Blackfin arch: initial supporting for BF548-EZKIT

The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia
applications where system performance and cost are essential ingredients. The
integration of multimedia, human interface, and connectivity peripherals combined
with increased system bandwidth and on-chip memory provides customers a platform to
design the most demanding applications.

Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers
such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will
be submitted later.

Please enjoy the show.

Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 65 insertions, 19 deletions

diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 8f5d9c4d8d5..2f4afc90db1 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,34 +1,35 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
 
-#define NR_PORTS		2
+#define NR_PORTS		4
 
-#define OFFSET_THR              0x00	/* Transmit Holding register            */
-#define OFFSET_RBR              0x00	/* Receive Buffer register              */
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
-#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
 #define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
-#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_GCTL             0x08	/* Global Control Register              */
 #define OFFSET_LCR              0x0C	/* Line Control Register                */
 #define OFFSET_MCR              0x10	/* Modem Control Register               */
 #define OFFSET_LSR              0x14	/* Line Status Register                 */
 #define OFFSET_MSR              0x18	/* Modem Status Register                */
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
-#define OFFSET_GCTL             0x24	/* Global Control Register              */
+#define OFFSET_IER_SET          0x20	/* Set Interrupt Enable Register        */
+#define OFFSET_IER_CLEAR        0x24	/* Clear Interrupt Enable Register      */
+#define OFFSET_THR              0x28	/* Transmit Holding register            */
+#define OFFSET_RBR              0x2C	/* Receive Buffer register              */
 
 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
 #define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
+#define UART_CLEAR_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LSR(uart,v)	bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
@@ -112,9 +113,29 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	CONFIG_UART1_CTS_PIN,
-	CONFIG_UART1_RTS_PIN,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	{
+	0xFFC02100,
+	IRQ_UART2_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART2_TX,
+	CH_UART2_RX,
+#endif
+#ifdef CONFIG_BFIN_UART2_CTSRTS
+	CONFIG_UART2_CTS_PIN,
+	CONFIG_UART2_RTS_PIN,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	{
+	0xFFC03100,
+	IRQ_UART3_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART3_TX,
+	CH_UART3_RX,
 #endif
 	},
 #endif
@@ -124,15 +145,40 @@ int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
-	unsigned short val;
-	val = bfin_read16(BFIN_PORT_MUX);
-	val &= ~(PFDE | PFTE);
-	bfin_write16(BFIN_PORT_MUX, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	/* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
+	bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
+	bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	/* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
+	bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
+	bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	/* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
+	bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
+	bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+#endif
+#endif
 
-	val = bfin_read16(PORTF_FER);
-	val |= 0xF;
-	bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	/* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
+	bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+#endif
 
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	/* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
+	bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	/* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
+	bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+#endif
+#endif
+	SSYNC();
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
 		gpio_request(uart->cts_pin, NULL);