Merge branch 'tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/ftrace-merge

4 files changed, 172 insertions, 237 deletions

diff --git a/init/Kconfig b/init/Kconfig
index 26b5bab6f6e..69d5190918e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -101,6 +101,66 @@ config LOCALVERSION_AUTO
 
 	  which is done within the script "scripts/setlocalversion".)
 
+config HAVE_KERNEL_GZIP
+	bool
+
+config HAVE_KERNEL_BZIP2
+	bool
+
+config HAVE_KERNEL_LZMA
+	bool
+
+choice
+	prompt "Kernel compression mode"
+	default KERNEL_GZIP
+	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
+	help
+	  The linux kernel is a kind of self-extracting executable.
+	  Several compression algorithms are available, which differ
+	  in efficiency, compression and decompression speed.
+	  Compression speed is only relevant when building a kernel.
+	  Decompression speed is relevant at each boot.
+
+	  If you have any problems with bzip2 or lzma compressed
+	  kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
+	  version of this functionality (bzip2 only), for 2.4, was
+	  supplied by Christian Ludwig)
+
+	  High compression options are mostly useful for users, who
+	  are low on disk space (embedded systems), but for whom ram
+	  size matters less.
+
+	  If in doubt, select 'gzip'
+
+config KERNEL_GZIP
+	bool "Gzip"
+	depends on HAVE_KERNEL_GZIP
+	help
+	  The old and tried gzip compression. Its compression ratio is
+	  the poorest among the 3 choices; however its speed (both
+	  compression and decompression) is the fastest.
+
+config KERNEL_BZIP2
+	bool "Bzip2"
+	depends on HAVE_KERNEL_BZIP2
+	help
+	  Its compression ratio and speed is intermediate.
+	  Decompression speed is slowest among the three.  The kernel
+	  size is about 10% smaller with bzip2, in comparison to gzip.
+	  Bzip2 uses a large amount of memory. For modern kernels you
+	  will need at least 8MB RAM or more for booting.
+
+config KERNEL_LZMA
+	bool "LZMA"
+	depends on HAVE_KERNEL_LZMA
+	help
+	  The most recent compression algorithm.
+	  Its ratio is best, decompression speed is between the other
+	  two. Compression is slowest.	The kernel size is about 33%
+	  smaller with LZMA in comparison to gzip.
+
+endchoice
+
 config SWAP
 	bool "Support for paging of anonymous memory (swap)"
 	depends on MMU && BLOCK
@@ -675,6 +735,9 @@ config CC_OPTIMIZE_FOR_SIZE
 config SYSCTL
 	bool
 
+config ANON_INODES
+	bool
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -780,18 +843,6 @@ config PCSPKR_PLATFORM
           This option allows to disable the internal PC-Speaker
           support, saving some memory.
 
-config COMPAT_BRK
-	bool "Disable heap randomization"
-	default y
-	help
-	  Randomizing heap placement makes heap exploits harder, but it
-	  also breaks ancient binaries (including anything libc5 based).
-	  This option changes the bootup default to heap randomization
-	  disabled, and can be overriden runtime by setting
-	  /proc/sys/kernel/randomize_va_space to 2.
-
-	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
 config BASE_FULL
 	default y
 	bool "Enable full-sized data structures for core" if EMBEDDED
@@ -809,9 +860,6 @@ config FUTEX
 	  support for "fast userspace mutexes".  The resulting kernel may not
 	  run glibc-based applications correctly.
 
-config ANON_INODES
-	bool
-
 config EPOLL
 	bool "Enable eventpoll support" if EMBEDDED
 	default y
@@ -897,6 +945,18 @@ config SLUB_DEBUG
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config COMPAT_BRK
+	bool "Disable heap randomization"
+	default y
+	help
+	  Randomizing heap placement makes heap exploits harder, but it
+	  also breaks ancient binaries (including anything libc5 based).
+	  This option changes the bootup default to heap randomization
+	  disabled, and can be overriden runtime by setting
+	  /proc/sys/kernel/randomize_va_space to 2.
+
+	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
 choice
 	prompt "Choose SLAB allocator"
 	default SLUB
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 0f0f0cf3ba9..027a402708d 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -11,6 +11,9 @@
 #include "do_mounts.h"
 #include "../fs/squashfs/squashfs_fs.h"
 
+#include <linux/decompress/generic.h>
+
+
 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
 
 static int __init prompt_ramdisk(char *str)
@@ -29,7 +32,7 @@ static int __init ramdisk_start_setup(char *str)
 }
 __setup("ramdisk_start=", ramdisk_start_setup);
 
-static int __init crd_load(int in_fd, int out_fd);
+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
 
 /*
  * This routine tries to find a RAM disk image to load, and returns the
@@ -38,15 +41,15 @@ static int __init crd_load(int in_fd, int out_fd);
  * numbers could not be found.
  *
  * We currently check for the following magic numbers:
- * 	minix
- * 	ext2
+ *	minix
+ *	ext2
  *	romfs
  *	cramfs
  *	squashfs
- * 	gzip
+ *	gzip
  */
-static int __init 
-identify_ramdisk_image(int fd, int start_block)
+static int __init
+identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 {
 	const int size = 512;
 	struct minix_super_block *minixsb;
@@ -56,6 +59,7 @@ identify_ramdisk_image(int fd, int start_block)
 	struct squashfs_super_block *squashfsb;
 	int nblocks = -1;
 	unsigned char *buf;
+	const char *compress_name;
 
 	buf = kmalloc(size, GFP_KERNEL);
 	if (!buf)
@@ -69,18 +73,19 @@ identify_ramdisk_image(int fd, int start_block)
 	memset(buf, 0xe5, size);
 
 	/*
-	 * Read block 0 to test for gzipped kernel
+	 * Read block 0 to test for compressed kernel
 	 */
 	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
 	sys_read(fd, buf, size);
 
-	/*
-	 * If it matches the gzip magic numbers, return 0
-	 */
-	if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
-		printk(KERN_NOTICE
-		       "RAMDISK: Compressed image found at block %d\n",
-		       start_block);
+	*decompressor = decompress_method(buf, size, &compress_name);
+	if (compress_name) {
+		printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n",
+		       compress_name, start_block);
+		if (!*decompressor)
+			printk(KERN_EMERG
+			       "RAMDISK: %s decompressor not configured!\n",
+			       compress_name);
 		nblocks = 0;
 		goto done;
 	}
@@ -142,7 +147,7 @@ identify_ramdisk_image(int fd, int start_block)
 	printk(KERN_NOTICE
 	       "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
 	       start_block);
-	
+
 done:
 	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
 	kfree(buf);
@@ -157,6 +162,7 @@ int __init rd_load_image(char *from)
 	int nblocks, i, disk;
 	char *buf = NULL;
 	unsigned short rotate = 0;
+	decompress_fn decompressor = NULL;
 #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES)
 	char rotator[4] = { '|' , '/' , '-' , '\\' };
 #endif
@@ -169,12 +175,12 @@ int __init rd_load_image(char *from)
 	if (in_fd < 0)
 		goto noclose_input;
 
-	nblocks = identify_ramdisk_image(in_fd, rd_image_start);
+	nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
 	if (nblocks < 0)
 		goto done;
 
 	if (nblocks == 0) {
-		if (crd_load(in_fd, out_fd) == 0)
+		if (crd_load(in_fd, out_fd, decompressor) == 0)
 			goto successful_load;
 		goto done;
 	}
@@ -200,7 +206,7 @@ int __init rd_load_image(char *from)
 		       nblocks, rd_blocks);
 		goto done;
 	}
-		
+
 	/*
 	 * OK, time to copy in the data
 	 */
@@ -273,138 +279,48 @@ int __init rd_load_disk(int n)
 	return rd_load_image("/dev/root");
 }
 
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-
-#ifndef memzero
-#define memzero(s, n)     memset ((s), 0, (n))
-#endif
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define INBUFSIZ 4096
-#define WSIZE 0x8000    /* window size--must be a power of two, and */
-			/*  at least 32K for zip's deflate method */
-
-static uch *inbuf;
-static uch *window;
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
 static int exit_code;
-static int unzip_error;
-static long bytes_out;
+static int decompress_error;
 static int crd_infd, crd_outfd;
 
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-		
-/* Diagnostic functions (stubbed out) */
-#define Assert(cond,msg)
-#define Trace(x)
-#define Tracev(x)
-#define Tracevv(x)
-#define Tracec(c,x)
-#define Tracecv(c,x)
-
-#define STATIC static
-#define INIT __init
-
-static int  __init fill_inbuf(void);
-static void __init flush_window(void);
-static void __init error(char *m);
-
-#define NO_INFLATE_MALLOC
-
-#include "../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- * Returning -1 does not guarantee that gunzip() will ever return.
- */
-static int __init fill_inbuf(void)
+static int __init compr_fill(void *buf, unsigned int len)
 {
-	if (exit_code) return -1;
-	
-	insize = sys_read(crd_infd, inbuf, INBUFSIZ);
-	if (insize == 0) {
-		error("RAMDISK: ran out of compressed data");
-		return -1;
-	}
-
-	inptr = 1;
-
-	return inbuf[0];
+	int r = sys_read(crd_infd, buf, len);
+	if (r < 0)
+		printk(KERN_ERR "RAMDISK: error while reading compressed data");
+	else if (r == 0)
+		printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
+	return r;
 }
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void __init flush_window(void)
+static int __init compr_flush(void *window, unsigned int outcnt)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n, written;
-    uch *in, ch;
-    
-    written = sys_write(crd_outfd, window, outcnt);
-    if (written != outcnt && unzip_error == 0) {
-	printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
-	       written, outcnt, bytes_out);
-	unzip_error = 1;
-    }
-    in = window;
-    for (n = 0; n < outcnt; n++) {
-	    ch = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    outcnt = 0;
+	int written = sys_write(crd_outfd, window, outcnt);
+	if (written != outcnt) {
+		if (decompress_error == 0)
+			printk(KERN_ERR
+			       "RAMDISK: incomplete write (%d != %d)\n",
+			       written, outcnt);
+		decompress_error = 1;
+		return -1;
+	}
+	return outcnt;
 }
 
 static void __init error(char *x)
 {
 	printk(KERN_ERR "%s\n", x);
 	exit_code = 1;
-	unzip_error = 1;
+	decompress_error = 1;
 }
 
-static int __init crd_load(int in_fd, int out_fd)
+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
 {
 	int result;
-
-	insize = 0;		/* valid bytes in inbuf */
-	inptr = 0;		/* index of next byte to be processed in inbuf */
-	outcnt = 0;		/* bytes in output buffer */
-	exit_code = 0;
-	bytes_out = 0;
-	crc = (ulg)0xffffffffL; /* shift register contents */
-
 	crd_infd = in_fd;
 	crd_outfd = out_fd;
-	inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
-	if (!inbuf) {
-		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
-		return -1;
-	}
-	window = kmalloc(WSIZE, GFP_KERNEL);
-	if (!window) {
-		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
-		kfree(inbuf);
-		return -1;
-	}
-	makecrc();
-	result = gunzip();
-	if (unzip_error)
+	result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error);
+	if (decompress_error)
 		result = 1;
-	kfree(inbuf);
-	kfree(window);
 	return result;
 }
diff --git a/init/initramfs.c b/init/initramfs.c
index d9c941c0c3c..7dcde7ea660 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -390,11 +390,13 @@ static int __init write_buffer(char *buf, unsigned len)
 	return len - count;
 }
 
-static void __init flush_buffer(char *buf, unsigned len)
+static int __init flush_buffer(void *bufv, unsigned len)
 {
+	char *buf = (char *) bufv;
 	int written;
+	int origLen = len;
 	if (message)
-		return;
+		return -1;
 	while ((written = write_buffer(buf, len)) < len && !message) {
 		char c = buf[written];
 		if (c == '0') {
@@ -408,84 +410,28 @@ static void __init flush_buffer(char *buf, unsigned len)
 		} else
 			error("junk in compressed archive");
 	}
+	return origLen;
 }
 
-/*
- * gzip declarations
- */
+static unsigned my_inptr;   /* index of next byte to be processed in inbuf */
 
-#define OF(args)  args
-
-#ifndef memzero
-#define memzero(s, n)     memset ((s), 0, (n))
-#endif
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000    /* window size--must be a power of two, and */
-			/*  at least 32K for zip's deflate method */
-
-static uch *inbuf;
-static uch *window;
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
-static long bytes_out;
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : -1)
-		
-/* Diagnostic functions (stubbed out) */
-#define Assert(cond,msg)
-#define Trace(x)
-#define Tracev(x)
-#define Tracevv(x)
-#define Tracec(c,x)
-#define Tracecv(c,x)
-
-#define STATIC static
-#define INIT __init
-
-static void __init flush_window(void);
-static void __init error(char *m);
-
-#define NO_INFLATE_MALLOC
-
-#include "../lib/inflate.c"
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void __init flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, ch;
-
-	flush_buffer(window, outcnt);
-	in = window;
-	for (n = 0; n < outcnt; n++) {
-		ch = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	outcnt = 0;
-}
+#include <linux/decompress/generic.h>
 
 static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
 {
 	int written;
+	decompress_fn decompress;
+	const char *compress_name;
+	static __initdata char msg_buf[64];
+
 	dry_run = check_only;
 	header_buf = kmalloc(110, GFP_KERNEL);
 	symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL);
 	name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL);
-	window = kmalloc(WSIZE, GFP_KERNEL);
-	if (!window || !header_buf || !symlink_buf || !name_buf)
+
+	if (!header_buf || !symlink_buf || !name_buf)
 		panic("can't allocate buffers");
+
 	state = Start;
 	this_header = 0;
 	message = NULL;
@@ -505,22 +451,25 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
 			continue;
 		}
 		this_header = 0;
-		insize = len;
-		inbuf = buf;
-		inptr = 0;
-		outcnt = 0;		/* bytes in output buffer */
-		bytes_out = 0;
-		crc = (ulg)0xffffffffL; /* shift register contents */
-		makecrc();
-		gunzip();
+		decompress = decompress_method(buf, len, &compress_name);
+		if (decompress)
+			decompress(buf, len, NULL, flush_buffer, NULL,
+				   &my_inptr, error);
+		else if (compress_name) {
+			if (!message) {
+				snprintf(msg_buf, sizeof msg_buf,
+					 "compression method %s not configured",
+					 compress_name);
+				message = msg_buf;
+			}
+		}
 		if (state != Reset)
-			error("junk in gzipped archive");
-		this_header = saved_offset + inptr;
-		buf += inptr;
-		len -= inptr;
+			error("junk in compressed archive");
+		this_header = saved_offset + my_inptr;
+		buf += my_inptr;
+		len -= my_inptr;
 	}
 	dir_utime();
-	kfree(window);
 	kfree(name_buf);
 	kfree(symlink_buf);
 	kfree(header_buf);
@@ -579,7 +528,7 @@ static int __init populate_rootfs(void)
 	char *err = unpack_to_rootfs(__initramfs_start,
 			 __initramfs_end - __initramfs_start, 0);
 	if (err)
-		panic(err);
+		panic(err);	/* Failed to decompress INTERNAL initramfs */
 	if (initrd_start) {
 #ifdef CONFIG_BLK_DEV_RAM
 		int fd;
@@ -605,9 +554,12 @@ static int __init populate_rootfs(void)
 		printk(KERN_INFO "Unpacking initramfs...");
 		err = unpack_to_rootfs((char *)initrd_start,
 			initrd_end - initrd_start, 0);
-		if (err)
-			panic(err);
-		printk(" done\n");
+		if (err) {
+			printk(" failed!\n");
+			printk(KERN_EMERG "%s\n", err);
+		} else {
+			printk(" done\n");
+		}
 		free_initrd();
 #endif
 	}
diff --git a/init/main.c b/init/main.c
index 082077af7c4..20d784ab5ef 100644
--- a/init/main.c
+++ b/init/main.c
@@ -14,6 +14,7 @@
 #include <linux/proc_fs.h>
 #include <linux/kernel.h>
 #include <linux/syscalls.h>
+#include <linux/stackprotector.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
@@ -136,14 +137,14 @@ unsigned int __initdata setup_max_cpus = NR_CPUS;
  * greater than 0, limits the maximum number of CPUs activated in
  * SMP mode to <NUM>.
  */
-#ifndef CONFIG_X86_IO_APIC
-static inline void disable_ioapic_setup(void) {};
-#endif
+
+void __weak arch_disable_smp_support(void) { }
 
 static int __init nosmp(char *str)
 {
 	setup_max_cpus = 0;
-	disable_ioapic_setup();
+	arch_disable_smp_support();
+
 	return 0;
 }
 
@@ -153,14 +154,14 @@ static int __init maxcpus(char *str)
 {
 	get_option(&str, &setup_max_cpus);
 	if (setup_max_cpus == 0)
-		disable_ioapic_setup();
+		arch_disable_smp_support();
 
 	return 0;
 }
 
 early_param("maxcpus", maxcpus);
 #else
-#define setup_max_cpus NR_CPUS
+const unsigned int setup_max_cpus = NR_CPUS;
 #endif
 
 /*
@@ -541,6 +542,12 @@ asmlinkage void __init start_kernel(void)
 	 */
 	lockdep_init();
 	debug_objects_early_init();
+
+	/*
+	 * Set up the the initial canary ASAP:
+	 */
+	boot_init_stack_canary();
+
 	cgroup_init_early();
 
 	local_irq_disable();