aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c185
1 files changed, 95 insertions, 90 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index d9d0ec49e60..8a5f5825bb7 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -33,19 +33,30 @@
/* ----- global defines ----------------------------------------------- */
-#define DEB(x) if (i2c_debug>=1) x;
-#define DEB2(x) if (i2c_debug>=2) x;
-#define DEBSTAT(x) if (i2c_debug>=3) x; /* print several statistical values*/
-#define DEBPROTO(x) if (i2c_debug>=9) { x; }
- /* debug the protocol by showing transferred bits */
+#ifdef DEBUG
+#define bit_dbg(level, dev, format, args...) \
+ do { \
+ if (i2c_debug >= level) \
+ dev_dbg(dev, format, ##args); \
+ } while (0)
+#else
+#define bit_dbg(level, dev, format, args...) \
+ do {} while (0)
+#endif /* DEBUG */
/* ----- global variables --------------------------------------------- */
-/* module parameters:
- */
-static int i2c_debug;
static int bit_test; /* see if the line-setting functions work */
+module_param(bit_test, bool, 0);
+MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
+
+#ifdef DEBUG
+static int i2c_debug = 1;
+module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(i2c_debug,
+ "debug level - 0 off; 1 normal; 2 verbose; 3 very verbose");
+#endif
/* --- setting states on the bus with the right timing: --------------- */
@@ -98,7 +109,11 @@ static int sclhi(struct i2c_algo_bit_data *adap)
}
cond_resched();
}
- DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));
+#ifdef DEBUG
+ if (jiffies != start && i2c_debug >= 3)
+ pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go "
+ "high\n", jiffies - start);
+#endif
done:
udelay(adap->udelay);
@@ -110,7 +125,6 @@ done:
static void i2c_start(struct i2c_algo_bit_data *adap)
{
/* assert: scl, sda are high */
- DEBPROTO(printk("S "));
setsda(adap, 0);
udelay(adap->udelay);
scllo(adap);
@@ -119,7 +133,6 @@ static void i2c_start(struct i2c_algo_bit_data *adap)
static void i2c_repstart(struct i2c_algo_bit_data *adap)
{
/* assert: scl is low */
- DEBPROTO(printk(" Sr "));
sdahi(adap);
sclhi(adap);
setsda(adap, 0);
@@ -130,7 +143,6 @@ static void i2c_repstart(struct i2c_algo_bit_data *adap)
static void i2c_stop(struct i2c_algo_bit_data *adap)
{
- DEBPROTO(printk("P\n"));
/* assert: scl is low */
sdalo(adap);
sclhi(adap);
@@ -147,7 +159,7 @@ static void i2c_stop(struct i2c_algo_bit_data *adap)
* 0 if the device did not ack
* -ETIMEDOUT if an error occurred (while raising the scl line)
*/
-static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
+static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c)
{
int i;
int sb;
@@ -156,12 +168,12 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
/* assert: scl is low */
for ( i=7 ; i>=0 ; i-- ) {
- sb = c & ( 1 << i );
+ sb = (c >> i) & 1;
setsda(adap,sb);
udelay((adap->udelay + 1) / 2);
- DEBPROTO(printk(KERN_DEBUG "%d",sb!=0));
if (sclhi(adap)<0) { /* timed out */
- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i));
+ bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
+ "timeout at bit #%d\n", (int)c, i);
return -ETIMEDOUT;
};
/* do arbitration here:
@@ -171,17 +183,17 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
}
sdahi(adap);
if (sclhi(adap)<0){ /* timeout */
- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at ack\n", c&0xff));
- return -ETIMEDOUT;
+ bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
+ "timeout at ack\n", (int)c);
+ return -ETIMEDOUT;
};
/* read ack: SDA should be pulled down by slave */
- ack=getsda(adap); /* ack: sda is pulled low ->success. */
- DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x , getsda() = %d\n", c & 0xff, ack));
+ ack = !getsda(adap); /* ack: sda is pulled low -> success */
+ bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c,
+ ack ? "A" : "NA");
- DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) );
- DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") );
scllo(adap);
- return 0==ack; /* return 1 if device acked */
+ return ack;
/* assert: scl is low (sda undef) */
}
@@ -198,7 +210,8 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
sdahi(adap);
for (i=0;i<8;i++) {
if (sclhi(adap)<0) { /* timeout */
- DEB2(printk(KERN_DEBUG " i2c_inb: timeout at bit #%d\n", 7-i));
+ bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit "
+ "#%d\n", 7 - i);
return -ETIMEDOUT;
};
indata *= 2;
@@ -208,10 +221,7 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
udelay(i == 7 ? adap->udelay / 2 : adap->udelay);
}
/* assert: scl is low */
- DEB2(printk(KERN_DEBUG "i2c_inb: 0x%02x\n", indata & 0xff));
-
- DEBPROTO(printk(KERN_DEBUG " 0x%02x", indata & 0xff));
- return (int) (indata & 0xff);
+ return indata;
}
/*
@@ -222,73 +232,67 @@ static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
int scl,sda;
if (adap->getscl==NULL)
- printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "
- "SCL is not readable.\n");
+ pr_info("%s: Testing SDA only, SCL is not readable\n", name);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);
if (!scl || !sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);
+ printk(KERN_WARNING "%s: bus seems to be busy\n", name);
goto bailout;
}
sdalo(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);
if ( 0 != sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");
+ printk(KERN_WARNING "%s: SDA stuck high!\n", name);
goto bailout;
}
if ( 0 == scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
- "while pulling SDA low!\n");
+ printk(KERN_WARNING "%s: SCL unexpected low "
+ "while pulling SDA low!\n", name);
goto bailout;
}
sdahi(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);
if ( 0 == sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");
+ printk(KERN_WARNING "%s: SDA stuck low!\n", name);
goto bailout;
}
if ( 0 == scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
- "while pulling SDA high!\n");
+ printk(KERN_WARNING "%s: SCL unexpected low "
+ "while pulling SDA high!\n", name);
goto bailout;
}
scllo(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?0:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);
if ( 0 != scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");
+ printk(KERN_WARNING "%s: SCL stuck high!\n", name);
goto bailout;
}
if ( 0 == sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
- "while pulling SCL low!\n");
+ printk(KERN_WARNING "%s: SDA unexpected low "
+ "while pulling SCL low!\n", name);
goto bailout;
}
sclhi(adap);
sda=getsda(adap);
scl=(adap->getscl==NULL?1:getscl(adap));
- printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);
if ( 0 == scl ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");
+ printk(KERN_WARNING "%s: SCL stuck low!\n", name);
goto bailout;
}
if ( 0 == sda ) {
- printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
- "while pulling SCL high!\n");
+ printk(KERN_WARNING "%s: SDA unexpected low "
+ "while pulling SCL high!\n", name);
goto bailout;
}
- printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name);
+ pr_info("%s: Test OK\n", name);
return 0;
bailout:
sdahi(adap);
@@ -315,32 +319,31 @@ static int try_address(struct i2c_adapter *i2c_adap,
ret = i2c_outb(i2c_adap,addr);
if (ret == 1 || i == retries)
break;
+ bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
i2c_stop(adap);
udelay(adap->udelay);
yield();
+ bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
i2c_start(adap);
}
- DEB2(if (i)
- printk(KERN_DEBUG "i2c-algo-bit.o: Used %d tries to %s client at 0x%02x : %s\n",
- i+1, addr & 1 ? "read" : "write", addr>>1,
- ret==1 ? "success" : ret==0 ? "no ack" : "failed, timeout?" )
- );
+ if (i && ret)
+ bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at "
+ "0x%02x: %s\n", i + 1,
+ addr & 1 ? "read from" : "write to", addr >> 1,
+ ret == 1 ? "success" : "failed, timeout?");
return ret;
}
static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
- char c;
- const char *temp = msg->buf;
+ const unsigned char *temp = msg->buf;
int count = msg->len;
unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
int retval;
int wrcount=0;
while (count > 0) {
- c = *temp;
- DEB2(dev_dbg(&i2c_adap->dev, "sendbytes: writing %2.2X\n", c&0xff));
- retval = i2c_outb(i2c_adap,c);
+ retval = i2c_outb(i2c_adap, *temp);
if ((retval>0) || (nak_ok && (retval==0))) { /* ok or ignored NAK */
count--;
temp++;
@@ -359,7 +362,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
int inval;
int rdcount=0; /* counts bytes read */
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
- char *temp = msg->buf;
+ unsigned char *temp = msg->buf;
int count = msg->len;
while (count > 0) {
@@ -368,28 +371,26 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
*temp = inval;
rdcount++;
} else { /* read timed out */
- printk(KERN_ERR "i2c-algo-bit.o: readbytes: i2c_inb timed out.\n");
break;
}
temp++;
count--;
- if (msg->flags & I2C_M_NO_RD_ACK)
+ if (msg->flags & I2C_M_NO_RD_ACK) {
+ bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x\n",
+ inval);
continue;
+ }
/* assert: sda is high */
- if ( count > 0 ) { /* send ack */
+ if (count) /* send ack */
setsda(adap, 0);
- udelay((adap->udelay + 1) / 2);
- DEBPROTO(printk(" Am "));
- } else {
- /* neg. ack on last byte */
- udelay((adap->udelay + 1) / 2);
- DEBPROTO(printk(" NAm "));
- }
+ udelay((adap->udelay + 1) / 2);
+ bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x %s\n", inval,
+ count ? "A" : "NA");
if (sclhi(adap)<0) { /* timeout */
- printk(KERN_ERR "i2c-algo-bit.o: readbytes: Timeout at ack\n");
+ dev_err(&i2c_adap->dev, "readbytes: timeout at ack\n");
return -ETIMEDOUT;
};
scllo(adap);
@@ -398,8 +399,8 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
transaction length as the first read byte. */
if (rdcount == 1 && (msg->flags & I2C_M_RECV_LEN)) {
if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) {
- printk(KERN_ERR "i2c-algo-bit: readbytes: "
- "invalid block length (%d)\n", inval);
+ dev_err(&i2c_adap->dev, "readbytes: invalid "
+ "block length (%d)\n", inval);
return -EREMOTEIO;
}
/* The original count value accounts for the extra
@@ -434,27 +435,31 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if ( (flags & I2C_M_TEN) ) {
/* a ten bit address */
addr = 0xf0 | (( msg->addr >> 7) & 0x03);
- DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
+ bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
/* try extended address code...*/
ret = try_address(i2c_adap, addr, retries);
if ((ret != 1) && !nak_ok) {
- printk(KERN_ERR "died at extended address code.\n");
+ dev_err(&i2c_adap->dev,
+ "died at extended address code\n");
return -EREMOTEIO;
}
/* the remaining 8 bit address */
ret = i2c_outb(i2c_adap,msg->addr & 0x7f);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
- printk(KERN_ERR "died at 2nd address code.\n");
+ dev_err(&i2c_adap->dev, "died at 2nd address code\n");
return -EREMOTEIO;
}
if ( flags & I2C_M_RD ) {
+ bit_dbg(3, &i2c_adap->dev, "emitting repeated "
+ "start condition\n");
i2c_repstart(adap);
/* okay, now switch into reading mode */
addr |= 0x01;
ret = try_address(i2c_adap, addr, retries);
if ((ret!=1) && !nak_ok) {
- printk(KERN_ERR "died at extended address code.\n");
+ dev_err(&i2c_adap->dev,
+ "died at repeated address code\n");
return -EREMOTEIO;
}
}
@@ -481,25 +486,31 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
int i,ret;
unsigned short nak_ok;
+ bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
i2c_start(adap);
for (i=0;i<num;i++) {
pmsg = &msgs[i];
nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
if (!(pmsg->flags & I2C_M_NOSTART)) {
if (i) {
+ bit_dbg(3, &i2c_adap->dev, "emitting "
+ "repeated start condition\n");
i2c_repstart(adap);
}
ret = bit_doAddress(i2c_adap, pmsg);
if ((ret != 0) && !nak_ok) {
- DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: NAK from device addr %2.2x msg #%d\n"
- ,msgs[i].addr,i));
+ bit_dbg(1, &i2c_adap->dev, "NAK from "
+ "device addr 0x%02x msg #%d\n",
+ msgs[i].addr, i);
goto bailout;
}
}
if (pmsg->flags & I2C_M_RD ) {
/* read bytes into buffer*/
ret = readbytes(i2c_adap, pmsg);
- DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: read %d bytes.\n",ret));
+ if (ret >= 1)
+ bit_dbg(2, &i2c_adap->dev, "read %d byte%s\n",
+ ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
ret = -EREMOTEIO;
@@ -508,7 +519,9 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
} else {
/* write bytes from buffer */
ret = sendbytes(i2c_adap, pmsg);
- DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: wrote %d bytes.\n",ret));
+ if (ret >= 1)
+ bit_dbg(2, &i2c_adap->dev, "wrote %d byte%s\n",
+ ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
ret = -EREMOTEIO;
@@ -519,6 +532,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
ret = i;
bailout:
+ bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
i2c_stop(adap);
return ret;
}
@@ -552,8 +566,6 @@ static int i2c_bit_prepare_bus(struct i2c_adapter *adap)
return -ENODEV;
}
- DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));
-
/* register new adapter to i2c module... */
adap->algo = &i2c_bit_algo;
@@ -590,10 +602,3 @@ EXPORT_SYMBOL(i2c_bit_add_numbered_bus);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
MODULE_LICENSE("GPL");
-
-module_param(bit_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
-MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol");