aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/powerpc/booting-without-of.txt252
-rw-r--r--arch/powerpc/Kconfig21
-rw-r--r--arch/powerpc/boot/dts/mpc8272ads.dts223
-rw-r--r--arch/powerpc/boot/dts/mpc8360emds.dts375
-rw-r--r--arch/powerpc/boot/zImage.coff.lds.S1
-rw-r--r--arch/powerpc/configs/mpc8360emds_defconfig1018
-rw-r--r--arch/powerpc/kernel/cputable.c15
-rw-r--r--arch/powerpc/kernel/entry_64.S18
-rw-r--r--arch/powerpc/kernel/head_64.S28
-rw-r--r--arch/powerpc/kernel/misc_64.S46
-rw-r--r--arch/powerpc/kernel/pci_64.c58
-rw-r--r--arch/powerpc/kernel/setup-common.c25
-rw-r--r--arch/powerpc/kernel/setup_32.c8
-rw-r--r--arch/powerpc/kernel/setup_64.c12
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S8
-rw-r--r--arch/powerpc/mm/pgtable_64.c29
-rw-r--r--arch/powerpc/mm/slb_low.S3
-rw-r--r--arch/powerpc/platforms/82xx/Kconfig21
-rw-r--r--arch/powerpc/platforms/82xx/Makefile5
-rw-r--r--arch/powerpc/platforms/82xx/m82xx_pci.h19
-rw-r--r--arch/powerpc/platforms/82xx/mpc82xx.c111
-rw-r--r--arch/powerpc/platforms/82xx/mpc82xx_ads.c661
-rw-r--r--arch/powerpc/platforms/82xx/pq2ads.h67
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig13
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_mds.c215
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_mds.h19
-rw-r--r--arch/powerpc/platforms/83xx/mpc8360e_pb.c219
-rw-r--r--arch/powerpc/platforms/cell/interrupt.c235
-rw-r--r--arch/powerpc/platforms/cell/interrupt.h97
-rw-r--r--arch/powerpc/platforms/cell/spider-pic.c9
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c19
-rw-r--r--arch/powerpc/platforms/iseries/pci.c8
-rw-r--r--arch/powerpc/platforms/iseries/setup.c16
-rw-r--r--arch/powerpc/platforms/powermac/udbg_scc.c14
-rw-r--r--arch/powerpc/platforms/pseries/setup.c2
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--arch/powerpc/sysdev/cpm2_pic.c2
-rw-r--r--arch/powerpc/sysdev/cpm2_pic.h2
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c62
-rw-r--r--arch/powerpc/sysdev/qe_lib/Kconfig30
-rw-r--r--arch/powerpc/sysdev/qe_lib/Makefile8
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c353
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.c555
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.h106
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_io.c226
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc.c251
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_fast.c396
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c404
-rw-r--r--arch/powerpc/xmon/xmon.c35
-rw-r--r--drivers/block/swim3.c4
-rw-r--r--drivers/char/hvc_iseries.c8
-rw-r--r--drivers/char/hvc_vio.c4
-rw-r--r--include/asm-powerpc/firmware.h67
-rw-r--r--include/asm-powerpc/immap_qe.h477
-rw-r--r--include/asm-powerpc/qe.h457
-rw-r--r--include/asm-powerpc/qe_ic.h64
-rw-r--r--include/asm-powerpc/system.h4
-rw-r--r--include/asm-powerpc/ucc.h84
-rw-r--r--include/asm-powerpc/ucc_fast.h243
-rw-r--r--include/asm-powerpc/ucc_slow.h289
-rw-r--r--include/asm-powerpc/xmon.h26
-rw-r--r--include/linux/fsl_devices.h65
62 files changed, 7809 insertions, 304 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1ccc8a515b4..27b457c0972 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1440,6 +1440,258 @@ platforms are moved over to use the flattened-device-tree model.
descriptor-types-mask = <012b0ebf>;
};
+ h) Board Control and Status (BCSR)
+
+ Required properties:
+
+ - device_type : Should be "board-control"
+ - reg : Offset and length of the register set for the device
+
+ Example:
+
+ bcsr@f8000000 {
+ device_type = "board-control";
+ reg = <f8000000 8000>;
+ };
+
+ i) Freescale QUICC Engine module (QE)
+ This represents qe module that is installed on PowerQUICC II Pro.
+ Hopefully it will merge backward compatibility with CPM/CPM2.
+ Basically, it is a bus of devices, that could act more or less
+ as a complete entity (UCC, USB etc ). All of them should be siblings on
+ the "root" qe node, using the common properties from there.
+ The description below applies to the the qe of MPC8360 and
+ more nodes and properties would be extended in the future.
+
+ i) Root QE device
+
+ Required properties:
+ - device_type : should be "qe";
+ - model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
+ - reg : offset and length of the device registers.
+ - bus-frequency : the clock frequency for QUICC Engine.
+
+ Recommended properties
+ - brg-frequency : the internal clock source frequency for baud-rate
+ generators in Hz.
+
+ Example:
+ qe@e0100000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 e0100000 00100000>;
+ reg = <e0100000 480>;
+ brg-frequency = <0>;
+ bus-frequency = <179A7B00>;
+ }
+
+
+ ii) SPI (Serial Peripheral Interface)
+
+ Required properties:
+ - device_type : should be "spi".
+ - compatible : should be "fsl_spi".
+ - mode : the spi operation mode, it can be "cpu" or "qe".
+ - reg : Offset and length of the register set for the device
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ Example:
+ spi@4c0 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <4c0 40>;
+ interrupts = <82 0>;
+ interrupt-parent = <700>;
+ mode = "cpu";
+ };
+
+
+ iii) USB (Universal Serial Bus Controller)
+
+ Required properties:
+ - device_type : should be "usb".
+ - compatible : could be "qe_udc" or "fhci-hcd".
+ - mode : the could be "host" or "slave".
+ - reg : Offset and length of the register set for the device
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ Example(slave):
+ usb@6c0 {
+ device_type = "usb";
+ compatible = "qe_udc";
+ reg = <6c0 40>;
+ interrupts = <8b 0>;
+ interrupt-parent = <700>;
+ mode = "slave";
+ };
+
+
+ iv) UCC (Unified Communications Controllers)
+
+ Required properties:
+ - device_type : should be "network", "hldc", "uart", "transparent"
+ "bisync" or "atm".
+ - compatible : could be "ucc_geth" or "fsl_atm" and so on.
+ - model : should be "UCC".
+ - device-id : the ucc number(1-8), corresponding to UCCx in UM.
+ - reg : Offset and length of the register set for the device
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - pio-handle : The phandle for the Parallel I/O port configuration.
+ - rx-clock : represents the UCC receive clock source.
+ 0x00 : clock source is disabled;
+ 0x1~0x10 : clock source is BRG1~BRG16 respectively;
+ 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
+ - tx-clock: represents the UCC transmit clock source;
+ 0x00 : clock source is disabled;
+ 0x1~0x10 : clock source is BRG1~BRG16 respectively;
+ 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
+
+ Required properties for network device_type:
+ - mac-address : list of bytes representing the ethernet address.
+ - phy-handle : The phandle for the PHY connected to this controller.
+
+ Example:
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <1>;
+ reg = <2000 200>;
+ interrupts = <a0 0>;
+ interrupt-parent = <700>;
+ mac-address = [ 00 04 9f 00 23 23 ];
+ rx-clock = "none";
+ tx-clock = "clk9";
+ phy-handle = <212000>;
+ pio-handle = <140001>;
+ };
+
+
+ v) Parallel I/O Ports
+
+ This node configures Parallel I/O ports for CPUs with QE support.
+ The node should reside in the "soc" node of the tree. For each
+ device that using parallel I/O ports, a child node should be created.
+ See the definition of the Pin configuration nodes below for more
+ information.
+
+ Required properties:
+ - device_type : should be "par_io".
+ - reg : offset to the register set and its length.
+ - num-ports : number of Parallel I/O ports
+
+ Example:
+ par_io@1400 {
+ reg = <1400 100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "par_io";
+ num-ports = <7>;
+ ucc_pin@01 {
+ ......
+ };
+
+
+ vi) Pin configuration nodes
+
+ Required properties:
+ - linux,phandle : phandle of this node; likely referenced by a QE
+ device.
+ - pio-map : array of pin configurations. Each pin is defined by 6
+ integers. The six numbers are respectively: port, pin, dir,
+ open_drain, assignment, has_irq.
+ - port : port number of the pin; 0-6 represent port A-G in UM.
+ - pin : pin number in the port.
+ - dir : direction of the pin, should encode as follows:
+
+ 0 = The pin is disabled
+ 1 = The pin is an output
+ 2 = The pin is an input
+ 3 = The pin is I/O
+
+ - open_drain : indicates the pin is normal or wired-OR:
+
+ 0 = The pin is actively driven as an output
+ 1 = The pin is an open-drain driver. As an output, the pin is
+ driven active-low, otherwise it is three-stated.
+
+ - assignment : function number of the pin according to the Pin Assignment
+ tables in User Manual. Each pin can have up to 4 possible functions in
+ QE and two options for CPM.
+ - has_irq : indicates if the pin is used as source of exteral
+ interrupts.
+
+ Example:
+ ucc_pin@01 {
+ linux,phandle = <140001>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0 3 1 0 1 0 /* TxD0 */
+ 0 4 1 0 1 0 /* TxD1 */
+ 0 5 1 0 1 0 /* TxD2 */
+ 0 6 1 0 1 0 /* TxD3 */
+ 1 6 1 0 3 0 /* TxD4 */
+ 1 7 1 0 1 0 /* TxD5 */
+ 1 9 1 0 2 0 /* TxD6 */
+ 1 a 1 0 2 0 /* TxD7 */
+ 0 9 2 0 1 0 /* RxD0 */
+ 0 a 2 0 1 0 /* RxD1 */
+ 0 b 2 0 1 0 /* RxD2 */
+ 0 c 2 0 1 0 /* RxD3 */
+ 0 d 2 0 1 0 /* RxD4 */
+ 1 1 2 0 2 0 /* RxD5 */
+ 1 0 2 0 2 0 /* RxD6 */
+ 1 4 2 0 2 0 /* RxD7 */
+ 0 7 1 0 1 0 /* TX_EN */
+ 0 8 1 0 1 0 /* TX_ER */
+ 0 f 2 0 1 0 /* RX_DV */
+ 0 10 2 0 1 0 /* RX_ER */
+ 0 0 2 0 1 0 /* RX_CLK */
+ 2 9 1 0 3 0 /* GTX_CLK - CLK10 */
+ 2 8 2 0 1 0>; /* GTX125 - CLK9 */
+ };
+
+ vii) Multi-User RAM (MURAM)
+
+ Required properties:
+ - device_type : should be "muram".
+ - mode : the could be "host" or "slave".
+ - ranges : Should be defined as specified in 1) to describe the
+ translation of MURAM addresses.
+ - data-only : sub-node which defines the address area under MURAM
+ bus that can be allocated as data/parameter
+
+ Example:
+
+ muram@10000 {
+ device_type = "muram";
+ ranges = <0 00010000 0000c000>;
+
+ data-only@0{
+ reg = <0 c000>;
+ };
+ };
More devices will be defined as this spec matures.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 96ef656e466..8b691046557 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -338,10 +338,6 @@ config PPC_MULTIPLATFORM
RS/6000 machine, an Apple machine, or a PReP, CHRP,
Maple or Cell-based machine.
-config PPC_ISERIES
- bool "IBM Legacy iSeries"
- depends on PPC64
-
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based board"
depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
@@ -355,6 +351,16 @@ config APUS
<http://linux-apus.sourceforge.net/>.
endchoice
+config QUICC_ENGINE
+ bool
+ depends on PPC_MPC836x || PPC_MPC832x
+ default y
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool "IBM pSeries & new (POWER5-based) iSeries"
@@ -365,6 +371,10 @@ config PPC_PSERIES
select PPC_UDBG_16550
default y
+config PPC_ISERIES
+ bool "IBM Legacy iSeries"
+ depends on PPC_MULTIPLATFORM && PPC64
+
config PPC_CHRP
bool "Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
@@ -594,6 +604,7 @@ endmenu
source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
+source arch/powerpc/platforms/82xx/Kconfig
source arch/powerpc/platforms/83xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/86xx/Kconfig
@@ -1058,6 +1069,8 @@ source "fs/Kconfig"
# XXX source "arch/ppc/8260_io/Kconfig"
+source "arch/powerpc/sysdev/qe_lib/Kconfig"
+
source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
new file mode 100644
index 00000000000..34efdd028c4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -0,0 +1,223 @@
+/*
+ * MPC8272 ADS Device Tree Source
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "MPC8272ADS";
+ compatible = "MPC8260ADS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8272@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ linux,phandle = <201>;
+ linux,boot-cpu;
+ };
+ };
+
+ interrupt-controller@f8200000 {
+ linux,phandle = <f8200000>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <f8200000 f8200004>;
+ built-in;
+ device_type = "pci-pic";
+ };
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 4000000 f4500000 00000020>;
+ };
+
+ soc8272@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = < 0 0 2 00000000 f0000000 00053000>;
+ reg = <f0000000 0>;
+
+ mdio@0 {
+ device_type = "mdio";
+ compatible = "fs_enet";
+ reg = <0 0>;
+ linux,phandle = <24520>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <10c00>;
+ interrupts = <19 1>;
+ reg = <0>;
+ bitbang = [ 12 12 13 02 02 01 ];
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <10c00>;
+ interrupts = <19 1>;
+ bitbang = [ 12 12 13 02 02 01 ];
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ device-id = <2>;
+ compatible = "fs_enet";
+ model = "FCC";
+ reg = <11300 20 8400 100 11380 30>;
+ mac-address = [ 00 11 2F 99 43 54 ];
+ interrupts = <20 2>;
+ interrupt-parent = <10c00>;
+ phy-handle = <2452000>;
+ rx-clock = <13>;
+ tx-clock = <12>;
+ };
+
+ ethernet@25000 {
+ device_type = "network";
+ device-id = <3>;
+ compatible = "fs_enet";
+ model = "FCC";
+ reg = <11320 20 8500 100 113b0 30>;
+ mac-address = [ 00 11 2F 99 44 54 ];
+ interrupts = <21 2>;
+ interrupt-parent = <10c00>;
+ phy-handle = <2452001>;
+ rx-clock = <17>;
+ tx-clock = <18>;
+ };
+
+ cpm@f0000000 {
+ linux,phandle = <f0000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "cpm";
+ model = "CPM2";
+ ranges = <00000000 00000000 3ffff>;
+ reg = <10d80 3280>;
+ command-proc = <119c0>;
+ brg-frequency = <17D7840>;
+ cpm_clk = <BEBC200>;
+
+ scc@11a00 {
+ device_type = "serial";
+ compatible = "cpm_uart";
+ model = "SCC";
+ device-id = <2>;
+ reg = <11a00 20 8000 100>;
+ current-speed = <1c200>;
+ interrupts = <28 2>;
+ interrupt-parent = <10c00>;
+ clock-setup = <0 00ffffff>;
+ rx-clock = <1>;
+ tx-clock = <1>;
+ };
+
+ scc@11a60 {
+ device_type = "serial";
+ compatible = "cpm_uart";
+ model = "SCC";
+ device-id = <5>;
+ reg = <11a60 20 8300 100>;
+ current-speed = <1c200>;
+ interrupts = <2b 2>;
+ interrupt-parent = <10c00>;
+ clock-setup = <1b ffffff00>;
+ rx-clock = <4>;
+ tx-clock = <4>;
+ };
+
+ };
+ interrupt-controller@10c00 {
+ linux,phandle = <10c00>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <10c00 80>;
+ built-in;
+ device_type = "cpm-pic";
+ compatible = "CPM2";
+ };
+ pci@0500 {
+ linux,phandle = <0500>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "8272";
+ device_type = "pci";
+ reg = <10430 4dc>;
+ clock-frequency = <3f940aa>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 f8200000 40 0
+ b000 0 0 2 f8200000 41 0
+ b000 0 0 3 f8200000 42 0
+ b000 0 0 4 f8200000 43 0
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 f8200000 43 0
+ b800 0 0 2 f8200000 40 0
+ b800 0 0 3 f8200000 41 0
+ b800 0 0 4 f8200000 42 0
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 f8200000 42 0
+ c000 0 0 2 f8200000 43 0
+ c000 0 0 3 f8200000 40 0
+ c000 0 0 4 f8200000 41 0>;
+ interrupt-parent = <10c00>;
+ interrupts = <14 3>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 40000000
+ 01000000 0 00000000 f6000000 0 02000000>;
+ };
+
+/* May need to remove if on a part without crypto engine */
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 0>;
+ interrupt-parent = <10c00>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
+/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
+ descriptor-types-mask = <01010ebf>;
+ };
+
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts
new file mode 100644
index 00000000000..9022192155b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8360emds.dts
@@ -0,0 +1,375 @@
+/*
+ * MPC8360E EMDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/ 00000000 1000000;
+*/
+
+/ {
+ model = "MPC8360EPB";
+ compatible = "MPC83xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8360@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <3EF1480>;
+ bus-frequency = <FBC5200>;
+ clock-frequency = <1F78A400>;
+ 32-bit;
+ linux,phandle = <201>;
+ linux,boot-cpu;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 10000000>;
+ };
+
+ bcsr@f8000000 {
+ device_type = "board-control";
+ reg = <f8000000 8000>;
+ };
+
+ soc8360@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <FBC5200>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <FBC5200>;
+ interrupts = <9 8>;
+ interrupt-parent = <700>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <FBC5200>;
+ interrupts = <a 8>;
+ interrupt-parent = <700>;
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = <700>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
+ /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
+ descriptor-types-mask = <01010ebf>;
+ };
+
+ pci@8500 {
+ linux,phandle = <8500>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 AD17 */
+ 8800 0 0 1 700 14 8
+ 8800 0 0 2 700 15 8
+ 8800 0 0 3 700 16 8
+ 8800 0 0 4 700 17 8
+
+ /* IDSEL 0x12 AD18 */
+ 9000 0 0 1 700 16 8
+ 9000 0 0 2 700 17 8
+ 9000 0 0 3 700 14 8
+ 9000 0 0 4 700 15 8
+
+ /* IDSEL 0x13 AD19 */
+ 9800 0 0 1 700 17 8
+ 9800 0 0 2 700 14 8
+ 9800 0 0 3 700 15 8
+ 9800 0 0 4 700 16 8
+
+ /* IDSEL 0x15 AD21*/
+ a800 0 0 1 700 14 8
+ a800 0 0 2 700 15 8
+ a800 0 0 3 700 16 8
+ a800 0 0 4 700 17 8
+
+ /* IDSEL 0x16 AD22*/
+ b000 0 0 1 700 17 8
+ b000 0 0 2 700 14 8
+ b000 0 0 3 700 15 8
+ b000 0 0 4 700 16 8
+
+ /* IDSEL 0x17 AD23*/
+ b800 0 0 1 700 16 8
+ b800 0 0 2 700 17 8
+ b800 0 0 3 700 14 8
+ b800 0 0 4 700 15 8
+
+ /* IDSEL 0x18 AD24*/
+ c000 0 0 1 700 15 8
+ c000 0 0 2 700 16 8
+ c000 0 0 3 700 17 8
+ c000 0 0 4 700 14 8>;
+ interrupt-parent = <700>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8500 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ pic@700 {
+ linux,phandle = <700>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+
+ par_io@1400 {
+ reg = <1400 100>;
+ device_type = "par_io";
+ num-ports = <7>;
+
+ ucc_pin@01 {
+ linux,phandle = <140001>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0 3 1 0 1 0 /* TxD0 */
+ 0 4 1 0 1 0 /* TxD1 */
+ 0 5 1 0 1 0 /* TxD2 */
+ 0 6 1 0 1 0 /* TxD3 */
+ 1 6 1 0 3 0 /* TxD4 */
+ 1 7 1 0 1 0 /* TxD5 */
+ 1 9 1 0 2 0 /* TxD6 */
+ 1 a 1 0 2 0 /* TxD7 */
+ 0 9 2 0 1 0 /* RxD0 */
+ 0 a 2 0 1 0 /* RxD1 */
+ 0 b 2 0 1 0 /* RxD2 */
+ 0 c 2 0 1 0 /* RxD3 */
+ 0 d 2 0 1 0 /* RxD4 */
+ 1 1 2 0 2 0 /* RxD5 */
+ 1 0 2 0 2 0 /* RxD6 */
+ 1 4 2 0 2 0 /* RxD7 */
+ 0 7 1 0 1 0 /* TX_EN */
+ 0 8 1 0 1 0 /* TX_ER */
+ 0 f 2 0 1 0 /* RX_DV */
+ 0 10 2 0 1 0 /* RX_ER */
+ 0 0 2 0 1 0 /* RX_CLK */
+ 2 9 1 0 3 0 /* GTX_CLK - CLK10 */
+ 2 8 2 0 1 0>; /* GTX125 - CLK9 */
+ };
+ ucc_pin@02 {
+ linux,phandle = <140002>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0 11 1 0 1 0 /* TxD0 */
+ 0 12 1 0 1 0 /* TxD1 */
+ 0 13 1 0 1 0 /* TxD2 */
+ 0 14 1 0 1 0 /* TxD3 */
+ 1 2 1 0 1 0 /* TxD4 */
+ 1 3 1 0 2 0 /* TxD5 */
+ 1 5 1 0 3 0 /* TxD6 */
+ 1 8 1 0 3 0 /* TxD7 */
+ 0 17 2 0 1 0 /* RxD0 */
+ 0 18 2 0 1 0 /* RxD1 */
+ 0 19 2 0 1 0 /* RxD2 */
+ 0 1a 2 0 1 0 /* RxD3 */
+ 0 1b 2 0 1 0 /* RxD4 */
+ 1 c 2 0 2 0 /* RxD5 */
+ 1 d 2 0 3 0 /* RxD6 */
+ 1 b 2 0 2 0 /* RxD7 */
+ 0 15 1 0 1 0 /* TX_EN */
+ 0 16 1 0 1 0 /* TX_ER */
+ 0 1d 2 0 1 0 /* RX_DV */
+ 0 1e 2 0 1 0 /* RX_ER */
+ 0 1f 2 0 1 0 /* RX_CLK */
+ 2 2 1 0 2 0 /* GTX_CLK - CLK10 */
+ 2 3 2 0 1 0 /* GTX125 - CLK4 */
+ 0 1 3 0 2 0 /* MDIO */
+ 0 2 1 0 1 0>; /* MDC */
+ };
+
+ };
+ };
+
+ qe@e0100000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 e0100000 00100000>;
+ reg = <e0100000 480>;
+ brg-frequency = <0>;
+ bus-frequency = <179A7B00>;
+
+ muram@10000 {
+ device_type = "muram";
+ ranges = <0 00010000 0000c000>;
+
+ data-only@0{
+ reg = <0 c000>;
+ };
+ };
+
+ spi@4c0 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <4c0 40>;
+ interrupts = <2>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ spi@500 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <500 40>;
+ interrupts = <1>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ usb@6c0 {
+ device_type = "usb";
+ compatible = "qe_udc";
+ reg = <6c0 40 8B00 100>;
+ interrupts = <b>;
+ interrupt-parent = <80>;
+ mode = "slave";
+ };
+
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <1>;
+ reg = <2000 200>;
+ interrupts = <20>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 04 9f 00 23 23 ];
+ rx-clock = <0>;
+ tx-clock = <19>;
+ phy-handle = <212000>;
+ pio-handle = <140001>;
+ };
+
+ ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <2>;
+ reg = <3000 200>;
+ interrupts = <21>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ rx-clock = <0>;
+ tx-clock = <14>;
+ phy-handle = <212001>;
+ pio-handle = <140002>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2120 18>;
+ device_type = "mdio";
+ compatible = "ucc_geth_phy";
+
+ ethernet-phy@00 {
+ linux,phandle = <212000>;
+ interrupt-parent = <700>;
+ interrupts = <11 2>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ interface = <6>; //ENET_1000_GMII
+ };
+ ethernet-phy@01 {
+ linux,phandle = <212001>;
+ interrupt-parent = <700>;
+ interrupts = <12 2>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ interface = <6>;
+ };
+ };
+
+ qeic@80 {
+ linux,phandle = <80>;
+ interrupt-controller;
+ device_type = "qeic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <80 80>;
+ built-in;
+ big-endian;
+ interrupts = <20 8 21 8>; //high:32 low:33
+ interrupt-parent = <700>;
+ };
+
+ };
+};
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index 6016251a1a2..05f32388b95 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -15,6 +15,7 @@ SECTIONS
{
*(.rodata*)
*(.data*)
+ *(__builtin_*)
*(.sdata*)
__got2_start = .;
*(.got2)
diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc8360emds_defconfig
new file mode 100644
index 00000000000..c0703415d60
--- /dev/null
+++ b/arch/powerpc/configs/mpc8360emds_defconfig
@@ -0,0 +1,1018 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18
+# Thu Sep 21 18:14:27 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_QUICC_ENGINE=y
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_MPC834x_ITX is not set
+CONFIG_MPC8360E_PB=y
+CONFIG_PPC_MPC836x=y
+# CONFIG_MPIC is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_NAPI is not set
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMOND is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# QE Options
+#
+# CONFIG_UCC_SLOW is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 190a57e2076..47a613cdd77 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -763,10 +763,10 @@ struct cpu_spec cpu_specs[] = {
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
- { /* e300 (a 603e core, plus some) on 83xx */
+ { /* e300c1 (a 603e core, plus some) on 83xx */
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00830000,
- .cpu_name = "e300",
+ .cpu_name = "e300c1",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
.icache_bsize = 32,
@@ -774,6 +774,17 @@ struct cpu_spec cpu_specs[] = {
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
+ { /* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */
+ .pvr_mask = 0x7fff0000,
+ .pvr_value = 0x00840000,
+ .cpu_name = "e300c2",
+ .cpu_features = CPU_FTRS_E300,
+ .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_603,
+ .platform = "ppc603",
+ },
{ /* default match, we assume split I/D cache & TB (non-601)... */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2cd872b5283..748e74fcf54 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -27,10 +27,7 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
-
-#ifdef CONFIG_PPC_ISERIES
-#define DO_SOFT_DISABLE
-#endif
+#include <asm/firmware.h>
/*
* System calls.
@@ -91,6 +88,7 @@ system_call_common:
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
/* Hack for handling interrupts when soft-enabling on iSeries */
cmpdi cr1,r0,0x5555 /* syscall 0x5555 */
andi. r10,r12,MSR_PR /* from kernel */
@@ -98,6 +96,7 @@ system_call_common:
beq hardware_interrupt_entry
lbz r10,PACAPROCENABLED(r13)
std r10,SOFTE(r1)
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mfmsr r11
ori r11,r11,MSR_EE
@@ -462,6 +461,7 @@ _GLOBAL(ret_from_except_lite)
restore:
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
ld r5,SOFTE(r1)
cmpdi 0,r5,0
beq 4f
@@ -480,6 +480,7 @@ restore:
b .ret_from_except_lite /* loop back and handle more */
4: stb r5,PACAPROCENABLED(r13)
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
ld r3,_MSR(r1)
@@ -538,18 +539,23 @@ do_work:
lwz r8,TI_PREEMPT(r9)
cmpwi cr1,r8,0
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
ld r0,SOFTE(r1)
cmpdi r0,0
-#else
- andi. r0,r3,MSR_EE
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
+BEGIN_FW_FTR_SECTION
+ andi. r0,r3,MSR_EE
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
crandc eq,cr1*4+eq,eq
bne restore
/* here we are preempting the current task */
1:
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
li r0,1
stb r0,PACAPROCENABLED(r13)
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
ori r10,r10,MSR_EE
mtmsrd r10,1 /* reenable interrupts */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3065b472b95..645c7f10fb2 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -33,6 +33,7 @@
#include <asm/hvcall.h>
#include <asm/iseries/lpar_map.h>
#include <asm/thread_info.h>
+#include <asm/firmware.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
@@ -365,19 +366,28 @@ label##_iSeries: \
#ifdef DO_SOFT_DISABLE
#define DISABLE_INTS \
+BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
li r11,0; \
std r10,SOFTE(r1); \
mfmsr r10; \
stb r11,PACAPROCENABLED(r13); \
ori r10,r10,MSR_EE; \
- mtmsrd r10,1
+ mtmsrd r10,1; \
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#define ENABLE_INTS \
+BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
mfmsr r11; \
std r10,SOFTE(r1); \
ori r11,r11,MSR_EE; \
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \
+BEGIN_FW_FTR_SECTION; \
+ ld r12,_MSR(r1); \
+ mfmsr r11; \
+ rlwimi r11,r12,0,MSR_EE; \
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
mtmsrd r11,1
#else /* hard enable/disable interrupts */
@@ -1071,8 +1081,10 @@ _GLOBAL(slb_miss_realmode)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
ld r11,PACALPPACAPTR(r13)
ld r11,LPPACASRR0(r11) /* get SRR0 value */
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
mtlr r10
@@ -1087,8 +1099,10 @@ _GLOBAL(slb_miss_realmode)
.machine pop
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
@@ -1301,6 +1315,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
cmpdi r3,0 /* see if hash_page succeeded */
#ifdef DO_SOFT_DISABLE
+BEGIN_FW_FTR_SECTION
/*
* If we had interrupts soft-enabled at the point where the
* DSI/ISI occurred, and an interrupt came in during hash_page,
@@ -1321,12 +1336,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
ld r3,SOFTE(r1)
bl .local_irq_restore
b 11f
-#else
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif
+BEGIN_FW_FTR_SECTION
beq fast_exception_return /* Return from exception on success */
ble- 12f /* Failure return from hash_page */
/* fall through */
-#endif
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/* Here we have a page fault that hash_page can't handle. */
_GLOBAL(handle_page_fault)
@@ -1861,7 +1878,9 @@ _GLOBAL(__secondary_start)
LOAD_REG_ADDR(r3, .start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
#ifdef DO_SOFT_DISABLE
+BEGIN_FW_FTR_SECTION
ori r4,r4,MSR_EE
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
@@ -1986,6 +2005,7 @@ _STATIC(start_here_common)
*/
li r3,0
bl .do_cpu_ftr_fixups
+ bl .do_fw_ftr_fixups
/* ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
@@ -2000,11 +2020,13 @@ _STATIC(start_here_common)
/* Load up the kernel context */
5:
#ifdef DO_SOFT_DISABLE
+BEGIN_FW_FTR_SECTION
li r5,0
stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
mfmsr r5
ori r5,r5,MSR_EE /* Hard Enabled */
mtmsrd r5
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
bl .start_kernel
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 9c54eccad99..41521b30c3c 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -325,6 +325,52 @@ _GLOBAL(do_cpu_ftr_fixups)
isync
b 1b
+/*
+ * do_fw_ftr_fixups - goes through the list of firmware feature fixups
+ * and writes nop's over sections of code that don't apply for this firmware.
+ * r3 = data offset (not changed)
+ */
+_GLOBAL(do_fw_ftr_fixups)
+ /* Get firmware features */
+ LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features)
+ sub r6,r6,r3
+ ld r4,0(r6)
+ /* Get the fixup table */
+ LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup)
+ sub r6,r6,r3
+ LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup)
+ sub r7,r7,r3
+ /* Do the fixup */
+1: cmpld r6,r7
+ bgelr
+ addi r6,r6,32
+ ld r8,-32(r6) /* mask */
+ and r8,r8,r4
+ ld r9,-24(r6) /* value */
+ cmpld r8,r9
+ beq 1b
+ ld r8,-16(r6) /* section begin */
+ ld r9,-8(r6) /* section end */
+ subf. r9,r8,r9
+ beq 1b
+ /* write nops over the section of code */
+ /* todo: if large section, add a branch at the start of it */
+ srwi r9,r9,2
+ mtctr r9
+ sub r8,r8,r3
+ lis r0,0x60000000@h /* nop */
+3: stw r0,0(r8)
+BEGIN_FTR_SECTION
+ dcbst 0,r8 /* suboptimal, but simpler */
+ sync
+ icbi 0,r8
+END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE)
+ addi r8,r8,4
+ bdnz 3b
+ sync /* additional sync needed on g4 */
+ isync
+ b 1b
+
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
* Do an IO access in real mode
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index c1b1e14775e..78d3c0fc8df 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -30,6 +30,7 @@
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
+#include <asm/firmware.h>
#ifdef DEBUG
#include <asm/udbg.h>
@@ -209,7 +210,6 @@ void pcibios_free_controller(struct pci_controller *phb)
kfree(phb);
}
-#ifndef CONFIG_PPC_ISERIES
void __devinit pcibios_claim_one_bus(struct pci_bus *b)
{
struct pci_dev *dev;
@@ -238,10 +238,12 @@ static void __init pcibios_claim_of_setup(void)
{
struct pci_bus *b;
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return;
+
list_for_each_entry(b, &pci_root_buses, node)
pcibios_claim_one_bus(b);
}
-#endif
#ifdef CONFIG_PPC_MULTIPLATFORM
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
@@ -554,9 +556,8 @@ static int __init pcibios_init(void)
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-#ifdef CONFIG_PPC_ISERIES
- iSeries_pcibios_init();
-#endif
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ iSeries_pcibios_init();
printk(KERN_DEBUG "PCI: Probing PCI hardware\n");
@@ -566,15 +567,15 @@ static int __init pcibios_init(void)
pci_bus_add_devices(hose->bus);
}
-#ifndef CONFIG_PPC_ISERIES
- if (pci_probe_only)
- pcibios_claim_of_setup();
- else
- /* FIXME: `else' will be removed when
- pci_assign_unassigned_resources() is able to work
- correctly with [partially] allocated PCI tree. */
- pci_assign_unassigned_resources();
-#endif /* !CONFIG_PPC_ISERIES */
+ if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+ if (pci_probe_only)
+ pcibios_claim_of_setup();
+ else
+ /* FIXME: `else' will be removed when
+ pci_assign_unassigned_resources() is able to work
+ correctly with [partially] allocated PCI tree. */
+ pci_assign_unassigned_resources();
+ }
/* Call machine dependent final fixup */
if (ppc_md.pcibios_fixup)
@@ -586,8 +587,9 @@ static int __init pcibios_init(void)
printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
#ifdef CONFIG_PPC_MULTIPLATFORM
- /* map in PCI I/O space */
- phbs_remap_io();
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ /* map in PCI I/O space */
+ phbs_remap_io();
#endif
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
@@ -637,13 +639,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
*/
int pci_domain_nr(struct pci_bus *bus)
{
-#ifdef CONFIG_PPC_ISERIES
- return 0;
-#else
- struct pci_controller *hose = pci_bus_to_host(bus);
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+ else {
+ struct pci_controller *hose = pci_bus_to_host(bus);
- return hose->global_number;
-#endif
+ return hose->global_number;
+ }
}
EXPORT_SYMBOL(pci_domain_nr);
@@ -651,12 +653,12 @@ EXPORT_SYMBOL(pci_domain_nr);
/* Decide whether to display the domain number in /proc */
int pci_proc_domain(struct pci_bus *bus)
{
-#ifdef CONFIG_PPC_ISERIES
- return 0;
-#else
- struct pci_controller *hose = pci_bus_to_host(bus);
- return hose->buid;
-#endif
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return 0;
+ else {
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ return hose->buid;
+ }
}
/*
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 0af3fc1bdcc..89cfaf49d3d 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -442,31 +442,6 @@ void __init smp_setup_cpu_maps(void)
}
#endif /* CONFIG_SMP */
-int __initdata do_early_xmon;
-#ifdef CONFIG_XMON
-extern int xmon_no_auto_backtrace;
-
-static int __init early_xmon(char *p)
-{
- /* ensure xmon is enabled */
- if (p) {
- if (strncmp(p, "on", 2) == 0)
- xmon_init(1);
- if (strncmp(p, "off", 3) == 0)
- xmon_init(0);
- if (strncmp(p, "nobt", 4) == 0)
- xmon_no_auto_backtrace = 1;
- if (strncmp(p, "early", 5) != 0)
- return 0;
- }
- xmon_init(1);
- do_early_xmon = 1;
-
- return 0;
-}
-early_param("xmon", early_xmon);
-#endif
-
static __init int add_pcspkr(void)
{
struct device_node *np;
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 79a17795d17..191d0ab0922 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -238,12 +238,11 @@ void __init setup_arch(char **cmdline_p)
smp_setup_cpu_maps();
-#ifdef CONFIG_XMON_DEFAULT
- xmon_init(1);
-#endif
/* Register early console */
register_early_udbg_console();
+ xmon_setup();
+
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
ppc_md.kgdb_map_scc();
@@ -280,9 +279,6 @@ void __init setup_arch(char **cmdline_p)
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
- if (do_early_xmon)
- debugger(NULL);
-
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index cda2dbe70a7..4b2e32eab9d 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -391,18 +391,14 @@ void __init setup_system(void)
find_legacy_serial_ports();
/*
- * Initialize xmon
- */
-#ifdef CONFIG_XMON_DEFAULT
- xmon_init(1);
-#endif
- /*
* Register early console
*/
register_early_udbg_console();
- if (do_early_xmon)
- debugger(NULL);
+ /*
+ * Initialize xmon
+ */
+ xmon_setup();
check_smt_enabled();
smp_setup_cpu_maps();
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 02665a02130..cb0e8d46c3e 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -132,6 +132,14 @@ SECTIONS
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
+#ifdef CONFIG_PPC64
+ . = ALIGN(8);
+ __fw_ftr_fixup : {
+ __start___fw_ftr_fixup = .;
+ *(__fw_ftr_fixup)
+ __stop___fw_ftr_fixup = .;
+ }
+#endif
. = ALIGN(PAGE_SIZE);
.init.ramfs : {
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index b1da0316549..ac64f4aaa50 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -63,32 +63,13 @@
#include <asm/iommu.h>
#include <asm/abs_addr.h>
#include <asm/vdso.h>
+#include <asm/firmware.h>
#include "mmu_decl.h"
unsigned long ioremap_bot = IMALLOC_BASE;
static unsigned long phbs_io_bot = PHBS_IO_BASE;
-#ifdef CONFIG_PPC_ISERIES
-
-void __iomem *ioremap(unsigned long addr, unsigned long size)
-{
- return (void __iomem *)addr;
-}
-
-extern void __iomem *__ioremap(unsigned long addr, unsigned long size,
- unsigned long flags)
-{
- return (void __iomem *)addr;
-}
-
-void iounmap(volatile void __iomem *addr)
-{
- return;
-}
-
-#else
-
/*
* map_io_page currently only called by __ioremap
* map_io_page adds an entry to the ioremap page table
@@ -161,6 +142,9 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size,
unsigned long pa, ea;
void __iomem *ret;
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return (void __iomem *)addr;
+
/*
* Choose an address to map it to.
* Once the imalloc system is running, we use it.
@@ -255,6 +239,9 @@ void iounmap(volatile void __iomem *token)
{
void *addr;
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return;
+
if (!mem_init_done)
return;
@@ -315,8 +302,6 @@ int iounmap_explicit(volatile void __iomem *start, unsigned long size)
return 0;
}
-#endif
-
EXPORT_SYMBOL(ioremap);
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index dbc1abbde03..b10e4707d7c 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -21,6 +21,7 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
+#include <asm/firmware.h>
/* void slb_allocate_realmode(unsigned long ea);
*
@@ -183,6 +184,7 @@ slb_finish_load:
* dont have any LRU information to help us choose a slot.
*/
#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
/*
* On iSeries, the "bolted" stack segment can be cast out on
* shared processor switch so we need to check for a miss on
@@ -194,6 +196,7 @@ slb_finish_load:
li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */
cmpld r9,r3
beq 3f
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r10,PACASTABRR(r13)
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
new file mode 100644
index 00000000000..47d841ecf2e
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -0,0 +1,21 @@
+menu "Platform support"
+ depends on PPC_82xx
+
+choice
+ prompt "Machine Type"
+ default MPC82xx_ADS
+
+config MPC82xx_ADS
+ bool "Freescale MPC82xx ADS"
+ select DEFAULT_UIMAGE
+ select PQ2ADS
+ select 8272
+ select 8260
+ select CPM2
+ select FSL_SOC
+ help
+ This option enables support for the MPC8272 ADS board
+
+endchoice
+
+endmenu
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
new file mode 100644
index 00000000000..d9fd4c84d2e
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the PowerPC 82xx linux kernel.
+#
+obj-$(CONFIG_PPC_82xx) += mpc82xx.o
+obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o
diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h
new file mode 100644
index 00000000000..9cd8893b5a3
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/m82xx_pci.h
@@ -0,0 +1,19 @@
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/m8260_pci.h>
+
+#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c
new file mode 100644
index 00000000000..89d702de486
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/mpc82xx.c
@@ -0,0 +1,111 @@
+/*
+ * MPC82xx setup and early boot code plus other random bits.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+#include <linux/fs_uart_pd.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc8260.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/i8259.h>
+#include <linux/fs_enet_pd.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2ads_pd.h"
+
+static int __init get_freq(char *name, unsigned long *val)
+{
+ struct device_node *cpu;
+ unsigned int *fp;
+ int found = 0;
+
+ /* The cpu node should have timebase and clock frequency properties */
+ cpu = of_find_node_by_type(NULL, "cpu");
+
+ if (cpu) {
+ fp = (unsigned int *)get_property(cpu, name, NULL);
+ if (fp) {
+ found = 1;
+ *val = *fp++;
+ }
+
+ of_node_put(cpu);
+ }
+
+ return found;
+}
+
+void __init m82xx_calibrate_decr(void)
+{
+ ppc_tb_freq = 125000000;
+ if (!get_freq("bus-frequency", &ppc_tb_freq)) {
+ printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+ "(not found)\n");
+ }
+ ppc_tb_freq /= 4;
+ ppc_proc_freq = 1000000000;
+ if (!get_freq("clock-frequency", &ppc_proc_freq))
+ printk(KERN_ERR "WARNING: Estimating processor frequency"
+ "(not found)\n");
+}
+
+void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
new file mode 100644
index 00000000000..4276f087f26
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -0,0 +1,661 @@
+/*
+ * MPC82xx_ads setup and early boot code plus other random bits.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ * m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
+ *
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+#include <linux/fs_uart_pd.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc8260.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/i8259.h>
+#include <linux/fs_enet_pd.h>
+
+#include <sysdev/fsl_soc.h>
+#include <../sysdev/cpm2_pic.h>
+
+#include "pq2ads_pd.h"
+
+#ifdef CONFIG_PCI
+static uint pci_clk_frq;
+static struct {
+ unsigned long *pci_int_stat_reg;
+ unsigned long *pci_int_mask_reg;
+} pci_regs;
+
+static unsigned long pci_int_base;
+static struct irq_host *pci_pic_host;
+static struct device_node *pci_pic_node;
+#endif
+
+static void __init mpc82xx_ads_pic_init(void)
+{
+ struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
+ struct resource r;
+ cpm2_map_t *cpm_reg;
+
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+ return;
+ }
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "PIC init: invalid resource\n");
+ of_node_put(np);
+ return;
+ }
+ cpm2_pic_init(np);
+ of_node_put(np);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t));
+ cpm_reg->im_intctl.ic_siprr = 0x05309770;
+ iounmap(cpm_reg);
+#ifdef CONFIG_PCI
+ /* Initialize stuff for the 82xx CPLD IC and install demux */
+ m82xx_pci_init_irq();
+#endif
+}
+
+static void init_fcc1_ioports(struct fs_platform_info *fpi)
+{
+ struct io_port *io;
+ u32 tempval;
+ cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+ struct device_node *np;
+ struct resource r;
+ u32 *bcsr;
+
+ np = of_find_node_by_type(NULL, "memory");
+ if (!np) {
+ printk(KERN_INFO "No memory node in device tree\n");
+ return;
+ }
+ if (of_address_to_resource(np, 1, &r)) {
+ printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+ return;
+ }
+ of_node_put(np);
+ bcsr = ioremap(r.start + 4, sizeof(u32));
+ io = &immap->im_ioport;
+
+ /* Enable the PHY */
+ clrbits32(bcsr, BCSR1_FETHIEN);
+ setbits32(bcsr, BCSR1_FETH_RST);
+
+ /* FCC1 pins are on port A/C. */
+ /* Configure port A and C pins for FCC1 Ethernet. */
+
+ tempval = in_be32(&io->iop_pdira);
+ tempval &= ~PA1_DIRA0;
+ tempval |= PA1_DIRA1;
+ out_be32(&io->iop_pdira, tempval);
+
+ tempval = in_be32(&io->iop_psora);
+ tempval &= ~PA1_PSORA0;
+ tempval |= PA1_PSORA1;
+ out_be32(&io->iop_psora, tempval);
+
+ setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1);
+
+ /* Alter clocks */
+ tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
+
+ clrbits32(&io->iop_psorc, tempval);
+ clrbits32(&io->iop_pdirc, tempval);
+ setbits32(&io->iop_pparc, tempval);
+
+ cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX);
+
+ iounmap(bcsr);
+ iounmap(immap);
+}
+
+static void init_fcc2_ioports(struct fs_platform_info *fpi)
+{
+ cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+ struct device_node *np;
+ struct resource r;
+ u32 *bcsr;
+
+ struct io_port *io;
+ u32 tempval;
+
+ np = of_find_node_by_type(NULL, "memory");
+ if (!np) {
+ printk(KERN_INFO "No memory node in device tree\n");
+ return;
+ }
+ if (of_address_to_resource(np, 1, &r)) {
+ printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+ return;
+ }
+ of_node_put(np);
+ io = &immap->im_ioport;
+ bcsr = ioremap(r.start + 12, sizeof(u32));
+
+ /* Enable the PHY */
+ clrbits32(bcsr, BCSR3_FETHIEN2);
+ setbits32(bcsr, BCSR3_FETH2_RST);
+
+ /* FCC2 are port B/C. */
+ /* Configure port A and C pins for FCC2 Ethernet. */
+
+ tempval = in_be32(&io->iop_pdirb);
+ tempval &= ~PB2_DIRB0;
+ tempval |= PB2_DIRB1;
+ out_be32(&io->iop_pdirb, tempval);
+
+ tempval = in_be32(&io->iop_psorb);
+ tempval &= ~PB2_PSORB0;
+ tempval |= PB2_PSORB1;
+ out_be32(&io->iop_psorb, tempval);
+
+ setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1);
+
+ tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
+
+ /* Alter clocks */
+ clrbits32(&io->iop_psorc, tempval);
+ clrbits32(&io->iop_pdirc, tempval);
+ setbits32(&io->iop_pparc, tempval);
+
+ cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX);
+
+ iounmap(bcsr);
+ iounmap(immap);
+}
+
+void init_fcc_ioports(struct fs_platform_info *fpi)
+{
+ int fcc_no = fs_get_fcc_index(fpi->fs_no);
+
+ switch (fcc_no) {
+ case 0:
+ init_fcc1_ioports(fpi);
+ break;
+ case 1:
+ init_fcc2_ioports(fpi);
+ break;
+ default:
+ printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
+ return;
+ }
+}
+
+static void init_scc1_uart_ioports(struct fs_uart_platform_info *data)
+{
+ cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+
+ /* SCC1 is only on port D */
+ setbits32(&immap->im_ioport.iop_ppard, 0x00000003);
+ clrbits32(&immap->im_ioport.iop_psord, 0x00000001);
+ setbits32(&immap->im_ioport.iop_psord, 0x00000002);
+ clrbits32(&immap->im_ioport.iop_pdird, 0x00000001);
+ setbits32(&immap->im_ioport.iop_pdird, 0x00000002);
+
+ clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
+ clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
+ setbits32(&immap->im_cpmux.cmx_scr,
+ ((data->clk_tx - 1) << (4 - data->clk_tx)));
+ setbits32(&immap->im_cpmux.cmx_scr,
+ ((data->clk_rx - 1) << (4 - data->clk_rx)));
+
+ iounmap(immap);
+}
+
+static void init_scc4_uart_ioports(struct fs_uart_platform_info *data)
+{
+ cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+
+ setbits32(&immap->im_ioport.iop_ppard, 0x00000600);
+ clrbits32(&immap->im_ioport.iop_psord, 0x00000600);
+ clrbits32(&immap->im_ioport.iop_pdird, 0x00000200);
+ setbits32(&immap->im_ioport.iop_pdird, 0x00000400);
+
+ clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
+ clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
+ setbits32(&immap->im_cpmux.cmx_scr,
+ ((data->clk_tx - 1) << (4 - data->clk_tx)));
+ setbits32(&immap->im_cpmux.cmx_scr,
+ ((data->clk_rx - 1) << (4 - data->clk_rx)));
+
+ iounmap(immap);
+}
+
+void init_scc_ioports(struct fs_uart_platform_info *data)
+{
+ int scc_no = fs_get_scc_index(data->fs_no);
+
+ switch (scc_no) {
+ case 0:
+ init_scc1_uart_ioports(data);
+ data->brg = data->clk_rx;
+ break;
+ case 3:
+ init_scc4_uart_ioports(data);
+ data->brg = data->clk_rx;
+ break;
+ default:
+ printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
+ return;
+ }
+}
+
+void __init m82xx_board_setup(void)
+{
+ cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
+ struct device_node *np;
+ struct resource r;
+ u32 *bcsr;
+
+ np = of_find_node_by_type(NULL, "memory");
+ if (!np) {
+ printk(KERN_INFO "No memory node in device tree\n");
+ return;
+ }
+ if (of_address_to_resource(np, 1, &r)) {
+ printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+ return;
+ }
+ of_node_put(np);
+ bcsr = ioremap(r.start + 4, sizeof(u32));
+ /* Enable the 2nd UART port */
+ clrbits32(bcsr, BCSR1_RS232_EN2);
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+ clrbits32((u32 *) & immap->im_scc[0].scc_sccm,
+ UART_SCCM_TX | UART_SCCM_RX);
+ clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl,
+ SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+ clrbits32((u32 *) & immap->im_scc[1].scc_sccm,
+ UART_SCCM_TX | UART_SCCM_RX);
+ clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl,
+ SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+ clrbits32((u32 *) & immap->im_scc[2].scc_sccm,
+ UART_SCCM_TX | UART_SCCM_RX);
+ clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl,
+ SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+ clrbits32((u32 *) & immap->im_scc[3].scc_sccm,
+ UART_SCCM_TX | UART_SCCM_RX);
+ clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl,
+ SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+ iounmap(bcsr);
+ iounmap(immap);
+}
+
+#ifdef CONFIG_PCI
+static void m82xx_pci_mask_irq(unsigned int irq)
+{
+ int bit = irq - pci_int_base;
+
+ *pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
+ return;
+}
+
+static void m82xx_pci_unmask_irq(unsigned int irq)
+{
+ int bit = irq - pci_int_base;
+
+ *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
+ return;
+}
+
+static void m82xx_pci_mask_and_ack(unsigned int irq)
+{
+ int bit = irq - pci_int_base;
+
+ *pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
+ return;
+}
+
+static void m82xx_pci_end_irq(unsigned int irq)
+{
+ int bit = irq - pci_int_base;
+
+ *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
+ return;
+}
+
+struct hw_interrupt_type m82xx_pci_ic = {
+ .typename = "MPC82xx ADS PCI",
+ .name = "MPC82xx ADS PCI",
+ .enable = m82xx_pci_unmask_irq,
+ .disable = m82xx_pci_mask_irq,
+ .ack = m82xx_pci_mask_and_ack,
+ .end = m82xx_pci_end_irq,
+ .mask = m82xx_pci_mask_irq,
+ .mask_ack = m82xx_pci_mask_and_ack,
+ .unmask = m82xx_pci_unmask_irq,
+ .eoi = m82xx_pci_end_irq,
+};
+
+static void
+m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ unsigned long stat, mask, pend;
+ int bit;
+
+ for (;;) {
+ stat = *pci_regs.pci_int_stat_reg;
+ mask = *pci_regs.pci_int_mask_reg;
+ pend = stat & ~mask & 0xf0000000;
+ if (!pend)
+ break;
+ for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+ if (pend & 0x80000000)
+ __do_IRQ(pci_int_base + bit, regs);
+ }
+ }
+}
+
+static int pci_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+ return node == pci_pic_node;
+}
+
+static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip(virq, &m82xx_pci_ic);
+ return 0;
+}
+
+static void pci_host_unmap(struct irq_host *h, unsigned int virq)
+{
+ /* remove chip and handler */
+ set_irq_chip(virq, NULL);
+}
+
+static struct irq_host_ops pci_pic_host_ops = {
+ .match = pci_pic_host_match,
+ .map = pci_pic_host_map,
+ .unmap = pci_host_unmap,
+};
+
+void m82xx_pci_init_irq(void)
+{
+ int irq;
+ cpm2_map_t *immap;
+ struct device_node *np;
+ struct resource r;
+ const u32 *regs;
+ unsigned int size;
+ const u32 *irq_map;
+ int i;
+ unsigned int irq_max, irq_min;
+
+ if ((np = of_find_node_by_type(NULL, "soc")) == NULL) {
+ printk(KERN_INFO "No SOC node in device tree\n");
+ return;
+ }
+ memset(&r, 0, sizeof(r));
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_INFO "No SOC reg property in device tree\n");
+ return;
+ }
+ immap = ioremap(r.start, sizeof(*immap));
+ of_node_put(np);
+
+ /* install the demultiplexer for the PCI cascade interrupt */
+ np = of_find_node_by_type(NULL, "pci");
+ if (!np) {
+ printk(KERN_INFO "No pci node on device tree\n");
+ iounmap(immap);
+ return;
+ }
+ irq_map = get_property(np, "interrupt-map", &size);
+ if ((!irq_map) || (size <= 7)) {
+ printk(KERN_INFO "No interrupt-map property of pci node\n");
+ iounmap(immap);
+ return;
+ }
+ size /= sizeof(irq_map[0]);
+ for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) {
+ if (irq_map[5] < irq_min)
+ irq_min = irq_map[5];
+ if (irq_map[5] > irq_max)
+ irq_max = irq_map[5];
+ }
+ pci_int_base = irq_min;
+ irq = irq_of_parse_and_map(np, 0);
+ set_irq_chained_handler(irq, m82xx_pci_irq_demux);
+ of_node_put(np);
+ np = of_find_node_by_type(NULL, "pci-pic");
+ if (!np) {
+ printk(KERN_INFO "No pci pic node on device tree\n");
+ iounmap(immap);
+ return;
+ }
+ pci_pic_node = of_node_get(np);
+ /* PCI interrupt controller registers: status and mask */
+ regs = get_property(np, "reg", &size);
+ if ((!regs) || (size <= 2)) {
+ printk(KERN_INFO "No reg property in pci pic node\n");
+ iounmap(immap);
+ return;
+ }
+ pci_regs.pci_int_stat_reg =
+ ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg));
+ pci_regs.pci_int_mask_reg =
+ ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg));
+ of_node_put(np);
+ /* configure chip select for PCI interrupt controller */
+ immap->im_memctl.memc_br3 = regs[0] | 0x00001801;
+ immap->im_memctl.memc_or3 = 0xffff8010;
+ /* make PCI IRQ level sensitive */
+ immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1)));
+
+ /* mask all PCI interrupts */
+ *pci_regs.pci_int_mask_reg |= 0xfff00000;
+ iounmap(immap);
+ pci_pic_host =
+ irq_alloc_host(IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1,
+ &pci_pic_host_ops, irq_max + 1);
+ return;
+}
+
+static int m82xx_pci_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void
+__init mpc82xx_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev) {
+ pci_read_irq_line(dev);
+ }
+}
+
+void __init add_bridge(struct device_node *np)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource r;
+ const int *bus_range;
+ const void *ptr;
+
+ memset(&r, 0, sizeof(r));
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_INFO "No PCI reg property in device tree\n");
+ return;
+ }
+ if (!(ptr = get_property(np, "clock-frequency", NULL))) {
+ printk(KERN_INFO "No clock-frequency property in PCI node");
+ return;
+ }
+ pci_clk_frq = *(uint *) ptr;
+ of_node_put(np);
+ bus_range = get_property(np, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", np->full_name);
+ }
+
+ pci_assign_all_buses = 1;
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ hose->arch_data = np;
+ hose->set_cfg_type = 1;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ hose->bus_offset = 0;
+
+ hose->set_cfg_type = 1;
+
+ setup_indirect_pci(hose,
+ r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
+ r.start + offsetof(pci_cpm2_t, pci_cfg_data));
+
+ pci_process_bridge_OF_ranges(hose, np, 1);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc82xx_ads_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc82xx_ads_setup_arch()", 0);
+ cpm2_reset();
+
+ /* Map I/O region to a 256MB BAT */
+
+ m82xx_board_setup();
+
+#ifdef CONFIG_PCI
+ ppc_md.pci_exclude_device = m82xx_pci_exclude_device;
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ of_node_put(np);
+ ppc_md.pci_map_irq = NULL;
+ ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup;
+ ppc_md.pcibios_fixup_bus = NULL;
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc82xx_ads_probe(void)
+{
+ /* We always match for now, eventually we should look at
+ * the flat dev tree to ensure this is the board we are
+ * supposed to run on
+ */
+ return 1;
+}
+
+#define RMR_CSRE 0x00000001
+static void m82xx_restart(char *cmd)
+{
+ __volatile__ unsigned char dummy;
+
+ local_irq_disable();
+ ((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
+
+ /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
+ mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
+ dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
+ printk("Restart failed\n");
+ while (1) ;
+}
+
+static void m82xx_halt(void)
+{
+ local_irq_disable();
+ while (1) ;
+}
+
+define_machine(mpc82xx_ads)
+{
+ .name = "MPC82xx ADS",
+ .probe = mpc82xx_ads_probe,
+ .setup_arch = mpc82xx_ads_setup_arch,
+ .init_IRQ = mpc82xx_ads_pic_init,
+ .show_cpuinfo = mpc82xx_ads_show_cpuinfo,
+ .get_irq = cpm2_get_irq,
+ .calibrate_decr = m82xx_calibrate_decr,
+ .restart = m82xx_restart,.halt = m82xx_halt,
+};
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
new file mode 100644
index 00000000000..a7348213508
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -0,0 +1,67 @@
+/*
+ * PQ2/mpc8260 board-specific stuff
+ *
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC8260ADS/MPC8266ADS-PCI boards.
+ * Copied from the RPX-Classic and SBS8260 stuff.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Originally written by Dan Malek for Motorola MPC8260 family
+ *
+ * Copyright (c) 2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MACH_ADS8260_DEFS
+#define __MACH_ADS8260_DEFS
+
+#include <linux/config.h>
+
+#include <asm/ppcboot.h>
+
+/* For our show_cpuinfo hooks. */
+#define CPUINFO_VENDOR "Freescale Semiconductor"
+#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
+
+/* Backword-compatibility stuff for the drivers */
+#define CPM_MAP_ADDR ((uint)0xf0000000)
+#define CPM_IRQ_OFFSET 0
+
+/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
+ * only on word boundaries.
+ * Not all are used (yet), or are interesting to us (yet).
+ */
+
+/* Things of interest in the CSR.
+ */
+#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
+#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
+#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable*/
+#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
+#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */
+#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */
+#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/
+#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */
+
+/* cpm serial driver works with constants below */
+
+#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
+
+void m82xx_pci_init_irq(void);
+void mpc82xx_ads_show_cpuinfo(struct seq_file*);
+void m82xx_calibrate_decr(void);
+
+#endif /* __MACH_ADS8260_DEFS */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 5fe7b7faf45..0975e94ac7c 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -5,6 +5,13 @@ choice
prompt "Machine Type"
default MPC834x_SYS
+config MPC832x_MDS
+ bool "Freescale MPC832x MDS"
+ select DEFAULT_UIMAGE
+ select QUICC_ENGINE
+ help
+ This option enables support for the MPC832x MDS evaluation board.
+
config MPC834x_SYS
bool "Freescale MPC834x SYS"
select DEFAULT_UIMAGE
@@ -27,6 +34,12 @@ config MPC834x_ITX
endchoice
+config PPC_MPC832x
+ bool
+ select PPC_UDBG_16550
+ select PPC_INDIRECT_PCI
+ default y if MPC832x_MDS
+
config MPC834x
bool
select PPC_UDBG_16550
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
new file mode 100644
index 00000000000..54dea9d42dc
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * MPC832xE MDS board specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+#include "mpc832x_mds.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+static u8 *bcsr_regs = NULL;
+
+u8 *get_bcsr(void)
+{
+ return bcsr_regs;
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc832x_sys_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc832x_sys_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != 0) {
+ unsigned int *fp =
+ (int *)get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np != 0) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, res.end - res.start +1);
+ of_node_put(np);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+ par_io_init(np);
+ of_node_put(np);
+
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ par_io_of_config(np);
+ }
+
+ if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
+ != NULL){
+ /* Reset the Ethernet PHY */
+ bcsr_regs[9] &= ~0x20;
+ udelay(1000);
+ bcsr_regs[9] |= 0x20;
+ iounmap(bcsr_regs);
+ of_node_put(np);
+ }
+
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc832x_sys_init_IRQ(void)
+{
+
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+ of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+
+ qe_ic_init(np, 0);
+ of_node_put(np);
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
+extern ulong ds1374_get_rtc_time(void);
+extern int ds1374_set_rtc_time(ulong);
+
+static int __init mpc832x_rtc_hookup(void)
+{
+ struct timespec tv;
+
+ ppc_md.get_rtc_time = ds1374_get_rtc_time;
+ ppc_md.set_rtc_time = ds1374_set_rtc_time;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = (ppc_md.get_rtc_time) ();
+ do_settimeofday(&tv);
+
+ return 0;
+}
+
+late_initcall(mpc832x_rtc_hookup);
+#endif
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc832x_sys_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "MPC8323EMDS"))
+ return 0;
+
+ DBG("%s found\n", model);
+
+ return 1;
+}
+
+define_machine(mpc832x_mds) {
+ .name = "MPC832x MDS",
+ .probe = mpc832x_sys_probe,
+ .setup_arch = mpc832x_sys_setup_arch,
+ .init_IRQ = mpc832x_sys_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.h b/arch/powerpc/platforms/83xx/mpc832x_mds.h
new file mode 100644
index 00000000000..a49588904f8
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * MPC832x MDS board specific header.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC832x_MDS_H__
+#define __MACH_MPC832x_MDS_H__
+
+extern u8 *get_bcsr(void);
+
+#endif /* __MACH_MPC832x_MDS_H__ */
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
new file mode 100644
index 00000000000..c0191900fc2
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8360E MDS PB board specific routines.
+ *
+ * Changelog:
+ * Jun 21, 2006 Initial version
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+static u8 *bcsr_regs = NULL;
+
+u8 *get_bcsr(void)
+{
+ return bcsr_regs;
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8360_sys_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8360_sys_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != 0) {
+ const unsigned int *fp =
+ get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np != 0) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, res.end - res.start +1);
+ of_node_put(np);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+ par_io_init(np);
+ of_node_put(np);
+
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ par_io_of_config(np);
+ }
+
+ if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
+ != NULL){
+ /* Reset the Ethernet PHY */
+ bcsr_regs[9] &= ~0x20;
+ udelay(1000);
+ bcsr_regs[9] |= 0x20;
+ iounmap(bcsr_regs);
+ of_node_put(np);
+ }
+
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc8360_sys_init_IRQ(void)
+{
+
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+ of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+
+ qe_ic_init(np, 0);
+ of_node_put(np);
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
+extern ulong ds1374_get_rtc_time(void);
+extern int ds1374_set_rtc_time(ulong);
+
+static int __init mpc8360_rtc_hookup(void)
+{
+ struct timespec tv;
+
+ ppc_md.get_rtc_time = ds1374_get_rtc_time;
+ ppc_md.set_rtc_time = ds1374_set_rtc_time;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = (ppc_md.get_rtc_time) ();
+ do_settimeofday(&tv);
+
+ return 0;
+}
+
+late_initcall(mpc8360_rtc_hookup);
+#endif
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc8360_sys_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "MPC8360EPB"))
+ return 0;
+
+ DBG("MPC8360EMDS-PB found\n");
+
+ return 1;
+}
+
+define_machine(mpc8360_sys) {
+ .name = "MPC8360E PB",
+ .probe = mpc8360_sys_probe,
+ .setup_arch = mpc8360_sys_setup_arch,
+ .init_IRQ = mpc8360_sys_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 6b57a47c5d3..6cc59e0b458 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -21,6 +21,12 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - Fix various assumptions related to HW CPU numbers vs. linux CPU numbers
+ * vs node numbers in the setup code
+ * - Implement proper handling of maxcpus=1/2 (that is, routing of irqs from
+ * a non-active node to the active node)
*/
#include <linux/interrupt.h>
@@ -44,24 +50,25 @@ struct iic {
u8 target_id;
u8 eoi_stack[16];
int eoi_ptr;
- struct irq_host *host;
+ struct device_node *node;
};
static DEFINE_PER_CPU(struct iic, iic);
#define IIC_NODE_COUNT 2
-static struct irq_host *iic_hosts[IIC_NODE_COUNT];
+static struct irq_host *iic_host;
/* Convert between "pending" bits and hw irq number */
static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
{
unsigned char unit = bits.source & 0xf;
+ unsigned char node = bits.source >> 4;
+ unsigned char class = bits.class & 3;
+ /* Decode IPIs */
if (bits.flags & CBE_IIC_IRQ_IPI)
- return IIC_IRQ_IPI0 | (bits.prio >> 4);
- else if (bits.class <= 3)
- return (bits.class << 4) | unit;
+ return IIC_IRQ_TYPE_IPI | (bits.prio >> 4);
else
- return IIC_IRQ_INVALID;
+ return (node << IIC_IRQ_NODE_SHIFT) | (class << 4) | unit;
}
static void iic_mask(unsigned int irq)
@@ -86,21 +93,70 @@ static struct irq_chip iic_chip = {
.eoi = iic_eoi,
};
+
+static void iic_ioexc_eoi(unsigned int irq)
+{
+}
+
+static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct cbe_iic_regs *node_iic = desc->handler_data;
+ unsigned int base = (irq & 0xffffff00) | IIC_IRQ_TYPE_IOEXC;
+ unsigned long bits, ack;
+ int cascade;
+
+ for (;;) {
+ bits = in_be64(&node_iic->iic_is);
+ if (bits == 0)
+ break;
+ /* pre-ack edge interrupts */
+ ack = bits & IIC_ISR_EDGE_MASK;
+ if (ack)
+ out_be64(&node_iic->iic_is, ack);
+ /* handle them */
+ for (cascade = 63; cascade >= 0; cascade--)
+ if (bits & (0x8000000000000000UL >> cascade)) {
+ unsigned int cirq =
+ irq_linear_revmap(iic_host,
+ base | cascade);
+ if (cirq != NO_IRQ)
+ generic_handle_irq(cirq, regs);
+ }
+ /* post-ack level interrupts */
+ ack = bits & ~IIC_ISR_EDGE_MASK;
+ if (ack)
+ out_be64(&node_iic->iic_is, ack);
+ }
+ desc->chip->eoi(irq);
+}
+
+
+static struct irq_chip iic_ioexc_chip = {
+ .typename = " CELL-IOEX",
+ .mask = iic_mask,
+ .unmask = iic_unmask,
+ .eoi = iic_ioexc_eoi,
+};
+
/* Get an IRQ number from the pending state register of the IIC */
static unsigned int iic_get_irq(struct pt_regs *regs)
{
struct cbe_iic_pending_bits pending;
struct iic *iic;
+ unsigned int virq;
iic = &__get_cpu_var(iic);
*(unsigned long *) &pending =
in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+ if (!(pending.flags & CBE_IIC_IRQ_VALID))
+ return NO_IRQ;
+ virq = irq_linear_revmap(iic_host, iic_pending_to_hwnum(pending));
+ if (virq == NO_IRQ)
+ return NO_IRQ;
iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
BUG_ON(iic->eoi_ptr > 15);
- if (pending.flags & CBE_IIC_IRQ_VALID)
- return irq_linear_revmap(iic->host,
- iic_pending_to_hwnum(pending));
- return NO_IRQ;
+ return virq;
}
#ifdef CONFIG_SMP
@@ -108,12 +164,7 @@ static unsigned int iic_get_irq(struct pt_regs *regs)
/* Use the highest interrupt priorities for IPI */
static inline int iic_ipi_to_irq(int ipi)
{
- return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
-}
-
-static inline int iic_irq_to_ipi(int irq)
-{
- return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
+ return IIC_IRQ_TYPE_IPI + 0xf - ipi;
}
void iic_setup_cpu(void)
@@ -123,7 +174,7 @@ void iic_setup_cpu(void)
void iic_cause_IPI(int cpu, int mesg)
{
- out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4);
+ out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4);
}
u8 iic_get_target_id(int cpu)
@@ -134,9 +185,7 @@ EXPORT_SYMBOL_GPL(iic_get_target_id);
struct irq_host *iic_get_irq_host(int node)
{
- if (node < 0 || node >= IIC_NODE_COUNT)
- return NULL;
- return iic_hosts[node];
+ return iic_host;
}
EXPORT_SYMBOL_GPL(iic_get_irq_host);
@@ -149,34 +198,20 @@ static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
-
static void iic_request_ipi(int ipi, const char *name)
{
- int node, virq;
+ int virq;
- for (node = 0; node < IIC_NODE_COUNT; node++) {
- char *rname;
- if (iic_hosts[node] == NULL)
- continue;
- virq = irq_create_mapping(iic_hosts[node],
- iic_ipi_to_irq(ipi));
- if (virq == NO_IRQ) {
- printk(KERN_ERR
- "iic: failed to map IPI %s on node %d\n",
- name, node);
- continue;
- }
- rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
- if (rname)
- sprintf(rname, "%s node %d", name, node);
- else
- rname = (char *)name;
- if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
- rname, (void *)(long)ipi))
- printk(KERN_ERR
- "iic: failed to request IPI %s on node %d\n",
- name, node);
+ virq = irq_create_mapping(iic_host, iic_ipi_to_irq(ipi));
+ if (virq == NO_IRQ) {
+ printk(KERN_ERR
+ "iic: failed to map IPI %s\n", name);
+ return;
}
+ if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, name,
+ (void *)(long)ipi))
+ printk(KERN_ERR
+ "iic: failed to request IPI %s\n", name);
}
void iic_request_IPIs(void)
@@ -193,16 +228,24 @@ void iic_request_IPIs(void)
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
- return h->host_data != NULL && node == h->host_data;
+ return device_is_compatible(node,
+ "IBM,CBEA-Internal-Interrupt-Controller");
}
static int iic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- if (hw < IIC_IRQ_IPI0)
- set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
- else
+ switch (hw & IIC_IRQ_TYPE_MASK) {
+ case IIC_IRQ_TYPE_IPI:
set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
+ break;
+ case IIC_IRQ_TYPE_IOEXC:
+ set_irq_chip_and_handler(virq, &iic_ioexc_chip,
+ handle_fasteoi_irq);
+ break;
+ default:
+ set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
+ }
return 0;
}
@@ -211,11 +254,39 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
- /* Currently, we don't translate anything. That needs to be fixed as
- * we get better defined device-trees. iic interrupts have to be
- * explicitely mapped by whoever needs them
- */
- return -ENODEV;
+ unsigned int node, ext, unit, class;
+ const u32 *val;
+
+ if (!device_is_compatible(ct,
+ "IBM,CBEA-Internal-Interrupt-Controller"))
+ return -ENODEV;
+ if (intsize != 1)
+ return -ENODEV;
+ val = get_property(ct, "#interrupt-cells", NULL);
+ if (val == NULL || *val != 1)
+ return -ENODEV;
+
+ node = intspec[0] >> 24;
+ ext = (intspec[0] >> 16) & 0xff;
+ class = (intspec[0] >> 8) & 0xff;
+ unit = intspec[0] & 0xff;
+
+ /* Check if node is in supported range */
+ if (node > 1)
+ return -EINVAL;
+
+ /* Build up interrupt number, special case for IO exceptions */
+ *out_hwirq = (node << IIC_IRQ_NODE_SHIFT);
+ if (unit == IIC_UNIT_IIC && class == 1)
+ *out_hwirq |= IIC_IRQ_TYPE_IOEXC | ext;
+ else
+ *out_hwirq |= IIC_IRQ_TYPE_NORMAL |
+ (class << IIC_IRQ_CLASS_SHIFT) | unit;
+
+ /* Dummy flags, ignored by iic code */
+ *out_flags = IRQ_TYPE_EDGE_RISING;
+
+ return 0;
}
static struct irq_host_ops iic_host_ops = {
@@ -225,7 +296,7 @@ static struct irq_host_ops iic_host_ops = {
};
static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
- struct irq_host *host)
+ struct device_node *node)
{
/* XXX FIXME: should locate the linux CPU number from the HW cpu
* number properly. We are lucky for now
@@ -237,19 +308,19 @@ static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
iic->eoi_stack[0] = 0xff;
- iic->host = host;
+ iic->node = of_node_get(node);
out_be64(&iic->regs->prio, 0);
- printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
- hw_cpu, addr, iic->regs, iic->target_id);
+ printk(KERN_INFO "IIC for CPU %d target id 0x%x : %s\n",
+ hw_cpu, iic->target_id, node->full_name);
}
static int __init setup_iic(void)
{
struct device_node *dn;
struct resource r0, r1;
- struct irq_host *host;
- int found = 0;
+ unsigned int node, cascade, found = 0;
+ struct cbe_iic_regs *node_iic;
const u32 *np;
for (dn = NULL;
@@ -269,19 +340,33 @@ static int __init setup_iic(void)
of_node_put(dn);
return -ENODEV;
}
- host = NULL;
- if (found < IIC_NODE_COUNT) {
- host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
- IIC_SOURCE_COUNT,
- &iic_host_ops,
- IIC_IRQ_INVALID);
- iic_hosts[found] = host;
- BUG_ON(iic_hosts[found] == NULL);
- iic_hosts[found]->host_data = of_node_get(dn);
- found++;
- }
- init_one_iic(np[0], r0.start, host);
- init_one_iic(np[1], r1.start, host);
+ found++;
+ init_one_iic(np[0], r0.start, dn);
+ init_one_iic(np[1], r1.start, dn);
+
+ /* Setup cascade for IO exceptions. XXX cleanup tricks to get
+ * node vs CPU etc...
+ * Note that we configure the IIC_IRR here with a hard coded
+ * priority of 1. We might want to improve that later.
+ */
+ node = np[0] >> 1;
+ node_iic = cbe_get_cpu_iic_regs(np[0]);
+ cascade = node << IIC_IRQ_NODE_SHIFT;
+ cascade |= 1 << IIC_IRQ_CLASS_SHIFT;
+ cascade |= IIC_UNIT_IIC;
+ cascade = irq_create_mapping(iic_host, cascade);
+ if (cascade == NO_IRQ)
+ continue;
+ set_irq_data(cascade, node_iic);
+ set_irq_chained_handler(cascade , iic_ioexc_cascade);
+ out_be64(&node_iic->iic_ir,
+ (1 << 12) /* priority */ |
+ (node << 4) /* dest node */ |
+ IIC_UNIT_THREAD_0 /* route them to thread 0 */);
+ /* Flush pending (make sure it triggers if there is
+ * anything pending
+ */
+ out_be64(&node_iic->iic_is, 0xfffffffffffffffful);
}
if (found)
@@ -292,6 +377,12 @@ static int __init setup_iic(void)
void __init iic_init_IRQ(void)
{
+ /* Setup an irq host data structure */
+ iic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, IIC_SOURCE_COUNT,
+ &iic_host_ops, IIC_IRQ_INVALID);
+ BUG_ON(iic_host == NULL);
+ irq_set_default_host(iic_host);
+
/* Discover and initialize iics */
if (setup_iic() < 0)
panic("IIC: Failed to initialize !\n");
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 5560a92ec3a..9ba1d3c17b4 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -2,48 +2,76 @@
#define ASM_CELL_PIC_H
#ifdef __KERNEL__
/*
- * Mapping of IIC pending bits into per-node
- * interrupt numbers.
+ * Mapping of IIC pending bits into per-node interrupt numbers.
*
- * IRQ FF CC SS PP FF CC SS PP Description
+ * Interrupt numbers are in the range 0...0x1ff where the top bit
+ * (0x100) represent the source node. Only 2 nodes are supported with
+ * the current code though it's trivial to extend that if necessary using
+ * higher level bits
*
- * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge
- * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge
- * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0
- * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1
- * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2
- * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI
+ * The bottom 8 bits are split into 2 type bits and 6 data bits that
+ * depend on the type:
*
- * F flags
- * C class
- * S source
- * P Priority
- * + node number
- * * don't care
+ * 00 (0x00 | data) : normal interrupt. data is (class << 4) | source
+ * 01 (0x40 | data) : IO exception. data is the exception number as
+ * defined by bit numbers in IIC_SR
+ * 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority)
+ * and node is always 0 (IPIs are per-cpu, their source is
+ * not relevant)
+ * 11 (0xc0 | data) : reserved
*
- * A node consists of a Cell Broadband Engine and an optional
- * south bridge device providing a maximum of 64 IRQs.
- * The south bridge may be connected to either IOIF0
- * or IOIF1.
- * Each SPE is represented as three IRQ lines, one per
- * interrupt class.
- * 16 IRQ numbers are reserved for inter processor
- * interruptions, although these are only used in the
- * range of the first node.
+ * In addition, interrupt number 0x80000000 is defined as always invalid
+ * (that is the node field is expected to never extend to move than 23 bits)
*
- * This scheme needs 128 IRQ numbers per BIF node ID,
- * which means that with the total of 512 lines
- * available, we can have a maximum of four nodes.
*/
enum {
- IIC_IRQ_INVALID = 0xff,
- IIC_IRQ_MAX = 0x3f,
- IIC_IRQ_EXT_IOIF0 = 0x20,
- IIC_IRQ_EXT_IOIF1 = 0x2b,
- IIC_IRQ_IPI0 = 0x40,
- IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
- IIC_SOURCE_COUNT = 0x50,
+ IIC_IRQ_INVALID = 0x80000000u,
+ IIC_IRQ_NODE_MASK = 0x100,
+ IIC_IRQ_NODE_SHIFT = 8,
+ IIC_IRQ_MAX = 0x1ff,
+ IIC_IRQ_TYPE_MASK = 0xc0,
+ IIC_IRQ_TYPE_NORMAL = 0x00,
+ IIC_IRQ_TYPE_IOEXC = 0x40,
+ IIC_IRQ_TYPE_IPI = 0x80,
+ IIC_IRQ_CLASS_SHIFT = 4,
+ IIC_IRQ_CLASS_0 = 0x00,
+ IIC_IRQ_CLASS_1 = 0x10,
+ IIC_IRQ_CLASS_2 = 0x20,
+ IIC_SOURCE_COUNT = 0x200,
+
+ /* Here are defined the various source/dest units. Avoid using those
+ * definitions if you can, they are mostly here for reference
+ */
+ IIC_UNIT_SPU_0 = 0x4,
+ IIC_UNIT_SPU_1 = 0x7,
+ IIC_UNIT_SPU_2 = 0x3,
+ IIC_UNIT_SPU_3 = 0x8,
+ IIC_UNIT_SPU_4 = 0x2,
+ IIC_UNIT_SPU_5 = 0x9,
+ IIC_UNIT_SPU_6 = 0x1,
+ IIC_UNIT_SPU_7 = 0xa,
+ IIC_UNIT_IOC_0 = 0x0,
+ IIC_UNIT_IOC_1 = 0xb,
+ IIC_UNIT_THREAD_0 = 0xe, /* target only */
+ IIC_UNIT_THREAD_1 = 0xf, /* target only */
+ IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */
+
+ /* Base numbers for the external interrupts */
+ IIC_IRQ_EXT_IOIF0 =
+ IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0,
+ IIC_IRQ_EXT_IOIF1 =
+ IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1,
+
+ /* Base numbers for the IIC_ISR interrupts */
+ IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63,
+ IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62,
+ IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61,
+ IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60,
+ IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59,
+
+ /* Which bits in IIC_ISR are edge sensitive */
+ IIC_ISR_EDGE_MASK = 0x4ul,
};
extern void iic_init_IRQ(void);
@@ -52,7 +80,6 @@ extern void iic_request_IPIs(void);
extern void iic_setup_cpu(void);
extern u8 iic_get_target_id(int cpu);
-extern struct irq_host *iic_get_irq_host(int node);
extern void spider_init_IRQ(void);
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 742a03282b4..608b1ebc56b 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -243,7 +243,6 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
const u32 *imap, *tmp;
int imaplen, intsize, unit;
struct device_node *iic;
- struct irq_host *iic_host;
#if 0 /* Enable that when we have a way to retreive the node as well */
/* First, we check wether we have a real "interrupts" in the device
@@ -289,11 +288,11 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
* the iic host from the iic OF node, but that way I'm still compatible
* with really really old old firmwares for which we don't have a node
*/
- iic_host = iic_get_irq_host(pic->node_id);
- if (iic_host == NULL)
- return NO_IRQ;
/* Manufacture an IIC interrupt number of class 2 */
- virq = irq_create_mapping(iic_host, 0x20 | unit);
+ virq = irq_create_mapping(NULL,
+ (pic->node_id << IIC_IRQ_NODE_SHIFT) |
+ (2 << IIC_IRQ_CLASS_SHIFT) |
+ unit);
if (virq == NO_IRQ)
printk(KERN_ERR "spider_pic: failed to map cascade !");
return virq;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 0f5c8ebc7fc..f78680346e5 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -568,24 +568,23 @@ static void spu_unmap(struct spu *spu)
/* This function shall be abstracted for HV platforms */
static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
{
- struct irq_host *host;
unsigned int isrc;
const u32 *tmp;
- host = iic_get_irq_host(spu->node);
- if (host == NULL)
- return -ENODEV;
-
- /* Get the interrupt source from the device-tree */
+ /* Get the interrupt source unit from the device-tree */
tmp = get_property(np, "isrc", NULL);
if (!tmp)
return -ENODEV;
- spu->isrc = isrc = tmp[0];
+ isrc = tmp[0];
+
+ /* Add the node number */
+ isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
+ spu->isrc = isrc;
/* Now map interrupts of all 3 classes */
- spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc);
- spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc);
- spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc);
+ spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
+ spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc);
+ spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc);
/* Right now, we only fail if class 2 failed */
return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 3eb12065df2..4aa165e010d 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -262,14 +262,6 @@ void __init iSeries_pci_final_fixup(void)
mf_display_src(0xC9000200);
}
-void pcibios_fixup_bus(struct pci_bus *PciBus)
-{
-}
-
-void pcibios_fixup_resources(struct pci_dev *pdev)
-{
-}
-
/*
* Look down the chain to find the matching Device Device
*/
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 7f1953066ff..a0ff7ba7d66 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -649,15 +649,21 @@ static void iseries_dedicated_idle(void)
void __init iSeries_init_IRQ(void) { }
#endif
+/*
+ * iSeries has no legacy IO, anything calling this function has to
+ * fail or bad things will happen
+ */
+static int iseries_check_legacy_ioport(unsigned int baseport)
+{
+ return -ENODEV;
+}
+
static int __init iseries_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "IBM,iSeries"))
return 0;
- powerpc_firmware_features |= FW_FEATURE_ISERIES;
- powerpc_firmware_features |= FW_FEATURE_LPAR;
-
hpte_init_iSeries();
return 1;
@@ -680,6 +686,7 @@ define_machine(iseries) {
.calibrate_decr = generic_calibrate_decr,
.progress = iSeries_progress,
.probe = iseries_probe,
+ .check_legacy_ioport = iseries_check_legacy_ioport,
/* XXX Implement enable_pmcs for iSeries */
};
@@ -687,6 +694,9 @@ void * __init iSeries_early_setup(void)
{
unsigned long phys_mem_size;
+ powerpc_firmware_features |= FW_FEATURE_ISERIES;
+ powerpc_firmware_features |= FW_FEATURE_LPAR;
+
iSeries_fixup_klimit();
/*
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index ce1a235855f..379db05b008 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -111,8 +111,6 @@ void udbg_scc_init(int force_scc)
pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch,
PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
-
- /* Setup for 57600 8N1 */
if (ch == ch_a)
addr += 0x20;
sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
@@ -125,9 +123,21 @@ void udbg_scc_init(int force_scc)
x = in_8(sccc);
out_8(sccc, 0x09); /* reset A or B side */
out_8(sccc, 0xc0);
+
+ /* If SCC was the OF output port, read the BRG value, else
+ * Setup for 57600 8N1
+ */
+ if (ch_def != NULL) {
+ out_8(sccc, 13);
+ scc_inittab[1] = in_8(sccc);
+ out_8(sccc, 12);
+ scc_inittab[3] = in_8(sccc);
+ }
+
for (i = 0; i < sizeof(scc_inittab); ++i)
out_8(sccc, scc_inittab[i]);
+
udbg_putc = udbg_scc_putc;
udbg_getc = udbg_scc_getc;
udbg_getc_poll = udbg_scc_getc_poll;
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 43dbf737698..f82b13e531a 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -180,7 +180,7 @@ static void __init pseries_mpic_init_IRQ(void)
cascade_irq = irq_of_parse_and_map(cascade, 0);
if (cascade == NO_IRQ) {
- printk(KERN_ERR "xics: failed to map cascade interrupt");
+ printk(KERN_ERR "mpic: failed to map cascade interrupt");
return;
}
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index f15f4d78aee..91f052d8cce 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
+obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 51752990f7b..28b01899474 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -147,7 +147,7 @@ static struct irq_chip cpm2_pic = {
.end = cpm2_end_irq,
};
-int cpm2_get_irq(struct pt_regs *regs)
+unsigned int cpm2_get_irq(struct pt_regs *regs)
{
int irq;
unsigned long bits;
diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h
index d63e45d4df5..3c513e5a688 100644
--- a/arch/powerpc/sysdev/cpm2_pic.h
+++ b/arch/powerpc/sysdev/cpm2_pic.h
@@ -3,7 +3,7 @@
extern intctl_cpm2_t *cpm2_intctl;
-extern int cpm2_get_irq(struct pt_regs *regs);
+extern unsigned int cpm2_get_irq(struct pt_regs *regs);
extern void cpm2_pic_init(struct device_node*);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 022ed275ea6..7d759f1c26b 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -37,6 +37,7 @@
#include <asm/cpm2.h>
extern void init_fcc_ioports(struct fs_platform_info*);
+extern void init_scc_ioports(struct fs_uart_platform_info*);
static phys_addr_t immrbase = -1;
phys_addr_t get_immrbase(void)
@@ -566,7 +567,7 @@ static int __init fs_enet_of_init(void)
struct resource r[4];
struct device_node *phy, *mdio;
struct fs_platform_info fs_enet_data;
- const unsigned int *id, *phy_addr;
+ const unsigned int *id, *phy_addr, phy_irq;
const void *mac_addr;
const phandle *ph;
const char *model;
@@ -588,6 +589,7 @@ static int __init fs_enet_of_init(void)
if (ret)
goto err;
r[2].name = fcc_regs_c;
+ fs_enet_data.fcc_regs_c = r[2].start;
r[3].start = r[3].end = irq_of_parse_and_map(np, 0);
r[3].flags = IORESOURCE_IRQ;
@@ -620,6 +622,8 @@ static int __init fs_enet_of_init(void)
phy_addr = get_property(phy, "reg", NULL);
fs_enet_data.phy_addr = *phy_addr;
+ phy_irq = get_property(phy, "interrupts", NULL);
+
id = get_property(np, "device-id", NULL);
fs_enet_data.fs_no = *id;
strcpy(fs_enet_data.fs_type, model);
@@ -637,6 +641,7 @@ static int __init fs_enet_of_init(void)
if (strstr(model, "FCC")) {
int fcc_index = *id - 1;
+ unsigned char* mdio_bb_prop;
fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
fs_enet_data.rx_ring = 32;
@@ -652,14 +657,57 @@ static int __init fs_enet_of_init(void)
(u32)res.start, fs_enet_data.phy_addr);
fs_enet_data.bus_id = (char*)&bus_id[(*id)];
fs_enet_data.init_ioports = init_fcc_ioports;
- }
- of_node_put(phy);
- of_node_put(mdio);
+ mdio_bb_prop = get_property(phy, "bitbang", NULL);
+ if (mdio_bb_prop) {
+ struct platform_device *fs_enet_mdio_bb_dev;
+ struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
+
+ fs_enet_mdio_bb_dev =
+ platform_device_register_simple("fsl-bb-mdio",
+ i, NULL, 0);
+ memset(&fs_enet_mdio_bb_data, 0,
+ sizeof(struct fs_mii_bb_platform_info));
+ fs_enet_mdio_bb_data.mdio_dat.bit =
+ mdio_bb_prop[0];
+ fs_enet_mdio_bb_data.mdio_dir.bit =
+ mdio_bb_prop[1];
+ fs_enet_mdio_bb_data.mdc_dat.bit =
+ mdio_bb_prop[2];
+ fs_enet_mdio_bb_data.mdio_port =
+ mdio_bb_prop[3];
+ fs_enet_mdio_bb_data.mdc_port =
+ mdio_bb_prop[4];
+ fs_enet_mdio_bb_data.delay =
+ mdio_bb_prop[5];
+
+ fs_enet_mdio_bb_data.irq[0] = phy_irq[0];
+ fs_enet_mdio_bb_data.irq[1] = -1;
+ fs_enet_mdio_bb_data.irq[2] = -1;
+ fs_enet_mdio_bb_data.irq[3] = phy_irq[0];
+ fs_enet_mdio_bb_data.irq[31] = -1;
+
+ fs_enet_mdio_bb_data.mdio_dat.offset =
+ (u32)&cpm2_immr->im_ioport.iop_pdatc;
+ fs_enet_mdio_bb_data.mdio_dir.offset =
+ (u32)&cpm2_immr->im_ioport.iop_pdirc;
+ fs_enet_mdio_bb_data.mdc_dat.offset =
+ (u32)&cpm2_immr->im_ioport.iop_pdatc;
+
+ ret = platform_device_add_data(
+ fs_enet_mdio_bb_dev,
+ &fs_enet_mdio_bb_data,
+ sizeof(struct fs_mii_bb_platform_info));
+ if (ret)
+ goto unreg;
+ }
+
+ of_node_put(phy);
+ of_node_put(mdio);
- ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
- sizeof(struct
- fs_platform_info));
+ ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
+ sizeof(struct
+ fs_platform_info));
if (ret)
goto unreg;
}
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
new file mode 100644
index 00000000000..a725e80befa
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -0,0 +1,30 @@
+#
+# QE Communication options
+#
+
+menu "QE Options"
+ depends on QUICC_ENGINE
+
+config UCC_SLOW
+ bool "UCC Slow Protocols Support"
+ default n
+ select UCC
+ help
+ This option provides qe_lib support to UCC slow
+ protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+ bool "UCC Fast Protocols Support"
+ default n
+ select UCC
+ select UCC_SLOW
+ help
+ This option provides qe_lib support to UCC fast
+ protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+ bool
+ default y if UCC_FAST || UCC_SLOW
+
+endmenu
+
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
new file mode 100644
index 00000000000..874fe1a5b1c
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
+
+obj-$(CONFIG_UCC) += ucc.o
+obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
+obj-$(CONFIG_UCC_FAST) += ucc_fast.o
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
new file mode 100644
index 00000000000..2bae632d3ad
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static void qe_muram_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+ QE_SNUM_STATE_USED,
+ QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+ u8 num;
+ enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap *qe_immr = NULL;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+ struct device_node *qe;
+
+ if (qebase != -1)
+ return qebase;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ const void *prop = get_property(qe, "reg", &size);
+ qebase = of_translate_address(qe, prop);
+ of_node_put(qe);
+ };
+
+ return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+ if (qe_immr == NULL)
+ qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+ qe_snums_init();
+
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ /* Reclaim the MURAM memory for our use. */
+ qe_muram_init();
+
+ if (qe_sdma_init())
+ panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+ unsigned long flags;
+ u8 mcn_shift = 0, dev_shift = 0;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ } else {
+ if (cmd == QE_ASSIGN_PAGE) {
+ /* Here device is the SNUM, not sub-block */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ } else if (cmd == QE_ASSIGN_RISC) {
+ /* Here device is the SNUM, and mcnProtocol is
+ * e_QeCmdRiscAssignment value */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+ } else {
+ if (device == QE_CR_SUBBLOCK_USB)
+ mcn_shift = QE_CR_MCN_USB_SHIFT;
+ else
+ mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+ }
+
+ out_be32(&qe_immr->cp.cecdr,
+ immrbar_virt_to_phys((void *)cmd_input));
+ out_be32(&qe_immr->cp.cecr,
+ (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+ mcn_protocol << mcn_shift));
+ }
+
+ /* wait for the QE_CR_FLG to clear */
+ while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
+ cpu_relax();
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int get_brg_clk(void)
+{
+ struct device_node *qe;
+ if (brg_clk)
+ return brg_clk;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ const u32 *prop = get_property(qe, "brg-frequency", &size);
+ brg_clk = *prop;
+ of_node_put(qe);
+ };
+ return brg_clk;
+}
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void qe_setbrg(u32 brg, u32 rate)
+{
+ volatile u32 *bp;
+ u32 divisor, tempval;
+ int div16 = 0;
+
+ bp = &qe_immr->brg.brgc1;
+ bp += brg;
+
+ divisor = (get_brg_clk() / rate);
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = 1;
+ divisor /= 16;
+ }
+
+ tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+ if (div16)
+ tempval |= QE_BRGC_DIV16;
+
+ out_be32(bp, tempval);
+}
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+ int i;
+ static const u8 snum_init[] = {
+ 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+ 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+ 0xD8, 0xD9, 0xE8, 0xE9,
+ };
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ snums[i].num = snum_init[i];
+ snums[i].state = QE_SNUM_STATE_FREE;
+ }
+}
+
+int qe_get_snum(void)
+{
+ unsigned long flags;
+ int snum = -EBUSY;
+ int i;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+ struct sdma *sdma = &qe_immr->sdma;
+ u32 sdma_buf_offset;
+
+ if (!sdma)
+ return -ENODEV;
+
+ /* allocate 2 internal temporary buffers (512 bytes size each) for
+ * the SDMA */
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+ if (IS_MURAM_ERR(sdma_buf_offset))
+ return -ENOMEM;
+
+ out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
+ QE_SDMR_CEN_SHIFT)));
+
+ return 0;
+}
+
+/*
+ * muram_alloc / muram_free bits.
+ */
+static DEFINE_SPINLOCK(qe_muram_lock);
+
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+
+static void qe_muram_init(void)
+{
+ struct device_node *np;
+ u32 address;
+ u64 size;
+ unsigned int flags;
+
+ /* initialize the info header */
+ rh_init(&qe_muram_info, 1,
+ sizeof(qe_boot_muram_rh_block) /
+ sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
+
+ /* Attach the usable muram area */
+ /* XXX: This is a subset of the available muram. It
+ * varies with the processor and the microcode patches activated.
+ */
+ if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+ address = *of_get_address(np, 0, &size, &flags);
+ of_node_put(np);
+ rh_attach_region(&qe_muram_info,
+ (void *)address, (int)size);
+ }
+}
+
+/* This function returns an index into the MURAM area.
+ */
+u32 qe_muram_alloc(u32 size, u32 align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start = rh_alloc_align(&qe_muram_info, size, align, "QE");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc);
+
+int qe_muram_free(u32 offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ ret = rh_free(&qe_muram_info, (void *)offset);
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(qe_muram_free);
+
+/* not sure if this is ever needed */
+u32 qe_muram_alloc_fixed(u32 offset, u32 size)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+void qe_muram_dump(void)
+{
+ rh_dump(&qe_muram_info);
+}
+EXPORT_SYMBOL(qe_muram_dump);
+
+void *qe_muram_addr(u32 offset)
+{
+ return (void *)&qe_immr->muram[offset];
+}
+EXPORT_SYMBOL(qe_muram_addr);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
new file mode 100644
index 00000000000..c229d07d495
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -0,0 +1,555 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+ [1] = {
+ .mask = 0x00008000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [2] = {
+ .mask = 0x00004000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [3] = {
+ .mask = 0x00002000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [10] = {
+ .mask = 0x00000040,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [11] = {
+ .mask = 0x00000020,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [12] = {
+ .mask = 0x00000010,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [13] = {
+ .mask = 0x00000008,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [14] = {
+ .mask = 0x00000004,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 5,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [15] = {
+ .mask = 0x00000002,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 6,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [20] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTA,
+ },
+ [25] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [26] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [27] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [28] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [32] = {
+ .mask = 0x80000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [33] = {
+ .mask = 0x40000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [34] = {
+ .mask = 0x20000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [35] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [36] = {
+ .mask = 0x08000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [40] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [41] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [42] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [43] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPYCC,
+ },
+};
+
+static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
+ u32 value)
+{
+ out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+ return irq_desc[virq].chip_data;
+}
+
+#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
+static void qe_ic_unmask_irq(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp | qe_ic_info[src].mask);
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq_and_ack(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ /* There is nothing to do for ack here, ack is handled in ISR */
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+ .typename = " QEIC ",
+ .unmask = qe_ic_unmask_irq,
+ .mask = qe_ic_mask_irq,
+ .mask_ack = qe_ic_mask_irq_and_ack,
+};
+
+static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct qe_ic *qe_ic = h->host_data;
+
+ /* Exact match, unless qe_ic node is NULL */
+ return qe_ic->of_node == NULL || qe_ic->of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct qe_ic *qe_ic = h->host_data;
+ struct irq_chip *chip;
+
+ if (qe_ic_info[hw].mask == 0) {
+ printk(KERN_ERR "Can't map reserved IRQ \n");
+ return -EINVAL;
+ }
+ /* Default chip */
+ chip = &qe_ic->hc_irq;
+
+ set_irq_chip_data(virq, qe_ic);
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+
+ set_irq_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 * intspec, unsigned int intsize,
+ irq_hw_number_t * out_hwirq,
+ unsigned int *out_flags)
+{
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_flags = intspec[1];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static struct irq_host_ops qe_ic_host_ops = {
+ .match = qe_ic_host_match,
+ .map = qe_ic_host_map,
+ .xlate = qe_ic_host_xlate,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* FIXME: We mask all the QE Low interrupts while handling. We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct qe_ic *qe_ic = desc->handler_data;
+ struct irq_chip *chip = irq_desc[irq].chip;
+
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs);
+
+ chip->mask_ack(irq);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ chip->unmask(irq);
+}
+
+/* FIXME: We mask all the QE High interrupts while handling. We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct qe_ic *qe_ic = desc->handler_data;
+ struct irq_chip *chip = irq_desc[irq].chip;
+
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs);
+
+ chip->mask_ack(irq);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ chip->unmask(irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags)
+{
+ struct qe_ic *qe_ic;
+ struct resource res;
+ u32 temp = 0, ret, high_active = 0;
+
+ qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+ if (qe_ic == NULL)
+ return;
+
+ memset(qe_ic, 0, sizeof(struct qe_ic));
+ qe_ic->of_node = node ? of_node_get(node) : NULL;
+
+ qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+ NR_QE_IC_INTS, &qe_ic_host_ops, 0);
+ if (qe_ic->irqhost == NULL) {
+ of_node_put(node);
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ return;
+
+ qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
+
+ qe_ic->irqhost->host_data = qe_ic;
+ qe_ic->hc_irq = qe_ic_irq_chip;
+
+ qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+ qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+ if (qe_ic->virq_low == NO_IRQ) {
+ printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ return;
+ }
+
+ /* default priority scheme is grouped. If spread mode is */
+ /* required, configure cicr accordingly. */
+ if (flags & QE_IC_SPREADMODE_GRP_W)
+ temp |= CICR_GWCC;
+ if (flags & QE_IC_SPREADMODE_GRP_X)
+ temp |= CICR_GXCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Y)
+ temp |= CICR_GYCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Z)
+ temp |= CICR_GZCC;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+ temp |= CICR_GRTA;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+ temp |= CICR_GRTB;
+
+ /* choose destination signal for highest priority interrupt */
+ if (flags & QE_IC_HIGH_SIGNAL) {
+ temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+ high_active = 1;
+ }
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+ set_irq_data(qe_ic->virq_low, qe_ic);
+ set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low);
+
+ if (qe_ic->virq_high != NO_IRQ) {
+ set_irq_data(qe_ic->virq_high, qe_ic);
+ set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
+ }
+
+ printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp = 0;
+
+ temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+ temp &= ~CICR_HP_MASK;
+ temp |= src << CICR_HP_SHIFT;
+
+ temp &= ~CICR_HPIT_MASK;
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp;
+
+ if (priority > 8 || priority == 0)
+ return -EINVAL;
+ if (src > 127)
+ return -EINVAL;
+ if (qe_ic_info[src].pri_reg == 0)
+ return -EINVAL;
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+ if (priority < 4) {
+ temp &= ~(0x7 << (32 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+ } else {
+ temp &= ~(0x7 << (24 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ }
+
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+ return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+ if (priority > 2 || priority == 0)
+ return -EINVAL;
+
+ switch (qe_ic_info[src].pri_reg) {
+ case QEIC_CIPZCC:
+ shift = CICNR_ZCC1T_SHIFT;
+ break;
+ case QEIC_CIPWCC:
+ shift = CICNR_WCC1T_SHIFT;
+ break;
+ case QEIC_CIPYCC:
+ shift = CICNR_YCC1T_SHIFT;
+ break;
+ case QEIC_CIPXCC:
+ shift = CICNR_XCC1T_SHIFT;
+ break;
+ case QEIC_CIPRTA:
+ shift = CRICR_RTA1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ case QEIC_CIPRTB:
+ shift = CRICR_RTB1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift += (2 - priority) * 2;
+ temp = qe_ic_read(qe_ic->regs, control_reg);
+ temp &= ~(SIGNAL_MASK << shift);
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+ qe_ic_write(qe_ic->regs, control_reg, temp);
+
+ return 0;
+}
+
+static struct sysdev_class qe_ic_sysclass = {
+ set_kset_name("qe_ic"),
+};
+
+static struct sys_device device_qe_ic = {
+ .id = 0,
+ .cls = &qe_ic_sysclass,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+ int rc;
+
+ printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+ rc = sysdev_class_register(&qe_ic_sysclass);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys class\n");
+ return -ENODEV;
+ }
+ rc = sysdev_register(&device_qe_ic);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys device\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
new file mode 100644
index 00000000000..9a631adb189
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h
@@ -0,0 +1,106 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.h
+ *
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _POWERPC_SYSDEV_QE_IC_H
+#define _POWERPC_SYSDEV_QE_IC_H
+
+#include <asm/qe_ic.h>
+
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
+
+struct qe_ic {
+ /* Control registers offset */
+ volatile u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_host *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* The device node of the interrupt controller */
+ struct device_node *of_node;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ u32 mask; /* location of this source at the QIMR register. */
+ u32 mask_reg; /* Mask register offset */
+ u8 pri_code; /* for grouped interrupts sources - the interrupt
+ code as appears at the group priority register */
+ u32 pri_reg; /* Group priority register offset */
+};
+
+#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
new file mode 100644
index 00000000000..aea43597038
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -0,0 +1,226 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+#define NUM_OF_PINS 32
+
+struct port_regs {
+ __be32 cpodr; /* Open drain register */
+ __be32 cpdata; /* Data register */
+ __be32 cpdir1; /* Direction register */
+ __be32 cpdir2; /* Direction register */
+ __be32 cppar1; /* Pin assignment register */
+ __be32 cppar2; /* Pin assignment register */
+};
+
+static struct port_regs *par_io = NULL;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+ struct resource res;
+ int ret;
+ const u32 *num_ports;
+
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ return ret;
+ par_io = ioremap(res.start, res.end - res.start + 1);
+
+ num_ports = get_property(np, "num-ports", NULL);
+ if (num_ports)
+ num_par_io_ports = *num_ports;
+
+ return 0;
+}
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
+{
+ u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
+
+ if (!par_io)
+ return -1;
+
+ /* calculate pin location for single and 2 bits information */
+ pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+
+ /* Set open drain, if required */
+ tmp_val = in_be32(&par_io[port].cpodr);
+ if (open_drain)
+ out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+ else
+ out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+
+ /* define direction */
+ tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+ in_be32(&par_io[port].cpdir2) :
+ in_be32(&par_io[port].cpdir1);
+
+ /* get all bits mask for 2 bit per port */
+ pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+ /* Get the final mask we need for the right definition */
+ new_mask2bits = (u32) (dir << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+ /* clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS / 2) - 1) {
+ out_be32(&par_io[port].cpdir2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io[port].cpdir1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+ }
+ /* define pin assignment */
+ tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+ in_be32(&par_io[port].cppar2) :
+ in_be32(&par_io[port].cppar1);
+
+ new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+ /* clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS / 2) - 1) {
+ out_be32(&par_io[port].cppar2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io[port].cppar1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+ u32 pin_mask, tmp_val;
+
+ if (port >= num_par_io_ports)
+ return -EINVAL;
+ if (pin >= NUM_OF_PINS)
+ return -EINVAL;
+ /* calculate pin location */
+ pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+
+ tmp_val = in_be32(&par_io[port].cpdata);
+
+ if (val == 0) /* clear */
+ out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+ else /* set */
+ out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+ return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+ struct device_node *pio;
+ const phandle *ph;
+ int pio_map_len;
+ const unsigned int *pio_map;
+
+ if (par_io == NULL) {
+ printk(KERN_ERR "par_io not initialized \n");
+ return -1;
+ }
+
+ ph = get_property(np, "pio-handle", NULL);
+ if (ph == 0) {
+ printk(KERN_ERR "pio-handle not available \n");
+ return -1;
+ }
+
+ pio = of_find_node_by_phandle(*ph);
+
+ pio_map = get_property(pio, "pio-map", &pio_map_len);
+ if (pio_map == NULL) {
+ printk(KERN_ERR "pio-map is not set! \n");
+ return -1;
+ }
+ pio_map_len /= sizeof(unsigned int);
+ if ((pio_map_len % 6) != 0) {
+ printk(KERN_ERR "pio-map format wrong! \n");
+ return -1;
+ }
+
+ while (pio_map_len > 0) {
+ par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+ (int) pio_map[2], (int) pio_map[3],
+ (int) pio_map[4], (int) pio_map[5]);
+ pio_map += 6;
+ pio_map_len -= 6;
+ }
+ of_node_put(pio);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
+
+#ifdef DEBUG
+static void dump_par_io(void)
+{
+ int i;
+
+ printk(KERN_INFO "PAR IO registars:\n");
+ printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+ for (i = 0; i < num_par_io_ports; i++) {
+ printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpodr,
+ in_be32(&par_io[i].cpodr));
+ printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpdata,
+ in_be32(&par_io[i].cpdata));
+ printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpdir1,
+ in_be32(&par_io[i].cpdir1));
+ printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpdir2,
+ in_be32(&par_io[i].cpdir2));
+ printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cppar1,
+ in_be32(&par_io[i].cppar1));
+ printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cppar2,
+ in_be32(&par_io[i].cppar2));
+ }
+
+}
+EXPORT_SYMBOL(dump_par_io);
+#endif /* DEBUG */
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
new file mode 100644
index 00000000000..916c9e5df57
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -0,0 +1,251 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc.c
+ *
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/ucc.h>
+
+static DEFINE_SPINLOCK(ucc_lock);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucc_lock, flags);
+ out_be32(&qe_immr->qmx.cmxgcr,
+ ((in_be32(&qe_immr->qmx.cmxgcr) &
+ ~QE_CMXGCR_MII_ENET_MNG) |
+ (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+ spin_unlock_irqrestore(&ucc_lock, flags);
+
+ return 0;
+}
+
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed)
+{
+ u8 guemr = 0;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ guemr = regs->guemr;
+ guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
+ switch (speed) {
+ case UCC_SPEED_TYPE_SLOW:
+ guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
+ break;
+ case UCC_SPEED_TYPE_FAST:
+ guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
+ break;
+ default:
+ return -EINVAL;
+ }
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+int ucc_init_guemr(struct ucc_common *regs)
+{
+ u8 guemr = 0;
+
+ if (!regs)
+ return -EINVAL;
+
+ /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
+ guemr = UCC_GUEMR_SET_RESERVED3;
+
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
+ u8 * shift)
+{
+ switch (ucc_num) {
+ case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 16;
+ break;
+ case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 0;
+ break;
+ case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 16;
+ break;
+ case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 0;
+ break;
+ case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 16;
+ break;
+ case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 0;
+ break;
+ case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 16;
+ break;
+ case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+
+ if (set)
+ out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+ else
+ out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+
+ return 0;
+}
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+ u32 clock_bits;
+ u32 clock_mask;
+ int source = -1;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ return -EINVAL;
+ }
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+
+ switch (reg_num) {
+ case 1:
+ switch (clock) {
+ case QE_BRG1: source = 1; break;
+ case QE_BRG2: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK9: source = 5; break;
+ case QE_CLK10: source = 6; break;
+ case QE_CLK11: source = 7; break;
+ case QE_CLK12: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 2:
+ switch (clock) {
+ case QE_BRG5: source = 1; break;
+ case QE_BRG6: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK13: source = 5; break;
+ case QE_CLK14: source = 6; break;
+ case QE_CLK19: source = 7; break;
+ case QE_CLK20: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 3:
+ switch (clock) {
+ case QE_BRG9: source = 1; break;
+ case QE_BRG10: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK3: source = 5; break;
+ case QE_CLK4: source = 6; break;
+ case QE_CLK17: source = 7; break;
+ case QE_CLK18: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 4:
+ switch (clock) {
+ case QE_BRG13: source = 1; break;
+ case QE_BRG14: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK5: source = 5; break;
+ case QE_CLK6: source = 6; break;
+ case QE_CLK21: source = 7; break;
+ case QE_CLK22: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ default:
+ source = -1;
+ break;
+ }
+
+ if (source == -1) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ return -ENOENT;
+ }
+
+ clock_bits = (u32) source;
+ clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
+ if (mode == COMM_DIR_RX) {
+ clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */
+ clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */
+ }
+ clock_bits <<= shift;
+ clock_mask <<= shift;
+
+ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
new file mode 100644
index 00000000000..c2be7348fcb
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -0,0 +1,396 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc_fast.c
+ *
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_fast.h>
+
+#define uccf_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccf_dbg(format, arg...) \
+ uccf_printk(KERN_DEBUG , format , ## arg)
+#define uccf_err(format, arg...) \
+ uccf_printk(KERN_ERR , format , ## arg)
+#define uccf_info(format, arg...) \
+ uccf_printk(KERN_INFO , format , ## arg)
+#define uccf_warn(format, arg...) \
+ uccf_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCF_VERBOSE_DEBUG
+#define uccf_vdbg uccf_dbg
+#else
+#define uccf_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCF_VERBOSE_DEBUG */
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
+{
+ uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
+ uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+
+ uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+ uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfset,
+ in_be16(&uccf->uf_regs->urfset));
+ uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+ switch (uccf_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+ case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+ case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+ case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+ case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+ case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
+{
+ struct ucc_fast_private *uccf;
+ struct ucc_fast *uf_regs;
+ u32 gumr = 0;
+ int ret;
+
+ uccf_vdbg("%s: IN", __FUNCTION__);
+
+ if (!uf_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccf_err("ucc_fast_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /* Check that 'max_rx_buf_length' is properly aligned (4). */
+ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ /* Validate Virtual Fifo register values */
+ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs too small.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+ return -EINVAL;
+ }
+
+ uccf = (struct ucc_fast_private *)
+ kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+ if (!uccf) {
+ uccf_err
+ ("ucc_fast_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccf, 0, sizeof(struct ucc_fast_private));
+
+ /* Fill fast UCC structure */
+ uccf->uf_info = uf_info;
+ /* Set the PHY base address */
+ uccf->uf_regs =
+ (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ if (uccf->uf_regs == NULL) {
+ uccf_err
+ ("ucc_fast_init: No memory map for UCC slow controller!");
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+ uccf->stopped_tx = 0;
+ uccf->stopped_rx = 0;
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = (u32 *) & (uf_regs->ucce);
+ uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef STATISTICS
+ uccf->tx_frames = 0;
+ uccf->rx_frames = 0;
+ uccf->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
+ uccf_err("ucc_fast_init: Could not init the guemr register.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ /* Set UCC to fast type */
+ if ((ret = ucc_set_type(uf_info->ucc_num,
+ (struct ucc_common *) (uf_regs),
+ UCC_SPEED_TYPE_FAST))) {
+ uccf_err("ucc_fast_init: Could not set type to fast.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ uccf->mrblr = uf_info->max_rx_buf_length;
+
+ /* Set GUMR */
+ /* For more details see the hardware spec. */
+ /* gumr starts as zero. */
+ if (uf_info->tci)
+ gumr |= UCC_FAST_GUMR_TCI;
+ gumr |= uf_info->ttx_trx;
+ if (uf_info->cdp)
+ gumr |= UCC_FAST_GUMR_CDP;
+ if (uf_info->ctsp)
+ gumr |= UCC_FAST_GUMR_CTSP;
+ if (uf_info->cds)
+ gumr |= UCC_FAST_GUMR_CDS;
+ if (uf_info->ctss)
+ gumr |= UCC_FAST_GUMR_CTSS;
+ if (uf_info->txsy)
+ gumr |= UCC_FAST_GUMR_TXSY;
+ if (uf_info->rsyn)
+ gumr |= UCC_FAST_GUMR_RSYN;
+ gumr |= uf_info->synl;
+ if (uf_info->rtsm)
+ gumr |= UCC_FAST_GUMR_RTSM;
+ gumr |= uf_info->renc;
+ if (uf_info->revd)
+ gumr |= UCC_FAST_GUMR_REVD;
+ gumr |= uf_info->tenc;
+ gumr |= uf_info->tcrc;
+ gumr |= uf_info->mode;
+ out_be32(&uf_regs->gumr, gumr);
+
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "struct ucc_fastx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->urfs +
+ (u32)
+ UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "ucc_fast_rx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, uf_info->urfs);
+ out_be16(&uf_regs->urfet, uf_info->urfet);
+ out_be16(&uf_regs->urfset, uf_info->urfset);
+ out_be16(&uf_regs->utfs, uf_info->utfs);
+ out_be16(&uf_regs->utfet, uf_info->utfet);
+ out_be16(&uf_regs->utftt, uf_info->utftt);
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!uf_info->tsa) {
+ /* Rx clock routing */
+ if (uf_info->rx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'RxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ /* Tx clock routing */
+ if (uf_info->tx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'TxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ }
+
+ /* Set interrupt mask register at UCC level. */
+ out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened
+ * Writing '1' clears
+ */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+
+void ucc_fast_free(struct ucc_fast_private * uccf)
+{
+ if (!uccf)
+ return;
+
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ kfree(uccf);
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
new file mode 100644
index 00000000000..1fb88ef7cf0
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_slow.h>
+
+#define uccs_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccs_dbg(format, arg...) \
+ uccs_printk(KERN_DEBUG , format , ## arg)
+#define uccs_err(format, arg...) \
+ uccs_printk(KERN_ERR , format , ## arg)
+#define uccs_info(format, arg...) \
+ uccs_printk(KERN_INFO , format , ## arg)
+#define uccs_warn(format, arg...) \
+ uccs_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCS_VERBOSE_DEBUG
+#define uccs_vdbg uccs_dbg
+#else
+#define uccs_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCS_VERBOSE_DEBUG */
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+ switch (uccs_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
+ case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
+ case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
+ case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
+ case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
+ case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
+ case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
+ case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
+{
+ out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
+}
+
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 1;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 0;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
+{
+ u32 i;
+ struct ucc_slow *us_regs;
+ u32 gumr;
+ u8 function_code = 0;
+ u8 *bd;
+ struct ucc_slow_private *uccs;
+ u32 id;
+ u32 command;
+ int ret;
+
+ uccs_vdbg("%s: IN", __FUNCTION__);
+
+ if (!us_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccs_err("ucc_slow_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /*
+ * Set mrblr
+ * Check that 'max_rx_buf_length' is properly aligned (4), unless
+ * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ * case when QE accepts 32 bits at a time.
+ */
+ if ((!us_info->rfw) &&
+ (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+ uccs_err("max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ uccs = (struct ucc_slow_private *)
+ kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+ if (!uccs) {
+ uccs_err
+ ("ucc_slow_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccs, 0, sizeof(struct ucc_slow_private));
+
+ /* Fill slow UCC structure */
+ uccs->us_info = us_info;
+ uccs->saved_uccm = 0;
+ uccs->p_rx_frame = 0;
+ uccs->us_regs = us_info->us_regs;
+ us_regs = uccs->us_regs;
+ uccs->p_ucce = (u16 *) & (us_regs->ucce);
+ uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+ uccs->rx_frames = 0;
+ uccs->tx_frames = 0;
+ uccs->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Get PRAM base */
+ uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
+ ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_MURAM_ERR(uccs->us_pram_offset)) {
+ uccs_err
+ ("ucc_slow_init: Can not allocate MURAM memory "
+ "for Slow UCC.");
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+ (u32) uccs->us_pram_offset);
+
+ uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ /* Set UCC to slow type */
+ if ((ret = ucc_set_type(us_info->ucc_num,
+ (struct ucc_common *) (us_info->us_regs),
+ UCC_SPEED_TYPE_SLOW))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+ INIT_LIST_HEAD(&uccs->confQ);
+
+ /* Allocate BDs. */
+ uccs->rx_base_offset =
+ qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->rx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Rx BD's.");
+ uccs->rx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->tx_base_offset =
+ qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->tx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Tx BD's.");
+ uccs->tx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ /* Init Tx bds */
+ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+ for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+ /* clear bd buffer */
+ out_be32(&(((struct qe_bd *)bd)->buf), 0);
+ /* set bd status and length */
+ out_be32((u32*)bd, 0);
+ bd += sizeof(struct qe_bd);
+ }
+ bd -= sizeof(struct qe_bd);
+ /* set bd status and length */
+ out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */
+
+ /* Init Rx bds */
+ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+ for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+ /* set bd status and length */
+ out_be32((u32*)bd, 0);
+ /* clear bd buffer */
+ out_be32(&(((struct qe_bd *)bd)->buf), 0);
+ bd += sizeof(struct qe_bd);
+ }
+ bd -= sizeof(struct qe_bd);
+ /* set bd status and length */
+ out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */
+
+ /* Set GUMR (For more details see the hardware spec.). */
+ /* gumr_h */
+ gumr = 0;
+ gumr |= us_info->tcrc;
+ if (us_info->cdp)
+ gumr |= UCC_SLOW_GUMR_H_CDP;
+ if (us_info->ctsp)
+ gumr |= UCC_SLOW_GUMR_H_CTSP;
+ if (us_info->cds)
+ gumr |= UCC_SLOW_GUMR_H_CDS;
+ if (us_info->ctss)
+ gumr |= UCC_SLOW_GUMR_H_CTSS;
+ if (us_info->tfl)
+ gumr |= UCC_SLOW_GUMR_H_TFL;
+ if (us_info->rfw)
+ gumr |= UCC_SLOW_GUMR_H_RFW;
+ if (us_info->txsy)
+ gumr |= UCC_SLOW_GUMR_H_TXSY;
+ if (us_info->rtsm)
+ gumr |= UCC_SLOW_GUMR_H_RTSM;
+ out_be32(&us_regs->gumr_h, gumr);
+
+ /* gumr_l */
+ gumr = 0;
+ if (us_info->tci)
+ gumr |= UCC_SLOW_GUMR_L_TCI;
+ if (us_info->rinv)
+ gumr |= UCC_SLOW_GUMR_L_RINV;
+ if (us_info->tinv)
+ gumr |= UCC_SLOW_GUMR_L_TINV;
+ if (us_info->tend)
+ gumr |= UCC_SLOW_GUMR_L_TEND;
+ gumr |= us_info->tdcr;
+ gumr |= us_info->rdcr;
+ gumr |= us_info->tenc;
+ gumr |= us_info->renc;
+ gumr |= us_info->diag;
+ gumr |= us_info->mode;
+ out_be32(&us_regs->gumr_l, gumr);
+
+ /* Function code registers */
+ /* function_code has initial value 0 */
+
+ /* if the data is in cachable memory, the 'global' */
+ /* in the function code should be set. */
+ function_code |= us_info->data_mem_part;
+ function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
+ uccs->us_pram->tfcr = function_code;
+ uccs->us_pram->rfcr = function_code;
+
+ /* rbase, tbase are offsets from MURAM base */
+ out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!us_info->tsa) {
+ /* Rx clock routing */
+ if (ucc_set_qe_mux_rxtx
+ (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter"
+ " 'RxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
+ us_info->tx_clock, COMM_DIR_TX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter "
+ "'TxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * INTERRUPTS
+ */
+ /* Set interrupt mask register at UCC level. */
+ out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level, */
+ /* otherwise, old garbage may come through */
+ /* as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be16(&us_regs->ucce, 0xffff);
+
+ /* Issue QE Init command */
+ if (us_info->init_tx && us_info->init_rx)
+ command = QE_INIT_TX_RX;
+ else if (us_info->init_tx)
+ command = QE_INIT_TX;
+ else
+ command = QE_INIT_RX; /* We know at least one is TRUE */
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ *uccs_ret = uccs;
+ return 0;
+}
+
+void ucc_slow_free(struct ucc_slow_private * uccs)
+{
+ if (!uccs)
+ return;
+
+ if (uccs->rx_base_offset)
+ qe_muram_free(uccs->rx_base_offset);
+
+ if (uccs->tx_base_offset)
+ qe_muram_free(uccs->tx_base_offset);
+
+ if (uccs->us_pram) {
+ qe_muram_free(uccs->us_pram_offset);
+ uccs->us_pram = NULL;
+ }
+
+ kfree(uccs);
+}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 8adad1444a5..708236f3474 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2,6 +2,8 @@
* Routines providing a simple monitor for use on the PowerMac.
*
* Copyright (C) 1996-2005 Paul Mackerras.
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ * Copyrignt (C) 2006 Michael Ellerman, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -503,7 +505,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
mtmsr(msr); /* restore interrupt enable */
- return cmd != 'X';
+ return cmd != 'X' && cmd != EOF;
}
int xmon(struct pt_regs *excp)
@@ -2597,3 +2599,34 @@ static int __init setup_xmon_sysrq(void)
}
__initcall(setup_xmon_sysrq);
#endif /* CONFIG_MAGIC_SYSRQ */
+
+int __initdata xmon_early, xmon_off;
+
+static int __init early_parse_xmon(char *p)
+{
+ if (!p || strncmp(p, "early", 5) == 0) {
+ /* just "xmon" is equivalent to "xmon=early" */
+ xmon_init(1);
+ xmon_early = 1;
+ } else if (strncmp(p, "on", 2) == 0)
+ xmon_init(1);
+ else if (strncmp(p, "off", 3) == 0)
+ xmon_off = 1;
+ else if (strncmp(p, "nobt", 4) == 0)
+ xmon_no_auto_backtrace = 1;
+ else
+ return 1;
+
+ return 0;
+}
+early_param("xmon", early_parse_xmon);
+
+void __init xmon_setup(void)
+{
+#ifdef CONFIG_XMON_DEFAULT
+ if (!xmon_off)
+ xmon_init(1);
+#endif
+ if (xmon_early)
+ debugger(NULL);
+}
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index f2305ee792a..fdc8f892eb8 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -636,7 +636,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
intr = in_8(&sw->intr);
err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
if ((intr & ERROR_INTR) && fs->state != do_transfer)
- printk(KERN_ERR "swim3_interrupt, state=%d, dir=%lx, intr=%x, err=%x\n",
+ printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(fd_req), intr, err);
switch (fs->state) {
case locating:
@@ -742,7 +742,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
if ((stat & ACTIVE) == 0 || resid != 0) {
/* musta been an error */
printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
- printk(KERN_ERR " state=%d, dir=%lx, intr=%x, err=%x\n",
+ printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(fd_req), intr, err);
end_request(fd_req, 0);
fs->state = idle;
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index 8b6f197e5f8..f144a947bd1 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -29,6 +29,7 @@
#include <asm/hvconsole.h>
#include <asm/vio.h>
#include <asm/prom.h>
+#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_call.h>
#include <asm/iseries/hv_lp_config.h>
@@ -488,6 +489,9 @@ static int hvc_vio_init(void)
atomic_t wait_flag;
int rc;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return -EIO;
+
/* +2 for fudge */
rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
@@ -562,7 +566,7 @@ static int hvc_find_vtys(void)
for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL;
vty = of_find_node_by_name(vty, "vty")) {
- uint32_t *vtermno;
+ const uint32_t *vtermno;
/* We have statically defined space for only a certain number
* of console adapters.
@@ -571,7 +575,7 @@ static int hvc_find_vtys(void)
(num_found >= VTTY_PORTS))
break;
- vtermno = (uint32_t *)get_property(vty, "reg", NULL);
+ vtermno = get_property(vty, "reg", NULL);
if (!vtermno)
continue;
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index cc95941148f..f9c00844d2b 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -35,6 +35,7 @@
#include <asm/hvconsole.h>
#include <asm/vio.h>
#include <asm/prom.h>
+#include <asm/firmware.h>
#include "hvc_console.h"
@@ -120,6 +121,9 @@ static int hvc_vio_init(void)
{
int rc;
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return -EIO;
+
/* Register as a vio device to receive callbacks */
rc = vio_register_driver(&hvc_vio_driver);
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index 77069df92bf..1022737f4f3 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -14,34 +14,36 @@
#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#include <asm/asm-compat.h>
/* firmware feature bitmask values */
#define FIRMWARE_MAX_FEATURES 63
-#define FW_FEATURE_PFT (1UL<<0)
-#define FW_FEATURE_TCE (1UL<<1)
-#define FW_FEATURE_SPRG0 (1UL<<2)
-#define FW_FEATURE_DABR (1UL<<3)
-#define FW_FEATURE_COPY (1UL<<4)
-#define FW_FEATURE_ASR (1UL<<5)
-#define FW_FEATURE_DEBUG (1UL<<6)
-#define FW_FEATURE_TERM (1UL<<7)
-#define FW_FEATURE_PERF (1UL<<8)
-#define FW_FEATURE_DUMP (1UL<<9)
-#define FW_FEATURE_INTERRUPT (1UL<<10)
-#define FW_FEATURE_MIGRATE (1UL<<11)
-#define FW_FEATURE_PERFMON (1UL<<12)
-#define FW_FEATURE_CRQ (1UL<<13)
-#define FW_FEATURE_VIO (1UL<<14)
-#define FW_FEATURE_RDMA (1UL<<15)
-#define FW_FEATURE_LLAN (1UL<<16)
-#define FW_FEATURE_BULK (1UL<<17)
-#define FW_FEATURE_XDABR (1UL<<18)
-#define FW_FEATURE_MULTITCE (1UL<<19)
-#define FW_FEATURE_SPLPAR (1UL<<20)
-#define FW_FEATURE_ISERIES (1UL<<21)
-#define FW_FEATURE_LPAR (1UL<<22)
+#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001)
+#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002)
+#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004)
+#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008)
+#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010)
+#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020)
+#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040)
+#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080)
+#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100)
+#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200)
+#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400)
+#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800)
+#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000)
+#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000)
+#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
+#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
+#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
+#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
+#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
+#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
+#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000)
+#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
+
+#ifndef __ASSEMBLY__
enum {
#ifdef CONFIG_PPC64
@@ -94,6 +96,23 @@ extern void machine_check_fwnmi(void);
/* This is true if we are using the firmware NMI handler (typically LPAR) */
extern int fwnmi_active;
+#else /* __ASSEMBLY__ */
+
+#define BEGIN_FW_FTR_SECTION 96:
+
+#define END_FW_FTR_SECTION(msk, val) \
+97: \
+ .section __fw_ftr_fixup,"a"; \
+ .align 3; \
+ .llong msk; \
+ .llong val; \
+ .llong 96b; \
+ .llong 97b; \
+ .previous
+
+#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk))
+#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0)
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
new file mode 100644
index 00000000000..ce12f85fff9
--- /dev/null
+++ b/include/asm-powerpc/immap_qe.h
@@ -0,0 +1,477 @@
+/*
+ * include/asm-powerpc/immap_qe.h
+ *
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+ __be32 iadd; /* I-RAM Address Register */
+ __be32 idata; /* I-RAM Data Register */
+ u8 res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+ __be32 qicr;
+ __be32 qivec;
+ __be32 qripnr;
+ __be32 qipnr;
+ __be32 qipxcc;
+ __be32 qipycc;
+ __be32 qipwcc;
+ __be32 qipzcc;
+ __be32 qimr;
+ __be32 qrimr;
+ __be32 qicnr;
+ u8 res0[0x4];
+ __be32 qiprta;
+ __be32 qiprtb;
+ u8 res1[0x4];
+ __be32 qricr;
+ u8 res2[0x20];
+ __be32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+ __be32 cecr; /* QE command register */
+ __be32 ceccr; /* QE controller configuration register */
+ __be32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ __be16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ __be16 cetmr; /* QE timers mask register */
+ __be32 cetscr; /* QE time-stamp timer control register */
+ __be32 cetsr1; /* QE time-stamp register 1 */
+ __be32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ __be32 cevter; /* QE virtual tasks event register */
+ __be32 cevtmr; /* QE virtual tasks mask register */
+ __be16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ __be16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ __be16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ __be16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ __be16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ __be16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ __be16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ __be16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ __be16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+ __be32 cmxgcr; /* CMX general clock route register */
+ __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ __be32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ __be32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ __be32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ __be32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ __be32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
+ u8 res1[0xB];
+ __be16 gtmdr1; /* Timer 1 mode register */
+ __be16 gtmdr2; /* Timer 2 mode register */
+ __be16 gtrfr1; /* Timer 1 reference register */
+ __be16 gtrfr2; /* Timer 2 reference register */
+ __be16 gtcpr1; /* Timer 1 capture register */
+ __be16 gtcpr2; /* Timer 2 capture register */
+ __be16 gtcnr1; /* Timer 1 counter */
+ __be16 gtcnr2; /* Timer 2 counter */
+ __be16 gtmdr3; /* Timer 3 mode register */
+ __be16 gtmdr4; /* Timer 4 mode register */
+ __be16 gtrfr3; /* Timer 3 reference register */
+ __be16 gtrfr4; /* Timer 4 reference register */
+ __be16 gtcpr3; /* Timer 3 capture register */
+ __be16 gtcpr4; /* Timer 4 capture register */
+ __be16 gtcnr3; /* Timer 3 counter */
+ __be16 gtcnr4; /* Timer 4 counter */
+ __be16 gtevr1; /* Timer 1 event register */
+ __be16 gtevr2; /* Timer 2 event register */
+ __be16 gtevr3; /* Timer 3 event register */
+ __be16 gtevr4; /* Timer 4 event register */
+ __be16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+ __be32 brgc1; /* BRG1 configuration register */
+ __be32 brgc2; /* BRG2 configuration register */
+ __be32 brgc3; /* BRG3 configuration register */
+ __be32 brgc4; /* BRG4 configuration register */
+ __be32 brgc5; /* BRG5 configuration register */
+ __be32 brgc6; /* BRG6 configuration register */
+ __be32 brgc7; /* BRG7 configuration register */
+ __be32 brgc8; /* BRG8 configuration register */
+ __be32 brgc9; /* BRG9 configuration register */
+ __be32 brgc10; /* BRG10 configuration register */
+ __be32 brgc11; /* BRG11 configuration register */
+ __be32 brgc12; /* BRG12 configuration register */
+ __be32 brgc13; /* BRG13 configuration register */
+ __be32 brgc14; /* BRG14 configuration register */
+ __be32 brgc15; /* BRG15 configuration register */
+ __be32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+ u8 res0[0x20];
+ __be32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ __be32 spitd; /* SPI transmit data register (cpu mode) */
+ __be32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+ __be16 siamr1; /* SI1 TDMA mode register */
+ __be16 sibmr1; /* SI1 TDMB mode register */
+ __be16 sicmr1; /* SI1 TDMC mode register */
+ __be16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ __be16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ __be16 siemr1; /* SI1 TDME mode register 16 bits */
+ __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ __be32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep1;
+ __be16 usb_usep2;
+ __be16 usb_usep3;
+ __be16 usb_usep4;
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+ __be32 mcce; /* MCC event register */
+ __be32 mccm; /* MCC mask register */
+ __be32 mccf; /* MCC configuration register */
+ __be32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+ __be32 gumr_l; /* UCCx general mode register (low) */
+ __be32 gumr_h; /* UCCx general mode register (high) */
+ __be16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ __be16 utodr; /* UCCx transmit on demand register */
+ __be16 udsr; /* UCCx data synchronization register */
+ __be16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ __be16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ __be16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+ __be32 gumr; /* UCCx general mode register */
+ __be32 upsmr; /* UCCx protocol-specific mode register */
+ __be16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ __be16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ __be32 ucce; /* UCCx event register */
+ __be32 uccm; /* UCCx mask register */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ __be32 urfb; /* UCC receive FIFO base */
+ __be16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ __be16 urfet; /* UCC receive FIFO emergency threshold */
+ __be16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ __be32 utfb; /* UCC transmit FIFO base */
+ __be16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ __be16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ __be16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ __be16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ __be32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC */
+struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed));
+
+struct ucc {
+ union {
+ struct ucc_slow slow;
+ struct ucc_fast fast;
+ struct ucc_common common;
+ };
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+ __be32 upgcr; /* UTOPIA/POS general configuration register */
+ __be32 uplpa; /* UTOPIA/POS last PHY address */
+ __be32 uphec; /* ATM HEC register */
+ __be32 upuc; /* UTOPIA/POS UCC configuration */
+ __be32 updc1; /* UTOPIA/POS device 1 configuration */
+ __be32 updc2; /* UTOPIA/POS device 2 configuration */
+ __be32 updc3; /* UTOPIA/POS device 3 configuration */
+ __be32 updc4; /* UTOPIA/POS device 4 configuration */
+ __be32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ __be32 upde1; /* UTOPIA/POS device 1 event */
+ __be32 upde2; /* UTOPIA/POS device 2 event */
+ __be32 upde3; /* UTOPIA/POS device 3 event */
+ __be32 upde4; /* UTOPIA/POS device 4 event */
+ __be16 uprp1;
+ __be16 uprp2;
+ __be16 uprp3;
+ __be16 uprp4;
+ u8 res1[0x8];
+ __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ __be32 uper1; /* Device 1 port enable register */
+ __be32 uper2; /* Device 2 port enable register */
+ __be32 uper3; /* Device 3 port enable register */
+ __be32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+ __be32 sdsr; /* Serial DMA status register */
+ __be32 sdmr; /* Serial DMA mode register */
+ __be32 sdtr1; /* SDMA system bus threshold register */
+ __be32 sdtr2; /* SDMA secondary bus threshold register */
+ __be32 sdhy1; /* SDMA system bus hysteresis register */
+ __be32 sdhy2; /* SDMA secondary bus hysteresis register */
+ __be32 sdta1; /* SDMA system bus address register */
+ __be32 sdta2; /* SDMA secondary bus address register */
+ __be32 sdtm1; /* SDMA system bus MSNUM register */
+ __be32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ __be32 sdaqr; /* SDMA address bus qualify register */
+ __be32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ __be32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+ __be32 bpdcr; /* Breakpoint debug command register */
+ __be32 bpdsr; /* Breakpoint debug status register */
+ __be32 bpdmr; /* Breakpoint debug mask register */
+ __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ __be32 bprmir; /* Breakpoint request mode immediate register */
+ __be32 bprmsr; /* Breakpoint request mode serial register */
+ __be32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed));
+
+/* RISC Special Registers (Trap and Breakpoint) */
+struct rsp {
+ u8 fixme[0x100];
+} __attribute__ ((packed));
+
+struct qe_immap {
+ struct qe_iram iram; /* I-RAM */
+ struct qe_ic_regs ic; /* Interrupt Controller */
+ struct cp_qe cp; /* Communications Processor */
+ struct qe_mux qmx; /* QE Multiplexer */
+ struct qe_timers qet; /* QE Timers */
+ struct spi spi[0x2]; /* spi */
+ struct mcc mcc; /* mcc */
+ struct qe_brg brg; /* brg */
+ struct usb_ctlr usb; /* USB */
+ struct si1 si1; /* SI */
+ u8 res11[0x800];
+ struct sir sir; /* SI Routing Tables */
+ struct ucc ucc1; /* ucc1 */
+ struct ucc ucc3; /* ucc3 */
+ struct ucc ucc5; /* ucc5 */
+ struct ucc ucc7; /* ucc7 */
+ u8 res12[0x600];
+ struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
+ struct ucc ucc2; /* ucc2 */
+ struct ucc ucc4; /* ucc4 */
+ struct ucc ucc6; /* ucc6 */
+ struct ucc ucc8; /* ucc8 */
+ u8 res13[0x600];
+ struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
+ struct sdma sdma; /* SDMA */
+ struct dbg dbg; /* Debug Space */
+ struct rsp rsp[0x2]; /* RISC Special Registers
+ (Trap and Breakpoint) */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000
+ Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+{
+ if ( ((u32)address >= (u32)qe_immr) &&
+ ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+ return (unsigned long)(address - (u32)qe_immr +
+ (u32)get_qe_base());
+ return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
new file mode 100644
index 00000000000..a62168ec535
--- /dev/null
+++ b/include/asm-powerpc/qe.h
@@ -0,0 +1,457 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Export QE common operations */
+extern void qe_reset(void);
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(u32 brg, u32 rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+u32 qe_muram_alloc(u32 size, u32 align);
+int qe_muram_free(u32 offset);
+u32 qe_muram_alloc_fixed(u32 offset, u32 size);
+void qe_muram_dump(void);
+void *qe_muram_addr(u32 offset);
+
+/* Buffer descriptors */
+struct qe_bd {
+ u16 status;
+ u16 length;
+ u32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose
+ RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+};
+
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_CLK_DUMMY,
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000b
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BMR byte order */
+#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* UPC */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC */
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+ u16 rbase; /* RX BD base address */
+ u16 tbase; /* TX BD base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ u16 mrblr; /* Rx buffer length */
+ u32 rstate; /* Rx internal state */
+ u32 rptr; /* Rx internal data pointer */
+ u16 rbptr; /* rb BD Pointer */
+ u16 rcount; /* Rx internal byte count */
+ u32 rtemp; /* Rx temp */
+ u32 tstate; /* Tx internal state */
+ u32 tptr; /* Tx internal data pointer */
+ u16 tbptr; /* Tx BD pointer */
+ u16 tcount; /* Tx byte count */
+ u32 ttemp; /* Tx temp */
+ u32 rcrc; /* temp receive CRC */
+ u32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_CRC16 0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* Slow UCC Event Register (UCCE) */
+#define UCC_SLOW_UCCE_GLR 0x1000
+#define UCC_SLOW_UCCE_GLT 0x0800
+#define UCC_SLOW_UCCE_DCC 0x0400
+#define UCC_SLOW_UCCE_FLG 0x0200
+#define UCC_SLOW_UCCE_AB 0x0200
+#define UCC_SLOW_UCCE_IDLE 0x0100
+#define UCC_SLOW_UCCE_GRA 0x0080
+#define UCC_SLOW_UCCE_TXE 0x0010
+#define UCC_SLOW_UCCE_RXF 0x0008
+#define UCC_SLOW_UCCE_CCR 0x0008
+#define UCC_SLOW_UCCE_RCH 0x0008
+#define UCC_SLOW_UCCE_BSY 0x0004
+#define UCC_SLOW_UCCE_TXB 0x0002
+#define UCC_SLOW_UCCE_TX 0x0002
+#define UCC_SLOW_UCCE_RX 0x0001
+#define UCC_SLOW_UCCE_GOV 0x0001
+#define UCC_SLOW_UCCE_GUN 0x0002
+#define UCC_SLOW_UCCE_GINT 0x0004
+#define UCC_SLOW_UCCE_IQOV 0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
+ UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
+ UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
+ UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
+ UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Function code masks */
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+static inline long IS_MURAM_ERR(const u32 offset)
+{
+ return offset > (u32) - 1000L;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
new file mode 100644
index 00000000000..e386fb7e44b
--- /dev/null
+++ b/include/asm-powerpc/qe_ic.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-powerpc/qe_ic.h
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags);
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 4b41deaa8d8..43627596003 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -91,10 +91,6 @@ DEBUGGER_BOILERPLATE(debugger_iabr_match)
DEBUGGER_BOILERPLATE(debugger_dabr_match)
DEBUGGER_BOILERPLATE(debugger_fault_handler)
-#ifdef CONFIG_XMON
-extern void xmon_init(int enable);
-#endif
-
#else
static inline int debugger(struct pt_regs *regs) { return 0; }
static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
new file mode 100644
index 00000000000..afe3076bdc0
--- /dev/null
+++ b/include/asm-powerpc/ucc.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
+};
+
+/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
+*/
+enum ucc_pram_initial_offset {
+ UCC_PRAM_OFFSET_UCC1 = 0x8400,
+ UCC_PRAM_OFFSET_UCC2 = 0x8500,
+ UCC_PRAM_OFFSET_UCC3 = 0x8600,
+ UCC_PRAM_OFFSET_UCC4 = 0x9000,
+ UCC_PRAM_OFFSET_UCC5 = 0x8000,
+ UCC_PRAM_OFFSET_UCC6 = 0x8100,
+ UCC_PRAM_OFFSET_UCC7 = 0x8200,
+ UCC_PRAM_OFFSET_UCC8 = 0x8300
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * regs - (In) pointer to registers base for the UCC.
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed);
+
+/* ucc_init_guemr
+ * Init the Guemr register.
+ *
+ * regs - (In) pointer to registers base for the UCC.
+ */
+int ucc_init_guemr(struct ucc_common *regs);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num);
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
new file mode 100644
index 00000000000..39d1c90fd2c
--- /dev/null
+++ b/include/asm-powerpc/ucc_fast.h
@@ -0,0 +1,243 @@
+/*
+ * include/asm-powerpc/ucc_fast.h
+ *
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ u32 regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ enum ucc_fast_channel_protocol_mode mode;
+ enum ucc_fast_transparent_txrx ttx_trx;
+ enum ucc_fast_tx_encoding_method tenc;
+ enum ucc_fast_rx_decoding_method renc;
+ enum ucc_fast_transparent_tcrc tcrc;
+ enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+ struct ucc_fast_info *uf_info;
+ struct ucc_fast *uf_regs; /* a pointer to memory map of UCC regs. */
+ u32 *p_ucce; /* a pointer to the event register in memory. */
+ u32 *p_uccm; /* a pointer to the mask register in memory. */
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif /* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
new file mode 100644
index 00000000000..ca93bc99237
--- /dev/null
+++ b/include/asm-powerpc/ucc_slow.h
@@ -0,0 +1,289 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision */
+#define T_RL 0x00400000 /* retransmission limit */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost */
+#define T_RC 0x003c0000 /* retry count */
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+ /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+ /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+ /* 32-bit CCITT CRC (Ethernet and HDLC) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ struct ucc_slow *us_regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ enum ucc_slow_transparent_tcrc tcrc;
+ enum ucc_slow_channel_protocol_mode mode;
+ enum ucc_slow_diag_mode diag;
+ enum ucc_slow_tx_oversampling_rate tdcr;
+ enum ucc_slow_rx_oversampling_rate rdcr;
+ enum ucc_slow_tx_encoding_method tenc;
+ enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+ struct ucc_slow_info *us_info;
+ struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */
+ struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
+ u32 us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame */
+ u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ u8 *confBd; /* next BD for confirm after Tx */
+ u8 *tx_bd; /* next BD for new Tx request */
+ u8 *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application) */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors) */
+#endif /* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_x
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */
diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h
index 43f7129984c..f1d337ed68d 100644
--- a/include/asm-powerpc/xmon.h
+++ b/include/asm-powerpc/xmon.h
@@ -1,12 +1,22 @@
-#ifndef __PPC_XMON_H
-#define __PPC_XMON_H
-#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_XMON_H
+#define __ASM_POWERPC_XMON_H
-struct pt_regs;
+/*
+ * Copyrignt (C) 2006 IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
-extern int xmon(struct pt_regs *excp);
-extern void xmon_printf(const char *fmt, ...);
-extern void xmon_init(int);
+#ifdef __KERNEL__
+#ifdef CONFIG_XMON
+extern void xmon_setup(void);
+#else
+static inline void xmon_setup(void) { };
#endif
-#endif
+
+#endif /* __KERNEL __ */
+#endif /* __ASM_POWERPC_XMON_H */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 16fbe59edeb..3da29e2d524 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -46,18 +46,17 @@
struct gianfar_platform_data {
/* device specific information */
- u32 device_flags;
-
+ u32 device_flags;
/* board specific information */
- u32 board_flags;
- u32 bus_id;
- u32 phy_id;
- u8 mac_addr[6];
+ u32 board_flags;
+ u32 bus_id;
+ u32 phy_id;
+ u8 mac_addr[6];
};
struct gianfar_mdio_data {
/* board specific information */
- int irq[32];
+ int irq[32];
};
/* Flags related to gianfar device features */
@@ -76,14 +75,13 @@ struct gianfar_mdio_data {
struct fsl_i2c_platform_data {
/* device specific information */
- u32 device_flags;
+ u32 device_flags;
};
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
@@ -101,9 +99,9 @@ enum fsl_usb2_phy_modes {
struct fsl_usb2_platform_data {
/* board specific information */
- enum fsl_usb2_operating_modes operating_mode;
- enum fsl_usb2_phy_modes phy_mode;
- unsigned int port_enables;
+ enum fsl_usb2_operating_modes operating_mode;
+ enum fsl_usb2_phy_modes phy_mode;
+ unsigned int port_enables;
};
/* Flags in fsl_usb2_mph_platform_data */
@@ -121,5 +119,44 @@ struct fsl_spi_platform_data {
u32 sysclk;
};
-#endif /* _FSL_DEVICE_H_ */
-#endif /* __KERNEL__ */
+/* Ethernet interface (phy management and speed)
+*/
+enum enet_interface {
+ ENET_10_MII, /* 10 Base T, MII interface */
+ ENET_10_RMII, /* 10 Base T, RMII interface */
+ ENET_10_RGMII, /* 10 Base T, RGMII interface */
+ ENET_100_MII, /* 100 Base T, MII interface */
+ ENET_100_RMII, /* 100 Base T, RMII interface */
+ ENET_100_RGMII, /* 100 Base T, RGMII interface */
+ ENET_1000_GMII, /* 1000 Base T, GMII interface */
+ ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
+ ENET_1000_TBI, /* 1000 Base T, TBI interface */
+ ENET_1000_RTBI /* 1000 Base T, RTBI interface */
+};
+
+struct ucc_geth_platform_data {
+ /* device specific information */
+ u32 device_flags;
+ u32 phy_reg_addr;
+
+ /* board specific information */
+ u32 board_flags;
+ u8 rx_clock;
+ u8 tx_clock;
+ u32 phy_id;
+ enum enet_interface phy_interface;
+ u32 phy_interrupt;
+ u8 mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
+#define FSL_UGETH_DEV_HAS_RMON 0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001
+ /* if not set use a timer */
+
+#endif /* _FSL_DEVICE_H_ */
+#endif /* __KERNEL__ */