Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (69 commits)
  Revert "[MTD] m25p80.c code cleanup"
  [MTD] [NAND] GPIO driver depends on ARM... for now.
  [MTD] [NAND] sh_flctl: fix compile error
  [MTD] [NOR] AT49BV6416 has swapped erase regions
  [MTD] [NAND] GPIO NAND flash driver
  [MTD] cmdlineparts documentation change - explain where mtd-id comes from
  [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
  [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
  [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
  [MTD] mtdoops: Fix a bug where block may not be erased
  [MTD] mtdoops: Add a magic number to logged kernel oops
  [MTD] mtdoops: Fix an off by one error
  [JFFS2] Correct parameter names of jffs2_compress() in comments
  [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
  [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
  [MTD] [MAPS] Remove unused variable after ROM API cleanup.
  [MTD] m25p80.c extended jedec support (v2)
  [MTD] remove unused mtd parameter in of_mtd_parse_partitions()
  [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
  [MTD] [NAND] driver extension to support NAND on TQM85xx modules
  ...

1 files changed, 1 insertions, 189 deletions

diff --git a/fs/Kconfig b/fs/Kconfig
index c189089f35a..4eca61c201f 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1168,195 +1168,7 @@ config EFS_FS
 	  To compile the EFS file system support as a module, choose M here: the
 	  module will be called efs.
 
-config JFFS2_FS
-	tristate "Journalling Flash File System v2 (JFFS2) support"
-	select CRC32
-	depends on MTD
-	help
-	  JFFS2 is the second generation of the Journalling Flash File System
-	  for use on diskless embedded devices. It provides improved wear
-	  levelling, compression and support for hard links. You cannot use
-	  this on normal block devices, only on 'MTD' devices.
-
-	  Further information on the design and implementation of JFFS2 is
-	  available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
-	int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
-	depends on JFFS2_FS
-	default "0"
-	help
-	  This controls the amount of debugging messages produced by the JFFS2
-	  code. Set it to zero for use in production systems. For evaluation,
-	  testing and debugging, it's advisable to set it to one. This will
-	  enable a few assertions and will print debugging messages at the
-	  KERN_DEBUG loglevel, where they won't normally be visible. Level 2
-	  is unlikely to be useful - it enables extra debugging in certain
-	  areas which at one point needed debugging, but when the bugs were
-	  located and fixed, the detailed messages were relegated to level 2.
-
-	  If reporting bugs, please try to have available a full dump of the
-	  messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
-	bool "JFFS2 write-buffering support"
-	depends on JFFS2_FS
-	default y
-	help
-	  This enables the write-buffering support in JFFS2.
-
-	  This functionality is required to support JFFS2 on the following
-	  types of flash devices:
-	    - NAND flash
-	    - NOR flash with transparent ECC
-	    - DataFlash
-
-config JFFS2_FS_WBUF_VERIFY
-	bool "Verify JFFS2 write-buffer reads"
-	depends on JFFS2_FS_WRITEBUFFER
-	default n
-	help
-	  This causes JFFS2 to read back every page written through the
-	  write-buffer, and check for errors.
-
-config JFFS2_SUMMARY
-	bool "JFFS2 summary support (EXPERIMENTAL)"
-	depends on JFFS2_FS && EXPERIMENTAL
-	default n
-	help
-	  This feature makes it possible to use summary information
-	  for faster filesystem mount.
-
-	  The summary information can be inserted into a filesystem image
-	  by the utility 'sumtool'.
-
-	  If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
-	bool "JFFS2 XATTR support (EXPERIMENTAL)"
-	depends on JFFS2_FS && EXPERIMENTAL
-	default n
-	help
-	  Extended attributes are name:value pairs associated with inodes by
-	  the kernel or by users (see the attr(5) manual page, or visit
-	  <http://acl.bestbits.at/> for details).
-
-	  If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
-	bool "JFFS2 POSIX Access Control Lists"
-	depends on JFFS2_FS_XATTR
-	default y
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
-	bool "JFFS2 Security Labels"
-	depends on JFFS2_FS_XATTR
-	default y
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the jffs2 filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
-	bool "Advanced compression options for JFFS2"
-	depends on JFFS2_FS
-	default n
-	help
-	  Enabling this option allows you to explicitly choose which
-	  compression modules, if any, are enabled in JFFS2. Removing
-	  compressors can mean you cannot read existing file systems,
-	  and enabling experimental compressors can mean that you
-	  write a file system which cannot be read by a standard kernel.
-
-	  If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
-	bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	depends on JFFS2_FS
-	default y
-	help
-	  Zlib is designed to be a free, general-purpose, legally unencumbered,
-	  lossless data-compression library for use on virtually any computer
-	  hardware and operating system. See <http://www.gzip.org/zlib/> for
-	  further information.
-
-	  Say 'Y' if unsure.
-
-config JFFS2_LZO
-	bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
-	select LZO_COMPRESS
-	select LZO_DECOMPRESS
-	depends on JFFS2_FS
-	default n
-	help
-	  minilzo-based compression. Generally works better than Zlib.
-
-	  This feature was added in July, 2007. Say 'N' if you need
-	  compatibility with older bootloaders or kernels.
-
-config JFFS2_RTIME
-	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
-	depends on JFFS2_FS
-	default y
-	help
-	  Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
-	bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
-	depends on JFFS2_FS
-	default n
-	help
-	  RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
-	prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-	default JFFS2_CMODE_PRIORITY
-	depends on JFFS2_FS
-	help
-	  You can set here the default compression mode of JFFS2 from
-	  the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
-	bool "no compression"
-	help
-	  Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
-	bool "priority"
-	help
-	  Tries the compressors in a predefined order and chooses the first
-	  successful one.
-
-config JFFS2_CMODE_SIZE
-	bool "size (EXPERIMENTAL)"
-	help
-	  Tries all compressors and chooses the one which has the smallest
-	  result.
-
-config JFFS2_CMODE_FAVOURLZO
-	bool "Favour LZO"
-	help
-	  Tries all compressors and chooses the one which has the smallest
-	  result but gives some preference to LZO (which has faster
-	  decompression) at the expense of size.
-
-endchoice
-
+source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"