aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAlan Cox <alan@linux.intel.com>2009-08-27 11:01:49 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2009-09-15 12:02:28 -0700
commitf2c98d27b8e88cd17bb3e77f8fccf70f8d2ebd2f (patch)
treefbc73db3537306610e6f2e08b19d9c028616c373 /drivers
parentb8ab735253320dcb9432d941536a49640cdbd914 (diff)
Staging: et131x: clean up PM_CSR_t
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/staging/et131x/et1310_address_map.h45
-rw-r--r--drivers/staging/et131x/et1310_mac.c12
-rw-r--r--drivers/staging/et131x/et1310_pm.c27
-rw-r--r--drivers/staging/et131x/et131x_initpci.c20
-rw-r--r--drivers/staging/et131x/et131x_isr.c13
5 files changed, 43 insertions, 74 deletions
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
index b395f9c660e..8aaa62bc113 100644
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -73,37 +73,20 @@
/*
* structure for power management control status reg in global address map
* located at address 0x0010
+ * jagcore_rx_rdy bit 9
+ * jagcore_tx_rdy bit 8
+ * phy_lped_en bit 7
+ * phy_sw_coma bit 6
+ * rxclk_gate bit 5
+ * txclk_gate bit 4
+ * sysclk_gate bit 3
+ * jagcore_rx_en bit 2
+ * jagcore_tx_en bit 1
+ * gigephy_en bit 0
*/
-typedef union _PM_CSR_t {
- u32 value;
- struct {
-#ifdef _BIT_FIELDS_HTOL
- u32 unused:22; /* bits 10-31 */
- u32 pm_jagcore_rx_rdy:1; /* bit 9 */
- u32 pm_jagcore_tx_rdy:1; /* bit 8 */
- u32 pm_phy_lped_en:1; /* bit 7 */
- u32 pm_phy_sw_coma:1; /* bit 6 */
- u32 pm_rxclk_gate:1; /* bit 5 */
- u32 pm_txclk_gate:1; /* bit 4 */
- u32 pm_sysclk_gate:1; /* bit 3 */
- u32 pm_jagcore_rx_en:1; /* bit 2 */
- u32 pm_jagcore_tx_en:1; /* bit 1 */
- u32 pm_gigephy_en:1; /* bit 0 */
-#else
- u32 pm_gigephy_en:1; /* bit 0 */
- u32 pm_jagcore_tx_en:1; /* bit 1 */
- u32 pm_jagcore_rx_en:1; /* bit 2 */
- u32 pm_sysclk_gate:1; /* bit 3 */
- u32 pm_txclk_gate:1; /* bit 4 */
- u32 pm_rxclk_gate:1; /* bit 5 */
- u32 pm_phy_sw_coma:1; /* bit 6 */
- u32 pm_phy_lped_en:1; /* bit 7 */
- u32 pm_jagcore_tx_rdy:1; /* bit 8 */
- u32 pm_jagcore_rx_rdy:1; /* bit 9 */
- u32 unused:22; /* bits 10-31 */
-#endif
- } bits;
-} PM_CSR_t, *PPM_CSR_t;
+
+#define ET_PM_PHY_SW_COMA 0x40
+#define ET_PMCSR_INIT 0x38
/*
* structure for interrupt status reg in global address map
@@ -271,7 +254,7 @@ typedef struct _GLOBAL_t { /* Location: */
u32 txq_end_addr; /* 0x0004 */
u32 rxq_start_addr; /* 0x0008 */
u32 rxq_end_addr; /* 0x000C */
- PM_CSR_t pm_csr; /* 0x0010 */
+ u32 pm_csr; /* 0x0010 */
u32 unused; /* 0x0014 */
INTERRUPT_t int_status; /* 0x0018 */
INTERRUPT_t int_mask; /* 0x001C */
diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c
index b2123d0a8b0..a27d8157b24 100644
--- a/drivers/staging/et131x/et1310_mac.c
+++ b/drivers/staging/et131x/et1310_mac.c
@@ -672,7 +672,7 @@ void SetupDeviceForMulticast(struct et131x_adapter *etdev)
uint32_t hash2 = 0;
uint32_t hash3 = 0;
uint32_t hash4 = 0;
- PM_CSR_t pm_csr;
+ u32 pm_csr;
DBG_ENTER(et131x_dbginfo);
@@ -718,8 +718,8 @@ void SetupDeviceForMulticast(struct et131x_adapter *etdev)
}
/* Write out the new hash to the device */
- pm_csr.value = readl(&etdev->regs->global.pm_csr.value);
- if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ pm_csr = readl(&etdev->regs->global.pm_csr);
+ if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) {
writel(hash1, &rxmac->multi_hash1);
writel(hash2, &rxmac->multi_hash2);
writel(hash3, &rxmac->multi_hash3);
@@ -735,7 +735,7 @@ void SetupDeviceForUnicast(struct et131x_adapter *etdev)
RXMAC_UNI_PF_ADDR1_t uni_pf1;
RXMAC_UNI_PF_ADDR2_t uni_pf2;
RXMAC_UNI_PF_ADDR3_t uni_pf3;
- PM_CSR_t pm_csr;
+ u32 pm_csr;
DBG_ENTER(et131x_dbginfo);
@@ -763,8 +763,8 @@ void SetupDeviceForUnicast(struct et131x_adapter *etdev)
uni_pf1.bits.addr1_5 = etdev->CurrentAddress[4];
uni_pf1.bits.addr1_6 = etdev->CurrentAddress[5];
- pm_csr.value = readl(&etdev->regs->global.pm_csr.value);
- if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ pm_csr = readl(&etdev->regs->global.pm_csr);
+ if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) {
writel(uni_pf1.value, &rxmac->uni_pf_addr1.value);
writel(uni_pf2.value, &rxmac->uni_pf_addr2.value);
writel(uni_pf3.value, &rxmac->uni_pf_addr3.value);
diff --git a/drivers/staging/et131x/et1310_pm.c b/drivers/staging/et131x/et1310_pm.c
index 846c80b2c57..ea186a8cc5d 100644
--- a/drivers/staging/et131x/et1310_pm.c
+++ b/drivers/staging/et131x/et1310_pm.c
@@ -120,12 +120,11 @@ extern dbg_info_t *et131x_dbginfo;
void EnablePhyComa(struct et131x_adapter *etdev)
{
unsigned long flags;
- PM_CSR_t GlobalPmCSR;
- int32_t LoopCounter = 10;
+ u32 GlobalPmCSR;
DBG_ENTER(et131x_dbginfo);
- GlobalPmCSR.value = readl(&etdev->regs->global.pm_csr.value);
+ GlobalPmCSR = readl(&etdev->regs->global.pm_csr);
/* Save the GbE PHY speed and duplex modes. Need to restore this
* when cable is plugged back in
@@ -141,14 +140,12 @@ void EnablePhyComa(struct et131x_adapter *etdev)
/* Wait for outstanding Receive packets */
/* Gate off JAGCore 3 clock domains */
- GlobalPmCSR.bits.pm_sysclk_gate = 0;
- GlobalPmCSR.bits.pm_txclk_gate = 0;
- GlobalPmCSR.bits.pm_rxclk_gate = 0;
- writel(GlobalPmCSR.value, &etdev->regs->global.pm_csr.value);
+ GlobalPmCSR &= ~ET_PMCSR_INIT;
+ writel(GlobalPmCSR, &etdev->regs->global.pm_csr);
/* Program gigE PHY in to Coma mode */
- GlobalPmCSR.bits.pm_phy_sw_coma = 1;
- writel(GlobalPmCSR.value, &etdev->regs->global.pm_csr.value);
+ GlobalPmCSR |= ET_PM_PHY_SW_COMA;
+ writel(GlobalPmCSR, &etdev->regs->global.pm_csr);
DBG_LEAVE(et131x_dbginfo);
}
@@ -159,18 +156,16 @@ void EnablePhyComa(struct et131x_adapter *etdev)
*/
void DisablePhyComa(struct et131x_adapter *etdev)
{
- PM_CSR_t GlobalPmCSR;
+ u32 GlobalPmCSR;
DBG_ENTER(et131x_dbginfo);
- GlobalPmCSR.value = readl(&etdev->regs->global.pm_csr.value);
+ GlobalPmCSR = readl(&etdev->regs->global.pm_csr);
/* Disable phy_sw_coma register and re-enable JAGCore clocks */
- GlobalPmCSR.bits.pm_sysclk_gate = 1;
- GlobalPmCSR.bits.pm_txclk_gate = 1;
- GlobalPmCSR.bits.pm_rxclk_gate = 1;
- GlobalPmCSR.bits.pm_phy_sw_coma = 0;
- writel(GlobalPmCSR.value, &etdev->regs->global.pm_csr.value);
+ GlobalPmCSR |= ET_PMCSR_INIT;
+ GlobalPmCSR &= ~ET_PM_PHY_SW_COMA;
+ writel(GlobalPmCSR, &etdev->regs->global.pm_csr);
/* Restore the GbE PHY speed and duplex modes;
* Reset JAGCore; re-configure and initialize JAGCore and gigE PHY
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index bea9918d168..d7a1b34550a 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -474,16 +474,16 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
void et131x_error_timer_handler(unsigned long data)
{
struct et131x_adapter *etdev = (struct et131x_adapter *) data;
- PM_CSR_t pm_csr;
+ u32 pm_csr;
- pm_csr.value = readl(&etdev->regs->global.pm_csr.value);
+ pm_csr = readl(&etdev->regs->global.pm_csr);
- if (pm_csr.bits.pm_phy_sw_coma == 0)
+ if ((pm_csr & ET_PM_PHY_SW_COMA) == 0)
UpdateMacStatHostCounters(etdev);
else
DBG_VERBOSE(et131x_dbginfo,
"No interrupts, in PHY coma, pm_csr = 0x%x\n",
- pm_csr.value);
+ pm_csr);
if (!etdev->Bmsr.bits.link_status &&
etdev->RegistryPhyComa &&
@@ -494,7 +494,7 @@ void et131x_error_timer_handler(unsigned long data)
if (etdev->PoMgmt.TransPhyComaModeOnBoot == 10) {
if (!etdev->Bmsr.bits.link_status
&& etdev->RegistryPhyComa) {
- if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) {
/* NOTE - This was originally a 'sync with
* interrupt'. How to do that under Linux?
*/
@@ -1002,15 +1002,7 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev,
/* Perform device-specific initialization here (See code below) */
/* If Phy COMA mode was enabled when we went down, disable it here. */
- {
- PM_CSR_t GlobalPmCSR = { 0 };
-
- GlobalPmCSR.bits.pm_sysclk_gate = 1;
- GlobalPmCSR.bits.pm_txclk_gate = 1;
- GlobalPmCSR.bits.pm_rxclk_gate = 1;
- writel(GlobalPmCSR.value,
- &adapter->regs->global.pm_csr.value);
- }
+ writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr);
/* Issue a global reset to the et1310 */
DBG_TRACE(et131x_dbginfo, "Issuing soft reset...\n");
diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c
index 478569fcab1..00b815ac12c 100644
--- a/drivers/staging/et131x/et131x_isr.c
+++ b/drivers/staging/et131x/et131x_isr.c
@@ -274,14 +274,13 @@ void et131x_isr_handler(struct work_struct *work)
*/
if (etdev->FlowControl == TxOnly ||
etdev->FlowControl == Both) {
- PM_CSR_t pm_csr;
+ u32 pm_csr;
/* Tell the device to send a pause packet via
* the back pressure register
*/
- pm_csr.value =
- readl(&iomem->global.pm_csr.value);
- if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ pm_csr = readl(&iomem->global.pm_csr);
+ if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) {
TXMAC_BP_CTRL_t bp_ctrl = { 0 };
bp_ctrl.bits.bp_req = 1;
@@ -351,7 +350,7 @@ void et131x_isr_handler(struct work_struct *work)
/* Handle the PHY interrupt */
if (GlobStatus.bits.phy_interrupt) {
- PM_CSR_t pm_csr;
+ u32 pm_csr;
MI_BMSR_t BmsrInts, BmsrData;
MI_ISR_t myIsr;
@@ -360,8 +359,8 @@ void et131x_isr_handler(struct work_struct *work)
/* If we are in coma mode when we get this interrupt,
* we need to disable it.
*/
- pm_csr.value = readl(&iomem->global.pm_csr.value);
- if (pm_csr.bits.pm_phy_sw_coma == 1) {
+ pm_csr = readl(&iomem->global.pm_csr);
+ if (pm_csr & ET_PM_PHY_SW_COMA) {
/*
* Check to see if we are in coma mode and if
* so, disable it because we will not be able