Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into linux-next

Conflicts:
	fs/ubifs/super.c

Merge the upstream tree in order to resolve a conflict with the
per-bdi writeback changes from the linux-2.6-block tree.

10 files changed, 483 insertions, 129 deletions

diff --git a/scripts/Makefile b/scripts/Makefile
index 9dd5b25a1d5..842dbc2d5ae 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -10,7 +10,6 @@
 hostprogs-$(CONFIG_KALLSYMS)     += kallsyms
 hostprogs-$(CONFIG_LOGO)         += pnmtologo
 hostprogs-$(CONFIG_VT)           += conmakehash
-hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
 hostprogs-$(CONFIG_IKCONFIG)     += bin2c
 
 always		:= $(hostprogs-y) $(hostprogs-m)
diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig
index 72997c353cb..de233ff43c1 100755
--- a/scripts/extract-ikconfig
+++ b/scripts/extract-ikconfig
@@ -17,6 +17,10 @@ dump_config() {
 	return
     fi
     end=`$binoffset $file $IKCFG_ED 2>/dev/null`
+    [ "$?" != "0" ] && end="-1"
+    if [ "$end" -eq "-1" ]; then
+	return
+    fi
 
     start=`expr $start + 8`
     size=`expr $end - $start`
@@ -55,6 +59,8 @@ dump_config "$image"
 GZHDR1="0x1f 0x8b 0x08 0x00"
 GZHDR2="0x1f 0x8b 0x08 0x08"
 
+ELFHDR="0x7f 0x45 0x4c 0x46"
+
 # vmlinux.gz: Check for a compressed images
 off=`$binoffset "$image" $GZHDR1 2>/dev/null`
 [ "$?" != "0" ] && off="-1"
@@ -69,6 +75,14 @@ elif [ "$off" -ne "-1" ]; then
 	(dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \
 		zcat >"$TMPFILE"
 	dump_config "$TMPFILE"
+
+# check if this is simply an ELF file
+else
+	off=`$binoffset "$image" $ELFHDR 2>/dev/null`
+	[ "$?" != "0" ] && off="-1"
+	if [ "$off" -eq "0" ]; then
+		dump_config "$image"
+	fi
 fi
 
 echo "ERROR: Unable to extract kernel configuration information."
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 3e733146cd5..278a45bd45a 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
 use strict;
 
 my $P = $0;
-my $V = '0.16';
+my $V = '0.17';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -27,6 +27,7 @@ my $email_git = 1;
 my $email_git_penguin_chiefs = 0;
 my $email_git_min_signatures = 1;
 my $email_git_max_maintainers = 5;
+my $email_git_min_percent = 5;
 my $email_git_since = "1-year-ago";
 my $output_multiline = 1;
 my $output_separator = ", ";
@@ -65,6 +66,7 @@ if (!GetOptions(
 		'git-chief-penguins!' => \$email_git_penguin_chiefs,
 		'git-min-signatures=i' => \$email_git_min_signatures,
 		'git-max-maintainers=i' => \$email_git_max_maintainers,
+		'git-min-percent=i' => \$email_git_min_percent,
 		'git-since=s' => \$email_git_since,
 		'm!' => \$email_maintainer,
 		'n!' => \$email_usename,
@@ -132,6 +134,10 @@ while (<MAINT>) {
 	    $value =~ s@\.@\\\.@g;       ##Convert . to \.
 	    $value =~ s/\*/\.\*/g;       ##Convert * to .*
 	    $value =~ s/\?/\./g;         ##Convert ? to .
+	    ##if pattern is a directory and it lacks a trailing slash, add one
+	    if ((-d $value)) {
+		$value =~ s@([^/])$@$1/@;
+	    }
 	}
 	push(@typevalue, "$type:$value");
     } elsif (!/^(\s)*$/) {
@@ -146,8 +152,10 @@ close(MAINT);
 my @files = ();
 
 foreach my $file (@ARGV) {
-    next if ((-d $file));
-    if (!(-f $file)) {
+    ##if $file is a directory and it lacks a trailing slash, add one
+    if ((-d $file)) {
+	$file =~ s@([^/])$@$1/@;
+    } elsif (!(-f $file)) {
 	die "$P: file '${file}' not found\n";
     }
     if ($from_filename) {
@@ -292,7 +300,7 @@ sub file_match_pattern {
 sub usage {
     print <<EOT;
 usage: $P [options] patchfile
-       $P [options] -f file
+       $P [options] -f file|directory
 version: $V
 
 MAINTAINER field selection options:
@@ -301,6 +309,7 @@ MAINTAINER field selection options:
     --git-chief-penguins => include ${penguin_chiefs}
     --git-min-signatures => number of signatures required (default: 1)
     --git-max-maintainers => maximum maintainers to add (default: 5)
+    --git-min-percent => minimum percentage of commits required (default: 5)
     --git-since => git history to use (default: 1-year-ago)
     --m => include maintainer(s) if any
     --n => include name 'Full Name <addr\@domain.tld>'
@@ -322,6 +331,15 @@ Other options:
   --version => show version
   --help => show this help information
 
+Notes:
+  Using "-f directory" may give unexpected results:
+
+  Used with "--git", git signators for _all_ files in and below
+     directory are examined as git recurses directories.
+     Any specified X: (exclude) pattern matches are _not_ ignored.
+  Used with "--nogit", directory is used as a pattern match,
+     no individual file within the directory or subdirectory
+     is matched.
 EOT
 }
 
@@ -482,6 +500,7 @@ sub recent_git_signoffs {
     my $output = "";
     my $count = 0;
     my @lines = ();
+    my $total_sign_offs;
 
     if (which("git") eq "") {
 	warn("$P: git not found.  Add --nogit to options?\n");
@@ -505,17 +524,26 @@ sub recent_git_signoffs {
     $output =~ s/^\s*//gm;
 
     @lines = split("\n", $output);
+
+    $total_sign_offs = 0;
+    foreach my $line (@lines) {
+	if ($line =~ m/([0-9]+)\s+(.*)/) {
+	    $total_sign_offs += $1;
+	} else {
+	    die("$P: Unexpected git output: ${line}\n");
+	}
+    }
+
     foreach my $line (@lines) {
 	if ($line =~ m/([0-9]+)\s+(.*)/) {
 	    my $sign_offs = $1;
 	    $line = $2;
 	    $count++;
 	    if ($sign_offs < $email_git_min_signatures ||
-	        $count > $email_git_max_maintainers) {
+	        $count > $email_git_max_maintainers ||
+		$sign_offs * 100 / $total_sign_offs < $email_git_min_percent) {
 		last;
 	    }
-	} else {
-	    die("$P: Unexpected git output: ${line}\n");
 	}
 	if ($line =~ m/(.+)<(.+)>/) {
 	    my $git_name = $1;
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 5ddf8becd7a..6d69c7ccdcc 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -2,7 +2,8 @@
 # Kernel configuration targets
 # These targets are used from top-level makefile
 
-PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
+PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
+	localmodconfig localyesconfig
 
 ifdef KBUILD_KCONFIG
 Kconfig := $(KBUILD_KCONFIG)
@@ -28,6 +29,35 @@ oldconfig: $(obj)/conf
 silentoldconfig: $(obj)/conf
 	$< -s $(Kconfig)
 
+localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
+	$(Q)perl $< $(Kconfig) > .tmp.config
+	$(Q)if [ -f .config ]; then 				\
+			cmp -s .tmp.config .config ||		\
+			(mv -f .config .config.old.1;		\
+			 mv -f .tmp.config .config;		\
+			 $(obj)/conf -s $(Kconfig);		\
+			 mv -f .config.old.1 .config.old)	\
+	else							\
+			mv -f .tmp.config .config;		\
+			$(obj)/conf -s $(Kconfig);		\
+	fi
+	$(Q)rm -f .tmp.config
+
+localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
+	$(Q)perl $< $(Kconfig) > .tmp.config
+	$(Q)sed -i s/=m/=y/ .tmp.config
+	$(Q)if [ -f .config ]; then 				\
+			cmp -s .tmp.config .config ||		\
+			(mv -f .config .config.old.1;		\
+			 mv -f .tmp.config .config;		\
+			 $(obj)/conf -s $(Kconfig);		\
+			 mv -f .config.old.1 .config.old)	\
+	else							\
+			mv -f .tmp.config .config;		\
+			$(obj)/conf -s $(Kconfig);		\
+	fi
+	$(Q)rm -f .tmp.config
+
 # Create new linux.pot file
 # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
 # The symlink is used to repair a deficiency in arch/um
@@ -83,6 +113,8 @@ help:
 	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
 	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
 	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
+	@echo  '  localmodconfig  - Update current config disabling modules not loaded'
+	@echo  '  localyesconfig  - Update current config converting local mods to core'
 	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  defconfig	  - New config with default answer to all options'
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
new file mode 100644
index 00000000000..95984db8e1e
--- /dev/null
+++ b/scripts/kconfig/streamline_config.pl
@@ -0,0 +1,366 @@
+#!/usr/bin/perl -w
+#
+# Copywrite 2005-2009 - Steven Rostedt
+# Licensed under the terms of the GNU GPL License version 2
+#
+#  It's simple enough to figure out how this works.
+#  If not, then you can ask me at stripconfig@goodmis.org
+#
+# What it does?
+#
+#   If you have installed a Linux kernel from a distribution
+#   that turns on way too many modules than you need, and
+#   you only want the modules you use, then this program
+#   is perfect for you.
+#
+#   It gives you the ability to turn off all the modules that are
+#   not loaded on your system.
+#
+# Howto:
+#
+#  1. Boot up the kernel that you want to stream line the config on.
+#  2. Change directory to the directory holding the source of the
+#       kernel that you just booted.
+#  3. Copy the configuraton file to this directory as .config
+#  4. Have all your devices that you need modules for connected and
+#      operational (make sure that their corresponding modules are loaded)
+#  5. Run this script redirecting the output to some other file
+#       like config_strip.
+#  6. Back up your old config (if you want too).
+#  7. copy the config_strip file to .config
+#  8. Run "make oldconfig"
+#
+#  Now your kernel is ready to be built with only the modules that
+#  are loaded.
+#
+# Here's what I did with my Debian distribution.
+#
+#    cd /usr/src/linux-2.6.10
+#    cp /boot/config-2.6.10-1-686-smp .config
+#    ~/bin/streamline_config > config_strip
+#    mv .config config_sav
+#    mv config_strip .config
+#    make oldconfig
+#
+my $config = ".config";
+my $linuxpath = ".";
+
+my $uname = `uname -r`;
+chomp $uname;
+
+my @searchconfigs = (
+	{
+	    "file" => ".config",
+	    "exec" => "cat",
+	},
+	{
+	    "file" => "/proc/config.gz",
+	    "exec" => "zcat",
+	},
+	{
+	    "file" => "/boot/config-$uname",
+	    "exec" => "cat",
+	},
+	{
+	    "file" => "/boot/vmlinuz-$uname",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "vmlinux",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "/lib/modules/$uname/kernel/kernel/configs.ko",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "kernel/configs.ko",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "kernel/configs.o",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+);
+
+sub find_config {
+    foreach my $conf (@searchconfigs) {
+	my $file = $conf->{"file"};
+
+	next if ( ! -f "$file");
+
+	if (defined($conf->{"test"})) {
+	    `$conf->{"test"} $conf->{"file"} 2>/dev/null`;
+	    next if ($?);
+	}
+
+	my $exec = $conf->{"exec"};
+
+	print STDERR "using config: '$file'\n";
+
+	open(CIN, "$exec $file |") || die "Failed to run $exec $file";
+	return;
+    }
+    die "No config file found";
+}
+
+find_config;
+
+my @makefiles = `find $linuxpath -name Makefile`;
+my %depends;
+my %selects;
+my %prompts;
+my %objects;
+my $var;
+my $cont = 0;
+
+# Get the top level Kconfig file (passed in)
+my $kconfig = $ARGV[0];
+
+# prevent recursion
+my %read_kconfigs;
+
+sub read_kconfig {
+    my ($kconfig) = @_;
+
+    my $state = "NONE";
+    my $config;
+    my @kconfigs;
+
+    open(KIN, $kconfig) || die "Can't open $kconfig";
+    while (<KIN>) {
+	chomp;
+
+	# collect any Kconfig sources
+	if (/^source\s*"(.*)"/) {
+	    $kconfigs[$#kconfigs+1] = $1;
+	}
+
+	# configs found
+	if (/^\s*config\s+(\S+)\s*$/) {
+	    $state = "NEW";
+	    $config = $1;
+
+	# collect the depends for the config
+	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+	    $state = "DEP";
+	    $depends{$config} = $1;
+	} elsif ($state eq "DEP" && /^\s*depends\s+on\s+(.*)$/) {
+	    $depends{$config} .= " " . $1;
+
+	# Get the configs that select this config
+	} elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
+	    if (defined($selects{$1})) {
+		$selects{$1} .= " " . $config;
+	    } else {
+		$selects{$1} = $config;
+	    }
+
+	# configs without prompts must be selected
+	} elsif ($state ne "NONE" && /^\s*tristate\s\S/) {
+	    # note if the config has a prompt
+	    $prompt{$config} = 1;
+
+	# stop on "help"
+	} elsif (/^\s*help\s*$/) {
+	    $state = "NONE";
+	}
+    }
+    close(KIN);
+
+    # read in any configs that were found.
+    foreach $kconfig (@kconfigs) {
+	if (!defined($read_kconfigs{$kconfig})) {
+	    $read_kconfigs{$kconfig} = 1;
+	    read_kconfig($kconfig);
+	}
+    }
+}
+
+if ($kconfig) {
+    read_kconfig($kconfig);
+}
+
+# Read all Makefiles to map the configs to the objects
+foreach my $makefile (@makefiles) {
+    chomp $makefile;
+
+    open(MIN,$makefile) || die "Can't open $makefile";
+    while (<MIN>) {
+	my $objs;
+
+	# is this a line after a line with a backslash?
+	if ($cont && /(\S.*)$/) {
+	    $objs = $1;
+	}
+	$cont = 0;
+
+	# collect objects after obj-$(CONFIG_FOO_BAR)
+	if (/obj-\$\((CONFIG_[^\)]*)\)\s*[+:]?=\s*(.*)/) {
+	    $var = $1;
+	    $objs = $2;
+	}
+	if (defined($objs)) {
+	    # test if the line ends with a backslash
+	    if ($objs =~ m,(.*)\\$,) {
+		$objs = $1;
+		$cont = 1;
+	    }
+
+	    foreach my $obj (split /\s+/,$objs) {
+		$obj =~ s/-/_/g;
+		if ($obj =~ /(.*)\.o$/) {
+		    # Objects may bes enabled by more than one config.
+		    # Store configs in an array.
+		    my @arr;
+
+		    if (defined($objects{$1})) {
+			@arr = @{$objects{$1}};
+		    }
+
+		    $arr[$#arr+1] = $var;
+
+		    # The objects have a hash mapping to a reference
+		    # of an array of configs.
+		    $objects{$1} = \@arr;
+		}
+	    }
+	}
+    }
+    close(MIN);
+}
+
+my %modules;
+
+# see what modules are loaded on this system
+open(LIN,"/sbin/lsmod|") || die "Cant lsmod";
+while (<LIN>) {
+	next if (/^Module/);  # Skip the first line.
+	if (/^(\S+)/) {
+		$modules{$1} = 1;
+	}
+}
+close (LIN);
+
+# add to the configs hash all configs that are needed to enable
+# a loaded module.
+my %configs;
+foreach my $module (keys(%modules)) {
+    if (defined($objects{$module})) {
+	@arr = @{$objects{$module}};
+	foreach my $conf (@arr) {
+	    $configs{$conf} = $module;
+	}
+    } else {
+	# Most likely, someone has a custom (binary?) module loaded.
+	print STDERR "$module config not found!!\n";
+    }
+}
+
+my $valid = "A-Za-z_0-9";
+my $repeat = 1;
+
+#
+# Note, we do not care about operands (like: &&, ||, !) we want to add any
+# config that is in the depend list of another config. This script does
+# not enable configs that are not already enabled. If we come across a
+# config A that depends on !B, we can still add B to the list of depends
+# to keep on. If A was on in the original config, B would not have been
+# and B would not be turned on by this script.
+#
+sub parse_config_dep_select
+{
+    my ($p) = @_;
+
+    while ($p =~ /[$valid]/) {
+
+	if ($p =~ /^[^$valid]*([$valid]+)/) {
+	    my $conf = "CONFIG_" . $1;
+
+	    $p =~ s/^[^$valid]*[$valid]+//;
+
+	    if (!defined($configs{$conf})) {
+		# We must make sure that this config has its
+		# dependencies met.
+		$repeat = 1; # do again
+		$configs{$conf} = 1;
+	    }
+	} else {
+	    die "this should never happen";
+	}
+    }
+}
+
+while ($repeat) {
+    $repeat = 0;
+
+    foreach my $config (keys %configs) {
+	$config =~ s/^CONFIG_//;
+
+	if (defined($depends{$config})) {
+	    # This config has dependencies. Make sure they are also included
+	    parse_config_dep_select $depends{$config};
+	}
+
+	if (defined($prompt{$config}) || !defined($selects{$config})) {
+	    next;
+	}
+
+	# config has no prompt and must be selected.
+	parse_config_dep_select $selects{$config};
+    }
+}
+
+my %setconfigs;
+
+# Finally, read the .config file and turn off any module enabled that
+# we could not find a reason to keep enabled.
+while(<CIN>) {
+
+    if (/CONFIG_IKCONFIG/) {
+	if (/# CONFIG_IKCONFIG is not set/) {
+	    # enable IKCONFIG at least as a module
+	    print "CONFIG_IKCONFIG=m\n";
+	    # don't ask about PROC
+	    print "# CONFIG_IKCONFIG_PROC is not set\n";
+	} else {
+	    print;
+	}
+	next;
+    }
+
+    if (/^(CONFIG.*)=(m|y)/) {
+	if (defined($configs{$1})) {
+	    $setconfigs{$1} = $2;
+	} elsif ($2 eq "m") {
+	    print "# $1 is not set\n";
+	    next;
+	}
+    }
+    print;
+}
+close(CIN);
+
+# Integrity check, make sure all modules that we want enabled do
+# indeed have their configs set.
+loop:
+foreach my $module (keys(%modules)) {
+    if (defined($objects{$module})) {
+	my @arr = @{$objects{$module}};
+	foreach my $conf (@arr) {
+	    if (defined($setconfigs{$conf})) {
+		next loop;
+	    }
+	}
+	print STDERR "module $module did not have configs";
+	foreach my $conf (@arr) {
+	    print STDERR " " , $conf;
+	}
+	print STDERR "\n";
+    }
+}
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index b52d340d759..ea9f8a58678 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1995,6 +1995,7 @@ sub process_file($) {
     my $identifier;
     my $func;
     my $descr;
+    my $in_purpose = 0;
     my $initial_section_counter = $section_counter;
 
     if (defined($ENV{'SRCTREE'})) {
@@ -2044,6 +2045,7 @@ sub process_file($) {
 		    $descr =~ s/\s*$//;
 		    $descr =~ s/\s+/ /;
 		    $declaration_purpose = xml_escape($descr);
+		    $in_purpose = 1;
 		} else {
 		    $declaration_purpose = "";
 		}
@@ -2090,6 +2092,7 @@ sub process_file($) {
 		}
 
 		$in_doc_sect = 1;
+		$in_purpose = 0;
 		$contents = $newcontents;
 		if ($contents ne "") {
 		    while ((substr($contents, 0, 1) eq " ") ||
@@ -2119,11 +2122,19 @@ sub process_file($) {
 	    } elsif (/$doc_content/) {
 		# miguel-style comment kludge, look for blank lines after
 		# @parameter line to signify start of description
-		if ($1 eq "" &&
-			($section =~ m/^@/ || $section eq $section_context)) {
-		    dump_section($file, $section, xml_escape($contents));
-		    $section = $section_default;
-		    $contents = "";
+		if ($1 eq "") {
+		    if ($section =~ m/^@/ || $section eq $section_context) {
+			dump_section($file, $section, xml_escape($contents));
+			$section = $section_default;
+			$contents = "";
+		    } else {
+			$contents .= "\n";
+		    }
+		    $in_purpose = 0;
+		} elsif ($in_purpose == 1) {
+		    # Continued declaration purpose
+		    chomp($declaration_purpose);
+		    $declaration_purpose .= " " . xml_escape($1);
 		} else {
 		    $contents .= $1 . "\n";
 		}
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 528492bcba5..89774011965 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,6 +1,7 @@
 #!/usr/bin/perl
 
 use File::Basename;
+use Math::BigInt;
 
 # Copyright 2008, Intel Corporation
 #
@@ -172,8 +173,8 @@ while (<STDIN>) {
 	parse_x86_regs($line);
 }
 
-my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = hex($target) + 8192;
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
 if ($target eq "0") {
 	print "No oops found!\n";
 	print "Usage: \n";
diff --git a/scripts/module-common.lds b/scripts/module-common.lds
new file mode 100644
index 00000000000..47a1f9ae0ed
--- /dev/null
+++ b/scripts/module-common.lds
@@ -0,0 +1,8 @@
+/*
+ * Common module linker script, always used when linking a module.
+ * Archs are free to supply their own linker scripts.  ld will
+ * combine them automatically.
+ */
+SECTIONS {
+	/DISCARD/ : { *(.discard) }
+}
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 7109e2b5bc0..090d300d739 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -57,7 +57,6 @@
 #        call mcount  (offset: 0x5)
 #        [...]
 #        ret
-#  .globl my_func
 #  other_func:
 #        [...]
 #        call mcount (offset: 0x1b)
@@ -393,7 +392,7 @@ while (<IN>) {
 	    $read_function = 0;
 	}
 	# print out any recorded offsets
-	update_funcs() if ($text_found);
+	update_funcs() if (defined($ref_func));
 
 	# reset all markers and arrays
 	$text_found = 0;
@@ -403,7 +402,6 @@ while (<IN>) {
     # section found, now is this a start of a function?
     } elsif ($read_function && /$function_regex/) {
 	$text_found = 1;
-	$offset = hex $1;
 	$text = $2;
 
 	# if this is either a local function or a weak function
@@ -412,10 +410,15 @@ while (<IN>) {
 	if (!defined($locals{$text}) && !defined($weak{$text})) {
 	    $ref_func = $text;
 	    $read_function = 0;
+	    $offset = hex $1;
 	} else {
 	    # if we already have a function, and this is weak, skip it
-	    if (!defined($ref_func) || !defined($weak{$text})) {
+	    if (!defined($ref_func) && !defined($weak{$text}) &&
+		 # PPC64 can have symbols that start with .L and
+		 # gcc considers these special. Don't use them!
+		 $text !~ /^\.L/) {
 		$ref_func = $text;
+		$offset = hex $1;
 	    }
 	}
     } elsif ($read_headers && /$mcount_section/) {
@@ -440,7 +443,7 @@ while (<IN>) {
 }
 
 # dump out anymore offsets that may have been found
-update_funcs() if ($text_found);
+update_funcs() if (defined($ref_func));
 
 # If we did not find any mcount callers, we are done (do nothing).
 if (!$opened) {
diff --git a/scripts/tracing/power.pl b/scripts/tracing/power.pl
deleted file mode 100644
index 4f729b3501e..00000000000
--- a/scripts/tracing/power.pl
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/usr/bin/perl
-
-# Copyright 2008, Intel Corporation
-#
-# This file is part of the Linux kernel
-#
-# This program file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program in a file named COPYING; if not, write to the
-# Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301 USA
-#
-# Authors:
-# 	Arjan van de Ven <arjan@linux.intel.com>
-
-
-#
-# This script turns a cstate ftrace output into a SVG graphic that shows
-# historic C-state information
-#
-#
-# 	cat /sys/kernel/debug/tracing/trace | perl power.pl > out.svg
-#
-
-my @styles;
-my $base = 0;
-
-my @pstate_last;
-my @pstate_level;
-
-$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[8] = "fill:rgb(0,25,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-
-
-print "<?xml version=\"1.0\" standalone=\"no\"?> \n";
-print "<svg width=\"10000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n";
-
-my $scale = 30000.0;
-while (<>) {
-	my $line = $_;
-	if ($line =~ /([0-9\.]+)\] CSTATE: Going to C([0-9]) on cpu ([0-9]+) for ([0-9\.]+)/) {
-		if ($base == 0) {
-			$base = $1;
-		}
-		my $time = $1 - $base;
-		$time = $time * $scale;
-		my $C = $2;
-		my $cpu = $3;
-		my $y = 400 * $cpu;
-		my $duration = $4 * $scale;
-		my $msec = int($4 * 100000)/100.0;
-		my $height = $C * 20;
-		$style = $styles[$C];
-
-		$y = $y + 140 - $height;
-
-		$x2 = $time + 4;
-		$y2 = $y + 4;
-
-
-		print "<rect x=\"$time\" width=\"$duration\" y=\"$y\" height=\"$height\" style=\"$style\"/>\n";
-		print "<text transform=\"translate($x2,$y2) rotate(90)\">C$C $msec</text>\n";
-	}
-	if ($line =~ /([0-9\.]+)\] PSTATE: Going to P([0-9]) on cpu ([0-9]+)/) {
-		my $time = $1 - $base;
-		my $state = $2;
-		my $cpu = $3;
-
-		if (defined($pstate_last[$cpu])) {
-			my $from = $pstate_last[$cpu];
-			my $oldstate = $pstate_state[$cpu];
-			my $duration = ($time-$from) * $scale;
-
-			$from = $from * $scale;
-			my $to = $from + $duration;
-			my $height = 140 - ($oldstate * (140/8));
-
-			my $y = 400 * $cpu + 200 + $height;
-			my $y2 = $y+4;
-			my $style = $styles[8];
-
-			print "<rect x=\"$from\" y=\"$y\" width=\"$duration\" height=\"5\" style=\"$style\"/>\n";
-			print "<text transform=\"translate($from,$y2)\">P$oldstate (cpu $cpu)</text>\n";
-		};
-
-		$pstate_last[$cpu] = $time;
-		$pstate_state[$cpu] = $state;
-	}
-}
-
-
-print "</svg>\n";