[ARM] 4143/1: AT91: Prepare for AT91SAM9263 support

The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.

These changes are:
      * The system peripheral I/O region we remap has increased from
        0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
      * The increased I/O region forces changes to entry-macro.S and
        debug-macro.S due to ARM's limited immediate offset addressing
        modes.
      * Maximum number of GPIO banks increases to 5.
      * 2 MMC controllers so the board-setup code needs to specify which
        controller it wishes to use when calling at91_add_device_mmc().

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 files changed, 56 insertions, 46 deletions

diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
index 573e97a47d2..aacb1e97642 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -18,7 +18,7 @@
 #define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
 #define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
 #define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
 #define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index bf1afd0081b..7b9903c2c44 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -60,7 +60,7 @@ struct at91_mmc_data {
 	u8		wp_pin;		/* (SD) writeprotect detect */
 	u8		vcc_pin;	/* power switching (high == on) */
 };
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
  /* Ethernet */
 struct at91_eth_data {
@@ -76,6 +76,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
  /* USB Host */
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
index 20721ef1ed1..13e9f5e1d4f 100644
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ b/include/asm-arm/arch-at91/debug-macro.S
@@ -16,24 +16,24 @@
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
-	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
 	.endm
 
 	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
 	beq	1001b
 	.endm
 
 	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
 	beq	1001b
 	.endm
 
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
index a6f33832a17..76c8cccf73a 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -17,10 +17,10 @@
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
 	.endm
 
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
index 6d1a5eb3470..256f9b200ab 100644
--- a/include/asm-arm/arch-at91/gpio.h
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -17,7 +17,7 @@
 
 #define PIN_BASE		NR_AIC_IRQS
 
-#define MAX_GPIO_BANKS		4
+#define MAX_GPIO_BANKS		5
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
@@ -26,37 +26,31 @@
 #define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
 #define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
 #define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-
 #define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
 #define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
 #define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
 #define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
 #define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-
 #define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
 #define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
 #define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
 #define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
 #define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-
 #define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
 #define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
 #define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
 #define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
 #define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-
 #define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
 #define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
 #define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
 #define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
 #define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-
 #define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
 #define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
 #define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
 #define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
 #define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-
 #define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
 #define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
 
@@ -65,37 +59,31 @@
 #define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
 #define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
 #define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-
 #define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
 #define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
 #define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
 #define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
 #define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-
 #define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
 #define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
 #define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
 #define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
 #define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-
 #define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
 #define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
 #define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
 #define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
 #define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-
 #define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
 #define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
 #define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
 #define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
 #define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-
 #define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
 #define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
 #define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
 #define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
 #define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-
 #define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
 #define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
 
@@ -104,37 +92,31 @@
 #define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
 #define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
 #define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-
 #define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
 #define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
 #define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
 #define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
 #define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-
 #define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
 #define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
 #define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
 #define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
 #define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-
 #define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
 #define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
 #define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
 #define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
 #define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-
 #define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
 #define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
 #define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
 #define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
 #define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-
 #define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
 #define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
 #define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
 #define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
 #define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-
 #define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
 #define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
 
@@ -143,40 +125,67 @@
 #define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
 #define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
 #define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-
 #define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
 #define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
 #define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
 #define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
 #define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-
 #define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
 #define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
 #define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
 #define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
 #define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-
 #define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
 #define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
 #define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
 #define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
 #define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-
 #define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
 #define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
 #define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
 #define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
 #define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-
 #define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
 #define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
 #define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
 #define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
 #define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-
 #define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
 #define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
 
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
 #ifndef __ASSEMBLY__
 /* setup setup routines, called from board init or driver probe() */
 extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index ccb7c7285b4..1637fc4a0d8 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -28,15 +28,15 @@
 
 
 /*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (5444Kb)
  */
-#define AT91_IO_PHYS_BASE	0xFFFA0000
+#define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 #define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
 
  /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
 
 /*
  * Virtual to Physical Address mapping for IO devices.
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
index f041c98c533..1ffa3bb9a9c 100644
--- a/include/asm-arm/arch-at91/irqs.h
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -37,8 +37,8 @@
  * IRQ interrupt symbols are the AT91xxx_ID_* symbols
  * for IRQs handled directly through the AIC, or else the AT91_PIN_*
  * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
+ * We make provision for 5 banks of GPIO.
  */
-#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
 
 #endif