uint32_t u_long +#define uint64_t unsigned long long +#define t_scalar_t int +#define t_uscalar_t unsigned int +#define uintptr_t unsigned long + +#define __CONCAT__(A,B) A##B + +#define INT32_C(a) __CONCAT__(a,L) +#define INT64_C(a) __CONCAT__(a,LL) +#define UINT32_C(a) __CONCAT__(a,UL) +#define UINT64_C(a) __CONCAT__(a,ULL) + +#ifdef DEBUG +#define SK_DBG_PRINTF printk +#ifndef SK_DEBUG_CHKMOD +#define SK_DEBUG_CHKMOD 0 +#endif +#ifndef SK_DEBUG_CHKCAT +#define SK_DEBUG_CHKCAT 0 +#endif +/* those come from the makefile */ +#define SK_DBG_CHKMOD(pAC) (SK_DEBUG_CHKMOD) +#define SK_DBG_CHKCAT(pAC) (SK_DEBUG_CHKCAT) + +extern void SkDbgPrintf(const char *format,...); + +#define SK_DBGMOD_DRV 0x00010000 + +/**** possible driver debug categories ********************************/ +#define SK_DBGCAT_DRV_ENTRY 0x00010000 +#define SK_DBGCAT_DRV_SAP 0x00020000 +#define SK_DBGCAT_DRV_MCA 0x00040000 +#define SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 +#define SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 +#define SK_DBGCAT_DRV_PROGRESS 0x00200000 +#define SK_DBGCAT_DRV_MSG 0x00400000 +#define SK_DBGCAT_DRV_PROM 0x00800000 +#define SK_DBGCAT_DRV_TX_FRAME 0x01000000 +#define SK_DBGCAT_DRV_ERROR 0x02000000 +#define SK_DBGCAT_DRV_INT_SRC 0x04000000 +#define SK_DBGCAT_DRV_EVENT 0x08000000 + +#endif + +#define SK_ERR_LOG SkErrorLog + +extern void SkErrorLog(SK_AC*, int, int, char*); + +#endif + diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h new file mode 100644 index 00000000000..3fa67171e83 --- /dev/null +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -0,0 +1,447 @@ +/****************************************************************************** + * + * Name: skdrv2nd.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.10 $ + * Date: $Date: 2003/12/11 16:04:45 $ + * Purpose: Second header file for driver and all other modules + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the second include file of the driver, which includes all other + * neccessary files and defines all structures and constants used by the + * driver and the common modules. + * + * Include File Hierarchy: + * + * see skge.c + * + ******************************************************************************/ + +#ifndef __INC_SKDRV2ND_H +#define __INC_SKDRV2ND_H + +#include "h/skqueue.h" +#include "h/skgehwt.h" +#include "h/sktimer.h" +#include "h/ski2c.h" +#include "h/skgepnmi.h" +#include "h/skvpd.h" +#include "h/skgehw.h" +#include "h/skgeinit.h" +#include "h/skaddr.h" +#include "h/skgesirq.h" +#include "h/skcsum.h" +#include "h/skrlmt.h" +#include "h/skgedrv.h" + + +extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned); +extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*); +extern SK_U64 SkOsGetTime(SK_AC*); +extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*); +extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*); +extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*); +extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16); +extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8); +extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA); + +#ifdef SK_DIAG_SUPPORT +extern int SkDrvEnterDiagMode(SK_AC *pAc); +extern int SkDrvLeaveDiagMode(SK_AC *pAc); +#endif + +struct s_DrvRlmtMbuf { + SK_MBUF *pNext; /* Pointer to next RLMT Mbuf. */ + SK_U8 *pData; /* Data buffer (virtually contig.). */ + unsigned Size; /* Data buffer size. */ + unsigned Length; /* Length of packet (<= Size). */ + SK_U32 PortIdx; /* Receiving/transmitting port. */ +#ifdef SK_RLMT_MBUF_PRIVATE + SK_RLMT_MBUF Rlmt; /* Private part for RLMT. */ +#endif /* SK_RLMT_MBUF_PRIVATE */ + struct sk_buff *pOs; /* Pointer to message block */ +}; + + +/* + * Time macros + */ +#if SK_TICKS_PER_SEC == 100 +#define SK_PNMI_HUNDREDS_SEC(t) (t) +#else +#define SK_PNMI_HUNDREDS_SEC(t) ((((unsigned long)t) * 100) / \ + (SK_TICKS_PER_SEC)) +#endif + +/* + * New SkOsGetTime + */ +#define SkOsGetTimeCurrent(pAC, pUsec) {\ + struct timeval t;\ + do_gettimeofday(&t);\ + *pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\ +} + + +/* + * ioctl definitions + */ +#define SK_IOCTL_BASE (SIOCDEVPRIVATE) +#define SK_IOCTL_GETMIB (SK_IOCTL_BASE + 0) +#define SK_IOCTL_SETMIB (SK_IOCTL_BASE + 1) +#define SK_IOCTL_PRESETMIB (SK_IOCTL_BASE + 2) +#define SK_IOCTL_GEN (SK_IOCTL_BASE + 3) +#define SK_IOCTL_DIAG (SK_IOCTL_BASE + 4) + +typedef struct s_IOCTL SK_GE_IOCTL; + +struct s_IOCTL { + char __user * pData; + unsigned int Len; +}; + + +/* + * define sizes of descriptor rings in bytes + */ + +#define TX_RING_SIZE (8*1024) +#define RX_RING_SIZE (24*1024) + +/* + * Buffer size for ethernet packets + */ +#define ETH_BUF_SIZE 1540 +#define ETH_MAX_MTU 1514 +#define ETH_MIN_MTU 60 +#define ETH_MULTICAST_BIT 0x01 +#define SK_JUMBO_MTU 9000 + +/* + * transmit priority selects the queue: LOW=asynchron, HIGH=synchron + */ +#define TX_PRIO_LOW 0 +#define TX_PRIO_HIGH 1 + +/* + * alignment of rx/tx descriptors + */ +#define DESCR_ALIGN 64 + +/* + * definitions for pnmi. TODO + */ +#define SK_DRIVER_RESET(pAC, IoC) 0 +#define SK_DRIVER_SENDEVENT(pAC, IoC) 0 +#define SK_DRIVER_SELFTEST(pAC, IoC) 0 +/* For get mtu you must add an own function */ +#define SK_DRIVER_GET_MTU(pAc,IoC,i) 0 +#define SK_DRIVER_SET_MTU(pAc,IoC,i,v) 0 +#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v) 0 + +/* +** Interim definition of SK_DRV_TIMER placed in this file until +** common modules have been finalized +*/ +#define SK_DRV_TIMER 11 +#define SK_DRV_MODERATION_TIMER 1 +#define SK_DRV_MODERATION_TIMER_LENGTH 1000000 /* 1 second */ +#define SK_DRV_RX_CLEANUP_TIMER 2 +#define SK_DRV_RX_CLEANUP_TIMER_LENGTH 1000000 /* 100 millisecs */ + +/* +** Definitions regarding transmitting frames +** any calculating any checksum. +*/ +#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6 +#define C_LEN_ETHERMAC_HEADER_SRC_ADDR 6 +#define C_LEN_ETHERMAC_HEADER_LENTYPE 2 +#define C_LEN_ETHERMAC_HEADER ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \ + (C_LEN_ETHERMAC_HEADER_SRC_ADDR) + \ + (C_LEN_ETHERMAC_HEADER_LENTYPE) ) + +#define C_LEN_ETHERMTU_MINSIZE 46 +#define C_LEN_ETHERMTU_MAXSIZE_STD 1500 +#define C_LEN_ETHERMTU_MAXSIZE_JUMBO 9000 + +#define C_LEN_ETHERNET_MINSIZE ( (C_LEN_ETHERMAC_HEADER) + \ + (C_LEN_ETHERMTU_MINSIZE) ) + +#define C_OFFSET_IPHEADER C_LEN_ETHERMAC_HEADER +#define C_OFFSET_IPHEADER_IPPROTO 9 +#define C_OFFSET_TCPHEADER_TCPCS 16 +#define C_OFFSET_UDPHEADER_UDPCS 6 + +#define C_OFFSET_IPPROTO ( (C_LEN_ETHERMAC_HEADER) + \ + (C_OFFSET_IPHEADER_IPPROTO) ) + +#define C_PROTO_ID_UDP 17 /* refer to RFC 790 or Stevens' */ +#define C_PROTO_ID_TCP 6 /* TCP/IP illustrated for details */ + +/* TX and RX descriptors *****************************************************/ + +typedef struct s_RxD RXD; /* the receive descriptor */ + +struct s_RxD { + volatile SK_U32 RBControl; /* Receive Buffer Control */ + SK_U32 VNextRxd; /* Next receive descriptor,low dword */ + SK_U32 VDataLow; /* Receive buffer Addr, low dword */ + SK_U32 VDataHigh; /* Receive buffer Addr, high dword */ + SK_U32 FrameStat; /* Receive Frame Status word */ + SK_U32 TimeStamp; /* Time stamp from XMAC */ + SK_U32 TcpSums; /* TCP Sum 2 / TCP Sum 1 */ + SK_U32 TcpSumStarts; /* TCP Sum Start 2 / TCP Sum Start 1 */ + RXD *pNextRxd; /* Pointer to next Rxd */ + struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ +}; + +typedef struct s_TxD TXD; /* the transmit descriptor */ + +struct s_TxD { + volatile SK_U32 TBControl; /* Transmit Buffer Control */ + SK_U32 VNextTxd; /* Next transmit descriptor,low dword */ + SK_U32 VDataLow; /* Transmit Buffer Addr, low dword */ + SK_U32 VDataHigh; /* Transmit Buffer Addr, high dword */ + SK_U32 FrameStat; /* Transmit Frame Status Word */ + SK_U32 TcpSumOfs; /* Reserved / TCP Sum Offset */ + SK_U16 TcpSumSt; /* TCP Sum Start */ + SK_U16 TcpSumWr; /* TCP Sum Write */ + SK_U32 TcpReserved; /* not used */ + TXD *pNextTxd; /* Pointer to next Txd */ + struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ +}; + +/* Used interrupt bits in the interrupts source register *********************/ + +#define DRIVER_IRQS ((IS_IRQ_SW) | \ + (IS_R1_F) |(IS_R2_F) | \ + (IS_XS1_F) |(IS_XA1_F) | \ + (IS_XS2_F) |(IS_XA2_F)) + +#define SPECIAL_IRQS ((IS_HW_ERR) |(IS_I2C_READY) | \ + (IS_EXT_REG) |(IS_TIMINT) | \ + (IS_PA_TO_RX1) |(IS_PA_TO_RX2) | \ + (IS_PA_TO_TX1) |(IS_PA_TO_TX2) | \ + (IS_MAC1) |(IS_LNK_SYNC_M1)| \ + (IS_MAC2) |(IS_LNK_SYNC_M2)| \ + (IS_R1_C) |(IS_R2_C) | \ + (IS_XS1_C) |(IS_XA1_C) | \ + (IS_XS2_C) |(IS_XA2_C)) + +#define IRQ_MASK ((IS_IRQ_SW) | \ + (IS_R1_B) |(IS_R1_F) |(IS_R2_B) |(IS_R2_F) | \ + (IS_XS1_B) |(IS_XS1_F) |(IS_XA1_B)|(IS_XA1_F)| \ + (IS_XS2_B) |(IS_XS2_F) |(IS_XA2_B)|(IS_XA2_F)| \ + (IS_HW_ERR) |(IS_I2C_READY)| \ + (IS_EXT_REG) |(IS_TIMINT) | \ + (IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \ + (IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \ + (IS_MAC1) |(IS_MAC2) | \ + (IS_R1_C) |(IS_R2_C) | \ + (IS_XS1_C) |(IS_XA1_C) | \ + (IS_XS2_C) |(IS_XA2_C)) + +#define IRQ_HWE_MASK (IS_ERR_MSK) /* enable all HW irqs */ + +typedef struct s_DevNet DEV_NET; + +struct s_DevNet { + int PortNr; + int NetNr; + SK_AC *pAC; +}; + +typedef struct s_TxPort TX_PORT; + +struct s_TxPort { + /* the transmit descriptor rings */ + caddr_t pTxDescrRing; /* descriptor area memory */ + SK_U64 VTxDescrRing; /* descr. area bus virt. addr. */ + TXD *pTxdRingHead; /* Head of Tx rings */ + TXD *pTxdRingTail; /* Tail of Tx rings */ + TXD *pTxdRingPrev; /* descriptor sent previously */ + int TxdRingFree; /* # of free entrys */ + spinlock_t TxDesRingLock; /* serialize descriptor accesses */ + SK_IOC HwAddr; /* bmu registers address */ + int PortIndex; /* index number of port (0 or 1) */ +}; + +typedef struct s_RxPort RX_PORT; + +struct s_RxPort { + /* the receive descriptor rings */ + caddr_t pRxDescrRing; /* descriptor area memory */ + SK_U64 VRxDescrRing; /* descr. area bus virt. addr. */ + RXD *pRxdRingHead; /* Head of Rx rings */ + RXD *pRxdRingTail; /* Tail of Rx rings */ + RXD *pRxdRingPrev; /* descriptor given to BMU previously */ + int RxdRingFree; /* # of free entrys */ + int RxCsum; /* use receive checksum hardware */ + spinlock_t RxDesRingLock; /* serialize descriptor accesses */ + int RxFillLimit; /* limit for buffers in ring */ + SK_IOC HwAddr; /* bmu registers address */ + int PortIndex; /* index number of port (0 or 1) */ +}; + +/* Definitions needed for interrupt moderation *******************************/ + +#define IRQ_EOF_AS_TX ((IS_XA1_F) | (IS_XA2_F)) +#define IRQ_EOF_SY_TX ((IS_XS1_F) | (IS_XS2_F)) +#define IRQ_MASK_TX_ONLY ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX)) +#define IRQ_MASK_RX_ONLY ((IS_R1_F) | (IS_R2_F)) +#define IRQ_MASK_SP_ONLY (SPECIAL_IRQS) +#define IRQ_MASK_TX_RX ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY)) +#define IRQ_MASK_SP_RX ((SPECIAL_IRQS) | (IRQ_MASK_RX_ONLY)) +#define IRQ_MASK_SP_TX ((SPECIAL_IRQS) | (IRQ_MASK_TX_ONLY)) +#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS) | (IRQ_MASK_TX_RX)) + +#define C_INT_MOD_NONE 1 +#define C_INT_MOD_STATIC 2 +#define C_INT_MOD_DYNAMIC 4 + +#define C_CLK_FREQ_GENESIS 53215000 /* shorter: 53.125 MHz */ +#define C_CLK_FREQ_YUKON 78215000 /* shorter: 78.125 MHz */ + +#define C_INTS_PER_SEC_DEFAULT 2000 +#define C_INT_MOD_ENABLE_PERCENTAGE 50 /* if higher 50% enable */ +#define C_INT_MOD_DISABLE_PERCENTAGE 50 /* if lower 50% disable */ +#define C_INT_MOD_IPS_LOWER_RANGE 30 +#define C_INT_MOD_IPS_UPPER_RANGE 40000 + + +typedef struct s_DynIrqModInfo DIM_INFO; +struct s_DynIrqModInfo { + unsigned long PrevTimeVal; + unsigned int PrevSysLoad; + unsigned int PrevUsedTime; + unsigned int PrevTotalTime; + int PrevUsedDescrRatio; + int NbrProcessedDescr; + SK_U64 PrevPort0RxIntrCts; + SK_U64 PrevPort1RxIntrCts; + SK_U64 PrevPort0TxIntrCts; + SK_U64 PrevPort1TxIntrCts; + SK_BOOL ModJustEnabled; /* Moderation just enabled yes/no */ + + int MaxModIntsPerSec; /* Moderation Threshold */ + int MaxModIntsPerSecUpperLimit; /* Upper limit for DIM */ + int MaxModIntsPerSecLowerLimit; /* Lower limit for DIM */ + + long MaskIrqModeration; /* ModIrqType (eg. 'TxRx') */ + SK_BOOL DisplayStats; /* Stats yes/no */ + SK_BOOL AutoSizing; /* Resize DIM-timer on/off */ + int IntModTypeSelect; /* EnableIntMod (eg. 'dynamic') */ + + SK_TIMER ModTimer; /* just some timer */ +}; + +typedef struct s_PerStrm PER_STRM; + +#define SK_ALLOC_IRQ 0x00000001 + +#ifdef SK_DIAG_SUPPORT +#define DIAG_ACTIVE 1 +#define DIAG_NOTACTIVE 0 +#endif + +/**************************************************************************** + * Per board structure / Adapter Context structure: + * Allocated within attach(9e) and freed within detach(9e). + * Contains all 'per device' necessary handles, flags, locks etc.: + */ +struct s_AC { + SK_GEINIT GIni; /* GE init struct */ + SK_PNMI Pnmi; /* PNMI data struct */ + SK_VPD vpd; /* vpd data struct */ + SK_QUEUE Event; /* Event queue */ + SK_HWT Hwt; /* Hardware Timer control struct */ + SK_TIMCTRL Tim; /* Software Timer control struct */ + SK_I2C I2c; /* I2C relevant data structure */ + SK_ADDR Addr; /* for Address module */ + SK_CSUM Csum; /* for checksum module */ + SK_RLMT Rlmt; /* for rlmt module */ + spinlock_t SlowPathLock; /* Normal IRQ lock */ + struct timer_list BlinkTimer; /* for LED blinking */ + int LedsOn; + SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */ + int RlmtMode; /* link check mode to set */ + int RlmtNets; /* Number of nets */ + + SK_IOC IoBase; /* register set of adapter */ + int BoardLevel; /* level of active hw init (0-2) */ + + SK_U32 AllocFlag; /* flag allocation of resources */ + struct pci_dev *PciDev; /* for access to pci config space */ + struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */ + + int RxBufSize; /* length of receive buffers */ + struct net_device_stats stats; /* linux 'netstat -i' statistics */ + int Index; /* internal board index number */ + + /* adapter RAM sizes for queues of active port */ + int RxQueueSize; /* memory used for receive queue */ + int TxSQueueSize; /* memory used for sync. tx queue */ + int TxAQueueSize; /* memory used for async. tx queue */ + + int PromiscCount; /* promiscuous mode counter */ + int AllMultiCount; /* allmulticast mode counter */ + int MulticCount; /* number of different MC */ + /* addresses for this board */ + /* (may be more than HW can)*/ + + int HWRevision; /* Hardware revision */ + int ActivePort; /* the active XMAC port */ + int MaxPorts; /* number of activated ports */ + int TxDescrPerRing; /* # of descriptors per tx ring */ + int RxDescrPerRing; /* # of descriptors per rx ring */ + + caddr_t pDescrMem; /* Pointer to the descriptor area */ + dma_addr_t pDescrMemDMA; /* PCI DMA address of area */ + + /* the port structures with descriptor rings */ + TX_PORT TxPort[SK_MAX_MACS][2]; + RX_PORT RxPort[SK_MAX_MACS]; + + SK_BOOL CheckQueue; /* check event queue soon */ + SK_TIMER DrvCleanupTimer;/* to check for pending descriptors */ + DIM_INFO DynIrqModInfo; /* all data related to DIM */ + + /* Only for tests */ + int PortDown; + int ChipsetType; /* Chipset family type + * 0 == Genesis family support + * 1 == Yukon family support + */ +#ifdef SK_DIAG_SUPPORT + SK_U32 DiagModeActive; /* is diag active? */ + SK_BOOL DiagFlowCtrl; /* for control purposes */ + SK_PNMI_STRUCT_DATA PnmiBackup; /* backup structure for all Pnmi-Data */ + SK_BOOL WasIfUp[SK_MAX_MACS]; /* for OpenClose while + * DIAG is busy with NIC + */ +#endif + +}; + + +#endif /* __INC_SKDRV2ND_H */ + diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h new file mode 100644 index 00000000000..da062f76623 --- /dev/null +++ b/drivers/net/sk98lin/h/skerror.h @@ -0,0 +1,55 @@ +/****************************************************************************** + * + * Name: skerror.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.7 $ + * Date: $Date: 2003/05/13 17:25:13 $ + * Purpose: SK specific Error log support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _INC_SKERROR_H_ +#define _INC_SKERROR_H_ + +/* + * Define Error Classes + */ +#define SK_ERRCL_OTHER (0) /* Other error */ +#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */ +#define SK_ERRCL_INIT (1L<<1) /* Initialization error */ +#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */ +#define SK_ERRCL_SW (1L<<3) /* Internal Software error */ +#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */ +#define SK_ERRCL_COMM (1L<<5) /* Communication error */ + + +/* + * Define Error Code Bases + */ +#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */ +#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */ +#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */ +#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */ +#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */ +#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */ +#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */ +#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */ +#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */ +#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */ +#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */ + +#endif /* _INC_SKERROR_H_ */ diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h new file mode 100644 index 00000000000..44fd4c3de81 --- /dev/null +++ b/drivers/net/sk98lin/h/skgedrv.h @@ -0,0 +1,51 @@ +/****************************************************************************** + * + * Name: skgedrv.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.10 $ + * Date: $Date: 2003/07/04 12:25:01 $ + * Purpose: Interface with the driver + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKGEDRV_H_ +#define __INC_SKGEDRV_H_ + +/* defines ********************************************************************/ + +/* + * Define the driver events. + * Usually the events are defined by the destination module. + * In case of the driver we put the definition of the events here. + */ +#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ +#define SK_DRV_NET_UP 2 /* The net is operational */ +#define SK_DRV_NET_DOWN 3 /* The net is down */ +#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ +#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ +#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ +#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ +#define SK_DRV_PORT_FAIL 8 /* One port fails */ +#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ +#define SK_DRV_POWER_DOWN 10 /* Power down mode */ +#define SK_DRV_TIMER 11 /* Timer for free use */ +#ifdef SK_NO_RLMT +#define SK_DRV_LINK_UP 12 /* Link Up event for driver */ +#define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */ +#endif +#define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */ +#endif /* __INC_SKGEDRV_H_ */ diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h new file mode 100644 index 00000000000..f6282b7956d --- /dev/null +++ b/drivers/net/sk98lin/h/skgehw.h @@ -0,0 +1,2126 @@ +/****************************************************************************** + * + * Name: skgehw.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.56 $ + * Date: $Date: 2003/09/23 09:01:00 $ + * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKGEHW_H +#define __INC_SKGEHW_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +#define BIT_31 (1UL << 31) +#define BIT_30 (1L << 30) +#define BIT_29 (1L << 29) +#define BIT_28 (1L << 28) +#define BIT_27 (1L << 27) +#define BIT_26 (1L << 26) +#define BIT_25 (1L << 25) +#define BIT_24 (1L << 24) +#define BIT_23 (1L << 23) +#define BIT_22 (1L << 22) +#define BIT_21 (1L << 21) +#define BIT_20 (1L << 20) +#define BIT_19 (1L << 19) +#define BIT_18 (1L << 18) +#define BIT_17 (1L << 17) +#define BIT_16 (1L << 16) +#define BIT_15 (1L << 15) +#define BIT_14 (1L << 14) +#define BIT_13 (1L << 13) +#define BIT_12 (1L << 12) +#define BIT_11 (1L << 11) +#define BIT_10 (1L << 10) +#define BIT_9 (1L << 9) +#define BIT_8 (1L << 8) +#define BIT_7 (1L << 7) +#define BIT_6 (1L << 6) +#define BIT_5 (1L << 5) +#define BIT_4 (1L << 4) +#define BIT_3 (1L << 3) +#define BIT_2 (1L << 2) +#define BIT_1 (1L << 1) +#define BIT_0 1L + +#define BIT_15S (1U << 15) +#define BIT_14S (1 << 14) +#define BIT_13S (1 << 13) +#define BIT_12S (1 << 12) +#define BIT_11S (1 << 11) +#define BIT_10S (1 << 10) +#define BIT_9S (1 << 9) +#define BIT_8S (1 << 8) +#define BIT_7S (1 << 7) +#define BIT_6S (1 << 6) +#define BIT_5S (1 << 5) +#define BIT_4S (1 << 4) +#define BIT_3S (1 << 3) +#define BIT_2S (1 << 2) +#define BIT_1S (1 << 1) +#define BIT_0S 1 + +#define SHIFT31(x) ((x) << 31) +#define SHIFT30(x) ((x) << 30) +#define SHIFT29(x) ((x) << 29) +#define SHIFT28(x) ((x) << 28) +#define SHIFT27(x) ((x) << 27) +#define SHIFT26(x) ((x) << 26) +#define SHIFT25(x) ((x) << 25) +#define SHIFT24(x) ((x) << 24) +#define SHIFT23(x) ((x) << 23) +#define SHIFT22(x) ((x) << 22) +#define SHIFT21(x) ((x) << 21) +#define SHIFT20(x) ((x) << 20) +#define SHIFT19(x) ((x) << 19) +#define SHIFT18(x) ((x) << 18) +#define SHIFT17(x) ((x) << 17) +#define SHIFT16(x) ((x) << 16) +#define SHIFT15(x) ((x) << 15) +#define SHIFT14(x) ((x) << 14) +#define SHIFT13(x) ((x) << 13) +#define SHIFT12(x) ((x) << 12) +#define SHIFT11(x) ((x) << 11) +#define SHIFT10(x) ((x) << 10) +#define SHIFT9(x) ((x) << 9) +#define SHIFT8(x) ((x) << 8) +#define SHIFT7(x) ((x) << 7) +#define SHIFT6(x) ((x) << 6) +#define SHIFT5(x) ((x) << 5) +#define SHIFT4(x) ((x) << 4) +#define SHIFT3(x) ((x) << 3) +#define SHIFT2(x) ((x) << 2) +#define SHIFT1(x) ((x) << 1) +#define SHIFT0(x) ((x) << 0) + +/* + * Configuration Space header + * Since this module is used for different OS', those may be + * duplicate on some of them (e.g. Linux). But to keep the + * common source, we have to live with this... + */ +#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */ +#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */ +#define PCI_COMMAND 0x04 /* 16 bit Command */ +#define PCI_STATUS 0x06 /* 16 bit Status */ +#define PCI_REV_ID 0x08 /* 8 bit Revision ID */ +#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */ +#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */ +#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */ +#define PCI_HEADER_T 0x0e /* 8 bit Header Type */ +#define PCI_BIST 0x0f /* 8 bit Built-in selftest */ +#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ +#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ + /* Byte 0x18..0x2b: reserved */ +#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */ +#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */ +#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */ +#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */ + /* Byte 0x35..0x3b: reserved */ +#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */ +#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */ +#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */ +#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */ + /* Device Dependent Region */ +#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ +#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ + /* Power Management Region */ +#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ +#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */ +#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ +#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ + /* Byte 0x4e: reserved */ +#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ + /* VPD Region */ +#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ +#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */ +#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ +#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ + /* Byte 0x58..0x59: reserved */ +#define PCI_SER_LD_CTRL 0x5a /* 16 bit SEEPROM Loader Ctrl (YUKON only) */ + /* Byte 0x5c..0xff: reserved */ + +/* + * I2C Address (PCI Config) + * + * Note: The temperature and voltage sensors are relocated on a different + * I2C bus. + */ +#define I2C_ADDR_VPD 0xa0 /* I2C address for the VPD EEPROM */ + +/* + * Define Bits and Values of the registers + */ +/* PCI_COMMAND 16 bit Command */ + /* Bit 15..11: reserved */ +#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */ +#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */ +#define PCI_SERREN BIT_8S /* SERR enable */ +#define PCI_ADSTEP BIT_7S /* Address Stepping */ +#define PCI_PERREN BIT_6S /* Parity Report Response enable */ +#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */ +#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */ +#define PCI_SCYCEN BIT_3S /* Special Cycle enable */ +#define PCI_BMEN BIT_2S /* Bus Master enable */ +#define PCI_MEMEN BIT_1S /* Memory Space Access enable */ +#define PCI_IOEN BIT_0S /* I/O Space Access enable */ + +#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\ + PCI_BMEN | PCI_MEMEN | PCI_IOEN) + +/* PCI_STATUS 16 bit Status */ +#define PCI_PERR BIT_15S /* Parity Error */ +#define PCI_SERR BIT_14S /* Signaled SERR */ +#define PCI_RMABORT BIT_13S /* Received Master Abort */ +#define PCI_RTABORT BIT_12S /* Received Target Abort */ + /* Bit 11: reserved */ +#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */ +#define PCI_DEV_FAST (0<<9) /* fast */ +#define PCI_DEV_MEDIUM (1<<9) /* medium */ +#define PCI_DEV_SLOW (2<<9) /* slow */ +#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */ +#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */ +#define PCI_UDF BIT_6S /* User Defined Features */ +#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */ +#define PCI_NEWCAP BIT_4S /* New cap. list implemented */ +#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */ + /* Bit 2.. 0: reserved */ + +#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\ + PCI_DATAPERR) + +/* PCI_CLASS_CODE 24 bit Class Code */ +/* Byte 2: Base Class (02) */ +/* Byte 1: SubClass (00) */ +/* Byte 0: Programming Interface (00) */ + +/* PCI_CACHE_LSZ 8 bit Cache Line Size */ +/* Possible values: 0,2,4,8,16,32,64,128 */ + +/* PCI_HEADER_T 8 bit Header Type */ +#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */ +#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */ + +/* PCI_BIST 8 bit Built-in selftest */ +/* Built-in Self test not supported (optional) */ + +/* PCI_BASE_1ST 32 bit 1st Base address */ +#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */ +#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */ +#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */ +#define PCI_PREFEN BIT_3 /* Prefetchable */ +#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */ +#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */ +#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */ +#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */ +#define PCI_MEMSPACE BIT_0 /* Memory Space Indicator */ + +/* PCI_BASE_2ND 32 bit 2nd Base address */ +#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */ +#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */ + /* Bit 1: reserved */ +#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */ + +/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */ +#define PCI_ROMBASE_MSK 0xfffe0000L /* Bit 31..17: ROM Base address */ +#define PCI_ROMBASE_SIZ (0x1cL<<14) /* Bit 16..14: Treat as Base or Size */ +#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */ + /* Bit 10.. 1: reserved */ +#define PCI_ROMEN BIT_0 /* Address Decode enable */ + +/* Device Dependent Region */ +/* PCI_OUR_REG_1 32 bit Our Register 1 */ + /* Bit 31..29: reserved */ +#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode (YUKON only) */ +#define PCI_TEST_CAL BIT_27 /* Test PCI buffer calib. (YUKON only) */ +#define PCI_EN_CAL BIT_26 /* Enable PCI buffer calib. (YUKON only) */ +#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */ +#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ +#define PCI_EN_IO BIT_23 /* Mapping to I/O space */ +#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ + /* 1 = Map Flash to memory */ + /* 0 = Disable addr. dec */ +#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */ +#define PCI_PAGE_16 (0L<<20) /* 16 k pages */ +#define PCI_PAGE_32K (1L<<20) /* 32 k pages */ +#define PCI_PAGE_64K (2L<<20) /* 64 k pages */ +#define PCI_PAGE_128K (3L<<20) /* 128 k pages */ + /* Bit 19: reserved */ +#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */ +#define PCI_NOTAR BIT_15 /* No turnaround cycle */ +#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ +#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ +#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ +#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ +#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ +#define PCI_BURST_DIS BIT_9 /* Burst Disable */ +#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ +#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */ +#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ + + +/* PCI_OUR_REG_2 32 bit Our Register 2 */ +#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */ +#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */ +#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */ + /* Bit 13..12: reserved */ +#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ +#define PCI_PATCH_DIR_3 BIT_11 +#define PCI_PATCH_DIR_2 BIT_10 +#define PCI_PATCH_DIR_1 BIT_9 +#define PCI_PATCH_DIR_0 BIT_8 +#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */ +#define PCI_EXT_PATCH_3 BIT_7 +#define PCI_EXT_PATCH_2 BIT_6 +#define PCI_EXT_PATCH_1 BIT_5 +#define PCI_EXT_PATCH_0 BIT_4 +#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ +#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ + /* Bit 1: reserved */ +#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ + + +/* Power Management Region */ +/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */ +#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */ +#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */ +#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */ +#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */ +#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */ +#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */ +#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */ +#define PCI_PM_D1_SUP BIT_9S /* D1 Support */ + /* Bit 8.. 6: reserved */ +#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */ +#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */ +#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */ +#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */ + +/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */ +#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */ +#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */ +#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */ +#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */ + /* Bit 7.. 2: reserved */ +#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */ + +#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */ +#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */ +#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */ +#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ + +/* VPD Region */ +/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ +#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */ +#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */ + +/* Control Register File (Address Map) */ + +/* + * Bank 0 + */ +#define B0_RAP 0x0000 /* 8 bit Register Address Port */ + /* 0x0001 - 0x0003: reserved */ +#define B0_CTST 0x0004 /* 16 bit Control/Status register */ +#define B0_LED 0x0006 /* 8 Bit LED register */ +#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ +#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ +#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ +#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ +#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ +#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */ + /* 0x001c: reserved */ + +/* B0 XMAC 1 registers (GENESIS only) */ +#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/ + /* 0x0022 - 0x0027: reserved */ +#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */ + /* 0x002a - 0x002f: reserved */ +#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */ + /* 0x0032 - 0x0033: reserved */ +#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */ + /* 0x0036 - 0x003f: reserved */ + +/* B0 XMAC 2 registers (GENESIS only) */ +#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/ + /* 0x0042 - 0x0047: reserved */ +#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */ + /* 0x004a - 0x004f: reserved */ +#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */ + /* 0x0052 - 0x0053: reserved */ +#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */ + /* 0x0056 - 0x005f: reserved */ + +/* BMU Control Status Registers */ +#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */ +#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */ +#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/ +#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/ + /* 0x0078 - 0x007f: reserved */ + +/* + * Bank 1 + * - completely empty (this is the RAP Block window) + * Note: if RAP = 1 this page is reserved + */ + +/* + * Bank 2 + */ +/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ +#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ + /* 0x0106 - 0x0107: reserved */ +#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ + /* 0x010e - 0x010f: reserved */ +#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ + /* 0x0116 - 0x0117: reserved */ +#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ +#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ +#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ +#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ + /* Eprom registers are currently of no use */ +#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ +#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */ +#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */ +#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ +#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */ +#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */ + /* 0x0125 - 0x0127: reserved */ +#define B2_LD_CTRL 0x0128 /* 8 bit EPROM loader control register */ +#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */ + /* 0x012a - 0x012f: reserved */ +#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ +#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ +#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ +#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ + /* 0x013a - 0x013f: reserved */ +#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ +#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ +#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ +#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ +#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ +#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ + /* 0x0154 - 0x0157: reserved */ +#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ +#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ + /* 0x015a - 0x015b: reserved */ +#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ +#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ +#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ +#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ +#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ + +/* Blink Source Counter (GENESIS only) */ +#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */ +#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */ +#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */ +#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */ +#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */ + /* 0x017c - 0x017f: reserved */ + +/* + * Bank 3 + */ +/* RAM Random Registers */ +#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ +#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ +#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ + /* 0x018c - 0x018f: reserved */ + +/* RAM Interface Registers */ +/* + * The HW-Spec. calls this registers Timeout Value 0..11. But this names are + * not usable in SW. Please notice these are NOT real timeouts, these are + * the number of qWords transferred continuously. + */ +#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ +#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ +#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ +#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ +#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ +#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ +#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ +#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ +#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ +#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ +#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ +#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ +#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ + /* 0x019d - 0x019f: reserved */ +#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ +#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ + /* 0x01a3 - 0x01af: reserved */ + +/* MAC Arbiter Registers (GENESIS only) */ +/* these are the no. of qWord transferred continuously and NOT real timeouts */ +#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */ +#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */ +#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */ +#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */ +#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */ +#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */ +#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */ +#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */ +#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */ +#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */ + /* 0x01bc - 0x01bf: reserved */ +#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */ +#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */ +#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */ +#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */ +#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */ +#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */ +#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */ +#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */ +#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */ +#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */ + /* 0x01cc - 0x01cf: reserved */ + +/* Packet Arbiter Registers (GENESIS only) */ +/* these are real timeouts */ +#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */ + /* 0x01d2 - 0x01d3: reserved */ +#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */ + /* 0x01d6 - 0x01d7: reserved */ +#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */ + /* 0x01da - 0x01db: reserved */ +#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */ + /* 0x01de - 0x01df: reserved */ +#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */ + /* 0x01e2 - 0x01e3: reserved */ +#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */ + /* 0x01e6 - 0x01e7: reserved */ +#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */ + /* 0x01ea - 0x01eb: reserved */ +#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */ + /* 0x01ee - 0x01ef: reserved */ +#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */ +#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */ + /* 0x01f4 - 0x01ff: reserved */ + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ +#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ +#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ +#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ +#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ +#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ +#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ + /* 0x0213 - 0x027f: reserved */ + /* 0x0280 - 0x0292: MAC 2 */ + /* 0x0213 - 0x027f: reserved */ + +/* + * Bank 6 + */ +/* External registers (GENESIS only) */ +#define B6_EXT_REG 0x0300 + +/* + * Bank 7 + */ +/* This is a copy of the Configuration register file (lower half) */ +#define B7_CFG_SPC 0x0380 + +/* + * Bank 8 - 15 + */ +/* Receive and Transmit Queue Registers, use Q_ADDR() to access */ +#define B8_Q_REGS 0x0400 + +/* Queue Register Offsets, use Q_ADDR() to access */ +#define Q_D 0x00 /* 8*32 bit Current Descriptor */ +#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ +#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */ +#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ +#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ +#define Q_BC 0x30 /* 32 bit Current Byte Counter */ +#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ +#define Q_F 0x38 /* 32 bit Flag Register */ +#define Q_T1 0x3c /* 32 bit Test Register 1 */ +#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ +#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ +#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ +#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ +#define Q_T2 0x40 /* 32 bit Test Register 2 */ +#define Q_T3 0x44 /* 32 bit Test Register 3 */ + /* 0x48 - 0x7f: reserved */ + +/* + * Bank 16 - 23 + */ +/* RAM Buffer Registers */ +#define B16_RAM_REGS 0x0800 + +/* RAM Buffer Register Offsets, use RB_ADDR() to access */ +#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ +#define RB_END 0x04 /* 32 bit RAM Buffer End Address */ +#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ +#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ +#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */ +#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */ +#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ +#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ +#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ +#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ +#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ +#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ +#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */ + /* 0x2c - 0x7f: reserved */ + +/* + * Bank 24 + */ +/* + * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) + * use MR_ADDR() to access + */ +#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */ +#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ + /* 0x0c08 - 0x0c0b: reserved */ +#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */ +#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */ +#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */ +#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/ +#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */ +#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */ +#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/ +#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */ +#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */ + /* 0x0c1f: reserved */ +#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */ +#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */ +#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */ +#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */ + /* 0x0c2a - 0x0c2f: reserved */ +#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */ +#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */ +#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */ +#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */ + /* 0x0c3a - 0x0c3b: reserved */ +#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */ + /* 0x0c3d - 0x0c3f: reserved */ + +/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */ +#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ +#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ +#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ +#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ +#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ + /* 0x0c54 - 0x0c5f: reserved */ +#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ + /* 0x0c64 - 0x0c67: reserved */ +#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ + /* 0x0c6c - 0x0c6f: reserved */ +#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ + /* 0x0c74 - 0x0c77: reserved */ +#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ + /* 0x0c7c - 0x0c7f: reserved */ + +/* + * Bank 25 + */ + /* 0x0c80 - 0x0cbf: MAC 2 */ + /* 0x0cc0 - 0x0cff: reserved */ + +/* + * Bank 26 + */ +/* + * Transmit MAC FIFO and Transmit LED Registers (GENESIS only), + * use MR_ADDR() to access + */ +#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */ +#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ +#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */ +#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */ +#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */ +#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */ +#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ +#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */ + /* 0x0c1b: reserved */ +#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ +#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */ +#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */ + /* 0x0d1f: reserved */ +#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */ +#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */ +#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */ +#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */ + /* 0x0d2a - 0x0d3f: reserved */ + +/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */ +#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ +#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ + /* 0x0d4c - 0x0d5f: reserved */ +#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ +#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ + /* 0x0d6c - 0x0d6f: reserved */ +#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ +#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ +#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ + /* 0x0d7c - 0x0d7f: reserved */ + +/* + * Bank 27 + */ + /* 0x0d80 - 0x0dbf: MAC 2 */ + /* 0x0daa - 0x0dff: reserved */ + +/* + * Bank 28 + */ +/* Descriptor Poll Timer Registers */ +#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ +#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ +#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ + /* 0x0e09: reserved */ +#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ + /* 0x0e0b: reserved */ + +/* Time Stamp Timer Registers (YUKON only) */ + /* 0x0e10: reserved */ +#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ +#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ + /* 0x0e19: reserved */ +#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ + /* 0x0e1b - 0x0e7f: reserved */ + +/* + * Bank 29 + */ + /* 0x0e80 - 0x0efc: reserved */ + +/* + * Bank 30 + */ +/* GMAC and GPHY Control Registers (YUKON only) */ +#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ +#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ +#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ + /* 0x0f09 - 0x0f0b: reserved */ +#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ + /* 0x0f0d - 0x0f0f: reserved */ +#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ + /* 0x0f14 - 0x0f1f: reserved */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + +#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ + +#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ +#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ +#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ +#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ +#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ +#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */ + +/* use this macro to access above registers */ +#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs)) + + +/* WOL Pattern Length Registers (YUKON only) */ + +#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ +#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + +#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ +#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ + /* 0x0f40 - 0x0f7f: reserved */ + +/* + * Bank 31 + */ +/* 0x0f80 - 0x0fff: reserved */ + +/* + * Bank 32 - 33 + */ +#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ + +/* + * Bank 0x22 - 0x3f + */ +/* 0x1100 - 0x1fff: reserved */ + +/* + * Bank 0x40 - 0x4f + */ +#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */ + +/* + * Bank 0x50 - 0x5f + */ + +#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ + +/* + * Bank 0x60 - 0x6f + */ +#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */ + +/* + * Bank 0x70 - 0x7f + */ +#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ + +/* + * Control Register Bit Definitions: + */ +/* B0_RAP 8 bit Register Address Port */ + /* Bit 7: reserved */ +#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */ + +/* B0_CTST 16 bit Control/Status register */ + /* Bit 15..14: reserved */ +#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */ +#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */ +#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */ +#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */ +#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */ +#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */ +#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */ +#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */ +#define CS_STOP_DONE BIT_5S /* Stop Master is finished */ +#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */ +#define CS_MRST_CLR BIT_3S /* Clear Master reset */ +#define CS_MRST_SET BIT_2S /* Set Master reset */ +#define CS_RST_CLR BIT_1S /* Clear Software reset */ +#define CS_RST_SET BIT_0S /* Set Software reset */ + +/* B0_LED 8 Bit LED register */ + /* Bit 7.. 2: reserved */ +#define LED_STAT_ON BIT_1S /* Status LED on */ +#define LED_STAT_OFF BIT_0S /* Status LED off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ +#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ +#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ +#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ +#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ +#define PC_VAUX_ON BIT_3 /* Switch VAUX On */ +#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ +#define PC_VCC_ON BIT_1 /* Switch VCC On */ +#define PC_VCC_OFF BIT_0 /* Switch VCC Off */ + +/* B0_ISRC 32 bit Interrupt Source Register */ +/* B0_IMSK 32 bit Interrupt Mask Register */ +/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +#define IS_ALL_MSK 0xbfffffffUL /* All Interrupt bits */ +#define IS_HW_ERR BIT_31 /* Interrupt HW Error */ + /* Bit 30: reserved */ +#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */ +#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */ +#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */ +#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */ +#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */ +#define IS_IRQ_SW BIT_24 /* SW forced IRQ */ +#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */ + /* IRQ from PHY (YUKON only) */ +#define IS_TIMINT BIT_22 /* IRQ from Timer */ +#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */ +#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */ +#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */ +#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */ +/* Receive Queue 1 */ +#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */ +#define IS_R1_F BIT_16 /* Q_R1 End of Frame */ +#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */ +/* Receive Queue 2 */ +#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */ +#define IS_R2_F BIT_13 /* Q_R2 End of Frame */ +#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */ +/* Synchronous Transmit Queue 1 */ +#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */ +#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */ +#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */ +/* Asynchronous Transmit Queue 1 */ +#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */ +#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */ +#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */ +/* Synchronous Transmit Queue 2 */ +#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */ +#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */ +#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */ +/* Asynchronous Transmit Queue 2 */ +#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */ +#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */ +#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */ + + +/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ +/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +#define IS_ERR_MSK 0x00000fffL /* All Error bits */ + /* Bit 31..14: reserved */ +#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */ +#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */ +#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */ +#define IS_IRQ_STAT BIT_10 /* IRQ status exception */ +#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */ +#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */ +#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */ +#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */ +#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */ +#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */ +#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */ +#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */ +#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */ +#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */ + +/* B2_CONN_TYP 8 bit Connector type */ +/* B2_PMD_TYP 8 bit PMD type */ +/* Values of connector and PMD type comply to SysKonnect internal std */ + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ +#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */ +#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/ + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ +#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ +#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ +#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ + +#define CHIP_REV_YU_LITE_A1 3 /* Chip Rev. for YUKON-Lite A1,A2 */ +#define CHIP_REV_YU_LITE_A3 7 /* Chip Rev. for YUKON-Lite A3 */ + +/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */ +#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */ + +/* B2_LD_CTRL 8 bit EPROM loader control register */ +/* Bits are currently reserved */ + +/* B2_LD_TEST 8 bit EPROM loader test register */ + /* Bit 7.. 4: reserved */ +#define LD_T_ON BIT_3S /* Loader Test mode on */ +#define LD_T_OFF BIT_2S /* Loader Test mode off */ +#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */ +#define LD_START BIT_0S /* Start loading FPROM */ + +/* + * Timer Section + */ +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ + /* Bit 7.. 3: reserved */ +#define TIM_START BIT_2S /* Start Timer */ +#define TIM_STOP BIT_1S /* Stop Timer */ +#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */ + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ + /* Bit 7.. 3: reserved */ +#define TIM_T_ON BIT_2S /* Test mode on */ +#define TIM_T_OFF BIT_1S /* Test mode off */ +#define TIM_T_STEP BIT_0S /* Test step */ + +/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ +/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ + /* Bit 31..24: reserved */ +#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */ + +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ + /* Bit 7.. 2: reserved */ +#define DPT_START BIT_1S /* Start Descriptor Poll Timer */ +#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */ + +/* B2_E_3 8 bit lower 4 bits used for HW self test result */ +#define B2_E3_RES_MASK 0x0f + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */ +#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */ +#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */ +#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */ +#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */ +#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */ +#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */ +#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */ + +/* B2_TST_CTRL2 8 bit Test Control Register 2 */ + /* Bit 7.. 4: reserved */ + /* force the following error on the next master read/write */ +#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */ +#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */ +#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */ +#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */ + +/* B2_GP_IO 32 bit General Purpose I/O Register */ + /* Bit 31..26: reserved */ +#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=In/1=Out */ +#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=In/1=Out */ +#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=In/1=Out */ +#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=In/1=Out */ +#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=In/1=Out */ +#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=In/1=Out */ +#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=In/1=Out */ +#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=In/1=Out */ +#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=In/1=Out */ +#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=In/1=Out */ + /* Bit 15..10: reserved */ +#define GP_IO_9 BIT_9 /* IO_9 pin */ +#define GP_IO_8 BIT_8 /* IO_8 pin */ +#define GP_IO_7 BIT_7 /* IO_7 pin */ +#define GP_IO_6 BIT_6 /* IO_6 pin */ +#define GP_IO_5 BIT_5 /* IO_5 pin */ +#define GP_IO_4 BIT_4 /* IO_4 pin */ +#define GP_IO_3 BIT_3 /* IO_3 pin */ +#define GP_IO_2 BIT_2 /* IO_2 pin */ +#define GP_IO_1 BIT_1 /* IO_1 pin */ +#define GP_IO_0 BIT_0 /* IO_0 pin */ + +/* B2_I2C_CTRL 32 bit I2C HW Control Register */ +#define I2C_FLAG BIT_31 /* Start read/write if WR */ +#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */ +#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */ + /* Bit 8.. 5: reserved */ +#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ +#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ +#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */ +#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ +#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ +#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ +#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ +#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ +#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ +#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ +#define I2C_STOP BIT_0 /* Interrupt I2C transfer */ + +/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ + /* Bit 31.. 1 reserved */ +#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ + +/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ + /* Bit 7.. 3: reserved */ +#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */ +#define I2C_DATA BIT_1S /* I2C Data Port */ +#define I2C_CLK BIT_0S /* I2C Clock Port */ + +/* + * I2C Address + */ +#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/ + + +/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ + /* Bit 7.. 2: reserved */ +#define BSC_START BIT_1S /* Start Blink Source Counter */ +#define BSC_STOP BIT_0S /* Stop Blink Source Counter */ + +/* B2_BSC_STAT 8 bit Blink Source Counter Status */ + /* Bit 7.. 1: reserved */ +#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */ + +/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ +#define BSC_T_ON BIT_2S /* Test mode on */ +#define BSC_T_OFF BIT_1S /* Test mode off */ +#define BSC_T_STEP BIT_0S /* Test step */ + + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ + +/* RAM Interface Registers */ +/* B3_RI_CTRL 16 bit RAM Iface Control Register */ + /* Bit 15..10: reserved */ +#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */ +#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/ + /* Bit 7.. 2: reserved */ +#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */ +#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */ + +/* B3_RI_TEST 8 bit RAM Iface Test Register */ + /* Bit 15.. 4: reserved */ +#define RI_T_EV BIT_3S /* Timeout Event occured */ +#define RI_T_ON BIT_2S /* Timeout Timer Test On */ +#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */ +#define RI_T_STEP BIT_0S /* Timeout Timer Step */ + +/* MAC Arbiter Registers */ +/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ + /* Bit 15.. 4: reserved */ +#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */ +#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */ +#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ +#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ + +/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ + /* Bit 15.. 8: reserved */ +#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */ +#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */ +#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */ +#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */ +#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */ +#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */ +#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */ +#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */ + +/* Packet Arbiter Registers */ +/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ + /* Bit 15..14: reserved */ +#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */ +#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */ +#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */ +#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */ +#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */ +#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */ +#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */ +#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */ +#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */ +#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */ +#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */ +#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */ +#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ +#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ + +#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ + PA_ENA_TO_TX1 | PA_ENA_TO_TX2) + +/* Rx/Tx Path related Arbiter Test Registers */ +/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ +/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ +/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ +/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ +#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */ +#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */ +#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */ +#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */ +#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */ +#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */ +#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */ +#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */ +#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */ +#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */ +#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */ +#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */ +#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */ +#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */ +#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */ +#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */ + + +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + /* Bit 31..24: reserved */ +#define TXA_MAX_VAL 0x00ffffffUL/* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */ +#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */ +#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */ +#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */ +#define TXA_START_RC BIT_3S /* Start sync Rate Control */ +#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */ +#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */ +#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */ + +/* TXA_TEST 8 bit Tx Arbiter Test Register */ + /* Bit 7.. 6: reserved */ +#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */ +#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */ +#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */ +#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */ +#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */ +#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */ + +/* TXA_STAT 8 bit Tx Arbiter Status Register */ + /* Bit 7.. 1: reserved */ +#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */ + +/* Q_BC 32 bit Current Byte Counter */ + /* Bit 31..16: reserved */ +#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + /* Bit 31..25: reserved */ +#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */ + /* Bit 23..22: reserved */ +#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */ +#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */ +#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */ +#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */ +#define CSR_HPI_RUN BIT_17 /* Release HPI SM */ +#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */ +#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */ +#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */ +#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */ +#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */ +#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */ +#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */ +#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */ +#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */ +#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */ +#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */ +#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */ +#define CSR_START BIT_4 /* Start Rx/Tx Queue */ +#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */ +#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */ +#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */ +#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */ + +#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ + CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ + CSR_TRANS_RST) +#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ + CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ + CSR_TRANS_RUN) + +/* Q_F 32 bit Flag Register */ + /* Bit 31..28: reserved */ +#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */ +#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ +#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ +#define F_WM_REACHED BIT_25 /* Watermark reached */ + /* reserved */ +#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */ + /* Bit 15..11: reserved */ +#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */ + +/* Q_T1 32 bit Test Register 1 */ +/* Holds four State Machine control Bytes */ +#define SM_CTRL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */ +#define SM_CTRL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */ +#define SM_CTRL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */ +#define SM_CTRL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */ + +/* Q_T1_TR 8 bit Test Register 1 Transfer SM */ +/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */ +/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */ +/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */ + +/* The control status byte of each machine looks like ... */ +#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */ +#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */ +#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */ +#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */ +#define SM_STEP BIT_0S /* Step the State Machine */ +/* The encoding of the states is not supported by the Diagnostics Tool */ + +/* Q_T2 32 bit Test Register 2 */ + /* Bit 31.. 8: reserved */ +#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */ +#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */ +#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */ +#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */ +#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */ +#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */ +#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */ +#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */ + +/* Q_T3 32 bit Test Register 3 */ + /* Bit 31.. 7: reserved */ +#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */ + /* Bit 3: reserved */ +#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */ + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + /* Bit 31..19: reserved */ +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ + +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ + /* Bit 7.. 4: reserved */ +#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */ +#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */ +#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */ +#define RB_PC_INC BIT_0S /* Packet Counter Increm */ + +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + /* Bit 7: reserved */ +#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */ +#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */ +#define RB_WP_INC BIT_4S /* Write Pointer Increm */ + /* Bit 3: reserved */ +#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */ +#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */ +#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ + /* Bit 7.. 6: reserved */ +#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */ +#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */ +#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */ +#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */ +#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */ +#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */ + + +/* Receive and Transmit MAC FIFO Registers (GENESIS only) */ + +/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */ +/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ +/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */ +/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */ +/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */ +/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */ +/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ +/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */ +/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */ +/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */ +/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */ + /* Bit 31.. 6: reserved */ +#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */ + +/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ + /* Bit 15..14: reserved */ +#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */ +#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */ +#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */ +#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */ +#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */ +#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */ +#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */ +#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */ +#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */ +#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */ +#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */ +#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */ +#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */ +#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */ + +#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT + +/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ +#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */ + /* Bit 14: reserved */ +#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */ +#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */ +/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */ +/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */ +/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */ +/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */ +#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */ +#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */ +/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */ +/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */ +#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */ +#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */ +#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */ +#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */ + +#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) + +/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ +/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ + /* Bit 7: reserved */ +#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */ +#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */ +#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */ +#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */ +#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */ +#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */ +#define MFF_PC_INC BIT_0S /* Packet Counter Increment */ + +/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ +/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ + /* Bit 7: reserved */ +#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */ +#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */ +#define MFF_WP_INC BIT_4S /* Write Pointer Increm */ + /* Bit 3: reserved */ +#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */ +#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */ +#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */ + +/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ +/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ + /* Bit 7..4: reserved */ +#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */ +#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */ +#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */ +#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */ + + +/* Link LED Counter Registers (GENESIS only) */ + +/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ +/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ +/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ + /* Bit 7.. 3: reserved */ +#define LED_START BIT_2S /* Start Timer */ +#define LED_STOP BIT_1S /* Stop Timer */ +#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */ +#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */ + +/* RX_LED_TST 8 bit Receive LED Cnt Test Register */ +/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ +/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ + /* Bit 7.. 3: reserved */ +#define LED_T_ON BIT_2S /* LED Counter Test mode On */ +#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */ +#define LED_T_STEP BIT_0S /* LED Counter Step */ + +/* LNK_LED_REG 8 bit Link LED Register */ + /* Bit 7.. 6: reserved */ +#define LED_BLK_ON BIT_5S /* Link LED Blinking On */ +#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */ +#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */ +#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */ +#define LED_ON BIT_1S /* switch LED on */ +#define LED_OFF BIT_0S /* switch LED off */ + +/* Receive and Transmit GMAC FIFO Registers (YUKON only) */ + +/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ +/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ +/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ +/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ +/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ +/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ +/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ +/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ +/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ +/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ + /* Bits 31..15: reserved */ +#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ +#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ +#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ + /* Bit 11: reserved */ +#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ +#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ +#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ +#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ +#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ +#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ +#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ +#define GMF_OPER_ON BIT_3 /* Operational Mode On */ +#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ +#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ +#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ + /* Bits 31..19: reserved */ +#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ +#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ +#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ + /* Bits 15..7: same as for RX_GMF_CTRL_T */ +#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ +#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ +#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ + /* Bits 3..0: same as for RX_GMF_CTRL_T */ + +#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) +#define GMF_TX_CTRL_DEF GMF_OPER_ON + +#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ + /* Bit 7.. 3: reserved */ +#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */ +#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */ +#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */ + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ + /* Bits 31.. 8: reserved */ +#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ +#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ +#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ +#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ +#define GMC_PAUSE_ON BIT_3 /* Pause On */ +#define GMC_PAUSE_OFF BIT_2 /* Pause Off */ +#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ +#define GMC_RST_SET BIT_0 /* Set GMAC Reset */ + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ + /* Bits 31..29: reserved */ +#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ +#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */ +#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ +#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ +#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ +#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ +#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ +#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ +#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ +#define GPC_ANEG_0 BIT_19 /* ANEG[0] */ +#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ +#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ +#define GPC_ANEG_3 BIT_16 /* ANEG[3] */ +#define GPC_ANEG_2 BIT_15 /* ANEG[2] */ +#define GPC_ANEG_1 BIT_14 /* ANEG[1] */ +#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ +#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ +#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ +#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ +#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ +#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ +#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ +#define GPC_RST_SET BIT_0 /* Set GPHY Reset */ + +#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \ + GPC_HWCFG_M_1 | GPC_HWCFG_M_0) + +#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \ + GPC_HWCFG_M_1 | GPC_HWCFG_M_0) + +#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \ + GPC_ANEG_1 | GPC_ANEG_0) + +/* forced speed and duplex mode (don't mix with other ANEG bits) */ +#define GPC_FRC10MBIT_HALF 0 +#define GPC_FRC10MBIT_FULL GPC_ANEG_0 +#define GPC_FRC100MBIT_HALF GPC_ANEG_1 +#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) + +/* auto-negotiation with limited advertised speeds */ +/* mix only with master/slave settings (for copper) */ +#define GPC_ADV_1000_HALF GPC_ANEG_2 +#define GPC_ADV_1000_FULL GPC_ANEG_3 +#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) + +/* master/slave settings */ +/* only for copper with 1000 Mbps */ +#define GPC_FORCE_MASTER 0 +#define GPC_FORCE_SLAVE GPC_ANEG_0 +#define GPC_PREF_MASTER GPC_ANEG_1 +#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */ +#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */ +#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ +#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ +#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ +#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \ + GM_IS_TX_FF_UR) + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ +#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */ +#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ +#define WOL_CTL_LINK_CHG_OCC BIT_15S +#define WOL_CTL_MAGIC_PKT_OCC BIT_14S +#define WOL_CTL_PATTERN_OCC BIT_13S + +#define WOL_CTL_CLEAR_RESULT BIT_12S + +#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S +#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S +#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S +#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S +#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S +#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S + +#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S +#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S +#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S +#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S +#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S +#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) + +#define SK_NUM_WOL_PATTERN 7 +#define SK_PATTERN_PER_WORD 4 +#define SK_BITMASK_PATTERN 7 +#define SK_POW_PATTERN_LENGTH 128 + +#define WOL_LENGTH_MSK 0x7f +#define WOL_LENGTH_SHIFT 8 + + +/* Receive and Transmit Descriptors ******************************************/ + +/* Transmit Descriptor struct */ +typedef struct s_HwTxd { + SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */ + SK_U32 TxNext; /* Physical Address Pointer to the next TxD */ + SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */ + SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */ + SK_U32 TxStat; /* Transmit Frame Status Word */ +#ifndef SK_USE_REV_DESC + SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ + SK_U16 TxRes1; /* 16 bit reserved field */ + SK_U16 TxTcpWp; /* TCP Checksum Write Position */ + SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ +#else /* SK_USE_REV_DESC */ + SK_U16 TxRes1; /* 16 bit reserved field */ + SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ + SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ + SK_U16 TxTcpWp; /* TCP Checksum Write Position */ +#endif /* SK_USE_REV_DESC */ + SK_U32 TxRes2; /* 32 bit reserved field */ +} SK_HWTXD; + +/* Receive Descriptor struct */ +typedef struct s_HwRxd { + SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */ + SK_U32 RxNext; /* Physical Address Pointer to the next RxD */ + SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */ + SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */ + SK_U32 RxStat; /* Receive Frame Status Word */ + SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */ +#ifndef SK_USE_REV_DESC + SK_U16 RxTcpSum1; /* TCP Checksum 1 */ + SK_U16 RxTcpSum2; /* TCP Checksum 2 */ + SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ + SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ +#else /* SK_USE_REV_DESC */ + SK_U16 RxTcpSum2; /* TCP Checksum 2 */ + SK_U16 RxTcpSum1; /* TCP Checksum 1 */ + SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ + SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ +#endif /* SK_USE_REV_DESC */ +} SK_HWRXD; + +/* + * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2) + * should set the define SK_USE_REV_DESC. + * Structures are 'normaly' not endianess dependent. But in + * this case the SK_U16 fields are bound to bit positions inside the + * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord. + * The bit positions inside a DWord are of course endianess dependent and + * swaps if the DWord is swapped by the hardware. + */ + + +/* Descriptor Bit Definition */ +/* TxCtrl Transmit Buffer Control Field */ +/* RxCtrl Receive Buffer Control Field */ +#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ +#define BMU_STF BIT_30 /* Start of Frame */ +#define BMU_EOF BIT_29 /* End of Frame */ +#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ +#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ +/* TxCtrl specific bits */ +#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ +#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ +#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ +/* RxCtrl specific bits */ +#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ +#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ +#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ + /* Bit 23..16: BMU Check Opcodes */ +#define BMU_CHECK (0x55L<<16) /* Default BMU check */ +#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */ +#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */ +#define BMU_BBC 0xffffL /* Bit 15.. 0: Buffer Byte Counter */ + +/* TxStat Transmit Frame Status Word */ +/* RxStat Receive Frame Status Word */ +/* + *Note: TxStat is reserved for ASIC loopback mode only + * + * The Bits of the Status words are defined in xmac_ii.h + * (see XMR_FS bits) + */ + +/* macros ********************************************************************/ + +/* Receive and Transmit Queues */ +#define Q_R1 0x0000 /* Receive Queue 1 */ +#define Q_R2 0x0080 /* Receive Queue 2 */ +#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ +#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ +#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ +#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ + +/* + * Macro Q_ADDR() + * + * Use this macro to access the Receive and Transmit Queue Registers. + * + * para: + * Queue Queue to access. + * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 + * Offs Queue register offset. + * Values: Q_D, Q_DA_L ... Q_T2, Q_T3 + * + * usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal) + */ +#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) + +/* + * Macro RB_ADDR() + * + * Use this macro to access the RAM Buffer Registers. + * + * para: + * Queue Queue to access. + * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 + * Offs Queue register offset. + * Values: RB_START, RB_END ... RB_LEV, RB_CTRL + * + * usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal) + */ +#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) + + +/* MAC Related Registers */ +#define MAC_1 0 /* belongs to the port near the slot */ +#define MAC_2 1 /* belongs to the port far away from the slot */ + +/* + * Macro MR_ADDR() + * + * Use this macro to access a MAC Related Registers inside the ASIC. + * + * para: + * Mac MAC to access. + * Values: MAC_1, MAC_2 + * Offs MAC register offset. + * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG, + * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST + * + * usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal) + */ +#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) + +#ifdef SK_LITTLE_ENDIAN +#define XM_WORD_LO 0 +#define XM_WORD_HI 1 +#else /* !SK_LITTLE_ENDIAN */ +#define XM_WORD_LO 1 +#define XM_WORD_HI 0 +#endif /* !SK_LITTLE_ENDIAN */ + + +/* + * macros to access the XMAC (GENESIS only) + * + * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD) + * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD) + * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT) + * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT) + * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK) + * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK) + * XM_INHASH(), to read the XM_HSM_CHK register + * XM_OUTHASH() to write the XM_HSM_CHK register + * + * para: + * Mac XMAC to access values: MAC_1 or MAC_2 + * IoC I/O context needed for SK I/O macros + * Reg XMAC Register to read or write + * (p)Val Value or pointer to the value which should be read or written + * + * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value); + */ + +#define XMA(Mac, Reg) \ + ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1)) + +#define XM_IN16(IoC, Mac, Reg, pVal) \ + SK_IN16((IoC), XMA((Mac), (Reg)), (pVal)) + +#define XM_OUT16(IoC, Mac, Reg, Val) \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (Val)) + +#define XM_IN32(IoC, Mac, Reg, pVal) { \ + SK_IN16((IoC), XMA((Mac), (Reg)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \ +} + +#define XM_OUT32(IoC, Mac, Reg, Val) { \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\ +} + +/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */ + +#define XM_INADDR(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff) | \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff) | \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff) | \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ +} + +#define XM_INHASH(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \ + pByte[6] = (SK_U8)(Word & 0x00ff); \ + pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff)| \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff)| \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff)| \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \ + (((SK_U16)(pByte[6]) & 0x00ff)| \ + (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ +} + +/* + * macros to access the GMAC (YUKON only) + * + * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT) + * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL) + * GM_IN32(), to read a 32 bit register (e.g. GM_) + * GM_OUT32(), to write a 32 bit register (e.g. GM_) + * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L) + * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L) + * GM_INHASH(), to read the GM_MC_ADDR_H1 register + * GM_OUTHASH() to write the GM_MC_ADDR_H1 register + * + * para: + * Mac GMAC to access values: MAC_1 or MAC_2 + * IoC I/O context needed for SK I/O macros + * Reg GMAC Register to read or write + * (p)Val Value or pointer to the value which should be read or written + * + * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value); + */ + +#define GMA(Mac, Reg) \ + ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg)) + +#define GM_IN16(IoC, Mac, Reg, pVal) \ + SK_IN16((IoC), GMA((Mac), (Reg)), (pVal)) + +#define GM_OUT16(IoC, Mac, Reg, Val) \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (Val)) + +#define GM_IN32(IoC, Mac, Reg, pVal) { \ + SK_IN16((IoC), GMA((Mac), (Reg)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \ +} + +#define GM_OUT32(IoC, Mac, Reg, Val) { \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\ +} + +#define GM_INADDR(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff) | \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff) | \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff) | \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ +} + +#define GM_INHASH(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \ + pByte[6] = (SK_U8)(Word & 0x00ff); \ + pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff)| \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff)| \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff)| \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \ + (((SK_U16)(pByte[6]) & 0x00ff)| \ + (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ +} + +/* + * Different MAC Types + */ +#define SK_MAC_XMAC 0 /* Xaqti XMAC II */ +#define SK_MAC_GMAC 1 /* Marvell GMAC */ + +/* + * Different PHY Types + */ +#define SK_PHY_XMAC 0 /* integrated in XMAC II */ +#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */ +#define SK_PHY_LONE 2 /* Level One LXT1000 */ +#define SK_PHY_NAT 3 /* National DP83891 */ +#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */ +#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */ + +/* + * PHY addresses (bits 12..8 of PHY address reg) + */ +#define PHY_ADDR_XMAC (0<<8) +#define PHY_ADDR_BCOM (1<<8) +#define PHY_ADDR_LONE (3<<8) +#define PHY_ADDR_NAT (0<<8) + +/* GPHY address (bits 15..11 of SMI control reg) */ +#define PHY_ADDR_MARV 0 + +/* + * macros to access the PHY + * + * PHY_READ() read a 16 bit value from the PHY + * PHY_WRITE() write a 16 bit value to the PHY + * + * para: + * IoC I/O context needed for SK I/O macros + * pPort Pointer to port struct for PhyAddr + * Mac XMAC to access values: MAC_1 or MAC_2 + * PhyReg PHY Register to read or write + * (p)Val Value or pointer to the value which should be read or + * written. + * + * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value); + * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never + * comes back. This is checked in DEBUG mode. + */ +#ifndef DEBUG +#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ + SK_U16 Mmu; \ + \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + } \ +} +#else +#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ + SK_U16 Mmu; \ + int __i = 0; \ + \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + __i++; \ + if (__i > 100000) { \ + SK_DBG_PRINTF("*****************************\n"); \ + SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \ + SK_DBG_PRINTF("*****************************\n"); \ + break; \ + } \ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + } \ +} +#endif /* DEBUG */ + +#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \ + SK_U16 Mmu; \ + \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ + } \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ + } \ +} + +/* + * Macro PCI_C() + * + * Use this macro to access PCI config register from the I/O space. + * + * para: + * Addr PCI configuration register to access. + * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG, + * + * usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal); + */ +#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */ + +/* + * Macro SK_HW_ADDR(Base, Addr) + * + * Calculates the effective HW address + * + * para: + * Base I/O or memory base address + * Addr Address offset + * + * usage: May be used in SK_INxx and SK_OUTxx macros + * #define SK_IN8(pAC, Addr, pVal) ...\ + * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr))) + */ +#ifdef SK_MEM_MAPPED_IO +#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr)) +#else /* SK_MEM_MAPPED_IO */ +#define SK_HW_ADDR(Base, Addr) \ + ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0))) +#endif /* SK_MEM_MAPPED_IO */ + +#define SZ_LONG (sizeof(SK_U32)) + +/* + * Macro SK_HWAC_LINK_LED() + * + * Use this macro to set the link LED mode. + * para: + * pAC Pointer to adapter context struct + * IoC I/O context needed for SK I/O macros + * Port Port number + * Mode Mode to set for this LED + */ +#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \ + SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode); + + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKGEHW_H */ diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h new file mode 100644 index 00000000000..e6b0016a695 --- /dev/null +++ b/drivers/net/sk98lin/h/skgehwt.h @@ -0,0 +1,48 @@ +/****************************************************************************** + * + * Name: skhwt.h + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.7 $ + * Date: $Date: 2003/09/16 12:55:08 $ + * Purpose: Defines for the hardware timer functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKGEHWT.H contains all defines and types for the timer functions + */ + +#ifndef _SKGEHWT_H_ +#define _SKGEHWT_H_ + +/* + * SK Hardware Timer + * - needed wherever the HWT module is used + * - use in Adapters context name pAC->Hwt + */ +typedef struct s_Hwt { + SK_U32 TStart; /* HWT start */ + SK_U32 TStop; /* HWT stop */ + int TActive; /* HWT: flag : active/inactive */ +} SK_HWT; + +extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc); +extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time); +extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc); +extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc); +extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc); +#endif /* _SKGEHWT_H_ */ diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h new file mode 100644 index 00000000000..d9b6f6d8dfe --- /dev/null +++ b/drivers/net/sk98lin/h/skgei2c.h @@ -0,0 +1,210 @@ +/****************************************************************************** + * + * Name: skgei2c.h + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.25 $ + * Date: $Date: 2003/10/20 09:06:05 $ + * Purpose: Special defines for TWSI + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling + */ + +#ifndef _INC_SKGEI2C_H_ +#define _INC_SKGEI2C_H_ + +/* + * Macros to access the B2_I2C_CTRL + */ +#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \ + SK_OUT32(IoC, B2_I2C_CTRL,\ + (flag ? 0x80000000UL : 0x0L) | \ + (((SK_U32)reg << 16) & I2C_ADDR) | \ + (((SK_U32)dev << 9) & I2C_DEV_SEL) | \ + (dev_size & I2C_DEV_SIZE) | \ + ((burst << 4) & I2C_BURST_LEN)) + +#define SK_I2C_STOP(IoC) { \ + SK_U32 I2cCtrl; \ + SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \ + SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \ +} + +#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl) + +/* + * Macros to access the TWSI SW Registers + */ +#define SK_I2C_SET_BIT(IoC, SetBits) { \ + SK_U8 OrgBits; \ + SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ + SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \ +} + +#define SK_I2C_CLR_BIT(IoC, ClrBits) { \ + SK_U8 OrgBits; \ + SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ + SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \ +} + +#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw) + +/* + * define the possible sensor states + */ +#define SK_SEN_IDLE 0 /* Idle: sensor not read */ +#define SK_SEN_VALUE 1 /* Value Read cycle */ +#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */ + +/* + * Conversion factor to convert read Voltage sensor to milli Volt + * Conversion factor to convert read Temperature sensor to 10th degree Celsius + */ +#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */ +#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */ +#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for ext. val. */ + +/* + * formula: counter = (22500*60)/(rpm * divisor * pulses/2) + * assuming: 6500rpm, 4 pulses, divisor 1 + */ +#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2)) + +/* + * Define sensor management data + * Maximum is reached on Genesis copper dual port and Yukon-64 + * Board specific maximum is in pAC->I2c.MaxSens + */ +#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */ +#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */ + +/* + * To watch the state machine (SM) use the timer in two ways + * instead of one as hitherto + */ +#define SK_TIMER_WATCH_SM 0 /* Watch the SM to finish in a spec. time */ +#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ + +/* + * Defines for the individual thresholds + */ + +/* Temperature sensor */ +#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */ +#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */ +#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */ +#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */ + +/* VCC which should be 5 V */ +#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ +#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */ +#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */ +#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */ + +/* + * VIO may be 5 V or 3.3 V. Initialization takes two parts: + * 1. Initialize lowest lower limit and highest higher limit. + * 2. After the first value is read correct the upper or the lower limit to + * the appropriate C constant. + * + * Warning limits are +-5% of the exepected voltage. + * Error limits are +-10% of the expected voltage. + */ + +/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */ + +#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */ +#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */ + /* 5000 mVolt */ +#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */ +#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */ + +#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */ + +/* correction values for the second pass */ +#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */ +#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */ + /* 3300 mVolt */ +#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */ +#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */ + +/* + * VDD voltage + */ +#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */ +#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */ +#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */ +#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */ + +/* + * PHY PLL 3V3 voltage + */ +#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */ +#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */ +#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */ +#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */ + +/* + * VAUX (YUKON only) + */ +#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */ +#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */ +#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */ +#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */ +#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */ +#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */ + +/* + * PHY 2V5 voltage + */ +#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */ +#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */ +#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */ +#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */ + +/* + * ASIC Core 1V5 voltage (YUKON only) + */ +#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */ +#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */ +#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */ +#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */ + +/* + * FAN 1 speed + */ +/* assuming: 6500rpm +-15%, 4 pulses, + * warning at: 80 % + * error at: 70 % + * no upper limit + */ +#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */ +#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */ +#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ +#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */ + +/* + * Some Voltages need dynamic thresholds + */ +#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */ +#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */ +#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */ + +extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen); +#endif /* n_INC_SKGEI2C_H */ diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h new file mode 100644 index 00000000000..143e635ec24 --- /dev/null +++ b/drivers/net/sk98lin/h/skgeinit.h @@ -0,0 +1,797 @@ +/****************************************************************************** + * + * Name: skgeinit.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.83 $ + * Date: $Date: 2003/09/16 14:07:37 $ + * Purpose: Structures and prototypes for the GE Init Module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKGEINIT_H_ +#define __INC_SKGEINIT_H_ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +#define SK_TEST_VAL 0x11335577UL + +/* modifying Link LED behaviour (used with SkGeLinkLED()) */ +#define SK_LNK_OFF LED_OFF +#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) +#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) +#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) + +/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */ +#define SK_LED_OFF LED_OFF +#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF) + +/* addressing LED Registers in SkGeXmitLED() */ +#define XMIT_LED_INI 0 +#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI) +#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI) +#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI) + +/* parameter 'Mode' when calling SkGeXmitLED() */ +#define SK_LED_DIS 0 +#define SK_LED_ENA 1 +#define SK_LED_TST 2 + +/* Counter and Timer constants, for a host clock of 62.5 MHz */ +#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */ +#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */ + +#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */ + +#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */ + /* 215 ms at 78.12 MHz */ + +#define SK_FACT_62 100 /* is given in percent */ +#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ +#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ + +/* Timeout values */ +#define SK_MAC_TO_53 72 /* MAC arbiter timeout */ +#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ +#define SK_PKT_TO_MAX 0xffff /* Maximum value */ +#define SK_RI_TO_53 36 /* RAM interface timeout */ + +#define SK_PHY_ACC_TO 600000 /* PHY access timeout */ + +/* RAM Buffer High Pause Threshold values */ +#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */ +#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ +#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ + +#ifndef SK_BMU_RX_WM +#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ +#endif +#ifndef SK_BMU_TX_WM +#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ +#endif + +/* XMAC II Rx High Watermark */ +#define SK_XM_RX_HI_WM 0x05aa /* 1450 */ + +/* XMAC II Tx Threshold */ +#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */ +#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */ +#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */ +#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */ + +/* values for GIPortUsage */ +#define SK_RED_LINK 1 /* redundant link usage */ +#define SK_MUL_LINK 2 /* multiple link usage */ +#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */ + +/* Minimum RAM Buffer Rx Queue Size */ +#define SK_MIN_RXQ_SIZE 16 /* 16 kB */ + +/* Minimum RAM Buffer Tx Queue Size */ +#define SK_MIN_TXQ_SIZE 16 /* 16 kB */ + +/* Queue Size units */ +#define QZ_UNITS 0x7 +#define QZ_STEP 8 + +/* Percentage of queue size from whole memory */ +/* 80 % for receive */ +#define RAM_QUOTA_RX 80L +/* 0% for sync transfer */ +#define RAM_QUOTA_SYNC 0L +/* the rest (20%) is taken for async transfer */ + +/* Get the rounded queue size in Bytes in 8k steps */ +#define ROUND_QUEUE_SIZE(SizeInBytes) \ + ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \ + ~(QZ_STEP-1)) + +/* Get the rounded queue size in KBytes in 8k steps */ +#define ROUND_QUEUE_SIZE_KB(Kilobytes) \ + ROUND_QUEUE_SIZE((Kilobytes) * 1024L) + +/* Types of RAM Buffer Queues */ +#define SK_RX_SRAM_Q 1 /* small receive queue */ +#define SK_RX_BRAM_Q 2 /* big receive queue */ +#define SK_TX_RAM_Q 3 /* small or big transmit queue */ + +/* parameter 'Dir' when calling SkGeStopPort() */ +#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */ +#define SK_STOP_RX 2 /* Stops the receive path */ +#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */ + +/* parameter 'RstMode' when calling SkGeStopPort() */ +#define SK_SOFT_RST 1 /* perform a software reset */ +#define SK_HARD_RST 2 /* perform a hardware reset */ + +/* Init Levels */ +#define SK_INIT_DATA 0 /* Init level 0: init data structures */ +#define SK_INIT_IO 1 /* Init level 1: init with IOs */ +#define SK_INIT_RUN 2 /* Init level 2: init for run time */ + +/* Link Mode Parameter */ +#define SK_LMODE_HALF 1 /* Half Duplex Mode */ +#define SK_LMODE_FULL 2 /* Full Duplex Mode */ +#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */ +#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */ +#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */ +#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */ +#define SK_LMODE_INDETERMINATED 7 /* indeterminated */ + +/* Auto-negotiation timeout in 100ms granularity */ +#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */ + +/* Auto-negotiation error codes */ +#define SK_AND_OK 0 /* no error */ +#define SK_AND_OTHER 1 /* other error than below */ +#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */ + + +/* Link Speed Capabilities */ +#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */ +#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */ +#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */ +#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */ +#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */ + +/* Link Speed Parameter */ +#define SK_LSPEED_AUTO 1 /* Automatic resolution */ +#define SK_LSPEED_10MBPS 2 /* 10 Mbps */ +#define SK_LSPEED_100MBPS 3 /* 100 Mbps */ +#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */ +#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */ + +/* Link Speed Current State */ +#define SK_LSPEED_STAT_UNKNOWN 1 +#define SK_LSPEED_STAT_10MBPS 2 +#define SK_LSPEED_STAT_100MBPS 3 +#define SK_LSPEED_STAT_1000MBPS 4 +#define SK_LSPEED_STAT_INDETERMINATED 5 + + +/* Link Capability Parameter */ +#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */ +#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */ +#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */ +#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */ +#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */ + +/* Link Mode Current State */ +#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */ +#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */ +#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */ +#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */ +#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */ +#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */ + +/* Flow Control Mode Parameter (and capabilities) */ +#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */ +#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */ +#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */ +#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or + * just the remote station may send PAUSE + */ +#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */ + +/* Flow Control Status Parameter */ +#define SK_FLOW_STAT_NONE 1 /* No Flow Control */ +#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */ +#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */ +#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */ +#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */ + +/* Master/Slave Mode Capabilities */ +#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */ +#define SK_MS_CAP_MASTER (1<<1) /* This station is master */ +#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */ +#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */ + +/* Set Master/Slave Mode Parameter (and capabilities) */ +#define SK_MS_MODE_AUTO 1 /* Automatic resolution */ +#define SK_MS_MODE_MASTER 2 /* This station is master */ +#define SK_MS_MODE_SLAVE 3 /* This station is slave */ +#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */ + +/* Master/Slave Status Parameter */ +#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */ +#define SK_MS_STAT_MASTER 2 /* This station is master */ +#define SK_MS_STAT_SLAVE 3 /* This station is slave */ +#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */ +#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */ + +/* parameter 'Mode' when calling SkXmSetRxCmd() */ +#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */ +#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */ +#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */ +#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */ +#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ +#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ +#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ +#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ +#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ +#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ + +/* parameter 'Para' when calling SkMacSetRxTxEn() */ +#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */ +#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */ +#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */ +#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */ +#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */ +#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */ + +/* States of PState */ +#define SK_PRT_RESET 0 /* the port is reset */ +#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */ +#define SK_PRT_INIT 2 /* the port is initialized */ +#define SK_PRT_RUN 3 /* the port has an active link */ + +/* PHY power down modes */ +#define PHY_PM_OPERATIONAL_MODE 0 /* PHY operational mode */ +#define PHY_PM_DEEP_SLEEP 1 /* coma mode --> minimal power */ +#define PHY_PM_IEEE_POWER_DOWN 2 /* IEEE 22.2.4.1.5 compl. power down */ +#define PHY_PM_ENERGY_DETECT 3 /* energy detect */ +#define PHY_PM_ENERGY_DETECT_PLUS 4 /* energy detect plus */ + +/* Default receive frame limit for Workaround of XMAC Errata */ +#define SK_DEF_RX_WA_LIM SK_CONSTU64(100) + +/* values for GILedBlinkCtrl (LED Blink Control) */ +#define SK_ACT_LED_BLINK (1<<0) /* Active LED blinking */ +#define SK_DUP_LED_NORMAL (1<<1) /* Duplex LED normal */ +#define SK_LED_LINK100_ON (1<<2) /* Link 100M LED on */ + +/* Link Partner Status */ +#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */ +#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */ +#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */ + +/* Maximum Restarts before restart is ignored (3Com WA) */ +#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */ + +/* Max. Auto-neg. timeouts before link detection in sense mode is reset */ +#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */ + +/* structures *****************************************************************/ + +/* + * MAC specific functions + */ +typedef struct s_GeMacFunc { + int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); + int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, + SK_U16 StatAddr, SK_U32 SK_FAR *pVal); + int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); + int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, + SK_U16 IStatus, SK_U64 SK_FAR *pVal); +} SK_GEMACFUNC; + +/* + * Port Structure + */ +typedef struct s_GePort { +#ifndef SK_DIAG + SK_TIMER PWaTimer; /* Workaround Timer */ + SK_TIMER HalfDupChkTimer; +#endif /* SK_DIAG */ + SK_U32 PPrevShorts; /* Previous Short Counter checking */ + SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */ + SK_U64 PPrevRx; /* Previous RxOk Counter checking */ + SK_U64 PRxLim; /* Previous RxOk Counter checking */ + SK_U64 LastOctets; /* For half duplex hang check */ + int PLinkResCt; /* Link Restart Counter */ + int PAutoNegTimeOut;/* Auto-negotiation timeout current value */ + int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */ + int PRxQSize; /* Port Rx Queue Size in kB */ + int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */ + int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */ + SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */ + SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */ + SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */ + SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */ + SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */ + SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */ + SK_U32 PRxOverCnt; /* Receive Overflow Counter */ + int PRxQOff; /* Rx Queue Address Offset */ + int PXsQOff; /* Synchronous Tx Queue Address Offset */ + int PXaQOff; /* Asynchronous Tx Queue Address Offset */ + int PhyType; /* PHY used on this port */ + int PState; /* Port status (reset, stop, init, run) */ + SK_U16 PhyId1; /* PHY Id1 on this port */ + SK_U16 PhyAddr; /* MDIO/MDC PHY address */ + SK_U16 PIsave; /* Saved Interrupt status word */ + SK_U16 PSsave; /* Saved PHY status word */ + SK_U16 PGmANegAdv; /* Saved GPhy AutoNegAdvertisment register */ + SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */ + SK_BOOL PLinkBroken; /* Is Link broken ? */ + SK_BOOL PCheckPar; /* Do we check for parity errors ? */ + SK_BOOL HalfDupTimerActive; + SK_U8 PLinkCap; /* Link Capabilities */ + SK_U8 PLinkModeConf; /* Link Mode configured */ + SK_U8 PLinkMode; /* Link Mode currently used */ + SK_U8 PLinkModeStatus;/* Link Mode Status */ + SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */ + SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */ + SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */ + SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */ + SK_U8 PFlowCtrlMode; /* Flow Control Mode */ + SK_U8 PFlowCtrlStatus;/* Flow Control Status */ + SK_U8 PMSCap; /* Master/Slave Capabilities */ + SK_U8 PMSMode; /* Master/Slave Mode */ + SK_U8 PMSStatus; /* Master/Slave Status */ + SK_BOOL PAutoNegFail; /* Auto-negotiation fail flag */ + SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */ + SK_U8 PCableLen; /* Cable Length */ + SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */ + SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */ + SK_U8 PPhyPowerState; /* PHY current power state */ + int PMacColThres; /* MAC Collision Threshold */ + int PMacJamLen; /* MAC Jam length */ + int PMacJamIpgVal; /* MAC Jam IPG */ + int PMacJamIpgData; /* MAC IPG Jam to Data */ + int PMacIpgData; /* MAC Data IPG */ + SK_BOOL PMacLimit4; /* reset collision counter and backoff algorithm */ +} SK_GEPORT; + +/* + * Gigabit Ethernet Initialization Struct + * (has to be included in the adapter context) + */ +typedef struct s_GeInit { + int GIChipId; /* Chip Identification Number */ + int GIChipRev; /* Chip Revision Number */ + SK_U8 GIPciHwRev; /* PCI HW Revision Number */ + SK_BOOL GIGenesis; /* Genesis adapter ? */ + SK_BOOL GIYukon; /* YUKON-A1/Bx chip */ + SK_BOOL GIYukonLite; /* YUKON-Lite chip */ + SK_BOOL GICopperType; /* Copper Type adapter ? */ + SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */ + SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */ + SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */ + SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */ + SK_U16 GILedBlinkCtrl; /* LED Blink Control */ + int GIMacsFound; /* Number of MACs found on this adapter */ + int GIMacType; /* MAC Type used on this adapter */ + int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */ + int GIPortUsage; /* Driver Port Usage */ + int GILevel; /* Initialization Level completed */ + int GIRamSize; /* The RAM size of the adapter in kB */ + int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */ + SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */ + SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */ + SK_U32 GIValIrqMask; /* Value for Interrupt Mask */ + SK_U32 GITimeStampCnt; /* Time Stamp High Counter (YUKON only) */ + SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */ + SK_GEMACFUNC GIFunc; /* MAC depedent functions */ +} SK_GEINIT; + +/* + * Error numbers and messages for skxmac2.c and skgeinit.c + */ +#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT) +#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters" +#define SKERR_HWI_E002 (SKERR_HWI_E001+1) +#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing" +#define SKERR_HWI_E003 (SKERR_HWI_E002+1) +#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level" +#define SKERR_HWI_E004 (SKERR_HWI_E003+1) +#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured" +#define SKERR_HWI_E005 (SKERR_HWI_E004+1) +#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports" +#define SKERR_HWI_E006 (SKERR_HWI_E005+1) +#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state" +#define SKERR_HWI_E007 (SKERR_HWI_E006+1) +#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode" +#define SKERR_HWI_E008 (SKERR_HWI_E007+1) +#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode" +#define SKERR_HWI_E009 (SKERR_HWI_E008+1) +#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero" +#define SKERR_HWI_E010 (SKERR_HWI_E009+1) +#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters" +#define SKERR_HWI_E011 (SKERR_HWI_E010+1) +#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small" +#define SKERR_HWI_E012 (SKERR_HWI_E011+1) +#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified" +#define SKERR_HWI_E013 (SKERR_HWI_E012+1) +#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue" +#define SKERR_HWI_E014 (SKERR_HWI_E013+1) +#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified" +#define SKERR_HWI_E015 (SKERR_HWI_E014+1) +#define SKERR_HWI_E015MSG "Illegal Link mode parameter" +#define SKERR_HWI_E016 (SKERR_HWI_E015+1) +#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter" +#define SKERR_HWI_E017 (SKERR_HWI_E016+1) +#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal" +#define SKERR_HWI_E018 (SKERR_HWI_E017+1) +#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)" +#define SKERR_HWI_E019 (SKERR_HWI_E018+1) +#define SKERR_HWI_E019MSG "Illegal Speed parameter" +#define SKERR_HWI_E020 (SKERR_HWI_E019+1) +#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter" +#define SKERR_HWI_E021 (SKERR_HWI_E020+1) +#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter" +#define SKERR_HWI_E022 (SKERR_HWI_E021+1) +#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address" +#define SKERR_HWI_E023 (SKERR_HWI_E022+1) +#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small" +#define SKERR_HWI_E024 (SKERR_HWI_E023+1) +#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)" +#define SKERR_HWI_E025 (SKERR_HWI_E024+1) +#define SKERR_HWI_E025MSG "" + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO + +/* + * public functions in skgeinit.c + */ +extern void SkGePollTxD( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL PollTxD); + +extern void SkGeYellowLED( + SK_AC *pAC, + SK_IOC IoC, + int State); + +extern int SkGeCfgSync( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U32 IntTime, + SK_U32 LimCount, + int SyncMode); + +extern void SkGeLoadLnkSyncCnt( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U32 CntVal); + +extern void SkGeStopPort( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Dir, + int RstMode); + +extern int SkGeInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern void SkGeDeInit( + SK_AC *pAC, + SK_IOC IoC); + +extern int SkGeInitPort( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkGeXmitLED( + SK_AC *pAC, + SK_IOC IoC, + int Led, + int Mode); + +extern int SkGeInitAssignRamToQueues( + SK_AC *pAC, + int ActivePort, + SK_BOOL DualNet); + +/* + * public functions in skxmac2.c + */ +extern void SkMacRxTxDisable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacSoftRst( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacHardRst( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkXmInitMac( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkGmInitMac( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacInitPhy( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL DoLoop); + +extern void SkMacIrqDisable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacFlushTxFifo( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacIrq( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern int SkMacAutoNegDone( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacAutoNegLipaPhy( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U16 IStatus); + +extern int SkMacRxTxEnable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacPromiscMode( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); + +extern void SkMacHashing( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); + +extern void SkXmPhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 SK_FAR *pVal); + +extern void SkXmPhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkGmPhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 SK_FAR *pVal); + +extern void SkGmPhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkXmClrExactAddr( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int StartNum, + int StopNum); + +extern void SkXmAutoNegLipaXmac( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U16 IStatus); + +extern int SkXmUpdateStats( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkGmUpdateStats( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkXmMacStatistic( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 StatAddr, + SK_U32 SK_FAR *pVal); + +extern int SkGmMacStatistic( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 StatAddr, + SK_U32 SK_FAR *pVal); + +extern int SkXmResetCounter( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkGmResetCounter( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkXmOverflowStatus( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 IStatus, + SK_U64 SK_FAR *pStatus); + +extern int SkGmOverflowStatus( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 MacStatus, + SK_U64 SK_FAR *pStatus); + +extern int SkGmCableDiagStatus( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL StartTest); + +#ifdef SK_DIAG +extern void SkGePhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 *pVal); + +extern void SkGePhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkMacSetRxCmd( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Mode); +extern void SkMacCrcGener( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +extern void SkMacTimeStamp( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +extern void SkXmSendCont( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +#endif /* SK_DIAG */ + +#else /* SK_KR_PROTO */ + +/* + * public functions in skgeinit.c + */ +extern void SkGePollTxD(); +extern void SkGeYellowLED(); +extern int SkGeCfgSync(); +extern void SkGeLoadLnkSyncCnt(); +extern void SkGeStopPort(); +extern int SkGeInit(); +extern void SkGeDeInit(); +extern int SkGeInitPort(); +extern void SkGeXmitLED(); +extern int SkGeInitAssignRamToQueues(); + +/* + * public functions in skxmac2.c + */ +extern void SkMacRxTxDisable(); +extern void SkMacSoftRst(); +extern void SkMacHardRst(); +extern void SkMacInitPhy(); +extern int SkMacRxTxEnable(); +extern void SkMacPromiscMode(); +extern void SkMacHashing(); +extern void SkMacIrqDisable(); +extern void SkMacFlushTxFifo(); +extern void SkMacIrq(); +extern int SkMacAutoNegDone(); +extern void SkMacAutoNegLipaPhy(); +extern void SkXmInitMac(); +extern void SkXmPhyRead(); +extern void SkXmPhyWrite(); +extern void SkGmInitMac(); +extern void SkGmPhyRead(); +extern void SkGmPhyWrite(); +extern void SkXmClrExactAddr(); +extern void SkXmAutoNegLipaXmac(); +extern int SkXmUpdateStats(); +extern int SkGmUpdateStats(); +extern int SkXmMacStatistic(); +extern int SkGmMacStatistic(); +extern int SkXmResetCounter(); +extern int SkGmResetCounter(); +extern int SkXmOverflowStatus(); +extern int SkGmOverflowStatus(); +extern int SkGmCableDiagStatus(); + +#ifdef SK_DIAG +extern void SkGePhyRead(); +extern void SkGePhyWrite(); +extern void SkMacSetRxCmd(); +extern void SkMacCrcGener(); +extern void SkMacTimeStamp(); +extern void SkXmSendCont(); +#endif /* SK_DIAG */ + +#endif /* SK_KR_PROTO */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKGEINIT_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h new file mode 100644 index 00000000000..ddd304f1a48 --- /dev/null +++ b/drivers/net/sk98lin/h/skgepnm2.h @@ -0,0 +1,334 @@ +/***************************************************************************** + * + * Name: skgepnm2.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.36 $ + * Date: $Date: 2003/05/23 12:45:13 $ + * Purpose: Defines for Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _SKGEPNM2_H_ +#define _SKGEPNM2_H_ + +/* + * General definitions + */ +#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */ +#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */ + +#define SK_PNMI_BUS_PCI 1 /* PCI bus*/ + +/* + * Actions + */ +#define SK_PNMI_ACT_IDLE 1 +#define SK_PNMI_ACT_RESET 2 +#define SK_PNMI_ACT_SELFTEST 3 +#define SK_PNMI_ACT_RESETCNT 4 + +/* + * VPD releated defines + */ + +#define SK_PNMI_VPD_RW 1 +#define SK_PNMI_VPD_RO 2 + +#define SK_PNMI_VPD_OK 0 +#define SK_PNMI_VPD_NOTFOUND 1 +#define SK_PNMI_VPD_CUT 2 +#define SK_PNMI_VPD_TIMEOUT 3 +#define SK_PNMI_VPD_FULL 4 +#define SK_PNMI_VPD_NOWRITE 5 +#define SK_PNMI_VPD_FATAL 6 + +#define SK_PNMI_VPD_IGNORE 0 +#define SK_PNMI_VPD_CREATE 1 +#define SK_PNMI_VPD_DELETE 2 + + +/* + * RLMT related defines + */ +#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */ + + +/* + * VCT internal status values + */ +#define SK_PNMI_VCT_PENDING 32 +#define SK_PNMI_VCT_TEST_DONE 64 +#define SK_PNMI_VCT_LINK 128 + +/* + * Internal table definitions + */ +#define SK_PNMI_GET 0 +#define SK_PNMI_PRESET 1 +#define SK_PNMI_SET 2 + +#define SK_PNMI_RO 0 +#define SK_PNMI_RW 1 +#define SK_PNMI_WO 2 + +typedef struct s_OidTabEntry { + SK_U32 Id; + SK_U32 InstanceNo; + unsigned int StructSize; + unsigned int Offset; + int Access; + int (* Func)(SK_AC *pAc, SK_IOC pIo, int action, + SK_U32 Id, char* pBuf, unsigned int* pLen, + SK_U32 Instance, unsigned int TableIndex, + SK_U32 NetNumber); + SK_U16 Param; +} SK_PNMI_TAB_ENTRY; + + +/* + * Trap lengths + */ +#define SK_PNMI_TRAP_SIMPLE_LEN 17 +#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46 +#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23 +#define SK_PNMI_TRAP_RLMT_PORT_LEN 23 + +/* + * Number of MAC types supported + */ +#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1) + +/* + * MAC statistic data list (overall set for MAC types used) + */ +enum SK_MACSTATS { + SK_PNMI_HTX = 0, + SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETLOW, + SK_PNMI_HTX_BROADCAST, + SK_PNMI_HTX_MULTICAST, + SK_PNMI_HTX_UNICAST, + SK_PNMI_HTX_BURST, + SK_PNMI_HTX_PMACC, + SK_PNMI_HTX_MACC, + SK_PNMI_HTX_COL, + SK_PNMI_HTX_SINGLE_COL, + SK_PNMI_HTX_MULTI_COL, + SK_PNMI_HTX_EXCESS_COL, + SK_PNMI_HTX_LATE_COL, + SK_PNMI_HTX_DEFFERAL, + SK_PNMI_HTX_EXCESS_DEF, + SK_PNMI_HTX_UNDERRUN, + SK_PNMI_HTX_CARRIER, + SK_PNMI_HTX_UTILUNDER, + SK_PNMI_HTX_UTILOVER, + SK_PNMI_HTX_64, + SK_PNMI_HTX_127, + SK_PNMI_HTX_255, + SK_PNMI_HTX_511, + SK_PNMI_HTX_1023, + SK_PNMI_HTX_MAX, + SK_PNMI_HTX_LONGFRAMES, + SK_PNMI_HTX_SYNC, + SK_PNMI_HTX_SYNC_OCTET, + SK_PNMI_HTX_RESERVED, + + SK_PNMI_HRX, + SK_PNMI_HRX_OCTET, + SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET, + SK_PNMI_HRX_OCTETLOW, + SK_PNMI_HRX_BADOCTET, + SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET, + SK_PNMI_HRX_BADOCTETLOW, + SK_PNMI_HRX_BROADCAST, + SK_PNMI_HRX_MULTICAST, + SK_PNMI_HRX_UNICAST, + SK_PNMI_HRX_PMACC, + SK_PNMI_HRX_MACC, + SK_PNMI_HRX_PMACC_ERR, + SK_PNMI_HRX_MACC_UNKWN, + SK_PNMI_HRX_BURST, + SK_PNMI_HRX_MISSED, + SK_PNMI_HRX_FRAMING, + SK_PNMI_HRX_UNDERSIZE, + SK_PNMI_HRX_OVERFLOW, + SK_PNMI_HRX_JABBER, + SK_PNMI_HRX_CARRIER, + SK_PNMI_HRX_IRLENGTH, + SK_PNMI_HRX_SYMBOL, + SK_PNMI_HRX_SHORTS, + SK_PNMI_HRX_RUNT, + SK_PNMI_HRX_TOO_LONG, + SK_PNMI_HRX_FCS, + SK_PNMI_HRX_CEXT, + SK_PNMI_HRX_UTILUNDER, + SK_PNMI_HRX_UTILOVER, + SK_PNMI_HRX_64, + SK_PNMI_HRX_127, + SK_PNMI_HRX_255, + SK_PNMI_HRX_511, + SK_PNMI_HRX_1023, + SK_PNMI_HRX_MAX, + SK_PNMI_HRX_LONGFRAMES, + + SK_PNMI_HRX_RESERVED, + + SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */ +}; + +/* + * MAC specific data + */ +typedef struct s_PnmiStatAddr { + SK_U16 Reg; /* MAC register containing the value */ + SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/ +} SK_PNMI_STATADDR; + + +/* + * SK_PNMI_STRUCT_DATA copy offset evaluation macros + */ +#define SK_PNMI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) +#define SK_PNMI_MAI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) +#define SK_PNMI_VPD_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e)) +#define SK_PNMI_SEN_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e)) +#define SK_PNMI_CHK_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e)) +#define SK_PNMI_STA_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e)) +#define SK_PNMI_CNF_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e)) +#define SK_PNMI_RLM_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e)) +#define SK_PNMI_MON_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e)) +#define SK_PNMI_TRP_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e)) + +#define SK_PNMI_SET_STAT(b,s,o) {SK_U32 Val32; char *pVal; \ + Val32 = (s); \ + pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ + &(((SK_PNMI_STRUCT_DATA *)0)-> \ + ReturnStatus.ErrorStatus)); \ + SK_PNMI_STORE_U32(pVal, Val32); \ + Val32 = (o); \ + pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ + &(((SK_PNMI_STRUCT_DATA *)0)-> \ + ReturnStatus.ErrorOffset)); \ + SK_PNMI_STORE_U32(pVal, Val32);} + +/* + * Time macros + */ +#ifndef SK_PNMI_HUNDREDS_SEC +#if SK_TICKS_PER_SEC == 100 +#define SK_PNMI_HUNDREDS_SEC(t) (t) +#else +#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC)) +#endif /* !SK_TICKS_PER_SEC */ +#endif /* !SK_PNMI_HUNDREDS_SEC */ + +/* + * Macros to work around alignment problems + */ +#ifndef SK_PNMI_STORE_U16 +#define SK_PNMI_STORE_U16(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1);} +#endif + +#ifndef SK_PNMI_STORE_U32 +#define SK_PNMI_STORE_U32(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1); \ + *((char *)(p) + 2) = \ + *(((char *)&(v)) + 2); \ + *((char *)(p) + 3) = \ + *(((char *)&(v)) + 3);} +#endif + +#ifndef SK_PNMI_STORE_U64 +#define SK_PNMI_STORE_U64(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1); \ + *((char *)(p) + 2) = \ + *(((char *)&(v)) + 2); \ + *((char *)(p) + 3) = \ + *(((char *)&(v)) + 3); \ + *((char *)(p) + 4) = \ + *(((char *)&(v)) + 4); \ + *((char *)(p) + 5) = \ + *(((char *)&(v)) + 5); \ + *((char *)(p) + 6) = \ + *(((char *)&(v)) + 6); \ + *((char *)(p) + 7) = \ + *(((char *)&(v)) + 7);} +#endif + +#ifndef SK_PNMI_READ_U16 +#define SK_PNMI_READ_U16(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1);} +#endif + +#ifndef SK_PNMI_READ_U32 +#define SK_PNMI_READ_U32(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1); \ + *(((char *)&(v)) + 2) = \ + *((char *)(p) + 2); \ + *(((char *)&(v)) + 3) = \ + *((char *)(p) + 3);} +#endif + +#ifndef SK_PNMI_READ_U64 +#define SK_PNMI_READ_U64(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1); \ + *(((char *)&(v)) + 2) = \ + *((char *)(p) + 2); \ + *(((char *)&(v)) + 3) = \ + *((char *)(p) + 3); \ + *(((char *)&(v)) + 4) = \ + *((char *)(p) + 4); \ + *(((char *)&(v)) + 5) = \ + *((char *)(p) + 5); \ + *(((char *)&(v)) + 6) = \ + *((char *)(p) + 6); \ + *(((char *)&(v)) + 7) = \ + *((char *)(p) + 7);} +#endif + +/* + * Macros for Debug + */ +#ifdef DEBUG + +#define SK_PNMI_CHECKFLAGS(vSt) {if (pAC->Pnmi.MacUpdatedFlag > 0 || \ + pAC->Pnmi.RlmtUpdatedFlag > 0 || \ + pAC->Pnmi.SirqUpdatedFlag > 0) { \ + SK_DBG_MSG(pAC, \ + SK_DBGMOD_PNMI, \ + SK_DBGCAT_CTRL, \ + ("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \ + vSt, \ + pAC->Pnmi.MacUpdatedFlag, \ + pAC->Pnmi.RlmtUpdatedFlag, \ + pAC->Pnmi.SirqUpdatedFlag))}} + +#else /* !DEBUG */ + +#define SK_PNMI_CHECKFLAGS(vSt) /* Nothing */ + +#endif /* !DEBUG */ + +#endif /* _SKGEPNM2_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h new file mode 100644 index 00000000000..1ed214ccb25 --- /dev/null +++ b/drivers/net/sk98lin/h/skgepnmi.h @@ -0,0 +1,962 @@ +/***************************************************************************** + * + * Name: skgepnmi.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.62 $ + * Date: $Date: 2003/08/15 12:31:52 $ + * Purpose: Defines for Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _SKGEPNMI_H_ +#define _SKGEPNMI_H_ + +/* + * Include dependencies + */ +#include "h/sktypes.h" +#include "h/skerror.h" +#include "h/sktimer.h" +#include "h/ski2c.h" +#include "h/skaddr.h" +#include "h/skrlmt.h" +#include "h/skvpd.h" + +/* + * Management Database Version + */ +#define SK_PNMI_MDB_VERSION 0x00030001 /* 3.1 */ + + +/* + * Event definitions + */ +#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */ +#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */ +#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */ +#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */ +#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */ +#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */ +#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */ + +#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */ +#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets + 1 = single net; 2 = dual net */ +#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */ + + +/* + * Return values + */ +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_GENERAL 1 +#define SK_PNMI_ERR_TOO_SHORT 2 +#define SK_PNMI_ERR_BAD_VALUE 3 +#define SK_PNMI_ERR_READ_ONLY 4 +#define SK_PNMI_ERR_UNKNOWN_OID 5 +#define SK_PNMI_ERR_UNKNOWN_INST 6 +#define SK_PNMI_ERR_UNKNOWN_NET 7 +#define SK_PNMI_ERR_NOT_SUPPORTED 10 + + +/* + * Return values of driver reset function SK_DRIVER_RESET() and + * driver event function SK_DRIVER_EVENT() + */ +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_FAIL 1 + + +/* + * Return values of driver test function SK_DRIVER_SELFTEST() + */ +#define SK_PNMI_TST_UNKNOWN (1 << 0) +#define SK_PNMI_TST_TRANCEIVER (1 << 1) +#define SK_PNMI_TST_ASIC (1 << 2) +#define SK_PNMI_TST_SENSOR (1 << 3) +#define SK_PNMI_TST_POWERMGMT (1 << 4) +#define SK_PNMI_TST_PCI (1 << 5) +#define SK_PNMI_TST_MAC (1 << 6) + + +/* + * RLMT specific definitions + */ +#define SK_PNMI_RLMT_STATUS_STANDBY 1 +#define SK_PNMI_RLMT_STATUS_ACTIVE 2 +#define SK_PNMI_RLMT_STATUS_ERROR 3 + +#define SK_PNMI_RLMT_LSTAT_PHY_DOWN 1 +#define SK_PNMI_RLMT_LSTAT_AUTONEG 2 +#define SK_PNMI_RLMT_LSTAT_LOG_DOWN 3 +#define SK_PNMI_RLMT_LSTAT_LOG_UP 4 +#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5 + +#define SK_PNMI_RLMT_MODE_CHK_LINK (SK_RLMT_CHECK_LINK) +#define SK_PNMI_RLMT_MODE_CHK_RX (SK_RLMT_CHECK_LOC_LINK) +#define SK_PNMI_RLMT_MODE_CHK_SPT (SK_RLMT_CHECK_SEG) +/* #define SK_PNMI_RLMT_MODE_CHK_EX */ + +/* + * OID definition + */ +#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */ + +#define OID_GEN_XMIT_OK 0x00020101 +#define OID_GEN_RCV_OK 0x00020102 +#define OID_GEN_XMIT_ERROR 0x00020103 +#define OID_GEN_RCV_ERROR 0x00020104 +#define OID_GEN_RCV_NO_BUFFER 0x00020105 + +/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */ +#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 +/* #define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 */ +#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204 +/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */ +#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 +/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */ +#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 +/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */ +#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A +/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */ +#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C +#define OID_GEN_RCV_CRC_ERROR 0x0002020D +#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E + +#define OID_802_3_PERMANENT_ADDRESS 0x01010101 +#define OID_802_3_CURRENT_ADDRESS 0x01010102 +/* #define OID_802_3_MULTICAST_LIST 0x01010103 */ +/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ +/* #define OID_802_3_MAC_OPTIONS 0x01010105 */ + +#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 +#define OID_802_3_XMIT_ONE_COLLISION 0x01020102 +#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 +#define OID_802_3_XMIT_DEFERRED 0x01020201 +#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 +#define OID_802_3_RCV_OVERRUN 0x01020203 +#define OID_802_3_XMIT_UNDERRUN 0x01020204 +#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 +#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 + +/* + * PnP and PM OIDs + */ +#ifdef SK_POWER_MGMT +#define OID_PNP_CAPABILITIES 0xFD010100 +#define OID_PNP_SET_POWER 0xFD010101 +#define OID_PNP_QUERY_POWER 0xFD010102 +#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 +#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 +#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 +#endif /* SK_POWER_MGMT */ + +#endif /* _NDIS_ */ + +#define OID_SKGE_MDB_VERSION 0xFF010100 +#define OID_SKGE_SUPPORTED_LIST 0xFF010101 +#define OID_SKGE_VPD_FREE_BYTES 0xFF010102 +#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103 +#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104 +#define OID_SKGE_VPD_KEY 0xFF010105 +#define OID_SKGE_VPD_VALUE 0xFF010106 +#define OID_SKGE_VPD_ACCESS 0xFF010107 +#define OID_SKGE_VPD_ACTION 0xFF010108 + +#define OID_SKGE_PORT_NUMBER 0xFF010110 +#define OID_SKGE_DEVICE_TYPE 0xFF010111 +#define OID_SKGE_DRIVER_DESCR 0xFF010112 +#define OID_SKGE_DRIVER_VERSION 0xFF010113 +#define OID_SKGE_HW_DESCR 0xFF010114 +#define OID_SKGE_HW_VERSION 0xFF010115 +#define OID_SKGE_CHIPSET 0xFF010116 +#define OID_SKGE_ACTION 0xFF010117 +#define OID_SKGE_RESULT 0xFF010118 +#define OID_SKGE_BUS_TYPE 0xFF010119 +#define OID_SKGE_BUS_SPEED 0xFF01011A +#define OID_SKGE_BUS_WIDTH 0xFF01011B +/* 0xFF01011C unused */ +#define OID_SKGE_DIAG_ACTION 0xFF01011D +#define OID_SKGE_DIAG_RESULT 0xFF01011E +#define OID_SKGE_MTU 0xFF01011F +#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120 +#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121 +#define OID_SKGE_PMD 0xFF010122 +#define OID_SKGE_CONNECTOR 0xFF010123 +#define OID_SKGE_LINK_CAP 0xFF010124 +#define OID_SKGE_LINK_MODE 0xFF010125 +#define OID_SKGE_LINK_MODE_STATUS 0xFF010126 +#define OID_SKGE_LINK_STATUS 0xFF010127 +#define OID_SKGE_FLOWCTRL_CAP 0xFF010128 +#define OID_SKGE_FLOWCTRL_MODE 0xFF010129 +#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A +#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B +#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C +#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D +#define OID_SKGE_MULTICAST_LIST 0xFF01012E +#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F + +#define OID_SKGE_TRAP 0xFF010130 +#define OID_SKGE_TRAP_NUMBER 0xFF010131 + +#define OID_SKGE_RLMT_MODE 0xFF010140 +#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141 +#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142 +#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143 +#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160 + +#define OID_SKGE_SPEED_CAP 0xFF010170 +#define OID_SKGE_SPEED_MODE 0xFF010171 +#define OID_SKGE_SPEED_STATUS 0xFF010172 + +#define OID_SKGE_BOARDLEVEL 0xFF010180 + +#define OID_SKGE_SENSOR_NUMBER 0xFF020100 +#define OID_SKGE_SENSOR_INDEX 0xFF020101 +#define OID_SKGE_SENSOR_DESCR 0xFF020102 +#define OID_SKGE_SENSOR_TYPE 0xFF020103 +#define OID_SKGE_SENSOR_VALUE 0xFF020104 +#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105 +#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106 +#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107 +#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108 +#define OID_SKGE_SENSOR_STATUS 0xFF020109 +#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A +#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B +#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C +#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D + +#define OID_SKGE_CHKSM_NUMBER 0xFF020110 +#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111 +#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112 +#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113 +#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114 +#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115 + +#define OID_SKGE_STAT_TX 0xFF020120 +#define OID_SKGE_STAT_TX_OCTETS 0xFF020121 +#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122 +#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123 +#define OID_SKGE_STAT_TX_UNICAST 0xFF020124 +#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125 +#define OID_SKGE_STAT_TX_BURST 0xFF020126 +#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127 +#define OID_SKGE_STAT_TX_FLOWC 0xFF020128 +#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129 +#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A +#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B +#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C +#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D +#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E +#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F +#define OID_SKGE_STAT_TX_CARRIER 0xFF020130 +/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */ +#define OID_SKGE_STAT_TX_64 0xFF020132 +#define OID_SKGE_STAT_TX_127 0xFF020133 +#define OID_SKGE_STAT_TX_255 0xFF020134 +#define OID_SKGE_STAT_TX_511 0xFF020135 +#define OID_SKGE_STAT_TX_1023 0xFF020136 +#define OID_SKGE_STAT_TX_MAX 0xFF020137 +#define OID_SKGE_STAT_TX_SYNC 0xFF020138 +#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139 +#define OID_SKGE_STAT_RX 0xFF02013A +#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B +#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C +#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D +#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E +#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F +#define OID_SKGE_STAT_RX_FLOWC 0xFF020140 +#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141 +#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142 +#define OID_SKGE_STAT_RX_BURST 0xFF020143 +#define OID_SKGE_STAT_RX_MISSED 0xFF020144 +#define OID_SKGE_STAT_RX_FRAMING 0xFF020145 +#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146 +#define OID_SKGE_STAT_RX_JABBER 0xFF020147 +#define OID_SKGE_STAT_RX_CARRIER 0xFF020148 +#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149 +#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A +#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B +#define OID_SKGE_STAT_RX_RUNT 0xFF02014C +#define OID_SKGE_STAT_RX_CEXT 0xFF02014D +#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E +#define OID_SKGE_STAT_RX_FCS 0xFF02014F +/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */ +#define OID_SKGE_STAT_RX_64 0xFF020151 +#define OID_SKGE_STAT_RX_127 0xFF020152 +#define OID_SKGE_STAT_RX_255 0xFF020153 +#define OID_SKGE_STAT_RX_511 0xFF020154 +#define OID_SKGE_STAT_RX_1023 0xFF020155 +#define OID_SKGE_STAT_RX_MAX 0xFF020156 +#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157 + +#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160 +#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161 +#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162 +#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163 + +#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164 +#define OID_SKGE_RLMT_STATUS 0xFF020165 +#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166 +#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167 +#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168 +#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169 + +#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150 +#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151 +#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152 +#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153 +#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154 +#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155 + +#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170 +#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171 +#define OID_SKGE_TX_RETRY 0xFF020172 +#define OID_SKGE_RX_INTR_CTS 0xFF020173 +#define OID_SKGE_TX_INTR_CTS 0xFF020174 +#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175 +#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176 +#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177 +#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178 +#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179 +#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A +#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B +#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C +#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D +#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E +#define OID_SKGE_SYSUPTIME 0xFF02017F + +#define OID_SKGE_ALL_DATA 0xFF020190 + +/* Defines for VCT. */ +#define OID_SKGE_VCT_GET 0xFF020200 +#define OID_SKGE_VCT_SET 0xFF020201 +#define OID_SKGE_VCT_STATUS 0xFF020202 + +#ifdef SK_DIAG_SUPPORT +/* Defines for driver DIAG mode. */ +#define OID_SKGE_DIAG_MODE 0xFF020204 +#endif /* SK_DIAG_SUPPORT */ + +/* New OIDs */ +#define OID_SKGE_DRIVER_RELDATE 0xFF020210 +#define OID_SKGE_DRIVER_FILENAME 0xFF020211 +#define OID_SKGE_CHIPID 0xFF020212 +#define OID_SKGE_RAMSIZE 0xFF020213 +#define OID_SKGE_VAUXAVAIL 0xFF020214 +#define OID_SKGE_PHY_TYPE 0xFF020215 +#define OID_SKGE_PHY_LP_MODE 0xFF020216 + +/* VCT struct to store a backup copy of VCT data after a port reset. */ +typedef struct s_PnmiVct { + SK_U8 VctStatus; + SK_U8 PCableLen; + SK_U32 PMdiPairLen[4]; + SK_U8 PMdiPairSts[4]; +} SK_PNMI_VCT; + + +/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */ +#define SK_PNMI_VCT_NONE 0 +#define SK_PNMI_VCT_OLD_VCT_DATA 1 +#define SK_PNMI_VCT_NEW_VCT_DATA 2 +#define SK_PNMI_VCT_OLD_DSP_DATA 4 +#define SK_PNMI_VCT_NEW_DSP_DATA 8 +#define SK_PNMI_VCT_RUNNING 16 + + +/* VCT cable test status. */ +#define SK_PNMI_VCT_NORMAL_CABLE 0 +#define SK_PNMI_VCT_SHORT_CABLE 1 +#define SK_PNMI_VCT_OPEN_CABLE 2 +#define SK_PNMI_VCT_TEST_FAIL 3 +#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4 + +#define OID_SKGE_TRAP_SEN_WAR_LOW 500 +#define OID_SKGE_TRAP_SEN_WAR_UPP 501 +#define OID_SKGE_TRAP_SEN_ERR_LOW 502 +#define OID_SKGE_TRAP_SEN_ERR_UPP 503 +#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520 +#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521 +#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522 +#define OID_SKGE_TRAP_RLMT_PORT_UP 523 +#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524 + +#ifdef SK_DIAG_SUPPORT +/* Defines for driver DIAG mode. */ +#define SK_DIAG_ATTACHED 2 +#define SK_DIAG_RUNNING 1 +#define SK_DIAG_IDLE 0 +#endif /* SK_DIAG_SUPPORT */ + +/* + * Generic PNMI IOCTL subcommand definitions. + */ +#define SK_GET_SINGLE_VAR 1 +#define SK_SET_SINGLE_VAR 2 +#define SK_PRESET_SINGLE_VAR 3 +#define SK_GET_FULL_MIB 4 +#define SK_SET_FULL_MIB 5 +#define SK_PRESET_FULL_MIB 6 + + +/* + * Define error numbers and messages for syslog + */ +#define SK_PNMI_ERR001 (SK_ERRBASE_PNMI + 1) +#define SK_PNMI_ERR001MSG "SkPnmiGetStruct: Unknown OID" +#define SK_PNMI_ERR002 (SK_ERRBASE_PNMI + 2) +#define SK_PNMI_ERR002MSG "SkPnmiGetStruct: Cannot read VPD keys" +#define SK_PNMI_ERR003 (SK_ERRBASE_PNMI + 3) +#define SK_PNMI_ERR003MSG "OidStruct: Called with wrong OID" +#define SK_PNMI_ERR004 (SK_ERRBASE_PNMI + 4) +#define SK_PNMI_ERR004MSG "OidStruct: Called with wrong action" +#define SK_PNMI_ERR005 (SK_ERRBASE_PNMI + 5) +#define SK_PNMI_ERR005MSG "Perform: Cannot reset driver" +#define SK_PNMI_ERR006 (SK_ERRBASE_PNMI + 6) +#define SK_PNMI_ERR006MSG "Perform: Unknown OID action command" +#define SK_PNMI_ERR007 (SK_ERRBASE_PNMI + 7) +#define SK_PNMI_ERR007MSG "General: Driver description not initialized" +#define SK_PNMI_ERR008 (SK_ERRBASE_PNMI + 8) +#define SK_PNMI_ERR008MSG "Addr: Tried to get unknown OID" +#define SK_PNMI_ERR009 (SK_ERRBASE_PNMI + 9) +#define SK_PNMI_ERR009MSG "Addr: Unknown OID" +#define SK_PNMI_ERR010 (SK_ERRBASE_PNMI + 10) +#define SK_PNMI_ERR010MSG "CsumStat: Unknown OID" +#define SK_PNMI_ERR011 (SK_ERRBASE_PNMI + 11) +#define SK_PNMI_ERR011MSG "SensorStat: Sensor descr string too long" +#define SK_PNMI_ERR012 (SK_ERRBASE_PNMI + 12) +#define SK_PNMI_ERR012MSG "SensorStat: Unknown OID" +#define SK_PNMI_ERR013 (SK_ERRBASE_PNMI + 13) +#define SK_PNMI_ERR013MSG "" +#define SK_PNMI_ERR014 (SK_ERRBASE_PNMI + 14) +#define SK_PNMI_ERR014MSG "Vpd: Cannot read VPD keys" +#define SK_PNMI_ERR015 (SK_ERRBASE_PNMI + 15) +#define SK_PNMI_ERR015MSG "Vpd: Internal array for VPD keys to small" +#define SK_PNMI_ERR016 (SK_ERRBASE_PNMI + 16) +#define SK_PNMI_ERR016MSG "Vpd: Key string too long" +#define SK_PNMI_ERR017 (SK_ERRBASE_PNMI + 17) +#define SK_PNMI_ERR017MSG "Vpd: Invalid VPD status pointer" +#define SK_PNMI_ERR018 (SK_ERRBASE_PNMI + 18) +#define SK_PNMI_ERR018MSG "Vpd: VPD data not valid" +#define SK_PNMI_ERR019 (SK_ERRBASE_PNMI + 19) +#define SK_PNMI_ERR019MSG "Vpd: VPD entries list string too long" +#define SK_PNMI_ERR021 (SK_ERRBASE_PNMI + 21) +#define SK_PNMI_ERR021MSG "Vpd: VPD data string too long" +#define SK_PNMI_ERR022 (SK_ERRBASE_PNMI + 22) +#define SK_PNMI_ERR022MSG "Vpd: VPD data string too long should be errored before" +#define SK_PNMI_ERR023 (SK_ERRBASE_PNMI + 23) +#define SK_PNMI_ERR023MSG "Vpd: Unknown OID in get action" +#define SK_PNMI_ERR024 (SK_ERRBASE_PNMI + 24) +#define SK_PNMI_ERR024MSG "Vpd: Unknown OID in preset/set action" +#define SK_PNMI_ERR025 (SK_ERRBASE_PNMI + 25) +#define SK_PNMI_ERR025MSG "Vpd: Cannot write VPD after modify entry" +#define SK_PNMI_ERR026 (SK_ERRBASE_PNMI + 26) +#define SK_PNMI_ERR026MSG "Vpd: Cannot update VPD" +#define SK_PNMI_ERR027 (SK_ERRBASE_PNMI + 27) +#define SK_PNMI_ERR027MSG "Vpd: Cannot delete VPD entry" +#define SK_PNMI_ERR028 (SK_ERRBASE_PNMI + 28) +#define SK_PNMI_ERR028MSG "Vpd: Cannot update VPD after delete entry" +#define SK_PNMI_ERR029 (SK_ERRBASE_PNMI + 29) +#define SK_PNMI_ERR029MSG "General: Driver description string too long" +#define SK_PNMI_ERR030 (SK_ERRBASE_PNMI + 30) +#define SK_PNMI_ERR030MSG "General: Driver version not initialized" +#define SK_PNMI_ERR031 (SK_ERRBASE_PNMI + 31) +#define SK_PNMI_ERR031MSG "General: Driver version string too long" +#define SK_PNMI_ERR032 (SK_ERRBASE_PNMI + 32) +#define SK_PNMI_ERR032MSG "General: Cannot read VPD Name for HW descr" +#define SK_PNMI_ERR033 (SK_ERRBASE_PNMI + 33) +#define SK_PNMI_ERR033MSG "General: HW description string too long" +#define SK_PNMI_ERR034 (SK_ERRBASE_PNMI + 34) +#define SK_PNMI_ERR034MSG "General: Unknown OID" +#define SK_PNMI_ERR035 (SK_ERRBASE_PNMI + 35) +#define SK_PNMI_ERR035MSG "Rlmt: Unknown OID" +#define SK_PNMI_ERR036 (SK_ERRBASE_PNMI + 36) +#define SK_PNMI_ERR036MSG "" +#define SK_PNMI_ERR037 (SK_ERRBASE_PNMI + 37) +#define SK_PNMI_ERR037MSG "Rlmt: SK_RLMT_MODE_CHANGE event return not 0" +#define SK_PNMI_ERR038 (SK_ERRBASE_PNMI + 38) +#define SK_PNMI_ERR038MSG "Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0" +#define SK_PNMI_ERR039 (SK_ERRBASE_PNMI + 39) +#define SK_PNMI_ERR039MSG "RlmtStat: Unknown OID" +#define SK_PNMI_ERR040 (SK_ERRBASE_PNMI + 40) +#define SK_PNMI_ERR040MSG "PowerManagement: Unknown OID" +#define SK_PNMI_ERR041 (SK_ERRBASE_PNMI + 41) +#define SK_PNMI_ERR041MSG "MacPrivateConf: Unknown OID" +#define SK_PNMI_ERR042 (SK_ERRBASE_PNMI + 42) +#define SK_PNMI_ERR042MSG "MacPrivateConf: SK_HWEV_SET_ROLE returned not 0" +#define SK_PNMI_ERR043 (SK_ERRBASE_PNMI + 43) +#define SK_PNMI_ERR043MSG "MacPrivateConf: SK_HWEV_SET_LMODE returned not 0" +#define SK_PNMI_ERR044 (SK_ERRBASE_PNMI + 44) +#define SK_PNMI_ERR044MSG "MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0" +#define SK_PNMI_ERR045 (SK_ERRBASE_PNMI + 45) +#define SK_PNMI_ERR045MSG "MacPrivateConf: SK_HWEV_SET_SPEED returned not 0" +#define SK_PNMI_ERR046 (SK_ERRBASE_PNMI + 46) +#define SK_PNMI_ERR046MSG "Monitor: Unknown OID" +#define SK_PNMI_ERR047 (SK_ERRBASE_PNMI + 47) +#define SK_PNMI_ERR047MSG "SirqUpdate: Event function returns not 0" +#define SK_PNMI_ERR048 (SK_ERRBASE_PNMI + 48) +#define SK_PNMI_ERR048MSG "RlmtUpdate: Event function returns not 0" +#define SK_PNMI_ERR049 (SK_ERRBASE_PNMI + 49) +#define SK_PNMI_ERR049MSG "SkPnmiInit: Invalid size of 'CounterOffset' struct!!" +#define SK_PNMI_ERR050 (SK_ERRBASE_PNMI + 50) +#define SK_PNMI_ERR050MSG "SkPnmiInit: Invalid size of 'StatAddr' table!!" +#define SK_PNMI_ERR051 (SK_ERRBASE_PNMI + 51) +#define SK_PNMI_ERR051MSG "SkPnmiEvent: Port switch suspicious" +#define SK_PNMI_ERR052 (SK_ERRBASE_PNMI + 52) +#define SK_PNMI_ERR052MSG "" +#define SK_PNMI_ERR053 (SK_ERRBASE_PNMI + 53) +#define SK_PNMI_ERR053MSG "General: Driver release date not initialized" +#define SK_PNMI_ERR054 (SK_ERRBASE_PNMI + 54) +#define SK_PNMI_ERR054MSG "General: Driver release date string too long" +#define SK_PNMI_ERR055 (SK_ERRBASE_PNMI + 55) +#define SK_PNMI_ERR055MSG "General: Driver file name not initialized" +#define SK_PNMI_ERR056 (SK_ERRBASE_PNMI + 56) +#define SK_PNMI_ERR056MSG "General: Driver file name string too long" + +/* + * Management counter macros called by the driver + */ +#define SK_PNMI_SET_DRIVER_DESCR(pAC,v) ((pAC)->Pnmi.pDriverDescription = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_VER(pAC,v) ((pAC)->Pnmi.pDriverVersion = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v) ((pAC)->Pnmi.pDriverReleaseDate = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v) ((pAC)->Pnmi.pDriverFileName = \ + (char *)(v)) + +#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \ + { \ + (pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \ + if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \ + (pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \ + } \ + } +#define SK_PNMI_CNT_TX_RETRY(pAC,p) (((pAC)->Pnmi.Port[p].TxRetryCts)++) +#define SK_PNMI_CNT_RX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].RxIntrCts)++) +#define SK_PNMI_CNT_TX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].TxIntrCts)++) +#define SK_PNMI_CNT_NO_RX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].RxNoBufCts)++) +#define SK_PNMI_CNT_NO_TX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].TxNoBufCts)++) +#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \ + ((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v)); +#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \ + { \ + ((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \ + (pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \ + } +#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p) (((pAC)->Pnmi.Port[p].ErrRecoveryCts)++); + +#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatSyncCts)++; \ + (pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \ + } \ + } + +#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \ + } \ + } + +#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \ + } \ + } + +#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \ + } \ + } + +/* + * Conversion Macros + */ +#define SK_PNMI_PORT_INST2LOG(i) ((unsigned int)(i) - 1) +#define SK_PNMI_PORT_LOG2INST(l) ((unsigned int)(l) + 1) +#define SK_PNMI_PORT_PHYS2LOG(p) ((unsigned int)(p) + 1) +#define SK_PNMI_PORT_LOG2PHYS(pAC,l) ((unsigned int)(l) - 1) +#define SK_PNMI_PORT_PHYS2INST(pAC,p) \ + (pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2)) +#define SK_PNMI_PORT_INST2PHYS(pAC,i) ((unsigned int)(i) - 2) + +/* + * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct + */ +#define SK_PNMI_VPD_KEY_SIZE 5 +#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE) +#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4) +#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */ + +#define SK_PNMI_MULTICAST_LISTLEN 64 +#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS) +#define SK_PNMI_CHECKSUM_ENTRIES 3 +#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1) +#define SK_PNMI_MONITOR_ENTRIES 20 +#define SK_PNMI_TRAP_ENTRIES 10 +#define SK_PNMI_TRAPLEN 128 +#define SK_PNMI_STRINGLEN1 80 +#define SK_PNMI_STRINGLEN2 25 +#define SK_PNMI_TRAP_QUEUE_LEN 512 + +typedef struct s_PnmiVpd { + char VpdKey[SK_PNMI_VPD_KEY_SIZE]; + char VpdValue[SK_PNMI_VPD_DATALEN]; + SK_U8 VpdAccess; + SK_U8 VpdAction; +} SK_PNMI_VPD; + +typedef struct s_PnmiSensor { + SK_U8 SensorIndex; + char SensorDescr[SK_PNMI_STRINGLEN2]; + SK_U8 SensorType; + SK_U32 SensorValue; + SK_U32 SensorWarningThresholdLow; + SK_U32 SensorWarningThresholdHigh; + SK_U32 SensorErrorThresholdLow; + SK_U32 SensorErrorThresholdHigh; + SK_U8 SensorStatus; + SK_U64 SensorWarningCts; + SK_U64 SensorErrorCts; + SK_U64 SensorWarningTimestamp; + SK_U64 SensorErrorTimestamp; +} SK_PNMI_SENSOR; + +typedef struct s_PnmiChecksum { + SK_U64 ChecksumRxOkCts; + SK_U64 ChecksumRxUnableCts; + SK_U64 ChecksumRxErrCts; + SK_U64 ChecksumTxOkCts; + SK_U64 ChecksumTxUnableCts; +} SK_PNMI_CHECKSUM; + +typedef struct s_PnmiStat { + SK_U64 StatTxOkCts; + SK_U64 StatTxOctetsOkCts; + SK_U64 StatTxBroadcastOkCts; + SK_U64 StatTxMulticastOkCts; + SK_U64 StatTxUnicastOkCts; + SK_U64 StatTxLongFramesCts; + SK_U64 StatTxBurstCts; + SK_U64 StatTxPauseMacCtrlCts; + SK_U64 StatTxMacCtrlCts; + SK_U64 StatTxSingleCollisionCts; + SK_U64 StatTxMultipleCollisionCts; + SK_U64 StatTxExcessiveCollisionCts; + SK_U64 StatTxLateCollisionCts; + SK_U64 StatTxDeferralCts; + SK_U64 StatTxExcessiveDeferralCts; + SK_U64 StatTxFifoUnderrunCts; + SK_U64 StatTxCarrierCts; + SK_U64 Dummy1; /* StatTxUtilization */ + SK_U64 StatTx64Cts; + SK_U64 StatTx127Cts; + SK_U64 StatTx255Cts; + SK_U64 StatTx511Cts; + SK_U64 StatTx1023Cts; + SK_U64 StatTxMaxCts; + SK_U64 StatTxSyncCts; + SK_U64 StatTxSyncOctetsCts; + SK_U64 StatRxOkCts; + SK_U64 StatRxOctetsOkCts; + SK_U64 StatRxBroadcastOkCts; + SK_U64 StatRxMulticastOkCts; + SK_U64 StatRxUnicastOkCts; + SK_U64 StatRxLongFramesCts; + SK_U64 StatRxPauseMacCtrlCts; + SK_U64 StatRxMacCtrlCts; + SK_U64 StatRxPauseMacCtrlErrorCts; + SK_U64 StatRxMacCtrlUnknownCts; + SK_U64 StatRxBurstCts; + SK_U64 StatRxMissedCts; + SK_U64 StatRxFramingCts; + SK_U64 StatRxFifoOverflowCts; + SK_U64 StatRxJabberCts; + SK_U64 StatRxCarrierCts; + SK_U64 StatRxIRLengthCts; + SK_U64 StatRxSymbolCts; + SK_U64 StatRxShortsCts; + SK_U64 StatRxRuntCts; + SK_U64 StatRxCextCts; + SK_U64 StatRxTooLongCts; + SK_U64 StatRxFcsCts; + SK_U64 Dummy2; /* StatRxUtilization */ + SK_U64 StatRx64Cts; + SK_U64 StatRx127Cts; + SK_U64 StatRx255Cts; + SK_U64 StatRx511Cts; + SK_U64 StatRx1023Cts; + SK_U64 StatRxMaxCts; +} SK_PNMI_STAT; + +typedef struct s_PnmiConf { + char ConfMacCurrentAddr[6]; + char ConfMacFactoryAddr[6]; + SK_U8 ConfPMD; + SK_U8 ConfConnector; + SK_U32 ConfPhyType; + SK_U32 ConfPhyMode; + SK_U8 ConfLinkCapability; + SK_U8 ConfLinkMode; + SK_U8 ConfLinkModeStatus; + SK_U8 ConfLinkStatus; + SK_U8 ConfFlowCtrlCapability; + SK_U8 ConfFlowCtrlMode; + SK_U8 ConfFlowCtrlStatus; + SK_U8 ConfPhyOperationCapability; + SK_U8 ConfPhyOperationMode; + SK_U8 ConfPhyOperationStatus; + SK_U8 ConfSpeedCapability; + SK_U8 ConfSpeedMode; + SK_U8 ConfSpeedStatus; +} SK_PNMI_CONF; + +typedef struct s_PnmiRlmt { + SK_U32 RlmtIndex; + SK_U32 RlmtStatus; + SK_U64 RlmtTxHelloCts; + SK_U64 RlmtRxHelloCts; + SK_U64 RlmtTxSpHelloReqCts; + SK_U64 RlmtRxSpHelloCts; +} SK_PNMI_RLMT; + +typedef struct s_PnmiRlmtMonitor { + SK_U32 RlmtMonitorIndex; + char RlmtMonitorAddr[6]; + SK_U64 RlmtMonitorErrorCts; + SK_U64 RlmtMonitorTimestamp; + SK_U8 RlmtMonitorAdmin; +} SK_PNMI_RLMT_MONITOR; + +typedef struct s_PnmiRequestStatus { + SK_U32 ErrorStatus; + SK_U32 ErrorOffset; +} SK_PNMI_REQUEST_STATUS; + +typedef struct s_PnmiStrucData { + SK_U32 MgmtDBVersion; + SK_PNMI_REQUEST_STATUS ReturnStatus; + SK_U32 VpdFreeBytes; + char VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE]; + SK_U32 VpdEntriesNumber; + SK_PNMI_VPD Vpd[SK_PNMI_VPD_ENTRIES]; + SK_U32 PortNumber; + SK_U32 DeviceType; + char DriverDescr[SK_PNMI_STRINGLEN1]; + char DriverVersion[SK_PNMI_STRINGLEN2]; + char DriverReleaseDate[SK_PNMI_STRINGLEN1]; + char DriverFileName[SK_PNMI_STRINGLEN1]; + char HwDescr[SK_PNMI_STRINGLEN1]; + char HwVersion[SK_PNMI_STRINGLEN2]; + SK_U16 Chipset; + SK_U32 ChipId; + SK_U8 VauxAvail; + SK_U32 RamSize; + SK_U32 MtuSize; + SK_U32 Action; + SK_U32 TestResult; + SK_U8 BusType; + SK_U8 BusSpeed; + SK_U8 BusWidth; + SK_U8 SensorNumber; + SK_PNMI_SENSOR Sensor[SK_PNMI_SENSOR_ENTRIES]; + SK_U8 ChecksumNumber; + SK_PNMI_CHECKSUM Checksum[SK_PNMI_CHECKSUM_ENTRIES]; + SK_PNMI_STAT Stat[SK_PNMI_MAC_ENTRIES]; + SK_PNMI_CONF Conf[SK_PNMI_MAC_ENTRIES]; + SK_U8 RlmtMode; + SK_U32 RlmtPortNumber; + SK_U8 RlmtPortActive; + SK_U8 RlmtPortPreferred; + SK_U64 RlmtChangeCts; + SK_U64 RlmtChangeTime; + SK_U64 RlmtChangeEstimate; + SK_U64 RlmtChangeThreshold; + SK_PNMI_RLMT Rlmt[SK_MAX_MACS]; + SK_U32 RlmtMonitorNumber; + SK_PNMI_RLMT_MONITOR RlmtMonitor[SK_PNMI_MONITOR_ENTRIES]; + SK_U32 TrapNumber; + SK_U8 Trap[SK_PNMI_TRAP_QUEUE_LEN]; + SK_U64 TxSwQueueLen; + SK_U64 TxSwQueueMax; + SK_U64 TxRetryCts; + SK_U64 RxIntrCts; + SK_U64 TxIntrCts; + SK_U64 RxNoBufCts; + SK_U64 TxNoBufCts; + SK_U64 TxUsedDescrNo; + SK_U64 RxDeliveredCts; + SK_U64 RxOctetsDeliveredCts; + SK_U64 RxHwErrorsCts; + SK_U64 TxHwErrorsCts; + SK_U64 InErrorsCts; + SK_U64 OutErrorsCts; + SK_U64 ErrRecoveryCts; + SK_U64 SysUpTime; +} SK_PNMI_STRUCT_DATA; + +#define SK_PNMI_STRUCT_SIZE (sizeof(SK_PNMI_STRUCT_DATA)) +#define SK_PNMI_MIN_STRUCT_SIZE ((unsigned int)(SK_UPTR)\ + &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes)) + /* + * ReturnStatus field + * must be located + * before VpdFreeBytes + */ + +/* + * Various definitions + */ +#define SK_PNMI_MAX_PROTOS 3 + +#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum + * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK + * for check while init phase 1 + */ + +/* + * Estimate data structure + */ +typedef struct s_PnmiEstimate { + unsigned int EstValueIndex; + SK_U64 EstValue[7]; + SK_U64 Estimate; + SK_TIMER EstTimer; +} SK_PNMI_ESTIMATE; + + +/* + * VCT timer data structure + */ +typedef struct s_VctTimer { + SK_TIMER VctTimer; +} SK_PNMI_VCT_TIMER; + + +/* + * PNMI specific adapter context structure + */ +typedef struct s_PnmiPort { + SK_U64 StatSyncCts; + SK_U64 StatSyncOctetsCts; + SK_U64 StatRxLongFrameCts; + SK_U64 StatRxFrameTooLongCts; + SK_U64 StatRxPMaccErr; + SK_U64 TxSwQueueLen; + SK_U64 TxSwQueueMax; + SK_U64 TxRetryCts; + SK_U64 RxIntrCts; + SK_U64 TxIntrCts; + SK_U64 RxNoBufCts; + SK_U64 TxNoBufCts; + SK_U64 TxUsedDescrNo; + SK_U64 RxDeliveredCts; + SK_U64 RxOctetsDeliveredCts; + SK_U64 RxHwErrorsCts; + SK_U64 TxHwErrorsCts; + SK_U64 InErrorsCts; + SK_U64 OutErrorsCts; + SK_U64 ErrRecoveryCts; + SK_U64 RxShortZeroMark; + SK_U64 CounterOffset[SK_PNMI_CNT_NO]; + SK_U32 CounterHigh[SK_PNMI_CNT_NO]; + SK_BOOL ActiveFlag; + SK_U8 Align[3]; +} SK_PNMI_PORT; + + +typedef struct s_PnmiData { + SK_PNMI_PORT Port [SK_MAX_MACS]; + SK_PNMI_PORT BufPort [SK_MAX_MACS]; /* 2002-09-13 pweber */ + SK_U64 VirtualCounterOffset[SK_PNMI_CNT_NO]; + SK_U32 TestResult; + char HwVersion[10]; + SK_U16 Align01; + + char *pDriverDescription; + char *pDriverVersion; + char *pDriverReleaseDate; + char *pDriverFileName; + + int MacUpdatedFlag; + int RlmtUpdatedFlag; + int SirqUpdatedFlag; + + SK_U64 RlmtChangeCts; + SK_U64 RlmtChangeTime; + SK_PNMI_ESTIMATE RlmtChangeEstimate; + SK_U64 RlmtChangeThreshold; + + SK_U64 StartUpTime; + SK_U32 DeviceType; + char PciBusSpeed; + char PciBusWidth; + char Chipset; + char PMD; + char Connector; + SK_BOOL DualNetActiveFlag; + SK_U16 Align02; + + char TrapBuf[SK_PNMI_TRAP_QUEUE_LEN]; + unsigned int TrapBufFree; + unsigned int TrapQueueBeg; + unsigned int TrapQueueEnd; + unsigned int TrapBufPad; + unsigned int TrapUnique; + SK_U8 VctStatus[SK_MAX_MACS]; + SK_PNMI_VCT VctBackup[SK_MAX_MACS]; + SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS]; +#ifdef SK_DIAG_SUPPORT + SK_U32 DiagAttached; +#endif /* SK_DIAG_SUPPORT */ +} SK_PNMI; + + +/* + * Function prototypes + */ +extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level); +extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, + SK_EVPARA Param); +extern int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf, + unsigned int * pLen, SK_U32 NetIndex); + +#endif diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h new file mode 100644 index 00000000000..3eec6274e41 --- /dev/null +++ b/drivers/net/sk98lin/h/skgesirq.h @@ -0,0 +1,110 @@ +/****************************************************************************** + * + * Name: skgesirq.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.30 $ + * Date: $Date: 2003/07/04 12:34:13 $ + * Purpose: SK specific Gigabit Ethernet special IRQ functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _INC_SKGESIRQ_H_ +#define _INC_SKGESIRQ_H_ + +/* Define return codes of SkGePortCheckUp and CheckShort */ +#define SK_HW_PS_NONE 0 /* No action needed */ +#define SK_HW_PS_RESTART 1 /* Restart needed */ +#define SK_HW_PS_LINK 2 /* Link Up actions needed */ + +/* + * Define the Event the special IRQ/INI module can handle + */ +#define SK_HWEV_WATIM 1 /* Timeout for WA Errata #2 XMAC */ +#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */ +#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */ +#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */ +#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */ +#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */ +#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */ +#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */ +#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */ +#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */ + +#define SK_WA_ACT_TIME (5000000UL) /* 5 sec */ +#define SK_WA_INA_TIME (100000UL) /* 100 msec */ + +#define SK_HALFDUP_CHK_TIME (10000UL) /* 10 msec */ + +/* + * Define the error numbers and messages + */ +#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0) +#define SKERR_SIRQ_E001MSG "Unknown event" +#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1) +#define SKERR_SIRQ_E002MSG "Packet timeout RX1" +#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1) +#define SKERR_SIRQ_E003MSG "Packet timeout RX2" +#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1) +#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized" +#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1) +#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized" +#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1) +#define SKERR_SIRQ_E006MSG "CHECK failure R1" +#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1) +#define SKERR_SIRQ_E007MSG "CHECK failure R2" +#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1) +#define SKERR_SIRQ_E008MSG "CHECK failure XS1" +#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1) +#define SKERR_SIRQ_E009MSG "CHECK failure XA1" +#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1) +#define SKERR_SIRQ_E010MSG "CHECK failure XS2" +#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1) +#define SKERR_SIRQ_E011MSG "CHECK failure XA2" +#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1) +#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error" +#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1) +#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error" +#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1) +#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)" +#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1) +#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)" +#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1) +#define SKERR_SIRQ_E016MSG "Parity error MAC 1" +#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1) +#define SKERR_SIRQ_E017MSG "Parity error MAC 2" +#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1) +#define SKERR_SIRQ_E018MSG "Parity error RX 1" +#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1) +#define SKERR_SIRQ_E019MSG "Parity error RX 2" +#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1) +#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun" +#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1) +#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt" +#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1) +#define SKERR_SIRQ_E022MSG "Cable pair swap error" +#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1) +#define SKERR_SIRQ_E023MSG "Auto-negotiation error" +#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1) +#define SKERR_SIRQ_E024MSG "FIFO overflow error" +#define SKERR_SIRQ_E025 (SKERR_SIRQ_E024+1) +#define SKERR_SIRQ_E025MSG "2 Pair Downshift detected" + +extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus); +extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); +extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port); + +#endif /* _INC_SKGESIRQ_H_ */ diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h new file mode 100644 index 00000000000..6a63f4a15de --- /dev/null +++ b/drivers/net/sk98lin/h/ski2c.h @@ -0,0 +1,174 @@ +/****************************************************************************** + * + * Name: ski2c.h + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.35 $ + * Date: $Date: 2003/10/20 09:06:30 $ + * Purpose: Defines to access Voltage and Temperature Sensor + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKI2C.H contains all I2C specific defines + */ + +#ifndef _SKI2C_H_ +#define _SKI2C_H_ + +typedef struct s_Sensor SK_SENSOR; + +#include "h/skgei2c.h" + +/* + * Define the I2C events. + */ +#define SK_I2CEV_IRQ 1 /* IRQ happened Event */ +#define SK_I2CEV_TIM 2 /* Timeout event */ +#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */ + +/* + * Define READ and WRITE Constants. + */ +#define I2C_READ 0 +#define I2C_WRITE 1 +#define I2C_BURST 1 +#define I2C_SINGLE 0 + +#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0) +#define SKERR_I2C_E001MSG "Sensor index unknown" +#define SKERR_I2C_E002 (SKERR_I2C_E001+1) +#define SKERR_I2C_E002MSG "TWSI: transfer does not complete" +#define SKERR_I2C_E003 (SKERR_I2C_E002+1) +#define SKERR_I2C_E003MSG "LM80: NAK on device send" +#define SKERR_I2C_E004 (SKERR_I2C_E003+1) +#define SKERR_I2C_E004MSG "LM80: NAK on register send" +#define SKERR_I2C_E005 (SKERR_I2C_E004+1) +#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send" +#define SKERR_I2C_E006 (SKERR_I2C_E005+1) +#define SKERR_I2C_E006MSG "Unknown event" +#define SKERR_I2C_E007 (SKERR_I2C_E006+1) +#define SKERR_I2C_E007MSG "LM80 read out of state" +#define SKERR_I2C_E008 (SKERR_I2C_E007+1) +#define SKERR_I2C_E008MSG "Unexpected sensor read completed" +#define SKERR_I2C_E009 (SKERR_I2C_E008+1) +#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range" +#define SKERR_I2C_E010 (SKERR_I2C_E009+1) +#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range" +#define SKERR_I2C_E011 (SKERR_I2C_E010+1) +#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range" +#define SKERR_I2C_E012 (SKERR_I2C_E011+1) +#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range" +#define SKERR_I2C_E013 (SKERR_I2C_E012+1) +#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor" +#define SKERR_I2C_E014 (SKERR_I2C_E013+1) +#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range" +#define SKERR_I2C_E015 (SKERR_I2C_E014+1) +#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range" +#define SKERR_I2C_E016 (SKERR_I2C_E015+1) +#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete" + +/* + * Define Timeout values + */ +#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */ +#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */ +#define SK_I2C_TIM_WATCH 1000000L /* 1 second */ + +/* + * Define trap and error log hold times + */ +#ifndef SK_SEN_ERR_TR_HOLD +#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_ERR_LOG_HOLD +#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_WARN_TR_HOLD +#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_WARN_LOG_HOLD +#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC) +#endif + +/* + * Defines for SenType + */ +#define SK_SEN_UNKNOWN 0 +#define SK_SEN_TEMP 1 +#define SK_SEN_VOLT 2 +#define SK_SEN_FAN 3 + +/* + * Define for the SenErrorFlag + */ +#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */ +#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */ +#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */ +#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */ +#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */ + +/* + * Define the Sensor struct + */ +struct s_Sensor { + char *SenDesc; /* Description */ + int SenType; /* Voltage or Temperature */ + SK_I32 SenValue; /* Current value of the sensor */ + SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */ + SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */ + SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */ + SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */ + int SenErrFlag; /* Sensor indicated an error */ + SK_BOOL SenInit; /* Is sensor initialized ? */ + SK_U64 SenErrCts; /* Error trap counter */ + SK_U64 SenWarnCts; /* Warning trap counter */ + SK_U64 SenBegErrTS; /* Begin error timestamp */ + SK_U64 SenBegWarnTS; /* Begin warning timestamp */ + SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */ + SK_U64 SenLastErrLogTS; /* Last error log timestamp */ + SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */ + SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */ + int SenState; /* Sensor State (see HW specific include) */ + int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen); + /* Sensors read function */ + SK_U16 SenReg; /* Register Address for this sensor */ + SK_U8 SenDev; /* Device Selection for this sensor */ +}; + +typedef struct s_I2c { + SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */ + int CurrSens; /* Which sensor is currently queried */ + int MaxSens; /* Max. number of sensors */ + int TimerMode; /* Use the timer also to watch the state machine */ + int InitLevel; /* Initialized Level */ +#ifndef SK_DIAG + int DummyReads; /* Number of non-checked dummy reads */ + SK_TIMER SenTimer; /* Sensors timer */ +#endif /* !SK_DIAG */ +} SK_I2C; + +extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level); +#ifdef SK_DIAG +extern SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg, + int Burst); +#else /* !SK_DIAG */ +extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); +extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC); +extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC); +#endif /* !SK_DIAG */ +#endif /* n_SKI2C_H */ + diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h new file mode 100644 index 00000000000..2ec40d4fdf6 --- /dev/null +++ b/drivers/net/sk98lin/h/skqueue.h @@ -0,0 +1,94 @@ +/****************************************************************************** + * + * Name: skqueue.h + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.16 $ + * Date: $Date: 2003/09/16 12:50:32 $ + * Purpose: Defines for the Event queue + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKQUEUE.H contains all defines and types for the event queue + */ + +#ifndef _SKQUEUE_H_ +#define _SKQUEUE_H_ + + +/* + * define the event classes to be served + */ +#define SKGE_DRV 1 /* Driver Event Class */ +#define SKGE_RLMT 2 /* RLMT Event Class */ +#define SKGE_I2C 3 /* I2C Event Class */ +#define SKGE_PNMI 4 /* PNMI Event Class */ +#define SKGE_CSUM 5 /* Checksum Event Class */ +#define SKGE_HWAC 6 /* Hardware Access Event Class */ + +#define SKGE_SWT 9 /* Software Timer Event Class */ +#define SKGE_LACP 10 /* LACP Aggregation Event Class */ +#define SKGE_RSF 11 /* RSF Aggregation Event Class */ +#define SKGE_MARKER 12 /* MARKER Aggregation Event Class */ +#define SKGE_FD 13 /* FD Distributor Event Class */ + +/* + * define event queue as circular buffer + */ +#define SK_MAX_EVENT 64 + +/* + * Parameter union for the Para stuff + */ +typedef union u_EvPara { + void *pParaPtr; /* Parameter Pointer */ + SK_U64 Para64; /* Parameter 64bit version */ + SK_U32 Para32[2]; /* Parameter Array of 32bit parameters */ +} SK_EVPARA; + +/* + * Event Queue + * skqueue.c + * events are class/value pairs + * class is addressee, e.g. RLMT, PNMI etc. + * value is command, e.g. line state change, ring op change etc. + */ +typedef struct s_EventElem { + SK_U32 Class; /* Event class */ + SK_U32 Event; /* Event value */ + SK_EVPARA Para; /* Event parameter */ +} SK_EVENTELEM; + +typedef struct s_Queue { + SK_EVENTELEM EvQueue[SK_MAX_EVENT]; + SK_EVENTELEM *EvPut; + SK_EVENTELEM *EvGet; +} SK_QUEUE; + +extern void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level); +extern void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event, + SK_EVPARA Para); +extern int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc); + + +/* Define Error Numbers and messages */ +#define SKERR_Q_E001 (SK_ERRBASE_QUEUE+0) +#define SKERR_Q_E001MSG "Event queue overflow" +#define SKERR_Q_E002 (SKERR_Q_E001+1) +#define SKERR_Q_E002MSG "Undefined event class" +#endif /* _SKQUEUE_H_ */ + diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h new file mode 100644 index 00000000000..ca75dfdcf2d --- /dev/null +++ b/drivers/net/sk98lin/h/skrlmt.h @@ -0,0 +1,438 @@ +/****************************************************************************** + * + * Name: skrlmt.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.37 $ + * Date: $Date: 2003/04/15 09:43:43 $ + * Purpose: Header file for Redundant Link ManagemenT. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the header file for Redundant Link ManagemenT. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * ... + * "sktypes.h" + * "skqueue.h" + * "skaddr.h" + * "skrlmt.h" + * ... + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef __INC_SKRLMT_H +#define __INC_SKRLMT_H + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +/* defines ********************************************************************/ + +#define SK_RLMT_NET_DOWN_TEMP 1 /* NET_DOWN due to last port down. */ +#define SK_RLMT_NET_DOWN_FINAL 2 /* NET_DOWN due to RLMT_STOP. */ + +/* ----- Default queue sizes - must be multiples of 8 KB ----- */ + +/* Less than 8 KB free in RX queue => pause frames. */ +#define SK_RLMT_STANDBY_QRXSIZE 128 /* Size of rx standby queue in KB. */ +#define SK_RLMT_STANDBY_QXASIZE 32 /* Size of async standby queue in KB. */ +#define SK_RLMT_STANDBY_QXSSIZE 0 /* Size of sync standby queue in KB. */ + +#define SK_RLMT_MAX_TX_BUF_SIZE 60 /* Maximum RLMT transmit size. */ + +/* ----- PORT states ----- */ + +#define SK_RLMT_PS_INIT 0 /* Port state: Init. */ +#define SK_RLMT_PS_LINK_DOWN 1 /* Port state: Link down. */ +#define SK_RLMT_PS_DOWN 2 /* Port state: Port down. */ +#define SK_RLMT_PS_GOING_UP 3 /* Port state: Going up. */ +#define SK_RLMT_PS_UP 4 /* Port state: Up. */ + +/* ----- RLMT states ----- */ + +#define SK_RLMT_RS_INIT 0 /* RLMT state: Init. */ +#define SK_RLMT_RS_NET_DOWN 1 /* RLMT state: Net down. */ +#define SK_RLMT_RS_NET_UP 2 /* RLMT state: Net up. */ + +/* ----- PORT events ----- */ + +#define SK_RLMT_LINK_UP 1001 /* Link came up. */ +#define SK_RLMT_LINK_DOWN 1002 /* Link went down. */ +#define SK_RLMT_PORT_ADDR 1003 /* Port address changed. */ + +/* ----- RLMT events ----- */ + +#define SK_RLMT_START 2001 /* Start RLMT. */ +#define SK_RLMT_STOP 2002 /* Stop RLMT. */ +#define SK_RLMT_PACKET_RECEIVED 2003 /* Packet was received for RLMT. */ +#define SK_RLMT_STATS_CLEAR 2004 /* Clear statistics. */ +#define SK_RLMT_STATS_UPDATE 2005 /* Update statistics. */ +#define SK_RLMT_PREFPORT_CHANGE 2006 /* Change preferred port. */ +#define SK_RLMT_MODE_CHANGE 2007 /* New RlmtMode. */ +#define SK_RLMT_SET_NETS 2008 /* Number of Nets (1 or 2). */ + +/* ----- RLMT mode bits ----- */ + +/* + * CAUTION: These defines are private to RLMT. + * Please use the RLMT mode defines below. + */ + +#define SK_RLMT_CHECK_LINK 1 /* Check Link. */ +#define SK_RLMT_CHECK_LOC_LINK 2 /* Check other link on same adapter. */ +#define SK_RLMT_CHECK_SEG 4 /* Check segmentation. */ + +#ifndef RLMT_CHECK_REMOTE +#define SK_RLMT_CHECK_OTHERS SK_RLMT_CHECK_LOC_LINK +#else /* RLMT_CHECK_REMOTE */ +#define SK_RLMT_CHECK_REM_LINK 8 /* Check link(s) on other adapter(s). */ +#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED 3 +#define SK_RLMT_CHECK_OTHERS \ + (SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) +#endif /* RLMT_CHECK_REMOTE */ + +#ifndef SK_RLMT_ENABLE_TRANSPARENT +#define SK_RLMT_TRANSPARENT 0 /* RLMT transparent - inactive. */ +#else /* SK_RLMT_ENABLE_TRANSPARENT */ +#define SK_RLMT_TRANSPARENT 128 /* RLMT transparent. */ +#endif /* SK_RLMT_ENABLE_TRANSPARENT */ + +/* ----- RLMT modes ----- */ + +/* Check Link State. */ +#define SK_RLMT_MODE_CLS (SK_RLMT_CHECK_LINK) + +/* Check Local Ports: check other links on the same adapter. */ +#define SK_RLMT_MODE_CLP (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK) + +/* Check Local Ports and Segmentation Status. */ +#define SK_RLMT_MODE_CLPSS \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG) + +#ifdef RLMT_CHECK_REMOTE +/* Check Local and Remote Ports: check links (local or remote). */ + Name of define TBD! +#define SK_RLMT_MODE_CRP \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) + +/* Check Local and Remote Ports and Segmentation Status. */ + Name of define TBD! +#define SK_RLMT_MODE_CRPSS \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \ + SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG) +#endif /* RLMT_CHECK_REMOTE */ + +/* ----- RLMT lookahead result bits ----- */ + +#define SK_RLMT_RX_RLMT 1 /* Give packet to RLMT. */ +#define SK_RLMT_RX_PROTOCOL 2 /* Give packet to protocol. */ + +/* Macros */ + +#if 0 +SK_AC *pAC /* adapter context */ +SK_U32 PortNum /* receiving port */ +unsigned PktLen /* received packet's length */ +SK_BOOL IsBc /* Flag: packet is broadcast */ +unsigned *pOffset /* offs. of bytes to present to SK_RLMT_LOOKAHEAD */ +unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */ +#endif /* 0 */ + +#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \ + SK_AC *_pAC; \ + SK_U32 _PortNum; \ + _pAC = (pAC); \ + _PortNum = (SK_U32)(PortNum); \ + /* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \ + _pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \ + if (_pAC->Rlmt.RlmtOff) { \ + *(pNumBytes) = 0; \ + } \ + else {\ + if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \ + *(pNumBytes) = 0; \ + } \ + else if (IsBc) { \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \ + *(pNumBytes) = 6; \ + *(pOffset) = 6; \ + } \ + else { \ + *(pNumBytes) = 0; \ + } \ + } \ + else { \ + if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pNumBytes) = 0; \ + } \ + else { \ + *(pNumBytes) = 6; \ + *(pOffset) = 0; \ + } \ + } \ + } \ +} + +#if 0 +SK_AC *pAC /* adapter context */ +SK_U32 PortNum /* receiving port */ +SK_U8 *pLaPacket, /* received packet's data (points to pOffset) */ +SK_BOOL IsBc /* Flag: packet is broadcast */ +SK_BOOL IsMc /* Flag: packet is multicast */ +unsigned *pForRlmt /* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */ +SK_RLMT_LOOKAHEAD() expects *pNumBytes from +packet offset *pOffset (s.a.) at *pLaPacket. + +If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is +BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler +can trash unneeded parts of the if construction. +#endif /* 0 */ + +#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \ + SK_AC *_pAC; \ + SK_U32 _PortNum; \ + SK_U8 *_pLaPacket; \ + _pAC = (pAC); \ + _PortNum = (SK_U32)(PortNum); \ + _pLaPacket = (SK_U8 *)(pLaPacket); \ + if (IsBc) {\ + if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \ + _PortNum].Net->NetNumber].CurrentMacAddress.a)) { \ + _pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \ + _pAC->Rlmt.CheckSwitch = SK_TRUE; \ + } \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + else if (IsMc) { \ + if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \ + _pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \ + } \ + else { \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ + else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT; \ + } \ + else { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ + else { \ + if (SK_ADDR_EQUAL( \ + _pLaPacket, \ + _pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT; \ + } \ + else { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ +} + +#ifdef SK_RLMT_FAST_LOOKAHEAD +Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead. +#endif /* SK_RLMT_FAST_LOOKAHEAD */ +#ifdef SK_RLMT_SLOW_LOOKAHEAD +Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead. +#endif /* SK_RLMT_SLOW_LOOKAHEAD */ + +/* typedefs *******************************************************************/ + +#ifdef SK_RLMT_MBUF_PRIVATE +typedef struct s_RlmtMbuf { + some content +} SK_RLMT_MBUF; +#endif /* SK_RLMT_MBUF_PRIVATE */ + + +#ifdef SK_LA_INFO +typedef struct s_Rlmt_PacketInfo { + unsigned PacketLength; /* Length of packet. */ + unsigned PacketType; /* Directed/Multicast/Broadcast. */ +} SK_RLMT_PINFO; +#endif /* SK_LA_INFO */ + + +typedef struct s_RootId { + SK_U8 Id[8]; /* Root Bridge Id. */ +} SK_RLMT_ROOT_ID; + + +typedef struct s_port { + SK_MAC_ADDR CheckAddr; + SK_BOOL SuspectTx; +} SK_PORT_CHECK; + + +typedef struct s_RlmtNet SK_RLMT_NET; + + +typedef struct s_RlmtPort { + +/* ----- Public part (read-only) ----- */ + + SK_U8 PortState; /* Current state of this port. */ + + /* For PNMI */ + SK_BOOL LinkDown; + SK_BOOL PortDown; + SK_U8 Align01; + + SK_U32 PortNumber; /* Number of port on adapter. */ + SK_RLMT_NET * Net; /* Net port belongs to. */ + + SK_U64 TxHelloCts; + SK_U64 RxHelloCts; + SK_U64 TxSpHelloReqCts; + SK_U64 RxSpHelloCts; + +/* ----- Private part ----- */ + +/* SK_U64 PacketsRx; */ /* Total packets received. */ + SK_U32 PacketsPerTimeSlot; /* Packets rxed between TOs. */ +/* SK_U32 DataPacketsPerTimeSlot; */ /* Data packets ... */ + SK_U32 BpduPacketsPerTimeSlot; /* BPDU packets rxed in TS. */ + SK_U64 BcTimeStamp; /* Time of last BC receive. */ + SK_U64 GuTimeStamp; /* Time of entering GOING_UP. */ + + SK_TIMER UpTimer; /* Timer struct Link/Port up. */ + SK_TIMER DownRxTimer; /* Timer struct down rx. */ + SK_TIMER DownTxTimer; /* Timer struct down tx. */ + + SK_U32 CheckingState; /* Checking State. */ + + SK_ADDR_PORT * AddrPort; + + SK_U8 Random[4]; /* Random value. */ + unsigned PortsChecked; /* #ports checked. */ + unsigned PortsSuspect; /* #ports checked that are s. */ + SK_PORT_CHECK PortCheck[1]; +/* SK_PORT_CHECK PortCheck[SK_MAX_MACS - 1]; */ + + SK_BOOL PortStarted; /* Port is started. */ + SK_BOOL PortNoRx; /* NoRx for >= 1 time slot. */ + SK_BOOL RootIdSet; + SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ +} SK_RLMT_PORT; + + +struct s_RlmtNet { + +/* ----- Public part (read-only) ----- */ + + SK_U32 NetNumber; /* Number of net. */ + + SK_RLMT_PORT * Port[SK_MAX_MACS]; /* Ports that belong to this net. */ + SK_U32 NumPorts; /* Number of ports. */ + SK_U32 PrefPort; /* Preferred port. */ + + /* For PNMI */ + + SK_U32 ChgBcPrio; /* Change Priority of last broadcast received */ + SK_U32 RlmtMode; /* Check ... */ + SK_U32 ActivePort; /* Active port. */ + SK_U32 Preference; /* 0xFFFFFFFF: Automatic. */ + + SK_U8 RlmtState; /* Current RLMT state. */ + +/* ----- Private part ----- */ + SK_BOOL RootIdSet; + SK_U16 Align01; + + int LinksUp; /* #Links up. */ + int PortsUp; /* #Ports up. */ + SK_U32 TimeoutValue; /* RLMT timeout value. */ + + SK_U32 CheckingState; /* Checking State. */ + SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ + + SK_TIMER LocTimer; /* Timer struct. */ + SK_TIMER SegTimer; /* Timer struct. */ +}; + + +typedef struct s_Rlmt { + +/* ----- Public part (read-only) ----- */ + + SK_U32 NumNets; /* Number of nets. */ + SK_U32 NetsStarted; /* Number of nets started. */ + SK_RLMT_NET Net[SK_MAX_NETS]; /* Array of available nets. */ + SK_RLMT_PORT Port[SK_MAX_MACS]; /* Array of available ports. */ + +/* ----- Private part ----- */ + SK_BOOL CheckSwitch; + SK_BOOL RlmtOff; /* set to zero if the Mac addresses + are equal or the second one + is zero */ + SK_U16 Align01; + +} SK_RLMT; + + +extern SK_MAC_ADDR BridgeMcAddr; +extern SK_MAC_ADDR SkRlmtMcAddr; + +/* function prototypes ********************************************************/ + + +#ifndef SK_KR_PROTO + +/* Functions provided by SkRlmt */ + +/* ANSI/C++ compliant function prototypes */ + +extern void SkRlmtInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern int SkRlmtEvent( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 Event, + SK_EVPARA Para); + +#else /* defined(SK_KR_PROTO) */ + +/* Non-ANSI/C++ compliant function prototypes */ + +#error KR-style function prototypes are not yet provided. + +#endif /* defined(SK_KR_PROTO)) */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKRLMT_H */ diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h new file mode 100644 index 00000000000..04e6d7c1ec3 --- /dev/null +++ b/drivers/net/sk98lin/h/sktimer.h @@ -0,0 +1,63 @@ +/****************************************************************************** + * + * Name: sktimer.h + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.11 $ + * Date: $Date: 2003/09/16 12:58:18 $ + * Purpose: Defines for the timer functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKTIMER.H contains all defines and types for the timer functions + */ + +#ifndef _SKTIMER_H_ +#define _SKTIMER_H_ + +#include "h/skqueue.h" + +/* + * SK timer + * - needed wherever a timer is used. Put this in your data structure + * wherever you want. + */ +typedef struct s_Timer SK_TIMER; + +struct s_Timer { + SK_TIMER *TmNext; /* linked list */ + SK_U32 TmClass; /* Timer Event class */ + SK_U32 TmEvent; /* Timer Event value */ + SK_EVPARA TmPara; /* Timer Event parameter */ + SK_U32 TmDelta; /* delta time */ + int TmActive; /* flag: active/inactive */ +}; + +/* + * Timer control struct. + * - use in Adapters context name pAC->Tim + */ +typedef struct s_TimCtrl { + SK_TIMER *StQueue; /* Head of Timer queue */ +} SK_TIMCTRL; + +extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level); +extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer); +extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer, + SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para); +extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc); +#endif /* _SKTIMER_H_ */ diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h new file mode 100644 index 00000000000..40edc96e105 --- /dev/null +++ b/drivers/net/sk98lin/h/sktypes.h @@ -0,0 +1,69 @@ +/****************************************************************************** + * + * Name: sktypes.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.2 $ + * Date: $Date: 2003/10/07 08:16:51 $ + * Purpose: Define data types for Linux + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * In this file, all data types that are needed by the common modules + * are mapped to Linux data types. + * + * + * Include File Hierarchy: + * + * + ******************************************************************************/ + +#ifndef __INC_SKTYPES_H +#define __INC_SKTYPES_H + + +/* defines *******************************************************************/ + +/* + * Data types with a specific size. 'I' = signed, 'U' = unsigned. + */ +#define SK_I8 s8 +#define SK_U8 u8 +#define SK_I16 s16 +#define SK_U16 u16 +#define SK_I32 s32 +#define SK_U32 u32 +#define SK_I64 s64 +#define SK_U64 u64 + +#define SK_UPTR ulong /* casting pointer <-> integral */ + +/* +* Boolean type. +*/ +#define SK_BOOL SK_U8 +#define SK_FALSE 0 +#define SK_TRUE (!SK_FALSE) + +/* typedefs *******************************************************************/ + +/* function prototypes ********************************************************/ + +#endif /* __INC_SKTYPES_H */ diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h new file mode 100644 index 00000000000..a1a7294828e --- /dev/null +++ b/drivers/net/sk98lin/h/skversion.h @@ -0,0 +1,38 @@ +/****************************************************************************** + * + * Name: version.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.5 $ + * Date: $Date: 2003/10/07 08:16:51 $ + * Purpose: SK specific Error log support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifdef lint +static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH."; +static const char SysKonnectBuildNumber[] = + "@(#)SK-BUILD: 6.23 PL: 01"; +#endif /* !defined(lint) */ + +#define BOOT_STRING "sk98lin: Network Device Driver v6.23\n" \ + "(C)Copyright 1999-2004 Marvell(R)." + +#define VER_STRING "6.23" +#define DRIVER_FILE_NAME "sk98lin" +#define DRIVER_REL_DATE "Feb-13-2004" + + diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h new file mode 100644 index 00000000000..fdd9e48e804 --- /dev/null +++ b/drivers/net/sk98lin/h/skvpd.h @@ -0,0 +1,248 @@ +/****************************************************************************** + * + * Name: skvpd.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.15 $ + * Date: $Date: 2003/01/13 10:39:38 $ + * Purpose: Defines and Macros for VPD handling + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * skvpd.h contains Diagnostic specific defines for VPD handling + */ + +#ifndef __INC_SKVPD_H_ +#define __INC_SKVPD_H_ + +/* + * Define Resource Type Identifiers and VPD keywords + */ +#define RES_ID 0x82 /* Resource Type ID String (Product Name) */ +#define RES_VPD_R 0x90 /* start of VPD read only area */ +#define RES_VPD_W 0x91 /* start of VPD read/write area */ +#define RES_END 0x78 /* Resource Type End Tag */ + +#ifndef VPD_NAME +#define VPD_NAME "Name" /* Product Name, VPD name of RES_ID */ +#endif /* VPD_NAME */ +#define VPD_PN "PN" /* Adapter Part Number */ +#define VPD_EC "EC" /* Adapter Engineering Level */ +#define VPD_MN "MN" /* Manufacture ID */ +#define VPD_SN "SN" /* Serial Number */ +#define VPD_CP "CP" /* Extended Capability */ +#define VPD_RV "RV" /* Checksum and Reserved */ +#define VPD_YA "YA" /* Asset Tag Identifier */ +#define VPD_VL "VL" /* First Error Log Message (SK specific) */ +#define VPD_VF "VF" /* Second Error Log Message (SK specific) */ +#define VPD_RW "RW" /* Remaining Read / Write Area */ + +/* 'type' values for vpd_setup_para() */ +#define VPD_RO_KEY 1 /* RO keys are "PN", "EC", "MN", "SN", "RV" */ +#define VPD_RW_KEY 2 /* RW keys are "Yx", "Vx", and "RW" */ + +/* 'op' values for vpd_setup_para() */ +#define ADD_KEY 1 /* add the key at the pos "RV" or "RW" */ +#define OWR_KEY 2 /* overwrite key if already exists */ + +/* + * Define READ and WRITE Constants. + */ + +#define VPD_DEV_ID_GENESIS 0x4300 + +#define VPD_SIZE_YUKON 256 +#define VPD_SIZE_GENESIS 512 +#define VPD_SIZE 512 +#define VPD_READ 0x0000 +#define VPD_WRITE 0x8000 + +#define VPD_STOP(pAC,IoC) VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE) + +#define VPD_GET_RES_LEN(p) ((unsigned int) \ + (* (SK_U8 *)&(p)[1]) |\ + ((* (SK_U8 *)&(p)[2]) << 8)) +#define VPD_GET_VPD_LEN(p) ((unsigned int)(* (SK_U8 *)&(p)[2])) +#define VPD_GET_VAL(p) ((char *)&(p)[3]) + +#define VPD_MAX_LEN 50 + +/* VPD status */ + /* bit 7..1 reserved */ +#define VPD_VALID (1<<0) /* VPD data buffer, vpd_free_ro, */ + /* and vpd_free_rw valid */ + +/* + * VPD structs + */ +typedef struct s_vpd_status { + unsigned short Align01; /* Alignment */ + unsigned short vpd_status; /* VPD status, description see above */ + int vpd_free_ro; /* unused bytes in read only area */ + int vpd_free_rw; /* bytes available in read/write area */ +} SK_VPD_STATUS; + +typedef struct s_vpd { + SK_VPD_STATUS v; /* VPD status structure */ + char vpd_buf[VPD_SIZE]; /* VPD buffer */ + int rom_size; /* VPD ROM Size from PCI_OUR_REG_2 */ + int vpd_size; /* saved VPD-size */ +} SK_VPD; + +typedef struct s_vpd_para { + unsigned int p_len; /* parameter length */ + char *p_val; /* points to the value */ +} SK_VPD_PARA; + +/* + * structure of Large Resource Type Identifiers + */ + +/* was removed because of alignment problems */ + +/* + * structure of VPD keywords + */ +typedef struct s_vpd_key { + char p_key[2]; /* 2 bytes ID string */ + unsigned char p_len; /* 1 byte length */ + char p_val; /* start of the value string */ +} SK_VPD_KEY; + + +/* + * System specific VPD macros + */ +#ifndef SKDIAG +#ifndef VPD_DO_IO +#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val) +#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val) +#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal) +#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal) +#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal) +#else /* VPD_DO_IO */ +#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val) +#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val) +#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal) +#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal) +#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal) +#endif /* VPD_DO_IO */ +#else /* SKDIAG */ +#define VPD_OUT8(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgByte(pAC,Addr,Val); \ + else \ + SK_OUT8(pAC,PCI_C(Addr),Val); \ + } +#define VPD_OUT16(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgWord(pAC,Addr,Val); \ + else \ + SK_OUT16(pAC,PCI_C(Addr),Val); \ + } +#define VPD_IN8(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgByte(pAC,Addr,pVal); \ + else \ + SK_IN8(pAC,PCI_C(Addr),pVal); \ + } +#define VPD_IN16(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgWord(pAC,Addr,pVal); \ + else \ + SK_IN16(pAC,PCI_C(Addr),pVal); \ + } +#define VPD_IN32(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgDWord(pAC,Addr,pVal); \ + else \ + SK_IN32(pAC,PCI_C(Addr),pVal); \ + } +#endif /* nSKDIAG */ + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO +#ifdef SKDIAG +extern SK_U32 VpdReadDWord( + SK_AC *pAC, + SK_IOC IoC, + int addr); +#endif /* SKDIAG */ + +extern SK_VPD_STATUS *VpdStat( + SK_AC *pAC, + SK_IOC IoC); + +extern int VpdKeys( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int *len, + int *elements); + +extern int VpdRead( + SK_AC *pAC, + SK_IOC IoC, + const char *key, + char *buf, + int *len); + +extern SK_BOOL VpdMayWrite( + char *key); + +extern int VpdWrite( + SK_AC *pAC, + SK_IOC IoC, + const char *key, + const char *buf); + +extern int VpdDelete( + SK_AC *pAC, + SK_IOC IoC, + char *key); + +extern int VpdUpdate( + SK_AC *pAC, + SK_IOC IoC); + +#ifdef SKDIAG +extern int VpdReadBlock( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int addr, + int len); + +extern int VpdWriteBlock( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int addr, + int len); +#endif /* SKDIAG */ +#else /* SK_KR_PROTO */ +extern SK_U32 VpdReadDWord(); +extern SK_VPD_STATUS *VpdStat(); +extern int VpdKeys(); +extern int VpdRead(); +extern SK_BOOL VpdMayWrite(); +extern int VpdWrite(); +extern int VpdDelete(); +extern int VpdUpdate(); +#endif /* SK_KR_PROTO */ + +#endif /* __INC_SKVPD_H_ */ diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h new file mode 100644 index 00000000000..7f8e6d0084c --- /dev/null +++ b/drivers/net/sk98lin/h/xmac_ii.h @@ -0,0 +1,1579 @@ +/****************************************************************************** + * + * Name: xmac_ii.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.52 $ + * Date: $Date: 2003/10/02 16:35:50 $ + * Purpose: Defines and Macros for Gigabit Ethernet Controller + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_XMAC_H +#define __INC_XMAC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* + * XMAC II registers + * + * The XMAC registers are 16 or 32 bits wide. + * The XMACs host processor interface is set to 16 bit mode, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * The following macros are provided to access the XMAC registers + * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(), + * XM_INHASH(), and XM_OUTHASH(). + * The macros are defined in SkGeHw.h. + * + * Note: NA reg = Network Address e.g DA, SA etc. + * + */ +#define XM_MMU_CMD 0x0000 /* 16 bit r/w MMU Command Register */ + /* 0x0004: reserved */ +#define XM_POFF 0x0008 /* 32 bit r/w Packet Offset Register */ +#define XM_BURST 0x000c /* 32 bit r/w Burst Register for half duplex*/ +#define XM_1L_VLAN_TAG 0x0010 /* 16 bit r/w One Level VLAN Tag ID */ +#define XM_2L_VLAN_TAG 0x0014 /* 16 bit r/w Two Level VLAN Tag ID */ + /* 0x0018 - 0x001e: reserved */ +#define XM_TX_CMD 0x0020 /* 16 bit r/w Transmit Command Register */ +#define XM_TX_RT_LIM 0x0024 /* 16 bit r/w Transmit Retry Limit Register */ +#define XM_TX_STIME 0x0028 /* 16 bit r/w Transmit Slottime Register */ +#define XM_TX_IPG 0x002c /* 16 bit r/w Transmit Inter Packet Gap */ +#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */ +#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */ +#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */ + /* 0x003c: reserved */ +#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */ +#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */ +#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */ +#define XM_HW_CFG 0x004c /* 16 bit r/w Hardware Config Register */ + /* 0x0050 - 0x005e: reserved */ +#define XM_TX_LO_WM 0x0060 /* 16 bit r/w Tx FIFO Low Water Mark */ +#define XM_TX_HI_WM 0x0062 /* 16 bit r/w Tx FIFO High Water Mark */ +#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */ +#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */ +#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */ + /* 0x006e: reserved */ +#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */ +#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */ +#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/ +#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */ + + /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */ + /* use the XM_EXM() macro to address */ +#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */ + + /* + * XM_EXM(Reg) + * + * returns the XMAC address offset of specified Exact Match Addr Reg + * + * para: Reg EXM register to addr (0 .. 15) + * + * usage: XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]); + */ +#define XM_EXM(Reg) (XM_EXM_START + ((Reg) << 3)) + +#define XM_SRC_CHK 0x0100 /* NA reg r/w Source Check Address Register */ +#define XM_SA 0x0108 /* NA reg r/w Station Address Register */ +#define XM_HSM 0x0110 /* 64 bit r/w Hash Match Address Registers */ +#define XM_RX_LO_WM 0x0118 /* 16 bit r/w Receive Low Water Mark */ +#define XM_RX_HI_WM 0x011a /* 16 bit r/w Receive High Water Mark */ +#define XM_RX_THR 0x011c /* 32 bit r/w Receive Request Threshold */ +#define XM_DEV_ID 0x0120 /* 32 bit r/o Device ID Register */ +#define XM_MODE 0x0124 /* 32 bit r/w Mode Register */ +#define XM_LSA 0x0128 /* NA reg r/o Last Source Register */ + /* 0x012e: reserved */ +#define XM_TS_READ 0x0130 /* 32 bit r/o Time Stamp Read Register */ +#define XM_TS_LOAD 0x0134 /* 32 bit r/o Time Stamp Load Value */ + /* 0x0138 - 0x01fe: reserved */ +#define XM_STAT_CMD 0x0200 /* 16 bit r/w Statistics Command Register */ +#define XM_RX_CNT_EV 0x0204 /* 32 bit r/o Rx Counter Event Register */ +#define XM_TX_CNT_EV 0x0208 /* 32 bit r/o Tx Counter Event Register */ +#define XM_RX_EV_MSK 0x020c /* 32 bit r/w Rx Counter Event Mask */ +#define XM_TX_EV_MSK 0x0210 /* 32 bit r/w Tx Counter Event Mask */ + /* 0x0204 - 0x027e: reserved */ +#define XM_TXF_OK 0x0280 /* 32 bit r/o Frames Transmitted OK Conuter */ +#define XM_TXO_OK_HI 0x0284 /* 32 bit r/o Octets Transmitted OK High Cnt*/ +#define XM_TXO_OK_LO 0x0288 /* 32 bit r/o Octets Transmitted OK Low Cnt */ +#define XM_TXF_BC_OK 0x028c /* 32 bit r/o Broadcast Frames Xmitted OK */ +#define XM_TXF_MC_OK 0x0290 /* 32 bit r/o Multicast Frames Xmitted OK */ +#define XM_TXF_UC_OK 0x0294 /* 32 bit r/o Unicast Frames Xmitted OK */ +#define XM_TXF_LONG 0x0298 /* 32 bit r/o Tx Long Frame Counter */ +#define XM_TXE_BURST 0x029c /* 32 bit r/o Tx Burst Event Counter */ +#define XM_TXF_MPAUSE 0x02a0 /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */ +#define XM_TXF_MCTRL 0x02a4 /* 32 bit r/o Tx MAC Ctrl Frame Counter */ +#define XM_TXF_SNG_COL 0x02a8 /* 32 bit r/o Tx Single Collision Counter */ +#define XM_TXF_MUL_COL 0x02ac /* 32 bit r/o Tx Multiple Collision Counter */ +#define XM_TXF_ABO_COL 0x02b0 /* 32 bit r/o Tx aborted due to Exces. Col. */ +#define XM_TXF_LAT_COL 0x02b4 /* 32 bit r/o Tx Late Collision Counter */ +#define XM_TXF_DEF 0x02b8 /* 32 bit r/o Tx Deferred Frame Counter */ +#define XM_TXF_EX_DEF 0x02bc /* 32 bit r/o Tx Excessive Deferall Counter */ +#define XM_TXE_FIFO_UR 0x02c0 /* 32 bit r/o Tx FIFO Underrun Event Cnt */ +#define XM_TXE_CS_ERR 0x02c4 /* 32 bit r/o Tx Carrier Sense Error Cnt */ +#define XM_TXP_UTIL 0x02c8 /* 32 bit r/o Tx Utilization in % */ + /* 0x02cc - 0x02ce: reserved */ +#define XM_TXF_64B 0x02d0 /* 32 bit r/o 64 Byte Tx Frame Counter */ +#define XM_TXF_127B 0x02d4 /* 32 bit r/o 65-127 Byte Tx Frame Counter */ +#define XM_TXF_255B 0x02d8 /* 32 bit r/o 128-255 Byte Tx Frame Counter */ +#define XM_TXF_511B 0x02dc /* 32 bit r/o 256-511 Byte Tx Frame Counter */ +#define XM_TXF_1023B 0x02e0 /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/ +#define XM_TXF_MAX_SZ 0x02e4 /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/ + /* 0x02e8 - 0x02fe: reserved */ +#define XM_RXF_OK 0x0300 /* 32 bit r/o Frames Received OK */ +#define XM_RXO_OK_HI 0x0304 /* 32 bit r/o Octets Received OK High Cnt */ +#define XM_RXO_OK_LO 0x0308 /* 32 bit r/o Octets Received OK Low Counter*/ +#define XM_RXF_BC_OK 0x030c /* 32 bit r/o Broadcast Frames Received OK */ +#define XM_RXF_MC_OK 0x0310 /* 32 bit r/o Multicast Frames Received OK */ +#define XM_RXF_UC_OK 0x0314 /* 32 bit r/o Unicast Frames Received OK */ +#define XM_RXF_MPAUSE 0x0318 /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */ +#define XM_RXF_MCTRL 0x031c /* 32 bit r/o Rx MAC Ctrl Frame Counter */ +#define XM_RXF_INV_MP 0x0320 /* 32 bit r/o Rx invalid Pause Frame Cnt */ +#define XM_RXF_INV_MOC 0x0324 /* 32 bit r/o Rx Frames with inv. MAC Opcode*/ +#define XM_RXE_BURST 0x0328 /* 32 bit r/o Rx Burst Event Counter */ +#define XM_RXE_FMISS 0x032c /* 32 bit r/o Rx Missed Frames Event Cnt */ +#define XM_RXF_FRA_ERR 0x0330 /* 32 bit r/o Rx Framing Error Counter */ +#define XM_RXE_FIFO_OV 0x0334 /* 32 bit r/o Rx FIFO overflow Event Cnt */ +#define XM_RXF_JAB_PKT 0x0338 /* 32 bit r/o Rx Jabber Packet Frame Cnt */ +#define XM_RXE_CAR_ERR 0x033c /* 32 bit r/o Rx Carrier Event Error Cnt */ +#define XM_RXF_LEN_ERR 0x0340 /* 32 bit r/o Rx in Range Length Error */ +#define XM_RXE_SYM_ERR 0x0344 /* 32 bit r/o Rx Symbol Error Counter */ +#define XM_RXE_SHT_ERR 0x0348 /* 32 bit r/o Rx Short Event Error Cnt */ +#define XM_RXE_RUNT 0x034c /* 32 bit r/o Rx Runt Event Counter */ +#define XM_RXF_LNG_ERR 0x0350 /* 32 bit r/o Rx Frame too Long Error Cnt */ +#define XM_RXF_FCS_ERR 0x0354 /* 32 bit r/o Rx Frame Check Seq. Error Cnt */ + /* 0x0358 - 0x035a: reserved */ +#define XM_RXF_CEX_ERR 0x035c /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/ +#define XM_RXP_UTIL 0x0360 /* 32 bit r/o Rx Utilization in % */ + /* 0x0364 - 0x0366: reserved */ +#define XM_RXF_64B 0x0368 /* 32 bit r/o 64 Byte Rx Frame Counter */ +#define XM_RXF_127B 0x036c /* 32 bit r/o 65-127 Byte Rx Frame Counter */ +#define XM_RXF_255B 0x0370 /* 32 bit r/o 128-255 Byte Rx Frame Counter */ +#define XM_RXF_511B 0x0374 /* 32 bit r/o 256-511 Byte Rx Frame Counter */ +#define XM_RXF_1023B 0x0378 /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/ +#define XM_RXF_MAX_SZ 0x037c /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/ + /* 0x02e8 - 0x02fe: reserved */ + + +/*----------------------------------------------------------------------------*/ +/* + * XMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (ro) read only + */ + +/* XM_MMU_CMD 16 bit r/w MMU Command Register */ + /* Bit 15..13: reserved */ +#define XM_MMU_PHY_RDY (1<<12) /* Bit 12: PHY Read Ready */ +#define XM_MMU_PHY_BUSY (1<<11) /* Bit 11: PHY Busy */ +#define XM_MMU_IGN_PF (1<<10) /* Bit 10: Ignore Pause Frame */ +#define XM_MMU_MAC_LB (1<<9) /* Bit 9: Enable MAC Loopback */ + /* Bit 8: reserved */ +#define XM_MMU_FRC_COL (1<<7) /* Bit 7: Force Collision */ +#define XM_MMU_SIM_COL (1<<6) /* Bit 6: Simulate Collision */ +#define XM_MMU_NO_PRE (1<<5) /* Bit 5: No MDIO Preamble */ +#define XM_MMU_GMII_FD (1<<4) /* Bit 4: GMII uses Full Duplex */ +#define XM_MMU_RAT_CTRL (1<<3) /* Bit 3: Enable Rate Control */ +#define XM_MMU_GMII_LOOP (1<<2) /* Bit 2: PHY is in Loopback Mode */ +#define XM_MMU_ENA_RX (1<<1) /* Bit 1: Enable Receiver */ +#define XM_MMU_ENA_TX (1<<0) /* Bit 0: Enable Transmitter */ + + +/* XM_TX_CMD 16 bit r/w Transmit Command Register */ + /* Bit 15..7: reserved */ +#define XM_TX_BK2BK (1<<6) /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/ +#define XM_TX_ENC_BYP (1<<5) /* Bit 5: Set Encoder in Bypass Mode */ +#define XM_TX_SAM_LINE (1<<4) /* Bit 4: (sc) Start utilization calculation */ +#define XM_TX_NO_GIG_MD (1<<3) /* Bit 3: Disable Carrier Extension */ +#define XM_TX_NO_PRE (1<<2) /* Bit 2: Disable Preamble Generation */ +#define XM_TX_NO_CRC (1<<1) /* Bit 1: Disable CRC Generation */ +#define XM_TX_AUTO_PAD (1<<0) /* Bit 0: Enable Automatic Padding */ + + +/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */ + /* Bit 15..5: reserved */ +#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */ + + +/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */ + /* Bit 15..7: reserved */ +#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */ + + +/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */ + /* Bit 15..8: reserved */ +#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */ + + +/* XM_RX_CMD 16 bit r/w Receive Command Register */ + /* Bit 15..9: reserved */ +#define XM_RX_LENERR_OK (1<<8) /* Bit 8 don't set Rx Err bit for */ + /* inrange error packets */ +#define XM_RX_BIG_PK_OK (1<<7) /* Bit 7 don't set Rx Err bit for */ + /* jumbo packets */ +#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */ +#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */ +#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */ +#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */ +#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */ +#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */ +#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */ + + +/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ + /* Bit 15..5: reserved */ +#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ + + +/* XM_GP_PORT 32 bit r/w General Purpose Port Register */ + /* Bit 31..7: reserved */ +#define XM_GP_ANIP (1L<<6) /* Bit 6: (ro) Auto-Neg. in progress */ +#define XM_GP_FRC_INT (1L<<5) /* Bit 5: (sc) Force Interrupt */ + /* Bit 4: reserved */ +#define XM_GP_RES_MAC (1L<<3) /* Bit 3: (sc) Reset MAC and FIFOs */ +#define XM_GP_RES_STAT (1L<<2) /* Bit 2: (sc) Reset the statistics module */ + /* Bit 1: reserved */ +#define XM_GP_INP_ASS (1L<<0) /* Bit 0: (ro) GP Input Pin asserted */ + + +/* XM_IMSK 16 bit r/w Interrupt Mask Register */ +/* XM_ISRC 16 bit r/o Interrupt Status Register */ + /* Bit 15: reserved */ +#define XM_IS_LNK_AE (1<<14) /* Bit 14: Link Asynchronous Event */ +#define XM_IS_TX_ABORT (1<<13) /* Bit 13: Transmit Abort, late Col. etc */ +#define XM_IS_FRC_INT (1<<12) /* Bit 12: Force INT bit set in GP */ +#define XM_IS_INP_ASS (1<<11) /* Bit 11: Input Asserted, GP bit 0 set */ +#define XM_IS_LIPA_RC (1<<10) /* Bit 10: Link Partner requests config */ +#define XM_IS_RX_PAGE (1<<9) /* Bit 9: Page Received */ +#define XM_IS_TX_PAGE (1<<8) /* Bit 8: Next Page Loaded for Transmit */ +#define XM_IS_AND (1<<7) /* Bit 7: Auto-Negotiation Done */ +#define XM_IS_TSC_OV (1<<6) /* Bit 6: Time Stamp Counter Overflow */ +#define XM_IS_RXC_OV (1<<5) /* Bit 5: Rx Counter Event Overflow */ +#define XM_IS_TXC_OV (1<<4) /* Bit 4: Tx Counter Event Overflow */ +#define XM_IS_RXF_OV (1<<3) /* Bit 3: Receive FIFO Overflow */ +#define XM_IS_TXF_UR (1<<2) /* Bit 2: Transmit FIFO Underrun */ +#define XM_IS_TX_COMP (1<<1) /* Bit 1: Frame Tx Complete */ +#define XM_IS_RX_COMP (1<<0) /* Bit 0: Frame Rx Complete */ + +#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\ + XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR)) + + +/* XM_HW_CFG 16 bit r/w Hardware Config Register */ + /* Bit 15.. 4: reserved */ +#define XM_HW_GEN_EOP (1<<3) /* Bit 3: generate End of Packet pulse */ +#define XM_HW_COM4SIG (1<<2) /* Bit 2: use Comma Detect for Sig. Det.*/ + /* Bit 1: reserved */ +#define XM_HW_GMII_MD (1<<0) /* Bit 0: GMII Interface selected */ + + +/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */ +/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */ + /* Bit 15..10 reserved */ +#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */ + +/* XM_TX_THR 16 bit r/w Tx Request Threshold */ +/* XM_HT_THR 16 bit r/w Host Request Threshold */ +/* XM_RX_THR 16 bit r/w Rx Request Threshold */ + /* Bit 15..11 reserved */ +#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */ + + +/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */ +#define XM_ST_VALID (1UL<<31) /* Bit 31: Status Valid */ +#define XM_ST_BYTE_CNT (0x3fffL<<17) /* Bit 30..17: Tx frame Length */ +#define XM_ST_RETRY_CNT (0x1fL<<12) /* Bit 16..12: Retry Count */ +#define XM_ST_EX_COL (1L<<11) /* Bit 11: Excessive Collisions */ +#define XM_ST_EX_DEF (1L<<10) /* Bit 10: Excessive Deferral */ +#define XM_ST_BURST (1L<<9) /* Bit 9: p. xmitted in burst md*/ +#define XM_ST_DEFER (1L<<8) /* Bit 8: packet was defered */ +#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */ +#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */ +#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */ +#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */ +#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */ +#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */ +#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */ +#define XM_ST_SGN_COL (1L<<0) /* Bit 0: Single Collision */ + +/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */ +/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */ + /* Bit 15..11: reserved */ +#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */ + + +/* XM_DEV_ID 32 bit r/o Device ID Register */ +#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */ +#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */ + + +/* XM_MODE 32 bit r/w Mode Register */ + /* Bit 31..27: reserved */ +#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */ +#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */ + /* extern generated */ +#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */ +#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */ + /* intern generated */ +#define XM_MD_LE_STW (1L<<22) /* Bit 22: Rx Stat Word in Little Endian */ +#define XM_MD_TX_CONT (1L<<21) /* Bit 21: Send Continuous */ +#define XM_MD_TX_PAUSE (1L<<20) /* Bit 20: (sc) Send Pause Frame */ +#define XM_MD_ATS (1L<<19) /* Bit 19: Append Time Stamp */ +#define XM_MD_SPOL_I (1L<<18) /* Bit 18: Send Pause on Low */ + /* intern generated */ +#define XM_MD_SPOH_I (1L<<17) /* Bit 17: Send Pause on High */ + /* intern generated */ +#define XM_MD_CAP (1L<<16) /* Bit 16: Check Address Pair */ +#define XM_MD_ENA_HASH (1L<<15) /* Bit 15: Enable Hashing */ +#define XM_MD_CSA (1L<<14) /* Bit 14: Check Station Address */ +#define XM_MD_CAA (1L<<13) /* Bit 13: Check Address Array */ +#define XM_MD_RX_MCTRL (1L<<12) /* Bit 12: Rx MAC Control Frame */ +#define XM_MD_RX_RUNT (1L<<11) /* Bit 11: Rx Runt Frames */ +#define XM_MD_RX_IRLE (1L<<10) /* Bit 10: Rx in Range Len Err Frame */ +#define XM_MD_RX_LONG (1L<<9) /* Bit 9: Rx Long Frame */ +#define XM_MD_RX_CRCE (1L<<8) /* Bit 8: Rx CRC Error Frame */ +#define XM_MD_RX_ERR (1L<<7) /* Bit 7: Rx Error Frame */ +#define XM_MD_DIS_UC (1L<<6) /* Bit 6: Disable Rx Unicast */ +#define XM_MD_DIS_MC (1L<<5) /* Bit 5: Disable Rx Multicast */ +#define XM_MD_DIS_BC (1L<<4) /* Bit 4: Disable Rx Broadcast */ +#define XM_MD_ENA_PROM (1L<<3) /* Bit 3: Enable Promiscuous */ +#define XM_MD_ENA_BE (1L<<2) /* Bit 2: Enable Big Endian */ +#define XM_MD_FTF (1L<<1) /* Bit 1: (sc) Flush Tx FIFO */ +#define XM_MD_FRF (1L<<0) /* Bit 0: (sc) Flush Rx FIFO */ + +#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) +#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ + XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) + +/* XM_STAT_CMD 16 bit r/w Statistics Command Register */ + /* Bit 16..6: reserved */ +#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */ +#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */ +#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */ +#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */ +#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */ +#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */ + + +/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */ +/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */ +#define XMR_MAX_SZ_OV (1UL<<31) /* Bit 31: 1024-MaxSize Rx Cnt Ov*/ +#define XMR_1023B_OV (1L<<30) /* Bit 30: 512-1023Byte Rx Cnt Ov*/ +#define XMR_511B_OV (1L<<29) /* Bit 29: 256-511 Byte Rx Cnt Ov*/ +#define XMR_255B_OV (1L<<28) /* Bit 28: 128-255 Byte Rx Cnt Ov*/ +#define XMR_127B_OV (1L<<27) /* Bit 27: 65-127 Byte Rx Cnt Ov */ +#define XMR_64B_OV (1L<<26) /* Bit 26: 64 Byte Rx Cnt Ov */ +#define XMR_UTIL_OV (1L<<25) /* Bit 25: Rx Util Cnt Overflow */ +#define XMR_UTIL_UR (1L<<24) /* Bit 24: Rx Util Cnt Underrun */ +#define XMR_CEX_ERR_OV (1L<<23) /* Bit 23: CEXT Err Cnt Ov */ + /* Bit 22: reserved */ +#define XMR_FCS_ERR_OV (1L<<21) /* Bit 21: Rx FCS Error Cnt Ov */ +#define XMR_LNG_ERR_OV (1L<<20) /* Bit 20: Rx too Long Err Cnt Ov*/ +#define XMR_RUNT_OV (1L<<19) /* Bit 19: Runt Event Cnt Ov */ +#define XMR_SHT_ERR_OV (1L<<18) /* Bit 18: Rx Short Ev Err Cnt Ov*/ +#define XMR_SYM_ERR_OV (1L<<17) /* Bit 17: Rx Sym Err Cnt Ov */ + /* Bit 16: reserved */ +#define XMR_CAR_ERR_OV (1L<<15) /* Bit 15: Rx Carr Ev Err Cnt Ov */ +#define XMR_JAB_PKT_OV (1L<<14) /* Bit 14: Rx Jabb Packet Cnt Ov */ +#define XMR_FIFO_OV (1L<<13) /* Bit 13: Rx FIFO Ov Ev Cnt Ov */ +#define XMR_FRA_ERR_OV (1L<<12) /* Bit 12: Rx Framing Err Cnt Ov */ +#define XMR_FMISS_OV (1L<<11) /* Bit 11: Rx Missed Ev Cnt Ov */ +#define XMR_BURST (1L<<10) /* Bit 10: Rx Burst Event Cnt Ov */ +#define XMR_INV_MOC (1L<<9) /* Bit 9: Rx with inv. MAC OC Ov*/ +#define XMR_INV_MP (1L<<8) /* Bit 8: Rx inv Pause Frame Ov */ +#define XMR_MCTRL_OV (1L<<7) /* Bit 7: Rx MAC Ctrl-F Cnt Ov */ +#define XMR_MPAUSE_OV (1L<<6) /* Bit 6: Rx Pause MAC Ctrl-F Ov*/ +#define XMR_UC_OK_OV (1L<<5) /* Bit 5: Rx Unicast Frame CntOv*/ +#define XMR_MC_OK_OV (1L<<4) /* Bit 4: Rx Multicast Cnt Ov */ +#define XMR_BC_OK_OV (1L<<3) /* Bit 3: Rx Broadcast Cnt Ov */ +#define XMR_OK_LO_OV (1L<<2) /* Bit 2: Octets Rx OK Low CntOv*/ +#define XMR_OK_HI_OV (1L<<1) /* Bit 1: Octets Rx OK Hi Cnt Ov*/ +#define XMR_OK_OV (1L<<0) /* Bit 0: Frames Received Ok Ov */ + +#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV) + +/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */ +/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */ + /* Bit 31..26: reserved */ +#define XMT_MAX_SZ_OV (1L<<25) /* Bit 25: 1024-MaxSize Tx Cnt Ov*/ +#define XMT_1023B_OV (1L<<24) /* Bit 24: 512-1023Byte Tx Cnt Ov*/ +#define XMT_511B_OV (1L<<23) /* Bit 23: 256-511 Byte Tx Cnt Ov*/ +#define XMT_255B_OV (1L<<22) /* Bit 22: 128-255 Byte Tx Cnt Ov*/ +#define XMT_127B_OV (1L<<21) /* Bit 21: 65-127 Byte Tx Cnt Ov */ +#define XMT_64B_OV (1L<<20) /* Bit 20: 64 Byte Tx Cnt Ov */ +#define XMT_UTIL_OV (1L<<19) /* Bit 19: Tx Util Cnt Overflow */ +#define XMT_UTIL_UR (1L<<18) /* Bit 18: Tx Util Cnt Underrun */ +#define XMT_CS_ERR_OV (1L<<17) /* Bit 17: Tx Carr Sen Err Cnt Ov*/ +#define XMT_FIFO_UR_OV (1L<<16) /* Bit 16: Tx FIFO Ur Ev Cnt Ov */ +#define XMT_EX_DEF_OV (1L<<15) /* Bit 15: Tx Ex Deferall Cnt Ov */ +#define XMT_DEF (1L<<14) /* Bit 14: Tx Deferred Cnt Ov */ +#define XMT_LAT_COL_OV (1L<<13) /* Bit 13: Tx Late Col Cnt Ov */ +#define XMT_ABO_COL_OV (1L<<12) /* Bit 12: Tx abo dueto Ex Col Ov*/ +#define XMT_MUL_COL_OV (1L<<11) /* Bit 11: Tx Mult Col Cnt Ov */ +#define XMT_SNG_COL (1L<<10) /* Bit 10: Tx Single Col Cnt Ov */ +#define XMT_MCTRL_OV (1L<<9) /* Bit 9: Tx MAC Ctrl Counter Ov*/ +#define XMT_MPAUSE (1L<<8) /* Bit 8: Tx Pause MAC Ctrl-F Ov*/ +#define XMT_BURST (1L<<7) /* Bit 7: Tx Burst Event Cnt Ov */ +#define XMT_LONG (1L<<6) /* Bit 6: Tx Long Frame Cnt Ov */ +#define XMT_UC_OK_OV (1L<<5) /* Bit 5: Tx Unicast Cnt Ov */ +#define XMT_MC_OK_OV (1L<<4) /* Bit 4: Tx Multicast Cnt Ov */ +#define XMT_BC_OK_OV (1L<<3) /* Bit 3: Tx Broadcast Cnt Ov */ +#define XMT_OK_LO_OV (1L<<2) /* Bit 2: Octets Tx OK Low CntOv*/ +#define XMT_OK_HI_OV (1L<<1) /* Bit 1: Octets Tx OK Hi Cnt Ov*/ +#define XMT_OK_OV (1L<<0) /* Bit 0: Frames Tx Ok Ov */ + +#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV) + +/* + * Receive Frame Status Encoding + */ +#define XMR_FS_LEN (0x3fffUL<<18) /* Bit 31..18: Rx Frame Length */ +#define XMR_FS_2L_VLAN (1L<<17) /* Bit 17: tagged wh 2Lev VLAN ID*/ +#define XMR_FS_1L_VLAN (1L<<16) /* Bit 16: tagged wh 1Lev VLAN ID*/ +#define XMR_FS_BC (1L<<15) /* Bit 15: Broadcast Frame */ +#define XMR_FS_MC (1L<<14) /* Bit 14: Multicast Frame */ +#define XMR_FS_UC (1L<<13) /* Bit 13: Unicast Frame */ + /* Bit 12: reserved */ +#define XMR_FS_BURST (1L<<11) /* Bit 11: Burst Mode */ +#define XMR_FS_CEX_ERR (1L<<10) /* Bit 10: Carrier Ext. Error */ +#define XMR_FS_802_3 (1L<<9) /* Bit 9: 802.3 Frame */ +#define XMR_FS_COL_ERR (1L<<8) /* Bit 8: Collision Error */ +#define XMR_FS_CAR_ERR (1L<<7) /* Bit 7: Carrier Event Error */ +#define XMR_FS_LEN_ERR (1L<<6) /* Bit 6: In-Range Length Error */ +#define XMR_FS_FRA_ERR (1L<<5) /* Bit 5: Framing Error */ +#define XMR_FS_RUNT (1L<<4) /* Bit 4: Runt Frame */ +#define XMR_FS_LNG_ERR (1L<<3) /* Bit 3: Giant (Jumbo) Frame */ +#define XMR_FS_FCS_ERR (1L<<2) /* Bit 2: Frame Check Sequ Err */ +#define XMR_FS_ERR (1L<<1) /* Bit 1: Frame Error */ +#define XMR_FS_MCTRL (1L<<0) /* Bit 0: MAC Control Packet */ + +/* + * XMR_FS_ERR will be set if + * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT, + * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR + * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue + * XMR_FS_ERR unless the corresponding bit in the Receive Command + * Register is set. + */ +#define XMR_FS_ANY_ERR XMR_FS_ERR + +/*----------------------------------------------------------------------------*/ +/* + * XMAC-PHY Registers, indirect addressed over the XMAC + */ +#define PHY_XMAC_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_XMAC_STAT 0x01 /* 16 bit r/w PHY Status Register */ +#define PHY_XMAC_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_XMAC_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_XMAC_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_XMAC_AUNE_LP 0x05 /* 16 bit r/o Link Partner Abi Reg */ +#define PHY_XMAC_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_XMAC_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_XMAC_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* 0x09 - 0x0e: reserved */ +#define PHY_XMAC_EXT_STAT 0x0f /* 16 bit r/o Ext Status Register */ +#define PHY_XMAC_RES_ABI 0x10 /* 16 bit r/o PHY Resolved Ability */ + +/*----------------------------------------------------------------------------*/ +/* + * Broadcom-PHY Registers, indirect addressed over XMAC + */ +#define PHY_BCOM_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_BCOM_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_BCOM_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_BCOM_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_BCOM_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_BCOM_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_BCOM_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_BCOM_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_BCOM_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* Broadcom-specific registers */ +#define PHY_BCOM_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ +#define PHY_BCOM_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b - 0x0e: reserved */ +#define PHY_BCOM_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_BCOM_P_EXT_CTRL 0x10 /* 16 bit r/w PHY Extended Ctrl Reg */ +#define PHY_BCOM_P_EXT_STAT 0x11 /* 16 bit r/o PHY Extended Stat Reg */ +#define PHY_BCOM_RE_CTR 0x12 /* 16 bit r/w Receive Error Counter */ +#define PHY_BCOM_FC_CTR 0x13 /* 16 bit r/w False Carrier Sense Cnt */ +#define PHY_BCOM_RNO_CTR 0x14 /* 16 bit r/w Receiver NOT_OK Cnt */ + /* 0x15 - 0x17: reserved */ +#define PHY_BCOM_AUX_CTRL 0x18 /* 16 bit r/w Auxiliary Control Reg */ +#define PHY_BCOM_AUX_STAT 0x19 /* 16 bit r/o Auxiliary Stat Summary */ +#define PHY_BCOM_INT_STAT 0x1a /* 16 bit r/o Interrupt Status Reg */ +#define PHY_BCOM_INT_MASK 0x1b /* 16 bit r/w Interrupt Mask Reg */ + /* 0x1c: reserved */ + /* 0x1d - 0x1f: test registers */ + +/*----------------------------------------------------------------------------*/ +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* Marvel-specific registers */ +#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ +#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b - 0x0e: reserved */ +#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Ctrl Reg */ +#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Stat Reg */ +#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ +#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ +#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ +#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ + /* 0x17: reserved */ +#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ +#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ +#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ +#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ +#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ + /* 0x1d - 0x1f: reserved */ + +/*----------------------------------------------------------------------------*/ +/* + * Level One-PHY Registers, indirect addressed over XMAC + */ +#define PHY_LONE_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_LONE_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_LONE_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_LONE_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_LONE_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_LONE_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_LONE_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_LONE_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_LONE_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* Level One-specific registers */ +#define PHY_LONE_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg*/ +#define PHY_LONE_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b -0x0e: reserved */ +#define PHY_LONE_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_LONE_PORT_CFG 0x10 /* 16 bit r/w Port Configuration Reg*/ +#define PHY_LONE_Q_STAT 0x11 /* 16 bit r/o Quick Status Reg */ +#define PHY_LONE_INT_ENAB 0x12 /* 16 bit r/w Interrupt Enable Reg */ +#define PHY_LONE_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_LONE_LED_CFG 0x14 /* 16 bit r/w LED Configuration Reg */ +#define PHY_LONE_PORT_CTRL 0x15 /* 16 bit r/w Port Control Reg */ +#define PHY_LONE_CIM 0x16 /* 16 bit r/o CIM Reg */ + /* 0x17 -0x1c: reserved */ + +/*----------------------------------------------------------------------------*/ +/* + * National-PHY Registers, indirect addressed over XMAC + */ +#define PHY_NAT_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_NAT_STAT 0x01 /* 16 bit r/w PHY Status Register */ +#define PHY_NAT_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_NAT_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_NAT_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_NAT_AUNE_LP 0x05 /* 16 bit r/o Link Partner Ability Reg */ +#define PHY_NAT_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_NAT_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_NAT_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner Reg */ + /* National-specific registers */ +#define PHY_NAT_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ +#define PHY_NAT_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b -0x0e: reserved */ +#define PHY_NAT_EXT_STAT 0x0f /* 16 bit r/o Extended Status Register */ +#define PHY_NAT_EXT_CTRL1 0x10 /* 16 bit r/o Extended Control Reg1 */ +#define PHY_NAT_Q_STAT1 0x11 /* 16 bit r/o Quick Status Reg1 */ +#define PHY_NAT_10B_OP 0x12 /* 16 bit r/o 10Base-T Operations Reg */ +#define PHY_NAT_EXT_CTRL2 0x13 /* 16 bit r/o Extended Control Reg1 */ +#define PHY_NAT_Q_STAT2 0x14 /* 16 bit r/o Quick Status Reg2 */ + /* 0x15 -0x18: reserved */ +#define PHY_NAT_PHY_ADDR 0x19 /* 16 bit r/o PHY Address Register */ + + +/*----------------------------------------------------------------------------*/ + +/* + * PHY bit definitions + * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are + * XMAC/Broadcom/LevelOne/National/Marvell-specific. + * All other are general. + */ + +/***** PHY_XMAC_CTRL 16 bit r/w PHY Control Register *****/ +/***** PHY_BCOM_CTRL 16 bit r/w PHY Control Register *****/ +/***** PHY_MARV_CTRL 16 bit r/w PHY Status Register *****/ +/***** PHY_LONE_CTRL 16 bit r/w PHY Control Register *****/ +#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ +#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ +#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */ +#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ +#define PHY_CT_PDOWN (1<<11) /* Bit 11: (BC,L1) Power Down Mode */ +#define PHY_CT_ISOL (1<<10) /* Bit 10: (BC,L1) Isolate Mode */ +#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ +#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ +#define PHY_CT_COL_TST (1<<7) /* Bit 7: (BC,L1) Collision Test enabled */ +#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: (BC,L1) Speed select, upper bit */ + /* Bit 5..0: reserved */ + +#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ +#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ +#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ + + +/***** PHY_XMAC_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_BCOM_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_MARV_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_LONE_STAT 16 bit r/w PHY Status Register *****/ + /* Bit 15..9: reserved */ + /* (BC/L1) 100/10 Mbps cap bits ignored*/ +#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ + /* Bit 7: reserved */ +#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: (BC/L1) preamble suppression */ +#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ +#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */ +#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ +#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ +#define PHY_ST_JAB_DET (1<<1) /* Bit 1: (BC/L1) Jabber Detected */ +#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ + + +/***** PHY_XMAC_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_BCOM_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_MARV_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_LONE_ID1 16 bit r/o PHY ID1 Register */ +#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ +#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ +#define PHY_I1_REV_MSK 0x0f /* Bit 3.. 0: Revision Number */ + +/* different Broadcom PHY Ids */ +#define PHY_BCOM_ID1_A1 0x6041 +#define PHY_BCOM_ID1_B2 0x6043 +#define PHY_BCOM_ID1_C0 0x6044 +#define PHY_BCOM_ID1_C5 0x6047 + + +/***** PHY_XMAC_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_XMAC_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +#define PHY_AN_NXT_PG (1<<15) /* Bit 15: Request Next Page */ +#define PHY_X_AN_ACK (1<<14) /* Bit 14: (ro) Acknowledge Received */ +#define PHY_X_AN_RFB (3<<12) /* Bit 13..12: Remote Fault Bits */ + /* Bit 11.. 9: reserved */ +#define PHY_X_AN_PAUSE (3<<7) /* Bit 8.. 7: Pause Bits */ +#define PHY_X_AN_HD (1<<6) /* Bit 6: Half Duplex */ +#define PHY_X_AN_FD (1<<5) /* Bit 5: Full Duplex */ + /* Bit 4.. 0: reserved */ + +/***** PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_B_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_B_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ +#define PHY_B_AN_PC (1<<10) /* Bit 10: Pause Capable */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_B_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/***** PHY_LONE_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_LONE_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_L_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_L_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ +#define PHY_L_AN_PC (1<<10) /* Bit 10: Pause Capable */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_L_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/***** PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_N_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_N_AN_100F (1<<11) /* Bit 11: 100Base-T2 FD Support */ +#define PHY_N_AN_100H (1<<10) /* Bit 10: 100Base-T2 HD Support */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_N_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/* field type definition for PHY_x_AN_SEL */ +#define PHY_SEL_TYPE 0x01 /* 00001 = Ethernet */ + +/***** PHY_XMAC_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ + /* Bit 15..4: reserved */ +#define PHY_ANE_LP_NP (1<<3) /* Bit 3: Link Partner can Next Page */ +#define PHY_ANE_LOC_NP (1<<2) /* Bit 2: Local PHY can Next Page */ +#define PHY_ANE_RX_PG (1<<1) /* Bit 1: Page Received */ + /* Bit 0: reserved */ + +/***** PHY_BCOM_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ +/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ +/***** PHY_MARV_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ + /* Bit 15..5: reserved */ +#define PHY_ANE_PAR_DF (1<<4) /* Bit 4: Parallel Detection Fault */ +/* PHY_ANE_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ +/* PHY_ANE_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ +/* PHY_ANE_RX_PG (see XMAC) Bit 1: Page Received */ +#define PHY_ANE_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ + +/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_BCOM_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_LONE_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_XMAC_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +/***** PHY_BCOM_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +/***** PHY_LONE_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +#define PHY_NP_MORE (1<<15) /* Bit 15: More, Next Pages to follow */ +#define PHY_NP_ACK1 (1<<14) /* Bit 14: (ro) Ack1, for receiving a message */ +#define PHY_NP_MSG_VAL (1<<13) /* Bit 13: Message Page valid */ +#define PHY_NP_ACK2 (1<<12) /* Bit 12: Ack2, comply with msg content */ +#define PHY_NP_TOG (1<<11) /* Bit 11: Toggle Bit, ensure sync */ +#define PHY_NP_MSG 0x07ff /* Bit 10..0: Message from/to Link Partner */ + +/* + * XMAC-Specific + */ +/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/ +#define PHY_X_EX_FD (1<<15) /* Bit 15: Device Supports Full Duplex */ +#define PHY_X_EX_HD (1<<14) /* Bit 14: Device Supports Half Duplex */ + /* Bit 13..0: reserved */ + +/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/ + /* Bit 15..9: reserved */ +#define PHY_X_RS_PAUSE (3<<7) /* Bit 8..7: selected Pause Mode */ +#define PHY_X_RS_HD (1<<6) /* Bit 6: Half Duplex Mode selected */ +#define PHY_X_RS_FD (1<<5) /* Bit 5: Full Duplex Mode selected */ +#define PHY_X_RS_ABLMIS (1<<4) /* Bit 4: duplex or pause cap mismatch */ +#define PHY_X_RS_PAUMIS (1<<3) /* Bit 3: pause capability mismatch */ + /* Bit 2..0: reserved */ +/* + * Remote Fault Bits (PHY_X_AN_RFB) encoding + */ +#define X_RFB_OK (0<<12) /* Bit 13..12 No errors, Link OK */ +#define X_RFB_LF (1<<12) /* Bit 13..12 Link Failure */ +#define X_RFB_OFF (2<<12) /* Bit 13..12 Offline */ +#define X_RFB_AN_ERR (3<<12) /* Bit 13..12 Auto-Negotiation Error */ + +/* + * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding + */ +#define PHY_X_P_NO_PAUSE (0<<7) /* Bit 8..7: no Pause Mode */ +#define PHY_X_P_SYM_MD (1<<7) /* Bit 8..7: symmetric Pause Mode */ +#define PHY_X_P_ASYM_MD (2<<7) /* Bit 8..7: asymmetric Pause Mode */ +#define PHY_X_P_BOTH_MD (3<<7) /* Bit 8..7: both Pause Mode */ + + +/* + * Broadcom-Specific + */ +/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_B_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_B_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_B_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_B_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_B_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_B_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ +#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_B_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_B_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_B_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_B_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/ +#define PHY_B_PEC_MAC_PHY (1<<15) /* Bit 15: 10BIT/GMI-Interface */ +#define PHY_B_PEC_DIS_CROSS (1<<14) /* Bit 14: Disable MDI Crossover */ +#define PHY_B_PEC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ +#define PHY_B_PEC_INT_DIS (1<<12) /* Bit 12: Interrupts Disabled */ +#define PHY_B_PEC_F_INT (1<<11) /* Bit 11: Force Interrupt */ +#define PHY_B_PEC_BY_45 (1<<10) /* Bit 10: Bypass 4B5B-Decoder */ +#define PHY_B_PEC_BY_SCR (1<<9) /* Bit 9: Bypass Scrambler */ +#define PHY_B_PEC_BY_MLT3 (1<<8) /* Bit 8: Bypass MLT3 Encoder */ +#define PHY_B_PEC_BY_RXA (1<<7) /* Bit 7: Bypass Rx Alignm. */ +#define PHY_B_PEC_RES_SCR (1<<6) /* Bit 6: Reset Scrambler */ +#define PHY_B_PEC_EN_LTR (1<<5) /* Bit 5: Ena LED Traffic Mode */ +#define PHY_B_PEC_LED_ON (1<<4) /* Bit 4: Force LED's on */ +#define PHY_B_PEC_LED_OFF (1<<3) /* Bit 3: Force LED's off */ +#define PHY_B_PEC_EX_IPG (1<<2) /* Bit 2: Extend Tx IPG Mode */ +#define PHY_B_PEC_3_LED (1<<1) /* Bit 1: Three Link LED mode */ +#define PHY_B_PEC_HIGH_LA (1<<0) /* Bit 0: GMII FIFO Elasticy */ + +/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/ + /* Bit 15..14: reserved */ +#define PHY_B_PES_CROSS_STAT (1<<13) /* Bit 13: MDI Crossover Status */ +#define PHY_B_PES_INT_STAT (1<<12) /* Bit 12: Interrupt Status */ +#define PHY_B_PES_RRS (1<<11) /* Bit 11: Remote Receiver Stat. */ +#define PHY_B_PES_LRS (1<<10) /* Bit 10: Local Receiver Stat. */ +#define PHY_B_PES_LOCKED (1<<9) /* Bit 9: Locked */ +#define PHY_B_PES_LS (1<<8) /* Bit 8: Link Status */ +#define PHY_B_PES_RF (1<<7) /* Bit 7: Remote Fault */ +#define PHY_B_PES_CE_ER (1<<6) /* Bit 6: Carrier Ext Error */ +#define PHY_B_PES_BAD_SSD (1<<5) /* Bit 5: Bad SSD */ +#define PHY_B_PES_BAD_ESD (1<<4) /* Bit 4: Bad ESD */ +#define PHY_B_PES_RX_ER (1<<3) /* Bit 3: Receive Error */ +#define PHY_B_PES_TX_ER (1<<2) /* Bit 2: Transmit Error */ +#define PHY_B_PES_LOCK_ER (1<<1) /* Bit 1: Lock Error */ +#define PHY_B_PES_MLT3_ER (1<<0) /* Bit 0: MLT3 code Error */ + +/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ + /* Bit 15..8: reserved */ +#define PHY_B_FC_CTR 0xff /* Bit 7..0: False Carrier Counter */ + +/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/ +#define PHY_B_RC_LOC_MSK 0xff00 /* Bit 15..8: Local Rx NOT_OK cnt */ +#define PHY_B_RC_REM_MSK 0x00ff /* Bit 7..0: Remote Rx NOT_OK cnt */ + +/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/ +#define PHY_B_AC_L_SQE (1<<15) /* Bit 15: Low Squelch */ +#define PHY_B_AC_LONG_PACK (1<<14) /* Bit 14: Rx Long Packets */ +#define PHY_B_AC_ER_CTRL (3<<12) /* Bit 13..12: Edgerate Control */ + /* Bit 11: reserved */ +#define PHY_B_AC_TX_TST (1<<10) /* Bit 10: Tx test bit, always 1 */ + /* Bit 9.. 8: reserved */ +#define PHY_B_AC_DIS_PRF (1<<7) /* Bit 7: dis part resp filter */ + /* Bit 6: reserved */ +#define PHY_B_AC_DIS_PM (1<<5) /* Bit 5: dis power management */ + /* Bit 4: reserved */ +#define PHY_B_AC_DIAG (1<<3) /* Bit 3: Diagnostic Mode */ + /* Bit 2.. 0: reserved */ + +/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/ +#define PHY_B_AS_AN_C (1<<15) /* Bit 15: AutoNeg complete */ +#define PHY_B_AS_AN_CA (1<<14) /* Bit 14: AN Complete Ack */ +#define PHY_B_AS_ANACK_D (1<<13) /* Bit 13: AN Ack Detect */ +#define PHY_B_AS_ANAB_D (1<<12) /* Bit 12: AN Ability Detect */ +#define PHY_B_AS_NPW (1<<11) /* Bit 11: AN Next Page Wait */ +#define PHY_B_AS_AN_RES_MSK (7<<8) /* Bit 10..8: AN HDC */ +#define PHY_B_AS_PDF (1<<7) /* Bit 7: Parallel Detect. Fault */ +#define PHY_B_AS_RF (1<<6) /* Bit 6: Remote Fault */ +#define PHY_B_AS_ANP_R (1<<5) /* Bit 5: AN Page Received */ +#define PHY_B_AS_LP_ANAB (1<<4) /* Bit 4: LP AN Ability */ +#define PHY_B_AS_LP_NPAB (1<<3) /* Bit 3: LP Next Page Ability */ +#define PHY_B_AS_LS (1<<2) /* Bit 2: Link Status */ +#define PHY_B_AS_PRR (1<<1) /* Bit 1: Pause Resolution-Rx */ +#define PHY_B_AS_PRT (1<<0) /* Bit 0: Pause Resolution-Tx */ + +#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT) + +/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ + /* Bit 15: reserved */ +#define PHY_B_IS_PSE (1<<14) /* Bit 14: Pair Swap Error */ +#define PHY_B_IS_MDXI_SC (1<<13) /* Bit 13: MDIX Status Change */ +#define PHY_B_IS_HCT (1<<12) /* Bit 12: counter above 32k */ +#define PHY_B_IS_LCT (1<<11) /* Bit 11: counter above 128 */ +#define PHY_B_IS_AN_PR (1<<10) /* Bit 10: Page Received */ +#define PHY_B_IS_NO_HDCL (1<<9) /* Bit 9: No HCD Link */ +#define PHY_B_IS_NO_HDC (1<<8) /* Bit 8: No HCD */ +#define PHY_B_IS_NEG_USHDC (1<<7) /* Bit 7: Negotiated Unsup. HCD */ +#define PHY_B_IS_SCR_S_ER (1<<6) /* Bit 6: Scrambler Sync Error */ +#define PHY_B_IS_RRS_CHANGE (1<<5) /* Bit 5: Remote Rx Stat Change */ +#define PHY_B_IS_LRS_CHANGE (1<<4) /* Bit 4: Local Rx Stat Change */ +#define PHY_B_IS_DUP_CHANGE (1<<3) /* Bit 3: Duplex Mode Change */ +#define PHY_B_IS_LSP_CHANGE (1<<2) /* Bit 2: Link Speed Change */ +#define PHY_B_IS_LST_CHANGE (1<<1) /* Bit 1: Link Status Changed */ +#define PHY_B_IS_CRC_ER (1<<0) /* Bit 0: CRC Error */ + +#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + +/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ +#define PHY_B_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ +#define PHY_B_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ +#define PHY_B_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ +#define PHY_B_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ + +/* + * Resolved Duplex mode and Capabilities (Aux Status Summary Reg) + */ +#define PHY_B_RES_1000FD (7<<8) /* Bit 10..8: 1000Base-T Full Dup. */ +#define PHY_B_RES_1000HD (6<<8) /* Bit 10..8: 1000Base-T Half Dup. */ +/* others: 100/10: invalid for us */ + +/* + * Level One-Specific + */ +/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_L_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_L_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_L_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_L_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_L_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_L_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_L_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_L_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_L_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_L_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ +#define PHY_L_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_L_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_L_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_L_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_L_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_L_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ +#define PHY_L_PC_REP_MODE (1<<15) /* Bit 15: Repeater Mode */ + /* Bit 14: reserved */ +#define PHY_L_PC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ +#define PHY_L_PC_BY_SCR (1<<12) /* Bit 12: Bypass Scrambler */ +#define PHY_L_PC_BY_45 (1<<11) /* Bit 11: Bypass 4B5B-Decoder */ +#define PHY_L_PC_JAB_DIS (1<<10) /* Bit 10: Jabber Disabled */ +#define PHY_L_PC_SQE (1<<9) /* Bit 9: Enable Heartbeat */ +#define PHY_L_PC_TP_LOOP (1<<8) /* Bit 8: TP Loopback */ +#define PHY_L_PC_SSS (1<<7) /* Bit 7: Smart Speed Selection */ +#define PHY_L_PC_FIFO_SIZE (1<<6) /* Bit 6: FIFO Size */ +#define PHY_L_PC_PRE_EN (1<<5) /* Bit 5: Preamble Enable */ +#define PHY_L_PC_CIM (1<<4) /* Bit 4: Carrier Integrity Mon */ +#define PHY_L_PC_10_SER (1<<3) /* Bit 3: Use Serial Output */ +#define PHY_L_PC_ANISOL (1<<2) /* Bit 2: Unisolate Port */ +#define PHY_L_PC_TEN_BIT (1<<1) /* Bit 1: 10bit iface mode on */ +#define PHY_L_PC_ALTCLOCK (1<<0) /* Bit 0: (ro) ALTCLOCK Mode on */ + +/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ +#define PHY_L_QS_D_RATE (3<<14) /* Bit 15..14: Data Rate */ +#define PHY_L_QS_TX_STAT (1<<13) /* Bit 13: Transmitting */ +#define PHY_L_QS_RX_STAT (1<<12) /* Bit 12: Receiving */ +#define PHY_L_QS_COL_STAT (1<<11) /* Bit 11: Collision */ +#define PHY_L_QS_L_STAT (1<<10) /* Bit 10: Link is up */ +#define PHY_L_QS_DUP_MOD (1<<9) /* Bit 9: Full/Half Duplex */ +#define PHY_L_QS_AN (1<<8) /* Bit 8: AutoNeg is On */ +#define PHY_L_QS_AN_C (1<<7) /* Bit 7: AN is Complete */ +#define PHY_L_QS_LLE (7<<4) /* Bit 6: Line Length Estim. */ +#define PHY_L_QS_PAUSE (1<<3) /* Bit 3: LP advertised Pause */ +#define PHY_L_QS_AS_PAUSE (1<<2) /* Bit 2: LP adv. asym. Pause */ +#define PHY_L_QS_ISOLATE (1<<1) /* Bit 1: CIM Isolated */ +#define PHY_L_QS_EVENT (1<<0) /* Bit 0: Event has occurred */ + +/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ +/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ + /* Bit 15..14: reserved */ +#define PHY_L_IS_AN_F (1<<13) /* Bit 13: Auto-Negotiation fault */ + /* Bit 12: not described */ +#define PHY_L_IS_CROSS (1<<11) /* Bit 11: Crossover used */ +#define PHY_L_IS_POL (1<<10) /* Bit 10: Polarity correct. used */ +#define PHY_L_IS_SS (1<<9) /* Bit 9: Smart Speed Downgrade */ +#define PHY_L_IS_CFULL (1<<8) /* Bit 8: Counter Full */ +#define PHY_L_IS_AN_C (1<<7) /* Bit 7: AutoNeg Complete */ +#define PHY_L_IS_SPEED (1<<6) /* Bit 6: Speed Changed */ +#define PHY_L_IS_DUP (1<<5) /* Bit 5: Duplex Changed */ +#define PHY_L_IS_LS (1<<4) /* Bit 4: Link Status Changed */ +#define PHY_L_IS_ISOL (1<<3) /* Bit 3: Isolate Occured */ +#define PHY_L_IS_MDINT (1<<2) /* Bit 2: (ro) STAT: MII Int Pending */ +#define PHY_L_IS_INTEN (1<<1) /* Bit 1: ENAB: Enable IRQs */ +#define PHY_L_IS_FORCE (1<<0) /* Bit 0: ENAB: Force Interrupt */ + +/* int. mask */ +#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) + +/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ +#define PHY_L_LC_LEDC (3<<14) /* Bit 15..14: Col/Blink/On/Off */ +#define PHY_L_LC_LEDR (3<<12) /* Bit 13..12: Rx/Blink/On/Off */ +#define PHY_L_LC_LEDT (3<<10) /* Bit 11..10: Tx/Blink/On/Off */ +#define PHY_L_LC_LEDG (3<<8) /* Bit 9..8: Giga/Blink/On/Off */ +#define PHY_L_LC_LEDS (3<<6) /* Bit 7..6: 10-100/Blink/On/Off */ +#define PHY_L_LC_LEDL (3<<4) /* Bit 5..4: Link/Blink/On/Off */ +#define PHY_L_LC_LEDF (3<<2) /* Bit 3..2: Duplex/Blink/On/Off */ +#define PHY_L_LC_PSTRECH (1<<1) /* Bit 1: Strech LED Pulses */ +#define PHY_L_LC_FREQ (1<<0) /* Bit 0: 30/100 ms */ + +/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ +#define PHY_L_PC_TX_TCLK (1<<15) /* Bit 15: Enable TX_TCLK */ + /* Bit 14: reserved */ +#define PHY_L_PC_ALT_NP (1<<13) /* Bit 14: Alternate Next Page */ +#define PHY_L_PC_GMII_ALT (1<<12) /* Bit 13: Alternate GMII driver */ + /* Bit 11: reserved */ +#define PHY_L_PC_TEN_CRS (1<<10) /* Bit 10: Extend CRS*/ + /* Bit 9..0: not described */ + +/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ +#define PHY_L_CIM_ISOL (255<<8)/* Bit 15..8: Isolate Count */ +#define PHY_L_CIM_FALSE_CAR (255<<0)/* Bit 7..0: False Carrier Count */ + + +/* + * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding + */ +#define PHY_L_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ +#define PHY_L_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ +#define PHY_L_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ +#define PHY_L_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ + + +/* + * National-Specific + */ +/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_N_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_N_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_N_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_N_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_N_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_N_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ +#define PHY_N_1000C_APC (1<<7) /* Bit 7: Asymmetric Pause Cap. */ + /* Bit 6..0: reserved */ + +/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_N_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_N_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_N_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_N_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/ +#define PHY_N_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_N_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ +#define PHY_N_1000C_LP_APC (1<<9) /* Bit 9: LP Asym. Pause Cap. */ + /* Bit 8: reserved */ +#define PHY_N_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_N_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_N_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_N_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_N_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/* todo: those are still missing */ +/***** PHY_NAT_EXT_CTRL1 16 bit r/o Extended Control Reg1 *****/ +/***** PHY_NAT_Q_STAT1 16 bit r/o Quick Status Reg1 *****/ +/***** PHY_NAT_10B_OP 16 bit r/o 10Base-T Operations Reg *****/ +/***** PHY_NAT_EXT_CTRL2 16 bit r/o Extended Control Reg1 *****/ +/***** PHY_NAT_Q_STAT2 16 bit r/o Quick Status Reg2 *****/ +/***** PHY_NAT_PHY_ADDR 16 bit r/o PHY Address Register *****/ + +/* + * Marvell-Specific + */ +/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ +#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ +#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ +#define PHY_M_AN_RF BIT_13 /* Remote Fault */ + /* Bit 12: reserved */ +#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ +#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ +#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ +#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ +#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */ +#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */ + +/* special defines for FIBER (88E1011S only) */ +#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ +#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ +#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ +#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ +#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ +#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ +#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_M_1000C_MSE (1<<12) /* Bit 12: Manual Master/Slave Enable */ +#define PHY_M_1000C_MSC (1<<11) /* Bit 11: M/S Configuration (1=Master) */ +#define PHY_M_1000C_MPD (1<<10) /* Bit 10: Multi-Port Device */ +#define PHY_M_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_M_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ +#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ +#define PHY_M_PC_ASS_CRS_TX (1<<11) /* Bit 11: Assert CRS on Transmit */ +#define PHY_M_PC_FL_GOOD (1<<10) /* Bit 10: Force Link Good */ +#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ +#define PHY_M_PC_ENA_EXT_D (1<<7) /* Bit 7: Enable Ext. Distance (10BT) */ +#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ +#define PHY_M_PC_DIS_125CLK (1<<4) /* Bit 4: Disable 125 CLK */ +#define PHY_M_PC_MAC_POW_UP (1<<3) /* Bit 3: MAC Power up */ +#define PHY_M_PC_SQE_T_ENA (1<<2) /* Bit 2: SQE Test Enabled */ +#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */ +#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */ + +#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */ +#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */ + +#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) +#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ +#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ +#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ +#define PHY_M_PS_SPEED_1000 (1<<15) /* 10 = 1000 Mbps */ +#define PHY_M_PS_SPEED_100 (1<<14) /* 01 = 100 Mbps */ +#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ +#define PHY_M_PS_FULL_DUP (1<<13) /* Bit 13: Full Duplex */ +#define PHY_M_PS_PAGE_REC (1<<12) /* Bit 12: Page Received */ +#define PHY_M_PS_SPDUP_RES (1<<11) /* Bit 11: Speed & Duplex Resolved */ +#define PHY_M_PS_LINK_UP (1<<10) /* Bit 10: Link Up */ +#define PHY_M_PS_CABLE_MSK (3<<7) /* Bit 9.. 7: Cable Length Mask */ +#define PHY_M_PS_MDI_X_STAT (1<<6) /* Bit 6: MDI Crossover Stat (1=MDIX) */ +#define PHY_M_PS_DOWNS_STAT (1<<5) /* Bit 5: Downshift Status (1=downsh.) */ +#define PHY_M_PS_ENDET_STAT (1<<4) /* Bit 4: Energy Detect Status (1=act) */ +#define PHY_M_PS_TX_P_EN (1<<3) /* Bit 3: Tx Pause Enabled */ +#define PHY_M_PS_RX_P_EN (1<<2) /* Bit 2: Rx Pause Enabled */ +#define PHY_M_PS_POL_REV (1<<1) /* Bit 1: Polarity Reversed */ +#define PHY_M_PC_JABBER (1<<0) /* Bit 0: Jabber */ + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ +/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +#define PHY_M_IS_AN_ERROR (1<<15) /* Bit 15: Auto-Negotiation Error */ +#define PHY_M_IS_LSP_CHANGE (1<<14) /* Bit 14: Link Speed Changed */ +#define PHY_M_IS_DUP_CHANGE (1<<13) /* Bit 13: Duplex Mode Changed */ +#define PHY_M_IS_AN_PR (1<<12) /* Bit 12: Page Received */ +#define PHY_M_IS_AN_COMPL (1<<11) /* Bit 11: Auto-Negotiation Completed */ +#define PHY_M_IS_LST_CHANGE (1<<10) /* Bit 10: Link Status Changed */ +#define PHY_M_IS_SYMB_ERROR (1<<9) /* Bit 9: Symbol Error */ +#define PHY_M_IS_FALSE_CARR (1<<8) /* Bit 8: False Carrier */ +#define PHY_M_IS_FIFO_ERROR (1<<7) /* Bit 7: FIFO Overflow/Underrun Error */ +#define PHY_M_IS_MDI_CHANGE (1<<6) /* Bit 6: MDI Crossover Changed */ +#define PHY_M_IS_DOWNSH_DET (1<<5) /* Bit 5: Downshift Detected */ +#define PHY_M_IS_END_CHANGE (1<<4) /* Bit 4: Energy Detect Changed */ + /* Bit 3..2: reserved */ +#define PHY_M_IS_POL_CHANGE (1<<1) /* Bit 1: Polarity Changed */ +#define PHY_M_IS_JABBER (1<<0) /* Bit 0: Jabber */ + +#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \ + PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master downshift counter */ +#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave downshift counter */ +#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ +#define PHY_M_EC_FIB_AN_ENA (1<<3) /* Bit 3: Fiber Auto-Neg. Enable */ + +#define PHY_M_EC_M_DSC(x) SHIFT10(x) /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) SHIFT8(x) /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) SHIFT4(x) /* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define MAC_TX_CLK_0_MHZ 2 +#define MAC_TX_CLK_2_5_MHZ 6 +#define MAC_TX_CLK_25_MHZ 7 + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +#define PHY_M_LEDC_DIS_LED (1<<15) /* Bit 15: Disable LED */ +#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ +#define PHY_M_LEDC_F_INT (1<<11) /* Bit 11: Force Interrupt */ +#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ + /* Bit 7.. 5: reserved */ +#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ +#define PHY_M_LEDC_DP_CTRL (1<<2) /* Bit 2: Duplex Control */ +#define PHY_M_LEDC_RX_CTRL (1<<1) /* Bit 1: Rx activity / Link */ +#define PHY_M_LEDC_TX_CTRL (1<<0) /* Bit 0: Tx activity / Link */ + +#define PHY_M_LED_PULS_DUR(x) SHIFT12(x) /* Pulse Stretch Duration */ + +#define PULS_NO_STR 0 /* no pulse stretching */ +#define PULS_21MS 1 /* 21 ms to 42 ms */ +#define PULS_42MS 2 /* 42 ms to 84 ms */ +#define PULS_84MS 3 /* 84 ms to 170 ms */ +#define PULS_170MS 4 /* 170 ms to 340 ms */ +#define PULS_340MS 5 /* 340 ms to 670 ms */ +#define PULS_670MS 6 /* 670 ms to 1.3 s */ +#define PULS_1300MS 7 /* 1.3 s to 2.7 s */ + +#define PHY_M_LED_BLINK_RT(x) SHIFT8(x) /* Blink Rate */ + +#define BLINK_42MS 0 /* 42 ms */ +#define BLINK_84MS 1 /* 84 ms */ +#define BLINK_170MS 2 /* 170 ms */ +#define BLINK_340MS 3 /* 340 ms */ +#define BLINK_670MS 4 /* 670 ms */ + /* values 5 - 7: reserved */ + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */ + +#define MO_LED_NORM 0 +#define MO_LED_BLINK 1 +#define MO_LED_OFF 2 +#define MO_LED_ON 3 + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ + /* Bit 15.. 7: reserved */ +#define PHY_M_EC2_FI_IMPED (1<<6) /* Bit 6: Fiber Input Impedance */ +#define PHY_M_EC2_FO_IMPED (1<<5) /* Bit 5: Fiber Output Impedance */ +#define PHY_M_EC2_FO_M_CLK (1<<4) /* Bit 4: Fiber Mode Clock Enable */ +#define PHY_M_EC2_FO_BOOST (1<<3) /* Bit 3: Fiber Output Boost */ +#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +#define PHY_M_FC_AUTO_SEL (1<<15) /* Bit 15: Fiber/Copper Auto Sel. dis. */ +#define PHY_M_FC_AN_REG_ACC (1<<14) /* Bit 14: Fiber/Copper Autoneg. reg acc */ +#define PHY_M_FC_RESULUTION (1<<13) /* Bit 13: Fiber/Copper Resulution */ +#define PHY_M_SER_IF_AN_BP (1<<12) /* Bit 12: Ser IF autoneg. bypass enable */ +#define PHY_M_SER_IF_BP_ST (1<<11) /* Bit 11: Ser IF autoneg. bypass status */ +#define PHY_M_IRQ_POLARITY (1<<10) /* Bit 10: IRQ polarity */ + /* Bit 9..4: reserved */ +#define PHY_M_UNDOC1 (1<< 7) /* undocumented bit !! */ +#define PHY_M_MODE_MASK (0xf<<0)/* Bit 3..0: copy of HWCFG MODE[3:0] */ + + +/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ +#define PHY_M_CABD_ENA_TEST (1<<15) /* Bit 15: Enable Test */ +#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status */ + /* Bit 12.. 8: reserved */ +#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance */ + +/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ +#define CABD_STAT_NORMAL 0 +#define CABD_STAT_SHORT 1 +#define CABD_STAT_OPEN 2 +#define CABD_STAT_FAIL 3 + + +/* + * GMAC registers + * + * The GMAC registers are 16 or 32 bits wide. + * The GMACs host processor interface is 16 bits wide, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * The following macros are provided to access the GMAC registers + * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(), + * GM_INHASH(), and GM_OUTHASH(). + * The macros are defined in SkGeHw.h. + * + * Note: NA reg = Network Address e.g DA, SA etc. + * + */ + +/* Port Registers */ +#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ +#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ +#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ +#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ +#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */ +#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ +#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ + +/* Source Address Registers */ +#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ +#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ +#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ +#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ +#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ +#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ +#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ +#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ +#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ +#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ +#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ +#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ +#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ +#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ +#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ +#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ +#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ +#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ +#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +#define GM_RXF_UC_OK \ + (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ +#define GM_RXF_BC_OK \ + (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ +#define GM_RXF_MPAUSE \ + (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ +#define GM_RXF_MC_OK \ + (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ +#define GM_RXF_FCS_ERR \ + (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ +#define GM_RXO_OK_LO \ + (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ +#define GM_RXO_OK_HI \ + (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ +#define GM_RXO_ERR_LO \ + (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ +#define GM_RXO_ERR_HI \ + (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ +#define GM_RXF_SHT \ + (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ +#define GM_RXE_FRAG \ + (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */ +#define GM_RXF_64B \ + (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ +#define GM_RXF_127B \ + (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ +#define GM_RXF_255B \ + (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ +#define GM_RXF_511B \ + (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ +#define GM_RXF_1023B \ + (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ +#define GM_RXF_1518B \ + (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ +#define GM_RXF_MAX_SZ \ + (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ +#define GM_RXF_LNG_ERR \ + (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ +#define GM_RXF_JAB_PKT \ + (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ +#define GM_RXE_FIFO_OV \ + (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ +#define GM_TXF_UC_OK \ + (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ +#define GM_TXF_BC_OK \ + (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ +#define GM_TXF_MPAUSE \ + (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ +#define GM_TXF_MC_OK \ + (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ +#define GM_TXO_OK_LO \ + (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ +#define GM_TXO_OK_HI \ + (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ +#define GM_TXF_64B \ + (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ +#define GM_TXF_127B \ + (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ +#define GM_TXF_255B \ + (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ +#define GM_TXF_511B \ + (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ +#define GM_TXF_1023B \ + (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ +#define GM_TXF_1518B \ + (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ +#define GM_TXF_MAX_SZ \ + (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ + /* GM_MIB_CNT_BASE + 296: reserved */ +#define GM_TXF_COL \ + (GM_MIB_CNT_BASE + 304) /* Tx Collision */ +#define GM_TXF_LAT_COL \ + (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ +#define GM_TXF_ABO_COL \ + (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ +#define GM_TXF_MUL_COL \ + (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ +#define GM_TXF_SNG_COL \ + (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ +#define GM_TXE_FIFO_UR \ + (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ + +/*----------------------------------------------------------------------------*/ +/* + * GMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (r/o) read only + */ + +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +#define GM_GPSR_SPEED (1<<15) /* Bit 15: Port Speed (1 = 100 Mbps) */ +#define GM_GPSR_DUPLEX (1<<14) /* Bit 14: Duplex Mode (1 = Full) */ +#define GM_GPSR_FC_TX_DIS (1<<13) /* Bit 13: Tx Flow-Control Mode Disabled */ +#define GM_GPSR_LINK_UP (1<<12) /* Bit 12: Link Up Status */ +#define GM_GPSR_PAUSE (1<<11) /* Bit 11: Pause State */ +#define GM_GPSR_TX_ACTIVE (1<<10) /* Bit 10: Tx in Progress */ +#define GM_GPSR_EXC_COL (1<<9) /* Bit 9: Excessive Collisions Occured */ +#define GM_GPSR_LAT_COL (1<<8) /* Bit 8: Late Collisions Occured */ + /* Bit 7..6: reserved */ +#define GM_GPSR_PHY_ST_CH (1<<5) /* Bit 5: PHY Status Change */ +#define GM_GPSR_GIG_SPEED (1<<4) /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ +#define GM_GPSR_PART_MODE (1<<3) /* Bit 3: Partition mode */ +#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow-Control Mode Disabled */ +#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */ + /* Bit 0: reserved */ + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ + /* Bit 15: reserved */ +#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */ +#define GM_GPCR_FC_TX_DIS (1<<13) /* Bit 13: Disable Tx Flow-Control Mode */ +#define GM_GPCR_TX_ENA (1<<12) /* Bit 12: Enable Transmit */ +#define GM_GPCR_RX_ENA (1<<11) /* Bit 11: Enable Receive */ +#define GM_GPCR_BURST_ENA (1<<10) /* Bit 10: Enable Burst Mode */ +#define GM_GPCR_LOOP_ENA (1<<9) /* Bit 9: Enable MAC Loopback Mode */ +#define GM_GPCR_PART_ENA (1<<8) /* Bit 8: Enable Partition Mode */ +#define GM_GPCR_GIGS_ENA (1<<7) /* Bit 7: Gigabit Speed (1000 Mbps) */ +#define GM_GPCR_FL_PASS (1<<6) /* Bit 6: Force Link Pass */ +#define GM_GPCR_DUP_FULL (1<<5) /* Bit 5: Full Duplex Mode */ +#define GM_GPCR_FC_RX_DIS (1<<4) /* Bit 4: Disable Rx Flow-Control Mode */ +#define GM_GPCR_SPEED_100 (1<<3) /* Bit 3: Port Speed 100 Mbps */ +#define GM_GPCR_AU_DUP_DIS (1<<2) /* Bit 2: Disable Auto-Update Duplex */ +#define GM_GPCR_AU_FCT_DIS (1<<1) /* Bit 1: Disable Auto-Update Flow-C. */ +#define GM_GPCR_AU_SPD_DIS (1<<0) /* Bit 0: Disable Auto-Update Speed */ + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ + GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ +#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ +#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ +#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */ + +#define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) + +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */ +#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */ +#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */ +#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */ + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */ +#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */ +#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8..4: IPG Jam to Data */ + /* Bit 3..0: reserved */ + +#define TX_JAM_LEN_VAL(x) (SHIFT14(x) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (SHIFT9(x) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (SHIFT4(x) & GM_TXPA_JAMDAT_MSK) + +#define TX_JAM_LEN_DEF 0x03 +#define TX_JAM_IPG_DEF 0x0b +#define TX_IPG_JAM_DEF 0x1c + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder (r/o) */ +#define GM_SMOD_LIMIT_4 (1<<10) /* Bit 10: 4 consecutive Tx trials */ +#define GM_SMOD_VLAN_ENA (1<<9) /* Bit 9: Enable VLAN (Max. Frame Len) */ +#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Len) */ + /* Bit 7..5: reserved */ +#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ + +#define DATA_BLIND_VAL(x) (SHIFT11(x) & GM_SMOD_DATABL_MSK) +#define DATA_BLIND_DEF 0x04 + +#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */ +#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */ +#define GM_SMI_CT_OP_RD (1<<5) /* Bit 5: OpCode Read (0=Write)*/ +#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */ +#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */ + /* Bit 2..0: reserved */ + +#define GM_SMI_CT_PHY_AD(x) (SHIFT11(x) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (SHIFT6(x) & GM_SMI_CT_REG_A_MSK) + + /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ + /* Bit 15..6: reserved */ +#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */ +#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */ + /* Bit 3..0: reserved */ + +/* Receive Frame Status Encoding */ +#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */ + /* Bit 15..14: reserved */ +#define GMR_FS_VLAN (1L<<13) /* Bit 13: VLAN Packet */ +#define GMR_FS_JABBER (1L<<12) /* Bit 12: Jabber Packet */ +#define GMR_FS_UN_SIZE (1L<<11) /* Bit 11: Undersize Packet */ +#define GMR_FS_MC (1L<<10) /* Bit 10: Multicast Packet */ +#define GMR_FS_BC (1L<<9) /* Bit 9: Broadcast Packet */ +#define GMR_FS_RX_OK (1L<<8) /* Bit 8: Receive OK (Good Packet) */ +#define GMR_FS_GOOD_FC (1L<<7) /* Bit 7: Good Flow-Control Packet */ +#define GMR_FS_BAD_FC (1L<<6) /* Bit 6: Bad Flow-Control Packet */ +#define GMR_FS_MII_ERR (1L<<5) /* Bit 5: MII Error */ +#define GMR_FS_LONG_ERR (1L<<4) /* Bit 4: Too Long Packet */ +#define GMR_FS_FRAGMENT (1L<<3) /* Bit 3: Fragment */ + /* Bit 2: reserved */ +#define GMR_FS_CRC_ERR (1L<<1) /* Bit 1: CRC Error */ +#define GMR_FS_RX_FF_OV (1L<<0) /* Bit 0: Rx FIFO Overflow */ + +/* + * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) + */ +#define GMR_FS_ANY_ERR (GMR_FS_CRC_ERR | \ + GMR_FS_LONG_ERR | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_JABBER) + +/* Rx GMAC FIFO Flush Mask (default) */ +#define RX_FF_FL_DEF_MSK (GMR_FS_CRC_ERR | \ + GMR_FS_RX_FF_OV | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_UN_SIZE | \ + GMR_FS_JABBER) + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_XMAC_H */ diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c new file mode 100644 index 00000000000..6e6c56aa6d6 --- /dev/null +++ b/drivers/net/sk98lin/skaddr.c @@ -0,0 +1,1788 @@ +/****************************************************************************** + * + * Name: skaddr.c + * Project: Gigabit Ethernet Adapters, ADDR-Module + * Version: $Revision: 1.52 $ + * Date: $Date: 2003/06/02 13:46:15 $ + * Purpose: Manage Addresses (Multicast and Unicast) and Promiscuous Mode. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage multicast addresses, address override, + * and promiscuous mode on GEnesis and Yukon adapters. + * + * Address Layout: + * port address: physical MAC address + * 1st exact match: logical MAC address (GEnesis only) + * 2nd exact match: RLMT multicast (GEnesis only) + * exact match 3-13: OS-specific multicasts (GEnesis only) + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * "skdrv2nd.h" + * + ******************************************************************************/ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell."; +#endif /* DEBUG ||!LINT || !SK_SLIM */ + +#define __SKADDR_C + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* defines ********************************************************************/ + + +#define XMAC_POLY 0xEDB88320UL /* CRC32-Poly - XMAC: Little Endian */ +#define GMAC_POLY 0x04C11DB7L /* CRC16-Poly - GMAC: Little Endian */ +#define HASH_BITS 6 /* #bits in hash */ +#define SK_MC_BIT 0x01 + +/* Error numbers and messages. */ + +#define SKERR_ADDR_E001 (SK_ERRBASE_ADDR + 0) +#define SKERR_ADDR_E001MSG "Bad Flags." +#define SKERR_ADDR_E002 (SKERR_ADDR_E001 + 1) +#define SKERR_ADDR_E002MSG "New Error." + +/* typedefs *******************************************************************/ + +/* None. */ + +/* global variables ***********************************************************/ + +/* 64-bit hash values with all bits set. */ + +static const SK_U16 OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF}; + +/* local variables ************************************************************/ + +#ifdef DEBUG +static int Next0[SK_MAX_MACS] = {0}; +#endif /* DEBUG */ + +static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + SK_MAC_ADDR *pMc, int Flags); +static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + int Flags); +static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber); +static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC, + SK_U32 PortNumber, int NewPromMode); +static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + SK_MAC_ADDR *pMc, int Flags); +static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + int Flags); +static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber); +static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC, + SK_U32 PortNumber, int NewPromMode); + +/* functions ******************************************************************/ + +/****************************************************************************** + * + * SkAddrInit - initialize data, set state to init + * + * Description: + * + * SK_INIT_DATA + * ============ + * + * This routine clears the multicast tables and resets promiscuous mode. + * Some entries are reserved for the "logical MAC address", the + * SK-RLMT multicast address, and the BPDU multicast address. + * + * + * SK_INIT_IO + * ========== + * + * All permanent MAC addresses are read from EPROM. + * If the current MAC addresses are not already set in software, + * they are set to the values of the permanent addresses. + * The current addresses are written to the corresponding MAC. + * + * + * SK_INIT_RUN + * =========== + * + * Nothing. + * + * Context: + * init, pageable + * + * Returns: + * SK_ADDR_SUCCESS + */ +int SkAddrInit( +SK_AC *pAC, /* the adapter context */ +SK_IOC IoC, /* I/O context */ +int Level) /* initialization level */ +{ + int j; + SK_U32 i; + SK_U8 *InAddr; + SK_U16 *OutAddr; + SK_ADDR_PORT *pAPort; + + switch (Level) { + case SK_INIT_DATA: + SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0, + (SK_U16) sizeof(SK_ADDR)); + + for (i = 0; i < SK_MAX_MACS; i++) { + pAPort = &pAC->Addr.Port[i]; + pAPort->PromMode = SK_PROM_MODE_NONE; + + pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; + pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; + pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; + pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; + } +#ifdef xDEBUG + for (i = 0; i < SK_MAX_MACS; i++) { + if (pAC->Addr.Port[i].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[i] |= 4; + } + } +#endif /* DEBUG */ + /* pAC->Addr.InitDone = SK_INIT_DATA; */ + break; + + case SK_INIT_IO: +#ifndef SK_NO_RLMT + for (i = 0; i < SK_MAX_NETS; i++) { + pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort; + } +#endif /* !SK_NO_RLMT */ +#ifdef xDEBUG + for (i = 0; i < SK_MAX_MACS; i++) { + if (pAC->Addr.Port[i].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[i] |= 8; + } + } +#endif /* DEBUG */ + + /* Read permanent logical MAC address from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j]; + SK_IN8(IoC, B2_MAC_1 + j, InAddr); + } + + if (!pAC->Addr.Net[0].CurrentMacAddressSet) { + /* Set the current logical MAC address to the permanent one. */ + pAC->Addr.Net[0].CurrentMacAddress = + pAC->Addr.Net[0].PermanentMacAddress; + pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE; + } + + /* Set the current logical MAC address. */ + pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] = + pAC->Addr.Net[0].CurrentMacAddress; +#if SK_MAX_NETS > 1 + /* Set logical MAC address for net 2 to (log | 3). */ + if (!pAC->Addr.Net[1].CurrentMacAddressSet) { + pAC->Addr.Net[1].PermanentMacAddress = + pAC->Addr.Net[0].PermanentMacAddress; + pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3; + /* Set the current logical MAC address to the permanent one. */ + pAC->Addr.Net[1].CurrentMacAddress = + pAC->Addr.Net[1].PermanentMacAddress; + pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE; + } +#endif /* SK_MAX_NETS > 1 */ + +#ifdef DEBUG + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", + i, + pAC->Addr.Net[i].PermanentMacAddress.a[0], + pAC->Addr.Net[i].PermanentMacAddress.a[1], + pAC->Addr.Net[i].PermanentMacAddress.a[2], + pAC->Addr.Net[i].PermanentMacAddress.a[3], + pAC->Addr.Net[i].PermanentMacAddress.a[4], + pAC->Addr.Net[i].PermanentMacAddress.a[5])) + + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", + i, + pAC->Addr.Net[i].CurrentMacAddress.a[0], + pAC->Addr.Net[i].CurrentMacAddress.a[1], + pAC->Addr.Net[i].CurrentMacAddress.a[2], + pAC->Addr.Net[i].CurrentMacAddress.a[3], + pAC->Addr.Net[i].CurrentMacAddress.a[4], + pAC->Addr.Net[i].CurrentMacAddress.a[5])) + } +#endif /* DEBUG */ + + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + pAPort = &pAC->Addr.Port[i]; + + /* Read permanent port addresses from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j]; + SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr); + } + + if (!pAPort->CurrentMacAddressSet) { + /* + * Set the current and previous physical MAC address + * of this port to its permanent MAC address. + */ + pAPort->CurrentMacAddress = pAPort->PermanentMacAddress; + pAPort->PreviousMacAddress = pAPort->PermanentMacAddress; + pAPort->CurrentMacAddressSet = SK_TRUE; + } + + /* Set port's current physical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + XM_OUTADDR(IoC, i, XM_SA, OutAddr); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr); + } +#endif /* YUKON */ +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->PermanentMacAddress.a[0], + pAPort->PermanentMacAddress.a[1], + pAPort->PermanentMacAddress.a[2], + pAPort->PermanentMacAddress.a[3], + pAPort->PermanentMacAddress.a[4], + pAPort->PermanentMacAddress.a[5])) + + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->CurrentMacAddress.a[0], + pAPort->CurrentMacAddress.a[1], + pAPort->CurrentMacAddress.a[2], + pAPort->CurrentMacAddress.a[3], + pAPort->CurrentMacAddress.a[4], + pAPort->CurrentMacAddress.a[5])) +#endif /* DEBUG */ + } + /* pAC->Addr.InitDone = SK_INIT_IO; */ + break; + + case SK_INIT_RUN: +#ifdef xDEBUG + for (i = 0; i < SK_MAX_MACS; i++) { + if (pAC->Addr.Port[i].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[i] |= 16; + } + } +#endif /* DEBUG */ + + /* pAC->Addr.InitDone = SK_INIT_RUN; */ + break; + + default: /* error */ + break; + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrInit */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrMcClear - clear the multicast table + * + * Description: + * This routine clears the multicast table. + * + * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated + * immediately. + * + * It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according + * to the adapter in use. The real work is done there. + * + * Context: + * runtime, pageable + * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY + * may be called after SK_INIT_IO without limitation + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrMcClear( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Index of affected port */ +int Flags) /* permanent/non-perm, sw-only */ +{ + int ReturnCode; + + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (pAC->GIni.GIGenesis) { + ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags); + } + else { + ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags); + } + + return (ReturnCode); + +} /* SkAddrMcClear */ + +#endif /* !SK_SLIM */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrXmacMcClear - clear the multicast table + * + * Description: + * This routine clears the multicast table + * (either entry 2 or entries 3-16 and InexactFilter) of the given port. + * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated + * immediately. + * + * Context: + * runtime, pageable + * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY + * may be called after SK_INIT_IO without limitation + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrXmacMcClear( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Index of affected port */ +int Flags) /* permanent/non-perm, sw-only */ +{ + int i; + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ + + /* Clear RLMT multicast addresses. */ + pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; + } + else { /* not permanent => DRV */ + + /* Clear InexactFilter */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; + } + + /* Clear DRV multicast addresses. */ + + pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; + } + + if (!(Flags & SK_MC_SW_ONLY)) { + (void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrXmacMcClear */ + +#endif /* !SK_SLIM */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrGmacMcClear - clear the multicast table + * + * Description: + * This routine clears the multicast hashing table (InexactFilter) + * (either the RLMT or the driver bits) of the given port. + * + * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated + * immediately. + * + * Context: + * runtime, pageable + * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY + * may be called after SK_INIT_IO without limitation + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrGmacMcClear( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Index of affected port */ +int Flags) /* permanent/non-perm, sw-only */ +{ + int i; + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) +#endif /* DEBUG */ + + /* Clear InexactFilter */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; + } + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ + + /* Copy DRV bits to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; + + /* Clear InexactRlmtFilter. */ + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0; + + } + } + else { /* not permanent => DRV */ + + /* Copy RLMT bits to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; + + /* Clear InexactDrvFilter. */ + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0; + } + } + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) +#endif /* DEBUG */ + + if (!(Flags & SK_MC_SW_ONLY)) { + (void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrGmacMcClear */ + +#ifndef SK_ADDR_CHEAT + +/****************************************************************************** + * + * SkXmacMcHash - hash multicast address + * + * Description: + * This routine computes the hash value for a multicast address. + * A CRC32 algorithm is used. + * + * Notes: + * The code was adapted from the XaQti data sheet. + * + * Context: + * runtime, pageable + * + * Returns: + * Hash value of multicast address. + */ +static SK_U32 SkXmacMcHash( +unsigned char *pMc) /* Multicast address */ +{ + SK_U32 Idx; + SK_U32 Bit; + SK_U32 Data; + SK_U32 Crc; + + Crc = 0xFFFFFFFFUL; + for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) { + Data = *pMc++; + for (Bit = 0; Bit < 8; Bit++, Data >>= 1) { + Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0); + } + } + + return (Crc & ((1 << HASH_BITS) - 1)); + +} /* SkXmacMcHash */ + + +/****************************************************************************** + * + * SkGmacMcHash - hash multicast address + * + * Description: + * This routine computes the hash value for a multicast address. + * A CRC16 algorithm is used. + * + * Notes: + * + * + * Context: + * runtime, pageable + * + * Returns: + * Hash value of multicast address. + */ +static SK_U32 SkGmacMcHash( +unsigned char *pMc) /* Multicast address */ +{ + SK_U32 Data; + SK_U32 TmpData; + SK_U32 Crc; + int Byte; + int Bit; + + Crc = 0xFFFFFFFFUL; + for (Byte = 0; Byte < 6; Byte++) { + /* Get next byte. */ + Data = (SK_U32) pMc[Byte]; + + /* Change bit order in byte. */ + TmpData = Data; + for (Bit = 0; Bit < 8; Bit++) { + if (TmpData & 1L) { + Data |= 1L << (7 - Bit); + } + else { + Data &= ~(1L << (7 - Bit)); + } + TmpData >>= 1; + } + + Crc ^= (Data << 24); + for (Bit = 0; Bit < 8; Bit++) { + if (Crc & 0x80000000) { + Crc = (Crc << 1) ^ GMAC_POLY; + } + else { + Crc <<= 1; + } + } + } + + return (Crc & ((1 << HASH_BITS) - 1)); + +} /* SkGmacMcHash */ + +#endif /* !SK_ADDR_CHEAT */ + +/****************************************************************************** + * + * SkAddrMcAdd - add a multicast address to a port + * + * Description: + * This routine enables reception for a given address on the given port. + * + * It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the + * adapter in use. The real work is done there. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_DATA + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_MC_ILLEGAL_ADDRESS + * SK_MC_ILLEGAL_PORT + * SK_MC_RLMT_OVERFLOW + */ +int SkAddrMcAdd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR *pMc, /* multicast address to be added */ +int Flags) /* permanent/non-permanent */ +{ + int ReturnCode; + + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (pAC->GIni.GIGenesis) { + ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); + } + else { + ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); + } + + return (ReturnCode); + +} /* SkAddrMcAdd */ + + +/****************************************************************************** + * + * SkAddrXmacMcAdd - add a multicast address to a port + * + * Description: + * This routine enables reception for a given address on the given port. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * The multicast bit is only checked if there are no free exact match + * entries. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_DATA + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_MC_ILLEGAL_ADDRESS + * SK_MC_RLMT_OVERFLOW + */ +static int SkAddrXmacMcAdd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR *pMc, /* multicast address to be added */ +int Flags) /* permanent/non-permanent */ +{ + int i; + SK_U8 Inexact; +#ifndef SK_ADDR_CHEAT + SK_U32 HashBit; +#endif /* !defined(SK_ADDR_CHEAT) */ + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ +#ifdef xDEBUG + if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[PortNumber] |= 1; + return (SK_MC_RLMT_OVERFLOW); + } +#endif /* DEBUG */ + + if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt > + SK_ADDR_LAST_MATCH_RLMT) { + return (SK_MC_RLMT_OVERFLOW); + } + + /* Set a RLMT multicast address. */ + + pAC->Addr.Port[PortNumber].Exact[ + pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc; + + return (SK_MC_FILTERING_EXACT); + } + +#ifdef xDEBUG + if (pAC->Addr.Port[PortNumber].NextExactMatchDrv < + SK_ADDR_FIRST_MATCH_DRV) { + Next0[PortNumber] |= 2; + return (SK_MC_RLMT_OVERFLOW); + } +#endif /* DEBUG */ + + if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { + + /* Set exact match entry. */ + pAC->Addr.Port[PortNumber].Exact[ + pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc; + + /* Clear InexactFilter */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; + } + } + else { + if (!(pMc->a[0] & SK_MC_BIT)) { + /* Hashing only possible with multicast addresses */ + return (SK_MC_ILLEGAL_ADDRESS); + } +#ifndef SK_ADDR_CHEAT + /* Compute hash value of address. */ + HashBit = 63 - SkXmacMcHash(&pMc->a[0]); + + /* Add bit to InexactFilter. */ + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |= + 1 << (HashBit % 8); +#else /* SK_ADDR_CHEAT */ + /* Set all bits in InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; + } +#endif /* SK_ADDR_CHEAT */ + } + + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; + } + + if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) { + return (SK_MC_FILTERING_EXACT); + } + else { + return (SK_MC_FILTERING_INEXACT); + } + +} /* SkAddrXmacMcAdd */ + + +/****************************************************************************** + * + * SkAddrGmacMcAdd - add a multicast address to a port + * + * Description: + * This routine enables reception for a given address on the given port. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_DATA + * + * Returns: + * SK_MC_FILTERING_INEXACT + * SK_MC_ILLEGAL_ADDRESS + */ +static int SkAddrGmacMcAdd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR *pMc, /* multicast address to be added */ +int Flags) /* permanent/non-permanent */ +{ + int i; +#ifndef SK_ADDR_CHEAT + SK_U32 HashBit; +#endif /* !defined(SK_ADDR_CHEAT) */ + + if (!(pMc->a[0] & SK_MC_BIT)) { + /* Hashing only possible with multicast addresses */ + return (SK_MC_ILLEGAL_ADDRESS); + } + +#ifndef SK_ADDR_CHEAT + + /* Compute hash value of address. */ + HashBit = SkGmacMcHash(&pMc->a[0]); + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ + + /* Add bit to InexactRlmtFilter. */ + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |= + 1 << (HashBit % 8); + + /* Copy bit to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; + } +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7])) +#endif /* DEBUG */ + } + else { /* not permanent => DRV */ + + /* Add bit to InexactDrvFilter. */ + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |= + 1 << (HashBit % 8); + + /* Copy bit to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; + } +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7])) +#endif /* DEBUG */ + } + +#else /* SK_ADDR_CHEAT */ + + /* Set all bits in InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; + } +#endif /* SK_ADDR_CHEAT */ + + return (SK_MC_FILTERING_INEXACT); + +} /* SkAddrGmacMcAdd */ + +#endif /* !SK_SLIM */ + +/****************************************************************************** + * + * SkAddrMcUpdate - update the HW MC address table and set the MAC address + * + * Description: + * This routine enables reception of the addresses contained in a local + * table for a given port. + * It also programs the port's current physical MAC address. + * + * It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according + * to the adapter in use. The real work is done there. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrMcUpdate( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber) /* Port Number */ +{ + int ReturnCode = 0; +#if (!defined(SK_SLIM) || defined(DEBUG)) + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } +#endif /* !SK_SLIM || DEBUG */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber); + } +#endif /* YUKON */ + return (ReturnCode); + +} /* SkAddrMcUpdate */ + + +#ifdef GENESIS + +/****************************************************************************** + * + * SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address + * + * Description: + * This routine enables reception of the addresses contained in a local + * table for a given port. + * It also programs the port's current physical MAC address. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrXmacMcUpdate( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber) /* Port Number */ +{ + SK_U32 i; + SK_U8 Inexact; + SK_U16 *OutAddr; + SK_ADDR_PORT *pAPort; + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrXmacMcUpdate on Port %u.\n", PortNumber)) + + pAPort = &pAC->Addr.Port[PortNumber]; + +#ifdef DEBUG + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) +#endif /* DEBUG */ + + /* Start with 0 to also program the logical MAC address. */ + for (i = 0; i < pAPort->NextExactMatchRlmt; i++) { + /* Set exact match address i on XMAC */ + OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0]; + XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr); + } + + /* Clear other permanent exact match addresses on XMAC */ + if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) { + + SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt, + SK_ADDR_LAST_MATCH_RLMT); + } + + for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) { + OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0]; + XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr); + } + + /* Clear other non-permanent exact match addresses on XMAC */ + if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { + + SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv, + SK_ADDR_LAST_MATCH_DRV); + } + + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAPort->InexactFilter.Bytes[i]; + } + + if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { + + /* Set all bits in 64-bit hash register. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if (Inexact != 0) { + + /* Set 64-bit hash register to InexactFilter. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else { + /* Disable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE); + } + + if (pAPort->PromMode != SK_PROM_MODE_NONE) { + (void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); + } + + /* Set port's current physical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; + + XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); + +#ifdef xDEBUG + for (i = 0; i < pAPort->NextExactMatchRlmt; i++) { + SK_U8 InAddr8[6]; + SK_U16 *InAddr; + + /* Get exact match address i from port PortNumber. */ + InAddr = (SK_U16 *) &InAddr8[0]; + + XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr); + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrXmacMcUpdate: MC address %d on Port %u: ", + "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n", + i, + PortNumber, + InAddr8[0], + InAddr8[1], + InAddr8[2], + InAddr8[3], + InAddr8[4], + InAddr8[5], + pAPort->Exact[i].a[0], + pAPort->Exact[i].a[1], + pAPort->Exact[i].a[2], + pAPort->Exact[i].a[3], + pAPort->Exact[i].a[4], + pAPort->Exact[i].a[5])) + } +#endif /* DEBUG */ + + /* Determine return value. */ + if (Inexact == 0 && pAPort->PromMode == 0) { + return (SK_MC_FILTERING_EXACT); + } + else { + return (SK_MC_FILTERING_INEXACT); + } + +} /* SkAddrXmacMcUpdate */ + +#endif /* GENESIS */ + +#ifdef YUKON + +/****************************************************************************** + * + * SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address + * + * Description: + * This routine enables reception of the addresses contained in a local + * table for a given port. + * It also programs the port's current physical MAC address. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrGmacMcUpdate( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber) /* Port Number */ +{ +#ifndef SK_SLIM + SK_U32 i; + SK_U8 Inexact; +#endif /* not SK_SLIM */ + SK_U16 *OutAddr; + SK_ADDR_PORT *pAPort; + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrGmacMcUpdate on Port %u.\n", PortNumber)) + + pAPort = &pAC->Addr.Port[PortNumber]; + +#ifdef DEBUG + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) +#endif /* DEBUG */ + +#ifndef SK_SLIM + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAPort->InexactFilter.Bytes[i]; + } + + /* Set 64-bit hash register to InexactFilter. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, + &pAPort->InexactFilter.Bytes[0]); + + if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { + + /* Set all bits in 64-bit hash register. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else { + /* Enable Hashing. */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + + if (pAPort->PromMode != SK_PROM_MODE_NONE) { + (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); + } +#else /* SK_SLIM */ + + /* Set all bits in 64-bit hash register. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + + (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); + +#endif /* SK_SLIM */ + + /* Set port's current physical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; + GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); + + /* Set port's current logical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0]; + GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr); + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->Exact[0].a[0], + pAPort->Exact[0].a[1], + pAPort->Exact[0].a[2], + pAPort->Exact[0].a[3], + pAPort->Exact[0].a[4], + pAPort->Exact[0].a[5])) + + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->CurrentMacAddress.a[0], + pAPort->CurrentMacAddress.a[1], + pAPort->CurrentMacAddress.a[2], + pAPort->CurrentMacAddress.a[3], + pAPort->CurrentMacAddress.a[4], + pAPort->CurrentMacAddress.a[5])) +#endif /* DEBUG */ + +#ifndef SK_SLIM + /* Determine return value. */ + if (Inexact == 0 && pAPort->PromMode == 0) { + return (SK_MC_FILTERING_EXACT); + } + else { + return (SK_MC_FILTERING_INEXACT); + } +#else /* SK_SLIM */ + return (SK_MC_FILTERING_INEXACT); +#endif /* SK_SLIM */ + +} /* SkAddrGmacMcUpdate */ + +#endif /* YUKON */ + +#ifndef SK_NO_MAO + +/****************************************************************************** + * + * SkAddrOverride - override a port's MAC address + * + * Description: + * This routine overrides the MAC address of one port. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS if successful. + * SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address. + * SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address. + * SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before. + */ +int SkAddrOverride( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR SK_FAR *pNewAddr, /* new MAC address */ +int Flags) /* logical/physical MAC address */ +{ +#ifndef SK_NO_RLMT + SK_EVPARA Para; +#endif /* !SK_NO_RLMT */ + SK_U32 NetNumber; + SK_U32 i; + SK_U16 SK_FAR *OutAddr; + +#ifndef SK_NO_RLMT + NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber; +#else + NetNumber = 0; +#endif /* SK_NO_RLMT */ +#if (!defined(SK_SLIM) || defined(DEBUG)) + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } +#endif /* !SK_SLIM || DEBUG */ + if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) { + return (SK_ADDR_MULTICAST_ADDRESS); + } + + if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + + if (Flags & SK_ADDR_SET_LOGICAL) { /* Activate logical MAC address. */ + /* Parameter *pNewAddr is ignored. */ + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + } +#ifndef SK_NO_RLMT + /* Set PortNumber to number of net's active port. */ + PortNumber = pAC->Rlmt.Net[NetNumber]. + Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; +#endif /* !SK_NO_RLMT */ + pAC->Addr.Port[PortNumber].Exact[0] = + pAC->Addr.Net[NetNumber].CurrentMacAddress; + + /* Write address to first exact match entry of active port. */ + (void) SkAddrMcUpdate(pAC, IoC, PortNumber); + } + else if (Flags & SK_ADDR_CLEAR_LOGICAL) { + /* Deactivate logical MAC address. */ + /* Parameter *pNewAddr is ignored. */ + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + } +#ifndef SK_NO_RLMT + /* Set PortNumber to number of net's active port. */ + PortNumber = pAC->Rlmt.Net[NetNumber]. + Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; +#endif /* !SK_NO_RLMT */ + for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) { + pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0; + } + + /* Write address to first exact match entry of active port. */ + (void) SkAddrMcUpdate(pAC, IoC, PortNumber); + } + else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) { /* Physical MAC address. */ + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { + return (SK_ADDR_DUPLICATE_ADDRESS); + } + + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Port[i].CurrentMacAddress.a)) { + if (i == PortNumber) { + return (SK_ADDR_SUCCESS); + } + else { + return (SK_ADDR_DUPLICATE_ADDRESS); + } + } + } + + pAC->Addr.Port[PortNumber].PreviousMacAddress = + pAC->Addr.Port[PortNumber].CurrentMacAddress; + pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; + + /* Change port's physical MAC address. */ + OutAddr = (SK_U16 SK_FAR *) pNewAddr; +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); + } +#endif /* YUKON */ + +#ifndef SK_NO_RLMT + /* Report address change to RLMT. */ + Para.Para32[0] = PortNumber; + Para.Para32[0] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); +#endif /* !SK_NO_RLMT */ + } + else { /* Logical MAC address. */ + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { + return (SK_ADDR_SUCCESS); + } + + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Port[i].CurrentMacAddress.a)) { + return (SK_ADDR_DUPLICATE_ADDRESS); + } + } + + /* + * In case that the physical and the logical MAC addresses are equal + * we must also change the physical MAC address here. + * In this case we have an adapter which initially was programmed with + * two identical MAC addresses. + */ + if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a, + pAC->Addr.Port[PortNumber].Exact[0].a)) { + + pAC->Addr.Port[PortNumber].PreviousMacAddress = + pAC->Addr.Port[PortNumber].CurrentMacAddress; + pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; + +#ifndef SK_NO_RLMT + /* Report address change to RLMT. */ + Para.Para32[0] = PortNumber; + Para.Para32[0] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); +#endif /* !SK_NO_RLMT */ + } + +#ifndef SK_NO_RLMT + /* Set PortNumber to number of net's active port. */ + PortNumber = pAC->Rlmt.Net[NetNumber]. + Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; +#endif /* !SK_NO_RLMT */ + pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr; + pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr; +#ifdef DEBUG + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5])) + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5])) +#endif /* DEBUG */ + + /* Write address to first exact match entry of active port. */ + (void) SkAddrMcUpdate(pAC, IoC, PortNumber); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrOverride */ + + +#endif /* SK_NO_MAO */ + +/****************************************************************************** + * + * SkAddrPromiscuousChange - set promiscuous mode for given port + * + * Description: + * This routine manages promiscuous mode: + * - none + * - all LLC frames + * - all MC frames + * + * It calls either SkAddrXmacPromiscuousChange or + * SkAddrGmacPromiscuousChange, according to the adapter in use. + * The real work is done there. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrPromiscuousChange( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* port whose promiscuous mode changes */ +int NewPromMode) /* new promiscuous mode */ +{ + int ReturnCode = 0; +#if (!defined(SK_SLIM) || defined(DEBUG)) + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } +#endif /* !SK_SLIM || DEBUG */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + ReturnCode = + SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + ReturnCode = + SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); + } +#endif /* YUKON */ + + return (ReturnCode); + +} /* SkAddrPromiscuousChange */ + +#ifdef GENESIS + +/****************************************************************************** + * + * SkAddrXmacPromiscuousChange - set promiscuous mode for given port + * + * Description: + * This routine manages promiscuous mode: + * - none + * - all LLC frames + * - all MC frames + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrXmacPromiscuousChange( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* port whose promiscuous mode changes */ +int NewPromMode) /* new promiscuous mode */ +{ + int i; + SK_BOOL InexactModeBit; + SK_U8 Inexact; + SK_U8 HwInexact; + SK_FILTER64 HwInexactFilter; + SK_U16 LoMode; /* Lower 16 bits of XMAC Mode Register. */ + int CurPromMode = SK_PROM_MODE_NONE; + + /* Read CurPromMode from Hardware. */ + XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); + + if ((LoMode & XM_MD_ENA_PROM) != 0) { + /* Promiscuous mode! */ + CurPromMode |= SK_PROM_MODE_LLC; + } + + for (Inexact = 0xFF, i = 0; i < 8; i++) { + Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; + } + if (Inexact == 0xFF) { + CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC); + } + else { + /* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */ + XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); + + InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0; + + /* Read 64-bit hash register from XMAC */ + XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]); + + for (HwInexact = 0xFF, i = 0; i < 8; i++) { + HwInexact &= HwInexactFilter.Bytes[i]; + } + + if (InexactModeBit && (HwInexact == 0xFF)) { + CurPromMode |= SK_PROM_MODE_ALL_MC; + } + } + + pAC->Addr.Port[PortNumber].PromMode = NewPromMode; + + if (NewPromMode == CurPromMode) { + return (SK_ADDR_SUCCESS); + } + + if ((NewPromMode & SK_PROM_MODE_ALL_MC) && + !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC. */ + + /* Set all bits in 64-bit hash register. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if ((CurPromMode & SK_PROM_MODE_ALL_MC) && + !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm MC. */ + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; + } + if (Inexact == 0) { + /* Disable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE); + } + else { + /* Set 64-bit hash register to InexactFilter. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, + &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + } + + if ((NewPromMode & SK_PROM_MODE_LLC) && + !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ + /* Set the MAC in Promiscuous Mode */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if ((CurPromMode & SK_PROM_MODE_LLC) && + !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC. */ + /* Clear Promiscuous Mode */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrXmacPromiscuousChange */ + +#endif /* GENESIS */ + +#ifdef YUKON + +/****************************************************************************** + * + * SkAddrGmacPromiscuousChange - set promiscuous mode for given port + * + * Description: + * This routine manages promiscuous mode: + * - none + * - all LLC frames + * - all MC frames + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrGmacPromiscuousChange( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* port whose promiscuous mode changes */ +int NewPromMode) /* new promiscuous mode */ +{ + SK_U16 ReceiveControl; /* GMAC Receive Control Register */ + int CurPromMode = SK_PROM_MODE_NONE; + + /* Read CurPromMode from Hardware. */ + GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl); + + if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) { + /* Promiscuous mode! */ + CurPromMode |= SK_PROM_MODE_LLC; + } + + if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) { + /* All Multicast mode! */ + CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC); + } + + pAC->Addr.Port[PortNumber].PromMode = NewPromMode; + + if (NewPromMode == CurPromMode) { + return (SK_ADDR_SUCCESS); + } + + if ((NewPromMode & SK_PROM_MODE_ALL_MC) && + !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC */ + + /* Set all bits in 64-bit hash register. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + + if ((CurPromMode & SK_PROM_MODE_ALL_MC) && + !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm. MC */ + + /* Set 64-bit hash register to InexactFilter. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, + &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]); + + /* Enable Hashing. */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + + if ((NewPromMode & SK_PROM_MODE_LLC) && + !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ + + /* Set the MAC to Promiscuous Mode. */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if ((CurPromMode & SK_PROM_MODE_LLC) && + !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC */ + + /* Clear Promiscuous Mode. */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrGmacPromiscuousChange */ + +#endif /* YUKON */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrSwap - swap address info + * + * Description: + * This routine swaps address info of two ports. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrSwap( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 FromPortNumber, /* Port1 Index */ +SK_U32 ToPortNumber) /* Port2 Index */ +{ + int i; + SK_U8 Byte; + SK_MAC_ADDR MacAddr; + SK_U32 DWord; + + if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) { + return (SK_ADDR_ILLEGAL_PORT); + } + + /* + * Swap: + * - Exact Match Entries (GEnesis and Yukon) + * Yukon uses first entry for the logical MAC + * address (stored in the second GMAC register). + * - FirstExactMatchRlmt (GEnesis only) + * - NextExactMatchRlmt (GEnesis only) + * - FirstExactMatchDrv (GEnesis only) + * - NextExactMatchDrv (GEnesis only) + * - 64-bit filter (InexactFilter) + * - Promiscuous Mode + * of ports. + */ + + for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) { + MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i]; + pAC->Addr.Port[FromPortNumber].Exact[i] = + pAC->Addr.Port[ToPortNumber].Exact[i]; + pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr; + } + + for (i = 0; i < 8; i++) { + Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i]; + pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] = + pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i]; + pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte; + } + + i = pAC->Addr.Port[FromPortNumber].PromMode; + pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode; + pAC->Addr.Port[ToPortNumber].PromMode = i; + + if (pAC->GIni.GIGenesis) { + DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt; + pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt = + pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt; + pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord; + + DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt; + pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt = + pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt; + pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord; + + DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv; + pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv = + pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv; + pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord; + + DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv; + pAC->Addr.Port[FromPortNumber].NextExactMatchDrv = + pAC->Addr.Port[ToPortNumber].NextExactMatchDrv; + pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord; + } + + /* CAUTION: Solution works if only ports of one adapter are in use. */ + for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber]. + Net->NetNumber].NumPorts; i++) { + if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber]. + Port[i]->PortNumber == ToPortNumber) { + pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber]. + ActivePort = i; + /* 20001207 RA: Was "ToPortNumber;". */ + } + } + + (void) SkAddrMcUpdate(pAC, IoC, FromPortNumber); + (void) SkAddrMcUpdate(pAC, IoC, ToPortNumber); + + return (SK_ADDR_SUCCESS); + +} /* SkAddrSwap */ + +#endif /* !SK_SLIM */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c new file mode 100644 index 00000000000..37ce03fb8de --- /dev/null +++ b/drivers/net/sk98lin/skdim.c @@ -0,0 +1,742 @@ +/****************************************************************************** + * + * Name: skdim.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.5 $ + * Date: $Date: 2003/11/28 12:55:40 $ + * Purpose: All functions to maintain interrupt moderation + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage the dynamic interrupt moderation on both + * GEnesis and Yukon adapters. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef lint +static const char SysKonnectFileId[] = + "@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect."; +#endif + +#define __SKADDR_C + +#ifdef __cplusplus +#error C++ is not yet supported. +extern "C" { +#endif + +/******************************************************************************* +** +** Includes +** +*******************************************************************************/ + +#ifndef __INC_SKDRV1ST_H +#include "h/skdrv1st.h" +#endif + +#ifndef __INC_SKDRV2ND_H +#include "h/skdrv2nd.h" +#endif + +#include <linux/kernel_stat.h> + +/******************************************************************************* +** +** Defines +** +*******************************************************************************/ + +/******************************************************************************* +** +** Typedefs +** +*******************************************************************************/ + +/******************************************************************************* +** +** Local function prototypes +** +*******************************************************************************/ + +static unsigned int GetCurrentSystemLoad(SK_AC *pAC); +static SK_U64 GetIsrCalls(SK_AC *pAC); +static SK_BOOL IsIntModEnabled(SK_AC *pAC); +static void SetCurrIntCtr(SK_AC *pAC); +static void EnableIntMod(SK_AC *pAC); +static void DisableIntMod(SK_AC *pAC); +static void ResizeDimTimerDuration(SK_AC *pAC); +static void DisplaySelectedModerationType(SK_AC *pAC); +static void DisplaySelectedModerationMask(SK_AC *pAC); +static void DisplayDescrRatio(SK_AC *pAC); + +/******************************************************************************* +** +** Global variables +** +*******************************************************************************/ + +/******************************************************************************* +** +** Local variables +** +*******************************************************************************/ + +/******************************************************************************* +** +** Global functions +** +*******************************************************************************/ + +/******************************************************************************* +** Function : SkDimModerate +** Description : Called in every ISR to check if moderation is to be applied +** or not for the current number of interrupts +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +void +SkDimModerate(SK_AC *pAC) { + unsigned int CurrSysLoad = 0; /* expressed in percent */ + unsigned int LoadIncrease = 0; /* expressed in percent */ + SK_U64 ThresholdInts = 0; + SK_U64 IsrCallsPerSec = 0; + +#define M_DIMINFO pAC->DynIrqModInfo + + if (!IsIntModEnabled(pAC)) { + if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + CurrSysLoad = GetCurrentSystemLoad(pAC); + if (CurrSysLoad > 75) { + /* + ** More than 75% total system load! Enable the moderation + ** to shield the system against too many interrupts. + */ + EnableIntMod(pAC); + } else if (CurrSysLoad > M_DIMINFO.PrevSysLoad) { + LoadIncrease = (CurrSysLoad - M_DIMINFO.PrevSysLoad); + if (LoadIncrease > ((M_DIMINFO.PrevSysLoad * + C_INT_MOD_ENABLE_PERCENTAGE) / 100)) { + if (CurrSysLoad > 10) { + /* + ** More than 50% increase with respect to the + ** previous load of the system. Most likely this + ** is due to our ISR-proc... + */ + EnableIntMod(pAC); + } + } + } else { + /* + ** Neither too much system load at all nor too much increase + ** with respect to the previous system load. Hence, we can leave + ** the ISR-handling like it is without enabling moderation. + */ + } + M_DIMINFO.PrevSysLoad = CurrSysLoad; + } + } else { + if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec * + C_INT_MOD_DISABLE_PERCENTAGE) / 100); + IsrCallsPerSec = GetIsrCalls(pAC); + if (IsrCallsPerSec <= ThresholdInts) { + /* + ** The number of interrupts within the last second is + ** lower than the disable_percentage of the desried + ** maxrate. Therefore we can disable the moderation. + */ + DisableIntMod(pAC); + M_DIMINFO.MaxModIntsPerSec = + (M_DIMINFO.MaxModIntsPerSecUpperLimit + + M_DIMINFO.MaxModIntsPerSecLowerLimit) / 2; + } else { + /* + ** The number of interrupts per sec is the same as expected. + ** Evalulate the descriptor-ratio. If it has changed, a resize + ** in the moderation timer might be useful + */ + if (M_DIMINFO.AutoSizing) { + ResizeDimTimerDuration(pAC); + } + } + } + } + + /* + ** Some information to the log... + */ + if (M_DIMINFO.DisplayStats) { + DisplaySelectedModerationType(pAC); + DisplaySelectedModerationMask(pAC); + DisplayDescrRatio(pAC); + } + + M_DIMINFO.NbrProcessedDescr = 0; + SetCurrIntCtr(pAC); +} + +/******************************************************************************* +** Function : SkDimStartModerationTimer +** Description : Starts the audit-timer for the dynamic interrupt moderation +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +void +SkDimStartModerationTimer(SK_AC *pAC) { + SK_EVPARA EventParam; /* Event struct for timer event */ + + SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = SK_DRV_MODERATION_TIMER; + SkTimerStart(pAC, pAC->IoBase, &pAC->DynIrqModInfo.ModTimer, + SK_DRV_MODERATION_TIMER_LENGTH, + SKGE_DRV, SK_DRV_TIMER, EventParam); +} + +/******************************************************************************* +** Function : SkDimEnableModerationIfNeeded +** Description : Either enables or disables moderation +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : This function is called when a particular adapter is opened +** There is no Disable function, because when all interrupts +** might be disable, the moderation timer has no meaning at all +******************************************************************************/ + +void +SkDimEnableModerationIfNeeded(SK_AC *pAC) { + + if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_STATIC) { + EnableIntMod(pAC); /* notification print in this function */ + } else if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + SkDimStartModerationTimer(pAC); + if (M_DIMINFO.DisplayStats) { + printk("Dynamic moderation has been enabled\n"); + } + } else { + if (M_DIMINFO.DisplayStats) { + printk("No moderation has been enabled\n"); + } + } +} + +/******************************************************************************* +** Function : SkDimDisplayModerationSettings +** Description : Displays the current settings regarding interrupt moderation +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +void +SkDimDisplayModerationSettings(SK_AC *pAC) { + DisplaySelectedModerationType(pAC); + DisplaySelectedModerationMask(pAC); +} + +/******************************************************************************* +** +** Local functions +** +*******************************************************************************/ + +/******************************************************************************* +** Function : GetCurrentSystemLoad +** Description : Retrieves the current system load of the system. This load +** is evaluated for all processors within the system. +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : unsigned int: load expressed in percentage +** Notes : The possible range being returned is from 0 up to 100. +** Whereas 0 means 'no load at all' and 100 'system fully loaded' +** It is impossible to determine what actually causes the system +** to be in 100%, but maybe that is due to too much interrupts. +*******************************************************************************/ + +static unsigned int +GetCurrentSystemLoad(SK_AC *pAC) { + unsigned long jif = jiffies; + unsigned int UserTime = 0; + unsigned int SystemTime = 0; + unsigned int NiceTime = 0; + unsigned int IdleTime = 0; + unsigned int TotalTime = 0; + unsigned int UsedTime = 0; + unsigned int SystemLoad = 0; + + /* unsigned int NbrCpu = 0; */ + + /* + ** The following lines have been commented out, because + ** from kernel 2.5.44 onwards, the kernel-owned structure + ** + ** struct kernel_stat kstat + ** + ** is not marked as an exported symbol in the file + ** + ** kernel/ksyms.c + ** + ** As a consequence, using this driver as KLM is not possible + ** and any access of the structure kernel_stat via the + ** dedicated macros kstat_cpu(i).cpustat.xxx is to be avoided. + ** + ** The kstat-information might be added again in future + ** versions of the 2.5.xx kernel, but for the time being, + ** number of interrupts will serve as indication how much + ** load we currently have... + ** + ** for (NbrCpu = 0; NbrCpu < num_online_cpus(); NbrCpu++) { + ** UserTime = UserTime + kstat_cpu(NbrCpu).cpustat.user; + ** NiceTime = NiceTime + kstat_cpu(NbrCpu).cpustat.nice; + ** SystemTime = SystemTime + kstat_cpu(NbrCpu).cpustat.system; + ** } + */ + SK_U64 ThresholdInts = 0; + SK_U64 IsrCallsPerSec = 0; + + ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec * + C_INT_MOD_ENABLE_PERCENTAGE) + 100); + IsrCallsPerSec = GetIsrCalls(pAC); + if (IsrCallsPerSec >= ThresholdInts) { + /* + ** We do not know how much the real CPU-load is! + ** Return 80% as a default in order to activate DIM + */ + SystemLoad = 80; + return (SystemLoad); + } + + UsedTime = UserTime + NiceTime + SystemTime; + + IdleTime = jif * num_online_cpus() - UsedTime; + TotalTime = UsedTime + IdleTime; + + SystemLoad = ( 100 * (UsedTime - M_DIMINFO.PrevUsedTime) ) / + (TotalTime - M_DIMINFO.PrevTotalTime); + + if (M_DIMINFO.DisplayStats) { + printk("Current system load is: %u\n", SystemLoad); + } + + M_DIMINFO.PrevTotalTime = TotalTime; + M_DIMINFO.PrevUsedTime = UsedTime; + + return (SystemLoad); +} + +/******************************************************************************* +** Function : GetIsrCalls +** Description : Depending on the selected moderation mask, this function will +** return the number of interrupts handled in the previous time- +** frame. This evaluated number is based on the current number +** of interrupts stored in PNMI-context and the previous stored +** interrupts. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : int: the number of interrupts being executed in the last +** timeframe +** Notes : It makes only sense to call this function, when dynamic +** interrupt moderation is applied +*******************************************************************************/ + +static SK_U64 +GetIsrCalls(SK_AC *pAC) { + SK_U64 RxPort0IntDiff = 0; + SK_U64 RxPort1IntDiff = 0; + SK_U64 TxPort0IntDiff = 0; + SK_U64 TxPort1IntDiff = 0; + + if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_TX_ONLY) { + if (pAC->GIni.GIMacsFound == 2) { + TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - + pAC->DynIrqModInfo.PrevPort1TxIntrCts; + } + TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - + pAC->DynIrqModInfo.PrevPort0TxIntrCts; + } else if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_RX_ONLY) { + if (pAC->GIni.GIMacsFound == 2) { + RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - + pAC->DynIrqModInfo.PrevPort1RxIntrCts; + } + RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - + pAC->DynIrqModInfo.PrevPort0RxIntrCts; + } else { + if (pAC->GIni.GIMacsFound == 2) { + RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - + pAC->DynIrqModInfo.PrevPort1RxIntrCts; + TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - + pAC->DynIrqModInfo.PrevPort1TxIntrCts; + } + RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - + pAC->DynIrqModInfo.PrevPort0RxIntrCts; + TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - + pAC->DynIrqModInfo.PrevPort0TxIntrCts; + } + + return (RxPort0IntDiff + RxPort1IntDiff + TxPort0IntDiff + TxPort1IntDiff); +} + +/******************************************************************************* +** Function : GetRxCalls +** Description : This function will return the number of times a receive inter- +** rupt was processed. This is needed to evaluate any resizing +** factor. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : SK_U64: the number of RX-ints being processed +** Notes : It makes only sense to call this function, when dynamic +** interrupt moderation is applied +*******************************************************************************/ + +static SK_U64 +GetRxCalls(SK_AC *pAC) { + SK_U64 RxPort0IntDiff = 0; + SK_U64 RxPort1IntDiff = 0; + + if (pAC->GIni.GIMacsFound == 2) { + RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - + pAC->DynIrqModInfo.PrevPort1RxIntrCts; + } + RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - + pAC->DynIrqModInfo.PrevPort0RxIntrCts; + + return (RxPort0IntDiff + RxPort1IntDiff); +} + +/******************************************************************************* +** Function : SetCurrIntCtr +** Description : Will store the current number orf occured interrupts in the +** adapter context. This is needed to evaluated the number of +** interrupts within a current timeframe. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +static void +SetCurrIntCtr(SK_AC *pAC) { + if (pAC->GIni.GIMacsFound == 2) { + pAC->DynIrqModInfo.PrevPort1RxIntrCts = pAC->Pnmi.Port[1].RxIntrCts; + pAC->DynIrqModInfo.PrevPort1TxIntrCts = pAC->Pnmi.Port[1].TxIntrCts; + } + pAC->DynIrqModInfo.PrevPort0RxIntrCts = pAC->Pnmi.Port[0].RxIntrCts; + pAC->DynIrqModInfo.PrevPort0TxIntrCts = pAC->Pnmi.Port[0].TxIntrCts; +} + +/******************************************************************************* +** Function : IsIntModEnabled() +** Description : Retrieves the current value of the interrupts moderation +** command register. Its content determines whether any +** moderation is running or not. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : SK_TRUE : if mod timer running +** SK_FALSE : if no moderation is being performed +** Notes : - +*******************************************************************************/ + +static SK_BOOL +IsIntModEnabled(SK_AC *pAC) { + unsigned long CtrCmd; + + SK_IN32(pAC->IoBase, B2_IRQM_CTRL, &CtrCmd); + if ((CtrCmd & TIM_START) == TIM_START) { + return SK_TRUE; + } else { + return SK_FALSE; + } +} + +/******************************************************************************* +** Function : EnableIntMod() +** Description : Enables the interrupt moderation using the values stored in +** in the pAC->DynIntMod data structure +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : - +** Notes : - +*******************************************************************************/ + +static void +EnableIntMod(SK_AC *pAC) { + unsigned long ModBase; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec; + } else { + ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec; + } + + SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase); + SK_OUT32(pAC->IoBase, B2_IRQM_MSK, pAC->DynIrqModInfo.MaskIrqModeration); + SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START); + if (M_DIMINFO.DisplayStats) { + printk("Enabled interrupt moderation (%i ints/sec)\n", + M_DIMINFO.MaxModIntsPerSec); + } +} + +/******************************************************************************* +** Function : DisableIntMod() +** Description : Disables the interrupt moderation independent of what inter- +** rupts are running or not +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : - +** Notes : - +*******************************************************************************/ + +static void +DisableIntMod(SK_AC *pAC) { + + SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_STOP); + if (M_DIMINFO.DisplayStats) { + printk("Disabled interrupt moderation\n"); + } +} + +/******************************************************************************* +** Function : ResizeDimTimerDuration(); +** Description : Checks the current used descriptor ratio and resizes the +** duration timer (longer/smaller) if possible. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : - +** Notes : There are both maximum and minimum timer duration value. +** This function assumes that interrupt moderation is already +** enabled! +*******************************************************************************/ + +static void +ResizeDimTimerDuration(SK_AC *pAC) { + SK_BOOL IncreaseTimerDuration; + int TotalMaxNbrDescr; + int UsedDescrRatio; + int RatioDiffAbs; + int RatioDiffRel; + int NewMaxModIntsPerSec; + int ModAdjValue; + long ModBase; + + /* + ** Check first if we are allowed to perform any modification + */ + if (IsIntModEnabled(pAC)) { + if (M_DIMINFO.IntModTypeSelect != C_INT_MOD_DYNAMIC) { + return; + } else { + if (M_DIMINFO.ModJustEnabled) { + M_DIMINFO.ModJustEnabled = SK_FALSE; + return; + } + } + } + + /* + ** If we got until here, we have to evaluate the amount of the + ** descriptor ratio change... + */ + TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC); + UsedDescrRatio = (M_DIMINFO.NbrProcessedDescr * 100) / TotalMaxNbrDescr; + + if (UsedDescrRatio > M_DIMINFO.PrevUsedDescrRatio) { + RatioDiffAbs = (UsedDescrRatio - M_DIMINFO.PrevUsedDescrRatio); + RatioDiffRel = (RatioDiffAbs * 100) / UsedDescrRatio; + M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; + IncreaseTimerDuration = SK_FALSE; /* in other words: DECREASE */ + } else if (UsedDescrRatio < M_DIMINFO.PrevUsedDescrRatio) { + RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio); + RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio; + M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; + IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */ + } else { + RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio); + RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio; + M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; + IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */ + } + + /* + ** Now we can determine the change in percent + */ + if ((RatioDiffRel >= 0) && (RatioDiffRel <= 5) ) { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } else if ((RatioDiffRel > 5) && (RatioDiffRel <= 10) ) { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } else if ((RatioDiffRel > 10) && (RatioDiffRel <= 15) ) { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } else { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } + + if (IncreaseTimerDuration) { + NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec + + (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100; + } else { + NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec - + (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100; + } + + /* + ** Check if we exceed boundaries... + */ + if ( (NewMaxModIntsPerSec > M_DIMINFO.MaxModIntsPerSecUpperLimit) || + (NewMaxModIntsPerSec < M_DIMINFO.MaxModIntsPerSecLowerLimit)) { + if (M_DIMINFO.DisplayStats) { + printk("Cannot change ModTim from %i to %i ints/sec\n", + M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec); + } + return; + } else { + if (M_DIMINFO.DisplayStats) { + printk("Resized ModTim from %i to %i ints/sec\n", + M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec); + } + } + + M_DIMINFO.MaxModIntsPerSec = NewMaxModIntsPerSec; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec; + } else { + ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec; + } + + /* + ** We do not need to touch any other registers + */ + SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase); +} + +/******************************************************************************* +** Function : DisplaySelectedModerationType() +** Description : Displays what type of moderation we have +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void! +** Notes : - +*******************************************************************************/ + +static void +DisplaySelectedModerationType(SK_AC *pAC) { + + if (pAC->DynIrqModInfo.DisplayStats) { + if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) { + printk("Static int moderation runs with %i INTS/sec\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + } else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + if (IsIntModEnabled(pAC)) { + printk("Dynamic int moderation runs with %i INTS/sec\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + } else { + printk("Dynamic int moderation currently not applied\n"); + } + } else { + printk("No interrupt moderation selected!\n"); + } + } +} + +/******************************************************************************* +** Function : DisplaySelectedModerationMask() +** Description : Displays what interrupts are moderated +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void! +** Notes : - +*******************************************************************************/ + +static void +DisplaySelectedModerationMask(SK_AC *pAC) { + + if (pAC->DynIrqModInfo.DisplayStats) { + if (pAC->DynIrqModInfo.IntModTypeSelect != C_INT_MOD_NONE) { + switch (pAC->DynIrqModInfo.MaskIrqModeration) { + case IRQ_MASK_TX_ONLY: + printk("Only Tx-interrupts are moderated\n"); + break; + case IRQ_MASK_RX_ONLY: + printk("Only Rx-interrupts are moderated\n"); + break; + case IRQ_MASK_SP_ONLY: + printk("Only special-interrupts are moderated\n"); + break; + case IRQ_MASK_TX_RX: + printk("Tx- and Rx-interrupts are moderated\n"); + break; + case IRQ_MASK_SP_RX: + printk("Special- and Rx-interrupts are moderated\n"); + break; + case IRQ_MASK_SP_TX: + printk("Special- and Tx-interrupts are moderated\n"); + break; + case IRQ_MASK_RX_TX_SP: + printk("All Rx-, Tx and special-interrupts are moderated\n"); + break; + default: + printk("Don't know what is moderated\n"); + break; + } + } else { + printk("No specific interrupts masked for moderation\n"); + } + } +} + +/******************************************************************************* +** Function : DisplayDescrRatio +** Description : Like the name states... +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void! +** Notes : - +*******************************************************************************/ + +static void +DisplayDescrRatio(SK_AC *pAC) { + int TotalMaxNbrDescr = 0; + + if (pAC->DynIrqModInfo.DisplayStats) { + TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC); + printk("Ratio descriptors: %i/%i\n", + M_DIMINFO.NbrProcessedDescr, TotalMaxNbrDescr); + } +} + +/******************************************************************************* +** +** End of file +** +*******************************************************************************/ diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c new file mode 100644 index 00000000000..5a6da8950fa --- /dev/null +++ b/drivers/net/sk98lin/skethtool.c @@ -0,0 +1,627 @@ +/****************************************************************************** + * + * Name: skethtool.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.7 $ + * Date: $Date: 2004/09/29 13:32:07 $ + * Purpose: All functions regarding ethtool handling + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2004 Marvell. + * + * Driver for Marvell Yukon/2 chipset and SysKonnect Gigabit Ethernet + * Server Adapters. + * + * Author: Ralph Roesler (rroesler@syskonnect.de) + * Mirko Lindner (mlindner@syskonnect.de) + * + * Address all question to: linux@syskonnect.de + * + * The technical manual for the adapters is available from SysKonnect's + * web pages: www.syskonnect.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + *****************************************************************************/ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" +#include "h/skversion.h" + +#include <linux/ethtool.h> +#include <linux/timer.h> +#include <linux/delay.h> + +/****************************************************************************** + * + * Defines + * + *****************************************************************************/ + +#define SUPP_COPPER_ALL (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ + SUPPORTED_1000baseT_Half| SUPPORTED_1000baseT_Full| \ + SUPPORTED_TP) + +#define ADV_COPPER_ALL (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half| ADVERTISED_1000baseT_Full| \ + ADVERTISED_TP) + +#define SUPP_FIBRE_ALL (SUPPORTED_1000baseT_Full | \ + SUPPORTED_FIBRE | \ + SUPPORTED_Autoneg) + +#define ADV_FIBRE_ALL (ADVERTISED_1000baseT_Full | \ + ADVERTISED_FIBRE | \ + ADVERTISED_Autoneg) + + +/****************************************************************************** + * + * Local Functions + * + *****************************************************************************/ + +/***************************************************************************** + * + * getSettings - retrieves the current settings of the selected adapter + * + * Description: + * The current configuration of the selected adapter is returned. + * This configuration involves a)speed, b)duplex and c)autoneg plus + * a number of other variables. + * + * Returns: always 0 + * + */ +static int getSettings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + const DEV_NET *pNet = netdev_priv(dev); + int port = pNet->PortNr; + const SK_AC *pAC = pNet->pAC; + const SK_GEPORT *pPort = &pAC->GIni.GP[port]; + + static int DuplexAutoNegConfMap[9][3]= { + { -1 , -1 , -1 }, + { 0 , -1 , -1 }, + { SK_LMODE_HALF , DUPLEX_HALF, AUTONEG_DISABLE }, + { SK_LMODE_FULL , DUPLEX_FULL, AUTONEG_DISABLE }, + { SK_LMODE_AUTOHALF , DUPLEX_HALF, AUTONEG_ENABLE }, + { SK_LMODE_AUTOFULL , DUPLEX_FULL, AUTONEG_ENABLE }, + { SK_LMODE_AUTOBOTH , DUPLEX_FULL, AUTONEG_ENABLE }, + { SK_LMODE_AUTOSENSE , -1 , -1 }, + { SK_LMODE_INDETERMINATED, -1 , -1 } + }; + static int SpeedConfMap[6][2] = { + { 0 , -1 }, + { SK_LSPEED_AUTO , -1 }, + { SK_LSPEED_10MBPS , SPEED_10 }, + { SK_LSPEED_100MBPS , SPEED_100 }, + { SK_LSPEED_1000MBPS , SPEED_1000 }, + { SK_LSPEED_INDETERMINATED, -1 } + }; + static int AdvSpeedMap[6][2] = { + { 0 , -1 }, + { SK_LSPEED_AUTO , -1 }, + { SK_LSPEED_10MBPS , ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full }, + { SK_LSPEED_100MBPS , ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full }, + { SK_LSPEED_1000MBPS , ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full}, + { SK_LSPEED_INDETERMINATED, -1 } + }; + + ecmd->phy_address = port; + ecmd->speed = SpeedConfMap[pPort->PLinkSpeedUsed][1]; + ecmd->duplex = DuplexAutoNegConfMap[pPort->PLinkModeStatus][1]; + ecmd->autoneg = DuplexAutoNegConfMap[pPort->PLinkModeStatus][2]; + ecmd->transceiver = XCVR_INTERNAL; + + if (pAC->GIni.GICopperType) { + ecmd->port = PORT_TP; + ecmd->supported = (SUPP_COPPER_ALL|SUPPORTED_Autoneg); + if (pAC->GIni.GIGenesis) { + ecmd->supported &= ~(SUPPORTED_10baseT_Half); + ecmd->supported &= ~(SUPPORTED_10baseT_Full); + ecmd->supported &= ~(SUPPORTED_100baseT_Half); + ecmd->supported &= ~(SUPPORTED_100baseT_Full); + } else { + if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { + ecmd->supported &= ~(SUPPORTED_1000baseT_Half); + } +#ifdef CHIP_ID_YUKON_FE + if (pAC->GIni.GIChipId == CHIP_ID_YUKON_FE) { + ecmd->supported &= ~(SUPPORTED_1000baseT_Half); + ecmd->supported &= ~(SUPPORTED_1000baseT_Full); + } +#endif + } + if (pAC->GIni.GP[0].PLinkSpeed != SK_LSPEED_AUTO) { + ecmd->advertising = AdvSpeedMap[pPort->PLinkSpeed][1]; + if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { + ecmd->advertising &= ~(SUPPORTED_1000baseT_Half); + } + } else { + ecmd->advertising = ecmd->supported; + } + + if (ecmd->autoneg == AUTONEG_ENABLE) + ecmd->advertising |= ADVERTISED_Autoneg; + } else { + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPP_FIBRE_ALL; + ecmd->advertising = ADV_FIBRE_ALL; + } + return 0; +} + +/* + * MIB infrastructure uses instance value starting at 1 + * based on board and port. + */ +static inline u32 pnmiInstance(const DEV_NET *pNet) +{ + return 1 + (pNet->pAC->RlmtNets == 2) + pNet->PortNr; +} + +/***************************************************************************** + * + * setSettings - configures the settings of a selected adapter + * + * Description: + * Possible settings that may be altered are a)speed, b)duplex or + * c)autonegotiation. + * + * Returns: + * 0: everything fine, no error + * <0: the return value is the error code of the failure + */ +static int setSettings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + u32 instance; + char buf[4]; + int len = 1; + + if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100 + && ecmd->speed != SPEED_1000) + return -EINVAL; + + if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) + return -EINVAL; + + if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE) + return -EINVAL; + + if (ecmd->autoneg == AUTONEG_DISABLE) + *buf = (ecmd->duplex == DUPLEX_FULL) + ? SK_LMODE_FULL : SK_LMODE_HALF; + else + *buf = (ecmd->duplex == DUPLEX_FULL) + ? SK_LMODE_AUTOFULL : SK_LMODE_AUTOHALF; + + instance = pnmiInstance(pNet); + if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_LINK_MODE, + &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK) + return -EINVAL; + + switch(ecmd->speed) { + case SPEED_1000: + *buf = SK_LSPEED_1000MBPS; + break; + case SPEED_100: + *buf = SK_LSPEED_100MBPS; + break; + case SPEED_10: + *buf = SK_LSPEED_10MBPS; + } + + if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, + &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK) + return -EINVAL; + + return 0; +} + +/***************************************************************************** + * + * getDriverInfo - returns generic driver and adapter information + * + * Description: + * Generic driver information is returned via this function, such as + * the name of the driver, its version and and firmware version. + * In addition to this, the location of the selected adapter is + * returned as a bus info string (e.g. '01:05.0'). + * + * Returns: N/A + * + */ +static void getDriverInfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + const DEV_NET *pNet = netdev_priv(dev); + const SK_AC *pAC = pNet->pAC; + char vers[32]; + + snprintf(vers, sizeof(vers)-1, VER_STRING "(v%d.%d)", + (pAC->GIni.GIPciHwRev >> 4) & 0xf, pAC->GIni.GIPciHwRev & 0xf); + + strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver)); + strcpy(info->version, vers); + strcpy(info->fw_version, "N/A"); + strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN); +} + +/* + * Ethtool statistics support. + */ +static const char StringsStats[][ETH_GSTRING_LEN] = { + "rx_packets", "tx_packets", + "rx_bytes", "tx_bytes", + "rx_errors", "tx_errors", + "rx_dropped", "tx_dropped", + "multicasts", "collisions", + "rx_length_errors", "rx_buffer_overflow_errors", + "rx_crc_errors", "rx_frame_errors", + "rx_too_short_errors", "rx_too_long_errors", + "rx_carrier_extension_errors", "rx_symbol_errors", + "rx_llc_mac_size_errors", "rx_carrier_errors", + "rx_jabber_errors", "rx_missed_errors", + "tx_abort_collision_errors", "tx_carrier_errors", + "tx_buffer_underrun_errors", "tx_heartbeat_errors", + "tx_window_errors", +}; + +static int getStatsCount(struct net_device *dev) +{ + return ARRAY_SIZE(StringsStats); +} + +static void getStrings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch(stringset) { + case ETH_SS_STATS: + memcpy(data, *StringsStats, sizeof(StringsStats)); + break; + } +} + +static void getEthtoolStats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + const DEV_NET *pNet = netdev_priv(dev); + const SK_AC *pAC = pNet->pAC; + const SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct; + + *data++ = pPnmiStruct->Stat[0].StatRxOkCts; + *data++ = pPnmiStruct->Stat[0].StatTxOkCts; + *data++ = pPnmiStruct->Stat[0].StatRxOctetsOkCts; + *data++ = pPnmiStruct->Stat[0].StatTxOctetsOkCts; + *data++ = pPnmiStruct->InErrorsCts; + *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts; + *data++ = pPnmiStruct->RxNoBufCts; + *data++ = pPnmiStruct->TxNoBufCts; + *data++ = pPnmiStruct->Stat[0].StatRxMulticastOkCts; + *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts; + *data++ = pPnmiStruct->Stat[0].StatRxRuntCts; + *data++ = pPnmiStruct->Stat[0].StatRxFifoOverflowCts; + *data++ = pPnmiStruct->Stat[0].StatRxFcsCts; + *data++ = pPnmiStruct->Stat[0].StatRxFramingCts; + *data++ = pPnmiStruct->Stat[0].StatRxShortsCts; + *data++ = pPnmiStruct->Stat[0].StatRxTooLongCts; + *data++ = pPnmiStruct->Stat[0].StatRxCextCts; + *data++ = pPnmiStruct->Stat[0].StatRxSymbolCts; + *data++ = pPnmiStruct->Stat[0].StatRxIRLengthCts; + *data++ = pPnmiStruct->Stat[0].StatRxCarrierCts; + *data++ = pPnmiStruct->Stat[0].StatRxJabberCts; + *data++ = pPnmiStruct->Stat[0].StatRxMissedCts; + *data++ = pAC->stats.tx_aborted_errors; + *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts; + *data++ = pPnmiStruct->Stat[0].StatTxFifoUnderrunCts; + *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts; + *data++ = pAC->stats.tx_window_errors; +} + + +/***************************************************************************** + * + * toggleLeds - Changes the LED state of an adapter + * + * Description: + * This function changes the current state of all LEDs of an adapter so + * that it can be located by a user. + * + * Returns: N/A + * + */ +static void toggleLeds(DEV_NET *pNet, int on) +{ + SK_AC *pAC = pNet->pAC; + int port = pNet->PortNr; + void __iomem *io = pAC->IoBase; + + if (pAC->GIni.GIGenesis) { + SK_OUT8(io, MR_ADDR(port,LNK_LED_REG), + on ? SK_LNK_ON : SK_LNK_OFF); + SkGeYellowLED(pAC, io, + on ? (LED_ON >> 1) : (LED_OFF >> 1)); + SkGeXmitLED(pAC, io, MR_ADDR(port,RX_LED_INI), + on ? SK_LED_TST : SK_LED_DIS); + + if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM) + SkXmPhyWrite(pAC, io, port, PHY_BCOM_P_EXT_CTRL, + on ? PHY_B_PEC_LED_ON : PHY_B_PEC_LED_OFF); + else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE) + SkXmPhyWrite(pAC, io, port, PHY_LONE_LED_CFG, + on ? 0x0800 : PHY_L_LC_LEDT); + else + SkGeXmitLED(pAC, io, MR_ADDR(port,TX_LED_INI), + on ? SK_LED_TST : SK_LED_DIS); + } else { + const u16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | + PHY_M_LED_MO_1000(MO_LED_ON) | + PHY_M_LED_MO_RX(MO_LED_ON)); + const u16 YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_1000(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_OFF)); + + + SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_CTRL,0); + SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_OVER, + on ? YukLedOn : YukLedOff); + } +} + +/***************************************************************************** + * + * skGeBlinkTimer - Changes the LED state of an adapter + * + * Description: + * This function changes the current state of all LEDs of an adapter so + * that it can be located by a user. If the requested time interval for + * this test has elapsed, this function cleans up everything that was + * temporarily setup during the locate NIC test. This involves of course + * also closing or opening any adapter so that the initial board state + * is recovered. + * + * Returns: N/A + * + */ +void SkGeBlinkTimer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + toggleLeds(pNet, pAC->LedsOn); + + pAC->LedsOn = !pAC->LedsOn; + mod_timer(&pAC->BlinkTimer, jiffies + HZ/4); +} + +/***************************************************************************** + * + * locateDevice - start the locate NIC feature of the elected adapter + * + * Description: + * This function is used if the user want to locate a particular NIC. + * All LEDs are regularly switched on and off, so the NIC can easily + * be identified. + * + * Returns: + * ==0: everything fine, no error, locateNIC test was started + * !=0: one locateNIC test runs already + * + */ +static int locateDevice(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + + /* start blinking */ + pAC->LedsOn = 0; + mod_timer(&pAC->BlinkTimer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&pAC->BlinkTimer); + toggleLeds(pNet, 0); + + return 0; +} + +/***************************************************************************** + * + * getPauseParams - retrieves the pause parameters + * + * Description: + * All current pause parameters of a selected adapter are placed + * in the passed ethtool_pauseparam structure and are returned. + * + * Returns: N/A + * + */ +static void getPauseParams(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr]; + + epause->rx_pause = (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC) || + (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM); + + epause->tx_pause = epause->rx_pause || (pPort->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND); + epause->autoneg = epause->rx_pause || epause->tx_pause; +} + +/***************************************************************************** + * + * setPauseParams - configures the pause parameters of an adapter + * + * Description: + * This function sets the Rx or Tx pause parameters + * + * Returns: + * ==0: everything fine, no error + * !=0: the return value is the error code of the failure + */ +static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *epause) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr]; + u32 instance = pnmiInstance(pNet); + struct ethtool_pauseparam old; + u8 oldspeed = pPort->PLinkSpeedUsed; + char buf[4]; + int len = 1; + int ret; + + /* + ** we have to determine the current settings to see if + ** the operator requested any modification of the flow + ** control parameters... + */ + getPauseParams(dev, &old); + + /* + ** perform modifications regarding the changes + ** requested by the operator + */ + if (epause->autoneg != old.autoneg) + *buf = epause->autoneg ? SK_FLOW_MODE_NONE : SK_FLOW_MODE_SYMMETRIC; + else { + if (epause->rx_pause && epause->tx_pause) + *buf = SK_FLOW_MODE_SYMMETRIC; + else if (epause->rx_pause && !epause->tx_pause) + *buf = SK_FLOW_MODE_SYM_OR_REM; + else if (!epause->rx_pause && epause->tx_pause) + *buf = SK_FLOW_MODE_LOC_SEND; + else + *buf = SK_FLOW_MODE_NONE; + } + + ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_FLOWCTRL_MODE, + &buf, &len, instance, pNet->NetNr); + + if (ret != SK_PNMI_ERR_OK) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL, + ("ethtool (sk98lin): error changing rx/tx pause (%i)\n", ret)); + goto err; + } + + /* + ** It may be that autoneg has been disabled! Therefore + ** set the speed to the previously used value... + */ + if (!epause->autoneg) { + len = 1; + ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, + &oldspeed, &len, instance, pNet->NetNr); + if (ret != SK_PNMI_ERR_OK) + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL, + ("ethtool (sk98lin): error setting speed (%i)\n", ret)); + } + err: + return ret ? -EIO : 0; +} + +/* Only Yukon supports checksum offload. */ +static int setScatterGather(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + return ethtool_op_set_sg(dev, data); +} + +static int setTxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + return ethtool_op_set_tx_csum(dev, data); +} + +static u32 getRxCsum(struct net_device *dev) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + return pAC->RxPort[pNet->PortNr].RxCsum; +} + +static int setRxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + pAC->RxPort[pNet->PortNr].RxCsum = data != 0; + return 0; +} + +static int getRegsLen(struct net_device *dev) +{ + return 0x4000; +} + +/* + * Returns copy of whole control register region + * Note: skip RAM address register because accessing it will + * cause bus hangs! + */ +static void getRegs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + DEV_NET *pNet = netdev_priv(dev); + const void __iomem *io = pNet->pAC->IoBase; + + regs->version = 1; + memset(p, 0, regs->len); + memcpy_fromio(p, io, B3_RAM_ADDR); + + memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); +} + +const struct ethtool_ops SkGeEthtoolOps = { + .get_settings = getSettings, + .set_settings = setSettings, + .get_drvinfo = getDriverInfo, + .get_strings = getStrings, + .get_stats_count = getStatsCount, + .get_ethtool_stats = getEthtoolStats, + .phys_id = locateDevice, + .get_pauseparam = getPauseParams, + .set_pauseparam = setPauseParams, + .get_link = ethtool_op_get_link, + .get_sg = ethtool_op_get_sg, + .set_sg = setScatterGather, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = setTxCsum, + .get_rx_csum = getRxCsum, + .set_rx_csum = setRxCsum, + .get_regs = getRegs, + .get_regs_len = getRegsLen, +}; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c new file mode 100644 index 00000000000..7dc9c9ebf5e --- /dev/null +++ b/drivers/net/sk98lin/skge.c @@ -0,0 +1,5219 @@ +/****************************************************************************** + * + * Name: skge.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.45 $ + * Date: $Date: 2004/02/12 14:41:02 $ + * Purpose: The main driver source module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet + * Server Adapters. + * + * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and + * SysKonnects GEnesis Solaris driver + * Author: Christoph Goos (cgoos@syskonnect.de) + * Mirko Lindner (mlindner@syskonnect.de) + * + * Address all question to: linux@syskonnect.de + * + * The technical manual for the adapters is available from SysKonnect's + * web pages: www.syskonnect.com + * Goto "Support" and search Knowledge Base for "manual". + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Possible compiler options (#define xxx / -Dxxx): + * + * debugging can be enable by changing SK_DEBUG_CHKMOD and + * SK_DEBUG_CHKCAT in makefile (described there). + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the main module of the Linux GE driver. + * + * All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h + * are part of SysKonnect's COMMON MODULES for the SK-98xx adapters. + * Those are used for drivers on multiple OS', so some thing may seem + * unnecessary complicated on Linux. Please do not try to 'clean up' + * them without VERY good reasons, because this will make it more + * difficult to keep the Linux driver in synchronisation with the + * other versions. + * + * Include file hierarchy: + * + * <linux/module.h> + * + * "h/skdrv1st.h" + * <linux/types.h> + * <linux/kernel.h> + * <linux/string.h> + * <linux/errno.h> + * <linux/ioport.h> + * <linux/slab.h> + * <linux/interrupt.h> + * <linux/pci.h> + * <linux/bitops.h> + * <asm/byteorder.h> + * <asm/io.h> + * <linux/netdevice.h> + * <linux/etherdevice.h> + * <linux/skbuff.h> + * those three depending on kernel version used: + * <linux/bios32.h> + * <linux/init.h> + * <asm/uaccess.h> + * <net/checksum.h> + * + * "h/skerror.h" + * "h/skdebug.h" + * "h/sktypes.h" + * "h/lm80.h" + * "h/xmac_ii.h" + * + * "h/skdrv2nd.h" + * "h/skqueue.h" + * "h/skgehwt.h" + * "h/sktimer.h" + * "h/ski2c.h" + * "h/skgepnmi.h" + * "h/skvpd.h" + * "h/skgehw.h" + * "h/skgeinit.h" + * "h/skaddr.h" + * "h/skgesirq.h" + * "h/skrlmt.h" + * + ******************************************************************************/ + +#include "h/skversion.h" + +#include <linux/in.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/ip.h> +#include <linux/mii.h> +#include <linux/mm.h> + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/******************************************************************************* + * + * Defines + * + ******************************************************************************/ + +/* for debuging on x86 only */ +/* #define BREAKPOINT() asm(" int $3"); */ + +/* use the transmit hw checksum driver functionality */ +#define USE_SK_TX_CHECKSUM + +/* use the receive hw checksum driver functionality */ +#define USE_SK_RX_CHECKSUM + +/* use the scatter-gather functionality with sendfile() */ +#define SK_ZEROCOPY + +/* use of a transmit complete interrupt */ +#define USE_TX_COMPLETE + +/* + * threshold for copying small receive frames + * set to 0 to avoid copying, set to 9001 to copy all frames + */ +#define SK_COPY_THRESHOLD 50 + +/* number of adapters that can be configured via command line params */ +#define SK_MAX_CARD_PARAM 16 + + + +/* + * use those defines for a compile-in version of the driver instead + * of command line parameters + */ +// #define LINK_SPEED_A {"Auto", } +// #define LINK_SPEED_B {"Auto", } +// #define AUTO_NEG_A {"Sense", } +// #define AUTO_NEG_B {"Sense", } +// #define DUP_CAP_A {"Both", } +// #define DUP_CAP_B {"Both", } +// #define FLOW_CTRL_A {"SymOrRem", } +// #define FLOW_CTRL_B {"SymOrRem", } +// #define ROLE_A {"Auto", } +// #define ROLE_B {"Auto", } +// #define PREF_PORT {"A", } +// #define CON_TYPE {"Auto", } +// #define RLMT_MODE {"CheckLinkState", } + +#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb) +#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb) +#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb) + + +/* Set blink mode*/ +#define OEM_CONFIG_VALUE ( SK_ACT_LED_BLINK | \ + SK_DUP_LED_NORMAL | \ + SK_LED_LINK100_ON) + + +/* Isr return value */ +#define SkIsrRetVar irqreturn_t +#define SkIsrRetNone IRQ_NONE +#define SkIsrRetHandled IRQ_HANDLED + + +/******************************************************************************* + * + * Local Function Prototypes + * + ******************************************************************************/ + +static void FreeResources(struct SK_NET_DEVICE *dev); +static int SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC); +static SK_BOOL BoardAllocMem(SK_AC *pAC); +static void BoardFreeMem(SK_AC *pAC); +static void BoardInitMem(SK_AC *pAC); +static void SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**, int*, SK_BOOL); +static SkIsrRetVar SkGeIsr(int irq, void *dev_id); +static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id); +static int SkGeOpen(struct SK_NET_DEVICE *dev); +static int SkGeClose(struct SK_NET_DEVICE *dev); +static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev); +static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p); +static void SkGeSetRxMode(struct SK_NET_DEVICE *dev); +static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev); +static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd); +static void GetConfiguration(SK_AC*); +static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*); +static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*); +static void FillRxRing(SK_AC*, RX_PORT*); +static SK_BOOL FillRxDescriptor(SK_AC*, RX_PORT*); +static void ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL); +static void ClearAndStartRx(SK_AC*, int); +static void ClearTxIrq(SK_AC*, int, int); +static void ClearRxRing(SK_AC*, RX_PORT*); +static void ClearTxRing(SK_AC*, TX_PORT*); +static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu); +static void PortReInitBmu(SK_AC*, int); +static int SkGeIocMib(DEV_NET*, unsigned int, int); +static int SkGeInitPCI(SK_AC *pAC); +static void StartDrvCleanupTimer(SK_AC *pAC); +static void StopDrvCleanupTimer(SK_AC *pAC); +static int XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*); + +#ifdef SK_DIAG_SUPPORT +static SK_U32 ParseDeviceNbrFromSlotName(const char *SlotName); +static int SkDrvInitAdapter(SK_AC *pAC, int devNbr); +static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr); +#endif + +/******************************************************************************* + * + * Extern Function Prototypes + * + ******************************************************************************/ +extern void SkDimEnableModerationIfNeeded(SK_AC *pAC); +extern void SkDimDisplayModerationSettings(SK_AC *pAC); +extern void SkDimStartModerationTimer(SK_AC *pAC); +extern void SkDimModerate(SK_AC *pAC); +extern void SkGeBlinkTimer(unsigned long data); + +#ifdef DEBUG +static void DumpMsg(struct sk_buff*, char*); +static void DumpData(char*, int); +static void DumpLong(char*, int); +#endif + +/* global variables *********************************************************/ +static SK_BOOL DoPrintInterfaceChange = SK_TRUE; +extern const struct ethtool_ops SkGeEthtoolOps; + +/* local variables **********************************************************/ +static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}}; +static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480}; + +/***************************************************************************** + * + * SkPciWriteCfgDWord - write a 32 bit value to pci config space + * + * Description: + * This routine writes a 32 bit value to the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +static inline int SkPciWriteCfgDWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U32 Val) /* pointer to store the read value */ +{ + pci_write_config_dword(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgDWord */ + +/***************************************************************************** + * + * SkGeInitPCI - Init the PCI resources + * + * Description: + * This function initialize the PCI resources and IO + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +static __devinit int SkGeInitPCI(SK_AC *pAC) +{ + struct SK_NET_DEVICE *dev = pAC->dev[0]; + struct pci_dev *pdev = pAC->PciDev; + int retval; + + dev->mem_start = pci_resource_start (pdev, 0); + pci_set_master(pdev); + + retval = pci_request_regions(pdev, "sk98lin"); + if (retval) + goto out; + +#ifdef SK_BIG_ENDIAN + /* + * On big endian machines, we use the adapter's aibility of + * reading the descriptors as big endian. + */ + { + SK_U32 our2; + SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2); + our2 |= PCI_REV_DESC; + SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2); + } +#endif + + /* + * Remap the regs into kernel space. + */ + pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000); + if (!pAC->IoBase) { + retval = -EIO; + goto out_release; + } + + return 0; + + out_release: + pci_release_regions(pdev); + out: + return retval; +} + + +/***************************************************************************** + * + * FreeResources - release resources allocated for adapter + * + * Description: + * This function releases the IRQ, unmaps the IO and + * frees the desriptor ring. + * + * Returns: N/A + * + */ +static void FreeResources(struct SK_NET_DEVICE *dev) +{ +SK_U32 AllocFlag; +DEV_NET *pNet; +SK_AC *pAC; + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + AllocFlag = pAC->AllocFlag; + if (pAC->PciDev) { + pci_release_regions(pAC->PciDev); + } + if (AllocFlag & SK_ALLOC_IRQ) { + free_irq(dev->irq, dev); + } + if (pAC->IoBase) { + iounmap(pAC->IoBase); + } + if (pAC->pDescrMem) { + BoardFreeMem(pAC); + } + +} /* FreeResources */ + +MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>"); +MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver"); +MODULE_LICENSE("GPL"); + +#ifdef LINK_SPEED_A +static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED; +#else +static char *Speed_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef LINK_SPEED_B +static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED; +#else +static char *Speed_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef AUTO_NEG_A +static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A; +#else +static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef DUP_CAP_A +static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A; +#else +static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef FLOW_CTRL_A +static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A; +#else +static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef ROLE_A +static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A; +#else +static char *Role_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef AUTO_NEG_B +static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B; +#else +static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef DUP_CAP_B +static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B; +#else +static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef FLOW_CTRL_B +static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B; +#else +static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef ROLE_B +static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B; +#else +static char *Role_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef CON_TYPE +static char *ConType[SK_MAX_CARD_PARAM] = CON_TYPE; +#else +static char *ConType[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef PREF_PORT +static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT; +#else +static char *PrefPort[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef RLMT_MODE +static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE; +#else +static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", }; +#endif + +static int IntsPerSec[SK_MAX_CARD_PARAM]; +static char *Moderation[SK_MAX_CARD_PARAM]; +static char *ModerationMask[SK_MAX_CARD_PARAM]; +static char *AutoSizing[SK_MAX_CARD_PARAM]; +static char *Stats[SK_MAX_CARD_PARAM]; + +module_param_array(Speed_A, charp, NULL, 0); +module_param_array(Speed_B, charp, NULL, 0); +module_param_array(AutoNeg_A, charp, NULL, 0); +module_param_array(AutoNeg_B, charp, NULL, 0); +module_param_array(DupCap_A, charp, NULL, 0); +module_param_array(DupCap_B, charp, NULL, 0); +module_param_array(FlowCtrl_A, charp, NULL, 0); +module_param_array(FlowCtrl_B, charp, NULL, 0); +module_param_array(Role_A, charp, NULL, 0); +module_param_array(Role_B, charp, NULL, 0); +module_param_array(ConType, charp, NULL, 0); +module_param_array(PrefPort, charp, NULL, 0); +module_param_array(RlmtMode, charp, NULL, 0); +/* used for interrupt moderation */ +module_param_array(IntsPerSec, int, NULL, 0); +module_param_array(Moderation, charp, NULL, 0); +module_param_array(Stats, charp, NULL, 0); +module_param_array(ModerationMask, charp, NULL, 0); +module_param_array(AutoSizing, charp, NULL, 0); + +/***************************************************************************** + * + * SkGeBoardInit - do level 0 and 1 initialization + * + * Description: + * This function prepares the board hardware for running. The desriptor + * ring is set up, the IRQ is allocated and the configuration settings + * are examined. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC) +{ +short i; +unsigned long Flags; +char *DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */ +char *VerStr = VER_STRING; +int Ret; /* return code of request_irq */ +SK_BOOL DualNet; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("IoBase: %08lX\n", (unsigned long)pAC->IoBase)); + for (i=0; i<SK_MAX_MACS; i++) { + pAC->TxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0]; + pAC->TxPort[i][0].PortIndex = i; + pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i]; + pAC->RxPort[i].PortIndex = i; + } + + /* Initialize the mutexes */ + for (i=0; i<SK_MAX_MACS; i++) { + spin_lock_init(&pAC->TxPort[i][0].TxDesRingLock); + spin_lock_init(&pAC->RxPort[i].RxDesRingLock); + } + spin_lock_init(&pAC->SlowPathLock); + + /* setup phy_id blink timer */ + pAC->BlinkTimer.function = SkGeBlinkTimer; + pAC->BlinkTimer.data = (unsigned long) dev; + init_timer(&pAC->BlinkTimer); + + /* level 0 init common modules here */ + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + /* Does a RESET on board ...*/ + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) { + printk("HWInit (0) failed.\n"); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return -EIO; + } + SkI2cInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_DATA); + + pAC->BoardLevel = SK_INIT_DATA; + pAC->RxBufSize = ETH_BUF_SIZE; + + SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString); + SK_PNMI_SET_DRIVER_VER(pAC, VerStr); + + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + /* level 1 init common modules here (HW init) */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) { + printk("sk98lin: HWInit (1) failed.\n"); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return -EIO; + } + SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO); + SkEventInit(pAC, pAC->IoBase, SK_INIT_IO); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO); + + /* Set chipset type support */ + pAC->ChipsetType = 0; + if ((pAC->GIni.GIChipId == CHIP_ID_YUKON) || + (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE)) { + pAC->ChipsetType = 1; + } + + GetConfiguration(pAC); + if (pAC->RlmtNets == 2) { + pAC->GIni.GIPortUsage = SK_MUL_LINK; + } + + pAC->BoardLevel = SK_INIT_IO; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + if (pAC->GIni.GIMacsFound == 2) { + Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev); + } else if (pAC->GIni.GIMacsFound == 1) { + Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, + "sk98lin", dev); + } else { + printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n", + pAC->GIni.GIMacsFound); + return -EIO; + } + + if (Ret) { + printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n", + dev->irq); + return Ret; + } + pAC->AllocFlag |= SK_ALLOC_IRQ; + + /* Alloc memory for this board (Mem for RxD/TxD) : */ + if(!BoardAllocMem(pAC)) { + printk("No memory for descriptor rings.\n"); + return -ENOMEM; + } + + BoardInitMem(pAC); + /* tschilling: New common function with minimum size check. */ + DualNet = SK_FALSE; + if (pAC->RlmtNets == 2) { + DualNet = SK_TRUE; + } + + if (SkGeInitAssignRamToQueues( + pAC, + pAC->ActivePort, + DualNet)) { + BoardFreeMem(pAC); + printk("sk98lin: SkGeInitAssignRamToQueues failed.\n"); + return -EIO; + } + + return (0); +} /* SkGeBoardInit */ + + +/***************************************************************************** + * + * BoardAllocMem - allocate the memory for the descriptor rings + * + * Description: + * This function allocates the memory for all descriptor rings. + * Each ring is aligned for the desriptor alignment and no ring + * has a 4 GByte boundary in it (because the upper 32 bit must + * be constant for all descriptiors in one rings). + * + * Returns: + * SK_TRUE, if all memory could be allocated + * SK_FALSE, if not + */ +static __devinit SK_BOOL BoardAllocMem(SK_AC *pAC) +{ +caddr_t pDescrMem; /* pointer to descriptor memory area */ +size_t AllocLength; /* length of complete descriptor area */ +int i; /* loop counter */ +unsigned long BusAddr; + + + /* rings plus one for alignment (do not cross 4 GB boundary) */ + /* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */ +#if (BITS_PER_LONG == 32) + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8; +#else + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + + RX_RING_SIZE + 8; +#endif + + pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength, + &pAC->pDescrMemDMA); + + if (pDescrMem == NULL) { + return (SK_FALSE); + } + pAC->pDescrMem = pDescrMem; + BusAddr = (unsigned long) pAC->pDescrMemDMA; + + /* Descriptors need 8 byte alignment, and this is ensured + * by pci_alloc_consistent. + */ + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, + ("TX%d/A: pDescrMem: %lX, PhysDescrMem: %lX\n", + i, (unsigned long) pDescrMem, + BusAddr)); + pAC->TxPort[i][0].pTxDescrRing = pDescrMem; + pAC->TxPort[i][0].VTxDescrRing = BusAddr; + pDescrMem += TX_RING_SIZE; + BusAddr += TX_RING_SIZE; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, + ("RX%d: pDescrMem: %lX, PhysDescrMem: %lX\n", + i, (unsigned long) pDescrMem, + (unsigned long)BusAddr)); + pAC->RxPort[i].pRxDescrRing = pDescrMem; + pAC->RxPort[i].VRxDescrRing = BusAddr; + pDescrMem += RX_RING_SIZE; + BusAddr += RX_RING_SIZE; + } /* for */ + + return (SK_TRUE); +} /* BoardAllocMem */ + + +/**************************************************************************** + * + * BoardFreeMem - reverse of BoardAllocMem + * + * Description: + * Free all memory allocated in BoardAllocMem: adapter context, + * descriptor rings, locks. + * + * Returns: N/A + */ +static void BoardFreeMem( +SK_AC *pAC) +{ +size_t AllocLength; /* length of complete descriptor area */ + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("BoardFreeMem\n")); +#if (BITS_PER_LONG == 32) + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8; +#else + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + + RX_RING_SIZE + 8; +#endif + + pci_free_consistent(pAC->PciDev, AllocLength, + pAC->pDescrMem, pAC->pDescrMemDMA); + pAC->pDescrMem = NULL; +} /* BoardFreeMem */ + + +/***************************************************************************** + * + * BoardInitMem - initiate the descriptor rings + * + * Description: + * This function sets the descriptor rings up in memory. + * The adapter is initialized with the descriptor start addresses. + * + * Returns: N/A + */ +static __devinit void BoardInitMem(SK_AC *pAC) +{ +int i; /* loop counter */ +int RxDescrSize; /* the size of a rx descriptor rounded up to alignment*/ +int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/ + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("BoardInitMem\n")); + + RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; + pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize; + TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; + pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize; + + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + SetupRing( + pAC, + pAC->TxPort[i][0].pTxDescrRing, + pAC->TxPort[i][0].VTxDescrRing, + (RXD**)&pAC->TxPort[i][0].pTxdRingHead, + (RXD**)&pAC->TxPort[i][0].pTxdRingTail, + (RXD**)&pAC->TxPort[i][0].pTxdRingPrev, + &pAC->TxPort[i][0].TxdRingFree, + SK_TRUE); + SetupRing( + pAC, + pAC->RxPort[i].pRxDescrRing, + pAC->RxPort[i].VRxDescrRing, + &pAC->RxPort[i].pRxdRingHead, + &pAC->RxPort[i].pRxdRingTail, + &pAC->RxPort[i].pRxdRingPrev, + &pAC->RxPort[i].RxdRingFree, + SK_FALSE); + } +} /* BoardInitMem */ + + +/***************************************************************************** + * + * SetupRing - create one descriptor ring + * + * Description: + * This function creates one descriptor ring in the given memory area. + * The head, tail and number of free descriptors in the ring are set. + * + * Returns: + * none + */ +static void SetupRing( +SK_AC *pAC, +void *pMemArea, /* a pointer to the memory area for the ring */ +uintptr_t VMemArea, /* the virtual bus address of the memory area */ +RXD **ppRingHead, /* address where the head should be written */ +RXD **ppRingTail, /* address where the tail should be written */ +RXD **ppRingPrev, /* address where the tail should be written */ +int *pRingFree, /* address where the # of free descr. goes */ +SK_BOOL IsTx) /* flag: is this a tx ring */ +{ +int i; /* loop counter */ +int DescrSize; /* the size of a descriptor rounded up to alignment*/ +int DescrNum; /* number of descriptors per ring */ +RXD *pDescr; /* pointer to a descriptor (receive or transmit) */ +RXD *pNextDescr; /* pointer to the next descriptor */ +RXD *pPrevDescr; /* pointer to the previous descriptor */ +uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ + + if (IsTx == SK_TRUE) { + DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * + DESCR_ALIGN; + DescrNum = TX_RING_SIZE / DescrSize; + } else { + DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * + DESCR_ALIGN; + DescrNum = RX_RING_SIZE / DescrSize; + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, + ("Descriptor size: %d Descriptor Number: %d\n", + DescrSize,DescrNum)); + + pDescr = (RXD*) pMemArea; + pPrevDescr = NULL; + pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); + VNextDescr = VMemArea + DescrSize; + for(i=0; i<DescrNum; i++) { + /* set the pointers right */ + pDescr->VNextRxd = VNextDescr & 0xffffffffULL; + pDescr->pNextRxd = pNextDescr; + if (!IsTx) pDescr->TcpSumStarts = ETH_HLEN << 16 | ETH_HLEN; + + /* advance one step */ + pPrevDescr = pDescr; + pDescr = pNextDescr; + pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); + VNextDescr += DescrSize; + } + pPrevDescr->pNextRxd = (RXD*) pMemArea; + pPrevDescr->VNextRxd = VMemArea; + pDescr = (RXD*) pMemArea; + *ppRingHead = (RXD*) pMemArea; + *ppRingTail = *ppRingHead; + *ppRingPrev = pPrevDescr; + *pRingFree = DescrNum; +} /* SetupRing */ + + +/***************************************************************************** + * + * PortReInitBmu - re-initiate the descriptor rings for one port + * + * Description: + * This function reinitializes the descriptor rings of one port + * in memory. The port must be stopped before. + * The HW is initialized with the descriptor start addresses. + * + * Returns: + * none + */ +static void PortReInitBmu( +SK_AC *pAC, /* pointer to adapter context */ +int PortIndex) /* index of the port for which to re-init */ +{ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("PortReInitBmu ")); + + /* set address of first descriptor of ring in BMU */ + SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_L, + (uint32_t)(((caddr_t) + (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) - + pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing + + pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) & + 0xFFFFFFFF)); + SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_H, + (uint32_t)(((caddr_t) + (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) - + pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing + + pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32)); + SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_L, + (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) - + pAC->RxPort[PortIndex].pRxDescrRing + + pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF)); + SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_H, + (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) - + pAC->RxPort[PortIndex].pRxDescrRing + + pAC->RxPort[PortIndex].VRxDescrRing) >> 32)); +} /* PortReInitBmu */ + + +/**************************************************************************** + * + * SkGeIsr - handle adapter interrupts + * + * Description: + * The interrupt routine is called when the network adapter + * generates an interrupt. It may also be called if another device + * shares this interrupt vector with the driver. + * + * Returns: N/A + * + */ +static SkIsrRetVar SkGeIsr(int irq, void *dev_id) +{ +struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; +DEV_NET *pNet; +SK_AC *pAC; +SK_U32 IntSrc; /* interrupts source register contents */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + /* + * Check and process if its our interrupt + */ + SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc); + if (IntSrc == 0) { + return SkIsrRetNone; + } + + while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { +#if 0 /* software irq currently not used */ + if (IntSrc & IS_IRQ_SW) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("Software IRQ\n")); + } +#endif + if (IntSrc & IS_R1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF RX1 IRQ\n")); + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + SK_PNMI_CNT_RX_INTR(pAC, 0); + } + if (IntSrc & IS_R2_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF RX2 IRQ\n")); + ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE); + SK_PNMI_CNT_RX_INTR(pAC, 1); + } +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF AS TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 0); + spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]); + spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + } + if (IntSrc & IS_XA2_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF AS TX2 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 1); + spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock); + FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]); + spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock); + } +#if 0 /* only if sync. queues used */ + if (IntSrc & IS_XS1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF SY TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 1); + spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH); + spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + ClearTxIrq(pAC, 0, TX_PRIO_HIGH); + } + if (IntSrc & IS_XS2_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF SY TX2 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 1); + spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock); + FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH); + spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock); + ClearTxIrq(pAC, 1, TX_PRIO_HIGH); + } +#endif +#endif + + /* do all IO at once */ + if (IntSrc & IS_R1_F) + ClearAndStartRx(pAC, 0); + if (IntSrc & IS_R2_F) + ClearAndStartRx(pAC, 1); +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) + ClearTxIrq(pAC, 0, TX_PRIO_LOW); + if (IntSrc & IS_XA2_F) + ClearTxIrq(pAC, 1, TX_PRIO_LOW); +#endif + SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); + } /* while (IntSrc & IRQ_MASK != 0) */ + + IntSrc &= pAC->GIni.GIValIrqMask; + if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, + ("SPECIAL IRQ DP-Cards => %x\n", IntSrc)); + pAC->CheckQueue = SK_FALSE; + spin_lock(&pAC->SlowPathLock); + if (IntSrc & SPECIAL_IRQS) + SkGeSirqIsr(pAC, pAC->IoBase, IntSrc); + + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock(&pAC->SlowPathLock); + } + /* + * do it all again is case we cleared an interrupt that + * came in after handling the ring (OUTs may be delayed + * in hardware buffers, but are through after IN) + * + * rroesler: has been commented out and shifted to + * SkGeDrvEvent(), because it is timer + * guarded now + * + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE); + */ + + if (pAC->CheckQueue) { + pAC->CheckQueue = SK_FALSE; + spin_lock(&pAC->SlowPathLock); + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock(&pAC->SlowPathLock); + } + + /* IRQ is processed - Enable IRQs again*/ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + + return SkIsrRetHandled; +} /* SkGeIsr */ + + +/**************************************************************************** + * + * SkGeIsrOnePort - handle adapter interrupts for single port adapter + * + * Description: + * The interrupt routine is called when the network adapter + * generates an interrupt. It may also be called if another device + * shares this interrupt vector with the driver. + * This is the same as above, but handles only one port. + * + * Returns: N/A + * + */ +static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id) +{ +struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; +DEV_NET *pNet; +SK_AC *pAC; +SK_U32 IntSrc; /* interrupts source register contents */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + /* + * Check and process if its our interrupt + */ + SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc); + if (IntSrc == 0) { + return SkIsrRetNone; + } + + while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { +#if 0 /* software irq currently not used */ + if (IntSrc & IS_IRQ_SW) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("Software IRQ\n")); + } +#endif + if (IntSrc & IS_R1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF RX1 IRQ\n")); + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + SK_PNMI_CNT_RX_INTR(pAC, 0); + } +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF AS TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 0); + spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]); + spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + } +#if 0 /* only if sync. queues used */ + if (IntSrc & IS_XS1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF SY TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 0); + spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH); + spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + ClearTxIrq(pAC, 0, TX_PRIO_HIGH); + } +#endif +#endif + + /* do all IO at once */ + if (IntSrc & IS_R1_F) + ClearAndStartRx(pAC, 0); +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) + ClearTxIrq(pAC, 0, TX_PRIO_LOW); +#endif + SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); + } /* while (IntSrc & IRQ_MASK != 0) */ + + IntSrc &= pAC->GIni.GIValIrqMask; + if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, + ("SPECIAL IRQ SP-Cards => %x\n", IntSrc)); + pAC->CheckQueue = SK_FALSE; + spin_lock(&pAC->SlowPathLock); + if (IntSrc & SPECIAL_IRQS) + SkGeSirqIsr(pAC, pAC->IoBase, IntSrc); + + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock(&pAC->SlowPathLock); + } + /* + * do it all again is case we cleared an interrupt that + * came in after handling the ring (OUTs may be delayed + * in hardware buffers, but are through after IN) + * + * rroesler: has been commented out and shifted to + * SkGeDrvEvent(), because it is timer + * guarded now + * + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + */ + + /* IRQ is processed - Enable IRQs again*/ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + + return SkIsrRetHandled; +} /* SkGeIsrOnePort */ + +#ifdef CONFIG_NET_POLL_CONTROLLER +/**************************************************************************** + * + * SkGePollController - polling receive, for netconsole + * + * Description: + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + * + * Returns: N/A + */ +static void SkGePollController(struct net_device *dev) +{ + disable_irq(dev->irq); + SkGeIsr(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/**************************************************************************** + * + * SkGeOpen - handle start of initialized adapter + * + * Description: + * This function starts the initialized adapter. + * The board level variable is set and the adapter is + * brought to full functionality. + * The device flags are set for operation. + * Do all necessary level 2 initialization, enable interrupts and + * give start command to RLMT. + * + * Returns: + * 0 on success + * != 0 on error + */ +static int SkGeOpen( +struct SK_NET_DEVICE *dev) +{ + DEV_NET *pNet; + SK_AC *pAC; + unsigned long Flags; /* for spin lock */ + int i; + SK_EVPARA EvPara; /* an event parameter union */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC)); + +#ifdef SK_DIAG_SUPPORT + if (pAC->DiagModeActive == DIAG_ACTIVE) { + if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { + return (-1); /* still in use by diag; deny actions */ + } + } +#endif + + /* Set blink mode */ + if ((pAC->PciDev->vendor == 0x1186) || (pAC->PciDev->vendor == 0x11ab )) + pAC->GIni.GILedBlinkCtrl = OEM_CONFIG_VALUE; + + if (pAC->BoardLevel == SK_INIT_DATA) { + /* level 1 init common modules here */ + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) { + printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name); + return (-1); + } + SkI2cInit (pAC, pAC->IoBase, SK_INIT_IO); + SkEventInit (pAC, pAC->IoBase, SK_INIT_IO); + SkPnmiInit (pAC, pAC->IoBase, SK_INIT_IO); + SkAddrInit (pAC, pAC->IoBase, SK_INIT_IO); + SkRlmtInit (pAC, pAC->IoBase, SK_INIT_IO); + SkTimerInit (pAC, pAC->IoBase, SK_INIT_IO); + pAC->BoardLevel = SK_INIT_IO; + } + + if (pAC->BoardLevel != SK_INIT_RUN) { + /* tschilling: Level 2 init modules here, check return value. */ + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_RUN) != 0) { + printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name); + return (-1); + } + SkI2cInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkEventInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkPnmiInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkAddrInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkRlmtInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkTimerInit (pAC, pAC->IoBase, SK_INIT_RUN); + pAC->BoardLevel = SK_INIT_RUN; + } + + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + /* Enable transmit descriptor polling. */ + SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE); + FillRxRing(pAC, &pAC->RxPort[i]); + } + SkGeYellowLED(pAC, pAC->IoBase, 1); + + StartDrvCleanupTimer(pAC); + SkDimEnableModerationIfNeeded(pAC); + SkDimDisplayModerationSettings(pAC); + + pAC->GIni.GIValIrqMask &= IRQ_MASK; + + /* enable Interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK); + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + + if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) { + EvPara.Para32[0] = pAC->RlmtNets; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, + EvPara); + EvPara.Para32[0] = pAC->RlmtMode; + EvPara.Para32[1] = 0; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE, + EvPara); + } + + EvPara.Para32[0] = pNet->NetNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + pAC->MaxPorts++; + + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeOpen suceeded\n")); + + return (0); +} /* SkGeOpen */ + + +/**************************************************************************** + * + * SkGeClose - Stop initialized adapter + * + * Description: + * Close initialized adapter. + * + * Returns: + * 0 - on success + * error code - on error + */ +static int SkGeClose( +struct SK_NET_DEVICE *dev) +{ + DEV_NET *pNet; + DEV_NET *newPtrNet; + SK_AC *pAC; + + unsigned long Flags; /* for spin lock */ + int i; + int PortIdx; + SK_EVPARA EvPara; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeClose: pAC=0x%lX ", (unsigned long)pAC)); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + +#ifdef SK_DIAG_SUPPORT + if (pAC->DiagModeActive == DIAG_ACTIVE) { + if (pAC->DiagFlowCtrl == SK_FALSE) { + /* + ** notify that the interface which has been closed + ** by operator interaction must not be started up + ** again when the DIAG has finished. + */ + newPtrNet = netdev_priv(pAC->dev[0]); + if (newPtrNet == pNet) { + pAC->WasIfUp[0] = SK_FALSE; + } else { + pAC->WasIfUp[1] = SK_FALSE; + } + return 0; /* return to system everything is fine... */ + } else { + pAC->DiagFlowCtrl = SK_FALSE; + } + } +#endif + + netif_stop_queue(dev); + + if (pAC->RlmtNets == 1) + PortIdx = pAC->ActivePort; + else + PortIdx = pNet->NetNr; + + StopDrvCleanupTimer(pAC); + + /* + * Clear multicast table, promiscuous mode .... + */ + SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_NONE); + + if (pAC->MaxPorts == 1) { + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + EvPara.Para32[0] = pNet->NetNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + /* stop the hardware */ + SkGeDeInit(pAC, pAC->IoBase); + pAC->BoardLevel = SK_INIT_DATA; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + } else { + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + EvPara.Para32[0] = pNet->NetNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkPnmiEvent(pAC, pAC->IoBase, SK_PNMI_EVT_XMAC_RESET, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + /* Stop port */ + spin_lock_irqsave(&pAC->TxPort[pNet->PortNr] + [TX_PRIO_LOW].TxDesRingLock, Flags); + SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr, + SK_STOP_ALL, SK_HARD_RST); + spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr] + [TX_PRIO_LOW].TxDesRingLock, Flags); + } + + if (pAC->RlmtNets == 1) { + /* clear all descriptor rings */ + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE); + ClearRxRing(pAC, &pAC->RxPort[i]); + ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]); + } + } else { + /* clear port descriptor rings */ + ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE); + ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]); + ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]); + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeClose: done ")); + + SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA)); + SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct), + sizeof(SK_PNMI_STRUCT_DATA)); + + pAC->MaxPorts--; + + return (0); +} /* SkGeClose */ + + +/***************************************************************************** + * + * SkGeXmit - Linux frame transmit function + * + * Description: + * The system calls this function to send frames onto the wire. + * It puts the frame in the tx descriptor ring. If the ring is + * full then, the 'tbusy' flag is set. + * + * Returns: + * 0, if everything is ok + * !=0, on error + * WARNING: returning 1 in 'tbusy' case caused system crashes (double + * allocated skb's) !!! + */ +static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev) +{ +DEV_NET *pNet; +SK_AC *pAC; +int Rc; /* return code of XmitFrame */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + if ((!skb_shinfo(skb)->nr_frags) || + (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) { + /* Don't activate scatter-gather and hardware checksum */ + + if (pAC->RlmtNets == 2) + Rc = XmitFrame( + pAC, + &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], + skb); + else + Rc = XmitFrame( + pAC, + &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], + skb); + } else { + /* scatter-gather and hardware TCP checksumming anabled*/ + if (pAC->RlmtNets == 2) + Rc = XmitFrameSG( + pAC, + &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], + skb); + else + Rc = XmitFrameSG( + pAC, + &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], + skb); + } + + /* Transmitter out of resources? */ + if (Rc <= 0) { + netif_stop_queue(dev); + } + + /* If not taken, give buffer ownership back to the + * queueing layer. + */ + if (Rc < 0) + return (1); + + dev->trans_start = jiffies; + return (0); +} /* SkGeXmit */ + + +/***************************************************************************** + * + * XmitFrame - fill one socket buffer into the transmit ring + * + * Description: + * This function puts a message into the transmit descriptor ring + * if there is a descriptors left. + * Linux skb's consist of only one continuous buffer. + * The first step locks the ring. It is held locked + * all time to avoid problems with SWITCH_../PORT_RESET. + * Then the descriptoris allocated. + * The second part is linking the buffer to the descriptor. + * At the very last, the Control field of the descriptor + * is made valid for the BMU and a start TX command is given + * if necessary. + * + * Returns: + * > 0 - on succes: the number of bytes in the message + * = 0 - on resource shortage: this frame sent or dropped, now + * the ring is full ( -> set tbusy) + * < 0 - on failure: other problems ( -> return failure to upper layers) + */ +static int XmitFrame( +SK_AC *pAC, /* pointer to adapter context */ +TX_PORT *pTxPort, /* pointer to struct of port to send to */ +struct sk_buff *pMessage) /* pointer to send-message */ +{ + TXD *pTxd; /* the rxd to fill */ + TXD *pOldTxd; + unsigned long Flags; + SK_U64 PhysAddr; + int BytesSend = pMessage->len; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X")); + + spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); +#ifndef USE_TX_COMPLETE + FreeTxDescriptors(pAC, pTxPort); +#endif + if (pTxPort->TxdRingFree == 0) { + /* + ** no enough free descriptors in ring at the moment. + ** Maybe free'ing some old one help? + */ + FreeTxDescriptors(pAC, pTxPort); + if (pTxPort->TxdRingFree == 0) { + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_TX_PROGRESS, + ("XmitFrame failed\n")); + /* + ** the desired message can not be sent + ** Because tbusy seems to be set, the message + ** should not be freed here. It will be used + ** by the scheduler of the ethernet handler + */ + return (-1); + } + } + + /* + ** If the passed socket buffer is of smaller MTU-size than 60, + ** copy everything into new buffer and fill all bytes between + ** the original packet end and the new packet end of 60 with 0x00. + ** This is to resolve faulty padding by the HW with 0xaa bytes. + */ + if (BytesSend < C_LEN_ETHERNET_MINSIZE) { + if (skb_padto(pMessage, C_LEN_ETHERNET_MINSIZE)) { + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + return 0; + } + pMessage->len = C_LEN_ETHERNET_MINSIZE; + } + + /* + ** advance head counter behind descriptor needed for this frame, + ** so that needed descriptor is reserved from that on. The next + ** action will be to add the passed buffer to the TX-descriptor + */ + pTxd = pTxPort->pTxdRingHead; + pTxPort->pTxdRingHead = pTxd->pNextTxd; + pTxPort->TxdRingFree--; + +#ifdef SK_DUMP_TX + DumpMsg(pMessage, "XmitFrame"); +#endif + + /* + ** First step is to map the data to be sent via the adapter onto + ** the DMA memory. Kernel 2.2 uses virt_to_bus(), but kernels 2.4 + ** and 2.6 need to use pci_map_page() for that mapping. + */ + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + virt_to_page(pMessage->data), + ((unsigned long) pMessage->data & ~PAGE_MASK), + pMessage->len, + PCI_DMA_TODEVICE); + pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + pTxd->pMBuf = pMessage; + + if (pMessage->ip_summed == CHECKSUM_PARTIAL) { + u16 hdrlen = skb_transport_offset(pMessage); + u16 offset = hdrlen + pMessage->csum_offset; + + if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) && + (pAC->GIni.GIChipRev == 0) && + (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { + pTxd->TBControl = BMU_TCP_CHECK; + } else { + pTxd->TBControl = BMU_UDP_CHECK; + } + + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; + + pTxd->TBControl |= BMU_OWN | BMU_STF | + BMU_SW | BMU_EOF | +#ifdef USE_TX_COMPLETE + BMU_IRQ_EOF | +#endif + pMessage->len; + } else { + pTxd->TBControl = BMU_OWN | BMU_STF | BMU_CHECK | + BMU_SW | BMU_EOF | +#ifdef USE_TX_COMPLETE + BMU_IRQ_EOF | +#endif + pMessage->len; + } + + /* + ** If previous descriptor already done, give TX start cmd + */ + pOldTxd = xchg(&pTxPort->pTxdRingPrev, pTxd); + if ((pOldTxd->TBControl & BMU_OWN) == 0) { + SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START); + } + + /* + ** after releasing the lock, the skb may immediately be free'd + */ + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + if (pTxPort->TxdRingFree != 0) { + return (BytesSend); + } else { + return (0); + } + +} /* XmitFrame */ + +/***************************************************************************** + * + * XmitFrameSG - fill one socket buffer into the transmit ring + * (use SG and TCP/UDP hardware checksumming) + * + * Description: + * This function puts a message into the transmit descriptor ring + * if there is a descriptors left. + * + * Returns: + * > 0 - on succes: the number of bytes in the message + * = 0 - on resource shortage: this frame sent or dropped, now + * the ring is full ( -> set tbusy) + * < 0 - on failure: other problems ( -> return failure to upper layers) + */ +static int XmitFrameSG( +SK_AC *pAC, /* pointer to adapter context */ +TX_PORT *pTxPort, /* pointer to struct of port to send to */ +struct sk_buff *pMessage) /* pointer to send-message */ +{ + + TXD *pTxd; + TXD *pTxdFst; + TXD *pTxdLst; + int CurrFrag; + int BytesSend; + skb_frag_t *sk_frag; + SK_U64 PhysAddr; + unsigned long Flags; + SK_U32 Control; + + spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); +#ifndef USE_TX_COMPLETE + FreeTxDescriptors(pAC, pTxPort); +#endif + if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) { + FreeTxDescriptors(pAC, pTxPort); + if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) { + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_TX_PROGRESS, + ("XmitFrameSG failed - Ring full\n")); + /* this message can not be sent now */ + return(-1); + } + } + + pTxd = pTxPort->pTxdRingHead; + pTxdFst = pTxd; + pTxdLst = pTxd; + BytesSend = 0; + + /* + ** Map the first fragment (header) into the DMA-space + */ + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + virt_to_page(pMessage->data), + ((unsigned long) pMessage->data & ~PAGE_MASK), + skb_headlen(pMessage), + PCI_DMA_TODEVICE); + + pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + + /* + ** Does the HW need to evaluate checksum for TCP or UDP packets? + */ + if (pMessage->ip_summed == CHECKSUM_PARTIAL) { + u16 hdrlen = skb_transport_offset(pMessage); + u16 offset = hdrlen + pMessage->csum_offset; + + Control = BMU_STFWD; + + /* + ** We have to use the opcode for tcp here, because the + ** opcode for udp is not working in the hardware yet + ** (Revision 2.0) + */ + if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) && + (pAC->GIni.GIChipRev == 0) && + (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { + Control |= BMU_TCP_CHECK; + } else { + Control |= BMU_UDP_CHECK; + } + + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; + } else + Control = BMU_CHECK | BMU_SW; + + pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage); + + pTxd = pTxd->pNextTxd; + pTxPort->TxdRingFree--; + BytesSend += skb_headlen(pMessage); + + /* + ** Browse over all SG fragments and map each of them into the DMA space + */ + for (CurrFrag = 0; CurrFrag < skb_shinfo(pMessage)->nr_frags; CurrFrag++) { + sk_frag = &skb_shinfo(pMessage)->frags[CurrFrag]; + /* + ** we already have the proper value in entry + */ + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + sk_frag->page, + sk_frag->page_offset, + sk_frag->size, + PCI_DMA_TODEVICE); + + pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + pTxd->pMBuf = pMessage; + + pTxd->TBControl = Control | BMU_OWN | sk_frag->size; + + /* + ** Do we have the last fragment? + */ + if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) { +#ifdef USE_TX_COMPLETE + pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF; +#else + pTxd->TBControl |= BMU_EOF; +#endif + pTxdFst->TBControl |= BMU_OWN | BMU_SW; + } + pTxdLst = pTxd; + pTxd = pTxd->pNextTxd; + pTxPort->TxdRingFree--; + BytesSend += sk_frag->size; + } + + /* + ** If previous descriptor already done, give TX start cmd + */ + if ((pTxPort->pTxdRingPrev->TBControl & BMU_OWN) == 0) { + SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START); + } + + pTxPort->pTxdRingPrev = pTxdLst; + pTxPort->pTxdRingHead = pTxd; + + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + + if (pTxPort->TxdRingFree > 0) { + return (BytesSend); + } else { + return (0); + } +} + +/***************************************************************************** + * + * FreeTxDescriptors - release descriptors from the descriptor ring + * + * Description: + * This function releases descriptors from a transmit ring if they + * have been sent by the BMU. + * If a descriptors is sent, it can be freed and the message can + * be freed, too. + * The SOFTWARE controllable bit is used to prevent running around a + * completely free ring for ever. If this bit is no set in the + * frame (by XmitFrame), this frame has never been sent or is + * already freed. + * The Tx descriptor ring lock must be held while calling this function !!! + * + * Returns: + * none + */ +static void FreeTxDescriptors( +SK_AC *pAC, /* pointer to the adapter context */ +TX_PORT *pTxPort) /* pointer to destination port structure */ +{ +TXD *pTxd; /* pointer to the checked descriptor */ +TXD *pNewTail; /* pointer to 'end' of the ring */ +SK_U32 Control; /* TBControl field of descriptor */ +SK_U64 PhysAddr; /* address of DMA mapping */ + + pNewTail = pTxPort->pTxdRingTail; + pTxd = pNewTail; + /* + ** loop forever; exits if BMU_SW bit not set in start frame + ** or BMU_OWN bit set in any frame + */ + while (1) { + Control = pTxd->TBControl; + if ((Control & BMU_SW) == 0) { + /* + ** software controllable bit is set in first + ** fragment when given to BMU. Not set means that + ** this fragment was never sent or is already + ** freed ( -> ring completely free now). + */ + pTxPort->pTxdRingTail = pTxd; + netif_wake_queue(pAC->dev[pTxPort->PortIndex]); + return; + } + if (Control & BMU_OWN) { + pTxPort->pTxdRingTail = pTxd; + if (pTxPort->TxdRingFree > 0) { + netif_wake_queue(pAC->dev[pTxPort->PortIndex]); + } + return; + } + + /* + ** release the DMA mapping, because until not unmapped + ** this buffer is considered being under control of the + ** adapter card! + */ + PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32; + PhysAddr |= (SK_U64) pTxd->VDataLow; + pci_unmap_page(pAC->PciDev, PhysAddr, + pTxd->pMBuf->len, + PCI_DMA_TODEVICE); + + if (Control & BMU_EOF) + DEV_KFREE_SKB_ANY(pTxd->pMBuf); /* free message */ + + pTxPort->TxdRingFree++; + pTxd->TBControl &= ~BMU_SW; + pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */ + } /* while(forever) */ +} /* FreeTxDescriptors */ + +/***************************************************************************** + * + * FillRxRing - fill the receive ring with valid descriptors + * + * Description: + * This function fills the receive ring descriptors with data + * segments and makes them valid for the BMU. + * The active ring is filled completely, if possible. + * The non-active ring is filled only partial to save memory. + * + * Description of rx ring structure: + * head - points to the descriptor which will be used next by the BMU + * tail - points to the next descriptor to give to the BMU + * + * Returns: N/A + */ +static void FillRxRing( +SK_AC *pAC, /* pointer to the adapter context */ +RX_PORT *pRxPort) /* ptr to port struct for which the ring + should be filled */ +{ +unsigned long Flags; + + spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags); + while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) { + if(!FillRxDescriptor(pAC, pRxPort)) + break; + } + spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags); +} /* FillRxRing */ + + +/***************************************************************************** + * + * FillRxDescriptor - fill one buffer into the receive ring + * + * Description: + * The function allocates a new receive buffer and + * puts it into the next descriptor. + * + * Returns: + * SK_TRUE - a buffer was added to the ring + * SK_FALSE - a buffer could not be added + */ +static SK_BOOL FillRxDescriptor( +SK_AC *pAC, /* pointer to the adapter context struct */ +RX_PORT *pRxPort) /* ptr to port struct of ring to fill */ +{ +struct sk_buff *pMsgBlock; /* pointer to a new message block */ +RXD *pRxd; /* the rxd to fill */ +SK_U16 Length; /* data fragment length */ +SK_U64 PhysAddr; /* physical address of a rx buffer */ + + pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC); + if (pMsgBlock == NULL) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_ENTRY, + ("%s: Allocation of rx buffer failed !\n", + pAC->dev[pRxPort->PortIndex]->name)); + SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex); + return(SK_FALSE); + } + skb_reserve(pMsgBlock, 2); /* to align IP frames */ + /* skb allocated ok, so add buffer */ + pRxd = pRxPort->pRxdRingTail; + pRxPort->pRxdRingTail = pRxd->pNextRxd; + pRxPort->RxdRingFree--; + Length = pAC->RxBufSize; + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + virt_to_page(pMsgBlock->data), + ((unsigned long) pMsgBlock->data & + ~PAGE_MASK), + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + + pRxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + pRxd->pMBuf = pMsgBlock; + pRxd->RBControl = BMU_OWN | + BMU_STF | + BMU_IRQ_EOF | + BMU_TCP_CHECK | + Length; + return (SK_TRUE); + +} /* FillRxDescriptor */ + + +/***************************************************************************** + * + * ReQueueRxBuffer - fill one buffer back into the receive ring + * + * Description: + * Fill a given buffer back into the rx ring. The buffer + * has been previously allocated and aligned, and its phys. + * address calculated, so this is no more necessary. + * + * Returns: N/A + */ +static void ReQueueRxBuffer( +SK_AC *pAC, /* pointer to the adapter context struct */ +RX_PORT *pRxPort, /* ptr to port struct of ring to fill */ +struct sk_buff *pMsg, /* pointer to the buffer */ +SK_U32 PhysHigh, /* phys address high dword */ +SK_U32 PhysLow) /* phys address low dword */ +{ +RXD *pRxd; /* the rxd to fill */ +SK_U16 Length; /* data fragment length */ + + pRxd = pRxPort->pRxdRingTail; + pRxPort->pRxdRingTail = pRxd->pNextRxd; + pRxPort->RxdRingFree--; + Length = pAC->RxBufSize; + + pRxd->VDataLow = PhysLow; + pRxd->VDataHigh = PhysHigh; + pRxd->pMBuf = pMsg; + pRxd->RBControl = BMU_OWN | + BMU_STF | + BMU_IRQ_EOF | + BMU_TCP_CHECK | + Length; + return; +} /* ReQueueRxBuffer */ + +/***************************************************************************** + * + * ReceiveIrq - handle a receive IRQ + * + * Description: + * This function is called when a receive IRQ is set. + * It walks the receive descriptor ring and sends up all + * frames that are complete. + * + * Returns: N/A + */ +static void ReceiveIrq( + SK_AC *pAC, /* pointer to adapter context */ + RX_PORT *pRxPort, /* pointer to receive port struct */ + SK_BOOL SlowPathLock) /* indicates if SlowPathLock is needed */ +{ +RXD *pRxd; /* pointer to receive descriptors */ +SK_U32 Control; /* control field of descriptor */ +struct sk_buff *pMsg; /* pointer to message holding frame */ +struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */ +int FrameLength; /* total length of received frame */ +SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */ +SK_EVPARA EvPara; /* an event parameter union */ +unsigned long Flags; /* for spin lock */ +int PortIndex = pRxPort->PortIndex; +unsigned int Offset; +unsigned int NumBytes; +unsigned int ForRlmt; +SK_BOOL IsBc; +SK_BOOL IsMc; +SK_BOOL IsBadFrame; /* Bad frame */ + +SK_U32 FrameStat; +SK_U64 PhysAddr; + +rx_start: + /* do forever; exit if BMU_OWN found */ + for ( pRxd = pRxPort->pRxdRingHead ; + pRxPort->RxdRingFree < pAC->RxDescrPerRing ; + pRxd = pRxd->pNextRxd, + pRxPort->pRxdRingHead = pRxd, + pRxPort->RxdRingFree ++) { + + /* + * For a better understanding of this loop + * Go through every descriptor beginning at the head + * Please note: the ring might be completely received so the OWN bit + * set is not a good crirteria to leave that loop. + * Therefore the RingFree counter is used. + * On entry of this loop pRxd is a pointer to the Rxd that needs + * to be checked next. + */ + + Control = pRxd->RBControl; + + /* check if this descriptor is ready */ + if ((Control & BMU_OWN) != 0) { + /* this descriptor is not yet ready */ + /* This is the usual end of the loop */ + /* We don't need to start the ring again */ + FillRxRing(pAC, pRxPort); + return; + } + pAC->DynIrqModInfo.NbrProcessedDescr++; + + /* get length of frame and check it */ + FrameLength = Control & BMU_BBC; + if (FrameLength > pAC->RxBufSize) { + goto rx_failed; + } + + /* check for STF and EOF */ + if ((Control & (BMU_STF | BMU_EOF)) != (BMU_STF | BMU_EOF)) { + goto rx_failed; + } + + /* here we have a complete frame in the ring */ + pMsg = pRxd->pMBuf; + + FrameStat = pRxd->FrameStat; + + /* check for frame length mismatch */ +#define XMR_FS_LEN_SHIFT 18 +#define GMR_FS_LEN_SHIFT 16 + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("skge: Frame length mismatch (%u/%u).\n", + FrameLength, + (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT))); + goto rx_failed; + } + } + else { + if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("skge: Frame length mismatch (%u/%u).\n", + FrameLength, + (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT))); + goto rx_failed; + } + } + + /* Set Rx Status */ + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + IsBc = (FrameStat & XMR_FS_BC) != 0; + IsMc = (FrameStat & XMR_FS_MC) != 0; + IsBadFrame = (FrameStat & + (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0; + } else { + IsBc = (FrameStat & GMR_FS_BC) != 0; + IsMc = (FrameStat & GMR_FS_MC) != 0; + IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) || + ((FrameStat & GMR_FS_RX_OK) == 0)); + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0, + ("Received frame of length %d on port %d\n", + FrameLength, PortIndex)); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0, + ("Number of free rx descriptors: %d\n", + pRxPort->RxdRingFree)); +/* DumpMsg(pMsg, "Rx"); */ + + if ((Control & BMU_STAT_VAL) != BMU_STAT_VAL || (IsBadFrame)) { +#if 0 + (FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) { +#endif + /* there is a receive error in this frame */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("skge: Error in received frame, dropped!\n" + "Control: %x\nRxStat: %x\n", + Control, FrameStat)); + + ReQueueRxBuffer(pAC, pRxPort, pMsg, + pRxd->VDataHigh, pRxd->VDataLow); + + continue; + } + + /* + * if short frame then copy data to reduce memory waste + */ + if ((FrameLength < SK_COPY_THRESHOLD) && + ((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) { + /* + * Short frame detected and allocation successfull + */ + /* use new skb and copy data */ + skb_reserve(pNewMsg, 2); + skb_put(pNewMsg, FrameLength); + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + + pci_dma_sync_single_for_cpu(pAC->PciDev, + (dma_addr_t) PhysAddr, + FrameLength, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data(pNewMsg, pMsg, FrameLength); + + pci_dma_sync_single_for_device(pAC->PciDev, + (dma_addr_t) PhysAddr, + FrameLength, + PCI_DMA_FROMDEVICE); + ReQueueRxBuffer(pAC, pRxPort, pMsg, + pRxd->VDataHigh, pRxd->VDataLow); + + pMsg = pNewMsg; + + } + else { + /* + * if large frame, or SKB allocation failed, pass + * the SKB directly to the networking + */ + + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + + /* release the DMA mapping */ + pci_unmap_single(pAC->PciDev, + PhysAddr, + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + + /* set length in message */ + skb_put(pMsg, FrameLength); + } /* frame > SK_COPY_TRESHOLD */ + +#ifdef USE_SK_RX_CHECKSUM + pMsg->csum = pRxd->TcpSums & 0xffff; + pMsg->ip_summed = CHECKSUM_COMPLETE; +#else + pMsg->ip_summed = CHECKSUM_NONE; +#endif + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); + ForRlmt = SK_RLMT_RX_PROTOCOL; +#if 0 + IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC; +#endif + SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength, + IsBc, &Offset, &NumBytes); + if (NumBytes != 0) { +#if 0 + IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC; +#endif + SK_RLMT_LOOKAHEAD(pAC, PortIndex, + &pMsg->data[Offset], + IsBc, IsMc, &ForRlmt); + } + if (ForRlmt == SK_RLMT_RX_PROTOCOL) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("W")); + /* send up only frames from active port */ + if ((PortIndex == pAC->ActivePort) || + (pAC->RlmtNets == 2)) { + /* frame for upper layer */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U")); +#ifdef xDEBUG + DumpMsg(pMsg, "Rx"); +#endif + SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC, + FrameLength, pRxPort->PortIndex); + + pMsg->protocol = eth_type_trans(pMsg, + pAC->dev[pRxPort->PortIndex]); + netif_rx(pMsg); + pAC->dev[pRxPort->PortIndex]->last_rx = jiffies; + } + else { + /* drop frame */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("D")); + DEV_KFREE_SKB(pMsg); + } + + } /* if not for rlmt */ + else { + /* packet for rlmt */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, ("R")); + pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC, + pAC->IoBase, FrameLength); + if (pRlmtMbuf != NULL) { + pRlmtMbuf->pNext = NULL; + pRlmtMbuf->Length = FrameLength; + pRlmtMbuf->PortIdx = PortIndex; + EvPara.pParaPtr = pRlmtMbuf; + memcpy((char*)(pRlmtMbuf->pData), + (char*)(pMsg->data), + FrameLength); + + /* SlowPathLock needed? */ + if (SlowPathLock == SK_TRUE) { + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + SkEventQueue(pAC, SKGE_RLMT, + SK_RLMT_PACKET_RECEIVED, + EvPara); + pAC->CheckQueue = SK_TRUE; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + } else { + SkEventQueue(pAC, SKGE_RLMT, + SK_RLMT_PACKET_RECEIVED, + EvPara); + pAC->CheckQueue = SK_TRUE; + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("Q")); + } + if ((pAC->dev[pRxPort->PortIndex]->flags & + (IFF_PROMISC | IFF_ALLMULTI)) != 0 || + (ForRlmt & SK_RLMT_RX_PROTOCOL) == + SK_RLMT_RX_PROTOCOL) { + pMsg->protocol = eth_type_trans(pMsg, + pAC->dev[pRxPort->PortIndex]); + netif_rx(pMsg); + pAC->dev[pRxPort->PortIndex]->last_rx = jiffies; + } + else { + DEV_KFREE_SKB(pMsg); + } + + } /* if packet for rlmt */ + } /* for ... scanning the RXD ring */ + + /* RXD ring is empty -> fill and restart */ + FillRxRing(pAC, pRxPort); + /* do not start if called from Close */ + if (pAC->BoardLevel > SK_INIT_DATA) { + ClearAndStartRx(pAC, PortIndex); + } + return; + +rx_failed: + /* remove error frame */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR, + ("Schrottdescriptor, length: 0x%x\n", FrameLength)); + + /* release the DMA mapping */ + + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + pci_unmap_page(pAC->PciDev, + PhysAddr, + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + DEV_KFREE_SKB_IRQ(pRxd->pMBuf); + pRxd->pMBuf = NULL; + pRxPort->RxdRingFree++; + pRxPort->pRxdRingHead = pRxd->pNextRxd; + goto rx_start; + +} /* ReceiveIrq */ + + +/***************************************************************************** + * + * ClearAndStartRx - give a start receive command to BMU, clear IRQ + * + * Description: + * This function sends a start command and a clear interrupt + * command for one receive queue to the BMU. + * + * Returns: N/A + * none + */ +static void ClearAndStartRx( +SK_AC *pAC, /* pointer to the adapter context */ +int PortIndex) /* index of the receive port (XMAC) */ +{ + SK_OUT8(pAC->IoBase, + RxQueueAddr[PortIndex]+Q_CSR, + CSR_START | CSR_IRQ_CL_F); +} /* ClearAndStartRx */ + + +/***************************************************************************** + * + * ClearTxIrq - give a clear transmit IRQ command to BMU + * + * Description: + * This function sends a clear tx IRQ command for one + * transmit queue to the BMU. + * + * Returns: N/A + */ +static void ClearTxIrq( +SK_AC *pAC, /* pointer to the adapter context */ +int PortIndex, /* index of the transmit port (XMAC) */ +int Prio) /* priority or normal queue */ +{ + SK_OUT8(pAC->IoBase, + TxQueueAddr[PortIndex][Prio]+Q_CSR, + CSR_IRQ_CL_F); +} /* ClearTxIrq */ + + +/***************************************************************************** + * + * ClearRxRing - remove all buffers from the receive ring + * + * Description: + * This function removes all receive buffers from the ring. + * The receive BMU must be stopped before calling this function. + * + * Returns: N/A + */ +static void ClearRxRing( +SK_AC *pAC, /* pointer to adapter context */ +RX_PORT *pRxPort) /* pointer to rx port struct */ +{ +RXD *pRxd; /* pointer to the current descriptor */ +unsigned long Flags; +SK_U64 PhysAddr; + + if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) { + return; + } + spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags); + pRxd = pRxPort->pRxdRingHead; + do { + if (pRxd->pMBuf != NULL) { + + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + pci_unmap_page(pAC->PciDev, + PhysAddr, + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + DEV_KFREE_SKB(pRxd->pMBuf); + pRxd->pMBuf = NULL; + } + pRxd->RBControl &= BMU_OWN; + pRxd = pRxd->pNextRxd; + pRxPort->RxdRingFree++; + } while (pRxd != pRxPort->pRxdRingTail); + pRxPort->pRxdRingTail = pRxPort->pRxdRingHead; + spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags); +} /* ClearRxRing */ + +/***************************************************************************** + * + * ClearTxRing - remove all buffers from the transmit ring + * + * Description: + * This function removes all transmit buffers from the ring. + * The transmit BMU must be stopped before calling this function + * and transmitting at the upper level must be disabled. + * The BMU own bit of all descriptors is cleared, the rest is + * done by calling FreeTxDescriptors. + * + * Returns: N/A + */ +static void ClearTxRing( +SK_AC *pAC, /* pointer to adapter context */ +TX_PORT *pTxPort) /* pointer to tx prt struct */ +{ +TXD *pTxd; /* pointer to the current descriptor */ +int i; +unsigned long Flags; + + spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); + pTxd = pTxPort->pTxdRingHead; + for (i=0; i<pAC->TxDescrPerRing; i++) { + pTxd->TBControl &= ~BMU_OWN; + pTxd = pTxd->pNextTxd; + } + FreeTxDescriptors(pAC, pTxPort); + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); +} /* ClearTxRing */ + +/***************************************************************************** + * + * SkGeSetMacAddr - Set the hardware MAC address + * + * Description: + * This function sets the MAC address used by the adapter. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p) +{ + +DEV_NET *pNet = netdev_priv(dev); +SK_AC *pAC = pNet->pAC; + +struct sockaddr *addr = p; +unsigned long Flags; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeSetMacAddr starts now...\n")); + if(netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + + if (pAC->RlmtNets == 2) + SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr, + (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); + else + SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort, + (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); + + + + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return 0; +} /* SkGeSetMacAddr */ + + +/***************************************************************************** + * + * SkGeSetRxMode - set receive mode + * + * Description: + * This function sets the receive mode of an adapter. The adapter + * supports promiscuous mode, allmulticast mode and a number of + * multicast addresses. If more multicast addresses the available + * are selected, a hash function in the hardware is used. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static void SkGeSetRxMode(struct SK_NET_DEVICE *dev) +{ + +DEV_NET *pNet; +SK_AC *pAC; + +struct dev_mc_list *pMcList; +int i; +int PortIdx; +unsigned long Flags; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeSetRxMode starts now... ")); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + if (pAC->RlmtNets == 1) + PortIdx = pAC->ActivePort; + else + PortIdx = pNet->NetNr; + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + if (dev->flags & IFF_PROMISC) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("PROMISCUOUS mode\n")); + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_LLC); + } else if (dev->flags & IFF_ALLMULTI) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("ALLMULTI mode\n")); + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_ALL_MC); + } else { + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_NONE); + SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("Number of MC entries: %d ", dev->mc_count)); + + pMcList = dev->mc_list; + for (i=0; i<dev->mc_count; i++, pMcList = pMcList->next) { + SkAddrMcAdd(pAC, pAC->IoBase, PortIdx, + (SK_MAC_ADDR*)pMcList->dmi_addr, 0); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA, + ("%02x:%02x:%02x:%02x:%02x:%02x\n", + pMcList->dmi_addr[0], + pMcList->dmi_addr[1], + pMcList->dmi_addr[2], + pMcList->dmi_addr[3], + pMcList->dmi_addr[4], + pMcList->dmi_addr[5])); + } + SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx); + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + return; +} /* SkGeSetRxMode */ + + +/***************************************************************************** + * + * SkGeChangeMtu - set the MTU to another value + * + * Description: + * This function sets is called whenever the MTU size is changed + * (ifconfig mtu xxx dev ethX). If the MTU is bigger than standard + * ethernet MTU size, long frame support is activated. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu) +{ +DEV_NET *pNet; +struct net_device *pOtherDev; +SK_AC *pAC; +unsigned long Flags; +int i; +SK_EVPARA EvPara; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeChangeMtu starts now...\n")); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) { + return -EINVAL; + } + + if(pAC->BoardLevel != SK_INIT_RUN) { + return -EINVAL; + } + +#ifdef SK_DIAG_SUPPORT + if (pAC->DiagModeActive == DIAG_ACTIVE) { + if (pAC->DiagFlowCtrl == SK_FALSE) { + return -1; /* still in use, deny any actions of MTU */ + } else { + pAC->DiagFlowCtrl = SK_FALSE; + } + } +#endif + + pOtherDev = pAC->dev[1 - pNet->NetNr]; + + if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500) + && (NewMtu <= 1500)) + return 0; + + pAC->RxBufSize = NewMtu + 32; + dev->mtu = NewMtu; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("New MTU: %d\n", NewMtu)); + + /* + ** Prevent any reconfiguration while changing the MTU + ** by disabling any interrupts + */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + + /* + ** Notify RLMT that any ports are to be stopped + */ + EvPara.Para32[0] = 0; + EvPara.Para32[1] = -1; + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + EvPara.Para32[0] = 1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + } else { + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + } + + /* + ** After calling the SkEventDispatcher(), RLMT is aware about + ** the stopped ports -> configuration can take place! + */ + SkEventDispatcher(pAC, pAC->IoBase); + + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + spin_lock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock); + netif_stop_queue(pAC->dev[i]); + + } + + /* + ** Depending on the desired MTU size change, a different number of + ** RX buffers need to be allocated + */ + if (NewMtu > 1500) { + /* + ** Use less rx buffers + */ + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 4); + } else { + if (i == pAC->ActivePort) { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 4); + } else { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 10); + } + } + } + } else { + /* + ** Use the normal amount of rx buffers + */ + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + pAC->RxPort[i].RxFillLimit = 1; + } else { + if (i == pAC->ActivePort) { + pAC->RxPort[i].RxFillLimit = 1; + } else { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 4); + } + } + } + } + + SkGeDeInit(pAC, pAC->IoBase); + + /* + ** enable/disable hardware support for long frames + */ + if (NewMtu > 1500) { +// pAC->JumboActivated = SK_TRUE; /* is never set back !!! */ + pAC->GIni.GIPortUsage = SK_JUMBO_LINK; + } else { + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + pAC->GIni.GIPortUsage = SK_MUL_LINK; + } else { + pAC->GIni.GIPortUsage = SK_RED_LINK; + } + } + + SkGeInit( pAC, pAC->IoBase, SK_INIT_IO); + SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO); + SkEventInit(pAC, pAC->IoBase, SK_INIT_IO); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO); + + /* + ** tschilling: + ** Speed and others are set back to default in level 1 init! + */ + GetConfiguration(pAC); + + SkGeInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkI2cInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkEventInit(pAC, pAC->IoBase, SK_INIT_RUN); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_RUN); + + /* + ** clear and reinit the rx rings here + */ + for (i=0; i<pAC->GIni.GIMacsFound; i++) { + ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE); + ClearRxRing(pAC, &pAC->RxPort[i]); + FillRxRing(pAC, &pAC->RxPort[i]); + + /* + ** Enable transmit descriptor polling + */ + SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE); + FillRxRing(pAC, &pAC->RxPort[i]); + }; + + SkGeYellowLED(pAC, pAC->IoBase, 1); + SkDimEnableModerationIfNeeded(pAC); + SkDimDisplayModerationSettings(pAC); + + netif_start_queue(pAC->dev[pNet->PortNr]); + for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) { + spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock); + } + + /* + ** Enable Interrupts again + */ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK); + + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + + /* + ** Notify RLMT about the changing and restarting one (or more) ports + */ + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + EvPara.Para32[0] = pAC->RlmtNets; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, EvPara); + EvPara.Para32[0] = pNet->PortNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + + if (netif_running(pOtherDev)) { + DEV_NET *pOtherNet = netdev_priv(pOtherDev); + EvPara.Para32[0] = pOtherNet->PortNr; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + } + } else { + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + } + + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + /* + ** While testing this driver with latest kernel 2.5 (2.5.70), it + ** seems as if upper layers have a problem to handle a successful + ** return value of '0'. If such a zero is returned, the complete + ** system hangs for several minutes (!), which is in acceptable. + ** + ** Currently it is not clear, what the exact reason for this problem + ** is. The implemented workaround for 2.5 is to return the desired + ** new MTU size if all needed changes for the new MTU size where + ** performed. In kernels 2.2 and 2.4, a zero value is returned, + ** which indicates the successful change of the mtu-size. + */ + return NewMtu; + +} /* SkGeChangeMtu */ + + +/***************************************************************************** + * + * SkGeStats - return ethernet device statistics + * + * Description: + * This function return statistic data about the ethernet device + * to the operating system. + * + * Returns: + * pointer to the statistic structure. + */ +static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev) +{ +DEV_NET *pNet = netdev_priv(dev); +SK_AC *pAC = pNet->pAC; +SK_PNMI_STRUCT_DATA *pPnmiStruct; /* structure for all Pnmi-Data */ +SK_PNMI_STAT *pPnmiStat; /* pointer to virtual XMAC stat. data */ +SK_PNMI_CONF *pPnmiConf; /* pointer to virtual link config. */ +unsigned int Size; /* size of pnmi struct */ +unsigned long Flags; /* for spin lock */ + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeStats starts now...\n")); + pPnmiStruct = &pAC->PnmiStruct; + +#ifdef SK_DIAG_SUPPORT + if ((pAC->DiagModeActive == DIAG_NOTACTIVE) && + (pAC->BoardLevel == SK_INIT_RUN)) { +#endif + SK_MEMSET(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA)); + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + Size = SK_PNMI_STRUCT_SIZE; + SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); +#ifdef SK_DIAG_SUPPORT + } +#endif + + pPnmiStat = &pPnmiStruct->Stat[0]; + pPnmiConf = &pPnmiStruct->Conf[0]; + + pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF; + pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF; + pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts; + pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts; + + if (dev->mtu <= 1500) { + pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; + } else { + pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - + pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF); + } + + + if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12) + pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts; + + pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF; + pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF; + pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF; + pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF; + pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF; + + /* detailed rx_errors: */ + pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF; + pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF; + pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF; + pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF; + pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF; + pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF; + + /* detailed tx_errors */ + pAC->stats.tx_aborted_errors = (SK_U32) 0; + pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF; + pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF; + pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF; + pAC->stats.tx_window_errors = (SK_U32) 0; + + return(&pAC->stats); +} /* SkGeStats */ + +/* + * Basic MII register access + */ +static int SkGeMiiIoctl(struct net_device *dev, + struct mii_ioctl_data *data, int cmd) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_IOC IoC = pAC->IoBase; + int Port = pNet->PortNr; + SK_GEPORT *pPrt = &pAC->GIni.GP[Port]; + unsigned long Flags; + int err = 0; + int reg = data->reg_num & 0x1f; + SK_U16 val = data->val_in; + + if (!netif_running(dev)) + return -ENODEV; /* Phy still in reset */ + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = pPrt->PhyAddr; + + /* fallthru */ + case SIOCGMIIREG: + if (pAC->GIni.GIGenesis) + SkXmPhyRead(pAC, IoC, Port, reg, &val); + else + SkGmPhyRead(pAC, IoC, Port, reg, &val); + + data->val_out = val; + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + err = -EPERM; + + else if (pAC->GIni.GIGenesis) + SkXmPhyWrite(pAC, IoC, Port, reg, val); + else + SkGmPhyWrite(pAC, IoC, Port, reg, val); + break; + default: + err = -EOPNOTSUPP; + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return err; +} + + +/***************************************************************************** + * + * SkGeIoctl - IO-control function + * + * Description: + * This function is called if an ioctl is issued on the device. + * There are three subfunction for reading, writing and test-writing + * the private MIB data structure (useful for SysKonnect-internal tools). + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd) +{ +DEV_NET *pNet; +SK_AC *pAC; +void *pMemBuf; +struct pci_dev *pdev = NULL; +SK_GE_IOCTL Ioctl; +unsigned int Err = 0; +int Size = 0; +int Ret = 0; +unsigned int Length = 0; +int HeaderLength = sizeof(SK_U32) + sizeof(SK_U32); + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeIoctl starts now...\n")); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + if (cmd == SIOCGMIIPHY || cmd == SIOCSMIIREG || cmd == SIOCGMIIREG) + return SkGeMiiIoctl(dev, if_mii(rq), cmd); + + if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) { + return -EFAULT; + } + + switch(cmd) { + case SK_IOCTL_SETMIB: + case SK_IOCTL_PRESETMIB: + if (!capable(CAP_NET_ADMIN)) return -EPERM; + case SK_IOCTL_GETMIB: + if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData, + Ioctl.Len<sizeof(pAC->PnmiStruct)? + Ioctl.Len : sizeof(pAC->PnmiStruct))) { + return -EFAULT; + } + Size = SkGeIocMib(pNet, Ioctl.Len, cmd); + if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct, + Ioctl.Len<Size? Ioctl.Len : Size)) { + return -EFAULT; + } + Ioctl.Len = Size; + if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { + return -EFAULT; + } + break; + case SK_IOCTL_GEN: + if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) { + Length = Ioctl.Len; + } else { + Length = sizeof(pAC->PnmiStruct) + HeaderLength; + } + if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) { + return -ENOMEM; + } + if(copy_from_user(pMemBuf, Ioctl.pData, Length)) { + Err = -EFAULT; + goto fault_gen; + } + if ((Ret = SkPnmiGenIoctl(pAC, pAC->IoBase, pMemBuf, &Length, 0)) < 0) { + Err = -EFAULT; + goto fault_gen; + } + if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) { + Err = -EFAULT; + goto fault_gen; + } + Ioctl.Len = Length; + if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { + Err = -EFAULT; + goto fault_gen; + } +fault_gen: + kfree(pMemBuf); /* cleanup everything */ + break; +#ifdef SK_DIAG_SUPPORT + case SK_IOCTL_DIAG: + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) { + Length = Ioctl.Len; + } else { + Length = sizeof(pAC->PnmiStruct) + HeaderLength; + } + if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) { + return -ENOMEM; + } + if(copy_from_user(pMemBuf, Ioctl.pData, Length)) { + Err = -EFAULT; + goto fault_diag; + } + pdev = pAC->PciDev; + Length = 3 * sizeof(SK_U32); /* Error, Bus and Device */ + /* + ** While coding this new IOCTL interface, only a few lines of code + ** are to to be added. Therefore no dedicated function has been + ** added. If more functionality is added, a separate function + ** should be used... + */ + * ((SK_U32 *)pMemBuf) = 0; + * ((SK_U32 *)pMemBuf + 1) = pdev->bus->number; + * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev)); + if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) { + Err = -EFAULT; + goto fault_diag; + } + Ioctl.Len = Length; + if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { + Err = -EFAULT; + goto fault_diag; + } +fault_diag: + kfree(pMemBuf); /* cleanup everything */ + break; +#endif + default: + Err = -EOPNOTSUPP; + } + + return(Err); + +} /* SkGeIoctl */ + + +/***************************************************************************** + * + * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message + * + * Description: + * This function reads/writes the MIB data using PNMI (Private Network + * Management Interface). + * The destination for the data must be provided with the + * ioctl call and is given to the driver in the form of + * a user space address. + * Copying from the user-provided data area into kernel messages + * and back is done by copy_from_user and copy_to_user calls in + * SkGeIoctl. + * + * Returns: + * returned size from PNMI call + */ +static int SkGeIocMib( +DEV_NET *pNet, /* pointer to the adapter context */ +unsigned int Size, /* length of ioctl data */ +int mode) /* flag for set/preset */ +{ +unsigned long Flags; /* for spin lock */ +SK_AC *pAC; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeIocMib starts now...\n")); + pAC = pNet->pAC; + /* access MIB */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + switch(mode) { + case SK_IOCTL_GETMIB: + SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, + pNet->NetNr); + break; + case SK_IOCTL_PRESETMIB: + SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, + pNet->NetNr); + break; + case SK_IOCTL_SETMIB: + SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, + pNet->NetNr); + break; + default: + break; + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("MIB data access succeeded\n")); + return (Size); +} /* SkGeIocMib */ + + +/***************************************************************************** + * + * GetConfiguration - read configuration information + * + * Description: + * This function reads per-adapter configuration information from + * the options provided on the command line. + * + * Returns: + * none + */ +static void GetConfiguration( +SK_AC *pAC) /* pointer to the adapter context structure */ +{ +SK_I32 Port; /* preferred port */ +SK_BOOL AutoSet; +SK_BOOL DupSet; +int LinkSpeed = SK_LSPEED_AUTO; /* Link speed */ +int AutoNeg = 1; /* autoneg off (0) or on (1) */ +int DuplexCap = 0; /* 0=both,1=full,2=half */ +int FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; /* FlowControl */ +int MSMode = SK_MS_MODE_AUTO; /* master/slave mode */ + +SK_BOOL IsConTypeDefined = SK_TRUE; +SK_BOOL IsLinkSpeedDefined = SK_TRUE; +SK_BOOL IsFlowCtrlDefined = SK_TRUE; +SK_BOOL IsRoleDefined = SK_TRUE; +SK_BOOL IsModeDefined = SK_TRUE; +/* + * The two parameters AutoNeg. and DuplexCap. map to one configuration + * parameter. The mapping is described by this table: + * DuplexCap -> | both | full | half | + * AutoNeg | | | | + * ----------------------------------------------------------------- + * Off | illegal | Full | Half | + * ----------------------------------------------------------------- + * On | AutoBoth | AutoFull | AutoHalf | + * ----------------------------------------------------------------- + * Sense | AutoSense | AutoSense | AutoSense | + */ +int Capabilities[3][3] = + { { -1, SK_LMODE_FULL , SK_LMODE_HALF }, + {SK_LMODE_AUTOBOTH , SK_LMODE_AUTOFULL , SK_LMODE_AUTOHALF }, + {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} }; + +#define DC_BOTH 0 +#define DC_FULL 1 +#define DC_HALF 2 +#define AN_OFF 0 +#define AN_ON 1 +#define AN_SENS 2 +#define M_CurrPort pAC->GIni.GP[Port] + + + /* + ** Set the default values first for both ports! + */ + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_AUTO; + } + + /* + ** Check merged parameter ConType. If it has not been used, + ** verify any other parameter (e.g. AutoNeg) and use default values. + ** + ** Stating both ConType and other lowlevel link parameters is also + ** possible. If this is the case, the passed ConType-parameter is + ** overwritten by the lowlevel link parameter. + ** + ** The following settings are used for a merged ConType-parameter: + ** + ** ConType DupCap AutoNeg FlowCtrl Role Speed + ** ------- ------ ------- -------- ---------- ----- + ** Auto Both On SymOrRem Auto Auto + ** 100FD Full Off None <ignored> 100 + ** 100HD Half Off None <ignored> 100 + ** 10FD Full Off None <ignored> 10 + ** 10HD Half Off None <ignored> 10 + ** + ** This ConType parameter is used for all ports of the adapter! + */ + if ( (ConType != NULL) && + (pAC->Index < SK_MAX_CARD_PARAM) && + (ConType[pAC->Index] != NULL) ) { + + /* Check chipset family */ + if ((!pAC->ChipsetType) && + (strcmp(ConType[pAC->Index],"Auto")!=0) && + (strcmp(ConType[pAC->Index],"")!=0)) { + /* Set the speed parameter back */ + printk("sk98lin: Illegal value \"%s\" " + "for ConType." + " Using Auto.\n", + ConType[pAC->Index]); + + sprintf(ConType[pAC->Index], "Auto"); + } + + if (strcmp(ConType[pAC->Index],"")==0) { + IsConTypeDefined = SK_FALSE; /* No ConType defined */ + } else if (strcmp(ConType[pAC->Index],"Auto")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_AUTO; + } + } else if (strcmp(ConType[pAC->Index],"100FD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_100MBPS; + } + } else if (strcmp(ConType[pAC->Index],"100HD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_100MBPS; + } + } else if (strcmp(ConType[pAC->Index],"10FD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_10MBPS; + } + } else if (strcmp(ConType[pAC->Index],"10HD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_10MBPS; + } + } else { + printk("sk98lin: Illegal value \"%s\" for ConType\n", + ConType[pAC->Index]); + IsConTypeDefined = SK_FALSE; /* Wrong ConType defined */ + } + } else { + IsConTypeDefined = SK_FALSE; /* No ConType defined */ + } + + /* + ** Parse any parameter settings for port A: + ** a) any LinkSpeed stated? + */ + if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && + Speed_A[pAC->Index] != NULL) { + if (strcmp(Speed_A[pAC->Index],"")==0) { + IsLinkSpeedDefined = SK_FALSE; + } else if (strcmp(Speed_A[pAC->Index],"Auto")==0) { + LinkSpeed = SK_LSPEED_AUTO; + } else if (strcmp(Speed_A[pAC->Index],"10")==0) { + LinkSpeed = SK_LSPEED_10MBPS; + } else if (strcmp(Speed_A[pAC->Index],"100")==0) { + LinkSpeed = SK_LSPEED_100MBPS; + } else if (strcmp(Speed_A[pAC->Index],"1000")==0) { + LinkSpeed = SK_LSPEED_1000MBPS; + } else { + printk("sk98lin: Illegal value \"%s\" for Speed_A\n", + Speed_A[pAC->Index]); + IsLinkSpeedDefined = SK_FALSE; + } + } else { + IsLinkSpeedDefined = SK_FALSE; + } + + /* + ** Check speed parameter: + ** Only copper type adapter and GE V2 cards + */ + if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) && + ((LinkSpeed != SK_LSPEED_AUTO) && + (LinkSpeed != SK_LSPEED_1000MBPS))) { + printk("sk98lin: Illegal value for Speed_A. " + "Not a copper card or GE V2 card\n Using " + "speed 1000\n"); + LinkSpeed = SK_LSPEED_1000MBPS; + } + + /* + ** Decide whether to set new config value if somethig valid has + ** been received. + */ + if (IsLinkSpeedDefined) { + pAC->GIni.GP[0].PLinkSpeed = LinkSpeed; + } + + /* + ** b) Any Autonegotiation and DuplexCapabilities set? + ** Please note that both belong together... + */ + AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */ + AutoSet = SK_FALSE; + if (AutoNeg_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && + AutoNeg_A[pAC->Index] != NULL) { + AutoSet = SK_TRUE; + if (strcmp(AutoNeg_A[pAC->Index],"")==0) { + AutoSet = SK_FALSE; + } else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) { + AutoNeg = AN_ON; + } else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) { + AutoNeg = AN_OFF; + } else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) { + AutoNeg = AN_SENS; + } else { + printk("sk98lin: Illegal value \"%s\" for AutoNeg_A\n", + AutoNeg_A[pAC->Index]); + } + } + + DuplexCap = DC_BOTH; + DupSet = SK_FALSE; + if (DupCap_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && + DupCap_A[pAC->Index] != NULL) { + DupSet = SK_TRUE; + if (strcmp(DupCap_A[pAC->Index],"")==0) { + DupSet = SK_FALSE; + } else if (strcmp(DupCap_A[pAC->Index],"Both")==0) { + DuplexCap = DC_BOTH; + } else if (strcmp(DupCap_A[pAC->Index],"Full")==0) { + DuplexCap = DC_FULL; + } else if (strcmp(DupCap_A[pAC->Index],"Half")==0) { + DuplexCap = DC_HALF; + } else { + printk("sk98lin: Illegal value \"%s\" for DupCap_A\n", + DupCap_A[pAC->Index]); + } + } + + /* + ** Check for illegal combinations + */ + if ((LinkSpeed == SK_LSPEED_1000MBPS) && + ((DuplexCap == SK_LMODE_STAT_AUTOHALF) || + (DuplexCap == SK_LMODE_STAT_HALF)) && + (pAC->ChipsetType)) { + printk("sk98lin: Half Duplex not possible with Gigabit speed!\n" + " Using Full Duplex.\n"); + DuplexCap = DC_FULL; + } + + if ( AutoSet && AutoNeg==AN_SENS && DupSet) { + printk("sk98lin, Port A: DuplexCapabilities" + " ignored using Sense mode\n"); + } + + if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){ + printk("sk98lin: Port A: Illegal combination" + " of values AutoNeg. and DuplexCap.\n Using " + "Full Duplex\n"); + DuplexCap = DC_FULL; + } + + if (AutoSet && AutoNeg==AN_OFF && !DupSet) { + DuplexCap = DC_FULL; + } + + if (!AutoSet && DupSet) { + printk("sk98lin: Port A: Duplex setting not" + " possible in\n default AutoNegotiation mode" + " (Sense).\n Using AutoNegotiation On\n"); + AutoNeg = AN_ON; + } + + /* + ** set the desired mode + */ + if (AutoSet || DupSet) { + pAC->GIni.GP[0].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; + } + + /* + ** c) Any Flowcontrol-parameter set? + */ + if (FlowCtrl_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && + FlowCtrl_A[pAC->Index] != NULL) { + if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) { + IsFlowCtrlDefined = SK_FALSE; + } else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) { + FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; + } else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) { + FlowCtrl = SK_FLOW_MODE_SYMMETRIC; + } else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) { + FlowCtrl = SK_FLOW_MODE_LOC_SEND; + } else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) { + FlowCtrl = SK_FLOW_MODE_NONE; + } else { + printk("sk98lin: Illegal value \"%s\" for FlowCtrl_A\n", + FlowCtrl_A[pAC->Index]); + IsFlowCtrlDefined = SK_FALSE; + } + } else { + IsFlowCtrlDefined = SK_FALSE; + } + + if (IsFlowCtrlDefined) { + if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) { + printk("sk98lin: Port A: FlowControl" + " impossible without AutoNegotiation," + " disabled\n"); + FlowCtrl = SK_FLOW_MODE_NONE; + } + pAC->GIni.GP[0].PFlowCtrlMode = FlowCtrl; + } + + /* + ** d) What is with the RoleParameter? + */ + if (Role_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && + Role_A[pAC->Index] != NULL) { + if (strcmp(Role_A[pAC->Index],"")==0) { + IsRoleDefined = SK_FALSE; + } else if (strcmp(Role_A[pAC->Index],"Auto")==0) { + MSMode = SK_MS_MODE_AUTO; + } else if (strcmp(Role_A[pAC->Index],"Master")==0) { + MSMode = SK_MS_MODE_MASTER; + } else if (strcmp(Role_A[pAC->Index],"Slave")==0) { + MSMode = SK_MS_MODE_SLAVE; + } else { + printk("sk98lin: Illegal value \"%s\" for Role_A\n", + Role_A[pAC->Index]); + IsRoleDefined = SK_FALSE; + } + } else { + IsRoleDefined = SK_FALSE; + } + + if (IsRoleDefined == SK_TRUE) { + pAC->GIni.GP[0].PMSMode = MSMode; + } + + + + /* + ** Parse any parameter settings for port B: + ** a) any LinkSpeed stated? + */ + IsConTypeDefined = SK_TRUE; + IsLinkSpeedDefined = SK_TRUE; + IsFlowCtrlDefined = SK_TRUE; + IsModeDefined = SK_TRUE; + + if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM && + Speed_B[pAC->Index] != NULL) { + if (strcmp(Speed_B[pAC->Index],"")==0) { + IsLinkSpeedDefined = SK_FALSE; + } else if (strcmp(Speed_B[pAC->Index],"Auto")==0) { + LinkSpeed = SK_LSPEED_AUTO; + } else if (strcmp(Speed_B[pAC->Index],"10")==0) { + LinkSpeed = SK_LSPEED_10MBPS; + } else if (strcmp(Speed_B[pAC->Index],"100")==0) { + LinkSpeed = SK_LSPEED_100MBPS; + } else if (strcmp(Speed_B[pAC->Index],"1000")==0) { + LinkSpeed = SK_LSPEED_1000MBPS; + } else { + printk("sk98lin: Illegal value \"%s\" for Speed_B\n", + Speed_B[pAC->Index]); + IsLinkSpeedDefined = SK_FALSE; + } + } else { + IsLinkSpeedDefined = SK_FALSE; + } + + /* + ** Check speed parameter: + ** Only copper type adapter and GE V2 cards + */ + if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) && + ((LinkSpeed != SK_LSPEED_AUTO) && + (LinkSpeed != SK_LSPEED_1000MBPS))) { + printk("sk98lin: Illegal value for Speed_B. " + "Not a copper card or GE V2 card\n Using " + "speed 1000\n"); + LinkSpeed = SK_LSPEED_1000MBPS; + } + + /* + ** Decide whether to set new config value if somethig valid has + ** been received. + */ + if (IsLinkSpeedDefined) { + pAC->GIni.GP[1].PLinkSpeed = LinkSpeed; + } + + /* + ** b) Any Autonegotiation and DuplexCapabilities set? + ** Please note that both belong together... + */ + AutoNeg = AN_SENS; /* default: do auto Sense */ + AutoSet = SK_FALSE; + if (AutoNeg_B != NULL && pAC->Index<SK_MAX_CARD_PARAM && + AutoNeg_B[pAC->Index] != NULL) { + AutoSet = SK_TRUE; + if (strcmp(AutoNeg_B[pAC->Index],"")==0) { + AutoSet = SK_FALSE; + } else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) { + AutoNeg = AN_ON; + } else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) { + AutoNeg = AN_OFF; + } else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) { + AutoNeg = AN_SENS; + } else { + printk("sk98lin: Illegal value \"%s\" for AutoNeg_B\n", + AutoNeg_B[pAC->Index]); + } + } + + DuplexCap = DC_BOTH; + DupSet = SK_FALSE; + if (DupCap_B != NULL && pAC->Index<SK_MAX_CARD_PARAM && + DupCap_B[pAC->Index] != NULL) { + DupSet = SK_TRUE; + if (strcmp(DupCap_B[pAC->Index],"")==0) { + DupSet = SK_FALSE; + } else if (strcmp(DupCap_B[pAC->Index],"Both")==0) { + DuplexCap = DC_BOTH; + } else if (strcmp(DupCap_B[pAC->Index],"Full")==0) { + DuplexCap = DC_FULL; + } else if (strcmp(DupCap_B[pAC->Index],"Half")==0) { + DuplexCap = DC_HALF; + } else { + printk("sk98lin: Illegal value \"%s\" for DupCap_B\n", + DupCap_B[pAC->Index]); + } + } + + + /* + ** Check for illegal combinations + */ + if ((LinkSpeed == SK_LSPEED_1000MBPS) && + ((DuplexCap == SK_LMODE_STAT_AUTOHALF) || + (DuplexCap == SK_LMODE_STAT_HALF)) && + (pAC->ChipsetType)) { + printk("sk98lin: Half Duplex not possible with Gigabit speed!\n" + " Using Full Duplex.\n"); + DuplexCap = DC_FULL; + } + + if (AutoSet && AutoNeg==AN_SENS && DupSet) { + printk("sk98lin, Port B: DuplexCapabilities" + " ignored using Sense mode\n"); + } + + if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){ + printk("sk98lin: Port B: Illegal combination" + " of values AutoNeg. and DuplexCap.\n Using " + "Full Duplex\n"); + DuplexCap = DC_FULL; + } + + if (AutoSet && AutoNeg==AN_OFF && !DupSet) { + DuplexCap = DC_FULL; + } + + if (!AutoSet && DupSet) { + printk("sk98lin: Port B: Duplex setting not" + " possible in\n default AutoNegotiation mode" + " (Sense).\n Using AutoNegotiation On\n"); + AutoNeg = AN_ON; + } + + /* + ** set the desired mode + */ + if (AutoSet || DupSet) { + pAC->GIni.GP[1].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; + } + + /* + ** c) Any FlowCtrl parameter set? + */ + if (FlowCtrl_B != NULL && pAC->Index<SK_MAX_CARD_PARAM && + FlowCtrl_B[pAC->Index] != NULL) { + if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) { + IsFlowCtrlDefined = SK_FALSE; + } else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) { + FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; + } else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) { + FlowCtrl = SK_FLOW_MODE_SYMMETRIC; + } else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) { + FlowCtrl = SK_FLOW_MODE_LOC_SEND; + } else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) { + FlowCtrl = SK_FLOW_MODE_NONE; + } else { + printk("sk98lin: Illegal value \"%s\" for FlowCtrl_B\n", + FlowCtrl_B[pAC->Index]); + IsFlowCtrlDefined = SK_FALSE; + } + } else { + IsFlowCtrlDefined = SK_FALSE; + } + + if (IsFlowCtrlDefined) { + if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) { + printk("sk98lin: Port B: FlowControl" + " impossible without AutoNegotiation," + " disabled\n"); + FlowCtrl = SK_FLOW_MODE_NONE; + } + pAC->GIni.GP[1].PFlowCtrlMode = FlowCtrl; + } + + /* + ** d) What is the RoleParameter? + */ + if (Role_B != NULL && pAC->Index<SK_MAX_CARD_PARAM && + Role_B[pAC->Index] != NULL) { + if (strcmp(Role_B[pAC->Index],"")==0) { + IsRoleDefined = SK_FALSE; + } else if (strcmp(Role_B[pAC->Index],"Auto")==0) { + MSMode = SK_MS_MODE_AUTO; + } else if (strcmp(Role_B[pAC->Index],"Master")==0) { + MSMode = SK_MS_MODE_MASTER; + } else if (strcmp(Role_B[pAC->Index],"Slave")==0) { + MSMode = SK_MS_MODE_SLAVE; + } else { + printk("sk98lin: Illegal value \"%s\" for Role_B\n", + Role_B[pAC->Index]); + IsRoleDefined = SK_FALSE; + } + } else { + IsRoleDefined = SK_FALSE; + } + + if (IsRoleDefined) { + pAC->GIni.GP[1].PMSMode = MSMode; + } + + /* + ** Evaluate settings for both ports + */ + pAC->ActivePort = 0; + if (PrefPort != NULL && pAC->Index<SK_MAX_CARD_PARAM && + PrefPort[pAC->Index] != NULL) { + if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */ + pAC->ActivePort = 0; + pAC->Rlmt.Net[0].Preference = -1; /* auto */ + pAC->Rlmt.Net[0].PrefPort = 0; + } else if (strcmp(PrefPort[pAC->Index],"A") == 0) { + /* + ** do not set ActivePort here, thus a port + ** switch is issued after net up. + */ + Port = 0; + pAC->Rlmt.Net[0].Preference = Port; + pAC->Rlmt.Net[0].PrefPort = Port; + } else if (strcmp(PrefPort[pAC->Index],"B") == 0) { + /* + ** do not set ActivePort here, thus a port + ** switch is issued after net up. + */ + if (pAC->GIni.GIMacsFound == 1) { + printk("sk98lin: Illegal value \"B\" for PrefPort.\n" + " Port B not available on single port adapters.\n"); + + pAC->ActivePort = 0; + pAC->Rlmt.Net[0].Preference = -1; /* auto */ + pAC->Rlmt.Net[0].PrefPort = 0; + } else { + Port = 1; + pAC->Rlmt.Net[0].Preference = Port; + pAC->Rlmt.Net[0].PrefPort = Port; + } + } else { + printk("sk98lin: Illegal value \"%s\" for PrefPort\n", + PrefPort[pAC->Index]); + } + } + + pAC->RlmtNets = 1; + + if (RlmtMode != NULL && pAC->Index<SK_MAX_CARD_PARAM && + RlmtMode[pAC->Index] != NULL) { + if (strcmp(RlmtMode[pAC->Index], "") == 0) { + pAC->RlmtMode = 0; + } else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK; + } else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK | + SK_RLMT_CHECK_LOC_LINK; + } else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK | + SK_RLMT_CHECK_LOC_LINK | + SK_RLMT_CHECK_SEG; + } else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) && + (pAC->GIni.GIMacsFound == 2)) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK; + pAC->RlmtNets = 2; + } else { + printk("sk98lin: Illegal value \"%s\" for" + " RlmtMode, using default\n", + RlmtMode[pAC->Index]); + pAC->RlmtMode = 0; + } + } else { + pAC->RlmtMode = 0; + } + + /* + ** Check the interrupt moderation parameters + */ + if (Moderation[pAC->Index] != NULL) { + if (strcmp(Moderation[pAC->Index], "") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } else if (strcmp(Moderation[pAC->Index], "Static") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_STATIC; + } else if (strcmp(Moderation[pAC->Index], "Dynamic") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_DYNAMIC; + } else if (strcmp(Moderation[pAC->Index], "None") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } else { + printk("sk98lin: Illegal value \"%s\" for Moderation.\n" + " Disable interrupt moderation.\n", + Moderation[pAC->Index]); + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } + } else { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } + + if (Stats[pAC->Index] != NULL) { + if (strcmp(Stats[pAC->Index], "Yes") == 0) { + pAC->DynIrqModInfo.DisplayStats = SK_TRUE; + } else { + pAC->DynIrqModInfo.DisplayStats = SK_FALSE; + } + } else { + pAC->DynIrqModInfo.DisplayStats = SK_FALSE; + } + + if (ModerationMask[pAC->Index] != NULL) { + if (strcmp(ModerationMask[pAC->Index], "Rx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY; + } else if (strcmp(ModerationMask[pAC->Index], "Tx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_ONLY; + } else if (strcmp(ModerationMask[pAC->Index], "Sp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_ONLY; + } else if (strcmp(ModerationMask[pAC->Index], "RxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX; + } else if (strcmp(ModerationMask[pAC->Index], "SpRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX; + } else if (strcmp(ModerationMask[pAC->Index], "RxTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; + } else if (strcmp(ModerationMask[pAC->Index], "TxRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; + } else if (strcmp(ModerationMask[pAC->Index], "TxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX; + } else if (strcmp(ModerationMask[pAC->Index], "SpTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX; + } else if (strcmp(ModerationMask[pAC->Index], "RxTxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "RxSpTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "TxRxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "TxSpRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "SpTxRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "SpRxTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else { /* some rubbish */ + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY; + } + } else { /* operator has stated nothing */ + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; + } + + if (AutoSizing[pAC->Index] != NULL) { + if (strcmp(AutoSizing[pAC->Index], "On") == 0) { + pAC->DynIrqModInfo.AutoSizing = SK_FALSE; + } else { + pAC->DynIrqModInfo.AutoSizing = SK_FALSE; + } + } else { /* operator has stated nothing */ + pAC->DynIrqModInfo.AutoSizing = SK_FALSE; + } + + if (IntsPerSec[pAC->Index] != 0) { + if ((IntsPerSec[pAC->Index]< C_INT_MOD_IPS_LOWER_RANGE) || + (IntsPerSec[pAC->Index] > C_INT_MOD_IPS_UPPER_RANGE)) { + printk("sk98lin: Illegal value \"%d\" for IntsPerSec. (Range: %d - %d)\n" + " Using default value of %i.\n", + IntsPerSec[pAC->Index], + C_INT_MOD_IPS_LOWER_RANGE, + C_INT_MOD_IPS_UPPER_RANGE, + C_INTS_PER_SEC_DEFAULT); + pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT; + } else { + pAC->DynIrqModInfo.MaxModIntsPerSec = IntsPerSec[pAC->Index]; + } + } else { + pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT; + } + + /* + ** Evaluate upper and lower moderation threshold + */ + pAC->DynIrqModInfo.MaxModIntsPerSecUpperLimit = + pAC->DynIrqModInfo.MaxModIntsPerSec + + (pAC->DynIrqModInfo.MaxModIntsPerSec / 2); + + pAC->DynIrqModInfo.MaxModIntsPerSecLowerLimit = + pAC->DynIrqModInfo.MaxModIntsPerSec - + (pAC->DynIrqModInfo.MaxModIntsPerSec / 2); + + pAC->DynIrqModInfo.PrevTimeVal = jiffies; /* initial value */ + + +} /* GetConfiguration */ + + +/***************************************************************************** + * + * ProductStr - return a adapter identification string from vpd + * + * Description: + * This function reads the product name string from the vpd area + * and puts it the field pAC->DeviceString. + * + * Returns: N/A + */ +static inline int ProductStr( + SK_AC *pAC, /* pointer to adapter context */ + char *DeviceStr, /* result string */ + int StrLen /* length of the string */ +) +{ +char Keyword[] = VPD_NAME; /* vpd productname identifier */ +int ReturnCode; /* return code from vpd_read */ +unsigned long Flags; + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + return ReturnCode; +} /* ProductStr */ + +/***************************************************************************** + * + * StartDrvCleanupTimer - Start timer to check for descriptors which + * might be placed in descriptor ring, but + * havent been handled up to now + * + * Description: + * This function requests a HW-timer fo the Yukon card. The actions to + * perform when this timer expires, are located in the SkDrvEvent(). + * + * Returns: N/A + */ +static void +StartDrvCleanupTimer(SK_AC *pAC) { + SK_EVPARA EventParam; /* Event struct for timer event */ + + SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = SK_DRV_RX_CLEANUP_TIMER; + SkTimerStart(pAC, pAC->IoBase, &pAC->DrvCleanupTimer, + SK_DRV_RX_CLEANUP_TIMER_LENGTH, + SKGE_DRV, SK_DRV_TIMER, EventParam); +} + +/***************************************************************************** + * + * StopDrvCleanupTimer - Stop timer to check for descriptors + * + * Description: + * This function requests a HW-timer fo the Yukon card. The actions to + * perform when this timer expires, are located in the SkDrvEvent(). + * + * Returns: N/A + */ +static void +StopDrvCleanupTimer(SK_AC *pAC) { + SkTimerStop(pAC, pAC->IoBase, &pAC->DrvCleanupTimer); + SK_MEMSET((char *) &pAC->DrvCleanupTimer, 0, sizeof(SK_TIMER)); +} + +/****************************************************************************/ +/* functions for common modules *********************************************/ +/****************************************************************************/ + + +/***************************************************************************** + * + * SkDrvAllocRlmtMbuf - allocate an RLMT mbuf + * + * Description: + * This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure + * is embedded into a socket buff data area. + * + * Context: + * runtime + * + * Returns: + * NULL or pointer to Mbuf. + */ +SK_MBUF *SkDrvAllocRlmtMbuf( +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* the IO-context */ +unsigned BufferSize) /* size of the requested buffer */ +{ +SK_MBUF *pRlmtMbuf; /* pointer to a new rlmt-mbuf structure */ +struct sk_buff *pMsgBlock; /* pointer to a new message block */ + + pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC); + if (pMsgBlock == NULL) { + return (NULL); + } + pRlmtMbuf = (SK_MBUF*) pMsgBlock->data; + skb_reserve(pMsgBlock, sizeof(SK_MBUF)); + pRlmtMbuf->pNext = NULL; + pRlmtMbuf->pOs = pMsgBlock; + pRlmtMbuf->pData = pMsgBlock->data; /* Data buffer. */ + pRlmtMbuf->Size = BufferSize; /* Data buffer size. */ + pRlmtMbuf->Length = 0; /* Length of packet (<= Size). */ + return (pRlmtMbuf); + +} /* SkDrvAllocRlmtMbuf */ + + +/***************************************************************************** + * + * SkDrvFreeRlmtMbuf - free an RLMT mbuf + * + * Description: + * This routine frees one or more RLMT mbuf(s). + * + * Context: + * runtime + * + * Returns: + * Nothing + */ +void SkDrvFreeRlmtMbuf( +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* the IO-context */ +SK_MBUF *pMbuf) /* size of the requested buffer */ +{ +SK_MBUF *pFreeMbuf; +SK_MBUF *pNextMbuf; + + pFreeMbuf = pMbuf; + do { + pNextMbuf = pFreeMbuf->pNext; + DEV_KFREE_SKB_ANY(pFreeMbuf->pOs); + pFreeMbuf = pNextMbuf; + } while ( pFreeMbuf != NULL ); +} /* SkDrvFreeRlmtMbuf */ + + +/***************************************************************************** + * + * SkOsGetTime - provide a time value + * + * Description: + * This routine provides a time value. The unit is 1/HZ (defined by Linux). + * It is not used for absolute time, but only for time differences. + * + * + * Returns: + * Time value + */ +SK_U64 SkOsGetTime(SK_AC *pAC) +{ + SK_U64 PrivateJiffies; + SkOsGetTimeCurrent(pAC, &PrivateJiffies); + return PrivateJiffies; +} /* SkOsGetTime */ + + +/***************************************************************************** + * + * SkPciReadCfgDWord - read a 32 bit value from pci config space + * + * Description: + * This routine reads a 32 bit value from the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciReadCfgDWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U32 *pVal) /* pointer to store the read value */ +{ + pci_read_config_dword(pAC->PciDev, PciAddr, pVal); + return(0); +} /* SkPciReadCfgDWord */ + + +/***************************************************************************** + * + * SkPciReadCfgWord - read a 16 bit value from pci config space + * + * Description: + * This routine reads a 16 bit value from the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciReadCfgWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U16 *pVal) /* pointer to store the read value */ +{ + pci_read_config_word(pAC->PciDev, PciAddr, pVal); + return(0); +} /* SkPciReadCfgWord */ + + +/***************************************************************************** + * + * SkPciReadCfgByte - read a 8 bit value from pci config space + * + * Description: + * This routine reads a 8 bit value from the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciReadCfgByte( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U8 *pVal) /* pointer to store the read value */ +{ + pci_read_config_byte(pAC->PciDev, PciAddr, pVal); + return(0); +} /* SkPciReadCfgByte */ + + +/***************************************************************************** + * + * SkPciWriteCfgWord - write a 16 bit value to pci config space + * + * Description: + * This routine writes a 16 bit value to the pci configuration + * space. The flag PciConfigUp indicates whether the config space + * is accesible or must be set up first. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciWriteCfgWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U16 Val) /* pointer to store the read value */ +{ + pci_write_config_word(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgWord */ + + +/***************************************************************************** + * + * SkPciWriteCfgWord - write a 8 bit value to pci config space + * + * Description: + * This routine writes a 8 bit value to the pci configuration + * space. The flag PciConfigUp indicates whether the config space + * is accesible or must be set up first. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciWriteCfgByte( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U8 Val) /* pointer to store the read value */ +{ + pci_write_config_byte(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgByte */ + + +/***************************************************************************** + * + * SkDrvEvent - handle driver events + * + * Description: + * This function handles events from all modules directed to the driver + * + * Context: + * Is called under protection of slow path lock. + * + * Returns: + * 0 if everything ok + * < 0 on error + * + */ +int SkDrvEvent( +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* io-context */ +SK_U32 Event, /* event-id */ +SK_EVPARA Param) /* event-parameter */ +{ +SK_MBUF *pRlmtMbuf; /* pointer to a rlmt-mbuf structure */ +struct sk_buff *pMsg; /* pointer to a message block */ +int FromPort; /* the port from which we switch away */ +int ToPort; /* the port we switch to */ +SK_EVPARA NewPara; /* parameter for further events */ +int Stat; +unsigned long Flags; +SK_BOOL DualNet; + + switch (Event) { + case SK_DRV_ADAP_FAIL: + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("ADAPTER FAIL EVENT\n")); + printk("%s: Adapter failed.\n", pAC->dev[0]->name); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + /* cgoos */ + break; + case SK_DRV_PORT_FAIL: + FromPort = Param.Para32[0]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT FAIL EVENT, Port: %d\n", FromPort)); + if (FromPort == 0) { + printk("%s: Port A failed.\n", pAC->dev[0]->name); + } else { + printk("%s: Port B failed.\n", pAC->dev[1]->name); + } + /* cgoos */ + break; + case SK_DRV_PORT_RESET: /* SK_U32 PortIdx */ + /* action list 4 */ + FromPort = Param.Para32[0]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT RESET EVENT, Port: %d ", FromPort)); + NewPara.Para64 = FromPort; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST); + netif_carrier_off(pAC->dev[Param.Para32[0]]); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + /* clear rx ring from received frames */ + ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); + + ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + /* tschilling: Handling of return value inserted. */ + if (SkGeInitPort(pAC, IoC, FromPort)) { + if (FromPort == 0) { + printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name); + } else { + printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name); + } + } + SkAddrMcUpdate(pAC,IoC, FromPort); + PortReInitBmu(pAC, FromPort); + SkGePollTxD(pAC, IoC, FromPort, SK_TRUE); + ClearAndStartRx(pAC, FromPort); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + break; + case SK_DRV_NET_UP: /* SK_U32 PortIdx */ + { struct net_device *dev = pAC->dev[Param.Para32[0]]; + /* action list 5 */ + FromPort = Param.Para32[0]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("NET UP EVENT, Port: %d ", Param.Para32[0])); + /* Mac update */ + SkAddrMcUpdate(pAC,IoC, FromPort); + + if (DoPrintInterfaceChange) { + printk("%s: network connection up using" + " port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]); + + /* tschilling: Values changed according to LinkSpeedUsed. */ + Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed; + if (Stat == SK_LSPEED_STAT_10MBPS) { + printk(" speed: 10\n"); + } else if (Stat == SK_LSPEED_STAT_100MBPS) { + printk(" speed: 100\n"); + } else if (Stat == SK_LSPEED_STAT_1000MBPS) { + printk(" speed: 1000\n"); + } else { + printk(" speed: unknown\n"); + } + + + Stat = pAC->GIni.GP[FromPort].PLinkModeStatus; + if (Stat == SK_LMODE_STAT_AUTOHALF || + Stat == SK_LMODE_STAT_AUTOFULL) { + printk(" autonegotiation: yes\n"); + } + else { + printk(" autonegotiation: no\n"); + } + if (Stat == SK_LMODE_STAT_AUTOHALF || + Stat == SK_LMODE_STAT_HALF) { + printk(" duplex mode: half\n"); + } + else { + printk(" duplex mode: full\n"); + } + Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus; + if (Stat == SK_FLOW_STAT_REM_SEND ) { + printk(" flowctrl: remote send\n"); + } + else if (Stat == SK_FLOW_STAT_LOC_SEND ){ + printk(" flowctrl: local send\n"); + } + else if (Stat == SK_FLOW_STAT_SYMMETRIC ){ + printk(" flowctrl: symmetric\n"); + } + else { + printk(" flowctrl: none\n"); + } + + /* tschilling: Check against CopperType now. */ + if ((pAC->GIni.GICopperType == SK_TRUE) && + (pAC->GIni.GP[FromPort].PLinkSpeedUsed == + SK_LSPEED_STAT_1000MBPS)) { + Stat = pAC->GIni.GP[FromPort].PMSStatus; + if (Stat == SK_MS_STAT_MASTER ) { + printk(" role: master\n"); + } + else if (Stat == SK_MS_STAT_SLAVE ) { + printk(" role: slave\n"); + } + else { + printk(" role: ???\n"); + } + } + + /* + Display dim (dynamic interrupt moderation) + informations + */ + if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) + printk(" irq moderation: static (%d ints/sec)\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) + printk(" irq moderation: dynamic (%d ints/sec)\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + else + printk(" irq moderation: disabled\n"); + + + printk(" scatter-gather: %s\n", + (dev->features & NETIF_F_SG) ? "enabled" : "disabled"); + printk(" tx-checksum: %s\n", + (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled"); + printk(" rx-checksum: %s\n", + pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled"); + + } else { + DoPrintInterfaceChange = SK_TRUE; + } + + if ((Param.Para32[0] != pAC->ActivePort) && + (pAC->RlmtNets == 1)) { + NewPara.Para32[0] = pAC->ActivePort; + NewPara.Para32[1] = Param.Para32[0]; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN, + NewPara); + } + + /* Inform the world that link protocol is up. */ + netif_carrier_on(dev); + break; + } + case SK_DRV_NET_DOWN: /* SK_U32 Reason */ + /* action list 7 */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("NET DOWN EVENT ")); + if (DoPrintInterfaceChange) { + printk("%s: network connection down\n", + pAC->dev[Param.Para32[1]]->name); + } else { + DoPrintInterfaceChange = SK_TRUE; + } + netif_carrier_off(pAC->dev[Param.Para32[1]]); + break; + case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT SWITCH HARD ")); + case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ + /* action list 6 */ + printk("%s: switching to port %c\n", pAC->dev[0]->name, + 'A'+Param.Para32[1]); + case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ + FromPort = Param.Para32[0]; + ToPort = Param.Para32[1]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT SWITCH EVENT, From: %d To: %d (Pref %d) ", + FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort)); + NewPara.Para64 = FromPort; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); + NewPara.Para64 = ToPort; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST); + SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST); + spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */ + ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */ + + ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); + ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + pAC->ActivePort = ToPort; +#if 0 + SetQueueSizes(pAC); +#else + /* tschilling: New common function with minimum size check. */ + DualNet = SK_FALSE; + if (pAC->RlmtNets == 2) { + DualNet = SK_TRUE; + } + + if (SkGeInitAssignRamToQueues( + pAC, + pAC->ActivePort, + DualNet)) { + spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + printk("SkGeInitAssignRamToQueues failed.\n"); + break; + } +#endif + /* tschilling: Handling of return values inserted. */ + if (SkGeInitPort(pAC, IoC, FromPort) || + SkGeInitPort(pAC, IoC, ToPort)) { + printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name); + } + if (Event == SK_DRV_SWITCH_SOFT) { + SkMacRxTxEnable(pAC, IoC, FromPort); + } + SkMacRxTxEnable(pAC, IoC, ToPort); + SkAddrSwap(pAC, IoC, FromPort, ToPort); + SkAddrMcUpdate(pAC, IoC, FromPort); + SkAddrMcUpdate(pAC, IoC, ToPort); + PortReInitBmu(pAC, FromPort); + PortReInitBmu(pAC, ToPort); + SkGePollTxD(pAC, IoC, FromPort, SK_TRUE); + SkGePollTxD(pAC, IoC, ToPort, SK_TRUE); + ClearAndStartRx(pAC, FromPort); + ClearAndStartRx(pAC, ToPort); + spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + break; + case SK_DRV_RLMT_SEND: /* SK_MBUF *pMb */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("RLS ")); + pRlmtMbuf = (SK_MBUF*) Param.pParaPtr; + pMsg = (struct sk_buff*) pRlmtMbuf->pOs; + skb_put(pMsg, pRlmtMbuf->Length); + if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW], + pMsg) < 0) + + DEV_KFREE_SKB_ANY(pMsg); + break; + case SK_DRV_TIMER: + if (Param.Para32[0] == SK_DRV_MODERATION_TIMER) { + /* + ** expiration of the moderation timer implies that + ** dynamic moderation is to be applied + */ + SkDimStartModerationTimer(pAC); + SkDimModerate(pAC); + if (pAC->DynIrqModInfo.DisplayStats) { + SkDimDisplayModerationSettings(pAC); + } + } else if (Param.Para32[0] == SK_DRV_RX_CLEANUP_TIMER) { + /* + ** check if we need to check for descriptors which + ** haven't been handled the last millisecs + */ + StartDrvCleanupTimer(pAC); + if (pAC->GIni.GIMacsFound == 2) { + ReceiveIrq(pAC, &pAC->RxPort[1], SK_FALSE); + } + ReceiveIrq(pAC, &pAC->RxPort[0], SK_FALSE); + } else { + printk("Expiration of unknown timer\n"); + } + break; + default: + break; + } + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("END EVENT ")); + + return (0); +} /* SkDrvEvent */ + + +/***************************************************************************** + * + * SkErrorLog - log errors + * + * Description: + * This function logs errors to the system buffer and to the console + * + * Returns: + * 0 if everything ok + * < 0 on error + * + */ +void SkErrorLog( +SK_AC *pAC, +int ErrClass, +int ErrNum, +char *pErrorMsg) +{ +char ClassStr[80]; + + switch (ErrClass) { + case SK_ERRCL_OTHER: + strcpy(ClassStr, "Other error"); + break; + case SK_ERRCL_CONFIG: + strcpy(ClassStr, "Configuration error"); + break; + case SK_ERRCL_INIT: + strcpy(ClassStr, "Initialization error"); + break; + case SK_ERRCL_NORES: + strcpy(ClassStr, "Out of resources error"); + break; + case SK_ERRCL_SW: + strcpy(ClassStr, "internal Software error"); + break; + case SK_ERRCL_HW: + strcpy(ClassStr, "Hardware failure"); + break; + case SK_ERRCL_COMM: + strcpy(ClassStr, "Communication error"); + break; + } + printk(KERN_INFO "%s: -- ERROR --\n Class: %s\n" + " Nr: 0x%x\n Msg: %s\n", pAC->dev[0]->name, + ClassStr, ErrNum, pErrorMsg); + +} /* SkErrorLog */ + +#ifdef SK_DIAG_SUPPORT + +/***************************************************************************** + * + * SkDrvEnterDiagMode - handles DIAG attach request + * + * Description: + * Notify the kernel to NOT access the card any longer due to DIAG + * Deinitialize the Card + * + * Returns: + * int + */ +int SkDrvEnterDiagMode( +SK_AC *pAc) /* pointer to adapter context */ +{ + DEV_NET *pNet = netdev_priv(pAc->dev[0]); + SK_AC *pAC = pNet->pAC; + + SK_MEMCPY(&(pAc->PnmiBackup), &(pAc->PnmiStruct), + sizeof(SK_PNMI_STRUCT_DATA)); + + pAC->DiagModeActive = DIAG_ACTIVE; + if (pAC->BoardLevel > SK_INIT_DATA) { + if (netif_running(pAC->dev[0])) { + pAC->WasIfUp[0] = SK_TRUE; + pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */ + } else { + pAC->WasIfUp[0] = SK_FALSE; + } + if (pNet != netdev_priv(pAC->dev[1])) { + pNet = netdev_priv(pAC->dev[1]); + if (netif_running(pAC->dev[1])) { + pAC->WasIfUp[1] = SK_TRUE; + pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 1); /* do SkGeClose */ + } else { + pAC->WasIfUp[1] = SK_FALSE; + } + } + pAC->BoardLevel = SK_INIT_DATA; + } + return(0); +} + +/***************************************************************************** + * + * SkDrvLeaveDiagMode - handles DIAG detach request + * + * Description: + * Notify the kernel to may access the card again after use by DIAG + * Initialize the Card + * + * Returns: + * int + */ +int SkDrvLeaveDiagMode( +SK_AC *pAc) /* pointer to adapter control context */ +{ + SK_MEMCPY(&(pAc->PnmiStruct), &(pAc->PnmiBackup), + sizeof(SK_PNMI_STRUCT_DATA)); + pAc->DiagModeActive = DIAG_NOTACTIVE; + pAc->Pnmi.DiagAttached = SK_DIAG_IDLE; + if (pAc->WasIfUp[0] == SK_TRUE) { + pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAc, 0); /* first device */ + } + if (pAc->WasIfUp[1] == SK_TRUE) { + pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAc, 1); /* second device */ + } + return(0); +} + +/***************************************************************************** + * + * ParseDeviceNbrFromSlotName - Evaluate PCI device number + * + * Description: + * This function parses the PCI slot name information string and will + * retrieve the devcie number out of it. The slot_name maintianed by + * linux is in the form of '02:0a.0', whereas the first two characters + * represent the bus number in hex (in the sample above this is + * pci bus 0x02) and the next two characters the device number (0x0a). + * + * Returns: + * SK_U32: The device number from the PCI slot name + */ + +static SK_U32 ParseDeviceNbrFromSlotName( +const char *SlotName) /* pointer to pci slot name eg. '02:0a.0' */ +{ + char *CurrCharPos = (char *) SlotName; + int FirstNibble = -1; + int SecondNibble = -1; + SK_U32 Result = 0; + + while (*CurrCharPos != '\0') { + if (*CurrCharPos == ':') { + while (*CurrCharPos != '.') { + CurrCharPos++; + if ( (*CurrCharPos >= '0') && + (*CurrCharPos <= '9')) { + if (FirstNibble == -1) { + /* dec. value for '0' */ + FirstNibble = *CurrCharPos - 48; + } else { + SecondNibble = *CurrCharPos - 48; + } + } else if ( (*CurrCharPos >= 'a') && + (*CurrCharPos <= 'f') ) { + if (FirstNibble == -1) { + FirstNibble = *CurrCharPos - 87; + } else { + SecondNibble = *CurrCharPos - 87; + } + } else { + Result = 0; + } + } + + Result = FirstNibble; + Result = Result << 4; /* first nibble is higher one */ + Result = Result | SecondNibble; + } + CurrCharPos++; /* next character */ + } + return (Result); +} + +/**************************************************************************** + * + * SkDrvDeInitAdapter - deinitialize adapter (this function is only + * called if Diag attaches to that card) + * + * Description: + * Close initialized adapter. + * + * Returns: + * 0 - on success + * error code - on error + */ +static int SkDrvDeInitAdapter( +SK_AC *pAC, /* pointer to adapter context */ +int devNbr) /* what device is to be handled */ +{ + struct SK_NET_DEVICE *dev; + + dev = pAC->dev[devNbr]; + + /* On Linux 2.6 the network driver does NOT mess with reference + ** counts. The driver MUST be able to be unloaded at any time + ** due to the possibility of hotplug. + */ + if (SkGeClose(dev) != 0) { + return (-1); + } + return (0); + +} /* SkDrvDeInitAdapter() */ + +/**************************************************************************** + * + * SkDrvInitAdapter - Initialize adapter (this function is only + * called if Diag deattaches from that card) + * + * Description: + * Close initialized adapter. + * + * Returns: + * 0 - on success + * error code - on error + */ +static int SkDrvInitAdapter( +SK_AC *pAC, /* pointer to adapter context */ +int devNbr) /* what device is to be handled */ +{ + struct SK_NET_DEVICE *dev; + + dev = pAC->dev[devNbr]; + + if (SkGeOpen(dev) != 0) { + return (-1); + } + + /* + ** Use correct MTU size and indicate to kernel TX queue can be started + */ + if (SkGeChangeMtu(dev, dev->mtu) != 0) { + return (-1); + } + return (0); + +} /* SkDrvInitAdapter */ + +#endif + +#ifdef DEBUG +/****************************************************************************/ +/* "debug only" section *****************************************************/ +/****************************************************************************/ + + +/***************************************************************************** + * + * DumpMsg - print a frame + * + * Description: + * This function prints frames to the system logfile/to the console. + * + * Returns: N/A + * + */ +static void DumpMsg(struct sk_buff *skb, char *str) +{ + int msglen; + + if (skb == NULL) { + printk("DumpMsg(): NULL-Message\n"); + return; + } + + if (skb->data == NULL) { + printk("DumpMsg(): Message empty\n"); + return; + } + + msglen = skb->len; + if (msglen > 64) + msglen = 64; + + printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len); + + DumpData((char *)skb->data, msglen); + + printk("------- End of message ---------\n"); +} /* DumpMsg */ + + + +/***************************************************************************** + * + * DumpData - print a data area + * + * Description: + * This function prints a area of data to the system logfile/to the + * console. + * + * Returns: N/A + * + */ +static void DumpData(char *p, int size) +{ +register int i; +int haddr, addr; +char hex_buffer[180]; +char asc_buffer[180]; +char HEXCHAR[] = "0123456789ABCDEF"; + + addr = 0; + haddr = 0; + hex_buffer[0] = 0; + asc_buffer[0] = 0; + for (i=0; i < size; ) { + if (*p >= '0' && *p <='z') + asc_buffer[addr] = *p; + else + asc_buffer[addr] = '.'; + addr++; + asc_buffer[addr] = 0; + hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4]; + haddr++; + hex_buffer[haddr] = HEXCHAR[*p & 0x0f]; + haddr++; + hex_buffer[haddr] = ' '; + haddr++; + hex_buffer[haddr] = 0; + p++; + i++; + if (i%16 == 0) { + printk("%s %s\n", hex_buffer, asc_buffer); + addr = 0; + haddr = 0; + } + } +} /* DumpData */ + + +/***************************************************************************** + * + * DumpLong - print a data area as long values + * + * Description: + * This function prints a area of data to the system logfile/to the + * console. + * + * Returns: N/A + * + */ +static void DumpLong(char *pc, int size) +{ +register int i; +int haddr, addr; +char hex_buffer[180]; +char asc_buffer[180]; +char HEXCHAR[] = "0123456789ABCDEF"; +long *p; +int l; + + addr = 0; + haddr = 0; + hex_buffer[0] = 0; + asc_buffer[0] = 0; + p = (long*) pc; + for (i=0; i < size; ) { + l = (long) *p; + hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[l & 0x0f]; + haddr++; + hex_buffer[haddr] = ' '; + haddr++; + hex_buffer[haddr] = 0; + p++; + i++; + if (i%8 == 0) { + printk("%4x %s\n", (i-8)*4, hex_buffer); + haddr = 0; + } + } + printk("------------------------\n"); +} /* DumpLong */ + +#endif + +static int __devinit skge_probe_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + SK_AC *pAC; + DEV_NET *pNet = NULL; + struct net_device *dev = NULL; + static int boards_found = 0; + int error = -ENODEV; + int using_dac = 0; + char DeviceStr[80]; + + if (pci_enable_device(pdev)) + goto out; + + /* Configure DMA attributes. */ + if (sizeof(dma_addr_t) > sizeof(u32) && + !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) { + using_dac = 1; + error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (error < 0) { + printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA " + "for consistent allocations\n", pci_name(pdev)); + goto out_disable_device; + } + } else { + error = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (error) { + printk(KERN_ERR "sk98lin %s no usable DMA configuration\n", + pci_name(pdev)); + goto out_disable_device; + } + } + + error = -ENOMEM; + dev = alloc_etherdev(sizeof(DEV_NET)); + if (!dev) { + printk(KERN_ERR "sk98lin: unable to allocate etherdev " + "structure!\n"); + goto out_disable_device; + } + + pNet = netdev_priv(dev); + pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL); + if (!pNet->pAC) { + printk(KERN_ERR "sk98lin: unable to allocate adapter " + "structure!\n"); + goto out_free_netdev; + } + + pAC = pNet->pAC; + pAC->PciDev = pdev; + + pAC->dev[0] = dev; + pAC->dev[1] = dev; + pAC->CheckQueue = SK_FALSE; + + dev->irq = pdev->irq; + + error = SkGeInitPCI(pAC); + if (error) { + printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error); + goto out_free_netdev; + } + + SET_MODULE_OWNER(dev); + dev->open = &SkGeOpen; + dev->stop = &SkGeClose; + dev->hard_start_xmit = &SkGeXmit; + dev->get_stats = &SkGeStats; + dev->set_multicast_list = &SkGeSetRxMode; + dev->set_mac_address = &SkGeSetMacAddr; + dev->do_ioctl = &SkGeIoctl; + dev->change_mtu = &SkGeChangeMtu; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = &SkGePollController; +#endif + SET_NETDEV_DEV(dev, &pdev->dev); + SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); + + /* Use only if yukon hardware */ + if (pAC->ChipsetType) { +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; +#endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; +#endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[0].RxCsum = 1; +#endif + } + + if (using_dac) + dev->features |= NETIF_F_HIGHDMA; + + pAC->Index = boards_found++; + + error = SkGeBoardInit(dev, pAC); + if (error) + goto out_free_netdev; + + /* Read Adapter name from VPD */ + if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) { + error = -EIO; + printk(KERN_ERR "sk98lin: Could not read VPD data.\n"); + goto out_free_resources; + } + + /* Register net device */ + error = register_netdev(dev); + if (error) { + printk(KERN_ERR "sk98lin: Could not register device.\n"); + goto out_free_resources; + } + + /* Print adapter specific string from vpd */ + printk("%s: %s\n", dev->name, DeviceStr); + + /* Print configuration settings */ + printk(" PrefPort:%c RlmtMode:%s\n", + 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber, + (pAC->RlmtMode==0) ? "Check Link State" : + ((pAC->RlmtMode==1) ? "Check Link State" : + ((pAC->RlmtMode==3) ? "Check Local Port" : + ((pAC->RlmtMode==7) ? "Check Segmentation" : + ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error"))))); + + SkGeYellowLED(pAC, pAC->IoBase, 1); + + memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + pNet->PortNr = 0; + pNet->NetNr = 0; + + boards_found++; + + pci_set_drvdata(pdev, dev); + + /* More then one port found */ + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + dev = alloc_etherdev(sizeof(DEV_NET)); + if (!dev) { + printk(KERN_ERR "sk98lin: unable to allocate etherdev " + "structure!\n"); + goto single_port; + } + + pNet = netdev_priv(dev); + pNet->PortNr = 1; + pNet->NetNr = 1; + pNet->pAC = pAC; + + dev->open = &SkGeOpen; + dev->stop = &SkGeClose; + dev->hard_start_xmit = &SkGeXmit; + dev->get_stats = &SkGeStats; + dev->set_multicast_list = &SkGeSetRxMode; + dev->set_mac_address = &SkGeSetMacAddr; + dev->do_ioctl = &SkGeIoctl; + dev->change_mtu = &SkGeChangeMtu; + SET_NETDEV_DEV(dev, &pdev->dev); + SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); + + if (pAC->ChipsetType) { +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; +#endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; +#endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[1].RxCsum = 1; +#endif + } + + if (using_dac) + dev->features |= NETIF_F_HIGHDMA; + + error = register_netdev(dev); + if (error) { + printk(KERN_ERR "sk98lin: Could not register device" + " for second port. (%d)\n", error); + free_netdev(dev); + goto single_port; + } + + pAC->dev[1] = dev; + memcpy(&dev->dev_addr, + &pAC->Addr.Net[1].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + printk("%s: %s\n", dev->name, DeviceStr); + printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); + } + +single_port: + + /* Save the hardware revision */ + pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) + + (pAC->GIni.GIPciHwRev & 0x0F); + + /* Set driver globals */ + pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME; + pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE; + + memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA)); + memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA)); + + return 0; + + out_free_resources: + FreeResources(dev); + out_free_netdev: + free_netdev(dev); + out_disable_device: + pci_disable_device(pdev); + out: + return error; +} + +static void __devexit skge_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + struct net_device *otherdev = pAC->dev[1]; + + unregister_netdev(dev); + + SkGeYellowLED(pAC, pAC->IoBase, 0); + + if (pAC->BoardLevel == SK_INIT_RUN) { + SK_EVPARA EvPara; + unsigned long Flags; + + /* board is still alive */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + EvPara.Para32[0] = 0; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + EvPara.Para32[0] = 1; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + SkGeDeInit(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + pAC->BoardLevel = SK_INIT_DATA; + /* We do NOT check here, if IRQ was pending, of course*/ + } + + if (pAC->BoardLevel == SK_INIT_IO) { + /* board is still alive */ + SkGeDeInit(pAC, pAC->IoBase); + pAC->BoardLevel = SK_INIT_DATA; + } + + FreeResources(dev); + free_netdev(dev); + if (otherdev != dev) + free_netdev(otherdev); + kfree(pAC); +} + +#ifdef CONFIG_PM +static int skge_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + struct net_device *otherdev = pAC->dev[1]; + + if (netif_running(dev)) { + netif_carrier_off(dev); + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */ + netif_device_detach(dev); + } + if (otherdev != dev) { + if (netif_running(otherdev)) { + netif_carrier_off(otherdev); + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 1); /* performs SkGeClose */ + netif_device_detach(otherdev); + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + if (pAC->AllocFlag & SK_ALLOC_IRQ) { + free_irq(dev->irq, dev); + } + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int skge_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + struct net_device *otherdev = pAC->dev[1]; + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) { + printk(KERN_WARNING "sk98lin: unable to enable device %s " + "in resume\n", dev->name); + goto err_out; + } + pci_set_master(pdev); + if (pAC->GIni.GIMacsFound == 2) + ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev); + else + ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev); + if (ret) { + printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq); + ret = -EBUSY; + goto err_out_disable_pdev; + } + + netif_device_attach(dev); + if (netif_running(dev)) { + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAC, 0); /* first device */ + } + if (otherdev != dev) { + netif_device_attach(otherdev); + if (netif_running(otherdev)) { + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAC, 1); /* second device */ + } + } + + return 0; + +err_out_disable_pdev: + pci_disable_device(pdev); +err_out: + pAC->AllocFlag &= ~SK_ALLOC_IRQ; + dev->irq = 0; + return ret; +} +#else +#define skge_suspend NULL +#define skge_resume NULL +#endif + +static struct pci_device_id skge_pci_tbl[] = { +#ifdef SK98LIN_ALL_DEVICES + { PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif +#ifdef GENESIS + /* Generic SysKonnect SK-98xx Gigabit Ethernet Server Adapter */ + { PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif + /* Generic SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter */ + { PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#ifdef SK98LIN_ALL_DEVICES +/* DLink card does not have valid VPD so this driver gags + * { PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + */ + { PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, }, + { PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, skge_pci_tbl); + +static struct pci_driver skge_driver = { + .name = "sk98lin", + .id_table = skge_pci_tbl, + .probe = skge_probe_one, + .remove = __devexit_p(skge_remove_one), + .suspend = skge_suspend, + .resume = skge_resume, +}; + +static int __init skge_init(void) +{ + printk(KERN_NOTICE "sk98lin: driver has been replaced by the skge driver" + " and is scheduled for removal\n"); + + return pci_register_driver(&skge_driver); +} + +static void __exit skge_exit(void) +{ + pci_unregister_driver(&skge_driver); +} + +module_init(skge_init); +module_exit(skge_exit); diff --git a/drivers/net/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c new file mode 100644 index 00000000000..db670993c2d --- /dev/null +++ b/drivers/net/sk98lin/skgehwt.c @@ -0,0 +1,171 @@ +/****************************************************************************** + * + * Name: skgehwt.c + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.15 $ + * Date: $Date: 2003/09/16 13:41:23 $ + * Purpose: Hardware Timer + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * Event queue and dispatcher + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgehwt.c,v 1.15 2003/09/16 13:41:23 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + * Hardware Timer function queue management. + */ +intro() +{} +#endif + +/* + * Prototypes of local functions. + */ +#define SK_HWT_MAX (65000) + +/* correction factor */ +#define SK_HWT_FAC (1000 * (SK_U32)pAC->GIni.GIHstClkFact / 100) + +/* + * Initialize hardware timer. + * + * Must be called during init level 1. + */ +void SkHwtInit( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + pAC->Hwt.TStart = 0 ; + pAC->Hwt.TStop = 0 ; + pAC->Hwt.TActive = SK_FALSE; + + SkHwtStop(pAC, Ioc); +} + +/* + * + * Start hardware timer (clock ticks are 16us). + * + */ +void SkHwtStart( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +SK_U32 Time) /* Time in units of 16us to load the timer with. */ +{ + SK_U32 Cnt; + + if (Time > SK_HWT_MAX) + Time = SK_HWT_MAX; + + pAC->Hwt.TStart = Time; + pAC->Hwt.TStop = 0L; + + Cnt = Time; + + /* + * if time < 16 us + * time = 16 us + */ + if (!Cnt) { + Cnt++; + } + + SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC); + + SK_OUT16(Ioc, B2_TI_CTRL, TIM_START); /* Start timer. */ + + pAC->Hwt.TActive = SK_TRUE; +} + +/* + * Stop hardware timer. + * and clear the timer IRQ + */ +void SkHwtStop( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + SK_OUT16(Ioc, B2_TI_CTRL, TIM_STOP); + + SK_OUT16(Ioc, B2_TI_CTRL, TIM_CLR_IRQ); + + pAC->Hwt.TActive = SK_FALSE; +} + + +/* + * Stop hardware timer and read time elapsed since last start. + * + * returns + * The elapsed time since last start in units of 16us. + * + */ +SK_U32 SkHwtRead( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + SK_U32 TRead; + SK_U32 IStatus; + + if (pAC->Hwt.TActive) { + + SkHwtStop(pAC, Ioc); + + SK_IN32(Ioc, B2_TI_VAL, &TRead); + TRead /= SK_HWT_FAC; + + SK_IN32(Ioc, B0_ISRC, &IStatus); + + /* Check if timer expired (or wraped around) */ + if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) { + + SkHwtStop(pAC, Ioc); + + pAC->Hwt.TStop = pAC->Hwt.TStart; + } + else { + + pAC->Hwt.TStop = pAC->Hwt.TStart - TRead; + } + } + return(pAC->Hwt.TStop); +} + +/* + * interrupt source= timer + */ +void SkHwtIsr( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + SkHwtStop(pAC, Ioc); + + pAC->Hwt.TStop = pAC->Hwt.TStart; + + SkTimerDone(pAC, Ioc); +} + +/* End of file */ diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c new file mode 100644 index 00000000000..67f1d6a5c15 --- /dev/null +++ b/drivers/net/sk98lin/skgeinit.c @@ -0,0 +1,2005 @@ +/****************************************************************************** + * + * Name: skgeinit.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.97 $ + * Date: $Date: 2003/10/02 16:45:31 $ + * Purpose: Contains functions to initialize the adapter + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* global variables ***********************************************************/ + +/* local variables ************************************************************/ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell."; +#endif + +struct s_QOffTab { + int RxQOff; /* Receive Queue Address Offset */ + int XsQOff; /* Sync Tx Queue Address Offset */ + int XaQOff; /* Async Tx Queue Address Offset */ +}; +static struct s_QOffTab QOffTab[] = { + {Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2} +}; + +struct s_Config { + char ScanString[8]; + SK_U32 Value; +}; + +static struct s_Config OemConfig = { + {'O','E','M','_','C','o','n','f'}, +#ifdef SK_OEM_CONFIG + OEM_CONFIG_VALUE, +#else + 0, +#endif +}; + +/****************************************************************************** + * + * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings + * + * Description: + * Enable or disable the descriptor polling of the transmit descriptor + * ring(s) (TxD) for port 'Port'. + * The new configuration is *not* saved over any SkGeStopPort() and + * SkGeInitPort() calls. + * + * Returns: + * nothing + */ +void SkGePollTxD( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */ +{ + SK_GEPORT *pPrt; + SK_U32 DWord; + + pPrt = &pAC->GIni.GP[Port]; + + DWord = (SK_U32)(PollTxD ? CSR_ENA_POL : CSR_DIS_POL); + + if (pPrt->PXSQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord); + } + + if (pPrt->PXAQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord); + } +} /* SkGePollTxD */ + + +/****************************************************************************** + * + * SkGeYellowLED() - Switch the yellow LED on or off. + * + * Description: + * Switch the yellow LED on or off. + * + * Note: + * This function may be called any time after SkGeInit(Level 1). + * + * Returns: + * nothing + */ +void SkGeYellowLED( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int State) /* yellow LED state, 0 = OFF, 0 != ON */ +{ + if (State == 0) { + /* Switch yellow LED OFF */ + SK_OUT8(IoC, B0_LED, LED_STAT_OFF); + } + else { + /* Switch yellow LED ON */ + SK_OUT8(IoC, B0_LED, LED_STAT_ON); + } +} /* SkGeYellowLED */ + + +#if (!defined(SK_SLIM) || defined(GENESIS)) +/****************************************************************************** + * + * SkGeXmitLED() - Modify the Operational Mode of a transmission LED. + * + * Description: + * The Rx or Tx LED which is specified by 'Led' will be + * enabled, disabled or switched on in test mode. + * + * Note: + * 'Led' must contain the address offset of the LEDs INI register. + * + * Usage: + * SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); + * + * Returns: + * nothing + */ +void SkGeXmitLED( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Led, /* offset to the LED Init Value register */ +int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */ +{ + SK_U32 LedIni; + + switch (Mode) { + case SK_LED_ENA: + LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100; + SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni); + SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START); + break; + case SK_LED_TST: + SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON); + SK_OUT32(IoC, Led + XMIT_LED_CNT, 100); + SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START); + break; + case SK_LED_DIS: + default: + /* + * Do NOT stop the LED Timer here. The LED might be + * in on state. But it needs to go off. + */ + SK_OUT32(IoC, Led + XMIT_LED_CNT, 0); + SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF); + break; + } + + /* + * 1000BT: The Transmit LED is driven by the PHY. + * But the default LED configuration is used for + * Level One and Broadcom PHYs. + * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.) + * (In this case it has to be added here. But we will see. XXX) + */ +} /* SkGeXmitLED */ +#endif /* !SK_SLIM || GENESIS */ + + +/****************************************************************************** + * + * DoCalcAddr() - Calculates the start and the end address of a queue. + * + * Description: + * This function calculates the start and the end address of a queue. + * Afterwards the 'StartVal' is incremented to the next start position. + * If the port is already initialized the calculated values + * will be checked against the configured values and an + * error will be returned, if they are not equal. + * If the port is not initialized the values will be written to + * *StartAdr and *EndAddr. + * + * Returns: + * 0: success + * 1: configuration error + */ +static int DoCalcAddr( +SK_AC *pAC, /* adapter context */ +SK_GEPORT SK_FAR *pPrt, /* port index */ +int QuSize, /* size of the queue to configure in kB */ +SK_U32 SK_FAR *StartVal, /* start value for address calculation */ +SK_U32 SK_FAR *QuStartAddr,/* start addr to calculate */ +SK_U32 SK_FAR *QuEndAddr) /* end address to calculate */ +{ + SK_U32 EndVal; + SK_U32 NextStart; + int Rtv; + + Rtv = 0; + if (QuSize == 0) { + EndVal = *StartVal; + NextStart = EndVal; + } + else { + EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1; + NextStart = EndVal + 1; + } + + if (pPrt->PState >= SK_PRT_INIT) { + if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) { + Rtv = 1; + } + } + else { + *QuStartAddr = *StartVal; + *QuEndAddr = EndVal; + } + + *StartVal = NextStart; + return(Rtv); +} /* DoCalcAddr */ + +/****************************************************************************** + * + * SkGeInitAssignRamToQueues() - allocate default queue sizes + * + * Description: + * This function assigns the memory to the different queues and ports. + * When DualNet is set to SK_TRUE all ports get the same amount of memory. + * Otherwise the first port gets most of the memory and all the + * other ports just the required minimum. + * This function can only be called when pAC->GIni.GIRamSize and + * pAC->GIni.GIMacsFound have been initialized, usually this happens + * at init level 1 + * + * Returns: + * 0 - ok + * 1 - invalid input values + * 2 - not enough memory + */ + +int SkGeInitAssignRamToQueues( +SK_AC *pAC, /* Adapter context */ +int ActivePort, /* Active Port in RLMT mode */ +SK_BOOL DualNet) /* adapter context */ +{ + int i; + int UsedKilobytes; /* memory already assigned */ + int ActivePortKilobytes; /* memory available for active port */ + SK_GEPORT *pGePort; + + UsedKilobytes = 0; + + if (ActivePort >= pAC->GIni.GIMacsFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n", + ActivePort)); + return(1); + } + if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) + + ((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("SkGeInitAssignRamToQueues: Not enough memory (%d)\n", + pAC->GIni.GIRamSize)); + return(2); + } + + if (DualNet) { + /* every port gets the same amount of memory */ + ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound; + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + pGePort = &pAC->GIni.GP[i]; + + /* take away the minimum memory for active queues */ + ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); + + /* receive queue gets the minimum + 80% of the rest */ + pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB(( + ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100)) + + SK_MIN_RXQ_SIZE; + + ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE); + + /* synchronous transmit queue */ + pGePort->PXSQSize = 0; + + /* asynchronous transmit queue */ + pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes + + SK_MIN_TXQ_SIZE); + } + } + else { + /* Rlmt Mode or single link adapter */ + + /* Set standby queue size defaults for all standby ports */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + if (i != ActivePort) { + pGePort = &pAC->GIni.GP[i]; + + pGePort->PRxQSize = SK_MIN_RXQ_SIZE; + pGePort->PXAQSize = SK_MIN_TXQ_SIZE; + pGePort->PXSQSize = 0; + + /* Count used RAM */ + UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize; + } + } + /* what's left? */ + ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes; + + /* assign it to the active port */ + /* first take away the minimum memory */ + ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); + pGePort = &pAC->GIni.GP[ActivePort]; + + /* receive queue get's the minimum + 80% of the rest */ + pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes * + (unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE; + + ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE); + + /* synchronous transmit queue */ + pGePort->PXSQSize = 0; + + /* asynchronous transmit queue */ + pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) + + SK_MIN_TXQ_SIZE; + } +#ifdef VCPU + VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n", + pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize); +#endif /* VCPU */ + + return(0); +} /* SkGeInitAssignRamToQueues */ + +/****************************************************************************** + * + * SkGeCheckQSize() - Checks the Adapters Queue Size Configuration + * + * Description: + * This function verifies the Queue Size Configuration specified + * in the variables PRxQSize, PXSQSize, and PXAQSize of all + * used ports. + * This requirements must be fullfilled to have a valid configuration: + * - The size of all queues must not exceed GIRamSize. + * - The queue sizes must be specified in units of 8 kB. + * - The size of Rx queues of available ports must not be + * smaller than 16 kB. + * - The size of at least one Tx queue (synch. or asynch.) + * of available ports must not be smaller than 16 kB + * when Jumbo Frames are used. + * - The RAM start and end addresses must not be changed + * for ports which are already initialized. + * Furthermore SkGeCheckQSize() defines the Start and End Addresses + * of all ports and stores them into the HWAC port structure. + * + * Returns: + * 0: Queue Size Configuration valid + * 1: Queue Size Configuration invalid + */ +static int SkGeCheckQSize( +SK_AC *pAC, /* adapter context */ +int Port) /* port index */ +{ + SK_GEPORT *pPrt; + int i; + int Rtv; + int Rtv2; + SK_U32 StartAddr; +#ifndef SK_SLIM + int UsedMem; /* total memory used (max. found ports) */ +#endif + + Rtv = 0; + +#ifndef SK_SLIM + + UsedMem = 0; + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + pPrt = &pAC->GIni.GP[i]; + + if ((pPrt->PRxQSize & QZ_UNITS) != 0 || + (pPrt->PXSQSize & QZ_UNITS) != 0 || + (pPrt->PXAQSize & QZ_UNITS) != 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); + return(1); + } + + if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG); + return(1); + } + + /* + * the size of at least one Tx queue (synch. or asynch.) has to be > 0. + * if Jumbo Frames are used, this size has to be >= 16 kB. + */ + if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) || + (pAC->GIni.GIPortUsage == SK_JUMBO_LINK && + ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) || + (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG); + return(1); + } + + UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize; + } + + if (UsedMem > pAC->GIni.GIRamSize) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); + return(1); + } +#endif /* !SK_SLIM */ + + /* Now start address calculation */ + StartAddr = pAC->GIni.GIRamOffs; + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + pPrt = &pAC->GIni.GP[i]; + + /* Calculate/Check values for the receive queue */ + Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr, + &pPrt->PRxQRamStart, &pPrt->PRxQRamEnd); + Rtv |= Rtv2; + + /* Calculate/Check values for the synchronous Tx queue */ + Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr, + &pPrt->PXsQRamStart, &pPrt->PXsQRamEnd); + Rtv |= Rtv2; + + /* Calculate/Check values for the asynchronous Tx queue */ + Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr, + &pPrt->PXaQRamStart, &pPrt->PXaQRamEnd); + Rtv |= Rtv2; + + if (Rtv) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG); + return(1); + } + } + + return(0); +} /* SkGeCheckQSize */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGeInitMacArb() - Initialize the MAC Arbiter + * + * Description: + * This function initializes the MAC Arbiter. + * It must not be called if there is still an + * initialized or active port. + * + * Returns: + * nothing + */ +static void SkGeInitMacArb( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + /* release local reset */ + SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR); + + /* configure timeout values */ + SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53); + SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53); + SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53); + SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53); + + SK_OUT8(IoC, B3_MA_RCINI_RX1, 0); + SK_OUT8(IoC, B3_MA_RCINI_RX2, 0); + SK_OUT8(IoC, B3_MA_RCINI_TX1, 0); + SK_OUT8(IoC, B3_MA_RCINI_TX2, 0); + + /* recovery values are needed for XMAC II Rev. B2 only */ + /* Fast Output Enable Mode was intended to use with Rev. B2, but now? */ + + /* + * There is no start or enable button to push, therefore + * the MAC arbiter is configured and enabled now. + */ +} /* SkGeInitMacArb */ + + +/****************************************************************************** + * + * SkGeInitPktArb() - Initialize the Packet Arbiter + * + * Description: + * This function initializes the Packet Arbiter. + * It must not be called if there is still an + * initialized or active port. + * + * Returns: + * nothing + */ +static void SkGeInitPktArb( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + /* release local reset */ + SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR); + + /* configure timeout values */ + SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX); + SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX); + SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX); + SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX); + + /* + * enable timeout timers if jumbo frames not used + * NOTE: the packet arbiter timeout interrupt is needed for + * half duplex hangup workaround + */ + if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) { + if (pAC->GIni.GIMacsFound == 1) { + SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1); + } + else { + SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2); + } + } +} /* SkGeInitPktArb */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkGeInitMacFifo() - Initialize the MAC FIFOs + * + * Description: + * Initialize all MAC FIFOs of the specified port + * + * Returns: + * nothing + */ +static void SkGeInitMacFifo( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 Word; +#ifdef VCPU + SK_U32 DWord; +#endif /* VCPU */ + /* + * For each FIFO: + * - release local reset + * - use default value for MAC FIFO size + * - setup defaults for the control register + * - enable the FIFO + */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Configure Rx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF); + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD); + + /* Configure Tx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); + SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD); + + /* Enable frame flushing if jumbo frames used */ + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* set Rx GMAC FIFO Flush Mask */ + SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK); + + Word = (SK_U16)GMF_RX_CTRL_DEF; + + /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */ + if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) { + + Word &= ~GMF_RX_F_FL_ON; + } + + /* Configure Rx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word); + + /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */ + SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + + /* Configure Tx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF); + +#ifdef VCPU + SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord); + SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord); +#endif /* VCPU */ + + /* set Tx GMAC FIFO Almost Empty Threshold */ +/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */ + } +#endif /* YUKON */ + +} /* SkGeInitMacFifo */ + +#ifdef SK_LNK_SYNC_CNT +/****************************************************************************** + * + * SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting + * + * Description: + * This function starts the Link Sync Counter of the specified + * port and enables the generation of an Link Sync IRQ. + * The Link Sync Counter may be used to detect an active link, + * if autonegotiation is not used. + * + * Note: + * o To ensure receiving the Link Sync Event the LinkSyncCounter + * should be initialized BEFORE clearing the XMAC's reset! + * o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this + * function. + * + * Returns: + * nothing + */ +void SkGeLoadLnkSyncCnt( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U32 CntVal) /* Counter value */ +{ + SK_U32 OrgIMsk; + SK_U32 NewIMsk; + SK_U32 ISrc; + SK_BOOL IrqPend; + + /* stop counter */ + SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP); + + /* + * ASIC problem: + * Each time starting the Link Sync Counter an IRQ is generated + * by the adapter. See problem report entry from 21.07.98 + * + * Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ + * if no IRQ is already pending. + */ + IrqPend = SK_FALSE; + SK_IN32(IoC, B0_ISRC, &ISrc); + SK_IN32(IoC, B0_IMSK, &OrgIMsk); + if (Port == MAC_1) { + NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1; + if ((ISrc & IS_LNK_SYNC_M1) != 0) { + IrqPend = SK_TRUE; + } + } + else { + NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2; + if ((ISrc & IS_LNK_SYNC_M2) != 0) { + IrqPend = SK_TRUE; + } + } + if (!IrqPend) { + SK_OUT32(IoC, B0_IMSK, NewIMsk); + } + + /* load counter */ + SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal); + + /* start counter */ + SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START); + + if (!IrqPend) { + /* clear the unexpected IRQ, and restore the interrupt mask */ + SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ); + SK_OUT32(IoC, B0_IMSK, OrgIMsk); + } +} /* SkGeLoadLnkSyncCnt*/ +#endif /* SK_LNK_SYNC_CNT */ + +#if defined(SK_DIAG) || defined(SK_CFG_SYNC) +/****************************************************************************** + * + * SkGeCfgSync() - Configure synchronous bandwidth for this port. + * + * Description: + * This function may be used to configure synchronous bandwidth + * to the specified port. This may be done any time after + * initializing the port. The configuration values are NOT saved + * in the HWAC port structure and will be overwritten any + * time when stopping and starting the port. + * Any values for the synchronous configuration will be ignored + * if the size of the synchronous queue is zero! + * + * The default configuration for the synchronous service is + * TXA_ENA_FSYNC. This means if the size of + * the synchronous queue is unequal zero but no specific + * synchronous bandwidth is configured, the synchronous queue + * will always have the 'unlimited' transmit priority! + * + * This mode will be restored if the synchronous bandwidth is + * deallocated ('IntTime' = 0 and 'LimCount' = 0). + * + * Returns: + * 0: success + * 1: parameter configuration error + * 2: try to configure quality of service although no + * synchronous queue is configured + */ +int SkGeCfgSync( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U32 IntTime, /* Interval Timer Value in units of 8ns */ +SK_U32 LimCount, /* Number of bytes to transfer during IntTime */ +int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */ +{ + int Rtv; + + Rtv = 0; + + /* check the parameters */ + if (LimCount > IntTime || + (LimCount == 0 && IntTime != 0) || + (LimCount != 0 && IntTime == 0)) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); + return(1); + } + + if (pAC->GIni.GP[Port].PXSQSize == 0) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG); + return(2); + } + + /* calculate register values */ + IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100; + LimCount = LimCount / 8; + + if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); + return(1); + } + + /* + * - Enable 'Force Sync' to ensure the synchronous queue + * has the priority while configuring the new values. + * - Also 'disable alloc' to ensure the settings complies + * to the SyncMode parameter. + * - Disable 'Rate Control' to configure the new values. + * - write IntTime and LimCount + * - start 'Rate Control' and disable 'Force Sync' + * if Interval Timer or Limit Counter not zero. + */ + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), + TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime); + SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount); + + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), + (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC))); + + if (IntTime != 0 || LimCount != 0) { + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC); + } + + return(0); +} /* SkGeCfgSync */ +#endif /* SK_DIAG || SK_CFG_SYNC*/ + + +/****************************************************************************** + * + * DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue + * + * Desccription: + * If the queue is used, enable and initialize it. + * Make sure the queue is still reset, if it is not used. + * + * Returns: + * nothing + */ +static void DoInitRamQueue( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int QuIoOffs, /* Queue IO Address Offset */ +SK_U32 QuStartAddr, /* Queue Start Address */ +SK_U32 QuEndAddr, /* Queue End Address */ +int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */ +{ + SK_U32 RxUpThresVal; + SK_U32 RxLoThresVal; + + if (QuStartAddr != QuEndAddr) { + /* calculate thresholds, assume we have a big Rx queue */ + RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8; + RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8; + + /* build HW address format */ + QuStartAddr = QuStartAddr / 8; + QuEndAddr = QuEndAddr / 8; + + /* release local reset */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR); + + /* configure addresses */ + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr); + + switch (QuType) { + case SK_RX_SRAM_Q: + /* configure threshold for small Rx Queue */ + RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8; + + /* continue with SK_RX_BRAM_Q */ + case SK_RX_BRAM_Q: + /* write threshold for Rx Queue */ + + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal); + + /* the high priority threshold not used */ + break; + case SK_TX_RAM_Q: + /* + * Do NOT use Store & Forward under normal operation due to + * performance optimization (GENESIS only). + * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB) + * or YUKON is used ((GMAC Tx FIFO is only 1 kB) + * we NEED Store & Forward of the RAM buffer. + */ + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK || + pAC->GIni.GIYukon) { + /* enable Store & Forward Mode for the Tx Side */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD); + } + break; + } + + /* set queue operational */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD); + } + else { + /* ensure the queue is still disabled */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET); + } +} /* DoInitRamQueue */ + + +/****************************************************************************** + * + * SkGeInitRamBufs() - Initialize the RAM Buffer Queues + * + * Description: + * Initialize all RAM Buffer Queues of the specified port + * + * Returns: + * nothing + */ +static void SkGeInitRamBufs( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int RxQType; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) { + RxQType = SK_RX_SRAM_Q; /* small Rx Queue */ + } + else { + RxQType = SK_RX_BRAM_Q; /* big Rx Queue */ + } + + DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart, + pPrt->PRxQRamEnd, RxQType); + + DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart, + pPrt->PXsQRamEnd, SK_TX_RAM_Q); + + DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart, + pPrt->PXaQRamEnd, SK_TX_RAM_Q); + +} /* SkGeInitRamBufs */ + + +/****************************************************************************** + * + * SkGeInitRamIface() - Initialize the RAM Interface + * + * Description: + * This function initializes the Adapters RAM Interface. + * + * Note: + * This function is used in the diagnostics. + * + * Returns: + * nothing + */ +static void SkGeInitRamIface( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + /* release local reset */ + SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR); + + /* configure timeout values */ + SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53); + +} /* SkGeInitRamIface */ + + +/****************************************************************************** + * + * SkGeInitBmu() - Initialize the BMU state machines + * + * Description: + * Initialize all BMU state machines of the specified port + * + * Returns: + * nothing + */ +static void SkGeInitBmu( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U32 RxWm; + SK_U32 TxWm; + + pPrt = &pAC->GIni.GP[Port]; + + RxWm = SK_BMU_RX_WM; + TxWm = SK_BMU_TX_WM; + + if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) { + /* for better performance */ + RxWm /= 2; + TxWm /= 2; + } + + /* Rx Queue: Release all local resets and set the watermark */ + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET); + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm); + + /* + * Tx Queue: Release all local resets if the queue is used ! + * set watermark + */ + if (pPrt->PXSQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET); + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm); + } + + if (pPrt->PXAQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET); + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm); + } + /* + * Do NOT enable the descriptor poll timers here, because + * the descriptor addresses are not specified yet. + */ +} /* SkGeInitBmu */ + + +/****************************************************************************** + * + * TestStopBit() - Test the stop bit of the queue + * + * Description: + * Stopping a queue is not as simple as it seems to be. + * If descriptor polling is enabled, it may happen + * that RX/TX stop is done and SV idle is NOT set. + * In this case we have to issue another stop command. + * + * Returns: + * The queues control status register + */ +static SK_U32 TestStopBit( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int QuIoOffs) /* Queue IO Address Offset */ +{ + SK_U32 QuCsr; /* CSR contents */ + + SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); + + if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) { + /* Stop Descriptor overridden by start command */ + SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP); + + SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); + } + + return(QuCsr); +} /* TestStopBit */ + + +/****************************************************************************** + * + * SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'. + * + * Description: + * After calling this function the descriptor rings and Rx and Tx + * queues of this port may be reconfigured. + * + * It is possible to stop the receive and transmit path separate or + * both together. + * + * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC. + * The receive queue is still active and + * the pending Rx frames may be still transferred + * into the RxD. + * SK_STOP_RX Stop the receive path. The tansmit path + * has to be stopped once before. + * SK_STOP_ALL SK_STOP_TX + SK_STOP_RX + * + * RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive. + * SK_HARD_RST Resets the MAC and the PHY. + * + * Example: + * 1) A Link Down event was signaled for a port. Therefore the activity + * of this port should be stopped and a hardware reset should be issued + * to enable the workaround of XMAC Errata #2. But the received frames + * should not be discarded. + * ... + * SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST); + * (transfer all pending Rx frames) + * SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST); + * ... + * + * 2) An event was issued which request the driver to switch + * the 'virtual active' link to an other already active port + * as soon as possible. The frames in the receive queue of this + * port may be lost. But the PHY must not be reset during this + * event. + * ... + * SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST); + * ... + * + * Extended Description: + * If SK_STOP_TX is set, + * o disable the MAC's receive and transmitter to prevent + * from sending incomplete frames + * o stop the port's transmit queues before terminating the + * BMUs to prevent from performing incomplete PCI cycles + * on the PCI bus + * - The network Rx and Tx activity and PCI Tx transfer is + * disabled now. + * o reset the MAC depending on the RstMode + * o Stop Interval Timer and Limit Counter of Tx Arbiter, + * also disable Force Sync bit and Enable Alloc bit. + * o perform a local reset of the port's Tx path + * - reset the PCI FIFO of the async Tx queue + * - reset the PCI FIFO of the sync Tx queue + * - reset the RAM Buffer async Tx queue + * - reset the RAM Buffer sync Tx queue + * - reset the MAC Tx FIFO + * o switch Link and Tx LED off, stop the LED counters + * + * If SK_STOP_RX is set, + * o stop the port's receive queue + * - The path data transfer activity is fully stopped now. + * o perform a local reset of the port's Rx path + * - reset the PCI FIFO of the Rx queue + * - reset the RAM Buffer receive queue + * - reset the MAC Rx FIFO + * o switch Rx LED off, stop the LED counter + * + * If all ports are stopped, + * o reset the RAM Interface. + * + * Notes: + * o This function may be called during the driver states RESET_PORT and + * SWITCH_PORT. + */ +void SkGeStopPort( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +int Port, /* port to stop (MAC_1 + n) */ +int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */ +int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ +{ +#ifndef SK_DIAG + SK_EVPARA Para; +#endif /* !SK_DIAG */ + SK_GEPORT *pPrt; + SK_U32 DWord; + SK_U32 XsCsr; + SK_U32 XaCsr; + SK_U64 ToutStart; + int i; + int ToutCnt; + + pPrt = &pAC->GIni.GP[Port]; + + if ((Dir & SK_STOP_TX) != 0) { + /* disable receiver and transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + + /* stop both transmit queues */ + /* + * If the BMU is in the reset state CSR_STOP will terminate + * immediately. + */ + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP); + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP); + + ToutStart = SkOsGetTime(pAC); + ToutCnt = 0; + do { + /* + * Clear packet arbiter timeout to make sure + * this loop will terminate. + */ + SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ? + PA_CLR_TO_TX1 : PA_CLR_TO_TX2)); + + /* + * If the transfer stucks at the MAC the STOP command will not + * terminate if we don't flush the XMAC's transmit FIFO ! + */ + SkMacFlushTxFifo(pAC, IoC, Port); + + XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff); + XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff); + + if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) { + /* + * Timeout of 1/18 second reached. + * This needs to be checked at 1/18 sec only. + */ + ToutCnt++; + if (ToutCnt > 1) { + /* Might be a problem when the driver event handler + * calls StopPort again. XXX. + */ + + /* Fatal Error, Loop aborted */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018, + SKERR_HWI_E018MSG); +#ifndef SK_DIAG + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); +#endif /* !SK_DIAG */ + return; + } + /* + * Cache incoherency workaround: Assume a start command + * has been lost while sending the frame. + */ + ToutStart = SkOsGetTime(pAC); + + if ((XsCsr & CSR_STOP) != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START); + } + if ((XaCsr & CSR_STOP) != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START); + } + } + + /* + * Because of the ASIC problem report entry from 21.08.1998 it is + * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set. + */ + } while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE || + (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE); + + /* Reset the MAC depending on the RstMode */ + if (RstMode == SK_SOFT_RST) { + SkMacSoftRst(pAC, IoC, Port); + } + else { + SkMacHardRst(pAC, IoC, Port); + } + + /* Disable Force Sync bit and Enable Alloc bit */ + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), + TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ + SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L); + SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L); + + /* Perform a local reset of the port's Tx path */ + + /* Reset the PCI FIFO of the async Tx queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET); + /* Reset the PCI FIFO of the sync Tx queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET); + /* Reset the RAM Buffer async Tx queue */ + SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET); + /* Reset the RAM Buffer sync Tx queue */ + SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET); + + /* Reset Tx MAC FIFO */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Note: MFF_RST_SET does NOT reset the XMAC ! */ + SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET); + + /* switch Link and Tx LED off, stop the LED counters */ + /* Link LED is switched off by the RLMT and the Diag itself */ + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Reset TX MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET); + } +#endif /* YUKON */ + } + + if ((Dir & SK_STOP_RX) != 0) { + /* + * The RX Stop Command will not terminate if no buffers + * are queued in the RxD ring. But it will always reach + * the Idle state. Therefore we can use this feature to + * stop the transfer of received packets. + */ + /* stop the port's receive queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP); + + i = 100; + do { + /* + * Clear packet arbiter timeout to make sure + * this loop will terminate + */ + SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ? + PA_CLR_TO_RX1 : PA_CLR_TO_RX2)); + + DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff); + + /* timeout if i==0 (bug fix for #10748) */ + if (--i == 0) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024, + SKERR_HWI_E024MSG); + break; + } + /* + * because of the ASIC problem report entry from 21.08.98 + * it is required to wait until CSR_STOP is reset and + * CSR_SV_IDLE is set. + */ + } while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE); + + /* The path data transfer activity is fully stopped now */ + + /* Perform a local reset of the port's Rx path */ + + /* Reset the PCI FIFO of the Rx queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET); + /* Reset the RAM Buffer receive queue */ + SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET); + + /* Reset Rx MAC FIFO */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET); + + /* switch Rx LED off, stop the LED counter */ + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Reset Rx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET); + } +#endif /* YUKON */ + } +} /* SkGeStopPort */ + + +/****************************************************************************** + * + * SkGeInit0() - Level 0 Initialization + * + * Description: + * - Initialize the BMU address offsets + * + * Returns: + * nothing + */ +static void SkGeInit0( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + int i; + SK_GEPORT *pPrt; + + for (i = 0; i < SK_MAX_MACS; i++) { + pPrt = &pAC->GIni.GP[i]; + + pPrt->PState = SK_PRT_RESET; + pPrt->PRxQOff = QOffTab[i].RxQOff; + pPrt->PXsQOff = QOffTab[i].XsQOff; + pPrt->PXaQOff = QOffTab[i].XaQOff; + pPrt->PCheckPar = SK_FALSE; + pPrt->PIsave = 0; + pPrt->PPrevShorts = 0; + pPrt->PLinkResCt = 0; + pPrt->PAutoNegTOCt = 0; + pPrt->PPrevRx = 0; + pPrt->PPrevFcs = 0; + pPrt->PRxLim = SK_DEF_RX_WA_LIM; + pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; + pPrt->PLinkSpeedCap = (SK_U8)SK_LSPEED_CAP_1000MBPS; + pPrt->PLinkSpeed = (SK_U8)SK_LSPEED_1000MBPS; + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_UNKNOWN; + pPrt->PLinkModeConf = (SK_U8)SK_LMODE_AUTOSENSE; + pPrt->PFlowCtrlMode = (SK_U8)SK_FLOW_MODE_SYM_OR_REM; + pPrt->PLinkCap = (SK_U8)(SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL | + SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL); + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + pPrt->PFlowCtrlCap = (SK_U8)SK_FLOW_MODE_SYM_OR_REM; + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + pPrt->PMSCap = 0; + pPrt->PMSMode = (SK_U8)SK_MS_MODE_AUTO; + pPrt->PMSStatus = (SK_U8)SK_MS_STAT_UNSET; + pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN; + pPrt->PAutoNegFail = SK_FALSE; + pPrt->PHWLinkUp = SK_FALSE; + pPrt->PLinkBroken = SK_TRUE; /* See WA code */ + pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE; + pPrt->PMacColThres = TX_COL_DEF; + pPrt->PMacJamLen = TX_JAM_LEN_DEF; + pPrt->PMacJamIpgVal = TX_JAM_IPG_DEF; + pPrt->PMacJamIpgData = TX_IPG_JAM_DEF; + pPrt->PMacIpgData = IPG_DATA_DEF; + pPrt->PMacLimit4 = SK_FALSE; + } + + pAC->GIni.GIPortUsage = SK_RED_LINK; + pAC->GIni.GILedBlinkCtrl = (SK_U16)OemConfig.Value; + pAC->GIni.GIValIrqMask = IS_ALL_MSK; + +} /* SkGeInit0*/ + + +/****************************************************************************** + * + * SkGeInit1() - Level 1 Initialization + * + * Description: + * o Do a software reset. + * o Clear all reset bits. + * o Verify that the detected hardware is present. + * Return an error if not. + * o Get the hardware configuration + * + Read the number of MACs/Ports. + * + Read the RAM size. + * + Read the PCI Revision Id. + * + Find out the adapters host clock speed + * + Read and check the PHY type + * + * Returns: + * 0: success + * 5: Unexpected PHY type detected + * 6: HW self test failed + */ +static int SkGeInit1( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + SK_U8 Byte; + SK_U16 Word; + SK_U16 CtrlStat; + SK_U32 DWord; + int RetVal; + int i; + + RetVal = 0; + + /* save CLK_RUN bits (YUKON-Lite) */ + SK_IN16(IoC, B0_CTST, &CtrlStat); + + /* do the SW-reset */ + SK_OUT8(IoC, B0_CTST, CS_RST_SET); + + /* release the SW-reset */ + SK_OUT8(IoC, B0_CTST, CS_RST_CLR); + + /* reset all error bits in the PCI STATUS register */ + /* + * Note: PCI Cfg cycles cannot be used, because they are not + * available on some platforms after 'boot time'. + */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + /* release Master Reset */ + SK_OUT8(IoC, B0_CTST, CS_MRST_CLR); + +#ifdef CLK_RUN + CtrlStat |= CS_CLK_RUN_ENA; +#endif /* CLK_RUN */ + + /* restore CLK_RUN bits */ + SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat & + (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA))); + + /* read Chip Identification Number */ + SK_IN8(IoC, B2_CHIP_ID, &Byte); + pAC->GIni.GIChipId = Byte; + + /* read number of MACs */ + SK_IN8(IoC, B2_MAC_CFG, &Byte); + pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2; + + /* get Chip Revision Number */ + pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4); + + /* get diff. PCI parameters */ + SK_IN16(IoC, B0_CTST, &CtrlStat); + + /* read the adapters RAM size */ + SK_IN8(IoC, B2_E_0, &Byte); + + pAC->GIni.GIGenesis = SK_FALSE; + pAC->GIni.GIYukon = SK_FALSE; + pAC->GIni.GIYukonLite = SK_FALSE; + +#ifdef GENESIS + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + + pAC->GIni.GIGenesis = SK_TRUE; + + if (Byte == (SK_U8)3) { + /* special case: 4 x 64k x 36, offset = 0x80000 */ + pAC->GIni.GIRamSize = 1024; + pAC->GIni.GIRamOffs = (SK_U32)512 * 1024; + } + else { + pAC->GIni.GIRamSize = (int)Byte * 512; + pAC->GIni.GIRamOffs = 0; + } + /* all GE adapters work with 53.125 MHz host clock */ + pAC->GIni.GIHstClkFact = SK_FACT_53; + + /* set Descr. Poll Timer Init Value to 250 ms */ + pAC->GIni.GIPollTimerVal = + SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100; + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIChipId != CHIP_ID_GENESIS) { + + pAC->GIni.GIYukon = SK_TRUE; + + pAC->GIni.GIRamSize = (Byte == (SK_U8)0) ? 128 : (int)Byte * 4; + + pAC->GIni.GIRamOffs = 0; + + /* WA for chip Rev. A */ + pAC->GIni.GIWolOffs = (pAC->GIni.GIChipId == CHIP_ID_YUKON && + pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0; + + /* get PM Capabilities of PCI config space */ + SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word); + + /* check if VAUX is available */ + if (((CtrlStat & CS_VAUX_AVAIL) != 0) && + /* check also if PME from D3cold is set */ + ((Word & PCI_PME_D3C_SUP) != 0)) { + /* set entry in GE init struct */ + pAC->GIni.GIVauxAvail = SK_TRUE; + } + + if (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE) { + /* this is Rev. A1 */ + pAC->GIni.GIYukonLite = SK_TRUE; + } + else { + /* save Flash-Address Register */ + SK_IN32(IoC, B2_FAR, &DWord); + + /* test Flash-Address Register */ + SK_OUT8(IoC, B2_FAR + 3, 0xff); + SK_IN8(IoC, B2_FAR + 3, &Byte); + + if (Byte != 0) { + /* this is Rev. A0 */ + pAC->GIni.GIYukonLite = SK_TRUE; + + /* restore Flash-Address Register */ + SK_OUT32(IoC, B2_FAR, DWord); + } + } + + /* switch power to VCC (WA for VAUX problem) */ + SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA | + PC_VAUX_OFF | PC_VCC_ON)); + + /* read the Interrupt source */ + SK_IN32(IoC, B0_ISRC, &DWord); + + if ((DWord & IS_HW_ERR) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &DWord); + + if ((DWord & IS_IRQ_SENSOR) != 0) { + /* disable HW Error IRQ */ + pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; + } + } + + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + /* set GMAC Link Control reset */ + SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET); + + /* clear GMAC Link Control reset */ + SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + /* all YU chips work with 78.125 MHz host clock */ + pAC->GIni.GIHstClkFact = SK_FACT_78; + + pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */ + } +#endif /* YUKON */ + + /* check if 64-bit PCI Slot is present */ + pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0); + + /* check if 66 MHz PCI Clock is active */ + pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0); + + /* read PCI HW Revision Id. */ + SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte); + pAC->GIni.GIPciHwRev = Byte; + + /* read the PMD type */ + SK_IN8(IoC, B2_PMD_TYP, &Byte); + pAC->GIni.GICopperType = (SK_U8)(Byte == 'T'); + + /* read the PHY type */ + SK_IN8(IoC, B2_E_1, &Byte); + + Byte &= 0x0f; /* the PHY type is stored in the lower nibble */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + switch (Byte) { + case SK_PHY_XMAC: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC; + break; + case SK_PHY_BCOM: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM; + pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO | + SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE; + break; + case SK_PHY_NAT: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT; + break; +#endif /* OTHER_PHY */ + default: + /* ERROR: unexpected PHY type detected */ + RetVal = 5; + break; + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + if (Byte < (SK_U8)SK_PHY_MARV_COPPER) { + /* if this field is not initialized */ + Byte = (SK_U8)SK_PHY_MARV_COPPER; + + pAC->GIni.GICopperType = SK_TRUE; + } + + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV; + + if (pAC->GIni.GICopperType) { + + pAC->GIni.GP[i].PLinkSpeedCap = (SK_U8)(SK_LSPEED_CAP_AUTO | + SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS | + SK_LSPEED_CAP_1000MBPS); + + pAC->GIni.GP[i].PLinkSpeed = (SK_U8)SK_LSPEED_AUTO; + + pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO | + SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE); + } + else { + Byte = (SK_U8)SK_PHY_MARV_FIBER; + } + } +#endif /* YUKON */ + + pAC->GIni.GP[i].PhyType = (int)Byte; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("PHY type: %d PHY addr: %04x\n", Byte, + pAC->GIni.GP[i].PhyAddr)); + } + + /* get MAC Type & set function pointers dependent on */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + pAC->GIni.GIMacType = SK_MAC_XMAC; + + pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats; + pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic; + pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter; + pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus; + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + pAC->GIni.GIMacType = SK_MAC_GMAC; + + pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats; + pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic; + pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter; + pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus; + +#ifdef SPECIAL_HANDLING + if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { + /* check HW self test result */ + SK_IN8(IoC, B2_E_3, &Byte); + if (Byte & B2_E3_RES_MASK) { + RetVal = 6; + } + } +#endif + } +#endif /* YUKON */ + + return(RetVal); +} /* SkGeInit1 */ + + +/****************************************************************************** + * + * SkGeInit2() - Level 2 Initialization + * + * Description: + * - start the Blink Source Counter + * - start the Descriptor Poll Timer + * - configure the MAC-Arbiter + * - configure the Packet-Arbiter + * - enable the Tx Arbiters + * - enable the RAM Interface Arbiter + * + * Returns: + * nothing + */ +static void SkGeInit2( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ +#ifdef GENESIS + SK_U32 DWord; +#endif /* GENESIS */ + int i; + + /* start the Descriptor Poll Timer */ + if (pAC->GIni.GIPollTimerVal != 0) { + if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) { + pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG); + } + SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal); + SK_OUT8(IoC, B28_DPT_CTRL, DPT_START); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* start the Blink Source Counter */ + DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100; + + SK_OUT32(IoC, B2_BSC_INI, DWord); + SK_OUT8(IoC, B2_BSC_CTRL, BSC_START); + + /* + * Configure the MAC Arbiter and the Packet Arbiter. + * They will be started once and never be stopped. + */ + SkGeInitMacArb(pAC, IoC); + + SkGeInitPktArb(pAC, IoC); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* start Time Stamp Timer */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START); + } +#endif /* YUKON */ + + /* enable the Tx Arbiters */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB); + } + + /* enable the RAM Interface Arbiter */ + SkGeInitRamIface(pAC, IoC); + +} /* SkGeInit2 */ + +/****************************************************************************** + * + * SkGeInit() - Initialize the GE Adapter with the specified level. + * + * Description: + * Level 0: Initialize the Module structures. + * Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has + * to be set before calling this level. + * + * o Do a software reset. + * o Clear all reset bits. + * o Verify that the detected hardware is present. + * Return an error if not. + * o Get the hardware configuration + * + Set GIMacsFound with the number of MACs. + * + Store the RAM size in GIRamSize. + * + Save the PCI Revision ID in GIPciHwRev. + * o return an error + * if Number of MACs > SK_MAX_MACS + * + * After returning from Level 0 the adapter + * may be accessed with IO operations. + * + * Level 2: start the Blink Source Counter + * + * Returns: + * 0: success + * 1: Number of MACs exceeds SK_MAX_MACS (after level 1) + * 2: Adapter not present or not accessible + * 3: Illegal initialization level + * 4: Initialization Level 1 Call missing + * 5: Unexpected PHY type detected + * 6: HW self test failed + */ +int SkGeInit( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Level) /* initialization level */ +{ + int RetVal; /* return value */ + SK_U32 DWord; + + RetVal = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("SkGeInit(Level %d)\n", Level)); + + switch (Level) { + case SK_INIT_DATA: + /* Initialization Level 0 */ + SkGeInit0(pAC, IoC); + pAC->GIni.GILevel = SK_INIT_DATA; + break; + + case SK_INIT_IO: + /* Initialization Level 1 */ + RetVal = SkGeInit1(pAC, IoC); + if (RetVal != 0) { + break; + } + + /* check if the adapter seems to be accessible */ + SK_OUT32(IoC, B2_IRQM_INI, SK_TEST_VAL); + SK_IN32(IoC, B2_IRQM_INI, &DWord); + SK_OUT32(IoC, B2_IRQM_INI, 0L); + + if (DWord != SK_TEST_VAL) { + RetVal = 2; + break; + } + + /* check if the number of GIMacsFound matches SK_MAX_MACS */ + if (pAC->GIni.GIMacsFound > SK_MAX_MACS) { + RetVal = 1; + break; + } + + /* Level 1 successfully passed */ + pAC->GIni.GILevel = SK_INIT_IO; + break; + + case SK_INIT_RUN: + /* Initialization Level 2 */ + if (pAC->GIni.GILevel != SK_INIT_IO) { +#ifndef SK_DIAG + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG); +#endif /* !SK_DIAG */ + RetVal = 4; + break; + } + SkGeInit2(pAC, IoC); + + /* Level 2 successfully passed */ + pAC->GIni.GILevel = SK_INIT_RUN; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG); + RetVal = 3; + break; + } + + return(RetVal); +} /* SkGeInit */ + + +/****************************************************************************** + * + * SkGeDeInit() - Deinitialize the adapter + * + * Description: + * All ports of the adapter will be stopped if not already done. + * Do a software reset and switch off all LEDs. + * + * Returns: + * nothing + */ +void SkGeDeInit( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + int i; + SK_U16 Word; + +#if (!defined(SK_SLIM) && !defined(VCPU)) + /* ensure I2C is ready */ + SkI2cWaitIrq(pAC, IoC); +#endif + + /* stop all current transfer activity */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + if (pAC->GIni.GP[i].PState != SK_PRT_STOP && + pAC->GIni.GP[i].PState != SK_PRT_RESET) { + + SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST); + } + } + + /* Reset all bits in the PCI STATUS register */ + /* + * Note: PCI Cfg cycles cannot be used, because they are not + * available on some platforms after 'boot time'. + */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + /* do the reset, all LEDs are switched off now */ + SK_OUT8(IoC, B0_CTST, CS_RST_SET); + + pAC->GIni.GILevel = SK_INIT_DATA; +} /* SkGeDeInit */ + + +/****************************************************************************** + * + * SkGeInitPort() Initialize the specified port. + * + * Description: + * PRxQSize, PXSQSize, and PXAQSize has to be + * configured for the specified port before calling this function. + * The descriptor rings has to be initialized too. + * + * o (Re)configure queues of the specified port. + * o configure the MAC of the specified port. + * o put ASIC and MAC(s) in operational mode. + * o initialize Rx/Tx and Sync LED + * o initialize RAM Buffers and MAC FIFOs + * + * The port is ready to connect when returning. + * + * Note: + * The MAC's Rx and Tx state machine is still disabled when returning. + * + * Returns: + * 0: success + * 1: Queue size initialization error. The configured values + * for PRxQSize, PXSQSize, or PXAQSize are invalid for one + * or more queues. The specified port was NOT initialized. + * An error log entry was generated. + * 2: The port has to be stopped before it can be initialized again. + */ +int SkGeInitPort( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port to configure */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (SkGeCheckQSize(pAC, Port) != 0) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG); + return(1); + } + + if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG); + return(2); + } + + /* configuration ok, initialize the Port now */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* initialize Rx, Tx and Link LED */ + /* + * If 1000BT Phy needs LED initialization than swap + * LED and XMAC initialization order + */ + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA); + /* The Link LED is initialized by RLMT or Diagnostics itself */ + + SkXmInitMac(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmInitMac(pAC, IoC, Port); + } +#endif /* YUKON */ + + /* do NOT initialize the Link Sync Counter */ + + SkGeInitMacFifo(pAC, IoC, Port); + + SkGeInitRamBufs(pAC, IoC, Port); + + if (pPrt->PXSQSize != 0) { + /* enable Force Sync bit if synchronous queue available */ + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC); + } + + SkGeInitBmu(pAC, IoC, Port); + + /* mark port as initialized */ + pPrt->PState = SK_PRT_INIT; + + return(0); +} /* SkGeInitPort */ diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c new file mode 100644 index 00000000000..0a6f67a7a39 --- /dev/null +++ b/drivers/net/sk98lin/skgemib.c @@ -0,0 +1,1075 @@ +/***************************************************************************** + * + * Name: skgemib.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.11 $ + * Date: $Date: 2003/09/15 13:38:12 $ + * Purpose: Private Network Management Interface Management Database + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * PRIVATE OID handler function prototypes + */ +PNMI_STATIC int Addr(SK_AC *pAC, SK_IOC IoC, int action, + SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int CsumStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int General(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Mac8023Stat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int MacPrivateConf(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int MacPrivateStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Monitor(SK_AC *pAC, SK_IOC IoC, int action, + SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int OidStruct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Perform(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int* pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Rlmt(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int RlmtStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int SensorStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Vpd(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); + +#ifdef SK_POWER_MGMT +PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +#endif /* SK_POWER_MGMT */ + +#ifdef SK_DIAG_SUPPORT +PNMI_STATIC int DiagActions(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +#endif /* SK_DIAG_SUPPORT */ + + +/* defines *******************************************************************/ +#define ID_TABLE_SIZE (sizeof(IdTable)/sizeof(IdTable[0])) + + +/* global variables **********************************************************/ + +/* + * Table to correlate OID with handler function and index to + * hardware register stored in StatAddress if applicable. + */ +PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = { + {OID_GEN_XMIT_OK, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX}, + {OID_GEN_RCV_OK, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX}, + {OID_GEN_XMIT_ERROR, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_GEN_RCV_ERROR, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_GEN_RCV_NO_BUFFER, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_GEN_DIRECTED_FRAMES_XMIT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNICAST}, + {OID_GEN_MULTICAST_FRAMES_XMIT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTICAST}, + {OID_GEN_BROADCAST_FRAMES_XMIT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_BROADCAST}, + {OID_GEN_DIRECTED_FRAMES_RCV, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_UNICAST}, + {OID_GEN_MULTICAST_FRAMES_RCV, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_MULTICAST}, + {OID_GEN_BROADCAST_FRAMES_RCV, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_BROADCAST}, + {OID_GEN_RCV_CRC_ERROR, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FCS}, + {OID_GEN_TRANSMIT_QUEUE_LENGTH, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_802_3_PERMANENT_ADDRESS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, 0}, + {OID_802_3_CURRENT_ADDRESS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, 0}, + {OID_802_3_RCV_ERROR_ALIGNMENT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FRAMING}, + {OID_802_3_XMIT_ONE_COLLISION, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_SINGLE_COL}, + {OID_802_3_XMIT_MORE_COLLISIONS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTI_COL}, + {OID_802_3_XMIT_DEFERRED, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_DEFFERAL}, + {OID_802_3_XMIT_MAX_COLLISIONS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_EXCESS_COL}, + {OID_802_3_RCV_OVERRUN, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_OVERFLOW}, + {OID_802_3_XMIT_UNDERRUN, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNDERRUN}, + {OID_802_3_XMIT_TIMES_CRS_LOST, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_CARRIER}, + {OID_802_3_XMIT_LATE_COLLISIONS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_LATE_COL}, +#ifdef SK_POWER_MGMT + {OID_PNP_CAPABILITIES, + 0, + 0, + 0, + SK_PNMI_RO, PowerManagement, 0}, + {OID_PNP_SET_POWER, + 0, + 0, + 0, + SK_PNMI_WO, PowerManagement, 0}, + {OID_PNP_QUERY_POWER, + 0, + 0, + 0, + SK_PNMI_RO, PowerManagement, 0}, + {OID_PNP_ADD_WAKE_UP_PATTERN, + 0, + 0, + 0, + SK_PNMI_WO, PowerManagement, 0}, + {OID_PNP_REMOVE_WAKE_UP_PATTERN, + 0, + 0, + 0, + SK_PNMI_WO, PowerManagement, 0}, + {OID_PNP_ENABLE_WAKE_UP, + 0, + 0, + 0, + SK_PNMI_RW, PowerManagement, 0}, +#endif /* SK_POWER_MGMT */ +#ifdef SK_DIAG_SUPPORT + {OID_SKGE_DIAG_MODE, + 0, + 0, + 0, + SK_PNMI_RW, DiagActions, 0}, +#endif /* SK_DIAG_SUPPORT */ + {OID_SKGE_MDB_VERSION, + 1, + 0, + SK_PNMI_MAI_OFF(MgmtDBVersion), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SUPPORTED_LIST, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_SKGE_ALL_DATA, + 0, + 0, + 0, + SK_PNMI_RW, OidStruct, 0}, + {OID_SKGE_VPD_FREE_BYTES, + 1, + 0, + SK_PNMI_MAI_OFF(VpdFreeBytes), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ENTRIES_LIST, + 1, + 0, + SK_PNMI_MAI_OFF(VpdEntriesList), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ENTRIES_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(VpdEntriesNumber), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_KEY, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdKey), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_VALUE, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdValue), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ACCESS, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAccess), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ACTION, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction), + SK_PNMI_RW, Vpd, 0}, + {OID_SKGE_PORT_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(PortNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DEVICE_TYPE, + 1, + 0, + SK_PNMI_MAI_OFF(DeviceType), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_DESCR, + 1, + 0, + SK_PNMI_MAI_OFF(DriverDescr), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_VERSION, + 1, + 0, + SK_PNMI_MAI_OFF(DriverVersion), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_RELDATE, + 1, + 0, + SK_PNMI_MAI_OFF(DriverReleaseDate), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_FILENAME, + 1, + 0, + SK_PNMI_MAI_OFF(DriverFileName), + SK_PNMI_RO, General, 0}, + {OID_SKGE_HW_DESCR, + 1, + 0, + SK_PNMI_MAI_OFF(HwDescr), + SK_PNMI_RO, General, 0}, + {OID_SKGE_HW_VERSION, + 1, + 0, + SK_PNMI_MAI_OFF(HwVersion), + SK_PNMI_RO, General, 0}, + {OID_SKGE_CHIPSET, + 1, + 0, + SK_PNMI_MAI_OFF(Chipset), + SK_PNMI_RO, General, 0}, + {OID_SKGE_CHIPID, + 1, + 0, + SK_PNMI_MAI_OFF(ChipId), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RAMSIZE, + 1, + 0, + SK_PNMI_MAI_OFF(RamSize), + SK_PNMI_RO, General, 0}, + {OID_SKGE_VAUXAVAIL, + 1, + 0, + SK_PNMI_MAI_OFF(VauxAvail), + SK_PNMI_RO, General, 0}, + {OID_SKGE_ACTION, + 1, + 0, + SK_PNMI_MAI_OFF(Action), + SK_PNMI_RW, Perform, 0}, + {OID_SKGE_RESULT, + 1, + 0, + SK_PNMI_MAI_OFF(TestResult), + SK_PNMI_RO, General, 0}, + {OID_SKGE_BUS_TYPE, + 1, + 0, + SK_PNMI_MAI_OFF(BusType), + SK_PNMI_RO, General, 0}, + {OID_SKGE_BUS_SPEED, + 1, + 0, + SK_PNMI_MAI_OFF(BusSpeed), + SK_PNMI_RO, General, 0}, + {OID_SKGE_BUS_WIDTH, + 1, + 0, + SK_PNMI_MAI_OFF(BusWidth), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_SW_QUEUE_LEN, + 1, + 0, + SK_PNMI_MAI_OFF(TxSwQueueLen), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_SW_QUEUE_MAX, + 1, + 0, + SK_PNMI_MAI_OFF(TxSwQueueMax), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_RETRY, + 1, + 0, + SK_PNMI_MAI_OFF(TxRetryCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_INTR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxIntrCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_INTR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(TxIntrCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_NO_BUF_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxNoBufCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_NO_BUF_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(TxNoBufCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_USED_DESCR_NO, + 1, + 0, + SK_PNMI_MAI_OFF(TxUsedDescrNo), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_DELIVERED_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxDeliveredCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_OCTETS_DELIV_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxOctetsDeliveredCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_HW_ERROR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxHwErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_HW_ERROR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(TxHwErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_IN_ERRORS_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(InErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_OUT_ERROR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(OutErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_ERR_RECOVERY_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(ErrRecoveryCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SYSUPTIME, + 1, + 0, + SK_PNMI_MAI_OFF(SysUpTime), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SENSOR_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(SensorNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SENSOR_INDEX, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorIndex), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_DESCR, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorDescr), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_TYPE, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorType), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_VALUE, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorValue), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_THRES_LOW, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdLow), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_THRES_UPP, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdHigh), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_THRES_LOW, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdLow), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_THRES_UPP, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdHigh), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_STATUS, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorStatus), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_CTS, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningCts), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_CTS, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorCts), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_TIME, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningTimestamp), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_TIME, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorTimestamp), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_CHKSM_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(ChecksumNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_CHKSM_RX_OK_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxOkCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_RX_UNABLE_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxUnableCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_RX_ERR_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxErrCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_TX_OK_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxOkCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_TX_UNABLE_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxUnableCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_STAT_TX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX}, + {OID_SKGE_STAT_TX_OCTETS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOctetsOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_OCTET}, + {OID_SKGE_STAT_TX_BROADCAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBroadcastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BROADCAST}, + {OID_SKGE_STAT_TX_MULTICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMulticastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTICAST}, + {OID_SKGE_STAT_TX_UNICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUnicastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNICAST}, + {OID_SKGE_STAT_TX_LONGFRAMES, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLongFramesCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LONGFRAMES}, + {OID_SKGE_STAT_TX_BURST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBurstCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BURST}, + {OID_SKGE_STAT_TX_PFLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxPauseMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_PMACC}, + {OID_SKGE_STAT_TX_FLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MACC}, + {OID_SKGE_STAT_TX_SINGLE_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSingleCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SINGLE_COL}, + {OID_SKGE_STAT_TX_MULTI_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMultipleCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTI_COL}, + {OID_SKGE_STAT_TX_EXCESS_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_COL}, + {OID_SKGE_STAT_TX_LATE_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLateCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LATE_COL}, + {OID_SKGE_STAT_TX_DEFFERAL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxDeferralCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_DEFFERAL}, + {OID_SKGE_STAT_TX_EXCESS_DEF, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveDeferralCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_DEF}, + {OID_SKGE_STAT_TX_UNDERRUN, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxFifoUnderrunCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNDERRUN}, + {OID_SKGE_STAT_TX_CARRIER, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxCarrierCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_CARRIER}, +/* {OID_SKGE_STAT_TX_UTIL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUtilization), + SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */ + {OID_SKGE_STAT_TX_64, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx64Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_64}, + {OID_SKGE_STAT_TX_127, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx127Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_127}, + {OID_SKGE_STAT_TX_255, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx255Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_255}, + {OID_SKGE_STAT_TX_511, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx511Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_511}, + {OID_SKGE_STAT_TX_1023, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx1023Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_1023}, + {OID_SKGE_STAT_TX_MAX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMaxCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MAX}, + {OID_SKGE_STAT_TX_SYNC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC}, + {OID_SKGE_STAT_TX_SYNC_OCTETS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncOctetsCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC_OCTET}, + {OID_SKGE_STAT_RX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX}, + {OID_SKGE_STAT_RX_OCTETS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOctetsOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OCTET}, + {OID_SKGE_STAT_RX_BROADCAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBroadcastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BROADCAST}, + {OID_SKGE_STAT_RX_MULTICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMulticastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MULTICAST}, + {OID_SKGE_STAT_RX_UNICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUnicastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_UNICAST}, + {OID_SKGE_STAT_RX_LONGFRAMES, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxLongFramesCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_LONGFRAMES}, + {OID_SKGE_STAT_RX_PFLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC}, + {OID_SKGE_STAT_RX_FLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC}, + {OID_SKGE_STAT_RX_PFLOWC_ERR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlErrorCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC_ERR}, + {OID_SKGE_STAT_RX_FLOWC_UNKWN, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlUnknownCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC_UNKWN}, + {OID_SKGE_STAT_RX_BURST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBurstCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BURST}, + {OID_SKGE_STAT_RX_MISSED, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMissedCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MISSED}, + {OID_SKGE_STAT_RX_FRAMING, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFramingCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FRAMING}, + {OID_SKGE_STAT_RX_OVERFLOW, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFifoOverflowCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OVERFLOW}, + {OID_SKGE_STAT_RX_JABBER, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxJabberCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_JABBER}, + {OID_SKGE_STAT_RX_CARRIER, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCarrierCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CARRIER}, + {OID_SKGE_STAT_RX_IR_LENGTH, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxIRLengthCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_IRLENGTH}, + {OID_SKGE_STAT_RX_SYMBOL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxSymbolCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SYMBOL}, + {OID_SKGE_STAT_RX_SHORTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxShortsCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SHORTS}, + {OID_SKGE_STAT_RX_RUNT, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxRuntCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_RUNT}, + {OID_SKGE_STAT_RX_CEXT, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCextCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CEXT}, + {OID_SKGE_STAT_RX_TOO_LONG, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxTooLongCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_TOO_LONG}, + {OID_SKGE_STAT_RX_FCS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFcsCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FCS}, +/* {OID_SKGE_STAT_RX_UTIL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUtilization), + SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */ + {OID_SKGE_STAT_RX_64, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx64Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_64}, + {OID_SKGE_STAT_RX_127, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx127Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_127}, + {OID_SKGE_STAT_RX_255, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx255Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_255}, + {OID_SKGE_STAT_RX_511, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx511Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_511}, + {OID_SKGE_STAT_RX_1023, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx1023Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_1023}, + {OID_SKGE_STAT_RX_MAX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMaxCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MAX}, + {OID_SKGE_PHYS_CUR_ADDR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacCurrentAddr), + SK_PNMI_RW, Addr, 0}, + {OID_SKGE_PHYS_FAC_ADDR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacFactoryAddr), + SK_PNMI_RO, Addr, 0}, + {OID_SKGE_PMD, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPMD), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_CONNECTOR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_PHY_TYPE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_LINK_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_LINK_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_LINK_MODE_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkModeStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_LINK_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_FLOWCTRL_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_FLOWCTRL_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_FLOWCTRL_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_PHY_OPERATION_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_PHY_OPERATION_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_PHY_OPERATION_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_SPEED_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_SPEED_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_SPEED_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_TRAP, + 1, + 0, + SK_PNMI_MAI_OFF(Trap), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TRAP_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(TrapNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RLMT_MODE, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtMode), + SK_PNMI_RW, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtPortNumber), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_ACTIVE, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtPortActive), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_PREFERRED, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtPortPreferred), + SK_PNMI_RW, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeCts), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_TIME, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeTime), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_ESTIM, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeEstimate), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_THRES, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeThreshold), + SK_PNMI_RW, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_INDEX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtIndex), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtStatus), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_TX_HELLO_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxHelloCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_RX_HELLO_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxHelloCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_TX_SP_REQ_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxSpHelloReqCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_RX_SP_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxSpHelloCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_MONITOR_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtMonitorNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RLMT_MONITOR_INDEX, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorIndex), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_ADDR, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAddr), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_ERRS, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorErrorCts), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_TIMESTAMP, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorTimestamp), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_ADMIN, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAdmin), + SK_PNMI_RW, Monitor, 0}, + {OID_SKGE_MTU, + 1, + 0, + SK_PNMI_MAI_OFF(MtuSize), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_VCT_GET, + 0, + 0, + 0, + SK_PNMI_RO, Vct, 0}, + {OID_SKGE_VCT_SET, + 0, + 0, + 0, + SK_PNMI_WO, Vct, 0}, + {OID_SKGE_VCT_STATUS, + 0, + 0, + 0, + SK_PNMI_RO, Vct, 0}, + {OID_SKGE_BOARDLEVEL, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, +}; + diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c new file mode 100644 index 00000000000..b36dd9ac6b2 --- /dev/null +++ b/drivers/net/sk98lin/skgepnmi.c @@ -0,0 +1,8210 @@ +/***************************************************************************** + * + * Name: skgepnmi.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.111 $ + * Date: $Date: 2003/09/15 13:35:35 $ + * Purpose: Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + +#ifndef _lint +static const char SysKonnectFileId[] = + "@(#) $Id: skgepnmi.c,v 1.111 2003/09/15 13:35:35 tschilli Exp $ (C) Marvell."; +#endif /* !_lint */ + +#include "h/skdrv1st.h" +#include "h/sktypes.h" +#include "h/xmac_ii.h" +#include "h/skdebug.h" +#include "h/skqueue.h" +#include "h/skgepnmi.h" +#include "h/skgesirq.h" +#include "h/skcsum.h" +#include "h/skvpd.h" +#include "h/skgehw.h" +#include "h/skgeinit.h" +#include "h/skdrv2nd.h" +#include "h/skgepnm2.h" +#ifdef SK_POWER_MGMT +#include "h/skgepmgt.h" +#endif +/* defines *******************************************************************/ + +#ifndef DEBUG +#define PNMI_STATIC static +#else /* DEBUG */ +#define PNMI_STATIC +#endif /* DEBUG */ + +/* + * Public Function prototypes + */ +int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level); +int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param); +int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf, + unsigned int * pLen, SK_U32 NetIndex); + + +/* + * Private Function prototypes + */ + +PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int + PhysPortIndex); +PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int + PhysPortIndex); +PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac); +PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf); +PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC, + unsigned int PhysPortIndex, unsigned int StatIndex); +PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex, + unsigned int StatIndex, SK_U32 NetIndex); +PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size); +PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen, + unsigned int *pEntries); +PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr, + unsigned int KeyArrLen, unsigned int *pKeyNo); +PNMI_STATIC int LookupId(SK_U32 Id); +PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac, + unsigned int LastMac); +PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac); +PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId, + unsigned int PortIndex); +PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId, + unsigned int SensorIndex); +PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId); +PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); +PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); +PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC); +PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf); +PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf, + unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32); + +/* + * Table to correlate OID with handler function and index to + * hardware register stored in StatAddress if applicable. + */ +#include "skgemib.c" + +/* global variables **********************************************************/ + +/* + * Overflow status register bit table and corresponding counter + * dependent on MAC type - the number relates to the size of overflow + * mask returned by the pFnMacOverflow function + */ +PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = { +/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST}, +/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST}, +/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC}, +/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST}, +/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW}, +/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH}, +/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64}, +/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127}, +/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255}, +/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511}, +/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023}, +/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX}, +/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES}, +/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED}, +/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL}, +/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL}, +/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL}, +/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL}, +/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL}, +/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN}, +/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED}, +/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED}, +/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED}, +/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED}, +/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED}, +/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED}, +/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST}, +/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST}, +/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC}, +/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST}, +/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS}, +/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED}, +/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW}, +/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH}, +/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW}, +/* Bit41 */ { SK_PNMI_HRX_MACC_UNKWN, SK_PNMI_HRX_BADOCTETHIGH}, +/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE}, +/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT}, +/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64}, +/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127}, +/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255}, +/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511}, +/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023}, +/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX}, +/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES}, +/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG}, +/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER}, +/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED}, +/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW}, +/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED}, +/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED}, +/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED}, +/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED}, +/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED}, +/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED}, +/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED}, +/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED}, +/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED} +}; + +/* + * Table for hardware register saving on resets and port switches + */ +PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = { + /* SK_PNMI_HTX */ + {{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_OCTETHIGH */ + {{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}}, + /* SK_PNMI_HTX_OCTETLOW */ + {{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}}, + /* SK_PNMI_HTX_BROADCAST */ + {{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_MULTICAST */ + {{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_UNICAST */ + {{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_BURST */ + {{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_PMACC */ + {{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}}, + /* SK_PNMI_HTX_MACC */ + {{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_COL */ + {{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}}, + /* SK_PNMI_HTX_SINGLE_COL */ + {{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}}, + /* SK_PNMI_HTX_MULTI_COL */ + {{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}}, + /* SK_PNMI_HTX_EXCESS_COL */ + {{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}}, + /* SK_PNMI_HTX_LATE_COL */ + {{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}}, + /* SK_PNMI_HTX_DEFFERAL */ + {{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_EXCESS_DEF */ + {{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UNDERRUN */ + {{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}}, + /* SK_PNMI_HTX_CARRIER */ + {{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UTILUNDER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UTILOVER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_64 */ + {{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}}, + /* SK_PNMI_HTX_127 */ + {{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}}, + /* SK_PNMI_HTX_255 */ + {{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}}, + /* SK_PNMI_HTX_511 */ + {{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}}, + /* SK_PNMI_HTX_1023 */ + {{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}}, + /* SK_PNMI_HTX_MAX */ + {{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}}, + /* SK_PNMI_HTX_LONGFRAMES */ + {{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}}, + /* SK_PNMI_HTX_SYNC */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_SYNC_OCTET */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_RESERVED */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX */ + {{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_OCTETHIGH */ + {{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}}, + /* SK_PNMI_HRX_OCTETLOW */ + {{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}}, + /* SK_PNMI_HRX_BADOCTETHIGH */ + {{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}}, + /* SK_PNMI_HRX_BADOCTETLOW */ + {{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}}, + /* SK_PNMI_HRX_BROADCAST */ + {{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_MULTICAST */ + {{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_UNICAST */ + {{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_PMACC */ + {{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}}, + /* SK_PNMI_HRX_MACC */ + {{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_PMACC_ERR */ + {{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_MACC_UNKWN */ + {{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_BURST */ + {{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_MISSED */ + {{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_FRAMING */ + {{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UNDERSIZE */ + {{0, SK_FALSE}, {GM_RXF_SHT, SK_TRUE}}, + /* SK_PNMI_HRX_OVERFLOW */ + {{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}}, + /* SK_PNMI_HRX_JABBER */ + {{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}}, + /* SK_PNMI_HRX_CARRIER */ + {{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_IRLENGTH */ + {{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_SYMBOL */ + {{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_SHORTS */ + {{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_RUNT */ + {{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}}, + /* SK_PNMI_HRX_TOO_LONG */ + {{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}}, + /* SK_PNMI_HRX_FCS */ + {{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}}, + /* SK_PNMI_HRX_CEXT */ + {{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UTILUNDER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UTILOVER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_64 */ + {{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}}, + /* SK_PNMI_HRX_127 */ + {{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}}, + /* SK_PNMI_HRX_255 */ + {{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}}, + /* SK_PNMI_HRX_511 */ + {{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}}, + /* SK_PNMI_HRX_1023 */ + {{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}}, + /* SK_PNMI_HRX_MAX */ + {{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}}, + /* SK_PNMI_HRX_LONGFRAMES */ + {{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}}, + /* SK_PNMI_HRX_RESERVED */ + {{0, SK_FALSE}, {0, SK_FALSE}} +}; + + +/***************************************************************************** + * + * Public functions + * + */ + +/***************************************************************************** + * + * SkPnmiInit - Init function of PNMI + * + * Description: + * SK_INIT_DATA: Initialises the data structures + * SK_INIT_IO: Resets the XMAC statistics, determines the device and + * connector type. + * SK_INIT_RUN: Starts a timer event for port switch per hour + * calculation. + * + * Returns: + * Always 0 + */ +int SkPnmiInit( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Level) /* Initialization level */ +{ + unsigned int PortMax; /* Number of ports */ + unsigned int PortIndex; /* Current port index in loop */ + SK_U16 Val16; /* Multiple purpose 16 bit variable */ + SK_U8 Val8; /* Mulitple purpose 8 bit variable */ + SK_EVPARA EventParam; /* Event struct for timer event */ + SK_PNMI_VCT *pVctBackupData; + + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiInit: Called, level=%d\n", Level)); + + switch (Level) { + + case SK_INIT_DATA: + SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi)); + pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN; + pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES; + for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) { + + pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE; + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + +#ifdef SK_PNMI_CHECK + if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, + ("CounterOffset struct size (%d) differs from" + "SK_PNMI_MAX_IDX (%d)\n", + SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX)); + } + + if (SK_PNMI_MAX_IDX != + (sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, + ("StatAddr table size (%d) differs from " + "SK_PNMI_MAX_IDX (%d)\n", + (sizeof(StatAddr) / + (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)), + SK_PNMI_MAX_IDX)); + } +#endif /* SK_PNMI_CHECK */ + break; + + case SK_INIT_IO: + /* + * Reset MAC counters + */ + PortMax = pAC->GIni.GIMacsFound; + + for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { + + pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex); + } + + /* Initialize DSP variables for Vct() to 0xff => Never written! */ + for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { + pAC->GIni.GP[PortIndex].PCableLen = 0xff; + pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex]; + pVctBackupData->PCableLen = 0xff; + } + + /* + * Get pci bus speed + */ + SK_IN16(IoC, B0_CTST, &Val16); + if ((Val16 & CS_BUS_CLOCK) == 0) { + + pAC->Pnmi.PciBusSpeed = 33; + } + else { + pAC->Pnmi.PciBusSpeed = 66; + } + + /* + * Get pci bus width + */ + SK_IN16(IoC, B0_CTST, &Val16); + if ((Val16 & CS_BUS_SLOT_SZ) == 0) { + + pAC->Pnmi.PciBusWidth = 32; + } + else { + pAC->Pnmi.PciBusWidth = 64; + } + + /* + * Get chipset + */ + switch (pAC->GIni.GIChipId) { + case CHIP_ID_GENESIS: + pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC; + break; + + case CHIP_ID_YUKON: + pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON; + break; + + default: + break; + } + + /* + * Get PMD and DeviceType + */ + SK_IN8(IoC, B2_PMD_TYP, &Val8); + switch (Val8) { + case 'S': + pAC->Pnmi.PMD = 3; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020002; + } + else { + pAC->Pnmi.DeviceType = 0x00020001; + } + break; + + case 'L': + pAC->Pnmi.PMD = 2; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020004; + } + else { + pAC->Pnmi.DeviceType = 0x00020003; + } + break; + + case 'C': + pAC->Pnmi.PMD = 4; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020006; + } + else { + pAC->Pnmi.DeviceType = 0x00020005; + } + break; + + case 'T': + pAC->Pnmi.PMD = 5; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020008; + } + else { + pAC->Pnmi.DeviceType = 0x00020007; + } + break; + + default : + pAC->Pnmi.PMD = 1; + pAC->Pnmi.DeviceType = 0; + break; + } + + /* + * Get connector + */ + SK_IN8(IoC, B2_CONN_TYP, &Val8); + switch (Val8) { + case 'C': + pAC->Pnmi.Connector = 2; + break; + + case 'D': + pAC->Pnmi.Connector = 3; + break; + + case 'F': + pAC->Pnmi.Connector = 4; + break; + + case 'J': + pAC->Pnmi.Connector = 5; + break; + + case 'V': + pAC->Pnmi.Connector = 6; + break; + + default: + pAC->Pnmi.Connector = 1; + break; + } + break; + + case SK_INIT_RUN: + /* + * Start timer for RLMT change counter + */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, + 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, + EventParam); + break; + + default: + break; /* Nothing todo */ + } + + return (0); +} + +/***************************************************************************** + * + * SkPnmiGetVar - Retrieves the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. If the instance + * -1 is passed, the values of all instances are returned in an + * array of values. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +static int SkPnmiGetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which the management data will be copied */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiPreSetVar - Presets the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is useful to check if a set might be successfull. + * If the instance -1 is passed, an array of values is supposed and + * all instances of the OID will be set. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +static int SkPnmiPreSetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which the management data will be copied */ +unsigned int *pLen, /* Total length of management data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + + return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiSetVar - Sets the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is useful to check if a set might be successfull. + * If the instance -1 is passed, an array of values is supposed and + * all instances of the OID will be set. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiSetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which the management data will be copied */ +unsigned int *pLen, /* Total length of management data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Runs through the IdTable, queries the single OIDs and stores the + * returned data into the management database structure + * SK_PNMI_STRUCT_DATA. The offset of the OID in the structure + * is stored in the IdTable. The return value of the function will also + * be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the + * minimum size of SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +int SkPnmiGetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer to which the management data will be copied. */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int TableIndex; + unsigned int DstOffset; + unsigned int InstanceNo; + unsigned int InstanceCnt; + SK_U32 Instance; + unsigned int TmpLen; + char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; + + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + if (*pLen < SK_PNMI_STRUCT_SIZE) { + + if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { + + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, + (SK_U32)(-1)); + } + + *pLen = SK_PNMI_STRUCT_SIZE; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Check NetIndex + */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + /* Update statistic */ + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call"); + + if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) != + SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + /* + * Increment semaphores to indicate that an update was + * already done + */ + pAC->Pnmi.MacUpdatedFlag ++; + pAC->Pnmi.RlmtUpdatedFlag ++; + pAC->Pnmi.SirqUpdatedFlag ++; + + /* Get vpd keys for instance calculation */ + Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen); + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_GENERAL); + } + + /* Retrieve values */ + SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE); + for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { + + InstanceNo = IdTable[TableIndex].InstanceNo; + for (InstanceCnt = 1; InstanceCnt <= InstanceNo; + InstanceCnt ++) { + + DstOffset = IdTable[TableIndex].Offset + + (InstanceCnt - 1) * + IdTable[TableIndex].StructSize; + + /* + * For the VPD the instance is not an index number + * but the key itself. Determin with the instance + * counter the VPD key to be used. + */ + if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY || + IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE || + IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS || + IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) { + + SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4); + } + else { + Instance = (SK_U32)InstanceCnt; + } + + TmpLen = *pLen - DstOffset; + Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET, + IdTable[TableIndex].Id, (char *)pBuf + + DstOffset, &TmpLen, Instance, TableIndex, NetIndex); + + /* + * An unknown instance error means that we reached + * the last instance of that variable. Proceed with + * the next OID in the table and ignore the return + * code. + */ + if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { + + break; + } + + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, Ret, DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + } + } + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + *pLen = SK_PNMI_STRUCT_SIZE; + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Calls a general sub-function for all this set stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is useful to check if a set might be successfull. + * The sub-function runs through the IdTable, checks which OIDs are able + * to set, and calls the handler function of the OID to perform the + * preset. The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + */ +int SkPnmiPreSetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf, + pLen, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Calls a general sub-function for all this set stuff. The return value + * of the function will also be stored in SK_PNMI_STRUCT_DATA if the + * passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE. + * The sub-function runs through the IdTable, checks which OIDs are able + * to set, and calls the handler function of the OID to perform the + * set. The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + */ +int SkPnmiSetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf, + pLen, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiEvent - Event handler + * + * Description: + * Handles the following events: + * SK_PNMI_EVT_SIRQ_OVERFLOW When a hardware counter overflows an + * interrupt will be generated which is + * first handled by SIRQ which generates a + * this event. The event increments the + * upper 32 bit of the 64 bit counter. + * SK_PNMI_EVT_SEN_XXX The event is generated by the I2C module + * when a sensor reports a warning or + * error. The event will store a trap + * message in the trap buffer. + * SK_PNMI_EVT_CHG_EST_TIMER The timer event was initiated by this + * module and is used to calculate the + * port switches per hour. + * SK_PNMI_EVT_CLEAR_COUNTER The event clears all counters and + * timestamps. + * SK_PNMI_EVT_XMAC_RESET The event is generated by the driver + * before a hard reset of the XMAC is + * performed. All counters will be saved + * and added to the hardware counter + * values after reset to grant continuous + * counter values. + * SK_PNMI_EVT_RLMT_PORT_UP Generated by RLMT to notify that a port + * went logically up. A trap message will + * be stored to the trap buffer. + * SK_PNMI_EVT_RLMT_PORT_DOWN Generated by RLMT to notify that a port + * went logically down. A trap message will + * be stored to the trap buffer. + * SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two + * spanning tree root bridges were + * detected. A trap message will be stored + * to the trap buffer. + * SK_PNMI_EVT_RLMT_ACTIVE_DOWN Notifies PNMI that an active port went + * down. PNMI will not further add the + * statistic values to the virtual port. + * SK_PNMI_EVT_RLMT_ACTIVE_UP Notifies PNMI that a port went up and + * is now an active port. PNMI will now + * add the statistic data of this port to + * the virtual port. + * SK_PNMI_EVT_RLMT_SET_NETS Notifies PNMI about the net mode. The first parameter + * contains the number of nets. 1 means single net, 2 means + * dual net. The second parameter is -1 + * + * Returns: + * Always 0 + */ +int SkPnmiEvent( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Event, /* Event-Id */ +SK_EVPARA Param) /* Event dependent parameter */ +{ + unsigned int PhysPortIndex; + unsigned int MaxNetNumber; + int CounterIndex; + int Ret; + SK_U16 MacStatus; + SK_U64 OverflowStatus; + SK_U64 Mask; + int MacType; + SK_U64 Value; + SK_U32 Val32; + SK_U16 Register; + SK_EVPARA EventParam; + SK_U64 NewestValue; + SK_U64 OldestValue; + SK_U64 Delta; + SK_PNMI_ESTIMATE *pEst; + SK_U32 NetIndex; + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + SK_U32 RetCode; + int i; + SK_U32 CableLength; + + +#ifdef DEBUG + if (Event != SK_PNMI_EVT_XMAC_RESET) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n", + (unsigned int)Event, (unsigned int)Param.Para64)); + } +#endif /* DEBUG */ + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call"); + + MacType = pAC->GIni.GIMacType; + + switch (Event) { + + case SK_PNMI_EVT_SIRQ_OVERFLOW: + PhysPortIndex = (int)Param.Para32[0]; + MacStatus = (SK_U16)Param.Para32[1]; +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter" + " wrong, PhysPortIndex=0x%x\n", + PhysPortIndex)); + return (0); + } +#endif /* DEBUG */ + OverflowStatus = 0; + + /* + * Check which source caused an overflow interrupt. + */ + if ((pAC->GIni.GIFunc.pFnMacOverflow(pAC, IoC, PhysPortIndex, + MacStatus, &OverflowStatus) != 0) || + (OverflowStatus == 0)) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + + /* + * Check the overflow status register and increment + * the upper dword of corresponding counter. + */ + for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8; + CounterIndex ++) { + + Mask = (SK_U64)1 << CounterIndex; + if ((OverflowStatus & Mask) == 0) { + + continue; + } + + switch (StatOvrflwBit[CounterIndex][MacType]) { + + case SK_PNMI_HTX_UTILUNDER: + case SK_PNMI_HTX_UTILOVER: + if (MacType == SK_MAC_XMAC) { + XM_IN16(IoC, PhysPortIndex, XM_TX_CMD, &Register); + Register |= XM_TX_SAM_LINE; + XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD, Register); + } + break; + + case SK_PNMI_HRX_UTILUNDER: + case SK_PNMI_HRX_UTILOVER: + if (MacType == SK_MAC_XMAC) { + XM_IN16(IoC, PhysPortIndex, XM_RX_CMD, &Register); + Register |= XM_RX_SAM_LINE; + XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD, Register); + } + break; + + case SK_PNMI_HTX_OCTETHIGH: + case SK_PNMI_HTX_OCTETLOW: + case SK_PNMI_HTX_RESERVED: + case SK_PNMI_HRX_OCTETHIGH: + case SK_PNMI_HRX_OCTETLOW: + case SK_PNMI_HRX_IRLENGTH: + case SK_PNMI_HRX_RESERVED: + + /* + * the following counters aren't be handled (id > 63) + */ + case SK_PNMI_HTX_SYNC: + case SK_PNMI_HTX_SYNC_OCTET: + break; + + case SK_PNMI_HRX_LONGFRAMES: + if (MacType == SK_MAC_GMAC) { + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] ++; + } + break; + + default: + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] ++; + } + } + break; + + case SK_PNMI_EVT_SEN_WAR_LOW: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_WAR_UPP: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_ERR_LOW: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_ERR_UPP: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_CHG_EST_TIMER: + /* + * Calculate port switch average on a per hour basis + * Time interval for check : 28125 ms + * Number of values for average : 8 + * + * Be careful in changing these values, on change check + * - typedef of SK_PNMI_ESTIMATE (Size of EstValue + * array one less than value number) + * - Timer initialization SkTimerStart() in SkPnmiInit + * - Delta value below must be multiplicated with + * power of 2 + * + */ + pEst = &pAC->Pnmi.RlmtChangeEstimate; + CounterIndex = pEst->EstValueIndex + 1; + if (CounterIndex == 7) { + + CounterIndex = 0; + } + pEst->EstValueIndex = CounterIndex; + + NewestValue = pAC->Pnmi.RlmtChangeCts; + OldestValue = pEst->EstValue[CounterIndex]; + pEst->EstValue[CounterIndex] = NewestValue; + + /* + * Calculate average. Delta stores the number of + * port switches per 28125 * 8 = 225000 ms + */ + if (NewestValue >= OldestValue) { + + Delta = NewestValue - OldestValue; + } + else { + /* Overflow situation */ + Delta = (SK_U64)(0 - OldestValue) + NewestValue; + } + + /* + * Extrapolate delta to port switches per hour. + * Estimate = Delta * (3600000 / 225000) + * = Delta * 16 + * = Delta << 4 + */ + pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4; + + /* + * Check if threshold is exceeded. If the threshold is + * permanently exceeded every 28125 ms an event will be + * generated to remind the user of this condition. + */ + if ((pAC->Pnmi.RlmtChangeThreshold != 0) && + (pAC->Pnmi.RlmtChangeEstimate.Estimate >= + pAC->Pnmi.RlmtChangeThreshold)) { + + QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + } + + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, + 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, + EventParam); + break; + + case SK_PNMI_EVT_CLEAR_COUNTER: + /* + * Param.Para32[0] contains the NetIndex (0 ..1). + * Param.Para32[1] is reserved, contains -1. + */ + NetIndex = (SK_U32)Param.Para32[0]; + +#ifdef DEBUG + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n", + NetIndex)); + + return (0); + } +#endif /* DEBUG */ + + /* + * Set all counters and timestamps to zero. + * The according NetIndex is required as a + * parameter of the event. + */ + ResetCounter(pAC, IoC, NetIndex); + break; + + case SK_PNMI_EVT_XMAC_RESET: + /* + * To grant continuous counter values store the current + * XMAC statistic values to the entries 1..n of the + * CounterOffset array. XMAC Errata #2 + */ +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + PhysPortIndex = (unsigned int)Param.Para64; + + /* + * Update XMAC statistic to get fresh values + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + /* + * Increment semaphore to indicate that an update was + * already done + */ + pAC->Pnmi.MacUpdatedFlag ++; + + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + pAC->Pnmi.Port[PhysPortIndex].CounterOffset[CounterIndex] = + GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.Port[PhysPortIndex].CounterHigh[CounterIndex] = 0; + } + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_PORT_UP: + PhysPortIndex = (unsigned int)Param.Para32[0]; +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter" + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* Bugfix for XMAC errata (#10620)*/ + if (MacType == SK_MAC_XMAC) { + /* Add incremental difference to offset (#10620)*/ + (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, + XM_RXE_SHT_ERR, &Val32); + + Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); + pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] += + Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark; + } + + /* Tell VctStatus() that a link was up meanwhile. */ + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK; + break; + + case SK_PNMI_EVT_RLMT_PORT_DOWN: + PhysPortIndex = (unsigned int)Param.Para32[0]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter" + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* Bugfix #10620 - get zero level for incremental difference */ + if (MacType == SK_MAC_XMAC) { + + (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, + XM_RXE_SHT_ERR, &Val32); + + pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark = + (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); + } + break; + + case SK_PNMI_EVT_RLMT_ACTIVE_DOWN: + PhysPortIndex = (unsigned int)Param.Para32[0]; + NetIndex = (SK_U32)Param.Para32[1]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n", + PhysPortIndex)); + } + + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n", + NetIndex)); + } +#endif /* DEBUG */ + + /* + * For now, ignore event if NetIndex != 0. + */ + if (Param.Para32[1] != 0) { + + return (0); + } + + /* + * Nothing to do if port is already inactive + */ + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + return (0); + } + + /* + * Update statistic counters to calculate new offset for the virtual + * port and increment semaphore to indicate that an update was already + * done. + */ + if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != + SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Calculate new counter offset for virtual port to grant continous + * counting on port switches. The virtual port consists of all currently + * active ports. The port down event indicates that a port is removed + * from the virtual port. Therefore add the counter value of the removed + * port to the CounterOffset for the virtual port to grant the same + * counter value. + */ + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value; + } + + /* + * Set port to inactive + */ + pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE; + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_ACTIVE_UP: + PhysPortIndex = (unsigned int)Param.Para32[0]; + NetIndex = (SK_U32)Param.Para32[1]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n", + PhysPortIndex)); + } + + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n", + NetIndex)); + } +#endif /* DEBUG */ + + /* + * For now, ignore event if NetIndex != 0. + */ + if (Param.Para32[1] != 0) { + + return (0); + } + + /* + * Nothing to do if port is already active + */ + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + return (0); + } + + /* + * Statistic maintenance + */ + pAC->Pnmi.RlmtChangeCts ++; + pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtNewMacTrap(pAC, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* + * Update statistic counters to calculate new offset for the virtual + * port and increment semaphore to indicate that an update was + * already done. + */ + if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != + SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Calculate new counter offset for virtual port to grant continous + * counting on port switches. A new port is added to the virtual port. + * Therefore substract the counter value of the new port from the + * CounterOffset for the virtual port to grant the same value. + */ + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value; + } + + /* Set port to active */ + pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE; + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_SEGMENTATION: + /* + * Para.Para32[0] contains the NetIndex. + */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_RLMT_SET_NETS: + /* + * Param.Para32[0] contains the number of Nets. + * Param.Para32[1] is reserved, contains -1. + */ + /* + * Check number of nets + */ + MaxNetNumber = pAC->GIni.GIMacsFound; + if (((unsigned int)Param.Para32[0] < 1) + || ((unsigned int)Param.Para32[0] > MaxNetNumber)) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + else { /* dual net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_TRUE; + } + break; + + case SK_PNMI_EVT_VCT_RESET: + PhysPortIndex = Param.Para32[0]; + pPrt = &pAC->GIni.GP[PhysPortIndex]; + pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; + + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 2) { + /* + * VCT test is still running. + * Start VCT timer counter again. + */ + SK_MEMSET((char *) &Param, 0, sizeof(Param)); + Param.Para32[0] = PhysPortIndex; + Param.Para32[1] = -1; + SkTimerStart(pAC, IoC, + &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, + 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param); + break; + } + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] |= + (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); + + /* Copy results for later use to PNMI struct. */ + for (i = 0; i < 4; i++) { + if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { + if ((pPrt->PMdiPairLen[i] > 35) && + (pPrt->PMdiPairLen[i] < 0xff)) { + pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; + } + } + if ((pPrt->PMdiPairLen[i] > 35) && + (pPrt->PMdiPairLen[i] != 0xff)) { + CableLength = 1000 * + (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); + } + else { + CableLength = 0; + } + pVctBackupData->PMdiPairLen[i] = CableLength; + pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; + } + + Param.Para32[0] = PhysPortIndex; + Param.Para32[1] = -1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param); + SkEventDispatcher(pAC, IoC); + } + + break; + + default: + break; + } + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); +} + + +/****************************************************************************** + * + * Private functions + * + */ + +/***************************************************************************** + * + * PnmiVar - Gets, presets, and sets single OIDs + * + * Description: + * Looks up the requested OID, calls the corresponding handler + * function, and passes the parameters with the get, preset, or + * set command. The function is called by SkGePnmiGetVar, + * SkGePnmiPreSetVar, or SkGePnmiSetVar. + * + * Returns: + * SK_PNMI_ERR_XXX. For details have a look at the description of the + * calling functions. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +PNMI_STATIC int PnmiVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* Total length of pBuf management data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int TableIndex; + int Ret; + + + if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_OID); + } + + /* Check NetIndex */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + SK_PNMI_CHECKFLAGS("PnmiVar: On call"); + + Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen, + Instance, TableIndex, NetIndex); + + SK_PNMI_CHECKFLAGS("PnmiVar: On return"); + + return (Ret); +} + +/***************************************************************************** + * + * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA + * + * Description: + * The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable, + * checks which OIDs are able to set, and calls the handler function of + * the OID to perform the set. The return value of the function will + * also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the + * minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called + * by SkGePnmiPreSetStruct and SkGePnmiSetStruct. + * + * Returns: + * SK_PNMI_ERR_XXX. The codes are described in the calling functions. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +PNMI_STATIC int PnmiStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* PRESET/SET action to be performed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* Length of pBuf management data buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int TableIndex; + unsigned int DstOffset; + unsigned int Len; + unsigned int InstanceNo; + unsigned int InstanceCnt; + SK_U32 Instance; + SK_U32 Id; + + + /* Check if the passed buffer has the right size */ + if (*pLen < SK_PNMI_STRUCT_SIZE) { + + /* Check if we can return the error within the buffer */ + if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { + + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, + (SK_U32)(-1)); + } + + *pLen = SK_PNMI_STRUCT_SIZE; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Check NetIndex */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + SK_PNMI_CHECKFLAGS("PnmiStruct: On call"); + + /* + * Update the values of RLMT and SIRQ and increment semaphores to + * indicate that an update was already done. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + pAC->Pnmi.RlmtUpdatedFlag ++; + pAC->Pnmi.SirqUpdatedFlag ++; + + /* Preset/Set values */ + for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { + + if ((IdTable[TableIndex].Access != SK_PNMI_RW) && + (IdTable[TableIndex].Access != SK_PNMI_WO)) { + + continue; + } + + InstanceNo = IdTable[TableIndex].InstanceNo; + Id = IdTable[TableIndex].Id; + + for (InstanceCnt = 1; InstanceCnt <= InstanceNo; + InstanceCnt ++) { + + DstOffset = IdTable[TableIndex].Offset + + (InstanceCnt - 1) * + IdTable[TableIndex].StructSize; + + /* + * Because VPD multiple instance variables are + * not setable we do not need to evaluate VPD + * instances. Have a look to VPD instance + * calculation in SkPnmiGetStruct(). + */ + Instance = (SK_U32)InstanceCnt; + + /* + * Evaluate needed buffer length + */ + Len = 0; + Ret = IdTable[TableIndex].Func(pAC, IoC, + SK_PNMI_GET, IdTable[TableIndex].Id, + NULL, &Len, Instance, TableIndex, NetIndex); + + if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { + + break; + } + if (Ret != SK_PNMI_ERR_TOO_SHORT) { + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, + SK_PNMI_ERR_GENERAL, DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_GENERAL); + } + if (Id == OID_SKGE_VPD_ACTION) { + + switch (*(pBuf + DstOffset)) { + + case SK_PNMI_VPD_CREATE: + Len = 3 + *(pBuf + DstOffset + 3); + break; + + case SK_PNMI_VPD_DELETE: + Len = 3; + break; + + default: + Len = 1; + break; + } + } + + /* Call the OID handler function */ + Ret = IdTable[TableIndex].Func(pAC, IoC, Action, + IdTable[TableIndex].Id, pBuf + DstOffset, + &Len, Instance, TableIndex, NetIndex); + + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE, + DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_BAD_VALUE); + } + } + } + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * LookupId - Lookup an OID in the IdTable + * + * Description: + * Scans the IdTable to find the table entry of an OID. + * + * Returns: + * The table index or -1 if not found. + */ +PNMI_STATIC int LookupId( +SK_U32 Id) /* Object identifier to be searched */ +{ + int i; + + for (i = 0; i < ID_TABLE_SIZE; i++) { + + if (IdTable[i].Id == Id) { + + return i; + } + } + + return (-1); +} + +/***************************************************************************** + * + * OidStruct - Handler of OID_SKGE_ALL_DATA + * + * Description: + * This OID performs a Get/Preset/SetStruct call and returns all data + * in a SK_PNMI_STRUCT_DATA structure. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int OidStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + if (Id != OID_SKGE_ALL_DATA) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003, + SK_PNMI_ERR003MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + switch (Action) { + + case SK_PNMI_GET: + return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + + case SK_PNMI_PRESET: + return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + + case SK_PNMI_SET: + return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + } + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); +} + +/***************************************************************************** + * + * Perform - OID handler of OID_SKGE_ACTION + * + * Description: + * None. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Perform( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + SK_U32 ActionOp; + + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Check if a get should be performed */ + if (Action == SK_PNMI_GET) { + + /* A get is easy. We always return the same value */ + ActionOp = (SK_U32)SK_PNMI_ACT_IDLE; + SK_PNMI_STORE_U32(pBuf, ActionOp); + *pLen = sizeof(SK_U32); + + return (SK_PNMI_ERR_OK); + } + + /* Continue with PRESET/SET action */ + if (*pLen > sizeof(SK_U32)) { + + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* Check if the command is a known one */ + SK_PNMI_READ_U32(pBuf, ActionOp); + if (*pLen > sizeof(SK_U32) || + (ActionOp != SK_PNMI_ACT_IDLE && + ActionOp != SK_PNMI_ACT_RESET && + ActionOp != SK_PNMI_ACT_SELFTEST && + ActionOp != SK_PNMI_ACT_RESETCNT)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + switch (ActionOp) { + + case SK_PNMI_ACT_IDLE: + /* Nothing to do */ + break; + + case SK_PNMI_ACT_RESET: + /* + * Perform a driver reset or something that comes near + * to this. + */ + Ret = SK_DRIVER_RESET(pAC, IoC); + if (Ret != 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005, + SK_PNMI_ERR005MSG); + + return (SK_PNMI_ERR_GENERAL); + } + break; + + case SK_PNMI_ACT_SELFTEST: + /* + * Perform a driver selftest or something similar to this. + * Currently this feature is not used and will probably + * implemented in another way. + */ + Ret = SK_DRIVER_SELFTEST(pAC, IoC); + pAC->Pnmi.TestResult = Ret; + break; + + case SK_PNMI_ACT_RESETCNT: + /* Set all counters and timestamps to zero */ + ResetCounter(pAC, IoC, NetIndex); + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006, + SK_PNMI_ERR006MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX + * + * Description: + * Retrieves the statistic values of the virtual port (logical + * index 0). Only special OIDs of NDIS are handled which consist + * of a 32 bit instead of a 64 bit value. The OIDs are public + * because perhaps some other platform can use them too. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Mac8023Stat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + SK_U64 StatVal; + SK_U32 StatVal32; + SK_BOOL Is64BitReq = SK_FALSE; + + /* + * Only the active Mac is returned + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check action type + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + switch (Id) { + + case OID_802_3_PERMANENT_ADDRESS: + case OID_802_3_CURRENT_ADDRESS: + if (*pLen < sizeof(SK_MAC_ADDR)) { + + *pLen = sizeof(SK_MAC_ADDR); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: +#ifndef SK_NDIS_64BIT_CTR + if (*pLen < sizeof(SK_U32)) { + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + +#else /* SK_NDIS_64BIT_CTR */ + + /* for compatibility, at least 32bit are required for OID */ + if (*pLen < sizeof(SK_U32)) { + /* + * but indicate handling for 64bit values, + * if insufficient space is provided + */ + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; +#endif /* SK_NDIS_64BIT_CTR */ + break; + } + + /* + * Update all statistics, because we retrieve virtual MAC, which + * consists of multiple physical statistics and increment semaphore + * to indicate that an update was already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if ( Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Get value (MAC Index 0 identifies the virtual MAC) + */ + switch (Id) { + + case OID_802_3_PERMANENT_ADDRESS: + CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress); + *pLen = sizeof(SK_MAC_ADDR); + break; + + case OID_802_3_CURRENT_ADDRESS: + CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress); + *pLen = sizeof(SK_MAC_ADDR); + break; + + default: + StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex); + + /* by default 32bit values are evaluated */ + if (!Is64BitReq) { + StatVal32 = (SK_U32)StatVal; + SK_PNMI_STORE_U32(pBuf, StatVal32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, StatVal); + *pLen = sizeof(SK_U64); + } + break; + } + + pAC->Pnmi.MacUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX + * + * Description: + * Retrieves the MAC statistic data. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int MacPrivateStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int LogPortMax; + unsigned int LogPortIndex; + unsigned int PhysPortMax; + unsigned int Limit; + unsigned int Offset; + int MacType; + int Ret; + SK_U64 StatVal; + + + + /* Calculate instance if wished. MAC index 0 is the virtual MAC */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + MacType = pAC->GIni.GIMacType; + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* Check action */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Update MAC statistic and increment semaphore to indicate that + * an update was already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* Get value */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + +/* XXX not yet implemented due to XMAC problems + case OID_SKGE_STAT_TX_UTIL: + return (SK_PNMI_ERR_GENERAL); +*/ +/* XXX not yet implemented due to XMAC problems + case OID_SKGE_STAT_RX_UTIL: + return (SK_PNMI_ERR_GENERAL); +*/ + case OID_SKGE_STAT_RX: + if (MacType == SK_MAC_GMAC) { + StatVal = + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_BROADCAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_MULTICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_UNICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_UNDERSIZE, NetIndex); + } + else { + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + } + break; + + case OID_SKGE_STAT_TX: + if (MacType == SK_MAC_GMAC) { + StatVal = + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_BROADCAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_MULTICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_UNICAST, NetIndex); + } + else { + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + } + break; + + default: + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + } + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + + Offset += sizeof(SK_U64); + } + *pLen = Offset; + + pAC->Pnmi.MacUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR + * + * Description: + * Get/Presets/Sets the current and factory MAC address. The MAC + * address of the virtual port, which is reported to the OS, may + * not be changed, but the physical ones. A set to the virtual port + * will be ignored. No error should be reported because otherwise + * a multiple instance set (-1) would always fail. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Addr( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int LogPortMax; + unsigned int PhysPortMax; + unsigned int LogPortIndex; + unsigned int PhysPortIndex; + unsigned int Limit; + unsigned int Offset = 0; + + /* + * Calculate instance if wished. MAC index 0 is the virtual + * MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* + * Perform Action + */ + if (Action == SK_PNMI_GET) { + + /* Check length */ + if (*pLen < (Limit - LogPortIndex) * 6) { + + *pLen = (Limit - LogPortIndex) * 6; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get value + */ + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_PHYS_CUR_ADDR: + if (LogPortIndex == 0) { + CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress); + } + else { + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); + + CopyMac(pBuf + Offset, + &pAC->Addr.Port[PhysPortIndex].CurrentMacAddress); + } + Offset += 6; + break; + + case OID_SKGE_PHYS_FAC_ADDR: + if (LogPortIndex == 0) { + CopyMac(pBuf + Offset, + &pAC->Addr.Net[NetIndex].PermanentMacAddress); + } + else { + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + CopyMac(pBuf + Offset, + &pAC->Addr.Port[PhysPortIndex].PermanentMacAddress); + } + Offset += 6; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008, + SK_PNMI_ERR008MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + *pLen = Offset; + } + else { + /* + * The logical MAC address may not be changed only + * the physical ones + */ + if (Id == OID_SKGE_PHYS_FAC_ADDR) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Only the current address may be changed + */ + if (Id != OID_SKGE_PHYS_CUR_ADDR) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009, + SK_PNMI_ERR009MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Check length */ + if (*pLen < (Limit - LogPortIndex) * 6) { + + *pLen = (Limit - LogPortIndex) * 6; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen > (Limit - LogPortIndex) * 6) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* + * Check Action + */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + + /* + * Set OID_SKGE_MAC_CUR_ADDR + */ + for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) { + + /* + * A set to virtual port and set of broadcast + * address will be ignored + */ + if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset, + "\xff\xff\xff\xff\xff\xff", 6) == 0) { + + continue; + } + + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, + LogPortIndex); + + Ret = SkAddrOverride(pAC, IoC, PhysPortIndex, + (SK_MAC_ADDR *)(pBuf + Offset), + (LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS : + SK_ADDR_PHYSICAL_ADDRESS)); + if (Ret != SK_ADDR_OVERRIDE_SUCCESS) { + + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX + * + * Description: + * Retrieves the statistic values of the CSUM module. The CSUM data + * structure must be available in the SK_AC even if the CSUM module + * is not included, because PNMI reads the statistic data from the + * CSUM part of SK_AC directly. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int CsumStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int Index; + unsigned int Limit; + unsigned int Offset = 0; + SK_U64 StatVal; + + + /* + * Calculate instance if wished + */ + if (Instance != (SK_U32)(-1)) { + + if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + Index = (unsigned int)Instance - 1; + Limit = Index + 1; + } + else { + Index = 0; + Limit = SKCS_NUM_PROTOCOLS; + } + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + if (*pLen < (Limit - Index) * sizeof(SK_U64)) { + + *pLen = (Limit - Index) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get value + */ + for (; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_CHKSM_RX_OK_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts; + break; + + case OID_SKGE_CHKSM_RX_UNABLE_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts; + break; + + case OID_SKGE_CHKSM_RX_ERR_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts; + break; + + case OID_SKGE_CHKSM_TX_OK_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts; + break; + + case OID_SKGE_CHKSM_TX_UNABLE_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010, + SK_PNMI_ERR010MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + Offset += sizeof(SK_U64); + } + + /* + * Store used buffer space + */ + *pLen = Offset; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX + * + * Description: + * Retrieves the statistic values of the I2C module, which handles + * the temperature and voltage sensors. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int SensorStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int i; + unsigned int Index; + unsigned int Limit; + unsigned int Offset; + unsigned int Len; + SK_U32 Val32; + SK_U64 Val64; + + + /* + * Calculate instance if wished + */ + if ((Instance != (SK_U32)(-1))) { + + if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + Index = (unsigned int)Instance -1; + Limit = (unsigned int)Instance; + } + else { + Index = 0; + Limit = (unsigned int) pAC->I2c.MaxSens; + } + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + switch (Id) { + + case OID_SKGE_SENSOR_VALUE: + case OID_SKGE_SENSOR_WAR_THRES_LOW: + case OID_SKGE_SENSOR_WAR_THRES_UPP: + case OID_SKGE_SENSOR_ERR_THRES_LOW: + case OID_SKGE_SENSOR_ERR_THRES_UPP: + if (*pLen < (Limit - Index) * sizeof(SK_U32)) { + + *pLen = (Limit - Index) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_DESCR: + for (Offset = 0, i = Index; i < Limit; i ++) { + + Len = (unsigned int) + SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1; + if (Len >= SK_PNMI_STRINGLEN2) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011, + SK_PNMI_ERR011MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + Offset += Len; + } + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_INDEX: + case OID_SKGE_SENSOR_TYPE: + case OID_SKGE_SENSOR_STATUS: + if (*pLen < Limit - Index) { + + *pLen = Limit - Index; + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_WAR_CTS: + case OID_SKGE_SENSOR_WAR_TIME: + case OID_SKGE_SENSOR_ERR_CTS: + case OID_SKGE_SENSOR_ERR_TIME: + if (*pLen < (Limit - Index) * sizeof(SK_U64)) { + + *pLen = (Limit - Index) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012, + SK_PNMI_ERR012MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + + } + + /* + * Get value + */ + for (Offset = 0; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_SENSOR_INDEX: + *(pBuf + Offset) = (char)Index; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_DESCR: + Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc); + SK_MEMCPY(pBuf + Offset + 1, + pAC->I2c.SenTable[Index].SenDesc, Len); + *(pBuf + Offset) = (char)Len; + Offset += Len + 1; + break; + + case OID_SKGE_SENSOR_TYPE: + *(pBuf + Offset) = + (char)pAC->I2c.SenTable[Index].SenType; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_VALUE: + Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_WAR_THRES_LOW: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreWarnLow; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_WAR_THRES_UPP: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreWarnHigh; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_ERR_THRES_LOW: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreErrLow; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_ERR_THRES_UPP: + Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_STATUS: + *(pBuf + Offset) = + (char)pAC->I2c.SenTable[Index].SenErrFlag; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_WAR_CTS: + Val64 = pAC->I2c.SenTable[Index].SenWarnCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_ERR_CTS: + Val64 = pAC->I2c.SenTable[Index].SenErrCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_WAR_TIME: + Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. + SenBegWarnTS); + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_ERR_TIME: + Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. + SenBegErrTS); + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("SensorStat: Unknown OID should be handled before")); + + return (SK_PNMI_ERR_GENERAL); + } + } + + /* + * Store used buffer space + */ + *pLen = Offset; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Vpd - OID handler function of OID_SKGE_VPD_XXX + * + * Description: + * Get/preset/set of VPD data. As instance the name of a VPD key + * can be passed. The Instance parameter is a SK_U32 and can be + * used as a string buffer for the VPD key, because their maximum + * length is 4 byte. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Vpd( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_VPD_STATUS *pVpdStatus; + unsigned int BufLen; + char Buf[256]; + char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; + char KeyStr[SK_PNMI_VPD_KEY_SIZE]; + unsigned int KeyNo; + unsigned int Offset; + unsigned int Index; + unsigned int FirstIndex; + unsigned int LastIndex; + unsigned int Len; + int Ret; + SK_U32 Val32; + + /* + * Get array of all currently stored VPD keys + */ + Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &KeyNo); + if (Ret != SK_PNMI_ERR_OK) { + *pLen = 0; + return (Ret); + } + + /* + * If instance is not -1, try to find the requested VPD key for + * the multiple instance variables. The other OIDs as for example + * OID VPD_ACTION are single instance variables and must be + * handled separatly. + */ + FirstIndex = 0; + LastIndex = KeyNo; + + if ((Instance != (SK_U32)(-1))) { + + if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE || + Id == OID_SKGE_VPD_ACCESS) { + + SK_STRNCPY(KeyStr, (char *)&Instance, 4); + KeyStr[4] = 0; + + for (Index = 0; Index < KeyNo; Index ++) { + + if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { + FirstIndex = Index; + LastIndex = Index+1; + break; + } + } + if (Index == KeyNo) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + } + else if (Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + } + + /* + * Get value, if a query should be performed + */ + if (Action == SK_PNMI_GET) { + + switch (Id) { + + case OID_SKGE_VPD_FREE_BYTES: + /* Check length of buffer */ + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Get number of free bytes */ + pVpdStatus = VpdStat(pAC, IoC); + if (pVpdStatus == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017, + SK_PNMI_ERR017MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + if ((pVpdStatus->vpd_status & VPD_VALID) == 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018, + SK_PNMI_ERR018MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Val32 = (SK_U32)pVpdStatus->vpd_free_rw; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VPD_ENTRIES_LIST: + /* Check length */ + for (Len = 0, Index = 0; Index < KeyNo; Index ++) { + + Len += SK_STRLEN(KeyArr[Index]) + 1; + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Get value */ + *(pBuf) = (char)Len - 1; + for (Offset = 1, Index = 0; Index < KeyNo; Index ++) { + + Len = SK_STRLEN(KeyArr[Index]); + SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len); + + Offset += Len; + + if (Index < KeyNo - 1) { + + *(pBuf + Offset) = ' '; + Offset ++; + } + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ENTRIES_NUMBER: + /* Check length */ + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Val32 = (SK_U32)KeyNo; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VPD_KEY: + /* Check buffer length, if it is large enough */ + for (Len = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + Len += SK_STRLEN(KeyArr[Index]) + 1; + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get the key to an intermediate buffer, because + * we have to prepend a length byte. + */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + Len = SK_STRLEN(KeyArr[Index]); + + *(pBuf + Offset) = (char)Len; + SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index], + Len); + Offset += Len + 1; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_VALUE: + /* Check the buffer length if it is large enough */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + BufLen = 256; + if (VpdRead(pAC, IoC, KeyArr[Index], Buf, + (int *)&BufLen) > 0 || + BufLen >= SK_PNMI_VPD_DATALEN) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR021, + SK_PNMI_ERR021MSG); + + return (SK_PNMI_ERR_GENERAL); + } + Offset += BufLen + 1; + } + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get the value to an intermediate buffer, because + * we have to prepend a length byte. + */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + BufLen = 256; + if (VpdRead(pAC, IoC, KeyArr[Index], Buf, + (int *)&BufLen) > 0 || + BufLen >= SK_PNMI_VPD_DATALEN) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR022, + SK_PNMI_ERR022MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + *(pBuf + Offset) = (char)BufLen; + SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen); + Offset += BufLen + 1; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ACCESS: + if (*pLen < LastIndex - FirstIndex) { + + *pLen = LastIndex - FirstIndex; + return (SK_PNMI_ERR_TOO_SHORT); + } + + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + if (VpdMayWrite(KeyArr[Index])) { + + *(pBuf + Offset) = SK_PNMI_VPD_RW; + } + else { + *(pBuf + Offset) = SK_PNMI_VPD_RO; + } + Offset ++; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ACTION: + Offset = LastIndex - FirstIndex; + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + SK_MEMSET(pBuf, 0, Offset); + *pLen = Offset; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023, + SK_PNMI_ERR023MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + else { + /* The only OID which can be set is VPD_ACTION */ + if (Id != OID_SKGE_VPD_ACTION) { + + if (Id == OID_SKGE_VPD_FREE_BYTES || + Id == OID_SKGE_VPD_ENTRIES_LIST || + Id == OID_SKGE_VPD_ENTRIES_NUMBER || + Id == OID_SKGE_VPD_KEY || + Id == OID_SKGE_VPD_VALUE || + Id == OID_SKGE_VPD_ACCESS) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024, + SK_PNMI_ERR024MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * From this point we handle VPD_ACTION. Check the buffer + * length. It should at least have the size of one byte. + */ + if (*pLen < 1) { + + *pLen = 1; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * The first byte contains the VPD action type we should + * perform. + */ + switch (*pBuf) { + + case SK_PNMI_VPD_IGNORE: + /* Nothing to do */ + break; + + case SK_PNMI_VPD_CREATE: + /* + * We have to create a new VPD entry or we modify + * an existing one. Check first the buffer length. + */ + if (*pLen < 4) { + + *pLen = 4; + return (SK_PNMI_ERR_TOO_SHORT); + } + KeyStr[0] = pBuf[1]; + KeyStr[1] = pBuf[2]; + KeyStr[2] = 0; + + /* + * Is the entry writable or does it belong to the + * read-only area? + */ + if (!VpdMayWrite(KeyStr)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + Offset = (int)pBuf[3] & 0xFF; + + SK_MEMCPY(Buf, pBuf + 4, Offset); + Buf[Offset] = 0; + + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + /* Write the new entry or modify an existing one */ + Ret = VpdWrite(pAC, IoC, KeyStr, Buf); + if (Ret == SK_PNMI_VPD_NOWRITE ) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + else if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025, + SK_PNMI_ERR025MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform an update of the VPD data. This is + * not mandantory, but just to be sure. + */ + Ret = VpdUpdate(pAC, IoC); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026, + SK_PNMI_ERR026MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case SK_PNMI_VPD_DELETE: + /* Check if the buffer size is plausible */ + if (*pLen < 3) { + + *pLen = 3; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen > 3) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + KeyStr[0] = pBuf[1]; + KeyStr[1] = pBuf[2]; + KeyStr[2] = 0; + + /* Find the passed key in the array */ + for (Index = 0; Index < KeyNo; Index ++) { + + if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { + + break; + } + } + /* + * If we cannot find the key it is wrong, so we + * return an appropriate error value. + */ + if (Index == KeyNo) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + /* Ok, you wanted it and you will get it */ + Ret = VpdDelete(pAC, IoC, KeyStr); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027, + SK_PNMI_ERR027MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform an update of the VPD data. This is + * not mandantory, but just to be sure. + */ + Ret = VpdUpdate(pAC, IoC); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028, + SK_PNMI_ERR028MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * General - OID handler function of various single instance OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int General( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int Index; + unsigned int Len; + unsigned int Offset; + unsigned int Val; + SK_U8 Val8; + SK_U16 Val16; + SK_U32 Val32; + SK_U64 Val64; + SK_U64 Val64RxHwErrs = 0; + SK_U64 Val64TxHwErrs = 0; + SK_BOOL Is64BitReq = SK_FALSE; + char Buf[256]; + int MacType; + + /* + * Check instance. We only handle single instance variables. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check action. We only allow get requests. + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + MacType = pAC->GIni.GIMacType; + + /* + * Check length for the various supported OIDs + */ + switch (Id) { + + case OID_GEN_XMIT_ERROR: + case OID_GEN_RCV_ERROR: + case OID_GEN_RCV_NO_BUFFER: +#ifndef SK_NDIS_64BIT_CTR + if (*pLen < sizeof(SK_U32)) { + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + +#else /* SK_NDIS_64BIT_CTR */ + + /* + * for compatibility, at least 32bit are required for oid + */ + if (*pLen < sizeof(SK_U32)) { + /* + * but indicate handling for 64bit values, + * if insufficient space is provided + */ + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; +#endif /* SK_NDIS_64BIT_CTR */ + break; + + case OID_SKGE_PORT_NUMBER: + case OID_SKGE_DEVICE_TYPE: + case OID_SKGE_RESULT: + case OID_SKGE_RLMT_MONITOR_NUMBER: + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + case OID_SKGE_TRAP_NUMBER: + case OID_SKGE_MDB_VERSION: + case OID_SKGE_BOARDLEVEL: + case OID_SKGE_CHIPID: + case OID_SKGE_RAMSIZE: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_CHIPSET: + if (*pLen < sizeof(SK_U16)) { + + *pLen = sizeof(SK_U16); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_BUS_TYPE: + case OID_SKGE_BUS_SPEED: + case OID_SKGE_BUS_WIDTH: + case OID_SKGE_SENSOR_NUMBER: + case OID_SKGE_CHKSM_NUMBER: + case OID_SKGE_VAUXAVAIL: + if (*pLen < sizeof(SK_U8)) { + + *pLen = sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_TX_SW_QUEUE_LEN: + case OID_SKGE_TX_SW_QUEUE_MAX: + case OID_SKGE_TX_RETRY: + case OID_SKGE_RX_INTR_CTS: + case OID_SKGE_TX_INTR_CTS: + case OID_SKGE_RX_NO_BUF_CTS: + case OID_SKGE_TX_NO_BUF_CTS: + case OID_SKGE_TX_USED_DESCR_NO: + case OID_SKGE_RX_DELIVERED_CTS: + case OID_SKGE_RX_OCTETS_DELIV_CTS: + case OID_SKGE_RX_HW_ERROR_CTS: + case OID_SKGE_TX_HW_ERROR_CTS: + case OID_SKGE_IN_ERRORS_CTS: + case OID_SKGE_OUT_ERROR_CTS: + case OID_SKGE_ERR_RECOVERY_CTS: + case OID_SKGE_SYSUPTIME: + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + /* Checked later */ + break; + } + + /* Update statistic */ + if (Id == OID_SKGE_RX_HW_ERROR_CTS || + Id == OID_SKGE_TX_HW_ERROR_CTS || + Id == OID_SKGE_IN_ERRORS_CTS || + Id == OID_SKGE_OUT_ERROR_CTS || + Id == OID_GEN_XMIT_ERROR || + Id == OID_GEN_RCV_ERROR) { + + /* Force the XMAC to update its statistic counters and + * Increment semaphore to indicate that an update was + * already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Some OIDs consist of multiple hardware counters. Those + * values which are contained in all of them will be added + * now. + */ + switch (Id) { + + case OID_SKGE_RX_HW_ERROR_CTS: + case OID_SKGE_IN_ERRORS_CTS: + case OID_GEN_RCV_ERROR: + Val64RxHwErrs = + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex); + break; + + case OID_SKGE_TX_HW_ERROR_CTS: + case OID_SKGE_OUT_ERROR_CTS: + case OID_GEN_XMIT_ERROR: + Val64TxHwErrs = + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex); + break; + } + } + + /* + * Retrieve value + */ + switch (Id) { + + case OID_SKGE_SUPPORTED_LIST: + Len = ID_TABLE_SIZE * sizeof(SK_U32); + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + for (Offset = 0, Index = 0; Offset < Len; + Offset += sizeof(SK_U32), Index ++) { + + Val32 = (SK_U32)IdTable[Index].Id; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + } + *pLen = Len; + break; + + case OID_SKGE_BOARDLEVEL: + Val32 = (SK_U32)pAC->GIni.GILevel; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_PORT_NUMBER: + Val32 = (SK_U32)pAC->GIni.GIMacsFound; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_DEVICE_TYPE: + Val32 = (SK_U32)pAC->Pnmi.DeviceType; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_DRIVER_DESCR: + if (pAC->Pnmi.pDriverDescription == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007, + SK_PNMI_ERR007MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029, + SK_PNMI_ERR029MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_VERSION: + if (pAC->Pnmi.pDriverVersion == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR030MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR031MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_RELDATE: + if (pAC->Pnmi.pDriverReleaseDate == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR053MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverReleaseDate) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR054MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverReleaseDate, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_FILENAME: + if (pAC->Pnmi.pDriverFileName == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR055MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverFileName) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR056MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverFileName, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_HW_DESCR: + /* + * The hardware description is located in the VPD. This + * query may move to the initialisation routine. But + * the VPD data is cached and therefore a call here + * will not make much difference. + */ + Len = 256; + if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032, + SK_PNMI_ERR032MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + Len ++; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033, + SK_PNMI_ERR033MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, Buf, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_HW_VERSION: + /* Oh, I love to do some string manipulation */ + if (*pLen < 5) { + + *pLen = 5; + return (SK_PNMI_ERR_TOO_SHORT); + } + Val8 = (SK_U8)pAC->GIni.GIPciHwRev; + pBuf[0] = 4; + pBuf[1] = 'v'; + pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F)); + pBuf[3] = '.'; + pBuf[4] = (char)(0x30 | (Val8 & 0x0F)); + *pLen = 5; + break; + + case OID_SKGE_CHIPSET: + Val16 = pAC->Pnmi.Chipset; + SK_PNMI_STORE_U16(pBuf, Val16); + *pLen = sizeof(SK_U16); + break; + + case OID_SKGE_CHIPID: + Val32 = pAC->GIni.GIChipId; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_RAMSIZE: + Val32 = pAC->GIni.GIRamSize; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VAUXAVAIL: + *pBuf = (char) pAC->GIni.GIVauxAvail; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_TYPE: + *pBuf = (char) SK_PNMI_BUS_PCI; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_SPEED: + *pBuf = pAC->Pnmi.PciBusSpeed; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_WIDTH: + *pBuf = pAC->Pnmi.PciBusWidth; + *pLen = sizeof(char); + break; + + case OID_SKGE_RESULT: + Val32 = pAC->Pnmi.TestResult; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_NUMBER: + *pBuf = (char)pAC->I2c.MaxSens; + *pLen = sizeof(char); + break; + + case OID_SKGE_CHKSM_NUMBER: + *pBuf = SKCS_NUM_PROTOCOLS; + *pLen = sizeof(char); + break; + + case OID_SKGE_TRAP_NUMBER: + GetTrapQueueLen(pAC, &Len, &Val); + Val32 = (SK_U32)Val; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_TRAP: + GetTrapQueueLen(pAC, &Len, &Val); + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + CopyTrapQueue(pAC, pBuf); + *pLen = Len; + break; + + case OID_SKGE_RLMT_MONITOR_NUMBER: +/* XXX Not yet implemented by RLMT therefore we return zero elements */ + Val32 = 0; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_TX_SW_QUEUE_LEN: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen + + pAC->Pnmi.BufPort[1].TxSwQueueLen; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxSwQueueLen + + pAC->Pnmi.Port[1].TxSwQueueLen; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + + case OID_SKGE_TX_SW_QUEUE_MAX: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax + + pAC->Pnmi.BufPort[1].TxSwQueueMax; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxSwQueueMax + + pAC->Pnmi.Port[1].TxSwQueueMax; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_RETRY: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxRetryCts + + pAC->Pnmi.BufPort[1].TxRetryCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxRetryCts + + pAC->Pnmi.Port[1].TxRetryCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_INTR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxIntrCts + + pAC->Pnmi.BufPort[1].RxIntrCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxIntrCts + + pAC->Pnmi.Port[1].RxIntrCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_INTR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxIntrCts + + pAC->Pnmi.BufPort[1].TxIntrCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxIntrCts + + pAC->Pnmi.Port[1].TxIntrCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_NO_BUF_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts + + pAC->Pnmi.BufPort[1].RxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxNoBufCts + + pAC->Pnmi.Port[1].RxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_NO_BUF_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts + + pAC->Pnmi.BufPort[1].TxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxNoBufCts + + pAC->Pnmi.Port[1].TxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_USED_DESCR_NO: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo + + pAC->Pnmi.BufPort[1].TxUsedDescrNo; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo + + pAC->Pnmi.Port[1].TxUsedDescrNo; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_DELIVERED_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts + + pAC->Pnmi.BufPort[1].RxDeliveredCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxDeliveredCts + + pAC->Pnmi.Port[1].RxDeliveredCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_OCTETS_DELIV_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts + + pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts + + pAC->Pnmi.Port[1].RxOctetsDeliveredCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_HW_ERROR_CTS: + SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_HW_ERROR_CTS: + SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_IN_ERRORS_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64RxHwErrs + + pAC->Pnmi.BufPort[0].RxNoBufCts + + pAC->Pnmi.BufPort[1].RxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64RxHwErrs + + pAC->Pnmi.Port[0].RxNoBufCts + + pAC->Pnmi.Port[1].RxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_OUT_ERROR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64TxHwErrs + + pAC->Pnmi.BufPort[0].TxNoBufCts + + pAC->Pnmi.BufPort[1].TxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64TxHwErrs + + pAC->Pnmi.Port[0].TxNoBufCts + + pAC->Pnmi.Port[1].TxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_ERR_RECOVERY_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts + + pAC->Pnmi.BufPort[1].ErrRecoveryCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts + + pAC->Pnmi.Port[1].ErrRecoveryCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_SYSUPTIME: + Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + Val64 -= pAC->Pnmi.StartUpTime; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_MDB_VERSION: + Val32 = SK_PNMI_MDB_VERSION; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_GEN_RCV_ERROR: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + else { + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_XMIT_ERROR: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + else { + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_RCV_NO_BUFFER: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + else { + Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034, + SK_PNMI_ERR034MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (Id == OID_SKGE_RX_HW_ERROR_CTS || + Id == OID_SKGE_TX_HW_ERROR_CTS || + Id == OID_SKGE_IN_ERRORS_CTS || + Id == OID_SKGE_OUT_ERROR_CTS || + Id == OID_GEN_XMIT_ERROR || + Id == OID_GEN_RCV_ERROR) { + + pAC->Pnmi.MacUpdatedFlag --; + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance. + * + * Description: + * Get/Presets/Sets the RLMT OIDs. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Rlmt( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int PhysPortIndex; + unsigned int PhysPortMax; + SK_EVPARA EventParam; + SK_U32 Val32; + SK_U64 Val64; + + + /* + * Check instance. Only single instance OIDs are allowed here. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Perform the requested action. + */ + if (Action == SK_PNMI_GET) { + + /* + * Check if the buffer length is large enough. + */ + + switch (Id) { + + case OID_SKGE_RLMT_MODE: + case OID_SKGE_RLMT_PORT_ACTIVE: + case OID_SKGE_RLMT_PORT_PREFERRED: + if (*pLen < sizeof(SK_U8)) { + + *pLen = sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_PORT_NUMBER: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_CHANGE_CTS: + case OID_SKGE_RLMT_CHANGE_TIME: + case OID_SKGE_RLMT_CHANGE_ESTIM: + case OID_SKGE_RLMT_CHANGE_THRES: + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035, + SK_PNMI_ERR035MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Update RLMT statistic and increment semaphores to indicate + * that an update was already done. Maybe RLMT will hold its + * statistic always up to date some time. Then we can + * remove this type of call. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.RlmtUpdatedFlag ++; + + /* + * Retrieve Value + */ + switch (Id) { + + case OID_SKGE_RLMT_MODE: + *pBuf = (char)pAC->Rlmt.Net[0].RlmtMode; + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_PORT_NUMBER: + Val32 = (SK_U32)pAC->GIni.GIMacsFound; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_PORT_ACTIVE: + *pBuf = 0; + /* + * If multiple ports may become active this OID + * doesn't make sense any more. A new variable in + * the port structure should be created. However, + * for this variable the first active port is + * returned. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex); + break; + } + } + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_PORT_PREFERRED: + *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference); + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_CHANGE_CTS: + Val64 = pAC->Pnmi.RlmtChangeCts; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_TIME: + Val64 = pAC->Pnmi.RlmtChangeTime; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_ESTIM: + Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_THRES: + Val64 = pAC->Pnmi.RlmtChangeThreshold; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("Rlmt: Unknown OID should be handled before")); + + pAC->Pnmi.RlmtUpdatedFlag --; + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + pAC->Pnmi.RlmtUpdatedFlag --; + } + else { + /* Perform a preset or set */ + switch (Id) { + + case OID_SKGE_RLMT_MODE: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(char)) { + + *pLen = sizeof(char); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Check if the value range is correct */ + if (*pLen != sizeof(char) || + (*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 || + *(SK_U8 *)pBuf > 15) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + /* Send an event to RLMT to change the mode */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] |= (SK_U32)(*pBuf); + EventParam.Para32[1] = 0; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037, + SK_PNMI_ERR037MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case OID_SKGE_RLMT_PORT_PREFERRED: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(char)) { + + *pLen = sizeof(char); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Check if the value range is correct */ + if (*pLen != sizeof(char) || *(SK_U8 *)pBuf > + (SK_U8)pAC->GIni.GIMacsFound) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + + /* + * Send an event to RLMT change the preferred port. + * A param of -1 means automatic mode. RLMT will + * make the decision which is the preferred port. + */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = (SK_U32)(*pBuf) - 1; + EventParam.Para32[1] = NetIndex; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038, + SK_PNMI_ERR038MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case OID_SKGE_RLMT_CHANGE_THRES: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* + * There are not many restrictions to the + * value range. + */ + if (*pLen != sizeof(SK_U64)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + /* + * Store the new threshold, which will be taken + * on the next timer event. + */ + SK_PNMI_READ_U64(pBuf, Val64); + pAC->Pnmi.RlmtChangeThreshold = Val64; + break; + + default: + /* The other OIDs are not be able for set */ + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance. + * + * Description: + * Performs get requests on multiple instance variables. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int RlmtStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + unsigned int Limit; + unsigned int Offset; + int Ret; + SK_U32 Val32; + SK_U64 Val64; + + /* + * Calculate the port indexes from the instance. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + + if ((Instance != (SK_U32)(-1))) { + /* Check instance range */ + if ((Instance < 1) || (Instance > PhysPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* Single net mode */ + PhysPortIndex = Instance - 1; + + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + } + + /* Both net modes */ + Limit = PhysPortIndex + 1; + } + else { + /* Single net mode */ + PhysPortIndex = 0; + Limit = PhysPortMax; + + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + Limit = PhysPortIndex + 1; + } + } + + /* + * Currently only get requests are allowed. + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check if the buffer length is large enough. + */ + switch (Id) { + + case OID_SKGE_RLMT_PORT_INDEX: + case OID_SKGE_RLMT_STATUS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { + + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_TX_HELLO_CTS: + case OID_SKGE_RLMT_RX_HELLO_CTS: + case OID_SKGE_RLMT_TX_SP_REQ_CTS: + case OID_SKGE_RLMT_RX_SP_CTS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) { + + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039, + SK_PNMI_ERR039MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + + } + + /* + * Update statistic and increment semaphores to indicate that + * an update was already done. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.RlmtUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex ++) { + + switch (Id) { + + case OID_SKGE_RLMT_PORT_INDEX: + Val32 = PhysPortIndex; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_STATUS: + if (pAC->Rlmt.Port[PhysPortIndex].PortState == + SK_RLMT_PS_INIT || + pAC->Rlmt.Port[PhysPortIndex].PortState == + SK_RLMT_PS_DOWN) { + + Val32 = SK_PNMI_RLMT_STATUS_ERROR; + } + else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + Val32 = SK_PNMI_RLMT_STATUS_ACTIVE; + } + else { + Val32 = SK_PNMI_RLMT_STATUS_STANDBY; + } + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_TX_HELLO_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_RX_HELLO_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_TX_SP_REQ_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_RX_SP_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("RlmtStat: Unknown OID should be errored before")); + + pAC->Pnmi.RlmtUpdatedFlag --; + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + + pAC->Pnmi.RlmtUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacPrivateConf - OID handler function of OIDs concerning the configuration + * + * Description: + * Get/Presets/Sets the OIDs concerning the configuration. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int MacPrivateConf( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + unsigned int LogPortMax; + unsigned int LogPortIndex; + unsigned int Limit; + unsigned int Offset; + char Val8; + char *pBufPtr; + int Ret; + SK_EVPARA EventParam; + SK_U32 Val32; + + /* + * Calculate instance if wished. MAC index 0 is the virtual MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* + * Perform action + */ + if (Action == SK_PNMI_GET) { + + /* Check length */ + switch (Id) { + + case OID_SKGE_PMD: + case OID_SKGE_CONNECTOR: + case OID_SKGE_LINK_CAP: + case OID_SKGE_LINK_MODE: + case OID_SKGE_LINK_MODE_STATUS: + case OID_SKGE_LINK_STATUS: + case OID_SKGE_FLOWCTRL_CAP: + case OID_SKGE_FLOWCTRL_MODE: + case OID_SKGE_FLOWCTRL_STATUS: + case OID_SKGE_PHY_OPERATION_CAP: + case OID_SKGE_PHY_OPERATION_MODE: + case OID_SKGE_PHY_OPERATION_STATUS: + case OID_SKGE_SPEED_CAP: + case OID_SKGE_SPEED_MODE: + case OID_SKGE_SPEED_STATUS: + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_MTU: + case OID_SKGE_PHY_TYPE: + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U32)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041, + SK_PNMI_ERR041MSG); + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Update statistic and increment semaphore to indicate + * that an update was already done. + */ + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.SirqUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + pBufPtr = pBuf + Offset; + + switch (Id) { + + case OID_SKGE_PMD: + *pBufPtr = pAC->Pnmi.PMD; + Offset += sizeof(char); + break; + + case OID_SKGE_CONNECTOR: + *pBufPtr = pAC->Pnmi.Connector; + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_TYPE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + continue; + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + Val32 = pAC->GIni.GP[PhysPortIndex].PhyType; + SK_PNMI_STORE_U32(pBufPtr, Val32); + } + } + else { /* DualNetMode */ + + Val32 = pAC->GIni.GP[NetIndex].PhyType; + SK_PNMI_STORE_U32(pBufPtr, Val32); + } + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_LINK_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkModeConf; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkModeConf; + } + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_MODE_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = + CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); + } + } + else { /* DualNetMode */ + + *pBufPtr = CalculateLinkModeStatus(pAC, IoC, NetIndex); + } + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = CalculateLinkStatus(pAC, IoC, PhysPortIndex); + } + } + else { /* DualNetMode */ + + *pBufPtr = CalculateLinkStatus(pAC, IoC, NetIndex); + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlMode; + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlStatus; + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PMSCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSMode; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PMSMode; + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSStatus; + } + } + else { + + *pBufPtr = pAC->GIni.GP[NetIndex].PMSStatus; + } + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeed; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeed; + } + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedUsed; + } + Offset += sizeof(char); + break; + + case OID_SKGE_MTU: + Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex); + SK_PNMI_STORE_U32(pBufPtr, Val32); + Offset += sizeof(SK_U32); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before")); + + pAC->Pnmi.SirqUpdatedFlag --; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + pAC->Pnmi.SirqUpdatedFlag --; + + return (SK_PNMI_ERR_OK); + } + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + switch (Id) { + + case OID_SKGE_LINK_MODE: + case OID_SKGE_FLOWCTRL_MODE: + case OID_SKGE_PHY_OPERATION_MODE: + case OID_SKGE_SPEED_MODE: + if (*pLen < Limit - LogPortIndex) { + + *pLen = Limit - LogPortIndex; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != Limit - LogPortIndex) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + case OID_SKGE_MTU: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != sizeof(SK_U32)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Perform preset or set + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_LINK_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < SK_LMODE_HALF || + (LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) || + (LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new link mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_LMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR043, + SK_PNMI_ERR043MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new link mode to + * the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR043, + SK_PNMI_ERR043MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < SK_FLOW_MODE_NONE || + (LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) || + (LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new flow control mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_FLOWMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR044, + SK_PNMI_ERR044MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new flow control + * mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_FLOWMODE, EventParam) + > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR044, + SK_PNMI_ERR044MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_MODE : + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + /* mode of this port remains unchanged */ + Offset += sizeof(char); + break; + } + if (Val8 < SK_MS_MODE_AUTO || + (LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) || + (LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with new master/slave (role) mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_ROLE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR042, + SK_PNMI_ERR042MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new master/slave + * (role) mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_ROLE, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR042, + SK_PNMI_ERR042MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < (SK_LSPEED_AUTO) || + (LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) || + (LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new flow control mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_SPEED, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR045, + SK_PNMI_ERR045MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new flow control + * mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_SPEED, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR045, + SK_PNMI_ERR045MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_MTU : + /* Check the value range */ + Val32 = *(SK_U32*)(pBuf + Offset); + if (Val32 == 0) { + /* mtu of this port remains unchanged */ + Offset += sizeof(SK_U32); + break; + } + if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) { + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) { + return (SK_PNMI_ERR_GENERAL); + } + + Offset += sizeof(SK_U32); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before set")); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Monitor - OID handler function for RLMT_MONITOR_XXX + * + * Description: + * Because RLMT currently does not support the monitoring of + * remote adapter cards, we return always an empty table. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Monitor( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int Index; + unsigned int Limit; + unsigned int Offset; + unsigned int Entries; + + + /* + * Calculate instance if wished. + */ + /* XXX Not yet implemented. Return always an empty table. */ + Entries = 0; + + if ((Instance != (SK_U32)(-1))) { + + if ((Instance < 1) || (Instance > Entries)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + Index = (unsigned int)Instance - 1; + Limit = (unsigned int)Instance; + } + else { + Index = 0; + Limit = Entries; + } + + /* + * Get/Set value + */ + if (Action == SK_PNMI_GET) { + + for (Offset=0; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_RLMT_MONITOR_INDEX: + case OID_SKGE_RLMT_MONITOR_ADDR: + case OID_SKGE_RLMT_MONITOR_ERRS: + case OID_SKGE_RLMT_MONITOR_TIMESTAMP: + case OID_SKGE_RLMT_MONITOR_ADMIN: + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046, + SK_PNMI_ERR046MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + } + else { + /* Only MONITOR_ADMIN can be set */ + if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check if the length is plausible */ + if (*pLen < (Limit - Index)) { + + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Okay, we have a wide value range */ + if (*pLen != (Limit - Index)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } +/* + for (Offset=0; Index < Limit; Index ++) { + } +*/ +/* + * XXX Not yet implemented. Return always BAD_VALUE, because the table + * is empty. + */ + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * VirtualConf - Calculates the values of configuration OIDs for virtual port + * + * Description: + * We handle here the get of the configuration group OIDs, which are + * a little bit complicated. The virtual port consists of all currently + * active physical ports. If multiple ports are active and configured + * differently we get in some trouble to return a single value. So we + * get the value of the first active port and compare it with that of + * the other active ports. If they are not the same, we return a value + * that indicates that the state is indeterminated. + * + * Returns: + * Nothing + */ +PNMI_STATIC void VirtualConf( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf) /* Buffer used for the management data transfer */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + SK_U8 Val8; + SK_U32 Val32; + SK_BOOL PortActiveFlag; + SK_GEPORT *pPrt; + + *pBuf = 0; + PortActiveFlag = SK_FALSE; + PhysPortMax = pAC->GIni.GIMacsFound; + + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + /* Check if the physical port is active */ + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + continue; + } + + PortActiveFlag = SK_TRUE; + + switch (Id) { + + case OID_SKGE_PHY_TYPE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + Val32 = pPrt->PhyType; + SK_PNMI_STORE_U32(pBuf, Val32); + continue; + } + + case OID_SKGE_LINK_CAP: + + /* + * Different capabilities should not happen, but + * in the case of the cases OR them all together. + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pPrt->PLinkCap; + break; + + case OID_SKGE_LINK_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PLinkModeConf; + continue; + } + + /* + * If we find an active port with a different link + * mode than the first one we return a value that + * indicates that the link mode is indeterminated. + */ + if (*pBuf != pPrt->PLinkModeConf) { + + *pBuf = SK_LMODE_INDETERMINATED; + } + break; + + case OID_SKGE_LINK_MODE_STATUS: + /* Get the link mode of the physical port */ + Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); + + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = Val8; + continue; + } + + /* + * If we find an active port with a different link + * mode status than the first one we return a value + * that indicates that the link mode status is + * indeterminated. + */ + if (*pBuf != Val8) { + + *pBuf = SK_LMODE_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_LINK_STATUS: + /* Get the link status of the physical port */ + Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex); + + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = Val8; + continue; + } + + /* + * If we find an active port with a different link + * status than the first one, we return a value + * that indicates that the link status is + * indeterminated. + */ + if (*pBuf != Val8) { + + *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; + } + break; + + case OID_SKGE_FLOWCTRL_CAP: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PFlowCtrlCap; + continue; + } + + /* + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pPrt->PFlowCtrlCap; + break; + + case OID_SKGE_FLOWCTRL_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PFlowCtrlMode; + continue; + } + + /* + * If we find an active port with a different flow + * control mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pPrt->PFlowCtrlMode) { + + *pBuf = SK_FLOW_MODE_INDETERMINATED; + } + break; + + case OID_SKGE_FLOWCTRL_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PFlowCtrlStatus; + continue; + } + + /* + * If we find an active port with a different flow + * control status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pPrt->PFlowCtrlStatus) { + + *pBuf = SK_FLOW_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_PHY_OPERATION_CAP: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PMSCap; + continue; + } + + /* + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pPrt->PMSCap; + break; + + case OID_SKGE_PHY_OPERATION_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PMSMode; + continue; + } + + /* + * If we find an active port with a different master/ + * slave mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pPrt->PMSMode) { + + *pBuf = SK_MS_MODE_INDETERMINATED; + } + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PMSStatus; + continue; + } + + /* + * If we find an active port with a different master/ + * slave status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pPrt->PMSStatus) { + + *pBuf = SK_MS_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_SPEED_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PLinkSpeed; + continue; + } + + /* + * If we find an active port with a different flow + * control mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pPrt->PLinkSpeed) { + + *pBuf = SK_LSPEED_INDETERMINATED; + } + break; + + case OID_SKGE_SPEED_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PLinkSpeedUsed; + continue; + } + + /* + * If we find an active port with a different flow + * control status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pPrt->PLinkSpeedUsed) { + + *pBuf = SK_LSPEED_STAT_INDETERMINATED; + } + break; + } + } + + /* + * If no port is active return an indeterminated answer + */ + if (!PortActiveFlag) { + + switch (Id) { + + case OID_SKGE_LINK_CAP: + *pBuf = SK_LMODE_CAP_INDETERMINATED; + break; + + case OID_SKGE_LINK_MODE: + *pBuf = SK_LMODE_INDETERMINATED; + break; + + case OID_SKGE_LINK_MODE_STATUS: + *pBuf = SK_LMODE_STAT_INDETERMINATED; + break; + + case OID_SKGE_LINK_STATUS: + *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; + break; + + case OID_SKGE_FLOWCTRL_CAP: + case OID_SKGE_FLOWCTRL_MODE: + *pBuf = SK_FLOW_MODE_INDETERMINATED; + break; + + case OID_SKGE_FLOWCTRL_STATUS: + *pBuf = SK_FLOW_STAT_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_CAP: + *pBuf = SK_MS_CAP_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_MODE: + *pBuf = SK_MS_MODE_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + *pBuf = SK_MS_STAT_INDETERMINATED; + break; + case OID_SKGE_SPEED_CAP: + *pBuf = SK_LSPEED_CAP_INDETERMINATED; + break; + + case OID_SKGE_SPEED_MODE: + *pBuf = SK_LSPEED_INDETERMINATED; + break; + + case OID_SKGE_SPEED_STATUS: + *pBuf = SK_LSPEED_STAT_INDETERMINATED; + break; + } + } +} + +/***************************************************************************** + * + * CalculateLinkStatus - Determins the link status of a physical port + * + * Description: + * Determins the link status the following way: + * LSTAT_PHY_DOWN: Link is down + * LSTAT_AUTONEG: Auto-negotiation failed + * LSTAT_LOG_DOWN: Link is up but RLMT did not yet put the port + * logically up. + * LSTAT_LOG_UP: RLMT marked the port as up + * + * Returns: + * Link status of physical port + */ +PNMI_STATIC SK_U8 CalculateLinkStatus( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex) /* Physical port index */ +{ + SK_U8 Result; + + if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) { + + Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN; + } + else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) { + + Result = SK_PNMI_RLMT_LSTAT_AUTONEG; + } + else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) { + + Result = SK_PNMI_RLMT_LSTAT_LOG_UP; + } + else { + Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN; + } + + return (Result); +} + +/***************************************************************************** + * + * CalculateLinkModeStatus - Determins the link mode status of a phys. port + * + * Description: + * The COMMON module only tells us if the mode is half or full duplex. + * But in the decade of auto sensing it is useful for the user to + * know if the mode was negotiated or forced. Therefore we have a + * look to the mode, which was last used by the negotiation process. + * + * Returns: + * The link mode status + */ +PNMI_STATIC SK_U8 CalculateLinkModeStatus( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex) /* Physical port index */ +{ + SK_U8 Result; + + /* Get the current mode, which can be full or half duplex */ + Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus; + + /* Check if no valid mode could be found (link is down) */ + if (Result < SK_LMODE_STAT_HALF) { + + Result = SK_LMODE_STAT_UNKNOWN; + } + else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) { + + /* + * Auto-negotiation was used to bring up the link. Change + * the already found duplex status that it indicates + * auto-negotiation was involved. + */ + if (Result == SK_LMODE_STAT_HALF) { + + Result = SK_LMODE_STAT_AUTOHALF; + } + else if (Result == SK_LMODE_STAT_FULL) { + + Result = SK_LMODE_STAT_AUTOFULL; + } + } + + return (Result); +} + +/***************************************************************************** + * + * GetVpdKeyArr - Obtain an array of VPD keys + * + * Description: + * Read the VPD keys and build an array of VPD keys, which are + * easy to access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int GetVpdKeyArr( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +char *pKeyArr, /* Ptr KeyArray */ +unsigned int KeyArrLen, /* Length of array in bytes */ +unsigned int *pKeyNo) /* Number of keys */ +{ + unsigned int BufKeysLen = SK_PNMI_VPD_BUFSIZE; + char BufKeys[SK_PNMI_VPD_BUFSIZE]; + unsigned int StartOffset; + unsigned int Offset; + int Index; + int Ret; + + + SK_MEMSET(pKeyArr, 0, KeyArrLen); + + /* + * Get VPD key list + */ + Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen, + (int *)pKeyNo); + if (Ret > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014, + SK_PNMI_ERR014MSG); + + return (SK_PNMI_ERR_GENERAL); + } + /* If no keys are available return now */ + if (*pKeyNo == 0 || BufKeysLen == 0) { + + return (SK_PNMI_ERR_OK); + } + /* + * If the key list is too long for us trunc it and give a + * errorlog notification. This case should not happen because + * the maximum number of keys is limited due to RAM limitations + */ + if (*pKeyNo > SK_PNMI_VPD_ENTRIES) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015, + SK_PNMI_ERR015MSG); + + *pKeyNo = SK_PNMI_VPD_ENTRIES; + } + + /* + * Now build an array of fixed string length size and copy + * the keys together. + */ + for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen; + Offset ++) { + + if (BufKeys[Offset] != 0) { + + continue; + } + + if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016, + SK_PNMI_ERR016MSG); + return (SK_PNMI_ERR_GENERAL); + } + + SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, + &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); + + Index ++; + StartOffset = Offset + 1; + } + + /* Last key not zero terminated? Get it anyway */ + if (StartOffset < Offset) { + + SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, + &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SirqUpdate - Let the SIRQ update its internal values + * + * Description: + * Just to be sure that the SIRQ module holds its internal data + * structures up to date, we send an update event before we make + * any access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int SirqUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC) /* IO context handle */ +{ + SK_EVPARA EventParam; + + + /* Was the module already updated during the current PNMI call? */ + if (pAC->Pnmi.SirqUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an synchronuous update event to the module */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047, + SK_PNMI_ERR047MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * RlmtUpdate - Let the RLMT update its internal values + * + * Description: + * Just to be sure that the RLMT module holds its internal data + * structures up to date, we send an update event before we make + * any access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int RlmtUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_EVPARA EventParam; + + + /* Was the module already updated during the current PNMI call? */ + if (pAC->Pnmi.RlmtUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an synchronuous update event to the module */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048, + SK_PNMI_ERR048MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacUpdate - Force the XMAC to output the current statistic + * + * Description: + * The XMAC holds its statistic internally. To obtain the current + * values we must send a command so that the statistic data will + * be written to a predefined memory area on the adapter. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int MacUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int FirstMac, /* Index of the first Mac to be updated */ +unsigned int LastMac) /* Index of the last Mac to be updated */ +{ + unsigned int MacIndex; + + /* + * Were the statistics already updated during the + * current PNMI call? + */ + if (pAC->Pnmi.MacUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an update command to all MACs specified */ + for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) { + + /* + * 2002-09-13 pweber: Freeze the current SW counters. + * (That should be done as close as + * possible to the update of the + * HW counters) + */ + if (pAC->GIni.GIMacType == SK_MAC_XMAC) { + pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex]; + } + + /* 2002-09-13 pweber: Update the HW counter */ + if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) { + + return (SK_PNMI_ERR_GENERAL); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * GetStatVal - Retrieve an XMAC statistic counter + * + * Description: + * Retrieves the statistic counter of a virtual or physical port. The + * virtual port is identified by the index 0. It consists of all + * currently active ports. To obtain the counter value for this port + * we must add the statistic counter of all active ports. To grant + * continuous counter values for the virtual port even when port + * switches occur we must additionally add a delta value, which was + * calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event. + * + * Returns: + * Requested statistic value + */ +PNMI_STATIC SK_U64 GetStatVal( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int LogPortIndex, /* Index of the logical Port to be processed */ +unsigned int StatIndex, /* Index to statistic value */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int PhysPortIndex; + unsigned int PhysPortMax; + SK_U64 Val = 0; + + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + + PhysPortIndex = NetIndex; + + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + else { /* Single Net mode */ + + if (LogPortIndex == 0) { + + PhysPortMax = pAC->GIni.GIMacsFound; + + /* Add counter of all active ports */ + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + Val += GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + } + + /* Correct value because of port switches */ + Val += pAC->Pnmi.VirtualCounterOffset[StatIndex]; + } + else { + /* Get counter value of physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); + + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + } + return (Val); +} + +/***************************************************************************** + * + * GetPhysStatVal - Get counter value for physical port + * + * Description: + * Builds a 64bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * in software by monitoring counter overflow interrupts in the + * event handler. To grant continous counter values during XMAC + * resets (caused by a workaround) we must add a delta value. + * The delta was calculated in the event handler when a + * SK_PNMI_EVT_XMAC_RESET was received. + * + * Returns: + * Counter value + */ +PNMI_STATIC SK_U64 GetPhysStatVal( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex, /* Index of the logical Port to be processed */ +unsigned int StatIndex) /* Index to statistic value */ +{ + SK_U64 Val = 0; + SK_U32 LowVal = 0; + SK_U32 HighVal = 0; + SK_U16 Word; + int MacType; + unsigned int HelpIndex; + SK_GEPORT *pPrt; + + SK_PNMI_PORT *pPnmiPrt; + SK_GEMACFUNC *pFnMac; + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + MacType = pAC->GIni.GIMacType; + + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex]; + } + else { + pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex]; + } + + pFnMac = &pAC->GIni.GIFunc; + + switch (StatIndex) { + case SK_PNMI_HTX: + if (MacType == SK_MAC_GMAC) { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_BROADCAST][MacType].Reg, + &LowVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_MULTICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_UNICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX: + if (MacType == SK_MAC_GMAC) { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HRX_BROADCAST][MacType].Reg, + &LowVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HRX_MULTICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HRX_UNICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_OCTET: + case SK_PNMI_HRX_OCTET: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &HighVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex + 1][MacType].Reg, + &LowVal); + break; + + case SK_PNMI_HTX_BURST: + case SK_PNMI_HTX_EXCESS_DEF: + case SK_PNMI_HTX_CARRIER: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_MACC: + /* GMAC only supports PAUSE MAC control frames */ + if (MacType == SK_MAC_GMAC) { + HelpIndex = SK_PNMI_HTX_PMACC; + } + else { + HelpIndex = StatIndex; + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[HelpIndex][MacType].Reg, + &LowVal); + + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_COL: + case SK_PNMI_HRX_UNDERSIZE: + /* Not supported by XMAC */ + if (MacType == SK_MAC_XMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_DEFFERAL: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + /* + * XMAC counts frames with deferred transmission + * even in full-duplex mode. + * + * In full-duplex mode the counter remains constant! + */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) || + (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL)) { + + LowVal = 0; + HighVal = 0; + } + else { + /* Otherwise get contents of hardware register */ + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + break; + + case SK_PNMI_HRX_BADOCTET: + /* Not supported by XMAC */ + if (MacType == SK_MAC_XMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &HighVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex + 1][MacType].Reg, + &LowVal); + break; + + case SK_PNMI_HTX_OCTETLOW: + case SK_PNMI_HRX_OCTETLOW: + case SK_PNMI_HRX_BADOCTETLOW: + return (Val); + + case SK_PNMI_HRX_LONGFRAMES: + /* For XMAC the SW counter is managed by PNMI */ + if (MacType == SK_MAC_XMAC) { + return (pPnmiPrt->StatRxLongFrameCts); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX_TOO_LONG: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + + if (MacType == SK_MAC_GMAC) { + /* For GMAC the SW counter is additionally managed by PNMI */ + Val += pPnmiPrt->StatRxFrameTooLongCts; + } + else { + /* + * Frames longer than IEEE 802.3 frame max size are counted + * by XMAC in frame_too_long counter even reception of long + * frames was enabled and the frame was correct. + * So correct the value by subtracting RxLongFrame counter. + */ + Val -= pPnmiPrt->StatRxLongFrameCts; + } + + LowVal = (SK_U32)Val; + HighVal = (SK_U32)(Val >> 32); + break; + + case SK_PNMI_HRX_SHORTS: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + /* GM_RXE_FRAG?? */ + return (Val); + } + + /* + * XMAC counts short frame errors even if link down (#10620) + * + * If link-down the counter remains constant + */ + if (pPrt->PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) { + + /* Otherwise get incremental difference */ + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + Val -= pPnmiPrt->RxShortZeroMark; + + LowVal = (SK_U32)Val; + HighVal = (SK_U32)(Val >> 32); + } + break; + + case SK_PNMI_HRX_MACC: + case SK_PNMI_HRX_MACC_UNKWN: + case SK_PNMI_HRX_BURST: + case SK_PNMI_HRX_MISSED: + case SK_PNMI_HRX_FRAMING: + case SK_PNMI_HRX_CARRIER: + case SK_PNMI_HRX_IRLENGTH: + case SK_PNMI_HRX_SYMBOL: + case SK_PNMI_HRX_CEXT: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX_PMACC_ERR: + /* For GMAC the SW counter is managed by PNMI */ + if (MacType == SK_MAC_GMAC) { + return (pPnmiPrt->StatRxPMaccErr); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + /* SW counter managed by PNMI */ + case SK_PNMI_HTX_SYNC: + LowVal = (SK_U32)pPnmiPrt->StatSyncCts; + HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32); + break; + + /* SW counter managed by PNMI */ + case SK_PNMI_HTX_SYNC_OCTET: + LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts; + HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32); + break; + + case SK_PNMI_HRX_FCS: + /* + * Broadcom filters FCS errors and counts it in + * Receive Error Counter register + */ + if (pPrt->PhyType == SK_PHY_BCOM) { + /* do not read while not initialized (PHY_READ hangs!)*/ + if (pPrt->PState != SK_PRT_RESET) { + SkXmPhyRead(pAC, IoC, PhysPortIndex, PHY_BCOM_RE_CTR, &Word); + + LowVal = Word; + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + break; + + default: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + } + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + + /* Correct value because of possible XMAC reset. XMAC Errata #2 */ + Val += pPnmiPrt->CounterOffset[StatIndex]; + + return (Val); +} + +/***************************************************************************** + * + * ResetCounter - Set all counters and timestamps to zero + * + * Description: + * Notifies other common modules which store statistic data to + * reset their counters and finally reset our own counters. + * + * Returns: + * Nothing + */ +PNMI_STATIC void ResetCounter( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 NetIndex) +{ + unsigned int PhysPortIndex; + SK_EVPARA EventParam; + + + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + + /* Notify sensor module */ + SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam); + + /* Notify RLMT module */ + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam); + EventParam.Para32[1] = 0; + + /* Notify SIRQ module */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam); + + /* Notify CSUM module */ +#ifdef SK_USE_CSUM + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS, + EventParam); +#endif /* SK_USE_CSUM */ + + /* Clear XMAC statistic */ + for (PhysPortIndex = 0; PhysPortIndex < + (unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) { + + (void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex); + + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh, + 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + CounterOffset, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].CounterOffset)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts, + 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatSyncOctetsCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxLongFrameCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxFrameTooLongCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxPMaccErr)); + } + + /* + * Clear local statistics + */ + SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0, + sizeof(pAC->Pnmi.VirtualCounterOffset)); + pAC->Pnmi.RlmtChangeCts = 0; + pAC->Pnmi.RlmtChangeTime = 0; + SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0, + sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue)); + pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0; + pAC->Pnmi.RlmtChangeEstimate.Estimate = 0; + pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0; + pAC->Pnmi.Port[NetIndex].TxRetryCts = 0; + pAC->Pnmi.Port[NetIndex].RxIntrCts = 0; + pAC->Pnmi.Port[NetIndex].TxIntrCts = 0; + pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0; + pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0; + pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0; + pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0; + pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0; + pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0; +} + +/***************************************************************************** + * + * GetTrapEntry - Get an entry in the trap buffer + * + * Description: + * The trap buffer stores various events. A user application somehow + * gets notified that an event occured and retrieves the trap buffer + * contens (or simply polls the buffer). The buffer is organized as + * a ring which stores the newest traps at the beginning. The oldest + * traps are overwritten by the newest ones. Each trap entry has a + * unique number, so that applications may detect new trap entries. + * + * Returns: + * A pointer to the trap entry + */ +PNMI_STATIC char* GetTrapEntry( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* SNMP ID of the trap */ +unsigned int Size) /* Space needed for trap entry */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int BufFree = pAC->Pnmi.TrapBufFree; + unsigned int Beg = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + int Wrap; + unsigned int NeededSpace; + unsigned int EntrySize; + SK_U32 Val32; + SK_U64 Val64; + + + /* Last byte of entry will get a copy of the entry length */ + Size ++; + + /* + * Calculate needed buffer space */ + if (Beg >= Size) { + + NeededSpace = Size; + Wrap = SK_FALSE; + } + else { + NeededSpace = Beg + Size; + Wrap = SK_TRUE; + } + + /* + * Check if enough buffer space is provided. Otherwise + * free some entries. Leave one byte space between begin + * and end of buffer to make it possible to detect whether + * the buffer is full or empty + */ + while (BufFree < NeededSpace + 1) { + + if (End == 0) { + + End = SK_PNMI_TRAP_QUEUE_LEN; + } + + EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1); + BufFree += EntrySize; + End -= EntrySize; +#ifdef DEBUG + SK_MEMSET(pBuf + End, (char)(-1), EntrySize); +#endif /* DEBUG */ + if (End == BufPad) { +#ifdef DEBUG + SK_MEMSET(pBuf, (char)(-1), End); +#endif /* DEBUG */ + BufFree += End; + End = 0; + BufPad = 0; + } + } + + /* + * Insert new entry as first entry. Newest entries are + * stored at the beginning of the queue. + */ + if (Wrap) { + + BufPad = Beg; + Beg = SK_PNMI_TRAP_QUEUE_LEN - Size; + } + else { + Beg = Beg - Size; + } + BufFree -= NeededSpace; + + /* Save the current offsets */ + pAC->Pnmi.TrapQueueBeg = Beg; + pAC->Pnmi.TrapQueueEnd = End; + pAC->Pnmi.TrapBufPad = BufPad; + pAC->Pnmi.TrapBufFree = BufFree; + + /* Initialize the trap entry */ + *(pBuf + Beg + Size - 1) = (char)Size; + *(pBuf + Beg) = (char)Size; + Val32 = (pAC->Pnmi.TrapUnique) ++; + SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32); + SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId); + Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64); + + return (pBuf + Beg); +} + +/***************************************************************************** + * + * CopyTrapQueue - Copies the trap buffer for the TRAP OID + * + * Description: + * On a query of the TRAP OID the trap buffer contents will be + * copied continuously to the request buffer, which must be large + * enough. No length check is performed. + * + * Returns: + * Nothing + */ +PNMI_STATIC void CopyTrapQueue( +SK_AC *pAC, /* Pointer to adapter context */ +char *pDstBuf) /* Buffer to which the queued traps will be copied */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int Trap = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + unsigned int Len; + unsigned int DstOff = 0; + + + while (Trap != End) { + + Len = (unsigned int)*(pBuf + Trap); + + /* + * Last byte containing a copy of the length will + * not be copied. + */ + *(pDstBuf + DstOff) = (char)(Len - 1); + SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2); + DstOff += Len - 1; + + Trap += Len; + if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { + + Trap = BufPad; + } + } +} + +/***************************************************************************** + * + * GetTrapQueueLen - Get the length of the trap buffer + * + * Description: + * Evaluates the number of currently stored traps and the needed + * buffer size to retrieve them. + * + * Returns: + * Nothing + */ +PNMI_STATIC void GetTrapQueueLen( +SK_AC *pAC, /* Pointer to adapter context */ +unsigned int *pLen, /* Length in Bytes of all queued traps */ +unsigned int *pEntries) /* Returns number of trapes stored in queue */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int Trap = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + unsigned int Len; + unsigned int Entries = 0; + unsigned int TotalLen = 0; + + + while (Trap != End) { + + Len = (unsigned int)*(pBuf + Trap); + TotalLen += Len - 1; + Entries ++; + + Trap += Len; + if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { + + Trap = BufPad; + } + } + + *pEntries = Entries; + *pLen = TotalLen; +} + +/***************************************************************************** + * + * QueueSimpleTrap - Store a simple trap to the trap buffer + * + * Description: + * A simple trap is a trap with now additional data. It consists + * simply of a trap code. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueSimpleTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId) /* Type of sensor trap */ +{ + GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN); +} + +/***************************************************************************** + * + * QueueSensorTrap - Stores a sensor trap in the trap buffer + * + * Description: + * Gets an entry in the trap buffer and fills it with sensor related + * data. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueSensorTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* Type of sensor trap */ +unsigned int SensorIndex) /* Index of sensor which caused the trap */ +{ + char *pBuf; + unsigned int Offset; + unsigned int DescrLen; + SK_U32 Val32; + + + /* Get trap buffer entry */ + DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc); + pBuf = GetTrapEntry(pAC, TrapId, + SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen); + Offset = SK_PNMI_TRAP_SIMPLE_LEN; + + /* Store additionally sensor trap related data */ + Val32 = OID_SKGE_SENSOR_INDEX; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 4; + Val32 = (SK_U32)SensorIndex; + SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); + Offset += 9; + + Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = (char)DescrLen; + SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc, + DescrLen); + Offset += DescrLen + 5; + + Val32 = OID_SKGE_SENSOR_TYPE; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 1; + *(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType; + Offset += 6; + + Val32 = OID_SKGE_SENSOR_VALUE; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 4; + Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue; + SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); +} + +/***************************************************************************** + * + * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueRlmtNewMacTrap( +SK_AC *pAC, /* Pointer to adapter context */ +unsigned int ActiveMac) /* Index (0..n) of the currently active port */ +{ + char *pBuf; + SK_U32 Val32; + + + pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT, + SK_PNMI_TRAP_RLMT_CHANGE_LEN); + + Val32 = OID_SKGE_RLMT_PORT_ACTIVE; + SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac; +} + +/***************************************************************************** + * + * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueRlmtPortTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* Type of RLMT port trap */ +unsigned int PortIndex) /* Index of the port, which changed its state */ +{ + char *pBuf; + SK_U32 Val32; + + + pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN); + + Val32 = OID_SKGE_RLMT_PORT_INDEX; + SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex; +} + +/***************************************************************************** + * + * CopyMac - Copies a MAC address + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void CopyMac( +char *pDst, /* Pointer to destination buffer */ +SK_MAC_ADDR *pMac) /* Pointer of Source */ +{ + int i; + + + for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) { + + *(pDst + i) = pMac->a[i]; + } +} + +#ifdef SK_POWER_MGMT +/***************************************************************************** + * + * PowerManagement - OID handler function of PowerManagement OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ + +PNMI_STATIC int PowerManagement( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + + /* Check length */ + switch (Id) { + + case OID_PNP_CAPABILITIES: + if (*pLen < sizeof(SK_PNP_CAPABILITIES)) { + + *pLen = sizeof(SK_PNP_CAPABILITIES); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_SET_POWER: + case OID_PNP_QUERY_POWER: + if (*pLen < sizeof(SK_DEVICE_POWER_STATE)) + { + *pLen = sizeof(SK_DEVICE_POWER_STATE); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) { + + *pLen = sizeof(SK_PM_PACKET_PATTERN); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_ENABLE_WAKE_UP: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + } + + /* + * Perform action + */ + if (Action == SK_PNMI_GET) { + + /* + * Get value + */ + switch (Id) { + + case OID_PNP_CAPABILITIES: + RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_QUERY_POWER: + /* The Windows DDK describes: An OID_PNP_QUERY_POWER requests + the miniport to indicate whether it can transition its NIC + to the low-power state. + A miniport driver must always return NDIS_STATUS_SUCCESS + to a query of OID_PNP_QUERY_POWER. */ + *pLen = sizeof(SK_DEVICE_POWER_STATE); + RetCode = SK_PNMI_ERR_OK; + break; + + /* NDIS handles these OIDs as write-only. + * So in case of get action the buffer with written length = 0 + * is returned + */ + case OID_PNP_SET_POWER: + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + *pLen = 0; + RetCode = SK_PNMI_ERR_NOT_SUPPORTED; + break; + + case OID_PNP_ENABLE_WAKE_UP: + RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen); + break; + + default: + RetCode = SK_PNMI_ERR_GENERAL; + break; + } + + return (RetCode); + } + + + /* + * Perform preset or set + */ + + /* POWER module does not support PRESET action */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + switch (Id) { + case OID_PNP_SET_POWER: + RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_ADD_WAKE_UP_PATTERN: + RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_ENABLE_WAKE_UP: + RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen); + break; + + default: + RetCode = SK_PNMI_ERR_READ_ONLY; + } + + return (RetCode); +} +#endif /* SK_POWER_MGMT */ + +#ifdef SK_DIAG_SUPPORT +/***************************************************************************** + * + * DiagActions - OID handler function of Diagnostic driver + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ + +PNMI_STATIC int DiagActions( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + + SK_U32 DiagStatus; + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + + /* + * Check instance. We only handle single instance variables. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check length. + */ + switch (Id) { + + case OID_SKGE_DIAG_MODE: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, SK_PNMI_ERR040MSG); + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Perform action. */ + + /* GET value. */ + if (Action == SK_PNMI_GET) { + + switch (Id) { + + case OID_SKGE_DIAG_MODE: + DiagStatus = pAC->Pnmi.DiagAttached; + SK_PNMI_STORE_U32(pBuf, DiagStatus); + *pLen = sizeof(SK_U32); + RetCode = SK_PNMI_ERR_OK; + break; + + default: + *pLen = 0; + RetCode = SK_PNMI_ERR_GENERAL; + break; + } + return (RetCode); + } + + /* From here SET or PRESET value. */ + + /* PRESET value is not supported. */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + /* SET value. */ + switch (Id) { + case OID_SKGE_DIAG_MODE: + + /* Handle the SET. */ + switch (*pBuf) { + + /* Attach the DIAG to this adapter. */ + case SK_DIAG_ATTACHED: + /* Check if we come from running */ + if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { + + RetCode = SkDrvLeaveDiagMode(pAC); + + } + else if (pAC->Pnmi.DiagAttached == SK_DIAG_IDLE) { + + RetCode = SK_PNMI_ERR_OK; + } + + else { + + RetCode = SK_PNMI_ERR_GENERAL; + + } + + if (RetCode == SK_PNMI_ERR_OK) { + + pAC->Pnmi.DiagAttached = SK_DIAG_ATTACHED; + } + break; + + /* Enter the DIAG mode in the driver. */ + case SK_DIAG_RUNNING: + RetCode = SK_PNMI_ERR_OK; + + /* + * If DiagAttached is set, we can tell the driver + * to enter the DIAG mode. + */ + if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) { + /* If DiagMode is not active, we can enter it. */ + if (!pAC->DiagModeActive) { + + RetCode = SkDrvEnterDiagMode(pAC); + } + else { + + RetCode = SK_PNMI_ERR_GENERAL; + } + } + else { + + RetCode = SK_PNMI_ERR_GENERAL; + } + + if (RetCode == SK_PNMI_ERR_OK) { + + pAC->Pnmi.DiagAttached = SK_DIAG_RUNNING; + } + break; + + case SK_DIAG_IDLE: + /* Check if we come from running */ + if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { + + RetCode = SkDrvLeaveDiagMode(pAC); + + } + else if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) { + + RetCode = SK_PNMI_ERR_OK; + } + + else { + + RetCode = SK_PNMI_ERR_GENERAL; + + } + + if (RetCode == SK_PNMI_ERR_OK) { + + pAC->Pnmi.DiagAttached = SK_DIAG_IDLE; + } + break; + + default: + RetCode = SK_PNMI_ERR_BAD_VALUE; + break; + } + break; + + default: + RetCode = SK_PNMI_ERR_GENERAL; + } + + if (RetCode == SK_PNMI_ERR_OK) { + *pLen = sizeof(SK_U32); + } + else { + + *pLen = 0; + } + return (RetCode); +} +#endif /* SK_DIAG_SUPPORT */ + +/***************************************************************************** + * + * Vct - OID handler function of OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was performed successfully. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter). + * SK_PNMI_ERR_READ_ONLY Only the Get action is allowed. + * + */ + +PNMI_STATIC int Vct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (-1,2..n) that is to be queried */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + SK_U32 LogPortMax; + SK_U32 PhysPortMax; + SK_U32 PhysPortIndex; + SK_U32 Limit; + SK_U32 Offset; + SK_BOOL Link; + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + int i; + SK_EVPARA Para; + SK_U32 CableLength; + + /* + * Calculate the port indexes from the instance. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + /* Dual net mode? */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + LogPortMax--; + } + + if ((Instance != (SK_U32) (-1))) { + /* Check instance range. */ + if ((Instance < 2) || (Instance > LogPortMax)) { + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + } + else { + PhysPortIndex = Instance - 2; + } + Limit = PhysPortIndex + 1; + } + else { + /* + * Instance == (SK_U32) (-1), get all Instances of that OID. + * + * Not implemented yet. May be used in future releases. + */ + PhysPortIndex = 0; + Limit = PhysPortMax; + } + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + if (pPrt->PHWLinkUp) { + Link = SK_TRUE; + } + else { + Link = SK_FALSE; + } + + /* Check MAC type */ + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Initialize backup data pointer. */ + pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; + + /* Check action type */ + if (Action == SK_PNMI_GET) { + /* Check length */ + switch (Id) { + + case OID_SKGE_VCT_GET: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_VCT_STATUS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Get value */ + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex++) { + switch (Id) { + + case OID_SKGE_VCT_GET: + if ((Link == SK_FALSE) && + (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) { + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 0) { + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] |= + (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); + + /* Copy results for later use to PNMI struct. */ + for (i = 0; i < 4; i++) { + if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { + if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) { + pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; + } + } + if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) { + CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); + } + else { + CableLength = 0; + } + pVctBackupData->PMdiPairLen[i] = CableLength; + pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; + } + + Para.Para32[0] = PhysPortIndex; + Para.Para32[1] = -1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + SkEventDispatcher(pAC, IoC); + } + else { + ; /* VCT test is running. */ + } + } + + /* Get all results. */ + CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); + Offset += sizeof(SK_U8); + *(pBuf + Offset) = pPrt->PCableLen; + Offset += sizeof(SK_U8); + for (i = 0; i < 4; i++) { + SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]); + Offset += sizeof(SK_U32); + } + for (i = 0; i < 4; i++) { + *(pBuf + Offset) = pVctBackupData->PMdiPairSts[i]; + Offset += sizeof(SK_U8); + } + + RetCode = SK_PNMI_ERR_OK; + break; + + case OID_SKGE_VCT_STATUS: + CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); + Offset += sizeof(SK_U8); + RetCode = SK_PNMI_ERR_OK; + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } /* for */ + *pLen = Offset; + return (RetCode); + + } /* if SK_PNMI_GET */ + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + + /* Check length */ + switch (Id) { + case OID_SKGE_VCT_SET: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform preset or set. + */ + + /* VCT does not support PRESET action. */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex++) { + switch (Id) { + case OID_SKGE_VCT_SET: /* Start VCT test. */ + if (Link == SK_FALSE) { + SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST); + + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE); + if (RetCode == 0) { /* RetCode: 0 => Start! */ + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA; + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK; + + /* + * Start VCT timer counter. + */ + SK_MEMSET((char *) &Para, 0, sizeof(Para)); + Para.Para32[0] = PhysPortIndex; + Para.Para32[1] = -1; + SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, + 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para); + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + else { /* RetCode: 2 => Running! */ + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + } + else { /* RetCode: 4 => Link! */ + RetCode = 4; + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + Offset += sizeof(SK_U32); + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } /* for */ + *pLen = Offset; + return (RetCode); + +} /* Vct */ + + +PNMI_STATIC void CheckVctStatus( +SK_AC *pAC, +SK_IOC IoC, +char *pBuf, +SK_U32 Offset, +SK_U32 PhysPortIndex) +{ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctData; + SK_U32 RetCode; + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + pVctData = (SK_PNMI_VCT *) (pBuf + Offset); + pVctData->VctStatus = SK_PNMI_VCT_NONE; + + if (!pPrt->PHWLinkUp) { + + /* Was a VCT test ever made before? */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { + if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) { + pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; + } + else { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; + } + } + + /* Check VCT test status. */ + RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 2) { /* VCT test is running. */ + pVctData->VctStatus |= SK_PNMI_VCT_RUNNING; + } + else { /* VCT data was copied to pAC here. Check PENDING state. */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; + } + } + + if (pPrt->PCableLen != 0xff) { /* Old DSP value. */ + pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA; + } + } + else { + + /* Was a VCT test ever made before? */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { + pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA; + pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; + } + + /* DSP only valid in 100/1000 modes. */ + if (pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed != + SK_LSPEED_STAT_10MBPS) { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA; + } + } +} /* CheckVctStatus */ + + +/***************************************************************************** + * + * SkPnmiGenIoctl - Handles new generic PNMI IOCTL, calls the needed + * PNMI function depending on the subcommand and + * returns all data belonging to the complete database + * or OID request. + * + * Description: + * Looks up the requested subcommand, calls the corresponding handler + * function and passes all required parameters to it. + * The function is called by the driver. It is needed to handle the new + * generic PNMI IOCTL. This IOCTL is given to the driver and contains both + * the OID and a subcommand to decide what kind of request has to be done. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiGenIoctl( +SK_AC *pAC, /* Pointer to adapter context struct */ +SK_IOC IoC, /* I/O context */ +void *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ +SK_I32 Mode; /* Store value of subcommand. */ +SK_U32 Oid; /* Store value of OID. */ +int ReturnCode; /* Store return value to show status of PNMI action. */ +int HeaderLength; /* Length of desired action plus OID. */ + + ReturnCode = SK_PNMI_ERR_GENERAL; + + SK_MEMCPY(&Mode, pBuf, sizeof(SK_I32)); + SK_MEMCPY(&Oid, (char *) pBuf + sizeof(SK_I32), sizeof(SK_U32)); + HeaderLength = sizeof(SK_I32) + sizeof(SK_U32); + *pLen = *pLen - HeaderLength; + SK_MEMCPY((char *) pBuf + sizeof(SK_I32), (char *) pBuf + HeaderLength, *pLen); + + switch(Mode) { + case SK_GET_SINGLE_VAR: + ReturnCode = SkPnmiGetVar(pAC, IoC, Oid, + (char *) pBuf + sizeof(SK_I32), pLen, + ((SK_U32) (-1)), NetIndex); + SK_PNMI_STORE_U32(pBuf, ReturnCode); + *pLen = *pLen + sizeof(SK_I32); + break; + case SK_PRESET_SINGLE_VAR: + ReturnCode = SkPnmiPreSetVar(pAC, IoC, Oid, + (char *) pBuf + sizeof(SK_I32), pLen, + ((SK_U32) (-1)), NetIndex); + SK_PNMI_STORE_U32(pBuf, ReturnCode); + *pLen = *pLen + sizeof(SK_I32); + break; + case SK_SET_SINGLE_VAR: + ReturnCode = SkPnmiSetVar(pAC, IoC, Oid, + (char *) pBuf + sizeof(SK_I32), pLen, + ((SK_U32) (-1)), NetIndex); + SK_PNMI_STORE_U32(pBuf, ReturnCode); + *pLen = *pLen + sizeof(SK_I32); + break; + case SK_GET_FULL_MIB: + ReturnCode = SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex); + break; + case SK_PRESET_FULL_MIB: + ReturnCode = SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex); + break; + case SK_SET_FULL_MIB: + ReturnCode = SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex); + break; + default: + break; + } + + return (ReturnCode); + +} /* SkGeIocGen */ diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c new file mode 100644 index 00000000000..3e7aa49afd0 --- /dev/null +++ b/drivers/net/sk98lin/skgesirq.c @@ -0,0 +1,2229 @@ +/****************************************************************************** + * + * Name: skgesirq.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.92 $ + * Date: $Date: 2003/09/16 14:37:07 $ + * Purpose: Special IRQ module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * Special Interrupt handler + * + * The following abstract should show how this module is included + * in the driver path: + * + * In the ISR of the driver the bits for frame transmission complete and + * for receive complete are checked and handled by the driver itself. + * The bits of the slow path mask are checked after that and then the + * entry into the so-called "slow path" is prepared. It is an implementors + * decision whether this is executed directly or just scheduled by + * disabling the mask. In the interrupt service routine some events may be + * generated, so it would be a good idea to call the EventDispatcher + * right after this ISR. + * + * The Interrupt source register of the adapter is NOT read by this module. + * SO if the drivers implementor needs a while loop around the + * slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for + * each loop entered. + * + * However, the MAC Interrupt status registers are read in a while loop. + * + */ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#ifndef SK_SLIM +#include "h/skgepnmi.h" /* PNMI Definitions */ +#include "h/skrlmt.h" /* RLMT Definitions */ +#endif +#include "h/skdrv2nd.h" /* Adapter Control and Driver specific Def. */ + +/* local function prototypes */ +#ifdef GENESIS +static int SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16); +#endif /* GENESIS */ +#ifdef YUKON +static int SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16); +#endif /* YUKON */ +#ifdef OTHER_PHY +static int SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16); +#endif /* OTHER_PHY */ + +#ifdef GENESIS +/* + * array of Rx counter from XMAC which are checked + * in AutoSense mode to check whether a link is not able to auto-negotiate. + */ +static const SK_U16 SkGeRxRegs[]= { + XM_RXF_64B, + XM_RXF_127B, + XM_RXF_255B, + XM_RXF_511B, + XM_RXF_1023B, + XM_RXF_MAX_SZ +} ; +#endif /* GENESIS */ + +#ifdef __C2MAN__ +/* + * Special IRQ function + * + * General Description: + * + */ +intro() +{} +#endif + +/****************************************************************************** + * + * SkHWInitDefSense() - Default Autosensing mode initialization + * + * Description: sets the PLinkMode for HWInit + * + * Returns: N/A + */ +static void SkHWInitDefSense( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) { + pPrt->PLinkMode = pPrt->PLinkModeConf; + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoSensing: First mode %d on Port %d\n", + (int)SK_LMODE_AUTOFULL, Port)); + + pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; + + return; +} /* SkHWInitDefSense */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkHWSenseGetNext() - Get Next Autosensing Mode + * + * Description: gets the appropriate next mode + * + * Note: + * + */ +static SK_U8 SkHWSenseGetNext( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { + /* Leave all as configured */ + return(pPrt->PLinkModeConf); + } + + if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) { + /* Return next mode AUTOBOTH */ + return ((SK_U8)SK_LMODE_AUTOBOTH); + } + + /* Return default autofull */ + return ((SK_U8)SK_LMODE_AUTOFULL); +} /* SkHWSenseGetNext */ + + +/****************************************************************************** + * + * SkHWSenseSetNext() - Autosensing Set next mode + * + * Description: sets the appropriate next mode + * + * Returns: N/A + */ +static void SkHWSenseSetNext( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U8 NewMode) /* New Mode to be written in sense mode */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoSensing: next mode %d on Port %d\n", + (int)NewMode, Port)); + + pPrt->PLinkMode = NewMode; + + return; +} /* SkHWSenseSetNext */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkHWLinkDown() - Link Down handling + * + * Description: handles the hardware link down signal + * + * Returns: N/A + */ +void SkHWLinkDown( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Disable all MAC interrupts */ + SkMacIrqDisable(pAC, IoC, Port); + + /* Disable Receiver and Transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + + /* Init default sense mode */ + SkHWInitDefSense(pAC, IoC, Port); + + if (pPrt->PHWLinkUp == SK_FALSE) { + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link down Port %d\n", Port)); + + /* Set Link to DOWN */ + pPrt->PHWLinkUp = SK_FALSE; + + /* Reset Port stati */ + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED; + + /* Re-init Phy especially when the AutoSense default is set now */ + SkMacInitPhy(pAC, IoC, Port, SK_FALSE); + + /* GP0: used for workaround of Rev. C Errata 2 */ + + /* Do NOT signal to RLMT */ + + /* Do NOT start the timer here */ +} /* SkHWLinkDown */ + + +/****************************************************************************** + * + * SkHWLinkUp() - Link Up handling + * + * Description: handles the hardware link up signal + * + * Returns: N/A + */ +static void SkHWLinkUp( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + /* We do NOT need to proceed on active link */ + return; + } + + pPrt->PHWLinkUp = SK_TRUE; + pPrt->PAutoNegFail = SK_FALSE; + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + + if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF && + pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL && + pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) { + /* Link is up and no Auto-negotiation should be done */ + + /* Link speed should be the configured one */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + /* default is 1000 Mbps */ + case SK_LSPEED_1000MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + break; + case SK_LSPEED_100MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; + break; + case SK_LSPEED_10MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; + break; + } + + /* Set Link Mode Status */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF; + } + + /* No flow control without auto-negotiation */ + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + + /* enable Rx/Tx */ + (void)SkMacRxTxEnable(pAC, IoC, Port); + } +} /* SkHWLinkUp */ + + +/****************************************************************************** + * + * SkMacParity() - MAC parity workaround + * + * Description: handles MAC parity errors correctly + * + * Returns: N/A + */ +static void SkMacParity( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index of the port failed */ +{ + SK_EVPARA Para; + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U32 TxMax; /* Tx Max Size Counter */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Clear IRQ Tx Parity Error */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), + (SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON && + pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE)); + } +#endif /* YUKON */ + + if (pPrt->PCheckPar) { + + if (Port == MAC_1) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG); + } + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = Port; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + return; + } + + /* Check whether frames with a size of 1k were sent */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, Port); + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax); + } +#endif /* YUKON */ + + if (TxMax > 0) { + /* From now on check the parity */ + pPrt->PCheckPar = SK_TRUE; + } +} /* SkMacParity */ + + +/****************************************************************************** + * + * SkGeHwErr() - Hardware Error service routine + * + * Description: handles all HW Error interrupts + * + * Returns: N/A + */ +static void SkGeHwErr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +SK_U32 HwStatus) /* Interrupt status word */ +{ + SK_EVPARA Para; + SK_U16 Word; + + if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) { + /* PCI Errors occured */ + if ((HwStatus & IS_IRQ_STAT) != 0) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG); + } + + /* Reset all bits in the PCI STATUS register */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + if ((HwStatus & IS_NO_STAT_M1) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT); + } + + if ((HwStatus & IS_NO_STAT_M2) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT); + } + + if ((HwStatus & IS_NO_TIST_M1) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST); + } + + if ((HwStatus & IS_NO_TIST_M2) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* This is necessary only for Rx timing measurements */ + if ((HwStatus & IS_IRQ_TIST_OV) != 0) { + /* increment Time Stamp Timer counter (high) */ + pAC->GIni.GITimeStampCnt++; + + /* Clear Time Stamp Timer IRQ */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ); + } + + if ((HwStatus & IS_IRQ_SENSOR) != 0) { + /* no sensors on 32-bit Yukon */ + if (pAC->GIni.GIYukon32Bit) { + /* disable HW Error IRQ */ + pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; + } + } + } +#endif /* YUKON */ + + if ((HwStatus & IS_RAM_RD_PAR) != 0) { + SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR); + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG); + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + + if ((HwStatus & IS_RAM_WR_PAR) != 0) { + SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR); + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG); + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + + if ((HwStatus & IS_M1_PAR_ERR) != 0) { + SkMacParity(pAC, IoC, MAC_1); + } + + if ((HwStatus & IS_M2_PAR_ERR) != 0) { + SkMacParity(pAC, IoC, MAC_2); + } + + if ((HwStatus & IS_R1_PAR_ERR) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P); + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((HwStatus & IS_R2_PAR_ERR) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P); + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } +} /* SkGeHwErr */ + + +/****************************************************************************** + * + * SkGeSirqIsr() - Special Interrupt Service Routine + * + * Description: handles all non data transfer specific interrupts (slow path) + * + * Returns: N/A + */ +void SkGeSirqIsr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +SK_U32 Istatus) /* Interrupt status word */ +{ + SK_EVPARA Para; + SK_U32 RegVal32; /* Read register value */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U16 PhyInt; + int i; + + if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); + + SkGeHwErr(pAC, IoC, RegVal32); + } + + /* + * Packet Timeout interrupts + */ + /* Check whether MACs are correctly initialized */ + if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) && + pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) { + /* MAC 1 was not initialized but Packet timeout occured */ + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004, + SKERR_SIRQ_E004MSG); + } + + if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) && + pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) { + /* MAC 2 was not initialized but Packet timeout occured */ + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005, + SKERR_SIRQ_E005MSG); + } + + if ((Istatus & IS_PA_TO_RX1) != 0) { + /* Means network is filling us up */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002, + SKERR_SIRQ_E002MSG); + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1); + } + + if ((Istatus & IS_PA_TO_RX2) != 0) { + /* Means network is filling us up */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003, + SKERR_SIRQ_E003MSG); + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2); + } + + if ((Istatus & IS_PA_TO_TX1) != 0) { + + pPrt = &pAC->GIni.GP[0]; + + /* May be a normal situation in a server with a slow network */ + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* + * workaround: if in half duplex mode, check for Tx hangup. + * Read number of TX'ed bytes, wait for 10 ms, then compare + * the number with current value. If nothing changed, we assume + * that Tx is hanging and do a FIFO flush (see event routine). + */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && + !pPrt->HalfDupTimerActive) { + /* + * many more pack. arb. timeouts may come in between, + * we ignore those + */ + pPrt->HalfDupTimerActive = SK_TRUE; + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, 0); + + (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32); + + pPrt->LastOctets = (SK_U64)RegVal32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32); + + pPrt->LastOctets += RegVal32; + + Para.Para32[0] = 0; + SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, + SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); + } + } +#endif /* GENESIS */ + } + + if ((Istatus & IS_PA_TO_TX2) != 0) { + + pPrt = &pAC->GIni.GP[1]; + + /* May be a normal situation in a server with a slow network */ + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* workaround: see above */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && + !pPrt->HalfDupTimerActive) { + pPrt->HalfDupTimerActive = SK_TRUE; + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, 1); + + (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32); + + pPrt->LastOctets = (SK_U64)RegVal32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32); + + pPrt->LastOctets += RegVal32; + + Para.Para32[0] = 1; + SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, + SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); + } + } +#endif /* GENESIS */ + } + + /* Check interrupts of the particular queues */ + if ((Istatus & IS_R1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006, + SKERR_SIRQ_E006MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_R2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007, + SKERR_SIRQ_E007MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XS1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008, + SKERR_SIRQ_E008MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XA1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009, + SKERR_SIRQ_E009MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XS2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010, + SKERR_SIRQ_E010MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XA2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011, + SKERR_SIRQ_E011MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + /* External reg interrupt */ + if ((Istatus & IS_EXT_REG) != 0) { + /* Test IRQs from PHY */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + pPrt = &pAC->GIni.GP[i]; + + if (pPrt->PState == SK_PRT_RESET) { + continue; + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + break; + + case SK_PHY_BCOM: + SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt); + + if ((PhyInt & ~PHY_B_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Bcom Int: 0x%04X\n", + i, PhyInt)); + SkPhyIsrBcom(pAC, IoC, i, PhyInt); + } + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt); + + if ((PhyInt & PHY_L_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Lone Int: %x\n", + i, PhyInt)); + SkPhyIsrLone(pAC, IoC, i, PhyInt); + } + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Read PHY Interrupt Status */ + SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt); + + if ((PhyInt & PHY_M_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Marv Int: 0x%04X\n", + i, PhyInt)); + SkPhyIsrGmac(pAC, IoC, i, PhyInt); + } + } +#endif /* YUKON */ + } + } + + /* I2C Ready interrupt */ + if ((Istatus & IS_I2C_READY) != 0) { +#ifdef SK_SLIM + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); +#else + SkI2cIsr(pAC, IoC); +#endif + } + + /* SW forced interrupt */ + if ((Istatus & IS_IRQ_SW) != 0) { + /* clear the software IRQ */ + SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ); + } + + if ((Istatus & IS_LNK_SYNC_M1) != 0) { + /* + * We do NOT need the Link Sync interrupt, because it shows + * us only a link going down. + */ + /* clear interrupt */ + SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ); + } + + /* Check MAC after link sync counter */ + if ((Istatus & IS_MAC1) != 0) { + /* IRQ from MAC 1 */ + SkMacIrq(pAC, IoC, MAC_1); + } + + if ((Istatus & IS_LNK_SYNC_M2) != 0) { + /* + * We do NOT need the Link Sync interrupt, because it shows + * us only a link going down. + */ + /* clear interrupt */ + SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ); + } + + /* Check MAC after link sync counter */ + if ((Istatus & IS_MAC2) != 0) { + /* IRQ from MAC 2 */ + SkMacIrq(pAC, IoC, MAC_2); + } + + /* Timer interrupt (served last) */ + if ((Istatus & IS_TIMINT) != 0) { + /* check for HW Errors */ + if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); + + SkGeHwErr(pAC, IoC, RegVal32); + } + + SkHwtIsr(pAC, IoC); + } + +} /* SkGeSirqIsr */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2 + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + */ +static int SkGePortCheckShorts( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port) /* Which port should be checked */ +{ + SK_U32 Shorts; /* Short Event Counter */ + SK_U32 CheckShorts; /* Check value for Short Event Counter */ + SK_U64 RxCts; /* Rx Counter (packets on network) */ + SK_U32 RxTmp; /* Rx temp. Counter */ + SK_U32 FcsErrCts; /* FCS Error Counter */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Rtv; /* Return value */ + int i; + + pPrt = &pAC->GIni.GP[Port]; + + /* Default: no action */ + Rtv = SK_HW_PS_NONE; + + (void)SkXmUpdateStats(pAC, IoC, Port); + + /* Extra precaution: check for short Event counter */ + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); + + /* + * Read Rx counters (packets seen on the network and not necessarily + * really received. + */ + RxCts = 0; + + for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) { + + (void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp); + + RxCts += (SK_U64)RxTmp; + } + + /* On default: check shorts against zero */ + CheckShorts = 0; + + /* Extra precaution on active links */ + if (pPrt->PHWLinkUp) { + /* Reset Link Restart counter */ + pPrt->PLinkResCt = 0; + pPrt->PAutoNegTOCt = 0; + + /* If link is up check for 2 */ + CheckShorts = 2; + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts); + + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN && + (pPrt->PLinkMode == SK_LMODE_HALF || + pPrt->PLinkMode == SK_LMODE_FULL)) { + /* + * This is autosensing and we are in the fallback + * manual full/half duplex mode. + */ + if (RxCts == pPrt->PPrevRx) { + /* Nothing received, restart link */ + pPrt->PPrevFcs = FcsErrCts; + pPrt->PPrevShorts = Shorts; + + return(SK_HW_PS_RESTART); + } + else { + pPrt->PLipaAutoNeg = SK_LIPA_MANUAL; + } + } + + if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) || + (!(FcsErrCts - pPrt->PPrevFcs))) { + /* + * Note: The compare with zero above has to be done the way shown, + * otherwise the Linux driver will have a problem. + */ + /* + * We received a bunch of frames or no CRC error occured on the + * network -> ok. + */ + pPrt->PPrevRx = RxCts; + pPrt->PPrevFcs = FcsErrCts; + pPrt->PPrevShorts = Shorts; + + return(SK_HW_PS_NONE); + } + + pPrt->PPrevFcs = FcsErrCts; + } + + + if ((Shorts - pPrt->PPrevShorts) > CheckShorts) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Short Event Count Restart Port %d \n", Port)); + Rtv = SK_HW_PS_RESTART; + } + + pPrt->PPrevShorts = Shorts; + pPrt->PPrevRx = RxCts; + + return(Rtv); +} /* SkGePortCheckShorts */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkGePortCheckUp() - Check if the link is up + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port) /* Which port should be checked */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */ + int Rtv; /* Return value */ + + Rtv = SK_HW_PS_NONE; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + AutoNeg = SK_FALSE; + } + else { + AutoNeg = SK_TRUE; + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg); + break; + case SK_PHY_BCOM: + Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg); + break; + case SK_PHY_NAT: + Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg); + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg); + } +#endif /* YUKON */ + + return(Rtv); +} /* SkGePortCheckUp */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2 + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpXmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_U32 Shorts; /* Short Event Counter */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U32 GpReg; /* General Purpose register value */ + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 IsrcSum; /* Interrupt source register sum */ + SK_U16 LpAb; /* Link Partner Ability */ + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 ExtStat; /* Extended Status Register */ + SK_U8 NextMode; /* Next AutoSensing Mode */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + if (pPrt->PhyType != SK_PHY_XMAC) { + return(SK_HW_PS_NONE); + } + else { + return(SkGePortCheckShorts(pAC, IoC, Port)); + } + } + + IsrcSum = pPrt->PIsave; + pPrt->PIsave = 0; + + /* Now wait for each port's link */ + if (pPrt->PLinkBroken) { + /* Link was broken */ + XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); + + if ((GpReg & XM_GP_INP_ASS) == 0) { + /* The Link is in sync */ + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); + + if ((Isrc & XM_IS_INP_ASS) == 0) { + /* It has been in sync since last time */ + /* Restart the PORT */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link in sync Restart Port %d\n", Port)); + + (void)SkXmUpdateStats(pAC, IoC, Port); + + /* We now need to reinitialize the PrevShorts counter */ + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); + pPrt->PPrevShorts = Shorts; + + pPrt->PLinkBroken = SK_FALSE; + + /* + * Link Restart Workaround: + * it may be possible that the other Link side + * restarts its link as well an we detect + * another LinkBroken. To prevent this + * happening we check for a maximum number + * of consecutive restart. If those happens, + * we do NOT restart the active link and + * check whether the link is now o.k. + */ + pPrt->PLinkResCt++; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkResCt < SK_MAX_LRESTART) { + return(SK_HW_PS_RESTART); + } + + pPrt->PLinkResCt = 0; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum)); + } + else { + pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum)); + + /* Do nothing more if link is broken */ + return(SK_HW_PS_NONE); + } + } + else { + /* Do nothing more if link is broken */ + return(SK_HW_PS_NONE); + } + + } + else { + /* Link was not broken, check if it is */ + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + pPrt->PLinkBroken = SK_TRUE; + /* Re-Init Link partner Autoneg flag */ + pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link broken Port %d\n", Port)); + + /* Cable removed-> reinit sense mode */ + SkHWInitDefSense(pAC, IoC, Port); + + return(SK_HW_PS_RESTART); + } + } + } + else { + SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc); + + if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) { + return(SK_HW_PS_RESTART); + } + } + } + + /* + * here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + + SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); + + if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) { + if ((GpReg & XM_GP_INP_ASS) == 0) { + /* Save Auto-negotiation Done interrupt only if link is in sync */ + pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); + } +#ifdef DEBUG + if ((pPrt->PIsave & XM_IS_AND) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done rescheduled Port %d\n", Port)); + } +#endif /* DEBUG */ + return(SK_HW_PS_NONE); + } + + if (AutoNeg) { + if ((IsrcSum & XM_IS_AND) != 0) { + SkHWLinkUp(pAC, IoC, Port); + Done = SkMacAutoNegDone(pAC, IoC, Port); + if (Done != SK_AND_OK) { + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n", + Port, LpAb, ResAb)); + + /* Try next possible mode */ + NextMode = SkHWSenseGetNext(pAC, IoC, Port); + SkHWLinkDown(pAC, IoC, Port); + if (Done == SK_AND_DUP_CAP) { + /* GoTo next mode */ + SkHWSenseSetNext(pAC, IoC, Port, NextMode); + } + + return(SK_HW_PS_RESTART); + } + /* + * Dummy Read extended status to prevent extra link down/ups + * (clear Page Received bit if set) + */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat); + + return(SK_HW_PS_LINK); + } + + /* AutoNeg not done, but HW link is up. Check for timeouts */ + pPrt->PAutoNegTimeOut++; + if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { + /* Increase the Timeout counter */ + pPrt->PAutoNegTOCt++; + + /* Timeout occured */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoNeg timeout Port %d\n", Port)); + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { + /* Set Link manually up */ + SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Set manual full duplex Port %d\n", Port)); + } + + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg == SK_LIPA_AUTO && + pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) { + /* + * This is rather complicated. + * we need to check here whether the LIPA_AUTO + * we saw before is false alert. We saw at one + * switch ( SR8800) that on boot time it sends + * just one auto-neg packet and does no further + * auto-negotiation. + * Solution: we restart the autosensing after + * a few timeouts. + */ + pPrt->PAutoNegTOCt = 0; + pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; + SkHWInitDefSense(pAC, IoC, Port); + } + + /* Do the restart */ + return(SK_HW_PS_RESTART); + } + } + else { + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + /* + * Link sync (GP) and so assume a good connection. But if not received + * a bunch of frames received in a time slot (maybe broken tx cable) + * the port is restart. + */ + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpXmac */ + + +/****************************************************************************** + * + * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpBcom( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 PhyStat; /* Phy Status Register */ + SK_U16 ResAb; /* Master/Slave resolution */ + SK_U16 Ctrl; /* Broadcom control flags */ +#ifdef DEBUG + SK_U16 LpAb; + SK_U16 ExtStat; +#endif /* DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Check for No HCD Link events (#10523) */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc); + +#ifdef xDEBUG + if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) == + (PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) { + + SK_U32 Stat1, Stat2, Stat3; + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp1 - Stat: %x, Mask: %x", + (void *)Isrc, + (void *)Stat1); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "Ctrl/Stat: %x, AN Adv/LP: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + } +#endif /* DEBUG */ + + if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) { + /* + * Workaround BCom Errata: + * enable and disable loopback mode if "NO HCD" occurs. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, + (SK_U16)(Ctrl | PHY_CT_LOOP)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, + (SK_U16)(Ctrl & ~PHY_CT_LOOP)); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("No HCD Link event, Port %d\n", Port)); +#ifdef xDEBUG + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "No HCD link event, port %d.", + (void *)Port, + (void *)NULL); +#endif /* DEBUG */ + } + + /* Not obsolete: link status bit is latched to 0 and autoclearing! */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + +#ifdef xDEBUG + { + SK_U32 Stat1, Stat2, Stat3; + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp1a - Stat: %x, Mask: %x", + (void *)Isrc, + (void *)Stat1); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + Stat1 = Stat1 << 16 | PhyStat; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "Ctrl/Stat: %x, AN Adv/LP: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); + Stat2 = Stat2 << 16 | ResAb; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + } +#endif /* DEBUG */ + + /* + * Here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); + + if ((ResAb & PHY_B_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault port %d\n", Port)); + + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + + return(SK_HW_PS_RESTART); + } + + if ((PhyStat & PHY_ST_LSYNC) == 0) { + return(SK_HW_PS_NONE); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Port %d, ResAb: 0x%04X\n", Port, ResAb)); + + if (AutoNeg) { + if ((PhyStat & PHY_ST_AN_OVER) != 0) { + + SkHWLinkUp(pAC, IoC, Port); + + Done = SkMacAutoNegDone(pAC, IoC, Port); + + if (Done != SK_AND_OK) { +#ifdef DEBUG + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", + Port, LpAb, ExtStat)); +#endif /* DEBUG */ + return(SK_HW_PS_RESTART); + } + else { +#ifdef xDEBUG + /* Dummy read ISR to prevent extra link downs/ups */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); + + if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp2 - Stat: %x", + (void *)ExtStat, + (void *)NULL); + } +#endif /* DEBUG */ + return(SK_HW_PS_LINK); + } + } + } + else { /* !AutoNeg */ + /* Link is up and we don't need more. */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + +#ifdef xDEBUG + /* Dummy read ISR to prevent extra link downs/ups */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); + + if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp3 - Stat: %x", + (void *)ExtStat, + (void *)NULL); + } +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpGmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 PhyIsrc; /* PHY Interrupt source */ + SK_U16 PhyStat; /* PPY Status */ + SK_U16 PhySpecStat;/* PHY Specific Status */ + SK_U16 ResAb; /* Master/Slave resolution */ + SK_EVPARA Para; +#ifdef DEBUG + SK_U16 Word; /* I/O helper */ +#endif /* DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + + /* Read PHY Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); + + /* Read PHY Interrupt Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc); + + if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); + + if ((ResAb & PHY_B_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault port %d\n", Port)); + + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + + return(SK_HW_PS_RESTART); + } + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat)); + +#ifdef DEBUG + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word); + + if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 || + (PhySpecStat & PHY_M_PS_PAGE_REC) != 0) { + /* Read PHY Next Page Link Partner */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Page Received, NextPage: 0x%04X\n", Word)); + } +#endif /* DEBUG */ + + if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) { + return(SK_HW_PS_NONE); + } + + if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 || + (PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) { + /* Downshift detected */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG); + + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; + + pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7); + + if (AutoNeg) { + /* Auto-Negotiation Over ? */ + if ((PhyStat & PHY_ST_AN_OVER) != 0) { + + SkHWLinkUp(pAC, IoC, Port); + + Done = SkMacAutoNegDone(pAC, IoC, Port); + + if (Done != SK_AND_OK) { + return(SK_HW_PS_RESTART); + } + + return(SK_HW_PS_LINK); + } + } + else { /* !AutoNeg */ + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync, Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpGmac */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkGePortCheckUpLone() - Check if the link is up on Level One PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpLone( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 LpAb; /* Link Partner Ability */ + SK_U16 ExtStat; /* Extended Status Register */ + SK_U16 PhyStat; /* Phy Status Register */ + SK_U16 StatSum; + SK_U8 NextMode; /* Next AutoSensing Mode */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + + StatSum = pPrt->PIsave; + pPrt->PIsave = 0; + + /* + * here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat); + StatSum |= PhyStat; + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + if ((PhyStat & PHY_ST_LSYNC) == 0) { + /* Save Auto-negotiation Done bit */ + pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER); +#ifdef DEBUG + if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done rescheduled Port %d\n", Port)); + } +#endif /* DEBUG */ + return(SK_HW_PS_NONE); + } + + if (AutoNeg) { + if ((StatSum & PHY_ST_AN_OVER) != 0) { + SkHWLinkUp(pAC, IoC, Port); + Done = SkMacAutoNegDone(pAC, IoC, Port); + if (Done != SK_AND_OK) { + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", + Port, LpAb, ExtStat)); + + /* Try next possible mode */ + NextMode = SkHWSenseGetNext(pAC, IoC, Port); + SkHWLinkDown(pAC, IoC, Port); + if (Done == SK_AND_DUP_CAP) { + /* GoTo next mode */ + SkHWSenseSetNext(pAC, IoC, Port, NextMode); + } + + return(SK_HW_PS_RESTART); + + } + else { + /* + * Dummy Read interrupt status to prevent + * extra link down/ups + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); + return(SK_HW_PS_LINK); + } + } + + /* AutoNeg not done, but HW link is up. Check for timeouts */ + pPrt->PAutoNegTimeOut++; + if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { + /* Timeout occured */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoNeg timeout Port %d\n", Port)); + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { + /* Set Link manually up */ + SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Set manual full duplex Port %d\n", Port)); + } + + /* Do the restart */ + return(SK_HW_PS_RESTART); + } + } + else { + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + + /* + * Dummy Read interrupt status to prevent + * extra link down/ups + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpLone */ + + +/****************************************************************************** + * + * SkGePortCheckUpNat() - Check if the link is up on National PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpNat( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + /* todo: National */ + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkGeSirqEvent() - Event Service Routine + * + * Description: + * + * Notes: + */ +int SkGeSirqEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +SK_U32 Event, /* Module specific Event */ +SK_EVPARA Para) /* Event specific Parameter */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U32 Port; + SK_U32 Val32; + int PortStat; + SK_U8 Val8; +#ifdef GENESIS + SK_U64 Octets; +#endif /* GENESIS */ + + Port = Para.Para32[0]; + pPrt = &pAC->GIni.GP[Port]; + + switch (Event) { + case SK_HWEV_WATIM: + if (pPrt->PState == SK_PRT_RESET) { + + PortStat = SK_HW_PS_NONE; + } + else { + /* Check whether port came up */ + PortStat = SkGePortCheckUp(pAC, IoC, (int)Port); + } + + switch (PortStat) { + case SK_HW_PS_RESTART: + if (pPrt->PHWLinkUp) { + /* Set Link to down */ + SkHWLinkDown(pAC, IoC, (int)Port); + + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + /* Restart needed */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + break; + + case SK_HW_PS_LINK: + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para); + break; + } + + /* Start again the check Timer */ + if (pPrt->PHWLinkUp) { + Val32 = SK_WA_ACT_TIME; + } + else { + Val32 = SK_WA_INA_TIME; + } + + /* Todo: still needed for non-XMAC PHYs??? */ + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32, + SKGE_HWAC, SK_HWEV_WATIM, Para); + break; + + case SK_HWEV_PORT_START: + if (pPrt->PHWLinkUp) { + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + SkHWLinkDown(pAC, IoC, (int)Port); + + /* Schedule Port RESET */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + break; + + case SK_HWEV_PORT_STOP: + if (pPrt->PHWLinkUp) { + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + /* Stop Workaround Timer */ + SkTimerStop(pAC, IoC, &pPrt->PWaTimer); + + SkHWLinkDown(pAC, IoC, (int)Port); + break; + + case SK_HWEV_UPDATE_STAT: + /* We do NOT need to update any statistics */ + break; + + case SK_HWEV_CLEAR_STAT: + /* We do NOT need to clear any statistics */ + for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) { + pPrt->PPrevRx = 0; + pPrt->PPrevFcs = 0; + pPrt->PPrevShorts = 0; + } + break; + + case SK_HWEV_SET_LMODE: + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PLinkModeConf != Val8) { + /* Set New link mode */ + pPrt->PLinkModeConf = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_FLOWMODE: + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PFlowCtrlMode != Val8) { + /* Set New Flow Control mode */ + pPrt->PFlowCtrlMode = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_ROLE: + /* not possible for fiber */ + if (!pAC->GIni.GICopperType) { + break; + } + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PMSMode != Val8) { + /* Set New Role (Master/Slave) mode */ + pPrt->PMSMode = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_SPEED: + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + break; + } + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PLinkSpeed != Val8) { + /* Set New Speed parameter */ + pPrt->PLinkSpeed = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + +#ifdef GENESIS + case SK_HWEV_HALFDUP_CHK: + if (pAC->GIni.GIGenesis) { + /* + * half duplex hangup workaround. + * See packet arbiter timeout interrupt for description + */ + pPrt->HalfDupTimerActive = SK_FALSE; + if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) { + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, Port); + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32); + + Octets = (SK_U64)Val32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32); + + Octets += Val32; + + if (pPrt->LastOctets == Octets) { + /* Tx hanging, a FIFO flush restarts it */ + SkMacFlushTxFifo(pAC, IoC, Port); + } + } + } + break; +#endif /* GENESIS */ + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG); + break; + } + + return(0); +} /* SkGeSirqEvent */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkPhyIsrBcom() - PHY interrupt service routine + * + * Description: handles all interrupts from BCom PHY + * + * Returns: N/A + */ +static void SkPhyIsrBcom( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_EVPARA Para; + + pPrt = &pAC->GIni.GP[Port]; + + if ((IStatus & PHY_B_IS_PSE) != 0) { + /* Incorrectable pair swap error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022, + SKERR_SIRQ_E022MSG); + } + + if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) { + + SkHWLinkDown(pAC, IoC, Port); + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + } + +} /* SkPhyIsrBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkPhyIsrGmac() - PHY interrupt service routine + * + * Description: handles all interrupts from Marvell PHY + * + * Returns: N/A + */ +static void SkPhyIsrGmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_EVPARA Para; + SK_U16 Word; + + pPrt = &pAC->GIni.GP[Port]; + + if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) { + + SkHWLinkDown(pAC, IoC, Port); + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg.Adv: 0x%04X\n", Word)); + + /* Set Auto-negotiation advertisement */ + if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) { + /* restore Asymmetric Pause bit */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, + (SK_U16)(Word | PHY_M_AN_ASP)); + } + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((IStatus & PHY_M_IS_AN_ERROR) != 0) { + /* Auto-Negotiation Error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG); + } + + if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) { + /* FIFO Overflow/Underrun Error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG); + } + +} /* SkPhyIsrGmac */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkPhyIsrLone() - PHY interrupt service routine + * + * Description: handles all interrupts from LONE PHY + * + * Returns: N/A + */ +static void SkPhyIsrLone( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_EVPARA Para; + + if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) { + + SkHWLinkDown(pAC, IoC, Port); + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + +} /* SkPhyIsrLone */ +#endif /* OTHER_PHY */ + +/* End of File */ diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c new file mode 100644 index 00000000000..79bf57cb532 --- /dev/null +++ b/drivers/net/sk98lin/ski2c.c @@ -0,0 +1,1296 @@ +/****************************************************************************** + * + * Name: ski2c.c + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.59 $ + * Date: $Date: 2003/10/20 09:07:25 $ + * Purpose: Functions to access Voltage and Temperature Sensor + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * I2C Protocol + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: ski2c.c,v 1.59 2003/10/20 09:07:25 rschmidt Exp $ (C) Marvell. "; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/lm80.h" +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + I2C protocol implementation. + + General Description: + + The I2C protocol is used for the temperature sensors and for + the serial EEPROM which hold the configuration. + + This file covers functions that allow to read write and do + some bulk requests a specified I2C address. + + The Genesis has 2 I2C buses. One for the EEPROM which holds + the VPD Data and one for temperature and voltage sensor. + The following picture shows the I2C buses, I2C devices and + their control registers. + + Note: The VPD functions are in skvpd.c +. +. PCI Config I2C Bus for VPD Data: +. +. +------------+ +. | VPD EEPROM | +. +------------+ +. | +. | <-- I2C +. | +. +-----------+-----------+ +. | | +. +-----------------+ +-----------------+ +. | PCI_VPD_ADR_REG | | PCI_VPD_DAT_REG | +. +-----------------+ +-----------------+ +. +. +. I2C Bus for LM80 sensor: +. +. +-----------------+ +. | Temperature and | +. | Voltage Sensor | +. | LM80 | +. +-----------------+ +. | +. | +. I2C --> | +. | +. +----+ +. +-------------->| OR |<--+ +. | +----+ | +. +------+------+ | +. | | | +. +--------+ +--------+ +----------+ +. | B2_I2C | | B2_I2C | | B2_I2C | +. | _CTRL | | _DATA | | _SW | +. +--------+ +--------+ +----------+ +. + The I2C bus may be driven by the B2_I2C_SW or by the B2_I2C_CTRL + and B2_I2C_DATA registers. + For driver software it is recommended to use the I2C control and + data register, because I2C bus timing is done by the ASIC and + an interrupt may be received when the I2C request is completed. + + Clock Rate Timing: MIN MAX generated by + VPD EEPROM: 50 kHz 100 kHz HW + LM80 over I2C Ctrl/Data reg. 50 kHz 100 kHz HW + LM80 over B2_I2C_SW register 0 400 kHz SW + + Note: The clock generated by the hardware is dependend on the + PCI clock. If the PCI bus clock is 33 MHz, the I2C/VPD + clock is 50 kHz. + */ +intro() +{} +#endif + +#ifdef SK_DIAG +/* + * I2C Fast Mode timing values used by the LM80. + * If new devices are added to the I2C bus the timing values have to be checked. + */ +#ifndef I2C_SLOW_TIMING +#define T_CLK_LOW 1300L /* clock low time in ns */ +#define T_CLK_HIGH 600L /* clock high time in ns */ +#define T_DATA_IN_SETUP 100L /* data in Set-up Time */ +#define T_START_HOLD 600L /* start condition hold time */ +#define T_START_SETUP 600L /* start condition Set-up time */ +#define T_STOP_SETUP 600L /* stop condition Set-up time */ +#define T_BUS_IDLE 1300L /* time the bus must free after Tx */ +#define T_CLK_2_DATA_OUT 900L /* max. clock low to data output valid */ +#else /* I2C_SLOW_TIMING */ +/* I2C Standard Mode Timing */ +#define T_CLK_LOW 4700L /* clock low time in ns */ +#define T_CLK_HIGH 4000L /* clock high time in ns */ +#define T_DATA_IN_SETUP 250L /* data in Set-up Time */ +#define T_START_HOLD 4000L /* start condition hold time */ +#define T_START_SETUP 4700L /* start condition Set-up time */ +#define T_STOP_SETUP 4000L /* stop condition Set-up time */ +#define T_BUS_IDLE 4700L /* time the bus must free after Tx */ +#endif /* !I2C_SLOW_TIMING */ + +#define NS2BCLK(x) (((x)*125)/10000) + +/* + * I2C Wire Operations + * + * About I2C_CLK_LOW(): + * + * The Data Direction bit (I2C_DATA_DIR) has to be set to input when setting + * clock to low, to prevent the ASIC and the I2C data client from driving the + * serial data line simultaneously (ASIC: last bit of a byte = '1', I2C client + * send an 'ACK'). See also Concentrator Bugreport No. 10192. + */ +#define I2C_DATA_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA) +#define I2C_DATA_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA) +#define I2C_DATA_OUT(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA_DIR) +#define I2C_DATA_IN(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA) +#define I2C_CLK_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_CLK) +#define I2C_CLK_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK | I2C_DATA_DIR) +#define I2C_START_COND(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK) + +#define NS2CLKT(x) ((x*125L)/10000) + +/*--------------- I2C Interface Register Functions --------------- */ + +/* + * sending one bit + */ +void SkI2cSndBit( +SK_IOC IoC, /* I/O Context */ +SK_U8 Bit) /* Bit to send */ +{ + I2C_DATA_OUT(IoC); + if (Bit) { + I2C_DATA_HIGH(IoC); + } + else { + I2C_DATA_LOW(IoC); + } + SkDgWaitTime(IoC, NS2BCLK(T_DATA_IN_SETUP)); + I2C_CLK_HIGH(IoC); + SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); + I2C_CLK_LOW(IoC); +} /* SkI2cSndBit*/ + + +/* + * Signal a start to the I2C Bus. + * + * A start is signaled when data goes to low in a high clock cycle. + * + * Ends with Clock Low. + * + * Status: not tested + */ +void SkI2cStart( +SK_IOC IoC) /* I/O Context */ +{ + /* Init data and Clock to output lines */ + /* Set Data high */ + I2C_DATA_OUT(IoC); + I2C_DATA_HIGH(IoC); + /* Set Clock high */ + I2C_CLK_HIGH(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_START_SETUP)); + + /* Set Data Low */ + I2C_DATA_LOW(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_START_HOLD)); + + /* Clock low without Data to Input */ + I2C_START_COND(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW)); +} /* SkI2cStart */ + + +void SkI2cStop( +SK_IOC IoC) /* I/O Context */ +{ + /* Init data and Clock to output lines */ + /* Set Data low */ + I2C_DATA_OUT(IoC); + I2C_DATA_LOW(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT)); + + /* Set Clock high */ + I2C_CLK_HIGH(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_STOP_SETUP)); + + /* + * Set Data High: Do it by setting the Data Line to Input. + * Because of a pull up resistor the Data Line + * floods to high. + */ + I2C_DATA_IN(IoC); + + /* + * When I2C activity is stopped + * o DATA should be set to input and + * o CLOCK should be set to high! + */ + SkDgWaitTime(IoC, NS2BCLK(T_BUS_IDLE)); +} /* SkI2cStop */ + + +/* + * Receive just one bit via the I2C bus. + * + * Note: Clock must be set to LOW before calling this function. + * + * Returns The received bit. + */ +int SkI2cRcvBit( +SK_IOC IoC) /* I/O Context */ +{ + int Bit; + SK_U8 I2cSwCtrl; + + /* Init data as input line */ + I2C_DATA_IN(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT)); + + I2C_CLK_HIGH(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); + + SK_I2C_GET_SW(IoC, &I2cSwCtrl); + + Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0; + + I2C_CLK_LOW(IoC); + SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW-T_CLK_2_DATA_OUT)); + + return(Bit); +} /* SkI2cRcvBit */ + + +/* + * Receive an ACK. + * + * returns 0 If acknowledged + * 1 in case of an error + */ +int SkI2cRcvAck( +SK_IOC IoC) /* I/O Context */ +{ + /* + * Received bit must be zero. + */ + return(SkI2cRcvBit(IoC) != 0); +} /* SkI2cRcvAck */ + + +/* + * Send an NACK. + */ +void SkI2cSndNAck( +SK_IOC IoC) /* I/O Context */ +{ + /* + * Received bit must be zero. + */ + SkI2cSndBit(IoC, 1); +} /* SkI2cSndNAck */ + + +/* + * Send an ACK. + */ +void SkI2cSndAck( +SK_IOC IoC) /* I/O Context */ +{ + /* + * Received bit must be zero. + */ + SkI2cSndBit(IoC, 0); +} /* SkI2cSndAck */ + + +/* + * Send one byte to the I2C device and wait for ACK. + * + * Return acknowleged status. + */ +int SkI2cSndByte( +SK_IOC IoC, /* I/O Context */ +int Byte) /* byte to send */ +{ + int i; + + for (i = 0; i < 8; i++) { + if (Byte & (1<<(7-i))) { + SkI2cSndBit(IoC, 1); + } + else { + SkI2cSndBit(IoC, 0); + } + } + + return(SkI2cRcvAck(IoC)); +} /* SkI2cSndByte */ + + +/* + * Receive one byte and ack it. + * + * Return byte. + */ +int SkI2cRcvByte( +SK_IOC IoC, /* I/O Context */ +int Last) /* Last Byte Flag */ +{ + int i; + int Byte = 0; + + for (i = 0; i < 8; i++) { + Byte <<= 1; + Byte |= SkI2cRcvBit(IoC); + } + + if (Last) { + SkI2cSndNAck(IoC); + } + else { + SkI2cSndAck(IoC); + } + + return(Byte); +} /* SkI2cRcvByte */ + + +/* + * Start dialog and send device address + * + * Return 0 if acknowleged, 1 in case of an error + */ +int SkI2cSndDev( +SK_IOC IoC, /* I/O Context */ +int Addr, /* Device Address */ +int Rw) /* Read / Write Flag */ +{ + SkI2cStart(IoC); + Rw = ~Rw; + Rw &= I2C_WRITE; + return(SkI2cSndByte(IoC, (Addr<<1) | Rw)); +} /* SkI2cSndDev */ + +#endif /* SK_DIAG */ + +/*----------------- I2C CTRL Register Functions ----------*/ + +/* + * waits for a completion of an I2C transfer + * + * returns 0: success, transfer completes + * 1: error, transfer does not complete, I2C transfer + * killed, wait loop terminated. + */ +static int SkI2cWait( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */ +{ + SK_U64 StartTime; + SK_U64 CurrentTime; + SK_U32 I2cCtrl; + + StartTime = SkOsGetTime(pAC); + + do { + CurrentTime = SkOsGetTime(pAC); + + if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) { + + SK_I2C_STOP(IoC); +#ifndef SK_DIAG + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG); +#endif /* !SK_DIAG */ + return(1); + } + + SK_I2C_GET_CTL(IoC, &I2cCtrl); + +#ifdef xYUKON_DBG + printf("StartTime=%lu, CurrentTime=%lu\n", + StartTime, CurrentTime); + if (kbhit()) { + return(1); + } +#endif /* YUKON_DBG */ + + } while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31); + + return(0); +} /* SkI2cWait */ + + +/* + * waits for a completion of an I2C transfer + * + * Returns + * Nothing + */ +void SkI2cWaitIrq( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + SK_SENSOR *pSen; + SK_U64 StartTime; + SK_U32 IrqSrc; + + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + + if (pSen->SenState == SK_SEN_IDLE) { + return; + } + + StartTime = SkOsGetTime(pAC); + + do { + if (SkOsGetTime(pAC) - StartTime > SK_TICKS_PER_SEC / 8) { + + SK_I2C_STOP(IoC); +#ifndef SK_DIAG + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E016, SKERR_I2C_E016MSG); +#endif /* !SK_DIAG */ + return; + } + + SK_IN32(IoC, B0_ISRC, &IrqSrc); + + } while ((IrqSrc & IS_I2C_READY) == 0); + + pSen->SenState = SK_SEN_IDLE; + return; +} /* SkI2cWaitIrq */ + +/* + * writes a single byte or 4 bytes into the I2C device + * + * returns 0: success + * 1: error + */ +static int SkI2cWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 I2cData, /* I2C Data to write */ +int I2cDev, /* I2C Device Address */ +int I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */ +int I2cReg, /* I2C Device Register Address */ +int I2cBurst) /* I2C Burst Flag */ +{ + SK_OUT32(IoC, B2_I2C_DATA, I2cData); + + SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cDevSize, I2cReg, I2cBurst); + + return(SkI2cWait(pAC, IoC, I2C_WRITE)); +} /* SkI2cWrite*/ + + +#ifdef SK_DIAG +/* + * reads a single byte or 4 bytes from the I2C device + * + * returns the word read + */ +SK_U32 SkI2cRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int I2cDev, /* I2C Device Address */ +int I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */ +int I2cReg, /* I2C Device Register Address */ +int I2cBurst) /* I2C Burst Flag */ +{ + SK_U32 Data; + + SK_OUT32(IoC, B2_I2C_DATA, 0); + SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cDevSize, I2cReg, I2cBurst); + + if (SkI2cWait(pAC, IoC, I2C_READ) != 0) { + w_print("%s\n", SKERR_I2C_E002MSG); + } + + SK_IN32(IoC, B2_I2C_DATA, &Data); + + return(Data); +} /* SkI2cRead */ +#endif /* SK_DIAG */ + + +/* + * read a sensor's value + * + * This function reads a sensor's value from the I2C sensor chip. The sensor + * is defined by its index into the sensors database in the struct pAC points + * to. + * Returns + * 1 if the read is completed + * 0 if the read must be continued (I2C Bus still allocated) + */ +static int SkI2cReadSensor( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_SENSOR *pSen) /* Sensor to be read */ +{ + if (pSen->SenRead != NULL) { + return((*pSen->SenRead)(pAC, IoC, pSen)); + } + else { + return(0); /* no success */ + } +} /* SkI2cReadSensor */ + +/* + * Do the Init state 0 initialization + */ +static int SkI2cInit0( +SK_AC *pAC) /* Adapter Context */ +{ + int i; + + /* Begin with first sensor */ + pAC->I2c.CurrSens = 0; + + /* Begin with timeout control for state machine */ + pAC->I2c.TimerMode = SK_TIMER_WATCH_SM; + + /* Set sensor number to zero */ + pAC->I2c.MaxSens = 0; + +#ifndef SK_DIAG + /* Initialize Number of Dummy Reads */ + pAC->I2c.DummyReads = SK_MAX_SENSORS; +#endif + + for (i = 0; i < SK_MAX_SENSORS; i++) { + pAC->I2c.SenTable[i].SenDesc = "unknown"; + pAC->I2c.SenTable[i].SenType = SK_SEN_UNKNOWN; + pAC->I2c.SenTable[i].SenThreErrHigh = 0; + pAC->I2c.SenTable[i].SenThreErrLow = 0; + pAC->I2c.SenTable[i].SenThreWarnHigh = 0; + pAC->I2c.SenTable[i].SenThreWarnLow = 0; + pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN; + pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_NONE; + pAC->I2c.SenTable[i].SenValue = 0; + pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_NOT_PRESENT; + pAC->I2c.SenTable[i].SenErrCts = 0; + pAC->I2c.SenTable[i].SenBegErrTS = 0; + pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE; + pAC->I2c.SenTable[i].SenRead = NULL; + pAC->I2c.SenTable[i].SenDev = 0; + } + + /* Now we are "INIT data"ed */ + pAC->I2c.InitLevel = SK_INIT_DATA; + return(0); +} /* SkI2cInit0*/ + + +/* + * Do the init state 1 initialization + * + * initialize the following register of the LM80: + * Configuration register: + * - START, noINT, activeLOW, noINT#Clear, noRESET, noCI, noGPO#, noINIT + * + * Interrupt Mask Register 1: + * - all interrupts are Disabled (0xff) + * + * Interrupt Mask Register 2: + * - all interrupts are Disabled (0xff) Interrupt modi doesn't matter. + * + * Fan Divisor/RST_OUT register: + * - Divisors set to 1 (bits 00), all others 0s. + * + * OS# Configuration/Temperature resolution Register: + * - all 0s + * + */ +static int SkI2cInit1( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + int i; + SK_U8 I2cSwCtrl; + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + if (pAC->I2c.InitLevel != SK_INIT_DATA) { + /* ReInit not needed in I2C module */ + return(0); + } + + /* Set the Direction of I2C-Data Pin to IN */ + SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA); + /* Check for 32-Bit Yukon with Low at I2C-Data Pin */ + SK_I2C_GET_SW(IoC, &I2cSwCtrl); + + if ((I2cSwCtrl & I2C_DATA) == 0) { + /* this is a 32-Bit board */ + pAC->GIni.GIYukon32Bit = SK_TRUE; + return(0); + } + + /* Check for 64 Bit Yukon without sensors */ + if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_CFG, 0) != 0) { + return(0); + } + + (void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_1, 0); + + (void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_2, 0); + + (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_FAN_CTRL, 0); + + (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_TEMP_CTRL, 0); + + (void)SkI2cWrite(pAC, IoC, (SK_U32)LM80_CFG_START, LM80_ADDR, I2C_025K_DEV, + LM80_CFG, 0); + + /* + * MaxSens has to be updated here, because PhyType is not + * set when performing Init Level 0 + */ + pAC->I2c.MaxSens = 5; + + pPrt = &pAC->GIni.GP[0]; + + if (pAC->GIni.GIGenesis) { + if (pPrt->PhyType == SK_PHY_BCOM) { + if (pAC->GIni.GIMacsFound == 1) { + pAC->I2c.MaxSens += 1; + } + else { + pAC->I2c.MaxSens += 3; + } + } + } + else { + pAC->I2c.MaxSens += 3; + } + + for (i = 0; i < pAC->I2c.MaxSens; i++) { + switch (i) { + case 0: + pAC->I2c.SenTable[i].SenDesc = "Temperature"; + pAC->I2c.SenTable[i].SenType = SK_SEN_TEMP; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_TEMP_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_TEMP_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_TEMP_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_TEMP_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_TEMP_IN; + break; + case 1: + pAC->I2c.SenTable[i].SenDesc = "Voltage PCI"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_5V_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_5V_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_5V_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_5V_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT0_IN; + break; + case 2: + pAC->I2c.SenTable[i].SenDesc = "Voltage PCI-IO"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_IO_5V_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_IO_5V_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_IO_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_IO_3V3_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT1_IN; + pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_PCI_IO; + break; + case 3: + pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VDD_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VDD_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VDD_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VDD_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT2_IN; + break; + case 4: + if (pAC->GIni.GIGenesis) { + if (pPrt->PhyType == SK_PHY_BCOM) { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY A PLL"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage PMA"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; + } + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage VAUX"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VAUX_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VAUX_3V3_HIGH_WARN; + if (pAC->GIni.GIVauxAvail) { + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR; + } + else { + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_0V_WARN_ERR; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_0V_WARN_ERR; + } + } + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenReg = LM80_VT3_IN; + break; + case 5: + if (pAC->GIni.GIGenesis) { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage Core 1V5"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_CORE_1V5_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_CORE_1V5_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_CORE_1V5_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_CORE_1V5_LOW_ERR; + } + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenReg = LM80_VT4_IN; + break; + case 6: + if (pAC->GIni.GIGenesis) { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY B PLL"; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 3V3"; + } + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT5_IN; + break; + case 7: + if (pAC->GIni.GIGenesis) { + pAC->I2c.SenTable[i].SenDesc = "Speed Fan"; + pAC->I2c.SenTable[i].SenType = SK_SEN_FAN; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_FAN_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_FAN_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_FAN_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_FAN_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT6_IN; + } + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_INIT | SK_ERRCL_SW, + SKERR_I2C_E001, SKERR_I2C_E001MSG); + break; + } + + pAC->I2c.SenTable[i].SenValue = 0; + pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK; + pAC->I2c.SenTable[i].SenErrCts = 0; + pAC->I2c.SenTable[i].SenBegErrTS = 0; + pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE; + pAC->I2c.SenTable[i].SenRead = SkLm80ReadSensor; + pAC->I2c.SenTable[i].SenDev = LM80_ADDR; + } + +#ifndef SK_DIAG + pAC->I2c.DummyReads = pAC->I2c.MaxSens; +#endif /* !SK_DIAG */ + + /* Clear I2C IRQ */ + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); + + /* Now we are I/O initialized */ + pAC->I2c.InitLevel = SK_INIT_IO; + return(0); +} /* SkI2cInit1 */ + + +/* + * Init level 2: Start first sensor read. + */ +static int SkI2cInit2( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + int ReadComplete; + SK_SENSOR *pSen; + + if (pAC->I2c.InitLevel != SK_INIT_IO) { + /* ReInit not needed in I2C module */ + /* Init0 and Init2 not permitted */ + return(0); + } + + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); + + if (ReadComplete) { + SK_ERR_LOG(pAC, SK_ERRCL_INIT, SKERR_I2C_E008, SKERR_I2C_E008MSG); + } + + /* Now we are correctly initialized */ + pAC->I2c.InitLevel = SK_INIT_RUN; + + return(0); +} /* SkI2cInit2*/ + + +/* + * Initialize I2C devices + * + * Get the first voltage value and discard it. + * Go into temperature read mode. A default pointer is not set. + * + * The things to be done depend on the init level in the parameter list: + * Level 0: + * Initialize only the data structures. Do NOT access hardware. + * Level 1: + * Initialize hardware through SK_IN / SK_OUT commands. Do NOT use interrupts. + * Level 2: + * Everything is possible. Interrupts may be used from now on. + * + * return: + * 0 = success + * other = error. + */ +int SkI2cInit( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context needed in levels 1 and 2 */ +int Level) /* Init Level */ +{ + + switch (Level) { + case SK_INIT_DATA: + return(SkI2cInit0(pAC)); + case SK_INIT_IO: + return(SkI2cInit1(pAC, IoC)); + case SK_INIT_RUN: + return(SkI2cInit2(pAC, IoC)); + default: + break; + } + + return(0); +} /* SkI2cInit */ + + +#ifndef SK_DIAG + +/* + * Interrupt service function for the I2C Interface + * + * Clears the Interrupt source + * + * Reads the register and check it for sending a trap. + * + * Starts the timer if necessary. + */ +void SkI2cIsr( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + SK_EVPARA Para; + + /* Clear I2C IRQ */ + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); + + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_IRQ, Para); +} /* SkI2cIsr */ + + +/* + * Check this sensors Value against the threshold and send events. + */ +static void SkI2cCheckSensor( +SK_AC *pAC, /* Adapter Context */ +SK_SENSOR *pSen) +{ + SK_EVPARA ParaLocal; + SK_BOOL TooHigh; /* Is sensor too high? */ + SK_BOOL TooLow; /* Is sensor too low? */ + SK_U64 CurrTime; /* Current Time */ + SK_BOOL DoTrapSend; /* We need to send a trap */ + SK_BOOL DoErrLog; /* We need to log the error */ + SK_BOOL IsError; /* We need to log the error */ + + /* Check Dummy Reads first */ + if (pAC->I2c.DummyReads > 0) { + pAC->I2c.DummyReads--; + return; + } + + /* Get the current time */ + CurrTime = SkOsGetTime(pAC); + + /* Set para to the most useful setting: The current sensor. */ + ParaLocal.Para64 = (SK_U64)pAC->I2c.CurrSens; + + /* Check the Value against the thresholds. First: Error Thresholds */ + TooHigh = (pSen->SenValue > pSen->SenThreErrHigh); + TooLow = (pSen->SenValue < pSen->SenThreErrLow); + + IsError = SK_FALSE; + if (TooHigh || TooLow) { + /* Error condition is satisfied */ + DoTrapSend = SK_TRUE; + DoErrLog = SK_TRUE; + + /* Now error condition is satisfied */ + IsError = SK_TRUE; + + if (pSen->SenErrFlag == SK_SEN_ERR_ERR) { + /* This state is the former one */ + + /* So check first whether we have to send a trap */ + if (pSen->SenLastErrTrapTS + SK_SEN_ERR_TR_HOLD > + CurrTime) { + /* + * Do NOT send the Trap. The hold back time + * has to run out first. + */ + DoTrapSend = SK_FALSE; + } + + /* Check now whether we have to log an Error */ + if (pSen->SenLastErrLogTS + SK_SEN_ERR_LOG_HOLD > + CurrTime) { + /* + * Do NOT log the error. The hold back time + * has to run out first. + */ + DoErrLog = SK_FALSE; + } + } + else { + /* We came from a different state -> Set Begin Time Stamp */ + pSen->SenBegErrTS = CurrTime; + pSen->SenErrFlag = SK_SEN_ERR_ERR; + } + + if (DoTrapSend) { + /* Set current Time */ + pSen->SenLastErrTrapTS = CurrTime; + pSen->SenErrCts++; + + /* Queue PNMI Event */ + SkEventQueue(pAC, SKGE_PNMI, (TooHigh ? + SK_PNMI_EVT_SEN_ERR_UPP : + SK_PNMI_EVT_SEN_ERR_LOW), + ParaLocal); + } + + if (DoErrLog) { + /* Set current Time */ + pSen->SenLastErrLogTS = CurrTime; + + if (pSen->SenType == SK_SEN_TEMP) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E011, SKERR_I2C_E011MSG); + } + else if (pSen->SenType == SK_SEN_VOLT) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E012, SKERR_I2C_E012MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E015, SKERR_I2C_E015MSG); + } + } + } + + /* Check the Value against the thresholds */ + /* 2nd: Warning thresholds */ + TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh); + TooLow = (pSen->SenValue < pSen->SenThreWarnLow); + + if (!IsError && (TooHigh || TooLow)) { + /* Error condition is satisfied */ + DoTrapSend = SK_TRUE; + DoErrLog = SK_TRUE; + + if (pSen->SenErrFlag == SK_SEN_ERR_WARN) { + /* This state is the former one */ + + /* So check first whether we have to send a trap */ + if (pSen->SenLastWarnTrapTS + SK_SEN_WARN_TR_HOLD > CurrTime) { + /* + * Do NOT send the Trap. The hold back time + * has to run out first. + */ + DoTrapSend = SK_FALSE; + } + + /* Check now whether we have to log an Error */ + if (pSen->SenLastWarnLogTS + SK_SEN_WARN_LOG_HOLD > CurrTime) { + /* + * Do NOT log the error. The hold back time + * has to run out first. + */ + DoErrLog = SK_FALSE; + } + } + else { + /* We came from a different state -> Set Begin Time Stamp */ + pSen->SenBegWarnTS = CurrTime; + pSen->SenErrFlag = SK_SEN_ERR_WARN; + } + + if (DoTrapSend) { + /* Set current Time */ + pSen->SenLastWarnTrapTS = CurrTime; + pSen->SenWarnCts++; + + /* Queue PNMI Event */ + SkEventQueue(pAC, SKGE_PNMI, (TooHigh ? + SK_PNMI_EVT_SEN_WAR_UPP : + SK_PNMI_EVT_SEN_WAR_LOW), + ParaLocal); + } + + if (DoErrLog) { + /* Set current Time */ + pSen->SenLastWarnLogTS = CurrTime; + + if (pSen->SenType == SK_SEN_TEMP) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E009, SKERR_I2C_E009MSG); + } + else if (pSen->SenType == SK_SEN_VOLT) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E010, SKERR_I2C_E010MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E014, SKERR_I2C_E014MSG); + } + } + } + + /* Check for NO error at all */ + if (!IsError && !TooHigh && !TooLow) { + /* Set o.k. Status if no error and no warning condition */ + pSen->SenErrFlag = SK_SEN_ERR_OK; + } + + /* End of check against the thresholds */ + + /* Bug fix AF: 16.Aug.2001: Correct the init base + * of LM80 sensor. + */ + if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) { + + pSen->SenInit = SK_SEN_DYN_INIT_NONE; + + if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) { + /* 5V PCI-IO Voltage */ + pSen->SenThreWarnLow = SK_SEN_PCI_IO_5V_LOW_WARN; + pSen->SenThreErrLow = SK_SEN_PCI_IO_5V_LOW_ERR; + } + else { + /* 3.3V PCI-IO Voltage */ + pSen->SenThreWarnHigh = SK_SEN_PCI_IO_3V3_HIGH_WARN; + pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR; + } + } + +#ifdef TEST_ONLY + /* Dynamic thresholds also for VAUX of LM80 sensor */ + if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) { + + pSen->SenInit = SK_SEN_DYN_INIT_NONE; + + /* 3.3V VAUX Voltage */ + if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) { + pSen->SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN; + pSen->SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR; + } + /* 0V VAUX Voltage */ + else { + pSen->SenThreWarnHigh = SK_SEN_VAUX_0V_WARN_ERR; + pSen->SenThreErrHigh = SK_SEN_VAUX_0V_WARN_ERR; + } + } + + /* + * Check initialization state: + * The VIO Thresholds need adaption + */ + if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN && + pSen->SenValue > SK_SEN_WARNLOW2C && + pSen->SenValue < SK_SEN_WARNHIGH2) { + pSen->SenThreErrLow = SK_SEN_ERRLOW2C; + pSen->SenThreWarnLow = SK_SEN_WARNLOW2C; + pSen->SenInit = SK_TRUE; + } + + if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN && + pSen->SenValue > SK_SEN_WARNLOW2 && + pSen->SenValue < SK_SEN_WARNHIGH2C) { + pSen->SenThreErrHigh = SK_SEN_ERRHIGH2C; + pSen->SenThreWarnHigh = SK_SEN_WARNHIGH2C; + pSen->SenInit = SK_TRUE; + } +#endif + + if (pSen->SenInit != SK_SEN_DYN_INIT_NONE) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E013, SKERR_I2C_E013MSG); + } +} /* SkI2cCheckSensor */ + + +/* + * The only Event to be served is the timeout event + * + */ +int SkI2cEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Event, /* Module specific Event */ +SK_EVPARA Para) /* Event specific Parameter */ +{ + int ReadComplete; + SK_SENSOR *pSen; + SK_U32 Time; + SK_EVPARA ParaLocal; + int i; + + /* New case: no sensors */ + if (pAC->I2c.MaxSens == 0) { + return(0); + } + + switch (Event) { + case SK_I2CEV_IRQ: + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); + + if (ReadComplete) { + /* Check sensor against defined thresholds */ + SkI2cCheckSensor(pAC, pSen); + + /* Increment Current sensor and set appropriate Timeout */ + pAC->I2c.CurrSens++; + if (pAC->I2c.CurrSens >= pAC->I2c.MaxSens) { + pAC->I2c.CurrSens = 0; + Time = SK_I2C_TIM_LONG; + } + else { + Time = SK_I2C_TIM_SHORT; + } + + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + else { + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_WATCH_SM; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + break; + case SK_I2CEV_TIM: + if (pAC->I2c.TimerMode == SK_TIMER_NEW_GAUGING) { + + ParaLocal.Para64 = (SK_U64)0; + SkTimerStop(pAC, IoC, &pAC->I2c.SenTimer); + + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); + + if (ReadComplete) { + /* Check sensor against defined thresholds */ + SkI2cCheckSensor(pAC, pSen); + + /* Increment Current sensor and set appropriate Timeout */ + pAC->I2c.CurrSens++; + if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) { + pAC->I2c.CurrSens = 0; + Time = SK_I2C_TIM_LONG; + } + else { + Time = SK_I2C_TIM_SHORT; + } + + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + } + else { + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + pSen->SenErrFlag = SK_SEN_ERR_FAULTY; + SK_I2C_STOP(IoC); + + /* Increment Current sensor and set appropriate Timeout */ + pAC->I2c.CurrSens++; + if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) { + pAC->I2c.CurrSens = 0; + Time = SK_I2C_TIM_LONG; + } + else { + Time = SK_I2C_TIM_SHORT; + } + + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + break; + case SK_I2CEV_CLEAR: + for (i = 0; i < SK_MAX_SENSORS; i++) { + pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK; + pAC->I2c.SenTable[i].SenErrCts = 0; + pAC->I2c.SenTable[i].SenWarnCts = 0; + pAC->I2c.SenTable[i].SenBegErrTS = 0; + pAC->I2c.SenTable[i].SenBegWarnTS = 0; + pAC->I2c.SenTable[i].SenLastErrTrapTS = (SK_U64)0; + pAC->I2c.SenTable[i].SenLastErrLogTS = (SK_U64)0; + pAC->I2c.SenTable[i].SenLastWarnTrapTS = (SK_U64)0; + pAC->I2c.SenTable[i].SenLastWarnLogTS = (SK_U64)0; + } + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E006, SKERR_I2C_E006MSG); + } + + return(0); +} /* SkI2cEvent*/ + +#endif /* !SK_DIAG */ diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c new file mode 100644 index 00000000000..a204f5bb55d --- /dev/null +++ b/drivers/net/sk98lin/sklm80.c @@ -0,0 +1,141 @@ +/****************************************************************************** + * + * Name: sklm80.c + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.22 $ + * Date: $Date: 2003/10/20 09:08:21 $ + * Purpose: Functions to access Voltage and Temperature Sensor (LM80) + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + LM80 functions +*/ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. "; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/lm80.h" +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#define BREAK_OR_WAIT(pAC,IoC,Event) break + +/* + * read a sensors value (LM80 specific) + * + * This function reads a sensors value from the I2C sensor chip LM80. + * The sensor is defined by its index into the sensors database in the struct + * pAC points to. + * + * Returns 1 if the read is completed + * 0 if the read must be continued (I2C Bus still allocated) + */ +int SkLm80ReadSensor( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context needed in level 1 and 2 */ +SK_SENSOR *pSen) /* Sensor to be read */ +{ + SK_I32 Value; + + switch (pSen->SenState) { + case SK_SEN_IDLE: + /* Send address to ADDR register */ + SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0); + + pSen->SenState = SK_SEN_VALUE ; + BREAK_OR_WAIT(pAC, IoC, I2C_READ); + + case SK_SEN_VALUE: + /* Read value from data register */ + SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); + + Value &= 0xff; /* only least significant byte is valid */ + + /* Do NOT check the Value against the thresholds */ + /* Checking is done in the calling instance */ + + if (pSen->SenType == SK_SEN_VOLT) { + /* Voltage sensor */ + pSen->SenValue = Value * SK_LM80_VT_LSB; + pSen->SenState = SK_SEN_IDLE ; + return(1); + } + + if (pSen->SenType == SK_SEN_FAN) { + if (Value != 0 && Value != 0xff) { + /* Fan speed counter */ + pSen->SenValue = SK_LM80_FAN_FAKTOR/Value; + } + else { + /* Indicate Fan error */ + pSen->SenValue = 0; + } + pSen->SenState = SK_SEN_IDLE ; + return(1); + } + + /* First: correct the value: it might be negative */ + if ((Value & 0x80) != 0) { + /* Value is negative */ + Value = Value - 256; + } + + /* We have a temperature sensor and need to get the signed extension. + * For now we get the extension from the last reading, so in the normal + * case we won't see flickering temperatures. + */ + pSen->SenValue = (Value * SK_LM80_TEMP_LSB) + + (pSen->SenValue % SK_LM80_TEMP_LSB); + + /* Send address to ADDR register */ + SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0); + + pSen->SenState = SK_SEN_VALEXT ; + BREAK_OR_WAIT(pAC, IoC, I2C_READ); + + case SK_SEN_VALEXT: + /* Read value from data register */ + SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); + Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */ + + /* cut the LSB bit */ + pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) * + SK_LM80_TEMP_LSB); + + if (pSen->SenValue < 0) { + /* Value negative: The bit value must be subtracted */ + pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB); + } + else { + /* Value positive: The bit value must be added */ + pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB); + } + + pSen->SenState = SK_SEN_IDLE ; + return(1); + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG); + return(1); + } + + /* Not completed */ + return(0); +} + diff --git a/drivers/net/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c new file mode 100644 index 00000000000..0275b4f71d9 --- /dev/null +++ b/drivers/net/sk98lin/skqueue.c @@ -0,0 +1,179 @@ +/****************************************************************************** + * + * Name: skqueue.c + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.20 $ + * Date: $Date: 2003/09/16 13:44:00 $ + * Purpose: Management of an event queue. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + +/* + * Event queue and dispatcher + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skqueue.c,v 1.20 2003/09/16 13:44:00 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/skqueue.h" /* Queue Definitions */ +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + Event queue management. + + General Description: + + */ +intro() +{} +#endif + +#define PRINTF(a,b,c) + +/* + * init event queue management + * + * Must be called during init level 0. + */ +void SkEventInit( +SK_AC *pAC, /* Adapter context */ +SK_IOC Ioc, /* IO context */ +int Level) /* Init level */ +{ + switch (Level) { + case SK_INIT_DATA: + pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue; + break; + default: + break; + } +} + +/* + * add event to queue + */ +void SkEventQueue( +SK_AC *pAC, /* Adapters context */ +SK_U32 Class, /* Event Class */ +SK_U32 Event, /* Event to be queued */ +SK_EVPARA Para) /* Event parameter */ +{ + pAC->Event.EvPut->Class = Class; + pAC->Event.EvPut->Event = Event; + pAC->Event.EvPut->Para = Para; + + if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT]) + pAC->Event.EvPut = pAC->Event.EvQueue; + + if (pAC->Event.EvPut == pAC->Event.EvGet) { + SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG); + } +} + +/* + * event dispatcher + * while event queue is not empty + * get event from queue + * send command to state machine + * end + * return error reported by individual Event function + * 0 if no error occured. + */ +int SkEventDispatcher( +SK_AC *pAC, /* Adapters Context */ +SK_IOC Ioc) /* Io context */ +{ + SK_EVENTELEM *pEv; /* pointer into queue */ + SK_U32 Class; + int Rtv; + + pEv = pAC->Event.EvGet; + + PRINTF("dispatch get %x put %x\n", pEv, pAC->Event.ev_put); + + while (pEv != pAC->Event.EvPut) { + PRINTF("dispatch Class %d Event %d\n", pEv->Class, pEv->Event); + + switch (Class = pEv->Class) { +#ifndef SK_USE_LAC_EV +#ifndef SK_SLIM + case SKGE_RLMT: /* RLMT Event */ + Rtv = SkRlmtEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_I2C: /* I2C Event */ + Rtv = SkI2cEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_PNMI: /* PNMI Event */ + Rtv = SkPnmiEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* not SK_SLIM */ +#endif /* not SK_USE_LAC_EV */ + case SKGE_DRV: /* Driver Event */ + Rtv = SkDrvEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#ifndef SK_USE_SW_TIMER + case SKGE_HWAC: + Rtv = SkGeSirqEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#else /* !SK_USE_SW_TIMER */ + case SKGE_SWT : + Rtv = SkSwtEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* !SK_USE_SW_TIMER */ +#ifdef SK_USE_LAC_EV + case SKGE_LACP : + Rtv = SkLacpEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_RSF : + Rtv = SkRsfEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_MARKER : + Rtv = SkMarkerEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_FD : + Rtv = SkFdEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* SK_USE_LAC_EV */ +#ifdef SK_USE_CSUM + case SKGE_CSUM : + Rtv = SkCsEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* SK_USE_CSUM */ + default : + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002, SKERR_Q_E002MSG); + Rtv = 0; + } + + if (Rtv != 0) { + return(Rtv); + } + + if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT]) + pEv = pAC->Event.EvQueue; + + /* Renew get: it is used in queue_events to detect overruns */ + pAC->Event.EvGet = pEv; + } + + return(0); +} + +/* End of file */ diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c new file mode 100644 index 00000000000..be8d1ccddf6 --- /dev/null +++ b/drivers/net/sk98lin/skrlmt.c @@ -0,0 +1,3257 @@ +/****************************************************************************** + * + * Name: skrlmt.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.69 $ + * Date: $Date: 2003/04/15 09:39:22 $ + * Purpose: Manage links on SK-NET Adapters, esp. redundant ones. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module contains code for Link ManagemenT (LMT) of SK-NET Adapters. + * It is mainly intended for adapters with more than one link. + * For such adapters, this module realizes Redundant Link ManagemenT (RLMT). + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef lint +static const char SysKonnectFileId[] = + "@(#) $Id: skrlmt.c,v 1.69 2003/04/15 09:39:22 tschilli Exp $ (C) Marvell."; +#endif /* !defined(lint) */ + +#define __SKRLMT_C + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* defines ********************************************************************/ + +#ifndef SK_HWAC_LINK_LED +#define SK_HWAC_LINK_LED(a,b,c,d) +#endif /* !defined(SK_HWAC_LINK_LED) */ + +#ifndef DEBUG +#define RLMT_STATIC static +#else /* DEBUG */ +#define RLMT_STATIC + +#ifndef SK_LITTLE_ENDIAN +/* First 32 bits */ +#define OFFS_LO32 1 + +/* Second 32 bits */ +#define OFFS_HI32 0 +#else /* SK_LITTLE_ENDIAN */ +/* First 32 bits */ +#define OFFS_LO32 0 + +/* Second 32 bits */ +#define OFFS_HI32 1 +#endif /* SK_LITTLE_ENDIAN */ + +#endif /* DEBUG */ + +/* ----- Private timeout values ----- */ + +#define SK_RLMT_MIN_TO_VAL 125000 /* 1/8 sec. */ +#define SK_RLMT_DEF_TO_VAL 1000000 /* 1 sec. */ +#define SK_RLMT_PORTDOWN_TIM_VAL 900000 /* another 0.9 sec. */ +#define SK_RLMT_PORTSTART_TIM_VAL 100000 /* 0.1 sec. */ +#define SK_RLMT_PORTUP_TIM_VAL 2500000 /* 2.5 sec. */ +#define SK_RLMT_SEG_TO_VAL 900000000 /* 15 min. */ + +/* Assume tick counter increment is 1 - may be set OS-dependent. */ +#ifndef SK_TICK_INCR +#define SK_TICK_INCR SK_CONSTU64(1) +#endif /* !defined(SK_TICK_INCR) */ + +/* + * Amount that a time stamp must be later to be recognized as "substantially + * later". This is about 1/128 sec, but above 1 tick counter increment. + */ +#define SK_RLMT_BC_DELTA (1 + ((SK_TICKS_PER_SEC >> 7) > SK_TICK_INCR ? \ + (SK_TICKS_PER_SEC >> 7) : SK_TICK_INCR)) + +/* ----- Private RLMT defaults ----- */ + +#define SK_RLMT_DEF_PREF_PORT 0 /* "Lower" port. */ +#define SK_RLMT_DEF_MODE SK_RLMT_CHECK_LINK /* Default RLMT Mode. */ + +/* ----- Private RLMT checking states ----- */ + +#define SK_RLMT_RCS_SEG 1 /* RLMT Check State: check seg. */ +#define SK_RLMT_RCS_START_SEG 2 /* RLMT Check State: start check seg. */ +#define SK_RLMT_RCS_SEND_SEG 4 /* RLMT Check State: send BPDU packet */ +#define SK_RLMT_RCS_REPORT_SEG 8 /* RLMT Check State: report seg. */ + +/* ----- Private PORT checking states ----- */ + +#define SK_RLMT_PCS_TX 1 /* Port Check State: check tx. */ +#define SK_RLMT_PCS_RX 2 /* Port Check State: check rx. */ + +/* ----- Private PORT events ----- */ + +/* Note: Update simulation when changing these. */ +#define SK_RLMT_PORTSTART_TIM 1100 /* Port start timeout. */ +#define SK_RLMT_PORTUP_TIM 1101 /* Port can now go up. */ +#define SK_RLMT_PORTDOWN_RX_TIM 1102 /* Port did not receive once ... */ +#define SK_RLMT_PORTDOWN 1103 /* Port went down. */ +#define SK_RLMT_PORTDOWN_TX_TIM 1104 /* Partner did not receive ... */ + +/* ----- Private RLMT events ----- */ + +/* Note: Update simulation when changing these. */ +#define SK_RLMT_TIM 2100 /* RLMT timeout. */ +#define SK_RLMT_SEG_TIM 2101 /* RLMT segmentation check timeout. */ + +#define TO_SHORTEN(tim) ((tim) / 2) + +/* Error numbers and messages. */ +#define SKERR_RLMT_E001 (SK_ERRBASE_RLMT + 0) +#define SKERR_RLMT_E001_MSG "No Packet." +#define SKERR_RLMT_E002 (SKERR_RLMT_E001 + 1) +#define SKERR_RLMT_E002_MSG "Short Packet." +#define SKERR_RLMT_E003 (SKERR_RLMT_E002 + 1) +#define SKERR_RLMT_E003_MSG "Unknown RLMT event." +#define SKERR_RLMT_E004 (SKERR_RLMT_E003 + 1) +#define SKERR_RLMT_E004_MSG "PortsUp incorrect." +#define SKERR_RLMT_E005 (SKERR_RLMT_E004 + 1) +#define SKERR_RLMT_E005_MSG \ + "Net seems to be segmented (different root bridges are reported on the ports)." +#define SKERR_RLMT_E006 (SKERR_RLMT_E005 + 1) +#define SKERR_RLMT_E006_MSG "Duplicate MAC Address detected." +#define SKERR_RLMT_E007 (SKERR_RLMT_E006 + 1) +#define SKERR_RLMT_E007_MSG "LinksUp incorrect." +#define SKERR_RLMT_E008 (SKERR_RLMT_E007 + 1) +#define SKERR_RLMT_E008_MSG "Port not started but link came up." +#define SKERR_RLMT_E009 (SKERR_RLMT_E008 + 1) +#define SKERR_RLMT_E009_MSG "Corrected illegal setting of Preferred Port." +#define SKERR_RLMT_E010 (SKERR_RLMT_E009 + 1) +#define SKERR_RLMT_E010_MSG "Ignored illegal Preferred Port." + +/* LLC field values. */ +#define LLC_COMMAND_RESPONSE_BIT 1 +#define LLC_TEST_COMMAND 0xE3 +#define LLC_UI 0x03 + +/* RLMT Packet fields. */ +#define SK_RLMT_DSAP 0 +#define SK_RLMT_SSAP 0 +#define SK_RLMT_CTRL (LLC_TEST_COMMAND) +#define SK_RLMT_INDICATOR0 0x53 /* S */ +#define SK_RLMT_INDICATOR1 0x4B /* K */ +#define SK_RLMT_INDICATOR2 0x2D /* - */ +#define SK_RLMT_INDICATOR3 0x52 /* R */ +#define SK_RLMT_INDICATOR4 0x4C /* L */ +#define SK_RLMT_INDICATOR5 0x4D /* M */ +#define SK_RLMT_INDICATOR6 0x54 /* T */ +#define SK_RLMT_PACKET_VERSION 0 + +/* RLMT SPT Flag values. */ +#define SK_RLMT_SPT_FLAG_CHANGE 0x01 +#define SK_RLMT_SPT_FLAG_CHANGE_ACK 0x80 + +/* RLMT SPT Packet fields. */ +#define SK_RLMT_SPT_DSAP 0x42 +#define SK_RLMT_SPT_SSAP 0x42 +#define SK_RLMT_SPT_CTRL (LLC_UI) +#define SK_RLMT_SPT_PROTOCOL_ID0 0x00 +#define SK_RLMT_SPT_PROTOCOL_ID1 0x00 +#define SK_RLMT_SPT_PROTOCOL_VERSION_ID 0x00 +#define SK_RLMT_SPT_BPDU_TYPE 0x00 +#define SK_RLMT_SPT_FLAGS 0x00 /* ?? */ +#define SK_RLMT_SPT_ROOT_ID0 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_ROOT_ID1 0xFF /* Lowest possible priority. */ + +/* Remaining 6 bytes will be the current port address. */ +#define SK_RLMT_SPT_ROOT_PATH_COST0 0x00 +#define SK_RLMT_SPT_ROOT_PATH_COST1 0x00 +#define SK_RLMT_SPT_ROOT_PATH_COST2 0x00 +#define SK_RLMT_SPT_ROOT_PATH_COST3 0x00 +#define SK_RLMT_SPT_BRIDGE_ID0 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_BRIDGE_ID1 0xFF /* Lowest possible priority. */ + +/* Remaining 6 bytes will be the current port address. */ +#define SK_RLMT_SPT_PORT_ID0 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_PORT_ID1 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_MSG_AGE0 0x00 +#define SK_RLMT_SPT_MSG_AGE1 0x00 +#define SK_RLMT_SPT_MAX_AGE0 0x00 +#define SK_RLMT_SPT_MAX_AGE1 0xFF +#define SK_RLMT_SPT_HELLO_TIME0 0x00 +#define SK_RLMT_SPT_HELLO_TIME1 0xFF +#define SK_RLMT_SPT_FWD_DELAY0 0x00 +#define SK_RLMT_SPT_FWD_DELAY1 0x40 + +/* Size defines. */ +#define SK_RLMT_MIN_PACKET_SIZE 34 +#define SK_RLMT_MAX_PACKET_SIZE (SK_RLMT_MAX_TX_BUF_SIZE) +#define SK_PACKET_DATA_LEN (SK_RLMT_MAX_PACKET_SIZE - \ + SK_RLMT_MIN_PACKET_SIZE) + +/* ----- RLMT packet types ----- */ +#define SK_PACKET_ANNOUNCE 1 /* Port announcement. */ +#define SK_PACKET_ALIVE 2 /* Alive packet to port. */ +#define SK_PACKET_ADDR_CHANGED 3 /* Port address changed. */ +#define SK_PACKET_CHECK_TX 4 /* Check your tx line. */ + +#ifdef SK_LITTLE_ENDIAN +#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \ + SK_U8 *_Addr = (SK_U8*)(Addr); \ + SK_U16 _Val = (SK_U16)(Val); \ + *_Addr++ = (SK_U8)(_Val >> 8); \ + *_Addr = (SK_U8)(_Val & 0xFF); \ +} +#endif /* SK_LITTLE_ENDIAN */ + +#ifdef SK_BIG_ENDIAN +#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val)) +#endif /* SK_BIG_ENDIAN */ + +#define AUTONEG_FAILED SK_FALSE +#define AUTONEG_SUCCESS SK_TRUE + + +/* typedefs *******************************************************************/ + +/* RLMT packet. Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */ +typedef struct s_RlmtPacket { + SK_U8 DstAddr[SK_MAC_ADDR_LEN]; + SK_U8 SrcAddr[SK_MAC_ADDR_LEN]; + SK_U8 TypeLen[2]; + SK_U8 DSap; + SK_U8 SSap; + SK_U8 Ctrl; + SK_U8 Indicator[7]; + SK_U8 RlmtPacketType[2]; + SK_U8 Align1[2]; + SK_U8 Random[4]; /* Random value of requesting(!) station. */ + SK_U8 RlmtPacketVersion[2]; /* RLMT Packet version. */ + SK_U8 Data[SK_PACKET_DATA_LEN]; +} SK_RLMT_PACKET; + +typedef struct s_SpTreeRlmtPacket { + SK_U8 DstAddr[SK_MAC_ADDR_LEN]; + SK_U8 SrcAddr[SK_MAC_ADDR_LEN]; + SK_U8 TypeLen[2]; + SK_U8 DSap; + SK_U8 SSap; + SK_U8 Ctrl; + SK_U8 ProtocolId[2]; + SK_U8 ProtocolVersionId; + SK_U8 BpduType; + SK_U8 Flags; + SK_U8 RootId[8]; + SK_U8 RootPathCost[4]; + SK_U8 BridgeId[8]; + SK_U8 PortId[2]; + SK_U8 MessageAge[2]; + SK_U8 MaxAge[2]; + SK_U8 HelloTime[2]; + SK_U8 ForwardDelay[2]; +} SK_SPTREE_PACKET; + +/* global variables ***********************************************************/ + +SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}}; +SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}}; + +/* local variables ************************************************************/ + +/* None. */ + +/* functions ******************************************************************/ + +RLMT_STATIC void SkRlmtCheckSwitch( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 NetIdx); +RLMT_STATIC void SkRlmtCheckSeg( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 NetIdx); +RLMT_STATIC void SkRlmtEvtSetNets( + SK_AC *pAC, + SK_IOC IoC, + SK_EVPARA Para); + +/****************************************************************************** + * + * SkRlmtInit - initialize data, set state to init + * + * Description: + * + * SK_INIT_DATA + * ============ + * + * This routine initializes all RLMT-related variables to a known state. + * The initial state is SK_RLMT_RS_INIT. + * All ports are initialized to SK_RLMT_PS_INIT. + * + * + * SK_INIT_IO + * ========== + * + * Nothing. + * + * + * SK_INIT_RUN + * =========== + * + * Determine the adapter's random value. + * Set the hw registers, the "logical MAC address", the + * RLMT multicast address, and eventually the BPDU multicast address. + * + * Context: + * init, pageable + * + * Returns: + * Nothing. + */ +void SkRlmtInit( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Level) /* Initialization Level */ +{ + SK_U32 i, j; + SK_U64 Random; + SK_EVPARA Para; + SK_MAC_ADDR VirtualMacAddress; + SK_MAC_ADDR PhysicalAMacAddress; + SK_BOOL VirtualMacAddressSet; + SK_BOOL PhysicalAMacAddressSet; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT, + ("RLMT Init level %d.\n", Level)) + + switch (Level) { + case SK_INIT_DATA: /* Initialize data structures. */ + SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT)); + + for (i = 0; i < SK_MAX_MACS; i++) { + pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT; + pAC->Rlmt.Port[i].LinkDown = SK_TRUE; + pAC->Rlmt.Port[i].PortDown = SK_TRUE; + pAC->Rlmt.Port[i].PortStarted = SK_FALSE; + pAC->Rlmt.Port[i].PortNoRx = SK_FALSE; + pAC->Rlmt.Port[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Port[i].PortNumber = i; + pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0]; + pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i]; + } + + pAC->Rlmt.NumNets = 1; + for (i = 0; i < SK_MAX_NETS; i++) { + pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; + pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* Automatic. */ + /* Just assuming. */ + pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; + pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; + pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; + pAC->Rlmt.Net[i].NetNumber = i; + } + + pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0]; + pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1]; +#if SK_MAX_NETS > 1 + pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1]; +#endif /* SK_MAX_NETS > 1 */ + break; + + case SK_INIT_IO: /* GIMacsFound first available here. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT, + ("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound)) + + pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound; + + /* Initialize HW registers? */ + if (pAC->GIni.GIMacsFound == 1) { + Para.Para32[0] = SK_RLMT_MODE_CLS; + Para.Para32[1] = 0; + (void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para); + } + break; + + case SK_INIT_RUN: + /* Ensure RLMT is set to one net. */ + if (pAC->Rlmt.NumNets > 1) { + Para.Para32[0] = 1; + Para.Para32[1] = -1; + SkRlmtEvtSetNets(pAC, IoC, Para); + } + + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + Random = SkOsGetTime(pAC); + *(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random; + + for (j = 0; j < 4; j++) { + pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort-> + CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j]; + } + + (void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY); + + /* Add RLMT MC address. */ + (void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT); + + if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) { + /* Add BPDU MC address. */ + (void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT); + } + + (void)SkAddrMcUpdate(pAC, IoC, i); + } + + VirtualMacAddressSet = SK_FALSE; + /* Read virtual MAC address from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + + SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]); + VirtualMacAddressSet |= VirtualMacAddress.a[j]; + } + + PhysicalAMacAddressSet = SK_FALSE; + /* Read physical MAC address for MAC A from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + + SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]); + PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j]; + } + + /* check if the two mac addresses contain reasonable values */ + if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) { + + pAC->Rlmt.RlmtOff = SK_TRUE; + } + + /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD + and the RLMT_LOOKAHEAD macros */ + else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) { + + pAC->Rlmt.RlmtOff = SK_TRUE; + } + else { + pAC->Rlmt.RlmtOff = SK_FALSE; + } + break; + + default: /* error */ + break; + } + return; +} /* SkRlmtInit */ + + +/****************************************************************************** + * + * SkRlmtBuildCheckChain - build the check chain + * + * Description: + * This routine builds the local check chain: + * - Each port that is up checks the next port. + * - The last port that is up checks the first port that is up. + * + * Notes: + * - Currently only local ports are considered when building the chain. + * - Currently the SuspectState is just reset; + * it would be better to save it ... + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtBuildCheckChain( +SK_AC *pAC, /* Adapter Context */ +SK_U32 NetIdx) /* Net Number */ +{ + SK_U32 i; + SK_U32 NumMacsUp; + SK_RLMT_PORT * FirstMacUp; + SK_RLMT_PORT * PrevMacUp; + + FirstMacUp = NULL; + PrevMacUp = NULL; + + if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { + for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) { + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; + } + return; /* Done. */ + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtBuildCheckChain.\n")) + + NumMacsUp = 0; + + for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; + pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0; + pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &= + ~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX); + + /* + * If more than two links are detected we should consider + * checking at least two other ports: + * 1. the next port that is not LinkDown and + * 2. the next port that is not PortDown. + */ + if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) { + if (NumMacsUp == 0) { + FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i]; + } + else { + PrevMacUp->PortCheck[ + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr = + pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress; + PrevMacUp->PortCheck[ + PrevMacUp->PortsChecked].SuspectTx = SK_FALSE; + PrevMacUp->PortsChecked++; + } + PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i]; + NumMacsUp++; + } + } + + if (NumMacsUp > 1) { + PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr = + FirstMacUp->AddrPort->CurrentMacAddress; + PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx = + SK_FALSE; + PrevMacUp->PortsChecked++; + } + +#ifdef DEBUG + for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Port %d checks %d other ports: %2X.\n", i, + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked, + pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5])) + } +#endif /* DEBUG */ + + return; +} /* SkRlmtBuildCheckChain */ + + +/****************************************************************************** + * + * SkRlmtBuildPacket - build an RLMT packet + * + * Description: + * This routine sets up an RLMT packet. + * + * Context: + * runtime, pageable? + * + * Returns: + * NULL or pointer to RLMT mbuf + */ +RLMT_STATIC SK_MBUF *SkRlmtBuildPacket( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber, /* Sending port */ +SK_U16 PacketType, /* RLMT packet type */ +SK_MAC_ADDR *SrcAddr, /* Source address */ +SK_MAC_ADDR *DestAddr) /* Destination address */ +{ + int i; + SK_U16 Length; + SK_MBUF *pMb; + SK_RLMT_PACKET *pPacket; + +#ifdef DEBUG + SK_U8 CheckSrc = 0; + SK_U8 CheckDest = 0; + + for (i = 0; i < SK_MAC_ADDR_LEN; ++i) { + CheckSrc |= SrcAddr->a[i]; + CheckDest |= DestAddr->a[i]; + } + + if ((CheckSrc == 0) || (CheckDest == 0)) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR, + ("SkRlmtBuildPacket: Invalid %s%saddr.\n", + (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : ""))) + } +#endif + + if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) { + pPacket = (SK_RLMT_PACKET*)pMb->pData; + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pPacket->DstAddr[i] = DestAddr->a[i]; + pPacket->SrcAddr[i] = SrcAddr->a[i]; + } + pPacket->DSap = SK_RLMT_DSAP; + pPacket->SSap = SK_RLMT_SSAP; + pPacket->Ctrl = SK_RLMT_CTRL; + pPacket->Indicator[0] = SK_RLMT_INDICATOR0; + pPacket->Indicator[1] = SK_RLMT_INDICATOR1; + pPacket->Indicator[2] = SK_RLMT_INDICATOR2; + pPacket->Indicator[3] = SK_RLMT_INDICATOR3; + pPacket->Indicator[4] = SK_RLMT_INDICATOR4; + pPacket->Indicator[5] = SK_RLMT_INDICATOR5; + pPacket->Indicator[6] = SK_RLMT_INDICATOR6; + + SK_U16_TO_NETWORK_ORDER(PacketType, &pPacket->RlmtPacketType[0]); + + for (i = 0; i < 4; i++) { + pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i]; + } + + SK_U16_TO_NETWORK_ORDER( + SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]); + + for (i = 0; i < SK_PACKET_DATA_LEN; i++) { + pPacket->Data[i] = 0x00; + } + + Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */ + pMb->Length = Length; + pMb->PortIdx = PortNumber; + Length -= 14; + SK_U16_TO_NETWORK_ORDER(Length, &pPacket->TypeLen[0]); + + if (PacketType == SK_PACKET_ALIVE) { + pAC->Rlmt.Port[PortNumber].TxHelloCts++; + } + } + + return (pMb); +} /* SkRlmtBuildPacket */ + + +/****************************************************************************** + * + * SkRlmtBuildSpanningTreePacket - build spanning tree check packet + * + * Description: + * This routine sets up a BPDU packet for spanning tree check. + * + * Context: + * runtime, pageable? + * + * Returns: + * NULL or pointer to RLMT mbuf + */ +RLMT_STATIC SK_MBUF *SkRlmtBuildSpanningTreePacket( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Sending port */ +{ + unsigned i; + SK_U16 Length; + SK_MBUF *pMb; + SK_SPTREE_PACKET *pSPacket; + + if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != + NULL) { + pSPacket = (SK_SPTREE_PACKET*)pMb->pData; + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pSPacket->DstAddr[i] = BridgeMcAddr.a[i]; + pSPacket->SrcAddr[i] = + pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i]; + } + pSPacket->DSap = SK_RLMT_SPT_DSAP; + pSPacket->SSap = SK_RLMT_SPT_SSAP; + pSPacket->Ctrl = SK_RLMT_SPT_CTRL; + + pSPacket->ProtocolId[0] = SK_RLMT_SPT_PROTOCOL_ID0; + pSPacket->ProtocolId[1] = SK_RLMT_SPT_PROTOCOL_ID1; + pSPacket->ProtocolVersionId = SK_RLMT_SPT_PROTOCOL_VERSION_ID; + pSPacket->BpduType = SK_RLMT_SPT_BPDU_TYPE; + pSPacket->Flags = SK_RLMT_SPT_FLAGS; + pSPacket->RootId[0] = SK_RLMT_SPT_ROOT_ID0; + pSPacket->RootId[1] = SK_RLMT_SPT_ROOT_ID1; + pSPacket->RootPathCost[0] = SK_RLMT_SPT_ROOT_PATH_COST0; + pSPacket->RootPathCost[1] = SK_RLMT_SPT_ROOT_PATH_COST1; + pSPacket->RootPathCost[2] = SK_RLMT_SPT_ROOT_PATH_COST2; + pSPacket->RootPathCost[3] = SK_RLMT_SPT_ROOT_PATH_COST3; + pSPacket->BridgeId[0] = SK_RLMT_SPT_BRIDGE_ID0; + pSPacket->BridgeId[1] = SK_RLMT_SPT_BRIDGE_ID1; + + /* + * Use logical MAC address as bridge ID and filter these packets + * on receive. + */ + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pSPacket->BridgeId[i + 2] = pSPacket->RootId[i + 2] = + pAC->Addr.Net[pAC->Rlmt.Port[PortNumber].Net->NetNumber]. + CurrentMacAddress.a[i]; + } + pSPacket->PortId[0] = SK_RLMT_SPT_PORT_ID0; + pSPacket->PortId[1] = SK_RLMT_SPT_PORT_ID1; + pSPacket->MessageAge[0] = SK_RLMT_SPT_MSG_AGE0; + pSPacket->MessageAge[1] = SK_RLMT_SPT_MSG_AGE1; + pSPacket->MaxAge[0] = SK_RLMT_SPT_MAX_AGE0; + pSPacket->MaxAge[1] = SK_RLMT_SPT_MAX_AGE1; + pSPacket->HelloTime[0] = SK_RLMT_SPT_HELLO_TIME0; + pSPacket->HelloTime[1] = SK_RLMT_SPT_HELLO_TIME1; + pSPacket->ForwardDelay[0] = SK_RLMT_SPT_FWD_DELAY0; + pSPacket->ForwardDelay[1] = SK_RLMT_SPT_FWD_DELAY1; + + Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */ + pMb->Length = Length; + pMb->PortIdx = PortNumber; + Length -= 14; + SK_U16_TO_NETWORK_ORDER(Length, &pSPacket->TypeLen[0]); + + pAC->Rlmt.Port[PortNumber].TxSpHelloReqCts++; + } + + return (pMb); +} /* SkRlmtBuildSpanningTreePacket */ + + +/****************************************************************************** + * + * SkRlmtSend - build and send check packets + * + * Description: + * Depending on the RLMT state and the checking state, several packets + * are sent through the indicated port. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtSend( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Sending port */ +{ + unsigned j; + SK_EVPARA Para; + SK_RLMT_PORT *pRPort; + + pRPort = &pAC->Rlmt.Port[PortNumber]; + if (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) { + if (pRPort->CheckingState & (SK_RLMT_PCS_TX | SK_RLMT_PCS_RX)) { + /* Port is suspicious. Send the RLMT packet to the RLMT mc addr. */ + if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, + SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &SkRlmtMcAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + else { + /* + * Send a directed RLMT packet to all ports that are + * checked by the indicated port. + */ + for (j = 0; j < pRPort->PortsChecked; j++) { + if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, + SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &pRPort->PortCheck[j].CheckAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + } + } + + if ((pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) && + (pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEND_SEG)) { + /* + * Send a BPDU packet to make a connected switch tell us + * the correct root bridge. + */ + if ((Para.pParaPtr = + SkRlmtBuildSpanningTreePacket(pAC, IoC, PortNumber)) != NULL) { + pAC->Rlmt.Port[PortNumber].Net->CheckingState &= ~SK_RLMT_RCS_SEND_SEG; + pRPort->RootIdSet = SK_FALSE; + + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_TX, + ("SkRlmtSend: BPDU Packet on Port %u.\n", PortNumber)) + } + } + return; +} /* SkRlmtSend */ + + +/****************************************************************************** + * + * SkRlmtPortReceives - check if port is (going) down and bring it up + * + * Description: + * This routine checks if a port who received a non-BPDU packet + * needs to go up or needs to be stopped going down. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtPortReceives( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Port to check */ +{ + SK_RLMT_PORT *pRPort; + SK_EVPARA Para; + + pRPort = &pAC->Rlmt.Port[PortNumber]; + pRPort->PortNoRx = SK_FALSE; + + if ((pRPort->PortState == SK_RLMT_PS_DOWN) && + !(pRPort->CheckingState & SK_RLMT_PCS_TX)) { + /* + * Port is marked down (rx), but received a non-BPDU packet. + * Bring it up. + */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Received on PortDown.\n")) + + pRPort->PortState = SK_RLMT_PS_GOING_UP; + pRPort->GuTimeStamp = SkOsGetTime(pAC); + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, + SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para); + pRPort->CheckingState &= ~SK_RLMT_PCS_RX; + /* pAC->Rlmt.CheckSwitch = SK_TRUE; */ + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } /* PortDown && !SuspectTx */ + else if (pRPort->CheckingState & SK_RLMT_PCS_RX) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Stop bringing port down.\n")) + SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); + pRPort->CheckingState &= ~SK_RLMT_PCS_RX; + /* pAC->Rlmt.CheckSwitch = SK_TRUE; */ + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } /* PortGoingDown */ + + return; +} /* SkRlmtPortReceives */ + + +/****************************************************************************** + * + * SkRlmtPacketReceive - receive a packet for closer examination + * + * Description: + * This routine examines a packet more closely than SK_RLMT_LOOKAHEAD. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtPacketReceive( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_MBUF *pMb) /* Received packet */ +{ +#ifdef xDEBUG + extern void DumpData(char *p, int size); +#endif /* DEBUG */ + int i; + unsigned j; + SK_U16 PacketType; + SK_U32 PortNumber; + SK_ADDR_PORT *pAPort; + SK_RLMT_PORT *pRPort; + SK_RLMT_PACKET *pRPacket; + SK_SPTREE_PACKET *pSPacket; + SK_EVPARA Para; + + PortNumber = pMb->PortIdx; + pAPort = &pAC->Addr.Port[PortNumber]; + pRPort = &pAC->Rlmt.Port[PortNumber]; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: PortNumber == %d.\n", PortNumber)) + + pRPacket = (SK_RLMT_PACKET*)pMb->pData; + pSPacket = (SK_SPTREE_PACKET*)pRPacket; + +#ifdef xDEBUG + DumpData((char *)pRPacket, 32); +#endif /* DEBUG */ + + if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) { + SkRlmtPortReceives(pAC, IoC, PortNumber); + } + + /* Check destination address. */ + + if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) && + !SK_ADDR_EQUAL(SkRlmtMcAddr.a, pRPacket->DstAddr) && + !SK_ADDR_EQUAL(BridgeMcAddr.a, pRPacket->DstAddr)) { + + /* Not sent to current MAC or registered MC address => Trash it. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Not for me.\n")) + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + return; + } + else if (SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->SrcAddr)) { + + /* + * Was sent by same port (may happen during port switching + * or in case of duplicate MAC addresses). + */ + + /* + * Check for duplicate address here: + * If Packet.Random != My.Random => DupAddr. + */ + for (i = 3; i >= 0; i--) { + if (pRPort->Random[i] != pRPacket->Random[i]) { + break; + } + } + + /* + * CAUTION: Do not check for duplicate MAC address in RLMT Alive Reply + * packets (they have the LLC_COMMAND_RESPONSE_BIT set in + * pRPacket->SSap). + */ + if (i >= 0 && pRPacket->DSap == SK_RLMT_DSAP && + pRPacket->Ctrl == SK_RLMT_CTRL && + pRPacket->SSap == SK_RLMT_SSAP && + pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 && + pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 && + pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 && + pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 && + pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 && + pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 && + pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Duplicate MAC Address.\n")) + + /* Error Log entry. */ + SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E006, SKERR_RLMT_E006_MSG); + } + else { + /* Simply trash it. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Sent by me.\n")) + } + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + return; + } + + /* Check SuspectTx entries. */ + if (pRPort->PortsSuspect > 0) { + for (j = 0; j < pRPort->PortsChecked; j++) { + if (pRPort->PortCheck[j].SuspectTx && + SK_ADDR_EQUAL( + pRPacket->SrcAddr, pRPort->PortCheck[j].CheckAddr.a)) { + pRPort->PortCheck[j].SuspectTx = SK_FALSE; + pRPort->PortsSuspect--; + break; + } + } + } + + /* Determine type of packet. */ + if (pRPacket->DSap == SK_RLMT_DSAP && + pRPacket->Ctrl == SK_RLMT_CTRL && + (pRPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SSAP && + pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 && + pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 && + pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 && + pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 && + pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 && + pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 && + pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) { + + /* It's an RLMT packet. */ + PacketType = (SK_U16)((pRPacket->RlmtPacketType[0] << 8) | + pRPacket->RlmtPacketType[1]); + + switch (PacketType) { + case SK_PACKET_ANNOUNCE: /* Not yet used. */ +#if 0 + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC); +#endif /* 0 */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Announce.\n")) + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + break; + + case SK_PACKET_ALIVE: + if (pRPacket->SSap & LLC_COMMAND_RESPONSE_BIT) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Alive Reply.\n")) + + if (!(pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_LLC) || + SK_ADDR_EQUAL( + pRPacket->DstAddr, pAPort->CurrentMacAddress.a)) { + /* Obviously we could send something. */ + if (pRPort->CheckingState & SK_RLMT_PCS_TX) { + pRPort->CheckingState &= ~SK_RLMT_PCS_TX; + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + } + + if ((pRPort->PortState == SK_RLMT_PS_DOWN) && + !(pRPort->CheckingState & SK_RLMT_PCS_RX)) { + pRPort->PortState = SK_RLMT_PS_GOING_UP; + pRPort->GuTimeStamp = SkOsGetTime(pAC); + + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->UpTimer, + SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT, + SK_RLMT_PORTUP_TIM, Para); + } + } + + /* Mark sending port as alive? */ + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + else { /* Alive Request Packet. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Alive Request.\n")) + + pRPort->RxHelloCts++; + + /* Answer. */ + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pRPacket->DstAddr[i] = pRPacket->SrcAddr[i]; + pRPacket->SrcAddr[i] = + pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i]; + } + pRPacket->SSap |= LLC_COMMAND_RESPONSE_BIT; + + Para.pParaPtr = pMb; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + break; + + case SK_PACKET_CHECK_TX: + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Check your tx line.\n")) + + /* A port checking us requests us to check our tx line. */ + pRPort->CheckingState |= SK_RLMT_PCS_TX; + + /* Start PortDownTx timer. */ + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->DownTxTimer, + SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT, + SK_RLMT_PORTDOWN_TX_TIM, Para); + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + + if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, + SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &SkRlmtMcAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + break; + + case SK_PACKET_ADDR_CHANGED: + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Address Change.\n")) + + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Unknown RLMT packet.\n")) + + /* RA;:;: ??? */ + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + } + else if (pSPacket->DSap == SK_RLMT_SPT_DSAP && + pSPacket->Ctrl == SK_RLMT_SPT_CTRL && + (pSPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SPT_SSAP) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: BPDU Packet.\n")) + + /* Spanning Tree packet. */ + pRPort->RxSpHelloCts++; + + if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pAC->Addr.Net[pAC->Rlmt. + Port[PortNumber].Net->NetNumber].CurrentMacAddress.a[0])) { + /* + * Check segmentation if a new root bridge is set and + * the segmentation check is not currently running. + */ + if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pRPort->Root.Id[2]) && + (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) && + (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) + != 0 && (pAC->Rlmt.Port[PortNumber].Net->CheckingState & + SK_RLMT_RCS_SEG) == 0) { + pAC->Rlmt.Port[PortNumber].Net->CheckingState |= + SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG; + } + + /* Store tree view of this port. */ + for (i = 0; i < 8; i++) { + pRPort->Root.Id[i] = pSPacket->RootId[i]; + } + pRPort->RootIdSet = SK_TRUE; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP, + ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", + PortNumber, + pRPort->Root.Id[0], pRPort->Root.Id[1], + pRPort->Root.Id[2], pRPort->Root.Id[3], + pRPort->Root.Id[4], pRPort->Root.Id[5], + pRPort->Root.Id[6], pRPort->Root.Id[7])) + } + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + if ((pAC->Rlmt.Port[PortNumber].Net->CheckingState & + SK_RLMT_RCS_REPORT_SEG) != 0) { + SkRlmtCheckSeg(pAC, IoC, pAC->Rlmt.Port[PortNumber].Net->NetNumber); + } + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Unknown Packet Type.\n")) + + /* Unknown packet. */ + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + return; +} /* SkRlmtPacketReceive */ + + +/****************************************************************************** + * + * SkRlmtCheckPort - check if a port works + * + * Description: + * This routine checks if a port whose link is up received something + * and if it seems to transmit successfully. + * + * # PortState: PsInit, PsLinkDown, PsDown, PsGoingUp, PsUp + * # PortCheckingState (Bitfield): ChkTx, ChkRx, ChkSeg + * # RlmtCheckingState (Bitfield): ChkSeg, StartChkSeg, ReportSeg + * + * if (Rx - RxBpdu == 0) { # No rx. + * if (state == PsUp) { + * PortCheckingState |= ChkRx + * } + * if (ModeCheckSeg && (Timeout == + * TO_SHORTEN(RLMT_DEFAULT_TIMEOUT))) { + * RlmtCheckingState |= ChkSeg) + * PortCheckingState |= ChkSeg + * } + * NewTimeout = TO_SHORTEN(Timeout) + * if (NewTimeout < RLMT_MIN_TIMEOUT) { + * NewTimeout = RLMT_MIN_TIMEOUT + * PortState = PsDown + * ... + * } + * } + * else { # something was received + * # Set counter to 0 at LinkDown? + * # No - rx may be reported after LinkDown ??? + * PortCheckingState &= ~ChkRx + * NewTimeout = RLMT_DEFAULT_TIMEOUT + * if (RxAck == 0) { + * possible reasons: + * is my tx line bad? -- + * send RLMT multicast and report + * back internally? (only possible + * between ports on same adapter) + * } + * if (RxChk == 0) { + * possible reasons: + * - tx line of port set to check me + * maybe bad + * - no other port/adapter available or set + * to check me + * - adapter checking me has a longer + * timeout + * ??? anything that can be done here? + * } + * } + * + * Context: + * runtime, pageable? + * + * Returns: + * New timeout value. + */ +RLMT_STATIC SK_U32 SkRlmtCheckPort( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Port to check */ +{ + unsigned i; + SK_U32 NewTimeout; + SK_RLMT_PORT *pRPort; + SK_EVPARA Para; + + pRPort = &pAC->Rlmt.Port[PortNumber]; + + if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtCheckPort %d: No (%d) receives in last time slot.\n", + PortNumber, pRPort->PacketsPerTimeSlot)) + + /* + * Check segmentation if there was no receive at least twice + * in a row (PortNoRx is already set) and the segmentation + * check is not currently running. + */ + + if (pRPort->PortNoRx && (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) && + (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) && + !(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEG)) { + pAC->Rlmt.Port[PortNumber].Net->CheckingState |= + SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtCheckPort: PortsSuspect %d, PcsRx %d.\n", + pRPort->PortsSuspect, pRPort->CheckingState & SK_RLMT_PCS_RX)) + + if (pRPort->PortState != SK_RLMT_PS_DOWN) { + NewTimeout = TO_SHORTEN(pAC->Rlmt.Port[PortNumber].Net->TimeoutValue); + if (NewTimeout < SK_RLMT_MIN_TO_VAL) { + NewTimeout = SK_RLMT_MIN_TO_VAL; + } + + if (!(pRPort->CheckingState & SK_RLMT_PCS_RX)) { + Para.Para32[0] = PortNumber; + pRPort->CheckingState |= SK_RLMT_PCS_RX; + + /* + * What shall we do if the port checked by this one receives + * our request frames? What's bad - our rx line or his tx line? + */ + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->DownRxTimer, + SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT, + SK_RLMT_PORTDOWN_RX_TIM, Para); + + for (i = 0; i < pRPort->PortsChecked; i++) { + if (pRPort->PortCheck[i].SuspectTx) { + continue; + } + pRPort->PortCheck[i].SuspectTx = SK_TRUE; + pRPort->PortsSuspect++; + if ((Para.pParaPtr = + SkRlmtBuildPacket(pAC, IoC, PortNumber, SK_PACKET_CHECK_TX, + &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &pRPort->PortCheck[i].CheckAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + } + } + else { /* PortDown -- or all partners suspect. */ + NewTimeout = SK_RLMT_DEF_TO_VAL; + } + pRPort->PortNoRx = SK_TRUE; + } + else { /* A non-BPDU packet was received. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtCheckPort %d: %d (%d) receives in last time slot.\n", + PortNumber, + pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot, + pRPort->PacketsPerTimeSlot)) + + SkRlmtPortReceives(pAC, IoC, PortNumber); + if (pAC->Rlmt.CheckSwitch) { + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } + + NewTimeout = SK_RLMT_DEF_TO_VAL; + } + + return (NewTimeout); +} /* SkRlmtCheckPort */ + + +/****************************************************************************** + * + * SkRlmtSelectBcRx - select new active port, criteria 1 (CLP) + * + * Description: + * This routine selects the port that received a broadcast frame + * substantially later than all other ports. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectBcRx( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect) /* New active port */ +{ + SK_U64 BcTimeStamp; + SK_U32 i; + SK_BOOL PortFound; + + BcTimeStamp = 0; /* Not totally necessary, but feeling better. */ + PortFound = SK_FALSE; + + /* Select port with the latest TimeStamp. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n", + i, + pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx, + *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32), + *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32))) + + if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx) { + if (!PortFound || pAC->Rlmt.Port[i].BcTimeStamp > BcTimeStamp) { + BcTimeStamp = pAC->Rlmt.Port[i].BcTimeStamp; + *pSelect = i; + PortFound = SK_TRUE; + } + } + } + + if (PortFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Port %d received the last broadcast.\n", *pSelect)) + + /* Look if another port's time stamp is similar. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (i == *pSelect) { + continue; + } + if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx && + (pAC->Rlmt.Port[i].BcTimeStamp > + BcTimeStamp - SK_RLMT_BC_DELTA || + pAC->Rlmt.Port[i].BcTimeStamp + + SK_RLMT_BC_DELTA > BcTimeStamp)) { + PortFound = SK_FALSE; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Port %d received a broadcast at a similar time.\n", i)) + break; + } + } + } + +#ifdef DEBUG + if (PortFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_BCRX found Port %d receiving the substantially " + "latest broadcast (%u).\n", + *pSelect, + BcTimeStamp - pAC->Rlmt.Port[1 - *pSelect].BcTimeStamp)) + } +#endif /* DEBUG */ + + return (PortFound); +} /* SkRlmtSelectBcRx */ + + +/****************************************************************************** + * + * SkRlmtSelectNotSuspect - select new active port, criteria 2 (CLP) + * + * Description: + * This routine selects a good port (it is PortUp && !SuspectRx). + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectNotSuspect( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect) /* New active port */ +{ + SK_U32 i; + SK_BOOL PortFound; + + PortFound = SK_FALSE; + + /* Select first port that is PortUp && !SuspectRx. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (!pAC->Rlmt.Port[i].PortDown && + !(pAC->Rlmt.Port[i].CheckingState & SK_RLMT_PCS_RX)) { + *pSelect = i; + if (!pAC->Rlmt.Port[Active].PortDown && + !(pAC->Rlmt.Port[Active].CheckingState & SK_RLMT_PCS_RX)) { + *pSelect = Active; + } + if (!pAC->Rlmt.Port[PrefPort].PortDown && + !(pAC->Rlmt.Port[PrefPort].CheckingState & SK_RLMT_PCS_RX)) { + *pSelect = PrefPort; + } + PortFound = SK_TRUE; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_NOTSUSPECT found Port %d up and not check RX.\n", + *pSelect)) + break; + } + } + return (PortFound); +} /* SkRlmtSelectNotSuspect */ + + +/****************************************************************************** + * + * SkRlmtSelectUp - select new active port, criteria 3, 4 (CLP) + * + * Description: + * This routine selects a port that is up. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect, /* New active port */ +SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ +{ + SK_U32 i; + SK_BOOL PortFound; + + PortFound = SK_FALSE; + + /* Select first port that is PortUp. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_UP && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + *pSelect = i; + if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_UP && + pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) { + *pSelect = Active; + } + if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_UP && + pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) { + *pSelect = PrefPort; + } + PortFound = SK_TRUE; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_UP found Port %d up.\n", *pSelect)) + break; + } + } + return (PortFound); +} /* SkRlmtSelectUp */ + + +/****************************************************************************** + * + * SkRlmtSelectGoingUp - select new active port, criteria 5, 6 (CLP) + * + * Description: + * This routine selects the port that is going up for the longest time. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectGoingUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect, /* New active port */ +SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ +{ + SK_U64 GuTimeStamp; + SK_U32 i; + SK_BOOL PortFound; + + GuTimeStamp = 0; + PortFound = SK_FALSE; + + /* Select port that is PortGoingUp for the longest time. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp; + *pSelect = i; + PortFound = SK_TRUE; + break; + } + } + + if (!PortFound) { + return (SK_FALSE); + } + + for (i = *pSelect + 1; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP && + pAC->Rlmt.Port[i].GuTimeStamp < GuTimeStamp && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp; + *pSelect = i; + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_GOINGUP found Port %d going up.\n", *pSelect)) + return (SK_TRUE); +} /* SkRlmtSelectGoingUp */ + + +/****************************************************************************** + * + * SkRlmtSelectDown - select new active port, criteria 7, 8 (CLP) + * + * Description: + * This routine selects a port that is down. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectDown( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect, /* New active port */ +SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ +{ + SK_U32 i; + SK_BOOL PortFound; + + PortFound = SK_FALSE; + + /* Select first port that is PortDown. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_DOWN && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + *pSelect = i; + if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_DOWN && + pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) { + *pSelect = Active; + } + if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_DOWN && + pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) { + *pSelect = PrefPort; + } + PortFound = SK_TRUE; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_DOWN found Port %d down.\n", *pSelect)) + break; + } + } + return (PortFound); +} /* SkRlmtSelectDown */ + + +/****************************************************************************** + * + * SkRlmtCheckSwitch - select new active port and switch to it + * + * Description: + * This routine decides which port should be the active one and queues + * port switching if necessary. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtCheckSwitch( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 NetIdx) /* Net index */ +{ + SK_EVPARA Para; + SK_U32 Active; + SK_U32 PrefPort; + SK_U32 i; + SK_BOOL PortFound; + + Active = pAC->Rlmt.Net[NetIdx].ActivePort; /* Index of active port. */ + PrefPort = pAC->Rlmt.Net[NetIdx].PrefPort; /* Index of preferred port. */ + PortFound = SK_FALSE; + pAC->Rlmt.CheckSwitch = SK_FALSE; + +#if 0 /* RW 2001/10/18 - active port becomes always prefered one */ + if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */ + /* disable auto-fail back */ + PrefPort = Active; + } +#endif + + if (pAC->Rlmt.Net[NetIdx].LinksUp == 0) { + /* Last link went down - shut down the net. */ + pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_DOWN; + Para.Para32[0] = SK_RLMT_NET_DOWN_TEMP; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para); + + Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. + Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para); + return; + } /* pAC->Rlmt.LinksUp == 0 */ + else if (pAC->Rlmt.Net[NetIdx].LinksUp == 1 && + pAC->Rlmt.Net[NetIdx].RlmtState == SK_RLMT_RS_NET_DOWN) { + /* First link came up - get the net up. */ + pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_UP; + + /* + * If pAC->Rlmt.ActivePort != Para.Para32[0], + * the DRV switches to the port that came up. + */ + for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { + if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) { + if (!pAC->Rlmt.Net[NetIdx].Port[Active]->LinkDown) { + i = Active; + } + if (!pAC->Rlmt.Net[NetIdx].Port[PrefPort]->LinkDown) { + i = PrefPort; + } + PortFound = SK_TRUE; + break; + } + } + + if (PortFound) { + Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para); + + pAC->Rlmt.Net[NetIdx].ActivePort = i; + Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_UP, Para); + + if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 && + (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, + pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber, + SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx]. + CurrentMacAddress, &SkRlmtMcAddr)) != NULL) { + /* + * Send announce packet to RLMT multicast address to force + * switches to learn the new location of the logical MAC address. + */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E007, SKERR_RLMT_E007_MSG); + } + + return; + } /* LinksUp == 1 && RlmtState == SK_RLMT_RS_NET_DOWN */ + else { /* Cannot be reached in dual-net mode. */ + Para.Para32[0] = Active; + + /* + * Preselection: + * If RLMT Mode != CheckLinkState + * select port that received a broadcast frame substantially later + * than all other ports + * else select first port that is not SuspectRx + * else select first port that is PortUp + * else select port that is PortGoingUp for the longest time + * else select first port that is PortDown + * else stop. + * + * For the preselected port: + * If ActivePort is equal in quality, select ActivePort. + * + * If PrefPort is equal in quality, select PrefPort. + * + * If ActivePort != SelectedPort, + * If old ActivePort is LinkDown, + * SwitchHard + * else + * SwitchSoft + */ + /* check of ChgBcPrio flag added */ + if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && + (!pAC->Rlmt.Net[0].ChgBcPrio)) { + + if (!PortFound) { + PortFound = SkRlmtSelectBcRx( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + + if (!PortFound) { + PortFound = SkRlmtSelectNotSuspect( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ + + /* with changed priority for last broadcast received */ + if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && + (pAC->Rlmt.Net[0].ChgBcPrio)) { + if (!PortFound) { + PortFound = SkRlmtSelectNotSuspect( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + + if (!PortFound) { + PortFound = SkRlmtSelectBcRx( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ + + if (!PortFound) { + PortFound = SkRlmtSelectUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); + } + + if (!PortFound) { + PortFound = SkRlmtSelectUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); + } + + if (!PortFound) { + PortFound = SkRlmtSelectGoingUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); + } + + if (!PortFound) { + PortFound = SkRlmtSelectGoingUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); + } + + if (pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) { + if (!PortFound) { + PortFound = SkRlmtSelectDown(pAC, IoC, + Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); + } + + if (!PortFound) { + PortFound = SkRlmtSelectDown(pAC, IoC, + Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); + } + } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ + + if (PortFound) { + + if (Para.Para32[1] != Active) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Active: %d, Para1: %d.\n", Active, Para.Para32[1])) + pAC->Rlmt.Net[NetIdx].ActivePort = Para.Para32[1]; + Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. + Port[Para.Para32[0]]->PortNumber; + Para.Para32[1] = pAC->Rlmt.Net[NetIdx]. + Port[Para.Para32[1]]->PortNumber; + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[1], SK_LED_ACTIVE); + if (pAC->Rlmt.Port[Active].LinkDown) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_HARD, Para); + } + else { + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY); + SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_SOFT, Para); + } + Para.Para32[1] = NetIdx; + Para.Para32[0] = + pAC->Rlmt.Net[NetIdx].Port[Para.Para32[0]]->PortNumber; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para); + Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. + Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para); + if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 && + (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], + SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].CurrentMacAddress, + &SkRlmtMcAddr)) != NULL) { + /* + * Send announce packet to RLMT multicast address to force + * switches to learn the new location of the logical + * MAC address. + */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } /* (Para.pParaPtr = SkRlmtBuildPacket(...)) != NULL */ + } /* Para.Para32[1] != Active */ + } /* PortFound */ + else { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E004, SKERR_RLMT_E004_MSG); + } + } /* LinksUp > 1 || LinksUp == 1 && RlmtState != SK_RLMT_RS_NET_DOWN */ + return; +} /* SkRlmtCheckSwitch */ + + +/****************************************************************************** + * + * SkRlmtCheckSeg - Report if segmentation is detected + * + * Description: + * This routine checks if the ports see different root bridges and reports + * segmentation in such a case. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtCheckSeg( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 NetIdx) /* Net number */ +{ + SK_EVPARA Para; + SK_RLMT_NET *pNet; + SK_U32 i, j; + SK_BOOL Equal; + + pNet = &pAC->Rlmt.Net[NetIdx]; + pNet->RootIdSet = SK_FALSE; + Equal = SK_TRUE; + + for (i = 0; i < pNet->NumPorts; i++) { + if (pNet->Port[i]->LinkDown || !pNet->Port[i]->RootIdSet) { + continue; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP, + ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", i, + pNet->Port[i]->Root.Id[0], pNet->Port[i]->Root.Id[1], + pNet->Port[i]->Root.Id[2], pNet->Port[i]->Root.Id[3], + pNet->Port[i]->Root.Id[4], pNet->Port[i]->Root.Id[5], + pNet->Port[i]->Root.Id[6], pNet->Port[i]->Root.Id[7])) + + if (!pNet->RootIdSet) { + pNet->Root = pNet->Port[i]->Root; + pNet->RootIdSet = SK_TRUE; + continue; + } + + for (j = 0; j < 8; j ++) { + Equal &= pNet->Port[i]->Root.Id[j] == pNet->Root.Id[j]; + if (!Equal) { + break; + } + } + + if (!Equal) { + SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG); + Para.Para32[0] = NetIdx; + Para.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SEGMENTATION, Para); + + pNet->CheckingState &= ~SK_RLMT_RCS_REPORT_SEG; + + /* 2000-03-06 RA: New. */ + Para.Para32[0] = NetIdx; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pNet->SegTimer, SK_RLMT_SEG_TO_VAL, + SKGE_RLMT, SK_RLMT_SEG_TIM, Para); + break; + } + } /* for (i = 0; i < pNet->NumPorts; i++) */ + + /* 2000-03-06 RA: Moved here. */ + /* Segmentation check not running anymore. */ + pNet->CheckingState &= ~SK_RLMT_RCS_SEG; + +} /* SkRlmtCheckSeg */ + + +/****************************************************************************** + * + * SkRlmtPortStart - initialize port variables and start port + * + * Description: + * This routine initializes a port's variables and issues a PORT_START + * to the HWAC module. This handles retries if the start fails or the + * link eventually goes down. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtPortStart( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Port number */ +{ + SK_EVPARA Para; + + pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_LINK_DOWN; + pAC->Rlmt.Port[PortNumber].PortStarted = SK_TRUE; + pAC->Rlmt.Port[PortNumber].LinkDown = SK_TRUE; + pAC->Rlmt.Port[PortNumber].PortDown = SK_TRUE; + pAC->Rlmt.Port[PortNumber].CheckingState = 0; + pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE; + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); +} /* SkRlmtPortStart */ + + +/****************************************************************************** + * + * SkRlmtEvtPortStartTim - PORT_START_TIM + * + * Description: + * This routine handles PORT_START_TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortStartTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_U32 i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTSTART_TIMEOUT Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTSTART_TIMEOUT Event EMPTY.\n")) + return; + } + + /* + * Used to start non-preferred ports if the preferred one + * does not come up. + * This timeout needs only be set when starting the first + * (preferred) port. + */ + if (pAC->Rlmt.Port[Para.Para32[0]].LinkDown) { + /* PORT_START failed. */ + for (i = 0; i < pAC->Rlmt.Port[Para.Para32[0]].Net->NumPorts; i++) { + if (!pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortStarted) { + SkRlmtPortStart(pAC, IoC, + pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortNumber); + } + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTSTART_TIMEOUT Event END.\n")) +} /* SkRlmtEvtPortStartTim */ + + +/****************************************************************************** + * + * SkRlmtEvtLinkUp - LINK_UP + * + * Description: + * This routine handles LLINK_UP events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtLinkUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ +{ + SK_U32 i; + SK_RLMT_PORT *pRPort; + SK_EVPARA Para2; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Port %d Event BEGIN.\n", Para.Para32[0])) + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + if (!pRPort->PortStarted) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E008, SKERR_RLMT_E008_MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Event EMPTY.\n")) + return; + } + + if (!pRPort->LinkDown) { + /* RA;:;: Any better solution? */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Event EMPTY.\n")) + return; + } + + SkTimerStop(pAC, IoC, &pRPort->UpTimer); + SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + + /* Do something if timer already fired? */ + + pRPort->LinkDown = SK_FALSE; + pRPort->PortState = SK_RLMT_PS_GOING_UP; + pRPort->GuTimeStamp = SkOsGetTime(pAC); + pRPort->BcTimeStamp = 0; + pRPort->Net->LinksUp++; + if (pRPort->Net->LinksUp == 1) { + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_ACTIVE); + } + else { + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY); + } + + for (i = 0; i < pRPort->Net->NumPorts; i++) { + if (!pRPort->Net->Port[i]->PortStarted) { + SkRlmtPortStart(pAC, IoC, pRPort->Net->Port[i]->PortNumber); + } + } + + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + + if (pRPort->Net->LinksUp >= 2) { + if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) { + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); + } + } + + /* If the first link comes up, start the periodical RLMT timeout. */ + if (pRPort->Net->NumPorts > 1 && pRPort->Net->LinksUp == 1 && + (pRPort->Net->RlmtMode & SK_RLMT_CHECK_OTHERS) != 0) { + Para2.Para32[0] = pRPort->Net->NetNumber; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->Net->LocTimer, + pRPort->Net->TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, Para2); + } + + Para2 = Para; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, + SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2); + + /* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */ + if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 && + (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 && + (Para2.pParaPtr = + SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], SK_PACKET_ANNOUNCE, + &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress, &SkRlmtMcAddr) + ) != NULL) { + /* Send "new" packet to RLMT multicast address. */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); + } + + if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_SEG) { + if ((Para2.pParaPtr = + SkRlmtBuildSpanningTreePacket(pAC, IoC, Para.Para32[0])) != NULL) { + pAC->Rlmt.Port[Para.Para32[0]].RootIdSet = SK_FALSE; + pRPort->Net->CheckingState |= + SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG; + + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); + + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->Net->SegTimer, + SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Event END.\n")) +} /* SkRlmtEvtLinkUp */ + + +/****************************************************************************** + * + * SkRlmtEvtPortUpTim - PORT_UP_TIM + * + * Description: + * This routine handles PORT_UP_TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortUpTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_RLMT_PORT *pRPort; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Event EMPTY.\n")) + return; + } + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + if (pRPort->LinkDown || (pRPort->PortState == SK_RLMT_PS_UP)) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Port %d Event EMPTY.\n", Para.Para32[0])) + return; + } + + pRPort->PortDown = SK_FALSE; + pRPort->PortState = SK_RLMT_PS_UP; + pRPort->Net->PortsUp++; + if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) { + if (pAC->Rlmt.NumNets <= 1) { + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_UP, Para); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Event END.\n")) +} /* SkRlmtEvtPortUpTim */ + + +/****************************************************************************** + * + * SkRlmtEvtPortDownTim - PORT_DOWN_* + * + * Description: + * This routine handles PORT_DOWN_* events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortDownX( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Event, /* Event code */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_RLMT_PORT *pRPort; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Port %d Event (%d) BEGIN.\n", + Para.Para32[0], Event)) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Event EMPTY.\n")) + return; + } + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + if (!pRPort->PortStarted || (Event == SK_RLMT_PORTDOWN_TX_TIM && + !(pRPort->CheckingState & SK_RLMT_PCS_TX))) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event)) + return; + } + + /* Stop port's timers. */ + SkTimerStop(pAC, IoC, &pRPort->UpTimer); + SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + + if (pRPort->PortState != SK_RLMT_PS_LINK_DOWN) { + pRPort->PortState = SK_RLMT_PS_DOWN; + } + + if (!pRPort->PortDown) { + pRPort->Net->PortsUp--; + pRPort->PortDown = SK_TRUE; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_DOWN, Para); + } + + pRPort->PacketsPerTimeSlot = 0; + /* pRPort->DataPacketsPerTimeSlot = 0; */ + pRPort->BpduPacketsPerTimeSlot = 0; + pRPort->BcTimeStamp = 0; + + /* + * RA;:;: To be checked: + * - actions at RLMT_STOP: We should not switch anymore. + */ + if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) { + if (Para.Para32[0] == + pRPort->Net->Port[pRPort->Net->ActivePort]->PortNumber) { + /* Active Port went down. */ + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Event (%d) END.\n", Event)) +} /* SkRlmtEvtPortDownX */ + + +/****************************************************************************** + * + * SkRlmtEvtLinkDown - LINK_DOWN + * + * Description: + * This routine handles LINK_DOWN events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtLinkDown( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ +{ + SK_RLMT_PORT *pRPort; + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_DOWN Port %d Event BEGIN.\n", Para.Para32[0])) + + if (!pAC->Rlmt.Port[Para.Para32[0]].LinkDown) { + pRPort->Net->LinksUp--; + pRPort->LinkDown = SK_TRUE; + pRPort->PortState = SK_RLMT_PS_LINK_DOWN; + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_OFF); + + if ((pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) != 0) { + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); + } + + /* Ensure that port is marked down. */ + Para.Para32[1] = -1; + (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PORTDOWN, Para); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_DOWN Event END.\n")) +} /* SkRlmtEvtLinkDown */ + + +/****************************************************************************** + * + * SkRlmtEvtPortAddr - PORT_ADDR + * + * Description: + * This routine handles PORT_ADDR events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortAddr( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_U32 i, j; + SK_RLMT_PORT *pRPort; + SK_MAC_ADDR *pOldMacAddr; + SK_MAC_ADDR *pNewMacAddr; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORT_ADDR Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORT_ADDR Event EMPTY.\n")) + return; + } + + /* Port's physical MAC address changed. */ + pOldMacAddr = &pAC->Addr.Port[Para.Para32[0]].PreviousMacAddress; + pNewMacAddr = &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress; + + /* + * NOTE: This is not scalable for solutions where ports are + * checked remotely. There, we need to send an RLMT + * address change packet - and how do we ensure delivery? + */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + pRPort = &pAC->Rlmt.Port[i]; + for (j = 0; j < pRPort->PortsChecked; j++) { + if (SK_ADDR_EQUAL( + pRPort->PortCheck[j].CheckAddr.a, pOldMacAddr->a)) { + pRPort->PortCheck[j].CheckAddr = *pNewMacAddr; + } + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORT_ADDR Event END.\n")) +} /* SkRlmtEvtPortAddr */ + + +/****************************************************************************** + * + * SkRlmtEvtStart - START + * + * Description: + * This routine handles START events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStart( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_EVPARA Para2; + SK_U32 PortIdx; + SK_U32 PortNumber; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Net %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState != SK_RLMT_RS_INIT) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.NetsStarted >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("All nets should have been started.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.Net[Para.Para32[0]].PrefPort >= + pAC->Rlmt.Net[Para.Para32[0]].NumPorts) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E009, SKERR_RLMT_E009_MSG); + + /* Change PrefPort to internal default. */ + Para2.Para32[0] = 0xFFFFFFFF; + Para2.Para32[1] = Para.Para32[0]; + (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, Para2); + } + + PortIdx = pAC->Rlmt.Net[Para.Para32[0]].PrefPort; + PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[PortIdx]->PortNumber; + + pAC->Rlmt.Net[Para.Para32[0]].LinksUp = 0; + pAC->Rlmt.Net[Para.Para32[0]].PortsUp = 0; + pAC->Rlmt.Net[Para.Para32[0]].CheckingState = 0; + pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_NET_DOWN; + + /* Start preferred port. */ + SkRlmtPortStart(pAC, IoC, PortNumber); + + /* Start Timer (for first port only). */ + Para2.Para32[0] = PortNumber; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer, + SK_RLMT_PORTSTART_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTSTART_TIM, Para2); + + pAC->Rlmt.NetsStarted++; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event END.\n")) +} /* SkRlmtEvtStart */ + + +/****************************************************************************** + * + * SkRlmtEvtStop - STOP + * + * Description: + * This routine handles STOP events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStop( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_EVPARA Para2; + SK_U32 PortNumber; + SK_U32 i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Net %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState == SK_RLMT_RS_INIT) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.NetsStarted == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("All nets are stopped.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + /* Stop RLMT timers. */ + SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer); + SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer); + + /* Stop net. */ + pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[Para.Para32[0]].RootIdSet = SK_FALSE; + Para2.Para32[0] = SK_RLMT_NET_DOWN_FINAL; + Para2.Para32[1] = Para.Para32[0]; /* Net# */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para2); + + /* Stop ports. */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber; + if (pAC->Rlmt.Port[PortNumber].PortState != SK_RLMT_PS_INIT) { + SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer); + SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownRxTimer); + SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownTxTimer); + + pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_INIT; + pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE; + pAC->Rlmt.Port[PortNumber].PortStarted = SK_FALSE; + Para2.Para32[0] = PortNumber; + Para2.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para2); + } + } + + pAC->Rlmt.NetsStarted--; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event END.\n")) +} /* SkRlmtEvtStop */ + + +/****************************************************************************** + * + * SkRlmtEvtTim - TIM + * + * Description: + * This routine handles TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_RLMT_PORT *pRPort; + SK_U32 Timeout; + SK_U32 NewTimeout; + SK_U32 PortNumber; + SK_U32 i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_TIM Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_TIM Event EMPTY.\n")) + return; + } + + if ((pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_OTHERS) == 0 || + pAC->Rlmt.Net[Para.Para32[0]].LinksUp == 0) { + /* Mode changed or all links down: No more link checking. */ + return; + } + +#if 0 + pAC->Rlmt.SwitchCheckCounter--; + if (pAC->Rlmt.SwitchCheckCounter == 0) { + pAC->Rlmt.SwitchCheckCounter; + } +#endif /* 0 */ + + NewTimeout = SK_RLMT_DEF_TO_VAL; + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber; + pRPort = &pAC->Rlmt.Port[PortNumber]; + if (!pRPort->LinkDown) { + Timeout = SkRlmtCheckPort(pAC, IoC, PortNumber); + if (Timeout < NewTimeout) { + NewTimeout = Timeout; + } + + /* + * These counters should be set to 0 for all ports before the + * first frame is sent in the next loop. + */ + pRPort->PacketsPerTimeSlot = 0; + /* pRPort->DataPacketsPerTimeSlot = 0; */ + pRPort->BpduPacketsPerTimeSlot = 0; + } + } + pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue = NewTimeout; + + if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1) { + /* + * If checking remote ports, also send packets if + * (LinksUp == 1) && + * this port checks at least one (remote) port. + */ + + /* + * Must be new loop, as SkRlmtCheckPort can request to + * check segmentation when e.g. checking the last port. + */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + if (!pAC->Rlmt.Net[Para.Para32[0]].Port[i]->LinkDown) { + SkRlmtSend(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber); + } + } + } + + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer, + pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, + Para); + + if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1 && + (pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_SEG) && + (pAC->Rlmt.Net[Para.Para32[0]].CheckingState & SK_RLMT_RCS_START_SEG)) { + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer, + SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para); + pAC->Rlmt.Net[Para.Para32[0]].CheckingState &= ~SK_RLMT_RCS_START_SEG; + pAC->Rlmt.Net[Para.Para32[0]].CheckingState |= + SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_TIM Event END.\n")) +} /* SkRlmtEvtTim */ + + +/****************************************************************************** + * + * SkRlmtEvtSegTim - SEG_TIM + * + * Description: + * This routine handles SEG_TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtSegTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ +#ifdef xDEBUG + int j; +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SEG_TIM Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SEG_TIM Event EMPTY.\n")) + return; + } + +#ifdef xDEBUG + for (j = 0; j < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; j++) { + SK_ADDR_PORT *pAPort; + SK_U32 k; + SK_U16 *InAddr; + SK_U8 InAddr8[6]; + + InAddr = (SK_U16 *)&InAddr8[0]; + pAPort = pAC->Rlmt.Net[Para.Para32[0]].Port[j]->AddrPort; + for (k = 0; k < pAPort->NextExactMatchRlmt; k++) { + /* Get exact match address k from port j. */ + XM_INADDR(IoC, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber, + XM_EXM(k), InAddr); + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("MC address %d on Port %u: %02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x.\n", + k, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber, + InAddr8[0], InAddr8[1], InAddr8[2], + InAddr8[3], InAddr8[4], InAddr8[5], + pAPort->Exact[k].a[0], pAPort->Exact[k].a[1], + pAPort->Exact[k].a[2], pAPort->Exact[k].a[3], + pAPort->Exact[k].a[4], pAPort->Exact[k].a[5])) + } + } +#endif /* xDEBUG */ + + SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SEG_TIM Event END.\n")) +} /* SkRlmtEvtSegTim */ + + +/****************************************************************************** + * + * SkRlmtEvtPacketRx - PACKET_RECEIVED + * + * Description: + * This routine handles PACKET_RECEIVED events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPacketRx( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_MBUF *pMb */ +{ + SK_MBUF *pMb; + SK_MBUF *pNextMb; + SK_U32 NetNumber; + + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n")) + + /* Should we ignore frames during port switching? */ + +#ifdef DEBUG + pMb = Para.pParaPtr; + if (pMb == NULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("No mbuf.\n")) + } + else if (pMb->pNext != NULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("More than one mbuf or pMb->pNext not set.\n")) + } +#endif /* DEBUG */ + + for (pMb = Para.pParaPtr; pMb != NULL; pMb = pNextMb) { + pNextMb = pMb->pNext; + pMb->pNext = NULL; + + NetNumber = pAC->Rlmt.Port[pMb->PortIdx].Net->NetNumber; + if (pAC->Rlmt.Net[NetNumber].RlmtState == SK_RLMT_RS_INIT) { + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + else { + SkRlmtPacketReceive(pAC, IoC, pMb); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PACKET_RECEIVED Event END.\n")) +} /* SkRlmtEvtPacketRx */ + + +/****************************************************************************** + * + * SkRlmtEvtStatsClear - STATS_CLEAR + * + * Description: + * This routine handles STATS_CLEAR events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStatsClear( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_U32 i; + SK_RLMT_PORT *pRPort; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event EMPTY.\n")) + return; + } + + /* Clear statistics for logical and physical ports. */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + pRPort = + &pAC->Rlmt.Port[pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber]; + pRPort->TxHelloCts = 0; + pRPort->RxHelloCts = 0; + pRPort->TxSpHelloReqCts = 0; + pRPort->RxSpHelloCts = 0; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event END.\n")) +} /* SkRlmtEvtStatsClear */ + + +/****************************************************************************** + * + * SkRlmtEvtStatsUpdate - STATS_UPDATE + * + * Description: + * This routine handles STATS_UPDATE events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStatsUpdate( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event EMPTY.\n")) + return; + } + + /* Update statistics - currently always up-to-date. */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event END.\n")) +} /* SkRlmtEvtStatsUpdate */ + + +/****************************************************************************** + * + * SkRlmtEvtPrefportChange - PREFPORT_CHANGE + * + * Description: + * This routine handles PREFPORT_CHANGE events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPrefportChange( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortIndex; SK_U32 NetNumber */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE to Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[1])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n")) + return; + } + + /* 0xFFFFFFFF == auto-mode. */ + if (Para.Para32[0] == 0xFFFFFFFF) { + pAC->Rlmt.Net[Para.Para32[1]].PrefPort = SK_RLMT_DEF_PREF_PORT; + } + else { + if (Para.Para32[0] >= pAC->Rlmt.Net[Para.Para32[1]].NumPorts) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E010, SKERR_RLMT_E010_MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n")) + return; + } + + pAC->Rlmt.Net[Para.Para32[1]].PrefPort = Para.Para32[0]; + } + + pAC->Rlmt.Net[Para.Para32[1]].Preference = Para.Para32[0]; + + if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) { + SkRlmtCheckSwitch(pAC, IoC, Para.Para32[1]); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE Event END.\n")) +} /* SkRlmtEvtPrefportChange */ + + +/****************************************************************************** + * + * SkRlmtEvtSetNets - SET_NETS + * + * Description: + * This routine handles SET_NETS events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtSetNets( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NumNets; SK_U32 -1 */ +{ + int i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] == 0 || Para.Para32[0] > SK_MAX_NETS || + Para.Para32[0] > (SK_U32)pAC->GIni.GIMacsFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad number of nets: %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] == pAC->Rlmt.NumNets) { /* No change. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + /* Entering and leaving dual mode only allowed while nets are stopped. */ + if (pAC->Rlmt.NetsStarted > 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Changing dual mode only allowed while all nets are stopped.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] == 1) { + if (pAC->Rlmt.NumNets > 1) { + /* Clear logical MAC addr from second net's active port. */ + (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr. + Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_CLEAR_LOGICAL); + pAC->Rlmt.Net[1].NumPorts = 0; + } + + pAC->Rlmt.NumNets = Para.Para32[0]; + for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { + pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */ + pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; + /* Just assuming. */ + pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; + pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; + pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; + pAC->Rlmt.Net[i].NetNumber = i; + } + + pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[0]; + pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound; + + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("RLMT: Changed to one net with two ports.\n")) + } + else if (Para.Para32[0] == 2) { + pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[1]; + pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1; + pAC->Rlmt.Net[0].NumPorts = + pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts; + + pAC->Rlmt.NumNets = Para.Para32[0]; + for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { + pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */ + pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; + /* Just assuming. */ + pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; + pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; + pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; + + pAC->Rlmt.Net[i].NetNumber = i; + } + + /* Set logical MAC addr on second net's active port. */ + (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr. + Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_SET_LOGICAL); + + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("RLMT: Changed to two nets with one port each.\n")) + } + else { + /* Not implemented for more than two nets. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SetNets not implemented for more than two nets.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event END.\n")) +} /* SkRlmtSetNets */ + + +/****************************************************************************** + * + * SkRlmtEvtModeChange - MODE_CHANGE + * + * Description: + * This routine handles MODE_CHANGE events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtModeChange( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NewMode; SK_U32 NetNumber */ +{ + SK_EVPARA Para2; + SK_U32 i; + SK_U32 PrevRlmtMode; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event BEGIN.\n")) + + if (Para.Para32[1] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[1])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event EMPTY.\n")) + return; + } + + Para.Para32[0] |= SK_RLMT_CHECK_LINK; + + if ((pAC->Rlmt.Net[Para.Para32[1]].NumPorts == 1) && + Para.Para32[0] != SK_RLMT_MODE_CLS) { + pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = SK_RLMT_MODE_CLS; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Forced RLMT mode to CLS on single port net.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event EMPTY.\n")) + return; + } + + /* Update RLMT mode. */ + PrevRlmtMode = pAC->Rlmt.Net[Para.Para32[1]].RlmtMode; + pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = Para.Para32[0]; + + if ((PrevRlmtMode & SK_RLMT_CHECK_LOC_LINK) != + (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { + /* SK_RLMT_CHECK_LOC_LINK bit changed. */ + if ((PrevRlmtMode & SK_RLMT_CHECK_OTHERS) == 0 && + pAC->Rlmt.Net[Para.Para32[1]].NumPorts > 1 && + pAC->Rlmt.Net[Para.Para32[1]].PortsUp >= 1) { + /* 20001207 RA: Was "PortsUp == 1". */ + Para2.Para32[0] = Para.Para32[1]; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].LocTimer, + pAC->Rlmt.Net[Para.Para32[1]].TimeoutValue, + SKGE_RLMT, SK_RLMT_TIM, Para2); + } + } + + if ((PrevRlmtMode & SK_RLMT_CHECK_SEG) != + (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG)) { + /* SK_RLMT_CHECK_SEG bit changed. */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[1]].NumPorts; i++) { + (void)SkAddrMcClear(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, + SK_ADDR_PERMANENT | SK_MC_SW_ONLY); + + /* Add RLMT MC address. */ + (void)SkAddrMcAdd(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, + &SkRlmtMcAddr, SK_ADDR_PERMANENT); + + if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & + SK_RLMT_CHECK_SEG) != 0) { + /* Add BPDU MC address. */ + (void)SkAddrMcAdd(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, + &BridgeMcAddr, SK_ADDR_PERMANENT); + + if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) { + if (!pAC->Rlmt.Net[Para.Para32[1]].Port[i]->LinkDown && + (Para2.pParaPtr = SkRlmtBuildSpanningTreePacket( + pAC, IoC, i)) != NULL) { + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->RootIdSet = + SK_FALSE; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); + } + } + } + (void)SkAddrMcUpdate(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber); + } /* for ... */ + + if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG) != 0) { + Para2.Para32[0] = Para.Para32[1]; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].SegTimer, + SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para2); + } + } /* SK_RLMT_CHECK_SEG bit changed. */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event END.\n")) +} /* SkRlmtEvtModeChange */ + + +/****************************************************************************** + * + * SkRlmtEvent - a PORT- or an RLMT-specific event happened + * + * Description: + * This routine calls subroutines to handle PORT- and RLMT-specific events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * 0 + */ +int SkRlmtEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Event, /* Event code */ +SK_EVPARA Para) /* Event-specific parameter */ +{ + switch (Event) { + + /* ----- PORT events ----- */ + + case SK_RLMT_PORTSTART_TIM: /* From RLMT via TIME. */ + SkRlmtEvtPortStartTim(pAC, IoC, Para); + break; + case SK_RLMT_LINK_UP: /* From SIRQ. */ + SkRlmtEvtLinkUp(pAC, IoC, Para); + break; + case SK_RLMT_PORTUP_TIM: /* From RLMT via TIME. */ + SkRlmtEvtPortUpTim(pAC, IoC, Para); + break; + case SK_RLMT_PORTDOWN: /* From RLMT. */ + case SK_RLMT_PORTDOWN_RX_TIM: /* From RLMT via TIME. */ + case SK_RLMT_PORTDOWN_TX_TIM: /* From RLMT via TIME. */ + SkRlmtEvtPortDownX(pAC, IoC, Event, Para); + break; + case SK_RLMT_LINK_DOWN: /* From SIRQ. */ + SkRlmtEvtLinkDown(pAC, IoC, Para); + break; + case SK_RLMT_PORT_ADDR: /* From ADDR. */ + SkRlmtEvtPortAddr(pAC, IoC, Para); + break; + + /* ----- RLMT events ----- */ + + case SK_RLMT_START: /* From DRV. */ + SkRlmtEvtStart(pAC, IoC, Para); + break; + case SK_RLMT_STOP: /* From DRV. */ + SkRlmtEvtStop(pAC, IoC, Para); + break; + case SK_RLMT_TIM: /* From RLMT via TIME. */ + SkRlmtEvtTim(pAC, IoC, Para); + break; + case SK_RLMT_SEG_TIM: + SkRlmtEvtSegTim(pAC, IoC, Para); + break; + case SK_RLMT_PACKET_RECEIVED: /* From DRV. */ + SkRlmtEvtPacketRx(pAC, IoC, Para); + break; + case SK_RLMT_STATS_CLEAR: /* From PNMI. */ + SkRlmtEvtStatsClear(pAC, IoC, Para); + break; + case SK_RLMT_STATS_UPDATE: /* From PNMI. */ + SkRlmtEvtStatsUpdate(pAC, IoC, Para); + break; + case SK_RLMT_PREFPORT_CHANGE: /* From PNMI. */ + SkRlmtEvtPrefportChange(pAC, IoC, Para); + break; + case SK_RLMT_MODE_CHANGE: /* From PNMI. */ + SkRlmtEvtModeChange(pAC, IoC, Para); + break; + case SK_RLMT_SET_NETS: /* From DRV. */ + SkRlmtEvtSetNets(pAC, IoC, Para); + break; + + /* ----- Unknown events ----- */ + + default: /* Create error log entry. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Unknown RLMT Event %d.\n", Event)) + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E003, SKERR_RLMT_E003_MSG); + break; + } /* switch() */ + + return (0); +} /* SkRlmtEvent */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ diff --git a/drivers/net/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c new file mode 100644 index 00000000000..4e462955ecd --- /dev/null +++ b/drivers/net/sk98lin/sktimer.c @@ -0,0 +1,250 @@ +/****************************************************************************** + * + * Name: sktimer.c + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.14 $ + * Date: $Date: 2003/09/16 13:46:51 $ + * Purpose: High level timer functions. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + +/* + * Event queue and dispatcher + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: sktimer.c,v 1.14 2003/09/16 13:46:51 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + Event queue management. + + General Description: + + */ +intro() +{} +#endif + + +/* Forward declaration */ +static void timer_done(SK_AC *pAC,SK_IOC Ioc,int Restart); + + +/* + * Inits the software timer + * + * needs to be called during Init level 1. + */ +void SkTimerInit( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +int Level) /* Init Level */ +{ + switch (Level) { + case SK_INIT_DATA: + pAC->Tim.StQueue = NULL; + break; + case SK_INIT_IO: + SkHwtInit(pAC, Ioc); + SkTimerDone(pAC, Ioc); + break; + default: + break; + } +} + +/* + * Stops a high level timer + * - If a timer is not in the queue the function returns normally, too. + */ +void SkTimerStop( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +SK_TIMER *pTimer) /* Timer Pointer to be started */ +{ + SK_TIMER **ppTimPrev; + SK_TIMER *pTm; + + /* + * remove timer from queue + */ + pTimer->TmActive = SK_FALSE; + + if (pAC->Tim.StQueue == pTimer && !pTimer->TmNext) { + SkHwtStop(pAC, Ioc); + } + + for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev); + ppTimPrev = &pTm->TmNext ) { + + if (pTm == pTimer) { + /* + * Timer found in queue + * - dequeue it and + * - correct delta of the next timer + */ + *ppTimPrev = pTm->TmNext; + + if (pTm->TmNext) { + /* correct delta of next timer in queue */ + pTm->TmNext->TmDelta += pTm->TmDelta; + } + return; + } + } +} + +/* + * Start a high level software timer + */ +void SkTimerStart( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +SK_TIMER *pTimer, /* Timer Pointer to be started */ +SK_U32 Time, /* Time value */ +SK_U32 Class, /* Event Class for this timer */ +SK_U32 Event, /* Event Value for this timer */ +SK_EVPARA Para) /* Event Parameter for this timer */ +{ + SK_TIMER **ppTimPrev; + SK_TIMER *pTm; + SK_U32 Delta; + + Time /= 16; /* input is uS, clock ticks are 16uS */ + + if (!Time) + Time = 1; + + SkTimerStop(pAC, Ioc, pTimer); + + pTimer->TmClass = Class; + pTimer->TmEvent = Event; + pTimer->TmPara = Para; + pTimer->TmActive = SK_TRUE; + + if (!pAC->Tim.StQueue) { + /* First Timer to be started */ + pAC->Tim.StQueue = pTimer; + pTimer->TmNext = NULL; + pTimer->TmDelta = Time; + + SkHwtStart(pAC, Ioc, Time); + + return; + } + + /* + * timer correction + */ + timer_done(pAC, Ioc, 0); + + /* + * find position in queue + */ + Delta = 0; + for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev); + ppTimPrev = &pTm->TmNext ) { + + if (Delta + pTm->TmDelta > Time) { + /* Position found */ + /* Here the timer needs to be inserted. */ + break; + } + Delta += pTm->TmDelta; + } + + /* insert in queue */ + *ppTimPrev = pTimer; + pTimer->TmNext = pTm; + pTimer->TmDelta = Time - Delta; + + if (pTm) { + /* There is a next timer + * -> correct its Delta value. + */ + pTm->TmDelta -= pTimer->TmDelta; + } + + /* restart with first */ + SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta); +} + + +void SkTimerDone( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + timer_done(pAC, Ioc, 1); +} + + +static void timer_done( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +int Restart) /* Do we need to restart the Hardware timer ? */ +{ + SK_U32 Delta; + SK_TIMER *pTm; + SK_TIMER *pTComp; /* Timer completed now now */ + SK_TIMER **ppLast; /* Next field of Last timer to be deq */ + int Done = 0; + + Delta = SkHwtRead(pAC, Ioc); + + ppLast = &pAC->Tim.StQueue; + pTm = pAC->Tim.StQueue; + while (pTm && !Done) { + if (Delta >= pTm->TmDelta) { + /* Timer ran out */ + pTm->TmActive = SK_FALSE; + Delta -= pTm->TmDelta; + ppLast = &pTm->TmNext; + pTm = pTm->TmNext; + } + else { + /* We found the first timer that did not run out */ + pTm->TmDelta -= Delta; + Delta = 0; + Done = 1; + } + } + *ppLast = NULL; + /* + * pTm points to the first Timer that did not run out. + * StQueue points to the first Timer that run out. + */ + + for ( pTComp = pAC->Tim.StQueue; pTComp; pTComp = pTComp->TmNext) { + SkEventQueue(pAC,pTComp->TmClass, pTComp->TmEvent, pTComp->TmPara); + } + + /* Set head of timer queue to the first timer that did not run out */ + pAC->Tim.StQueue = pTm; + + if (Restart && pAC->Tim.StQueue) { + /* Restart HW timer */ + SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta); + } +} + +/* End of file */ diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c new file mode 100644 index 00000000000..1e662aaebf8 --- /dev/null +++ b/drivers/net/sk98lin/skvpd.c @@ -0,0 +1,1091 @@ +/****************************************************************************** + * + * Name: skvpd.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.37 $ + * Date: $Date: 2003/01/13 10:42:45 $ + * Purpose: Shared software to read and write VPD data + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + Please refer skvpd.txt for information how to include this module + */ +static const char SysKonnectFileId[] = + "@(#)$Id: skvpd.c,v 1.37 2003/01/13 10:42:45 rschmidt Exp $ (C) SK"; + +#include "h/skdrv1st.h" +#include "h/sktypes.h" +#include "h/skdebug.h" +#include "h/skdrv2nd.h" + +/* + * Static functions + */ +#ifndef SK_KR_PROTO +static SK_VPD_PARA *vpd_find_para( + SK_AC *pAC, + const char *key, + SK_VPD_PARA *p); +#else /* SK_KR_PROTO */ +static SK_VPD_PARA *vpd_find_para(); +#endif /* SK_KR_PROTO */ + +/* + * waits for a completion of a VPD transfer + * The VPD transfer must complete within SK_TICKS_PER_SEC/16 + * + * returns 0: success, transfer completes + * error exit(9) with a error message + */ +static int VpdWait( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +int event) /* event to wait for (VPD_READ / VPD_write) completion*/ +{ + SK_U64 start_time; + SK_U16 state; + + SK_DBG_MSG(pAC,SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD wait for %s\n", event?"Write":"Read")); + start_time = SkOsGetTime(pAC); + do { + if (SkOsGetTime(pAC) - start_time > SK_TICKS_PER_SEC) { + + /* Bug fix AF: Thu Mar 28 2002 + * Do not call: VPD_STOP(pAC, IoC); + * A pending VPD read cycle can not be aborted by writing + * VPD_WRITE to the PCI_VPD_ADR_REG (VPD address register). + * Although the write threshold in the OUR-register protects + * VPD read only space from being overwritten this does not + * protect a VPD read from being `converted` into a VPD write + * operation (on the fly). As a consequence the VPD_STOP would + * delete VPD read only data. In case of any problems with the + * I2C bus we exit the loop here. The I2C read operation can + * not be aborted except by a reset (->LR). + */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_FATAL | SK_DBGCAT_ERR, + ("ERROR:VPD wait timeout\n")); + return(1); + } + + VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state); + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("state = %x, event %x\n",state,event)); + } while((int)(state & PCI_VPD_FLAG) == event); + + return(0); +} + +#ifdef SKDIAG + +/* + * Read the dword at address 'addr' from the VPD EEPROM. + * + * Needed Time: MIN 1,3 ms MAX 2,6 ms + * + * Note: The DWord is returned in the endianess of the machine the routine + * is running on. + * + * Returns the data read. + */ +SK_U32 VpdReadDWord( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +int addr) /* VPD address */ +{ + SK_U32 Rtv; + + /* start VPD read */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD read dword at 0x%x\n",addr)); + addr &= ~VPD_WRITE; /* ensure the R/W bit is set to read */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)addr); + + /* ignore return code here */ + (void)VpdWait(pAC, IoC, VPD_READ); + + /* Don't swap here, it's a data stream of bytes */ + Rtv = 0; + + VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv); + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD read dword data = 0x%x\n",Rtv)); + return(Rtv); +} + +#endif /* SKDIAG */ + +/* + * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from + * or to the I2C EEPROM. + * + * Returns number of bytes read / written. + */ +static int VpdWriteStream( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +char *buf, /* data buffer */ +int Addr, /* VPD start address */ +int Len) /* number of bytes to read / to write */ +{ + int i; + int j; + SK_U16 AdrReg; + int Rtv; + SK_U8 * pComp; /* Compare pointer */ + SK_U8 Data; /* Input Data for Compare */ + + /* Init Compare Pointer */ + pComp = (SK_U8 *) buf; + + for (i = 0; i < Len; i++, buf++) { + if ((i%sizeof(SK_U32)) == 0) { + /* + * At the begin of each cycle read the Data Reg + * So it is initialized even if only a few bytes + * are written. + */ + AdrReg = (SK_U16) Addr; + AdrReg &= ~VPD_WRITE; /* READ operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_READ); + if (Rtv != 0) { + return(i); + } + } + + /* Write current Byte */ + VPD_OUT8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)), + *(SK_U8*)buf); + + if (((i%sizeof(SK_U32)) == 3) || (i == (Len - 1))) { + /* New Address needs to be written to VPD_ADDR reg */ + AdrReg = (SK_U16) Addr; + Addr += sizeof(SK_U32); + AdrReg |= VPD_WRITE; /* WRITE operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_WRITE); + if (Rtv != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Write Timed Out\n")); + return(i - (i%sizeof(SK_U32))); + } + + /* + * Now re-read to verify + */ + AdrReg &= ~VPD_WRITE; /* READ operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_READ); + if (Rtv != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Verify Timed Out\n")); + return(i - (i%sizeof(SK_U32))); + } + + for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) { + + VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data); + + if (Data != *pComp) { + /* Verify Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("WriteStream Verify Error\n")); + return(i - (i%sizeof(SK_U32)) + j); + } + } + } + } + + return(Len); +} + + +/* + * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from + * or to the I2C EEPROM. + * + * Returns number of bytes read / written. + */ +static int VpdReadStream( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +char *buf, /* data buffer */ +int Addr, /* VPD start address */ +int Len) /* number of bytes to read / to write */ +{ + int i; + SK_U16 AdrReg; + int Rtv; + + for (i = 0; i < Len; i++, buf++) { + if ((i%sizeof(SK_U32)) == 0) { + /* New Address needs to be written to VPD_ADDR reg */ + AdrReg = (SK_U16) Addr; + Addr += sizeof(SK_U32); + AdrReg &= ~VPD_WRITE; /* READ operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_READ); + if (Rtv != 0) { + return(i); + } + } + VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)), + (SK_U8 *)buf); + } + + return(Len); +} + +/* + * Read ore writes 'len' bytes of VPD data, starting at 'addr' from + * or to the I2C EEPROM. + * + * Returns number of bytes read / written. + */ +static int VpdTransferBlock( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +char *buf, /* data buffer */ +int addr, /* VPD start address */ +int len, /* number of bytes to read / to write */ +int dir) /* transfer direction may be VPD_READ or VPD_WRITE */ +{ + int Rtv; /* Return value */ + int vpd_rom_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD %s block, addr = 0x%x, len = %d\n", + dir ? "write" : "read", addr, len)); + + if (len == 0) + return(0); + + vpd_rom_size = pAC->vpd.rom_size; + + if (addr > vpd_rom_size - 4) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Address error: 0x%x, exp. < 0x%x\n", + addr, vpd_rom_size - 4)); + return(0); + } + + if (addr + len > vpd_rom_size) { + len = vpd_rom_size - addr; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Warning: len was cut to %d\n", len)); + } + + if (dir == VPD_READ) { + Rtv = VpdReadStream(pAC, IoC, buf, addr, len); + } + else { + Rtv = VpdWriteStream(pAC, IoC, buf, addr, len); + } + + return(Rtv); +} + +#ifdef SKDIAG + +/* + * Read 'len' bytes of VPD data, starting at 'addr'. + * + * Returns number of bytes read. + */ +int VpdReadBlock( +SK_AC *pAC, /* pAC pointer */ +SK_IOC IoC, /* IO Context */ +char *buf, /* buffer were the data should be stored */ +int addr, /* start reading at the VPD address */ +int len) /* number of bytes to read */ +{ + return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_READ)); +} + +/* + * Write 'len' bytes of *but to the VPD EEPROM, starting at 'addr'. + * + * Returns number of bytes writes. + */ +int VpdWriteBlock( +SK_AC *pAC, /* pAC pointer */ +SK_IOC IoC, /* IO Context */ +char *buf, /* buffer, holds the data to write */ +int addr, /* start writing at the VPD address */ +int len) /* number of bytes to write */ +{ + return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_WRITE)); +} +#endif /* SKDIAG */ + +/* + * (re)initialize the VPD buffer + * + * Reads the VPD data from the EEPROM into the VPD buffer. + * Get the remaining read only and read / write space. + * + * return 0: success + * 1: fatal VPD error + */ +static int VpdInit( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC) /* IO Context */ +{ + SK_VPD_PARA *r, rp; /* RW or RV */ + int i; + unsigned char x; + int vpd_size; + SK_U16 dev_id; + SK_U32 our_reg2; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. ")); + + VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id); + + VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2); + + pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14); + + /* + * this function might get used before the hardware is initialized + * therefore we cannot always trust in GIChipId + */ + if (((pAC->vpd.v.vpd_status & VPD_VALID) == 0 && + dev_id != VPD_DEV_ID_GENESIS) || + ((pAC->vpd.v.vpd_status & VPD_VALID) != 0 && + !pAC->GIni.GIGenesis)) { + + /* for Yukon the VPD size is always 256 */ + vpd_size = VPD_SIZE_YUKON; + } + else { + /* Genesis uses the maximum ROM size up to 512 for VPD */ + if (pAC->vpd.rom_size > VPD_SIZE_GENESIS) { + vpd_size = VPD_SIZE_GENESIS; + } + else { + vpd_size = pAC->vpd.rom_size; + } + } + + /* read the VPD data into the VPD buffer */ + if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf, 0, vpd_size, VPD_READ) + != vpd_size) { + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Block Read Error\n")); + return(1); + } + + pAC->vpd.vpd_size = vpd_size; + + /* Asus K8V Se Deluxe bugfix. Correct VPD content */ + /* MBo April 2004 */ + if (((unsigned char)pAC->vpd.vpd_buf[0x3f] == 0x38) && + ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) && + ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45)) { + printk("sk98lin: Asus mainboard with buggy VPD? " + "Correcting data.\n"); + pAC->vpd.vpd_buf[0x40] = 0x38; + } + + + /* find the end tag of the RO area */ + if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: RV Tag not found\n")); + return(1); + } + + if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) { + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: Invalid VPD struct size\n")); + return(1); + } + pAC->vpd.v.vpd_free_ro = r->p_len - 1; + + /* test the checksum */ + for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) { + x += pAC->vpd.vpd_buf[i]; + } + + if (x != 0) { + /* checksum error */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("VPD Checksum Error\n")); + return(1); + } + + /* find and check the end tag of the RW area */ + if (!(r = vpd_find_para(pAC, VPD_RW, &rp))) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: RV Tag not found\n")); + return(1); + } + + if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: Invalid VPD struct size\n")); + return(1); + } + pAC->vpd.v.vpd_free_rw = r->p_len; + + /* everything seems to be ok */ + if (pAC->GIni.GIChipId != 0) { + pAC->vpd.v.vpd_status |= VPD_VALID; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, + ("done. Free RO = %d, Free RW = %d\n", + pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw)); + + return(0); +} + +/* + * find the Keyword 'key' in the VPD buffer and fills the + * parameter struct 'p' with it's values + * + * returns *p success + * 0: parameter was not found or VPD encoding error + */ +static SK_VPD_PARA *vpd_find_para( +SK_AC *pAC, /* common data base */ +const char *key, /* keyword to find (e.g. "MN") */ +SK_VPD_PARA *p) /* parameter description struct */ +{ + char *v ; /* points to VPD buffer */ + int max; /* Maximum Number of Iterations */ + + v = pAC->vpd.vpd_buf; + max = 128; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD find para %s .. ",key)); + + /* check mandatory resource type ID string (Product Name) */ + if (*v != (char)RES_ID) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Error: 0x%x missing\n", RES_ID)); + return NULL; + } + + if (strcmp(key, VPD_NAME) == 0) { + p->p_len = VPD_GET_RES_LEN(v); + p->p_val = VPD_GET_VAL(v); + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("found, len = %d\n", p->p_len)); + return(p); + } + + v += 3 + VPD_GET_RES_LEN(v) + 3; + for (;; ) { + if (SK_MEMCMP(key,v,2) == 0) { + p->p_len = VPD_GET_VPD_LEN(v); + p->p_val = VPD_GET_VAL(v); + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("found, len = %d\n",p->p_len)); + return(p); + } + + /* exit when reaching the "RW" Tag or the maximum of itera. */ + max--; + if (SK_MEMCMP(VPD_RW,v,2) == 0 || max == 0) { + break; + } + + if (SK_MEMCMP(VPD_RV,v,2) == 0) { + v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */ + } + else { + v += 3 + VPD_GET_VPD_LEN(v); + } + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("scanning '%c%c' len = %d\n",v[0],v[1],v[2])); + } + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("not found\n")); + if (max == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Key/Len Encoding error\n")); + } +#endif /* DEBUG */ + return NULL; +} + +/* + * Move 'n' bytes. Begin with the last byte if 'n' is > 0, + * Start with the last byte if n is < 0. + * + * returns nothing + */ +static void vpd_move_para( +char *start, /* start of memory block */ +char *end, /* end of memory block to move */ +int n) /* number of bytes the memory block has to be moved */ +{ + char *p; + int i; /* number of byte copied */ + + if (n == 0) + return; + + i = (int) (end - start + 1); + if (n < 0) { + p = start + n; + while (i != 0) { + *p++ = *start++; + i--; + } + } + else { + p = end + n; + while (i != 0) { + *p-- = *end--; + i--; + } + } +} + +/* + * setup the VPD keyword 'key' at 'ip'. + * + * returns nothing + */ +static void vpd_insert_key( +const char *key, /* keyword to insert */ +const char *buf, /* buffer with the keyword value */ +int len, /* length of the value string */ +char *ip) /* inseration point */ +{ + SK_VPD_KEY *p; + + p = (SK_VPD_KEY *) ip; + p->p_key[0] = key[0]; + p->p_key[1] = key[1]; + p->p_len = (unsigned char) len; + SK_MEMCPY(&p->p_val,buf,len); +} + +/* + * Setup the VPD end tag "RV" / "RW". + * Also correct the remaining space variables vpd_free_ro / vpd_free_rw. + * + * returns 0: success + * 1: encoding error + */ +static int vpd_mod_endtag( +SK_AC *pAC, /* common data base */ +char *etp) /* end pointer input position */ +{ + SK_VPD_KEY *p; + unsigned char x; + int i; + int vpd_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD modify endtag at 0x%x = '%c%c'\n",etp,etp[0],etp[1])); + + vpd_size = pAC->vpd.vpd_size; + + p = (SK_VPD_KEY *) etp; + + if (p->p_key[0] != 'R' || (p->p_key[1] != 'V' && p->p_key[1] != 'W')) { + /* something wrong here, encoding error */ + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: invalid end tag\n")); + return(1); + } + if (etp > pAC->vpd.vpd_buf + vpd_size/2) { + /* create "RW" tag */ + p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size-etp-3-1); + pAC->vpd.v.vpd_free_rw = (int) p->p_len; + i = pAC->vpd.v.vpd_free_rw; + etp += 3; + } + else { + /* create "RV" tag */ + p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size/2-etp-3); + pAC->vpd.v.vpd_free_ro = (int) p->p_len - 1; + + /* setup checksum */ + for (i = 0, x = 0; i < vpd_size/2 - p->p_len; i++) { + x += pAC->vpd.vpd_buf[i]; + } + p->p_val = (char) 0 - x; + i = pAC->vpd.v.vpd_free_ro; + etp += 4; + } + while (i) { + *etp++ = 0x00; + i--; + } + + return(0); +} + +/* + * Insert a VPD keyword into the VPD buffer. + * + * The keyword 'key' is inserted at the position 'ip' in the + * VPD buffer. + * The keywords behind the input position will + * be moved. The VPD end tag "RV" or "RW" is generated again. + * + * returns 0: success + * 2: value string was cut + * 4: VPD full, keyword was not written + * 6: fatal VPD error + * + */ +static int VpdSetupPara( +SK_AC *pAC, /* common data base */ +const char *key, /* keyword to insert */ +const char *buf, /* buffer with the keyword value */ +int len, /* length of the keyword value */ +int type, /* VPD_RO_KEY or VPD_RW_KEY */ +int op) /* operation to do: ADD_KEY or OWR_KEY */ +{ + SK_VPD_PARA vp; + char *etp; /* end tag position */ + int free; /* remaining space in selected area */ + char *ip; /* input position inside the VPD buffer */ + int rtv; /* return code */ + int head; /* additional haeder bytes to move */ + int found; /* additinoal bytes if the keyword was found */ + int vpd_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD setup para key = %s, val = %s\n",key,buf)); + + vpd_size = pAC->vpd.vpd_size; + + rtv = 0; + ip = NULL; + if (type == VPD_RW_KEY) { + /* end tag is "RW" */ + free = pAC->vpd.v.vpd_free_rw; + etp = pAC->vpd.vpd_buf + (vpd_size - free - 1 - 3); + } + else { + /* end tag is "RV" */ + free = pAC->vpd.v.vpd_free_ro; + etp = pAC->vpd.vpd_buf + (vpd_size/2 - free - 4); + } + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("Free RO = %d, Free RW = %d\n", + pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw)); + + head = 0; + found = 0; + if (op == OWR_KEY) { + if (vpd_find_para(pAC, key, &vp)) { + found = 3; + ip = vp.p_val - 3; + free += vp.p_len + 3; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("Overwrite Key\n")); + } + else { + op = ADD_KEY; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("Add Key\n")); + } + } + if (op == ADD_KEY) { + ip = etp; + vp.p_len = 0; + head = 3; + } + + if (len + 3 > free) { + if (free < 7) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Buffer Overflow, keyword not written\n")); + return(4); + } + /* cut it again */ + len = free - 3; + rtv = 2; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Buffer Full, Keyword was cut\n")); + } + + vpd_move_para(ip + vp.p_len + found, etp+2, len-vp.p_len+head); + vpd_insert_key(key, buf, len, ip); + if (vpd_mod_endtag(pAC, etp + len - vp.p_len + head)) { + pAC->vpd.v.vpd_status &= ~VPD_VALID; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Encoding Error\n")); + return(6); + } + + return(rtv); +} + + +/* + * Read the contents of the VPD EEPROM and copy it to the + * VPD buffer if not already done. + * + * return: A pointer to the vpd_status structure. The structure contains + * this fields. + */ +SK_VPD_STATUS *VpdStat( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC) /* IO Context */ +{ + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + (void)VpdInit(pAC, IoC); + } + return(&pAC->vpd.v); +} + + +/* + * Read the contents of the VPD EEPROM and copy it to the VPD + * buffer if not already done. + * Scan the VPD buffer for VPD keywords and create the VPD + * keyword list by copying the keywords to 'buf', all after + * each other and terminated with a '\0'. + * + * Exceptions: o The Resource Type ID String (product name) is called "Name" + * o The VPD end tags 'RV' and 'RW' are not listed + * + * The number of copied keywords is counted in 'elements'. + * + * returns 0: success + * 2: buffer overfull, one or more keywords are missing + * 6: fatal VPD error + * + * example values after returning: + * + * buf = "Name\0PN\0EC\0MN\0SN\0CP\0VF\0VL\0YA\0" + * *len = 30 + * *elements = 9 + */ +int VpdKeys( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +char *buf, /* buffer where to copy the keywords */ +int *len, /* buffer length */ +int *elements) /* number of keywords returned */ +{ + char *v; + int n; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("list VPD keys .. ")); + *elements = 0; + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + *len = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Init Error, terminated\n")); + return(6); + } + } + + if ((signed)strlen(VPD_NAME) + 1 <= *len) { + v = pAC->vpd.vpd_buf; + strcpy(buf,VPD_NAME); + n = strlen(VPD_NAME) + 1; + buf += n; + *elements = 1; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, + ("'%c%c' ",v[0],v[1])); + } + else { + *len = 0; + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR, + ("buffer overflow\n")); + return(2); + } + + v += 3 + VPD_GET_RES_LEN(v) + 3; + for (;; ) { + /* exit when reaching the "RW" Tag */ + if (SK_MEMCMP(VPD_RW,v,2) == 0) { + break; + } + + if (SK_MEMCMP(VPD_RV,v,2) == 0) { + v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */ + continue; + } + + if (n+3 <= *len) { + SK_MEMCPY(buf,v,2); + buf += 2; + *buf++ = '\0'; + n += 3; + v += 3 + VPD_GET_VPD_LEN(v); + *elements += 1; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, + ("'%c%c' ",v[0],v[1])); + } + else { + *len = n; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("buffer overflow\n")); + return(2); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("\n")); + *len = n; + return(0); +} + + +/* + * Read the contents of the VPD EEPROM and copy it to the + * VPD buffer if not already done. Search for the VPD keyword + * 'key' and copy its value to 'buf'. Add a terminating '\0'. + * If the value does not fit into the buffer cut it after + * 'len' - 1 bytes. + * + * returns 0: success + * 1: keyword not found + * 2: value string was cut + * 3: VPD transfer timeout + * 6: fatal VPD error + */ +int VpdRead( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +const char *key, /* keyword to read (e.g. "MN") */ +char *buf, /* buffer where to copy the keyword value */ +int *len) /* buffer length */ +{ + SK_VPD_PARA *p, vp; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("VPD read %s .. ", key)); + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + *len = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD init error\n")); + return(6); + } + } + + if ((p = vpd_find_para(pAC, key, &vp)) != NULL) { + if (p->p_len > (*(unsigned *)len)-1) { + p->p_len = *len - 1; + } + SK_MEMCPY(buf, p->p_val, p->p_len); + buf[p->p_len] = '\0'; + *len = p->p_len; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, + ("%c%c%c%c.., len = %d\n", + buf[0],buf[1],buf[2],buf[3],*len)); + } + else { + *len = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, ("not found\n")); + return(1); + } + return(0); +} + + +/* + * Check whether a given key may be written + * + * returns + * SK_TRUE Yes it may be written + * SK_FALSE No it may be written + */ +SK_BOOL VpdMayWrite( +char *key) /* keyword to write (allowed values "Yx", "Vx") */ +{ + if ((*key != 'Y' && *key != 'V') || + key[1] < '0' || key[1] > 'Z' || + (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) { + + return(SK_FALSE); + } + return(SK_TRUE); +} + +/* + * Read the contents of the VPD EEPROM and copy it to the VPD + * buffer if not already done. Insert/overwrite the keyword 'key' + * in the VPD buffer. Cut the keyword value if it does not fit + * into the VPD read / write area. + * + * returns 0: success + * 2: value string was cut + * 3: VPD transfer timeout + * 4: VPD full, keyword was not written + * 5: keyword cannot be written + * 6: fatal VPD error + */ +int VpdWrite( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +const char *key, /* keyword to write (allowed values "Yx", "Vx") */ +const char *buf) /* buffer where the keyword value can be read from */ +{ + int len; /* length of the keyword to write */ + int rtv; /* return code */ + int rtv2; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, + ("VPD write %s = %s\n",key,buf)); + + if ((*key != 'Y' && *key != 'V') || + key[1] < '0' || key[1] > 'Z' || + (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) { + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("illegal key tag, keyword not written\n")); + return(5); + } + + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD init error\n")); + return(6); + } + } + + rtv = 0; + len = strlen(buf); + if (len > VPD_MAX_LEN) { + /* cut it */ + len = VPD_MAX_LEN; + rtv = 2; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("keyword too long, cut after %d bytes\n",VPD_MAX_LEN)); + } + if ((rtv2 = VpdSetupPara(pAC, key, buf, len, VPD_RW_KEY, OWR_KEY)) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD write error\n")); + return(rtv2); + } + + return(rtv); +} + +/* + * Read the contents of the VPD EEPROM and copy it to the + * VPD buffer if not already done. Remove the VPD keyword + * 'key' from the VPD buffer. + * Only the keywords in the read/write area can be deleted. + * Keywords in the read only area cannot be deleted. + * + * returns 0: success, keyword was removed + * 1: keyword not found + * 5: keyword cannot be deleted + * 6: fatal VPD error + */ +int VpdDelete( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +char *key) /* keyword to read (e.g. "MN") */ +{ + SK_VPD_PARA *p, vp; + char *etp; + int vpd_size; + + vpd_size = pAC->vpd.vpd_size; + + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_TX,("VPD delete key %s\n",key)); + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD init error\n")); + return(6); + } + } + + if ((p = vpd_find_para(pAC, key, &vp)) != NULL) { + if (p->p_val < pAC->vpd.vpd_buf + vpd_size/2) { + /* try to delete read only keyword */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("cannot delete RO keyword\n")); + return(5); + } + + etp = pAC->vpd.vpd_buf + (vpd_size-pAC->vpd.v.vpd_free_rw-1-3); + + vpd_move_para(vp.p_val+vp.p_len, etp+2, + - ((int)(vp.p_len + 3))); + if (vpd_mod_endtag(pAC, etp - vp.p_len - 3)) { + pAC->vpd.v.vpd_status &= ~VPD_VALID; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD encoding error\n")); + return(6); + } + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("keyword not found\n")); + return(1); + } + + return(0); +} + +/* + * If the VPD buffer contains valid data write the VPD + * read/write area back to the VPD EEPROM. + * + * returns 0: success + * 3: VPD transfer timeout + */ +int VpdUpdate( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC) /* IO Context */ +{ + int vpd_size; + + vpd_size = pAC->vpd.vpd_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("VPD update .. ")); + if ((pAC->vpd.v.vpd_status & VPD_VALID) != 0) { + if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf + vpd_size/2, + vpd_size/2, vpd_size/2, VPD_WRITE) != vpd_size/2) { + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("transfer timed out\n")); + return(3); + } + } + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("done\n")); + return(0); +} + diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c new file mode 100644 index 00000000000..b4e75022a65 --- /dev/null +++ b/drivers/net/sk98lin/skxmac2.c @@ -0,0 +1,4160 @@ +/****************************************************************************** + * + * Name: skxmac2.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.102 $ + * Date: $Date: 2003/10/02 16:53:58 $ + * Purpose: Contains functions to initialize the MACs and PHYs + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* typedefs *******************************************************************/ + +/* BCOM PHY magic pattern list */ +typedef struct s_PhyHack { + int PhyReg; /* Phy register */ + SK_U16 PhyVal; /* Value to write */ +} BCOM_HACK; + +/* local variables ************************************************************/ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skxmac2.c,v 1.102 2003/10/02 16:53:58 rschmidt Exp $ (C) Marvell."; +#endif + +#ifdef GENESIS +static BCOM_HACK BcomRegA1Hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 }, + { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 }, + { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, + { 0, 0 } +}; +static BCOM_HACK BcomRegC0Hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 }, + { 0x15, 0x0A04 }, { 0x18, 0x0420 }, + { 0, 0 } +}; +#endif + +/* function prototypes ********************************************************/ +#ifdef GENESIS +static void SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int); +static int SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int); +#endif /* GENESIS */ +#ifdef YUKON +static void SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int); +#endif /* YUKON */ +#ifdef OTHER_PHY +static void SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL); +static int SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int); +static int SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int); +#endif /* OTHER_PHY */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmPhyRead() - Read from XMAC PHY register + * + * Description: reads a 16-bit word from XMAC PHY or ext. PHY + * + * Returns: + * nothing + */ +void SkXmPhyRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 SK_FAR *pVal) /* Pointer to Value */ +{ + SK_U16 Mmu; + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + /* write the PHY register's address */ + XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); + + /* get the PHY register's value */ + XM_IN16(IoC, Port, XM_PHY_DATA, pVal); + + if (pPrt->PhyType != SK_PHY_XMAC) { + do { + XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); + /* wait until 'Ready' is set */ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); + + /* get the PHY register's value */ + XM_IN16(IoC, Port, XM_PHY_DATA, pVal); + } +} /* SkXmPhyRead */ + + +/****************************************************************************** + * + * SkXmPhyWrite() - Write to XMAC PHY register + * + * Description: writes a 16-bit word to XMAC PHY or ext. PHY + * + * Returns: + * nothing + */ +void SkXmPhyWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 Val) /* Value */ +{ + SK_U16 Mmu; + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PhyType != SK_PHY_XMAC) { + do { + XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); + /* wait until 'Busy' is cleared */ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); + } + + /* write the PHY register's address */ + XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); + + /* write the PHY register's value */ + XM_OUT16(IoC, Port, XM_PHY_DATA, Val); + + if (pPrt->PhyType != SK_PHY_XMAC) { + do { + XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); + /* wait until 'Busy' is cleared */ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); + } +} /* SkXmPhyWrite */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmPhyRead() - Read from GPHY register + * + * Description: reads a 16-bit word from GPHY through MDIO + * + * Returns: + * nothing + */ +void SkGmPhyRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 SK_FAR *pVal) /* Pointer to Value */ +{ + SK_U16 Ctrl; + SK_GEPORT *pPrt; +#ifdef VCPU + u_long SimCyle; + u_long SimLowTime; + + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n", + PhyReg, SimCyle, SimLowTime); +#endif /* VCPU */ + + pPrt = &pAC->GIni.GP[Port]; + + /* set PHY-Register offset and 'Read' OpCode (= 1) */ + *pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | + GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD); + + GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal); + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* additional check for MDC/MDIO activity */ + if ((Ctrl & GM_SMI_CT_BUSY) == 0) { + *pVal = 0; + return; + } + + *pVal |= GM_SMI_CT_BUSY; + + do { +#ifdef VCPU + VCPUwaitTime(1000); +#endif /* VCPU */ + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* wait until 'ReadValid' is set */ + } while (Ctrl == *pVal); + + /* get the PHY register's value */ + GM_IN16(IoC, Port, GM_SMI_DATA, pVal); + +#ifdef VCPU + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", + SimCyle, SimLowTime); +#endif /* VCPU */ + +} /* SkGmPhyRead */ + + +/****************************************************************************** + * + * SkGmPhyWrite() - Write to GPHY register + * + * Description: writes a 16-bit word to GPHY through MDIO + * + * Returns: + * nothing + */ +void SkGmPhyWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 Val) /* Value */ +{ + SK_U16 Ctrl; + SK_GEPORT *pPrt; +#ifdef VCPU + SK_U32 DWord; + u_long SimCyle; + u_long SimLowTime; + + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n", + PhyReg, Val, SimCyle, SimLowTime); +#endif /* VCPU */ + + pPrt = &pAC->GIni.GP[Port]; + + /* write the PHY register's value */ + GM_OUT16(IoC, Port, GM_SMI_DATA, Val); + + /* set PHY-Register offset and 'Write' OpCode (= 0) */ + Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg); + + GM_OUT16(IoC, Port, GM_SMI_CTRL, Val); + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* additional check for MDC/MDIO activity */ + if ((Ctrl & GM_SMI_CT_BUSY) == 0) { + return; + } + + Val |= GM_SMI_CT_BUSY; + + do { +#ifdef VCPU + /* read Timer value */ + SK_IN32(IoC, B2_TI_VAL, &DWord); + + VCPUwaitTime(1000); +#endif /* VCPU */ + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* wait until 'Busy' is cleared */ + } while (Ctrl == Val); + +#ifdef VCPU + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", + SimCyle, SimLowTime); +#endif /* VCPU */ + +} /* SkGmPhyWrite */ +#endif /* YUKON */ + + +#ifdef SK_DIAG +/****************************************************************************** + * + * SkGePhyRead() - Read from PHY register + * + * Description: calls a read PHY routine dep. on board type + * + * Returns: + * nothing + */ +void SkGePhyRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 *pVal) /* Pointer to Value */ +{ + void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal); + + if (pAC->GIni.GIGenesis) { + r_func = SkXmPhyRead; + } + else { + r_func = SkGmPhyRead; + } + + r_func(pAC, IoC, Port, PhyReg, pVal); +} /* SkGePhyRead */ + + +/****************************************************************************** + * + * SkGePhyWrite() - Write to PHY register + * + * Description: calls a write PHY routine dep. on board type + * + * Returns: + * nothing + */ +void SkGePhyWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 Val) /* Value */ +{ + void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val); + + if (pAC->GIni.GIGenesis) { + w_func = SkXmPhyWrite; + } + else { + w_func = SkGmPhyWrite; + } + + w_func(pAC, IoC, Port, PhyReg, Val); +} /* SkGePhyWrite */ +#endif /* SK_DIAG */ + + +/****************************************************************************** + * + * SkMacPromiscMode() - Enable / Disable Promiscuous Mode + * + * Description: + * enables / disables promiscuous mode by setting Mode Register (XMAC) or + * Receive Control Register (GMAC) dep. on board type + * + * Returns: + * nothing + */ +void SkMacPromiscMode( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ +#ifdef YUKON + SK_U16 RcReg; +#endif +#ifdef GENESIS + SK_U32 MdReg; +#endif + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + /* enable or disable promiscuous mode */ + if (Enable) { + MdReg |= XM_MD_ENA_PROM; + } + else { + MdReg &= ~XM_MD_ENA_PROM; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); + + /* enable or disable unicast and multicast filtering */ + if (Enable) { + RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + } + else { + RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + } + /* setup Receive Control Register */ + GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg); + } +#endif /* YUKON */ + +} /* SkMacPromiscMode*/ + + +/****************************************************************************** + * + * SkMacHashing() - Enable / Disable Hashing + * + * Description: + * enables / disables hashing by setting Mode Register (XMAC) or + * Receive Control Register (GMAC) dep. on board type + * + * Returns: + * nothing + */ +void SkMacHashing( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ +#ifdef YUKON + SK_U16 RcReg; +#endif +#ifdef GENESIS + SK_U32 MdReg; +#endif + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + /* enable or disable hashing */ + if (Enable) { + MdReg |= XM_MD_ENA_HASH; + } + else { + MdReg &= ~XM_MD_ENA_HASH; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); + + /* enable or disable multicast filtering */ + if (Enable) { + RcReg |= GM_RXCR_MCF_ENA; + } + else { + RcReg &= ~GM_RXCR_MCF_ENA; + } + /* setup Receive Control Register */ + GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg); + } +#endif /* YUKON */ + +} /* SkMacHashing*/ + + +#ifdef SK_DIAG +/****************************************************************************** + * + * SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register + * + * Description: + * The features + * - FCS stripping, SK_STRIP_FCS_ON/OFF + * - pad byte stripping, SK_STRIP_PAD_ON/OFF + * - don't set XMR_FS_ERR in status SK_LENERR_OK_ON/OFF + * for inrange length error frames + * - don't set XMR_FS_ERR in status SK_BIG_PK_OK_ON/OFF + * for frames > 1514 bytes + * - enable Rx of own packets SK_SELF_RX_ON/OFF + * + * for incoming packets may be enabled/disabled by this function. + * Additional modes may be added later. + * Multiple modes can be enabled/disabled at the same time. + * The new configuration is written to the Rx Command register immediately. + * + * Returns: + * nothing + */ +static void SkXmSetRxCmd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, + SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */ +{ + SK_U16 OldRxCmd; + SK_U16 RxCmd; + + XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd); + + RxCmd = OldRxCmd; + + switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) { + case SK_STRIP_FCS_ON: + RxCmd |= XM_RX_STRIP_FCS; + break; + case SK_STRIP_FCS_OFF: + RxCmd &= ~XM_RX_STRIP_FCS; + break; + } + + switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) { + case SK_STRIP_PAD_ON: + RxCmd |= XM_RX_STRIP_PAD; + break; + case SK_STRIP_PAD_OFF: + RxCmd &= ~XM_RX_STRIP_PAD; + break; + } + + switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) { + case SK_LENERR_OK_ON: + RxCmd |= XM_RX_LENERR_OK; + break; + case SK_LENERR_OK_OFF: + RxCmd &= ~XM_RX_LENERR_OK; + break; + } + + switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) { + case SK_BIG_PK_OK_ON: + RxCmd |= XM_RX_BIG_PK_OK; + break; + case SK_BIG_PK_OK_OFF: + RxCmd &= ~XM_RX_BIG_PK_OK; + break; + } + + switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) { + case SK_SELF_RX_ON: + RxCmd |= XM_RX_SELF_RX; + break; + case SK_SELF_RX_OFF: + RxCmd &= ~XM_RX_SELF_RX; + break; + } + + /* Write the new mode to the Rx command register if required */ + if (OldRxCmd != RxCmd) { + XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd); + } +} /* SkXmSetRxCmd */ + + +/****************************************************************************** + * + * SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register + * + * Description: + * The features + * - FCS (CRC) stripping, SK_STRIP_FCS_ON/OFF + * - don't set GMR_FS_LONG_ERR SK_BIG_PK_OK_ON/OFF + * for frames > 1514 bytes + * - enable Rx of own packets SK_SELF_RX_ON/OFF + * + * for incoming packets may be enabled/disabled by this function. + * Additional modes may be added later. + * Multiple modes can be enabled/disabled at the same time. + * The new configuration is written to the Rx Command register immediately. + * + * Returns: + * nothing + */ +static void SkGmSetRxCmd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, + SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */ +{ + SK_U16 OldRxCmd; + SK_U16 RxCmd; + + if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) { + + GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd); + + RxCmd = OldRxCmd; + + if ((Mode & SK_STRIP_FCS_ON) != 0) { + RxCmd |= GM_RXCR_CRC_DIS; + } + else { + RxCmd &= ~GM_RXCR_CRC_DIS; + } + /* Write the new mode to the Rx control register if required */ + if (OldRxCmd != RxCmd) { + GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd); + } + } + + if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) { + + GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd); + + RxCmd = OldRxCmd; + + if ((Mode & SK_BIG_PK_OK_ON) != 0) { + RxCmd |= GM_SMOD_JUMBO_ENA; + } + else { + RxCmd &= ~GM_SMOD_JUMBO_ENA; + } + /* Write the new mode to the Rx control register if required */ + if (OldRxCmd != RxCmd) { + GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd); + } + } +} /* SkGmSetRxCmd */ + + +/****************************************************************************** + * + * SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register + * + * Description: modifies the MAC's Rx Control reg. dep. on board type + * + * Returns: + * nothing + */ +void SkMacSetRxCmd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int Mode) /* Rx Mode */ +{ + if (pAC->GIni.GIGenesis) { + + SkXmSetRxCmd(pAC, IoC, Port, Mode); + } + else { + + SkGmSetRxCmd(pAC, IoC, Port, Mode); + } + +} /* SkMacSetRxCmd */ + + +/****************************************************************************** + * + * SkMacCrcGener() - Enable / Disable CRC Generation + * + * Description: enables / disables CRC generation dep. on board type + * + * Returns: + * nothing + */ +void SkMacCrcGener( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ + SK_U16 Word; + + if (pAC->GIni.GIGenesis) { + + XM_IN16(IoC, Port, XM_TX_CMD, &Word); + + if (Enable) { + Word &= ~XM_TX_NO_CRC; + } + else { + Word |= XM_TX_NO_CRC; + } + /* setup Tx Command Register */ + XM_OUT16(IoC, Port, XM_TX_CMD, Word); + } + else { + + GM_IN16(IoC, Port, GM_TX_CTRL, &Word); + + if (Enable) { + Word &= ~GM_TXCR_CRC_DIS; + } + else { + Word |= GM_TXCR_CRC_DIS; + } + /* setup Tx Control Register */ + GM_OUT16(IoC, Port, GM_TX_CTRL, Word); + } + +} /* SkMacCrcGener*/ + +#endif /* SK_DIAG */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmClrExactAddr() - Clear Exact Match Address Registers + * + * Description: + * All Exact Match Address registers of the XMAC 'Port' will be + * cleared starting with 'StartNum' up to (and including) the + * Exact Match address number of 'StopNum'. + * + * Returns: + * nothing + */ +void SkXmClrExactAddr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int StartNum, /* Begin with this Address Register Index (0..15) */ +int StopNum) /* Stop after finished with this Register Idx (0..15) */ +{ + int i; + SK_U16 ZeroAddr[3] = {0x0000, 0x0000, 0x0000}; + + if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 || + StartNum > StopNum) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG); + return; + } + + for (i = StartNum; i <= StopNum; i++) { + XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]); + } +} /* SkXmClrExactAddr */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkMacFlushTxFifo() - Flush the MAC's transmit FIFO + * + * Description: + * Flush the transmit FIFO of the MAC specified by the index 'Port' + * + * Returns: + * nothing + */ +void SkMacFlushTxFifo( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +#ifdef GENESIS + SK_U32 MdReg; + + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* no way to flush the FIFO we have to issue a reset */ + /* TBD */ + } +#endif /* YUKON */ + +} /* SkMacFlushTxFifo */ + + +/****************************************************************************** + * + * SkMacFlushRxFifo() - Flush the MAC's receive FIFO + * + * Description: + * Flush the receive FIFO of the MAC specified by the index 'Port' + * + * Returns: + * nothing + */ +static void SkMacFlushRxFifo( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +#ifdef GENESIS + SK_U32 MdReg; + + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* no way to flush the FIFO we have to issue a reset */ + /* TBD */ + } +#endif /* YUKON */ + +} /* SkMacFlushRxFifo */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmSoftRst() - Do a XMAC software reset + * + * Description: + * The PHY registers should not be destroyed during this + * kind of software reset. Therefore the XMAC Software Reset + * (XM_GP_RES_MAC bit in XM_GP_PORT) must not be used! + * + * The software reset is done by + * - disabling the Rx and Tx state machine, + * - resetting the statistics module, + * - clear all other significant XMAC Mode, + * Command, and Control Registers + * - clearing the Hash Register and the + * Exact Match Address registers, and + * - flushing the XMAC's Rx and Tx FIFOs. + * + * Note: + * Another requirement when stopping the XMAC is to + * avoid sending corrupted frames on the network. + * Disabling the Tx state machine will NOT interrupt + * the currently transmitted frame. But we must take care + * that the Tx FIFO is cleared AFTER the current frame + * is complete sent to the network. + * + * It takes about 12ns to send a frame with 1538 bytes. + * One PCI clock goes at least 15ns (66MHz). Therefore + * after reading XM_GP_PORT back, we are sure that the + * transmitter is disabled AND idle. And this means + * we may flush the transmit FIFO now. + * + * Returns: + * nothing + */ +static void SkXmSoftRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000}; + + /* reset the statistics module */ + XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT); + + /* disable all XMAC IRQs */ + XM_OUT16(IoC, Port, XM_IMSK, 0xffff); + + XM_OUT32(IoC, Port, XM_MODE, 0); /* clear Mode Reg */ + + XM_OUT16(IoC, Port, XM_TX_CMD, 0); /* reset TX CMD Reg */ + XM_OUT16(IoC, Port, XM_RX_CMD, 0); /* reset RX CMD Reg */ + + /* disable all PHY IRQs */ + switch (pAC->GIni.GP[Port].PhyType) { + case SK_PHY_BCOM: + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0); + break; + case SK_PHY_NAT: + /* todo: National + SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */ + break; +#endif /* OTHER_PHY */ + } + + /* clear the Hash Register */ + XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr); + + /* clear the Exact Match Address registers */ + SkXmClrExactAddr(pAC, IoC, Port, 0, 15); + + /* clear the Source Check Address registers */ + XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr); + +} /* SkXmSoftRst */ + + +/****************************************************************************** + * + * SkXmHardRst() - Do a XMAC hardware reset + * + * Description: + * The XMAC of the specified 'Port' and all connected devices + * (PHY and SERDES) will receive a reset signal on its *Reset pins. + * External PHYs must be reset by clearing a bit in the GPIO register + * (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns). + * + * ATTENTION: + * It is absolutely necessary to reset the SW_RST Bit first + * before calling this function. + * + * Returns: + * nothing + */ +static void SkXmHardRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 Reg; + int i; + int TOut; + SK_U16 Word; + + for (i = 0; i < 4; i++) { + /* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */ + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + + TOut = 0; + do { + if (TOut++ > 10000) { + /* + * Adapter seems to be in RESET state. + * Registers cannot be written. + */ + return; + } + + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST); + + SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word); + + } while ((Word & MFF_SET_MAC_RST) == 0); + } + + /* For external PHYs there must be special handling */ + if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) { + + SK_IN32(IoC, B2_GP_IO, &Reg); + + if (Port == 0) { + Reg |= GP_DIR_0; /* set to output */ + Reg &= ~GP_IO_0; /* set PHY reset (active low) */ + } + else { + Reg |= GP_DIR_2; /* set to output */ + Reg &= ~GP_IO_2; /* set PHY reset (active low) */ + } + /* reset external PHY */ + SK_OUT32(IoC, B2_GP_IO, Reg); + + /* short delay */ + SK_IN32(IoC, B2_GP_IO, &Reg); + } +} /* SkXmHardRst */ + + +/****************************************************************************** + * + * SkXmClearRst() - Release the PHY & XMAC reset + * + * Description: + * + * Returns: + * nothing + */ +static void SkXmClearRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 DWord; + + /* clear HW reset */ + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + + if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) { + + SK_IN32(IoC, B2_GP_IO, &DWord); + + if (Port == 0) { + DWord |= (GP_DIR_0 | GP_IO_0); /* set to output */ + } + else { + DWord |= (GP_DIR_2 | GP_IO_2); /* set to output */ + } + /* Clear PHY reset */ + SK_OUT32(IoC, B2_GP_IO, DWord); + + /* Enable GMII interface */ + XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD); + } +} /* SkXmClearRst */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmSoftRst() - Do a GMAC software reset + * + * Description: + * The GPHY registers should not be destroyed during this + * kind of software reset. + * + * Returns: + * nothing + */ +static void SkGmSoftRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000}; + SK_U16 RxCtrl; + + /* reset the statistics module */ + + /* disable all GMAC IRQs */ + SK_OUT8(IoC, GMAC_IRQ_MSK, 0); + + /* disable all PHY IRQs */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); + + /* clear the Hash Register */ + GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash); + + /* Enable Unicast and Multicast filtering */ + GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl); + + GM_OUT16(IoC, Port, GM_RX_CTRL, + (SK_U16)(RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)); + +} /* SkGmSoftRst */ + + +/****************************************************************************** + * + * SkGmHardRst() - Do a GMAC hardware reset + * + * Description: + * + * Returns: + * nothing + */ +static void SkGmHardRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 DWord; + + /* WA code for COMA mode */ + if (pAC->GIni.GIYukonLite && + pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { + + SK_IN32(IoC, B2_GP_IO, &DWord); + + DWord |= (GP_DIR_9 | GP_IO_9); + + /* set PHY reset */ + SK_OUT32(IoC, B2_GP_IO, DWord); + } + + /* set GPHY Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET); + + /* set GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET); + +} /* SkGmHardRst */ + + +/****************************************************************************** + * + * SkGmClearRst() - Release the GPHY & GMAC reset + * + * Description: + * + * Returns: + * nothing + */ +static void SkGmClearRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 DWord; + +#ifdef XXX + /* clear GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR); + + /* set GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET); +#endif /* XXX */ + + /* WA code for COMA mode */ + if (pAC->GIni.GIYukonLite && + pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { + + SK_IN32(IoC, B2_GP_IO, &DWord); + + DWord |= GP_DIR_9; /* set to output */ + DWord &= ~GP_IO_9; /* clear PHY reset (active high) */ + + /* clear PHY reset */ + SK_OUT32(IoC, B2_GP_IO, DWord); + } + + /* set HWCFG_MODE */ + DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP | + GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE | + (pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP : + GPC_HWCFG_GMII_FIB); + + /* set GPHY Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET); + + /* release GPHY Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR); + +#ifdef VCPU + VCpuWait(9000); +#endif /* VCPU */ + + /* clear GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); + +#ifdef VCPU + VCpuWait(2000); + + SK_IN32(IoC, MR_ADDR(Port, GPHY_CTRL), &DWord); + + SK_IN32(IoC, B0_ISRC, &DWord); +#endif /* VCPU */ + +} /* SkGmClearRst */ +#endif /* YUKON */ + + +/****************************************************************************** + * + * SkMacSoftRst() - Do a MAC software reset + * + * Description: calls a MAC software reset routine dep. on board type + * + * Returns: + * nothing + */ +void SkMacSoftRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + /* disable receiver and transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SkXmSoftRst(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmSoftRst(pAC, IoC, Port); + } +#endif /* YUKON */ + + /* flush the MAC's Rx and Tx FIFOs */ + SkMacFlushTxFifo(pAC, IoC, Port); + + SkMacFlushRxFifo(pAC, IoC, Port); + + pPrt->PState = SK_PRT_STOP; + +} /* SkMacSoftRst */ + + +/****************************************************************************** + * + * SkMacHardRst() - Do a MAC hardware reset + * + * Description: calls a MAC hardware reset routine dep. on board type + * + * Returns: + * nothing + */ +void SkMacHardRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SkXmHardRst(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmHardRst(pAC, IoC, Port); + } +#endif /* YUKON */ + + pAC->GIni.GP[Port].PState = SK_PRT_RESET; + +} /* SkMacHardRst */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmInitMac() - Initialize the XMAC II + * + * Description: + * Initialize the XMAC of the specified port. + * The XMAC must be reset or stopped before calling this function. + * + * Note: + * The XMAC's Rx and Tx state machine is still disabled when returning. + * + * Returns: + * nothing + */ +void SkXmInitMac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int i; + SK_U16 SWord; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PState == SK_PRT_STOP) { + /* Port State: SK_PRT_STOP */ + /* Verify that the reset bit is cleared */ + SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord); + + if ((SWord & MFF_SET_MAC_RST) != 0) { + /* PState does not match HW state */ + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); + /* Correct it */ + pPrt->PState = SK_PRT_RESET; + } + } + + if (pPrt->PState == SK_PRT_RESET) { + + SkXmClearRst(pAC, IoC, Port); + + if (pPrt->PhyType != SK_PHY_XMAC) { + /* read Id from external PHY (all have the same address) */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1); + + /* + * Optimize MDIO transfer by suppressing preamble. + * Must be done AFTER first access to BCOM chip. + */ + XM_IN16(IoC, Port, XM_MMU_CMD, &SWord); + + XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE); + + if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) { + /* + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. + */ + i = 0; + while (BcomRegC0Hack[i].PhyReg != 0) { + SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg, + BcomRegC0Hack[i].PhyVal); + i++; + } + } + else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) { + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + i = 0; + while (BcomRegA1Hack[i].PhyReg != 0) { + SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg, + BcomRegA1Hack[i].PhyVal); + i++; + } + } + + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); + + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, + (SK_U16)(SWord | PHY_B_AC_DIS_PM)); + + /* PHY LED initialization is done in SkGeXmitLED() */ + } + + /* Dummy read the Interrupt source register */ + XM_IN16(IoC, Port, XM_ISRC, &SWord); + + /* + * The auto-negotiation process starts immediately after + * clearing the reset. The auto-negotiation process should be + * started by the SIRQ, therefore stop it here immediately. + */ + SkMacInitPhy(pAC, IoC, Port, SK_FALSE); + +#ifdef TEST_ONLY + /* temp. code: enable signal detect */ + /* WARNING: do not override GMII setting above */ + XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_COM4SIG); +#endif + } + + /* + * configure the XMACs Station Address + * B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A + * B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B + */ + for (i = 0; i < 3; i++) { + /* + * The following 2 statements are together endianess + * independent. Remember this when changing. + */ + SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); + + XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord); + } + + /* Tx Inter Packet Gap (XM_TX_IPG): use default */ + /* Tx High Water Mark (XM_TX_HI_WM): use default */ + /* Tx Low Water Mark (XM_TX_LO_WM): use default */ + /* Host Request Threshold (XM_HT_THR): use default */ + /* Rx Request Threshold (XM_RX_THR): use default */ + /* Rx Low Water Mark (XM_RX_LO_WM): use default */ + + /* configure Rx High Water Mark (XM_RX_HI_WM) */ + XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM); + + /* Configure Tx Request Threshold */ + SWord = SK_XM_THR_SL; /* for single port */ + + if (pAC->GIni.GIMacsFound > 1) { + switch (pAC->GIni.GIPortUsage) { + case SK_RED_LINK: + SWord = SK_XM_THR_REDL; /* redundant link */ + break; + case SK_MUL_LINK: + SWord = SK_XM_THR_MULL; /* load balancing */ + break; + case SK_JUMBO_LINK: + SWord = SK_XM_THR_JUMBO; /* jumbo frames */ + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG); + break; + } + } + XM_OUT16(IoC, Port, XM_TX_THR, SWord); + + /* setup register defaults for the Tx Command Register */ + XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD); + + /* setup register defaults for the Rx Command Register */ + SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK; + + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + SWord |= XM_RX_BIG_PK_OK; + } + + if (pPrt->PLinkMode == SK_LMODE_HALF) { + /* + * If in manual half duplex mode the other side might be in + * full duplex mode, so ignore if a carrier extension is not seen + * on frames received + */ + SWord |= XM_RX_DIS_CEXT; + } + + XM_OUT16(IoC, Port, XM_RX_CMD, SWord); + + /* + * setup register defaults for the Mode Register + * - Don't strip error frames to avoid Store & Forward + * on the Rx side. + * - Enable 'Check Station Address' bit + * - Enable 'Check Address Array' bit + */ + XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE); + + /* + * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK) + * - Enable all bits excepting 'Octets Rx OK Low CntOv' + * and 'Octets Rx OK Hi Cnt Ov'. + */ + XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK); + + /* + * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK) + * - Enable all bits excepting 'Octets Tx OK Low CntOv' + * and 'Octets Tx OK Hi Cnt Ov'. + */ + XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK); + + /* + * Do NOT init XMAC interrupt mask here. + * All interrupts remain disable until link comes up! + */ + + /* + * Any additional configuration changes may be done now. + * The last action is to enable the Rx and Tx state machine. + * This should be done after the auto-negotiation process + * has been completed successfully. + */ +} /* SkXmInitMac */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmInitMac() - Initialize the GMAC + * + * Description: + * Initialize the GMAC of the specified port. + * The GMAC must be reset or stopped before calling this function. + * + * Note: + * The GMAC's Rx and Tx state machine is still disabled when returning. + * + * Returns: + * nothing + */ +void SkGmInitMac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int i; + SK_U16 SWord; + SK_U32 DWord; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PState == SK_PRT_STOP) { + /* Port State: SK_PRT_STOP */ + /* Verify that the reset bit is cleared */ + SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord); + + if ((DWord & GMC_RST_SET) != 0) { + /* PState does not match HW state */ + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); + /* Correct it */ + pPrt->PState = SK_PRT_RESET; + } + } + + if (pPrt->PState == SK_PRT_RESET) { + + SkGmHardRst(pAC, IoC, Port); + + SkGmClearRst(pAC, IoC, Port); + + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + /* Auto-negotiation disabled */ + + /* get General Purpose Control */ + GM_IN16(IoC, Port, GM_GP_CTRL, &SWord); + + /* disable auto-update for speed, duplex and flow-control */ + SWord |= GM_GPCR_AU_ALL_DIS; + + /* setup General Purpose Control Register */ + GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); + + SWord = GM_GPCR_AU_ALL_DIS; + } + else { + SWord = 0; + } + + /* speed settings */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + case SK_LSPEED_1000MBPS: + SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100; + break; + case SK_LSPEED_100MBPS: + SWord |= GM_GPCR_SPEED_100; + break; + case SK_LSPEED_10MBPS: + break; + } + + /* duplex settings */ + if (pPrt->PLinkMode != SK_LMODE_HALF) { + /* set full duplex */ + SWord |= GM_GPCR_DUP_FULL; + } + + /* flow-control settings */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + /* set Pause Off */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_OFF); + /* disable Tx & Rx flow-control */ + SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case SK_FLOW_MODE_LOC_SEND: + /* disable Rx flow-control */ + SWord |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case SK_FLOW_MODE_SYMMETRIC: + case SK_FLOW_MODE_SYM_OR_REM: + /* enable Tx & Rx flow-control */ + break; + } + + /* setup General Purpose Control Register */ + GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); + + /* dummy read the Interrupt Source Register */ + SK_IN16(IoC, GMAC_IRQ_SRC, &SWord); + +#ifndef VCPU + /* read Id from PHY */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1); + + SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE); +#endif /* VCPU */ + } + + (void)SkGmResetCounter(pAC, IoC, Port); + + /* setup Transmit Control Register */ + GM_OUT16(IoC, Port, GM_TX_CTRL, TX_COL_THR(pPrt->PMacColThres)); + + /* setup Receive Control Register */ + GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA | + GM_RXCR_CRC_DIS); + + /* setup Transmit Flow Control Register */ + GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff); + + /* setup Transmit Parameter Register */ +#ifdef VCPU + GM_IN16(IoC, Port, GM_TX_PARAM, &SWord); +#endif /* VCPU */ + + SWord = TX_JAM_LEN_VAL(pPrt->PMacJamLen) | + TX_JAM_IPG_VAL(pPrt->PMacJamIpgVal) | + TX_IPG_JAM_DATA(pPrt->PMacJamIpgData); + + GM_OUT16(IoC, Port, GM_TX_PARAM, SWord); + + /* configure the Serial Mode Register */ +#ifdef VCPU + GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord); +#endif /* VCPU */ + + SWord = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(pPrt->PMacIpgData); + + if (pPrt->PMacLimit4) { + /* reset of collision counter after 4 consecutive collisions */ + SWord |= GM_SMOD_LIMIT_4; + } + + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + /* enable jumbo mode (Max. Frame Length = 9018) */ + SWord |= GM_SMOD_JUMBO_ENA; + } + + GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord); + + /* + * configure the GMACs Station Addresses + * in PROM you can find our addresses at: + * B2_MAC_1 = xx xx xx xx xx x0 virtual address + * B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A + * B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort + */ + + for (i = 0; i < 3; i++) { + /* + * The following 2 statements are together endianess + * independent. Remember this when changing. + */ + /* physical address: will be used for pause frames */ + SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); + +#ifdef WA_DEV_16 + /* WA for deviation #16 */ + if (pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) { + /* swap the address bytes */ + SWord = ((SWord & 0xff00) >> 8) | ((SWord & 0x00ff) << 8); + + /* write to register in reversed order */ + GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord); + } + else { + GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); + } +#else + GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); +#endif /* WA_DEV_16 */ + + /* virtual address: will be used for data */ + SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord); + + GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord); + + /* reset Multicast filtering Hash registers 1-3 */ + GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0); + } + + /* reset Multicast filtering Hash register 4 */ + GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0); + + /* enable interrupt mask for counter overflows */ + GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0); + GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0); + GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0); + +#if defined(SK_DIAG) || defined(DEBUG) + /* read General Purpose Status */ + GM_IN16(IoC, Port, GM_GP_STAT, &SWord); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("MAC Stat Reg.=0x%04X\n", SWord)); +#endif /* SK_DIAG || DEBUG */ + +#ifdef SK_DIAG + c_print("MAC Stat Reg=0x%04X\n", SWord); +#endif /* SK_DIAG */ + +} /* SkGmInitMac */ +#endif /* YUKON */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmInitDupMd() - Initialize the XMACs Duplex Mode + * + * Description: + * This function initializes the XMACs Duplex Mode. + * It should be called after successfully finishing + * the Auto-negotiation Process + * + * Returns: + * nothing + */ +static void SkXmInitDupMd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + switch (pAC->GIni.GP[Port].PLinkModeStatus) { + case SK_LMODE_STAT_AUTOHALF: + case SK_LMODE_STAT_HALF: + /* Configuration Actions for Half Duplex Mode */ + /* + * XM_BURST = default value. We are probable not quick + * enough at the 'XMAC' bus to burst 8kB. + * The XMAC stops bursting if no transmit frames + * are available or the burst limit is exceeded. + */ + /* XM_TX_RT_LIM = default value (15) */ + /* XM_TX_STIME = default value (0xff = 4096 bit times) */ + break; + case SK_LMODE_STAT_AUTOFULL: + case SK_LMODE_STAT_FULL: + /* Configuration Actions for Full Duplex Mode */ + /* + * The duplex mode is configured by the PHY, + * therefore it seems to be that there is nothing + * to do here. + */ + break; + case SK_LMODE_STAT_UNKNOWN: + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG); + break; + } +} /* SkXmInitDupMd */ + + +/****************************************************************************** + * + * SkXmInitPauseMd() - initialize the Pause Mode to be used for this port + * + * Description: + * This function initializes the Pause Mode which should + * be used for this port. + * It should be called after successfully finishing + * the Auto-negotiation Process + * + * Returns: + * nothing + */ +static void SkXmInitPauseMd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U32 DWord; + SK_U16 Word; + + pPrt = &pAC->GIni.GP[Port]; + + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); + + if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE || + pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { + + /* Disable Pause Frame Reception */ + Word |= XM_MMU_IGN_PF; + } + else { + /* + * enabling pause frame reception is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + /* Enable Pause Frame Reception */ + Word &= ~XM_MMU_IGN_PF; + } + + XM_OUT16(IoC, Port, XM_MMU_CMD, Word); + + XM_IN32(IoC, Port, XM_MODE, &DWord); + + if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC || + pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { + + /* + * Configure Pause Frame Generation + * Use internal and external Pause Frame Generation. + * Sending pause frames is edge triggered. + * Send a Pause frame with the maximum pause time if + * internal oder external FIFO full condition occurs. + * Send a zero pause time frame to re-start transmission. + */ + + /* XM_PAUSE_DA = '010000C28001' (default) */ + + /* XM_MAC_PTIME = 0xffff (maximum) */ + /* remember this value is defined in big endian (!) */ + XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff); + + /* Set Pause Mode in Mode Register */ + DWord |= XM_PAUSE_MODE; + + /* Set Pause Mode in MAC Rx FIFO */ + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE); + } + else { + /* + * disable pause frame generation is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + /* Disable Pause Mode in Mode Register */ + DWord &= ~XM_PAUSE_MODE; + + /* Disable Pause Mode in MAC Rx FIFO */ + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE); + } + + XM_OUT32(IoC, Port, XM_MODE, DWord); +} /* SkXmInitPauseMd*/ + + +/****************************************************************************** + * + * SkXmInitPhyXmac() - Initialize the XMAC Phy registers + * + * Description: initializes all the XMACs Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyXmac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 Ctrl; + + pPrt = &pAC->GIni.GP[Port]; + Ctrl = 0; + + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyXmac: no auto-negotiation Port %d\n", Port)); + /* Set DuplexMode in Config register */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + Ctrl |= PHY_CT_DUP_MD; + } + + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLEs are transmitted + */ + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyXmac: with auto-negotiation Port %d\n", Port)); + /* Set Auto-negotiation advertisement */ + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + Ctrl |= PHY_X_AN_HD; + break; + case SK_LMODE_AUTOFULL: + Ctrl |= PHY_X_AN_FD; + break; + case SK_LMODE_AUTOBOTH: + Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + Ctrl |= PHY_X_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + Ctrl |= PHY_X_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + Ctrl |= PHY_X_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + Ctrl |= PHY_X_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + /* Write AutoNeg Advertisement Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl); + + /* Restart Auto-negotiation */ + Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG; + } + + if (DoLoop) { + /* Set the Phy Loopback bit, too */ + Ctrl |= PHY_CT_LOOP; + } + + /* Write to the Phy control register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl); +} /* SkXmInitPhyXmac */ + + +/****************************************************************************** + * + * SkXmInitPhyBcom() - Initialize the Broadcom Phy registers + * + * Description: initializes all the Broadcom Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyBcom( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 Ctrl1; + SK_U16 Ctrl2; + SK_U16 Ctrl3; + SK_U16 Ctrl4; + SK_U16 Ctrl5; + + Ctrl1 = PHY_CT_SP1000; + Ctrl2 = 0; + Ctrl3 = PHY_SEL_TYPE; + Ctrl4 = PHY_B_PEC_EN_LTR; + Ctrl5 = PHY_B_AC_TX_TST; + + pPrt = &pAC->GIni.GP[Port]; + + /* manually Master/Slave ? */ + if (pPrt->PMSMode != SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_B_1000C_MSE; + + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { + Ctrl2 |= PHY_B_1000C_MSC; + } + } + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyBcom: no auto-negotiation Port %d\n", Port)); + /* Set DuplexMode in Config register */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + Ctrl1 |= PHY_CT_DUP_MD; + } + + /* Determine Master/Slave manually if not already done */ + if (pPrt->PMSMode == SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ + } + + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLES are transmitted + */ + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyBcom: with auto-negotiation Port %d\n", Port)); + /* Set Auto-negotiation advertisement */ + + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + Ctrl2 |= PHY_B_1000C_RD; + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + Ctrl2 |= PHY_B_1000C_AHD; + break; + case SK_LMODE_AUTOFULL: + Ctrl2 |= PHY_B_1000C_AFD; + break; + case SK_LMODE_AUTOBOTH: + Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + Ctrl3 |= PHY_B_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + Ctrl3 |= PHY_B_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + Ctrl3 |= PHY_B_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + Ctrl3 |= PHY_B_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + /* Restart Auto-negotiation */ + Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; + } + + /* Initialize LED register here? */ + /* No. Please do it in SkDgXmitLed() (if required) and swap + init order of LEDs and XMAC. (MAl) */ + + /* Write 1000Base-T Control Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set 1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); + + /* Write AutoNeg Advertisement Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3)); + + if (DoLoop) { + /* Set the Phy Loopback bit, too */ + Ctrl1 |= PHY_CT_LOOP; + } + + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + /* configure FIFO to high latency for transmission of ext. packets */ + Ctrl4 |= PHY_B_PEC_HIGH_LA; + + /* configure reception of extended packets */ + Ctrl5 |= PHY_B_AC_LONG_PACK; + + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5); + } + + /* Configure LED Traffic Mode and Jumbo Frame usage if specified */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4); + + /* Write to the Phy control register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Control Reg=0x%04X\n", Ctrl1)); +} /* SkXmInitPhyBcom */ +#endif /* GENESIS */ + +#ifdef YUKON +/****************************************************************************** + * + * SkGmInitPhyMarv() - Initialize the Marvell Phy registers + * + * Description: initializes all the Marvell Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkGmInitPhyMarv( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 PhyCtrl; + SK_U16 C1000BaseT; + SK_U16 AutoNegAdv; + SK_U16 ExtPhyCtrl; + SK_U16 LedCtrl; + SK_BOOL AutoNeg; +#if defined(SK_DIAG) || defined(DEBUG) + SK_U16 PhyStat; + SK_U16 PhyStat1; + SK_U16 PhySpecStat; +#endif /* SK_DIAG || DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + AutoNeg = SK_FALSE; + } + else { + AutoNeg = SK_TRUE; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyMarv: Port %d, auto-negotiation %s\n", + Port, AutoNeg ? "ON" : "OFF")); + +#ifdef VCPU + VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n", + Port, DoLoop); +#else /* VCPU */ + if (DoLoop) { + /* Set 'MAC Power up'-bit, set Manual MDI configuration */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, + PHY_M_PC_MAC_POW_UP); + } + else if (AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_AUTO) { + /* Read Ext. PHY Specific Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); + + ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | + PHY_M_EC_MAC_S_MSK); + + ExtPhyCtrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ) | + PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl)); + } + + /* Read PHY Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); + + if (!AutoNeg) { + /* Disable Auto-negotiation */ + PhyCtrl &= ~PHY_CT_ANE; + } + + PhyCtrl |= PHY_CT_RESET; + /* Assert software reset */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl); +#endif /* VCPU */ + + PhyCtrl = 0 /* PHY_CT_COL_TST */; + C1000BaseT = 0; + AutoNegAdv = PHY_SEL_TYPE; + + /* manually Master/Slave ? */ + if (pPrt->PMSMode != SK_MS_MODE_AUTO) { + /* enable Manual Master/Slave */ + C1000BaseT |= PHY_M_1000C_MSE; + + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { + C1000BaseT |= PHY_M_1000C_MSC; /* set it to Master */ + } + } + + /* Auto-negotiation ? */ + if (!AutoNeg) { + + if (pPrt->PLinkMode == SK_LMODE_FULL) { + /* Set Full Duplex Mode */ + PhyCtrl |= PHY_CT_DUP_MD; + } + + /* Set Master/Slave manually if not already done */ + if (pPrt->PMSMode == SK_MS_MODE_AUTO) { + C1000BaseT |= PHY_M_1000C_MSE; /* set it to Slave */ + } + + /* Set Speed */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + case SK_LSPEED_1000MBPS: + PhyCtrl |= PHY_CT_SP1000; + break; + case SK_LSPEED_100MBPS: + PhyCtrl |= PHY_CT_SP100; + break; + case SK_LSPEED_10MBPS: + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019, + SKERR_HWI_E019MSG); + } + + if (!DoLoop) { + PhyCtrl |= PHY_CT_RESET; + } + } + else { + /* Set Auto-negotiation advertisement */ + + if (pAC->GIni.GICopperType) { + /* Set Speed capabilities */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD; + AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD | + PHY_M_AN_10_FD | PHY_M_AN_10_HD; + break; + case SK_LSPEED_1000MBPS: + C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD; + break; + case SK_LSPEED_100MBPS: + AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD | + /* advertise 10Base-T also */ + PHY_M_AN_10_FD | PHY_M_AN_10_HD; + break; + case SK_LSPEED_10MBPS: + AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019, + SKERR_HWI_E019MSG); + } + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + C1000BaseT &= ~PHY_M_1000C_AFD; + AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD); + break; + case SK_LMODE_AUTOFULL: + C1000BaseT &= ~PHY_M_1000C_AHD; + AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD); + break; + case SK_LMODE_AUTOBOTH: + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + AutoNegAdv |= PHY_B_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + AutoNegAdv |= PHY_B_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + AutoNegAdv |= PHY_B_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + AutoNegAdv |= PHY_B_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + } + else { /* special defines for FIBER (88E1011S only) */ + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + AutoNegAdv |= PHY_M_AN_1000X_AHD; + break; + case SK_LMODE_AUTOFULL: + AutoNegAdv |= PHY_M_AN_1000X_AFD; + break; + case SK_LMODE_AUTOBOTH: + AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + AutoNegAdv |= PHY_M_P_NO_PAUSE_X; + break; + case SK_FLOW_MODE_LOC_SEND: + AutoNegAdv |= PHY_M_P_ASYM_MD_X; + break; + case SK_FLOW_MODE_SYMMETRIC: + AutoNegAdv |= PHY_M_P_SYM_MD_X; + break; + case SK_FLOW_MODE_SYM_OR_REM: + AutoNegAdv |= PHY_M_P_BOTH_MD_X; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + } + + if (!DoLoop) { + /* Restart Auto-negotiation */ + PhyCtrl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } + } + +#ifdef VCPU + /* + * E-mail from Gu Lin (08-03-2002): + */ + + /* Program PHY register 30 as 16'h0708 for simulation speed up */ + SkGmPhyWrite(pAC, IoC, Port, 30, 0x0700 /* 0x0708 */); + + VCpuWait(2000); + +#else /* VCPU */ + + /* Write 1000Base-T Control Register */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set 1000B-T Ctrl =0x%04X\n", C1000BaseT)); + + /* Write AutoNeg Advertisement Register */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set Auto-Neg.Adv.=0x%04X\n", AutoNegAdv)); +#endif /* VCPU */ + + if (DoLoop) { + /* Set the PHY Loopback bit */ + PhyCtrl |= PHY_CT_LOOP; + +#ifdef XXX + /* Program PHY register 16 as 16'h0400 to force link good */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD); +#endif /* XXX */ + +#ifndef VCPU + if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) { + /* Write Ext. PHY Specific Control */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, + (SK_U16)((pPrt->PLinkSpeed + 2) << 4)); + } +#endif /* VCPU */ + } +#ifdef TEST_ONLY + else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) { + /* Write PHY Specific Control */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, + PHY_M_PC_EN_DET_MSK); + } +#endif + + /* Write to the PHY Control register */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); + +#ifdef VCPU + VCpuWait(2000); +#else + + LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS); + + if ((pAC->GIni.GILedBlinkCtrl & SK_ACT_LED_BLINK) != 0) { + LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL; + } + + if ((pAC->GIni.GILedBlinkCtrl & SK_DUP_LED_NORMAL) != 0) { + LedCtrl |= PHY_M_LEDC_DP_CTRL; + } + + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl); + + if ((pAC->GIni.GILedBlinkCtrl & SK_LED_LINK100_ON) != 0) { + /* only in forced 100 Mbps mode */ + if (!AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_100MBPS) { + + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_100(MO_LED_ON)); + } + } + +#ifdef SK_DIAG + c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl); + c_print("Set 1000 B-T=0x%04X\n", C1000BaseT); + c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv); + c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl); +#endif /* SK_DIAG */ + +#if defined(SK_DIAG) || defined(DEBUG) + /* Read PHY Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); + + /* Read 1000Base-T Control Register */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("1000B-T Ctrl =0x%04X\n", C1000BaseT)); + + /* Read AutoNeg Advertisement Register */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Neg.Adv.=0x%04X\n", AutoNegAdv)); + + /* Read Ext. PHY Specific Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl)); + + /* Read PHY Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Stat Reg.=0x%04X\n", PhyStat)); + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Stat Reg.=0x%04X\n", PhyStat1)); + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Spec Stat=0x%04X\n", PhySpecStat)); +#endif /* SK_DIAG || DEBUG */ + +#ifdef SK_DIAG + c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl); + c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT); + c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv); + c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl); + c_print("PHY Stat Reg=0x%04X\n", PhyStat); + c_print("PHY Stat Reg=0x%04X\n", PhyStat1); + c_print("PHY Spec Reg=0x%04X\n", PhySpecStat); +#endif /* SK_DIAG */ + +#endif /* VCPU */ + +} /* SkGmInitPhyMarv */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkXmInitPhyLone() - Initialize the Level One Phy registers + * + * Description: initializes all the Level One Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyLone( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 Ctrl1; + SK_U16 Ctrl2; + SK_U16 Ctrl3; + + Ctrl1 = PHY_CT_SP1000; + Ctrl2 = 0; + Ctrl3 = PHY_SEL_TYPE; + + pPrt = &pAC->GIni.GP[Port]; + + /* manually Master/Slave ? */ + if (pPrt->PMSMode != SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_L_1000C_MSE; + + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { + Ctrl2 |= PHY_L_1000C_MSC; + } + } + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + /* + * level one spec say: "1000 Mbps: manual mode not allowed" + * but lets see what happens... + */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyLone: no auto-negotiation Port %d\n", Port)); + /* Set DuplexMode in Config register */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + Ctrl1 |= PHY_CT_DUP_MD; + } + + /* Determine Master/Slave manually if not already done */ + if (pPrt->PMSMode == SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_L_1000C_MSE; /* set it to Slave */ + } + + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLES are transmitted + */ + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyLone: with auto-negotiation Port %d\n", Port)); + /* Set Auto-negotiation advertisement */ + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + Ctrl2 |= PHY_L_1000C_AHD; + break; + case SK_LMODE_AUTOFULL: + Ctrl2 |= PHY_L_1000C_AFD; + break; + case SK_LMODE_AUTOBOTH: + Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + Ctrl3 |= PHY_L_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + Ctrl3 |= PHY_L_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + Ctrl3 |= PHY_L_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + Ctrl3 |= PHY_L_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + /* Restart Auto-negotiation */ + Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG; + } + + /* Write 1000Base-T Control Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); + + /* Write AutoNeg Advertisement Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3)); + + if (DoLoop) { + /* Set the Phy Loopback bit, too */ + Ctrl1 |= PHY_CT_LOOP; + } + + /* Write to the Phy control register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Control Reg=0x%04X\n", Ctrl1)); +} /* SkXmInitPhyLone */ + + +/****************************************************************************** + * + * SkXmInitPhyNat() - Initialize the National Phy registers + * + * Description: initializes all the National Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyNat( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ +/* todo: National */ +} /* SkXmInitPhyNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkMacInitPhy() - Initialize the PHY registers + * + * Description: calls the Init PHY routines dep. on board type + * + * Note: + * + * Returns: + * nothing + */ +void SkMacInitPhy( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + case SK_PHY_XMAC: + SkXmInitPhyXmac(pAC, IoC, Port, DoLoop); + break; + case SK_PHY_BCOM: + SkXmInitPhyBcom(pAC, IoC, Port, DoLoop); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmInitPhyLone(pAC, IoC, Port, DoLoop); + break; + case SK_PHY_NAT: + SkXmInitPhyNat(pAC, IoC, Port, DoLoop); + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmInitPhyMarv(pAC, IoC, Port, DoLoop); + } +#endif /* YUKON */ + +} /* SkMacInitPhy */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmAutoNegDoneXmac() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneXmac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 LPAb; /* Link Partner Ability */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneXmac, Port %d\n", Port)); + + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb); + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); + + if ((LPAb & PHY_X_AN_RFB) != 0) { + /* At least one of the remote fault bit is set */ + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + /* Check Duplex mismatch */ + if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + else { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Duplex mode mismatch Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_DUP_CAP); + } + + /* Check PAUSE mismatch */ + /* We are NOT using chapter 4.23 of the Xaqti manual */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC || + pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) && + (LPAb & PHY_X_P_SYM_MD) != 0) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM && + (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND && + (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + else { + /* PAUSE mismatch -> no PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + } + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + + return(SK_AND_OK); +} /* SkXmAutoNegDoneXmac */ + + +/****************************************************************************** + * + * SkXmAutoNegDoneBcom() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneBcom( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 LPAb; /* Link Partner Ability */ + SK_U16 AuxStat; /* Auxiliary Status */ + +#ifdef TEST_ONLY +01-Sep-2000 RA;:;: + SK_U16 ResAb; /* Resolved Ability */ +#endif /* 0 */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneBcom, Port %d\n", Port)); + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb); +#ifdef TEST_ONLY +01-Sep-2000 RA;:;: + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); +#endif /* 0 */ + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat); + + if ((LPAb & PHY_B_AN_RF) != 0) { + /* Remote fault bit is set: Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + /* Check Duplex mismatch */ + if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + else { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Duplex mode mismatch Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_DUP_CAP); + } + +#ifdef TEST_ONLY +01-Sep-2000 RA;:;: + /* Check Master/Slave resolution */ + if ((ResAb & PHY_B_1000S_MSF) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + return(SK_AND_OTHER); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; +#endif /* 0 */ + + /* Check PAUSE mismatch ??? */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + else { + /* PAUSE mismatch -> no PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + } + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + + return(SK_AND_OK); +} /* SkXmAutoNegDoneBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmAutoNegDoneMarv() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkGmAutoNegDoneMarv( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 LPAb; /* Link Partner Ability */ + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 AuxStat; /* Auxiliary Status */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneMarv, Port %d\n", Port)); + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Link P.Abil.=0x%04X\n", LPAb)); + + if ((LPAb & PHY_M_AN_RF) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); + + /* Check Master/Slave resolution */ + if ((ResAb & PHY_B_1000S_MSF) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + return(SK_AND_OTHER); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + (SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE; + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat); + + /* Check Speed & Duplex resolved */ + if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Speed & Duplex not resolved, Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + return(SK_AND_DUP_CAP); + } + + if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + + /* Check PAUSE mismatch ??? */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + else { + /* PAUSE mismatch -> no PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + } + + /* set used link speed */ + switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) { + case (unsigned)PHY_M_PS_SPEED_1000: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + break; + case PHY_M_PS_SPEED_100: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; + break; + default: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; + } + + return(SK_AND_OK); +} /* SkGmAutoNegDoneMarv */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkXmAutoNegDoneLone() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneLone( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 LPAb; /* Link Partner Ability */ + SK_U16 QuickStat; /* Auxiliary Status */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneLone, Port %d\n", Port)); + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat); + + if ((LPAb & PHY_L_AN_RF) != 0) { + /* Remote fault bit is set */ + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + /* Check Duplex mismatch */ + if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + + /* Check Master/Slave resolution */ + if ((ResAb & PHY_L_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + return(SK_AND_OTHER); + } + else if (ResAb & PHY_L_1000S_MSR) { + pPrt->PMSStatus = SK_MS_STAT_MASTER; + } + else { + pPrt->PMSStatus = SK_MS_STAT_SLAVE; + } + + /* Check PAUSE mismatch */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + /* we must manually resolve the abilities here */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + /* default */ + break; + case SK_FLOW_MODE_LOC_SEND: + if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) == + (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + break; + case SK_FLOW_MODE_SYMMETRIC: + if ((QuickStat & PHY_L_QS_PAUSE) != 0) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + break; + case SK_FLOW_MODE_SYM_OR_REM: + if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) == + PHY_L_QS_AS_PAUSE) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if ((QuickStat & PHY_L_QS_PAUSE) != 0) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + return(SK_AND_OK); +} /* SkXmAutoNegDoneLone */ + + +/****************************************************************************** + * + * SkXmAutoNegDoneNat() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneNat( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +/* todo: National */ + return(SK_AND_OK); +} /* SkXmAutoNegDoneNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkMacAutoNegDone() - Auto-negotiation handling + * + * Description: calls the auto-negotiation done routines dep. on board type + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +int SkMacAutoNegDone( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int Rtv; + + Rtv = SK_AND_OK; + + pPrt = &pAC->GIni.GP[Port]; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port); + break; + case SK_PHY_BCOM: + Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port); + break; + case SK_PHY_NAT: + Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port); + break; +#endif /* OTHER_PHY */ + default: + return(SK_AND_OTHER); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port); + } +#endif /* YUKON */ + + if (Rtv != SK_AND_OK) { + return(Rtv); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done Port %d\n", Port)); + + /* We checked everything and may now enable the link */ + pPrt->PAutoNegFail = SK_FALSE; + + SkMacRxTxEnable(pAC, IoC, Port); + + return(SK_AND_OK); +} /* SkMacAutoNegDone */ + + +/****************************************************************************** + * + * SkMacRxTxEnable() - Enable Rx/Tx activity if port is up + * + * Description: enables Rx/Tx dep. on board type + * + * Returns: + * 0 o.k. + * != 0 Error happened + */ +int SkMacRxTxEnable( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 Reg; /* 16-bit register value */ + SK_U16 IntMask; /* MAC interrupt mask */ +#ifdef GENESIS + SK_U16 SWord; +#endif + + pPrt = &pAC->GIni.GP[Port]; + + if (!pPrt->PHWLinkUp) { + /* The Hardware link is NOT up */ + return(0); + } + + if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF || + pPrt->PLinkMode == SK_LMODE_AUTOFULL || + pPrt->PLinkMode == SK_LMODE_AUTOBOTH) && + pPrt->PAutoNegFail) { + /* Auto-negotiation is not done or failed */ + return(0); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* set Duplex Mode and Pause Mode */ + SkXmInitDupMd(pAC, IoC, Port); + + SkXmInitPauseMd(pAC, IoC, Port); + + /* + * Initialize the Interrupt Mask Register. Default IRQs are... + * - Link Asynchronous Event + * - Link Partner requests config + * - Auto Negotiation Done + * - Rx Counter Event Overflow + * - Tx Counter Event Overflow + * - Transmit FIFO Underrun + */ + IntMask = XM_DEF_MSK; + +#ifdef DEBUG + /* add IRQ for Receive FIFO Overflow */ + IntMask &= ~XM_IS_RXF_OV; +#endif /* DEBUG */ + + if (pPrt->PhyType != SK_PHY_XMAC) { + /* disable GP0 interrupt bit */ + IntMask |= XM_IS_INP_ASS; + } + XM_OUT16(IoC, Port, XM_IMSK, IntMask); + + /* get MMU Command Reg. */ + XM_IN16(IoC, Port, XM_MMU_CMD, &Reg); + + if (pPrt->PhyType != SK_PHY_XMAC && + (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) { + /* set to Full Duplex */ + Reg |= XM_MMU_GMII_FD; + } + + switch (pPrt->PhyType) { + case SK_PHY_BCOM: + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, + (SK_U16)(SWord & ~PHY_B_AC_DIS_PM)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, + (SK_U16)PHY_B_DEF_MSK); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK); + break; + case SK_PHY_NAT: + /* todo National: + SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */ + /* no interrupts possible from National ??? */ + break; +#endif /* OTHER_PHY */ + } + + /* enable Rx/Tx */ + XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* + * Initialize the Interrupt Mask Register. Default IRQs are... + * - Rx Counter Event Overflow + * - Tx Counter Event Overflow + * - Transmit FIFO Underrun + */ + IntMask = GMAC_DEF_MSK; + +#ifdef DEBUG + /* add IRQ for Receive FIFO Overrun */ + IntMask |= GM_IS_RX_FF_OR; +#endif /* DEBUG */ + + SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask); + + /* get General Purpose Control */ + GM_IN16(IoC, Port, GM_GP_CTRL, &Reg); + + if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) { + /* set to Full Duplex */ + Reg |= GM_GPCR_DUP_FULL; + } + + /* enable Rx/Tx */ + GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Reg | GM_GPCR_RX_ENA | + GM_GPCR_TX_ENA)); + +#ifndef VCPU + /* Enable all PHY interrupts */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, + (SK_U16)PHY_M_DEF_MSK); +#endif /* VCPU */ + } +#endif /* YUKON */ + + return(0); + +} /* SkMacRxTxEnable */ + + +/****************************************************************************** + * + * SkMacRxTxDisable() - Disable Receiver and Transmitter + * + * Description: disables Rx/Tx dep. on board type + * + * Returns: N/A + */ +void SkMacRxTxDisable( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 Word; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); + + XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); + + /* dummy read to ensure writing */ + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + GM_IN16(IoC, Port, GM_GP_CTRL, &Word); + + GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Word & ~(GM_GPCR_RX_ENA | + GM_GPCR_TX_ENA))); + + /* dummy read to ensure writing */ + GM_IN16(IoC, Port, GM_GP_CTRL, &Word); + } +#endif /* YUKON */ + +} /* SkMacRxTxDisable */ + + +/****************************************************************************** + * + * SkMacIrqDisable() - Disable IRQ from MAC + * + * Description: sets the IRQ-mask to disable IRQ dep. on board type + * + * Returns: N/A + */ +void SkMacIrqDisable( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; +#ifdef GENESIS + SK_U16 Word; +#endif + + pPrt = &pAC->GIni.GP[Port]; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + /* disable all XMAC IRQs */ + XM_OUT16(IoC, Port, XM_IMSK, 0xffff); + + /* Disable all PHY interrupts */ + switch (pPrt->PhyType) { + case SK_PHY_BCOM: + /* Make sure that PHY is initialized */ + if (pPrt->PState != SK_PRT_RESET) { + /* NOT allowed if BCOM is in RESET state */ + /* Workaround BCOM Errata (#10523) all BCom */ + /* Disable Power Management if link is down */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, + (SK_U16)(Word | PHY_B_AC_DIS_PM)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff); + } + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0); + break; + case SK_PHY_NAT: + /* todo: National + SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */ + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* disable all GMAC IRQs */ + SK_OUT8(IoC, GMAC_IRQ_MSK, 0); + +#ifndef VCPU + /* Disable all PHY interrupts */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); +#endif /* VCPU */ + } +#endif /* YUKON */ + +} /* SkMacIrqDisable */ + + +#ifdef SK_DIAG +/****************************************************************************** + * + * SkXmSendCont() - Enable / Disable Send Continuous Mode + * + * Description: enable / disable Send Continuous Mode on XMAC + * + * Returns: + * nothing + */ +void SkXmSendCont( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ + SK_U32 MdReg; + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + if (Enable) { + MdReg |= XM_MD_TX_CONT; + } + else { + MdReg &= ~XM_MD_TX_CONT; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + +} /* SkXmSendCont */ + + +/****************************************************************************** + * + * SkMacTimeStamp() - Enable / Disable Time Stamp + * + * Description: enable / disable Time Stamp generation for Rx packets + * + * Returns: + * nothing + */ +void SkMacTimeStamp( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ + SK_U32 MdReg; + SK_U8 TimeCtrl; + + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + if (Enable) { + MdReg |= XM_MD_ATS; + } + else { + MdReg &= ~XM_MD_ATS; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + } + else { + if (Enable) { + TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ; + } + else { + TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ; + } + /* Start/Stop Time Stamp Timer */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, TimeCtrl); + } + +} /* SkMacTimeStamp*/ + +#else /* !SK_DIAG */ + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg + * + * This function analyses the Interrupt status word. If any of the + * Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable + * is set true. + */ +void SkXmAutoNegLipaXmac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U16 IStatus) /* Interrupt Status word to analyse */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO && + (IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) { + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04X\n", + Port, IStatus)); + pPrt->PLipaAutoNeg = SK_LIPA_AUTO; + } +} /* SkXmAutoNegLipaXmac */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg + * + * This function analyses the PHY status word. + * If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable + * is set true. + */ +void SkMacAutoNegLipaPhy( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U16 PhyStat) /* PHY Status word to analyse */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO && + (PhyStat & PHY_ST_AN_OVER) != 0) { + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04X\n", + Port, PhyStat)); + pPrt->PLipaAutoNeg = SK_LIPA_AUTO; + } +} /* SkMacAutoNegLipaPhy */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmIrq() - Interrupt Service Routine + * + * Description: services an Interrupt Request of the XMAC + * + * Note: + * With an external PHY, some interrupt bits are not meaningfull any more: + * - LinkAsyncEvent (bit #14) XM_IS_LNK_AE + * - LinkPartnerReqConfig (bit #10) XM_IS_LIPA_RC + * - Page Received (bit #9) XM_IS_RX_PAGE + * - NextPageLoadedForXmt (bit #8) XM_IS_TX_PAGE + * - AutoNegDone (bit #7) XM_IS_AND + * Also probably not valid any more is the GP0 input bit: + * - GPRegisterBit0set XM_IS_INP_ASS + * + * Returns: + * nothing + */ +static void SkXmIrq( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_EVPARA Para; + SK_U16 IStatus; /* Interrupt status read from the XMAC */ + SK_U16 IStatus2; +#ifdef SK_SLIM + SK_U64 OverflowStatus; +#endif + + pPrt = &pAC->GIni.GP[Port]; + + XM_IN16(IoC, Port, XM_ISRC, &IStatus); + + /* LinkPartner Auto-negable? */ + if (pPrt->PhyType == SK_PHY_XMAC) { + SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus); + } + else { + /* mask bits that are not used with ext. PHY */ + IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC | + XM_IS_RX_PAGE | XM_IS_TX_PAGE | + XM_IS_AND | XM_IS_INP_ASS); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("XmacIrq Port %d Isr 0x%04X\n", Port, IStatus)); + + if (!pPrt->PHWLinkUp) { + /* Spurious XMAC interrupt */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("SkXmIrq: spurious interrupt on Port %d\n", Port)); + return; + } + + if ((IStatus & XM_IS_INP_ASS) != 0) { + /* Reread ISR Register if link is not in sync */ + XM_IN16(IoC, Port, XM_ISRC, &IStatus2); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("SkXmIrq: Link async. Double check Port %d 0x%04X 0x%04X\n", + Port, IStatus, IStatus2)); + IStatus &= ~XM_IS_INP_ASS; + IStatus |= IStatus2; + } + + if ((IStatus & XM_IS_LNK_AE) != 0) { + /* not used, GP0 is used instead */ + } + + if ((IStatus & XM_IS_TX_ABORT) != 0) { + /* not used */ + } + + if ((IStatus & XM_IS_FRC_INT) != 0) { + /* not used, use ASIC IRQ instead if needed */ + } + + if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) { + SkHWLinkDown(pAC, IoC, Port); + + /* Signal to RLMT */ + Para.Para32[0] = (SK_U32)Port; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + } + + if ((IStatus & XM_IS_RX_PAGE) != 0) { + /* not used */ + } + + if ((IStatus & XM_IS_TX_PAGE) != 0) { + /* not used */ + } + + if ((IStatus & XM_IS_AND) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("SkXmIrq: AND on link that is up Port %d\n", Port)); + } + + if ((IStatus & XM_IS_TSC_OV) != 0) { + /* not used */ + } + + /* Combined Tx & Rx Counter Overflow SIRQ Event */ + if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) { +#ifdef SK_SLIM + SkXmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus); +#else + Para.Para32[0] = (SK_U32)Port; + Para.Para32[1] = (SK_U32)IStatus; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para); +#endif /* SK_SLIM */ + } + + if ((IStatus & XM_IS_RXF_OV) != 0) { + /* normal situation -> no effect */ +#ifdef DEBUG + pPrt->PRxOverCnt++; +#endif /* DEBUG */ + } + + if ((IStatus & XM_IS_TXF_UR) != 0) { + /* may NOT happen -> error log */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG); + } + + if ((IStatus & XM_IS_TX_COMP) != 0) { + /* not served here */ + } + + if ((IStatus & XM_IS_RX_COMP) != 0) { + /* not served here */ + } +} /* SkXmIrq */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmIrq() - Interrupt Service Routine + * + * Description: services an Interrupt Request of the GMAC + * + * Note: + * + * Returns: + * nothing + */ +static void SkGmIrq( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U8 IStatus; /* Interrupt status */ +#ifdef SK_SLIM + SK_U64 OverflowStatus; +#else + SK_EVPARA Para; +#endif + + pPrt = &pAC->GIni.GP[Port]; + + SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus); + +#ifdef XXX + /* LinkPartner Auto-negable? */ + SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus); +#endif /* XXX */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("GmacIrq Port %d Isr 0x%04X\n", Port, IStatus)); + + /* Combined Tx & Rx Counter Overflow SIRQ Event */ + if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) { + /* these IRQs will be cleared by reading GMACs register */ +#ifdef SK_SLIM + SkGmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus); +#else + Para.Para32[0] = (SK_U32)Port; + Para.Para32[1] = (SK_U32)IStatus; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para); +#endif + } + + if (IStatus & GM_IS_RX_FF_OR) { + /* clear GMAC Rx FIFO Overrun IRQ */ + SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO); +#ifdef DEBUG + pPrt->PRxOverCnt++; +#endif /* DEBUG */ + } + + if (IStatus & GM_IS_TX_FF_UR) { + /* clear GMAC Tx FIFO Underrun IRQ */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU); + /* may NOT happen -> error log */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG); + } + + if (IStatus & GM_IS_TX_COMPL) { + /* not served here */ + } + + if (IStatus & GM_IS_RX_COMPL) { + /* not served here */ + } +} /* SkGmIrq */ +#endif /* YUKON */ + + +/****************************************************************************** + * + * SkMacIrq() - Interrupt Service Routine for MAC + * + * Description: calls the Interrupt Service Routine dep. on board type + * + * Returns: + * nothing + */ +void SkMacIrq( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* IRQ from XMAC */ + SkXmIrq(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* IRQ from GMAC */ + SkGmIrq(pAC, IoC, Port); + } +#endif /* YUKON */ + +} /* SkMacIrq */ + +#endif /* !SK_DIAG */ + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmUpdateStats() - Force the XMAC to output the current statistic + * + * Description: + * The XMAC holds its statistic internally. To obtain the current + * values a command must be sent so that the statistic data will + * be written to a predefined memory area on the adapter. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmUpdateStats( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 StatReg; + int WaitIndex; + + pPrt = &pAC->GIni.GP[Port]; + WaitIndex = 0; + + /* Send an update command to XMAC specified */ + XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); + + /* + * It is an auto-clearing register. If the command bits + * went to zero again, the statistics are transferred. + * Normally the command should be executed immediately. + * But just to be sure we execute a loop. + */ + do { + + XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg); + + if (++WaitIndex > 10) { + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG); + + return(1); + } + } while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0); + + return(0); +} /* SkXmUpdateStats */ + + +/****************************************************************************** + * + * SkXmMacStatistic() - Get XMAC counter value + * + * Description: + * Gets the 32bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * must be counted in software by monitoring counter overflow interrupts. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmMacStatistic( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 StatAddr, /* MIB counter base address */ +SK_U32 SK_FAR *pVal) /* ptr to return statistic value */ +{ + if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); + + return(1); + } + + XM_IN32(IoC, Port, StatAddr, pVal); + + return(0); +} /* SkXmMacStatistic */ + + +/****************************************************************************** + * + * SkXmResetCounter() - Clear MAC statistic counter + * + * Description: + * Force the XMAC to clear its statistic counter. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmResetCounter( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC); + + return(0); +} /* SkXmResetCounter */ + + +/****************************************************************************** + * + * SkXmOverflowStatus() - Gets the status of counter overflow interrupt + * + * Description: + * Checks the source causing an counter overflow interrupt. On success the + * resulting counter overflow status is written to <pStatus>, whereas the + * upper dword stores the XMAC ReceiveCounterEvent register and the lower + * dword the XMAC TransmitCounterEvent register. + * + * Note: + * For XMAC the interrupt source is a self-clearing register, so the source + * must be checked only once. SIRQ module does another check to be sure + * that no interrupt get lost during process time. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmOverflowStatus( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 IStatus, /* Interupt Status from MAC */ +SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ +{ + SK_U64 Status; /* Overflow status */ + SK_U32 RegVal; + + Status = 0; + + if ((IStatus & XM_IS_RXC_OV) != 0) { + + XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal); + Status |= (SK_U64)RegVal << 32; + } + + if ((IStatus & XM_IS_TXC_OV) != 0) { + + XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal); + Status |= (SK_U64)RegVal; + } + + *pStatus = Status; + + return(0); +} /* SkXmOverflowStatus */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmUpdateStats() - Force the GMAC to output the current statistic + * + * Description: + * Empty function for GMAC. Statistic data is accessible in direct way. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmUpdateStats( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + return(0); +} + + +/****************************************************************************** + * + * SkGmMacStatistic() - Get GMAC counter value + * + * Description: + * Gets the 32bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * must be counted in software by monitoring counter overflow interrupts. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmMacStatistic( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 StatAddr, /* MIB counter base address */ +SK_U32 SK_FAR *pVal) /* ptr to return statistic value */ +{ + + if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr)); + return(1); + } + + GM_IN32(IoC, Port, StatAddr, pVal); + + return(0); +} /* SkGmMacStatistic */ + + +/****************************************************************************** + * + * SkGmResetCounter() - Clear MAC statistic counter + * + * Description: + * Force GMAC to clear its statistic counter. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmResetCounter( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 Reg; /* Phy Address Register */ + SK_U16 Word; + int i; + + GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg); + + /* set MIB Clear Counter Mode */ + GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR); + + /* read all MIB Counters with Clear Mode set */ + for (i = 0; i < GM_MIB_CNT_SIZE; i++) { + /* the reset is performed only when the lower 16 bits are read */ + GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word); + } + + /* clear MIB Clear Counter Mode */ + GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg); + + return(0); +} /* SkGmResetCounter */ + + +/****************************************************************************** + * + * SkGmOverflowStatus() - Gets the status of counter overflow interrupt + * + * Description: + * Checks the source causing an counter overflow interrupt. On success the + * resulting counter overflow status is written to <pStatus>, whereas the + * the following bit coding is used: + * 63:56 - unused + * 55:48 - TxRx interrupt register bit7:0 + * 32:47 - Rx interrupt register + * 31:24 - unused + * 23:16 - TxRx interrupt register bit15:8 + * 15:0 - Tx interrupt register + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmOverflowStatus( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 IStatus, /* Interupt Status from MAC */ +SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ +{ + SK_U64 Status; /* Overflow status */ + SK_U16 RegVal; + + Status = 0; + + if ((IStatus & GM_IS_RX_CO_OV) != 0) { + /* this register is self-clearing after read */ + GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal); + Status |= (SK_U64)RegVal << 32; + } + + if ((IStatus & GM_IS_TX_CO_OV) != 0) { + /* this register is self-clearing after read */ + GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal); + Status |= (SK_U64)RegVal; + } + + /* this register is self-clearing after read */ + GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal); + /* Rx overflow interrupt register bits (LoByte)*/ + Status |= (SK_U64)((SK_U8)RegVal) << 48; + /* Tx overflow interrupt register bits (HiByte)*/ + Status |= (SK_U64)(RegVal >> 8) << 16; + + *pStatus = Status; + + return(0); +} /* SkGmOverflowStatus */ + + +#ifndef SK_SLIM +/****************************************************************************** + * + * SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test + * + * Description: + * starts the cable diagnostic test if 'StartTest' is true + * gets the results if 'StartTest' is true + * + * NOTE: this test is meaningful only when link is down + * + * Returns: + * 0: success + * 1: no YUKON copper + * 2: test in progress + */ +int SkGmCableDiagStatus( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL StartTest) /* flag for start / get result */ +{ + int i; + SK_U16 RegVal; + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + + return(1); + } + + if (StartTest) { + /* only start the cable test */ + if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) { + /* apply TDR workaround from Marvell */ + SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e); + + SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100); + } + + /* set address to 0 for MDI[0] */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0); + + /* Read Cable Diagnostic Reg */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); + + /* start Cable Diagnostic Test */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, + (SK_U16)(RegVal | PHY_M_CABD_ENA_TEST)); + + return(0); + } + + /* Read Cable Diagnostic Reg */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Cable Diag.=0x%04X\n", RegVal)); + + if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) { + /* test is running */ + return(2); + } + + /* get the test results */ + for (i = 0; i < 4; i++) { + /* set address to i for MDI[i] */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i); + + /* get Cable Diagnostic values */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); + + pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK); + + pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13); + } + + return(0); +} /* SkGmCableDiagStatus */ +#endif /* !SK_SLIM */ +#endif /* YUKON */ + +/* End of file */ diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e6d937ec688..5d812de65d9 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -149,6 +149,8 @@ static const char *yukon2_name[] = { "FE", /* 0xb7 */ }; +static void sky2_set_multicast(struct net_device *dev); + /* Access to external PHY */ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { @@ -2900,8 +2902,10 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) sky2->autoneg = ecmd->autoneg; sky2->advertising = ecmd->advertising; - if (netif_running(dev)) + if (netif_running(dev)) { sky2_phy_reinit(sky2); + sky2_set_multicast(dev); + } return 0; } @@ -2994,6 +2998,7 @@ static int sky2_nway_reset(struct net_device *dev) return -EINVAL; sky2_phy_reinit(sky2); + sky2_set_multicast(dev); return 0; } @@ -4171,6 +4176,8 @@ static int sky2_resume(struct pci_dev *pdev) dev_close(dev); goto out; } + + sky2_set_multicast(dev); } } diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 590b12c7246..82d837ab4db 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1441,17 +1441,14 @@ static void spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) { u32 error_reg1, error_reg2; - u32 mask_reg1, mask_reg2; u32 i; int show_error = 1; error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS); error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS); - mask_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1MSK); - mask_reg2 = spider_net_read_reg(card,SPIDER_NET_GHIINT2MSK); - error_reg1 &= mask_reg1; - error_reg2 &= mask_reg2; + error_reg1 &= SPIDER_NET_INT1_MASK_VALUE; + error_reg2 &= SPIDER_NET_INT2_MASK_VALUE; /* check GHIINT0STS ************************************/ if (status_reg) @@ -1679,11 +1676,10 @@ spider_net_interrupt(int irq, void *ptr) { struct net_device *netdev = ptr; struct spider_net_card *card = netdev_priv(netdev); - u32 status_reg, mask_reg; + u32 status_reg; status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS); - mask_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); - status_reg &= mask_reg; + status_reg &= SPIDER_NET_INT0_MASK_VALUE; if (!status_reg) return IRQ_NONE; diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 12e01b24105..9a38dfe45f8 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -2148,7 +2148,7 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth) for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) { if (ugeth->tx_skbuff[i][j]) { dma_unmap_single(NULL, - ((qe_bd_t *)bd)->buf, + ((struct qe_bd *)bd)->buf, (in_be32((u32 *)bd) & BD_LENGTH_MASK), DMA_TO_DEVICE); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index c5d6753a55e..dfbd01eaaf3 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3183,6 +3183,9 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); + /* keep from doing and rearming periodic work if shutting down */ + if (bcm43xx_status(bcm) == BCM43xx_STAT_UNINIT) + goto unlock_mutex; if (unlikely(bcm->periodic_state % 60 == 0)) { /* Periodic work will take a long time, so we want it to * be preemtible. @@ -3228,14 +3231,10 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) mmiowb(); bcm->periodic_state++; spin_unlock_irqrestore(&bcm->irq_lock, flags); +unlock_mutex: mutex_unlock(&bcm->mutex); } -void bcm43xx_periodic_tasks_delete(struct bcm43xx_private *bcm) -{ - cancel_rearming_delayed_work(&bcm->periodic_work); -} - void bcm43xx_periodic_tasks_setup(struct bcm43xx_private *bcm) { struct delayed_work *work = &bcm->periodic_work; @@ -3285,6 +3284,14 @@ static int bcm43xx_rng_init(struct bcm43xx_private *bcm) return err; } +void bcm43xx_cancel_work(struct bcm43xx_private *bcm) +{ + /* The system must be unlocked when this routine is entered. + * If not, the next 2 steps may deadlock */ + cancel_work_sync(&bcm->restart_work); + cancel_delayed_work_sync(&bcm->periodic_work); +} + static int bcm43xx_shutdown_all_wireless_cores(struct bcm43xx_private *bcm) { int ret = 0; @@ -3321,7 +3328,12 @@ static void bcm43xx_free_board(struct bcm43xx_private *bcm) { bcm43xx_rng_exit(bcm); bcm43xx_sysfs_unregister(bcm); - bcm43xx_periodic_tasks_delete(bcm); + + mutex_lock(&(bcm)->mutex); + bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); + mutex_unlock(&(bcm)->mutex); + + bcm43xx_cancel_work(bcm); mutex_lock(&(bcm)->mutex); bcm43xx_shutdown_all_wireless_cores(bcm); @@ -4016,7 +4028,7 @@ static int bcm43xx_net_stop(struct net_device *net_dev) err = bcm43xx_disable_interrupts_sync(bcm); assert(!err); bcm43xx_free_board(bcm); - flush_scheduled_work(); + bcm43xx_cancel_work(bcm); return 0; } @@ -4148,9 +4160,9 @@ static void bcm43xx_chip_reset(struct work_struct *work) struct bcm43xx_phyinfo *phy; int err = -ENODEV; + bcm43xx_cancel_work(bcm); mutex_lock(&(bcm)->mutex); if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { - bcm43xx_periodic_tasks_delete(bcm); phy = bcm43xx_current_phy(bcm); err = bcm43xx_select_wireless_core(bcm, phy->type); if (!err) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h index c8f3c532bab..14cfbeb582e 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h @@ -122,7 +122,7 @@ void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy); void bcm43xx_mac_suspend(struct bcm43xx_private *bcm); void bcm43xx_mac_enable(struct bcm43xx_private *bcm); -void bcm43xx_periodic_tasks_delete(struct bcm43xx_private *bcm); +void bcm43xx_cancel_work(struct bcm43xx_private *bcm); void bcm43xx_periodic_tasks_setup(struct bcm43xx_private *bcm); void bcm43xx_controller_restart(struct bcm43xx_private *bcm, const char *reason); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c index c71b998a369..8ab5f93d192 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c @@ -327,7 +327,7 @@ static ssize_t bcm43xx_attr_phymode_store(struct device *dev, goto out; } - bcm43xx_periodic_tasks_delete(bcm); + bcm43xx_cancel_work(bcm); mutex_lock(&(bcm)->mutex); err = bcm43xx_select_wireless_core(bcm, phytype); if (!err) |