aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/media/dvb/dvb-usb/dibusb-common.c23
-rw-r--r--drivers/media/dvb/frontends/mt2060.c312
-rw-r--r--drivers/media/dvb/frontends/mt2060.h44
-rw-r--r--drivers/media/dvb/frontends/mt2060_priv.h95
4 files changed, 472 insertions, 2 deletions
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index e079ba95d38..88062b219b9 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -234,12 +234,31 @@ EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d)
{
int ret;
+ u8 a,b;
+ u16 if1=1220;
if (d->tuner_pass_ctrl) {
struct dibusb_state *st = d->priv;
d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address);
- /* check for mt2060 */
- if ((ret = mt2060_attach(&st->mt2060,&stk3000p_mt2060_config, &d->i2c_adap)) != 0) {
+ // First IF calibration for Liteon Sticks
+ if (d->udev->descriptor.idVendor == USB_VID_LITEON &&
+ d->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) {
+ dibusb_read_eeprom_byte(d,0x7E,&a);
+ dibusb_read_eeprom_byte(d,0x7F,&b);
+ if (a == 0xFF && b == 0xFF) {
+ if1 = 1220;
+ } else
+ if (a == 0x00) {
+ if1 = 1220+b;
+ } else
+ if (a == 0x80) {
+ if1 = 1220-b;
+ } else {
+ warn("LITE-ON DVB-T Tuner : Strange IF1 calibration :%2X %2X\n",(int)a,(int)b);
+ if1 = 1220;
+ }
+ }
+ if ((ret = mt2060_attach(&st->mt2060,&stk3000p_mt2060_config, &d->i2c_adap,if1)) != 0) {
/* not found - use panasonic pll parameters */
d->pll_addr = 0x60;
d->pll_desc = &dvb_pll_env57h1xd5;
diff --git a/drivers/media/dvb/frontends/mt2060.c b/drivers/media/dvb/frontends/mt2060.c
new file mode 100644
index 00000000000..aa92c1c51e6
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2060.c
@@ -0,0 +1,312 @@
+/*
+ * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
+ *
+ * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+/* See mt2060_priv.h for details */
+
+/* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include "mt2060.h"
+#include "mt2060_priv.h"
+
+static int debug=0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(args...) do { if (debug) printk(KERN_DEBUG "MT2060: " args); printk("\n"); } while (0)
+
+// Reads a single register
+static int mt2060_readreg(struct mt2060_state *state, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = state->config->i2c_address, .flags = 0, .buf = &reg, .len = 1 },
+ { .addr = state->config->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 },
+ };
+
+ if (i2c_transfer(state->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "mt2060 I2C read failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+// Writes a single register
+static int mt2060_writereg(struct mt2060_state *state, u8 reg, u8 val)
+{
+ u8 buf[2];
+ struct i2c_msg msg = {
+ .addr = state->config->i2c_address, .flags = 0, .buf = buf, .len = 2
+ };
+ buf[0]=reg;
+ buf[1]=val;
+
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2060 I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+// Writes a set of consecutive registers
+static int mt2060_writeregs(struct mt2060_state *state,u8 *buf, u8 len)
+{
+ struct i2c_msg msg = {
+ .addr = state->config->i2c_address, .flags = 0, .buf = buf, .len = len
+ };
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n",(int)len);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+// Initialisation sequences
+// LNABAND=3, NUM1=0x3C, DIV1=0x74, NUM2=0x1080, DIV2=0x49
+static u8 mt2060_config1[] = {
+ REG_LO1C1,
+ 0x3F, 0x74, 0x00, 0x08, 0x93
+};
+
+// FMCG=2, GP2=0, GP1=0
+static u8 mt2060_config2[] = {
+ REG_MISC_CTRL,
+ 0x20, 0x1E, 0x30, 0xff, 0x80, 0xff, 0x00, 0x2c, 0x42
+};
+
+// VGAG=3, V1CSE=1
+static u8 mt2060_config3[] = {
+ REG_VGAG,
+ 0x33
+};
+
+int mt2060_init(struct mt2060_state *state)
+{
+ if (mt2060_writeregs(state,mt2060_config1,sizeof(mt2060_config1)))
+ return -EREMOTEIO;
+ if (mt2060_writeregs(state,mt2060_config3,sizeof(mt2060_config3)))
+ return -EREMOTEIO;
+ return 0;
+}
+EXPORT_SYMBOL(mt2060_init);
+
+#ifdef MT2060_SPURCHECK
+/* The function below calculates the frequency offset between the output frequency if2
+ and the closer cross modulation subcarrier between lo1 and lo2 up to the tenth harmonic */
+static int mt2060_spurcalc(u32 lo1,u32 lo2,u32 if2)
+{
+ int I,J;
+ int dia,diamin,diff;
+ diamin=1000000;
+ for (I = 1; I < 10; I++) {
+ J = ((2*I*lo1)/lo2+1)/2;
+ diff = I*(int)lo1-J*(int)lo2;
+ if (diff < 0) diff=-diff;
+ dia = (diff-(int)if2);
+ if (dia < 0) dia=-dia;
+ if (diamin > dia) diamin=dia;
+ }
+ return diamin;
+}
+
+#define BANDWIDTH 4000 // kHz
+
+/* Calculates the frequency offset to add to avoid spurs. Returns 0 if no offset is needed */
+static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2)
+{
+ u32 Spur,Sp1,Sp2;
+ int I,J;
+ I=0;
+ J=1000;
+
+ Spur=mt2060_spurcalc(lo1,lo2,if2);
+ if (Spur < BANDWIDTH) {
+ /* Potential spurs detected */
+ dprintk("Spurs before : f_lo1: %d f_lo2: %d (kHz)",
+ (int)lo1,(int)lo2);
+ I=1000;
+ Sp1 = mt2060_spurcalc(lo1+I,lo2+I,if2);
+ Sp2 = mt2060_spurcalc(lo1-I,lo2-I,if2);
+
+ if (Sp1 < Sp2) {
+ J=-J; I=-I; Spur=Sp2;
+ } else
+ Spur=Sp1;
+
+ while (Spur < BANDWIDTH) {
+ I += J;
+ Spur = mt2060_spurcalc(lo1+I,lo2+I,if2);
+ }
+ dprintk("Spurs after : f_lo1: %d f_lo2: %d (kHz)",
+ (int)(lo1+I),(int)(lo2+I));
+ }
+ return I;
+}
+#endif
+
+#define IF2 36150 // IF2 frequency = 36.150 MHz
+#define FREF 16000 // Quartz oscillator 16 MHz
+
+int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep)
+{
+ int ret=0;
+ int i=0;
+ u32 freq;
+ u8 lnaband;
+ u32 f_lo1,f_lo2;
+ u32 div1,num1,div2,num2;
+ u8 b[8];
+ u32 if1;
+
+ if1 = state->if1_freq;
+ b[0] = REG_LO1B1;
+ b[1] = 0xFF;
+ mt2060_writeregs(state,b,2);
+
+ freq = fep->frequency / 1000; // Hz -> kHz
+
+ f_lo1 = freq + if1 * 1000;
+ f_lo1 = (f_lo1/250)*250;
+ f_lo2 = f_lo1 - freq - IF2;
+ f_lo2 = (f_lo2/50)*50;
+
+#ifdef MT2060_SPURCHECK
+ // LO-related spurs detection and correction
+ num1 = mt2060_spurcheck(f_lo1,f_lo2,IF2);
+ f_lo1 += num1;
+ f_lo2 += num1;
+#endif
+ //Frequency LO1 = 16MHz * (DIV1 + NUM1/64 )
+ div1 = f_lo1 / FREF;
+ num1 = (64 * (f_lo1 % FREF) )/FREF;
+
+ // Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 )
+ div2 = f_lo2 / FREF;
+ num2 = (16384 * (f_lo2 % FREF) /FREF +1)/2;
+
+ if (freq <= 95000) lnaband = 0xB0; else
+ if (freq <= 180000) lnaband = 0xA0; else
+ if (freq <= 260000) lnaband = 0x90; else
+ if (freq <= 335000) lnaband = 0x80; else
+ if (freq <= 425000) lnaband = 0x70; else
+ if (freq <= 480000) lnaband = 0x60; else
+ if (freq <= 570000) lnaband = 0x50; else
+ if (freq <= 645000) lnaband = 0x40; else
+ if (freq <= 730000) lnaband = 0x30; else
+ if (freq <= 810000) lnaband = 0x20; else lnaband = 0x10;
+
+ b[0] = REG_LO1C1;
+ b[1] = lnaband | ((num1 >>2) & 0x0F);
+ b[2] = div1;
+ b[3] = (num2 & 0x0F) | ((num1 & 3) << 4);
+ b[4] = num2 >> 4;
+ b[5] = ((num2 >>12) & 1) | (div2 << 1);
+
+ dprintk("IF1: %dMHz",(int)if1);
+ dprintk("PLL freq: %d f_lo1: %d f_lo2: %d (kHz)",(int)freq,(int)f_lo1,(int)f_lo2);
+ dprintk("PLL div1: %d num1: %d div2: %d num2: %d",(int)div1,(int)num1,(int)div2,(int)num2);
+ dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]);
+
+ mt2060_writeregs(state,b,6);
+
+ //Waits for pll lock or timeout
+ i=0;
+ do {
+ mt2060_readreg(state,REG_LO_STATUS,b);
+ if ((b[0] & 0x88)==0x88) break;
+ msleep(4);
+ i++;
+ } while (i<10);
+
+ return ret;
+}
+EXPORT_SYMBOL(mt2060_set);
+
+/* from usbsnoop.log */
+static void mt2060_calibrate(struct mt2060_state *state)
+{
+ u8 b = 0;
+ int i = 0;
+
+ if (mt2060_writeregs(state,mt2060_config1,sizeof(mt2060_config1)))
+ return;
+ if (mt2060_writeregs(state,mt2060_config2,sizeof(mt2060_config2)))
+ return;
+
+ do {
+ b |= (1 << 6); // FM1SS;
+ mt2060_writereg(state, REG_LO2C1,b);
+ msleep(20);
+
+ if (i == 0) {
+ b |= (1 << 7); // FM1CA;
+ mt2060_writereg(state, REG_LO2C1,b);
+ b &= ~(1 << 7); // FM1CA;
+ msleep(20);
+ }
+
+ b &= ~(1 << 6); // FM1SS
+ mt2060_writereg(state, REG_LO2C1,b);
+
+ msleep(20);
+ i++;
+ } while (i < 9);
+
+ i = 0;
+ while (i++ < 10 && mt2060_readreg(state, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
+ msleep(20);
+
+ if (i < 10) {
+ mt2060_readreg(state, REG_FM_FREQ, &state->fmfreq); // now find out, what is fmreq used for :)
+ dprintk("calibration was successful: %d",state->fmfreq);
+ } else
+ dprintk("FMCAL timed out");
+}
+
+/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
+int mt2060_attach(struct mt2060_state *state, struct mt2060_config *config, struct i2c_adapter *i2c,u16 if1)
+{
+ u8 id = 0;
+ memset(state,0,sizeof(struct mt2060_state));
+
+ state->config = config;
+ state->i2c = i2c;
+ state->if1_freq = if1;
+
+ if (mt2060_readreg(state,REG_PART_REV,&id) != 0)
+ return -ENODEV;
+
+ if (id != PART_REV)
+ return -ENODEV;
+
+ printk(KERN_INFO "MT2060: successfully identified\n");
+
+ mt2060_calibrate(state);
+
+ return 0;
+}
+EXPORT_SYMBOL(mt2060_attach);
+
+MODULE_AUTHOR("Olivier DANET");
+MODULE_DESCRIPTION("Microtune MT2060 silicon tuner driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/dvb/frontends/mt2060.h
new file mode 100644
index 00000000000..d5dae102f96
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2060.h
@@ -0,0 +1,44 @@
+/*
+ * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
+ *
+ * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef MT2060_H
+#define MT2060_H
+
+#include <linux/i2c.h>
+#include <linux/dvb/frontend.h>
+
+struct mt2060_config {
+ u8 i2c_address;
+ /* Shall we add settings for the discrete outputs ? */
+};
+
+struct mt2060_state {
+ struct mt2060_config *config;
+ struct i2c_adapter *i2c;
+ u16 if1_freq;
+ u8 fmfreq;
+};
+
+extern int mt2060_init(struct mt2060_state *state);
+extern int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep);
+extern int mt2060_attach(struct mt2060_state *state, struct mt2060_config *config, struct i2c_adapter *i2c,u16 if1);
+
+#endif
diff --git a/drivers/media/dvb/frontends/mt2060_priv.h b/drivers/media/dvb/frontends/mt2060_priv.h
new file mode 100644
index 00000000000..47e691e44b7
--- /dev/null
+++ b/drivers/media/dvb/frontends/mt2060_priv.h
@@ -0,0 +1,95 @@
+/*
+ * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
+ *
+ * Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef MT2060_PRIV_H
+#define MT2060_PRIV_H
+
+// Uncomment the #define below to enable spurs checking. The results where quite unconvincing.
+// #define MT2060_SPURCHECK
+
+/* This driver is based on the information available in the datasheet of the
+ "Comtech SDVBT-3K6M" tuner ( K1000737843.pdf ) which features the MT2060 register map :
+
+ I2C Address : 0x60
+
+ Reg.No | B7 | B6 | B5 | B4 | B3 | B2 | B1 | B0 | ( defaults )
+ --------------------------------------------------------------------------------
+ 00 | [ PART ] | [ REV ] | R = 0x63
+ 01 | [ LNABAND ] | [ NUM1(5:2) ] | RW = 0x3F
+ 02 | [ DIV1 ] | RW = 0x74
+ 03 | FM1CA | FM1SS | [ NUM1(1:0) ] | [ NUM2(3:0) ] | RW = 0x00
+ 04 | NUM2(11:4) ] | RW = 0x08
+ 05 | [ DIV2 ] |NUM2(12)| RW = 0x93
+ 06 | L1LK | [ TAD1 ] | L2LK | [ TAD2 ] | R
+ 07 | [ FMF ] | R
+ 08 | ? | FMCAL | ? | ? | ? | ? | ? | TEMP | R
+ 09 | 0 | 0 | [ FMGC ] | 0 | GP02 | GP01 | 0 | RW = 0x20
+ 0A | ??
+ 0B | 0 | 0 | 1 | 1 | 0 | 0 | [ VGAG ] | RW = 0x30
+ 0C | V1CSE | 1 | 1 | 1 | 1 | 1 | 1 | 1 | RW = 0xFF
+ 0D | 1 | 0 | [ V1CS ] | RW = 0xB0
+ 0E | ??
+ 0F | ??
+ 10 | ??
+ 11 | [ LOTO ] | 0 | 0 | 1 | 0 | RW = 0x42
+
+ PART : Part code : 6 for MT2060
+ REV : Revision code : 3 for current revision
+ LNABAND : Input frequency range : ( See code for details )
+ NUM1 / DIV1 / NUM2 / DIV2 : Frequencies programming ( See code for details )
+ FM1CA : Calibration Start Bit
+ FM1SS : Calibration Single Step bit
+ L1LK : LO1 Lock Detect
+ TAD1 : Tune Line ADC ( ? )
+ L2LK : LO2 Lock Detect
+ TAD2 : Tune Line ADC ( ? )
+ FMF : Estimated first IF Center frequency Offset ( ? )
+ FM1CAL : Calibration done bit
+ TEMP : On chip temperature sensor
+ FMCG : Mixer 1 Cap Gain ( ? )
+ GP01 / GP02 : Programmable digital outputs. Unconnected pins ?
+ V1CSE : LO1 VCO Automatic Capacitor Select Enable ( ? )
+ V1CS : LO1 Capacitor Selection Value ( ? )
+ LOTO : LO Timeout ( ? )
+ VGAG : Tuner Output gain
+*/
+
+#define I2C_ADDRESS 0x60
+
+#define REG_PART_REV 0
+#define REG_LO1C1 1
+#define REG_LO1C2 2
+#define REG_LO2C1 3
+#define REG_LO2C2 4
+#define REG_LO2C3 5
+#define REG_LO_STATUS 6
+#define REG_FM_FREQ 7
+#define REG_MISC_STAT 8
+#define REG_MISC_CTRL 9
+#define REG_RESERVED_A 0x0A
+#define REG_VGAG 0x0B
+#define REG_LO1B1 0x0C
+#define REG_LO1B2 0x0D
+#define REG_LOTO 0x11
+
+#define PART_REV 0x63 // The current driver works only with PART=6 and REV=3 chips
+
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 05:06:55 +0000