diff options
35 files changed, 670 insertions, 131 deletions
@@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 17 -EXTRAVERSION =-rc3 +EXTRAVERSION =-rc4 NAME=Sliding Snow Leopard # *DOCUMENTATION* diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index 460f72e640e..f9ff2973484 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -274,6 +274,11 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0) goto err_noiommu; + /* Set the resource name, if known. */ + if (sdev) { + res->name = sdev->prom_name; + } + return (void *)res->start; err_noiommu: diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index 787d5f1347e..598682f31eb 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -113,6 +113,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SPARC_32: + case R_SPARC_UA32: location[0] = v >> 24; location[1] = v >> 16; location[2] = v >> 8; diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index ec1c9687d67..4b376fae752 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -251,19 +251,9 @@ EXPORT_SYMBOL(__prom_getchild); EXPORT_SYMBOL(__prom_getsibling); /* sparc library symbols */ -EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strncmp); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(page_kernel); /* Special internal versions of library functions. */ @@ -317,6 +307,3 @@ EXPORT_SYMBOL(do_BUG); /* Sun Power Management Idle Handler */ EXPORT_SYMBOL(pm_idle); - -/* Binfmt_misc needs this */ -EXPORT_SYMBOL(sys_close); diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 1317380fa93..f09a70b8aab 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Sun Apr 2 19:31:04 2006 +# Linux kernel version: 2.6.17-rc3 +# Fri May 12 12:43:49 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -114,6 +114,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_LARGE_ALLOCS=y @@ -430,7 +431,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGICPTI is not set # CONFIG_SCSI_QLA_FC is not set @@ -1042,9 +1042,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1115,6 +1113,14 @@ CONFIG_USB_HIDDEV=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -1303,6 +1309,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c index 6c83e372f75..57987152769 100644 --- a/arch/sparc64/kernel/module.c +++ b/arch/sparc64/kernel/module.c @@ -143,6 +143,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, location[3] = v >> 0; break; + case R_SPARC_DISP32: + v -= (Elf64_Addr) location; + *loc32 = v; + break; + case R_SPARC_WDISP30: v -= (Elf64_Addr) location; *loc32 = (*loc32 & ~0x3fffffff) | diff --git a/block/genhd.c b/block/genhd.c index d9657258962..5a8d3bf02f1 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -182,7 +182,6 @@ static int exact_lock(dev_t dev, void *data) */ void add_disk(struct gendisk *disk) { - get_device(disk->driverfs_dev); disk->flags |= GENHD_FL_UP; blk_register_region(MKDEV(disk->major, disk->first_minor), disk->minors, NULL, exact_match, exact_lock, disk); @@ -428,7 +427,6 @@ static struct attribute * default_attrs[] = { static void disk_release(struct kobject * kobj) { struct gendisk *disk = to_disk(kobj); - put_device(disk->driverfs_dev); kfree(disk->random); kfree(disk->part); free_disk_stats(disk); diff --git a/drivers/block/ub.c b/drivers/block/ub.c index f73446f580d..c688c25992e 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc) kfree(lun); } + usb_set_intfdata(sc->intf, NULL); + usb_put_intf(sc->intf); + usb_put_dev(sc->dev); kfree(sc); } @@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf, // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; usb_set_intfdata(intf, sc); usb_get_dev(sc->dev); - // usb_get_intf(sc->intf); /* Do we need this? */ + /* + * Since we give the interface struct to the block level through + * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent + * oopses on close after a disconnect (kernels 2.6.16 and up). + */ + usb_get_intf(sc->intf); snprintf(sc->name, 12, DRV_NAME "(%d.%d)", sc->dev->bus->busnum, sc->dev->devnum); @@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf, err_dev_desc: usb_set_intfdata(intf, NULL); - // usb_put_intf(sc->intf); + usb_put_intf(sc->intf); usb_put_dev(sc->dev); kfree(sc); err_core: @@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf) * and no URBs left in transit. */ - usb_set_intfdata(intf, NULL); - // usb_put_intf(sc->intf); - sc->intf = NULL; - usb_put_dev(sc->dev); - sc->dev = NULL; - ub_put(sc); } diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 8bd305e47f0..a140e4536a4 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -133,6 +133,9 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); outb(ACBST_STASTR | ACBST_NEGACK, ACBST); + + /* Reset the status register */ + outb(0, ACBST); return; } @@ -228,6 +231,10 @@ static void scx200_acb_poll(struct scx200_acb_iface *iface) timeout = jiffies + POLL_TIMEOUT; while (time_before(jiffies, timeout)) { status = inb(ACBST); + + /* Reset the status register to avoid the hang */ + outb(0, ACBST); + if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) { scx200_acb_machine(iface, status); return; @@ -415,7 +422,6 @@ static int __init scx200_acb_create(const char *text, int base, int index) struct scx200_acb_iface *iface; struct i2c_adapter *adapter; int rc; - char description[64]; iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { @@ -434,10 +440,7 @@ static int __init scx200_acb_create(const char *text, int base, int index) mutex_init(&iface->mutex); - snprintf(description, sizeof(description), "%s ACCESS.bus [%s]", - text, adapter->name); - - if (request_region(base, 8, description) == 0) { + if (!request_region(base, 8, adapter->name)) { printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n", base, base + 8-1); rc = -EBUSY; @@ -524,6 +527,9 @@ static int __init scx200_acb_init(void) } else if (pci_dev_present(divil_pci)) rc = scx200_add_cs553x(); + /* If at least one bus was created, init must succeed */ + if (scx200_acb_list) + return 0; return rc; } diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 7cfedb8d9bc..86fee43502c 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -34,6 +34,8 @@ * * $Id: cm.c 2821 2005-07-08 17:07:28Z sean.hefty $ */ + +#include <linux/completion.h> #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/idr.h> @@ -122,7 +124,7 @@ struct cm_id_private { struct rb_node service_node; struct rb_node sidr_id_node; spinlock_t lock; /* Do not acquire inside cm.lock */ - wait_queue_head_t wait; + struct completion comp; atomic_t refcount; struct ib_mad_send_buf *msg; @@ -159,7 +161,7 @@ static void cm_work_handler(void *data); static inline void cm_deref_id(struct cm_id_private *cm_id_priv) { if (atomic_dec_and_test(&cm_id_priv->refcount)) - wake_up(&cm_id_priv->wait); + complete(&cm_id_priv->comp); } static int cm_alloc_msg(struct cm_id_private *cm_id_priv, @@ -559,7 +561,7 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device, goto error; spin_lock_init(&cm_id_priv->lock); - init_waitqueue_head(&cm_id_priv->wait); + init_completion(&cm_id_priv->comp); INIT_LIST_HEAD(&cm_id_priv->work_list); atomic_set(&cm_id_priv->work_count, -1); atomic_set(&cm_id_priv->refcount, 1); @@ -724,8 +726,8 @@ retest: } cm_free_id(cm_id->local_id); - atomic_dec(&cm_id_priv->refcount); - wait_event(cm_id_priv->wait, !atomic_read(&cm_id_priv->refcount)); + cm_deref_id(cm_id_priv); + wait_for_completion(&cm_id_priv->comp); while ((work = cm_dequeue_work(cm_id_priv)) != NULL) cm_free_work(work); if (cm_id_priv->private_data && cm_id_priv->private_data_len) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 469b6923a2e..5ad41a64314 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -352,7 +352,7 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device, INIT_WORK(&mad_agent_priv->local_work, local_completions, mad_agent_priv); atomic_set(&mad_agent_priv->refcount, 1); - init_waitqueue_head(&mad_agent_priv->wait); + init_completion(&mad_agent_priv->comp); return &mad_agent_priv->agent; @@ -467,7 +467,7 @@ struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device, mad_snoop_priv->agent.qp = port_priv->qp_info[qpn].qp; mad_snoop_priv->agent.port_num = port_num; mad_snoop_priv->mad_snoop_flags = mad_snoop_flags; - init_waitqueue_head(&mad_snoop_priv->wait); + init_completion(&mad_snoop_priv->comp); mad_snoop_priv->snoop_index = register_snoop_agent( &port_priv->qp_info[qpn], mad_snoop_priv); @@ -486,6 +486,18 @@ error1: } EXPORT_SYMBOL(ib_register_mad_snoop); +static inline void deref_mad_agent(struct ib_mad_agent_private *mad_agent_priv) +{ + if (atomic_dec_and_test(&mad_agent_priv->refcount)) + complete(&mad_agent_priv->comp); +} + +static inline void deref_snoop_agent(struct ib_mad_snoop_private *mad_snoop_priv) +{ + if (atomic_dec_and_test(&mad_snoop_priv->refcount)) + complete(&mad_snoop_priv->comp); +} + static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv) { struct ib_mad_port_private *port_priv; @@ -509,9 +521,8 @@ static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv) flush_workqueue(port_priv->wq); ib_cancel_rmpp_recvs(mad_agent_priv); - atomic_dec(&mad_agent_priv->refcount); - wait_event(mad_agent_priv->wait, - !atomic_read(&mad_agent_priv->refcount)); + deref_mad_agent(mad_agent_priv); + wait_for_completion(&mad_agent_priv->comp); kfree(mad_agent_priv->reg_req); ib_dereg_mr(mad_agent_priv->agent.mr); @@ -529,9 +540,8 @@ static void unregister_mad_snoop(struct ib_mad_snoop_private *mad_snoop_priv) atomic_dec(&qp_info->snoop_count); spin_unlock_irqrestore(&qp_info->snoop_lock, flags); - atomic_dec(&mad_snoop_priv->refcount); - wait_event(mad_snoop_priv->wait, - !atomic_read(&mad_snoop_priv->refcount)); + deref_snoop_agent(mad_snoop_priv); + wait_for_completion(&mad_snoop_priv->comp); kfree(mad_snoop_priv); } @@ -600,8 +610,7 @@ static void snoop_send(struct ib_mad_qp_info *qp_info, spin_unlock_irqrestore(&qp_info->snoop_lock, flags); mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent, send_buf, mad_send_wc); - if (atomic_dec_and_test(&mad_snoop_priv->refcount)) - wake_up(&mad_snoop_priv->wait); + deref_snoop_agent(mad_snoop_priv); spin_lock_irqsave(&qp_info->snoop_lock, flags); } spin_unlock_irqrestore(&qp_info->snoop_lock, flags); @@ -626,8 +635,7 @@ static void snoop_recv(struct ib_mad_qp_info *qp_info, spin_unlock_irqrestore(&qp_info->snoop_lock, flags); mad_snoop_priv->agent.recv_handler(&mad_snoop_priv->agent, mad_recv_wc); - if (atomic_dec_and_test(&mad_snoop_priv->refcount)) - wake_up(&mad_snoop_priv->wait); + deref_snoop_agent(mad_snoop_priv); spin_lock_irqsave(&qp_info->snoop_lock, flags); } spin_unlock_irqrestore(&qp_info->snoop_lock, flags); @@ -968,8 +976,7 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf) free_send_rmpp_list(mad_send_wr); kfree(send_buf->mad); - if (atomic_dec_and_test(&mad_agent_priv->refcount)) - wake_up(&mad_agent_priv->wait); + deref_mad_agent(mad_agent_priv); } EXPORT_SYMBOL(ib_free_send_mad); @@ -1757,8 +1764,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv, mad_recv_wc = ib_process_rmpp_recv_wc(mad_agent_priv, mad_recv_wc); if (!mad_recv_wc) { - if (atomic_dec_and_test(&mad_agent_priv->refcount)) - wake_up(&mad_agent_priv->wait); + deref_mad_agent(mad_agent_priv); return; } } @@ -1770,8 +1776,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv, if (!mad_send_wr) { spin_unlock_irqrestore(&mad_agent_priv->lock, flags); ib_free_recv_mad(mad_recv_wc); - if (atomic_dec_and_test(&mad_agent_priv->refcount)) - wake_up(&mad_agent_priv->wait); + deref_mad_agent(mad_agent_priv); return; } ib_mark_mad_done(mad_send_wr); @@ -1790,8 +1795,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv, } else { mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent, mad_recv_wc); - if (atomic_dec_and_test(&mad_agent_priv->refcount)) - wake_up(&mad_agent_priv->wait); + deref_mad_agent(mad_agent_priv); } } @@ -2021,8 +2025,7 @@ void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr, mad_send_wc); /* Release reference on agent taken when sending */ - if (atomic_dec_and_test(&mad_agent_priv->refcount)) - wake_up(&mad_agent_priv->wait); + deref_mad_agent(mad_agent_priv); return; done: spin_unlock_irqrestore(&mad_agent_priv->lock, flags); diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index 6c9c133d71e..b4fa28d3160 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -37,6 +37,7 @@ #ifndef __IB_MAD_PRIV_H__ #define __IB_MAD_PRIV_H__ +#include <linux/completion.h> #include <linux/pci.h> #include <linux/kthread.h> #include <linux/workqueue.h> @@ -108,7 +109,7 @@ struct ib_mad_agent_private { struct list_head rmpp_list; atomic_t refcount; - wait_queue_head_t wait; + struct completion comp; }; struct ib_mad_snoop_private { @@ -117,7 +118,7 @@ struct ib_mad_snoop_private { int snoop_index; int mad_snoop_flags; atomic_t refcount; - wait_queue_head_t wait; + struct completion comp; }; struct ib_mad_send_wr_private { diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index dfd4e588ce0..d4704e054e3 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -49,7 +49,7 @@ struct mad_rmpp_recv { struct list_head list; struct work_struct timeout_work; struct work_struct cleanup_work; - wait_queue_head_t wait; + struct completion comp; enum rmpp_state state; spinlock_t lock; atomic_t refcount; @@ -69,10 +69,16 @@ struct mad_rmpp_recv { u8 method; }; +static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv) +{ + if (atomic_dec_and_test(&rmpp_recv->refcount)) + complete(&rmpp_recv->comp); +} + static void destroy_rmpp_recv(struct mad_rmpp_recv *rmpp_recv) { - atomic_dec(&rmpp_recv->refcount); - wait_event(rmpp_recv->wait, !atomic_read(&rmpp_recv->refcount)); + deref_rmpp_recv(rmpp_recv); + wait_for_completion(&rmpp_recv->comp); ib_destroy_ah(rmpp_recv->ah); kfree(rmpp_recv); } @@ -253,7 +259,7 @@ create_rmpp_recv(struct ib_mad_agent_private *agent, goto error; rmpp_recv->agent = agent; - init_waitqueue_head(&rmpp_recv->wait); + init_completion(&rmpp_recv->comp); INIT_WORK(&rmpp_recv->timeout_work, recv_timeout_handler, rmpp_recv); INIT_WORK(&rmpp_recv->cleanup_work, recv_cleanup_handler, rmpp_recv); spin_lock_init(&rmpp_recv->lock); @@ -279,12 +285,6 @@ error: kfree(rmpp_recv); return NULL; } -static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv) -{ - if (atomic_dec_and_test(&rmpp_recv->refcount)) - wake_up(&rmpp_recv->wait); -} - static struct mad_rmpp_recv * find_rmpp_recv(struct ib_mad_agent_private *agent, struct ib_mad_recv_wc *mad_recv_wc) diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index f6a05965a4e..9164a09b6cc 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -32,6 +32,8 @@ * * $Id: ucm.c 2594 2005-06-13 19:46:02Z libor $ */ + +#include <linux/completion.h> #include <linux/init.h> #include <linux/fs.h> #include <linux/module.h> @@ -72,7 +74,7 @@ struct ib_ucm_file { struct ib_ucm_context { int id; - wait_queue_head_t wait; + struct completion comp; atomic_t ref; int events_reported; @@ -138,7 +140,7 @@ static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) static void ib_ucm_ctx_put(struct ib_ucm_context *ctx) { if (atomic_dec_and_test(&ctx->ref)) - wake_up(&ctx->wait); + complete(&ctx->comp); } static inline int ib_ucm_new_cm_id(int event) @@ -178,7 +180,7 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file) return NULL; atomic_set(&ctx->ref, 1); - init_waitqueue_head(&ctx->wait); + init_completion(&ctx->comp); ctx->file = file; INIT_LIST_HEAD(&ctx->events); @@ -586,8 +588,8 @@ static ssize_t ib_ucm_destroy_id(struct ib_ucm_file *file, if (IS_ERR(ctx)) return PTR_ERR(ctx); - atomic_dec(&ctx->ref); - wait_event(ctx->wait, !atomic_read(&ctx->ref)); + ib_ucm_ctx_put(ctx); + wait_for_completion(&ctx->comp); /* No new events will be generated after destroying the cm_id. */ ib_destroy_cm_id(ctx->cm_id); diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 398add4d4cb..3697edafd6d 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -116,10 +116,9 @@ static int __devinit ipath_init_one(struct pci_dev *, #define PCI_DEVICE_ID_INFINIPATH_PE800 0x10 static const struct pci_device_id ipath_pci_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, - PCI_DEVICE_ID_INFINIPATH_HT)}, - {PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, - PCI_DEVICE_ID_INFINIPATH_PE800)}, + { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) }, + { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) }, + { 0, } }; MODULE_DEVICE_TABLE(pci, ipath_pci_tbl); diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c index 383a95f34a0..239e108b8ed 100644 --- a/drivers/sbus/char/openprom.c +++ b/drivers/sbus/char/openprom.c @@ -392,13 +392,16 @@ static int openprom_bsd_ioctl(struct inode * inode, struct file * file, return -ENOMEM; } - prom_getproperty(op.op_nodeid, str, tmp, len); - - tmp[len] = '\0'; + cnt = prom_getproperty(op.op_nodeid, str, tmp, len); + if (cnt <= 0) { + error = -EINVAL; + } else { + tmp[len] = '\0'; - if (__copy_to_user(argp, &op, sizeof(op)) != 0 - || copy_to_user(op.op_buf, tmp, len) != 0) - error = -EFAULT; + if (__copy_to_user(argp, &op, sizeof(op)) != 0 || + copy_to_user(op.op_buf, tmp, len) != 0) + error = -EFAULT; + } kfree(tmp); kfree(str); diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 7860c8a5800..956b7a1e8af 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch"; #define RESUBMIT_DELAY 1000 /* milliseconds */ #define DEFAULT_BULK_ALTSETTING 1 -#define DEFAULT_ISOC_ALTSETTING 2 +#define DEFAULT_ISOC_ALTSETTING 3 #define DEFAULT_DL_512_FIRST 0 #define DEFAULT_ENABLE_ISOC 0 #define DEFAULT_SW_BUFFERING 0 diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index c1211fc037d..546249843b8 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm"; #define UDSL_MAX_RCV_URBS 16 #define UDSL_MAX_SND_URBS 16 -#define UDSL_MAX_BUF_SIZE 64 * 1024 /* bytes */ +#define UDSL_MAX_BUF_SIZE 65536 #define UDSL_DEFAULT_RCV_URBS 4 #define UDSL_DEFAULT_SND_URBS 4 -#define UDSL_DEFAULT_RCV_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */ -#define UDSL_DEFAULT_SND_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */ +#define UDSL_DEFAULT_RCV_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */ +#define UDSL_DEFAULT_SND_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */ #define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD) @@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes, module_param(snd_buf_bytes, uint, S_IRUGO); MODULE_PARM_DESC(snd_buf_bytes, "Size of the buffers used for transmission, in bytes (range: 1-" - __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: " + __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: " __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")"); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index fbd938d4ea5..e2e00ba4e1e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd, USB_SPEED_FULL; hcd->self.root_hub = rhdev; + /* wakeup flag init defaults to "everything works" for root hubs, + * but drivers can override it in reset() if needed, along with + * recording the overall controller's system wakeup capability. + */ + device_init_wakeup(&rhdev->dev, 1); + /* "reset" is misnamed; its role is now one-time init. the controller * should already have been reset (and boot firmware kicked off etc). */ @@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_hcd_driver_setup; } - /* wakeup flag init is in transition; for now we can't rely on PCI to - * initialize these bits properly, so we let reset() override it. - * This init should _precede_ the reset() once PCI behaves. - */ - device_init_wakeup(&rhdev->dev, - device_can_wakeup(hcd->self.controller)); - /* NOTE: root hub and controller capabilities may not be the same */ if (device_can_wakeup(hcd->self.controller) && device_can_wakeup(&hcd->self.root_hub->dev)) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0c87f73f293..90b8d43c6b3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1168,19 +1168,9 @@ static inline const char *plural(int n) static int choose_configuration(struct usb_device *udev) { int i; - u16 devstatus; - int bus_powered; int num_configs; struct usb_host_config *c, *best; - /* If this fails, assume the device is bus-powered */ - devstatus = 0; - usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); - le16_to_cpus(&devstatus); - bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0); - dev_dbg(&udev->dev, "device is %s-powered\n", - bus_powered ? "bus" : "self"); - best = NULL; c = udev->config; num_configs = udev->descriptor.bNumConfigurations; @@ -1197,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev) * similar errors in their descriptors. If the next test * were allowed to execute, such configurations would always * be rejected and the devices would not work as expected. + * In the meantime, we run the risk of selecting a config + * that requires external power at a time when that power + * isn't available. It seems to be the lesser of two evils. + * + * Bugzilla #6448 reports a device that appears to crash + * when it receives a GET_DEVICE_STATUS request! We don't + * have any other way to tell whether a device is self-powered, + * but since we don't use that information anywhere but here, + * the call has been removed. + * + * Maybe the GET_DEVICE_STATUS call and the test below can + * be reinstated when device firmwares become more reliable. + * Don't hold your breath. */ #if 0 /* Rule out self-powered configs for a bus-powered device */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 544f7589912..73f5a379d9b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci) i = ohci->num_ports; while (i--) ohci_writel (ohci, RH_PS_PSS, - &ohci->regs->roothub.portstatus [temp]); + &ohci->regs->roothub.portstatus [i]); ohci_dbg (ohci, "restart complete\n"); } return 0; diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index f419bd82ab7..435273e7c85 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1557,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_HP 0x03f0 #define USB_DEVICE_ID_HP_USBHUB_KB 0x020c +#define USB_VENDOR_ID_IBM 0x04b3 +#define USB_DEVICE_ID_IBM_USBHUB_KB 0x3005 + #define USB_VENDOR_ID_CREATIVELABS 0x062a #define USB_DEVICE_ID_CREATIVELABS_SILVERCREST 0x0201 @@ -1681,6 +1684,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET}, { USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET }, { USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET }, { USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET }, diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index 3824df33094..1fd9cb85f4c 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/usb.h> +#include <linux/delay.h> #define MAX_INTEL_HEX_RECORD_LENGTH 16 typedef struct _INTEL_HEX_RECORD @@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); + msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI * Note: collect up to 1023 (yes!) bytes and send them with @@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev) goto wraperr; } } + msleep(250); /* let device settle */ /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); @@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } + msleep(250); /* let device settle */ /* return 1 to fail the driver inialization * and give real driver change to load */ diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 52fea2e08db..fe351371f27 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/usb.h> +#include <linux/delay.h> #define MAX_INTEL_HEX_RECORD_LENGTH 16 typedef struct _INTEL_HEX_RECORD @@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); + msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI * Note: collect up to 1023 (yes!) bytes and send them with @@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } + msleep(250); /* let device settle */ /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ @@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __FUNCTION__, err); goto wraperr; } + msleep(250); /* let device settle */ kfree(buf); diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 2deb4c01539..7683926a1b6 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd) set_register(pegasus, PhyCtrl, (indx | PHY_READ)); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, PhyCtrl, 1, data); + if (ret == -ESHUTDOWN) + goto fail; if (data[0] & PHY_DONE) break; } @@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd) *regd = le16_to_cpu(regdi); return ret; } +fail: if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); @@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd) set_register(pegasus, PhyCtrl, (indx | PHY_WRITE)); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, PhyCtrl, 1, data); + if (ret == -ESHUTDOWN) + goto fail; if (data[0] & PHY_DONE) break; } if (i < REG_TIMEOUT) return ret; +fail: if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); return -ETIMEDOUT; @@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata) ret = get_registers(pegasus, EpromCtrl, 1, &tmp); if (tmp & EPROM_DONE) break; + if (ret == -ESHUTDOWN) + goto fail; } if (i < REG_TIMEOUT) { ret = get_registers(pegasus, EpromData, 2, &retdatai); @@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata) return ret; } +fail: if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); return -ETIMEDOUT; @@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, EpromCtrl, 1, &tmp); + if (ret == -ESHUTDOWN) + goto fail; if (tmp & EPROM_DONE) break; } disable_eprom_write(pegasus); if (i < REG_TIMEOUT) return ret; +fail: if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); return -ETIMEDOUT; @@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message) struct pegasus *pegasus = usb_get_intfdata(intf); netif_device_detach (pegasus->net); + cancel_delayed_work(&pegasus->carrier_check); if (netif_running(pegasus->net)) { - cancel_delayed_work(&pegasus->carrier_check); - usb_kill_urb(pegasus->rx_urb); usb_kill_urb(pegasus->intr_urb); } @@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf) pegasus->intr_urb->status = 0; pegasus->intr_urb->actual_length = 0; intr_callback(pegasus->intr_urb, NULL); - - queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check, - CARRIER_CHECK_DELAY); } + queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check, + CARRIER_CHECK_DELAY); return 0; } diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index f96b73f54bf..5c60be52156 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA To compile this driver as a module, choose M here: the module will be called anydata. +config USB_SERIAL_ARK3116 + tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to use a ARK Micro 3116 USB to Serial + device. + + To compile this driver as a module, choose M here: the + module will be called ark3116 + config USB_SERIAL_BELKIN tristate "USB Belkin and Peracom Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 93c21245b1a..5a0960fc9d3 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -13,6 +13,7 @@ usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o +obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index dbf1f063098..694b205f9b7 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -18,6 +18,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ + { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c new file mode 100644 index 00000000000..8dec796222a --- /dev/null +++ b/drivers/usb/serial/ark3116.c @@ -0,0 +1,465 @@ +/* + * ark3116 + * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547, + * productid=0x0232) (used in a datacable called KQ-U8A) + * + * - based on code by krisfx -> thanks !! + * (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457) + * + * - based on logs created by usbsnoopy + * + * Author : Simon Schulz [ark3116_driver<AT>auctionant.de] + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usb-serial.h" + + +static int debug; + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x6547, 0x0232) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct ark3116_private { + spinlock_t lock; + u8 termios_initialized; +}; + +static inline void ARK3116_SND(struct usb_serial *serial, int seq, + __u8 request, __u8 requesttype, + __u16 value, __u16 index) +{ + int result; + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev,0), + request, requesttype, value, index, + NULL,0x00, 1000); + dbg("%03d > ok",seq); +} + +static inline void ARK3116_RCV(struct usb_serial *serial, int seq, + __u8 request, __u8 requesttype, + __u16 value, __u16 index, __u8 expected, + char *buf) +{ + int result; + result = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev,0), + request, requesttype, value, index, + buf, 0x0000001, 1000); + if (result) + dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]); + else + dbg("%03d < 0 bytes", seq); +} + + +static inline void ARK3116_RCV_QUIET(struct usb_serial *serial, + __u8 request, __u8 requesttype, + __u16 value, __u16 index, char *buf) +{ + usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev,0), + request, requesttype, value, index, + buf, 0x0000001, 1000); +} + + +static int ark3116_attach(struct usb_serial *serial) +{ + char *buf; + struct ark3116_private *priv; + int i; + + for (i = 0; i < serial->num_ports; ++i) { + priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL); + if (!priv) + goto cleanup; + memset (priv, 0x00, sizeof (struct ark3116_private)); + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(serial->port[i], priv); + } + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + dbg("error kmalloc -> out of mem ?"); + goto cleanup; + } + + /* 3 */ + ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002); + ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001); + ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008); + ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B); + + /* <-- seq7 */ + ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf); + ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003); + ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000); + ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001); + ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003); + + /* <-- seq12 */ + ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf); + ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004); + + /* 14 */ + ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf); + ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004); + + /* 16 */ + ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf); + /* --> seq17 */ + ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004); + + /* <-- seq18 */ + ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf); + + /* --> seq19 */ + ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004); + + + /* <-- seq20 */ + /* seems like serial port status info (RTS, CTS,...) */ + /* returns modem control line status ?! */ + ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf); + + /* set 9600 baud & do some init ?! */ + ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003); + ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000); + ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001); + ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003); + ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf); + ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003); + ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf); + ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003); + + kfree(buf); + return(0); + +cleanup: + for (--i; i>=0; --i) + usb_set_serial_port_data(serial->port[i], NULL); + return -ENOMEM; +} + +static void ark3116_set_termios(struct usb_serial_port *port, + struct termios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct ark3116_private *priv = usb_get_serial_port_data(port); + unsigned int cflag = port->tty->termios->c_cflag; + unsigned long flags; + int baud; + int ark3116_baud; + char *buf; + char config; + + config = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if ((!port->tty) || (!port->tty->termios)) { + dbg("%s - no tty structures", __FUNCTION__); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (!priv->termios_initialized) { + *(port->tty->termios) = tty_std_termios; + port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + priv->termios_initialized = 1; + } + spin_unlock_irqrestore(&priv->lock, flags); + + cflag = port->tty->termios->c_cflag; + + /* check that they really want us to change something: */ + if (old_termios) { + if ((cflag == old_termios->c_cflag) && + (RELEVANT_IFLAG(port->tty->termios->c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) { + dbg("%s - nothing to change...", __FUNCTION__); + return; + } + } + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + dbg("error kmalloc"); + return; + } + + /* set data bit count (8/7/6/5) */ + if (cflag & CSIZE){ + switch (cflag & CSIZE){ + case CS5: + config |= 0x00; + dbg("setting CS5"); + break; + case CS6: + config |= 0x01; + dbg("setting CS6"); + break; + case CS7: + config |= 0x02; + dbg("setting CS7"); + break; + default: + err ("CSIZE was set but not CS5-CS8, using CS8!"); + case CS8: + config |= 0x03; + dbg("setting CS8"); + break; + } + } + + /* set parity (NONE,EVEN,ODD) */ + if (cflag & PARENB){ + if (cflag & PARODD) { + config |= 0x08; + dbg("setting parity to ODD"); + } else { + config |= 0x18; + dbg("setting parity to EVEN"); + } + } else { + dbg("setting parity to NONE"); + } + + /* SET STOPBIT (1/2) */ + if (cflag & CSTOPB) { + config |= 0x04; + dbg ("setting 2 stop bits"); + } else { + dbg ("setting 1 stop bit"); + } + + + /* set baudrate: */ + baud = 0; + switch (cflag & CBAUD){ + case B0: + err("can't set 0baud, using 9600 instead"); + break; + case B75: baud = 75; break; + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B1800: baud = 1800; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + case B57600: baud = 57600; break; + case B115200: baud = 115200; break; + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; + default: + dbg("does not support the baudrate requested (fix it)"); + break; + } + + /* set 9600 as default (if given baudrate is invalid for example) */ + if (baud == 0) + baud = 9600; + + /* + * found by try'n'error, be careful, maybe there are other options + * for multiplicator etc! + */ + if (baud == 460800) + /* strange, for 460800 the formula is wrong + * (dont use round(), then 9600baud is wrong) */ + ark3116_baud = 7; + else + ark3116_baud = 3000000 / baud; + + /* ? */ + ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf); + /* offset = buf[0]; */ + /* offset = 0x03; */ + /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */ + + + /* set baudrate */ + dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud); + ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003); + ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000); + ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001); + ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003); + + /* ? */ + ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf); + ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003); + + /* set data bit count, stop bit count & parity: */ + dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config); + ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf); + ARK3116_SND(serial,154,0xFE,0x40,config,0x0003); + + if (cflag & CRTSCTS) + dbg("CRTSCTS not supported by chipset ?!"); + + /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */ + + kfree(buf); + return; +} + +static int ark3116_open(struct usb_serial_port *port, struct file *filp) +{ + struct termios tmp_termios; + struct usb_serial *serial = port->serial; + char *buf; + int result = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + dbg("error kmalloc -> out of mem ?"); + return -ENOMEM; + } + + result = usb_serial_generic_open(port, filp); + if (result) + return result; + + /* open */ + ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf); + + ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003); + ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000); + ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001); + ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003); + + ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf); + ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004); + + ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf); + ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004); + + ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf); + + ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004); + + ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf); + + ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004); + + /* returns different values (control lines ?!) */ + ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf); + + /* initialise termios: */ + if (port->tty) + ark3116_set_termios(port, &tmp_termios); + + kfree(buf); + + return result; + +} + +static int ark3116_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + dbg("ioctl not supported yet..."); + return -ENOIOCTLCMD; +} + +static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file) +{ + struct usb_serial *serial = port->serial; + char *buf; + char temp; + + /* seems like serial port status info (RTS, CTS,...) is stored + * in reg(?) 0x0006 + * pcb connection point 11 = GND -> sets bit4 of response + * pcb connection point 7 = GND -> sets bit6 of response + */ + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + dbg("error kmalloc"); + return -ENOMEM; + } + + /* read register: */ + ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf); + temp = buf[0]; + kfree(buf); + + /* i do not really know if bit4=CTS and bit6=DSR... was just a + * quick guess !! + */ + return (temp & (1<<4) ? TIOCM_CTS : 0) | + (temp & (1<<6) ? TIOCM_DSR : 0); +} + +static struct usb_driver ark3116_driver = { + .name = "ark3116", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver ark3116_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ark3116", + }, + .id_table = id_table, + .num_interrupt_in = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .attach = ark3116_attach, + .set_termios = ark3116_set_termios, + .ioctl = ark3116_ioctl, + .tiocmget = ark3116_tiocmget, + .open = ark3116_open, +}; + +static int __init ark3116_init(void) +{ + int retval; + + retval = usb_serial_register(&ark3116_device); + if (retval) + return retval; + retval = usb_register(&ark3116_driver); + if (retval) + usb_serial_deregister(&ark3116_device); + return retval; +} + +static void __exit ark3116_exit(void) +{ + usb_deregister(&ark3116_driver); + usb_serial_deregister(&ark3116_device); +} + +module_init(ark3116_init); +module_exit(ark3116_exit); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); + diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 82151207d81..986d7622273 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -307,6 +307,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, @@ -498,6 +499,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 2c55a5ea9c9..d69a917e768 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -32,6 +32,10 @@ #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + + /* www.irtrans.de device */ #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ @@ -426,6 +430,11 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 476cda107f4..c62cc287651 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) return result; } +EXPORT_SYMBOL_GPL(usb_serial_generic_open); static void generic_cleanup (struct usb_serial_port *port) { diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 4d40704dea2..238033a8709 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf return (0); } - spin_lock(&port->lock); - if (port->write_urb_busy) { - spin_unlock(&port->lock); + spin_lock(&wport->lock); + if (wport->write_urb_busy) { + spin_unlock(&wport->lock); dbg("%s - already writing", __FUNCTION__); return 0; } - port->write_urb_busy = 1; - spin_unlock(&port->lock); + wport->write_urb_busy = 1; + spin_unlock(&wport->lock); count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count; @@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf wport->write_urb->dev = serial->dev; result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { - port->write_urb_busy = 0; + wport->write_urb_busy = 0; err("%s - failed submitting write urb, error %d", __FUNCTION__, result); } else result = count; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 071f86a59c0..9c36f0ece20 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp) portNumber = tty->index - serial->minor; port = serial->port[portNumber]; - if (!port) - return -ENODEV; + if (!port) { + retval = -ENODEV; + goto bailout_kref_put; + } - if (mutex_lock_interruptible(&port->mutex)) - return -ERESTARTSYS; + if (mutex_lock_interruptible(&port->mutex)) { + retval = -ERESTARTSYS; + goto bailout_kref_put; + } ++port->open_count; @@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) * safe because we are called with BKL held */ if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; - goto bailout_kref_put; + goto bailout_mutex_unlock; } /* only call the device specific open if this @@ -224,10 +228,11 @@ static int serial_open (struct tty_struct *tty, struct file * filp) bailout_module_put: module_put(serial->type->driver.owner); -bailout_kref_put: - kref_put(&serial->kref, destroy_serial); +bailout_mutex_unlock: port->open_count = 0; mutex_unlock(&port->mutex); +bailout_kref_put: + kref_put(&serial->kref, destroy_serial); return retval; } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 6ecc180beb7..ccb0c1fdf1b 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -189,7 +189,7 @@ config FRAME_POINTER config UNWIND_INFO bool "Compile the kernel with frame unwind information" depends on !IA64 - depends on !MODULES || !(MIPS || PARISC || PPC || SUPERH || SPARC64 || V850) + depends on !MODULES || !(MIPS || PARISC || PPC || SUPERH || V850) help If you say Y here the resulting kernel image will be slightly larger but not slower, and it will give very useful debugging information. |