i386/x86_64: move headers to include/asm-x86

Move the headers to include/asm-x86 and fixup the
header install make rules

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 276 deletions

diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h
deleted file mode 100644
index 7475095c506..00000000000
--- a/include/asm-x86_64/io.h
+++ /dev/null
@@ -1,276 +0,0 @@
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
-
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
-
-#ifdef REALLY_SLOW_IO
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
-#else
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
-#endif
-
-/*
- * Talk about misusing macros..
- */
-#define __OUT1(s,x) \
-static inline void out##s(unsigned x value, unsigned short port) {
-
-#define __OUT2(s,s1,s2) \
-__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
-
-#define __OUT(s,s1,x) \
-__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
-__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \
-
-#define __IN1(s) \
-static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
-
-#define __IN2(s,s1,s2) \
-__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
-
-#define __IN(s,s1,i...) \
-__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-
-#define __INS(s) \
-static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; ins" #s \
-: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
-
-#define __OUTS(s) \
-static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; outs" #s \
-: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
-
-#define RETURN_TYPE unsigned char
-__IN(b,"")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned short
-__IN(w,"")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned int
-__IN(l,"")
-#undef RETURN_TYPE
-
-__OUT(b,"b",char)
-__OUT(w,"w",short)
-__OUT(l,,int)
-
-__INS(b)
-__INS(w)
-__INS(l)
-
-__OUTS(b)
-__OUTS(w)
-__OUTS(l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-#if defined(__KERNEL__) && defined(__x86_64__)
-
-#include <linux/vmalloc.h>
-
-#ifndef __i386__
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void * address)
-{
-	return __pa(address);
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-#endif
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-#include <asm-generic/iomap.h>
-
-extern void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags);
-
-static inline void __iomem * ioremap (unsigned long offset, unsigned long size)
-{
-	return __ioremap(offset, size, 0);
-}
-
-extern void *early_ioremap(unsigned long addr, unsigned long size);
-extern void early_iounmap(void *addr, unsigned long size);
-
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
- */
-extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
-extern void iounmap(volatile void __iomem *addr);
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
- */
-
-static inline __u8 __readb(const volatile void __iomem *addr)
-{
-	return *(__force volatile __u8 *)addr;
-}
-static inline __u16 __readw(const volatile void __iomem *addr)
-{
-	return *(__force volatile __u16 *)addr;
-}
-static __always_inline __u32 __readl(const volatile void __iomem *addr)
-{
-	return *(__force volatile __u32 *)addr;
-}
-static inline __u64 __readq(const volatile void __iomem *addr)
-{
-	return *(__force volatile __u64 *)addr;
-}
-#define readb(x) __readb(x)
-#define readw(x) __readw(x)
-#define readl(x) __readl(x)
-#define readq(x) __readq(x)
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
-#define readq_relaxed(a) readq(a)
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_readq readq
-
-#define mmiowb()
-
-static inline void __writel(__u32 b, volatile void __iomem *addr)
-{
-	*(__force volatile __u32 *)addr = b;
-}
-static inline void __writeq(__u64 b, volatile void __iomem *addr)
-{
-	*(__force volatile __u64 *)addr = b;
-}
-static inline void __writeb(__u8 b, volatile void __iomem *addr)
-{
-	*(__force volatile __u8 *)addr = b;
-}
-static inline void __writew(__u16 b, volatile void __iomem *addr)
-{
-	*(__force volatile __u16 *)addr = b;
-}
-#define writeq(val,addr) __writeq((val),(addr))
-#define writel(val,addr) __writel((val),(addr))
-#define writew(val,addr) __writew((val),(addr))
-#define writeb(val,addr) __writeb((val),(addr))
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-#define __raw_writeq writeq
-
-void __memcpy_fromio(void*,unsigned long,unsigned);
-void __memcpy_toio(unsigned long,const void*,unsigned);
-
-static inline void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
-{
-	__memcpy_fromio(to,(unsigned long)from,len);
-}
-static inline void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
-{
-	__memcpy_toio((unsigned long)to,from,len);
-}
-
-void memset_io(volatile void __iomem *a, int b, size_t c);
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-/* Nothing to do */
-
-#define dma_cache_inv(_start,_size)		do { } while (0)
-#define dma_cache_wback(_start,_size)		do { } while (0)
-#define dma_cache_wback_inv(_start,_size)	do { } while (0)
-
-#define flush_write_buffers() 
-
-extern int iommu_bio_merge;
-#define BIO_VMERGE_BOUNDARY iommu_bio_merge
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif