[PATCH] powerpc: Merge asm-ppc*/dma.h

This merges the asm-ppc*/dma.h files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 390 insertions, 0 deletions

diff --git a/include/asm-powerpc/dma.h b/include/asm-powerpc/dma.h
new file mode 100644
index 00000000000..926378d2cd9
--- /dev/null
+++ b/include/asm-powerpc/dma.h
@@ -0,0 +1,390 @@
+#ifndef _ASM_POWERPC_DMA_H
+#define _ASM_POWERPC_DMA_H
+
+/*
+ * Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ */
+
+/*
+ * Note: Adapted for PowerPC by Gary Thomas
+ * Modified by Cort Dougan <cort@cs.nmt.edu>
+ *
+ * None of this really applies for Power Macintoshes.  There is
+ * basically just enough here to get kernel/dma.c to compile.
+ *
+ * There may be some comments or restrictions made here which are
+ * not valid for the PReP platform.  Take what you read
+ * with a grain of salt.
+ */
+
+#include <linux/config.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS		(~0UL)
+
+#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+/* see prep_setup_arch() for detailed informations */
+#if defined(CONFIG_SOUND_CS4232) && defined(CONFIG_PPC_PREP)
+extern long ppc_cs4232_dma, ppc_cs4232_dma2;
+#define SND_DMA1 ppc_cs4232_dma
+#define SND_DMA2 ppc_cs4232_dma2
+#else
+#define SND_DMA1 -1
+#define SND_DMA2 -1
+#endif
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09	/* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
+#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2	/* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
+#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00	/* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01	/* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_LO_PAGE_0		0x87	/* DMA page registers */
+#define DMA_LO_PAGE_1		0x83
+#define DMA_LO_PAGE_2		0x81
+#define DMA_LO_PAGE_3		0x82
+#define DMA_LO_PAGE_5		0x8B
+#define DMA_LO_PAGE_6		0x89
+#define DMA_LO_PAGE_7		0x8A
+
+#define DMA_HI_PAGE_0		0x487	/* DMA page registers */
+#define DMA_HI_PAGE_1		0x483
+#define DMA_HI_PAGE_2		0x481
+#define DMA_HI_PAGE_3		0x482
+#define DMA_HI_PAGE_5		0x48B
+#define DMA_HI_PAGE_6		0x489
+#define DMA_HI_PAGE_7		0x48A
+
+#define DMA1_EXT_REG		0x40B
+#define DMA2_EXT_REG		0x4D6
+
+#ifndef __powerpc64__
+    /* in arch/ppc/kernel/setup.c -- Cort */
+    extern unsigned int DMA_MODE_WRITE;
+    extern unsigned int DMA_MODE_READ;
+    extern unsigned long ISA_DMA_THRESHOLD;
+#else
+    #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+    #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#endif
+
+#define DMA_MODE_CASCADE	0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT		0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	unsigned char ucDmaCmd = 0x00;
+
+	if (dmanr != 4) {
+		dma_outb(0, DMA2_MASK_REG);	/* This may not be enabled */
+		dma_outb(ucDmaCmd, DMA2_CMD_REG);	/* Enable group */
+	}
+	if (dmanr <= 3) {
+		dma_outb(dmanr, DMA1_MASK_REG);
+		dma_outb(ucDmaCmd, DMA1_CMD_REG);	/* Enable group */
+	} else {
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+	}
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_LO_PAGE_0);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_LO_PAGE_1);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_LO_PAGE_2);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_LO_PAGE_3);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
+		break;
+	case 5:
+		if (SND_DMA1 == 5 || SND_DMA2 == 5)
+			dma_outb(pagenr, DMA_LO_PAGE_5);
+		else
+			dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
+		break;
+	case 6:
+		if (SND_DMA1 == 6 || SND_DMA2 == 6)
+			dma_outb(pagenr, DMA_LO_PAGE_6);
+		else
+			dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
+		break;
+	case 7:
+		if (SND_DMA1 == 7 || SND_DMA2 == 7)
+			dma_outb(pagenr, DMA_LO_PAGE_7);
+		else
+			dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
+		break;
+	}
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+	if (dmanr <= 3) {
+		dma_outb(phys & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((phys >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	} else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
+		dma_outb(phys & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 8) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((dmanr & 3), DMA2_EXT_REG);
+	} else {
+		dma_outb((phys >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+	set_dma_page(dmanr, phys >> 16);
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3) {
+		dma_outb(count & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+	} else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
+		dma_outb(count & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	}
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr <= 3)
+	    ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+	    : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3 || dmanr == SND_DMA1 || dmanr == SND_DMA2)
+	    ? count : (count << 1);
+}
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif	/* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
+
+#endif	/* _ASM_POWERPC_DMA_H */