aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h21
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-scan.c42
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c289
3 files changed, 51 insertions, 301 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 2f23f78296e..409caaa31bb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -316,9 +316,30 @@ void iwl_init_scan_params(struct iwl_priv *priv);
int iwl_scan_cancel(struct iwl_priv *priv);
int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
int iwl_scan_initiate(struct iwl_priv *priv);
+u16 iwl_fill_probe_req(struct iwl_priv *priv, enum ieee80211_band band,
+ struct ieee80211_mgmt *frame, int left);
void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
+u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ u8 n_probes);
+u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band);
+void iwl_bg_scan_check(struct work_struct *data);
+void iwl_bg_abort_scan(struct work_struct *work);
+void iwl_bg_scan_completed(struct work_struct *work);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
+/* For faster active scanning, scan will move to the next channel if fewer than
+ * PLCP_QUIET_THRESH packets are heard on this channel within
+ * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
+ * time if it's a quiet channel (nothing responded to our probe, and there's
+ * no other traffic).
+ * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
+#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */
+#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
+
+#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
/*******************************************************************************
* Calibrations - implemented in iwl-calib.c
******************************************************************************/
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index e510f516599..0ce122a1734 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -46,15 +46,6 @@
#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
-/* For faster active scanning, scan will move to the next channel if fewer than
- * PLCP_QUIET_THRESH packets are heard on this channel within
- * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
- * time if it's a quiet channel (nothing responded to our probe, and there's
- * no other traffic).
- * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
-#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
-#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */
-
/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
* Must be set longer than active dwell time.
* For the most reliable scan, set > AP beacon interval (typically 100msec). */
@@ -63,7 +54,6 @@
#define IWL_PASSIVE_DWELL_BASE (100)
#define IWL_CHANNEL_TUNE_TIME 5
-#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
/**
@@ -296,9 +286,9 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
-static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 n_probes)
+inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ u8 n_probes)
{
if (band == IEEE80211_BAND_5GHZ)
return IWL_ACTIVE_DWELL_TIME_52 +
@@ -307,9 +297,10 @@ static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
return IWL_ACTIVE_DWELL_TIME_24 +
IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
}
+EXPORT_SYMBOL(iwl_get_active_dwell_time);
-static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band)
+u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band)
{
u16 passive = (band == IEEE80211_BAND_2GHZ) ?
IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
@@ -327,6 +318,7 @@ static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
return passive;
}
+EXPORT_SYMBOL(iwl_get_passive_dwell_time);
static int iwl_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -450,7 +442,7 @@ EXPORT_SYMBOL(iwl_scan_initiate);
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-static void iwl_bg_scan_check(struct work_struct *data)
+void iwl_bg_scan_check(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, scan_check.work);
@@ -470,6 +462,8 @@ static void iwl_bg_scan_check(struct work_struct *data)
}
mutex_unlock(&priv->mutex);
}
+EXPORT_SYMBOL(iwl_bg_scan_check);
+
/**
* iwl_supported_rate_to_ie - fill in the supported rate in IE field
*
@@ -527,10 +521,10 @@ static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
* iwl_fill_probe_req - fill in all required fields and IE for probe request
*/
-static u16 iwl_fill_probe_req(struct iwl_priv *priv,
- enum ieee80211_band band,
- struct ieee80211_mgmt *frame,
- int left)
+u16 iwl_fill_probe_req(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ struct ieee80211_mgmt *frame,
+ int left)
{
int len = 0;
u8 *pos = NULL;
@@ -624,6 +618,7 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv,
return (u16)len;
}
+EXPORT_SYMBOL(iwl_fill_probe_req);
static void iwl_bg_request_scan(struct work_struct *data)
{
@@ -839,7 +834,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
mutex_unlock(&priv->mutex);
}
-static void iwl_bg_abort_scan(struct work_struct *work)
+void iwl_bg_abort_scan(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
@@ -853,8 +848,9 @@ static void iwl_bg_abort_scan(struct work_struct *work)
mutex_unlock(&priv->mutex);
}
+EXPORT_SYMBOL(iwl_bg_abort_scan);
-static void iwl_bg_scan_completed(struct work_struct *work)
+void iwl_bg_scan_completed(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, scan_completed);
@@ -872,7 +868,7 @@ static void iwl_bg_scan_completed(struct work_struct *work)
iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
mutex_unlock(&priv->mutex);
}
-
+EXPORT_SYMBOL(iwl_bg_scan_completed);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 997ac33500f..c7bb9c19a90 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -791,47 +791,6 @@ static int iwl3945_send_bt_config(struct iwl_priv *priv)
sizeof(bt_cmd), &bt_cmd);
}
-static int iwl3945_send_scan_abort(struct iwl_priv *priv)
-{
- int rc = 0;
- struct iwl_rx_packet *res;
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_ABORT_CMD,
- .meta.flags = CMD_WANT_SKB,
- };
-
- /* If there isn't a scan actively going on in the hardware
- * then we are in between scan bands and not actually
- * actively scanning, so don't send the abort command */
- if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- return 0;
- }
-
- rc = iwl_send_cmd_sync(priv, &cmd);
- if (rc) {
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- return rc;
- }
-
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
- if (res->u.status != CAN_ABORT_STATUS) {
- /* The scan abort will return 1 for success or
- * 2 for "failure". A failure condition can be
- * due to simply not being in an active scan which
- * can occur if we send the scan abort before we
- * the microcode has notified us that a scan is
- * completed. */
- IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- clear_bit(STATUS_SCAN_HW, &priv->status);
- }
-
- dev_kfree_skb_any(cmd.meta.u.skb);
-
- return rc;
-}
-
static int iwl3945_add_sta_sync_callback(struct iwl_priv *priv,
struct iwl_cmd *cmd, struct sk_buff *skb)
{
@@ -1168,115 +1127,6 @@ static void iwl3945_unset_hw_params(struct iwl_priv *priv)
priv->shared_phys);
}
-/**
- * iwl3945_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl3945_supported_rate_to_ie(u8 *ie, u16 supported_rate,
- u16 basic_rate, int *left)
-{
- u16 ret_rates = 0, bit;
- int i;
- u8 *cnt = ie;
- u8 *rates = ie + 1;
-
- for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
- if (bit & supported_rate) {
- ret_rates |= bit;
- rates[*cnt] = iwl3945_rates[i].ieee |
- ((bit & basic_rate) ? 0x80 : 0x00);
- (*cnt)++;
- (*left)--;
- if ((*left <= 0) ||
- (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
- break;
- }
- }
-
- return ret_rates;
-}
-
-/**
- * iwl3945_fill_probe_req - fill in all required fields and IE for probe request
- */
-static u16 iwl3945_fill_probe_req(struct iwl_priv *priv,
- struct ieee80211_mgmt *frame,
- int left)
-{
- int len = 0;
- u8 *pos = NULL;
- u16 active_rates, ret_rates, cck_rates;
-
- /* Make sure there is enough space for the probe request,
- * two mandatory IEs and the data */
- left -= 24;
- if (left < 0)
- return 0;
- len += 24;
-
- frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
- memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
- memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
- memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
- frame->seq_ctrl = 0;
-
- /* fill in our indirect SSID IE */
- /* ...next IE... */
-
- left -= 2;
- if (left < 0)
- return 0;
- len += 2;
- pos = &(frame->u.probe_req.variable[0]);
- *pos++ = WLAN_EID_SSID;
- *pos++ = 0;
-
- /* fill in supported rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
-
- /* ... fill it in... */
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos = 0;
-
- priv->active_rate = priv->rates_mask;
- active_rates = priv->active_rate;
- priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
-
- cck_rates = IWL_CCK_RATES_MASK & active_rates;
- ret_rates = iwl3945_supported_rate_to_ie(pos, cck_rates,
- priv->active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- ret_rates = iwl3945_supported_rate_to_ie(pos, active_rates,
- priv->active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- len += 2 + *pos;
- pos += (*pos) + 1;
- if (active_rates == 0)
- goto fill_end;
-
- /* fill in supported extended rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
- /* ... fill it in... */
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos = 0;
- iwl3945_supported_rate_to_ie(pos, active_rates,
- priv->active_rate_basic, &left);
- if (*pos > 0)
- len += 2 + *pos;
-
- fill_end:
- return (u16)len;
-}
-
/*
* QoS support
*/
@@ -3955,66 +3805,6 @@ static void iwl3945_free_channel_map(struct iwl_priv *priv)
priv->channel_count = 0;
}
-/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
- * sending probe req. This should be set long enough to hear probe responses
- * from more than one AP. */
-#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52 (20)
-
-#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
-#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
-
-/* For faster active scanning, scan will move to the next channel if fewer than
- * PLCP_QUIET_THRESH packets are heard on this channel within
- * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
- * time if it's a quiet channel (nothing responded to our probe, and there's
- * no other traffic).
- * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
-#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
-#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */
-
-/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
- * Must be set longer than active dwell time.
- * For the most reliable scan, set > AP beacon interval (typically 100msec). */
-#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
-#define IWL_PASSIVE_DWELL_TIME_52 (10)
-#define IWL_PASSIVE_DWELL_BASE (100)
-#define IWL_CHANNEL_TUNE_TIME 5
-
-#define IWL_SCAN_PROBE_MASK(n) (BIT(n) | (BIT(n) - BIT(1)))
-
-static inline u16 iwl3945_get_active_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 n_probes)
-{
- if (band == IEEE80211_BAND_5GHZ)
- return IWL_ACTIVE_DWELL_TIME_52 +
- IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
- else
- return IWL_ACTIVE_DWELL_TIME_24 +
- IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
-}
-
-static u16 iwl3945_get_passive_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band)
-{
- u16 passive = (band == IEEE80211_BAND_2GHZ) ?
- IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
- IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
-
- if (iwl3945_is_associated(priv)) {
- /* If we're associated, we clamp the maximum passive
- * dwell time to be 98% of the beacon interval (minus
- * 2 * channel tune time) */
- passive = priv->beacon_int;
- if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
- passive = IWL_PASSIVE_DWELL_BASE;
- passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
- }
-
- return passive;
-}
-
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
@@ -4033,8 +3823,8 @@ static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
channels = sband->channels;
- active_dwell = iwl3945_get_active_dwell_time(priv, band, n_probes);
- passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
+ active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
@@ -5135,28 +4925,6 @@ static void iwl3945_rfkill_poll(struct work_struct *data)
}
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-
-static void iwl3945_bg_scan_check(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, scan_check.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- if (test_bit(STATUS_SCANNING, &priv->status) ||
- test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
- "Scan completion watchdog resetting adapter (%dms)\n",
- jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- iwl3945_send_scan_abort(priv);
- }
- mutex_unlock(&priv->mutex);
-}
-
static void iwl3945_bg_request_scan(struct work_struct *data)
{
struct iwl_priv *priv =
@@ -5284,9 +5052,6 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
/* We don't build a direct scan probe request; the uCode will do
* that based on the direct_mask added to each channel entry */
- scan->tx_cmd.len = cpu_to_le16(
- iwl3945_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
@@ -5307,6 +5072,11 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
goto done;
}
+ scan->tx_cmd.len = cpu_to_le16(
+ iwl_fill_probe_req(priv, band,
+ (struct ieee80211_mgmt *)scan->data,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
@@ -5482,45 +5252,8 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
}
-static void iwl3945_bg_abort_scan(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
-
- if (!iwl_is_ready(priv))
- return;
-
- mutex_lock(&priv->mutex);
-
- set_bit(STATUS_SCAN_ABORTING, &priv->status);
- iwl3945_send_scan_abort(priv);
-
- mutex_unlock(&priv->mutex);
-}
-
static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
-static void iwl3945_bg_scan_completed(struct work_struct *work)
-{
- struct iwl_priv *priv =
- container_of(work, struct iwl_priv, scan_completed);
-
- IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n");
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (test_bit(STATUS_CONF_PENDING, &priv->status))
- iwl3945_mac_config(priv->hw, 0);
-
- ieee80211_scan_completed(priv->hw);
-
- /* Since setting the TXPOWER may have been deferred while
- * performing the scan, fire one off */
- mutex_lock(&priv->mutex);
- priv->cfg->ops->lib->send_tx_power(priv);
- mutex_unlock(&priv->mutex);
-}
-
/*****************************************************************************
*
* mac80211 entry point functions
@@ -6821,15 +6554,15 @@ static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
INIT_WORK(&priv->up, iwl3945_bg_up);
INIT_WORK(&priv->restart, iwl3945_bg_restart);
INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
- INIT_WORK(&priv->scan_completed, iwl3945_bg_scan_completed);
- INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
- INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill);
INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
- INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
INIT_DELAYED_WORK(&priv->rfkill_poll, iwl3945_rfkill_poll);
+ INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+ INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
+ INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+ INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
iwl3945_hw_setup_deferred_work(priv);