diff options
32 files changed, 12 insertions, 4364 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 6bdeeb70b15..c1b34eb383c 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -573,24 +573,9 @@ choice Select PReP if configuring for a PReP machine. - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - <http://www.synergymicro.com/PressRel/97_10_15.html>. - - Select APUS if configuring for a PowerUP Amiga. More information is - available at: <http://linux-apus.sourceforge.net/>. - config PPC_PREP bool "PReP" -config APUS - bool "Amiga-APUS" - depends on BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - <http://linux-apus.sourceforge.net/>. - config KATANA bool "Artesyn-Katana" help @@ -1027,132 +1012,6 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. -config AMIGA - bool - depends on APUS - default y - help - This option enables support for the Amiga series of computers. - -config ZORRO - bool - depends on APUS - default y - help - This enables support for the Zorro bus in the Amiga. If you have - expansion cards in your Amiga that conform to the Amiga - AutoConfig(tm) specification, say Y, otherwise N. Note that even - expansion cards that do not fit in the Zorro slots but fit in e.g. - the CPU slot may fall in this category, so you have to say Y to let - Linux use these. - -config ABSTRACT_CONSOLE - bool - depends on APUS - default y - -config APUS_FAST_EXCEPT - bool - depends on APUS - default y - -config AMIGA_PCMCIA - bool "Amiga 1200/600 PCMCIA support" - depends on APUS && EXPERIMENTAL - help - Include support in the kernel for pcmcia on Amiga 1200 and Amiga - 600. If you intend to use pcmcia cards say Y; otherwise say N. - -config AMIGA_BUILTIN_SERIAL - tristate "Amiga builtin serial support" - depends on APUS - help - If you want to use your Amiga's built-in serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config GVPIOEXT - tristate "GVP IO-Extender support" - depends on APUS - help - If you want to use a GVP IO-Extender serial card in Linux, say Y. - Otherwise, say N. - -config GVPIOEXT_LP - tristate "GVP IO-Extender parallel printer support" - depends on GVPIOEXT - help - Say Y to enable driving a printer from the parallel port on your - GVP IO-Extender card, N otherwise. - -config GVPIOEXT_PLIP - tristate "GVP IO-Extender PLIP support" - depends on GVPIOEXT - help - Say Y to enable doing IP over the parallel port on your GVP - IO-Extender card, N otherwise. - -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on APUS - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config A2232 - tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && APUS - ---help--- - This option supports the 2232 7-port serial card shipped with the - Amiga 2000 and other Zorro-bus machines, dating from 1989. At - a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip - each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The - ports were connected with 8 pin DIN connectors on the card bracket, - for which 8 pin to DB25 adapters were supplied. The card also had - jumpers internally to toggle various pinning configurations. - - This driver can be built as a module; but then "generic_serial" - will also be built as a module. This has to be loaded before - "ser_a2232". If you want to do this, answer M here. - -config WHIPPET_SERIAL - tristate "Hisoft Whippet PCMCIA serial support" - depends on AMIGA_PCMCIA - help - HiSoft has a web page at <http://www.hisoft.co.uk/>, but there - is no listing for the Whippet in their Amiga section. - -config APNE - tristate "PCMCIA NE2000 support" - depends on AMIGA_PCMCIA - help - If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, - say N. - - To compile this driver as a module, choose M here: the - module will be called apne. - -config SERIAL_CONSOLE - bool "Support for serial port console" - depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y) - -config HEARTBEAT - bool "Use power LED as a heartbeat" - depends on APUS - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. - -config PROC_HARDWARE - bool "/proc/hardware support" - depends on APUS - -source "drivers/zorro/Kconfig" - if !44x || BROKEN source kernel/power/Kconfig endif @@ -1227,8 +1086,7 @@ config MCA config PCI bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx - default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx - default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS + default y if !40x && !CPM2 && !8xx && !83xx && !85xx default PCI_QSPAN if !4xx && !CPM2 && 8xx help Find out whether your system includes a PCI bus. PCI is the name of @@ -1284,10 +1142,6 @@ config 8260_PCI9_IDMA4 endchoice -config PCI_PERMEDIA - bool "PCI for Permedia2" - depends on !4xx && !8xx && APUS - source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 0db66dcf072..eee6264e8a0 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -69,7 +69,6 @@ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/ppc/xmon/ -core-$(CONFIG_APUS) += arch/ppc/amiga/ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ diff --git a/arch/ppc/amiga/Makefile b/arch/ppc/amiga/Makefile deleted file mode 100644 index 59fec0a3ac8..00000000000 --- a/arch/ppc/amiga/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Linux arch/m68k/amiga source directory -# - -obj-y := config.o amiints.o cia.o time.o bootinfo.o amisound.o \ - chipram.o amiga_ksyms.o - -obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o diff --git a/arch/ppc/amiga/amiga_ksyms.c b/arch/ppc/amiga/amiga_ksyms.c deleted file mode 100644 index ec74e5b7a1c..00000000000 --- a/arch/ppc/amiga/amiga_ksyms.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../m68k/amiga/amiga_ksyms.c" diff --git a/arch/ppc/amiga/amiints.c b/arch/ppc/amiga/amiints.c deleted file mode 100644 index 265fcd3c6ab..00000000000 --- a/arch/ppc/amiga/amiints.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Amiga Linux interrupt handling code - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - * 11/07/96: rewritten interrupt handling, irq lists are exists now only for - * this sources where it makes sense (VERTB/PORTS/EXTER) and you must - * be careful that dev_id for this sources is unique since this the - * only possibility to distinguish between different handlers for - * free_irq. irq lists also have different irq flags: - * - IRQ_FLG_FAST: handler is inserted at top of list (after other - * fast handlers) - * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before - * they're executed irq level is set to the previous - * one, but handlers don't need to be reentrant, if - * reentrance occurred, slow handlers will be just - * called again. - * The whole interrupt handling for CIAs is moved to cia.c - * /Roman Zippel - * - * 07/08/99: rewamp of the interrupt handling - we now have two types of - * interrupts, normal and fast handlers, fast handlers being - * marked with SA_INTERRUPT and runs with all other interrupts - * disabled. Normal interrupts disable their own source but - * run with all other interrupt sources enabled. - * PORTS and EXTER interrupts are always shared even if the - * drivers do not explicitly mark this when calling - * request_irq which they really should do. - * This is similar to the way interrupts are handled on all - * other architectures and makes a ton of sense besides - * having the advantage of making it easier to share - * drivers. - * /Jes - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/init.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/traps.h> -#include <asm/amigahw.h> -#include <asm/amigaints.h> -#include <asm/amipcmcia.h> - -#ifdef CONFIG_APUS -#include <asm/amigappc.h> -#endif - -extern void cia_init_IRQ(struct ciabase *base); - -unsigned short ami_intena_vals[AMI_STD_IRQS] = { - IF_VERTB, IF_COPER, IF_AUD0, IF_AUD1, IF_AUD2, IF_AUD3, IF_BLIT, - IF_DSKSYN, IF_DSKBLK, IF_RBF, IF_TBE, IF_SOFT, IF_PORTS, IF_EXTER -}; -static const unsigned char ami_servers[AMI_STD_IRQS] = { - 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1 -}; - -static short ami_ablecount[AMI_IRQS]; - -static void ami_badint(int irq, void *dev_id, struct pt_regs *fp) -{ -/* num_spurious += 1;*/ -} - -/* - * void amiga_init_IRQ(void) - * - * Parameters: None - * - * Returns: Nothing - * - * This function should be called during kernel startup to initialize - * the amiga IRQ handling routines. - */ - -__init -void amiga_init_IRQ(void) -{ - int i; - - for (i = 0; i < AMI_IRQS; i++) - ami_ablecount[i] = 0; - - /* turn off PCMCIA interrupts */ - if (AMIGAHW_PRESENT(PCMCIA)) - gayle.inten = GAYLE_IRQ_IDE; - - /* turn off all interrupts... */ - amiga_custom.intena = 0x7fff; - amiga_custom.intreq = 0x7fff; - -#ifdef CONFIG_APUS - /* Clear any inter-CPU interrupt requests. Circumvents bug in - Blizzard IPL emulation HW (or so it appears). */ - APUS_WRITE(APUS_INT_LVL, INTLVL_SETRESET | INTLVL_MASK); - - /* Init IPL emulation. */ - APUS_WRITE(APUS_REG_INT, REGINT_INTMASTER | REGINT_ENABLEIPL); - APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT); - APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET | IPLEMU_IPLMASK); -#endif - /* ... and enable the master interrupt bit */ - amiga_custom.intena = IF_SETCLR | IF_INTEN; - - cia_init_IRQ(&ciaa_base); - cia_init_IRQ(&ciab_base); -} - -/* - * Enable/disable a particular machine specific interrupt source. - * Note that this may affect other interrupts in case of a shared interrupt. - * This function should only be called for a _very_ short time to change some - * internal data, that may not be changed by the interrupt at the same time. - * ami_(enable|disable)_irq calls may also be nested. - */ - -void amiga_enable_irq(unsigned int irq) -{ - if (irq >= AMI_IRQS) { - printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq); - return; - } - - ami_ablecount[irq]--; - if (ami_ablecount[irq]<0) - ami_ablecount[irq]=0; - else if (ami_ablecount[irq]) - return; - - /* No action for auto-vector interrupts */ - if (irq >= IRQ_AMIGA_AUTO){ - printk("%s: Trying to enable auto-vector IRQ %i\n", - __FUNCTION__, irq - IRQ_AMIGA_AUTO); - return; - } - - if (irq >= IRQ_AMIGA_CIAA) { - cia_set_irq(irq, 0); - cia_able_irq(irq, 1); - return; - } - - /* enable the interrupt */ - amiga_custom.intena = IF_SETCLR | ami_intena_vals[irq]; -} - -void amiga_disable_irq(unsigned int irq) -{ - if (irq >= AMI_IRQS) { - printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq); - return; - } - - if (ami_ablecount[irq]++) - return; - - /* No action for auto-vector interrupts */ - if (irq >= IRQ_AMIGA_AUTO) { - printk("%s: Trying to disable auto-vector IRQ %i\n", - __FUNCTION__, irq - IRQ_AMIGA_AUTO); - return; - } - - if (irq >= IRQ_AMIGA_CIAA) { - cia_able_irq(irq, 0); - return; - } - - /* disable the interrupt */ - amiga_custom.intena = ami_intena_vals[irq]; -} - -inline void amiga_do_irq(int irq, struct pt_regs *fp) -{ - irq_desc_t *desc = irq_desc + irq; - struct irqaction *action = desc->action; - - kstat_cpu(0).irqs[irq]++; - action->handler(irq, action->dev_id, fp); -} - -void amiga_do_irq_list(int irq, struct pt_regs *fp) -{ - irq_desc_t *desc = irq_desc + irq; - struct irqaction *action; - - kstat_cpu(0).irqs[irq]++; - - amiga_custom.intreq = ami_intena_vals[irq]; - - for (action = desc->action; action; action = action->next) - action->handler(irq, action->dev_id, fp); -} - -/* - * The builtin Amiga hardware interrupt handlers. - */ - -static void ami_int1(int irq, void *dev_id, struct pt_regs *fp) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial transmit buffer empty, interrupt */ - if (ints & IF_TBE) { - amiga_custom.intreq = IF_TBE; - amiga_do_irq(IRQ_AMIGA_TBE, fp); - } - - /* if floppy disk transfer complete, interrupt */ - if (ints & IF_DSKBLK) { - amiga_custom.intreq = IF_DSKBLK; - amiga_do_irq(IRQ_AMIGA_DSKBLK, fp); - } - - /* if software interrupt set, interrupt */ - if (ints & IF_SOFT) { - amiga_custom.intreq = IF_SOFT; - amiga_do_irq(IRQ_AMIGA_SOFT, fp); - } -} - -static void ami_int3(int irq, void *dev_id, struct pt_regs *fp) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if a blitter interrupt */ - if (ints & IF_BLIT) { - amiga_custom.intreq = IF_BLIT; - amiga_do_irq(IRQ_AMIGA_BLIT, fp); - } - - /* if a copper interrupt */ - if (ints & IF_COPER) { - amiga_custom.intreq = IF_COPER; - amiga_do_irq(IRQ_AMIGA_COPPER, fp); - } - - /* if a vertical blank interrupt */ - if (ints & IF_VERTB) - amiga_do_irq_list(IRQ_AMIGA_VERTB, fp); -} - -static void ami_int4(int irq, void *dev_id, struct pt_regs *fp) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if audio 0 interrupt */ - if (ints & IF_AUD0) { - amiga_custom.intreq = IF_AUD0; - amiga_do_irq(IRQ_AMIGA_AUD0, fp); - } - - /* if audio 1 interrupt */ - if (ints & IF_AUD1) { - amiga_custom.intreq = IF_AUD1; - amiga_do_irq(IRQ_AMIGA_AUD1, fp); - } - - /* if audio 2 interrupt */ - if (ints & IF_AUD2) { - amiga_custom.intreq = IF_AUD2; - amiga_do_irq(IRQ_AMIGA_AUD2, fp); - } - - /* if audio 3 interrupt */ - if (ints & IF_AUD3) { - amiga_custom.intreq = IF_AUD3; - amiga_do_irq(IRQ_AMIGA_AUD3, fp); - } -} - -static void ami_int5(int irq, void *dev_id, struct pt_regs *fp) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial receive buffer full interrupt */ - if (ints & IF_RBF) { - /* acknowledge of IF_RBF must be done by the serial interrupt */ - amiga_do_irq(IRQ_AMIGA_RBF, fp); - } - - /* if a disk sync interrupt */ - if (ints & IF_DSKSYN) { - amiga_custom.intreq = IF_DSKSYN; - amiga_do_irq(IRQ_AMIGA_DSKSYN, fp); - } -} - -static void ami_int7(int irq, void *dev_id, struct pt_regs *fp) -{ - panic ("level 7 interrupt received\n"); -} - -#ifdef CONFIG_APUS -/* The PPC irq handling links all handlers requested on the same vector - and executes them in a loop. Having ami_badint at the end of the chain - is a bad idea. */ -struct irqaction amiga_sys_irqaction[AUTO_IRQS] = { - { .handler = ami_badint, .name = "spurious int" }, - { .handler = ami_int1, .name = "int1 handler" }, - { 0, /* CIAA */ }, - { .handler = ami_int3, .name = "int3 handler" }, - { .handler = ami_int4, .name = "int4 handler" }, - { .handler = ami_int5, .name = "int5 handler" }, - { 0, /* CIAB */ }, - { .handler = ami_int7, .name = "int7 handler" }, -}; -#else -void (*amiga_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = { - ami_badint, ami_int1, ami_badint, ami_int3, - ami_int4, ami_int5, ami_badint, ami_int7 -}; -#endif diff --git a/arch/ppc/amiga/amisound.c b/arch/ppc/amiga/amisound.c deleted file mode 100644 index 2b86cbef79f..00000000000 --- a/arch/ppc/amiga/amisound.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../m68k/amiga/amisound.c" diff --git a/arch/ppc/amiga/bootinfo.c b/arch/ppc/amiga/bootinfo.c deleted file mode 100644 index efd869a3ed9..00000000000 --- a/arch/ppc/amiga/bootinfo.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Extracted from arch/m68k/kernel/setup.c. - * Should be properly generalized and put somewhere else. - * Jesper - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/setup.h> -#include <asm/bootinfo.h> - -extern char cmd_line[CL_SIZE]; - -extern int num_memory; -extern int m68k_realnum_memory; -extern struct mem_info memory[NUM_MEMINFO]; -extern struct mem_info m68k_memory[NUM_MEMINFO]; -extern struct mem_info ramdisk; - -extern int amiga_parse_bootinfo(const struct bi_record *); -extern int atari_parse_bootinfo(const struct bi_record *); -extern int mac_parse_bootinfo(const struct bi_record *); - -void __init parse_bootinfo(const struct bi_record *record) -{ - while (record->tag != BI_LAST) { - int unknown = 0; - const u_long *data = record->data; - switch (record->tag) { - case BI_MACHTYPE: - case BI_CPUTYPE: - case BI_FPUTYPE: - case BI_MMUTYPE: - /* Already set up by head.S */ - break; - - case BI_MEMCHUNK: - if (num_memory < NUM_MEMINFO) { - memory[num_memory].addr = data[0]; - memory[num_memory].size = data[1]; - num_memory++; - - /* FIXME: duplicate for m68k drivers. */ - m68k_memory[m68k_realnum_memory].addr = data[0]; - m68k_memory[m68k_realnum_memory].size = data[1]; - m68k_realnum_memory++; - } else - printk("parse_bootinfo: too many memory chunks\n"); - break; - - case BI_RAMDISK: - ramdisk.addr = data[0]; - ramdisk.size = data[1]; - break; - - case BI_COMMAND_LINE: - strlcpy(cmd_line, (const char *)data, sizeof(cmd_line)); - break; - - default: - if (MACH_IS_AMIGA) - unknown = amiga_parse_bootinfo(record); - else if (MACH_IS_ATARI) - unknown = atari_parse_bootinfo(record); - else if (MACH_IS_MAC) - unknown = mac_parse_bootinfo(record); - else - unknown = 1; - } - if (unknown) - printk("parse_bootinfo: unknown tag 0x%04x ignored\n", - record->tag); - record = (struct bi_record *)((u_long)record+record->size); - } -} diff --git a/arch/ppc/amiga/chipram.c b/arch/ppc/amiga/chipram.c deleted file mode 100644 index e6ab3c6b223..00000000000 --- a/arch/ppc/amiga/chipram.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../m68k/amiga/chipram.c" diff --git a/arch/ppc/amiga/cia.c b/arch/ppc/amiga/cia.c deleted file mode 100644 index 9558f2f40e6..00000000000 --- a/arch/ppc/amiga/cia.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (C) 1996 Roman Zippel - * - * The concept of some functions bases on the original Amiga OS function - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/init.h> - -#include <asm/irq.h> -#include <asm/amigahw.h> -#include <asm/amigaints.h> - -struct ciabase { - volatile struct CIA *cia; - u_char icr_mask, icr_data; - u_short int_mask; - int handler_irq, cia_irq, server_irq; - char *name; -} ciaa_base = { - &ciaa, 0, 0, IF_PORTS, - IRQ_AMIGA_AUTO_2, IRQ_AMIGA_CIAA, - IRQ_AMIGA_PORTS, - "CIAA handler" -}, ciab_base = { - &ciab, 0, 0, IF_EXTER, - IRQ_AMIGA_AUTO_6, IRQ_AMIGA_CIAB, - IRQ_AMIGA_EXTER, - "CIAB handler" -}; - -#define CIA_SET_BASE_ADJUST_IRQ(base, irq) \ -do { \ - if (irq >= IRQ_AMIGA_CIAB) { \ - base = &ciab_base; \ - irq -= IRQ_AMIGA_CIAB; \ - } else { \ - base = &ciaa_base; \ - irq -= IRQ_AMIGA_CIAA; \ - } \ -} while (0) - -/* - * Cause or clear CIA interrupts, return old interrupt status. - */ - -static unsigned char cia_set_irq_private(struct ciabase *base, - unsigned char mask) -{ - u_char old; - - old = (base->icr_data |= base->cia->icr); - if (mask & CIA_ICR_SETCLR) - base->icr_data |= mask; - else - base->icr_data &= ~mask; - if (base->icr_data & base->icr_mask) - amiga_custom.intreq = IF_SETCLR | base->int_mask; - return old & base->icr_mask; -} - -unsigned char cia_set_irq(unsigned int irq, int set) -{ - struct ciabase *base; - unsigned char mask; - - if (irq >= IRQ_AMIGA_CIAB) - mask = (1 << (irq - IRQ_AMIGA_CIAB)); - else - mask = (1 << (irq - IRQ_AMIGA_CIAA)); - mask |= (set) ? CIA_ICR_SETCLR : 0; - - CIA_SET_BASE_ADJUST_IRQ(base, irq); - - return cia_set_irq_private(base, mask); -} - -unsigned char cia_get_irq_mask(unsigned int irq) -{ - struct ciabase *base; - - CIA_SET_BASE_ADJUST_IRQ(base, irq); - - return base->cia->icr; -} - -/* - * Enable or disable CIA interrupts, return old interrupt mask. - */ - -static unsigned char cia_able_irq_private(struct ciabase *base, - unsigned char mask) -{ - u_char old; - - old = base->icr_mask; - base->icr_data |= base->cia->icr; - base->cia->icr = mask; - if (mask & CIA_ICR_SETCLR) - base->icr_mask |= mask; - else - base->icr_mask &= ~mask; - base->icr_mask &= CIA_ICR_ALL; - - if (base->icr_data & base->icr_mask) - amiga_custom.intreq = IF_SETCLR | base->int_mask; - return old; -} - -unsigned char cia_able_irq(unsigned int irq, int enable) -{ - struct ciabase *base; - unsigned char mask; - - if (irq >= IRQ_AMIGA_CIAB) - mask = (1 << (irq - IRQ_AMIGA_CIAB)); - else - mask = (1 << (irq - IRQ_AMIGA_CIAA)); - mask |= (enable) ? CIA_ICR_SETCLR : 0; - - CIA_SET_BASE_ADJUST_IRQ(base, irq); - - return cia_able_irq_private(base, mask); -} - -static void cia_handler(int irq, void *dev_id, struct pt_regs *fp) -{ - struct ciabase *base = (struct ciabase *)dev_id; - irq_desc_t *desc; - struct irqaction *action; - int i; - unsigned char ints; - - irq = base->cia_irq; - desc = irq_desc + irq; - ints = cia_set_irq_private(base, CIA_ICR_ALL); - amiga_custom.intreq = base->int_mask; - for (i = 0; i < CIA_IRQS; i++, irq++) { - if (ints & 1) { - kstat_cpu(0).irqs[irq]++; - action = desc->action; - action->handler(irq, action->dev_id, fp); - } - ints >>= 1; - desc++; - } - amiga_do_irq_list(base->server_irq, fp); -} - -void __init cia_init_IRQ(struct ciabase *base) -{ - extern struct irqaction amiga_sys_irqaction[AUTO_IRQS]; - struct irqaction *action; - - /* clear any pending interrupt and turn off all interrupts */ - cia_set_irq_private(base, CIA_ICR_ALL); - cia_able_irq_private(base, CIA_ICR_ALL); - - /* install CIA handler */ - action = &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]; - action->handler = cia_handler; - action->dev_id = base; - action->name = base->name; - setup_irq(base->handler_irq, &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]); - - amiga_custom.intena = IF_SETCLR | base->int_mask; -} diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c deleted file mode 100644 index bc50ed11957..00000000000 --- a/arch/ppc/amiga/config.c +++ /dev/null @@ -1,953 +0,0 @@ -#define m68k_debug_device debug_device - -/* - * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * Miscellaneous Amiga stuff - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/kd.h> -#include <linux/tty.h> -#include <linux/console.h> -#include <linux/init.h> -#ifdef CONFIG_ZORRO -#include <linux/zorro.h> -#endif - -#include <asm/bootinfo.h> -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/amigahw.h> -#include <asm/amigaints.h> -#include <asm/irq.h> -#include <asm/machdep.h> -#include <asm/io.h> - -unsigned long powerup_PCI_present; -unsigned long powerup_BPPCPLUS_present; -unsigned long amiga_model; -unsigned long amiga_eclock; -unsigned long amiga_masterclock; -unsigned long amiga_colorclock; -unsigned long amiga_chipset; -unsigned char amiga_vblank; -unsigned char amiga_psfreq; -struct amiga_hw_present amiga_hw_present; - -static char s_a500[] __initdata = "A500"; -static char s_a500p[] __initdata = "A500+"; -static char s_a600[] __initdata = "A600"; -static char s_a1000[] __initdata = "A1000"; -static char s_a1200[] __initdata = "A1200"; -static char s_a2000[] __initdata = "A2000"; -static char s_a2500[] __initdata = "A2500"; -static char s_a3000[] __initdata = "A3000"; -static char s_a3000t[] __initdata = "A3000T"; -static char s_a3000p[] __initdata = "A3000+"; -static char s_a4000[] __initdata = "A4000"; -static char s_a4000t[] __initdata = "A4000T"; -static char s_cdtv[] __initdata = "CDTV"; -static char s_cd32[] __initdata = "CD32"; -static char s_draco[] __initdata = "Draco"; -static char *amiga_models[] __initdata = { - s_a500, s_a500p, s_a600, s_a1000, s_a1200, s_a2000, s_a2500, s_a3000, - s_a3000t, s_a3000p, s_a4000, s_a4000t, s_cdtv, s_cd32, s_draco, -}; - -static char amiga_model_name[13] = "Amiga "; - -extern char m68k_debug_device[]; - -static void amiga_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); -/* amiga specific irq functions */ -extern void amiga_init_IRQ (void); -extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *); -extern int amiga_request_irq (unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -extern void amiga_free_irq (unsigned int irq, void *dev_id); -extern void amiga_enable_irq (unsigned int); -extern void amiga_disable_irq (unsigned int); -static void amiga_get_model(char *model); -static int amiga_get_hardware_list(char *buffer); -/* amiga specific timer functions */ -static unsigned long amiga_gettimeoffset (void); -static void a3000_gettod (int *, int *, int *, int *, int *, int *); -static void a2000_gettod (int *, int *, int *, int *, int *, int *); -static int amiga_hwclk (int, struct hwclk_time *); -static int amiga_set_clock_mmss (unsigned long); -static void amiga_reset (void); -extern void amiga_init_sound(void); -static void amiga_savekmsg_init(void); -static void amiga_mem_console_write(struct console *co, const char *b, - unsigned int count); -void amiga_serial_console_write(struct console *co, const char *s, - unsigned int count); -static void amiga_debug_init(void); -#ifdef CONFIG_HEARTBEAT -static void amiga_heartbeat(int on); -#endif - -static struct console amiga_console_driver = { - .name = "debug", - .flags = CON_PRINTBUFFER, - .index = -1, -}; - - - /* - * Motherboard Resources present in all Amiga models - */ - -static struct { - struct resource _ciab, _ciaa, _custom, _kickstart; -} mb_resources = { -// { "Ranger Memory", 0x00c00000, 0x00c7ffff }, - ._ciab = { "CIA B", 0x00bfd000, 0x00bfdfff }, - ._ciaa = { "CIA A", 0x00bfe000, 0x00bfefff }, - ._custom = { "Custom I/O", 0x00dff000, 0x00dfffff }, - ._kickstart = { "Kickstart ROM", 0x00f80000, 0x00ffffff } -}; - -static struct resource rtc_resource = { - NULL, 0x00dc0000, 0x00dcffff -}; - -static struct resource ram_resource[NUM_MEMINFO]; - - - /* - * Parse an Amiga-specific record in the bootinfo - */ - -int amiga_parse_bootinfo(const struct bi_record *record) -{ - int unknown = 0; - const unsigned long *data = record->data; - - switch (record->tag) { - case BI_AMIGA_MODEL: - { - unsigned long d = *data; - - powerup_PCI_present = d & 0x100; - amiga_model = d & 0xff; - } - break; - - case BI_AMIGA_ECLOCK: - amiga_eclock = *data; - break; - - case BI_AMIGA_CHIPSET: - amiga_chipset = *data; - break; - - case BI_AMIGA_CHIP_SIZE: - amiga_chip_size = *(const int *)data; - break; - - case BI_AMIGA_VBLANK: - amiga_vblank = *(const unsigned char *)data; - break; - - case BI_AMIGA_PSFREQ: - amiga_psfreq = *(const unsigned char *)data; - break; - - case BI_AMIGA_AUTOCON: -#ifdef CONFIG_ZORRO - if (zorro_num_autocon < ZORRO_NUM_AUTO) { - const struct ConfigDev *cd = (struct ConfigDev *)data; - struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++]; - dev->rom = cd->cd_Rom; - dev->slotaddr = cd->cd_SlotAddr; - dev->slotsize = cd->cd_SlotSize; - dev->resource.start = (unsigned long)cd->cd_BoardAddr; - dev->resource.end = dev->resource.start+cd->cd_BoardSize-1; - } else - printk("amiga_parse_bootinfo: too many AutoConfig devices\n"); -#endif /* CONFIG_ZORRO */ - break; - - case BI_AMIGA_SERPER: - /* serial port period: ignored here */ - break; - - case BI_AMIGA_PUP_BRIDGE: - powerup_PCI_present = *(const unsigned short *)data; - break; - - case BI_AMIGA_BPPC_SCSI: - powerup_BPPCPLUS_present = *(const unsigned short *)data; - break; - - default: - unknown = 1; - } - return(unknown); -} - - /* - * Identify builtin hardware - */ - -static void __init amiga_identify(void) -{ - /* Fill in some default values, if necessary */ - if (amiga_eclock == 0) - amiga_eclock = 709379; - - memset(&amiga_hw_present, 0, sizeof(amiga_hw_present)); - - printk("Amiga hardware found: "); - if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) { - printk("[%s] ", amiga_models[amiga_model-AMI_500]); - strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]); - } - - switch(amiga_model) { - case AMI_UNKNOWN: - goto Generic; - - case AMI_600: - case AMI_1200: - AMIGAHW_SET(A1200_IDE); - AMIGAHW_SET(PCMCIA); - case AMI_500: - case AMI_500PLUS: - case AMI_1000: - case AMI_2000: - case AMI_2500: - AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */ - goto Generic; - - case AMI_3000: - case AMI_3000T: - AMIGAHW_SET(AMBER_FF); - AMIGAHW_SET(MAGIC_REKICK); - /* fall through */ - case AMI_3000PLUS: - AMIGAHW_SET(A3000_SCSI); - AMIGAHW_SET(A3000_CLK); - AMIGAHW_SET(ZORRO3); - goto Generic; - - case AMI_4000T: - AMIGAHW_SET(A4000_SCSI); - /* fall through */ - case AMI_4000: - AMIGAHW_SET(A4000_IDE); - AMIGAHW_SET(A3000_CLK); - AMIGAHW_SET(ZORRO3); - goto Generic; - - case AMI_CDTV: - case AMI_CD32: - AMIGAHW_SET(CD_ROM); - AMIGAHW_SET(A2000_CLK); /* Is this correct? */ - goto Generic; - - Generic: - AMIGAHW_SET(AMI_VIDEO); - AMIGAHW_SET(AMI_BLITTER); - AMIGAHW_SET(AMI_AUDIO); - AMIGAHW_SET(AMI_FLOPPY); - AMIGAHW_SET(AMI_KEYBOARD); - AMIGAHW_SET(AMI_MOUSE); - AMIGAHW_SET(AMI_SERIAL); - AMIGAHW_SET(AMI_PARALLEL); - AMIGAHW_SET(CHIP_RAM); - AMIGAHW_SET(PAULA); - - switch(amiga_chipset) { - case CS_OCS: - case CS_ECS: - case CS_AGA: - switch (amiga_custom.deniseid & 0xf) { - case 0x0c: - AMIGAHW_SET(DENISE_HR); - break; - case 0x08: - AMIGAHW_SET(LISA); - break; - } - break; - default: - AMIGAHW_SET(DENISE); - break; - } - switch ((amiga_custom.vposr>>8) & 0x7f) { - case 0x00: - AMIGAHW_SET(AGNUS_PAL); - break; - case 0x10: - AMIGAHW_SET(AGNUS_NTSC); - break; - case 0x20: - case 0x21: - AMIGAHW_SET(AGNUS_HR_PAL); - break; - case 0x30: - case 0x31: - AMIGAHW_SET(AGNUS_HR_NTSC); - break; - case 0x22: - case 0x23: - AMIGAHW_SET(ALICE_PAL); - break; - case 0x32: - case 0x33: - AMIGAHW_SET(ALICE_NTSC); - break; - } - AMIGAHW_SET(ZORRO); - break; - - case AMI_DRACO: - panic("No support for Draco yet"); - - default: - panic("Unknown Amiga Model"); - } - -#define AMIGAHW_ANNOUNCE(name, str) \ - if (AMIGAHW_PRESENT(name)) \ - printk(str) - - AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO "); - AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER "); - AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF "); - AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO "); - AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY "); - AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI "); - AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI "); - AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE "); - AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE "); - AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM "); - AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD "); - AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE "); - AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL "); - AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL "); - AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK "); - AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK "); - AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM "); - AMIGAHW_ANNOUNCE(PAULA, "PAULA "); - AMIGAHW_ANNOUNCE(DENISE, "DENISE "); - AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR "); - AMIGAHW_ANNOUNCE(LISA, "LISA "); - AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL "); - AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC "); - AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL "); - AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC "); - AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL "); - AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC "); - AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK "); - AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA "); - if (AMIGAHW_PRESENT(ZORRO)) - printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : ""); - printk("\n"); - -#undef AMIGAHW_ANNOUNCE -} - - /* - * Setup the Amiga configuration info - */ - -void __init config_amiga(void) -{ - int i; - - amiga_debug_init(); - amiga_identify(); - - /* Some APUS boxes may have PCI memory, but ... */ - iomem_resource.name = "Memory"; - for (i = 0; i < 4; i++) - request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]); - - mach_sched_init = amiga_sched_init; - mach_init_IRQ = amiga_init_IRQ; -#ifndef CONFIG_APUS - mach_default_handler = &amiga_default_handler; - mach_request_irq = amiga_request_irq; - mach_free_irq = amiga_free_irq; - enable_irq = amiga_enable_irq; - disable_irq = amiga_disable_irq; -#endif - mach_get_model = amiga_get_model; - mach_get_hardware_list = amiga_get_hardware_list; - mach_gettimeoffset = amiga_gettimeoffset; - if (AMIGAHW_PRESENT(A3000_CLK)){ - mach_gettod = a3000_gettod; - rtc_resource.name = "A3000 RTC"; - request_resource(&iomem_resource, &rtc_resource); - } - else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */ - mach_gettod = a2000_gettod; - rtc_resource.name = "A2000 RTC"; - request_resource(&iomem_resource, &rtc_resource); - } - - mach_max_dma_address = 0xffffffff; /* - * default MAX_DMA=0xffffffff - * on all machines. If we don't - * do so, the SCSI code will not - * be able to allocate any mem - * for transfers, unless we are - * dealing with a Z2 mem only - * system. /Jes - */ - - mach_hwclk = amiga_hwclk; - mach_set_clock_mmss = amiga_set_clock_mmss; - mach_reset = amiga_reset; -#ifdef CONFIG_HEARTBEAT - mach_heartbeat = amiga_heartbeat; -#endif - - /* Fill in the clock values (based on the 700 kHz E-Clock) */ - amiga_masterclock = 40*amiga_eclock; /* 28 MHz */ - amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */ - - /* clear all DMA bits */ - amiga_custom.dmacon = DMAF_ALL; - /* ensure that the DMA master bit is set */ - amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER; - - /* request all RAM */ - for (i = 0; i < m68k_num_memory; i++) { - ram_resource[i].name = - (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" : - (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" : - "16-bit Slow RAM"; - ram_resource[i].start = m68k_memory[i].addr; - ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1; - request_resource(&iomem_resource, &ram_resource[i]); - } - - /* initialize chipram allocator */ - amiga_chip_init (); - - /* debugging using chipram */ - if (!strcmp( m68k_debug_device, "mem" )){ - if (!AMIGAHW_PRESENT(CHIP_RAM)) - printk("Warning: no chipram present for debugging\n"); - else { - amiga_savekmsg_init(); - amiga_console_driver.write = amiga_mem_console_write; - register_console(&amiga_console_driver); - } - } - - /* our beloved beeper */ - if (AMIGAHW_PRESENT(AMI_AUDIO)) - amiga_init_sound(); - - /* - * if it is an A3000, set the magic bit that forces - * a hard rekick - */ - if (AMIGAHW_PRESENT(MAGIC_REKICK)) - *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80; -} - -static unsigned short jiffy_ticks; - -static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *, - struct pt_regs *)) -{ - static struct resource sched_res = { - "timer", 0x00bfd400, 0x00bfd5ff, - }; - jiffy_ticks = (amiga_eclock+HZ/2)/HZ; - - if (request_resource(&mb_resources._ciab, &sched_res)) - printk("Cannot allocate ciab.ta{lo,hi}\n"); - ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */ - ciab.talo = jiffy_ticks % 256; - ciab.tahi = jiffy_ticks / 256; - - /* install interrupt service routine for CIAB Timer A - * - * Please don't change this to use ciaa, as it interferes with the - * SCSI code. We'll have to take a look at this later - */ - request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL); - /* start timer */ - ciab.cra |= 0x11; -} - -#define TICK_SIZE 10000 - -extern unsigned char cia_get_irq_mask(unsigned int irq); - -/* This is always executed with interrupts disabled. */ -static unsigned long amiga_gettimeoffset (void) -{ - unsigned short hi, lo, hi2; - unsigned long ticks, offset = 0; - - /* read CIA B timer A current value */ - hi = ciab.tahi; - lo = ciab.talo; - hi2 = ciab.tahi; - - if (hi != hi2) { - lo = ciab.talo; - hi = hi2; - } - - ticks = hi << 8 | lo; - - if (ticks > jiffy_ticks / 2) - /* check for pending interrupt */ - if (cia_get_irq_mask(IRQ_AMIGA_CIAB) & CIA_ICR_TA) - offset = 10000; - - ticks = jiffy_ticks - ticks; - ticks = (10000 * ticks) / jiffy_ticks; - - return ticks + offset; -} - -static void a3000_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ - volatile struct tod3000 *tod = TOD_3000; - - tod->cntrl1 = TOD3000_CNTRL1_HOLD; - - *secp = tod->second1 * 10 + tod->second2; - *minp = tod->minute1 * 10 + tod->minute2; - *hourp = tod->hour1 * 10 + tod->hour2; - *dayp = tod->day1 * 10 + tod->day2; - *monp = tod->month1 * 10 + tod->month2; - *yearp = tod->year1 * 10 + tod->year2; - - tod->cntrl1 = TOD3000_CNTRL1_FREE; -} - -static void a2000_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ - volatile struct tod2000 *tod = TOD_2000; - - tod->cntrl1 = TOD2000_CNTRL1_HOLD; - - while (tod->cntrl1 & TOD2000_CNTRL1_BUSY) - ; - - *secp = tod->second1 * 10 + tod->second2; - *minp = tod->minute1 * 10 + tod->minute2; - *hourp = (tod->hour1 & 3) * 10 + tod->hour2; - *dayp = tod->day1 * 10 + tod->day2; - *monp = tod->month1 * 10 + tod->month2; - *yearp = tod->year1 * 10 + tod->year2; - - if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){ - if (!(tod->hour1 & TOD2000_HOUR1_PM) && *hourp == 12) - *hourp = 0; - else if ((tod->hour1 & TOD2000_HOUR1_PM) && *hourp != 12) - *hourp += 12; - } - - tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD; -} - -static int amiga_hwclk(int op, struct hwclk_time *t) -{ - if (AMIGAHW_PRESENT(A3000_CLK)) { - volatile struct tod3000 *tod = TOD_3000; - - tod->cntrl1 = TOD3000_CNTRL1_HOLD; - - if (!op) { /* read */ - t->sec = tod->second1 * 10 + tod->second2; - t->min = tod->minute1 * 10 + tod->minute2; - t->hour = tod->hour1 * 10 + tod->hour2; - t->day = tod->day1 * 10 + tod->day2; - t->wday = tod->weekday; - t->mon = tod->month1 * 10 + tod->month2 - 1; - t->year = tod->year1 * 10 + tod->year2; - if (t->year <= 69) - t->year += 100; - } else { - tod->second1 = t->sec / 10; - tod->second2 = t->sec % 10; - tod->minute1 = t->min / 10; - tod->minute2 = t->min % 10; - tod->hour1 = t->hour / 10; - tod->hour2 = t->hour % 10; - tod->day1 = t->day / 10; - tod->day2 = t->day % 10; - if (t->wday != -1) - tod->weekday = t->wday; - tod->month1 = (t->mon + 1) / 10; - tod->month2 = (t->mon + 1) % 10; - if (t->year >= 100) - t->year -= 100; - tod->year1 = t->year / 10; - tod->year2 = t->year % 10; - } - - tod->cntrl1 = TOD3000_CNTRL1_FREE; - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - volatile struct tod2000 *tod = TOD_2000; - - tod->cntrl1 = TOD2000_CNTRL1_HOLD; - - while (tod->cntrl1 & TOD2000_CNTRL1_BUSY) - ; - - if (!op) { /* read */ - t->sec = tod->second1 * 10 + tod->second2; - t->min = tod->minute1 * 10 + tod->minute2; - t->hour = (tod->hour1 & 3) * 10 + tod->hour2; - t->day = tod->day1 * 10 + tod->day2; - t->wday = tod->weekday; - t->mon = tod->month1 * 10 + tod->month2 - 1; - t->year = tod->year1 * 10 + tod->year2; - if (t->year <= 69) - t->year += 100; - - if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){ - if (!(tod->hour1 & TOD2000_HOUR1_PM) && t->hour == 12) - t->hour = 0; - else if ((tod->hour1 & TOD2000_HOUR1_PM) && t->hour != 12) - t->hour += 12; - } - } else { - tod->second1 = t->sec / 10; - tod->second2 = t->sec % 10; - tod->minute1 = t->min / 10; - tod->minute2 = t->min % 10; - if (tod->cntrl3 & TOD2000_CNTRL3_24HMODE) - tod->hour1 = t->hour / 10; - else if (t->hour >= 12) - tod->hour1 = TOD2000_HOUR1_PM + - (t->hour - 12) / 10; - else - tod->hour1 = t->hour / 10; - tod->hour2 = t->hour % 10; - tod->day1 = t->day / 10; - tod->day2 = t->day % 10; - if (t->wday != -1) - tod->weekday = t->wday; - tod->month1 = (t->mon + 1) / 10; - tod->month2 = (t->mon + 1) % 10; - if (t->year >= 100) - t->year -= 100; - tod->year1 = t->year / 10; - tod->year2 = t->year % 10; - } - - tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD; - } - - return 0; -} - -static int amiga_set_clock_mmss (unsigned long nowtime) -{ - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - if (AMIGAHW_PRESENT(A3000_CLK)) { - volatile struct tod3000 *tod = TOD_3000; - - tod->cntrl1 = TOD3000_CNTRL1_HOLD; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; - - tod->cntrl1 = TOD3000_CNTRL1_FREE; - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - volatile struct tod2000 *tod = TOD_2000; - - tod->cntrl1 = TOD2000_CNTRL1_HOLD; - - while (tod->cntrl1 & TOD2000_CNTRL1_BUSY) - ; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; - - tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD; - } - - return 0; -} - -static NORET_TYPE void amiga_reset( void ) - ATTRIB_NORET; - -static void amiga_reset (void) -{ - for (;;); -} - - - /* - * Debugging - */ - -#define SAVEKMSG_MAXMEM 128*1024 - -#define SAVEKMSG_MAGIC1 0x53415645 /* 'SAVE' */ -#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */ - -struct savekmsg { - unsigned long magic1; /* SAVEKMSG_MAGIC1 */ - unsigned long magic2; /* SAVEKMSG_MAGIC2 */ - unsigned long magicptr; /* address of magic1 */ - unsigned long size; - char data[0]; -}; - -static struct savekmsg *savekmsg = NULL; - -static void amiga_mem_console_write(struct console *co, const char *s, - unsigned int count) -{ - if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) { - memcpy(savekmsg->data+savekmsg->size, s, count); - savekmsg->size += count; - } -} - -static void amiga_savekmsg_init(void) -{ - static struct resource debug_res = { "Debug" }; - - savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res); - savekmsg->magic1 = SAVEKMSG_MAGIC1; - savekmsg->magic2 = SAVEKMSG_MAGIC2; - savekmsg->magicptr = virt_to_phys(savekmsg); - savekmsg->size = 0; -} - -static void amiga_serial_putc(char c) -{ - amiga_custom.serdat = (unsigned char)c | 0x100; - mb(); - while (!(amiga_custom.serdatr & 0x2000)) - ; -} - -void amiga_serial_console_write(struct console *co, const char *s, - unsigned int count) -{ -#if 0 /* def CONFIG_KGDB */ - /* FIXME:APUS GDB doesn't seem to like O-packages before it is - properly connected with the target. */ - __gdb_output_string (s, count); -#else - while (count--) { - if (*s == '\n') - amiga_serial_putc('\r'); - amiga_serial_putc(*s++); - } -#endif -} - -#ifdef CONFIG_SERIAL_CONSOLE -void amiga_serial_puts(const char *s) -{ - amiga_serial_console_write(NULL, s, strlen(s)); -} - -int amiga_serial_console_wait_key(struct console *co) -{ - int ch; - - while (!(amiga_custom.intreqr & IF_RBF)) - barrier(); - ch = amiga_custom.serdatr & 0xff; - /* clear the interrupt, so that another character can be read */ - amiga_custom.intreq = IF_RBF; - return ch; -} - -void amiga_serial_gets(struct console *co, char *s, int len) -{ - int ch, cnt = 0; - - while (1) { - ch = amiga_serial_console_wait_key(co); - - /* Check for backspace. */ - if (ch == 8 || ch == 127) { - if (cnt == 0) { - amiga_serial_putc('\007'); - continue; - } - cnt--; - amiga_serial_puts("\010 \010"); - continue; - } - - /* Check for enter. */ - if (ch == 10 || ch == 13) - break; - - /* See if line is too long. */ - if (cnt >= len + 1) { - amiga_serial_putc(7); - cnt--; - continue; - } - - /* Store and echo character. */ - s[cnt++] = ch; - amiga_serial_putc(ch); - } - /* Print enter. */ - amiga_serial_puts("\r\n"); - s[cnt] = 0; -} -#endif - -static void __init amiga_debug_init(void) -{ - if (!strcmp( m68k_debug_device, "ser" )) { - /* no initialization required (?) */ - amiga_console_driver.write = amiga_serial_console_write; - register_console(&amiga_console_driver); - } -} - -#ifdef CONFIG_HEARTBEAT -static void amiga_heartbeat(int on) -{ - if (on) - ciaa.pra &= ~2; - else - ciaa.pra |= 2; -} -#endif - - /* - * Amiga specific parts of /proc - */ - -static void amiga_get_model(char *model) -{ - strcpy(model, amiga_model_name); -} - - -static int amiga_get_hardware_list(char *buffer) -{ - int len = 0; - - if (AMIGAHW_PRESENT(CHIP_RAM)) - len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10); - len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n", - amiga_psfreq, amiga_eclock); - if (AMIGAHW_PRESENT(AMI_VIDEO)) { - char *type; - switch(amiga_chipset) { - case CS_OCS: - type = "OCS"; - break; - case CS_ECS: - type = "ECS"; - break; - case CS_AGA: - type = "AGA"; - break; - default: - type = "Old or Unknown"; - break; - } - len += sprintf(buffer+len, "Graphics:\t%s\n", type); - } - -#define AMIGAHW_ANNOUNCE(name, str) \ - if (AMIGAHW_PRESENT(name)) \ - len += sprintf (buffer+len, "\t%s\n", str) - - len += sprintf (buffer + len, "Detected hardware:\n"); - - AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video"); - AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter"); - AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer"); - AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio"); - AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller"); - AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)"); - AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)"); - AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)"); - AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)"); - AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive"); - AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard"); - AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port"); - AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port"); - AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port"); - AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)"); - AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)"); - AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM"); - AMIGAHW_ANNOUNCE(PAULA, "Paula 8364"); - AMIGAHW_ANNOUNCE(DENISE, "Denise 8362"); - AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373"); - AMIGAHW_ANNOUNCE(LISA, "Lisa 8375"); - AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371"); - AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370"); - AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372"); - AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372"); - AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374"); - AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374"); - AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick"); - AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot"); - if (AMIGAHW_PRESENT(ZORRO)) - len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion " - "Device%s\n", - AMIGAHW_PRESENT(ZORRO3) ? "I" : "", - zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s"); - -#undef AMIGAHW_ANNOUNCE - - return(len); -} - -#ifdef CONFIG_APUS -int get_hardware_list(char *buffer) -{ - extern int get_cpuinfo(char *buffer); - int len = 0; - char model[80]; - u_long mem; - int i; - - if (mach_get_model) - mach_get_model(model); - else - strcpy(model, "Unknown PowerPC"); - - len += sprintf(buffer+len, "Model:\t\t%s\n", model); - len += get_cpuinfo(buffer+len); - for (mem = 0, i = 0; i < m68k_realnum_memory; i++) - mem += m68k_memory[i].size; - len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10); - - if (mach_get_hardware_list) - len += mach_get_hardware_list(buffer+len); - - return(len); -} -#endif diff --git a/arch/ppc/amiga/ints.c b/arch/ppc/amiga/ints.c deleted file mode 100644 index 083a1746219..00000000000 --- a/arch/ppc/amiga/ints.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Linux/m68k general interrupt handling code from arch/m68k/kernel/ints.c - * Needed to drive the m68k emulating IRQ hardware on the PowerUp boards. - */ - -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/seq_file.h> - -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/traps.h> -#include <asm/page.h> -#include <asm/machdep.h> - -/* table for system interrupt handlers */ -static irq_handler_t irq_list[SYS_IRQS]; - -static const char *default_names[SYS_IRQS] = { - "spurious int", "int1 handler", "int2 handler", "int3 handler", - "int4 handler", "int5 handler", "int6 handler", "int7 handler" -}; - -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - -#define NUM_IRQ_NODES 100 -static irq_node_t nodes[NUM_IRQ_NODES]; - - -/* - * void init_IRQ(void) - * - * Parameters: None - * - * Returns: Nothing - * - * This function should be called during kernel startup to initialize - * the IRQ handling routines. - */ - -__init -void m68k_init_IRQ(void) -{ - int i; - - for (i = 0; i < SYS_IRQS; i++) { - if (mach_default_handler) - irq_list[i].handler = (*mach_default_handler)[i]; - irq_list[i].flags = 0; - irq_list[i].dev_id = NULL; - irq_list[i].devname = default_names[i]; - } - - for (i = 0; i < NUM_IRQ_NODES; i++) - nodes[i].handler = NULL; - - mach_init_IRQ (); -} - -irq_node_t *new_irq_node(void) -{ - irq_node_t *node; - short i; - - for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) - if (!node->handler) - return node; - - printk ("new_irq_node: out of nodes\n"); - return NULL; -} - -int sys_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags, const char *devname, void *dev_id) -{ - if (irq < IRQ1 || irq > IRQ7) { - printk("%s: Incorrect IRQ %d from %s\n", - __FUNCTION__, irq, devname); - return -ENXIO; - } - -#if 0 - if (!(irq_list[irq].flags & IRQ_FLG_STD)) { - if (irq_list[irq].flags & IRQ_FLG_LOCK) { - printk("%s: IRQ %d from %s is not replaceable\n", - __FUNCTION__, irq, irq_list[irq].devname); - return -EBUSY; - } - if (!(flags & IRQ_FLG_REPLACE)) { - printk("%s: %s can't replace IRQ %d from %s\n", - __FUNCTION__, devname, irq, irq_list[irq].devname); - return -EBUSY; - } - } -#endif - - irq_list[irq].handler = handler; - irq_list[irq].flags = flags; - irq_list[irq].dev_id = dev_id; - irq_list[irq].devname = devname; - return 0; -} - -void sys_free_irq(unsigned int irq, void *dev_id) -{ - if (irq < IRQ1 || irq > IRQ7) { - printk("%s: Incorrect IRQ %d\n", __FUNCTION__, irq); - return; - } - - if (irq_list[irq].dev_id != dev_id) - printk("%s: Removing probably wrong IRQ %d from %s\n", - __FUNCTION__, irq, irq_list[irq].devname); - - irq_list[irq].handler = (*mach_default_handler)[irq]; - irq_list[irq].flags = 0; - irq_list[irq].dev_id = NULL; - irq_list[irq].devname = default_names[irq]; -} - -asmlinkage void process_int(unsigned long vec, struct pt_regs *fp) -{ - if (vec >= VEC_INT1 && vec <= VEC_INT7 && !MACH_IS_BVME6000) { - vec -= VEC_SPUR; - kstat_cpu(0).irqs[vec]++; - irq_list[vec].handler(vec, irq_list[vec].dev_id, fp); - } else { - if (mach_process_int) - mach_process_int(vec, fp); - else - panic("Can't process interrupt vector %ld\n", vec); - return; - } -} - -int m68k_get_irq_list(struct seq_file *p, void *v) -{ - int i; - - /* autovector interrupts */ - if (mach_default_handler) { - for (i = 0; i < SYS_IRQS; i++) { - seq_printf(p, "auto %2d: %10u ", i, - i ? kstat_cpu(0).irqs[i] : num_spurious); - seq_puts(p, " "); - seq_printf(p, "%s\n", irq_list[i].devname); - } - } - - mach_get_irq_list(p, v); - return 0; -} diff --git a/arch/ppc/amiga/pcmcia.c b/arch/ppc/amiga/pcmcia.c deleted file mode 100644 index 5d29dc65093..00000000000 --- a/arch/ppc/amiga/pcmcia.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../m68k/amiga/pcmcia.c" diff --git a/arch/ppc/amiga/time.c b/arch/ppc/amiga/time.c deleted file mode 100644 index 8c880c0ca38..00000000000 --- a/arch/ppc/amiga/time.c +++ /dev/null @@ -1,57 +0,0 @@ -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> - -#include <asm/machdep.h> -#include <asm/io.h> - -#include <linux/timex.h> - -unsigned long m68k_get_rtc_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - - extern void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec); - - arch_gettod (&year, &mon, &day, &hour, &min, &sec); - - if ((year += 1900) < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); -} - -int m68k_set_rtc_time(unsigned long nowtime) -{ - if (mach_set_clock_mmss) - return mach_set_clock_mmss (nowtime); - return -1; -} - -void apus_heartbeat (void) -{ -#ifdef CONFIG_HEARTBEAT - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_heartbeat( 1 ); - else if (cnt == 7 || cnt == dist+7) - mach_heartbeat( 0 ); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; - dist = period / 4; - } -#endif - /* should be made smarter */ - ppc_md.heartbeat_count = 1; -} diff --git a/arch/ppc/configs/apus_defconfig b/arch/ppc/configs/apus_defconfig deleted file mode 100644 index e2245252d31..00000000000 --- a/arch/ppc/configs/apus_defconfig +++ /dev/null @@ -1,920 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -CONFIG_SERIAL_CONSOLE=y -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_APUS=y -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_PERMEDIA=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -# CONFIG_PARPORT_PC is not set -CONFIG_PARPORT_AMIGA=m -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set -CONFIG_PPC601_SYNC_FIX=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_AMIGA=y -CONFIG_ZORRO=y -CONFIG_ABSTRACT_CONSOLE=y -CONFIG_APUS_FAST_EXCEPT=y -CONFIG_AMIGA_PCMCIA=y -CONFIG_AMIGA_BUILTIN_SERIAL=y -CONFIG_GVPIOEXT=y -CONFIG_GVPIOEXT_LP=m -CONFIG_GVPIOEXT_PLIP=m -CONFIG_MULTIFACE_III_TTY=y -CONFIG_A2232=y -CONFIG_WHIPPET_SERIAL=y -CONFIG_APNE=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y -CONFIG_ZORRO_NAMES=y - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_AMIGA_FLOPPY=y -CONFIG_AMIGA_Z2RAM=m -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_DM=m - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_IDEDISK_STROKE is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDEFLOPPY=y -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_IDEPCI is not set -CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y -CONFIG_BLK_DEV_BUDDHA=y - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C7xx is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_NCR53C8XX is not set -# CONFIG_SCSI_SYM53C8XX is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_A3000_SCSI=y -CONFIG_A4000T_SCSI=y -CONFIG_A2091_SCSI=y -CONFIG_GVP11_SCSI=y -CONFIG_CYBERSTORM_SCSI=y -CONFIG_CYBERSTORMII_SCSI=y -CONFIG_BLZ2060_SCSI=y -CONFIG_BLZ1230_SCSI=y -CONFIG_FASTLANE_SCSI=y -CONFIG_A4091_SCSI=y -CONFIG_WARPENGINE_SCSI=y -CONFIG_BLZ603EPLUS_SCSI=y -CONFIG_OKTAGON_SCSI=y - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -# CONFIG_IP_NF_MATCH_AH_ESP is not set -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set -CONFIG_ARIADNE=y -# CONFIG_ZORRO8390 is not set -CONFIG_A2065=y -CONFIG_HYDRA=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPPOE=y -CONFIG_SLIP=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_CIRRUS is not set -CONFIG_FB_PM2=y -# CONFIG_FB_PM2_FIFO_DISCONNECT is not set -# CONFIG_FB_PM2_PCI is not set -CONFIG_FB_PM2_CVPPC=y -CONFIG_FB_CYBER2000=y -CONFIG_FB_AMIGA=y -CONFIG_FB_AMIGA_OCS=y -CONFIG_FB_AMIGA_ECS=y -CONFIG_FB_AMIGA_AGA=y -CONFIG_FB_CYBER=y -CONFIG_FB_VIRGE=y -CONFIG_FB_RETINAZ3=y -CONFIG_FB_FM2=y -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -CONFIG_INPUT=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_AMIGA=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_AMIGA=m -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set -CONFIG_INPUT_UINPUT=m - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -CONFIG_BUSMOUSE=y -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -CONFIG_MINIX_FS=y -CONFIG_ROMFS_FS=y -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -CONFIG_AFFS_FS=y -CONFIG_HFS_FS=y -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -CONFIG_CODA_FS=m -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -# CONFIG_NLS_CODEPAGE_1250 is not set -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Sound -# -CONFIG_SOUND=y -CONFIG_DMASOUND_PAULA=m -CONFIG_DMASOUND=m - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_CMPCI is not set -# CONFIG_SOUND_EMU10K1 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_ES1370 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ESSSOLO1 is not set -# CONFIG_SOUND_MAESTRO is not set -# CONFIG_SOUND_MAESTRO3 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_RME96XX is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -CONFIG_SOUND_TRACEINIT=y -CONFIG_SOUND_DMAP=y -# CONFIG_SOUND_AD1816 is not set -# CONFIG_SOUND_SGALAXY is not set -# CONFIG_SOUND_ADLIB is not set -# CONFIG_SOUND_ACI_MIXER is not set -# CONFIG_SOUND_CS4232 is not set -# CONFIG_SOUND_SSCAPE is not set -# CONFIG_SOUND_GUS is not set -CONFIG_SOUND_VMIDI=m -# CONFIG_SOUND_TRIX is not set -# CONFIG_SOUND_MSS is not set -# CONFIG_SOUND_MPU401 is not set -# CONFIG_SOUND_NM256 is not set -# CONFIG_SOUND_MAD16 is not set -# CONFIG_SOUND_PAS is not set -# CONFIG_SOUND_PSS is not set -# CONFIG_SOUND_SB is not set -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -# CONFIG_SOUND_YM3812 is not set -# CONFIG_SOUND_OPL3SA1 is not set -# CONFIG_SOUND_OPL3SA2 is not set -# CONFIG_SOUND_YMFPCI is not set -# CONFIG_SOUND_UART6850 is not set -# CONFIG_SOUND_AEDSP16 is not set - -# -# USB support -# -# CONFIG_USB is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index c7cb9d5f24a..1b0ec7202dd 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -32,10 +32,6 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> -#ifdef CONFIG_APUS -#include <asm/amigappc.h> -#endif - /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ @@ -128,14 +124,6 @@ __start: */ bl early_init -#ifdef CONFIG_APUS -/* On APUS the __va/__pa constants need to be set to the correct - * values before continuing. - */ - mr r4,r30 - bl fix_mem_constants -#endif /* CONFIG_APUS */ - /* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains * the physical address we are running at, returned by early_init() */ @@ -145,7 +133,7 @@ __after_mmu_off: bl flush_tlbs bl initial_bats -#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +#ifdef CONFIG_BOOTX_TEXT bl setup_disp_bat #endif @@ -161,7 +149,6 @@ __after_mmu_off: #endif /* CONFIG_6xx */ -#ifndef CONFIG_APUS /* * We need to run with _start at physical address 0. * If the MMU is already turned on, we copy stuff to KERNELBASE, @@ -172,7 +159,7 @@ __after_mmu_off: addis r4,r3,KERNELBASE@h /* current address of _start */ cmpwi 0,r4,0 /* are we already running at 0? */ bne relocate_kernel -#endif /* CONFIG_APUS */ + /* * we now have the 1st 16M of ram mapped with the bats. * prep needs the mmu to be turned on here, but pmac already has it on. @@ -812,85 +799,6 @@ copy_and_flush: addi r6,r6,4 blr -#ifdef CONFIG_APUS -/* - * On APUS the physical base address of the kernel is not known at compile - * time, which means the __pa/__va constants used are incorrect. In the - * __init section is recorded the virtual addresses of instructions using - * these constants, so all that has to be done is fix these before - * continuing the kernel boot. - * - * r4 = The physical address of the kernel base. - */ -fix_mem_constants: - mr r10,r4 - addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */ - neg r11,r10 /* phys_to_virt constant */ - - lis r12,__vtop_table_begin@h - ori r12,r12,__vtop_table_begin@l - add r12,r12,r10 /* table begin phys address */ - lis r13,__vtop_table_end@h - ori r13,r13,__vtop_table_end@l - add r13,r13,r10 /* table end phys address */ - subi r12,r12,4 - subi r13,r13,4 -1: lwzu r14,4(r12) /* virt address of instruction */ - add r14,r14,r10 /* phys address of instruction */ - lwz r15,0(r14) /* instruction, now insert top */ - rlwimi r15,r10,16,16,31 /* half of vp const in low half */ - stw r15,0(r14) /* of instruction and restore. */ - dcbst r0,r14 /* write it to memory */ - sync - icbi r0,r14 /* flush the icache line */ - cmpw r12,r13 - bne 1b - sync /* additional sync needed on g4 */ - isync - -/* - * Map the memory where the exception handlers will - * be copied to when hash constants have been patched. - */ -#ifdef CONFIG_APUS_FAST_EXCEPT - lis r8,0xfff0 -#else - lis r8,0 -#endif - ori r8,r8,0x2 /* 128KB, supervisor */ - mtspr SPRN_DBAT3U,r8 - mtspr SPRN_DBAT3L,r8 - - lis r12,__ptov_table_begin@h - ori r12,r12,__ptov_table_begin@l - add r12,r12,r10 /* table begin phys address */ - lis r13,__ptov_table_end@h - ori r13,r13,__ptov_table_end@l - add r13,r13,r10 /* table end phys address */ - subi r12,r12,4 - subi r13,r13,4 -1: lwzu r14,4(r12) /* virt address of instruction */ - add r14,r14,r10 /* phys address of instruction */ - lwz r15,0(r14) /* instruction, now insert top */ - rlwimi r15,r11,16,16,31 /* half of pv const in low half*/ - stw r15,0(r14) /* of instruction and restore. */ - dcbst r0,r14 /* write it to memory */ - sync - icbi r0,r14 /* flush the icache line */ - cmpw r12,r13 - bne 1b - - sync /* additional sync needed on g4 */ - isync /* No speculative loading until now */ - blr - -/*********************************************************************** - * Please note that on APUS the exception handlers are located at the - * physical address 0xfff0000. For this reason, the exception handlers - * cannot use relative branches to access the code below. - ***********************************************************************/ -#endif /* CONFIG_APUS */ - #ifdef CONFIG_SMP .globl __secondary_start_pmac_0 __secondary_start_pmac_0: @@ -1043,19 +951,6 @@ start_here: bl machine_init bl MMU_init -#ifdef CONFIG_APUS - /* Copy exception code to exception vector base on APUS. */ - lis r4,KERNELBASE@h -#ifdef CONFIG_APUS_FAST_EXCEPT - lis r3,0xfff0 /* Copy to 0xfff00000 */ -#else - lis r3,0 /* Copy to 0x00000000 */ -#endif - li r5,0x4000 /* # bytes of memory to copy */ - li r6,0 - bl copy_and_flush /* copy the first 0x4000 bytes */ -#endif /* CONFIG_APUS */ - /* * Go back to running unmapped so we can load up new values * for SDR1 (hash table pointer) and the segment registers @@ -1232,11 +1127,7 @@ initial_bats: #else ori r8,r8,2 /* R/W access */ #endif /* CONFIG_SMP */ -#ifdef CONFIG_APUS - ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */ -#else ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ -#endif /* CONFIG_APUS */ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ @@ -1245,7 +1136,7 @@ initial_bats: isync blr -#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +#ifdef CONFIG_BOOTX_TEXT setup_disp_bat: /* * setup the display bat prepared for us in prom.c @@ -1268,7 +1159,7 @@ setup_disp_bat: mtspr SPRN_IBAT3U,r11 blr -#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ +#endif /* defined(CONFIG_BOOTX_TEXT) */ #ifdef CONFIG_8260 /* Jump into the system reset for the rom. diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 63f0a987139..22494ec123e 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -60,8 +60,6 @@ long long __ashrdi3(long long, int); long long __ashldi3(long long, int); long long __lshrdi3(long long, int); -extern unsigned long mm_ptov (unsigned long paddr); - EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(clear_user_page); EXPORT_SYMBOL(transfer_to_handler); @@ -118,7 +116,6 @@ EXPORT_SYMBOL(_outsw_ns); EXPORT_SYMBOL(_insl_ns); EXPORT_SYMBOL(_outsl_ns); EXPORT_SYMBOL(iopa); -EXPORT_SYMBOL(mm_ptov); EXPORT_SYMBOL(ioremap); #ifdef CONFIG_44x EXPORT_SYMBOL(ioremap64); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 967c1ef59a6..aac88c2f3db 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -25,7 +25,6 @@ #include <asm/pgtable.h> #include <asm/bootinfo.h> #include <asm/setup.h> -#include <asm/amigappc.h> #include <asm/smp.h> #include <asm/elf.h> #include <asm/cputable.h> diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 35ebb6395ae..1f51e6c9450 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -426,41 +426,3 @@ unsigned long iopa(unsigned long addr) return(pa); } -/* This is will find the virtual address for a physical one.... - * Swiped from APUS, could be dangerous :-). - * This is only a placeholder until I really find a way to make this - * work. -- Dan - */ -unsigned long -mm_ptov (unsigned long paddr) -{ - unsigned long ret; -#if 0 - if (paddr < 16*1024*1024) - ret = ZTWO_VADDR(paddr); - else { - int i; - - for (i = 0; i < kmap_chunk_count;){ - unsigned long phys = kmap_chunks[i++]; - unsigned long size = kmap_chunks[i++]; - unsigned long virt = kmap_chunks[i++]; - if (paddr >= phys - && paddr < (phys + size)){ - ret = virt + paddr - phys; - goto exit; - } - } - - ret = (unsigned long) __va(paddr); - } -exit: -#ifdef DEBUGPV - printk ("PTOV(%lx)=%lx\n", paddr, ret); -#endif -#else - ret = (unsigned long)paddr + KERNELBASE; -#endif - return ret; -} - diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index e17fad47062..40f53fbe6d3 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -2,10 +2,6 @@ # Makefile for the linux kernel. # -obj-$(CONFIG_APUS) += apus_setup.o -ifeq ($(CONFIG_APUS),y) -obj-$(CONFIG_PCI) += apus_pci.o -endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o diff --git a/arch/ppc/platforms/apus_pci.c b/arch/ppc/platforms/apus_pci.c deleted file mode 100644 index dc165f0c890..00000000000 --- a/arch/ppc/platforms/apus_pci.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Copyright (C) Michel Dänzer <michdaen@iiic.ethz.ch> - * - * APUS PCI routines. - * - * Currently, only B/CVisionPPC cards (Permedia2) are supported. - * - * Thanks to Geert Uytterhoeven for the idea: - * Read values from given config space(s) for the first devices, -1 otherwise - * - */ - -#ifdef CONFIG_AMIGA - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> - -#include "apus_pci.h" - - -/* These definitions are mostly adapted from pm2fb.c */ - -#undef APUS_PCI_MASTER_DEBUG -#ifdef APUS_PCI_MASTER_DEBUG -#define DPRINTK(a,b...) printk(KERN_DEBUG "apus_pci: %s: " a, __FUNCTION__ , ## b) -#else -#define DPRINTK(a,b...) -#endif - -/* - * The _DEFINITIVE_ memory mapping/unmapping functions. - * This is due to the fact that they're changing soooo often... - */ -#define DEFW() wmb() -#define DEFR() rmb() -#define DEFRW() mb() - -#define DEVNO(d) ((d)>>3) -#define FNNO(d) ((d)&7) - - -extern unsigned long powerup_PCI_present; - -static struct pci_controller *apus_hose; - - -void *pci_io_base(unsigned int bus) -{ - return 0; -} - - -int -apus_pcibios_read_config(struct pci_bus *bus, int devfn, int offset, - int len, u32 *val) -{ - int fnno = FNNO(devfn); - int devno = DEVNO(devfn); - volatile unsigned char *cfg_data; - - if (bus->number > 0 || devno != 1) { - *val = ~0; - return PCIBIOS_DEVICE_NOT_FOUND; - } - /* base address + function offset + offset ^ endianness conversion */ - /* XXX the fnno<<5 bit seems wacky -- paulus */ - cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1)); - switch (len) { - case 1: - *val = readb(cfg_data); - break; - case 2: - *val = readw(cfg_data); - break; - default: - *val = readl(cfg_data); - break; - } - - DPRINTK("read b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n", - bus->number, devfn>>3, devfn&7, offset, len, *val); - return PCIBIOS_SUCCESSFUL; -} - -int -apus_pcibios_write_config(struct pci_bus *bus, int devfn, int offset, - int len, u32 *val) -{ - int fnno = FNNO(devfn); - int devno = DEVNO(devfn); - volatile unsigned char *cfg_data; - - if (bus->number > 0 || devno != 1) { - return PCIBIOS_DEVICE_NOT_FOUND; - } - /* base address + function offset + offset ^ endianness conversion */ - /* XXX the fnno<<5 bit seems wacky -- paulus */ - cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1)); - switch (len) { - case 1: - writeb(val, cfg_data); DEFW(); - break; - case 2: - writew(val, cfg_data); DEFW(); - break; - default: - writel(val, cfg_data); DEFW(); - break; - } - - DPRINTK("write b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n", - bus->number, devfn>>3, devfn&7, offset, len, val); - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops apus_pci_ops = { - apus_pcibios_read_config, - apus_pcibios_write_config -}; - -static struct resource pci_mem = { "B/CVisionPPC PCI mem", CVPPC_FB_APERTURE_ONE, CVPPC_PCI_CONFIG, IORESOURCE_MEM }; - -void __init -apus_pcibios_fixup(void) -{ -/* struct pci_dev *dev = pci_find_slot(0, 1<<3); - unsigned int reg, val, offset;*/ - - /* FIXME: interrupt? */ - /*dev->interrupt = xxx;*/ - - request_resource(&iomem_resource, &pci_mem); - printk("%s: PCI mem resource requested\n", __FUNCTION__); -} - -static void __init apus_pcibios_fixup_bus(struct pci_bus *bus) -{ - bus->resource[1] = &pci_mem; -} - - -/* - * This is from pm2fb.c again - * - * Check if PCI (B/CVisionPPC) is available, initialize it and set up - * the pcibios_* pointers - */ - - -void __init -apus_setup_pci_ptrs(void) -{ - if (!powerup_PCI_present) { - DPRINTK("no PCI bridge detected\n"); - return; - } - DPRINTK("Phase5 B/CVisionPPC PCI bridge detected.\n"); - - apus_hose = pcibios_alloc_controller(); - if (!apus_hose) { - printk("apus_pci: Can't allocate PCI controller structure\n"); - return; - } - - if (!(apus_hose->cfg_data = ioremap(CVPPC_PCI_CONFIG, 256))) { - printk("apus_pci: unable to map PCI config region\n"); - return; - } - - if (!(apus_hose->cfg_addr = ioremap(CSPPC_PCI_BRIDGE, 256))) { - printk("apus_pci: unable to map PCI bridge\n"); - return; - } - - writel(CSPPCF_BRIDGE_BIG_ENDIAN, apus_hose->cfg_addr + CSPPC_BRIDGE_ENDIAN); - DEFW(); - - writel(CVPPC_REGS_REGION, apus_hose->cfg_data+ PCI_BASE_ADDRESS_0); - DEFW(); - writel(CVPPC_FB_APERTURE_ONE, apus_hose->cfg_data + PCI_BASE_ADDRESS_1); - DEFW(); - writel(CVPPC_FB_APERTURE_TWO, apus_hose->cfg_data + PCI_BASE_ADDRESS_2); - DEFW(); - writel(CVPPC_ROM_ADDRESS, apus_hose->cfg_data + PCI_ROM_ADDRESS); - DEFW(); - - writel(0xef000000 | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER, apus_hose->cfg_data + PCI_COMMAND); - DEFW(); - - apus_hose->first_busno = 0; - apus_hose->last_busno = 0; - apus_hose->ops = &apus_pci_ops; - ppc_md.pcibios_fixup = apus_pcibios_fixup; - ppc_md.pcibios_fixup_bus = apus_pcibios_fixup_bus; - - return; -} - -#endif /* CONFIG_AMIGA */ diff --git a/arch/ppc/platforms/apus_pci.h b/arch/ppc/platforms/apus_pci.h deleted file mode 100644 index f15974ae018..00000000000 --- a/arch/ppc/platforms/apus_pci.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer - * driver. - * - * Copyright (c) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT) - * -------------------------------------------------------------------------- - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file README.legal in the main directory of this archive - * for more details. - */ - -#ifndef APUS_PCI_H -#define APUS_PCI_H - - -#define CSPPC_PCI_BRIDGE 0xfffe0000 -#define CSPPC_BRIDGE_ENDIAN 0x0000 -#define CSPPC_BRIDGE_INT 0x0010 - -#define CVPPC_PCI_CONFIG 0xfffc0000 -#define CVPPC_ROM_ADDRESS 0xe2000001 -#define CVPPC_REGS_REGION 0xef000000 -#define CVPPC_FB_APERTURE_ONE 0xe0000000 -#define CVPPC_FB_APERTURE_TWO 0xe1000000 -#define CVPPC_FB_SIZE 0x00800000 - -/* CVPPC_BRIDGE_ENDIAN */ -#define CSPPCF_BRIDGE_BIG_ENDIAN 0x02 - -/* CVPPC_BRIDGE_INT */ -#define CSPPCF_BRIDGE_ACTIVE_INT2 0x01 - - -#endif /* APUS_PCI_H */ diff --git a/arch/ppc/platforms/apus_setup.c b/arch/ppc/platforms/apus_setup.c deleted file mode 100644 index 063274d2c50..00000000000 --- a/arch/ppc/platforms/apus_setup.c +++ /dev/null @@ -1,798 +0,0 @@ -/* - * Copyright (C) 1998, 1999 Jesper Skov - * - * Basically what is needed to replace functionality found in - * arch/m68k allowing Amiga drivers to work under APUS. - * Bits of code and/or ideas from arch/m68k and arch/ppc files. - * - * TODO: - * This file needs a *really* good cleanup. Restructure and optimize. - * Make sure it can be compiled for non-APUS configs. Begin to move - * Amiga specific stuff into mach/amiga. - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/initrd.h> -#include <linux/seq_file.h> - -/* Needs INITSERIAL call in head.S! */ -#undef APUS_DEBUG - -#include <asm/bootinfo.h> -#include <asm/setup.h> -#include <asm/amigahw.h> -#include <asm/amigaints.h> -#include <asm/amigappc.h> -#include <asm/pgtable.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/time.h> - -unsigned long m68k_machtype; -char debug_device[6] = ""; - -extern void amiga_init_IRQ(void); - -extern void apus_setup_pci_ptrs(void); - -void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL; -/* machine dependent irq functions */ -void (*mach_init_IRQ) (void) __initdata = NULL; -void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL; -void (*mach_get_model) (char *model) = NULL; -int (*mach_get_hardware_list) (char *buffer) = NULL; -int (*mach_get_irq_list) (struct seq_file *, void *) = NULL; -void (*mach_process_int) (int, struct pt_regs *) = NULL; -/* machine dependent timer functions */ -unsigned long (*mach_gettimeoffset) (void); -void (*mach_gettod) (int*, int*, int*, int*, int*, int*); -int (*mach_hwclk) (int, struct hwclk_time*) = NULL; -int (*mach_set_clock_mmss) (unsigned long) = NULL; -void (*mach_reset)( void ); -long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */ -#ifdef CONFIG_HEARTBEAT -void (*mach_heartbeat) (int) = NULL; -extern void apus_heartbeat (void); -#endif - -extern unsigned long amiga_model; -extern unsigned decrementer_count;/* count value for 1e6/HZ microseconds */ -extern unsigned count_period_num; /* 1 decrementer count equals */ -extern unsigned count_period_den; /* count_period_num / count_period_den us */ - -int num_memory = 0; -struct mem_info memory[NUM_MEMINFO];/* memory description */ -/* FIXME: Duplicate memory data to avoid conflicts with m68k shared code. */ -int m68k_realnum_memory = 0; -struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */ - -struct mem_info ramdisk; - -extern void config_amiga(void); - -static int __60nsram = 0; - -/* for cpuinfo */ -static int __bus_speed = 0; -static int __speed_test_failed = 0; - -/********************************************** COMPILE PROTECTION */ -/* Provide some stubs that links to Amiga specific functions. - * This allows CONFIG_APUS to be removed from generic PPC files while - * preventing link errors for other PPC targets. - */ -unsigned long apus_get_rtc_time(void) -{ -#ifdef CONFIG_APUS - extern unsigned long m68k_get_rtc_time(void); - - return m68k_get_rtc_time (); -#else - return 0; -#endif -} - -int apus_set_rtc_time(unsigned long nowtime) -{ -#ifdef CONFIG_APUS - extern int m68k_set_rtc_time(unsigned long nowtime); - - return m68k_set_rtc_time (nowtime); -#else - return 0; -#endif -} - -/*********************************************************** SETUP */ -/* From arch/m68k/kernel/setup.c. */ -void __init apus_setup_arch(void) -{ -#ifdef CONFIG_APUS - extern char cmd_line[]; - int i; - char *p, *q; - - /* Let m68k-shared code know it should do the Amiga thing. */ - m68k_machtype = MACH_AMIGA; - - /* Parse the command line for arch-specific options. - * For the m68k, this is currently only "debug=xxx" to enable printing - * certain kernel messages to some machine-specific device. */ - for( p = cmd_line; p && *p; ) { - i = 0; - if (!strncmp( p, "debug=", 6 )) { - strlcpy( debug_device, p+6, sizeof(debug_device) ); - if ((q = strchr( debug_device, ' ' ))) *q = 0; - i = 1; - } else if (!strncmp( p, "60nsram", 7 )) { - APUS_WRITE (APUS_REG_WAITSTATE, - REGWAITSTATE_SETRESET - |REGWAITSTATE_PPCR - |REGWAITSTATE_PPCW); - __60nsram = 1; - i = 1; - } - - if (i) { - /* option processed, delete it */ - if ((q = strchr( p, ' ' ))) - strcpy( p, q+1 ); - else - *p = 0; - } else { - if ((p = strchr( p, ' ' ))) ++p; - } - } - - config_amiga(); - -#if 0 /* Enable for logging - also include logging.o in Makefile rule */ - { -#define LOG_SIZE 4096 - void* base; - - /* Throw away some memory - the P5 firmare stomps on top - * of CHIP memory during bootup. - */ - amiga_chip_alloc(0x1000); - - base = amiga_chip_alloc(LOG_SIZE+sizeof(klog_data_t)); - LOG_INIT(base, base+sizeof(klog_data_t), LOG_SIZE); - } -#endif -#endif -} - -int -apus_show_cpuinfo(struct seq_file *m) -{ - extern int __map_without_bats; - extern unsigned long powerup_PCI_present; - - seq_printf(m, "machine\t\t: Amiga\n"); - seq_printf(m, "bus speed\t: %d%s", __bus_speed, - (__speed_test_failed) ? " [failed]\n" : "\n"); - seq_printf(m, "using BATs\t: %s\n", - (__map_without_bats) ? "No" : "Yes"); - seq_printf(m, "ram speed\t: %dns\n", (__60nsram) ? 60 : 70); - seq_printf(m, "PCI bridge\t: %s\n", - (powerup_PCI_present) ? "Yes" : "No"); - return 0; -} - -static void get_current_tb(unsigned long long *time) -{ - __asm __volatile ("1:mftbu 4 \n\t" - " mftb 5 \n\t" - " mftbu 6 \n\t" - " cmpw 4,6 \n\t" - " bne 1b \n\t" - " stw 4,0(%0)\n\t" - " stw 5,4(%0)\n\t" - : - : "r" (time) - : "r4", "r5", "r6"); -} - - -void apus_calibrate_decr(void) -{ -#ifdef CONFIG_APUS - unsigned long freq; - - /* This algorithm for determining the bus speed was - contributed by Ralph Schmidt. */ - unsigned long long start, stop; - int bus_speed; - int speed_test_failed = 0; - - { - unsigned long loop = amiga_eclock / 10; - - get_current_tb (&start); - while (loop--) { - unsigned char tmp; - - tmp = ciaa.pra; - } - get_current_tb (&stop); - } - - bus_speed = (((unsigned long)(stop-start))*10*4) / 1000000; - if (AMI_1200 == amiga_model) - bus_speed /= 2; - - if ((bus_speed >= 47) && (bus_speed < 53)) { - bus_speed = 50; - freq = 12500000; - } else if ((bus_speed >= 57) && (bus_speed < 63)) { - bus_speed = 60; - freq = 15000000; - } else if ((bus_speed >= 63) && (bus_speed < 69)) { - bus_speed = 67; - freq = 16666667; - } else { - printk ("APUS: Unable to determine bus speed (%d). " - "Defaulting to 50MHz", bus_speed); - bus_speed = 50; - freq = 12500000; - speed_test_failed = 1; - } - - /* Ease diagnostics... */ - { - extern int __map_without_bats; - extern unsigned long powerup_PCI_present; - - printk ("APUS: BATs=%d, BUS=%dMHz", - (__map_without_bats) ? 0 : 1, - bus_speed); - if (speed_test_failed) - printk ("[FAILED - please report]"); - - printk (", RAM=%dns, PCI bridge=%d\n", - (__60nsram) ? 60 : 70, - (powerup_PCI_present) ? 1 : 0); - - /* print a bit more if asked politely... */ - if (!(ciaa.pra & 0x40)){ - extern unsigned int bat_addrs[4][3]; - int b; - for (b = 0; b < 4; ++b) { - printk ("APUS: BAT%d ", b); - printk ("%08x-%08x -> %08x\n", - bat_addrs[b][0], - bat_addrs[b][1], - bat_addrs[b][2]); - } - } - - } - - printk("time_init: decrementer frequency = %lu.%.6lu MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); - - __bus_speed = bus_speed; - __speed_test_failed = speed_test_failed; -#endif -} - -void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ -#ifdef CONFIG_APUS - if (mach_gettod) - mach_gettod(year, mon, day, hour, min, sec); - else - *year = *mon = *day = *hour = *min = *sec = 0; -#endif -} - -/* for "kbd-reset" cmdline param */ -__init -void kbd_reset_setup(char *str, int *ints) -{ -} - -/*********************************************************** MEMORY */ -#define KMAP_MAX 32 -unsigned long kmap_chunks[KMAP_MAX*3]; -int kmap_chunk_count = 0; - -/* From pgtable.h */ -static __inline__ pte_t *my_find_pte(struct mm_struct *mm,unsigned long va) -{ - pgd_t *dir = 0; - pmd_t *pmd = 0; - pte_t *pte = 0; - - va &= PAGE_MASK; - - dir = pgd_offset( mm, va ); - if (dir) - { - pmd = pmd_offset(dir, va & PAGE_MASK); - if (pmd && pmd_present(*pmd)) - { - pte = pte_offset(pmd, va); - } - } - return pte; -} - - -/* Again simulating an m68k/mm/kmap.c function. */ -void kernel_set_cachemode( unsigned long address, unsigned long size, - unsigned int cmode ) -{ - unsigned long mask, flags; - - switch (cmode) - { - case IOMAP_FULL_CACHING: - mask = ~(_PAGE_NO_CACHE | _PAGE_GUARDED); - flags = 0; - break; - case IOMAP_NOCACHE_SER: - mask = ~0; - flags = (_PAGE_NO_CACHE | _PAGE_GUARDED); - break; - default: - panic ("kernel_set_cachemode() doesn't support mode %d\n", - cmode); - break; - } - - size /= PAGE_SIZE; - address &= PAGE_MASK; - while (size--) - { - pte_t *pte; - - pte = my_find_pte(&init_mm, address); - if ( !pte ) - { - printk("pte NULL in kernel_set_cachemode()\n"); - return; - } - - pte_val (*pte) &= mask; - pte_val (*pte) |= flags; - flush_tlb_page(find_vma(&init_mm,address),address); - - address += PAGE_SIZE; - } -} - -unsigned long mm_ptov (unsigned long paddr) -{ - unsigned long ret; - if (paddr < 16*1024*1024) - ret = ZTWO_VADDR(paddr); - else { - int i; - - for (i = 0; i < kmap_chunk_count;){ - unsigned long phys = kmap_chunks[i++]; - unsigned long size = kmap_chunks[i++]; - unsigned long virt = kmap_chunks[i++]; - if (paddr >= phys - && paddr < (phys + size)){ - ret = virt + paddr - phys; - goto exit; - } - } - - ret = (unsigned long) __va(paddr); - } -exit: -#ifdef DEBUGPV - printk ("PTOV(%lx)=%lx\n", paddr, ret); -#endif - return ret; -} - -int mm_end_of_chunk (unsigned long addr, int len) -{ - if (memory[0].addr + memory[0].size == addr + len) - return 1; - return 0; -} - -/*********************************************************** CACHE */ - -#define L1_CACHE_BYTES 32 -#define MAX_CACHE_SIZE 8192 -void cache_push(__u32 addr, int length) -{ - addr = mm_ptov(addr); - - if (MAX_CACHE_SIZE < length) - length = MAX_CACHE_SIZE; - - while(length > 0){ - __asm ("dcbf 0,%0\n\t" - : : "r" (addr)); - addr += L1_CACHE_BYTES; - length -= L1_CACHE_BYTES; - } - /* Also flush trailing block */ - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - : : "r" (addr)); -} - -void cache_clear(__u32 addr, int length) -{ - if (MAX_CACHE_SIZE < length) - length = MAX_CACHE_SIZE; - - addr = mm_ptov(addr); - - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - "icbi 0,%0 \n\t" - "isync \n\t" - : : "r" (addr)); - - addr += L1_CACHE_BYTES; - length -= L1_CACHE_BYTES; - - while(length > 0){ - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - "icbi 0,%0 \n\t" - "isync \n\t" - : : "r" (addr)); - addr += L1_CACHE_BYTES; - length -= L1_CACHE_BYTES; - } - - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - "icbi 0,%0 \n\t" - "isync \n\t" - : : "r" (addr)); -} - -/****************************************************** from setup.c */ -void -apus_restart(char *cmd) -{ - local_irq_disable(); - - APUS_WRITE(APUS_REG_LOCK, - REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK2); - APUS_WRITE(APUS_REG_LOCK, - REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK3); - APUS_WRITE(APUS_REG_LOCK, - REGLOCK_BLACKMAGICK2|REGLOCK_BLACKMAGICK3); - APUS_WRITE(APUS_REG_SHADOW, REGSHADOW_SELFRESET); - APUS_WRITE(APUS_REG_RESET, REGRESET_AMIGARESET); - for(;;); -} - -void -apus_power_off(void) -{ - for (;;); -} - -void -apus_halt(void) -{ - apus_restart(NULL); -} - -/****************************************************** IRQ stuff */ - -static unsigned char last_ipl[8]; - -int apus_get_irq(void) -{ - unsigned char ipl_emu, mask; - unsigned int level; - - APUS_READ(APUS_IPL_EMU, ipl_emu); - level = (ipl_emu >> 3) & IPLEMU_IPLMASK; - mask = IPLEMU_SETRESET|IPLEMU_DISABLEINT|level; - level ^= 7; - - /* Save previous IPL value */ - if (last_ipl[level]) - return -2; - last_ipl[level] = ipl_emu; - - /* Set to current IPL value */ - APUS_WRITE(APUS_IPL_EMU, mask); - APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|level); - - -#ifdef __INTERRUPT_DEBUG - printk("<%d:%d>", level, ~ipl_emu & IPLEMU_IPLMASK); -#endif - return level + IRQ_AMIGA_AUTO; -} - -void apus_end_irq(unsigned int irq) -{ - unsigned char ipl_emu; - unsigned int level = irq - IRQ_AMIGA_AUTO; -#ifdef __INTERRUPT_DEBUG - printk("{%d}", ~last_ipl[level] & IPLEMU_IPLMASK); -#endif - /* Restore IPL to the previous value */ - ipl_emu = last_ipl[level] & IPLEMU_IPLMASK; - APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET|IPLEMU_DISABLEINT|ipl_emu); - last_ipl[level] = 0; - ipl_emu ^= 7; - APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|ipl_emu); -} - -/****************************************************** debugging */ - -/* some serial hardware definitions */ -#define SDR_OVRUN (1<<15) -#define SDR_RBF (1<<14) -#define SDR_TBE (1<<13) -#define SDR_TSRE (1<<12) - -#define AC_SETCLR (1<<15) -#define AC_UARTBRK (1<<11) - -#define SER_DTR (1<<7) -#define SER_RTS (1<<6) -#define SER_DCD (1<<5) -#define SER_CTS (1<<4) -#define SER_DSR (1<<3) - -static __inline__ void ser_RTSon(void) -{ - ciab.pra &= ~SER_RTS; /* active low */ -} - -int __debug_ser_out( unsigned char c ) -{ - amiga_custom.serdat = c | 0x100; - mb(); - while (!(amiga_custom.serdatr & 0x2000)) - barrier(); - return 1; -} - -unsigned char __debug_ser_in( void ) -{ - unsigned char c; - - /* XXX: is that ok?? derived from amiga_ser.c... */ - while( !(amiga_custom.intreqr & IF_RBF) ) - barrier(); - c = amiga_custom.serdatr; - /* clear the interrupt, so that another character can be read */ - amiga_custom.intreq = IF_RBF; - return c; -} - -int __debug_serinit( void ) -{ - unsigned long flags; - - local_irq_save(flags); - - /* turn off Rx and Tx interrupts */ - amiga_custom.intena = IF_RBF | IF_TBE; - - /* clear any pending interrupt */ - amiga_custom.intreq = IF_RBF | IF_TBE; - - local_irq_restore(flags); - - /* - * set the appropriate directions for the modem control flags, - * and clear RTS and DTR - */ - ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */ - ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */ - -#ifdef CONFIG_KGDB - /* turn Rx interrupts on for GDB */ - amiga_custom.intena = IF_SETCLR | IF_RBF; - ser_RTSon(); -#endif - - return 0; -} - -void __debug_print_hex(unsigned long x) -{ - int i; - char hexchars[] = "0123456789ABCDEF"; - - for (i = 0; i < 8; i++) { - __debug_ser_out(hexchars[(x >> 28) & 15]); - x <<= 4; - } - __debug_ser_out('\n'); - __debug_ser_out('\r'); -} - -void __debug_print_string(char* s) -{ - unsigned char c; - while((c = *s++)) - __debug_ser_out(c); - __debug_ser_out('\n'); - __debug_ser_out('\r'); -} - -static void apus_progress(char *s, unsigned short value) -{ - __debug_print_string(s); -} - -/****************************************************** init */ - -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - -extern struct irqaction amiga_sys_irqaction[AUTO_IRQS]; - - -extern void amiga_enable_irq(unsigned int irq); -extern void amiga_disable_irq(unsigned int irq); - -struct hw_interrupt_type amiga_sys_irqctrl = { - .typename = "Amiga IPL", - .end = apus_end_irq, -}; - -struct hw_interrupt_type amiga_irqctrl = { - .typename = "Amiga ", - .enable = amiga_enable_irq, - .disable = amiga_disable_irq, -}; - -#define HARDWARE_MAPPED_SIZE (512*1024) -unsigned long __init apus_find_end_of_memory(void) -{ - int shadow = 0; - unsigned long total; - - /* The memory size reported by ADOS excludes the 512KB - reserved for PPC exception registers and possibly 512KB - containing a shadow of the ADOS ROM. */ - { - unsigned long size = memory[0].size; - - /* If 2MB aligned, size was probably user - specified. We can't tell anything about shadowing - in this case so skip shadow assignment. */ - if (0 != (size & 0x1fffff)){ - /* Align to 512KB to ensure correct handling - of both memfile and system specified - sizes. */ - size = ((size+0x0007ffff) & 0xfff80000); - /* If memory is 1MB aligned, assume - shadowing. */ - shadow = !(size & 0x80000); - } - - /* Add the chunk that ADOS does not see. by aligning - the size to the nearest 2MB limit upwards. */ - memory[0].size = ((size+0x001fffff) & 0xffe00000); - } - - ppc_memstart = memory[0].addr; - ppc_memoffset = PAGE_OFFSET - PPC_MEMSTART; - total = memory[0].size; - - /* Remove the memory chunks that are controlled by special - Phase5 hardware. */ - - /* Remove the upper 512KB if it contains a shadow of - the ADOS ROM. FIXME: It might be possible to - disable this shadow HW. Check the booter - (ppc_boot.c) */ - if (shadow) - total -= HARDWARE_MAPPED_SIZE; - - /* Remove the upper 512KB where the PPC exception - vectors are mapped. */ - total -= HARDWARE_MAPPED_SIZE; - - /* Linux/APUS only handles one block of memory -- the one on - the PowerUP board. Other system memory is horrible slow in - comparison. The user can use other memory for swapping - using the z2ram device. */ - return total; -} - -static void __init -apus_map_io(void) -{ - /* Map PPC exception vectors. */ - io_block_mapping(0xfff00000, 0xfff00000, 0x00020000, _PAGE_KERNEL); - /* Map chip and ZorroII memory */ - io_block_mapping(zTwoBase, 0x00000000, 0x01000000, _PAGE_IO); -} - -__init -void apus_init_IRQ(void) -{ - struct irqaction *action; - int i; - -#ifdef CONFIG_PCI - apus_setup_pci_ptrs(); -#endif - - for ( i = 0 ; i < AMI_IRQS; i++ ) { - irq_desc[i].status = IRQ_LEVEL; - if (i < IRQ_AMIGA_AUTO) { - irq_desc[i].chip = &amiga_irqctrl; - } else { - irq_desc[i].chip = &amiga_sys_irqctrl; - action = &amiga_sys_irqaction[i-IRQ_AMIGA_AUTO]; - if (action->name) - setup_irq(i, action); - } - } - - amiga_init_IRQ(); - -} - -__init -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - extern int parse_bootinfo(const struct bi_record *); - extern char _end[]; - - /* Parse bootinfo. The bootinfo is located right after - the kernel bss */ - parse_bootinfo((const struct bi_record *)&_end); -#ifdef CONFIG_BLK_DEV_INITRD - /* Take care of initrd if we have one. Use data from - bootinfo to avoid the need to initialize PPC - registers when kernel is booted via a PPC reset. */ - if ( ramdisk.addr ) { - initrd_start = (unsigned long) __va(ramdisk.addr); - initrd_end = (unsigned long) - __va(ramdisk.size + ramdisk.addr); - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - ISA_DMA_THRESHOLD = 0x00ffffff; - - ppc_md.setup_arch = apus_setup_arch; - ppc_md.show_cpuinfo = apus_show_cpuinfo; - ppc_md.init_IRQ = apus_init_IRQ; - ppc_md.get_irq = apus_get_irq; - -#ifdef CONFIG_HEARTBEAT - ppc_md.heartbeat = apus_heartbeat; - ppc_md.heartbeat_count = 1; -#endif -#ifdef APUS_DEBUG - __debug_serinit(); - ppc_md.progress = apus_progress; -#endif - ppc_md.init = NULL; - - ppc_md.restart = apus_restart; - ppc_md.power_off = apus_power_off; - ppc_md.halt = apus_halt; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = apus_set_rtc_time; - ppc_md.get_rtc_time = apus_get_rtc_time; - ppc_md.calibrate_decr = apus_calibrate_decr; - - ppc_md.find_end_of_memory = apus_find_end_of_memory; - ppc_md.setup_io_mappings = apus_map_io; -} diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index 0f66f0f82c3..1644e44c875 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -67,7 +67,7 @@ static __inline__ unsigned long ide_default_io_base(int index) #define ide_init_default_irq(base) ide_default_irq(base) #endif -#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE ) +#ifdef CONFIG_BLK_DEV_MPC8xx_IDE #define IDE_ARCH_ACK_INTR 1 #define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1) #endif diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 347de53e49a..e775ff1ca41 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -102,12 +102,8 @@ #else /* 32-bit */ /* Default MSR for kernel mode. */ #ifndef MSR_KERNEL /* reg_booke.h also defines this */ -#ifdef CONFIG_APUS_FAST_EXCEPT -#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR) -#else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) #endif -#endif #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #endif diff --git a/include/asm-ppc/amigahw.h b/include/asm-ppc/amigahw.h deleted file mode 100644 index 90fd1274d72..00000000000 --- a/include/asm-ppc/amigahw.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASMPPC_AMIGAHW_H -#define __ASMPPC_AMIGAHW_H - -#include <asm-m68k/amigahw.h> - -#undef CHIP_PHYSADDR -#ifdef CONFIG_APUS_FAST_EXCEPT -#define CHIP_PHYSADDR (0x000000) -#else -#define CHIP_PHYSADDR (0x004000) -#endif - - -#endif /* __ASMPPC_AMIGAHW_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/amigaints.h b/include/asm-ppc/amigaints.h deleted file mode 100644 index aa3ff6349e8..00000000000 --- a/include/asm-ppc/amigaints.h +++ /dev/null @@ -1,133 +0,0 @@ -/* -** amigaints.h -- Amiga Linux interrupt handling structs and prototypes -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 10/2/92 by Greg Harp -*/ - -#ifdef __KERNEL__ -#ifndef _ASMm68k_AMIGAINTS_H_ -#define _ASMm68k_AMIGAINTS_H_ - -/* -** Amiga Interrupt sources. -** -*/ - -#define AUTO_IRQS (8) -#define AMI_STD_IRQS (14) -#define CIA_IRQS (5) -#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */ - -/* vertical blanking interrupt */ -#define IRQ_AMIGA_VERTB 0 - -/* copper interrupt */ -#define IRQ_AMIGA_COPPER 1 - -/* Audio interrupts */ -#define IRQ_AMIGA_AUD0 2 -#define IRQ_AMIGA_AUD1 3 -#define IRQ_AMIGA_AUD2 4 -#define IRQ_AMIGA_AUD3 5 - -/* Blitter done interrupt */ -#define IRQ_AMIGA_BLIT 6 - -/* floppy disk interrupts */ -#define IRQ_AMIGA_DSKSYN 7 -#define IRQ_AMIGA_DSKBLK 8 - -/* builtin serial port interrupts */ -#define IRQ_AMIGA_RBF 9 -#define IRQ_AMIGA_TBE 10 - -/* software interrupts */ -#define IRQ_AMIGA_SOFT 11 - -/* interrupts from external hardware */ -#define IRQ_AMIGA_PORTS 12 -#define IRQ_AMIGA_EXTER 13 - -/* CIA interrupt sources */ -#define IRQ_AMIGA_CIAA 14 -#define IRQ_AMIGA_CIAA_TA 14 -#define IRQ_AMIGA_CIAA_TB 15 -#define IRQ_AMIGA_CIAA_ALRM 16 -#define IRQ_AMIGA_CIAA_SP 17 -#define IRQ_AMIGA_CIAA_FLG 18 -#define IRQ_AMIGA_CIAB 19 -#define IRQ_AMIGA_CIAB_TA 19 -#define IRQ_AMIGA_CIAB_TB 20 -#define IRQ_AMIGA_CIAB_ALRM 21 -#define IRQ_AMIGA_CIAB_SP 22 -#define IRQ_AMIGA_CIAB_FLG 23 - -/* auto-vector interrupts */ -#define IRQ_AMIGA_AUTO 24 -#define IRQ_AMIGA_AUTO_0 24 /* This is just a dummy */ -#define IRQ_AMIGA_AUTO_1 25 -#define IRQ_AMIGA_AUTO_2 26 -#define IRQ_AMIGA_AUTO_3 27 -#define IRQ_AMIGA_AUTO_4 28 -#define IRQ_AMIGA_AUTO_5 29 -#define IRQ_AMIGA_AUTO_6 30 -#define IRQ_AMIGA_AUTO_7 31 - -#define IRQ_FLOPPY IRQ_AMIGA_DSKBLK - -/* INTREQR masks */ -#define IRQ1_MASK 0x0007 /* INTREQR mask for IRQ 1 */ -#define IRQ2_MASK 0x0008 /* INTREQR mask for IRQ 2 */ -#define IRQ3_MASK 0x0070 /* INTREQR mask for IRQ 3 */ -#define IRQ4_MASK 0x0780 /* INTREQR mask for IRQ 4 */ -#define IRQ5_MASK 0x1800 /* INTREQR mask for IRQ 5 */ -#define IRQ6_MASK 0x2000 /* INTREQR mask for IRQ 6 */ -#define IRQ7_MASK 0x4000 /* INTREQR mask for IRQ 7 */ - -#define IF_SETCLR 0x8000 /* set/clr bit */ -#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */ -#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */ -#define IF_DSKSYN 0x1000 /* disk sync interrupt */ -#define IF_RBF 0x0800 /* serial receive buffer full interrupt */ -#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */ -#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */ -#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */ -#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */ -#define IF_BLIT 0x0040 /* blitter done interrupt */ -#define IF_VERTB 0x0020 /* vertical blanking interrupt */ -#define IF_COPER 0x0010 /* copper interrupt */ -#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */ -#define IF_SOFT 0x0004 /* software initiated interrupt */ -#define IF_DSKBLK 0x0002 /* diskblock DMA finished */ -#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */ - -extern void amiga_do_irq(int irq, struct pt_regs *fp); -extern void amiga_do_irq_list(int irq, struct pt_regs *fp); - -/* CIA interrupt control register bits */ - -#define CIA_ICR_TA 0x01 -#define CIA_ICR_TB 0x02 -#define CIA_ICR_ALRM 0x04 -#define CIA_ICR_SP 0x08 -#define CIA_ICR_FLG 0x10 -#define CIA_ICR_ALL 0x1f -#define CIA_ICR_SETCLR 0x80 - -/* to access the interrupt control registers of CIA's use only -** these functions, they behave exactly like the amiga os routines -*/ - -extern struct ciabase ciaa_base, ciab_base; - -extern unsigned char cia_set_irq(unsigned int irq, int set); -extern unsigned char cia_able_irq(unsigned int irq, int enable); - -#endif /* asm-m68k/amigaints.h */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/amigappc.h b/include/asm-ppc/amigappc.h deleted file mode 100644 index 35114ce5135..00000000000 --- a/include/asm-ppc/amigappc.h +++ /dev/null @@ -1,85 +0,0 @@ -/* -** asm-ppc/amigappc.h -- This header defines some values and pointers for -** the Phase 5 PowerUp card. -** -** Copyright 1997, 1998 by Phase5, Germany. -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 7/22/97 by Jesper Skov -*/ - -#ifdef __KERNEL__ -#ifndef _M68K_AMIGAPPC_H -#define _M68K_AMIGAPPC_H - -#ifndef __ASSEMBLY__ - -/* #include <asm/system.h> */ -#define mb() __asm__ __volatile__ ("sync" : : : "memory") - -#define APUS_WRITE(_a_, _v_) \ -do { \ - (*((volatile unsigned char *)(_a_)) = (_v_)); \ - mb(); \ -} while (0) - -#define APUS_READ(_a_, _v_) \ -do { \ - (_v_) = (*((volatile unsigned char *)(_a_))); \ - mb(); \ -} while (0) -#endif /* ndef __ASSEMBLY__ */ - -/* Maybe add a [#ifdef WANT_ZTWOBASE] condition to amigahw.h? */ -#define zTwoBase (0x80000000) - -#define APUS_IPL_BASE (zTwoBase + 0x00f60000) -#define APUS_REG_RESET (APUS_IPL_BASE + 0x00) -#define APUS_REG_WAITSTATE (APUS_IPL_BASE + 0x10) -#define APUS_REG_SHADOW (APUS_IPL_BASE + 0x18) -#define APUS_REG_LOCK (APUS_IPL_BASE + 0x20) -#define APUS_REG_INT (APUS_IPL_BASE + 0x28) -#define APUS_IPL_EMU (APUS_IPL_BASE + 0x30) -#define APUS_INT_LVL (APUS_IPL_BASE + 0x38) - -#define REGSHADOW_SETRESET (0x80) -#define REGSHADOW_SELFRESET (0x40) - -#define REGLOCK_SETRESET (0x80) -#define REGLOCK_BLACKMAGICK1 (0x40) -#define REGLOCK_BLACKMAGICK2 (0x20) -#define REGLOCK_BLACKMAGICK3 (0x10) - -#define REGWAITSTATE_SETRESET (0x80) -#define REGWAITSTATE_PPCW (0x08) -#define REGWAITSTATE_PPCR (0x04) - -#define REGRESET_SETRESET (0x80) -#define REGRESET_PPCRESET (0x10) -#define REGRESET_M68KRESET (0x08) -#define REGRESET_AMIGARESET (0x04) -#define REGRESET_AUXRESET (0x02) -#define REGRESET_SCSIRESET (0x01) - -#define REGINT_SETRESET (0x80) -#define REGINT_ENABLEIPL (0x02) -#define REGINT_INTMASTER (0x01) - -#define IPLEMU_SETRESET (0x80) -#define IPLEMU_DISABLEINT (0x40) -#define IPLEMU_IPL2 (0x20) -#define IPLEMU_IPL1 (0x10) -#define IPLEMU_IPL0 (0x08) -#define IPLEMU_PPCIPL2 (0x04) -#define IPLEMU_PPCIPL1 (0x02) -#define IPLEMU_PPCIPL0 (0x01) -#define IPLEMU_IPLMASK (IPLEMU_PPCIPL2|IPLEMU_PPCIPL1|IPLEMU_PPCIPL0) - -#define INTLVL_SETRESET (0x80) -#define INTLVL_MASK (0x7f) - -#endif /* _M68k_AMIGAPPC_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h index 2ace4a74f26..f6ed77aee32 100644 --- a/include/asm-ppc/bootinfo.h +++ b/include/asm-ppc/bootinfo.h @@ -11,10 +11,6 @@ #include <asm/page.h> -#if defined(CONFIG_APUS) && !defined(__BOOTER__) -#include <asm-m68k/bootinfo.h> -#else - struct bi_record { unsigned long tag; /* tag ID */ unsigned long size; /* size of record (in bytes) */ @@ -44,7 +40,6 @@ bootinfo_addr(unsigned long offset) return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1, (1 << 20)); } -#endif /* CONFIG_APUS */ #endif /* _PPC_BOOTINFO_H */ diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index f776c49f557..8f58231a8bc 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -30,7 +30,7 @@ #include <asm/mpc8xx.h> #elif defined(CONFIG_8260) #include <asm/mpc8260.h> -#elif defined(CONFIG_APUS) || !defined(CONFIG_PCI) +#elif !defined(CONFIG_PCI) #define _IO_BASE 0 #define _ISA_MEM_BASE 0 #define PCI_DRAM_OFFSET 0 @@ -145,24 +145,7 @@ static inline void writeb(__u8 b, volatile void __iomem *addr) } #endif -#if defined(CONFIG_APUS) -static inline __u16 readw(const volatile void __iomem *addr) -{ - return *(__force volatile __u16 *)(addr); -} -static inline __u32 readl(const volatile void __iomem *addr) -{ - return *(__force volatile __u32 *)(addr); -} -static inline void writew(__u16 b, volatile void __iomem *addr) -{ - *(__force volatile __u16 *)(addr) = b; -} -static inline void writel(__u32 b, volatile void __iomem *addr) -{ - *(__force volatile __u32 *)(addr) = b; -} -#elif defined (CONFIG_8260_PCI9) +#if defined (CONFIG_8260_PCI9) /* Use macros if PCI9 workaround enabled */ #define readw(addr) in_le16((volatile u16 *)(addr)) #define readl(addr) in_le32((volatile u32 *)(addr)) @@ -185,7 +168,7 @@ static inline void writel(__u32 b, volatile void __iomem *addr) { out_le32(addr, b); } -#endif /* CONFIG_APUS */ +#endif /* CONFIG_8260_PCI9 */ #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) @@ -300,13 +283,7 @@ extern __inline__ void name(unsigned int val, unsigned int port) \ } __do_out_asm(outb, "stbx") -#ifdef CONFIG_APUS -__do_in_asm(inb, "lbzx") -__do_in_asm(inw, "lhz%U1%X1") -__do_in_asm(inl, "lwz%U1%X1") -__do_out_asm(outl,"stw%U0%X0") -__do_out_asm(outw, "sth%U0%X0") -#elif defined (CONFIG_8260_PCI9) +#if defined (CONFIG_8260_PCI9) /* in asm cannot be defined if PCI9 workaround is used */ #define inb(port) in_8((port)+___IO_BASE) #define inw(port) in_le16((port)+___IO_BASE) @@ -371,7 +348,6 @@ extern void __iomem *ioremap64(unsigned long long address, unsigned long size); #define ioremap_nocache(addr, size) ioremap((addr), (size)) extern void iounmap(volatile void __iomem *addr); extern unsigned long iopa(unsigned long addr); -extern unsigned long mm_ptov(unsigned long addr) __attribute_const__; extern void io_block_mapping(unsigned long virt, phys_addr_t phys, unsigned int size, int flags); @@ -384,24 +360,16 @@ extern void io_block_mapping(unsigned long virt, phys_addr_t phys, */ extern inline unsigned long virt_to_bus(volatile void * address) { -#ifndef CONFIG_APUS if (address == (void *)0) return 0; return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET; -#else - return iopa ((unsigned long) address); -#endif } extern inline void * bus_to_virt(unsigned long address) { -#ifndef CONFIG_APUS if (address == 0) return NULL; return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE); -#else - return (void*) mm_ptov (address); -#endif } /* @@ -410,20 +378,12 @@ extern inline void * bus_to_virt(unsigned long address) */ extern inline unsigned long virt_to_phys(volatile void * address) { -#ifndef CONFIG_APUS return (unsigned long) address - KERNELBASE; -#else - return iopa ((unsigned long) address); -#endif } extern inline void * phys_to_virt(unsigned long address) { -#ifndef CONFIG_APUS return (void *) (address + KERNELBASE); -#else - return (void*) mm_ptov (address); -#endif } /* diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h index 293a444a1d7..a20b499b018 100644 --- a/include/asm-ppc/machdep.h +++ b/include/asm-ppc/machdep.h @@ -8,10 +8,6 @@ #include <asm/setup.h> #include <asm/page.h> -#ifdef CONFIG_APUS -#include <asm-m68k/machdep.h> -#endif - struct pt_regs; struct pci_bus; struct pci_dev; diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h index fe95c8258cf..ad4c5a1bc9d 100644 --- a/include/asm-ppc/page.h +++ b/include/asm-ppc/page.h @@ -97,62 +97,22 @@ extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *pg); -#ifndef CONFIG_APUS #define PPC_MEMSTART 0 -#define PPC_PGSTART 0 #define PPC_MEMOFFSET PAGE_OFFSET -#else -extern unsigned long ppc_memstart; -extern unsigned long ppc_pgstart; -extern unsigned long ppc_memoffset; -#define PPC_MEMSTART ppc_memstart -#define PPC_PGSTART ppc_pgstart -#define PPC_MEMOFFSET ppc_memoffset -#endif -#if defined(CONFIG_APUS) && !defined(MODULE) -/* map phys->virtual and virtual->phys for RAM pages */ -static inline unsigned long ___pa(unsigned long v) -{ - unsigned long p; - asm volatile ("1: addis %0, %1, %2;" - ".section \".vtop_fixup\",\"aw\";" - ".align 1;" - ".long 1b;" - ".previous;" - : "=r" (p) - : "b" (v), "K" (((-PAGE_OFFSET) >> 16) & 0xffff)); - - return p; -} -static inline void* ___va(unsigned long p) -{ - unsigned long v; - asm volatile ("1: addis %0, %1, %2;" - ".section \".ptov_fixup\",\"aw\";" - ".align 1;" - ".long 1b;" - ".previous;" - : "=r" (v) - : "b" (p), "K" (((PAGE_OFFSET) >> 16) & 0xffff)); - - return (void*) v; -} -#else #define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET) #define ___va(paddr) ((paddr)+PPC_MEMOFFSET) -#endif extern int page_is_ram(unsigned long pfn); #define __pa(x) ___pa((unsigned long)(x)) #define __va(x) ((void *)(___va((unsigned long)(x)))) -#define ARCH_PFN_OFFSET (PPC_PGSTART) +#define ARCH_PFN_OFFSET 0 #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) -#define pfn_valid(pfn) (((pfn) - PPC_PGSTART) < max_mapnr) +#define pfn_valid(pfn) ((pfn) < max_mapnr) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) /* Pure 2^n version of get_order */ diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h index c159315d2c8..063ad91cbbc 100644 --- a/include/asm-ppc/pgtable.h +++ b/include/asm-ppc/pgtable.h @@ -765,14 +765,6 @@ extern void paging_init(void); #define pte_to_pgoff(pte) (pte_val(pte) >> 3) #define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) -/* CONFIG_APUS */ -/* For virtual address to physical address conversion */ -extern void cache_clear(__u32 addr, int length); -extern void cache_push(__u32 addr, int length); -extern int mm_end_of_chunk (unsigned long addr, int len); -extern unsigned long iopa(unsigned long addr); -extern unsigned long mm_ptov(unsigned long addr) __attribute_const__; - /* Values for nocacheflag and cmode */ /* These are not used by the APUS kernel_map, but prevents compilation errors. */ |