dccp: Lockless integration of CCID congestion-control plugins

Based on Arnaldo's earlier patch, this patch integrates the standardised
CCID congestion control plugins (CCID-2 and CCID-3) of DCCP with dccp.ko:

 * enables a faster connection path by eliminating the need to always go 
   through the CCID registration lock;

 * updates the implementation to use only a single array whose size equals
   the number of configured CCIDs instead of the maximum (256);

 * since the CCIDs are now fixed array elements, synchronization is no
   longer needed, simplifying use and implementation.

CCID-2 is suggested as minimum for a basic DCCP implementation (RFC 4340, 10);
CCID-3 is a standards-track CCID supported by RFC 4342 and RFC 5348.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 25 insertions, 98 deletions

diff --git a/net/dccp/ccids/Kconfig b/net/dccp/ccids/Kconfig
index 12275943eab..b30f049cf1d 100644
--- a/net/dccp/ccids/Kconfig
+++ b/net/dccp/ccids/Kconfig
@@ -1,80 +1,52 @@
 menu "DCCP CCIDs Configuration (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 
-config IP_DCCP_CCID2
-	tristate "CCID2 (TCP-Like) (EXPERIMENTAL)"
-	def_tristate IP_DCCP
-	select IP_DCCP_ACKVEC
-	---help---
-	  CCID 2, TCP-like Congestion Control, denotes Additive Increase,
-	  Multiplicative Decrease (AIMD) congestion control with behavior
-	  modelled directly on TCP, including congestion window, slow start,
-	  timeouts, and so forth [RFC 2581].  CCID 2 achieves maximum
-	  bandwidth over the long term, consistent with the use of end-to-end
-	  congestion control, but halves its congestion window in response to
-	  each congestion event.  This leads to the abrupt rate changes
-	  typical of TCP.  Applications should use CCID 2 if they prefer
-	  maximum bandwidth utilization to steadiness of rate.  This is often
-	  the case for applications that are not playing their data directly
-	  to the user.  For example, a hypothetical application that
-	  transferred files over DCCP, using application-level retransmissions
-	  for lost packets, would prefer CCID 2 to CCID 3.  On-line games may
-	  also prefer CCID 2.  See RFC 4341 for further details.
-
-	  CCID2 is the default CCID used by DCCP.
-
 config IP_DCCP_CCID2_DEBUG
-	  bool "CCID2 debugging messages"
-	  depends on IP_DCCP_CCID2
-	  ---help---
-	    Enable CCID2-specific debugging messages.
+	bool "CCID-2 debugging messages"
+	---help---
+	  Enable CCID-2 specific debugging messages.
 
-	    When compiling CCID2 as a module, this debugging output can
-	    additionally be toggled by setting the ccid2_debug module
-	    parameter to 0 or 1.
+	  The debugging output can additionally be toggled by setting the
+	  ccid2_debug parameter to 0 or 1.
 
-	    If in doubt, say N.
+	  If in doubt, say N.
 
 config IP_DCCP_CCID3
-	tristate "CCID3 (TCP-Friendly) (EXPERIMENTAL)"
-	def_tristate IP_DCCP
+	bool "CCID-3 (TCP-Friendly) (EXPERIMENTAL)"
+	def_bool y if (IP_DCCP = y || IP_DCCP = m)
 	select IP_DCCP_TFRC_LIB
 	---help---
-	  CCID 3 denotes TCP-Friendly Rate Control (TFRC), an equation-based
+	  CCID-3 denotes TCP-Friendly Rate Control (TFRC), an equation-based
 	  rate-controlled congestion control mechanism.  TFRC is designed to
 	  be reasonably fair when competing for bandwidth with TCP-like flows,
 	  where a flow is "reasonably fair" if its sending rate is generally
 	  within a factor of two of the sending rate of a TCP flow under the
 	  same conditions.  However, TFRC has a much lower variation of
-	  throughput over time compared with TCP, which makes CCID 3 more
-	  suitable than CCID 2 for applications such streaming media where a
+	  throughput over time compared with TCP, which makes CCID-3 more
+	  suitable than CCID-2 for applications such streaming media where a
 	  relatively smooth sending rate is of importance.
 
-	  CCID 3 is further described in RFC 4342,
+	  CCID-3 is further described in RFC 4342,
 	  http://www.ietf.org/rfc/rfc4342.txt
 
 	  The TFRC congestion control algorithms were initially described in
-	  RFC 3448.
+	  RFC 5448.
 
 	  This text was extracted from RFC 4340 (sec. 10.2),
 	  http://www.ietf.org/rfc/rfc4340.txt
-	  
-	  To compile this CCID as a module, choose M here: the module will be
-	  called dccp_ccid3.
 
-	  If in doubt, say M.
+	  If in doubt, say N.
 
 config IP_DCCP_CCID3_DEBUG
-	  bool "CCID3 debugging messages"
-	  depends on IP_DCCP_CCID3
-	  ---help---
-	    Enable CCID3-specific debugging messages.
+	bool "CCID-3 debugging messages"
+	depends on IP_DCCP_CCID3
+	---help---
+	  Enable CCID-3 specific debugging messages.
 
-	    When compiling CCID3 as a module, this debugging output can
-	    additionally be toggled by setting the ccid3_debug module
-	    parameter to 0 or 1.
+	  The debugging output can additionally be toggled by setting the
+	  ccid3_debug parameter to 0 or 1.
 
-	    If in doubt, say N.
+	  If in doubt, say N.
 
 config IP_DCCP_CCID3_RTO
 	  int "Use higher bound for nofeedback timer"
diff --git a/net/dccp/ccids/Makefile b/net/dccp/ccids/Makefile
index 438f20bccff..cdaefffbb77 100644
--- a/net/dccp/ccids/Makefile
+++ b/net/dccp/ccids/Makefile
@@ -1,9 +1 @@
-obj-$(CONFIG_IP_DCCP_CCID3) += dccp_ccid3.o
-
-dccp_ccid3-y := ccid3.o
-
-obj-$(CONFIG_IP_DCCP_CCID2) += dccp_ccid2.o
-
-dccp_ccid2-y := ccid2.o
-
 obj-y += lib/
diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c
index c9ea19a4d85..d235294ace2 100644
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -768,10 +768,9 @@ static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
 	}
 }
 
-static struct ccid_operations ccid2 = {
+struct ccid_operations ccid2_ops = {
 	.ccid_id		= DCCPC_CCID2,
 	.ccid_name		= "TCP-like",
-	.ccid_owner		= THIS_MODULE,
 	.ccid_hc_tx_obj_size	= sizeof(struct ccid2_hc_tx_sock),
 	.ccid_hc_tx_init	= ccid2_hc_tx_init,
 	.ccid_hc_tx_exit	= ccid2_hc_tx_exit,
@@ -784,22 +783,5 @@ static struct ccid_operations ccid2 = {
 
 #ifdef CONFIG_IP_DCCP_CCID2_DEBUG
 module_param(ccid2_debug, bool, 0644);
-MODULE_PARM_DESC(ccid2_debug, "Enable debug messages");
+MODULE_PARM_DESC(ccid2_debug, "Enable CCID-2 debug messages");
 #endif
-
-static __init int ccid2_module_init(void)
-{
-	return ccid_register(&ccid2);
-}
-module_init(ccid2_module_init);
-
-static __exit void ccid2_module_exit(void)
-{
-	ccid_unregister(&ccid2);
-}
-module_exit(ccid2_module_exit);
-
-MODULE_AUTHOR("Andrea Bittau <a.bittau@cs.ucl.ac.uk>");
-MODULE_DESCRIPTION("DCCP TCP-Like (CCID2) CCID");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("net-dccp-ccid-2");
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 3b8bd7ca676..a27b7f4c19c 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -940,10 +940,9 @@ static int ccid3_hc_rx_getsockopt(struct sock *sk, const int optname, int len,
 	return 0;
 }
 
-static struct ccid_operations ccid3 = {
+struct ccid_operations ccid3_ops = {
 	.ccid_id		   = DCCPC_CCID3,
 	.ccid_name		   = "TCP-Friendly Rate Control",
-	.ccid_owner		   = THIS_MODULE,
 	.ccid_hc_tx_obj_size	   = sizeof(struct ccid3_hc_tx_sock),
 	.ccid_hc_tx_init	   = ccid3_hc_tx_init,
 	.ccid_hc_tx_exit	   = ccid3_hc_tx_exit,
@@ -964,23 +963,5 @@ static struct ccid_operations ccid3 = {
 
 #ifdef CONFIG_IP_DCCP_CCID3_DEBUG
 module_param(ccid3_debug, bool, 0644);
-MODULE_PARM_DESC(ccid3_debug, "Enable debug messages");
+MODULE_PARM_DESC(ccid3_debug, "Enable CCID-3 debug messages");
 #endif
-
-static __init int ccid3_module_init(void)
-{
-	return ccid_register(&ccid3);
-}
-module_init(ccid3_module_init);
-
-static __exit void ccid3_module_exit(void)
-{
-	ccid_unregister(&ccid3);
-}
-module_exit(ccid3_module_exit);
-
-MODULE_AUTHOR("Ian McDonald <ian.mcdonald@jandi.co.nz>, "
-	      "Arnaldo Carvalho de Melo <acme@ghostprotocols.net>");
-MODULE_DESCRIPTION("DCCP TFRC CCID3 CCID");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("net-dccp-ccid-3");