V4L/DVB (10506): saa7134: move tuner init code to saa7134-cards

On certain devices, before opening a tuner, we need to open the tuner
gate via i2c.

This patch just moves the tuner probing code to the same place where
such i2c commands are handled, to make easier to fix this trouble on
later patches.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

2 files changed, 24 insertions, 24 deletions

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 42684d16204..99450cbd42b 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -6197,6 +6197,30 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 	unsigned char buf;
 	int board;
 
+	/* initialize hardware #2 */
+	if (TUNER_ABSENT != dev->tuner_type) {
+		int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+
+		/* Note: radio tuner address is always filled in,
+		   so we do not need to probe for a radio tuner device. */
+		if (dev->radio_type != UNSET)
+			v4l2_i2c_new_subdev(&dev->i2c_adap,
+				"tuner", "tuner", dev->radio_addr);
+		if (has_demod)
+			v4l2_i2c_new_probed_subdev(&dev->i2c_adap, "tuner",
+				"tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		if (dev->tuner_addr == ADDR_UNSET) {
+			enum v4l2_i2c_tuner_type type =
+				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
+
+			v4l2_i2c_new_probed_subdev(&dev->i2c_adap, "tuner",
+				"tuner", v4l2_i2c_tuner_addrs(type));
+		} else {
+			v4l2_i2c_new_subdev(&dev->i2c_adap,
+				"tuner", "tuner", dev->tuner_addr);
+		}
+	}
+
 	switch (dev->board) {
 	case SAA7134_BOARD_BMK_MPEX_NOTUNER:
 	case SAA7134_BOARD_BMK_MPEX_TUNER:
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index b0f886e27c6..6a1738dccda 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -973,30 +973,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	/* wait a bit, register i2c bus */
 	msleep(100);
 	saa7134_i2c_register(dev);
-
-	/* initialize hardware #2 */
-	if (TUNER_ABSENT != dev->tuner_type) {
-		int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
-
-		/* Note: radio tuner address is always filled in,
-		   so we do not need to probe for a radio tuner device. */
-		if (dev->radio_type != UNSET)
-			v4l2_i2c_new_subdev(&dev->i2c_adap,
-				"tuner", "tuner", dev->radio_addr);
-		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&dev->i2c_adap, "tuner",
-				"tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		if (dev->tuner_addr == ADDR_UNSET) {
-			enum v4l2_i2c_tuner_type type =
-				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
-
-			v4l2_i2c_new_probed_subdev(&dev->i2c_adap, "tuner",
-				"tuner", v4l2_i2c_tuner_addrs(type));
-		} else {
-			v4l2_i2c_new_subdev(&dev->i2c_adap,
-				"tuner", "tuner", dev->tuner_addr);
-		}
-	}
 	saa7134_board_init2(dev);
 
 	saa7134_hwinit2(dev);