aboutsummaryrefslogtreecommitdiff
path: root/include/asm-powerpc
diff options
context:
space:
mode:
authorLi Yang <leoli@freescale.com>2006-10-03 23:10:46 -0500
committerPaul Mackerras <paulus@samba.org>2006-10-04 15:24:27 +1000
commit9865853851313e0d94a4acde42d6f9d8070bb376 (patch)
tree0f4cca2bda6d2a21b8beb02ec2883bf328f1935c /include/asm-powerpc
parent9a1ab883c04e43f9f9819c40eb435bcdc4136193 (diff)
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and QE management and library code that are used by QE devices drivers. Includes Leo's modifications up to, and including, the platform_device to of_device adaptation: "The series of patches add generic QE infrastructure called qe_lib, and MPC8360EMDS board support. Qe_lib is used by QE device drivers such as ucc_geth driver. This version updates QE interrupt controller to use new irq mapping mechanism, addresses all the comments received with last submission and includes some style fixes. v2: Change to use device tree for BCSR and MURAM; Remove I/O port interrupt handling code as it is not generic enough. v3: Address comments from Kumar; Update definition of several device tree nodes; Copyright style change." In addition, the following changes have been made: o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o fixed qe_snums_init() serial num assignment to use a const array o made CONFIG_UCC_FAST select UCC_SLOW o reduced NR_QE_IC_INTS from 128 to 64 o remove _IO_BASE, etc. defines (not used) o removed irrelevant comments, added others to resemble removed BD_ defines o realigned struct definitions in headers o various other style fixes including things like pinMask -> pin_mask o fixed a ton of whitespace issues o marked ioregs as __be32/__be16 o removed platform_device code and redundant get_qe_base() o removed redundant comments o added cpu_relax() to qe_reset o uncasted all get_property() assignments o eliminated unneeded casts o eliminated immrbar_phys_to_virt (not used) Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'include/asm-powerpc')
-rw-r--r--include/asm-powerpc/immap_qe.h477
-rw-r--r--include/asm-powerpc/qe.h457
-rw-r--r--include/asm-powerpc/qe_ic.h64
-rw-r--r--include/asm-powerpc/ucc.h84
-rw-r--r--include/asm-powerpc/ucc_fast.h243
-rw-r--r--include/asm-powerpc/ucc_slow.h289
6 files changed, 1614 insertions, 0 deletions
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
new file mode 100644
index 00000000000..ce12f85fff9
--- /dev/null
+++ b/include/asm-powerpc/immap_qe.h
@@ -0,0 +1,477 @@
+/*
+ * include/asm-powerpc/immap_qe.h
+ *
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+ __be32 iadd; /* I-RAM Address Register */
+ __be32 idata; /* I-RAM Data Register */
+ u8 res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+ __be32 qicr;
+ __be32 qivec;
+ __be32 qripnr;
+ __be32 qipnr;
+ __be32 qipxcc;
+ __be32 qipycc;
+ __be32 qipwcc;
+ __be32 qipzcc;
+ __be32 qimr;
+ __be32 qrimr;
+ __be32 qicnr;
+ u8 res0[0x4];
+ __be32 qiprta;
+ __be32 qiprtb;
+ u8 res1[0x4];
+ __be32 qricr;
+ u8 res2[0x20];
+ __be32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+ __be32 cecr; /* QE command register */
+ __be32 ceccr; /* QE controller configuration register */
+ __be32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ __be16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ __be16 cetmr; /* QE timers mask register */
+ __be32 cetscr; /* QE time-stamp timer control register */
+ __be32 cetsr1; /* QE time-stamp register 1 */
+ __be32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ __be32 cevter; /* QE virtual tasks event register */
+ __be32 cevtmr; /* QE virtual tasks mask register */
+ __be16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ __be16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ __be16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ __be16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ __be16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ __be16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ __be16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ __be16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ __be16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+ __be32 cmxgcr; /* CMX general clock route register */
+ __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ __be32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ __be32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ __be32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ __be32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ __be32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
+ u8 res1[0xB];
+ __be16 gtmdr1; /* Timer 1 mode register */
+ __be16 gtmdr2; /* Timer 2 mode register */
+ __be16 gtrfr1; /* Timer 1 reference register */
+ __be16 gtrfr2; /* Timer 2 reference register */
+ __be16 gtcpr1; /* Timer 1 capture register */
+ __be16 gtcpr2; /* Timer 2 capture register */
+ __be16 gtcnr1; /* Timer 1 counter */
+ __be16 gtcnr2; /* Timer 2 counter */
+ __be16 gtmdr3; /* Timer 3 mode register */
+ __be16 gtmdr4; /* Timer 4 mode register */
+ __be16 gtrfr3; /* Timer 3 reference register */
+ __be16 gtrfr4; /* Timer 4 reference register */
+ __be16 gtcpr3; /* Timer 3 capture register */
+ __be16 gtcpr4; /* Timer 4 capture register */
+ __be16 gtcnr3; /* Timer 3 counter */
+ __be16 gtcnr4; /* Timer 4 counter */
+ __be16 gtevr1; /* Timer 1 event register */
+ __be16 gtevr2; /* Timer 2 event register */
+ __be16 gtevr3; /* Timer 3 event register */
+ __be16 gtevr4; /* Timer 4 event register */
+ __be16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+ __be32 brgc1; /* BRG1 configuration register */
+ __be32 brgc2; /* BRG2 configuration register */
+ __be32 brgc3; /* BRG3 configuration register */
+ __be32 brgc4; /* BRG4 configuration register */
+ __be32 brgc5; /* BRG5 configuration register */
+ __be32 brgc6; /* BRG6 configuration register */
+ __be32 brgc7; /* BRG7 configuration register */
+ __be32 brgc8; /* BRG8 configuration register */
+ __be32 brgc9; /* BRG9 configuration register */
+ __be32 brgc10; /* BRG10 configuration register */
+ __be32 brgc11; /* BRG11 configuration register */
+ __be32 brgc12; /* BRG12 configuration register */
+ __be32 brgc13; /* BRG13 configuration register */
+ __be32 brgc14; /* BRG14 configuration register */
+ __be32 brgc15; /* BRG15 configuration register */
+ __be32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+ u8 res0[0x20];
+ __be32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ __be32 spitd; /* SPI transmit data register (cpu mode) */
+ __be32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+ __be16 siamr1; /* SI1 TDMA mode register */
+ __be16 sibmr1; /* SI1 TDMB mode register */
+ __be16 sicmr1; /* SI1 TDMC mode register */
+ __be16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ __be16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ __be16 siemr1; /* SI1 TDME mode register 16 bits */
+ __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ __be32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep1;
+ __be16 usb_usep2;
+ __be16 usb_usep3;
+ __be16 usb_usep4;
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+ __be32 mcce; /* MCC event register */
+ __be32 mccm; /* MCC mask register */
+ __be32 mccf; /* MCC configuration register */
+ __be32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+ __be32 gumr_l; /* UCCx general mode register (low) */
+ __be32 gumr_h; /* UCCx general mode register (high) */
+ __be16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ __be16 utodr; /* UCCx transmit on demand register */
+ __be16 udsr; /* UCCx data synchronization register */
+ __be16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ __be16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ __be16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+ __be32 gumr; /* UCCx general mode register */
+ __be32 upsmr; /* UCCx protocol-specific mode register */
+ __be16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ __be16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ __be32 ucce; /* UCCx event register */
+ __be32 uccm; /* UCCx mask register */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ __be32 urfb; /* UCC receive FIFO base */
+ __be16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ __be16 urfet; /* UCC receive FIFO emergency threshold */
+ __be16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ __be32 utfb; /* UCC transmit FIFO base */
+ __be16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ __be16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ __be16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ __be16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ __be32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC */
+struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed));
+
+struct ucc {
+ union {
+ struct ucc_slow slow;
+ struct ucc_fast fast;
+ struct ucc_common common;
+ };
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+ __be32 upgcr; /* UTOPIA/POS general configuration register */
+ __be32 uplpa; /* UTOPIA/POS last PHY address */
+ __be32 uphec; /* ATM HEC register */
+ __be32 upuc; /* UTOPIA/POS UCC configuration */
+ __be32 updc1; /* UTOPIA/POS device 1 configuration */
+ __be32 updc2; /* UTOPIA/POS device 2 configuration */
+ __be32 updc3; /* UTOPIA/POS device 3 configuration */
+ __be32 updc4; /* UTOPIA/POS device 4 configuration */
+ __be32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ __be32 upde1; /* UTOPIA/POS device 1 event */
+ __be32 upde2; /* UTOPIA/POS device 2 event */
+ __be32 upde3; /* UTOPIA/POS device 3 event */
+ __be32 upde4; /* UTOPIA/POS device 4 event */
+ __be16 uprp1;
+ __be16 uprp2;
+ __be16 uprp3;
+ __be16 uprp4;
+ u8 res1[0x8];
+ __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ __be32 uper1; /* Device 1 port enable register */
+ __be32 uper2; /* Device 2 port enable register */
+ __be32 uper3; /* Device 3 port enable register */
+ __be32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+ __be32 sdsr; /* Serial DMA status register */
+ __be32 sdmr; /* Serial DMA mode register */
+ __be32 sdtr1; /* SDMA system bus threshold register */
+ __be32 sdtr2; /* SDMA secondary bus threshold register */
+ __be32 sdhy1; /* SDMA system bus hysteresis register */
+ __be32 sdhy2; /* SDMA secondary bus hysteresis register */
+ __be32 sdta1; /* SDMA system bus address register */
+ __be32 sdta2; /* SDMA secondary bus address register */
+ __be32 sdtm1; /* SDMA system bus MSNUM register */
+ __be32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ __be32 sdaqr; /* SDMA address bus qualify register */
+ __be32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ __be32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+ __be32 bpdcr; /* Breakpoint debug command register */
+ __be32 bpdsr; /* Breakpoint debug status register */
+ __be32 bpdmr; /* Breakpoint debug mask register */
+ __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ __be32 bprmir; /* Breakpoint request mode immediate register */
+ __be32 bprmsr; /* Breakpoint request mode serial register */
+ __be32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed));
+
+/* RISC Special Registers (Trap and Breakpoint) */
+struct rsp {
+ u8 fixme[0x100];
+} __attribute__ ((packed));
+
+struct qe_immap {
+ struct qe_iram iram; /* I-RAM */
+ struct qe_ic_regs ic; /* Interrupt Controller */
+ struct cp_qe cp; /* Communications Processor */
+ struct qe_mux qmx; /* QE Multiplexer */
+ struct qe_timers qet; /* QE Timers */
+ struct spi spi[0x2]; /* spi */
+ struct mcc mcc; /* mcc */
+ struct qe_brg brg; /* brg */
+ struct usb_ctlr usb; /* USB */
+ struct si1 si1; /* SI */
+ u8 res11[0x800];
+ struct sir sir; /* SI Routing Tables */
+ struct ucc ucc1; /* ucc1 */
+ struct ucc ucc3; /* ucc3 */
+ struct ucc ucc5; /* ucc5 */
+ struct ucc ucc7; /* ucc7 */
+ u8 res12[0x600];
+ struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
+ struct ucc ucc2; /* ucc2 */
+ struct ucc ucc4; /* ucc4 */
+ struct ucc ucc6; /* ucc6 */
+ struct ucc ucc8; /* ucc8 */
+ u8 res13[0x600];
+ struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
+ struct sdma sdma; /* SDMA */
+ struct dbg dbg; /* Debug Space */
+ struct rsp rsp[0x2]; /* RISC Special Registers
+ (Trap and Breakpoint) */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000
+ Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+{
+ if ( ((u32)address >= (u32)qe_immr) &&
+ ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+ return (unsigned long)(address - (u32)qe_immr +
+ (u32)get_qe_base());
+ return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
new file mode 100644
index 00000000000..a62168ec535
--- /dev/null
+++ b/include/asm-powerpc/qe.h
@@ -0,0 +1,457 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Export QE common operations */
+extern void qe_reset(void);
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(u32 brg, u32 rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+u32 qe_muram_alloc(u32 size, u32 align);
+int qe_muram_free(u32 offset);
+u32 qe_muram_alloc_fixed(u32 offset, u32 size);
+void qe_muram_dump(void);
+void *qe_muram_addr(u32 offset);
+
+/* Buffer descriptors */
+struct qe_bd {
+ u16 status;
+ u16 length;
+ u32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose
+ RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+};
+
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_CLK_DUMMY,
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000b
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BMR byte order */
+#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* UPC */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC */
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+ u16 rbase; /* RX BD base address */
+ u16 tbase; /* TX BD base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ u16 mrblr; /* Rx buffer length */
+ u32 rstate; /* Rx internal state */
+ u32 rptr; /* Rx internal data pointer */
+ u16 rbptr; /* rb BD Pointer */
+ u16 rcount; /* Rx internal byte count */
+ u32 rtemp; /* Rx temp */
+ u32 tstate; /* Tx internal state */
+ u32 tptr; /* Tx internal data pointer */
+ u16 tbptr; /* Tx BD pointer */
+ u16 tcount; /* Tx byte count */
+ u32 ttemp; /* Tx temp */
+ u32 rcrc; /* temp receive CRC */
+ u32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_CRC16 0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* Slow UCC Event Register (UCCE) */
+#define UCC_SLOW_UCCE_GLR 0x1000
+#define UCC_SLOW_UCCE_GLT 0x0800
+#define UCC_SLOW_UCCE_DCC 0x0400
+#define UCC_SLOW_UCCE_FLG 0x0200
+#define UCC_SLOW_UCCE_AB 0x0200
+#define UCC_SLOW_UCCE_IDLE 0x0100
+#define UCC_SLOW_UCCE_GRA 0x0080
+#define UCC_SLOW_UCCE_TXE 0x0010
+#define UCC_SLOW_UCCE_RXF 0x0008
+#define UCC_SLOW_UCCE_CCR 0x0008
+#define UCC_SLOW_UCCE_RCH 0x0008
+#define UCC_SLOW_UCCE_BSY 0x0004
+#define UCC_SLOW_UCCE_TXB 0x0002
+#define UCC_SLOW_UCCE_TX 0x0002
+#define UCC_SLOW_UCCE_RX 0x0001
+#define UCC_SLOW_UCCE_GOV 0x0001
+#define UCC_SLOW_UCCE_GUN 0x0002
+#define UCC_SLOW_UCCE_GINT 0x0004
+#define UCC_SLOW_UCCE_IQOV 0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
+ UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
+ UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
+ UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
+ UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Function code masks */
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+static inline long IS_MURAM_ERR(const u32 offset)
+{
+ return offset > (u32) - 1000L;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
new file mode 100644
index 00000000000..e386fb7e44b
--- /dev/null
+++ b/include/asm-powerpc/qe_ic.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-powerpc/qe_ic.h
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags);
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
new file mode 100644
index 00000000000..afe3076bdc0
--- /dev/null
+++ b/include/asm-powerpc/ucc.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
+};
+
+/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
+*/
+enum ucc_pram_initial_offset {
+ UCC_PRAM_OFFSET_UCC1 = 0x8400,
+ UCC_PRAM_OFFSET_UCC2 = 0x8500,
+ UCC_PRAM_OFFSET_UCC3 = 0x8600,
+ UCC_PRAM_OFFSET_UCC4 = 0x9000,
+ UCC_PRAM_OFFSET_UCC5 = 0x8000,
+ UCC_PRAM_OFFSET_UCC6 = 0x8100,
+ UCC_PRAM_OFFSET_UCC7 = 0x8200,
+ UCC_PRAM_OFFSET_UCC8 = 0x8300
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * regs - (In) pointer to registers base for the UCC.
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed);
+
+/* ucc_init_guemr
+ * Init the Guemr register.
+ *
+ * regs - (In) pointer to registers base for the UCC.
+ */
+int ucc_init_guemr(struct ucc_common *regs);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num);
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
new file mode 100644
index 00000000000..39d1c90fd2c
--- /dev/null
+++ b/include/asm-powerpc/ucc_fast.h
@@ -0,0 +1,243 @@
+/*
+ * include/asm-powerpc/ucc_fast.h
+ *
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ u32 regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ enum ucc_fast_channel_protocol_mode mode;
+ enum ucc_fast_transparent_txrx ttx_trx;
+ enum ucc_fast_tx_encoding_method tenc;
+ enum ucc_fast_rx_decoding_method renc;
+ enum ucc_fast_transparent_tcrc tcrc;
+ enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+ struct ucc_fast_info *uf_info;
+ struct ucc_fast *uf_regs; /* a pointer to memory map of UCC regs. */
+ u32 *p_ucce; /* a pointer to the event register in memory. */
+ u32 *p_uccm; /* a pointer to the mask register in memory. */
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif /* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
new file mode 100644
index 00000000000..ca93bc99237
--- /dev/null
+++ b/include/asm-powerpc/ucc_slow.h
@@ -0,0 +1,289 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision */
+#define T_RL 0x00400000 /* retransmission limit */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost */
+#define T_RC 0x003c0000 /* retry count */
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+ /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+ /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+ /* 32-bit CCITT CRC (Ethernet and HDLC) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ struct ucc_slow *us_regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ enum ucc_slow_transparent_tcrc tcrc;
+ enum ucc_slow_channel_protocol_mode mode;
+ enum ucc_slow_diag_mode diag;
+ enum ucc_slow_tx_oversampling_rate tdcr;
+ enum ucc_slow_rx_oversampling_rate rdcr;
+ enum ucc_slow_tx_encoding_method tenc;
+ enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+ struct ucc_slow_info *us_info;
+ struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */
+ struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
+ u32 us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame */
+ u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ u8 *confBd; /* next BD for confirm after Tx */
+ u8 *tx_bd; /* next BD for new Tx request */
+ u8 *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application) */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors) */
+#endif /* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_x
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */