diff options
44 files changed, 3641 insertions, 2459 deletions
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index 1247a25f109..9e1fe2e0478 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -1274,6 +1274,7 @@ module_param_array(irq, int, NULL, 0); module_param_array(io, int, NULL, 0); MODULE_PARM_DESC(io, "EtherLink/MC I/O base address(es)"); MODULE_PARM_DESC(irq, "EtherLink/MC IRQ number(s)"); +MODULE_LICENSE("GPL"); int init_module(void) { diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 47e158fa5aa..2b55687f6ee 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1320,7 +1320,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || ARCH_IXDP2X01) + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 3fe8ba992c3..f1bd45e3da3 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1285,6 +1285,9 @@ static int b44_open(struct net_device *dev) b44_init_hw(bp); bp->flags |= B44_FLAG_INIT_COMPLETE; + netif_carrier_off(dev); + b44_check_phy(bp); + spin_unlock_irq(&bp->lock); init_timer(&bp->timer); diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 25e4495de79..b96d6fb1929 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -174,6 +174,13 @@ static unsigned int cs8900_irq_map[] = {1,0,0,0}; #include <asm/irq.h> static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; +#elif defined(CONFIG_ARCH_PNX0105) +#include <asm/irq.h> +#include <asm/arch/gpio.h> +#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ +#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ +static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; +static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; #else static unsigned int netcard_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -431,6 +438,30 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) #endif } +#ifdef CONFIG_ARCH_PNX0105 + initialize_ebi(); + + /* Map GPIO registers for the pins connected to the CS8900a. */ + if (map_cirrus_gpio() < 0) + return -ENODEV; + + reset_cirrus(); + + /* Map event-router registers. */ + if (map_event_router() < 0) + return -ENODEV; + + enable_cirrus_irq(); + + unmap_cirrus_gpio(); + unmap_event_router(); + + dev->base_addr = ioaddr; + + for (i = 0 ; i < 3 ; i++) + readreg(dev, 0); +#endif + /* Grab the region so we can find another board if autoIRQ fails. */ /* WTF is going on here? */ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { @@ -672,7 +703,7 @@ printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT)); } else { i = lp->isa_config & INT_NO_MASK; if (lp->chip_type == CS8900) { -#ifdef CONFIG_ARCH_IXDP2X01 +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -1145,7 +1176,7 @@ net_open(struct net_device *dev) int i; int ret; -#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this won't work */ +#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX0105) /* uses irq#1, so this won't work */ if (dev->irq < 2) { /* Allow interrupts to be generated by the chip */ /* Cirrus' release had this: */ @@ -1176,7 +1207,7 @@ net_open(struct net_device *dev) else #endif { -#ifndef CONFIG_ARCH_IXDP2X01 +#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); @@ -1261,6 +1292,9 @@ net_open(struct net_device *dev) case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break; default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2); } +#ifdef CONFIG_ARCH_PNX0105 + result = A_CNF_10B_T; +#endif if (!result) { printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); release_irq: diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h index b0ef7ad2baa..bd3ad8e6cce 100644 --- a/drivers/net/cs89x0.h +++ b/drivers/net/cs89x0.h @@ -16,7 +16,7 @@ #include <linux/config.h> -#ifdef CONFIG_ARCH_IXDP2X01 +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ #define CS89x0_PORT(reg) ((reg) * 2) #else diff --git a/drivers/net/e100.c b/drivers/net/e100.c index cfaa6b2bf34..1e56c8eea35 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1093,11 +1093,16 @@ static int e100_phy_init(struct nic *nic) } if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && - (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && - (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) - /* enable/disable MDI/MDI-X auto-switching */ - mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, - nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH); + (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000))) { + /* enable/disable MDI/MDI-X auto-switching. + MDI/MDI-X auto-switching is disabled for 82551ER/QM chips */ + if((nic->mac == mac_82551_E) || (nic->mac == mac_82551_F) || + (nic->mac == mac_82551_10) || (nic->mii.force_media) || + !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled)) + mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 0); + else + mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, NCONFIG_AUTO_SWITCH); + } return 0; } @@ -1666,8 +1671,10 @@ static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs) if(stat_ack & stat_ack_rnr) nic->ru_running = RU_SUSPENDED; - e100_disable_irq(nic); - netif_rx_schedule(netdev); + if(likely(netif_rx_schedule_prep(netdev))) { + e100_disable_irq(nic); + __netif_rx_schedule(netdev); + } return IRQ_HANDLED; } @@ -2335,11 +2342,11 @@ static int __devinit e100_probe(struct pci_dev *pdev, goto err_out_iounmap; } - e100_phy_init(nic); - if((err = e100_eeprom_load(nic))) goto err_out_free; + e100_phy_init(nic); + memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); if(!is_valid_ether_addr(netdev->dev_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC address from " diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index af1e82c5b80..092757bc721 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -140,7 +140,7 @@ struct e1000_adapter; #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ #define AUTO_ALL_MODES 0 -#define E1000_EEPROM_82544_APM 0x0400 +#define E1000_EEPROM_82544_APM 0x0004 #define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE @@ -159,7 +159,7 @@ struct e1000_adapter; * so a DMA handle can be stored along with the buffer */ struct e1000_buffer { struct sk_buff *skb; - uint64_t dma; + dma_addr_t dma; unsigned long time_stamp; uint16_t length; uint16_t next_to_watch; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 237247f74df..f133ff0b0b9 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -105,7 +105,7 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { static int e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; if(hw->media_type == e1000_media_type_copper) { @@ -141,9 +141,9 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) SUPPORTED_FIBRE | SUPPORTED_Autoneg); - ecmd->advertising = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg); + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); ecmd->port = PORT_FIBRE; @@ -179,13 +179,24 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) static int e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; if(ecmd->autoneg == AUTONEG_ENABLE) { hw->autoneg = 1; - hw->autoneg_advertised = 0x002F; - ecmd->advertising = 0x002F; + if(hw->media_type == e1000_media_type_fiber) + hw->autoneg_advertised = ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + else + hw->autoneg_advertised = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full| + ADVERTISED_Autoneg | + ADVERTISED_TP; + ecmd->advertising = hw->autoneg_advertised; } else if(e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) return -EINVAL; @@ -206,7 +217,7 @@ static void e1000_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; pause->autoneg = @@ -226,7 +237,7 @@ static int e1000_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; adapter->fc_autoneg = pause->autoneg; @@ -259,14 +270,14 @@ e1000_set_pauseparam(struct net_device *netdev, static uint32_t e1000_get_rx_csum(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); return adapter->rx_csum; } static int e1000_set_rx_csum(struct net_device *netdev, uint32_t data) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); adapter->rx_csum = data; if(netif_running(netdev)) { @@ -286,7 +297,7 @@ e1000_get_tx_csum(struct net_device *netdev) static int e1000_set_tx_csum(struct net_device *netdev, uint32_t data) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); if(adapter->hw.mac_type < e1000_82543) { if (!data) @@ -306,8 +317,8 @@ e1000_set_tx_csum(struct net_device *netdev, uint32_t data) static int e1000_set_tso(struct net_device *netdev, uint32_t data) { - struct e1000_adapter *adapter = netdev->priv; - if ((adapter->hw.mac_type < e1000_82544) || + struct e1000_adapter *adapter = netdev_priv(netdev); + if((adapter->hw.mac_type < e1000_82544) || (adapter->hw.mac_type == e1000_82547)) return data ? -EINVAL : 0; @@ -322,14 +333,14 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) static uint32_t e1000_get_msglevel(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); return adapter->msg_enable; } static void e1000_set_msglevel(struct net_device *netdev, uint32_t data) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); adapter->msg_enable = data; } @@ -344,7 +355,7 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t *regs_buff = p; uint16_t phy_data; @@ -432,7 +443,7 @@ e1000_get_regs(struct net_device *netdev, static int e1000_get_eeprom_len(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); return adapter->hw.eeprom.word_size * 2; } @@ -440,7 +451,7 @@ static int e1000_get_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom, uint8_t *bytes) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint16_t *eeprom_buff; int first_word, last_word; @@ -486,7 +497,7 @@ static int e1000_set_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom, uint8_t *bytes) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint16_t *eeprom_buff; void *ptr; @@ -547,7 +558,7 @@ static void e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); @@ -563,7 +574,7 @@ static void e1000_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; struct e1000_desc_ring *txdr = &adapter->tx_ring; struct e1000_desc_ring *rxdr = &adapter->rx_ring; @@ -584,7 +595,7 @@ static int e1000_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; struct e1000_desc_ring *txdr = &adapter->tx_ring; struct e1000_desc_ring *rxdr = &adapter->rx_ring; @@ -651,6 +662,9 @@ err_setup_rx: E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \ value = E1000_READ_REG(&adapter->hw, R); \ if(value != (test[pat] & W & M)) { \ + DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \ + "0x%08X expected 0x%08X\n", \ + E1000_##R, value, (test[pat] & W & M)); \ *data = (adapter->hw.mac_type < e1000_82543) ? \ E1000_82542_##R : E1000_##R; \ return 1; \ @@ -663,7 +677,9 @@ err_setup_rx: uint32_t value; \ E1000_WRITE_REG(&adapter->hw, R, W & M); \ value = E1000_READ_REG(&adapter->hw, R); \ - if ((W & M) != (value & M)) { \ + if((W & M) != (value & M)) { \ + DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\ + "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \ *data = (adapter->hw.mac_type < e1000_82543) ? \ E1000_82542_##R : E1000_##R; \ return 1; \ @@ -673,18 +689,33 @@ err_setup_rx: static int e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) { - uint32_t value; - uint32_t i; + uint32_t value, before, after; + uint32_t i, toggle; /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - value = (E1000_READ_REG(&adapter->hw, STATUS) & (0xFFFFF833)); - E1000_WRITE_REG(&adapter->hw, STATUS, (0xFFFFFFFF)); - if(value != (E1000_READ_REG(&adapter->hw, STATUS) & (0xFFFFF833))) { + switch (adapter->hw.mac_type) { + case e1000_82573: + toggle = 0x7FFFF033; + break; + default: + toggle = 0xFFFFF833; + break; + } + + before = E1000_READ_REG(&adapter->hw, STATUS); + value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle); + E1000_WRITE_REG(&adapter->hw, STATUS, toggle); + after = E1000_READ_REG(&adapter->hw, STATUS) & toggle; + if(value != after) { + DPRINTK(DRV, ERR, "failed STATUS register test got: " + "0x%08X expected: 0x%08X\n", after, value); *data = 1; return 1; } + /* restore previous status */ + E1000_WRITE_REG(&adapter->hw, STATUS, before); REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); @@ -766,7 +797,7 @@ e1000_test_intr(int irq, struct pt_regs *regs) { struct net_device *netdev = (struct net_device *) data; - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); adapter->test_icr |= E1000_READ_REG(&adapter->hw, ICR); @@ -1214,6 +1245,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: + case e1000_82573: return e1000_integrated_phy_loopback(adapter); break; @@ -1422,7 +1454,7 @@ static void e1000_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, uint64_t *data) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); boolean_t if_running = netif_running(netdev); if(eth_test->flags == ETH_TEST_FL_OFFLINE) { @@ -1482,7 +1514,7 @@ e1000_diag_test(struct net_device *netdev, static void e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; switch(adapter->hw.device_id) { @@ -1527,7 +1559,7 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; switch(adapter->hw.device_id) { @@ -1588,22 +1620,31 @@ e1000_led_blink_callback(unsigned long data) static int e1000_phys_id(struct net_device *netdev, uint32_t data) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); - if(!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = e1000_led_blink_callback; - adapter->blink_timer.data = (unsigned long) adapter; + if(adapter->hw.mac_type < e1000_82573) { + if(!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long) adapter; + } + e1000_setup_led(&adapter->hw); + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); + } + else { + E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT))); + msleep_interruptible(data * 1000); } - e1000_setup_led(&adapter->hw); - mod_timer(&adapter->blink_timer, jiffies); - - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); e1000_led_off(&adapter->hw); clear_bit(E1000_LED_ON, &adapter->led_status); e1000_cleanup_led(&adapter->hw); @@ -1614,7 +1655,7 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) static int e1000_nway_reset(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); if(netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); @@ -1632,7 +1673,7 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, uint64_t *data) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); int i; e1000_update_stats(adapter); diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 723589b28be..045f5426ab9 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -354,18 +354,27 @@ e1000_set_media_type(struct e1000_hw *hw) hw->media_type = e1000_media_type_internal_serdes; break; default: - if(hw->mac_type >= e1000_82543) { + switch (hw->mac_type) { + case e1000_82542_rev2_0: + case e1000_82542_rev2_1: + hw->media_type = e1000_media_type_fiber; + break; + case e1000_82573: + /* The STATUS_TBIMODE bit is reserved or reused for the this + * device. + */ + hw->media_type = e1000_media_type_copper; + break; + default: status = E1000_READ_REG(hw, STATUS); - if(status & E1000_STATUS_TBIMODE) { + if (status & E1000_STATUS_TBIMODE) { hw->media_type = e1000_media_type_fiber; /* tbi_compatibility not valid on fiber */ hw->tbi_compatibility_en = FALSE; } else { hw->media_type = e1000_media_type_copper; } - } else { - /* This is an 82542 (fiber only) */ - hw->media_type = e1000_media_type_fiber; + break; } } } @@ -1189,9 +1198,9 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); if(ret_val) return ret_val; - } + } - return E1000_SUCCESS; + return E1000_SUCCESS; } diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a0263ee96c6..93e9f878875 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -66,6 +66,7 @@ typedef enum { e1000_eeprom_spi, e1000_eeprom_microwire, e1000_eeprom_flash, + e1000_eeprom_none, /* No NVM support */ e1000_num_eeprom_types } e1000_eeprom_type; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 137226d98d4..cb7f051a60a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -29,6 +29,8 @@ #include "e1000.h" /* Change Log + * 6.0.58 4/20/05 + * o Accepted ethtool cleanup patch from Stephen Hemminger * 6.0.44+ 2/15/05 * o applied Anton's patch to resolve tx hang in hardware * o Applied Andrew Mortons patch - e1000 stops working after resume @@ -41,9 +43,9 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "6.0.54-k2"DRIVERNAPI +#define DRV_VERSION "6.0.60-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; -char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation."; +char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; /* e1000_pci_tbl - PCI Device ID Table * @@ -517,7 +519,7 @@ e1000_probe(struct pci_dev *pdev, SET_NETDEV_DEV(netdev, &pdev->dev); pci_set_drvdata(pdev, netdev); - adapter = netdev->priv; + adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; adapter->hw.back = adapter; @@ -738,7 +740,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t manc, swsm; flush_scheduled_work(); @@ -871,7 +873,7 @@ e1000_sw_init(struct e1000_adapter *adapter) static int e1000_open(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); int err; /* allocate transmit descriptors */ @@ -919,7 +921,7 @@ err_setup_tx: static int e1000_close(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); e1000_down(adapter); @@ -1599,7 +1601,7 @@ e1000_leave_82542_rst(struct e1000_adapter *adapter) static int e1000_set_mac(struct net_device *netdev, void *p) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct sockaddr *addr = p; if(!is_valid_ether_addr(addr->sa_data)) @@ -1634,7 +1636,7 @@ e1000_set_mac(struct net_device *netdev, void *p) static void e1000_set_multi(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; unsigned long flags; @@ -2213,7 +2215,7 @@ e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD; unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; @@ -2344,7 +2346,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) static void e1000_tx_timeout(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); /* Do the reset outside of interrupt context */ schedule_work(&adapter->tx_timeout_task); @@ -2353,7 +2355,7 @@ e1000_tx_timeout(struct net_device *netdev) static void e1000_tx_timeout_task(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); e1000_down(adapter); e1000_up(adapter); @@ -2370,7 +2372,7 @@ e1000_tx_timeout_task(struct net_device *netdev) static struct net_device_stats * e1000_get_stats(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); e1000_update_stats(adapter); return &adapter->net_stats; @@ -2387,7 +2389,7 @@ e1000_get_stats(struct net_device *netdev) static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || @@ -2598,7 +2600,7 @@ static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs) { struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); #ifndef CONFIG_E1000_NAPI @@ -2661,7 +2663,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) static int e1000_clean(struct net_device *netdev, int *budget) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); int work_to_do = min(*budget, netdev->quota); int tx_cleaned; int work_done = 0; @@ -2672,8 +2674,8 @@ e1000_clean(struct net_device *netdev, int *budget) *budget -= work_done; netdev->quota -= work_done; - /* If no Tx and no Rx work done, exit the polling mode */ if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { + /* If no Tx and not enough Rx work done, exit the polling mode */ netif_rx_complete(netdev); e1000_irq_enable(adapter); return 0; @@ -2769,13 +2771,13 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) i = tx_ring->next_to_clean; eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); - DPRINTK(TX_ERR, ERR, "Detected Tx Unit Hang\n" + DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n" " TDH <%x>\n" " TDT <%x>\n" " next_to_use <%x>\n" " next_to_clean <%x>\n" "buffer_info[next_to_clean]\n" - " dma <%llx>\n" + " dma <%zx>\n" " time_stamp <%lx>\n" " next_to_watch <%x>\n" " jiffies <%lx>\n" @@ -2994,7 +2996,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); - staterr = rx_desc->wb.middle.status_error; + staterr = le32_to_cpu(rx_desc->wb.middle.status_error); while(staterr & E1000_RXD_STAT_DD) { buffer_info = &rx_ring->buffer_info[i]; @@ -3065,16 +3067,16 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) #ifdef CONFIG_E1000_NAPI if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->wb.middle.vlan & - E1000_RXD_SPC_VLAN_MASK)); + le16_to_cpu(rx_desc->wb.middle.vlan) & + E1000_RXD_SPC_VLAN_MASK); } else { netif_receive_skb(skb); } #else /* CONFIG_E1000_NAPI */ if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { vlan_hwaccel_rx(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->wb.middle.vlan & - E1000_RXD_SPC_VLAN_MASK)); + le16_to_cpu(rx_desc->wb.middle.vlan) & + E1000_RXD_SPC_VLAN_MASK); } else { netif_rx(skb); } @@ -3087,7 +3089,7 @@ next_desc: if(unlikely(++i == rx_ring->count)) i = 0; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); - staterr = rx_desc->wb.middle.status_error; + staterr = le32_to_cpu(rx_desc->wb.middle.status_error); } rx_ring->next_to_clean = i; adapter->alloc_rx_buf(adapter); @@ -3371,11 +3373,12 @@ e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(ifr); int retval; uint16_t mii_reg; uint16_t spddplx; + unsigned long flags; if(adapter->hw.media_type != e1000_media_type_copper) return -EOPNOTSUPP; @@ -3385,22 +3388,29 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) data->phy_id = adapter->hw.phy_addr; break; case SIOCGMIIREG: - if (!capable(CAP_NET_ADMIN)) + if(!capable(CAP_NET_ADMIN)) return -EPERM; - if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, - &data->val_out)) + spin_lock_irqsave(&adapter->stats_lock, flags); + if(e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, + &data->val_out)) { + spin_unlock_irqrestore(&adapter->stats_lock, flags); return -EIO; + } + spin_unlock_irqrestore(&adapter->stats_lock, flags); break; case SIOCSMIIREG: - if (!capable(CAP_NET_ADMIN)) + if(!capable(CAP_NET_ADMIN)) return -EPERM; - if (data->reg_num & ~(0x1F)) + if(data->reg_num & ~(0x1F)) return -EFAULT; mii_reg = data->val_in; - if (e1000_write_phy_reg(&adapter->hw, data->reg_num, - mii_reg)) + spin_lock_irqsave(&adapter->stats_lock, flags); + if(e1000_write_phy_reg(&adapter->hw, data->reg_num, + mii_reg)) { + spin_unlock_irqrestore(&adapter->stats_lock, flags); return -EIO; - if (adapter->hw.phy_type == e1000_phy_m88) { + } + if(adapter->hw.phy_type == e1000_phy_m88) { switch (data->reg_num) { case PHY_CTRL: if(mii_reg & MII_CR_POWER_DOWN) @@ -3420,8 +3430,12 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) HALF_DUPLEX; retval = e1000_set_spd_dplx(adapter, spddplx); - if(retval) + if(retval) { + spin_unlock_irqrestore( + &adapter->stats_lock, + flags); return retval; + } } if(netif_running(adapter->netdev)) { e1000_down(adapter); @@ -3431,8 +3445,11 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) break; case M88E1000_PHY_SPEC_CTRL: case M88E1000_EXT_PHY_SPEC_CTRL: - if (e1000_phy_reset(&adapter->hw)) + if(e1000_phy_reset(&adapter->hw)) { + spin_unlock_irqrestore( + &adapter->stats_lock, flags); return -EIO; + } break; } } else { @@ -3448,6 +3465,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) break; } } + spin_unlock_irqrestore(&adapter->stats_lock, flags); break; default: return -EOPNOTSUPP; @@ -3504,7 +3522,7 @@ e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t ctrl, rctl; e1000_irq_disable(adapter); @@ -3544,7 +3562,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t vfta, index; if((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && @@ -3560,7 +3578,7 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t vfta, index; e1000_irq_disable(adapter); @@ -3601,6 +3619,13 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) { adapter->hw.autoneg = 0; + /* Fiber NICs only allow 1000 gbps Full duplex */ + if((adapter->hw.media_type == e1000_media_type_fiber) && + spddplx != (SPEED_1000 + DUPLEX_FULL)) { + DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + } + switch(spddplx) { case SPEED_10 + DUPLEX_HALF: adapter->hw.forced_speed_duplex = e1000_10_half; @@ -3647,7 +3672,7 @@ static int e1000_suspend(struct pci_dev *pdev, uint32_t state) { struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm; uint32_t wufc = adapter->wol; @@ -3740,12 +3765,12 @@ static int e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev->priv; - uint32_t manc, ret, swsm; + struct e1000_adapter *adapter = netdev_priv(netdev); + uint32_t manc, ret_val, swsm; pci_set_power_state(pdev, 0); pci_restore_state(pdev); - ret = pci_enable_device(pdev); + ret_val = pci_enable_device(pdev); pci_set_master(pdev); pci_enable_wake(pdev, 3, 0); @@ -3788,7 +3813,7 @@ e1000_resume(struct pci_dev *pdev) static void e1000_netpoll(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev->priv; + struct e1000_adapter *adapter = netdev_priv(netdev); disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev, NULL); enable_irq(adapter->pdev->irq); diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 4ebcd052e15..64f0f697c95 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -82,6 +82,9 @@ * 0.31: 14 Nov 2004: ethtool support for getting/setting link * capabilities. * 0.32: 16 Apr 2005: RX_ERROR4 handling added. + * 0.33: 16 May 2005: Support for MCP51 added. + * 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics. + * 0.35: 26 Jun 2005: Support for MCP55 added. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -93,7 +96,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.32" +#define FORCEDETH_VERSION "0.35" #define DRV_NAME "forcedeth" #include <linux/module.h> @@ -2005,7 +2008,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i /* handle different descriptor versions */ if (pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_1 || pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_2 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3) + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3 || + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 || + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) np->desc_ver = DESC_VER_1; else np->desc_ver = DESC_VER_2; @@ -2215,56 +2220,84 @@ static struct pci_device_id pci_tbl[] = { .device = PCI_DEVICE_ID_NVIDIA_NVENET_4, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_5, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_6, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_7, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* CK804 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_8, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* CK804 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_9, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* MCP04 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_10, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* MCP04 Ethernet Controller */ .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_NVENET_11, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + }, + { /* MCP51 Ethernet Controller */ + .vendor = PCI_VENDOR_ID_NVIDIA, + .device = PCI_DEVICE_ID_NVIDIA_NVENET_12, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + }, + { /* MCP51 Ethernet Controller */ + .vendor = PCI_VENDOR_ID_NVIDIA, + .device = PCI_DEVICE_ID_NVIDIA_NVENET_13, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + }, + { /* MCP55 Ethernet Controller */ + .vendor = PCI_VENDOR_ID_NVIDIA, + .device = PCI_DEVICE_ID_NVIDIA_NVENET_14, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + }, + { /* MCP55 Ethernet Controller */ + .vendor = PCI_VENDOR_ID_NVIDIA, + .device = PCI_DEVICE_ID_NVIDIA_NVENET_15, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, {0,}, }; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b43b2b11aac..6518334b928 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1,4 +1,4 @@ -/* +/* * drivers/net/gianfar.c * * Gianfar Ethernet Driver @@ -22,10 +22,9 @@ * B-V +1.62 * * Theory of operation - * This driver is designed for the Triple-speed Ethernet - * controllers on the Freescale 8540/8560 integrated processors, - * as well as the Fast Ethernet Controller on the 8540. - * + * This driver is designed for the non-CPM ethernet controllers + * on the 85xx and 83xx family of integrated processors + * * The driver is initialized through platform_device. Structures which * define the configuration needed by the board are defined in a * board structure in arch/ppc/platforms (though I do not @@ -39,12 +38,12 @@ * * The Gianfar Ethernet Controller uses a ring of buffer * descriptors. The beginning is indicated by a register - * pointing to the physical address of the start of the ring. - * The end is determined by a "wrap" bit being set in the + * pointing to the physical address of the start of the ring. + * The end is determined by a "wrap" bit being set in the * last descriptor of the ring. * * When a packet is received, the RXF bit in the - * IEVENT register is set, triggering an interrupt when the + * IEVENT register is set, triggering an interrupt when the * corresponding bit in the IMASK register is also set (if * interrupt coalescing is active, then the interrupt may not * happen immediately, but will wait until either a set number @@ -52,7 +51,7 @@ * interrupt handler will signal there is work to be done, and * exit. Without NAPI, the packet(s) will be handled * immediately. Both methods will start at the last known empty - * descriptor, and process every subsequent descriptor until there + * descriptor, and process every subsequent descriptor until there * are none left with data (NAPI will stop after a set number of * packets to give time to other tasks, but will eventually * process all the packets). The data arrives inside a @@ -83,9 +82,13 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> +#include <linux/if_vlan.h> #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/device.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/udp.h> #include <asm/io.h> #include <asm/irq.h> @@ -123,7 +126,7 @@ static int gfar_set_mac_address(struct net_device *dev); static int gfar_change_mtu(struct net_device *dev, int new_mtu); static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs); -irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs); static void gfar_phy_change(void *data); @@ -139,9 +142,12 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); #ifdef CONFIG_GFAR_NAPI static int gfar_poll(struct net_device *dev, int *budget); #endif -static int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); +int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); static void gfar_phy_startup_timer(unsigned long data); +static void gfar_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp); +static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); extern struct ethtool_ops gfar_ethtool_ops; @@ -149,6 +155,13 @@ MODULE_AUTHOR("Freescale Semiconductor, Inc"); MODULE_DESCRIPTION("Gianfar Ethernet Driver"); MODULE_LICENSE("GPL"); +int gfar_uses_fcb(struct gfar_private *priv) +{ + if (priv->vlan_enable || priv->rx_csum_enable) + return 1; + else + return 0; +} static int gfar_probe(struct device *device) { u32 tempval; @@ -159,7 +172,6 @@ static int gfar_probe(struct device *device) struct resource *r; int idx; int err = 0; - int dev_ethtool_ops = 0; einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; @@ -265,15 +277,69 @@ static int gfar_probe(struct device *device) dev->mtu = 1500; dev->set_multicast_list = gfar_set_multi; - /* Index into the array of possible ethtool - * ops to catch all 4 possibilities */ - if((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) == 0) - dev_ethtool_ops += 1; + dev->ethtool_ops = &gfar_ethtool_ops; + + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) { + priv->rx_csum_enable = 1; + dev->features |= NETIF_F_IP_CSUM; + } else + priv->rx_csum_enable = 0; + + priv->vlgrp = NULL; - if((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE) == 0) - dev_ethtool_ops += 2; + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { + dev->vlan_rx_register = gfar_vlan_rx_register; + dev->vlan_rx_kill_vid = gfar_vlan_rx_kill_vid; - dev->ethtool_ops = gfar_op_array[dev_ethtool_ops]; + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + + priv->vlan_enable = 1; + } + + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { + priv->extended_hash = 1; + priv->hash_width = 9; + + priv->hash_regs[0] = &priv->regs->igaddr0; + priv->hash_regs[1] = &priv->regs->igaddr1; + priv->hash_regs[2] = &priv->regs->igaddr2; + priv->hash_regs[3] = &priv->regs->igaddr3; + priv->hash_regs[4] = &priv->regs->igaddr4; + priv->hash_regs[5] = &priv->regs->igaddr5; + priv->hash_regs[6] = &priv->regs->igaddr6; + priv->hash_regs[7] = &priv->regs->igaddr7; + priv->hash_regs[8] = &priv->regs->gaddr0; + priv->hash_regs[9] = &priv->regs->gaddr1; + priv->hash_regs[10] = &priv->regs->gaddr2; + priv->hash_regs[11] = &priv->regs->gaddr3; + priv->hash_regs[12] = &priv->regs->gaddr4; + priv->hash_regs[13] = &priv->regs->gaddr5; + priv->hash_regs[14] = &priv->regs->gaddr6; + priv->hash_regs[15] = &priv->regs->gaddr7; + + } else { + priv->extended_hash = 0; + priv->hash_width = 8; + + priv->hash_regs[0] = &priv->regs->gaddr0; + priv->hash_regs[1] = &priv->regs->gaddr1; + priv->hash_regs[2] = &priv->regs->gaddr2; + priv->hash_regs[3] = &priv->regs->gaddr3; + priv->hash_regs[4] = &priv->regs->gaddr4; + priv->hash_regs[5] = &priv->regs->gaddr5; + priv->hash_regs[6] = &priv->regs->gaddr6; + priv->hash_regs[7] = &priv->regs->gaddr7; + } + + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING) + priv->padding = DEFAULT_PADDING; + else + priv->padding = 0; + + dev->hard_header_len += priv->padding; + + if (dev->features & NETIF_F_IP_CSUM) + dev->hard_header_len += GMAC_FCB_LEN; priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE; #ifdef CONFIG_GFAR_BUFSTASH @@ -289,6 +355,9 @@ static int gfar_probe(struct device *device) priv->rxcount = DEFAULT_RXCOUNT; priv->rxtime = DEFAULT_RXTIME; + /* Enable most messages by default */ + priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; + err = register_netdev(dev); if (err) { @@ -360,8 +429,9 @@ static int init_phy(struct net_device *dev) GFP_KERNEL); if(NULL == mii_info) { - printk(KERN_ERR "%s: Could not allocate mii_info\n", - dev->name); + if (netif_msg_ifup(priv)) + printk(KERN_ERR "%s: Could not allocate mii_info\n", + dev->name); return -ENOMEM; } @@ -410,7 +480,8 @@ static int init_phy(struct net_device *dev) curphy = get_phy_info(priv->mii_info); if (curphy == NULL) { - printk(KERN_ERR "%s: No PHY found\n", dev->name); + if (netif_msg_ifup(priv)) + printk(KERN_ERR "%s: No PHY found\n", dev->name); err = -1; goto no_phy; } @@ -421,7 +492,7 @@ static int init_phy(struct net_device *dev) if(curphy->init) { err = curphy->init(priv->mii_info); - if (err) + if (err) goto phy_init_fail; } @@ -446,14 +517,14 @@ static void init_registers(struct net_device *dev) gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR); /* Init hash registers to zero */ - gfar_write(&priv->regs->iaddr0, 0); - gfar_write(&priv->regs->iaddr1, 0); - gfar_write(&priv->regs->iaddr2, 0); - gfar_write(&priv->regs->iaddr3, 0); - gfar_write(&priv->regs->iaddr4, 0); - gfar_write(&priv->regs->iaddr5, 0); - gfar_write(&priv->regs->iaddr6, 0); - gfar_write(&priv->regs->iaddr7, 0); + gfar_write(&priv->regs->igaddr0, 0); + gfar_write(&priv->regs->igaddr1, 0); + gfar_write(&priv->regs->igaddr2, 0); + gfar_write(&priv->regs->igaddr3, 0); + gfar_write(&priv->regs->igaddr4, 0); + gfar_write(&priv->regs->igaddr5, 0); + gfar_write(&priv->regs->igaddr6, 0); + gfar_write(&priv->regs->igaddr7, 0); gfar_write(&priv->regs->gaddr0, 0); gfar_write(&priv->regs->gaddr1, 0); @@ -464,9 +535,6 @@ static void init_registers(struct net_device *dev) gfar_write(&priv->regs->gaddr6, 0); gfar_write(&priv->regs->gaddr7, 0); - /* Zero out rctrl */ - gfar_write(&priv->regs->rctrl, 0x00000000); - /* Zero out the rmon mib registers if it has them */ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { memset((void *) &(priv->regs->rmon), 0, @@ -497,20 +565,14 @@ static void init_registers(struct net_device *dev) gfar_write(&priv->regs->tbipa, TBIPA_VALUE); } -void stop_gfar(struct net_device *dev) + +/* Halt the receive and transmit queues */ +void gfar_halt(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); struct gfar *regs = priv->regs; - unsigned long flags; u32 tempval; - /* Lock it down */ - spin_lock_irqsave(&priv->lock, flags); - - /* Tell the kernel the link is down */ - priv->mii_info->link = 0; - adjust_link(dev); - /* Mask all interrupts */ gfar_write(®s->imask, IMASK_INIT_CLEAR); @@ -533,13 +595,29 @@ void stop_gfar(struct net_device *dev) tempval = gfar_read(®s->maccfg1); tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN); gfar_write(®s->maccfg1, tempval); +} + +void stop_gfar(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + struct gfar *regs = priv->regs; + unsigned long flags; + + /* Lock it down */ + spin_lock_irqsave(&priv->lock, flags); + + /* Tell the kernel the link is down */ + priv->mii_info->link = 0; + adjust_link(dev); + + gfar_halt(dev); if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { /* Clear any pending interrupts */ mii_clear_phy_interrupt(priv->mii_info); /* Disable PHY Interrupts */ - mii_configure_phy_interrupt(priv->mii_info, + mii_configure_phy_interrupt(priv->mii_info, MII_INTERRUPT_DISABLED); } @@ -566,7 +644,7 @@ void stop_gfar(struct net_device *dev) sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, - gfar_read(®s->tbase)); + gfar_read(®s->tbase0)); } /* If there are any tx skbs or rx skbs still around, free them. @@ -620,6 +698,34 @@ void free_skb_resources(struct gfar_private *priv) } } +void gfar_start(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + struct gfar *regs = priv->regs; + u32 tempval; + + /* Enable Rx and Tx in MACCFG1 */ + tempval = gfar_read(®s->maccfg1); + tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN); + gfar_write(®s->maccfg1, tempval); + + /* Initialize DMACTRL to have WWR and WOP */ + tempval = gfar_read(&priv->regs->dmactrl); + tempval |= DMACTRL_INIT_SETTINGS; + gfar_write(&priv->regs->dmactrl, tempval); + + /* Clear THLT, so that the DMA starts polling now */ + gfar_write(®s->tstat, TSTAT_CLEAR_THALT); + + /* Make sure we aren't stopped */ + tempval = gfar_read(&priv->regs->dmactrl); + tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); + gfar_write(&priv->regs->dmactrl, tempval); + + /* Unmask the interrupts we look for */ + gfar_write(®s->imask, IMASK_DEFAULT); +} + /* Bring the controller up and running */ int startup_gfar(struct net_device *dev) { @@ -630,33 +736,34 @@ int startup_gfar(struct net_device *dev) int i; struct gfar_private *priv = netdev_priv(dev); struct gfar *regs = priv->regs; - u32 tempval; int err = 0; + u32 rctrl = 0; gfar_write(®s->imask, IMASK_INIT_CLEAR); /* Allocate memory for the buffer descriptors */ - vaddr = (unsigned long) dma_alloc_coherent(NULL, + vaddr = (unsigned long) dma_alloc_coherent(NULL, sizeof (struct txbd8) * priv->tx_ring_size + sizeof (struct rxbd8) * priv->rx_ring_size, &addr, GFP_KERNEL); if (vaddr == 0) { - printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n", - dev->name); + if (netif_msg_ifup(priv)) + printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n", + dev->name); return -ENOMEM; } priv->tx_bd_base = (struct txbd8 *) vaddr; /* enet DMA only understands physical addresses */ - gfar_write(®s->tbase, addr); + gfar_write(®s->tbase0, addr); /* Start the rx descriptor ring where the tx ring leaves off */ addr = addr + sizeof (struct txbd8) * priv->tx_ring_size; vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size; priv->rx_bd_base = (struct rxbd8 *) vaddr; - gfar_write(®s->rbase, addr); + gfar_write(®s->rbase0, addr); /* Setup the skbuff rings */ priv->tx_skbuff = @@ -664,8 +771,9 @@ int startup_gfar(struct net_device *dev) priv->tx_ring_size, GFP_KERNEL); if (priv->tx_skbuff == NULL) { - printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", - dev->name); + if (netif_msg_ifup(priv)) + printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", + dev->name); err = -ENOMEM; goto tx_skb_fail; } @@ -678,8 +786,9 @@ int startup_gfar(struct net_device *dev) priv->rx_ring_size, GFP_KERNEL); if (priv->rx_skbuff == NULL) { - printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", - dev->name); + if (netif_msg_ifup(priv)) + printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", + dev->name); err = -ENOMEM; goto rx_skb_fail; } @@ -726,12 +835,13 @@ int startup_gfar(struct net_device *dev) /* If the device has multiple interrupts, register for * them. Otherwise, only register for the one */ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { - /* Install our interrupt handlers for Error, + /* Install our interrupt handlers for Error, * Transmit, and Receive */ if (request_irq(priv->interruptError, gfar_error, 0, "enet_error", dev) < 0) { - printk(KERN_ERR "%s: Can't get IRQ %d\n", - dev->name, priv->interruptError); + if (netif_msg_intr(priv)) + printk(KERN_ERR "%s: Can't get IRQ %d\n", + dev->name, priv->interruptError); err = -1; goto err_irq_fail; @@ -739,8 +849,9 @@ int startup_gfar(struct net_device *dev) if (request_irq(priv->interruptTransmit, gfar_transmit, 0, "enet_tx", dev) < 0) { - printk(KERN_ERR "%s: Can't get IRQ %d\n", - dev->name, priv->interruptTransmit); + if (netif_msg_intr(priv)) + printk(KERN_ERR "%s: Can't get IRQ %d\n", + dev->name, priv->interruptTransmit); err = -1; @@ -749,8 +860,9 @@ int startup_gfar(struct net_device *dev) if (request_irq(priv->interruptReceive, gfar_receive, 0, "enet_rx", dev) < 0) { - printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n", - dev->name, priv->interruptReceive); + if (netif_msg_intr(priv)) + printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n", + dev->name, priv->interruptReceive); err = -1; goto rx_irq_fail; @@ -758,8 +870,9 @@ int startup_gfar(struct net_device *dev) } else { if (request_irq(priv->interruptTransmit, gfar_interrupt, 0, "gfar_interrupt", dev) < 0) { - printk(KERN_ERR "%s: Can't get IRQ %d\n", - dev->name, priv->interruptError); + if (netif_msg_intr(priv)) + printk(KERN_ERR "%s: Can't get IRQ %d\n", + dev->name, priv->interruptError); err = -1; goto err_irq_fail; @@ -787,28 +900,22 @@ int startup_gfar(struct net_device *dev) else gfar_write(®s->rxic, 0); - init_waitqueue_head(&priv->rxcleanupq); + if (priv->rx_csum_enable) + rctrl |= RCTRL_CHECKSUMMING; - /* Enable Rx and Tx in MACCFG1 */ - tempval = gfar_read(®s->maccfg1); - tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN); - gfar_write(®s->maccfg1, tempval); + if (priv->extended_hash) + rctrl |= RCTRL_EXTHASH; - /* Initialize DMACTRL to have WWR and WOP */ - tempval = gfar_read(&priv->regs->dmactrl); - tempval |= DMACTRL_INIT_SETTINGS; - gfar_write(&priv->regs->dmactrl, tempval); + if (priv->vlan_enable) + rctrl |= RCTRL_VLAN; - /* Clear THLT, so that the DMA starts polling now */ - gfar_write(®s->tstat, TSTAT_CLEAR_THALT); + /* Init rctrl based on our settings */ + gfar_write(&priv->regs->rctrl, rctrl); - /* Make sure we aren't stopped */ - tempval = gfar_read(&priv->regs->dmactrl); - tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); - gfar_write(&priv->regs->dmactrl, tempval); + if (dev->features & NETIF_F_IP_CSUM) + gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM); - /* Unmask the interrupts we look for */ - gfar_write(®s->imask, IMASK_DEFAULT); + gfar_start(dev); return 0; @@ -824,7 +931,7 @@ tx_skb_fail: sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, - gfar_read(®s->tbase)); + gfar_read(®s->tbase0)); if (priv->mii_info->phyinfo->close) priv->mii_info->phyinfo->close(priv->mii_info); @@ -857,11 +964,62 @@ static int gfar_enet_open(struct net_device *dev) return err; } +static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) +{ + struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN); + + memset(fcb, 0, GMAC_FCB_LEN); + + /* Flag the bd so the controller looks for the FCB */ + bdp->status |= TXBD_TOE; + + return fcb; +} + +static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) +{ + int len; + + /* If we're here, it's a IP packet with a TCP or UDP + * payload. We set it to checksum, using a pseudo-header + * we provide + */ + fcb->ip = 1; + fcb->tup = 1; + fcb->ctu = 1; + fcb->nph = 1; + + /* Notify the controller what the protocol is */ + if (skb->nh.iph->protocol == IPPROTO_UDP) + fcb->udp = 1; + + /* l3os is the distance between the start of the + * frame (skb->data) and the start of the IP hdr. + * l4os is the distance between the start of the + * l3 hdr and the l4 hdr */ + fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN); + fcb->l4os = (u16)(skb->h.raw - skb->nh.raw); + + len = skb->nh.iph->tot_len - fcb->l4os; + + /* Provide the pseudoheader csum */ + fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, len, + skb->nh.iph->protocol, 0); +} + +void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) +{ + fcb->vln = 1; + fcb->vlctl = vlan_tx_tag_get(skb); +} + /* This is called by the kernel when a frame is ready for transmission. */ /* It is pointed to by the dev->hard_start_xmit function pointer */ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); + struct txfcb *fcb = NULL; struct txbd8 *txbdp; /* Update transmit stats */ @@ -876,9 +1034,24 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Clear all but the WRAP status flags */ txbdp->status &= TXBD_WRAP; + /* Set up checksumming */ + if ((dev->features & NETIF_F_IP_CSUM) + && (CHECKSUM_HW == skb->ip_summed)) { + fcb = gfar_add_fcb(skb, txbdp); + gfar_tx_checksum(skb, fcb); + } + + if (priv->vlan_enable && + unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) { + if (NULL == fcb) + fcb = gfar_add_fcb(skb, txbdp); + + gfar_tx_vlan(skb, fcb); + } + /* Set buffer length and pointer */ txbdp->length = skb->len; - txbdp->bufPtr = dma_map_single(NULL, skb->data, + txbdp->bufPtr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); /* Save the skb pointer so we can free it later */ @@ -972,15 +1145,78 @@ int gfar_set_mac_address(struct net_device *dev) } +/* Enables and disables VLAN insertion/extraction */ +static void gfar_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct gfar_private *priv = netdev_priv(dev); + unsigned long flags; + u32 tempval; + + spin_lock_irqsave(&priv->lock, flags); + + priv->vlgrp = grp; + + if (grp) { + /* Enable VLAN tag insertion */ + tempval = gfar_read(&priv->regs->tctrl); + tempval |= TCTRL_VLINS; + + gfar_write(&priv->regs->tctrl, tempval); + + /* Enable VLAN tag extraction */ + tempval = gfar_read(&priv->regs->rctrl); + tempval |= RCTRL_VLEX; + gfar_write(&priv->regs->rctrl, tempval); + } else { + /* Disable VLAN tag insertion */ + tempval = gfar_read(&priv->regs->tctrl); + tempval &= ~TCTRL_VLINS; + gfar_write(&priv->regs->tctrl, tempval); + + /* Disable VLAN tag extraction */ + tempval = gfar_read(&priv->regs->rctrl); + tempval &= ~RCTRL_VLEX; + gfar_write(&priv->regs->rctrl, tempval); + } + + spin_unlock_irqrestore(&priv->lock, flags); +} + + +static void gfar_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) +{ + struct gfar_private *priv = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->vlgrp) + priv->vlgrp->vlan_devices[vid] = NULL; + + spin_unlock_irqrestore(&priv->lock, flags); +} + + static int gfar_change_mtu(struct net_device *dev, int new_mtu) { int tempsize, tempval; struct gfar_private *priv = netdev_priv(dev); int oldsize = priv->rx_buffer_size; - int frame_size = new_mtu + 18; + int frame_size = new_mtu + ETH_HLEN; + + if (priv->vlan_enable) + frame_size += VLAN_ETH_HLEN; + + if (gfar_uses_fcb(priv)) + frame_size += GMAC_FCB_LEN; + + frame_size += priv->padding; if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) { - printk(KERN_ERR "%s: Invalid MTU setting\n", dev->name); + if (netif_msg_drv(priv)) + printk(KERN_ERR "%s: Invalid MTU setting\n", + dev->name); return -EINVAL; } @@ -1120,7 +1356,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) skb->dev = dev; bdp->bufPtr = dma_map_single(NULL, skb->data, - priv->rx_buffer_size + RXBUF_ALIGNMENT, + priv->rx_buffer_size + RXBUF_ALIGNMENT, DMA_FROM_DEVICE); bdp->length = 0; @@ -1190,11 +1426,10 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs) __netif_rx_schedule(dev); } else { -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n", - dev->name, gfar_read(&priv->regs->ievent), - gfar_read(&priv->regs->imask)); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n", + dev->name, gfar_read(&priv->regs->ievent), + gfar_read(&priv->regs->imask)); } #else @@ -1209,15 +1444,43 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs) else gfar_write(&priv->regs->rxic, 0); - /* Just in case we need to wake the ring param changer */ - priv->rxclean = 1; - spin_unlock(&priv->lock); #endif return IRQ_HANDLED; } +static inline int gfar_rx_vlan(struct sk_buff *skb, + struct vlan_group *vlgrp, unsigned short vlctl) +{ +#ifdef CONFIG_GFAR_NAPI + return vlan_hwaccel_receive_skb(skb, vlgrp, vlctl); +#else + return vlan_hwaccel_rx(skb, vlgrp, vlctl); +#endif +} + +static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) +{ + /* If valid headers were found, and valid sums + * were verified, then we tell the kernel that no + * checksumming is necessary. Otherwise, it is */ + if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; +} + + +static inline struct rxfcb *gfar_get_fcb(struct sk_buff *skb) +{ + struct rxfcb *fcb = (struct rxfcb *)skb->data; + + /* Remove the FCB from the skb */ + skb_pull(skb, GMAC_FCB_LEN); + + return fcb; +} /* gfar_process_frame() -- handle one incoming packet if skb * isn't NULL. */ @@ -1225,35 +1488,51 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length) { struct gfar_private *priv = netdev_priv(dev); + struct rxfcb *fcb = NULL; if (skb == NULL) { -#ifdef BRIEF_GFAR_ERRORS - printk(KERN_WARNING "%s: Missing skb!!.\n", - dev->name); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name); priv->stats.rx_dropped++; priv->extra_stats.rx_skbmissing++; } else { + int ret; + /* Prep the skb for the packet */ skb_put(skb, length); + /* Grab the FCB if there is one */ + if (gfar_uses_fcb(priv)) + fcb = gfar_get_fcb(skb); + + /* Remove the padded bytes, if there are any */ + if (priv->padding) + skb_pull(skb, priv->padding); + + if (priv->rx_csum_enable) + gfar_rx_checksum(skb, fcb); + /* Tell the skb what kind of packet this is */ skb->protocol = eth_type_trans(skb, dev); /* Send the packet up the stack */ - if (RECEIVE(skb) == NET_RX_DROP) { + if (unlikely(priv->vlgrp && fcb->vln)) + ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl); + else + ret = RECEIVE(skb); + + if (NET_RX_DROP == ret) priv->extra_stats.kernel_dropped++; - } } return 0; } /* gfar_clean_rx_ring() -- Processes each frame in the rx ring - * until the budget/quota has been reached. Returns the number + * until the budget/quota has been reached. Returns the number * of frames handled */ -static int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) +int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) { struct rxbd8 *bdp; struct sk_buff *skb; @@ -1355,9 +1634,6 @@ static int gfar_poll(struct net_device *dev, int *budget) mk_ic_value(priv->rxcount, priv->rxtime)); else gfar_write(&priv->regs->rxic, 0); - - /* Signal to the ring size changer that it's safe to go */ - priv->rxclean = 1; } return (rx_work_limit < 0) ? 1 : 0; @@ -1393,10 +1669,8 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (events & IEVENT_CRL) priv->stats.tx_aborted_errors++; if (events & IEVENT_XFUN) { -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_WARNING "%s: tx underrun. dropped packet\n", - dev->name); -#endif + if (netif_msg_tx_err(priv)) + printk(KERN_WARNING "%s: tx underrun. dropped packet\n", dev->name); priv->stats.tx_dropped++; priv->extra_stats.tx_underrun++; @@ -1415,36 +1689,30 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs) gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); #endif -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n", dev->name, - gfar_read(&priv->regs->rstat)); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n", + dev->name, + gfar_read(&priv->regs->rstat)); } if (events & IEVENT_BABR) { priv->stats.rx_errors++; priv->extra_stats.rx_babr++; -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: babbling error\n", dev->name); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: babbling error\n", dev->name); } if (events & IEVENT_EBERR) { priv->extra_stats.eberr++; -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: EBERR\n", dev->name); -#endif - } - if (events & IEVENT_RXC) { -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: control frame\n", dev->name); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: EBERR\n", dev->name); } + if ((events & IEVENT_RXC) && (netif_msg_rx_err(priv))) + printk(KERN_DEBUG "%s: control frame\n", dev->name); if (events & IEVENT_BABT) { priv->extra_stats.tx_babt++; -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: babt error\n", dev->name); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: babt error\n", dev->name); } return IRQ_HANDLED; @@ -1510,7 +1778,7 @@ static void gfar_phy_timer(unsigned long data) * If, after GFAR_AN_TIMEOUT seconds, it has not * finished, we switch to forced. * Either way, once the process has completed, we either - * request the interrupt, or switch the timer over to + * request the interrupt, or switch the timer over to * using gfar_phy_timer to check status */ static void gfar_phy_startup_timer(unsigned long data) { @@ -1535,8 +1803,9 @@ static void gfar_phy_startup_timer(unsigned long data) /* Forcing failed! Give up */ if(result) { - printk(KERN_ERR "%s: Forcing failed!\n", - mii_info->dev->name); + if (netif_msg_link(priv)) + printk(KERN_ERR "%s: Forcing failed!\n", + mii_info->dev->name); return; } } @@ -1546,16 +1815,17 @@ static void gfar_phy_startup_timer(unsigned long data) /* Grab the PHY interrupt, if necessary/possible */ if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - if (request_irq(priv->einfo->interruptPHY, + if (request_irq(priv->einfo->interruptPHY, phy_interrupt, - SA_SHIRQ, - "phy_interrupt", + SA_SHIRQ, + "phy_interrupt", mii_info->dev) < 0) { - printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n", - mii_info->dev->name, + if (netif_msg_intr(priv)) + printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n", + mii_info->dev->name, priv->einfo->interruptPHY); } else { - mii_configure_phy_interrupt(priv->mii_info, + mii_configure_phy_interrupt(priv->mii_info, MII_INTERRUPT_ENABLED); return; } @@ -1592,15 +1862,17 @@ static void adjust_link(struct net_device *dev) tempval &= ~(MACCFG2_FULL_DUPLEX); gfar_write(®s->maccfg2, tempval); - printk(KERN_INFO "%s: Half Duplex\n", - dev->name); + if (netif_msg_link(priv)) + printk(KERN_INFO "%s: Half Duplex\n", + dev->name); } else { tempval = gfar_read(®s->maccfg2); tempval |= MACCFG2_FULL_DUPLEX; gfar_write(®s->maccfg2, tempval); - printk(KERN_INFO "%s: Full Duplex\n", - dev->name); + if (netif_msg_link(priv)) + printk(KERN_INFO "%s: Full Duplex\n", + dev->name); } priv->oldduplex = mii_info->duplex; @@ -1622,27 +1894,32 @@ static void adjust_link(struct net_device *dev) gfar_write(®s->maccfg2, tempval); break; default: - printk(KERN_WARNING - "%s: Ack! Speed (%d) is not 10/100/1000!\n", - dev->name, mii_info->speed); + if (netif_msg_link(priv)) + printk(KERN_WARNING + "%s: Ack! Speed (%d) is not 10/100/1000!\n", + dev->name, mii_info->speed); break; } - printk(KERN_INFO "%s: Speed %dBT\n", dev->name, - mii_info->speed); + if (netif_msg_link(priv)) + printk(KERN_INFO "%s: Speed %dBT\n", dev->name, + mii_info->speed); priv->oldspeed = mii_info->speed; } if (!priv->oldlink) { - printk(KERN_INFO "%s: Link is up\n", dev->name); + if (netif_msg_link(priv)) + printk(KERN_INFO "%s: Link is up\n", dev->name); priv->oldlink = 1; netif_carrier_on(dev); netif_schedule(dev); } } else { if (priv->oldlink) { - printk(KERN_INFO "%s: Link is down\n", dev->name); + if (netif_msg_link(priv)) + printk(KERN_INFO "%s: Link is down\n", + dev->name); priv->oldlink = 0; priv->oldspeed = 0; priv->oldduplex = -1; @@ -1664,8 +1941,9 @@ static void gfar_set_multi(struct net_device *dev) u32 tempval; if(dev->flags & IFF_PROMISC) { - printk(KERN_INFO "%s: Entering promiscuous mode.\n", - dev->name); + if (netif_msg_drv(priv)) + printk(KERN_INFO "%s: Entering promiscuous mode.\n", + dev->name); /* Set RCTRL to PROM */ tempval = gfar_read(®s->rctrl); tempval |= RCTRL_PROM; @@ -1679,6 +1957,14 @@ static void gfar_set_multi(struct net_device *dev) if(dev->flags & IFF_ALLMULTI) { /* Set the hash to rx all multicast frames */ + gfar_write(®s->igaddr0, 0xffffffff); + gfar_write(®s->igaddr1, 0xffffffff); + gfar_write(®s->igaddr2, 0xffffffff); + gfar_write(®s->igaddr3, 0xffffffff); + gfar_write(®s->igaddr4, 0xffffffff); + gfar_write(®s->igaddr5, 0xffffffff); + gfar_write(®s->igaddr6, 0xffffffff); + gfar_write(®s->igaddr7, 0xffffffff); gfar_write(®s->gaddr0, 0xffffffff); gfar_write(®s->gaddr1, 0xffffffff); gfar_write(®s->gaddr2, 0xffffffff); @@ -1689,6 +1975,14 @@ static void gfar_set_multi(struct net_device *dev) gfar_write(®s->gaddr7, 0xffffffff); } else { /* zero out the hash */ + gfar_write(®s->igaddr0, 0x0); + gfar_write(®s->igaddr1, 0x0); + gfar_write(®s->igaddr2, 0x0); + gfar_write(®s->igaddr3, 0x0); + gfar_write(®s->igaddr4, 0x0); + gfar_write(®s->igaddr5, 0x0); + gfar_write(®s->igaddr6, 0x0); + gfar_write(®s->igaddr7, 0x0); gfar_write(®s->gaddr0, 0x0); gfar_write(®s->gaddr1, 0x0); gfar_write(®s->gaddr2, 0x0); @@ -1727,16 +2021,15 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr) { u32 tempval; struct gfar_private *priv = netdev_priv(dev); - struct gfar *regs = priv->regs; - u32 *hash = ®s->gaddr0; u32 result = ether_crc(MAC_ADDR_LEN, addr); - u8 whichreg = ((result >> 29) & 0x7); - u8 whichbit = ((result >> 24) & 0x1f); + int width = priv->hash_width; + u8 whichbit = (result >> (32 - width)) & 0x1f; + u8 whichreg = result >> (32 - width + 5); u32 value = (1 << (31-whichbit)); - tempval = gfar_read(&hash[whichreg]); + tempval = gfar_read(priv->hash_regs[whichreg]); tempval |= value; - gfar_write(&hash[whichreg], tempval); + gfar_write(priv->hash_regs[whichreg], tempval); return; } @@ -1754,10 +2047,9 @@ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs) gfar_write(&priv->regs->ievent, IEVENT_ERR_MASK); /* Hmm... */ -#if defined (BRIEF_GFAR_ERRORS) || defined (VERBOSE_GFAR_ERRORS) - printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n", - dev->name, events, gfar_read(&priv->regs->imask)); -#endif + if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv)) + printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n", + dev->name, events, gfar_read(&priv->regs->imask)); /* Update the error counters */ if (events & IEVENT_TXE) { @@ -1768,19 +2060,17 @@ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs) if (events & IEVENT_CRL) priv->stats.tx_aborted_errors++; if (events & IEVENT_XFUN) { -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: underrun. packet dropped.\n", - dev->name); -#endif + if (netif_msg_tx_err(priv)) + printk(KERN_DEBUG "%s: underrun. packet dropped.\n", + dev->name); priv->stats.tx_dropped++; priv->extra_stats.tx_underrun++; /* Reactivate the Tx Queues */ gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT); } -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: Transmit Error\n", dev->name); -#endif + if (netif_msg_tx_err(priv)) + printk(KERN_DEBUG "%s: Transmit Error\n", dev->name); } if (events & IEVENT_BSY) { priv->stats.rx_errors++; @@ -1793,35 +2083,31 @@ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs) gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); #endif -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n", dev->name, - gfar_read(&priv->regs->rstat)); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n", + dev->name, + gfar_read(&priv->regs->rstat)); } if (events & IEVENT_BABR) { priv->stats.rx_errors++; priv->extra_stats.rx_babr++; -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: babbling error\n", dev->name); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: babbling error\n", dev->name); } if (events & IEVENT_EBERR) { priv->extra_stats.eberr++; -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: EBERR\n", dev->name); -#endif + if (netif_msg_rx_err(priv)) + printk(KERN_DEBUG "%s: EBERR\n", dev->name); } - if (events & IEVENT_RXC) -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: control frame\n", dev->name); -#endif + if ((events & IEVENT_RXC) && netif_msg_rx_status(priv)) + if (netif_msg_rx_status(priv)) + printk(KERN_DEBUG "%s: control frame\n", dev->name); if (events & IEVENT_BABT) { priv->extra_stats.tx_babt++; -#ifdef VERBOSE_GFAR_ERRORS - printk(KERN_DEBUG "%s: babt error\n", dev->name); -#endif + if (netif_msg_tx_err(priv)) + printk(KERN_DEBUG "%s: babt error\n", dev->name); } return IRQ_HANDLED; } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index c2f783a6a9f..28af087d9fb 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -1,4 +1,4 @@ -/* +/* * drivers/net/gianfar.h * * Gianfar Ethernet Driver @@ -53,6 +53,12 @@ /* The maximum number of packets to be handled in one call of gfar_poll */ #define GFAR_DEV_WEIGHT 64 +/* Length for FCB */ +#define GMAC_FCB_LEN 8 + +/* Default padding amount */ +#define DEFAULT_PADDING 2 + /* Number of bytes to align the rx bufs to */ #define RXBUF_ALIGNMENT 64 @@ -91,7 +97,7 @@ extern const char gfar_driver_version[]; #define JUMBO_FRAME_SIZE 9600 /* Latency of interface clock in nanoseconds */ -/* Interface clock latency , in this case, means the +/* Interface clock latency , in this case, means the * time described by a value of 1 in the interrupt * coalescing registers' time fields. Since those fields * refer to the time it takes for 64 clocks to pass, the @@ -166,9 +172,28 @@ extern const char gfar_driver_version[]; mk_ic_icft(count) | \ mk_ic_ictt(time)) +#define RCTRL_PAL_MASK 0x001f0000 +#define RCTRL_VLEX 0x00002000 +#define RCTRL_FILREN 0x00001000 +#define RCTRL_GHTX 0x00000400 +#define RCTRL_IPCSEN 0x00000200 +#define RCTRL_TUCSEN 0x00000100 +#define RCTRL_PRSDEP_MASK 0x000000c0 +#define RCTRL_PRSDEP_INIT 0x000000c0 #define RCTRL_PROM 0x00000008 +#define RCTRL_CHECKSUMMING (RCTRL_IPCSEN \ + | RCTRL_TUCSEN | RCTRL_PRSDEP_INIT) +#define RCTRL_EXTHASH (RCTRL_GHTX) +#define RCTRL_VLAN (RCTRL_PRSDEP_INIT) + + #define RSTAT_CLEAR_RHALT 0x00800000 +#define TCTRL_IPCSEN 0x00004000 +#define TCTRL_TUCSEN 0x00002000 +#define TCTRL_VLINS 0x00001000 +#define TCTRL_INIT_CSUM (TCTRL_TUCSEN | TCTRL_IPCSEN) + #define IEVENT_INIT_CLEAR 0xffffffff #define IEVENT_BABR 0x80000000 #define IEVENT_RXC 0x40000000 @@ -187,12 +212,16 @@ extern const char gfar_driver_version[]; #define IEVENT_RXB0 0x00008000 #define IEVENT_GRSC 0x00000100 #define IEVENT_RXF0 0x00000080 +#define IEVENT_FIR 0x00000008 +#define IEVENT_FIQ 0x00000004 +#define IEVENT_DPE 0x00000002 +#define IEVENT_PERR 0x00000001 #define IEVENT_RX_MASK (IEVENT_RXB0 | IEVENT_RXF0) #define IEVENT_TX_MASK (IEVENT_TXB | IEVENT_TXF) #define IEVENT_ERR_MASK \ (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \ IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \ - | IEVENT_CRL | IEVENT_XFUN) + | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR) #define IMASK_INIT_CLEAR 0x00000000 #define IMASK_BABR 0x80000000 @@ -212,10 +241,15 @@ extern const char gfar_driver_version[]; #define IMASK_RXB0 0x00008000 #define IMASK_GTSC 0x00000100 #define IMASK_RXFEN0 0x00000080 +#define IMASK_FIR 0x00000008 +#define IMASK_FIQ 0x00000004 +#define IMASK_DPE 0x00000002 +#define IMASK_PERR 0x00000001 #define IMASK_RX_DISABLED ~(IMASK_RXFEN0 | IMASK_BSY) #define IMASK_DEFAULT (IMASK_TXEEN | IMASK_TXFEN | IMASK_TXBEN | \ IMASK_RXFEN0 | IMASK_BSY | IMASK_EBERR | IMASK_BABR | \ - IMASK_XFUN | IMASK_RXC | IMASK_BABT) + IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \ + | IMASK_PERR) /* Attribute fields */ @@ -254,6 +288,18 @@ extern const char gfar_driver_version[]; #define TXBD_RETRYLIMIT 0x0040 #define TXBD_RETRYCOUNTMASK 0x003c #define TXBD_UNDERRUN 0x0002 +#define TXBD_TOE 0x0002 + +/* Tx FCB param bits */ +#define TXFCB_VLN 0x80 +#define TXFCB_IP 0x40 +#define TXFCB_IP6 0x20 +#define TXFCB_TUP 0x10 +#define TXFCB_UDP 0x08 +#define TXFCB_CIP 0x04 +#define TXFCB_CTU 0x02 +#define TXFCB_NPH 0x01 +#define TXFCB_DEFAULT (TXFCB_IP|TXFCB_TUP|TXFCB_CTU|TXFCB_NPH) /* RxBD status field bits */ #define RXBD_EMPTY 0x8000 @@ -273,6 +319,18 @@ extern const char gfar_driver_version[]; #define RXBD_TRUNCATED 0x0001 #define RXBD_STATS 0x01ff +/* Rx FCB status field bits */ +#define RXFCB_VLN 0x8000 +#define RXFCB_IP 0x4000 +#define RXFCB_IP6 0x2000 +#define RXFCB_TUP 0x1000 +#define RXFCB_CIP 0x0800 +#define RXFCB_CTU 0x0400 +#define RXFCB_EIP 0x0200 +#define RXFCB_ETU 0x0100 +#define RXFCB_PERR_MASK 0x000c +#define RXFCB_PERR_BADL3 0x0008 + struct txbd8 { u16 status; /* Status Fields */ @@ -280,6 +338,22 @@ struct txbd8 u32 bufPtr; /* Buffer Pointer */ }; +struct txfcb { + u8 vln:1, + ip:1, + ip6:1, + tup:1, + udp:1, + cip:1, + ctu:1, + nph:1; + u8 reserved; + u8 l4os; /* Level 4 Header Offset */ + u8 l3os; /* Level 3 Header Offset */ + u16 phcs; /* Pseudo-header Checksum */ + u16 vlctl; /* VLAN control word */ +}; + struct rxbd8 { u16 status; /* Status Fields */ @@ -287,6 +361,21 @@ struct rxbd8 u32 bufPtr; /* Buffer Pointer */ }; +struct rxfcb { + u16 vln:1, + ip:1, + ip6:1, + tup:1, + cip:1, + ctu:1, + eip:1, + etu:1; + u8 rq; /* Receive Queue index */ + u8 pro; /* Layer 4 Protocol */ + u16 reserved; + u16 vlctl; /* VLAN control word */ +}; + struct rmon_mib { u32 tr64; /* 0x.680 - Transmit and Receive 64-byte Frame Counter */ @@ -371,90 +460,191 @@ struct gfar_stats { struct gfar { - u8 res1[16]; - u32 ievent; /* 0x.010 - Interrupt Event Register */ - u32 imask; /* 0x.014 - Interrupt Mask Register */ - u32 edis; /* 0x.018 - Error Disabled Register */ + u32 tsec_id; /* 0x.000 - Controller ID register */ + u8 res1[12]; + u32 ievent; /* 0x.010 - Interrupt Event Register */ + u32 imask; /* 0x.014 - Interrupt Mask Register */ + u32 edis; /* 0x.018 - Error Disabled Register */ u8 res2[4]; - u32 ecntrl; /* 0x.020 - Ethernet Control Register */ - u32 minflr; /* 0x.024 - Minimum Frame Length Register */ - u32 ptv; /* 0x.028 - Pause Time Value Register */ - u32 dmactrl; /* 0x.02c - DMA Control Register */ - u32 tbipa; /* 0x.030 - TBI PHY Address Register */ + u32 ecntrl; /* 0x.020 - Ethernet Control Register */ + u32 minflr; /* 0x.024 - Minimum Frame Length Register */ + u32 ptv; /* 0x.028 - Pause Time Value Register */ + u32 dmactrl; /* 0x.02c - DMA Control Register */ + u32 tbipa; /* 0x.030 - TBI PHY Address Register */ u8 res3[88]; - u32 fifo_tx_thr; /* 0x.08c - FIFO transmit threshold register */ + u32 fifo_tx_thr; /* 0x.08c - FIFO transmit threshold register */ u8 res4[8]; - u32 fifo_tx_starve; /* 0x.098 - FIFO transmit starve register */ + u32 fifo_tx_starve; /* 0x.098 - FIFO transmit starve register */ u32 fifo_tx_starve_shutoff; /* 0x.09c - FIFO transmit starve shutoff register */ - u8 res5[96]; - u32 tctrl; /* 0x.100 - Transmit Control Register */ - u32 tstat; /* 0x.104 - Transmit Status Register */ - u8 res6[4]; - u32 tbdlen; /* 0x.10c - Transmit Buffer Descriptor Data Length Register */ - u32 txic; /* 0x.110 - Transmit Interrupt Coalescing Configuration Register */ - u8 res7[16]; - u32 ctbptr; /* 0x.124 - Current Transmit Buffer Descriptor Pointer Register */ - u8 res8[92]; - u32 tbptr; /* 0x.184 - Transmit Buffer Descriptor Pointer Low Register */ - u8 res9[124]; - u32 tbase; /* 0x.204 - Transmit Descriptor Base Address Register */ - u8 res10[168]; - u32 ostbd; /* 0x.2b0 - Out-of-Sequence Transmit Buffer Descriptor Register */ - u32 ostbdp; /* 0x.2b4 - Out-of-Sequence Transmit Data Buffer Pointer Register */ - u8 res11[72]; - u32 rctrl; /* 0x.300 - Receive Control Register */ - u32 rstat; /* 0x.304 - Receive Status Register */ - u8 res12[4]; - u32 rbdlen; /* 0x.30c - RxBD Data Length Register */ - u32 rxic; /* 0x.310 - Receive Interrupt Coalescing Configuration Register */ - u8 res13[16]; - u32 crbptr; /* 0x.324 - Current Receive Buffer Descriptor Pointer */ - u8 res14[24]; - u32 mrblr; /* 0x.340 - Maximum Receive Buffer Length Register */ - u8 res15[64]; - u32 rbptr; /* 0x.384 - Receive Buffer Descriptor Pointer */ - u8 res16[124]; - u32 rbase; /* 0x.404 - Receive Descriptor Base Address */ - u8 res17[248]; - u32 maccfg1; /* 0x.500 - MAC Configuration 1 Register */ - u32 maccfg2; /* 0x.504 - MAC Configuration 2 Register */ - u32 ipgifg; /* 0x.508 - Inter Packet Gap/Inter Frame Gap Register */ - u32 hafdup; /* 0x.50c - Half Duplex Register */ - u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */ + u8 res5[4]; + u32 fifo_rx_pause; /* 0x.0a4 - FIFO receive pause threshold register */ + u32 fifo_rx_alarm; /* 0x.0a8 - FIFO receive alarm threshold register */ + u8 res6[84]; + u32 tctrl; /* 0x.100 - Transmit Control Register */ + u32 tstat; /* 0x.104 - Transmit Status Register */ + u32 dfvlan; /* 0x.108 - Default VLAN Control word */ + u32 tbdlen; /* 0x.10c - Transmit Buffer Descriptor Data Length Register */ + u32 txic; /* 0x.110 - Transmit Interrupt Coalescing Configuration Register */ + u32 tqueue; /* 0x.114 - Transmit queue control register */ + u8 res7[40]; + u32 tr03wt; /* 0x.140 - TxBD Rings 0-3 round-robin weightings */ + u32 tr47wt; /* 0x.144 - TxBD Rings 4-7 round-robin weightings */ + u8 res8[52]; + u32 tbdbph; /* 0x.17c - Tx data buffer pointer high */ + u8 res9a[4]; + u32 tbptr0; /* 0x.184 - TxBD Pointer for ring 0 */ + u8 res9b[4]; + u32 tbptr1; /* 0x.18c - TxBD Pointer for ring 1 */ + u8 res9c[4]; + u32 tbptr2; /* 0x.194 - TxBD Pointer for ring 2 */ + u8 res9d[4]; + u32 tbptr3; /* 0x.19c - TxBD Pointer for ring 3 */ + u8 res9e[4]; + u32 tbptr4; /* 0x.1a4 - TxBD Pointer for ring 4 */ + u8 res9f[4]; + u32 tbptr5; /* 0x.1ac - TxBD Pointer for ring 5 */ + u8 res9g[4]; + u32 tbptr6; /* 0x.1b4 - TxBD Pointer for ring 6 */ + u8 res9h[4]; + u32 tbptr7; /* 0x.1bc - TxBD Pointer for ring 7 */ + u8 res9[64]; + u32 tbaseh; /* 0x.200 - TxBD base address high */ + u32 tbase0; /* 0x.204 - TxBD Base Address of ring 0 */ + u8 res10a[4]; + u32 tbase1; /* 0x.20c - TxBD Base Address of ring 1 */ + u8 res10b[4]; + u32 tbase2; /* 0x.214 - TxBD Base Address of ring 2 */ + u8 res10c[4]; + u32 tbase3; /* 0x.21c - TxBD Base Address of ring 3 */ + u8 res10d[4]; + u32 tbase4; /* 0x.224 - TxBD Base Address of ring 4 */ + u8 res10e[4]; + u32 tbase5; /* 0x.22c - TxBD Base Address of ring 5 */ + u8 res10f[4]; + u32 tbase6; /* 0x.234 - TxBD Base Address of ring 6 */ + u8 res10g[4]; + u32 tbase7; /* 0x.23c - TxBD Base Address of ring 7 */ + u8 res10[192]; + u32 rctrl; /* 0x.300 - Receive Control Register */ + u32 rstat; /* 0x.304 - Receive Status Register */ + u8 res12[8]; + u32 rxic; /* 0x.310 - Receive Interrupt Coalescing Configuration Register */ + u32 rqueue; /* 0x.314 - Receive queue control register */ + u8 res13[24]; + u32 rbifx; /* 0x.330 - Receive bit field extract control register */ + u32 rqfar; /* 0x.334 - Receive queue filing table address register */ + u32 rqfcr; /* 0x.338 - Receive queue filing table control register */ + u32 rqfpr; /* 0x.33c - Receive queue filing table property register */ + u32 mrblr; /* 0x.340 - Maximum Receive Buffer Length Register */ + u8 res14[56]; + u32 rbdbph; /* 0x.37c - Rx data buffer pointer high */ + u8 res15a[4]; + u32 rbptr0; /* 0x.384 - RxBD pointer for ring 0 */ + u8 res15b[4]; + u32 rbptr1; /* 0x.38c - RxBD pointer for ring 1 */ + u8 res15c[4]; + u32 rbptr2; /* 0x.394 - RxBD pointer for ring 2 */ + u8 res15d[4]; + u32 rbptr3; /* 0x.39c - RxBD pointer for ring 3 */ + u8 res15e[4]; + u32 rbptr4; /* 0x.3a4 - RxBD pointer for ring 4 */ + u8 res15f[4]; + u32 rbptr5; /* 0x.3ac - RxBD pointer for ring 5 */ + u8 res15g[4]; + u32 rbptr6; /* 0x.3b4 - RxBD pointer for ring 6 */ + u8 res15h[4]; + u32 rbptr7; /* 0x.3bc - RxBD pointer for ring 7 */ + u8 res16[64]; + u32 rbaseh; /* 0x.400 - RxBD base address high */ + u32 rbase0; /* 0x.404 - RxBD base address of ring 0 */ + u8 res17a[4]; + u32 rbase1; /* 0x.40c - RxBD base address of ring 1 */ + u8 res17b[4]; + u32 rbase2; /* 0x.414 - RxBD base address of ring 2 */ + u8 res17c[4]; + u32 rbase3; /* 0x.41c - RxBD base address of ring 3 */ + u8 res17d[4]; + u32 rbase4; /* 0x.424 - RxBD base address of ring 4 */ + u8 res17e[4]; + u32 rbase5; /* 0x.42c - RxBD base address of ring 5 */ + u8 res17f[4]; + u32 rbase6; /* 0x.434 - RxBD base address of ring 6 */ + u8 res17g[4]; + u32 rbase7; /* 0x.43c - RxBD base address of ring 7 */ + u8 res17[192]; + u32 maccfg1; /* 0x.500 - MAC Configuration 1 Register */ + u32 maccfg2; /* 0x.504 - MAC Configuration 2 Register */ + u32 ipgifg; /* 0x.508 - Inter Packet Gap/Inter Frame Gap Register */ + u32 hafdup; /* 0x.50c - Half Duplex Register */ + u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */ u8 res18[12]; - u32 miimcfg; /* 0x.520 - MII Management Configuration Register */ - u32 miimcom; /* 0x.524 - MII Management Command Register */ - u32 miimadd; /* 0x.528 - MII Management Address Register */ - u32 miimcon; /* 0x.52c - MII Management Control Register */ - u32 miimstat; /* 0x.530 - MII Management Status Register */ - u32 miimind; /* 0x.534 - MII Management Indicator Register */ + u32 miimcfg; /* 0x.520 - MII Management Configuration Register */ + u32 miimcom; /* 0x.524 - MII Management Command Register */ + u32 miimadd; /* 0x.528 - MII Management Address Register */ + u32 miimcon; /* 0x.52c - MII Management Control Register */ + u32 miimstat; /* 0x.530 - MII Management Status Register */ + u32 miimind; /* 0x.534 - MII Management Indicator Register */ u8 res19[4]; - u32 ifstat; /* 0x.53c - Interface Status Register */ - u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */ - u32 macstnaddr2; /* 0x.544 - Station Address Part 2 Register */ - u8 res20[312]; - struct rmon_mib rmon; - u8 res21[192]; - u32 iaddr0; /* 0x.800 - Indivdual address register 0 */ - u32 iaddr1; /* 0x.804 - Indivdual address register 1 */ - u32 iaddr2; /* 0x.808 - Indivdual address register 2 */ - u32 iaddr3; /* 0x.80c - Indivdual address register 3 */ - u32 iaddr4; /* 0x.810 - Indivdual address register 4 */ - u32 iaddr5; /* 0x.814 - Indivdual address register 5 */ - u32 iaddr6; /* 0x.818 - Indivdual address register 6 */ - u32 iaddr7; /* 0x.81c - Indivdual address register 7 */ + u32 ifstat; /* 0x.53c - Interface Status Register */ + u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */ + u32 macstnaddr2; /* 0x.544 - Station Address Part 2 Register */ + u32 mac01addr1; /* 0x.548 - MAC exact match address 1, part 1 */ + u32 mac01addr2; /* 0x.54c - MAC exact match address 1, part 2 */ + u32 mac02addr1; /* 0x.550 - MAC exact match address 2, part 1 */ + u32 mac02addr2; /* 0x.554 - MAC exact match address 2, part 2 */ + u32 mac03addr1; /* 0x.558 - MAC exact match address 3, part 1 */ + u32 mac03addr2; /* 0x.55c - MAC exact match address 3, part 2 */ + u32 mac04addr1; /* 0x.560 - MAC exact match address 4, part 1 */ + u32 mac04addr2; /* 0x.564 - MAC exact match address 4, part 2 */ + u32 mac05addr1; /* 0x.568 - MAC exact match address 5, part 1 */ + u32 mac05addr2; /* 0x.56c - MAC exact match address 5, part 2 */ + u32 mac06addr1; /* 0x.570 - MAC exact match address 6, part 1 */ + u32 mac06addr2; /* 0x.574 - MAC exact match address 6, part 2 */ + u32 mac07addr1; /* 0x.578 - MAC exact match address 7, part 1 */ + u32 mac07addr2; /* 0x.57c - MAC exact match address 7, part 2 */ + u32 mac08addr1; /* 0x.580 - MAC exact match address 8, part 1 */ + u32 mac08addr2; /* 0x.584 - MAC exact match address 8, part 2 */ + u32 mac09addr1; /* 0x.588 - MAC exact match address 9, part 1 */ + u32 mac09addr2; /* 0x.58c - MAC exact match address 9, part 2 */ + u32 mac10addr1; /* 0x.590 - MAC exact match address 10, part 1*/ + u32 mac10addr2; /* 0x.594 - MAC exact match address 10, part 2*/ + u32 mac11addr1; /* 0x.598 - MAC exact match address 11, part 1*/ + u32 mac11addr2; /* 0x.59c - MAC exact match address 11, part 2*/ + u32 mac12addr1; /* 0x.5a0 - MAC exact match address 12, part 1*/ + u32 mac12addr2; /* 0x.5a4 - MAC exact match address 12, part 2*/ + u32 mac13addr1; /* 0x.5a8 - MAC exact match address 13, part 1*/ + u32 mac13addr2; /* 0x.5ac - MAC exact match address 13, part 2*/ + u32 mac14addr1; /* 0x.5b0 - MAC exact match address 14, part 1*/ + u32 mac14addr2; /* 0x.5b4 - MAC exact match address 14, part 2*/ + u32 mac15addr1; /* 0x.5b8 - MAC exact match address 15, part 1*/ + u32 mac15addr2; /* 0x.5bc - MAC exact match address 15, part 2*/ + u8 res20[192]; + struct rmon_mib rmon; /* 0x.680-0x.73c */ + u32 rrej; /* 0x.740 - Receive filer rejected packet counter */ + u8 res21[188]; + u32 igaddr0; /* 0x.800 - Indivdual/Group address register 0*/ + u32 igaddr1; /* 0x.804 - Indivdual/Group address register 1*/ + u32 igaddr2; /* 0x.808 - Indivdual/Group address register 2*/ + u32 igaddr3; /* 0x.80c - Indivdual/Group address register 3*/ + u32 igaddr4; /* 0x.810 - Indivdual/Group address register 4*/ + u32 igaddr5; /* 0x.814 - Indivdual/Group address register 5*/ + u32 igaddr6; /* 0x.818 - Indivdual/Group address register 6*/ + u32 igaddr7; /* 0x.81c - Indivdual/Group address register 7*/ u8 res22[96]; - u32 gaddr0; /* 0x.880 - Global address register 0 */ - u32 gaddr1; /* 0x.884 - Global address register 1 */ - u32 gaddr2; /* 0x.888 - Global address register 2 */ - u32 gaddr3; /* 0x.88c - Global address register 3 */ - u32 gaddr4; /* 0x.890 - Global address register 4 */ - u32 gaddr5; /* 0x.894 - Global address register 5 */ - u32 gaddr6; /* 0x.898 - Global address register 6 */ - u32 gaddr7; /* 0x.89c - Global address register 7 */ - u8 res23[856]; - u32 attr; /* 0x.bf8 - Attributes Register */ - u32 attreli; /* 0x.bfc - Attributes Extract Length and Extract Index Register */ + u32 gaddr0; /* 0x.880 - Group address register 0 */ + u32 gaddr1; /* 0x.884 - Group address register 1 */ + u32 gaddr2; /* 0x.888 - Group address register 2 */ + u32 gaddr3; /* 0x.88c - Group address register 3 */ + u32 gaddr4; /* 0x.890 - Group address register 4 */ + u32 gaddr5; /* 0x.894 - Group address register 5 */ + u32 gaddr6; /* 0x.898 - Group address register 6 */ + u32 gaddr7; /* 0x.89c - Group address register 7 */ + u8 res23a[352]; + u32 fifocfg; /* 0x.a00 - FIFO interface config register */ + u8 res23b[252]; + u8 res23c[248]; + u32 attr; /* 0x.bf8 - Attributes Register */ + u32 attreli; /* 0x.bfc - Attributes Extract Length and Extract Index Register */ u8 res24[1024]; }; @@ -496,6 +686,8 @@ struct gfar_private { struct txbd8 *cur_tx; /* Next free ring entry */ struct txbd8 *dirty_tx; /* The Ring entry to be freed. */ struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */ + u32 *hash_regs[16]; + int hash_width; struct gfar *phyregs; struct work_struct tq; struct timer_list phy_info_timer; @@ -506,9 +698,12 @@ struct gfar_private { unsigned int rx_stash_size; unsigned int tx_ring_size; unsigned int rx_ring_size; - wait_queue_head_t rxcleanupq; - unsigned int rxclean; + unsigned char vlan_enable:1, + rx_csum_enable:1, + extended_hash:1; + unsigned short padding; + struct vlan_group *vlgrp; /* Info structure initialized by board setup code */ unsigned int interruptTransmit; unsigned int interruptReceive; @@ -519,6 +714,8 @@ struct gfar_private { int oldspeed; int oldduplex; int oldlink; + + uint32_t msg_enable; }; extern inline u32 gfar_read(volatile unsigned *addr) diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 28046e9e88b..a451de62919 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -46,16 +46,18 @@ extern int startup_gfar(struct net_device *dev); extern void stop_gfar(struct net_device *dev); -extern void gfar_receive(int irq, void *dev_id, struct pt_regs *regs); +extern void gfar_halt(struct net_device *dev); +extern void gfar_start(struct net_device *dev); +extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); -void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, +static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf); -void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf); -int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals); -int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals); -void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals); -int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals); -void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo); +static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf); +static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals); +static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals); +static void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals); +static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals); +static void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo); static char stat_gstrings[][ETH_GSTRING_LEN] = { "rx-dropped-by-kernel", @@ -118,57 +120,56 @@ static char stat_gstrings[][ETH_GSTRING_LEN] = { "tx-fragmented-frames", }; +/* Fill in a buffer with the strings which correspond to the + * stats */ +static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf) +{ + struct gfar_private *priv = netdev_priv(dev); + + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) + memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN); + else + memcpy(buf, stat_gstrings, + GFAR_EXTRA_STATS_LEN * ETH_GSTRING_LEN); +} + /* Fill in an array of 64-bit statistics from various sources. * This array will be appended to the end of the ethtool_stats * structure, and returned to user space */ -void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf) +static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf) { int i; struct gfar_private *priv = netdev_priv(dev); - u32 *rmon = (u32 *) & priv->regs->rmon; u64 *extra = (u64 *) & priv->extra_stats; - struct gfar_stats *stats = (struct gfar_stats *) buf; - for (i = 0; i < GFAR_RMON_LEN; i++) { - stats->rmon[i] = (u64) (rmon[i]); - } - - for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) { - stats->extra[i] = extra[i]; - } -} + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { + u32 *rmon = (u32 *) & priv->regs->rmon; + struct gfar_stats *stats = (struct gfar_stats *) buf; -/* Returns the number of stats (and their corresponding strings) */ -int gfar_stats_count(struct net_device *dev) -{ - return GFAR_STATS_LEN; -} + for (i = 0; i < GFAR_RMON_LEN; i++) + stats->rmon[i] = (u64) (rmon[i]); -void gfar_gstrings_normon(struct net_device *dev, u32 stringset, u8 * buf) -{ - memcpy(buf, stat_gstrings, GFAR_EXTRA_STATS_LEN * ETH_GSTRING_LEN); + for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) + stats->extra[i] = extra[i]; + } else + for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) + buf[i] = extra[i]; } -void gfar_fill_stats_normon(struct net_device *dev, - struct ethtool_stats *dummy, u64 * buf) +/* Returns the number of stats (and their corresponding strings) */ +static int gfar_stats_count(struct net_device *dev) { - int i; struct gfar_private *priv = netdev_priv(dev); - u64 *extra = (u64 *) & priv->extra_stats; - for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) { - buf[i] = extra[i]; - } + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) + return GFAR_STATS_LEN; + else + return GFAR_EXTRA_STATS_LEN; } - -int gfar_stats_count_normon(struct net_device *dev) -{ - return GFAR_EXTRA_STATS_LEN; -} /* Fills in the drvinfo structure with some basic info */ -void gfar_gdrvinfo(struct net_device *dev, struct +static void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) { strncpy(drvinfo->driver, DRV_NAME, GFAR_INFOSTR_LEN); @@ -182,7 +183,7 @@ void gfar_gdrvinfo(struct net_device *dev, struct } /* Return the current settings in the ethtool_cmd structure */ -int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) +static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) { struct gfar_private *priv = netdev_priv(dev); uint gigabit_support = @@ -216,13 +217,13 @@ int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) } /* Return the length of the register structure */ -int gfar_reglen(struct net_device *dev) +static int gfar_reglen(struct net_device *dev) { return sizeof (struct gfar); } /* Return a dump of the GFAR register space */ -void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) +static void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) { int i; struct gfar_private *priv = netdev_priv(dev); @@ -233,13 +234,6 @@ void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regb buf[i] = theregs[i]; } -/* Fill in a buffer with the strings which correspond to the - * stats */ -void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf) -{ - memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN); -} - /* Convert microseconds to ethernet clock ticks, which changes * depending on what speed the controller is running at */ static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int usecs) @@ -291,9 +285,12 @@ static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int tic /* Get the coalescing parameters, and put them in the cvals * structure. */ -int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) +static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) { struct gfar_private *priv = netdev_priv(dev); + + if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) + return -EOPNOTSUPP; cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime); cvals->rx_max_coalesced_frames = priv->rxcount; @@ -337,10 +334,13 @@ int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) * Both cvals->*_usecs and cvals->*_frames have to be > 0 * in order for coalescing to be active */ -int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) +static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) { struct gfar_private *priv = netdev_priv(dev); + if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) + return -EOPNOTSUPP; + /* Set up rx coalescing */ if ((cvals->rx_coalesce_usecs == 0) || (cvals->rx_max_coalesced_frames == 0)) @@ -379,7 +379,7 @@ int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) /* Fills in rvals with the current ring parameters. Currently, * rx, rx_mini, and rx_jumbo rings are the same size, as mini and * jumbo are ignored by the driver */ -void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals) +static void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals) { struct gfar_private *priv = netdev_priv(dev); @@ -401,9 +401,8 @@ void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals) * necessary so that we don't mess things up while we're in * motion. We wait for the ring to be clean before reallocating * the rings. */ -int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals) +static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals) { - u32 tempval; struct gfar_private *priv = netdev_priv(dev); int err = 0; @@ -425,37 +424,54 @@ int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals) return -EINVAL; } - /* Stop the controller so we don't rx any more frames */ - /* But first, make sure we clear the bits */ - tempval = gfar_read(&priv->regs->dmactrl); - tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); - gfar_write(&priv->regs->dmactrl, tempval); + if (dev->flags & IFF_UP) { + unsigned long flags; - tempval = gfar_read(&priv->regs->dmactrl); - tempval |= (DMACTRL_GRS | DMACTRL_GTS); - gfar_write(&priv->regs->dmactrl, tempval); + /* Halt TX and RX, and process the frames which + * have already been received */ + spin_lock_irqsave(&priv->lock, flags); + gfar_halt(dev); + gfar_clean_rx_ring(dev, priv->rx_ring_size); + spin_unlock_irqrestore(&priv->lock, flags); - while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))) - cpu_relax(); + /* Now we take down the rings to rebuild them */ + stop_gfar(dev); + } - /* Note that rx is not clean right now */ - priv->rxclean = 0; + /* Change the size */ + priv->rx_ring_size = rvals->rx_pending; + priv->tx_ring_size = rvals->tx_pending; - if (dev->flags & IFF_UP) { - /* Tell the driver to process the rest of the frames */ - gfar_receive(0, (void *) dev, NULL); + /* Rebuild the rings with the new size */ + if (dev->flags & IFF_UP) + err = startup_gfar(dev); - /* Now wait for it to be done */ - wait_event_interruptible(priv->rxcleanupq, priv->rxclean); + return err; +} - /* Ok, all packets have been handled. Now we bring it down, - * change the ring size, and bring it up */ +static int gfar_set_rx_csum(struct net_device *dev, uint32_t data) +{ + struct gfar_private *priv = netdev_priv(dev); + int err = 0; + if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + return -EOPNOTSUPP; + + if (dev->flags & IFF_UP) { + unsigned long flags; + + /* Halt TX and RX, and process the frames which + * have already been received */ + spin_lock_irqsave(&priv->lock, flags); + gfar_halt(dev); + gfar_clean_rx_ring(dev, priv->rx_ring_size); + spin_unlock_irqrestore(&priv->lock, flags); + + /* Now we take down the rings to rebuild them */ stop_gfar(dev); } - priv->rx_ring_size = rvals->rx_pending; - priv->tx_ring_size = rvals->tx_pending; + priv->rx_csum_enable = data; if (dev->flags & IFF_UP) err = startup_gfar(dev); @@ -463,6 +479,61 @@ int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals) return err; } +static uint32_t gfar_get_rx_csum(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + + if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + return 0; + + return priv->rx_csum_enable; +} + +static int gfar_set_tx_csum(struct net_device *dev, uint32_t data) +{ + unsigned long flags; + struct gfar_private *priv = netdev_priv(dev); + + if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + return -EOPNOTSUPP; + + spin_lock_irqsave(&priv->lock, flags); + gfar_halt(dev); + + if (data) + dev->features |= NETIF_F_IP_CSUM; + else + dev->features &= ~NETIF_F_IP_CSUM; + + gfar_start(dev); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static uint32_t gfar_get_tx_csum(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + + if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + return 0; + + return (dev->features & NETIF_F_IP_CSUM) != 0; +} + +static uint32_t gfar_get_msglevel(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + return priv->msg_enable; +} + +static void gfar_set_msglevel(struct net_device *dev, uint32_t data) +{ + struct gfar_private *priv = netdev_priv(dev); + priv->msg_enable = data; +} + + struct ethtool_ops gfar_ethtool_ops = { .get_settings = gfar_gsettings, .get_drvinfo = gfar_gdrvinfo, @@ -476,52 +547,10 @@ struct ethtool_ops gfar_ethtool_ops = { .get_strings = gfar_gstrings, .get_stats_count = gfar_stats_count, .get_ethtool_stats = gfar_fill_stats, -}; - -struct ethtool_ops gfar_normon_nocoalesce_ethtool_ops = { - .get_settings = gfar_gsettings, - .get_drvinfo = gfar_gdrvinfo, - .get_regs_len = gfar_reglen, - .get_regs = gfar_get_regs, - .get_link = ethtool_op_get_link, - .get_ringparam = gfar_gringparam, - .set_ringparam = gfar_sringparam, - .get_strings = gfar_gstrings_normon, - .get_stats_count = gfar_stats_count_normon, - .get_ethtool_stats = gfar_fill_stats_normon, -}; - -struct ethtool_ops gfar_nocoalesce_ethtool_ops = { - .get_settings = gfar_gsettings, - .get_drvinfo = gfar_gdrvinfo, - .get_regs_len = gfar_reglen, - .get_regs = gfar_get_regs, - .get_link = ethtool_op_get_link, - .get_ringparam = gfar_gringparam, - .set_ringparam = gfar_sringparam, - .get_strings = gfar_gstrings, - .get_stats_count = gfar_stats_count, - .get_ethtool_stats = gfar_fill_stats, -}; - -struct ethtool_ops gfar_normon_ethtool_ops = { - .get_settings = gfar_gsettings, - .get_drvinfo = gfar_gdrvinfo, - .get_regs_len = gfar_reglen, - .get_regs = gfar_get_regs, - .get_link = ethtool_op_get_link, - .get_coalesce = gfar_gcoalesce, - .set_coalesce = gfar_scoalesce, - .get_ringparam = gfar_gringparam, - .set_ringparam = gfar_sringparam, - .get_strings = gfar_gstrings_normon, - .get_stats_count = gfar_stats_count_normon, - .get_ethtool_stats = gfar_fill_stats_normon, -}; - -struct ethtool_ops *gfar_op_array[] = { - &gfar_ethtool_ops, - &gfar_normon_ethtool_ops, - &gfar_nocoalesce_ethtool_ops, - &gfar_normon_nocoalesce_ethtool_ops + .get_rx_csum = gfar_get_rx_csum, + .get_tx_csum = gfar_get_tx_csum, + .set_rx_csum = gfar_set_rx_csum, + .set_tx_csum = gfar_set_tx_csum, + .get_msglevel = gfar_get_msglevel, + .set_msglevel = gfar_set_msglevel, }; diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 13f11487696..3213f3e5048 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -850,7 +850,7 @@ static int pcnet32_phys_id(struct net_device *dev, u32 data) if ((!data) || (data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))) data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); - schedule_timeout(data * HZ); + msleep_interruptible(data * 1000); del_timer_sync(&lp->blink_timer); /* Restore the original value of the bcrs */ diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c index e15369c8d16..d6388e1533f 100644 --- a/drivers/net/sb1000.c +++ b/drivers/net/sb1000.c @@ -90,7 +90,6 @@ static int sb1000_close(struct net_device *dev); /* SB1000 hardware routines to be used during open/configuration phases */ -static inline void nicedelay(unsigned long usecs); static inline int card_wait_for_busy_clear(const int ioaddr[], const char* name); static inline int card_wait_for_ready(const int ioaddr[], const char* name, @@ -254,13 +253,6 @@ static struct pnp_driver sb1000_driver = { static const int TimeOutJiffies = (875 * HZ) / 100; -static inline void nicedelay(unsigned long usecs) -{ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(HZ); - return; -} - /* Card Wait For Busy Clear (cannot be used during an interrupt) */ static inline int card_wait_for_busy_clear(const int ioaddr[], const char* name) @@ -475,7 +467,7 @@ sb1000_reset(const int ioaddr[], const char* name) udelay(1000); outb(0x0, port); inb(port); - nicedelay(60000); + ssleep(1); outb(0x4, port); inb(port); udelay(1000); @@ -537,7 +529,7 @@ sb1000_activate(const int ioaddr[], const char* name) const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00}; const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00}; - nicedelay(50000); + ssleep(1); if ((status = card_send_command(ioaddr, name, Command0, st))) return status; if ((status = card_send_command(ioaddr, name, Command1, st))) @@ -944,7 +936,7 @@ sb1000_open(struct net_device *dev) /* initialize sb1000 */ if ((status = sb1000_reset(ioaddr, name))) return status; - nicedelay(200000); + ssleep(1); if ((status = sb1000_check_CRC(ioaddr, name))) return status; diff --git a/drivers/net/skfp/Makefile b/drivers/net/skfp/Makefile index 5f4bb1a6740..cb23580fcff 100644 --- a/drivers/net/skfp/Makefile +++ b/drivers/net/skfp/Makefile @@ -6,8 +6,8 @@ obj-$(CONFIG_SKFP) += skfp.o skfp-objs := skfddi.o hwmtm.o fplustm.o smt.o cfm.o \ ecm.o pcmplc.o pmf.o queue.o rmt.o \ - smtdef.o smtinit.o smttimer.o srf.o smtparse.o\ - hwt.o drvfbi.o ess.o + smtdef.o smtinit.o smttimer.o srf.o hwt.o \ + drvfbi.o ess.o # NOTE: # Compiling this driver produces some warnings (and some more are diff --git a/drivers/net/skfp/drvfbi.c b/drivers/net/skfp/drvfbi.c index 052e841ba18..5b475833f64 100644 --- a/drivers/net/skfp/drvfbi.c +++ b/drivers/net/skfp/drvfbi.c @@ -105,8 +105,8 @@ extern int AIX_vpdReadByte() ; #endif -/* Prototypes of local functions. */ -void smt_stop_watchdog(struct s_smc *smc); +/* Prototype of a local function. */ +static void smt_stop_watchdog(struct s_smc *smc); #ifdef MCA static int read_card_id() ; @@ -631,7 +631,7 @@ void plc_clear_irq(struct s_smc *smc, int p) * LED_Y_OFF just switch yellow LED off * LED_Y_ON just switch yello LED on */ -void led_indication(struct s_smc *smc, int led_event) +static void led_indication(struct s_smc *smc, int led_event) { /* use smc->hw.mac_ring_is_up == TRUE * as indication for Ring Operational @@ -764,122 +764,6 @@ void llc_recover_tx(struct s_smc *smc) #endif } -/*--------------------------- DMA init ----------------------------*/ -#ifdef ISA - -/* - * init DMA - */ -void init_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - - /* - * set cascade mode, - * clear mask bit (enable DMA cannal) - */ - if (dma > 3) { - outp(0xd6,(dma & 0x03) | 0xc0) ; - outp(0xd4, dma & 0x03) ; - } - else { - outp(0x0b,(dma & 0x03) | 0xc0) ; - outp(0x0a,dma & 0x03) ; - } -} - -/* - * disable DMA - */ -void dis_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - - /* - * set mask bit (disable DMA cannal) - */ - if (dma > 3) { - outp(0xd4,(dma & 0x03) | 0x04) ; - } - else { - outp(0x0a,(dma & 0x03) | 0x04) ; - } -} - -#endif /* ISA */ - -#ifdef EISA - -/*arrays with io addresses of dma controller length and address registers*/ -static const int cntr[8] = { 0x001,0x003,0x005,0x007,0,0x0c6,0x0ca,0x0ce } ; -static const int base[8] = { 0x000,0x002,0x004,0x006,0,0x0c4,0x0c8,0x0cc } ; -static const int page[8] = { 0x087,0x083,0x081,0x082,0,0x08b,0x089,0x08a } ; - -void init_dma(struct s_smc *smc, int dma) -{ - /* - * extended mode register - * 32 bit IO - * type c - * TC output - * disable stop - */ - - /* mode read (write) demand */ - smc->hw.dma_rmode = (dma & 3) | 0x08 | 0x0 ; - smc->hw.dma_wmode = (dma & 3) | 0x04 | 0x0 ; - - /* 32 bit IO's, burst DMA mode (type "C") */ - smc->hw.dma_emode = (dma & 3) | 0x08 | 0x30 ; - - outp((dma < 4) ? 0x40b : 0x4d6,smc->hw.dma_emode) ; - - /* disable chaining */ - outp((dma < 4) ? 0x40a : 0x4d4,(dma&3)) ; - - /*load dma controller addresses for fast access during set dma*/ - smc->hw.dma_base_word_count = cntr[smc->hw.dma]; - smc->hw.dma_base_address = base[smc->hw.dma]; - smc->hw.dma_base_address_page = page[smc->hw.dma]; - -} - -void dis_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - - outp((dma < 4) ? 0x0a : 0xd4,(dma&3)|4) ;/* mask bit */ -} -#endif /* EISA */ - -#ifdef MCA -void init_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - SK_UNUSED(dma) ; -} - -void dis_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - SK_UNUSED(dma) ; -} -#endif - -#ifdef PCI -void init_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - SK_UNUSED(dma) ; -} - -void dis_dma(struct s_smc *smc, int dma) -{ - SK_UNUSED(smc) ; - SK_UNUSED(dma) ; -} -#endif - #ifdef MULT_OEM static int is_equal_num(char comp1[], char comp2[], int num) { @@ -1407,7 +1291,7 @@ void smt_start_watchdog(struct s_smc *smc) #endif /* DEBUG */ } -void smt_stop_watchdog(struct s_smc *smc) +static void smt_stop_watchdog(struct s_smc *smc) { SK_UNUSED(smc) ; /* Make LINT happy. */ #ifndef DEBUG @@ -1422,104 +1306,6 @@ void smt_stop_watchdog(struct s_smc *smc) } #ifdef PCI -static char get_rom_byte(struct s_smc *smc, u_short addr) -{ - GET_PAGE(addr) ; - return (READ_PROM(ADDR(B2_FDP))) ; -} - -/* - * ROM image defines - */ -#define ROM_SIG_1 0 -#define ROM_SIG_2 1 -#define PCI_DATA_1 0x18 -#define PCI_DATA_2 0x19 - -/* - * PCI data structure defines - */ -#define VPD_DATA_1 0x08 -#define VPD_DATA_2 0x09 -#define IMAGE_LEN_1 0x10 -#define IMAGE_LEN_2 0x11 -#define CODE_TYPE 0x14 -#define INDICATOR 0x15 - -/* - * BEGIN_MANUAL_ENTRY(mac_drv_vpd_read) - * mac_drv_vpd_read(smc,buf,size,image) - * - * function DOWNCALL (FDDIWARE) - * reads the VPD data of the FPROM and writes it into the - * buffer - * - * para buf points to the buffer for the VPD data - * size size of the VPD data buffer - * image boot image; code type of the boot image - * image = 0 Intel x86, PC-AT compatible - * 1 OPENBOOT standard for PCI - * 2-FF reserved - * - * returns len number of VPD data bytes read form the FPROM - * <0 number of read bytes - * >0 error: data invalid - * - * END_MANUAL_ENTRY - */ -int mac_drv_vpd_read(struct s_smc *smc, char *buf, int size, char image) -{ - u_short ibase ; - u_short pci_base ; - u_short vpd ; - int len ; - - len = 0 ; - ibase = 0 ; - /* - * as long images defined - */ - while (get_rom_byte(smc,ibase+ROM_SIG_1) == 0x55 && - (u_char) get_rom_byte(smc,ibase+ROM_SIG_2) == 0xaa) { - /* - * get the pointer to the PCI data structure - */ - pci_base = ibase + get_rom_byte(smc,ibase+PCI_DATA_1) + - (get_rom_byte(smc,ibase+PCI_DATA_2) << 8) ; - - if (image == get_rom_byte(smc,pci_base+CODE_TYPE)) { - /* - * we have the right image, read the VPD data - */ - vpd = ibase + get_rom_byte(smc,pci_base+VPD_DATA_1) + - (get_rom_byte(smc,pci_base+VPD_DATA_2) << 8) ; - if (vpd == ibase) { - break ; /* no VPD data */ - } - for (len = 0; len < size; len++,buf++,vpd++) { - *buf = get_rom_byte(smc,vpd) ; - } - break ; - } - else { - /* - * try the next image - */ - if (get_rom_byte(smc,pci_base+INDICATOR) & 0x80) { - break ; /* this was the last image */ - } - ibase = ibase + get_rom_byte(smc,ibase+IMAGE_LEN_1) + - (get_rom_byte(smc,ibase+IMAGE_LEN_2) << 8) ; - } - } - - return(len) ; -} - -void mac_drv_pci_fix(struct s_smc *smc, u_long fix_value) -{ - smc->hw.pci_fix_value = fix_value ; -} void mac_do_pci_fix(struct s_smc *smc) { diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index fd39b4b2ef7..62b01328c49 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -102,7 +102,7 @@ void ess_timer_poll(struct s_smc *smc); void ess_para_change(struct s_smc *smc); int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, int fs); -int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead); +static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead); /* @@ -375,7 +375,7 @@ int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, * determines the synchronous bandwidth, set the TSYNC register and the * mib variables SBAPayload, SBAOverhead and fddiMACT-NEG. */ -int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead) +static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead) { /* * determine the synchronous bandwidth (sync_bw) in bytes per T-NEG, diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c index 76e78442fc2..a2ed47f1cc7 100644 --- a/drivers/net/skfp/fplustm.c +++ b/drivers/net/skfp/fplustm.c @@ -1117,30 +1117,6 @@ void mac_clear_multicast(struct s_smc *smc) /* BEGIN_MANUAL_ENTRY(if,func;others;2) - int mac_set_func_addr(smc,f_addr) - struct s_smc *smc ; - u_long f_addr ; - -Function DOWNCALL (SMT, fplustm.c) - Set a Token-Ring functional address, the address will - be activated after calling mac_update_multicast() - -Para f_addr functional bits in non-canonical format - -Returns 0: always success - - END_MANUAL_ENTRY() - */ -int mac_set_func_addr(struct s_smc *smc, u_long f_addr) -{ - smc->hw.fp.func_addr = f_addr ; - return(0) ; -} - - -/* - BEGIN_MANUAL_ENTRY(if,func;others;2) - int mac_add_multicast(smc,addr,can) struct s_smc *smc ; struct fddi_addr *addr ; @@ -1203,52 +1179,6 @@ int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can) } /* - BEGIN_MANUAL_ENTRY(if,func;others;2) - - void mac_del_multicast(smc,addr,can) - struct s_smc *smc ; - struct fddi_addr *addr ; - int can ; - -Function DOWNCALL (SMT, fplustm.c) - Delete an entry from the multicast table - -Para addr pointer to a multicast address - can = 0: the multicast address has the physical format - = 1: the multicast address has the canonical format - | 0x80 permanent - - END_MANUAL_ENTRY() - */ -void mac_del_multicast(struct s_smc *smc, struct fddi_addr *addr, int can) -{ - SK_LOC_DECL(struct fddi_addr,own) ; - struct s_fpmc *tb ; - - if (!(tb = mac_get_mc_table(smc,addr,&own,1,can & ~0x80))) - return ; - /* - * permanent addresses must be deleted with perm bit - * and vice versa - */ - if (( tb->perm && (can & 0x80)) || - (!tb->perm && !(can & 0x80))) { - /* - * delete it - */ - if (tb->n) { - tb->n-- ; - if (tb->perm) { - smc->hw.fp.smt_slots_used-- ; - } - else { - smc->hw.fp.os_slots_used-- ; - } - } - } -} - -/* * mode */ diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/skfp/h/cmtdef.h index 603982debc7..f2f771d8be7 100644 --- a/drivers/net/skfp/h/cmtdef.h +++ b/drivers/net/skfp/h/cmtdef.h @@ -507,7 +507,6 @@ void pcm_status_state(struct s_smc *smc, int np, int *type, int *state, int *remote, int *mac); void plc_config_mux(struct s_smc *smc, int mux); void sm_lem_evaluate(struct s_smc *smc); -void smt_clear_una_dna(struct s_smc *smc); void mac_update_counter(struct s_smc *smc); void sm_pm_ls_latch(struct s_smc *smc, int phy, int on_off); void sm_ma_control(struct s_smc *smc, int mode); @@ -541,11 +540,9 @@ void smt_timer_poll(struct s_smc *smc); u_long smt_get_time(void); u_long smt_get_tid(struct s_smc *smc); void smt_timer_done(struct s_smc *smc); -void smt_set_defaults(struct s_smc *smc); void smt_fixup_mib(struct s_smc *smc); void smt_reset_defaults(struct s_smc *smc, int level); void smt_agent_task(struct s_smc *smc); -void smt_please_reconnect(struct s_smc *smc, int reconn_time); int smt_check_para(struct s_smc *smc, struct smt_header *sm, const u_short list[]); void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr); @@ -568,7 +565,6 @@ int pcm_get_s_port(struct s_smc *smc); int pcm_rooted_station(struct s_smc *smc); int cfm_get_mac_input(struct s_smc *smc); int cfm_get_mac_output(struct s_smc *smc); -int port_to_mib(struct s_smc *smc, int p); int cem_build_path(struct s_smc *smc, char *to, int path_index); int sm_mac_get_tx_state(struct s_smc *smc); char *get_pcmstate(struct s_smc *smc, int np); @@ -580,8 +576,6 @@ void smt_send_frame(struct s_smc *smc, SMbuf *mb, int fc, int local); void smt_set_timestamp(struct s_smc *smc, u_char *p); void mac_set_rx_mode(struct s_smc *smc, int mode); int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can); -int mac_set_func_addr(struct s_smc *smc, u_long f_addr); -void mac_del_multicast(struct s_smc *smc, struct fddi_addr *addr, int can); void mac_update_multicast(struct s_smc *smc); void mac_clear_multicast(struct s_smc *smc); void set_formac_tsync(struct s_smc *smc, long sync_bw); @@ -599,7 +593,6 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd); int smt_set_mac_opvalues(struct s_smc *smc); #ifdef TAG_MODE -void mac_drv_pci_fix(struct s_smc *smc, u_long fix_value); void mac_do_pci_fix(struct s_smc *smc); void mac_drv_clear_tx_queue(struct s_smc *smc); void mac_drv_repair_descr(struct s_smc *smc); diff --git a/drivers/net/skfp/h/hwmtm.h b/drivers/net/skfp/h/hwmtm.h index 4e360af07d7..1a606d4bfe5 100644 --- a/drivers/net/skfp/h/hwmtm.h +++ b/drivers/net/skfp/h/hwmtm.h @@ -262,31 +262,6 @@ struct os_debug { (smc)->hw.fp.tx_q[queue].tx_curr_put /* - * BEGIN_MANUAL_ENTRY(HWM_TX_CHECK) - * void HWM_TX_CHECK(smc,frame_status,low_water) - * - * function MACRO (hardware module, hwmtm.h) - * This macro is invoked by the OS-specific before it left it's - * driver_send function. This macro calls mac_drv_clear_txd - * if the free TxDs of the current transmit queue is equal or - * lower than the given low water mark. - * - * para frame_status status of the frame, see design description - * low_water low water mark of free TxD's - * - * END_MANUAL_ENTRY - */ -#ifndef HWM_NO_FLOW_CTL -#define HWM_TX_CHECK(smc,frame_status,low_water) {\ - if ((low_water)>=(smc)->hw.fp.tx_q[(frame_status)&QUEUE_A0].tx_free) {\ - mac_drv_clear_txd(smc) ;\ - }\ -} -#else -#define HWM_TX_CHECK(smc,frame_status,low_water) mac_drv_clear_txd(smc) -#endif - -/* * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN) * int HWM_GET_RX_FRAG_LEN(rxd) * diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/skfp/hwmtm.c index 18d429021ed..438f424e636 100644 --- a/drivers/net/skfp/hwmtm.c +++ b/drivers/net/skfp/hwmtm.c @@ -86,6 +86,7 @@ static u_long repair_txd_ring(struct s_smc *smc, struct s_smt_tx_queue *queue); static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue); static SMbuf* get_llc_rx(struct s_smc *smc); static SMbuf* get_txd_mb(struct s_smc *smc); +static void mac_drv_clear_txd(struct s_smc *smc); /* ------------------------------------------------------------- @@ -146,7 +147,6 @@ extern int mac_drv_rx_init(struct s_smc *smc, int len, int fc, char *look_ahead, */ void process_receive(struct s_smc *smc); void fddi_isr(struct s_smc *smc); -void mac_drv_clear_txd(struct s_smc *smc); void smt_free_mbuf(struct s_smc *smc, SMbuf *mb); void init_driver_fplus(struct s_smc *smc); void mac_drv_rx_mode(struct s_smc *smc, int mode); @@ -158,7 +158,6 @@ void hwm_tx_frag(struct s_smc *smc, char far *virt, u_long phys, int len, void hwm_rx_frag(struct s_smc *smc, char far *virt, u_long phys, int len, int frame_status); -int mac_drv_rx_frag(struct s_smc *smc, void far *virt, int len); int mac_drv_init(struct s_smc *smc); int hwm_tx_init(struct s_smc *smc, u_char fc, int frag_count, int frame_len, int frame_status); @@ -1448,35 +1447,6 @@ void hwm_rx_frag(struct s_smc *smc, char far *virt, u_long phys, int len, NDD_TRACE("RHfE",r,AIX_REVERSE(r->rxd_rbadr),0) ; } -#ifndef NDIS_OS2 -/* - * BEGIN_MANUAL_ENTRY(mac_drv_rx_frag) - * int mac_drv_rx_frag(smc,virt,len) - * - * function DOWNCALL (hwmtm.c) - * mac_drv_rx_frag fills the fragment with a part of the frame. - * - * para virt the virtual address of the fragment - * len the length in bytes of the fragment - * - * return 0: success code, no errors possible - * - * END_MANUAL_ENTRY - */ -int mac_drv_rx_frag(struct s_smc *smc, void far *virt, int len) -{ - NDD_TRACE("RHSB",virt,len,smc->os.hwm.r.mb_pos) ; - - DB_RX("receive from queue: len/virt: = %d/%x",len,virt,4) ; - memcpy((char far *)virt,smc->os.hwm.r.mb_pos,len) ; - smc->os.hwm.r.mb_pos += len ; - - NDD_TRACE("RHSE",smc->os.hwm.r.mb_pos,0,0) ; - return(0) ; -} -#endif - - /* * BEGINN_MANUAL_ENTRY(mac_drv_clear_rx_queue) * @@ -1978,7 +1948,7 @@ void smt_send_mbuf(struct s_smc *smc, SMbuf *mb, int fc) * * END_MANUAL_ENTRY */ -void mac_drv_clear_txd(struct s_smc *smc) +static void mac_drv_clear_txd(struct s_smc *smc) { struct s_smt_tx_queue *queue ; struct s_smt_fp_txd volatile *t1 ; diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/skfp/pcmplc.c index 571f055c096..cd0aa4c151b 100644 --- a/drivers/net/skfp/pcmplc.c +++ b/drivers/net/skfp/pcmplc.c @@ -1861,13 +1861,6 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd) #endif } -void pcm_set_lct_short(struct s_smc *smc, int n) -{ - if (n <= 0 || n > 1000) - return ; - smc->s.lct_short = n ; -} - #ifdef DEBUG /* * fill state struct diff --git a/drivers/net/skfp/pmf.c b/drivers/net/skfp/pmf.c index f2b446d8b0b..efc639c013f 100644 --- a/drivers/net/skfp/pmf.c +++ b/drivers/net/skfp/pmf.c @@ -36,12 +36,13 @@ static int smt_authorize(struct s_smc *smc, struct smt_header *sm); static int smt_check_set_count(struct s_smc *smc, struct smt_header *sm); static const struct s_p_tab* smt_get_ptab(u_short para); static int smt_mib_phys(struct s_smc *smc); -int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index, int local, - int set); +static int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index, + int local, int set); void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para, int index, int local); static SMbuf *smt_build_pmf_response(struct s_smc *smc, struct smt_header *req, int set, int local); +static int port_to_mib(struct s_smc *smc, int p); #define MOFFSS(e) ((int)&(((struct fddi_mib *)0)->e)) #define MOFFSA(e) ((int) (((struct fddi_mib *)0)->e)) @@ -1078,8 +1079,8 @@ wrong_error: /* * set parameter */ -int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index, int local, - int set) +static int smt_set_para(struct s_smc *smc, struct smt_para *pa, int index, + int local, int set) { #define IFSET(x) if (set) (x) @@ -1549,7 +1550,7 @@ static int smt_mib_phys(struct s_smc *smc) #endif } -int port_to_mib(struct s_smc *smc, int p) +static int port_to_mib(struct s_smc *smc, int p) { #ifdef CONCENTRATOR SK_UNUSED(smc) ; diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index c88aad6edd7..4b5ed2c6317 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -149,7 +149,6 @@ extern void hwm_rx_frag(struct s_smc *smc, char far * virt, u_long phys, extern void mac_drv_rx_mode(struct s_smc *smc, int mode); extern void mac_drv_clear_rx_queue(struct s_smc *smc); extern void enable_tx_irq(struct s_smc *smc, u_short queue); -extern void mac_drv_clear_txd(struct s_smc *smc); static struct pci_device_id skfddi_pci_tbl[] = { { PCI_VENDOR_ID_SK, PCI_DEVICE_ID_SK_FP, PCI_ANY_ID, PCI_ANY_ID, }, diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c index c3a0d2f10b2..f17c05cbe44 100644 --- a/drivers/net/skfp/smt.c +++ b/drivers/net/skfp/smt.c @@ -110,7 +110,7 @@ static void smt_fill_setcount(struct s_smc *smc, struct smt_p_setcount *setcount static void smt_fill_echo(struct s_smc *smc, struct smt_p_echo *echo, u_long seed, int len); -void smt_clear_una_dna(struct s_smc *smc); +static void smt_clear_una_dna(struct s_smc *smc); static void smt_clear_old_una_dna(struct s_smc *smc); #ifdef CONCENTRATOR static int entity_to_index(void); @@ -118,7 +118,7 @@ static int entity_to_index(void); static void update_dac(struct s_smc *smc, int report); static int div_ratio(u_long upper, u_long lower); #ifdef USE_CAN_ADDR -void hwm_conv_can(struct s_smc *smc, char *data, int len); +static void hwm_conv_can(struct s_smc *smc, char *data, int len); #else #define hwm_conv_can(smc,data,len) #endif @@ -216,24 +216,6 @@ void smt_agent_task(struct s_smc *smc) DB_SMT("SMT agent task\n",0,0) ; } -void smt_please_reconnect(struct s_smc *smc, int reconn_time) -/* struct s_smc *smc; Pointer to SMT context */ -/* int reconn_time; Wait for reconnect time in seconds */ -{ - /* - * The please reconnect variable is used as a timer. - * It is decremented each time smt_event is called. - * This happens every second or when smt_force_irq is called. - * Note: smt_force_irq () is called on some packet receives and - * when a multicast address is changed. Since nothing - * is received during the disconnect and the multicast - * address changes can be viewed as not very often and - * the timer runs out close to its given value - * (reconn_time). - */ - smc->sm.please_reconnect = reconn_time ; -} - #ifndef SMT_REAL_TOKEN_CT void smt_emulate_token_ct(struct s_smc *smc, int mac_index) { @@ -1574,7 +1556,7 @@ static void smt_fill_echo(struct s_smc *smc, struct smt_p_echo *echo, u_long see * clear DNA and UNA * called from CFM if configuration changes */ -void smt_clear_una_dna(struct s_smc *smc) +static void smt_clear_una_dna(struct s_smc *smc) { smc->mib.m[MAC0].fddiMACUpstreamNbr = SMT_Unknown ; smc->mib.m[MAC0].fddiMACDownstreamNbr = SMT_Unknown ; @@ -2058,30 +2040,10 @@ int smt_action(struct s_smc *smc, int class, int code, int index) } /* - * change tneg - * set T_Req in MIB (Path Attribute) - * calculate new values for MAC - * if change required - * disconnect - * set reconnect - * end - */ -void smt_change_t_neg(struct s_smc *smc, u_long tneg) -{ - smc->mib.a[PATH0].fddiPATHMaxT_Req = tneg ; - - if (smt_set_mac_opvalues(smc)) { - RS_SET(smc,RS_EVENT) ; - smc->sm.please_reconnect = 1 ; - queue_event(smc,EVENT_ECM,EC_DISCONNECT) ; - } -} - -/* * canonical conversion of <len> bytes beginning form *data */ #ifdef USE_CAN_ADDR -void hwm_conv_can(struct s_smc *smc, char *data, int len) +static void hwm_conv_can(struct s_smc *smc, char *data, int len) { int i ; diff --git a/drivers/net/skfp/smtdef.c b/drivers/net/skfp/smtdef.c index 5a0c8db816d..4e07ff7073f 100644 --- a/drivers/net/skfp/smtdef.c +++ b/drivers/net/skfp/smtdef.c @@ -76,11 +76,6 @@ void smt_reset_defaults(struct s_smc *smc, int level); static void smt_init_mib(struct s_smc *smc, int level); static int set_min_max(int maxflag, u_long mib, u_long limit, u_long *oper); -void smt_set_defaults(struct s_smc *smc) -{ - smt_reset_defaults(smc,0) ; -} - #define MS2BCLK(x) ((x)*12500L) #define US2BCLK(x) ((x)*1250L) diff --git a/drivers/net/skfp/smtparse.c b/drivers/net/skfp/smtparse.c deleted file mode 100644 index d5779e414db..00000000000 --- a/drivers/net/skfp/smtparse.c +++ /dev/null @@ -1,467 +0,0 @@ -/****************************************************************************** - * - * (C)Copyright 1998,1999 SysKonnect, - * a business unit of Schneider & Koch & Co. Datensysteme GmbH. - * - * See the file "skfddi.c" for further information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - - -/* - parser for SMT parameters -*/ - -#include "h/types.h" -#include "h/fddi.h" -#include "h/smc.h" -#include "h/smt_p.h" - -#define KERNEL -#include "h/smtstate.h" - -#ifndef lint -static const char ID_sccs[] = "@(#)smtparse.c 1.12 98/10/06 (C) SK " ; -#endif - -#ifdef sun -#define _far -#endif - -/* - * convert to BCLK units - */ -#define MS2BCLK(x) ((x)*12500L) -#define US2BCLK(x) ((x/10)*125L) - -/* - * parameter table - */ -static struct s_ptab { - char *pt_name ; - u_short pt_num ; - u_short pt_type ; - u_long pt_min ; - u_long pt_max ; -} ptab[] = { - { "PMFPASSWD",0, 0 } , - { "USERDATA",1, 0 } , - { "LERCUTOFFA",2, 1, 4, 15 } , - { "LERCUTOFFB",3, 1, 4, 15 } , - { "LERALARMA",4, 1, 4, 15 } , - { "LERALARMB",5, 1, 4, 15 } , - { "TMAX",6, 1, 5, 165 } , - { "TMIN",7, 1, 5, 165 } , - { "TREQ",8, 1, 5, 165 } , - { "TVX",9, 1, 2500, 10000 } , -#ifdef ESS - { "SBAPAYLOAD",10, 1, 0, 1562 } , - { "SBAOVERHEAD",11, 1, 50, 5000 } , - { "MAXTNEG",12, 1, 5, 165 } , - { "MINSEGMENTSIZE",13, 1, 0, 4478 } , - { "SBACATEGORY",14, 1, 0, 0xffff } , - { "SYNCHTXMODE",15, 0 } , -#endif -#ifdef SBA - { "SBACOMMAND",16, 0 } , - { "SBAAVAILABLE",17, 1, 0, 100 } , -#endif - { NULL } -} ; - -/* Define maximum string size for values and keybuffer */ -#define MAX_VAL 40 - -/* - * local function declarations - */ -static u_long parse_num(int type, char _far *value, char *v, u_long mn, - u_long mx, int scale); -static int parse_word(char *buf, char _far *text); - -#ifdef SIM -#define DB_MAIN(a,b,c) printf(a,b,c) -#else -#define DB_MAIN(a,b,c) -#endif - -/* - * BEGIN_MANUAL_ENTRY() - * - * int smt_parse_arg(struct s_smc *,char _far *keyword,int type, - char _far *value) - * - * parse SMT parameter - * *keyword - * pointer to keyword, must be \0, \n or \r terminated - * *value pointer to value, either char * or u_long * - * if char * - * pointer to value, must be \0, \n or \r terminated - * if u_long * - * contains binary value - * - * type 0: integer - * 1: string - * return - * 0 parameter parsed ok - * != 0 error - * NOTE: - * function can be called with DS != SS - * - * - * END_MANUAL_ENTRY() - */ -int smt_parse_arg(struct s_smc *smc, char _far *keyword, int type, - char _far *value) -{ - char keybuf[MAX_VAL+1]; - char valbuf[MAX_VAL+1]; - char c ; - char *p ; - char *v ; - char *d ; - u_long val = 0 ; - struct s_ptab *pt ; - int st ; - int i ; - - /* - * parse keyword - */ - if ((st = parse_word(keybuf,keyword))) - return(st) ; - /* - * parse value if given as string - */ - if (type == 1) { - if ((st = parse_word(valbuf,value))) - return(st) ; - } - /* - * search in table - */ - st = 0 ; - for (pt = ptab ; (v = pt->pt_name) ; pt++) { - for (p = keybuf ; (c = *p) ; p++,v++) { - if (c != *v) - break ; - } - if (!c && !*v) - break ; - } - if (!v) - return(-1) ; -#if 0 - printf("=>%s<==>%s<=\n",pt->pt_name,valbuf) ; -#endif - /* - * set value in MIB - */ - if (pt->pt_type) - val = parse_num(type,value,valbuf,pt->pt_min,pt->pt_max,1) ; - switch (pt->pt_num) { - case 0 : - v = valbuf ; - d = (char *) smc->mib.fddiPRPMFPasswd ; - for (i = 0 ; i < (signed)sizeof(smc->mib.fddiPRPMFPasswd) ; i++) - *d++ = *v++ ; - DB_MAIN("SET %s = %s\n",pt->pt_name,smc->mib.fddiPRPMFPasswd) ; - break ; - case 1 : - v = valbuf ; - d = (char *) smc->mib.fddiSMTUserData ; - for (i = 0 ; i < (signed)sizeof(smc->mib.fddiSMTUserData) ; i++) - *d++ = *v++ ; - DB_MAIN("SET %s = %s\n",pt->pt_name,smc->mib.fddiSMTUserData) ; - break ; - case 2 : - smc->mib.p[PA].fddiPORTLer_Cutoff = (u_char) val ; - DB_MAIN("SET %s = %d\n", - pt->pt_name,smc->mib.p[PA].fddiPORTLer_Cutoff) ; - break ; - case 3 : - smc->mib.p[PB].fddiPORTLer_Cutoff = (u_char) val ; - DB_MAIN("SET %s = %d\n", - pt->pt_name,smc->mib.p[PB].fddiPORTLer_Cutoff) ; - break ; - case 4 : - smc->mib.p[PA].fddiPORTLer_Alarm = (u_char) val ; - DB_MAIN("SET %s = %d\n", - pt->pt_name,smc->mib.p[PA].fddiPORTLer_Alarm) ; - break ; - case 5 : - smc->mib.p[PB].fddiPORTLer_Alarm = (u_char) val ; - DB_MAIN("SET %s = %d\n", - pt->pt_name,smc->mib.p[PB].fddiPORTLer_Alarm) ; - break ; - case 6 : /* TMAX */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.a[PATH0].fddiPATHT_MaxLowerBound = - (u_long) -MS2BCLK((long)val) ; - break ; - case 7 : /* TMIN */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.m[MAC0].fddiMACT_Min = - (u_long) -MS2BCLK((long)val) ; - break ; - case 8 : /* TREQ */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.a[PATH0].fddiPATHMaxT_Req = - (u_long) -MS2BCLK((long)val) ; - break ; - case 9 : /* TVX */ - DB_MAIN("SET %s = %d \n",pt->pt_name,val) ; - smc->mib.a[PATH0].fddiPATHTVXLowerBound = - (u_long) -US2BCLK((long)val) ; - break ; -#ifdef ESS - case 10 : /* SBAPAYLOAD */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - if (smc->mib.fddiESSPayload != val) { - smc->ess.raf_act_timer_poll = TRUE ; - smc->mib.fddiESSPayload = val ; - } - break ; - case 11 : /* SBAOVERHEAD */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.fddiESSOverhead = val ; - break ; - case 12 : /* MAXTNEG */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.fddiESSMaxTNeg = (u_long) -MS2BCLK((long)val) ; - break ; - case 13 : /* MINSEGMENTSIZE */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.fddiESSMinSegmentSize = val ; - break ; - case 14 : /* SBACATEGORY */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.fddiESSCategory = - (smc->mib.fddiESSCategory & 0xffff) | - ((u_long)(val << 16)) ; - break ; - case 15 : /* SYNCHTXMODE */ - /* do not use memcmp(valbuf,"ALL",3) because DS != SS */ - if (valbuf[0] == 'A' && valbuf[1] == 'L' && valbuf[2] == 'L') { - smc->mib.fddiESSSynchTxMode = TRUE ; - DB_MAIN("SET %s = %s\n",pt->pt_name,valbuf) ; - } - /* if (!memcmp(valbuf,"SPLIT",5)) { */ - if (valbuf[0] == 'S' && valbuf[1] == 'P' && valbuf[2] == 'L' && - valbuf[3] == 'I' && valbuf[4] == 'T') { - DB_MAIN("SET %s = %s\n",pt->pt_name,valbuf) ; - smc->mib.fddiESSSynchTxMode = FALSE ; - } - break ; -#endif -#ifdef SBA - case 16 : /* SBACOMMAND */ - /* if (!memcmp(valbuf,"START",5)) { */ - if (valbuf[0] == 'S' && valbuf[1] == 'T' && valbuf[2] == 'A' && - valbuf[3] == 'R' && valbuf[4] == 'T') { - DB_MAIN("SET %s = %s\n",pt->pt_name,valbuf) ; - smc->mib.fddiSBACommand = SB_START ; - } - /* if (!memcmp(valbuf,"STOP",4)) { */ - if (valbuf[0] == 'S' && valbuf[1] == 'T' && valbuf[2] == 'O' && - valbuf[3] == 'P') { - DB_MAIN("SET %s = %s\n",pt->pt_name,valbuf) ; - smc->mib.fddiSBACommand = SB_STOP ; - } - break ; - case 17 : /* SBAAVAILABLE */ - DB_MAIN("SET %s = %d\n",pt->pt_name,val) ; - smc->mib.fddiSBAAvailable = (u_char) val ; - break ; -#endif - } - return(0) ; -} - -static int parse_word(char *buf, char _far *text) -{ - char c ; - char *p ; - int p_len ; - int quote ; - int i ; - int ok ; - - /* - * skip leading white space - */ - p = buf ; - for (i = 0 ; i < MAX_VAL ; i++) - *p++ = 0 ; - p = buf ; - p_len = 0 ; - ok = 0 ; - while ( (c = *text++) && (c != '\n') && (c != '\r')) { - if ((c != ' ') && (c != '\t')) { - ok = 1 ; - break ; - } - } - if (!ok) - return(-1) ; - if (c == '"') { - quote = 1 ; - } - else { - quote = 0 ; - text-- ; - } - /* - * parse valbuf - */ - ok = 0 ; - while (!ok && p_len < MAX_VAL-1 && (c = *text++) && (c != '\n') - && (c != '\r')) { - switch (quote) { - case 0 : - if ((c == ' ') || (c == '\t') || (c == '=')) { - ok = 1 ; - break ; - } - *p++ = c ; - p_len++ ; - break ; - case 2 : - *p++ = c ; - p_len++ ; - quote = 1 ; - break ; - case 1 : - switch (c) { - case '"' : - ok = 1 ; - break ; - case '\\' : - quote = 2 ; - break ; - default : - *p++ = c ; - p_len++ ; - } - } - } - *p++ = 0 ; - for (p = buf ; (c = *p) ; p++) { - if (c >= 'a' && c <= 'z') - *p = c + 'A' - 'a' ; - } - return(0) ; -} - -static u_long parse_num(int type, char _far *value, char *v, u_long mn, - u_long mx, int scale) -{ - u_long x = 0 ; - char c ; - - if (type == 0) { /* integer */ - u_long _far *l ; - u_long u1 ; - - l = (u_long _far *) value ; - u1 = *l ; - /* - * if the value is negative take the lower limit - */ - if ((long)u1 < 0) { - if (- ((long)u1) > (long) mx) { - u1 = 0 ; - } - else { - u1 = (u_long) - ((long)u1) ; - } - } - x = u1 ; - } - else { /* string */ - int sign = 0 ; - - if (*v == '-') { - sign = 1 ; - } - while ((c = *v++) && (c >= '0') && (c <= '9')) { - x = x * 10 + c - '0' ; - } - if (scale == 10) { - x *= 10 ; - if (c == '.') { - if ((c = *v++) && (c >= '0') && (c <= '9')) { - x += c - '0' ; - } - } - } - if (sign) - x = (u_long) - ((long)x) ; - } - /* - * if the value is negative - * and the absolute value is outside the limits - * take the lower limit - * else - * take the absoute value - */ - if ((long)x < 0) { - if (- ((long)x) > (long) mx) { - x = 0 ; - } - else { - x = (u_long) - ((long)x) ; - } - } - if (x < mn) - return(mn) ; - else if (x > mx) - return(mx) ; - return(x) ; -} - -#if 0 -struct s_smc SMC ; -main() -{ - char *p ; - char *v ; - char buf[100] ; - int toggle = 0 ; - - while (gets(buf)) { - p = buf ; - while (*p && ((*p == ' ') || (*p == '\t'))) - p++ ; - - while (*p && ((*p != ' ') && (*p != '\t'))) - p++ ; - - v = p ; - while (*v && ((*v == ' ') || (*v == '\t'))) - v++ ; - if ((*v >= '0') && (*v <= '9')) { - toggle = !toggle ; - if (toggle) { - u_long l ; - l = atol(v) ; - smt_parse_arg(&SMC,buf,0,(char _far *)&l) ; - } - else - smt_parse_arg(&SMC,buf,1,(char _far *)p) ; - } - else { - smt_parse_arg(&SMC,buf,1,(char _far *)p) ; - } - } - exit(0) ; -} -#endif - diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index fd80048f7f7..cfb9d3cdb04 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -315,15 +315,25 @@ static void smc_reset(struct net_device *dev) struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; unsigned int ctl, cfg; + struct sk_buff *pending_skb; DBG(2, "%s: %s\n", dev->name, __FUNCTION__); - /* Disable all interrupts */ + /* Disable all interrupts, block TX tasklet */ spin_lock(&lp->lock); SMC_SELECT_BANK(2); SMC_SET_INT_MASK(0); + pending_skb = lp->pending_tx_skb; + lp->pending_tx_skb = NULL; spin_unlock(&lp->lock); + /* free any pending tx skb */ + if (pending_skb) { + dev_kfree_skb(pending_skb); + lp->stats.tx_errors++; + lp->stats.tx_aborted_errors++; + } + /* * This resets the registers mostly to defaults, but doesn't * affect EEPROM. That seems unnecessary @@ -389,14 +399,6 @@ static void smc_reset(struct net_device *dev) SMC_SELECT_BANK(2); SMC_SET_MMU_CMD(MC_RESET); SMC_WAIT_MMU_BUSY(); - - /* clear anything saved */ - if (lp->pending_tx_skb != NULL) { - dev_kfree_skb (lp->pending_tx_skb); - lp->pending_tx_skb = NULL; - lp->stats.tx_errors++; - lp->stats.tx_aborted_errors++; - } } /* @@ -440,6 +442,7 @@ static void smc_shutdown(struct net_device *dev) { struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; + struct sk_buff *pending_skb; DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__); @@ -447,7 +450,11 @@ static void smc_shutdown(struct net_device *dev) spin_lock(&lp->lock); SMC_SELECT_BANK(2); SMC_SET_INT_MASK(0); + pending_skb = lp->pending_tx_skb; + lp->pending_tx_skb = NULL; spin_unlock(&lp->lock); + if (pending_skb) + dev_kfree_skb(pending_skb); /* and tell the card to stay away from that nasty outside world */ SMC_SELECT_BANK(0); @@ -627,7 +634,12 @@ static void smc_hardware_send_pkt(unsigned long data) } skb = lp->pending_tx_skb; + if (unlikely(!skb)) { + smc_special_unlock(&lp->lock); + return; + } lp->pending_tx_skb = NULL; + packet_no = SMC_GET_AR(); if (unlikely(packet_no & AR_FAILED)) { printk("%s: Memory allocation failed.\n", dev->name); @@ -702,7 +714,6 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) DBG(3, "%s: %s\n", dev->name, __FUNCTION__); BUG_ON(lp->pending_tx_skb != NULL); - lp->pending_tx_skb = skb; /* * The MMU wants the number of pages to be the number of 256 bytes @@ -718,7 +729,6 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) numPages = ((skb->len & ~1) + (6 - 1)) >> 8; if (unlikely(numPages > 7)) { printk("%s: Far too big packet error.\n", dev->name); - lp->pending_tx_skb = NULL; lp->stats.tx_errors++; lp->stats.tx_dropped++; dev_kfree_skb(skb); @@ -745,6 +755,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) smc_special_unlock(&lp->lock); + lp->pending_tx_skb = skb; if (!poll_count) { /* oh well, wait until the chip finds memory later */ netif_stop_queue(dev); @@ -1062,7 +1073,7 @@ static void smc_phy_powerdown(struct net_device *dev) above). linkwatch_event() also wants the netlink semaphore. */ while(lp->work_pending) - schedule(); + yield(); bmcr = smc_phy_read(dev, phy, MII_BMCR); smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); @@ -1606,14 +1617,8 @@ static int smc_close(struct net_device *dev) /* clear everything */ smc_shutdown(dev); - + tasklet_kill(&lp->tx_task); smc_phy_powerdown(dev); - - if (lp->pending_tx_skb) { - dev_kfree_skb(lp->pending_tx_skb); - lp->pending_tx_skb = NULL; - } - return 0; } diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c index 6e5ade99a38..97712c3c4e0 100644 --- a/drivers/net/tokenring/lanstreamer.c +++ b/drivers/net/tokenring/lanstreamer.c @@ -455,8 +455,7 @@ static int streamer_reset(struct net_device *dev) writew(readw(streamer_mmio + BCTL) | BCTL_SOFTRESET, streamer_mmio + BCTL); t = jiffies; /* Hold soft reset bit for a while */ - current->state = TASK_UNINTERRUPTIBLE; - schedule_timeout(HZ); + ssleep(1); writew(readw(streamer_mmio + BCTL) & ~BCTL_SOFTRESET, streamer_mmio + BCTL); @@ -512,8 +511,7 @@ static int streamer_reset(struct net_device *dev) writew(SISR_MI, streamer_mmio + SISR_MASK_SUM); while (!((readw(streamer_mmio + SISR)) & SISR_SRB_REPLY)) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(HZ/10); + msleep_interruptible(100); if (jiffies - t > 40 * HZ) { printk(KERN_ERR "IBM PCI tokenring card not responding\n"); diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index cfc346e72d6..08e0f80f89d 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -242,6 +242,7 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ + { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, tulip_pci_tbl); @@ -1756,11 +1757,19 @@ static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); - if (dev && netif_running (dev) && netif_device_present (dev)) { - netif_device_detach (dev); - tulip_down (dev); - /* pci_power_off(pdev, -1); */ - } + if (!dev) + return -EINVAL; + + if (netif_running(dev)) + tulip_down(dev); + + netif_device_detach(dev); + free_irq(dev->irq, dev); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; } @@ -1768,15 +1777,26 @@ static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) static int tulip_resume(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); + int retval; - if (dev && netif_running (dev) && !netif_device_present (dev)) { -#if 1 - pci_enable_device (pdev); -#endif - /* pci_power_on(pdev); */ - tulip_up (dev); - netif_device_attach (dev); + if (!dev) + return -EINVAL; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + pci_enable_device(pdev); + + if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev))) { + printk (KERN_ERR "tulip: request_irq failed in resume\n"); + return retval; } + + netif_device_attach(dev); + + if (netif_running(dev)) + tulip_up(dev); + return 0; } diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 6200cfc4244..be1c1047b9b 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1398,7 +1398,7 @@ static void rhine_tx(struct net_device *dev) while (rp->dirty_tx != rp->cur_tx) { txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status); if (debug > 6) - printk(KERN_DEBUG " Tx scavenge %d status %8.8x.\n", + printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n", entry, txstatus); if (txstatus & DescOwn) break; @@ -1469,7 +1469,7 @@ static void rhine_rx(struct net_device *dev) int data_size = desc_status >> 16; if (debug > 4) - printk(KERN_DEBUG " rhine_rx() status is %8.8x.\n", + printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", desc_status); if (--boguscnt < 0) break; @@ -1487,7 +1487,7 @@ static void rhine_rx(struct net_device *dev) } else if (desc_status & RxErr) { /* There was a error. */ if (debug > 2) - printk(KERN_DEBUG " rhine_rx() Rx " + printk(KERN_DEBUG "rhine_rx() Rx " "error was %8.8x.\n", desc_status); rp->stats.rx_errors++; diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 7575b799ce5..7217d44e885 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -981,6 +981,7 @@ fst_issue_cmd(struct fst_port_info *port, unsigned short cmd) /* Wait for any previous command to complete */ while (mbval > NAK) { spin_unlock_irqrestore(&card->card_lock, flags); + set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(1); spin_lock_irqsave(&card->card_lock, flags); diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 180968899ca..c12648d8192 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -900,7 +900,7 @@ typedef struct aironet_ioctl { unsigned char __user *data; // d-data } aironet_ioctl; -static char *swversion = "2.1"; +static char swversion[] = "2.1"; #endif /* CISCO_EXT */ #define NUM_MODULES 2 diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index b1078baa1d5..aabcdc2be05 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -46,382 +46,9 @@ * under either the MPL or the GPL. */ /* - * v0.01 -> v0.02 - 21/3/2001 - Jean II - * o Allow to use regular ethX device name instead of dldwdX - * o Warning on IBSS with ESSID=any for firmware 6.06 - * o Put proper range.throughput values (optimistic) - * o IWSPY support (IOCTL and stat gather in Rx path) - * o Allow setting frequency in Ad-Hoc mode - * o Disable WEP setting if !has_wep to work on old firmware - * o Fix txpower range - * o Start adding support for Samsung/Compaq firmware - * - * v0.02 -> v0.03 - 23/3/2001 - Jean II - * o Start adding Symbol support - need to check all that - * o Fix Prism2/Symbol WEP to accept 128 bits keys - * o Add Symbol WEP (add authentication type) - * o Add Prism2/Symbol rate - * o Add PM timeout (holdover duration) - * o Enable "iwconfig eth0 key off" and friends (toggle flags) - * o Enable "iwconfig eth0 power unicast/all" (toggle flags) - * o Try with an Intel card. It report firmware 1.01, behave like - * an antiquated firmware, however on windows it says 2.00. Yuck ! - * o Workaround firmware bug in allocate buffer (Intel 1.01) - * o Finish external renaming to orinoco... - * o Testing with various Wavelan firmwares - * - * v0.03 -> v0.04 - 30/3/2001 - Jean II - * o Update to Wireless 11 -> add retry limit/lifetime support - * o Tested with a D-Link DWL 650 card, fill in firmware support - * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot) - * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-( - * It works on D-Link *only* after a tcpdump. Weird... - * And still doesn't work on Intel card. Grrrr... - * o Update the mode after a setport3 - * o Add preamble setting for Symbol cards (not yet enabled) - * o Don't complain as much about Symbol cards... - * - * v0.04 -> v0.04b - 22/4/2001 - David Gibson - * o Removed the 'eth' parameter - always use ethXX as the - * interface name instead of dldwdXX. The other was racy - * anyway. - * o Clean up RID definitions in hermes.h, other cleanups - * - * v0.04b -> v0.04c - 24/4/2001 - Jean II - * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card - * with vendor 02 and firmware 0.08. Added in the capabilities... - * o Tested Lucent firmware 7.28, everything works... - * - * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt - * o Spin-off Pcmcia code. This file is renamed orinoco.c, - * and orinoco_cs.c now contains only the Pcmcia specific stuff - * o Add Airport driver support on top of orinoco.c (see airport.c) - * - * v0.05 -> v0.05a - 4/5/2001 - Jean II - * o Revert to old Pcmcia code to fix breakage of Ben's changes... - * - * v0.05a -> v0.05b - 4/5/2001 - Jean II - * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V - * o D-Link firmware doesn't support multicast. We just print a few - * error messages, but otherwise everything works... - * o For David : set/getport3 works fine, just upgrade iwpriv... - * - * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt - * o Adapt airport.c to latest changes in orinoco.c - * o Remove deferred power enabling code - * - * v0.05c -> v0.05d - 5/5/2001 - Jean II - * o Workaround to SNAP decapsulate frame from Linksys AP - * original patch from : Dong Liu <dliu AT research.bell-labs.com> - * (note : the memcmp bug was mine - fixed) - * o Remove set_retry stuff, no firmware support it (bloat--). - * - * v0.05d -> v0.06 - 25/5/2001 - Jean II - * Original patch from "Hong Lin" <alin AT redhat.com>, - * "Ian Kinner" <ikinner AT redhat.com> - * and "David Smith" <dsmith AT redhat.com> - * o Init of priv->tx_rate_ctrl in firmware specific section. - * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh ! - * o Spectrum card always need cor_reset (for every reset) - * o Fix cor_reset to not lose bit 7 in the register - * o flush_stale_links to remove zombie Pcmcia instances - * o Ack previous hermes event before reset - * Me (with my little hands) - * o Allow orinoco.c to call cor_reset via priv->card_reset_handler - * o Add priv->need_card_reset to toggle this feature - * o Fix various buglets when setting WEP in Symbol firmware - * Now, encryption is fully functional on Symbol cards. Youpi ! - * - * v0.06 -> v0.06b - 25/5/2001 - Jean II - * o IBSS on Symbol use port_mode = 4. Please don't ask... - * - * v0.06b -> v0.06c - 29/5/2001 - Jean II - * o Show first spy address in /proc/net/wireless for IBSS mode as well - * - * v0.06c -> v0.06d - 6/7/2001 - David Gibson - * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus' - * wishes to reduce the number of unnecessary messages. - * o Removed bogus message on CRC error. - * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn - * <willwaghorn AT yahoo.co.uk> - * o Slight cleanup/re-arrangement of firmware detection code. - * - * v0.06d -> v0.06e - 1/8/2001 - David Gibson - * o Removed some redundant global initializers (orinoco_cs.c). - * o Added some module metadata - * - * v0.06e -> v0.06f - 14/8/2001 - David Gibson - * o Wording fix to license - * o Added a 'use_alternate_encaps' module parameter for APs which need an - * oui of 00:00:00. We really need a better way of handling this, but - * the module flag is better than nothing for now. - * - * v0.06f -> v0.07 - 20/8/2001 - David Gibson - * o Removed BAP error retries from hermes_bap_seek(). For Tx we now - * let the upper layers handle the retry, we retry explicitly in the - * Rx path, but don't make as much noise about it. - * o Firmware detection cleanups. - * - * v0.07 -> v0.07a - 1/10/3001 - Jean II - * o Add code to read Symbol firmware revision, inspired by latest code - * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee ! - * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me - * a 3Com card with a recent firmware, fill out Symbol firmware - * capabilities of latest rev (2.20), as well as older Symbol cards. - * o Disable Power Management in newer Symbol firmware, the API - * has changed (documentation needed). - * - * v0.07a -> v0.08 - 3/10/2001 - David Gibson - * o Fixed a possible buffer overrun found by the Stanford checker (in - * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not - * a big problem. - * o Turned has_big_wep on for Intersil cards. That's not true for all of - * them but we should at least let the capable ones try. - * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I - * realized that my assumption that the driver's serialization - * would prevent the BAP being busy on entry was possibly false, because - * things other than seeks may make the BAP busy. - * o Use "alternate" (oui 00:00:00) encapsulation by default. - * Setting use_old_encaps will mimic the old behaviour, but I think we - * will be able to eliminate this. - * o Don't try to make __initdata const (the version string). This can't - * work because of the way the __initdata sectioning works. - * o Added MODULE_LICENSE tags. - * o Support for PLX (transparent PCMCIA->PCI bridge) cards. - * o Changed to using the new type-fascist min/max. - * - * v0.08 -> v0.08a - 9/10/2001 - David Gibson - * o Inserted some missing acknowledgements/info into the Changelog. - * o Fixed some bugs in the normalization of signal level reporting. - * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware, - * which led to an instant crash on big-endian machines. - * - * v0.08a -> v0.08b - 20/11/2001 - David Gibson - * o Lots of cleanup and bugfixes in orinoco_plx.c - * o Cleanup to handling of Tx rate setting. - * o Removed support for old encapsulation method. - * o Removed old "dldwd" names. - * o Split RID constants into a new file hermes_rid.h - * o Renamed RID constants to match linux-wlan-ng and prism2.o - * o Bugfixes in hermes.c - * o Poke the PLX's INTCSR register, so it actually starts - * generating interrupts. These cards might actually work now. - * o Update to wireless extensions v12 (Jean II) - * o Support for tallies and inquire command (Jean II) - * o Airport updates for newer PPC kernels (BenH) - * - * v0.08b -> v0.09 - 21/12/2001 - David Gibson - * o Some new PCI IDs for PLX cards. - * o Removed broken attempt to do ALLMULTI reception. Just use - * promiscuous mode instead - * o Preliminary work for list-AP (Jean II) - * o Airport updates from (BenH) - * o Eliminated racy hw_ready stuff - * o Fixed generation of fake events in irq handler. This should - * finally kill the EIO problems (Jean II & dgibson) - * o Fixed breakage of bitrate set/get on Agere firmware (Jean II) - * - * v0.09 -> v0.09a - 2/1/2002 - David Gibson - * o Fixed stupid mistake in multicast list handling, triggering - * a BUG() - * - * v0.09a -> v0.09b - 16/1/2002 - David Gibson - * o Fixed even stupider mistake in new interrupt handling, which - * seriously broke things on big-endian machines. - * o Removed a bunch of redundant includes and exports. - * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c - * o Don't attempt to do hardware level multicast reception on - * Intersil firmware, just go promisc instead. - * o Typo fixed in hermes_issue_cmd() - * o Eliminated WIRELESS_SPY #ifdefs - * o Status code reported on Tx exceptions - * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC - * interrupts, which should fix the timeouts we're seeing. - * - * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson - * o Removed nested structures used for header parsing, so the - * driver should now work without hackery on ARM - * o Fix for WEP handling on Intersil (Hawk Newton) - * o Eliminated the /proc/hermes/ethXX/regs debugging file. It - * was never very useful. - * o Make Rx errors less noisy. - * - * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson - * o Laid the groundwork in hermes.[ch] for devices which map - * into PCI memory space rather than IO space. - * o Fixed bug in multicast handling (cleared multicast list when - * leaving promiscuous mode). - * o Relegated Tx error messages to debug. - * o Cleaned up / corrected handling of allocation lengths. - * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc). - * o Change to using alloc_etherdev() for structure allocations. - * o Check for and drop undersized packets. - * o Fixed a race in stopping/waking the queue. This should fix - * the timeout problems (Pavel Roskin) - * o Reverted to netif_wake_queue() on the ALLOC event. - * o Fixes for recent Symbol firmwares which lack AP density - * (Pavel Roskin). - * - * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson - * o Handle different register spacing, necessary for Prism 2.5 - * PCI adaptors (Steve Hill). - * o Cleaned up initialization of card structures in orinoco_cs - * and airport. Removed card->priv field. - * o Make response structure optional for hermes_docmd_wait() - * Pavel Roskin) - * o Added PCI id for Nortel emobility to orinoco_plx.c. - * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin) - * o Cleanups to firmware capability detection. - * o Arrange for orinoco_pci.c to override firmware detection. - * We should be able to support the PCI Intersil cards now. - * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin). - * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni - * Malinen). - * o Makefile changes for better integration into David Hinds - * pcmcia-cs package. - * - * v0.11a -> v0.11b - 1 May 2002 - David Gibson - * o Better error reporting in orinoco_plx_init_one() - * o Fixed multiple bad kfree() bugs introduced by the - * alloc_orinocodev() changes. - * - * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson - * o Support changing the MAC address. - * o Correct display of Intersil firmware revision numbers. - * o Entirely revised locking scheme. Should be both simpler and - * better. - * o Merged some common code in orinoco_plx, orinoco_pci and - * airport by creating orinoco_default_{open,stop,reset}() - * which are used as the dev->open, dev->stop, priv->reset - * callbacks if none are specified when alloc_orinocodev() is - * called. - * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt(). - * They didn't do anything. - * - * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson - * o Some rearrangement of code. - * o Numerous fixups to locking and rest handling, particularly - * for PCMCIA. - * o This allows open and stop net_device methods to be in - * orinoco.c now, rather than in the init modules. - * o In orinoco_cs.c link->priv now points to the struct - * net_device not to the struct orinoco_private. - * o Added a check for undersized SNAP frames, which could cause - * crashes. - * - * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson - * o Fix hw->num_init testing code, so num_init is actually - * incremented. - * o Fix very stupid bug in orinoco_cs which broke compile with - * CONFIG_SMP. - * o Squashed a warning. - * - * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson - * o Change to C9X style designated initializers. - * o Add support for 3Com AirConnect PCI. - * o No longer ignore the hard_reset argument to - * alloc_orinocodev(). Oops. - * - * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson - * o Revert the broken 0.12* locking scheme and go to a new yet - * simpler scheme. - * o Do firmware resets only in orinoco_init() and when waking - * the card from hard sleep. - * - * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson - * o Re-introduced full resets (via schedule_task()) on Tx - * timeout. - * - * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson - * o Minor cleanups to info frame handling. Add basic support - * for linkstatus info frames. - * o Include required kernel headers in orinoco.h, to avoid - * compile problems. - * - * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson - * o Implemented hard reset for Airport cards - * o Experimental suspend/resume implementation for orinoco_pci - * o Abolished /proc debugging support, replaced with a debugging - * iwpriv. Now it's ugly and simple instead of ugly and complex. - * o Bugfix in hermes.c if the firmware returned a record length - * of 0, we could go clobbering memory. - * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable - * was set, which was usually true on PCMCIA hot removes. - * o Track LINKSTATUS messages, silently drop Tx packets before - * we are connected (avoids confusing the firmware), and only - * give LINKSTATUS printk()s if the status has changed. - * - * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson - * o Cleanup: use dev instead of priv in various places. - * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event - * if we're in the middle of a (driver initiated) hard reset. - * o Bug fix: ETH_ZLEN is supposed to include the header - * (Dionysus Blazakis & Manish Karir) - * o Convert to using workqueues instead of taskqueues (and - * backwards compatibility macros for pre 2.5.41 kernels). - * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in - * airport.c - * o New orinoco_tmd.c init module from Joerg Dorchain for - * TMD7160 based PCI to PCMCIA bridges (similar to - * orinoco_plx.c). - * - * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson - * o Make hw_unavailable a counter, rather than just a flag, this - * is necessary to avoid some races (such as a card being - * removed in the middle of orinoco_reset(). - * o Restore Release/RequestConfiguration in the PCMCIA event handler - * when dealing with a driver initiated hard reset. This is - * necessary to prevent hangs due to a spurious interrupt while - * the reset is in progress. - * o Clear the 802.11 header when transmitting, even though we - * don't use it. This fixes a long standing bug on some - * firmwares, which seem to get confused if that isn't done. - * o Be less eager to de-encapsulate SNAP frames, only do so if - * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old - * behaviour broke CDP (Cisco Discovery Protocol). - * o Use dev instead of priv for free_irq() as well as - * request_irq() (oops). - * o Attempt to reset rather than giving up if we get too many - * IRQs. - * o Changed semantics of __orinoco_down() so it can be called - * safely with hw_unavailable set. It also now clears the - * linkstatus (since we're going to have to reassociate). - * - * v0.13d -> v0.13e - 12 May 2003 - David Gibson - * o Support for post-2.5.68 return values from irq handler. - * o Fixed bug where underlength packets would be double counted - * in the rx_dropped statistics. - * o Provided a module parameter to suppress linkstatus messages. - * - * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson - * o Replaced priv->connected logic with netif_carrier_on/off() - * calls. - * o Remove has_ibss_any and never set the CREATEIBSS RID when - * the ESSID is empty. Too many firmwares break if we do. - * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove - * __devinitdata from PCI ID tables, use free_netdev(). - * o Enabled shared-key authentication for Agere firmware (from - * Robert J. Moore <Robert.J.Moore AT allanbank.com> - * o Move netif_wake_queue() (back) to the Tx completion from the - * ALLOC event. This seems to prevent/mitigate the rolling - * error -110 problems at least on some Intersil firmwares. - * Theoretically reduces performance, but I can't measure it. - * Patch from Andrew Tridgell <tridge AT samba.org> - * - * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson - * o Correctly turn off shared-key authentication when requested - * (bugfix from Robert J. Moore). - * o Correct airport sleep interfaces for current 2.6 kernels. - * o Add code for key change without disabling/enabling the MAC - * port. This is supposed to allow 802.1x to work sanely, but - * doesn't seem to yet. - * * TODO - * o New wireless extensions API (patch from Moustafa - * Youssef, updated by Jim Carter and Pavel Roskin). * o Handle de-encapsulation within network layer, provide 802.11 * headers (patch from Thomas 'Dent' Mirlacher) - * o RF monitor mode support * o Fix possible races in SPY handling. * o Disconnect wireless extensions from fundamental configuration. * o (maybe) Software WEP support (patch from Stano Meduna). @@ -462,7 +89,10 @@ #include <linux/netdevice.h> #include <linux/if_arp.h> #include <linux/etherdevice.h> +#include <linux/ethtool.h> #include <linux/wireless.h> +#include <net/iw_handler.h> +#include <net/ieee80211.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -496,6 +126,10 @@ static int ignore_disconnect; /* = 0 */ module_param(ignore_disconnect, int, 0644); MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); +static int force_monitor; /* = 0 */ +module_param(force_monitor, int, 0644); +MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); + /********************************************************************/ /* Compile time configuration and compatibility stuff */ /********************************************************************/ @@ -511,6 +145,10 @@ MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer /* Internal constants */ /********************************************************************/ +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + #define ORINOCO_MIN_MTU 256 #define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD) @@ -537,6 +175,11 @@ MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer | HERMES_EV_WTERR | HERMES_EV_INFO \ | HERMES_EV_INFDROP ) +#define MAX_RID_LEN 1024 + +static const struct iw_handler_def orinoco_handler_def; +static struct ethtool_ops orinoco_ethtool_ops; + /********************************************************************/ /* Data tables */ /********************************************************************/ @@ -571,26 +214,45 @@ static struct { /* Data types */ /********************************************************************/ -struct header_struct { - /* 802.3 */ - u8 dest[ETH_ALEN]; - u8 src[ETH_ALEN]; - u16 len; - /* 802.2 */ +/* Used in Event handling. + * We avoid nested structres as they break on ARM -- Moustafa */ +struct hermes_tx_descriptor_802_11 { + /* hermes_tx_descriptor */ + u16 status; + u16 reserved1; + u16 reserved2; + u32 sw_support; + u8 retry_count; + u8 tx_rate; + u16 tx_control; + + /* ieee802_11_hdr */ + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + u16 data_len; + + /* ethhdr */ + unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ + unsigned char h_source[ETH_ALEN]; /* source ether addr */ + unsigned short h_proto; /* packet type ID field */ + + /* p8022_hdr */ u8 dsap; u8 ssap; u8 ctrl; - /* SNAP */ u8 oui[3]; + u16 ethertype; } __attribute__ ((packed)); -/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ -u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; - -#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) - +/* Rx frame header except compatibility 802.3 header */ struct hermes_rx_descriptor { + /* Control */ u16 status; u32 time; u8 silence; @@ -598,13 +260,24 @@ struct hermes_rx_descriptor { u8 rate; u8 rxflow; u32 reserved; + + /* 802.11 header */ + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + + /* Data length */ + u16 data_len; } __attribute__ ((packed)); /********************************************************************/ /* Function prototypes */ /********************************************************************/ -static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int __orinoco_program_rids(struct net_device *dev); static void __orinoco_set_multicast_list(struct net_device *dev); @@ -628,6 +301,10 @@ static inline void set_port_type(struct orinoco_private *priv) priv->createibss = 1; } break; + case IW_MODE_MONITOR: + priv->port_type = 3; + priv->createibss = 0; + break; default: printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", priv->ndev->name); @@ -814,7 +491,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) return 1; } - if (! netif_carrier_ok(dev)) { + if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { /* Oops, the firmware hasn't established a connection, silently drop the packet (this seems to be the safest approach). */ @@ -951,26 +628,55 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; u16 fid = hermes_read_regn(hw, TXCOMPLFID); - struct hermes_tx_descriptor desc; + struct hermes_tx_descriptor_802_11 hdr; int err = 0; if (fid == DUMMY_FID) return; /* Nothing's really happened */ - err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0); + /* Read the frame header */ + err = hermes_bap_pread(hw, IRQ_BAP, &hdr, + sizeof(struct hermes_tx_descriptor) + + sizeof(struct ieee80211_hdr), + fid, 0); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); + stats->tx_errors++; + if (err) { printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " "(FID=%04X error %d)\n", dev->name, fid, err); - } else { - DEBUG(1, "%s: Tx error, status %d\n", - dev->name, le16_to_cpu(desc.status)); + return; } - stats->tx_errors++; + DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, + err, fid); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + hdr.status = le16_to_cpu(hdr.status); + if (hdr.status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. + * We use the 802.11 header because the frame may + * not be 802.3 or may be mangled... + * In Ad-Hoc mode, it will be the node address. + * In managed mode, it will be most likely the AP addr + * User space will figure out how to convert it to + * whatever it needs (IP address or else). + * - Jean II */ + memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } netif_wake_queue(dev); - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); } static void orinoco_tx_timeout(struct net_device *dev) @@ -1047,18 +753,127 @@ static void orinoco_stat_gather(struct net_device *dev, } } +/* + * orinoco_rx_monitor - handle received monitor frames. + * + * Arguments: + * dev network device + * rxfid received FID + * desc rx descriptor of the frame + * + * Call context: interrupt + */ +static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, + struct hermes_rx_descriptor *desc) +{ + u32 hdrlen = 30; /* return full header by default */ + u32 datalen = 0; + u16 fc; + int err; + int len; + struct sk_buff *skb; + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + hermes_t *hw = &priv->hw; + + len = le16_to_cpu(desc->data_len); + + /* Determine the size of the header and the data */ + fc = le16_to_cpu(desc->frame_ctl); + switch (fc & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_TODS) + && (fc & IEEE80211_FCTL_FROMDS)) + hdrlen = 30; + else + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_MGMT: + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_CTL: + switch (fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_PSPOLL: + case IEEE80211_STYPE_RTS: + case IEEE80211_STYPE_CFEND: + case IEEE80211_STYPE_CFENDACK: + hdrlen = 16; + break; + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + } + break; + default: + /* Unknown frame type */ + break; + } + + /* sanity check the length */ + if (datalen > IEEE80211_DATA_LEN + 12) { + printk(KERN_DEBUG "%s: oversized monitor frame, " + "data length = %d\n", dev->name, datalen); + err = -EIO; + stats->rx_length_errors++; + goto update_stats; + } + + skb = dev_alloc_skb(hdrlen + datalen); + if (!skb) { + printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", + dev->name); + err = -ENOMEM; + goto drop; + } + + /* Copy the 802.11 header to the skb */ + memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); + skb->mac.raw = skb->data; + + /* If any, copy the data from the card to the skb */ + if (datalen > 0) { + err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), + ALIGN(datalen, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading monitor frame\n", + dev->name, err); + goto drop; + } + } + + skb->dev = dev; + skb->ip_summed = CHECKSUM_NONE; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = __constant_htons(ETH_P_802_2); + + dev->last_rx = jiffies; + stats->rx_packets++; + stats->rx_bytes += skb->len; + + netif_rx(skb); + return; + + drop: + dev_kfree_skb_irq(skb); + update_stats: + stats->rx_errors++; + stats->rx_dropped++; +} + static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; struct iw_statistics *wstats = &priv->wstats; struct sk_buff *skb = NULL; - u16 rxfid, status; - int length, data_len, data_off; - char *p; + u16 rxfid, status, fc; + int length; struct hermes_rx_descriptor desc; - struct header_struct hdr; - struct ethhdr *eh; + struct ethhdr *hdr; int err; rxfid = hermes_read_regn(hw, RXFID); @@ -1068,53 +883,46 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) if (err) { printk(KERN_ERR "%s: error %d reading Rx descriptor. " "Frame dropped.\n", dev->name, err); - stats->rx_errors++; - goto drop; + goto update_stats; } status = le16_to_cpu(desc.status); - if (status & HERMES_RXSTAT_ERR) { - if (status & HERMES_RXSTAT_UNDECRYPTABLE) { - wstats->discard.code++; - DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", - dev->name); - } else { - stats->rx_crc_errors++; - DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name); - } - stats->rx_errors++; - goto drop; + if (status & HERMES_RXSTAT_BADCRC) { + DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", + dev->name); + stats->rx_crc_errors++; + goto update_stats; } - /* For now we ignore the 802.11 header completely, assuming - that the card's firmware has handled anything vital */ + /* Handle frames in monitor mode */ + if (priv->iw_mode == IW_MODE_MONITOR) { + orinoco_rx_monitor(dev, rxfid, &desc); + return; + } - err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr), - rxfid, HERMES_802_3_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading frame header. " - "Frame dropped.\n", dev->name, err); - stats->rx_errors++; - goto drop; + if (status & HERMES_RXSTAT_UNDECRYPTABLE) { + DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", + dev->name); + wstats->discard.code++; + goto update_stats; } - length = ntohs(hdr.len); - + length = le16_to_cpu(desc.data_len); + fc = le16_to_cpu(desc.frame_ctl); + /* Sanity checks */ if (length < 3) { /* No for even an 802.2 LLC header */ /* At least on Symbol firmware with PCF we get quite a lot of these legitimately - Poll frames with no data. */ - stats->rx_dropped++; - goto drop; + return; } if (length > IEEE802_11_DATA_LEN) { printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", dev->name, length); stats->rx_length_errors++; - stats->rx_errors++; - goto drop; + goto update_stats; } /* We need space for the packet data itself, plus an ethernet @@ -1126,60 +934,53 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) if (!skb) { printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", dev->name); - goto drop; + goto update_stats; } - skb_reserve(skb, 2); /* This way the IP header is aligned */ + /* We'll prepend the header, so reserve space for it. The worst + case is no decapsulation, when 802.3 header is prepended and + nothing is removed. 2 is for aligning the IP header. */ + skb_reserve(skb, ETH_HLEN + 2); + + err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), + ALIGN(length, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + goto drop; + } /* Handle decapsulation * In most cases, the firmware tell us about SNAP frames. * For some reason, the SNAP frames sent by LinkSys APs * are not properly recognised by most firmwares. * So, check ourselves */ - if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || - ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || - is_ethersnap(&hdr)) { + if (length >= ENCAPS_OVERHEAD && + (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(skb->data))) { /* These indicate a SNAP within 802.2 LLC within 802.11 frame which we'll need to de-encapsulate to the original EthernetII frame. */ - - if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */ - stats->rx_length_errors++; - goto drop; - } - - /* Remove SNAP header, reconstruct EthernetII frame */ - data_len = length - ENCAPS_OVERHEAD; - data_off = HERMES_802_3_OFFSET + sizeof(hdr); - - eh = (struct ethhdr *)skb_put(skb, ETH_HLEN); - - memcpy(eh, &hdr, 2 * ETH_ALEN); - eh->h_proto = hdr.ethertype; + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); } else { - /* All other cases indicate a genuine 802.3 frame. No - decapsulation needed. We just throw the whole - thing in, and hope the protocol layer can deal with - it as 802.3 */ - data_len = length; - data_off = HERMES_802_3_OFFSET; - /* FIXME: we re-read from the card data we already read here */ - } - - p = skb_put(skb, data_len); - err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2), - rxfid, data_off); - if (err) { - printk(KERN_ERR "%s: error %d reading frame. " - "Frame dropped.\n", dev->name, err); - stats->rx_errors++; - goto drop; + /* 802.3 frame - prepend 802.3 header as is */ + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); + hdr->h_proto = htons(length); } + memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); + if (fc & IEEE80211_FCTL_FROMDS) + memcpy(hdr->h_source, desc.addr3, ETH_ALEN); + else + memcpy(hdr->h_source, desc.addr2, ETH_ALEN); dev->last_rx = jiffies; skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); skb->ip_summed = CHECKSUM_NONE; + if (fc & IEEE80211_FCTL_TODS) + skb->pkt_type = PACKET_OTHERHOST; /* Process the wireless stats if needed */ orinoco_stat_gather(dev, skb, &desc); @@ -1192,11 +993,10 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) return; drop: + dev_kfree_skb_irq(skb); + update_stats: + stats->rx_errors++; stats->rx_dropped++; - - if (skb) - dev_kfree_skb_irq(skb); - return; } /********************************************************************/ @@ -1240,6 +1040,99 @@ static void print_linkstatus(struct net_device *dev, u16 status) dev->name, s, status); } +/* Search scan results for requested BSSID, join it if found */ +static void orinoco_join_ap(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + struct join_req { + u8 bssid[ETH_ALEN]; + u16 channel; + } __attribute__ ((packed)) req; + const int atom_len = offsetof(struct prism2_scan_apinfo, atim); + struct prism2_scan_apinfo *atom; + int offset = 4; + u8 *buf; + u16 len; + + /* Allocate buffer for scan results */ + buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); + if (! buf) + return; + + if (orinoco_lock(priv, &flags) != 0) + goto out; + + /* Sanity checks in case user changed something in the meantime */ + if (! priv->bssid_fixed) + goto out; + + if (strlen(priv->desired_essid) == 0) + goto out; + + /* Read scan results from the firmware */ + err = hermes_read_ltv(hw, USER_BAP, + HERMES_RID_SCANRESULTSTABLE, + MAX_SCAN_LEN, &len, buf); + if (err) { + printk(KERN_ERR "%s: Cannot read scan results\n", + dev->name); + goto out; + } + + len = HERMES_RECLEN_TO_BYTES(len); + + /* Go through the scan results looking for the channel of the AP + * we were requested to join */ + for (; offset + atom_len <= len; offset += atom_len) { + atom = (struct prism2_scan_apinfo *) (buf + offset); + if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) + goto found; + } + + DEBUG(1, "%s: Requested AP not found in scan results\n", + dev->name); + goto out; + + found: + memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); + req.channel = atom->channel; /* both are little-endian */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, + &req); + if (err) + printk(KERN_ERR "%s: Error issuing join request\n", dev->name); + + out: + kfree(buf); + orinoco_unlock(priv, &flags); +} + +/* Send new BSSID to userspace */ +static void orinoco_send_wevents(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, wrqu.ap_addr.sa_data); + if (err != 0) + return; + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + orinoco_unlock(priv, &flags); +} + static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); @@ -1307,6 +1200,9 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) u16 newstatus; int connected; + if (priv->iw_mode == IW_MODE_MONITOR) + break; + if (len != sizeof(linkstatus)) { printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", dev->name, len); @@ -1319,6 +1215,15 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; newstatus = le16_to_cpu(linkstatus.linkstatus); + /* Symbol firmware uses "out of range" to signal that + * the hostscan frame can be requested. */ + if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && + priv->firmware_type == FIRMWARE_TYPE_SYMBOL && + priv->has_hostscan && priv->scan_inprogress) { + hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); + break; + } + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); @@ -1328,12 +1233,89 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) else if (!ignore_disconnect) netif_carrier_off(dev); - if (newstatus != priv->last_linkstatus) + if (newstatus != priv->last_linkstatus) { + priv->last_linkstatus = newstatus; print_linkstatus(dev, newstatus); + /* The info frame contains only one word which is the + * status (see hermes.h). The status is pretty boring + * in itself, that's why we export the new BSSID... + * Jean II */ + schedule_work(&priv->wevent_work); + } + } + break; + case HERMES_INQ_SCAN: + if (!priv->scan_inprogress && priv->bssid_fixed && + priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + schedule_work(&priv->join_work); + break; + } + /* fall through */ + case HERMES_INQ_HOSTSCAN: + case HERMES_INQ_HOSTSCAN_SYMBOL: { + /* Result of a scanning. Contains information about + * cells in the vicinity - Jean II */ + union iwreq_data wrqu; + unsigned char *buf; + + /* Sanity check */ + if (len > 4096) { + printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", + dev->name, len); + break; + } - priv->last_linkstatus = newstatus; + /* We are a strict producer. If the previous scan results + * have not been consumed, we just have to drop this + * frame. We can't remove the previous results ourselves, + * that would be *very* racy... Jean II */ + if (priv->scan_result != NULL) { + printk(KERN_WARNING "%s: Previous scan results not consumed, dropping info frame.\n", dev->name); + break; + } + + /* Allocate buffer for results */ + buf = kmalloc(len, GFP_ATOMIC); + if (buf == NULL) + /* No memory, so can't printk()... */ + break; + + /* Read scan data */ + err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, + infofid, sizeof(info)); + if (err) + break; + +#ifdef ORINOCO_DEBUG + { + int i; + printk(KERN_DEBUG "Scan result [%02X", buf[0]); + for(i = 1; i < (len * 2); i++) + printk(":%02X", buf[i]); + printk("]\n"); + } +#endif /* ORINOCO_DEBUG */ + + /* Allow the clients to access the results */ + priv->scan_len = len; + priv->scan_result = buf; + + /* Send an empty event to user space. + * We don't send the received data on the event because + * it would require us to do complex transcoding, and + * we want to minimise the work done in the irq handler + * Use a request to extract the data - Jean II */ + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); } break; + case HERMES_INQ_SEC_STAT_AGERE: + /* Security status (Agere specific) */ + /* Ignore this frame for now */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + break; + /* fall through */ default: printk(KERN_DEBUG "%s: Unknown information frame received: " "type 0x%04x, length %d\n", dev->name, type, len); @@ -1470,6 +1452,36 @@ static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) return err; } +/* Set fixed AP address */ +static int __orinoco_hw_set_wap(struct orinoco_private *priv) +{ + int roaming_flag; + int err = 0; + hermes_t *hw = &priv->hw; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* not supported */ + break; + case FIRMWARE_TYPE_INTERSIL: + if (priv->bssid_fixed) + roaming_flag = 2; + else + roaming_flag = 1; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFROAMINGMODE, + roaming_flag); + break; + case FIRMWARE_TYPE_SYMBOL: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFMANDATORYBSSID_SYMBOL, + &priv->desired_bssid); + break; + } + return err; +} + /* Change the WEP keys and/or the current keys. Can be called * either from __orinoco_hw_setup_wep() or directly from * orinoco_ioctl_setiwencode(). In the later case the association @@ -1655,6 +1667,13 @@ static int __orinoco_program_rids(struct net_device *dev) } } + /* Set the desired BSSID */ + err = __orinoco_hw_set_wap(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting AP address\n", + dev->name, err); + return err; + } /* Set the desired ESSID */ idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); @@ -1793,6 +1812,20 @@ static int __orinoco_program_rids(struct net_device *dev) } } + if (priv->iw_mode == IW_MODE_MONITOR) { + /* Enable monitor mode */ + dev->type = ARPHRD_IEEE80211; + err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_MONITOR, 0, NULL); + } else { + /* Disable monitor mode */ + dev->type = ARPHRD_ETHER; + err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_STOP, 0, NULL); + } + if (err) + return err; + /* Set promiscuity / multicast*/ priv->promiscuous = 0; priv->mc_count = 0; @@ -1869,55 +1902,6 @@ __orinoco_set_multicast_list(struct net_device *dev) dev->flags &= ~IFF_PROMISC; } -static int orinoco_reconfigure(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - unsigned long flags; - int err = 0; - - if (priv->broken_disableport) { - schedule_work(&priv->reset_work); - return 0; - } - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_disable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n", - dev->name); - priv->broken_disableport = 1; - goto out; - } - - err = __orinoco_program_rids(dev); - if (err) { - printk(KERN_WARNING "%s: Unable to reconfigure card\n", - dev->name); - goto out; - } - - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", - dev->name); - goto out; - } - - out: - if (err) { - printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); - schedule_work(&priv->reset_work); - err = 0; - } - - orinoco_unlock(priv, &flags); - return err; - -} - /* This must be called from user context, without locks held - use * schedule_work() */ static void orinoco_reset(struct net_device *dev) @@ -1946,6 +1930,11 @@ static void orinoco_reset(struct net_device *dev) orinoco_unlock(priv, &flags); + /* Scanning support: Cleanup of driver struct */ + kfree(priv->scan_result); + priv->scan_result = NULL; + priv->scan_inprogress = 0; + if (priv->hard_reset) { err = (*priv->hard_reset)(priv); if (err) { @@ -2184,6 +2173,8 @@ static int determine_firmware(struct net_device *dev) priv->has_mwo = (firmver >= 0x60000); priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ priv->ibss_port = 1; + priv->has_hostscan = (firmver >= 0x8000a); + priv->broken_monitor = (firmver >= 0x80000); /* Tested with Agere firmware : * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II @@ -2229,6 +2220,8 @@ static int determine_firmware(struct net_device *dev) priv->ibss_port = 4; priv->broken_disableport = (firmver == 0x25013) || (firmver >= 0x30000 && firmver <= 0x31000); + priv->has_hostscan = (firmver >= 0x31001) || + (firmver >= 0x29057 && firmver < 0x30000); /* Tested with Intel firmware : 0x20015 => Jean II */ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ break; @@ -2248,6 +2241,7 @@ static int determine_firmware(struct net_device *dev) priv->has_ibss = (firmver >= 0x000700); /* FIXME */ priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); priv->has_pm = (firmver >= 0x000700); + priv->has_hostscan = (firmver >= 0x010301); if (firmver >= 0x000800) priv->ibss_port = 0; @@ -2456,8 +2450,9 @@ struct net_device *alloc_orinocodev(int sizeof_card, dev->tx_timeout = orinoco_tx_timeout; dev->watchdog_timeo = HZ; /* 1 second timeout */ dev->get_stats = orinoco_get_stats; + dev->ethtool_ops = &orinoco_ethtool_ops; dev->get_wireless_stats = orinoco_get_wireless_stats; - dev->do_ioctl = orinoco_ioctl; + dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; dev->change_mtu = orinoco_change_mtu; dev->set_multicast_list = orinoco_set_multicast_list; /* we use the default eth_mac_addr for setting the MAC addr */ @@ -2473,6 +2468,8 @@ struct net_device *alloc_orinocodev(int sizeof_card, * before anything else touches the * hardware */ INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); + INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev); + INIT_WORK(&priv->wevent_work, (void (*)(void *))orinoco_send_wevents, dev); netif_carrier_off(dev); priv->last_linkstatus = 0xffff; @@ -2483,6 +2480,9 @@ struct net_device *alloc_orinocodev(int sizeof_card, void free_orinocodev(struct net_device *dev) { + struct orinoco_private *priv = netdev_priv(dev); + + kfree(priv->scan_result); free_netdev(dev); } @@ -2490,24 +2490,6 @@ void free_orinocodev(struct net_device *dev) /* Wireless extensions */ /********************************************************************/ -static int orinoco_hw_get_bssid(struct orinoco_private *priv, - char buf[ETH_ALEN]) -{ - hermes_t *hw = &priv->hw; - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, buf); - - orinoco_unlock(priv, &flags); - - return err; -} - static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, char buf[IW_ESSID_MAX_SIZE+1]) { @@ -2633,140 +2615,271 @@ static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, return 0; } -static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq) +static int orinoco_ioctl_getname(struct net_device *dev, + struct iw_request_info *info, + char *name, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - int mode; - struct iw_range range; int numrates; - int i, k; + int err; + + err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); + + if (!err && (numrates > 2)) + strcpy(name, "IEEE 802.11b"); + else + strcpy(name, "IEEE 802.11-DS"); + + return 0; +} + +static int orinoco_ioctl_setwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ unsigned long flags; + static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - TRACE_ENTER(dev->name); + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Enable automatic roaming - no sanity checks are needed */ + if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || + memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { + priv->bssid_fixed = 0; + memset(priv->desired_bssid, 0, ETH_ALEN); + + /* "off" means keep existing connection */ + if (ap_addr->sa_data[0] == 0) { + __orinoco_hw_set_wap(priv); + err = 0; + } + goto out; + } + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { + printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " + "support manual roaming\n", + dev->name); + err = -EOPNOTSUPP; + goto out; + } + + if (priv->iw_mode != IW_MODE_INFRA) { + printk(KERN_WARNING "%s: Manual roaming supported only in " + "managed mode\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Intersil firmware hangs without Desired ESSID */ + if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && + strlen(priv->desired_essid) == 0) { + printk(KERN_WARNING "%s: Desired ESSID must be set for " + "manual roaming\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Finally, enable manual roaming */ + priv->bssid_fixed = 1; + memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_getwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + hermes_t *hw = &priv->hw; + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ap_addr->sa_family = ARPHRD_ETHER; + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, ap_addr->sa_data); + + orinoco_unlock(priv, &flags); + + return err; +} - if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range))) - return -EFAULT; +static int orinoco_ioctl_setmode(struct net_device *dev, + struct iw_request_info *info, + u32 *mode, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; - rrq->length = sizeof(range); + if (priv->iw_mode == *mode) + return 0; if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - mode = priv->iw_mode; + switch (*mode) { + case IW_MODE_ADHOC: + if (!priv->has_ibss && !priv->has_port3) + err = -EOPNOTSUPP; + break; + + case IW_MODE_INFRA: + break; + + case IW_MODE_MONITOR: + if (priv->broken_monitor && !force_monitor) { + printk(KERN_WARNING "%s: Monitor mode support is " + "buggy in this firmware, not enabling\n", + dev->name); + err = -EOPNOTSUPP; + } + break; + + default: + err = -EOPNOTSUPP; + break; + } + + if (err == -EINPROGRESS) { + priv->iw_mode = *mode; + set_port_type(priv); + } + orinoco_unlock(priv, &flags); - memset(&range, 0, sizeof(range)); + return err; +} + +static int orinoco_ioctl_getmode(struct net_device *dev, + struct iw_request_info *info, + u32 *mode, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + *mode = priv->iw_mode; + return 0; +} + +static int orinoco_ioctl_getiwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + struct iw_range *range = (struct iw_range *) extra; + int numrates; + int i, k; + + TRACE_ENTER(dev->name); - /* Much of this shamelessly taken from wvlan_cs.c. No idea - * what it all means -dgibson */ - range.we_version_compiled = WIRELESS_EXT; - range.we_version_source = 11; + rrq->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); - range.min_nwid = range.max_nwid = 0; /* We don't use nwids */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 14; /* Set available channels/frequencies */ - range.num_channels = NUM_CHANNELS; + range->num_channels = NUM_CHANNELS; k = 0; for (i = 0; i < NUM_CHANNELS; i++) { if (priv->channel_mask & (1 << i)) { - range.freq[k].i = i + 1; - range.freq[k].m = channel_frequency[i] * 100000; - range.freq[k].e = 1; + range->freq[k].i = i + 1; + range->freq[k].m = channel_frequency[i] * 100000; + range->freq[k].e = 1; k++; } if (k >= IW_MAX_FREQUENCIES) break; } - range.num_frequency = k; + range->num_frequency = k; + range->sensitivity = 3; - range.sensitivity = 3; + if (priv->has_wep) { + range->max_encoding_tokens = ORINOCO_MAX_KEYS; + range->encoding_size[0] = SMALL_KEY_SIZE; + range->num_encoding_sizes = 1; - if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ + if (priv->has_big_wep) { + range->encoding_size[1] = LARGE_KEY_SIZE; + range->num_encoding_sizes = 2; + } + } + + if ((priv->iw_mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ /* Quality stats meaningless in ad-hoc mode */ - range.max_qual.qual = 0; - range.max_qual.level = 0; - range.max_qual.noise = 0; - range.avg_qual.qual = 0; - range.avg_qual.level = 0; - range.avg_qual.noise = 0; } else { - range.max_qual.qual = 0x8b - 0x2f; - range.max_qual.level = 0x2f - 0x95 - 1; - range.max_qual.noise = 0x2f - 0x95 - 1; + range->max_qual.qual = 0x8b - 0x2f; + range->max_qual.level = 0x2f - 0x95 - 1; + range->max_qual.noise = 0x2f - 0x95 - 1; /* Need to get better values */ - range.avg_qual.qual = 0x24; - range.avg_qual.level = 0xC2; - range.avg_qual.noise = 0x9E; + range->avg_qual.qual = 0x24; + range->avg_qual.level = 0xC2; + range->avg_qual.noise = 0x9E; } err = orinoco_hw_get_bitratelist(priv, &numrates, - range.bitrate, IW_MAX_BITRATES); + range->bitrate, IW_MAX_BITRATES); if (err) return err; - range.num_bitrates = numrates; - + range->num_bitrates = numrates; + /* Set an indication of the max TCP throughput in bit/s that we can * expect using this interface. May be use for QoS stuff... * Jean II */ - if(numrates > 2) - range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ + if (numrates > 2) + range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ else - range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ - - range.min_rts = 0; - range.max_rts = 2347; - range.min_frag = 256; - range.max_frag = 2346; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - if (priv->has_wep) { - range.max_encoding_tokens = ORINOCO_MAX_KEYS; - - range.encoding_size[0] = SMALL_KEY_SIZE; - range.num_encoding_sizes = 1; - - if (priv->has_big_wep) { - range.encoding_size[1] = LARGE_KEY_SIZE; - range.num_encoding_sizes = 2; - } - } else { - range.num_encoding_sizes = 0; - range.max_encoding_tokens = 0; - } - orinoco_unlock(priv, &flags); - - range.min_pmp = 0; - range.max_pmp = 65535000; - range.min_pmt = 0; - range.max_pmt = 65535 * 1000; /* ??? */ - range.pmp_flags = IW_POWER_PERIOD; - range.pmt_flags = IW_POWER_TIMEOUT; - range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; - - range.num_txpower = 1; - range.txpower[0] = 15; /* 15dBm */ - range.txpower_capa = IW_TXPOW_DBM; - - range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; - range.retry_flags = IW_RETRY_LIMIT; - range.r_time_flags = IW_RETRY_LIFETIME; - range.min_retry = 0; - range.max_retry = 65535; /* ??? */ - range.min_r_time = 0; - range.max_r_time = 65535 * 1000; /* ??? */ - - if (copy_to_user(rrq->pointer, &range, sizeof(range))) - return -EFAULT; + range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ + + range->min_rts = 0; + range->max_rts = 2347; + range->min_frag = 256; + range->max_frag = 2346; + + range->min_pmp = 0; + range->max_pmp = 65535000; + range->min_pmt = 0; + range->max_pmt = 65535 * 1000; /* ??? */ + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_TIMEOUT; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; + + range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = IW_RETRY_LIFETIME; + range->min_retry = 0; + range->max_retry = 65535; /* ??? */ + range->min_r_time = 0; + range->max_r_time = 65535 * 1000; /* ??? */ TRACE_EXIT(dev->name); return 0; } -static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq) +static int orinoco_ioctl_setiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) { struct orinoco_private *priv = netdev_priv(dev); int index = (erq->flags & IW_ENCODE_INDEX) - 1; @@ -2774,8 +2887,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *er int enable = priv->wep_on; int restricted = priv->wep_restrict; u16 xlen = 0; - int err = 0; - char keybuf[ORINOCO_MAX_KEY_SIZE]; + int err = -EINPROGRESS; /* Call commit handler */ unsigned long flags; if (! priv->has_wep) @@ -2788,9 +2900,6 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *er if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) return -E2BIG; - - if (copy_from_user(keybuf, erq->pointer, erq->length)) - return -EFAULT; } if (orinoco_lock(priv, &flags) != 0) @@ -2864,12 +2973,14 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *er return err; } -static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq) +static int orinoco_ioctl_getiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) { struct orinoco_private *priv = netdev_priv(dev); int index = (erq->flags & IW_ENCODE_INDEX) - 1; u16 xlen = 0; - char keybuf[ORINOCO_MAX_KEY_SIZE]; unsigned long flags; if (! priv->has_wep) @@ -2898,51 +3009,47 @@ static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *er memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); orinoco_unlock(priv, &flags); - - if (erq->pointer) { - if (copy_to_user(erq->pointer, keybuf, xlen)) - return -EFAULT; - } - return 0; } -static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) +static int orinoco_ioctl_setessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) { struct orinoco_private *priv = netdev_priv(dev); - char essidbuf[IW_ESSID_MAX_SIZE+1]; unsigned long flags; /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it * anyway... - Jean II */ - memset(&essidbuf, 0, sizeof(essidbuf)); - - if (erq->flags) { - /* iwconfig includes the NUL in the specified length */ - if (erq->length > IW_ESSID_MAX_SIZE+1) - return -E2BIG; - - if (copy_from_user(&essidbuf, erq->pointer, erq->length)) - return -EFAULT; - - essidbuf[IW_ESSID_MAX_SIZE] = '\0'; - } + /* Hum... Should not use Wireless Extension constant (may change), + * should use our own... - Jean II */ + if (erq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid)); + /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ + memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); + + /* If not ANY, get the new ESSID */ + if (erq->flags) { + memcpy(priv->desired_essid, essidbuf, erq->length); + } orinoco_unlock(priv, &flags); - return 0; + return -EINPROGRESS; /* Call commit handler */ } -static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq) +static int orinoco_ioctl_getessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) { struct orinoco_private *priv = netdev_priv(dev); - char essidbuf[IW_ESSID_MAX_SIZE+1]; int active; int err = 0; unsigned long flags; @@ -2956,51 +3063,46 @@ static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq) } else { if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf)); + memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE + 1); orinoco_unlock(priv, &flags); } erq->flags = 1; erq->length = strlen(essidbuf) + 1; - if (erq->pointer) - if (copy_to_user(erq->pointer, essidbuf, erq->length)) - return -EFAULT; TRACE_EXIT(dev->name); return 0; } -static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq) +static int orinoco_ioctl_setnick(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *nrq, + char *nickbuf) { struct orinoco_private *priv = netdev_priv(dev); - char nickbuf[IW_ESSID_MAX_SIZE+1]; unsigned long flags; if (nrq->length > IW_ESSID_MAX_SIZE) return -E2BIG; - memset(nickbuf, 0, sizeof(nickbuf)); - - if (copy_from_user(nickbuf, nrq->pointer, nrq->length)) - return -EFAULT; - - nickbuf[nrq->length] = '\0'; - if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - memcpy(priv->nick, nickbuf, sizeof(priv->nick)); + memset(priv->nick, 0, sizeof(priv->nick)); + memcpy(priv->nick, nickbuf, nrq->length); orinoco_unlock(priv, &flags); - return 0; + return -EINPROGRESS; /* Call commit handler */ } -static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq) +static int orinoco_ioctl_getnick(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *nrq, + char *nickbuf) { struct orinoco_private *priv = netdev_priv(dev); - char nickbuf[IW_ESSID_MAX_SIZE+1]; unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -3011,23 +3113,22 @@ static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq) nrq->length = strlen(nickbuf)+1; - if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf))) - return -EFAULT; - return 0; } -static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq) +static int orinoco_ioctl_setfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); int chan = -1; unsigned long flags; + int err = -EINPROGRESS; /* Call commit handler */ - /* We can only use this in Ad-Hoc demo mode to set the operating - * frequency, or in IBSS mode to set the frequency where the IBSS - * will be created - Jean II */ - if (priv->iw_mode != IW_MODE_ADHOC) - return -EOPNOTSUPP; + /* In infrastructure mode the AP sets the channel */ + if (priv->iw_mode == IW_MODE_INFRA) + return -EBUSY; if ( (frq->e == 0) && (frq->m <= 1000) ) { /* Setting by channel number */ @@ -3051,13 +3152,44 @@ static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq) if (orinoco_lock(priv, &flags) != 0) return -EBUSY; + priv->channel = chan; + if (priv->iw_mode == IW_MODE_MONITOR) { + /* Fast channel change - no commit if successful */ + hermes_t *hw = &priv->hw; + err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_SET_CHANNEL, + chan, NULL); + } orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_getfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int tmp; + + /* Locking done in there */ + tmp = orinoco_hw_get_freq(priv); + if (tmp < 0) { + return tmp; + } + + frq->m = tmp; + frq->e = 1; + return 0; } -static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq) +static int orinoco_ioctl_getsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; @@ -3083,7 +3215,10 @@ static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq) return 0; } -static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq) +static int orinoco_ioctl_setsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); int val = srq->value; @@ -3100,10 +3235,13 @@ static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq) priv->ap_density = val; orinoco_unlock(priv, &flags); - return 0; + return -EINPROGRESS; /* Call commit handler */ } -static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq) +static int orinoco_ioctl_setrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); int val = rrq->value; @@ -3121,13 +3259,30 @@ static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq) priv->rts_thresh = val; orinoco_unlock(priv, &flags); + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + rrq->value = priv->rts_thresh; + rrq->disabled = (rrq->value == 2347); + rrq->fixed = 1; + return 0; } -static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq) +static int orinoco_ioctl_setfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int err = 0; + int err = -EINPROGRESS; /* Call commit handler */ unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -3159,11 +3314,14 @@ static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq) return err; } -static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq) +static int orinoco_ioctl_getfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; - int err = 0; + int err; u16 val; unsigned long flags; @@ -3196,10 +3354,12 @@ static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq) return err; } -static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq) +static int orinoco_ioctl_setrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int err = 0; int ratemode = -1; int bitrate; /* 100s of kilobits */ int i; @@ -3235,10 +3395,13 @@ static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq) priv->bitratemode = ratemode; orinoco_unlock(priv, &flags); - return err; + return -EINPROGRESS; } -static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq) +static int orinoco_ioctl_getrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; @@ -3303,10 +3466,13 @@ static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq) return err; } -static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq) +static int orinoco_ioctl_setpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int err = 0; + int err = -EINPROGRESS; /* Call commit handler */ unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -3355,7 +3521,10 @@ static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq) return err; } -static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq) +static int orinoco_ioctl_getpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; @@ -3403,7 +3572,10 @@ static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq) return err; } -static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq) +static int orinoco_ioctl_getretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; @@ -3454,10 +3626,38 @@ static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq) return err; } -static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq) +static int orinoco_ioctl_reset(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int val = *( (int *) wrq->u.name ); + + if (! capable(CAP_NET_ADMIN)) + return -EPERM; + + if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { + printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); + + /* Firmware reset */ + orinoco_reset(dev); + } else { + printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + + schedule_work(&priv->reset_work); + } + + return 0; +} + +static int orinoco_ioctl_setibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) + +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) extra ); unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -3469,28 +3669,28 @@ static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq) set_port_type(priv); orinoco_unlock(priv, &flags); - return 0; + return -EINPROGRESS; /* Call commit handler */ } -static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq) +static int orinoco_ioctl_getibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *)wrq->u.name; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; + int *val = (int *) extra; *val = priv->ibss_port; - orinoco_unlock(priv, &flags); - return 0; } -static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq) +static int orinoco_ioctl_setport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int val = *( (int *) wrq->u.name ); + int val = *( (int *) extra ); int err = 0; unsigned long flags; @@ -3519,51 +3719,131 @@ static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq) err = -EINVAL; } - if (! err) + if (! err) { /* Actually update the mode we are using */ set_port_type(priv); + err = -EINPROGRESS; + } orinoco_unlock(priv, &flags); return err; } -static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq) +static int orinoco_ioctl_getport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *) extra; + + *val = priv->prefer_port3; + return 0; +} + +static int orinoco_ioctl_setpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *)wrq->u.name; unsigned long flags; + int val; + + if (! priv->has_preamble) + return -EOPNOTSUPP; + + /* 802.11b has recently defined some short preamble. + * Basically, the Phy header has been reduced in size. + * This increase performance, especially at high rates + * (the preamble is transmitted at 1Mb/s), unfortunately + * this give compatibility troubles... - Jean II */ + val = *( (int *) extra ); if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - *val = priv->prefer_port3; + if (val) + priv->preamble = 1; + else + priv->preamble = 0; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *) extra; + + if (! priv->has_preamble) + return -EOPNOTSUPP; + + *val = priv->preamble; return 0; } +/* ioctl interface to hermes_read_ltv() + * To use with iwpriv, pass the RID as the token argument, e.g. + * iwpriv get_rid [0xfc00] + * At least Wireless Tools 25 is required to use iwpriv. + * For Wireless Tools 25 and 26 append "dummy" are the end. */ +static int orinoco_ioctl_getrid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int rid = data->flags; + u16 length; + int err; + unsigned long flags; + + /* It's a "get" function, but we don't want users to access the + * WEP key and other raw firmware data */ + if (! capable(CAP_NET_ADMIN)) + return -EPERM; + + if (rid < 0xfc00 || rid > 0xffff) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, + extra); + if (err) + goto out; + + data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), + MAX_RID_LEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + /* Spy is used for link quality/strength measurements in Ad-Hoc mode * Jean II */ -static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq) +static int orinoco_ioctl_setspy(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *srq, + char *extra) + { struct orinoco_private *priv = netdev_priv(dev); - struct sockaddr address[IW_MAX_SPY]; + struct sockaddr *address = (struct sockaddr *) extra; int number = srq->length; int i; - int err = 0; unsigned long flags; - /* Check the number of addresses */ - if (number > IW_MAX_SPY) - return -E2BIG; - - /* Get the data in the driver */ - if (srq->pointer) { - if (copy_from_user(address, srq->pointer, - sizeof(struct sockaddr) * number)) - return -EFAULT; - } - /* Make sure nobody mess with the structure while we do */ if (orinoco_lock(priv, &flags) != 0) return -EBUSY; @@ -3587,14 +3867,17 @@ static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq) /* Now, let the others play */ orinoco_unlock(priv, &flags); - return err; + /* Do NOT call commit handler */ + return 0; } -static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq) +static int orinoco_ioctl_getspy(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *srq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - struct sockaddr address[IW_MAX_SPY]; - struct iw_quality spy_stat[IW_MAX_SPY]; + struct sockaddr *address = (struct sockaddr *) extra; int number; int i; unsigned long flags; @@ -3603,7 +3886,12 @@ static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq) return -EBUSY; number = priv->spy_number; - if ((number > 0) && (srq->pointer)) { + /* Create address struct */ + for (i = 0; i < number; i++) { + memcpy(address[i].sa_data, priv->spy_address[i], ETH_ALEN); + address[i].sa_family = AF_UNIX; + } + if (number > 0) { /* Create address struct */ for (i = 0; i < number; i++) { memcpy(address[i].sa_data, priv->spy_address[i], @@ -3614,344 +3902,503 @@ static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq) /* In theory, we should disable irqs while copying the stats * because the rx path might update it in the middle... * Bah, who care ? - Jean II */ - memcpy(&spy_stat, priv->spy_stat, - sizeof(struct iw_quality) * IW_MAX_SPY); - for (i=0; i < number; i++) - priv->spy_stat[i].updated = 0; + memcpy(extra + (sizeof(struct sockaddr) * number), + priv->spy_stat, sizeof(struct iw_quality) * number); } + /* Reset updated flags. */ + for (i = 0; i < number; i++) + priv->spy_stat[i].updated = 0; orinoco_unlock(priv, &flags); - /* Push stuff to user space */ srq->length = number; - if(copy_to_user(srq->pointer, address, - sizeof(struct sockaddr) * number)) - return -EFAULT; - if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number), - &spy_stat, sizeof(struct iw_quality) * number)) - return -EFAULT; return 0; } -static int -orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +/* Trigger a scan (look for other cells in the vicinity */ +static int orinoco_ioctl_setscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) { struct orinoco_private *priv = netdev_priv(dev); - struct iwreq *wrq = (struct iwreq *)rq; + hermes_t *hw = &priv->hw; int err = 0; - int tmp; - int changed = 0; unsigned long flags; - TRACE_ENTER(dev->name); + /* Note : you may have realised that, as this is a SET operation, + * this is priviledged and therefore a normal user can't + * perform scanning. + * This is not an error, while the device perform scanning, + * traffic doesn't flow, so it's a perfect DoS... + * Jean II */ - /* In theory, we could allow most of the the SET stuff to be - * done. In practice, the lapse of time at startup when the - * card is not ready is very short, so why bother... Note - * that netif_device_present is different from up/down - * (ifconfig), when the device is not yet up, it is usually - * already ready... Jean II */ - if (! netif_device_present(dev)) - return -ENODEV; + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; - switch (cmd) { - case SIOCGIWNAME: - strcpy(wrq->u.name, "IEEE 802.11-DS"); - break; - - case SIOCGIWAP: - wrq->u.ap_addr.sa_family = ARPHRD_ETHER; - err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data); - break; + /* Scanning with port 0 disabled would fail */ + if (!netif_running(dev)) { + err = -ENETDOWN; + goto out; + } - case SIOCGIWRANGE: - err = orinoco_ioctl_getiwrange(dev, &wrq->u.data); - break; + /* In monitor mode, the scan results are always empty. + * Probe responses are passed to the driver as received + * frames and could be processed in software. */ + if (priv->iw_mode == IW_MODE_MONITOR) { + err = -EOPNOTSUPP; + goto out; + } - case SIOCSIWMODE: - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - switch (wrq->u.mode) { - case IW_MODE_ADHOC: - if (! (priv->has_ibss || priv->has_port3) ) - err = -EINVAL; - else { - priv->iw_mode = IW_MODE_ADHOC; - changed = 1; - } - break; + /* Note : because we don't lock out the irq handler, the way + * we access scan variables in priv is critical. + * o scan_inprogress : not touched by irq handler + * o scan_mode : not touched by irq handler + * o scan_result : irq is strict producer, non-irq is strict + * consumer. + * o scan_len : synchronised with scan_result + * Before modifying anything on those variables, please think hard ! + * Jean II */ - case IW_MODE_INFRA: - priv->iw_mode = IW_MODE_INFRA; - changed = 1; - break; + /* If there is still some left-over scan results, get rid of it */ + if (priv->scan_result != NULL) { + /* What's likely is that a client did crash or was killed + * between triggering the scan request and reading the + * results, so we need to reset everything. + * Some clients that are too slow may suffer from that... + * Jean II */ + kfree(priv->scan_result); + priv->scan_result = NULL; + } - default: - err = -EINVAL; - break; - } - set_port_type(priv); - orinoco_unlock(priv, &flags); - break; + /* Save flags */ + priv->scan_mode = srq->flags; - case SIOCGIWMODE: - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - wrq->u.mode = priv->iw_mode; - orinoco_unlock(priv, &flags); - break; + /* Always trigger scanning, even if it's in progress. + * This way, if the info frame get lost, we will recover somewhat + * gracefully - Jean II */ - case SIOCSIWENCODE: - err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding); - if (! err) - changed = 1; + if (priv->has_hostscan) { + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN_SYMBOL, + HERMES_HOSTSCAN_SYMBOL_ONCE | + HERMES_HOSTSCAN_SYMBOL_BCAST); + break; + case FIRMWARE_TYPE_INTERSIL: { + u16 req[3]; + + req[0] = cpu_to_le16(0x3fff); /* All channels */ + req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ + req[2] = 0; /* Any ESSID */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN, &req); + } break; + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + 0); /* Any ESSID */ + if (err) + break; - case SIOCGIWENCODE: - if (! capable(CAP_NET_ADMIN)) { - err = -EPERM; + err = hermes_inquire(hw, HERMES_INQ_SCAN); break; } + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); - err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding); - break; - - case SIOCSIWESSID: - err = orinoco_ioctl_setessid(dev, &wrq->u.essid); - if (! err) - changed = 1; - break; + /* One more client */ + if (! err) + priv->scan_inprogress = 1; - case SIOCGIWESSID: - err = orinoco_ioctl_getessid(dev, &wrq->u.essid); - break; + out: + orinoco_unlock(priv, &flags); + return err; +} - case SIOCSIWNICKN: - err = orinoco_ioctl_setnick(dev, &wrq->u.data); - if (! err) - changed = 1; - break; +/* Translate scan data returned from the card to a card independant + * format that the Wireless Tools will understand - Jean II */ +static inline int orinoco_translate_scan(struct net_device *dev, + char *buffer, + char *scan, + int scan_len) +{ + struct orinoco_private *priv = netdev_priv(dev); + int offset; /* In the scan data */ + union hermes_scan_info *atom; + int atom_len; + u16 capabilities; + u16 channel; + struct iw_event iwe; /* Temporary buffer */ + char * current_ev = buffer; + char * end_buf = buffer + IW_SCAN_MAX_DATA; - case SIOCGIWNICKN: - err = orinoco_ioctl_getnick(dev, &wrq->u.data); + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + atom_len = sizeof(struct agere_scan_apinfo); + offset = 0; break; - - case SIOCGIWFREQ: - tmp = orinoco_hw_get_freq(priv); - if (tmp < 0) { - err = tmp; - } else { - wrq->u.freq.m = tmp; - wrq->u.freq.e = 1; - } + case FIRMWARE_TYPE_SYMBOL: + /* Lack of documentation necessitates this hack. + * Different firmwares have 68 or 76 byte long atoms. + * We try modulo first. If the length divides by both, + * we check what would be the channel in the second + * frame for a 68-byte atom. 76-byte atoms have 0 there. + * Valid channel cannot be 0. */ + if (scan_len % 76) + atom_len = 68; + else if (scan_len % 68) + atom_len = 76; + else if (scan_len >= 1292 && scan[68] == 0) + atom_len = 76; + else + atom_len = 68; + offset = 0; break; - - case SIOCSIWFREQ: - err = orinoco_ioctl_setfreq(dev, &wrq->u.freq); - if (! err) - changed = 1; + case FIRMWARE_TYPE_INTERSIL: + offset = 4; + if (priv->has_hostscan) + atom_len = scan[0] + (scan[1] << 8); + else + atom_len = offsetof(struct prism2_scan_apinfo, atim); break; + default: + return 0; + } - case SIOCGIWSENS: - err = orinoco_ioctl_getsens(dev, &wrq->u.sens); - break; + /* Check that we got an whole number of atoms */ + if ((scan_len - offset) % atom_len) { + printk(KERN_ERR "%s: Unexpected scan data length %d, " + "atom_len %d, offset %d\n", dev->name, scan_len, + atom_len, offset); + return 0; + } - case SIOCSIWSENS: - err = orinoco_ioctl_setsens(dev, &wrq->u.sens); - if (! err) - changed = 1; - break; + /* Read the entries one by one */ + for (; offset + atom_len <= scan_len; offset += atom_len) { + /* Get next atom */ + atom = (union hermes_scan_info *) (scan + offset); + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, atom->a.bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + iwe.u.data.length = le16_to_cpu(atom->a.essid_len); + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); + + /* Add mode */ + iwe.cmd = SIOCGIWMODE; + capabilities = le16_to_cpu(atom->a.capabilities); + if (capabilities & 0x3) { + if (capabilities & 0x1) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + } - case SIOCGIWRTS: - wrq->u.rts.value = priv->rts_thresh; - wrq->u.rts.disabled = (wrq->u.rts.value == 2347); - wrq->u.rts.fixed = 1; - break; + channel = atom->s.channel; + if ( (channel >= 1) && (channel <= NUM_CHANNELS) ) { + /* Add frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel_frequency[channel-1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } - case SIOCSIWRTS: - err = orinoco_ioctl_setrts(dev, &wrq->u.rts); - if (! err) - changed = 1; - break; + /* Add quality statistics */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = 0x10; /* no link quality */ + iwe.u.qual.level = (__u8) le16_to_cpu(atom->a.level) - 0x95; + iwe.u.qual.noise = (__u8) le16_to_cpu(atom->a.noise) - 0x95; + /* Wireless tools prior to 27.pre22 will show link quality + * anyway, so we provide a reasonable value. */ + if (iwe.u.qual.level > iwe.u.qual.noise) + iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; + else + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); - case SIOCSIWFRAG: - err = orinoco_ioctl_setfrag(dev, &wrq->u.frag); - if (! err) - changed = 1; - break; + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (capabilities & 0x10) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); + + /* Bit rate is not available in Lucent/Agere firmwares */ + if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { + char * current_val = current_ev + IW_EV_LCP_LEN; + int i; + int step; + + if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) + step = 2; + else + step = 1; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + /* Max 10 values */ + for (i = 0; i < 10; i += step) { + /* NULL terminated */ + if (atom->p.rates[i] == 0x0) + break; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((atom->p.rates[i] & 0x7f) * 500000); + current_val = iwe_stream_add_value(current_ev, current_val, + end_buf, &iwe, + IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if ((current_val - current_ev) > IW_EV_LCP_LEN) + current_ev = current_val; + } - case SIOCGIWFRAG: - err = orinoco_ioctl_getfrag(dev, &wrq->u.frag); - break; + /* The other data in the scan result are not really + * interesting, so for now drop it - Jean II */ + } + return current_ev - buffer; +} - case SIOCSIWRATE: - err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate); - if (! err) - changed = 1; - break; +/* Return results of a scan */ +static int orinoco_ioctl_getscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; - case SIOCGIWRATE: - err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate); - break; + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; - case SIOCSIWPOWER: - err = orinoco_ioctl_setpower(dev, &wrq->u.power); - if (! err) - changed = 1; - break; + /* If no results yet, ask to try again later */ + if (priv->scan_result == NULL) { + if (priv->scan_inprogress) + /* Important note : we don't want to block the caller + * until results are ready for various reasons. + * First, managing wait queues is complex and racy. + * Second, we grab some rtnetlink lock before comming + * here (in dev_ioctl()). + * Third, we generate an Wireless Event, so the + * caller can wait itself on that - Jean II */ + err = -EAGAIN; + else + /* Client error, no scan results... + * The caller need to restart the scan. */ + err = -ENODATA; + } else { + /* We have some results to push back to user space */ + + /* Translate to WE format */ + srq->length = orinoco_translate_scan(dev, extra, + priv->scan_result, + priv->scan_len); + + /* Return flags */ + srq->flags = (__u16) priv->scan_mode; + + /* Results are here, so scan no longer in progress */ + priv->scan_inprogress = 0; + + /* In any case, Scan results will be cleaned up in the + * reset function and when exiting the driver. + * The person triggering the scanning may never come to + * pick the results, so we need to do it in those places. + * Jean II */ + +#ifdef SCAN_SINGLE_READ + /* If you enable this option, only one client (the first + * one) will be able to read the result (and only one + * time). If there is multiple concurent clients that + * want to read scan results, this behavior is not + * advisable - Jean II */ + kfree(priv->scan_result); + priv->scan_result = NULL; +#endif /* SCAN_SINGLE_READ */ + /* Here, if too much time has elapsed since last scan, + * we may want to clean up scan results... - Jean II */ + } + + orinoco_unlock(priv, &flags); + return err; +} - case SIOCGIWPOWER: - err = orinoco_ioctl_getpower(dev, &wrq->u.power); - break; +/* Commit handler, called after set operations */ +static int orinoco_ioctl_commit(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + unsigned long flags; + int err = 0; - case SIOCGIWTXPOW: - /* The card only supports one tx power, so this is easy */ - wrq->u.txpower.value = 15; /* dBm */ - wrq->u.txpower.fixed = 1; - wrq->u.txpower.disabled = 0; - wrq->u.txpower.flags = IW_TXPOW_DBM; - break; + if (!priv->open) + return 0; - case SIOCSIWRETRY: - err = -EOPNOTSUPP; - break; + if (priv->broken_disableport) { + orinoco_reset(dev); + return 0; + } - case SIOCGIWRETRY: - err = orinoco_ioctl_getretry(dev, &wrq->u.retry); - break; + if (orinoco_lock(priv, &flags) != 0) + return err; - case SIOCSIWSPY: - err = orinoco_ioctl_setspy(dev, &wrq->u.data); - break; + err = hermes_disable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to disable port " + "while reconfiguring card\n", dev->name); + priv->broken_disableport = 1; + goto out; + } - case SIOCGIWSPY: - err = orinoco_ioctl_getspy(dev, &wrq->u.data); - break; + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_WARNING "%s: Unable to reconfigure card\n", + dev->name); + goto out; + } - case SIOCGIWPRIV: - if (wrq->u.data.pointer) { - struct iw_priv_args privtab[] = { - { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, - { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, - { SIOCIWFIRSTPRIV + 0x2, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_port3" }, - { SIOCIWFIRSTPRIV + 0x3, 0, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_port3" }, - { SIOCIWFIRSTPRIV + 0x4, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_preamble" }, - { SIOCIWFIRSTPRIV + 0x5, 0, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_preamble" }, - { SIOCIWFIRSTPRIV + 0x6, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_ibssport" }, - { SIOCIWFIRSTPRIV + 0x7, 0, - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_ibssport" }, - }; - - wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); - if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab))) - err = -EFAULT; - } - break; - - case SIOCIWFIRSTPRIV + 0x0: /* force_reset */ - case SIOCIWFIRSTPRIV + 0x1: /* card_reset */ - if (! capable(CAP_NET_ADMIN)) { - err = -EPERM; - break; - } - - printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", + dev->name); + goto out; + } + out: + if (err) { + printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); schedule_work(&priv->reset_work); - break; - - case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */ - if (! capable(CAP_NET_ADMIN)) { - err = -EPERM; - break; - } - - err = orinoco_ioctl_setport3(dev, wrq); - if (! err) - changed = 1; - break; + err = 0; + } - case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */ - err = orinoco_ioctl_getport3(dev, wrq); - break; + orinoco_unlock(priv, &flags); + return err; +} - case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */ - if (! capable(CAP_NET_ADMIN)) { - err = -EPERM; - break; - } +static const struct iw_priv_args orinoco_privtab[] = { + { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, + { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, + { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_port3" }, + { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_port3" }, + { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_preamble" }, + { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_preamble" }, + { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_ibssport" }, + { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_ibssport" }, + { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, + "get_rid" }, +}; - /* 802.11b has recently defined some short preamble. - * Basically, the Phy header has been reduced in size. - * This increase performance, especially at high rates - * (the preamble is transmitted at 1Mb/s), unfortunately - * this give compatibility troubles... - Jean II */ - if(priv->has_preamble) { - int val = *( (int *) wrq->u.name ); - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - if (val) - priv->preamble = 1; - else - priv->preamble = 0; - orinoco_unlock(priv, &flags); - changed = 1; - } else - err = -EOPNOTSUPP; - break; - case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */ - if(priv->has_preamble) { - int *val = (int *)wrq->u.name; +/* + * Structures to export the Wireless Handlers + */ - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - *val = priv->preamble; - orinoco_unlock(priv, &flags); - } else - err = -EOPNOTSUPP; - break; - case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */ - if (! capable(CAP_NET_ADMIN)) { - err = -EPERM; - break; - } +static const iw_handler orinoco_handler[] = { + [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) orinoco_ioctl_commit, + [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getname, + [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfreq, + [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfreq, + [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setmode, + [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getmode, + [SIOCSIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setsens, + [SIOCGIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getsens, + [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwrange, + [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setspy, + [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy, + [SIOCSIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap, + [SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap, + [SIOCSIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setscan, + [SIOCGIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getscan, + [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid, + [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid, + [SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick, + [SIOCGIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getnick, + [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrate, + [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrate, + [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrts, + [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrts, + [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfrag, + [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfrag, + [SIOCGIWRETRY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getretry, + [SIOCSIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_setiwencode, + [SIOCGIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwencode, + [SIOCSIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setpower, + [SIOCGIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getpower, +}; - err = orinoco_ioctl_setibssport(dev, wrq); - if (! err) - changed = 1; - break; - case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */ - err = orinoco_ioctl_getibssport(dev, wrq); - break; +/* + Added typecasting since we no longer use iwreq_data -- Moustafa + */ +static const iw_handler orinoco_private_handler[] = { + [0] (iw_handler) orinoco_ioctl_reset, + [1] (iw_handler) orinoco_ioctl_reset, + [2] (iw_handler) orinoco_ioctl_setport3, + [3] (iw_handler) orinoco_ioctl_getport3, + [4] (iw_handler) orinoco_ioctl_setpreamble, + [5] (iw_handler) orinoco_ioctl_getpreamble, + [6] (iw_handler) orinoco_ioctl_setibssport, + [7] (iw_handler) orinoco_ioctl_getibssport, + [9] (iw_handler) orinoco_ioctl_getrid, +}; - default: - err = -EOPNOTSUPP; - } - - if (! err && changed && netif_running(dev)) { - err = orinoco_reconfigure(dev); - } +static const struct iw_handler_def orinoco_handler_def = { + .num_standard = ARRAY_SIZE(orinoco_handler), + .num_private = ARRAY_SIZE(orinoco_private_handler), + .num_private_args = ARRAY_SIZE(orinoco_privtab), + .standard = orinoco_handler, + .private = orinoco_private_handler, + .private_args = orinoco_privtab, +}; - TRACE_EXIT(dev->name); +static void orinoco_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct orinoco_private *priv = netdev_priv(dev); - return err; + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); + strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); + if (dev->class_dev.dev) + strncpy(info->bus_info, dev->class_dev.dev->bus_id, + sizeof(info->bus_info) - 1); + else + snprintf(info->bus_info, sizeof(info->bus_info) - 1, + "PCMCIA %p", priv->hw.iobase); } +static struct ethtool_ops orinoco_ethtool_ops = { + .get_drvinfo = orinoco_get_drvinfo, + .get_link = ethtool_op_get_link, +}; /********************************************************************/ /* Debugging */ diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index f749b50d108..2f213a7103f 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -7,7 +7,7 @@ #ifndef _ORINOCO_H #define _ORINOCO_H -#define DRIVER_VERSION "0.14alpha2" +#define DRIVER_VERSION "0.15rc2" #include <linux/types.h> #include <linux/spinlock.h> @@ -22,6 +22,8 @@ #define WIRELESS_SPY // enable iwspy support +#define MAX_SCAN_LEN 4096 + #define ORINOCO_MAX_KEY_SIZE 14 #define ORINOCO_MAX_KEYS 4 @@ -30,6 +32,20 @@ struct orinoco_key { char data[ORINOCO_MAX_KEY_SIZE]; } __attribute__ ((packed)); +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + u16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + u16 ethertype; +} __attribute__ ((packed)); + typedef enum { FIRMWARE_TYPE_AGERE, FIRMWARE_TYPE_INTERSIL, @@ -48,6 +64,8 @@ struct orinoco_private { /* driver state */ int open; u16 last_linkstatus; + struct work_struct join_work; + struct work_struct wevent_work; /* Net device stuff */ struct net_device *ndev; @@ -74,7 +92,9 @@ struct orinoco_private { unsigned int has_pm:1; unsigned int has_preamble:1; unsigned int has_sensitivity:1; + unsigned int has_hostscan:1; unsigned int broken_disableport:1; + unsigned int broken_monitor:1; /* Configuration paramaters */ u32 iw_mode; @@ -84,6 +104,8 @@ struct orinoco_private { int bitratemode; char nick[IW_ESSID_MAX_SIZE+1]; char desired_essid[IW_ESSID_MAX_SIZE+1]; + char desired_bssid[ETH_ALEN]; + int bssid_fixed; u16 frag_thresh, mwo_robust; u16 channel; u16 ap_density, rts_thresh; @@ -98,6 +120,12 @@ struct orinoco_private { /* Configuration dependent variables */ int port_type, createibss; int promiscuous, mc_count; + + /* Scanning support */ + int scan_inprogress; /* Scan pending... */ + u32 scan_mode; /* Type of scan done */ + char * scan_result; /* Result of previous scan */ + int scan_len; /* Lenght of result */ }; #ifdef ORINOCO_DEBUG diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c index 4481ec18c5a..adc7499136d 100644 --- a/drivers/net/wireless/prism54/isl_38xx.c +++ b/drivers/net/wireless/prism54/isl_38xx.c @@ -112,10 +112,10 @@ isl38xx_handle_wakeup(isl38xx_control_block *control_block, void isl38xx_trigger_device(int asleep, void __iomem *device_base) { - struct timeval current_time; u32 reg, counter = 0; #if VERBOSE > SHOW_ERROR_MESSAGES + struct timeval current_time; DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n"); #endif @@ -126,11 +126,11 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) do_gettimeofday(¤t_time); DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n", current_time.tv_sec, (long)current_time.tv_usec); -#endif DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", current_time.tv_sec, (long)current_time.tv_usec, readl(device_base + ISL38XX_CTRL_STAT_REG)); +#endif udelay(ISL38XX_WRITEIO_DELAY); reg = readl(device_base + ISL38XX_INT_IDENT_REG); @@ -148,10 +148,12 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) counter++; } +#if VERBOSE > SHOW_ERROR_MESSAGES DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", current_time.tv_sec, (long)current_time.tv_usec, readl(device_base + ISL38XX_CTRL_STAT_REG)); +#endif udelay(ISL38XX_WRITEIO_DELAY); #if VERBOSE > SHOW_ERROR_MESSAGES diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index d976790312a..5f4496d8dba 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -1166,7 +1166,7 @@ static void pegasus_set_multicast(struct net_device *net) pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS; if (netif_msg_link(pegasus)) pr_info("%s: Promiscuous mode enabled.\n", net->name); - } else if ((net->mc_count > multicast_filter_limit) || + } else if (net->mc_count || (net->flags & IFF_ALLMULTI)) { pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST; pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS; diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h index 13ccedef5c7..b98f2a83344 100644 --- a/drivers/usb/net/pegasus.h +++ b/drivers/usb/net/pegasus.h @@ -249,6 +249,8 @@ PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, DEFAULT_GPIO_RESET) PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002, DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005, + DEFAULT_GPIO_RESET | PEGASUS_II) PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b, DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1, diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index 8fb223385f2..626b016addf 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -667,7 +667,7 @@ static void rtl8150_set_multicast(struct net_device *netdev) if (netdev->flags & IFF_PROMISC) { dev->rx_creg |= cpu_to_le16(0x0001); info("%s: promiscuous mode", netdev->name); - } else if ((netdev->mc_count > multicast_filter_limit) || + } else if (netdev->mc_count || (netdev->flags & IFF_ALLMULTI)) { dev->rx_creg &= cpu_to_le16(0xfffe); dev->rx_creg |= cpu_to_le16(0x0002); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index bf608808a60..3af7450278b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1284,6 +1284,8 @@ #define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E +#define PCI_DEVICE_ID_NVIDIA_NVENET_14 0x0372 +#define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 #define PCI_VENDOR_ID_IMS 0x10e0 #define PCI_DEVICE_ID_IMS_8849 0x8849 diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h new file mode 100644 index 00000000000..7fe57f957a5 --- /dev/null +++ b/include/net/ieee80211.h @@ -0,0 +1,882 @@ +/* + * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11 + * remains copyright by the original authors + * + * Portions of the merged code are based on Host AP (software wireless + * LAN access point) driver for Intersil Prism2/2.5/3. + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> + * + * Adaption to a generic IEEE 802.11 stack by James Ketrenos + * <jketreno@linux.intel.com> + * Copyright (c) 2004, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + */ +#ifndef IEEE80211_H +#define IEEE80211_H + +#include <linux/if_ether.h> /* ETH_ALEN */ +#include <linux/kernel.h> /* ARRAY_SIZE */ + +#if WIRELESS_EXT < 17 +#define IW_QUAL_QUAL_INVALID 0x10 +#define IW_QUAL_LEVEL_INVALID 0x20 +#define IW_QUAL_NOISE_INVALID 0x40 +#define IW_QUAL_QUAL_UPDATED 0x1 +#define IW_QUAL_LEVEL_UPDATED 0x2 +#define IW_QUAL_NOISE_UPDATED 0x4 +#endif + +#define IEEE80211_DATA_LEN 2304 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + The figure in section 7.1.2 suggests a body size of up to 2312 + bytes is allowed, which is a bit confusing, I suspect this + represents the 2304 bytes of real data, plus a possible 8 bytes of + WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + + +#define IEEE80211_HLEN 30 +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +struct ieee80211_hdr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; +} __attribute__ ((packed)); + +enum eap_type { + EAP_PACKET = 0, + EAPOL_START, + EAPOL_LOGOFF, + EAPOL_KEY, + EAPOL_ENCAP_ASF_ALERT +}; + +static const char *eap_types[] = { + [EAP_PACKET] = "EAP-Packet", + [EAPOL_START] = "EAPOL-Start", + [EAPOL_LOGOFF] = "EAPOL-Logoff", + [EAPOL_KEY] = "EAPOL-Key", + [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert" +}; + +static inline const char *eap_get_type(int type) +{ + return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type]; +} + +struct eapol { + u8 snap[6]; + u16 ethertype; + u8 version; + u8 type; + u16 length; +} __attribute__ ((packed)); + +#define IEEE80211_3ADDR_LEN 24 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_FCS_LEN 4 + +#define MIN_FRAG_THRESHOLD 256U +#define MAX_FRAG_THRESHOLD 2346U + +/* Frame control field constants */ +#define IEEE80211_FCTL_VERS 0x0002 +#define IEEE80211_FCTL_FTYPE 0x000c +#define IEEE80211_FCTL_STYPE 0x00f0 +#define IEEE80211_FCTL_TODS 0x0100 +#define IEEE80211_FCTL_FROMDS 0x0200 +#define IEEE80211_FCTL_MOREFRAGS 0x0400 +#define IEEE80211_FCTL_RETRY 0x0800 +#define IEEE80211_FCTL_PM 0x1000 +#define IEEE80211_FCTL_MOREDATA 0x2000 +#define IEEE80211_FCTL_WEP 0x4000 +#define IEEE80211_FCTL_ORDER 0x8000 + +#define IEEE80211_FTYPE_MGMT 0x0000 +#define IEEE80211_FTYPE_CTL 0x0004 +#define IEEE80211_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE80211_STYPE_ASSOC_REQ 0x0000 +#define IEEE80211_STYPE_ASSOC_RESP 0x0010 +#define IEEE80211_STYPE_REASSOC_REQ 0x0020 +#define IEEE80211_STYPE_REASSOC_RESP 0x0030 +#define IEEE80211_STYPE_PROBE_REQ 0x0040 +#define IEEE80211_STYPE_PROBE_RESP 0x0050 +#define IEEE80211_STYPE_BEACON 0x0080 +#define IEEE80211_STYPE_ATIM 0x0090 +#define IEEE80211_STYPE_DISASSOC 0x00A0 +#define IEEE80211_STYPE_AUTH 0x00B0 +#define IEEE80211_STYPE_DEAUTH 0x00C0 + +/* control */ +#define IEEE80211_STYPE_PSPOLL 0x00A0 +#define IEEE80211_STYPE_RTS 0x00B0 +#define IEEE80211_STYPE_CTS 0x00C0 +#define IEEE80211_STYPE_ACK 0x00D0 +#define IEEE80211_STYPE_CFEND 0x00E0 +#define IEEE80211_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE80211_STYPE_DATA 0x0000 +#define IEEE80211_STYPE_DATA_CFACK 0x0010 +#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 +#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE80211_STYPE_NULLFUNC 0x0040 +#define IEEE80211_STYPE_CFACK 0x0050 +#define IEEE80211_STYPE_CFPOLL 0x0060 +#define IEEE80211_STYPE_CFACKPOLL 0x0070 + +#define IEEE80211_SCTL_FRAG 0x000F +#define IEEE80211_SCTL_SEQ 0xFFF0 + + +/* debug macros */ + +#ifdef CONFIG_IEEE80211_DEBUG +extern u32 ieee80211_debug_level; +#define IEEE80211_DEBUG(level, fmt, args...) \ +do { if (ieee80211_debug_level & (level)) \ + printk(KERN_DEBUG "ieee80211: %c %s " fmt, \ + in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) +#else +#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) +#endif /* CONFIG_IEEE80211_DEBUG */ + +/* + * To use the debug system; + * + * If you are defining a new debug classification, simply add it to the #define + * list here in the form of: + * + * #define IEEE80211_DL_xxxx VALUE + * + * shifting value to the left one bit from the previous entry. xxxx should be + * the name of the classification (for example, WEP) + * + * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your + * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want + * to send output to that classification. + * + * To add your debug level to the list of levels seen when you perform + * + * % cat /proc/net/ipw/debug_level + * + * you simply need to add your entry to the ipw_debug_levels array. + * + * If you do not see debug_level in /proc/net/ipw then you do not have + * CONFIG_IEEE80211_DEBUG defined in your kernel configuration + * + */ + +#define IEEE80211_DL_INFO (1<<0) +#define IEEE80211_DL_WX (1<<1) +#define IEEE80211_DL_SCAN (1<<2) +#define IEEE80211_DL_STATE (1<<3) +#define IEEE80211_DL_MGMT (1<<4) +#define IEEE80211_DL_FRAG (1<<5) +#define IEEE80211_DL_EAP (1<<6) +#define IEEE80211_DL_DROP (1<<7) + +#define IEEE80211_DL_TX (1<<8) +#define IEEE80211_DL_RX (1<<9) + +#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) +#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) +#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a) + +#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a) +#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a) +#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a) +#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a) +#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a) +#define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a) +#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) +#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) +#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <linux/if_arp.h> /* ARPHRD_ETHER */ + +#ifndef WIRELESS_SPY +#define WIRELESS_SPY // enable iwspy support +#endif +#include <net/iw_handler.h> // new driver API + +#ifndef ETH_P_PAE +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#endif /* ETH_P_PAE */ + +#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ + +#ifndef ETH_P_80211_RAW +#define ETH_P_80211_RAW (ETH_P_ECONET + 1) +#endif + +/* IEEE 802.11 defines */ + +#define P80211_OUI_LEN 3 + +struct ieee80211_snap_hdr { + + u8 dsap; /* always 0xAA */ + u8 ssap; /* always 0xAA */ + u8 ctrl; /* always 0x03 */ + u8 oui[P80211_OUI_LEN]; /* organizational universal id */ + +} __attribute__ ((packed)); + +#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) + +#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE) +#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE) + +#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG) +#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ) + +/* Authentication algorithms */ +#define WLAN_AUTH_OPEN 0 +#define WLAN_AUTH_SHARED_KEY 1 + +#define WLAN_AUTH_CHALLENGE_LEN 128 + +#define WLAN_CAPABILITY_BSS (1<<0) +#define WLAN_CAPABILITY_IBSS (1<<1) +#define WLAN_CAPABILITY_CF_POLLABLE (1<<2) +#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) +#define WLAN_CAPABILITY_PRIVACY (1<<4) +#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) +#define WLAN_CAPABILITY_PBCC (1<<6) +#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) + +/* Status codes */ +#define WLAN_STATUS_SUCCESS 0 +#define WLAN_STATUS_UNSPECIFIED_FAILURE 1 +#define WLAN_STATUS_CAPS_UNSUPPORTED 10 +#define WLAN_STATUS_REASSOC_NO_ASSOC 11 +#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12 +#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13 +#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14 +#define WLAN_STATUS_CHALLENGE_FAIL 15 +#define WLAN_STATUS_AUTH_TIMEOUT 16 +#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17 +#define WLAN_STATUS_ASSOC_DENIED_RATES 18 +/* 802.11b */ +#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19 +#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20 +#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21 + +/* Reason codes */ +#define WLAN_REASON_UNSPECIFIED 1 +#define WLAN_REASON_PREV_AUTH_NOT_VALID 2 +#define WLAN_REASON_DEAUTH_LEAVING 3 +#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4 +#define WLAN_REASON_DISASSOC_AP_BUSY 5 +#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6 +#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7 +#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8 +#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 + + +/* Information Element IDs */ +#define WLAN_EID_SSID 0 +#define WLAN_EID_SUPP_RATES 1 +#define WLAN_EID_FH_PARAMS 2 +#define WLAN_EID_DS_PARAMS 3 +#define WLAN_EID_CF_PARAMS 4 +#define WLAN_EID_TIM 5 +#define WLAN_EID_IBSS_PARAMS 6 +#define WLAN_EID_CHALLENGE 16 +#define WLAN_EID_RSN 48 +#define WLAN_EID_GENERIC 221 + +#define IEEE80211_MGMT_HDR_LEN 24 +#define IEEE80211_DATA_HDR3_LEN 24 +#define IEEE80211_DATA_HDR4_LEN 30 + + +#define IEEE80211_STATMASK_SIGNAL (1<<0) +#define IEEE80211_STATMASK_RSSI (1<<1) +#define IEEE80211_STATMASK_NOISE (1<<2) +#define IEEE80211_STATMASK_RATE (1<<3) +#define IEEE80211_STATMASK_WEMASK 0x7 + + +#define IEEE80211_CCK_MODULATION (1<<0) +#define IEEE80211_OFDM_MODULATION (1<<1) + +#define IEEE80211_24GHZ_BAND (1<<0) +#define IEEE80211_52GHZ_BAND (1<<1) + +#define IEEE80211_CCK_RATE_1MB 0x02 +#define IEEE80211_CCK_RATE_2MB 0x04 +#define IEEE80211_CCK_RATE_5MB 0x0B +#define IEEE80211_CCK_RATE_11MB 0x16 +#define IEEE80211_OFDM_RATE_6MB 0x0C +#define IEEE80211_OFDM_RATE_9MB 0x12 +#define IEEE80211_OFDM_RATE_12MB 0x18 +#define IEEE80211_OFDM_RATE_18MB 0x24 +#define IEEE80211_OFDM_RATE_24MB 0x30 +#define IEEE80211_OFDM_RATE_36MB 0x48 +#define IEEE80211_OFDM_RATE_48MB 0x60 +#define IEEE80211_OFDM_RATE_54MB 0x6C +#define IEEE80211_BASIC_RATE_MASK 0x80 + +#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) +#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) +#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) +#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) +#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) +#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) +#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) +#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) +#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) +#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) +#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) +#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) + +#define IEEE80211_CCK_RATES_MASK 0x0000000F +#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ + IEEE80211_CCK_RATE_2MB_MASK) +#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ + IEEE80211_CCK_RATE_5MB_MASK | \ + IEEE80211_CCK_RATE_11MB_MASK) + +#define IEEE80211_OFDM_RATES_MASK 0x00000FF0 +#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ + IEEE80211_OFDM_RATE_12MB_MASK | \ + IEEE80211_OFDM_RATE_24MB_MASK) +#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ + IEEE80211_OFDM_RATE_9MB_MASK | \ + IEEE80211_OFDM_RATE_18MB_MASK | \ + IEEE80211_OFDM_RATE_36MB_MASK | \ + IEEE80211_OFDM_RATE_48MB_MASK | \ + IEEE80211_OFDM_RATE_54MB_MASK) +#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ + IEEE80211_CCK_DEFAULT_RATES_MASK) + +#define IEEE80211_NUM_OFDM_RATES 8 +#define IEEE80211_NUM_CCK_RATES 4 +#define IEEE80211_OFDM_SHIFT_MASK_A 4 + + + + +/* NOTE: This data is for statistical purposes; not all hardware provides this + * information for frames received. Not setting these will not cause + * any adverse affects. */ +struct ieee80211_rx_stats { + u32 mac_time; + s8 rssi; + u8 signal; + u8 noise; + u16 rate; /* in 100 kbps */ + u8 received_channel; + u8 control; + u8 mask; + u8 freq; + u16 len; +}; + +/* IEEE 802.11 requires that STA supports concurrent reception of at least + * three fragmented frames. This define can be increased to support more + * concurrent frames, but it should be noted that each entry can consume about + * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ +#define IEEE80211_FRAG_CACHE_LEN 4 + +struct ieee80211_frag_entry { + unsigned long first_frag_time; + unsigned int seq; + unsigned int last_frag; + struct sk_buff *skb; + u8 src_addr[ETH_ALEN]; + u8 dst_addr[ETH_ALEN]; +}; + +struct ieee80211_stats { + unsigned int tx_unicast_frames; + unsigned int tx_multicast_frames; + unsigned int tx_fragments; + unsigned int tx_unicast_octets; + unsigned int tx_multicast_octets; + unsigned int tx_deferred_transmissions; + unsigned int tx_single_retry_frames; + unsigned int tx_multiple_retry_frames; + unsigned int tx_retry_limit_exceeded; + unsigned int tx_discards; + unsigned int rx_unicast_frames; + unsigned int rx_multicast_frames; + unsigned int rx_fragments; + unsigned int rx_unicast_octets; + unsigned int rx_multicast_octets; + unsigned int rx_fcs_errors; + unsigned int rx_discards_no_buffer; + unsigned int tx_discards_wrong_sa; + unsigned int rx_discards_undecryptable; + unsigned int rx_message_in_msg_fragments; + unsigned int rx_message_in_bad_msg_fragments; +}; + +struct ieee80211_device; + +#define SEC_KEY_1 (1<<0) +#define SEC_KEY_2 (1<<1) +#define SEC_KEY_3 (1<<2) +#define SEC_KEY_4 (1<<3) +#define SEC_ACTIVE_KEY (1<<4) +#define SEC_AUTH_MODE (1<<5) +#define SEC_UNICAST_GROUP (1<<6) +#define SEC_LEVEL (1<<7) +#define SEC_ENABLED (1<<8) + +#define SEC_LEVEL_0 0 /* None */ +#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ +#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ +#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ +#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ + +#define WEP_KEYS 4 +#define WEP_KEY_LEN 13 + +struct ieee80211_security { + u16 active_key:2, + enabled:1, + auth_mode:2, + auth_algo:4, + unicast_uses_group:1; + u8 key_sizes[WEP_KEYS]; + u8 keys[WEP_KEYS][WEP_KEY_LEN]; + u8 level; + u16 flags; +} __attribute__ ((packed)); + + +/* + + 802.11 data frame from AP + + ,-------------------------------------------------------------------. +Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | + |------|------|---------|---------|---------|------|---------|------| +Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs | + | | tion | (BSSID) | | | ence | data | | + `-------------------------------------------------------------------' + +Total: 28-2340 bytes + +*/ + +struct ieee80211_header_data { + u16 frame_ctl; + u16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + u16 seq_ctrl; +}; + +#define BEACON_PROBE_SSID_ID_POSITION 12 + +/* Management Frame Information Element Types */ +#define MFIE_TYPE_SSID 0 +#define MFIE_TYPE_RATES 1 +#define MFIE_TYPE_FH_SET 2 +#define MFIE_TYPE_DS_SET 3 +#define MFIE_TYPE_CF_SET 4 +#define MFIE_TYPE_TIM 5 +#define MFIE_TYPE_IBSS_SET 6 +#define MFIE_TYPE_CHALLENGE 16 +#define MFIE_TYPE_RSN 48 +#define MFIE_TYPE_RATES_EX 50 +#define MFIE_TYPE_GENERIC 221 + +struct ieee80211_info_element_hdr { + u8 id; + u8 len; +} __attribute__ ((packed)); + +struct ieee80211_info_element { + u8 id; + u8 len; + u8 data[0]; +} __attribute__ ((packed)); + +/* + * These are the data types that can make up management packets + * + u16 auth_algorithm; + u16 auth_sequence; + u16 beacon_interval; + u16 capability; + u8 current_ap[ETH_ALEN]; + u16 listen_interval; + struct { + u16 association_id:14, reserved:2; + } __attribute__ ((packed)); + u32 time_stamp[2]; + u16 reason; + u16 status; +*/ + +struct ieee80211_authentication { + struct ieee80211_header_data header; + u16 algorithm; + u16 transaction; + u16 status; + struct ieee80211_info_element info_element; +} __attribute__ ((packed)); + + +struct ieee80211_probe_response { + struct ieee80211_header_data header; + u32 time_stamp[2]; + u16 beacon_interval; + u16 capability; + struct ieee80211_info_element info_element; +} __attribute__ ((packed)); + +struct ieee80211_assoc_request_frame { + u16 capability; + u16 listen_interval; + u8 current_ap[ETH_ALEN]; + struct ieee80211_info_element info_element; +} __attribute__ ((packed)); + +struct ieee80211_assoc_response_frame { + struct ieee80211_hdr_3addr header; + u16 capability; + u16 status; + u16 aid; + struct ieee80211_info_element info_element; /* supported rates */ +} __attribute__ ((packed)); + + +struct ieee80211_txb { + u8 nr_frags; + u8 encrypted; + u16 reserved; + u16 frag_size; + u16 payload_size; + struct sk_buff *fragments[0]; +}; + + +/* SWEEP TABLE ENTRIES NUMBER*/ +#define MAX_SWEEP_TAB_ENTRIES 42 +#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 +/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs + * only use 8, and then use extended rates for the remaining supported + * rates. Other APs, however, stick all of their supported rates on the + * main rates information element... */ +#define MAX_RATES_LENGTH ((u8)12) +#define MAX_RATES_EX_LENGTH ((u8)16) +#define MAX_NETWORK_COUNT 128 + +#define CRC_LENGTH 4U + +#define MAX_WPA_IE_LEN 64 + +#define NETWORK_EMPTY_ESSID (1<<0) +#define NETWORK_HAS_OFDM (1<<1) +#define NETWORK_HAS_CCK (1<<2) + +struct ieee80211_network { + /* These entries are used to identify a unique network */ + u8 bssid[ETH_ALEN]; + u8 channel; + /* Ensure null-terminated for any debug msgs */ + u8 ssid[IW_ESSID_MAX_SIZE + 1]; + u8 ssid_len; + + /* These are network statistics */ + struct ieee80211_rx_stats stats; + u16 capability; + u8 rates[MAX_RATES_LENGTH]; + u8 rates_len; + u8 rates_ex[MAX_RATES_EX_LENGTH]; + u8 rates_ex_len; + unsigned long last_scanned; + u8 mode; + u8 flags; + u32 last_associate; + u32 time_stamp[2]; + u16 beacon_interval; + u16 listen_interval; + u16 atim_window; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + u8 rsn_ie[MAX_WPA_IE_LEN]; + size_t rsn_ie_len; + struct list_head list; +}; + +enum ieee80211_state { + IEEE80211_UNINITIALIZED = 0, + IEEE80211_INITIALIZED, + IEEE80211_ASSOCIATING, + IEEE80211_ASSOCIATED, + IEEE80211_AUTHENTICATING, + IEEE80211_AUTHENTICATED, + IEEE80211_SHUTDOWN +}; + +#define DEFAULT_MAX_SCAN_AGE (15 * HZ) +#define DEFAULT_FTS 2346 +#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" +#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] + + +extern inline int is_broadcast_ether_addr(const u8 *addr) +{ + return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \ + (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff)); +} + +#define CFG_IEEE80211_RESERVE_FCS (1<<0) +#define CFG_IEEE80211_COMPUTE_FCS (1<<1) + +struct ieee80211_device { + struct net_device *dev; + + /* Bookkeeping structures */ + struct net_device_stats stats; + struct ieee80211_stats ieee_stats; + + /* Probe / Beacon management */ + struct list_head network_free_list; + struct list_head network_list; + struct ieee80211_network *networks; + int scans; + int scan_age; + + int iw_mode; /* operating mode (IW_MODE_*) */ + + spinlock_t lock; + + int tx_headroom; /* Set to size of any additional room needed at front + * of allocated Tx SKBs */ + u32 config; + + /* WEP and other encryption related settings at the device level */ + int open_wep; /* Set to 1 to allow unencrypted frames */ + + int reset_on_keychange; /* Set to 1 if the HW needs to be reset on + * WEP key changes */ + + /* If the host performs {en,de}cryption, then set to 1 */ + int host_encrypt; + int host_decrypt; + int ieee802_1x; /* is IEEE 802.1X used */ + + /* WPA data */ + int wpa_enabled; + int drop_unencrypted; + int tkip_countermeasures; + int privacy_invoked; + size_t wpa_ie_len; + u8 *wpa_ie; + + struct list_head crypt_deinit_list; + struct ieee80211_crypt_data *crypt[WEP_KEYS]; + int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ + struct timer_list crypt_deinit_timer; + + int bcrx_sta_key; /* use individual keys to override default keys even + * with RX of broad/multicast frames */ + + /* Fragmentation structures */ + struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN]; + unsigned int frag_next_idx; + u16 fts; /* Fragmentation Threshold */ + + /* Association info */ + u8 bssid[ETH_ALEN]; + + enum ieee80211_state state; + + int mode; /* A, B, G */ + int modulation; /* CCK, OFDM */ + int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ + int abg_ture; /* ABG flag */ + + /* Callback functions */ + void (*set_security)(struct net_device *dev, + struct ieee80211_security *sec); + int (*hard_start_xmit)(struct ieee80211_txb *txb, + struct net_device *dev); + int (*reset_port)(struct net_device *dev); + + /* This must be the last item so that it points to the data + * allocated beyond this structure by alloc_ieee80211 */ + u8 priv[0]; +}; + +#define IEEE_A (1<<0) +#define IEEE_B (1<<1) +#define IEEE_G (1<<2) +#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) + +extern inline void *ieee80211_priv(struct net_device *dev) +{ + return ((struct ieee80211_device *)netdev_priv(dev))->priv; +} + +extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) +{ + /* Single white space is for Linksys APs */ + if (essid_len == 1 && essid[0] == ' ') + return 1; + + /* Otherwise, if the entire essid is 0, we assume it is hidden */ + while (essid_len) { + essid_len--; + if (essid[essid_len] != '\0') + return 0; + } + + return 1; +} + +extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) +{ + /* + * It is possible for both access points and our device to support + * combinations of modes, so as long as there is one valid combination + * of ap/device supported modes, then return success + * + */ + if ((mode & IEEE_A) && + (ieee->modulation & IEEE80211_OFDM_MODULATION) && + (ieee->freq_band & IEEE80211_52GHZ_BAND)) + return 1; + + if ((mode & IEEE_G) && + (ieee->modulation & IEEE80211_OFDM_MODULATION) && + (ieee->freq_band & IEEE80211_24GHZ_BAND)) + return 1; + + if ((mode & IEEE_B) && + (ieee->modulation & IEEE80211_CCK_MODULATION) && + (ieee->freq_band & IEEE80211_24GHZ_BAND)) + return 1; + + return 0; +} + +extern inline int ieee80211_get_hdrlen(u16 fc) +{ + int hdrlen = 24; + + switch (WLAN_FC_GET_TYPE(fc)) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) + hdrlen = 30; /* Addr4 */ + break; + case IEEE80211_FTYPE_CTL: + switch (WLAN_FC_GET_STYPE(fc)) { + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + default: + hdrlen = 16; + break; + } + break; + } + + return hdrlen; +} + + + +/* ieee80211.c */ +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); + +extern int ieee80211_set_encryption(struct ieee80211_device *ieee); + +/* ieee80211_tx.c */ + + +extern int ieee80211_xmit(struct sk_buff *skb, + struct net_device *dev); +extern void ieee80211_txb_free(struct ieee80211_txb *); + + +/* ieee80211_rx.c */ +extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, + struct ieee80211_rx_stats *rx_stats); +extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, + struct ieee80211_hdr *header, + struct ieee80211_rx_stats *stats); + +/* iee80211_wx.c */ +extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key); +extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key); +extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key); + + +extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) +{ + ieee->scans++; +} + +extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) +{ + return ieee->scans; +} + +static inline const char *escape_essid(const char *essid, u8 essid_len) { + static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; + const char *s = essid; + char *d = escaped; + + if (ieee80211_is_empty_essid(essid, essid_len)) { + memcpy(escaped, "<hidden>", sizeof("<hidden>")); + return escaped; + } + + essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE); + while (essid_len--) { + if (*s == '\0') { + *d++ = '\\'; + *d++ = '0'; + s++; + } else { + *d++ = *s++; + } + } + *d = '\0'; + return escaped; +} + +#endif /* IEEE80211_H */ |