aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/i386/IO-APIC.txt2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-smi.c39
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c42
-rw-r--r--arch/x86/kernel/io_delay.c8
-rw-r--r--arch/x86/kernel/mfgpt_32.c1
-rw-r--r--arch/x86/kernel/setup_32.c9
-rw-r--r--arch/x86/kernel/setup_64.c2
-rw-r--r--arch/x86/mm/discontig_32.c1
-rw-r--r--arch/x86/mm/ioremap.c6
-rw-r--r--arch/x86/mm/pageattr.c2
-rw-r--r--include/asm-x86/pgtable.h2
11 files changed, 70 insertions, 44 deletions
diff --git a/Documentation/i386/IO-APIC.txt b/Documentation/i386/IO-APIC.txt
index f95166645d2..30b4c714fbe 100644
--- a/Documentation/i386/IO-APIC.txt
+++ b/Documentation/i386/IO-APIC.txt
@@ -70,7 +70,7 @@ Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD:
These INTA-D PCI IRQs are always 'local to the card', their real meaning
depends on which slot they are in. If you look at the daisy chaining diagram,
-a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ2 of
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
the PCI chipset. Most cards issue INTA, this creates optimal distribution
between the PIRQ lines. (distributing IRQ sources properly is not a
necessity, PCI IRQs can be shared at will, but it's a good for performance
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index f2b5a621d27..8a85c93bd62 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -63,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
*/
static int speedstep_smi_ownership (void)
{
- u32 command, result, magic;
+ u32 command, result, magic, dummy;
u32 function = GET_SPEEDSTEP_OWNER;
unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
@@ -73,8 +73,11 @@ static int speedstep_smi_ownership (void)
dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
__asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=D" (result)
+ "pop %%ebp\n"
+ : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+ "=S" (dummy)
: "a" (command), "b" (function), "c" (0), "d" (smi_port),
"D" (0), "S" (magic)
: "memory"
@@ -96,7 +99,7 @@ static int speedstep_smi_ownership (void)
*/
static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
{
- u32 command, result = 0, edi, high_mhz, low_mhz;
+ u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
u32 state=0;
u32 function = GET_SPEEDSTEP_FREQS;
@@ -109,10 +112,12 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
- __asm__ __volatile__("movl $0, %%edi\n"
+ __asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ "pop %%ebp"
+ : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
);
dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
@@ -135,16 +140,18 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
static int speedstep_get_state (void)
{
u32 function=GET_SPEEDSTEP_STATE;
- u32 result, state, edi, command;
+ u32 result, state, edi, command, dummy;
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
- __asm__ __volatile__("movl $0, %%edi\n"
+ __asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=a" (result), "=b" (state), "=D" (edi)
- : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+ "pop %%ebp\n"
+ : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
);
dprintk("state is %x, result is %x\n", state, result);
@@ -160,7 +167,7 @@ static int speedstep_get_state (void)
*/
static void speedstep_set_state (unsigned int state)
{
- unsigned int result = 0, command, new_state;
+ unsigned int result = 0, command, new_state, dummy;
unsigned long flags;
unsigned int function=SET_SPEEDSTEP_STATE;
unsigned int retry = 0;
@@ -182,10 +189,12 @@ static void speedstep_set_state (unsigned int state)
}
retry++;
__asm__ __volatile__(
- "movl $0, %%edi\n"
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=b" (new_state), "=D" (result)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ "pop %%ebp"
+ : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
+ "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
);
} while ((new_state != state) && (retry <= SMI_TRIES));
@@ -195,7 +204,7 @@ static void speedstep_set_state (unsigned int state)
if (new_state == state) {
dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
} else {
- printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+ printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
}
return;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 103d61a59b1..3e18db4cefe 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -176,12 +176,13 @@ static inline void k8_enable_fixed_iorrs(void)
}
/**
- * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
- * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
- * \param msr MSR address of the MTTR which should be checked and updated
- * \param changed pointer which indicates whether the MTRR needed to be changed
- * \param msrwords pointer to the MSR values which the MSR should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * @msr: MSR address of the MTTR which should be checked and updated
+ * @changed: pointer which indicates whether the MTRR needed to be changed
+ * @msrwords: pointer to the MSR values which the MSR should have
+ *
+ * If K8 extentions are wanted, update the K8 SYSCFG MSR also.
+ * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information.
*/
static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
{
@@ -199,12 +200,15 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
}
}
+/**
+ * generic_get_free_region - Get a free MTRR.
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ * @replace_reg: mtrr index to be replaced; set to invalid value if none.
+ *
+ * Returns: The index of the region on success, else negative on error.
+ */
int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/* [SUMMARY] Get a free MTRR.
- <base> The starting (base) address of the region.
- <size> The size (in bytes) of the region.
- [RETURNS] The index of the region on success, else -1 on error.
-*/
{
int i, max;
mtrr_type ltype;
@@ -249,8 +253,8 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
}
/**
- * Checks and updates the fixed-range MTRRs if they differ from the saved set
- * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
*/
static int set_fixed_ranges(mtrr_type * frs)
{
@@ -294,13 +298,13 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
static u32 deftype_lo, deftype_hi;
+/**
+ * set_mtrr_state - Set the MTRR state for this CPU.
+ *
+ * NOTE: The CPU must already be in a safe state for MTRR changes.
+ * RETURNS: 0 if no changes made, else a mask indicating what was changed.
+ */
static unsigned long set_mtrr_state(void)
-/* [SUMMARY] Set the MTRR state for this CPU.
- <state> The MTRR state information to read.
- <ctxt> Some relevant CPU context.
- [NOTE] The CPU must already be in a safe state for MTRR changes.
- [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
{
unsigned int i;
unsigned long change_mask = 0;
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index c706a306155..5921e5f0a64 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -78,6 +78,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
},
{
.callback = dmi_io_delay_0xed_port,
+ .ident = "HP Pavilion dv6000",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30B8")
+ }
+ },
+ {
+ .callback = dmi_io_delay_0xed_port,
.ident = "HP Pavilion tx1000",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 027fc067b39..b402c0f3f19 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/geode.h>
static struct mfgpt_timer_t {
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index a1d7071a51c..2b3e5d45176 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -406,8 +406,6 @@ static unsigned long __init setup_memory(void)
*/
min_low_pfn = PFN_UP(init_pg_tables_end);
- find_max_pfn();
-
max_low_pfn = find_max_low_pfn();
#ifdef CONFIG_HIGHMEM
@@ -764,12 +762,13 @@ void __init setup_arch(char **cmdline_p)
if (efi_enabled)
efi_init();
- max_low_pfn = setup_memory();
-
/* update e820 for memory not covered by WB MTRRs */
+ find_max_pfn();
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
- max_low_pfn = setup_memory();
+ find_max_pfn();
+
+ max_low_pfn = setup_memory();
#ifdef CONFIG_VMI
/*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 7637dc91c79..f4f7ecfb898 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -801,7 +801,7 @@ static void __cpuinit srat_detect_node(void)
/* Don't do the funky fallback heuristics the AMD version employs
for now. */
node = apicid_to_node[apicid];
- if (node == NUMA_NO_NODE)
+ if (node == NUMA_NO_NODE || !node_online(node))
node = first_node(node_online_map);
numa_set_node(cpu, node);
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index c394ca0720b..8e25e06ff73 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -324,7 +324,6 @@ unsigned long __init setup_memory(void)
* this space and use it to adjust the boundary between ZONE_NORMAL
* and ZONE_HIGHMEM.
*/
- find_max_pfn();
get_memcfg_numa();
kva_pages = calculate_numa_remap_pages();
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 4afaba0ed72..794895c6dcc 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -137,7 +137,11 @@ static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size,
switch (mode) {
case IOR_MODE_UNCACHED:
default:
- prot = PAGE_KERNEL_NOCACHE;
+ /*
+ * FIXME: we will use UC MINUS for now, as video fb drivers
+ * depend on it. Upcoming ioremap_wc() will fix this behavior.
+ */
+ prot = PAGE_KERNEL_UC_MINUS;
break;
case IOR_MODE_CACHED:
prot = PAGE_KERNEL;
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 14e48b5a94b..7b79f6be4e7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -771,7 +771,7 @@ static inline int change_page_attr_clear(unsigned long addr, int numpages,
int set_memory_uc(unsigned long addr, int numpages)
{
return change_page_attr_set(addr, numpages,
- __pgprot(_PAGE_PCD | _PAGE_PWT));
+ __pgprot(_PAGE_PCD));
}
EXPORT_SYMBOL(set_memory_uc);
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 174b8773871..9cf472aeb9c 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -85,6 +85,7 @@ extern pteval_t __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
#define __PAGE_KERNEL_EXEC_NOCACHE (__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS (__PAGE_KERNEL | _PAGE_PCD)
#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
#define __PAGE_KERNEL_VSYSCALL_NOCACHE (__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
@@ -101,6 +102,7 @@ extern pteval_t __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
#define PAGE_KERNEL_EXEC MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
#define PAGE_KERNEL_RX MAKE_GLOBAL(__PAGE_KERNEL_RX)
#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS MAKE_GLOBAL(__PAGE_KERNEL_UC_MINUS)
#define PAGE_KERNEL_EXEC_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_EXEC_NOCACHE)
#define PAGE_KERNEL_LARGE MAKE_GLOBAL(__PAGE_KERNEL_LARGE)
#define PAGE_KERNEL_LARGE_EXEC MAKE_GLOBAL(__PAGE_KERNEL_LARGE_EXEC)