diff options
135 files changed, 3346 insertions, 5052 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7a74e3e5f91..50b9afa8ae6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -99,13 +99,6 @@ config ARCH_EBSA110 Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. -config ARCH_CAMELOT - bool "Epxa10db" - help - This enables support for Altera's Excalibur XA10 development board. - If you would like to build your kernel to run on one of these boards - then you must say 'Y' here. Otherwise say 'N' - config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE @@ -213,12 +206,16 @@ config ARCH_AAEC2000 help This enables support for systems based on the Agilent AAEC-2000 +config ARCH_AT91RM9200 + bool "AT91RM9200" + help + Say Y here if you intend to run this kernel on an AT91RM9200-based + board. + endchoice source "arch/arm/mach-clps711x/Kconfig" -source "arch/arm/mach-epxa10db/Kconfig" - source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" @@ -253,6 +250,8 @@ source "arch/arm/mach-aaec2000/Kconfig" source "arch/arm/mach-realview/Kconfig" +source "arch/arm/mach-at91rm9200/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -418,7 +417,8 @@ config LEDS ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ - ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE + ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ + ARCH_AT91RM9200 help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index afaf3a1e903..1fa2a101158 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -84,7 +84,6 @@ endif machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_INTEGRATOR) := integrator - machine-$(CONFIG_ARCH_CAMELOT) := epxa10db textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_IOP3XX) := iop3xx @@ -100,6 +99,7 @@ endif machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview + machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 6b505ce41a7..35ffe0f4ece 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -21,10 +21,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y) OBJS += head-shark.o ofw-shark.o endif -ifeq ($(CONFIG_ARCH_CAMELOT),y) -OBJS += head-epxa10db.o -endif - ifeq ($(CONFIG_ARCH_L7200),y) OBJS += head-l7200.o endif @@ -50,6 +46,10 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif +ifeq ($(CONFIG_ARCH_AT91RM9200),y) +OBJS += head-at91rm9200.o +endif + ifeq ($(CONFIG_DEBUG_ICEDCC),y) OBJS += ice-dcc.o endif diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S new file mode 100644 index 00000000000..2119ea62b54 --- /dev/null +++ b/arch/arm/boot/compressed/head-at91rm9200.S @@ -0,0 +1,57 @@ +/* + * linux/arch/arm/boot/compressed/head-at91rm9200.S + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach-types.h> + + .section ".start", "ax" + + @ Atmel AT91RM9200-DK : 262 + mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff) + orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00) + cmp r7, r3 + beq 99f + + @ Cogent CSB337 : 399 + mov r3, #(MACH_TYPE_CSB337 & 0xff) + orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00) + cmp r7, r3 + beq 99f + + @ Cogent CSB637 : 648 + mov r3, #(MACH_TYPE_CSB637 & 0xff) + orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00) + cmp r7, r3 + beq 99f + + @ Atmel AT91RM9200-EK : 705 + mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff) + orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00) + cmp r7, r3 + beq 99f + + @ Conitec Carmeva : 769 + mov r3, #(MACH_TYPE_CARMEVA & 0xff) + orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00) + cmp r7, r3 + beq 99f + + @ KwikByte KB920x : 612 + mov r3, #(MACH_TYPE_KB9200 & 0xff) + orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00) + cmp r7, r3 + beq 99f + + @ Unknown board, use the AT91RM9200DK board + @ mov r7, #MACH_TYPE_AT91RM9200 + mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) + orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00) + +99: diff --git a/arch/arm/boot/compressed/head-epxa10db.S b/arch/arm/boot/compressed/head-epxa10db.S deleted file mode 100644 index 757681f12a3..00000000000 --- a/arch/arm/boot/compressed/head-epxa10db.S +++ /dev/null @@ -1,5 +0,0 @@ -#include <asm/mach-types.h> -#include <asm/arch/excalibur.h> - - .section ".start", "ax" - mov r7, #MACH_TYPE_CAMELOT diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index ccbb4c0d58c..089c9d59840 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5d92af975d8..cfe6bd8e81c 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig index 35e3a99bcbb..6886001b536 100644 --- a/arch/arm/configs/bast_defconfig +++ b/arch/arm/configs/bast_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index d8fe0f40408..f81a60005cd 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -65,7 +65,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/clps7500_defconfig b/arch/arm/configs/clps7500_defconfig index 90875837140..af9ae538913 100644 --- a/arch/arm/configs/clps7500_defconfig +++ b/arch/arm/configs/clps7500_defconfig @@ -57,7 +57,6 @@ CONFIG_ARCH_CLPS7500=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 40dfe07a8bc..15468a0cf70 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -71,7 +71,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 06229026f78..3c3461e8339 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -87,7 +87,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig index 6f61929b97a..afcfff6140f 100644 --- a/arch/arm/configs/ebsa110_defconfig +++ b/arch/arm/configs/ebsa110_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set CONFIG_ARCH_EBSA110=y -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig index 78b08ed4d5f..6ba7355ff85 100644 --- a/arch/arm/configs/edb7211_defconfig +++ b/arch/arm/configs/edb7211_defconfig @@ -57,7 +57,6 @@ CONFIG_BASE_SMALL=0 CONFIG_ARCH_CLPS711X=y # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index fd7c0042bcc..9592e3925c7 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/ep80219_defconfig index 96342afa9c5..fbe312e757c 100644 --- a/arch/arm/configs/ep80219_defconfig +++ b/arch/arm/configs/ep80219_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/epxa10db_defconfig b/arch/arm/configs/epxa10db_defconfig deleted file mode 100644 index 9fb8b58c495..00000000000 --- a/arch/arm/configs/epxa10db_defconfig +++ /dev/null @@ -1,644 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:46:51 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -CONFIG_ARCH_CAMELOT=y -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# Epxa10db -# - -# -# PLD hotswap support -# -CONFIG_PLD=y -# CONFIG_PLD_HOTSWAP is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM922T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyUA0,115200 initrd=0x00200000,8M root=/dev/ram0 rw" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=y -CONFIG_PPP_DEFLATE=y -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_UART00=y -CONFIG_SERIAL_UART00_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 9737c485072..2a612d23120 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set CONFIG_ARCH_FOOTBRIDGE=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig index b6f688d850d..65dc73a88c4 100644 --- a/arch/arm/configs/fortunet_defconfig +++ b/arch/arm/configs/fortunet_defconfig @@ -57,7 +57,6 @@ CONFIG_BASE_SMALL=0 CONFIG_ARCH_CLPS711X=y # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index b9de07de80f..7a0da0b7fac 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig index 39c13a35454..116920aecef 100644 --- a/arch/arm/configs/h7201_defconfig +++ b/arch/arm/configs/h7201_defconfig @@ -60,7 +60,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index fbf5c244c69..9d62ed16bf5 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index fb41a36a5a6..a45b57582b8 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 27ee7682525..d1ba7fdde81 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -65,7 +65,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set CONFIG_ARCH_INTEGRATOR=y # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig index e71443b9739..c07628ceaf0 100644 --- a/arch/arm/configs/iq31244_defconfig +++ b/arch/arm/configs/iq31244_defconfig @@ -65,7 +65,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig index ab5ad23b27d..18fa1615fdf 100644 --- a/arch/arm/configs/iq80321_defconfig +++ b/arch/arm/configs/iq80321_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig index bb536133ef8..f50035de1ff 100644 --- a/arch/arm/configs/iq80331_defconfig +++ b/arch/arm/configs/iq80331_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iq80332_defconfig index 305f01f3a72..18b3f372ed6 100644 --- a/arch/arm/configs/iq80332_defconfig +++ b/arch/arm/configs/iq80332_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_IOP3XX=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index e6a4d2656fe..d9d6bb86a6f 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 5572cf95d5f..2dc9d499c7d 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 0fddbde8583..4248123815e 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 89b9aa06aa9..ea8f4b478fa 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 613afab6272..4975b914f92 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index b88aeba82bc..ad1048db96f 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 7033829ed14..c3a93284416 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -62,7 +62,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig index d64706d3ff3..67eaa26c264 100644 --- a/arch/arm/configs/lpd7a400_defconfig +++ b/arch/arm/configs/lpd7a400_defconfig @@ -60,7 +60,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 87cbedfb303..208d591ebfc 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -60,7 +60,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index 4bc8717c6f5..81daadcbe0b 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig index 3ca64cabc92..42f6a77bc3c 100644 --- a/arch/arm/configs/lusl7200_defconfig +++ b/arch/arm/configs/lusl7200_defconfig @@ -62,7 +62,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index 153d68594be..b112bd75bda 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig index 6517d167acf..d16f6cd6e03 100644 --- a/arch/arm/configs/mx1ads_defconfig +++ b/arch/arm/configs/mx1ads_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 7fb1f7c7bf4..3d35255c64e 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index 6e81acf94c2..2cae1ead9f9 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -58,7 +58,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set CONFIG_ARCH_FOOTBRIDGE=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 529f0f72e1e..ee3ecbd9002 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index 10fec890578..24e8bdd4cb9 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -63,7 +63,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 21c327883d8..b71d31a4bb5 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 0485b2f1cc2..3f1ec4e304f 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 19184c1010a..b498afdc03b 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 3f97590c91f..33f31080a98 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index e3facc4fe79..d052c8f8051 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -62,7 +62,6 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index 271823f0d70..c48d1706226 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -66,7 +66,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 5373eeb7d57..2e5a616cc98 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/smdk2410_defconfig b/arch/arm/configs/smdk2410_defconfig index 2c60865fda1..4d123d33c7d 100644 --- a/arch/arm/configs/smdk2410_defconfig +++ b/arch/arm/configs/smdk2410_defconfig @@ -58,7 +58,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 9895539533d..d1ace3abfd8 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -87,7 +87,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index d72f2c75426..2687a225aa6 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -64,7 +64,6 @@ CONFIG_KMOD=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index b5645c4462c..1d50d2b98f5 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -710,7 +710,8 @@ int setup_irq(unsigned int irq, struct irqaction *new) desc->pending = 0; desc->disable_depth = 1; - if (new->flags & SA_TRIGGER_MASK) { + if (new->flags & SA_TRIGGER_MASK && + desc->chip->set_type) { unsigned int type = new->flags & SA_TRIGGER_MASK; desc->chip->set_type(irq, type); } diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig new file mode 100644 index 00000000000..4b7218fc3eb --- /dev/null +++ b/arch/arm/mach-at91rm9200/Kconfig @@ -0,0 +1,54 @@ +if ARCH_AT91RM9200 + +menu "AT91RM9200 Implementations" + +comment "AT91RM9200 Board Type" + +config ARCH_AT91RM9200DK + bool "Atmel AT91RM9200-DK Development board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Atmel's AT91RM9200-DK Development board + +config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + depends on ARCH_AT91RM9200 + help + Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit + +config MACH_CSB337 + bool "Cogent CSB337 board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Cogent's CSB337 board + +config MACH_CSB637 + bool "Cogent CSB637 board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Cogent's CSB637 board + +config MACH_CARMEVA + bool "Conitec's ARM&EVA" + depends on ARCH_AT91RM9200 + help + Select this if you are using Conitec's AT91RM9200-MCU-Module + +config MACH_KB9200 + bool "KwikByte's KB920x" + depends on ARCH_AT91RM9200 + help + Select this if you are using KwikByte's KB920x board + + +comment "AT91RM9200 Feature Selections" + +config AT91_PROGRAMMABLE_CLOCKS + bool "Programmable Clocks" + help + Select this if you need to program one or more of the PCK0..PCK3 + programmable clock outputs. + +endmenu + +endif diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile new file mode 100644 index 00000000000..1f2805ca6e2 --- /dev/null +++ b/arch/arm/mach-at91rm9200/Makefile @@ -0,0 +1,27 @@ +# +# Makefile for the linux kernel. +# + +obj-y := clock.o irq.o time.o gpio.o common.o devices.o +obj-m := +obj-n := +obj- := + +# Board-specific support +#obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o +#obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +#obj-$(CONFIG_MACH_CSB337) += board-csb337.o +#obj-$(CONFIG_MACH_CSB637) += board-csb637.o +#obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o +#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o + +# LEDs support +#led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o +#led-$(CONFIG_MACH_AT91RM9200EK) += leds.o +#led-$(CONFIG_MACH_CSB337) += leds.o +#led-$(CONFIG_MACH_CSB637) += leds.o +#led-$(CONFIG_MACH_KB9200) += leds.o +obj-$(CONFIG_LEDS) += $(led-y) + +# VGA support +#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o diff --git a/arch/arm/mach-at91rm9200/Makefile.boot b/arch/arm/mach-at91rm9200/Makefile.boot new file mode 100644 index 00000000000..e667dcc7cd3 --- /dev/null +++ b/arch/arm/mach-at91rm9200/Makefile.boot @@ -0,0 +1,9 @@ +# Note: the following conditions must always be true: +# ZRELADDR == virt_to_phys(TEXTADDR) +# PARAMS_PHYS must be within 4MB of ZRELADDR +# INITRD_PHYS must be in RAM + + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 +initrd_phys-y := 0x20410000 + diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c new file mode 100644 index 00000000000..ec8195a2a3c --- /dev/null +++ b/arch/arm/mach-at91rm9200/clock.c @@ -0,0 +1,620 @@ +/* + * linux/arch/arm/mach-at91rm9200/clock.c + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/clk.h> + +#include <asm/semaphore.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +#include <asm/arch/hardware.h> +#include <asm/arch/board.h> /* for master clock global */ + +#include "generic.h" + +#undef DEBUG + +/* + * There's a lot more which can be done with clocks, including cpufreq + * integration, slow clock mode support (for system suspend), letting + * PLLB be used at other rates (on boards that don't need USB), etc. + */ + +struct clk { + const char *name; + unsigned long rate_hz; + struct clk *parent; + u32 pmc_mask; + void (*mode)(struct clk *, int); + unsigned id:2; /* PCK0..3, or 32k/main/a/b */ + unsigned primary:1; + unsigned pll:1; + unsigned programmable:1; + u16 users; +}; + +static spinlock_t clk_lock; +static u32 at91_pllb_usb_init; + +/* + * Four primary clock sources: two crystal oscillators (32K, main), and + * two PLLs. PLLA usually runs the master clock; and PLLB must run at + * 48 MHz (unless no USB function clocks are needed). The main clock and + * both PLLs are turned off to run in "slow clock mode" (system suspend). + */ +static struct clk clk32k = { + .name = "clk32k", + .rate_hz = AT91_SLOW_CLOCK, + .users = 1, /* always on */ + .id = 0, + .primary = 1, +}; +static struct clk main_clk = { + .name = "main", + .pmc_mask = 1 << 0, /* in PMC_SR */ + .users = 1, + .id = 1, + .primary = 1, +}; +static struct clk plla = { + .name = "plla", + .parent = &main_clk, + .pmc_mask = 1 << 1, /* in PMC_SR */ + .id = 2, + .primary = 1, + .pll = 1, +}; + +static void pllb_mode(struct clk *clk, int is_on) +{ + u32 value; + + if (is_on) { + is_on = AT91_PMC_LOCKB; + value = at91_pllb_usb_init; + } else + value = 0; + + at91_sys_write(AT91_CKGR_PLLBR, value); + + do { + cpu_relax(); + } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); +} + +static struct clk pllb = { + .name = "pllb", + .parent = &main_clk, + .pmc_mask = 1 << 2, /* in PMC_SR */ + .mode = pllb_mode, + .id = 3, + .primary = 1, + .pll = 1, +}; + +static void pmc_sys_mode(struct clk *clk, int is_on) +{ + if (is_on) + at91_sys_write(AT91_PMC_SCER, clk->pmc_mask); + else + at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); +} + +/* USB function clocks (PLLB must be 48 MHz) */ +static struct clk udpck = { + .name = "udpck", + .parent = &pllb, + .pmc_mask = AT91_PMC_UDP, + .mode = pmc_sys_mode, +}; +static struct clk uhpck = { + .name = "uhpck", + .parent = &pllb, + .pmc_mask = AT91_PMC_UHP, + .mode = pmc_sys_mode, +}; + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS +/* + * The four programmable clocks can be parented by any primary clock. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .mode = pmc_sys_mode, + .programmable = 1, + .id = 3, +}; +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + + +/* + * The master clock is divided from the CPU clock (by 1-4). It's used for + * memory, interfaces to on-chip peripherals, the AIC, and sometimes more + * (e.g baud rate generation). It's sourced from one of the primary clocks. + */ +static struct clk mck = { + .name = "mck", + .pmc_mask = 1 << 3, /* in PMC_SR */ + .users = 1, /* (must be) always on */ +}; + +static void pmc_periph_mode(struct clk *clk, int is_on) +{ + if (is_on) + at91_sys_write(AT91_PMC_PCER, clk->pmc_mask); + else + at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask); +} + +static struct clk udc_clk = { + .name = "udc_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_UDP, + .mode = pmc_periph_mode, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_UHP, + .mode = pmc_periph_mode, +}; + +static struct clk *const clock_list[] = { + /* four primary clocks -- MUST BE FIRST! */ + &clk32k, + &main_clk, + &plla, + &pllb, + + /* PLLB children (USB) */ + &udpck, + &uhpck, + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + /* programmable clocks */ + &pck0, + &pck1, + &pck2, + &pck3, +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + + /* MCK and peripherals */ + &mck, + // usart0..usart3 + // mmc + &udc_clk, + // i2c + // spi + // ssc0..ssc2 + // tc0..tc5 + &ohci_clk, + // ether +}; + + +/* clocks are all static for now; no refcounting necessary */ +struct clk *clk_get(struct device *dev, const char *id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(clock_list); i++) { + if (strcmp(id, clock_list[i]->name) == 0) + return clock_list[i]; + } + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +static void __clk_enable(struct clk *clk) +{ + if (clk->parent) + __clk_enable(clk->parent); + if (clk->users++ == 0 && clk->mode) + clk->mode(clk, 1); +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void __clk_disable(struct clk *clk) +{ + BUG_ON(clk->users == 0); + if (--clk->users == 0 && clk->mode) + clk->mode(clk, 0); + if (clk->parent) + __clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long rate; + + spin_lock_irqsave(&clk_lock, flags); + for (;;) { + rate = clk->rate_hz; + if (rate || !clk->parent) + break; + clk = clk->parent; + } + spin_unlock_irqrestore(&clk_lock, flags); + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/*------------------------------------------------------------------------*/ + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + +/* + * For now, only the programmable clocks support reparenting (MCK could + * do this too, with care) or rate changing (the PLLs could do this too, + * ditto MCK but that's more for cpufreq). Drivers may reparent to get + * a better rate match; we don't. + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + unsigned prescale; + unsigned long actual; + + if (!clk->programmable) + return -EINVAL; + spin_lock_irqsave(&clk_lock, flags); + + actual = clk->parent->rate_hz; + for (prescale = 0; prescale < 7; prescale++) { + if (actual && actual <= rate) + break; + actual >>= 1; + } + + spin_unlock_irqrestore(&clk_lock, flags); + return (prescale < 7) ? actual : -ENOENT; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + unsigned prescale; + unsigned long actual; + + if (!clk->programmable) + return -EINVAL; + if (clk->users) + return -EBUSY; + spin_lock_irqsave(&clk_lock, flags); + + actual = clk->parent->rate_hz; + for (prescale = 0; prescale < 7; prescale++) { + if (actual && actual <= rate) { + u32 pckr; + + pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); + pckr &= 0x03; + pckr |= prescale << 2; + at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); + clk->rate_hz = actual; + break; + } + actual >>= 1; + } + + spin_unlock_irqrestore(&clk_lock, flags); + return (prescale < 7) ? actual : -ENOENT; +} +EXPORT_SYMBOL(clk_set_rate); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + + if (clk->users) + return -EBUSY; + if (!parent->primary || !clk->programmable) + return -EINVAL; + spin_lock_irqsave(&clk_lock, flags); + + clk->rate_hz = parent->rate_hz; + clk->parent = parent; + at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id); + + spin_unlock_irqrestore(&clk_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + +/*------------------------------------------------------------------------*/ + +#ifdef CONFIG_DEBUG_FS + +static int at91_clk_show(struct seq_file *s, void *unused) +{ + u32 scsr, pcsr, sr; + unsigned i; + + seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); + seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR)); + + seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); + seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); + seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); + seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); + + seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + for (i = 0; i < 4; i++) + seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i))); + seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); + + seq_printf(s, "\n"); + + for (i = 0; i < ARRAY_SIZE(clock_list); i++) { + char *state; + struct clk *clk = clock_list[i]; + + if (clk->mode == pmc_sys_mode) + state = (scsr & clk->pmc_mask) ? "on" : "off"; + else if (clk->mode == pmc_periph_mode) + state = (pcsr & clk->pmc_mask) ? "on" : "off"; + else if (clk->pmc_mask) + state = (sr & clk->pmc_mask) ? "on" : "off"; + else if (clk == &clk32k || clk == &main_clk) + state = "on"; + else + state = ""; + + seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n", + clk->name, clk->users, state, clk_get_rate(clk), + clk->parent ? clk->parent->name : ""); + } + return 0; +} + +static int at91_clk_open(struct inode *inode, struct file *file) +{ + return single_open(file, at91_clk_show, NULL); +} + +static struct file_operations at91_clk_operations = { + .open = at91_clk_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init at91_clk_debugfs_init(void) +{ + /* /sys/kernel/debug/at91_clk */ + (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations); + + return 0; +} +postcore_initcall(at91_clk_debugfs_init); + +#endif + +/*------------------------------------------------------------------------*/ + +static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 16) & 0x7ff; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else + freq = 0; + if (pll == &pllb && (reg & (1 << 28))) + freq /= 2; + return freq; +} + +static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq) +{ + unsigned i, div = 0, mul = 0, diff = 1 << 30; + unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; + + /* PLL output max 240 MHz (or 180 MHz per errata) */ + if (out_freq > 240000000) + goto fail; + + for (i = 1; i < 256; i++) { + int diff1; + unsigned input, mul1; + + /* + * PLL input between 1MHz and 32MHz per spec, but lower + * frequences seem necessary in some cases so allow 100K. + */ + input = main_freq / i; + if (input < 100000) + continue; + if (input > 32000000) + continue; + + mul1 = out_freq / input; + if (mul1 > 2048) + continue; + if (mul1 < 2) + goto fail; + + diff1 = out_freq - input * mul1; + if (diff1 < 0) + diff1 = -diff1; + if (diff > diff1) { + diff = diff1; + div = i; + mul = mul1; + if (diff == 0) + break; + } + } + if (i == 256 && diff > (out_freq >> 5)) + goto fail; + return ret | ((mul - 1) << 16) | div; +fail: + return 0; +} + +int __init at91_clock_init(unsigned long main_clock) +{ + unsigned tmp, freq, mckr; + + spin_lock_init(&clk_lock); + + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = at91_sys_read(AT91_CKGR_MCFR); + } while (!(tmp & 0x10000)); + main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16); + } + main_clk.rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); + if (plla.rate_hz > 209000000) + pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); + + /* + * USB clock init: choose 48 MHz PLLB value, turn all clocks off, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000; + pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); + at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP)); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP); + at91_sys_write(AT91_CKGR_PLLBR, 0); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP); + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = at91_sys_read(AT91_PMC_MCKR); + mck.parent = clock_list[mckr & AT91_PMC_CSS]; + mck.parent->users++; + freq = mck.parent->rate_hz; + freq /= (1 << ((mckr >> 2) & 3)); /* prescale */ + mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */ + + printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n", + freq / 1000000, (unsigned) mck.rate_hz / 1000000, + (unsigned) main_clock / 1000000, + ((unsigned) main_clock % 1000000) / 1000); + + /* FIXME get rid of master_clock global */ + at91_master_clock = mck.rate_hz; + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + /* establish PCK0..PCK3 parentage */ + for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) { + struct clk *clk = clock_list[tmp], *parent; + u32 pckr; + + if (!clk->programmable) + continue; + + pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); + parent = clock_list[pckr & 3]; + clk->parent = parent; + clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); + } +#else + /* disable unused clocks */ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3); +#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ + + /* FIXME several unused clocks may still be active... provide + * a CONFIG option to turn off all unused clocks at some point + * before driver init starts. + */ + + return 0; +} diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/common.c new file mode 100644 index 00000000000..3848fd2d559 --- /dev/null +++ b/arch/arm/mach-at91rm9200/common.c @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-at91rm9200/common.c + * + * Copyright (C) 2005 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/hardware.h> + +static struct map_desc at91rm9200_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SPI, + .pfn = __phys_to_pfn(AT91_BASE_SPI), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SSC2, + .pfn = __phys_to_pfn(AT91_BASE_SSC2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SSC1, + .pfn = __phys_to_pfn(AT91_BASE_SSC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_SSC0, + .pfn = __phys_to_pfn(AT91_BASE_SSC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US3, + .pfn = __phys_to_pfn(AT91_BASE_US3), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US2, + .pfn = __phys_to_pfn(AT91_BASE_US2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US1, + .pfn = __phys_to_pfn(AT91_BASE_US1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_US0, + .pfn = __phys_to_pfn(AT91_BASE_US0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_EMAC, + .pfn = __phys_to_pfn(AT91_BASE_EMAC), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_TWI, + .pfn = __phys_to_pfn(AT91_BASE_TWI), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_MCI, + .pfn = __phys_to_pfn(AT91_BASE_MCI), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_UDP, + .pfn = __phys_to_pfn(AT91_BASE_UDP), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_TCB1, + .pfn = __phys_to_pfn(AT91_BASE_TCB1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_VA_BASE_TCB0, + .pfn = __phys_to_pfn(AT91_BASE_TCB0), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +void __init at91rm9200_map_io(void) +{ + iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} + + +unsigned long at91_master_clock; + +EXPORT_SYMBOL(at91_master_clock); + + +int at91_serial_map[AT91_NR_UART]; +int at91_console_port; + +EXPORT_SYMBOL(at91_serial_map); +EXPORT_SYMBOL(at91_console_port); diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c new file mode 100644 index 00000000000..8df3e524565 --- /dev/null +++ b/arch/arm/mach-at91rm9200/devices.c @@ -0,0 +1,291 @@ +/* + * arch/arm/mach-at91rm9200/devices.c + * + * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/config.h> +#include <linux/platform_device.h> + +#include <asm/arch/board.h> +#include <asm/arch/pio.h> + + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = 0xffffffffUL; +static struct at91_usbh_data usbh_data; + +static struct resource at91rm9200_usbh_resource[] = { + [0] = { + .start = AT91_UHP_BASE, + .end = AT91_UHP_BASE + SZ_1M -1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_UHP, + .end = AT91_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_usbh_device = { + .name = "at91rm9200-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbh_data, + }, + .resource = at91rm9200_usbh_resource, + .num_resources = ARRAY_SIZE(at91rm9200_usbh_resource), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + if (!data) + return; + + usbh_data = *data; + platform_device_register(&at91rm9200_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * USB Device (Gadget) + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_GADGET_AT91 +static struct at91_udc_data udc_data; + +static struct resource at91_udc_resources[] = { + { + .start = AT91_BASE_UDP, + .end = AT91_BASE_UDP + SZ_16K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91rm9200_udc_device = { + .name = "at91_udc", + .id = -1, + .dev = { + .platform_data = &udc_data, + }, + .resource = at91_udc_resources, + .num_resources = ARRAY_SIZE(at91_udc_resources), +}; + +void __init at91_add_device_udc(struct at91_udc_data *data) +{ + if (!data) + return; + + if (data->vbus_pin) { + at91_set_gpio_input(data->vbus_pin, 0); + at91_set_deglitch(data->vbus_pin, 1); + } + if (data->pullup_pin) + at91_set_gpio_output(data->pullup_pin, 0); + + udc_data = *data; + platform_device_register(&at91rm9200_udc_device); +} +#else +void __init at91_add_device_udc(struct at91_udc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) +static u64 eth_dmamask = 0xffffffffUL; +static struct at91_eth_data eth_data; + +static struct platform_device at91rm9200_eth_device = { + .name = "at91_ether", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = ð_data, + }, + .num_resources = 0, +}; + +void __init at91_add_device_eth(struct at91_eth_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */ + at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */ + + if (!data->is_rmii) { + at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */ + at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */ + at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */ + } + + eth_data = *data; + platform_device_register(&at91rm9200_eth_device); +} +#else +void __init at91_add_device_eth(struct at91_eth_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Compact Flash / PCMCIA + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) +static struct at91_cf_data cf_data; + +static struct platform_device at91rm9200_cf_device = { + .name = "at91_cf", + .id = -1, + .dev = { + .platform_data = &cf_data, + }, + .num_resources = 0, +}; + +void __init at91_add_device_cf(struct at91_cf_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->irq_pin) { + at91_set_gpio_input(data->irq_pin, 1); + at91_set_deglitch(data->irq_pin, 1); + } + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + + /* outputs, initially off */ + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + at91_set_gpio_output(data->rst_pin, 0); + + cf_data = *data; + platform_device_register(&at91rm9200_cf_device); +} +#else +void __init at91_add_device_cf(struct at91_cf_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE) +static u64 mmc_dmamask = 0xffffffffUL; +static struct at91_mmc_data mmc_data; + +static struct resource at91_mmc_resources[] = { + { + .start = AT91_BASE_MCI, + .end = AT91_BASE_MCI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91rm9200_mmc_device = { + .name = "at91rm9200_mci", + .id = -1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &mmc_data, + }, + .resource = at91_mmc_resources, + .num_resources = ARRAY_SIZE(at91_mmc_resources), +}; + +void __init at91_add_device_mmc(struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA27, 0); + + if (data->is_b) { + /* CMD */ + at91_set_B_periph(AT91_PIN_PA8, 0); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA9, 0); + if (data->wire4) { + at91_set_B_periph(AT91_PIN_PA10, 0); + at91_set_B_periph(AT91_PIN_PA11, 0); + at91_set_B_periph(AT91_PIN_PA12, 0); + } + } else { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA28, 0); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA29, 0); + if (data->wire4) { + at91_set_B_periph(AT91_PIN_PB3, 0); + at91_set_B_periph(AT91_PIN_PB4, 0); + at91_set_B_periph(AT91_PIN_PB5, 0); + } + } + + mmc_data = *data; + platform_device_register(&at91rm9200_mmc_device); +} +#else +void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +#endif + +/* -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h new file mode 100644 index 00000000000..9bd541eba0a --- /dev/null +++ b/arch/arm/mach-at91rm9200/generic.h @@ -0,0 +1,18 @@ +/* + * linux/arch/arm/mach-at91rm9200/generic.h + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +void at91_gpio_irq_setup(unsigned banks); + +struct sys_timer; +extern struct sys_timer at91rm9200_timer; + +extern void __init at91rm9200_map_io(void); + +extern int __init at91_clock_init(unsigned long main_clock); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c new file mode 100644 index 00000000000..2fd2ef583e4 --- /dev/null +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -0,0 +1,302 @@ +/* + * linux/arch/arm/mach-at91rm9200/gpio.c + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/mach/irq.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> + +static const u32 pio_controller_offset[4] = { + AT91_PIOA, + AT91_PIOB, + AT91_PIOC, + AT91_PIOD, +}; + +static inline void __iomem *pin_to_controller(unsigned pin) +{ + void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS; + + pin -= PIN_BASE; + pin /= 32; + if (likely(pin < BGA_GPIO_BANKS)) + return sys_base + pio_controller_offset[pin]; + + return NULL; +} + +static inline unsigned pin_to_mask(unsigned pin) +{ + pin -= PIN_BASE; + return 1 << (pin % 32); +} + + +/*--------------------------------------------------------------------------*/ + +/* Not all hardware capabilities are exposed through these calls; they + * only encapsulate the most common features and modes. (So if you + * want to change signals in groups, do it directly.) + * + * Bootloaders will usually handle some of the pin multiplexing setup. + * The intent is certainly that by the time Linux is fully booted, all + * pins should have been fully initialized. These setup calls should + * only be used by board setup routines, or possibly in driver probe(). + * + * For bootloaders doing all that setup, these calls could be inlined + * as NOPs so Linux won't duplicate any setup code + */ + + +/* + * mux the pin to the "A" internal peripheral role. + */ +int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ASR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_A_periph); + + +/* + * mux the pin to the "B" internal peripheral role. + */ +int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_BSR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_B_periph); + + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and + * configure it for an input. + */ +int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_input); + + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), + * and configure it for an output. + */ +int __init_or_module at91_set_gpio_output(unsigned pin, int value) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_output); + + +/* + * enable/disable the glitch filter; mostly used with IRQ handling. + */ +int __init_or_module at91_set_deglitch(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_deglitch); + +/*--------------------------------------------------------------------------*/ + + +/* + * assuming the pin is muxed as a gpio output, set its value. + */ +int at91_set_gpio_value(unsigned pin, int value) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_value); + + +/* + * read the pin's value (works even if it's not muxed as a gpio). + */ +int at91_get_gpio_value(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + u32 pdsr; + + if (!pio) + return -EINVAL; + pdsr = __raw_readl(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} +EXPORT_SYMBOL(at91_get_gpio_value); + +/*--------------------------------------------------------------------------*/ + + +/* Several AIC controller irqs are dispatched through this GPIO handler. + * To use any AT91_PIN_* as an externally triggered IRQ, first call + * at91_set_gpio_input() then maybe enable its glitch filter. + * Then just request_irq() with the pin ID; it works like any ARM IRQ + * handler, though it always triggers on rising and falling edges. + * + * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after + * configuring them with at91_set_a_periph() or at91_set_b_periph(). + * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering. + */ + +static void gpio_irq_mask(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (pio) + __raw_writel(mask, pio + PIO_IDR); +} + +static void gpio_irq_unmask(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (pio) + __raw_writel(mask, pio + PIO_IER); +} + +static int gpio_irq_type(unsigned pin, unsigned type) +{ + return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL; +} + +static struct irqchip gpio_irqchip = { + .mask = gpio_irq_mask, + .unmask = gpio_irq_unmask, + .set_type = gpio_irq_type, +}; + +static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs *regs) +{ + unsigned pin; + struct irqdesc *gpio; + void __iomem *pio; + u32 isr; + + pio = (void __force __iomem *) desc->chipdata; + + /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->ack(irq); + for (;;) { + isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); + if (!isr) + break; + + pin = (unsigned) desc->data; + gpio = &irq_desc[pin]; + + while (isr) { + if (isr & 1) + gpio->handle(pin, gpio, regs); + pin++; + gpio++; + isr >>= 1; + } + } + desc->chip->unmask(irq); + /* now it may re-trigger */ +} + +/* call this from board-specific init_irq */ +void __init at91_gpio_irq_setup(unsigned banks) +{ + unsigned pioc, pin, id; + + if (banks > 4) + banks = 4; + for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA; + pioc < banks; + pioc++, id++) { + void __iomem *controller; + unsigned i; + + controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc]; + __raw_writel(~0, controller + PIO_IDR); + + set_irq_data(id, (void *) pin); + set_irq_chipdata(id, (void __force *) controller); + + for (i = 0; i < 32; i++, pin++) { + set_irq_chip(pin, &gpio_irqchip); + set_irq_handler(pin, do_simple_IRQ); + set_irq_flags(pin, IRQF_VALID); + } + + set_irq_chained_handler(id, gpio_irq_handler); + + /* enable the PIO peripheral clock */ + at91_sys_write(AT91_PMC_PCER, 1 << id); + } + pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks); +} diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c new file mode 100644 index 00000000000..cb62bc83a1d --- /dev/null +++ b/arch/arm/mach-at91rm9200/irq.c @@ -0,0 +1,170 @@ +/* + * linux/arch/arm/mach-at91rm9200/irq.c + * + * Copyright (C) 2004 SAN People + * Copyright (C) 2004 ATMEL + * Copyright (C) Rick Bronson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/types.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/setup.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> + +#include "generic.h" + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripheral */ + 0, /* Parallel IO Controller A */ + 0, /* Parallel IO Controller B */ + 0, /* Parallel IO Controller C */ + 0, /* Parallel IO Controller D */ + 6, /* USART 0 */ + 6, /* USART 1 */ + 6, /* USART 2 */ + 6, /* USART 3 */ + 0, /* Multimedia Card Interface */ + 4, /* USB Device Port */ + 0, /* Two-Wire Interface */ + 6, /* Serial Peripheral Interface */ + 5, /* Serial Synchronous Controller */ + 5, /* Serial Synchronous Controller */ + 5, /* Serial Synchronous Controller */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ + 3, /* USB Host port */ + 3, /* Ethernet MAC */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0, /* Advanced Interrupt Controller */ + 0 /* Advanced Interrupt Controller */ +}; + + +static void at91rm9200_mask_irq(unsigned int irq) +{ + /* Disable interrupt on AIC */ + at91_sys_write(AT91_AIC_IDCR, 1 << irq); +} + +static void at91rm9200_unmask_irq(unsigned int irq) +{ + /* Enable interrupt on AIC */ + at91_sys_write(AT91_AIC_IECR, 1 << irq); +} + +static int at91rm9200_irq_type(unsigned irq, unsigned type) +{ + unsigned int smr, srctype; + + /* change triggering only for FIQ and external IRQ0..IRQ6 */ + if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ)) + return -EINVAL; + + switch (type) { + case IRQT_HIGH: + srctype = AT91_AIC_SRCTYPE_HIGH; + break; + case IRQT_RISING: + srctype = AT91_AIC_SRCTYPE_RISING; + break; + case IRQT_LOW: + srctype = AT91_AIC_SRCTYPE_LOW; + break; + case IRQT_FALLING: + srctype = AT91_AIC_SRCTYPE_FALLING; + break; + default: + return -EINVAL; + } + + smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE; + at91_sys_write(AT91_AIC_SMR(irq), smr | srctype); + return 0; +} + +static struct irqchip at91rm9200_irq_chip = { + .ack = at91rm9200_mask_irq, + .mask = at91rm9200_mask_irq, + .unmask = at91rm9200_unmask_irq, + .set_type = at91rm9200_irq_type, +}; + +/* + * Initialize the AIC interrupt controller. + */ +void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) +{ + unsigned int i; + + /* No priority list specified for this board -> use defaults */ + if (priority == NULL) + priority = at91rm9200_default_irq_priority; + + /* + * The IVR is used by macro get_irqnr_and_base to read and verify. + * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. + */ + for (i = 0; i < NR_AIC_IRQS; i++) { + /* Put irq number in Source Vector Register: */ + at91_sys_write(AT91_AIC_SVR(i), i); + /* Store the Source Mode Register as defined in table above */ + at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); + + set_irq_chip(i, &at91rm9200_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + + /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ + if (i < 8) + at91_sys_write(AT91_AIC_EOICR, 0); + } + + /* + * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS + * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU + */ + at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_sys_write(AT91_AIC_DCR, 0); + + /* Disable and clear all interrupts initially */ + at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF); + at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF); +} diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c new file mode 100644 index 00000000000..1b6dd2deeb2 --- /dev/null +++ b/arch/arm/mach-at91rm9200/time.c @@ -0,0 +1,127 @@ +/* + * linux/arch/arm/mach-at91rm9200/time.c + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/time.h> + +/* + * The ST_CRTR is updated asynchronously to the master clock. It is therefore + * necessary to read it twice (with the same value) to ensure accuracy. + */ +static inline unsigned long read_CRTR(void) { + unsigned long x1, x2; + + do { + x1 = at91_sys_read(AT91_ST_CRTR); + x2 = at91_sys_read(AT91_ST_CRTR); + } while (x1 != x2); + + return x1; +} + +/* + * Returns number of microseconds since last timer interrupt. Note that interrupts + * will have been disabled by do_gettimeofday() + * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. + * 'tick' is usecs per jiffy (linux/timex.h). + */ +static unsigned long at91rm9200_gettimeoffset(void) +{ + unsigned long elapsed; + + elapsed = (read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV; + + return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; +} + +/* + * IRQ handler for the timer. + */ +static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long rtar; + + if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */ + write_seqlock(&xtime_lock); + + do { + timer_tick(regs); + rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV; + at91_sys_write(AT91_ST_RTAR, rtar); + } while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; + } + else + return IRQ_NONE; /* not handled */ +} + +static struct irqaction at91rm9200_timer_irq = { + .name = "at91_tick", + .flags = SA_SHIRQ | SA_INTERRUPT, + .handler = at91rm9200_timer_interrupt +}; + +/* + * Set up timer interrupt. + */ +void __init at91rm9200_timer_init(void) +{ + /* Disable all timer interrupts */ + at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); + (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */ + + /* + * Make IRQs happen for the system timer. + */ + setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + + /* Set initial alarm to 0 */ + at91_sys_write(AT91_ST_RTAR, 0); + + /* Real time counter incremented every 30.51758 microseconds */ + at91_sys_write(AT91_ST_RTMR, 1); + + /* Set Period Interval timer */ + at91_sys_write(AT91_ST_PIMR, LATCH); + + /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */ + tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE; + + /* Enable Period Interval Timer interrupt */ + at91_sys_write(AT91_ST_IER, AT91_ST_PITS); +} + +struct sys_timer at91rm9200_timer = { + .init = at91rm9200_timer_init, + .offset = at91rm9200_gettimeoffset, +}; diff --git a/arch/arm/mach-epxa10db/Kconfig b/arch/arm/mach-epxa10db/Kconfig deleted file mode 100644 index 55d896dd495..00000000000 --- a/arch/arm/mach-epxa10db/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if ARCH_CAMELOT - -menu "Epxa10db" - -comment "PLD hotswap support" - -config PLD - bool - default y - -config PLD_HOTSWAP - bool "Support for PLD device hotplugging (experimental)" - depends on EXPERIMENTAL - help - This enables support for the dynamic loading and configuration of - compatible drivers when the contents of the PLD are changed. This - is still experimental and requires configuration tools which are - not yet generally available. Say N here. You must enable the kernel - module loader for this feature to work. - -endmenu - -endif diff --git a/arch/arm/mach-epxa10db/Makefile b/arch/arm/mach-epxa10db/Makefile deleted file mode 100644 index 24fbd7d3a3c..00000000000 --- a/arch/arm/mach-epxa10db/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := arch.o irq.o mm.o time.o -obj-m := -obj-n := -obj- := - diff --git a/arch/arm/mach-epxa10db/Makefile.boot b/arch/arm/mach-epxa10db/Makefile.boot deleted file mode 100644 index 28bec7d3fc8..00000000000 --- a/arch/arm/mach-epxa10db/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x00008000 - diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c deleted file mode 100644 index 44c56571d18..00000000000 --- a/arch/arm/mach-epxa10db/arch.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/arch.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_8250.h> - -#include <asm/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -static struct plat_serial8250_port serial_platform_data[] = { - { - .iobase = 0x3f8, - .irq = IRQ_UARTINT0, -#error FIXME - .uartclk = 0, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .iobase = 0x2f8, - .irq = IRQ_UARTINT1, -#error FIXME - .uartclk = 0, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -extern void epxa10db_map_io(void); -extern void epxa10db_init_irq(void); -extern struct sys_timer epxa10db_timer; - -MACHINE_START(CAMELOT, "Altera Epxa10db") - /* Maintainer: Altera Corporation */ - .phys_ram = 0x00000000, - .phys_io = 0x7fffc000, - .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, - .map_io = epxa10db_map_io, - .init_irq = epxa10db_init_irq, - .timer = &epxa10db_timer, -MACHINE_END - diff --git a/arch/arm/mach-epxa10db/irq.c b/arch/arm/mach-epxa10db/irq.c deleted file mode 100644 index 9bf927e1330..00000000000 --- a/arch/arm/mach-epxa10db/irq.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/irq.c - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/stddef.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <asm/io.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach/irq.h> -#include <asm/arch/platform.h> -#include <asm/arch/int_ctrl00.h> - - -static void epxa_mask_irq(unsigned int irq) -{ - writel(1 << irq, INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE))); -} - -static void epxa_unmask_irq(unsigned int irq) -{ - writel(1 << irq, INT_MS(IO_ADDRESS(EXC_INT_CTRL00_BASE))); -} - - -static struct irqchip epxa_irq_chip = { - .ack = epxa_mask_irq, - .mask = epxa_mask_irq, - .unmask = epxa_unmask_irq, -}; - -static struct resource irq_resource = { - .name = "irq_handler", - .start = IO_ADDRESS(EXC_INT_CTRL00_BASE), - .end = IO_ADDRESS(INT_PRIORITY_FC(EXC_INT_CTRL00_BASE))+4, -}; - -void __init epxa10db_init_irq(void) -{ - unsigned int i; - - request_resource(&iomem_resource, &irq_resource); - - /* - * This bit sets up the interrupt controller using - * the 6 PLD interrupts mode (the default) each - * irqs is assigned a priority which is the same - * as its interrupt number. This scheme is used because - * its easy, but you may want to change it depending - * on the contents of your PLD - */ - - writel(3,INT_MODE(IO_ADDRESS(EXC_INT_CTRL00_BASE))); - for (i = 0; i < NR_IRQS; i++){ - writel(i+1, INT_PRIORITY_P0(IO_ADDRESS(EXC_INT_CTRL00_BASE)) + (4*i)); - set_irq_chip(i,&epxa_irq_chip); - set_irq_handler(i,do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - - /* Disable all interrupts */ - writel(-1,INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE))); - -} diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c deleted file mode 100644 index cfd0d2182d4..00000000000 --- a/arch/arm/mach-epxa10db/mm.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/mm.c - * - * MM routines for Altera'a Epxa10db board - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/sizes.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - -/* Page table mapping for I/O region */ - -static struct map_desc epxa10db_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(EXC_REGISTERS_BASE), - .pfn = __phys_to_pfn(EXC_REGISTERS_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE), - .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE), - .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE), - .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE), - .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, { - .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE), - .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE), - .length = SZ_16M, - .type = MT_DEVICE - } -}; - -void __init epxa10db_map_io(void) -{ - iotable_init(epxa10db_io_desc, ARRAY_SIZE(epxa10db_io_desc)); -} diff --git a/arch/arm/mach-epxa10db/time.c b/arch/arm/mach-epxa10db/time.c deleted file mode 100644 index 4b1084dde8d..00000000000 --- a/arch/arm/mach-epxa10db/time.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/time.c - * - * Copyright (C) 2000 Deep Blue Solutions - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/sched.h> - -#include <asm/hardware.h> -#include <asm/system.h> -#include <asm/leds.h> - -#include <asm/mach/time.h> - -#define TIMER00_TYPE (volatile unsigned int*) -#include <asm/arch/timer00.h> - -static int epxa10db_set_rtc(void) -{ - return 1; -} - -static int epxa10db_rtc_init(void) -{ - set_rtc = epxa10db_set_rtc; - - return 0; -} - -__initcall(epxa10db_rtc_init); - - -/* - * IRQ handler for the timer - */ -static irqreturn_t -epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - write_seqlock(&xtime_lock); - - // ...clear the interrupt - *TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))|=TIMER0_CR_CI_MSK; - - timer_tick(regs); - write_sequnlock(&xtime_lock); - - return IRQ_HANDLED; -} - -static struct irqaction epxa10db_timer_irq = { - .name = "Excalibur Timer Tick", - .flags = SA_INTERRUPT | SA_TIMER, - .handler = epxa10db_timer_interrupt, -}; - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -static void __init epxa10db_timer_init(void) -{ - /* Start the timer */ - *TIMER0_LIMIT(IO_ADDRESS(EXC_TIMER00_BASE))=(unsigned int)(EXC_AHB2_CLK_FREQUENCY/200); - *TIMER0_PRESCALE(IO_ADDRESS(EXC_TIMER00_BASE))=1; - *TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))=TIMER0_CR_IE_MSK | TIMER0_CR_S_MSK; - - setup_irq(IRQ_TIMER0, &epxa10db_timer_irq); -} - -struct sys_timer epxa10db_timer = { - .init = epxa10db_timer_init, -}; diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 5830ae3ddd1..fc09ba92d66 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -253,100 +253,101 @@ struct clk s3c24xx_uclk = { /* clock definitions */ static struct clk init_clocks[] = { - { .name = "nand", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND - }, - { .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC - }, - { .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH - }, - { .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD - }, - { .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT - }, - { .name = "sdi", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI - }, - { .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0 - }, - { .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1 - }, - { .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2 - }, - { .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO - }, - { .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC - }, - { .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC - }, - { .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC - }, - { .name = "iis", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS - }, - { .name = "spi", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI - }, - { .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = 0 + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_NAND, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SDI, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIS, + }, { + .name = "spi", + .id = -1, + .parent = &clk_p, + .enable = s3c24xx_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SPI, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = 0, } }; @@ -390,16 +391,15 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, clk_p.rate = pclk; clk_f.rate = fclk; - /* it looks like just setting the register here is not good - * enough, and causes the odd hang at initial boot time, so - * do all of them indivdually. + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. * - * I think disabling the LCD clock if the LCD is active is - * very dangerous, and therefore the bootloader should be - * careful to not enable the LCD clock if it is not needed. - * - * and of course, this looks neater - */ + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e84fdde6edf..3b79d0e2345 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,8 +62,8 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 - default y if ARCH_S3C2410 + depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 + default y if ARCH_S3C2410 || ARCH_AT91RM9200 select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -83,8 +83,8 @@ config CPU_ARM920T # ARM922T config CPU_ARM922T bool "Support ARM922T processor" if ARCH_INTEGRATOR - depends on ARCH_CAMELOT || ARCH_LH7A40X || ARCH_INTEGRATOR - default y if ARCH_CAMELOT || ARCH_LH7A40X + depends on ARCH_LH7A40X || ARCH_INTEGRATOR + default y if ARCH_LH7A40X select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 10901398e4a..de3ce1eec2e 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -86,11 +86,12 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, } static int -remap_area_pages(unsigned long start, unsigned long phys_addr, +remap_area_pages(unsigned long start, unsigned long pfn, unsigned long size, unsigned long flags) { unsigned long address = start; unsigned long end = start + size; + unsigned long phys_addr = __pfn_to_phys(pfn); int err = 0; pgd_t * dir; @@ -130,36 +131,44 @@ remap_area_pages(unsigned long start, unsigned long phys_addr, * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. */ void __iomem * +__ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, + unsigned long flags) +{ + unsigned long addr; + struct vm_struct * area; + + area = get_vm_area(size, VM_IOREMAP); + if (!area) + return NULL; + addr = (unsigned long)area->addr; + if (remap_area_pages(addr, pfn, size, flags)) { + vfree(addr); + return NULL; + } + return (void __iomem *) (offset + (char *)addr); +} +EXPORT_SYMBOL(__ioremap_pfn); + +void __iomem * __ioremap(unsigned long phys_addr, size_t size, unsigned long flags) { - void * addr; - struct vm_struct * area; - unsigned long offset, last_addr; + unsigned long last_addr; + unsigned long offset = phys_addr & ~PAGE_MASK; + unsigned long pfn = __phys_to_pfn(phys_addr); - /* Don't allow wraparound or zero size */ + /* + * Don't allow wraparound or zero size + */ last_addr = phys_addr + size - 1; if (!size || last_addr < phys_addr) return NULL; /* - * Mappings have to be page-aligned + * Page align the mapping size */ - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; size = PAGE_ALIGN(last_addr + 1) - phys_addr; - /* - * Ok, go for it.. - */ - area = get_vm_area(size, VM_IOREMAP); - if (!area) - return NULL; - addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { - vfree(addr); - return NULL; - } - return (void __iomem *) (offset + (char *)addr); + return __ioremap_pfn(pfn, offset, size, flags); } EXPORT_SYMBOL(__ioremap); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 465487470d0..d0f9bb5e902 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Nov 25 14:43:04 2005 +# Last update: Mon Jan 9 12:56:42 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -910,3 +910,31 @@ mbus MACH_MBUS MBUS 896 nadia2vb MACH_NADIA2VB NADIA2VB 897 r1000 MACH_R1000 R1000 898 hw90250 MACH_HW90250 HW90250 899 +omap_2430sdp MACH_OMAP_2430SDP OMAP_2430SDP 900 +davinci_evm MACH_DAVINCI_EVM DAVINCI_EVM 901 +omap_tornado MACH_OMAP_TORNADO OMAP_TORNADO 902 +olocreek MACH_OLOCREEK OLOCREEK 903 +palmz72 MACH_PALMZ72 PALMZ72 904 +nxdb500 MACH_NXDB500 NXDB500 905 +apf9328 MACH_APF9328 APF9328 906 +omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 +omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 +xscale_treo650 MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650 909 +acumen MACH_ACUMEN ACUMEN 910 +xp100 MACH_XP100 XP100 911 +fs2410 MACH_FS2410 FS2410 912 +pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913 +sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914 +bsemserver MACH_BSEMSERVER BSEMSERVER 915 +netclient MACH_NETCLIENT NETCLIENT 916 +xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917 +xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918 +omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 +argonlvevb MACH_ARGONLVEVB ARGONLVEVB 920 +rea_2d MACH_REA_2D REA_2D 921 +eti3e524 MACH_TI3E524 TI3E524 922 +ateb9200 MACH_ATEB9200 ATEB9200 923 +auckland MACH_AUCKLAND AUCKLAND 924 +ak3220m MACH_AK3320M AK3320M 925 +duramax MACH_DURAMAX DURAMAX 926 +n35 MACH_N35 N35 927 diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 1bbdd1693d5..889855d8d9f 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -15,7 +15,6 @@ #include <linux/amba/bus.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/sizes.h> #define to_amba_device(d) container_of(d, struct amba_device, dev) diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 3f0df3330fb..ebd9976fc81 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -20,7 +20,6 @@ #include <linux/spinlock.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/system.h> #include <asm/hardware/sa1111.h> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index b9b77cf39a1..7abd7fee0dd 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -473,14 +473,6 @@ config MTD_IXP2000 IXDP425 and Coyote. If you have an IXP2000 based board and would like to use the flash chips on it, say 'Y'. -config MTD_EPXA10DB - tristate "CFI Flash device mapped on Epxa10db" - depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT - help - This enables support for the flash devices on the Altera - Excalibur XA10 Development Board. If you are building a kernel - for on of these boards then you should say 'Y' otherwise say 'N'. - config MTD_FORTUNET tristate "CFI Flash device mapped on the FortuNet board" depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 2f7e254912f..ab71f172eb7 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o -obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o obj-$(CONFIG_MTD_IQ80310) += iq80310.o obj-$(CONFIG_MTD_L440GX) += l440gx.o obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o diff --git a/drivers/mtd/maps/epxa10db-flash.c b/drivers/mtd/maps/epxa10db-flash.c deleted file mode 100644 index 265b079fe93..00000000000 --- a/drivers/mtd/maps/epxa10db-flash.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Flash memory access on EPXA based devices - * - * (C) 2000 Nicolas Pitre <nico@cam.org> - * Copyright (C) 2001 Altera Corporation - * Copyright (C) 2001 Red Hat, Inc. - * - * $Id: epxa10db-flash.c,v 1.15 2005/11/07 11:14:27 gleixner Exp $ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <asm/hardware.h> - -#ifdef CONFIG_EPXA10DB -#define BOARD_NAME "EPXA10DB" -#else -#define BOARD_NAME "EPXA1DB" -#endif - -static int nr_parts = 0; -static struct mtd_partition *parts; - -static struct mtd_info *mymtd; - -static int epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts); - - -static struct map_info epxa_map = { - .name = "EPXA flash", - .size = FLASH_SIZE, - .bankwidth = 2, - .phys = FLASH_START, -}; - -static const char *probes[] = { "RedBoot", "afs", NULL }; - -static int __init epxa_mtd_init(void) -{ - int i; - - printk(KERN_NOTICE "%s flash device: 0x%x at 0x%x\n", BOARD_NAME, FLASH_SIZE, FLASH_START); - - epxa_map.virt = ioremap(FLASH_START, FLASH_SIZE); - if (!epxa_map.virt) { - printk("Failed to ioremap %s flash\n",BOARD_NAME); - return -EIO; - } - simple_map_init(&epxa_map); - - mymtd = do_map_probe("cfi_probe", &epxa_map); - if (!mymtd) { - iounmap((void *)epxa_map.virt); - return -ENXIO; - } - - mymtd->owner = THIS_MODULE; - - /* Unlock the flash device. */ - if(mymtd->unlock){ - for (i=0; i<mymtd->numeraseregions;i++){ - int j; - for(j=0;j<mymtd->eraseregions[i].numblocks;j++){ - mymtd->unlock(mymtd,mymtd->eraseregions[i].offset + j * mymtd->eraseregions[i].erasesize,mymtd->eraseregions[i].erasesize); - } - } - } - -#ifdef CONFIG_MTD_PARTITIONS - nr_parts = parse_mtd_partitions(mymtd, probes, &parts, 0); - - if (nr_parts > 0) { - add_mtd_partitions(mymtd, parts, nr_parts); - return 0; - } -#endif - /* No recognised partitioning schemes found - use defaults */ - nr_parts = epxa_default_partitions(mymtd, &parts); - if (nr_parts > 0) { - add_mtd_partitions(mymtd, parts, nr_parts); - return 0; - } - - /* If all else fails... */ - add_mtd_device(mymtd); - return 0; -} - -static void __exit epxa_mtd_cleanup(void) -{ - if (mymtd) { - if (nr_parts) - del_mtd_partitions(mymtd); - else - del_mtd_device(mymtd); - map_destroy(mymtd); - } - if (epxa_map.virt) { - iounmap((void *)epxa_map.virt); - epxa_map.virt = 0; - } -} - - -/* - * This will do for now, once we decide which bootldr we're finally - * going to use then we'll remove this function and do it properly - * - * Partions are currently (as offsets from base of flash): - * 0x00000000 - 0x003FFFFF - bootloader (!) - * 0x00400000 - 0x00FFFFFF - Flashdisk - */ - -static int __init epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts) -{ - struct mtd_partition *parts; - int ret, i; - int npartitions = 0; - char *names; - const char *name = "jffs"; - - printk("Using default partitions for %s\n",BOARD_NAME); - npartitions=1; - parts = kmalloc(npartitions*sizeof(*parts)+strlen(name), GFP_KERNEL); - memzero(parts,npartitions*sizeof(*parts)+strlen(name)); - if (!parts) { - ret = -ENOMEM; - goto out; - } - i=0; - names = (char *)&parts[npartitions]; - parts[i].name = names; - names += strlen(name) + 1; - strcpy(parts[i].name, name); - -#ifdef CONFIG_EPXA10DB - parts[i].size = FLASH_SIZE-0x00400000; - parts[i].offset = 0x00400000; -#else - parts[i].size = FLASH_SIZE-0x00180000; - parts[i].offset = 0x00180000; -#endif - - out: - *pparts = parts; - return npartitions; -} - - -module_init(epxa_mtd_init); -module_exit(epxa_mtd_cleanup); - -MODULE_AUTHOR("Clive Davies"); -MODULE_DESCRIPTION("Altera epxa mtd flash map"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index 470364deded..625184b65e3 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -31,16 +31,3 @@ config ARM_ETHERH help If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. - -config ARM_ETHER00 - tristate "Altera Ether00 support" - depends on NET_ETHERNET && ARM && ARCH_CAMELOT - help - This is the driver for Altera's ether00 ethernet mac IP core. Say - Y here if you want to build support for this into the kernel. It - is also available as a module (say M here) that can be inserted/ - removed from the kernel at the same time as the PLD is configured. - If this driver is running on an epxa10 development board then it - will generate a suitable hw address based on the board serial - number (MTD support is required for this). Otherwise you will - need to set a suitable hw address using ifconfig. diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile index b0d706834d8..bc263edf06a 100644 --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile @@ -4,7 +4,6 @@ # obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o -obj-$(CONFIG_ARM_ETHER00) += ether00.o obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_ARM_ETHER3) += ether3.o obj-$(CONFIG_ARM_ETHER1) += ether1.o diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 877891a29aa..53e3afc1b7b 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -668,9 +668,8 @@ static void __init am79c961_banner(void) printk(KERN_INFO "%s", version); } -static int __init am79c961_probe(struct device *_dev) +static int __init am79c961_probe(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(_dev); struct resource *res; struct net_device *dev; struct dev_priv *priv; @@ -758,15 +757,16 @@ out: return ret; } -static struct device_driver am79c961_driver = { - .name = "am79c961", - .bus = &platform_bus_type, +static struct platform_driver am79c961_driver = { .probe = am79c961_probe, + .driver = { + .name = "am79c961", + }, }; static int __init am79c961_init(void) { - return driver_register(&am79c961_driver); + return platform_driver_register(&am79c961_driver); } __initcall(am79c961_init); diff --git a/drivers/net/arm/ether00.c b/drivers/net/arm/ether00.c deleted file mode 100644 index 4f1f4e31bda..00000000000 --- a/drivers/net/arm/ether00.c +++ /dev/null @@ -1,1017 +0,0 @@ -/* - * drivers/net/ether00.c - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* includes */ -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/netdevice.h> -#include <linux/skbuff.h> -#include <linux/etherdevice.h> -#include <linux/module.h> -#include <linux/tqueue.h> -#include <linux/mtd/mtd.h> -#include <linux/pld/pld_hotswap.h> -#include <asm/arch/excalibur.h> -#include <asm/arch/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/sizes.h> - -#include <asm/arch/ether00.h> -#include <asm/arch/tdkphy.h> - - -MODULE_AUTHOR("Clive Davies"); -MODULE_DESCRIPTION("Altera Ether00 IP core driver"); -MODULE_LICENSE("GPL"); - -#define PKT_BUF_SZ 1540 /* Size of each rx buffer */ -#define ETH_NR 4 /* Number of MACs this driver supports */ - -#define DEBUG(x) - -#define __dma_va(x) (unsigned int)((unsigned int)priv->dma_data+(((unsigned int)(x))&(EXC_SPSRAM_BLOCK0_SIZE-1))) -#define __dma_pa(x) (unsigned int)(EXC_SPSRAM_BLOCK0_BASE+(((unsigned int)(x))-(unsigned int)priv->dma_data)) - -#define ETHER00_BASE 0 -#define ETHER00_TYPE -#define ETHER00_NAME "ether00" -#define MAC_REG_SIZE 0x400 /* size of MAC register area */ - - - -/* typedefs */ - -/* The definition of the driver control structure */ - -#define RX_NUM_BUFF 10 -#define RX_NUM_FDESC 10 -#define TX_NUM_FDESC 10 - -struct tx_fda_ent{ - FDA_DESC fd; - BUF_DESC bd; - BUF_DESC pad; -}; -struct rx_fda_ent{ - FDA_DESC fd; - BUF_DESC bd; - BUF_DESC pad; -}; -struct rx_blist_ent{ - FDA_DESC fd; - BUF_DESC bd; - BUF_DESC pad; -}; -struct net_priv -{ - struct net_device_stats stats; - struct sk_buff* skb; - void* dma_data; - struct rx_blist_ent* rx_blist_vp; - struct rx_fda_ent* rx_fda_ptr; - struct tx_fda_ent* tx_fdalist_vp; - struct tq_struct tq_memupdate; - unsigned char memupdate_scheduled; - unsigned char rx_disabled; - unsigned char queue_stopped; - spinlock_t rx_lock; -}; - -static const char vendor_id[2]={0x07,0xed}; - -#ifdef ETHER00_DEBUG - -/* Dump (most) registers for debugging puposes */ - -static void dump_regs(struct net_device *dev){ - struct net_priv* priv=dev->priv; - unsigned int* i; - - printk("\n RX free descriptor area:\n"); - - for(i=(unsigned int*)priv->rx_fda_ptr; - i<((unsigned int*)(priv->rx_fda_ptr+RX_NUM_FDESC));){ - printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3)); - i+=4; - } - - printk("\n RX buffer list:\n"); - - for(i=(unsigned int*)priv->rx_blist_vp; - i<((unsigned int*)(priv->rx_blist_vp+RX_NUM_BUFF));){ - printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3)); - i+=4; - } - - printk("\n TX frame descriptor list:\n"); - - for(i=(unsigned int*)priv->tx_fdalist_vp; - i<((unsigned int*)(priv->tx_fdalist_vp+TX_NUM_FDESC));){ - printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3)); - i+=4; - } - - printk("\ndma ctl=%#x\n",readw(ETHER_DMA_CTL(dev->base_addr))); - printk("txfrmptr=%#x\n",readw(ETHER_TXFRMPTR(dev->base_addr))); - printk("txthrsh=%#x\n",readw(ETHER_TXTHRSH(dev->base_addr))); - printk("txpollctr=%#x\n",readw(ETHER_TXPOLLCTR(dev->base_addr))); - printk("blfrmptr=%#x\n",readw(ETHER_BLFRMPTR(dev->base_addr))); - printk("rxfragsize=%#x\n",readw(ETHER_RXFRAGSIZE(dev->base_addr))); - printk("tx_int_en=%#x\n",readw(ETHER_INT_EN(dev->base_addr))); - printk("fda_bas=%#x\n",readw(ETHER_FDA_BAS(dev->base_addr))); - printk("fda_lim=%#x\n",readw(ETHER_FDA_LIM(dev->base_addr))); - printk("int_src=%#x\n",readw(ETHER_INT_SRC(dev->base_addr))); - printk("pausecnt=%#x\n",readw(ETHER_PAUSECNT(dev->base_addr))); - printk("rempaucnt=%#x\n",readw(ETHER_REMPAUCNT(dev->base_addr))); - printk("txconfrmstat=%#x\n",readw(ETHER_TXCONFRMSTAT(dev->base_addr))); - printk("mac_ctl=%#x\n",readw(ETHER_MAC_CTL(dev->base_addr))); - printk("arc_ctl=%#x\n",readw(ETHER_ARC_CTL(dev->base_addr))); - printk("tx_ctl=%#x\n",readw(ETHER_TX_CTL(dev->base_addr))); -} -#endif /* ETHER00_DEBUG */ - - -static int ether00_write_phy(struct net_device *dev, short address, short value) -{ - volatile int count = 1024; - writew(value,ETHER_MD_DATA(dev->base_addr)); - writew( ETHER_MD_CA_BUSY_MSK | - ETHER_MD_CA_WR_MSK | - (address & ETHER_MD_CA_ADDR_MSK), - ETHER_MD_CA(dev->base_addr)); - - /* Wait for the command to complete */ - while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){ - count--; - } - if (!count){ - printk("Write to phy failed, addr=%#x, data=%#x\n",address, value); - return -EIO; - } - return 0; -} - -static int ether00_read_phy(struct net_device *dev, short address) -{ - volatile int count = 1024; - writew( ETHER_MD_CA_BUSY_MSK | - (address & ETHER_MD_CA_ADDR_MSK), - ETHER_MD_CA(dev->base_addr)); - - /* Wait for the command to complete */ - while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){ - count--; - } - if (!count){ - printk(KERN_WARNING "Read from phy timed out\n"); - return -EIO; - } - return readw(ETHER_MD_DATA(dev->base_addr)); -} - -static void ether00_phy_int(int irq_num, void* dev_id, struct pt_regs* regs) -{ - struct net_device* dev=dev_id; - int irq_status; - - irq_status=ether00_read_phy(dev, PHY_IRQ_CONTROL); - - if(irq_status & PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK){ - /* - * Autonegotiation complete on epxa10db. The mac doesn't - * twig if we're in full duplex so we need to check the - * phy status register and configure the mac accordingly - */ - if(ether00_read_phy(dev, PHY_STATUS)&(PHY_STATUS_10T_F_MSK|PHY_STATUS_100_X_F_MSK)){ - int tmp; - tmp=readl(ETHER_MAC_CTL(dev->base_addr)); - writel(tmp|ETHER_MAC_CTL_FULLDUP_MSK,ETHER_MAC_CTL(dev->base_addr)); - } - } - - if(irq_status&PHY_IRQ_CONTROL_LS_CHG_INT_MSK){ - - if(ether00_read_phy(dev, PHY_STATUS)& PHY_STATUS_LINK_MSK){ - /* Link is up */ - netif_carrier_on(dev); - //printk("Carrier on\n"); - }else{ - netif_carrier_off(dev); - //printk("Carrier off\n"); - - } - } - -} - -static void setup_blist_entry(struct sk_buff* skb,struct rx_blist_ent* blist_ent_ptr){ - /* Make the buffer consistent with the cache as the mac is going to write - * directly into it*/ - blist_ent_ptr->fd.FDSystem=(unsigned int)skb; - blist_ent_ptr->bd.BuffData=(char*)__pa(skb->data); - consistent_sync(skb->data,PKT_BUF_SZ,PCI_DMA_FROMDEVICE); - /* align IP on 16 Byte (DMA_CTL set to skip 2 bytes) */ - skb_reserve(skb,2); - blist_ent_ptr->bd.BuffLength=PKT_BUF_SZ-2; - blist_ent_ptr->fd.FDLength=1; - blist_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK; - blist_ent_ptr->bd.BDCtl=BDCTL_COWNSBD_MSK; -} - - -static int ether00_mem_init(struct net_device* dev) -{ - struct net_priv* priv=dev->priv; - struct tx_fda_ent *tx_fd_ptr,*tx_end_ptr; - struct rx_blist_ent* blist_ent_ptr; - int i; - - /* - * Grab a block of on chip SRAM to contain the control stuctures for - * the ethernet MAC. This uncached becuase it needs to be accesses by both - * bus masters (cpu + mac). However, it shouldn't matter too much in terms - * of speed as its on chip memory - */ - priv->dma_data=ioremap_nocache(EXC_SPSRAM_BLOCK0_BASE,EXC_SPSRAM_BLOCK0_SIZE ); - if (!priv->dma_data) - return -ENOMEM; - - priv->rx_fda_ptr=(struct rx_fda_ent*)priv->dma_data; - /* - * Now share it out amongst the Frame descriptors and the buffer list - */ - priv->rx_blist_vp=(struct rx_blist_ent*)((unsigned int)priv->dma_data+RX_NUM_FDESC*sizeof(struct rx_fda_ent)); - - /* - *Initalise the FDA list - */ - /* set ownership to the controller */ - memset(priv->rx_fda_ptr,0x80,RX_NUM_FDESC*sizeof(struct rx_fda_ent)); - - /* - *Initialise the buffer list - */ - blist_ent_ptr=priv->rx_blist_vp; - i=0; - while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){ - struct sk_buff *skb; - blist_ent_ptr->fd.FDLength=1; - skb=dev_alloc_skb(PKT_BUF_SZ); - if(skb){ - setup_blist_entry(skb,blist_ent_ptr); - blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(blist_ent_ptr+1); - blist_ent_ptr->bd.BDStat=i++; - blist_ent_ptr++; - } - else - { - printk("Failed to initalise buffer list\n"); - } - - } - blist_ent_ptr--; - blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->rx_blist_vp); - - priv->tx_fdalist_vp=(struct tx_fda_ent*)(priv->rx_blist_vp+RX_NUM_BUFF); - - /* Initialise the buffers to be a circular list. The mac will then go poll - * the list until it finds a frame ready to transmit */ - tx_end_ptr=priv->tx_fdalist_vp+TX_NUM_FDESC; - for(tx_fd_ptr=priv->tx_fdalist_vp;tx_fd_ptr<tx_end_ptr;tx_fd_ptr++){ - tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa((tx_fd_ptr+1)); - tx_fd_ptr->fd.FDCtl=1; - tx_fd_ptr->fd.FDStat=0; - tx_fd_ptr->fd.FDLength=1; - - } - /* Change the last FDNext pointer to make a circular list */ - tx_fd_ptr--; - tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->tx_fdalist_vp); - - /* Point the device at the chain of Rx and Tx Buffers */ - writel((unsigned int)__dma_pa(priv->rx_fda_ptr),ETHER_FDA_BAS(dev->base_addr)); - writel((RX_NUM_FDESC-1)*sizeof(struct rx_fda_ent),ETHER_FDA_LIM(dev->base_addr)); - writel((unsigned int)__dma_pa(priv->rx_blist_vp),ETHER_BLFRMPTR(dev->base_addr)); - - writel((unsigned int)__dma_pa(priv->tx_fdalist_vp),ETHER_TXFRMPTR(dev->base_addr)); - - return 0; -} - - -void ether00_mem_update(void* dev_id) -{ - struct net_device* dev=dev_id; - struct net_priv* priv=dev->priv; - struct sk_buff* skb; - struct tx_fda_ent *fda_ptr=priv->tx_fdalist_vp; - struct rx_blist_ent* blist_ent_ptr; - unsigned long flags; - - priv->tq_memupdate.sync=0; - //priv->tq_memupdate.list= - priv->memupdate_scheduled=0; - - /* Transmit interrupt */ - while(fda_ptr<(priv->tx_fdalist_vp+TX_NUM_FDESC)){ - if(!(FDCTL_COWNSFD_MSK&fda_ptr->fd.FDCtl) && (ETHER_TX_STAT_COMP_MSK&fda_ptr->fd.FDStat)){ - priv->stats.tx_packets++; - priv->stats.tx_bytes+=fda_ptr->bd.BuffLength; - skb=(struct sk_buff*)fda_ptr->fd.FDSystem; - //printk("%d:txcln:fda=%#x skb=%#x\n",jiffies,fda_ptr,skb); - dev_kfree_skb(skb); - fda_ptr->fd.FDSystem=0; - fda_ptr->fd.FDStat=0; - fda_ptr->fd.FDCtl=0; - } - fda_ptr++; - } - /* Fill in any missing buffers from the received queue */ - spin_lock_irqsave(&priv->rx_lock,flags); - blist_ent_ptr=priv->rx_blist_vp; - while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){ - /* fd.FDSystem of 0 indicates we failed to allocate the buffer in the ISR */ - if(!blist_ent_ptr->fd.FDSystem){ - struct sk_buff *skb; - skb=dev_alloc_skb(PKT_BUF_SZ); - blist_ent_ptr->fd.FDSystem=(unsigned int)skb; - if(skb){ - setup_blist_entry(skb,blist_ent_ptr); - } - else - { - break; - } - } - blist_ent_ptr++; - } - spin_unlock_irqrestore(&priv->rx_lock,flags); - if(priv->queue_stopped){ - //printk("%d:cln:start q\n",jiffies); - netif_start_queue(dev); - } - if(priv->rx_disabled){ - //printk("%d:enable_irq\n",jiffies); - priv->rx_disabled=0; - writel(ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr)); - - } -} - - -static void ether00_int( int irq_num, void* dev_id, struct pt_regs* regs) -{ - struct net_device* dev=dev_id; - struct net_priv* priv=dev->priv; - - unsigned int interruptValue; - - interruptValue=readl(ETHER_INT_SRC(dev->base_addr)); - - //printk("INT_SRC=%x\n",interruptValue); - - if(!(readl(ETHER_INT_SRC(dev->base_addr)) & ETHER_INT_SRC_IRQ_MSK)) - { - return; /* Interrupt wasn't caused by us!! */ - } - - if(readl(ETHER_INT_SRC(dev->base_addr))& - (ETHER_INT_SRC_INTMACRX_MSK | - ETHER_INT_SRC_FDAEX_MSK | - ETHER_INT_SRC_BLEX_MSK)) { - struct rx_blist_ent* blist_ent_ptr; - struct rx_fda_ent* fda_ent_ptr; - struct sk_buff* skb; - - fda_ent_ptr=priv->rx_fda_ptr; - spin_lock(&priv->rx_lock); - while(fda_ent_ptr<(priv->rx_fda_ptr+RX_NUM_FDESC)){ - int result; - - if(!(fda_ent_ptr->fd.FDCtl&FDCTL_COWNSFD_MSK)) - { - /* This frame is ready for processing */ - /*find the corresponding buffer in the bufferlist */ - blist_ent_ptr=priv->rx_blist_vp+fda_ent_ptr->bd.BDStat; - skb=(struct sk_buff*)blist_ent_ptr->fd.FDSystem; - - /* Pass this skb up the stack */ - skb->dev=dev; - skb_put(skb,fda_ent_ptr->fd.FDLength); - skb->protocol=eth_type_trans(skb,dev); - skb->ip_summed=CHECKSUM_UNNECESSARY; - result=netif_rx(skb); - /* Update statistics */ - priv->stats.rx_packets++; - priv->stats.rx_bytes+=fda_ent_ptr->fd.FDLength; - - /* Free the FDA entry */ - fda_ent_ptr->bd.BDStat=0xff; - fda_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK; - - /* Allocate a new skb and point the bd entry to it */ - blist_ent_ptr->fd.FDSystem=0; - skb=dev_alloc_skb(PKT_BUF_SZ); - //printk("allocskb=%#x\n",skb); - if(skb){ - setup_blist_entry(skb,blist_ent_ptr); - - } - else if(!priv->memupdate_scheduled){ - int tmp; - /* There are no buffers at the moment, so schedule */ - /* the background task to sort this out */ - schedule_task(&priv->tq_memupdate); - priv->memupdate_scheduled=1; - printk(KERN_DEBUG "%s:No buffers",dev->name); - /* If this interrupt was due to a lack of buffers then - * we'd better stop the receiver too */ - if(interruptValueÐER_INT_SRC_BLEX_MSK){ - priv->rx_disabled=1; - tmp=readl(ETHER_INT_SRC(dev->base_addr)); - writel(tmp&~ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr)); - printk(KERN_DEBUG "%s:Halting rx",dev->name); - } - - } - - } - fda_ent_ptr++; - } - spin_unlock(&priv->rx_lock); - - /* Clear the interrupts */ - writel(ETHER_INT_SRC_INTMACRX_MSK | ETHER_INT_SRC_FDAEX_MSK - | ETHER_INT_SRC_BLEX_MSK,ETHER_INT_SRC(dev->base_addr)); - - } - - if(readl(ETHER_INT_SRC(dev->base_addr))ÐER_INT_SRC_INTMACTX_MSK){ - - if(!priv->memupdate_scheduled){ - schedule_task(&priv->tq_memupdate); - priv->memupdate_scheduled=1; - } - /* Clear the interrupt */ - writel(ETHER_INT_SRC_INTMACTX_MSK,ETHER_INT_SRC(dev->base_addr)); - } - - if (readl(ETHER_INT_SRC(dev->base_addr)) & (ETHER_INT_SRC_SWINT_MSK| - ETHER_INT_SRC_INTEARNOT_MSK| - ETHER_INT_SRC_INTLINK_MSK| - ETHER_INT_SRC_INTEXBD_MSK| - ETHER_INT_SRC_INTTXCTLCMP_MSK)) - { - /* - * Not using any of these so they shouldn't happen - * - * In the cased of INTEXBD - if you allocate more - * than 28 decsriptors you may need to think about this - */ - printk("Not using this interrupt\n"); - } - - if (readl(ETHER_INT_SRC(dev->base_addr)) & - (ETHER_INT_SRC_INTSBUS_MSK | - ETHER_INT_SRC_INTNRABT_MSK - |ETHER_INT_SRC_DMPARERR_MSK)) - { - /* - * Hardware errors, we can either ignore them and hope they go away - *or reset the device, I'll try the first for now to see if they happen - */ - printk("Hardware error\n"); - } -} - -static void ether00_setup_ethernet_address(struct net_device* dev) -{ - int tmp; - - dev->addr_len=6; - writew(0,ETHER_ARC_ADR(dev->base_addr)); - writel((dev->dev_addr[0]<<24) | - (dev->dev_addr[1]<<16) | - (dev->dev_addr[2]<<8) | - dev->dev_addr[3], - ETHER_ARC_DATA(dev->base_addr)); - - writew(4,ETHER_ARC_ADR(dev->base_addr)); - tmp=readl(ETHER_ARC_DATA(dev->base_addr)); - tmp&=0xffff; - tmp|=(dev->dev_addr[4]<<24) | (dev->dev_addr[5]<<16); - writel(tmp, ETHER_ARC_DATA(dev->base_addr)); - /* Enable this entry in the ARC */ - - writel(1,ETHER_ARC_ENA(dev->base_addr)); - - return; -} - - -static void ether00_reset(struct net_device *dev) -{ - /* reset the controller */ - writew(ETHER_MAC_CTL_RESET_MSK,ETHER_MAC_CTL(dev->base_addr)); - - /* - * Make sure we're not going to send anything - */ - - writew(ETHER_TX_CTL_TXHALT_MSK,ETHER_TX_CTL(dev->base_addr)); - - /* - * Make sure we're not going to receive anything - */ - writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr)); - - /* - * Disable Interrupts for now, and set the burst size to 8 bytes - */ - - writel(ETHER_DMA_CTL_INTMASK_MSK | - ((8 << ETHER_DMA_CTL_DMBURST_OFST) & ETHER_DMA_CTL_DMBURST_MSK) - |(2<<ETHER_DMA_CTL_RXALIGN_OFST), - ETHER_DMA_CTL(dev->base_addr)); - - - /* - * Set TxThrsh - start transmitting a packet after 1514 - * bytes or when a packet is complete, whichever comes first - */ - writew(1514,ETHER_TXTHRSH(dev->base_addr)); - - /* - * Set TxPollCtr. Each cycle is - * 61.44 microseconds with a 33 MHz bus - */ - writew(1,ETHER_TXPOLLCTR(dev->base_addr)); - - /* - * Set Rx_Ctl - Turn off reception and let RxData turn it - * on later - */ - writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr)); - -} - - -static void ether00_set_multicast(struct net_device* dev) -{ - int count=dev->mc_count; - - /* Set promiscuous mode if it's asked for. */ - - if (dev->flags&IFF_PROMISC){ - - writew( ETHER_ARC_CTL_COMPEN_MSK | - ETHER_ARC_CTL_BROADACC_MSK | - ETHER_ARC_CTL_GROUPACC_MSK | - ETHER_ARC_CTL_STATIONACC_MSK, - ETHER_ARC_CTL(dev->base_addr)); - return; - } - - /* - * Get all multicast packets if required, or if there are too - * many addresses to fit in hardware - */ - if (dev->flags & IFF_ALLMULTI){ - writew( ETHER_ARC_CTL_COMPEN_MSK | - ETHER_ARC_CTL_GROUPACC_MSK | - ETHER_ARC_CTL_BROADACC_MSK, - ETHER_ARC_CTL(dev->base_addr)); - return; - } - if (dev->mc_count > (ETHER_ARC_SIZE - 1)){ - - printk(KERN_WARNING "Too many multicast addresses for hardware to filter - receiving all multicast packets\n"); - writew( ETHER_ARC_CTL_COMPEN_MSK | - ETHER_ARC_CTL_GROUPACC_MSK | - ETHER_ARC_CTL_BROADACC_MSK, - ETHER_ARC_CTL(dev->base_addr)); - return; - } - - if(dev->mc_count){ - struct dev_mc_list *mc_list_ent=dev->mc_list; - unsigned int temp,i; - DEBUG(printk("mc_count=%d mc_list=%#x\n",dev-> mc_count, dev->mc_list)); - DEBUG(printk("mc addr=%02#x%02x%02x%02x%02x%02x\n", - mc_list_ent->dmi_addr[5], - mc_list_ent->dmi_addr[4], - mc_list_ent->dmi_addr[3], - mc_list_ent->dmi_addr[2], - mc_list_ent->dmi_addr[1], - mc_list_ent->dmi_addr[0]);) - - /* - * The first 6 bytes are the MAC address, so - * don't change them! - */ - writew(4,ETHER_ARC_ADR(dev->base_addr)); - temp=readl(ETHER_ARC_DATA(dev->base_addr)); - temp&=0xffff0000; - - /* Disable the current multicast stuff */ - writel(1,ETHER_ARC_ENA(dev->base_addr)); - - for(;;){ - temp|=mc_list_ent->dmi_addr[1] | - mc_list_ent->dmi_addr[0]<<8; - writel(temp,ETHER_ARC_DATA(dev->base_addr)); - - i=readl(ETHER_ARC_ADR(dev->base_addr)); - writew(i+4,ETHER_ARC_ADR(dev->base_addr)); - - temp=mc_list_ent->dmi_addr[5]| - mc_list_ent->dmi_addr[4]<<8 | - mc_list_ent->dmi_addr[3]<<16 | - mc_list_ent->dmi_addr[2]<<24; - writel(temp,ETHER_ARC_DATA(dev->base_addr)); - - count--; - if(!mc_list_ent->next || !count){ - break; - } - DEBUG(printk("mc_list_next=%#x\n",mc_list_ent->next);) - mc_list_ent=mc_list_ent->next; - - - i=readl(ETHER_ARC_ADR(dev->base_addr)); - writel(i+4,ETHER_ARC_ADR(dev->base_addr)); - - temp=mc_list_ent->dmi_addr[3]| - mc_list_ent->dmi_addr[2]<<8 | - mc_list_ent->dmi_addr[1]<<16 | - mc_list_ent->dmi_addr[0]<<24; - writel(temp,ETHER_ARC_DATA(dev->base_addr)); - - i=readl(ETHER_ARC_ADR(dev->base_addr)); - writel(i+4,ETHER_ARC_ADR(dev->base_addr)); - - temp=mc_list_ent->dmi_addr[4]<<16 | - mc_list_ent->dmi_addr[5]<<24; - - writel(temp,ETHER_ARC_DATA(dev->base_addr)); - - count--; - if(!mc_list_ent->next || !count){ - break; - } - mc_list_ent=mc_list_ent->next; - } - - - if(count) - printk(KERN_WARNING "Multicast list size error\n"); - - - writew( ETHER_ARC_CTL_BROADACC_MSK| - ETHER_ARC_CTL_COMPEN_MSK, - ETHER_ARC_CTL(dev->base_addr)); - - } - - /* enable the active ARC enties */ - writew((1<<(count+2))-1,ETHER_ARC_ENA(dev->base_addr)); -} - - -static int ether00_open(struct net_device* dev) -{ - int result,tmp; - struct net_priv* priv; - - if (!is_valid_ether_addr(dev->dev_addr)) - return -EINVAL; - - /* Install interrupt handlers */ - result=request_irq(dev->irq,ether00_int,0,"ether00",dev); - if(result) - goto open_err1; - - result=request_irq(2,ether00_phy_int,0,"ether00_phy",dev); - if(result) - goto open_err2; - - ether00_reset(dev); - result=ether00_mem_init(dev); - if(result) - goto open_err3; - - - ether00_setup_ethernet_address(dev); - - ether00_set_multicast(dev); - - result=ether00_write_phy(dev,PHY_CONTROL, PHY_CONTROL_ANEGEN_MSK | PHY_CONTROL_RANEG_MSK); - if(result) - goto open_err4; - result=ether00_write_phy(dev,PHY_IRQ_CONTROL, PHY_IRQ_CONTROL_LS_CHG_IE_MSK | - PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK); - if(result) - goto open_err4; - - /* Start the device enable interrupts */ - writew(ETHER_RX_CTL_RXEN_MSK -// | ETHER_RX_CTL_STRIPCRC_MSK - | ETHER_RX_CTL_ENGOOD_MSK - | ETHER_RX_CTL_ENRXPAR_MSK| ETHER_RX_CTL_ENLONGERR_MSK - | ETHER_RX_CTL_ENOVER_MSK| ETHER_RX_CTL_ENCRCERR_MSK, - ETHER_RX_CTL(dev->base_addr)); - - writew(ETHER_TX_CTL_TXEN_MSK| - ETHER_TX_CTL_ENEXDEFER_MSK| - ETHER_TX_CTL_ENLCARR_MSK| - ETHER_TX_CTL_ENEXCOLL_MSK| - ETHER_TX_CTL_ENLATECOLL_MSK| - ETHER_TX_CTL_ENTXPAR_MSK| - ETHER_TX_CTL_ENCOMP_MSK, - ETHER_TX_CTL(dev->base_addr)); - - tmp=readl(ETHER_DMA_CTL(dev->base_addr)); - writel(tmp&~ETHER_DMA_CTL_INTMASK_MSK,ETHER_DMA_CTL(dev->base_addr)); - - return 0; - - open_err4: - ether00_reset(dev); - open_err3: - free_irq(2,dev); - open_err2: - free_irq(dev->irq,dev); - open_err1: - return result; - -} - - -static int ether00_tx(struct sk_buff* skb, struct net_device* dev) -{ - struct net_priv *priv=dev->priv; - struct tx_fda_ent *fda_ptr; - int i; - - - /* - * Find an empty slot in which to stick the frame - */ - fda_ptr=(struct tx_fda_ent*)__dma_va(readl(ETHER_TXFRMPTR(dev->base_addr))); - i=0; - while(i<TX_NUM_FDESC){ - if (fda_ptr->fd.FDStat||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){ - fda_ptr =(struct tx_fda_ent*) __dma_va((struct tx_fda_ent*)fda_ptr->fd.FDNext); - } - else { - break; - } - i++; - } - - /* Write the skb data from the cache*/ - consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE); - fda_ptr->bd.BuffData=(char*)__pa(skb->data); - fda_ptr->bd.BuffLength=(unsigned short)skb->len; - /* Save the pointer to the skb for freeing later */ - fda_ptr->fd.FDSystem=(unsigned int)skb; - fda_ptr->fd.FDStat=0; - /* Pass ownership of the buffers to the controller */ - fda_ptr->fd.FDCtl=1; - fda_ptr->fd.FDCtl|=FDCTL_COWNSFD_MSK; - - /* If the next buffer in the list is full, stop the queue */ - fda_ptr=(struct tx_fda_ent*)__dma_va(fda_ptr->fd.FDNext); - if ((fda_ptr->fd.FDStat)||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){ - netif_stop_queue(dev); - priv->queue_stopped=1; - } - - return 0; -} - -static struct net_device_stats *ether00_stats(struct net_device* dev) -{ - struct net_priv *priv=dev->priv; - return &priv->stats; -} - - -static int ether00_stop(struct net_device* dev) -{ - struct net_priv *priv=dev->priv; - int tmp; - - /* Stop/disable the device. */ - tmp=readw(ETHER_RX_CTL(dev->base_addr)); - tmp&=~(ETHER_RX_CTL_RXEN_MSK | ETHER_RX_CTL_ENGOOD_MSK); - tmp|=ETHER_RX_CTL_RXHALT_MSK; - writew(tmp,ETHER_RX_CTL(dev->base_addr)); - - tmp=readl(ETHER_TX_CTL(dev->base_addr)); - tmp&=~ETHER_TX_CTL_TXEN_MSK; - tmp|=ETHER_TX_CTL_TXHALT_MSK; - writel(tmp,ETHER_TX_CTL(dev->base_addr)); - - /* Free up system resources */ - free_irq(dev->irq,dev); - free_irq(2,dev); - iounmap(priv->dma_data); - - return 0; -} - - -static void ether00_get_ethernet_address(struct net_device* dev) -{ - struct mtd_info *mymtd=NULL; - int i; - size_t retlen; - - /* - * For the Epxa10 dev board (camelot), the ethernet MAC - * address is of the form 00:aa:aa:00:xx:xx where - * 00:aa:aa is the Altera vendor ID and xx:xx is the - * last 2 bytes of the board serial number, as programmed - * into the OTP area of the flash device on EBI1. If this - * isn't an expa10 dev board, or there's no mtd support to - * read the serial number from flash then we'll force the - * use to set their own mac address using ifconfig. - */ - -#ifdef CONFIG_ARCH_CAMELOT -#ifdef CONFIG_MTD - /* get the mtd_info structure for the first mtd device*/ - for(i=0;i<MAX_MTD_DEVICES;i++){ - mymtd=get_mtd_device(NULL,i); - if(!mymtd||!strcmp(mymtd->name,"EPXA10DB flash")) - break; - } - - if(!mymtd || !mymtd->read_user_prot_reg){ - printk(KERN_WARNING "%s: Failed to read MAC address from flash\n",dev->name); - }else{ - mymtd->read_user_prot_reg(mymtd,2,1,&retlen,&dev->dev_addr[5]); - mymtd->read_user_prot_reg(mymtd,3,1,&retlen,&dev->dev_addr[4]); - dev->dev_addr[3]=0; - dev->dev_addr[2]=vendor_id[1]; - dev->dev_addr[1]=vendor_id[0]; - dev->dev_addr[0]=0; - } -#else - printk(KERN_WARNING "%s: MTD support required to read MAC address from EPXA10 dev board\n", dev->name); -#endif -#endif - - if (!is_valid_ether_addr(dev->dev_addr)) - printk("%s: Invalid ethernet MAC address. Please set using " - "ifconfig\n", dev->name); - -} - -/* - * Keep a mapping of dev_info addresses -> port lines to use when - * removing ports dev==NULL indicates unused entry - */ - - -static struct net_device* dev_list[ETH_NR]; - -static int ether00_add_device(struct pldhs_dev_info* dev_info,void* dev_ps_data) -{ - struct net_device *dev; - struct net_priv *priv; - void *map_addr; - int result; - int i; - - i=0; - while(dev_list[i] && i < ETH_NR) - i++; - - if(i==ETH_NR){ - printk(KERN_WARNING "ether00: Maximum number of ports reached\n"); - return 0; - } - - - if (!request_mem_region(dev_info->base_addr, MAC_REG_SIZE, "ether00")) - return -EBUSY; - - dev = alloc_etherdev(sizeof(struct net_priv)); - if(!dev) { - result = -ENOMEM; - goto out_release; - } - priv = dev->priv; - - priv->tq_memupdate.routine=ether00_mem_update; - priv->tq_memupdate.data=(void*) dev; - - spin_lock_init(&priv->rx_lock); - - map_addr=ioremap_nocache(dev_info->base_addr,SZ_4K); - if(!map_addr){ - result = -ENOMEM; - out_kfree; - } - - dev->open=ether00_open; - dev->stop=ether00_stop; - dev->set_multicast_list=ether00_set_multicast; - dev->hard_start_xmit=ether00_tx; - dev->get_stats=ether00_stats; - - ether00_get_ethernet_address(dev); - - SET_MODULE_OWNER(dev); - - dev->base_addr=(unsigned int)map_addr; - dev->irq=dev_info->irq; - dev->features=NETIF_F_DYNALLOC | NETIF_F_HW_CSUM; - - result=register_netdev(dev); - if(result){ - printk("Ether00: Error %i registering driver\n",result); - goto out_unmap; - } - printk("registered ether00 device at %#x\n",dev_info->base_addr); - - dev_list[i]=dev; - - return result; - - out_unmap: - iounmap(map_addr); - out_kfree: - free_netdev(dev); - out_release: - release_mem_region(dev_info->base_addr, MAC_REG_SIZE); - return result; -} - - -static int ether00_remove_devices(void) -{ - int i; - - for(i=0;i<ETH_NR;i++){ - if(dev_list[i]){ - netif_device_detach(dev_list[i]); - unregister_netdev(dev_list[i]); - iounmap((void*)dev_list[i]->base_addr); - release_mem_region(dev_list[i]->base_addr, MAC_REG_SIZE); - free_netdev(dev_list[i]); - dev_list[i]=0; - } - } - return 0; -} - -static struct pld_hotswap_ops ether00_pldhs_ops={ - .name = ETHER00_NAME, - .add_device = ether00_add_device, - .remove_devices = ether00_remove_devices, -}; - - -static void __exit ether00_cleanup_module(void) -{ - int result; - result=ether00_remove_devices(); - if(result) - printk(KERN_WARNING "ether00: failed to remove all devices\n"); - - pldhs_unregister_driver(ETHER00_NAME); -} -module_exit(ether00_cleanup_module); - - -static int __init ether00_mod_init(void) -{ - printk("mod init\n"); - return pldhs_register_driver(ðer00_pldhs_ops); - -} - -module_init(ether00_mod_init); - diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c index 1cc53abc3a3..f1d5b1027ff 100644 --- a/drivers/net/arm/ether3.c +++ b/drivers/net/arm/ether3.c @@ -69,7 +69,6 @@ #include <asm/system.h> #include <asm/ecard.h> #include <asm/io.h> -#include <asm/irq.h> static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 942a2819576..6a93b666eb7 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -50,7 +50,6 @@ #include <asm/system.h> #include <asm/ecard.h> #include <asm/io.h> -#include <asm/irq.h> #include "../8390.h" diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 09ed05727bc..dda5a5f79c5 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -146,7 +146,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/ecard.h> #include "../scsi.h" diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c index 804125e35fc..a2894015670 100644 --- a/drivers/scsi/arm/arxescsi.c +++ b/drivers/scsi/arm/arxescsi.c @@ -33,7 +33,6 @@ #include <asm/dma.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/ecard.h> #include "../scsi.h" diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index 81e266be26d..e6c9491dc5c 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -13,7 +13,6 @@ #include <asm/ecard.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/system.h> #include "../scsi.h" diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index 3a7a46b0dc4..583d2d8c833 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c @@ -31,7 +31,6 @@ #include <asm/dma.h> #include <asm/ecard.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/pgtable.h> #include "../scsi.h" diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index 4d1e8f52c92..3ffec7efc9d 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -35,7 +35,6 @@ #include <linux/dma-mapping.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/dma.h> #include <asm/ecard.h> #include <asm/pgtable.h> diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index 3333d7b3913..3113bdcedb1 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c @@ -22,7 +22,6 @@ #include <asm/dma.h> #include <asm/ecard.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/pgtable.h> #include "../scsi.h" diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3fd5b999fda..1bae26a8a50 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -369,29 +369,6 @@ config SERIAL_21285_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) -config SERIAL_UART00 - bool "Excalibur serial port (uart00) support" - depends on ARM && ARCH_CAMELOT - select SERIAL_CORE - help - Say Y here if you want to use the hard logic uart on Excalibur. This - driver also supports soft logic implementations of this uart core. - -config SERIAL_UART00_CONSOLE - bool "Support for console on Excalibur serial port" - depends on SERIAL_UART00 - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console on an Excalibur - hard logic uart or uart00 IP core. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - config SERIAL_MPSC bool "Marvell MPSC serial port support" depends on PPC32 && MV64X60 diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index d7c7c7180e3..137148bba4f 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o obj-$(CONFIG_SERIAL_PXA) += pxa.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_UART00) += uart00.o obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o diff --git a/drivers/serial/uart00.c b/drivers/serial/uart00.c deleted file mode 100644 index 47b504ff38b..00000000000 --- a/drivers/serial/uart00.c +++ /dev/null @@ -1,782 +0,0 @@ -/* - * linux/drivers/serial/uart00.c - * - * Driver for UART00 serial ports - * - * Based on drivers/char/serial_amba.c, by ARM Limited & - * Deep Blue Solutions Ltd. - * Copyright 2001 Altera Corporation - * - * Update for 2.6.4 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * $Id: uart00.c,v 1.35 2002/07/28 10:03:28 rmk Exp $ - * - */ -#include <linux/config.h> - -#if defined(CONFIG_SERIAL_UART00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/sizes.h> - -#include <asm/arch/excalibur.h> -#define UART00_TYPE (volatile unsigned int*) -#include <asm/arch/uart00.h> -#include <asm/arch/int_ctrl00.h> - -#define UART_NR 2 - -#define SERIAL_UART00_NAME "ttyUA" -#define SERIAL_UART00_MAJOR 204 -#define SERIAL_UART00_MINOR 16 /* Temporary - will change in future */ -#define SERIAL_UART00_NR UART_NR -#define UART_PORT_SIZE 0x50 - -#define UART00_ISR_PASS_LIMIT 256 - -/* - * Access macros for the UART00 UARTs - */ -#define UART_GET_INT_STATUS(p) inl(UART_ISR((p)->membase)) -#define UART_PUT_IES(p, c) outl(c,UART_IES((p)->membase)) -#define UART_GET_IES(p) inl(UART_IES((p)->membase)) -#define UART_PUT_IEC(p, c) outl(c,UART_IEC((p)->membase)) -#define UART_GET_IEC(p) inl(UART_IEC((p)->membase)) -#define UART_PUT_CHAR(p, c) outl(c,UART_TD((p)->membase)) -#define UART_GET_CHAR(p) inl(UART_RD((p)->membase)) -#define UART_GET_RSR(p) inl(UART_RSR((p)->membase)) -#define UART_GET_RDS(p) inl(UART_RDS((p)->membase)) -#define UART_GET_MSR(p) inl(UART_MSR((p)->membase)) -#define UART_GET_MCR(p) inl(UART_MCR((p)->membase)) -#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase)) -#define UART_GET_MC(p) inl(UART_MC((p)->membase)) -#define UART_PUT_MC(p, c) outl(c,UART_MC((p)->membase)) -#define UART_GET_TSR(p) inl(UART_TSR((p)->membase)) -#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase)) -#define UART_PUT_DIV_HI(p,c) outl(c,UART_DIV_HI((p)->membase)) -#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase)) -#define UART_PUT_DIV_LO(p,c) outl(c,UART_DIV_LO((p)->membase)) -#define UART_RX_DATA(s) ((s) & UART_RSR_RX_LEVEL_MSK) -#define UART_TX_READY(s) (((s) & UART_TSR_TX_LEVEL_MSK) < 15) -//#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART00_UARTFR_TMSK) == 0) - -static void uart00_stop_tx(struct uart_port *port) -{ - UART_PUT_IEC(port, UART_IEC_TIE_MSK); -} - -static void uart00_stop_rx(struct uart_port *port) -{ - UART_PUT_IEC(port, UART_IEC_RE_MSK); -} - -static void uart00_enable_ms(struct uart_port *port) -{ - UART_PUT_IES(port, UART_IES_ME_MSK); -} - -static void -uart00_rx_chars(struct uart_port *port, struct pt_regs *regs) -{ - struct tty_struct *tty = port->info->tty; - unsigned int status, ch, rds, flg, ignored = 0; - - status = UART_GET_RSR(port); - while (UART_RX_DATA(status)) { - /* - * We need to read rds before reading the - * character from the fifo - */ - rds = UART_GET_RDS(port); - ch = UART_GET_CHAR(port); - port->icount.rx++; - - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - goto ignore_char; - - flg = TTY_NORMAL; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (rds & (UART_RDS_BI_MSK |UART_RDS_FE_MSK| - UART_RDS_PE_MSK |UART_RDS_PE_MSK)) - goto handle_error; - if (uart_handle_sysrq_char(port, ch, regs)) - goto ignore_char; - - error_return: - tty_insert_flip_char(tty, ch, flg); - - ignore_char: - status = UART_GET_RSR(port); - } - out: - tty_flip_buffer_push(tty); - return; - - handle_error: - if (rds & UART_RDS_BI_MSK) { - status &= ~(UART_RDS_FE_MSK | UART_RDS_PE_MSK); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } else if (rds & UART_RDS_PE_MSK) - port->icount.parity++; - else if (rds & UART_RDS_FE_MSK) - port->icount.frame++; - if (rds & UART_RDS_OE_MSK) - port->icount.overrun++; - - if (rds & port->ignore_status_mask) { - if (++ignored > 100) - goto out; - goto ignore_char; - } - rds &= port->read_status_mask; - - if (rds & UART_RDS_BI_MSK) - flg = TTY_BREAK; - else if (rds & UART_RDS_PE_MSK) - flg = TTY_PARITY; - else if (rds & UART_RDS_FE_MSK) - flg = TTY_FRAME; - - if (rds & UART_RDS_OE_MSK) { - /* - * CHECK: does overrun affect the current character? - * ASSUMPTION: it does not. - */ - tty_insert_flip_char(tty, ch, flg); - ch = 0; - flg = TTY_OVERRUN; - } -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - goto error_return; -} - -static void uart00_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - int count; - - if (port->x_char) { - while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15) - barrier(); - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - uart00_stop_tx(port); - return; - } - - count = port->fifosize >> 1; - do { - while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15) - barrier(); - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - uart00_stop_tx(port); -} - -static void uart00_start_tx(struct uart_port *port) -{ - UART_PUT_IES(port, UART_IES_TIE_MSK); - uart00_tx_chars(port); -} - -static void uart00_modem_status(struct uart_port *port) -{ - unsigned int status; - - status = UART_GET_MSR(port); - - if (!(status & (UART_MSR_DCTS_MSK | UART_MSR_DDSR_MSK | - UART_MSR_TERI_MSK | UART_MSR_DDCD_MSK))) - return; - - if (status & UART_MSR_DDCD_MSK) - uart_handle_dcd_change(port, status & UART_MSR_DCD_MSK); - - if (status & UART_MSR_DDSR_MSK) - port->icount.dsr++; - - if (status & UART_MSR_DCTS_MSK) - uart_handle_cts_change(port, status & UART_MSR_CTS_MSK); - - wake_up_interruptible(&port->info->delta_msr_wait); -} - -static irqreturn_t uart00_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct uart_port *port = dev_id; - unsigned int status, pass_counter = 0; - - status = UART_GET_INT_STATUS(port); - do { - if (status & UART_ISR_RI_MSK) - uart00_rx_chars(port, regs); - if (status & UART_ISR_MI_MSK) - uart00_modem_status(port); - if (status & (UART_ISR_TI_MSK | UART_ISR_TII_MSK)) - uart00_tx_chars(port); - if (pass_counter++ > UART00_ISR_PASS_LIMIT) - break; - - status = UART_GET_INT_STATUS(port); - } while (status); - - return IRQ_HANDLED; -} - -static unsigned int uart00_tx_empty(struct uart_port *port) -{ - return UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK? 0 : TIOCSER_TEMT; -} - -static unsigned int uart00_get_mctrl(struct uart_port *port) -{ - unsigned int result = 0; - unsigned int status; - - status = UART_GET_MSR(port); - if (status & UART_MSR_DCD_MSK) - result |= TIOCM_CAR; - if (status & UART_MSR_DSR_MSK) - result |= TIOCM_DSR; - if (status & UART_MSR_CTS_MSK) - result |= TIOCM_CTS; - if (status & UART_MSR_RI_MSK) - result |= TIOCM_RI; - - return result; -} - -static void uart00_set_mctrl_null(struct uart_port *port, unsigned int mctrl) -{ -} - -static void uart00_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int mcr; - - spin_lock_irqsave(&port->lock, flags); - mcr = UART_GET_MCR(port); - if (break_state == -1) - mcr |= UART_MCR_BR_MSK; - else - mcr &= ~UART_MCR_BR_MSK; - UART_PUT_MCR(port, mcr); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void -uart00_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) -{ - unsigned int uart_mc, old_ies, baud, quot; - unsigned long flags; - - /* - * We don't support CREAD (yet) - */ - termios->c_cflag |= CREAD; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - /* byte size and parity */ - switch (termios->c_cflag & CSIZE) { - case CS5: - uart_mc = UART_MC_CLS_CHARLEN_5; - break; - case CS6: - uart_mc = UART_MC_CLS_CHARLEN_6; - break; - case CS7: - uart_mc = UART_MC_CLS_CHARLEN_7; - break; - default: // CS8 - uart_mc = UART_MC_CLS_CHARLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - uart_mc|= UART_MC_ST_TWO; - if (termios->c_cflag & PARENB) { - uart_mc |= UART_MC_PE_MSK; - if (!(termios->c_cflag & PARODD)) - uart_mc |= UART_MC_EP_MSK; - } - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UART_RDS_OE_MSK; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART_RDS_BI_MSK; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART_RDS_BI_MSK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_RDS_OE_MSK; - } - - /* first, disable everything */ - old_ies = UART_GET_IES(port); - - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_ies |= UART_IES_ME_MSK; - - /* Set baud rate */ - UART_PUT_DIV_LO(port, (quot & 0xff)); - UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); - - UART_PUT_MC(port, uart_mc); - UART_PUT_IES(port, old_ies); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static int uart00_startup(struct uart_port *port) -{ - int result; - - /* - * Allocate the IRQ - */ - result = request_irq(port->irq, uart00_int, 0, "uart00", port); - if (result) { - printk(KERN_ERR "Request of irq %d failed\n", port->irq); - return result; - } - - /* - * Finally, enable interrupts. Use the TII interrupt to minimise - * the number of interrupts generated. If higher performance is - * needed, consider using the TI interrupt with a suitable FIFO - * threshold - */ - UART_PUT_IES(port, UART_IES_RE_MSK | UART_IES_TIE_MSK); - - return 0; -} - -static void uart00_shutdown(struct uart_port *port) -{ - /* - * disable all interrupts, disable the port - */ - UART_PUT_IEC(port, 0xff); - - /* disable break condition and fifos */ - UART_PUT_MCR(port, UART_GET_MCR(port) &~UART_MCR_BR_MSK); - - /* - * Free the interrupt - */ - free_irq(port->irq, port); -} - -static const char *uart00_type(struct uart_port *port) -{ - return port->type == PORT_UART00 ? "Altera UART00" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void uart00_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); - -#ifdef CONFIG_ARCH_CAMELOT - if (port->membase != (void*)IO_ADDRESS(EXC_UART00_BASE)) { - iounmap(port->membase); - } -#endif -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int uart00_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, "serial_uart00") - != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void uart00_config_port(struct uart_port *port, int flags) -{ - - /* - * Map the io memory if this is a soft uart - */ - if (!port->membase) - port->membase = ioremap_nocache(port->mapbase,SZ_4K); - - if (!port->membase) - printk(KERN_ERR "serial00: cannot map io memory\n"); - else - port->type = PORT_UART00; - -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int uart00_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops uart00_pops = { - .tx_empty = uart00_tx_empty, - .set_mctrl = uart00_set_mctrl_null, - .get_mctrl = uart00_get_mctrl, - .stop_tx = uart00_stop_tx, - .start_tx = uart00_start_tx, - .stop_rx = uart00_stop_rx, - .enable_ms = uart00_enable_ms, - .break_ctl = uart00_break_ctl, - .startup = uart00_startup, - .shutdown = uart00_shutdown, - .set_termios = uart00_set_termios, - .type = uart00_type, - .release_port = uart00_release_port, - .request_port = uart00_request_port, - .config_port = uart00_config_port, - .verify_port = uart00_verify_port, -}; - - -#ifdef CONFIG_ARCH_CAMELOT -static struct uart_port epxa10db_port = { - .membase = (void*)IO_ADDRESS(EXC_UART00_BASE), - .mapbase = EXC_UART00_BASE, - .iotype = SERIAL_IO_MEM, - .irq = IRQ_UART, - .uartclk = EXC_AHB2_CLK_FREQUENCY, - .fifosize = 16, - .ops = &uart00_pops, - .flags = ASYNC_BOOT_AUTOCONF, -}; -#endif - - -#ifdef CONFIG_SERIAL_UART00_CONSOLE -static void uart00_console_write(struct console *co, const char *s, unsigned count) -{ -#ifdef CONFIG_ARCH_CAMELOT - struct uart_port *port = &epxa10db_port; - unsigned int status, old_ies; - int i; - - /* - * First save the CR then disable the interrupts - */ - old_ies = UART_GET_IES(port); - UART_PUT_IEC(port,0xff); - - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_TSR(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_TSR(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, '\r'); - } - } - - /* - * Finally, wait for transmitter to become empty - * and restore the IES - */ - do { - status = UART_GET_TSR(port); - } while (status & UART_TSR_TX_LEVEL_MSK); - UART_PUT_IES(port, old_ies); -#endif -} - -static void __init -uart00_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - unsigned int uart_mc, quot; - - uart_mc = UART_GET_MC(port); - - *parity = 'n'; - if (uart_mc & UART_MC_PE_MSK) { - if (uart_mc & UART_MC_EP_MSK) - *parity = 'e'; - else - *parity = 'o'; - } - - switch (uart_mc & UART_MC_CLS_MSK) { - case UART_MC_CLS_CHARLEN_5: - *bits = 5; - break; - case UART_MC_CLS_CHARLEN_6: - *bits = 6; - break; - case UART_MC_CLS_CHARLEN_7: - *bits = 7; - break; - case UART_MC_CLS_CHARLEN_8: - *bits = 8; - break; - } - quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); - *baud = port->uartclk / (16 *quot ); -} - -static int __init uart00_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - -#ifdef CONFIG_ARCH_CAMELOT - port = &epxa10db_port; ; -#else - return -ENODEV; -#endif - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - uart00_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -extern struct uart_driver uart00_reg; -static struct console uart00_console = { - .name = SERIAL_UART00_NAME, - .write = uart00_console_write, - .device = uart_console_device, - .setup = uart00_console_setup, - .flags = CON_PRINTBUFFER, - .index = 0, - .data = &uart00_reg, -}; - -static int __init uart00_console_init(void) -{ - register_console(&uart00_console); - return 0; -} -console_initcall(uart00_console_init); - -#define UART00_CONSOLE &uart00_console -#else -#define UART00_CONSOLE NULL -#endif - -static struct uart_driver uart00_reg = { - .owner = NULL, - .driver_name = SERIAL_UART00_NAME, - .dev_name = SERIAL_UART00_NAME, - .major = SERIAL_UART00_MAJOR, - .minor = SERIAL_UART00_MINOR, - .nr = UART_NR, - .cons = UART00_CONSOLE, -}; - -struct dev_port_entry{ - unsigned int base_addr; - struct uart_port *port; -}; - -#ifdef CONFIG_PLD_HOTSWAP - -static struct dev_port_entry dev_port_map[UART_NR]; - -/* - * Keep a mapping of dev_info addresses -> port lines to use when - * removing ports dev==NULL indicates unused entry - */ - -struct uart00_ps_data{ - unsigned int clk; - unsigned int fifosize; -}; - -int uart00_add_device(struct pldhs_dev_info* dev_info, void* dev_ps_data) -{ - struct uart00_ps_data* dev_ps=dev_ps_data; - struct uart_port * port; - int i,result; - - i=0; - while(dev_port_map[i].port) - i++; - - if(i==UART_NR){ - printk(KERN_WARNING "uart00: Maximum number of ports reached\n"); - return 0; - } - - port=kmalloc(sizeof(struct uart_port),GFP_KERNEL); - if(!port) - return -ENOMEM; - - printk("clk=%d fifo=%d\n",dev_ps->clk,dev_ps->fifosize); - port->membase=0; - port->mapbase=dev_info->base_addr; - port->iotype=SERIAL_IO_MEM; - port->irq=dev_info->irq; - port->uartclk=dev_ps->clk; - port->fifosize=dev_ps->fifosize; - port->ops=&uart00_pops; - port->line=i; - port->flags=ASYNC_BOOT_AUTOCONF; - - result=uart_add_one_port(&uart00_reg, port); - if(result){ - printk("uart_add_one_port returned %d\n",result); - return result; - } - dev_port_map[i].base_addr=dev_info->base_addr; - dev_port_map[i].port=port; - printk("uart00: added device at %x as ttyUA%d\n",dev_port_map[i].base_addr,i); - return 0; - -} - -int uart00_remove_devices(void) -{ - int i,result; - - - result=0; - for(i=1;i<UART_NR;i++){ - if(dev_port_map[i].base_addr){ - result=uart_remove_one_port(&uart00_reg, dev_port_map[i].port); - if(result) - return result; - - /* port removed sucessfully, so now tidy up */ - kfree(dev_port_map[i].port); - dev_port_map[i].base_addr=0; - dev_port_map[i].port=NULL; - } - } - return 0; - -} - -struct pld_hotswap_ops uart00_pldhs_ops={ - .name = "uart00", - .add_device = uart00_add_device, - .remove_devices = uart00_remove_devices, -}; - -#endif - -static int __init uart00_init(void) -{ - int result; - - printk(KERN_INFO "Serial: UART00 driver $Revision: 1.35 $\n"); - - printk(KERN_WARNING "serial_uart00:Using temporary major/minor pairs" - " - these WILL change in the future\n"); - - result = uart_register_driver(&uart00_reg); - if (result) - return result; -#ifdef CONFIG_ARCH_CAMELOT - result = uart_add_one_port(&uart00_reg,&epxa10db_port); -#endif - if (result) - uart_unregister_driver(&uart00_reg); - -#ifdef CONFIG_PLD_HOTSWAP - pldhs_register_driver(&uart00_pldhs_ops); -#endif - return result; -} - -__initcall(uart00_init); diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index a9300f930ef..55a3514157e 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -50,7 +50,6 @@ #include <linux/init.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/pgtable.h> #include <asm/system.h> #include <asm/uaccess.h> diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 2ea1354e439..087e58689e4 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -178,7 +178,6 @@ #include <asm/hardware.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/mach-types.h> #include <asm/uaccess.h> #include <asm/arch/assabet.h> @@ -1455,7 +1454,11 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) static int __init sa1100fb_probe(struct platform_device *pdev) { struct sa1100fb_info *fbi; - int ret; + int ret, irq; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -EINVAL; if (!request_mem_region(0xb0100000, 0x10000, "LCD")) return -EBUSY; @@ -1470,7 +1473,7 @@ static int __init sa1100fb_probe(struct platform_device *pdev) if (ret) goto failed; - ret = request_irq(IRQ_LCD, sa1100fb_handle_irq, SA_INTERRUPT, + ret = request_irq(irq, sa1100fb_handle_irq, SA_INTERRUPT, "LCD", fbi); if (ret) { printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret); @@ -1492,7 +1495,7 @@ static int __init sa1100fb_probe(struct platform_device *pdev) ret = register_framebuffer(&fbi->fb); if (ret < 0) - goto failed; + goto err_free_irq; #ifdef CONFIG_CPU_FREQ fbi->freq_transition.notifier_call = sa1100fb_freq_transition; @@ -1504,7 +1507,9 @@ static int __init sa1100fb_probe(struct platform_device *pdev) /* This driver cannot be unloaded at the moment */ return 0; -failed: + err_free_irq: + free_irq(irq, fbi); + failed: platform_set_drvdata(pdev, NULL); kfree(fbi); release_mem_region(0xb0100000, 0x10000); diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig index e227a04261a..7490cc9208b 100644 --- a/fs/partitions/Kconfig +++ b/fs/partitions/Kconfig @@ -21,26 +21,30 @@ config ACORN_PARTITION Support hard disks partitioned under Acorn operating systems. config ACORN_PARTITION_CUMANA - bool "Cumana partition support" if PARTITION_ADVANCED && ACORN_PARTITION + bool "Cumana partition support" if PARTITION_ADVANCED default y if ARCH_ACORN + depends on ACORN_PARTITION help Say Y here if you would like to use hard disks under Linux which were partitioned using the Cumana interface on Acorn machines. config ACORN_PARTITION_EESOX - bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION + bool "EESOX partition support" if PARTITION_ADVANCED default y if ARCH_ACORN + depends on ACORN_PARTITION config ACORN_PARTITION_ICS - bool "ICS partition support" if PARTITION_ADVANCED && ACORN_PARTITION + bool "ICS partition support" if PARTITION_ADVANCED default y if ARCH_ACORN + depends on ACORN_PARTITION help Say Y here if you would like to use hard disks under Linux which were partitioned using the ICS interface on Acorn machines. config ACORN_PARTITION_ADFS - bool "Native filecore partition support" if PARTITION_ADVANCED && ACORN_PARTITION + bool "Native filecore partition support" if PARTITION_ADVANCED default y if ARCH_ACORN + depends on ACORN_PARTITION help The Acorn Disc Filing System is the standard file system of the RiscOS operating system which runs on Acorn's ARM-based Risc PC @@ -48,15 +52,17 @@ config ACORN_PARTITION_ADFS `Y' here, Linux will support disk partitions created under ADFS. config ACORN_PARTITION_POWERTEC - bool "PowerTec partition support" if PARTITION_ADVANCED && ACORN_PARTITION + bool "PowerTec partition support" if PARTITION_ADVANCED default y if ARCH_ACORN + depends on ACORN_PARTITION help Support reading partition tables created on Acorn machines using the PowerTec SCSI drive. config ACORN_PARTITION_RISCIX - bool "RISCiX partition support" if PARTITION_ADVANCED && ACORN_PARTITION + bool "RISCiX partition support" if PARTITION_ADVANCED default y if ARCH_ACORN + depends on ACORN_PARTITION help Once upon a time, there was a native Unix port for the Acorn series of machines called RISCiX. If you say 'Y' here, Linux will be able @@ -224,5 +230,3 @@ config EFI_PARTITION Say Y here if you would like to use hard disks under Linux which were partitioned using EFI GPT. Presently only useful on the IA-64 platform. - -# define_bool CONFIG_ACORN_PARTITION_CUMANA y diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h new file mode 100644 index 00000000000..58f40931a5c --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -0,0 +1,261 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Common definitions. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_H +#define AT91RM9200_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripheral */ +#define AT91_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91_ID_US0 6 /* USART 0 */ +#define AT91_ID_US1 7 /* USART 1 */ +#define AT91_ID_US2 8 /* USART 2 */ +#define AT91_ID_US3 9 /* USART 3 */ +#define AT91_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91_ID_UDP 11 /* USB Device Port */ +#define AT91_ID_TWI 12 /* Two-Wire Interface */ +#define AT91_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91_ID_TC0 17 /* Timer Counter 0 */ +#define AT91_ID_TC1 18 /* Timer Counter 1 */ +#define AT91_ID_TC2 19 /* Timer Counter 2 */ +#define AT91_ID_TC3 20 /* Timer Counter 3 */ +#define AT91_ID_TC4 21 /* Timer Counter 4 */ +#define AT91_ID_TC5 22 /* Timer Counter 5 */ +#define AT91_ID_UHP 23 /* USB Host port */ +#define AT91_ID_EMAC 24 /* Ethernet MAC */ +#define AT91_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ +#define AT91_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ +#define AT91_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ +#define AT91_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ +#define AT91_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ + + +/* + * Peripheral physical base addresses. + */ +#define AT91_BASE_TCB0 0xfffa0000 +#define AT91_BASE_TC0 0xfffa0000 +#define AT91_BASE_TC1 0xfffa0040 +#define AT91_BASE_TC2 0xfffa0080 +#define AT91_BASE_TCB1 0xfffa4000 +#define AT91_BASE_TC3 0xfffa4000 +#define AT91_BASE_TC4 0xfffa4040 +#define AT91_BASE_TC5 0xfffa4080 +#define AT91_BASE_UDP 0xfffb0000 +#define AT91_BASE_MCI 0xfffb4000 +#define AT91_BASE_TWI 0xfffb8000 +#define AT91_BASE_EMAC 0xfffbc000 +#define AT91_BASE_US0 0xfffc0000 +#define AT91_BASE_US1 0xfffc4000 +#define AT91_BASE_US2 0xfffc8000 +#define AT91_BASE_US3 0xfffcc000 +#define AT91_BASE_SSC0 0xfffd0000 +#define AT91_BASE_SSC1 0xfffd4000 +#define AT91_BASE_SSC2 0xfffd8000 +#define AT91_BASE_SPI 0xfffe0000 +#define AT91_BASE_SYS 0xfffff000 + + +/* + * PIO pin definitions (peripheral A/B multiplexing). + */ +#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */ +#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */ +#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */ +#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */ +#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */ +#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */ +#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */ +#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */ +#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */ +#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */ +#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */ +#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */ +#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */ +#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */ +#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */ +#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */ +#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */ +#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */ +#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */ +#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */ +#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */ +#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */ +#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */ +#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */ +#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */ +#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */ +#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */ +#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */ +#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */ +#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */ +#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */ +#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */ +#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */ +#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */ +#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */ +#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */ +#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */ +#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */ +#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */ +#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */ +#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */ +#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */ +#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */ +#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */ +#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */ +#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */ +#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */ +#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */ +#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */ +#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */ +#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */ +#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */ +#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */ +#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */ +#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */ +#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */ +#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */ +#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */ +#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */ +#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */ +#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */ +#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */ +#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */ + +#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */ +#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */ +#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */ +#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */ +#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */ +#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */ +#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */ +#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */ +#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */ +#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */ +#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */ +#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */ +#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */ +#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */ +#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */ +#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */ +#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */ +#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */ +#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */ +#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */ +#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */ +#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */ +#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */ +#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */ +#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */ +#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */ +#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */ +#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */ +#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */ +#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */ +#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */ +#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */ +#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */ +#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */ +#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */ +#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */ +#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */ +#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */ +#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */ +#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */ +#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */ +#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */ +#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */ +#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */ +#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */ +#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */ +#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */ +#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */ +#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */ +#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */ +#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */ + +#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */ +#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */ +#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */ +#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */ +#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */ +#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */ +#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */ +#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */ +#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */ +#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */ +#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */ +#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */ +#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */ +#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */ + +#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */ +#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */ +#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */ +#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */ +#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */ +#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */ +#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */ +#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */ +#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */ +#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */ +#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */ +#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */ +#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */ +#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */ +#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */ +#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */ +#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */ +#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */ +#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */ +#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */ +#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */ +#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */ +#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */ +#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */ +#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */ +#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */ +#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */ +#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */ +#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */ +#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */ +#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */ +#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */ +#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */ +#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */ +#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */ +#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */ +#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */ +#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */ +#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */ +#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */ +#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */ +#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h new file mode 100644 index 00000000000..9bfffdbf1e0 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h @@ -0,0 +1,328 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_sys.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SYS_H +#define AT91RM9200_SYS_H + +/* + * Advanced Interrupt Controller. + */ +#define AT91_AIC 0x000 + +#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ +#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ +#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ +#define AT91_AIC_SRCTYPE_LOW (0 << 5) +#define AT91_AIC_SRCTYPE_FALLING (1 << 5) +#define AT91_AIC_SRCTYPE_HIGH (2 << 5) +#define AT91_AIC_SRCTYPE_RISING (3 << 5) + +#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ +#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ +#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ +#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ + +#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ +#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ +#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ +#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ +#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ + +#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ +#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ +#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ +#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ +#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ +#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ +#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ +#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ +#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ + + +/* + * Debug Unit. + */ +#define AT91_DBGU 0x200 + +#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ +#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ +#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ +#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ +#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ +#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ +#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ +#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ +#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ +#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ +#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ +#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ + + +/* + * PIO Controllers. + */ +#define AT91_PIOA 0x400 +#define AT91_PIOB 0x600 +#define AT91_PIOC 0x800 +#define AT91_PIOD 0xa00 + +#define PIO_PER 0x00 /* Enable Register */ +#define PIO_PDR 0x04 /* Disable Register */ +#define PIO_PSR 0x08 /* Status Register */ +#define PIO_OER 0x10 /* Output Enable Register */ +#define PIO_ODR 0x14 /* Output Disable Register */ +#define PIO_OSR 0x18 /* Output Status Register */ +#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ +#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ +#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ +#define PIO_SODR 0x30 /* Set Output Data Register */ +#define PIO_CODR 0x34 /* Clear Output Data Register */ +#define PIO_ODSR 0x38 /* Output Data Status Register */ +#define PIO_PDSR 0x3c /* Pin Data Status Register */ +#define PIO_IER 0x40 /* Interrupt Enable Register */ +#define PIO_IDR 0x44 /* Interrupt Disable Register */ +#define PIO_IMR 0x48 /* Interrupt Mask Register */ +#define PIO_ISR 0x4c /* Interrupt Status Register */ +#define PIO_MDER 0x50 /* Multi-driver Enable Register */ +#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ +#define PIO_MDSR 0x58 /* Multi-driver Status Register */ +#define PIO_PUDR 0x60 /* Pull-up Disable Register */ +#define PIO_PUER 0x64 /* Pull-up Enable Register */ +#define PIO_PUSR 0x68 /* Pull-up Status Register */ +#define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_OWER 0xa0 /* Output Write Enable Register */ +#define PIO_OWDR 0xa4 /* Output Write Disable Register */ +#define PIO_OWSR 0xa8 /* Output Write Status Register */ + +#define AT91_PIO_P(n) (1 << (n)) + + +/* + * Power Management Controller. + */ +#define AT91_PMC 0xc00 + +#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ +#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ + +#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91_PMC_UDP (1 << 1) /* USB Devcice Port Clock */ +#define AT91_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend */ +#define AT91_PMC_UHP (1 << 4) /* USB Host Port Clock */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ + +#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ + +#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ +#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_2 (1 << 2) +#define AT91_PMC_PRES_4 (2 << 2) +#define AT91_PMC_PRES_8 (3 << 2) +#define AT91_PMC_PRES_16 (4 << 2) +#define AT91_PMC_PRES_32 (5 << 2) +#define AT91_PMC_PRES_64 (6 << 2) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91_PMC_MDIV_1 (0 << 8) +#define AT91_PMC_MDIV_2 (1 << 8) +#define AT91_PMC_MDIV_3 (2 << 8) +#define AT91_PMC_MDIV_4 (3 << 8) + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ +#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ +#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ +#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ + + +/* + * System Timer. + */ +#define AT91_ST 0xd00 + +#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ +#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ +#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ +#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ +#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ +#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ +#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ +#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ +#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ +#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ +#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ +#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ +#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ +#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ +#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ +#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ +#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ +#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ +#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ +#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ +#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ +#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ + + +/* + * Real-time Clock. + */ +#define AT91_RTC 0xe00 + +#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ +#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ +#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ +#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ +#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) +#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) +#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) +#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) +#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ +#define AT91_RTC_CALEVSEL_WEEK (0 << 16) +#define AT91_RTC_CALEVSEL_MONTH (1 << 16) +#define AT91_RTC_CALEVSEL_YEAR (2 << 16) + +#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ +#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ + +#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ +#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ +#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ +#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ +#define At91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ + +#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ +#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ +#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ +#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ +#define AT91_RTC_DAY (7 << 21) /* Current Day */ +#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ + +#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ +#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ +#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ +#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ + +#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ +#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ +#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ + +#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ +#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ +#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ +#define AT91_RTC_SECEV (1 << 2) /* Second Event */ +#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ +#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ + +#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ +#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ +#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ +#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ + +#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ +#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ +#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ +#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ +#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ + + +/* + * Memory Controller. + */ +#define AT91_MC 0xf00 + +#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ +#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ + +#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ +#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ +#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ + +/* External Bus Interface (EBI) registers */ +#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ +#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ +#define AT91_EBI_CS0A_SMC (0 << 0) +#define AT91_EBI_CS0A_BFC (1 << 0) +#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_EBI_CS1A_SMC (0 << 1) +#define AT91_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ +#define AT91_EBI_CS3A_SMC (0 << 3) +#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ +#define AT91_EBI_CS4A_SMC (0 << 4) +#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) +#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ +#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ + +/* Static Memory Controller (SMC) registers */ +#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ +#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ +#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ +#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ +#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ +#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ +#define AT91_SMC_DBW_16 (1 << 13) +#define AT91_SMC_DBW_8 (2 << 13) +#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ +#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ +#define AT91_SMC_ACSS_STD (0 << 16) +#define AT91_SMC_ACSS_1 (1 << 16) +#define AT91_SMC_ACSS_2 (2 << 16) +#define AT91_SMC_ACSS_3 (3 << 16) +#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ +#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ + + +#endif diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h new file mode 100644 index 00000000000..2e7d1139a79 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -0,0 +1,80 @@ +/* + * include/asm-arm/arch-at91rm9200/board.h + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * These are data structures found in platform_device.dev.platform_data, + * and describing board-specfic data needed by drivers. For example, + * which pin is used for a given GPIO role. + * + * In 2.6, drivers should strongly avoid board-specific knowledge so + * that supporting new boards normally won't require driver patches. + * Most board-specific knowledge should be in arch/.../board-*.c files. + */ + +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + + /* Clocks */ +extern unsigned long at91_master_clock; + + /* Serial Port */ +extern int at91_serial_map[AT91_NR_UART]; +extern int at91_console_port; + + /* USB Device */ +struct at91_udc_data { + u8 vbus_pin; /* high == host powering us */ + u8 pullup_pin; /* high == D+ pulled up */ +}; +extern void __init at91_add_device_udc(struct at91_udc_data *data); + + /* Compact Flash */ +struct at91_cf_data { + u8 irq_pin; /* I/O IRQ */ + u8 det_pin; /* Card detect */ + u8 vcc_pin; /* power switching */ + u8 rst_pin; /* card reset */ +}; +extern void __init at91_add_device_cf(struct at91_cf_data *data); + + /* MMC / SD */ +struct at91_mmc_data { + u8 det_pin; /* card detect IRQ */ + unsigned is_b:1; /* uses B side (vs A) */ + unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ + u8 wp_pin; /* (SD) writeprotect detect */ + u8 vcc_pin; /* power switching (high == on) */ +}; +extern void __init at91_add_device_mmc(struct at91_mmc_data *data); + + /* Ethernet */ +struct at91_eth_data { + u8 phy_irq_pin; /* PHY IRQ */ + u8 is_rmii; /* using RMII interface? */ +}; +extern void __init at91_add_device_eth(struct at91_eth_data *data); + + /* USB Host */ +struct at91_usbh_data { + u8 ports; /* number of ports on root hub */ +}; +extern void __init at91_add_device_usbh(struct at91_usbh_data *data); + +#endif diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S new file mode 100644 index 00000000000..f496b54c4c3 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/debug-macro.S @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-at91rm9200/debug-macro.S + * + * Copyright (C) 2003-2005 SAN People + * + * Debugging macro include header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <asm/hardware.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address) + ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address) + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register + tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register + tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete + beq 1001b + .endm + diff --git a/include/asm-arm/arch-epxa10db/param.h b/include/asm-arm/arch-at91rm9200/dma.h index 783dedd71c8..22c1dfdd8da 100644 --- a/include/asm-arm/arch-epxa10db/param.h +++ b/include/asm-arm/arch-at91rm9200/dma.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-epxa10db/param.h + * include/asm-arm/arch-at91rm9200/dma.h * - * Copyright (C) 1999 ARM Limited + * Copyright (C) 2003 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S new file mode 100644 index 00000000000..61a326e9490 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/entry-macro.S @@ -0,0 +1,25 @@ +/* + * include/asm-arm/arch-at91rm9200/entry-macro.S + * + * Copyright (C) 2003-2005 SAN People + * + * Low-level IRQ helper macros for AT91RM9200 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/hardware.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals + ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) + ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number + teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt + streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. + .endm + diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h new file mode 100644 index 00000000000..0f0a61e2f12 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -0,0 +1,193 @@ +/* + * include/asm-arm/arch-at91rm9200/gpio.h + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_AT91RM9200_GPIO_H +#define __ASM_ARCH_AT91RM9200_GPIO_H + +#define PIN_BASE NR_AIC_IRQS + +#define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ +#define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */ + +/* these pin numbers double as IRQ numbers, like AT91_ID_* values */ + +#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) +#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) +#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) +#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) +#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) + +#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) +#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) +#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) +#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) +#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) + +#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) +#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) +#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) +#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) +#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) + +#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) +#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) +#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) +#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) +#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) + +#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) +#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) +#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) +#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) +#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) + +#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) +#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) +#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) +#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) +#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) + +#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) +#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) + +#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) +#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) +#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) +#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) +#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) + +#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) +#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) +#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) +#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) +#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) + +#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) +#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) +#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) +#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) +#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) + +#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) +#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) +#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) +#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) +#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) + +#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) +#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) +#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) +#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) +#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) + +#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) +#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) +#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) +#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) +#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) + +#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) +#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) + +#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) +#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) +#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) +#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) +#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) + +#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) +#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) +#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) +#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) +#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) + +#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) +#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) +#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) +#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) +#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) + +#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) +#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) +#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) +#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) +#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) + +#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) +#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) +#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) +#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) +#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) + +#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) +#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) +#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) +#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) +#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) + +#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) +#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) + +#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) +#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) +#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) +#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) +#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) + +#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) +#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) +#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) +#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) +#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) + +#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) +#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) +#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) +#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) +#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) + +#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) +#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) +#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) +#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) +#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) + +#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) +#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) +#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) +#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) +#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) + +#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) +#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) +#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) +#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) +#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) + +#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) +#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) + +#ifndef __ASSEMBLY__ +/* setup setup routines, called from board init or driver probe() */ +extern int at91_set_A_periph(unsigned pin, int use_pullup); +extern int at91_set_B_periph(unsigned pin, int use_pullup); +extern int at91_set_gpio_input(unsigned pin, int use_pullup); +extern int at91_set_gpio_output(unsigned pin, int value); +extern int at91_set_deglitch(unsigned pin, int is_on); + +/* callable at any time */ +extern int at91_set_gpio_value(unsigned pin, int value); +extern int at91_get_gpio_value(unsigned pin); +#endif + +#endif + diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h new file mode 100644 index 00000000000..2646c01f8e9 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -0,0 +1,92 @@ +/* + * include/asm-arm/arch-at91rm9200/hardware.h + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> + +#include <asm/arch/at91rm9200.h> +#include <asm/arch/at91rm9200_sys.h> + +/* + * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF + * to 0xFEFA0000 .. 0xFF000000. (384Kb) + */ +#define AT91_IO_PHYS_BASE 0xFFFA0000 +#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) +#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) + + /* Convert a physical IO address to virtual IO address */ +#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) + +/* + * Virtual to Physical Address mapping for IO devices. + */ +#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) +#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91_BASE_SPI) +#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91_BASE_SSC2) +#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91_BASE_SSC1) +#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91_BASE_SSC0) +#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91_BASE_US3) +#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91_BASE_US2) +#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91_BASE_US1) +#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91_BASE_US0) +#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91_BASE_EMAC) +#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91_BASE_TWI) +#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91_BASE_MCI) +#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91_BASE_UDP) +#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91_BASE_TCB1) +#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) + +/* Internal SRAM */ +#define AT91_BASE_SRAM 0x00200000 /* Internal SRAM base address */ +#define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ + +/* Serial ports */ +#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ + +/* FLASH */ +#define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ + +/* SDRAM */ +#define AT91_SDRAM_BASE 0x20000000 /* NCS1: SDRAM physical base address */ + +/* SmartMedia */ +#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3: Smartmedia physical base address */ + +/* Multi-Master Memory controller */ +#define AT91_UHP_BASE 0x00300000 /* USB Host controller */ + +/* Clocks */ +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#ifndef __ASSEMBLY__ +#include <asm/io.h> + +static inline unsigned int at91_sys_read(unsigned int reg_offset) +{ + void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; + + return readl(addr + reg_offset); +} + +static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) +{ + void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; + + writel(value, addr + reg_offset); +} +#endif + +#endif diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h new file mode 100644 index 00000000000..23e670d85c9 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/io.h @@ -0,0 +1,33 @@ +/* + * include/asm-arm/arch-at91rm9200/io.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <asm/arch/at91rm9200.h> +#include <asm/io.h> + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + + +#endif diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h new file mode 100644 index 00000000000..27b0497f1b3 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -0,0 +1,52 @@ +/* + * include/asm-arm/arch-at91rm9200/irqs.h + * + * Copyright (C) 2004 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define NR_AIC_IRQS 32 + + +/* + * Acknowledge interrupt with AIC after interrupt has been handled. + * (by kernel/irq.c) + */ +#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0) + + +/* + * IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h + * for IRQs handled directly through the AIC, or else the AT91_PIN_* + * symbols in gpio.h for ones handled indirectly as GPIOs. + * We make provision for 4 banks of GPIO. + */ +#include <asm/arch/gpio.h> + +#define NR_IRQS (NR_AIC_IRQS + (4 * 32)) + + +#ifndef __ASSEMBLY__ +/* + * Initialize the IRQ controller. + */ +extern void at91rm9200_init_irq(unsigned int priority[]); +#endif + +#endif diff --git a/include/asm-arm/arch-epxa10db/memory.h b/include/asm-arm/arch-at91rm9200/memory.h index 999541b6a9f..462f1f0ad67 100644 --- a/include/asm-arm/arch-epxa10db/memory.h +++ b/include/asm-arm/arch-at91rm9200/memory.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-epxa10/memory.h + * include/asm-arm/arch-at91rm9200/memory.h * - * Copyright (C) 2001 Altera Corporation + * Copyright (C) 2004 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,13 +17,14 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ + #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) +#include <asm/arch/hardware.h> + +#define PHYS_OFFSET (AT91_SDRAM_BASE) + /* * Virtual view <-> DMA view memory address translations @@ -32,7 +33,9 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0) -#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET) +#define __virt_to_bus__is_a_macro +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt__is_a_macro +#define __bus_to_virt(x) __phys_to_virt(x) #endif diff --git a/include/asm-arm/arch-epxa10db/vmalloc.h b/include/asm-arm/arch-at91rm9200/param.h index 546fb7d2b6a..9480f844685 100644 --- a/include/asm-arm/arch-epxa10db/vmalloc.h +++ b/include/asm-arm/arch-at91rm9200/param.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-epxa10db/vmalloc.h + * include/asm-arm/arch-at91rm9200/param.h * - * Copyright (C) 2000 Russell King. + * Copyright (C) 2003 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,4 +17,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + +#ifndef __ASM_ARCH_PARAM_H +#define __ASM_ARCH_PARAM_H + +/* + * We use default params + */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/pio.h b/include/asm-arm/arch-at91rm9200/pio.h new file mode 100644 index 00000000000..a89501b4a70 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/pio.h @@ -0,0 +1,115 @@ +/* + * include/asm-arm/arch-at91rm9200/pio.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_PIO_H +#define __ASM_ARCH_PIO_H + +#include <asm/arch/hardware.h> + +static inline void AT91_CfgPIO_USART0(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA17_TXD0 | AT91_PA18_RXD0 | AT91_PA20_CTS0); + + /* + * Errata #39 - RTS0 is not internally connected to PA21. We need to drive + * the pin manually. Default is off (RTS is active low). + */ + at91_sys_write(AT91_PIOA + PIO_PER, AT91_PA21_RTS0); + at91_sys_write(AT91_PIOA + PIO_OER, AT91_PA21_RTS0); + at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); +} + +static inline void AT91_CfgPIO_USART1(void) { + at91_sys_write(AT91_PIOB + PIO_PDR, AT91_PB18_RI1 | AT91_PB19_DTR1 + | AT91_PB20_TXD1 | AT91_PB21_RXD1 | AT91_PB23_DCD1 + | AT91_PB24_CTS1 | AT91_PB25_DSR1 | AT91_PB26_RTS1); +} + +static inline void AT91_CfgPIO_USART2(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA22_RXD2 | AT91_PA23_TXD2); +} + +static inline void AT91_CfgPIO_USART3(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_TXD3 | AT91_PA6_RXD3); + at91_sys_write(AT91_PIOA + PIO_BSR, AT91_PA5_TXD3 | AT91_PA6_RXD3); +} + +static inline void AT91_CfgPIO_DBGU(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA31_DTXD | AT91_PA30_DRXD); +} + +/* + * Enable the Two-Wire interface. + */ +static inline void AT91_CfgPIO_TWI(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA25_TWD | AT91_PA26_TWCK); + at91_sys_write(AT91_PIOA + PIO_ASR, AT91_PA25_TWD | AT91_PA26_TWCK); + at91_sys_write(AT91_PIOA + PIO_MDER, AT91_PA25_TWD | AT91_PA26_TWCK); /* open drain */ +} + +/* + * Enable the Serial Peripheral Interface. + */ +static inline void AT91_CfgPIO_SPI(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA0_MISO | AT91_PA1_MOSI | AT91_PA2_SPCK); +} + +static inline void AT91_CfgPIO_SPI_CS0(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA3_NPCS0); +} + +static inline void AT91_CfgPIO_SPI_CS1(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA4_NPCS1); +} + +static inline void AT91_CfgPIO_SPI_CS2(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_NPCS2); +} + +static inline void AT91_CfgPIO_SPI_CS3(void) { + at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA6_NPCS3); +} + +/* + * Select the DataFlash card. + */ +static inline void AT91_CfgPIO_DataFlashCard(void) { + at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(7)); + at91_sys_write(AT91_PIOB + PIO_OER, AT91_PIO_P(7)); + at91_sys_write(AT91_PIOB + PIO_CODR, AT91_PIO_P(7)); +} + +/* + * Enable NAND Flash (SmartMedia) interface. + */ +static inline void AT91_CfgPIO_SmartMedia(void) { + /* enable PC0=SMCE, PC1=SMOE, PC3=SMWE, A21=CLE, A22=ALE */ + at91_sys_write(AT91_PIOC + PIO_ASR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE); + at91_sys_write(AT91_PIOC + PIO_PDR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE); + + /* Configure PC2 as input (signal READY of the SmartMedia) */ + at91_sys_write(AT91_PIOC + PIO_PER, AT91_PC2_BFAVD); /* enable direct output enable */ + at91_sys_write(AT91_PIOC + PIO_ODR, AT91_PC2_BFAVD); /* disable output */ + + /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ + at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(1)); /* enable direct output enable */ + at91_sys_write(AT91_PIOB + PIO_ODR, AT91_PIO_P(1)); /* disable output */ +} + +static inline int AT91_PIO_SmartMedia_RDY(void) { + return (at91_sys_read(AT91_PIOC + PIO_PDSR) & AT91_PIO_P(2)) ? 1 : 0; +} + +static inline int AT91_PIO_SmartMedia_CardDetect(void) { + return (at91_sys_read(AT91_PIOB + PIO_PDSR) & AT91_PIO_P(1)) ? 1 : 0; +} + +#endif diff --git a/include/asm-arm/arch-epxa10db/system.h b/include/asm-arm/arch-at91rm9200/system.h index 345b092a1ed..29c42655f05 100644 --- a/include/asm-arm/arch-epxa10db/system.h +++ b/include/asm-arm/arch-at91rm9200/system.h @@ -1,9 +1,7 @@ /* - * linux/include/asm-arm/arch-epxa10db/system.h + * include/asm-arm/arch-at91rm9200/system.h * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2001 Altera Corporation + * Copyright (C) 2003 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,23 +17,35 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ + #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <asm/arch/platform.h> +#include <asm/arch/hardware.h> static inline void arch_idle(void) { /* - * This should do all the clock switching - * and wait for interrupt tricks + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ +// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + + /* + * Set the processor (CP15) into 'Wait for Interrupt' mode. + * Unlike disabling the processor clock via the PMC (above) + * this allows the processor to be woken via JTAG. */ cpu_do_idle(); } -extern __inline__ void arch_reset(char mode) +static inline void arch_reset(char mode) { - /* Hmm... We can probably do something with the watchdog... */ + /* + * Perform a hardware reset with the use of the Watchdog timer. + */ + at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); + at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } #endif diff --git a/include/asm-arm/arch-epxa10db/dma.h b/include/asm-arm/arch-at91rm9200/timex.h index de20ec8e74b..3f112dd1258 100644 --- a/include/asm-arm/arch-epxa10db/dma.h +++ b/include/asm-arm/arch-at91rm9200/timex.h @@ -1,7 +1,7 @@ /* - * linux/include/asm-arm/arch-camelot/dma.h + * include/asm-arm/arch-at91rm9200/timex.h * - * Copyright (C) 1997,1998 Russell King + * Copyright (C) 2003 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,3 +17,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#include <asm/arch/hardware.h> + +#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) + +#endif diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h new file mode 100644 index 00000000000..b30dd552071 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -0,0 +1,55 @@ +/* + * include/asm-arm/arch-at91rm9200/uncompress.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <asm/arch/hardware.h> + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ +static void putstr(const char *s) +{ + void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ + + while (*s) { + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); } + __raw_writel(*s, sys + AT91_DBGU_THR); + if (*s == '\n') { + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); } + __raw_writel('\r', sys + AT91_DBGU_THR); + } + s++; + } + /* wait for transmission to complete */ + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) { barrier(); } +} + +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif diff --git a/include/asm-arm/arch-epxa10db/timex.h b/include/asm-arm/arch-at91rm9200/vmalloc.h index b87a75fc958..34d9718feb9 100644 --- a/include/asm-arm/arch-epxa10db/timex.h +++ b/include/asm-arm/arch-at91rm9200/vmalloc.h @@ -1,9 +1,7 @@ /* - * linux/include/asm-arm/arch-epxa10db/timex.h + * include/asm-arm/arch-at91rm9200/vmalloc.h * - * Excalibur timex specifications - * - * Copyright (C) 2001 Altera Corporation + * Copyright (C) 2003 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,7 +18,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (AT91_IO_VIRT_BASE & PGDIR_MASK) + +#endif diff --git a/include/asm-arm/arch-epxa10db/debug-macro.S b/include/asm-arm/arch-epxa10db/debug-macro.S deleted file mode 100644 index 1d11c51f498..00000000000 --- a/include/asm-arm/arch-epxa10db/debug-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* linux/include/asm-arm/arch-epxa10db/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <asm/arch/excalibur.h> -#define UART00_TYPE -#include <asm/arch/uart00.h> - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldr \rx, =EXC_UART00_BASE @ physical base address - orrne \rx, \rx, #0xff000000 @ virtual base - orrne \rx, \rx, #0x00f00000 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_TD(0)] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART_TSR(0)] - and \rd, \rd, #UART_TSR_TX_LEVEL_MSK - cmp \rd, #15 - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UART_TSR(0)] - ands \rd, \rd, #UART_TSR_TX_LEVEL_MSK - bne 1001b - .endm diff --git a/include/asm-arm/arch-epxa10db/entry-macro.S b/include/asm-arm/arch-epxa10db/entry-macro.S deleted file mode 100644 index de6ae08334e..00000000000 --- a/include/asm-arm/arch-epxa10db/entry-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-arm/arch-epxa10db/entry-macro.S - * - * Low-level IRQ helper macros for epxa10db platform - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <asm/arch/platform.h> -#undef IRQ_MODE /* same name defined in asm/proc/ptrace.h */ -#include <asm/arch/int_ctrl00.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, =INT_ID(IO_ADDRESS(EXC_INT_CTRL00_BASE)) - ldr \irqnr,[\irqstat] - cmp \irqnr,#0 - subne \irqnr,\irqnr,#1 - - .endm - diff --git a/include/asm-arm/arch-epxa10db/ether00.h b/include/asm-arm/arch-epxa10db/ether00.h deleted file mode 100644 index b737b8aabe2..00000000000 --- a/include/asm-arm/arch-epxa10db/ether00.h +++ /dev/null @@ -1,482 +0,0 @@ -#ifndef __ETHER00_H -#define __ETHER00_H - - - -/* - * Register definitions for the Ethernet MAC - */ - -/* - * Copyright (c) Altera Corporation 2000. - * All rights reserved. - */ - -/* -* Structures for the DMA controller -*/ -typedef struct fda_desc - { - struct fda_desc * FDNext; - long FDSystem; - long FDStat; - short FDLength; - short FDCtl; - }FDA_DESC; - -typedef struct buf_desc - { - char * BuffData; - short BuffLength; - char BDStat; - char BDCtl; - }BUF_DESC; - -/* -* Control masks for the DMA controller -*/ -#define FDCTL_BDCOUNT_MSK (0x1F) -#define FDCTL_BDCOUNT_OFST (0) -#define FDCTL_FRMOPT_MSK (0x7C00) -#define FDCTL_FRMOPT_OFST (10) -#define FDCTL_COWNSFD_MSK (0x8000) -#define FDCTL_COWNSFD_OFST (15) - -#define BDCTL_RXBDSEQN_MSK (0x7F) -#define BDCTL_RXBDSEQN_OFST (0) -#define BDCTL_COWNSBD_MSK (0x80) -#define BDCTL_COWNSBD_OFST (7) - -#define FDNEXT_EOL_MSK (0x1) -#define FDNEXT_EOL_OFST (0) -#define FDNEXT_EOL_POINTER_MSK (0xFFFFFFF0) -#define FDNEXT_EOL_POINTER_OFST (4) - -#define ETHER_ARC_SIZE (21) - -/* -* Register definitions and masks -*/ -#define ETHER_DMA_CTL(base) (ETHER00_TYPE (base + 0x100)) -#define ETHER_DMA_CTL_DMBURST_OFST (2) -#define ETHER_DMA_CTL_DMBURST_MSK (0x1FC) -#define ETHER_DMA_CTL_POWRMGMNT_OFST (11) -#define ETHER_DMA_CTL_POWRMGMNT_MSK (0x1000) -#define ETHER_DMA_CTL_TXBIGE_OFST (14) -#define ETHER_DMA_CTL_TXBIGE_MSK (0x4000) -#define ETHER_DMA_CTL_RXBIGE_OFST (15) -#define ETHER_DMA_CTL_RXBIGE_MSK (0x8000) -#define ETHER_DMA_CTL_TXWAKEUP_OFST (16) -#define ETHER_DMA_CTL_TXWAKEUP_MSK (0x10000) -#define ETHER_DMA_CTL_SWINTREQ_OFST (17) -#define ETHER_DMA_CTL_SWINTREQ_MSK (0x20000) -#define ETHER_DMA_CTL_INTMASK_OFST (18) -#define ETHER_DMA_CTL_INTMASK_MSK (0x40000) -#define ETHER_DMA_CTL_M66ENSTAT_OFST (19) -#define ETHER_DMA_CTL_M66ENSTAT_MSK (0x80000) -#define ETHER_DMA_CTL_RMTXINIT_OFST (20) -#define ETHER_DMA_CTL_RMTXINIT_MSK (0x100000) -#define ETHER_DMA_CTL_RMRXINIT_OFST (21) -#define ETHER_DMA_CTL_RMRXINIT_MSK (0x200000) -#define ETHER_DMA_CTL_RXALIGN_OFST (22) -#define ETHER_DMA_CTL_RXALIGN_MSK (0xC00000) -#define ETHER_DMA_CTL_RMSWRQ_OFST (24) -#define ETHER_DMA_CTL_RMSWRQ_MSK (0x1000000) -#define ETHER_DMA_CTL_RMEMBANK_OFST (25) -#define ETHER_DMA_CTL_RMEMBANK_MSK (0x2000000) - -#define ETHER_TXFRMPTR(base) (ETHER00_TYPE (base + 0x104)) - -#define ETHER_TXTHRSH(base) (ETHER00_TYPE (base + 0x308)) - -#define ETHER_TXPOLLCTR(base) (ETHER00_TYPE (base + 0x30c)) - -#define ETHER_BLFRMPTR(base) (ETHER00_TYPE (base + 0x110)) -#define ETHER_BLFFRMPTR_EOL_OFST (0) -#define ETHER_BLFFRMPTR_EOL_MSK (0x1) -#define ETHER_BLFFRMPTR_ADDRESS_OFST (4) -#define ETHER_BLFFRMPTR_ADDRESS_MSK (0xFFFFFFF0) - -#define ETHER_RXFRAGSIZE(base) (ETHER00_TYPE (base + 0x114)) -#define ETHER_RXFRAGSIZE_MINFRAG_OFST (2) -#define ETHER_RXFRAGSIZE_MINFRAG_MSK (0xFFC) -#define ETHER_RXFRAGSIZE_ENPACK_OFST (15) -#define ETHER_RXFRAGSIZE_ENPACK_MSK (0x8000) - -#define ETHER_INT_EN(base) (ETHER00_TYPE (base + 0x118)) -#define ETHER_INT_EN_FDAEXEN_OFST (0) -#define ETHER_INT_EN_FDAEXEN_MSK (0x1) -#define ETHER_INT_EN_BLEXEN_OFST (1) -#define ETHER_INT_EN_BLEXN_MSK (0x2) -#define ETHER_INT_EN_STARGABTEN_OFST (2) -#define ETHER_INT_EN_STARGABTEN_MSK (0x4) -#define ETHER_INT_EN_RTARGABTEN_OFST (3) -#define ETHER_INT_EN_RTARGABTEN_MSK (0x8) -#define ETHER_INT_EN_RMASABTEN_OFST (4) -#define ETHER_INT_EN_RMASABTEN_MSK (0x10) -#define ETHER_INT_EN_SSYSERREN_OFST (5) -#define ETHER_INT_EN_SSYSERREN_MSK (0x20) -#define ETHER_INT_EN_DPARERREN_OFST (6) -#define ETHER_INT_EN_DPARERREN_MSK (0x40) -#define ETHER_INT_EN_EARNOTEN_OFST (7) -#define ETHER_INT_EN_EARNOTEN_MSK (0x80) -#define ETHER_INT_EN_DPARDEN_OFST (8) -#define ETHER_INT_EN_DPARDEN_MSK (0x100) -#define ETHER_INT_EN_DMPARERREN_OFST (9) -#define ETHER_INT_EN_DMPARERREN_MSK (0x200) -#define ETHER_INT_EN_TXCTLCMPEN_OFST (10) -#define ETHER_INT_EN_TXCTLCMPEN_MSK (0x400) -#define ETHER_INT_EN_NRABTEN_OFST (11) -#define ETHER_INT_EN_NRABTEN_MSK (0x800) - -#define ETHER_FDA_BAS(base) (ETHER00_TYPE (base + 0x11C)) -#define ETHER_FDA_BAS_ADDRESS_OFST (4) -#define ETHER_FDA_BAS_ADDRESS_MSK (0xFFFFFFF0) - -#define ETHER_FDA_LIM(base) (ETHER00_TYPE (base + 0x120)) -#define ETHER_FDA_LIM_COUNT_OFST (4) -#define ETHER_FDA_LIM_COUNT_MSK (0xFFF0) - -#define ETHER_INT_SRC(base) (ETHER00_TYPE (base + 0x124)) -#define ETHER_INT_SRC_INTMACTX_OFST (0) -#define ETHER_INT_SRC_INTMACTX_MSK (0x1) -#define ETHER_INT_SRC_INTMACRX_OFST (1) -#define ETHER_INT_SRC_INTMACRX_MSK (0x2) -#define ETHER_INT_SRC_INTSBUS_OFST (2) -#define ETHER_INT_SRC_INTSBUS_MSK (0x4) -#define ETHER_INT_SRC_INTFDAEX_OFST (3) -#define ETHER_INT_SRC_INTFDAEX_MSK (0x8) -#define ETHER_INT_SRC_INTBLEX_OFST (4) -#define ETHER_INT_SRC_INTBLEX_MSK (0x10) -#define ETHER_INT_SRC_SWINT_OFST (5) -#define ETHER_INT_SRC_SWINT_MSK (0x20) -#define ETHER_INT_SRC_INTEARNOT_OFST (6) -#define ETHER_INT_SRC_INTEARNOT_MSK (0x40) -#define ETHER_INT_SRC_DMPARERR_OFST (7) -#define ETHER_INT_SRC_DMPARERR_MSK (0x80) -#define ETHER_INT_SRC_INTEXBD_OFST (8) -#define ETHER_INT_SRC_INTEXBD_MSK (0x100) -#define ETHER_INT_SRC_INTTXCTLCMP_OFST (9) -#define ETHER_INT_SRC_INTTXCTLCMP_MSK (0x200) -#define ETHER_INT_SRC_INTNRABT_OFST (10) -#define ETHER_INT_SRC_INTNRABT_MSK (0x400) -#define ETHER_INT_SRC_FDAEX_OFST (11) -#define ETHER_INT_SRC_FDAEX_MSK (0x800) -#define ETHER_INT_SRC_BLEX_OFST (12) -#define ETHER_INT_SRC_BLEX_MSK (0x1000) -#define ETHER_INT_SRC_DMPARERRSTAT_OFST (13) -#define ETHER_INT_SRC_DMPARERRSTAT_MSK (0x2000) -#define ETHER_INT_SRC_NRABT_OFST (14) -#define ETHER_INT_SRC_NRABT_MSK (0x4000) -#define ETHER_INT_SRC_INTLINK_OFST (15) -#define ETHER_INT_SRC_INTLINK_MSK (0x8000) -#define ETHER_INT_SRC_INTEXDEFER_OFST (16) -#define ETHER_INT_SRC_INTEXDEFER_MSK (0x10000) -#define ETHER_INT_SRC_INTRMON_OFST (17) -#define ETHER_INT_SRC_INTRMON_MSK (0x20000) -#define ETHER_INT_SRC_IRQ_MSK (0x83FF) - -#define ETHER_PAUSECNT(base) (ETHER00_TYPE (base + 0x40)) -#define ETHER_PAUSECNT_COUNT_OFST (0) -#define ETHER_PAUSECNT_COUNT_MSK (0xFFFF) - -#define ETHER_REMPAUCNT(base) (ETHER00_TYPE (base + 0x44)) -#define ETHER_REMPAUCNT_COUNT_OFST (0) -#define ETHER_REMPAUCNT_COUNT_MSK (0xFFFF) - -#define ETHER_TXCONFRMSTAT(base) (ETHER00_TYPE (base + 0x348)) -#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_OFST (0) -#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_MSK (0x3FFFFF) - -#define ETHER_MAC_CTL(base) (ETHER00_TYPE (base + 0)) -#define ETHER_MAC_CTL_HALTREQ_OFST (0) -#define ETHER_MAC_CTL_HALTREQ_MSK (0x1) -#define ETHER_MAC_CTL_HALTIMM_OFST (1) -#define ETHER_MAC_CTL_HALTIMM_MSK (0x2) -#define ETHER_MAC_CTL_RESET_OFST (2) -#define ETHER_MAC_CTL_RESET_MSK (0x4) -#define ETHER_MAC_CTL_FULLDUP_OFST (3) -#define ETHER_MAC_CTL_FULLDUP_MSK (0x8) -#define ETHER_MAC_CTL_MACLOOP_OFST (4) -#define ETHER_MAC_CTL_MACLOOP_MSK (0x10) -#define ETHER_MAC_CTL_CONN_OFST (5) -#define ETHER_MAC_CTL_CONN_MSK (0x60) -#define ETHER_MAC_CTL_LOOP10_OFST (7) -#define ETHER_MAC_CTL_LOOP10_MSK (0x80) -#define ETHER_MAC_CTL_LNKCHG_OFST (8) -#define ETHER_MAC_CTL_LNKCHG_MSK (0x100) -#define ETHER_MAC_CTL_MISSROLL_OFST (10) -#define ETHER_MAC_CTL_MISSROLL_MSK (0x400) -#define ETHER_MAC_CTL_ENMISSROLL_OFST (13) -#define ETHER_MAC_CTL_ENMISSROLL_MSK (0x2000) -#define ETHER_MAC_CTL_LINK10_OFST (15) -#define ETHER_MAC_CTL_LINK10_MSK (0x8000) - -#define ETHER_ARC_CTL(base) (ETHER00_TYPE (base + 0x4)) -#define ETHER_ARC_CTL_STATIONACC_OFST (0) -#define ETHER_ARC_CTL_STATIONACC_MSK (0x1) -#define ETHER_ARC_CTL_GROUPACC_OFST (1) -#define ETHER_ARC_CTL_GROUPACC_MSK (0x2) -#define ETHER_ARC_CTL_BROADACC_OFST (2) -#define ETHER_ARC_CTL_BROADACC_MSK (0x4) -#define ETHER_ARC_CTL_NEGARC_OFST (3) -#define ETHER_ARC_CTL_NEGARC_MSK (0x8) -#define ETHER_ARC_CTL_COMPEN_OFST (4) -#define ETHER_ARC_CTL_COMPEN_MSK (0x10) - -#define ETHER_TX_CTL(base) (ETHER00_TYPE (base + 0x8)) -#define ETHER_TX_CTL_TXEN_OFST (0) -#define ETHER_TX_CTL_TXEN_MSK (0x1) -#define ETHER_TX_CTL_TXHALT_OFST (1) -#define ETHER_TX_CTL_TXHALT_MSK (0x2) -#define ETHER_TX_CTL_NOPAD_OFST (2) -#define ETHER_TX_CTL_NOPAD_MSK (0x4) -#define ETHER_TX_CTL_NOCRC_OFST (3) -#define ETHER_TX_CTL_NOCRC_MSK (0x8) -#define ETHER_TX_CTL_FBACK_OFST (4) -#define ETHER_TX_CTL_FBACK_MSK (0x10) -#define ETHER_TX_CTL_NOEXDEF_OFST (5) -#define ETHER_TX_CTL_NOEXDEF_MSK (0x20) -#define ETHER_TX_CTL_SDPAUSE_OFST (6) -#define ETHER_TX_CTL_SDPAUSE_MSK (0x40) -#define ETHER_TX_CTL_MII10_OFST (7) -#define ETHER_TX_CTL_MII10_MSK (0x80) -#define ETHER_TX_CTL_ENUNDER_OFST (8) -#define ETHER_TX_CTL_ENUNDER_MSK (0x100) -#define ETHER_TX_CTL_ENEXDEFER_OFST (9) -#define ETHER_TX_CTL_ENEXDEFER_MSK (0x200) -#define ETHER_TX_CTL_ENLCARR_OFST (10) -#define ETHER_TX_CTL_ENLCARR_MSK (0x400) -#define ETHER_TX_CTL_ENEXCOLL_OFST (11) -#define ETHER_TX_CTL_ENEXCOLL_MSK (0x800) -#define ETHER_TX_CTL_ENLATECOLL_OFST (12) -#define ETHER_TX_CTL_ENLATECOLL_MSK (0x1000) -#define ETHER_TX_CTL_ENTXPAR_OFST (13) -#define ETHER_TX_CTL_ENTXPAR_MSK (0x2000) -#define ETHER_TX_CTL_ENCOMP_OFST (14) -#define ETHER_TX_CTL_ENCOMP_MSK (0x4000) - -#define ETHER_TX_STAT(base) (ETHER00_TYPE (base + 0xc)) -#define ETHER_TX_STAT_TXCOLL_OFST (0) -#define ETHER_TX_STAT_TXCOLL_MSK (0xF) -#define ETHER_TX_STAT_EXCOLL_OFST (4) -#define ETHER_TX_STAT_EXCOLL_MSK (0x10) -#define ETHER_TX_STAT_TXDEFER_OFST (5) -#define ETHER_TX_STAT_TXDEFER_MSK (0x20) -#define ETHER_TX_STAT_PAUSED_OFST (6) -#define ETHER_TX_STAT_PAUSED_MSK (0x40) -#define ETHER_TX_STAT_INTTX_OFST (7) -#define ETHER_TX_STAT_INTTX_MSK (0x80) -#define ETHER_TX_STAT_UNDER_OFST (8) -#define ETHER_TX_STAT_UNDER_MSK (0x100) -#define ETHER_TX_STAT_EXDEFER_OFST (9) -#define ETHER_TX_STAT_EXDEFER_MSK (0x200) -#define ETHER_TX_STAT_LCARR_OFST (10) -#define ETHER_TX_STAT_LCARR_MSK (0x400) -#define ETHER_TX_STAT_TX10STAT_OFST (11) -#define ETHER_TX_STAT_TX10STAT_MSK (0x800) -#define ETHER_TX_STAT_LATECOLL_OFST (12) -#define ETHER_TX_STAT_LATECOLL_MSK (0x1000) -#define ETHER_TX_STAT_TXPAR_OFST (13) -#define ETHER_TX_STAT_TXPAR_MSK (0x2000) -#define ETHER_TX_STAT_COMP_OFST (14) -#define ETHER_TX_STAT_COMP_MSK (0x4000) -#define ETHER_TX_STAT_TXHALTED_OFST (15) -#define ETHER_TX_STAT_TXHALTED_MSK (0x8000) -#define ETHER_TX_STAT_SQERR_OFST (16) -#define ETHER_TX_STAT_SQERR_MSK (0x10000) -#define ETHER_TX_STAT_TXMCAST_OFST (17) -#define ETHER_TX_STAT_TXMCAST_MSK (0x20000) -#define ETHER_TX_STAT_TXBCAST_OFST (18) -#define ETHER_TX_STAT_TXBCAST_MSK (0x40000) -#define ETHER_TX_STAT_VLAN_OFST (19) -#define ETHER_TX_STAT_VLAN_MSK (0x80000) -#define ETHER_TX_STAT_MACC_OFST (20) -#define ETHER_TX_STAT_MACC_MSK (0x100000) -#define ETHER_TX_STAT_TXPAUSE_OFST (21) -#define ETHER_TX_STAT_TXPAUSE_MSK (0x200000) - -#define ETHER_RX_CTL(base) (ETHER00_TYPE (base + 0x10)) -#define ETHER_RX_CTL_RXEN_OFST (0) -#define ETHER_RX_CTL_RXEN_MSK (0x1) -#define ETHER_RX_CTL_RXHALT_OFST (1) -#define ETHER_RX_CTL_RXHALT_MSK (0x2) -#define ETHER_RX_CTL_LONGEN_OFST (2) -#define ETHER_RX_CTL_LONGEN_MSK (0x4) -#define ETHER_RX_CTL_SHORTEN_OFST (3) -#define ETHER_RX_CTL_SHORTEN_MSK (0x8) -#define ETHER_RX_CTL_STRIPCRC_OFST (4) -#define ETHER_RX_CTL_STRIPCRC_MSK (0x10) -#define ETHER_RX_CTL_PASSCTL_OFST (5) -#define ETHER_RX_CTL_PASSCTL_MSK (0x20) -#define ETHER_RX_CTL_IGNORECRC_OFST (6) -#define ETHER_RX_CTL_IGNORECRC_MSK (0x40) -#define ETHER_RX_CTL_ENALIGN_OFST (8) -#define ETHER_RX_CTL_ENALIGN_MSK (0x100) -#define ETHER_RX_CTL_ENCRCERR_OFST (9) -#define ETHER_RX_CTL_ENCRCERR_MSK (0x200) -#define ETHER_RX_CTL_ENOVER_OFST (10) -#define ETHER_RX_CTL_ENOVER_MSK (0x400) -#define ETHER_RX_CTL_ENLONGERR_OFST (11) -#define ETHER_RX_CTL_ENLONGERR_MSK (0x800) -#define ETHER_RX_CTL_ENRXPAR_OFST (13) -#define ETHER_RX_CTL_ENRXPAR_MSK (0x2000) -#define ETHER_RX_CTL_ENGOOD_OFST (14) -#define ETHER_RX_CTL_ENGOOD_MSK (0x4000) - -#define ETHER_RX_STAT(base) (ETHER00_TYPE (base + 0x14)) -#define ETHER_RX_STAT_LENERR_OFST (4) -#define ETHER_RX_STAT_LENERR_MSK (0x10) -#define ETHER_RX_STAT_CTLRECD_OFST (5) -#define ETHER_RX_STAT_CTLRECD_MSK (0x20) -#define ETHER_RX_STAT_INTRX_OFST (6) -#define ETHER_RX_STAT_INTRX_MSK (0x40) -#define ETHER_RX_STAT_RX10STAT_OFST (7) -#define ETHER_RX_STAT_RX10STAT_MSK (0x80) -#define ETHER_RX_STAT_ALIGNERR_OFST (8) -#define ETHER_RX_STAT_ALIGNERR_MSK (0x100) -#define ETHER_RX_STAT_CRCERR_OFST (9) -#define ETHER_RX_STAT_CRCERR_MSK (0x200) -#define ETHER_RX_STAT_OVERFLOW_OFST (10) -#define ETHER_RX_STAT_OVERFLOW_MSK (0x400) -#define ETHER_RX_STAT_LONGERR_OFST (11) -#define ETHER_RX_STAT_LONGERR_MSK (0x800) -#define ETHER_RX_STAT_RXPAR_OFST (13) -#define ETHER_RX_STAT_RXPAR_MSK (0x2000) -#define ETHER_RX_STAT_GOOD_OFST (14) -#define ETHER_RX_STAT_GOOD_MSK (0x4000) -#define ETHER_RX_STAT_RXHALTED_OFST (15) -#define ETHER_RX_STAT_RXHALTED_MSK (0x8000) -#define ETHER_RX_STAT_RXMCAST_OFST (17) -#define ETHER_RX_STAT_RXMCAST_MSK (0x10000) -#define ETHER_RX_STAT_RXBCAST_OFST (18) -#define ETHER_RX_STAT_RXBCAST_MSK (0x20000) -#define ETHER_RX_STAT_RXVLAN_OFST (19) -#define ETHER_RX_STAT_RXVLAN_MSK (0x40000) -#define ETHER_RX_STAT_RXPAUSE_OFST (20) -#define ETHER_RX_STAT_RXPAUSE_MSK (0x80000) -#define ETHER_RX_STAT_ARCSTATUS_OFST (21) -#define ETHER_RX_STAT_ARCSTATUS_MSK (0xF00000) -#define ETHER_RX_STAT_ARCENT_OFST (25) -#define ETHER_RX_STAT_ARCENT_MSK (0x1F000000) - -#define ETHER_MD_DATA(base) (ETHER00_TYPE (base + 0x18)) - -#define ETHER_MD_CA(base) (ETHER00_TYPE (base + 0x1c)) -#define ETHER_MD_CA_ADDR_OFST (0) -#define ETHER_MD_CA_ADDR_MSK (0x1F) -#define ETHER_MD_CA_PHY_OFST (5) -#define ETHER_MD_CA_PHY_MSK (0x3E0) -#define ETHER_MD_CA_WR_OFST (10) -#define ETHER_MD_CA_WR_MSK (0x400) -#define ETHER_MD_CA_BUSY_OFST (11) -#define ETHER_MD_CA_BUSY_MSK (0x800) -#define ETHER_MD_CA_PRESUPP_OFST (12) -#define ETHER_MD_CA_PRESUPP_MSK (0x1000) - -#define ETHER_ARC_ADR(base) (ETHER00_TYPE (base + 0x160)) -#define ETHER_ARC_ADR_ARC_LOC_OFST (2) -#define ETHER_ARC_ADR_ARC_LOC_MSK (0xFFC) - -#define ETHER_ARC_DATA(base) (ETHER00_TYPE (base + 0x364)) - -#define ETHER_ARC_ENA(base) (ETHER00_TYPE (base + 0x28)) -#define ETHER_ARC_ENA_MSK (0x1FFFFF) - -#define ETHER_PROM_CTL(base) (ETHER00_TYPE (base + 0x2c)) -#define ETHER_PROM_CTL_PROM_ADDR_OFST (0) -#define ETHER_PROM_CTL_PROM_ADDR_MSK (0x3F) -#define ETHER_PROM_CTL_OPCODE_OFST (13) -#define ETHER_PROM_CTL_OPCODE_MSK (0x6000) -#define ETHER_PROM_CTL_OPCODE_READ_MSK (0x4000) -#define ETHER_PROM_CTL_OPCODE_WRITE_MSK (0x2000) -#define ETHER_PROM_CTL_OPCODE_ERASE_MSK (0x6000) -#define ETHER_PROM_CTL_ENABLE_MSK (0x0030) -#define ETHER_PROM_CTL_DISABLE_MSK (0x0000) -#define ETHER_PROM_CTL_BUSY_OFST (15) -#define ETHER_PROM_CTL_BUSY_MSK (0x8000) - -#define ETHER_PROM_DATA(base) (ETHER00_TYPE (base + 0x30)) - -#define ETHER_MISS_CNT(base) (ETHER00_TYPE (base + 0x3c)) -#define ETHER_MISS_CNT_COUNT_OFST (0) -#define ETHER_MISS_CNT_COUNT_MSK (0xFFFF) - -#define ETHER_CNTDATA(base) (ETHER00_TYPE (base + 0x80)) - -#define ETHER_CNTACC(base) (ETHER00_TYPE (base + 0x84)) -#define ETHER_CNTACC_ADDR_OFST (0) -#define ETHER_CNTACC_ADDR_MSK (0xFF) -#define ETHER_CNTACC_WRRDN_OFST (8) -#define ETHER_CNTACC_WRRDN_MSK (0x100) -#define ETHER_CNTACC_CLEAR_OFST (9) -#define ETHER_CNTACC_CLEAR_MSK (0x200) - -#define ETHER_TXRMINTEN(base) (ETHER00_TYPE (base + 0x88)) -#define ETHER_TXRMINTEN_MSK (0x3FFFFFFF) - -#define ETHER_RXRMINTEN(base) (ETHER00_TYPE (base + 0x8C)) -#define ETHER_RXRMINTEN_MSK (0xFFFFFF) - -/* -* RMON Registers -*/ -#define RMON_COLLISION0 0x0 -#define RMON_COLLISION1 0x1 -#define RMON_COLLISION2 0x2 -#define RMON_COLLISION3 0x3 -#define RMON_COLLISION4 0x4 -#define RMON_COLLISION5 0x5 -#define RMON_COLLISION6 0x6 -#define RMON_COLLISION7 0x7 -#define RMON_COLLISION8 0x8 -#define RMON_COLLISION9 0x9 -#define RMON_COLLISION10 0xa -#define RMON_COLLISION11 0xb -#define RMON_COLLISION12 0xc -#define RMON_COLLISION13 0xd -#define RMON_COLLISION14 0xe -#define RMON_COLLISION15 0xf -#define RMON_COLLISION16 0x10 -#define RMON_FRAMES_WITH_DEFERRED_XMISSIONS 0x11 -#define RMON_LATE_COLLISIONS 0x12 -#define RMON_FRAMES_LOST_DUE_TO_MAC_XMIT 0x13 -#define RMON_CARRIER_SENSE_ERRORS 0x14 -#define RMON_FRAMES_WITH_EXCESSIVE_DEFERAL 0x15 -#define RMON_UNICAST_FRAMES_TRANSMITTED_OK 0x16 -#define RMON_MULTICAST_FRAMES_XMITTED_OK 0x17 -#define RMON_BROADCAST_FRAMES_XMITTED_OK 0x18 -#define RMON_SQE_TEST_ERRORS 0x19 -#define RMON_PAUSE_MACCTRL_FRAMES_XMITTED 0x1A -#define RMON_MACCTRL_FRAMES_XMITTED 0x1B -#define RMON_VLAN_FRAMES_XMITTED 0x1C -#define RMON_OCTETS_XMITTED_OK 0x1D -#define RMON_OCTETS_XMITTED_OK_HI 0x1E - -#define RMON_RX_PACKET_SIZES0 0x40 -#define RMON_RX_PACKET_SIZES1 0x41 -#define RMON_RX_PACKET_SIZES2 0x42 -#define RMON_RX_PACKET_SIZES3 0x43 -#define RMON_RX_PACKET_SIZES4 0x44 -#define RMON_RX_PACKET_SIZES5 0x45 -#define RMON_RX_PACKET_SIZES6 0x46 -#define RMON_RX_PACKET_SIZES7 0x47 -#define RMON_FRAME_CHECK_SEQUENCE_ERRORS 0x48 -#define RMON_ALIGNMENT_ERRORS 0x49 -#define RMON_FRAGMENTS 0x4A -#define RMON_JABBERS 0x4B -#define RMON_FRAMES_LOST_TO_INTMACRCVERR 0x4C -#define RMON_UNICAST_FRAMES_RCVD_OK 0x4D -#define RMON_MULTICAST_FRAMES_RCVD_OK 0x4E -#define RMON_BROADCAST_FRAMES_RCVD_OK 0x4F -#define RMON_IN_RANGE_LENGTH_ERRORS 0x50 -#define RMON_OUT_OF_RANGE_LENGTH_ERRORS 0x51 -#define RMON_VLAN_FRAMES_RCVD 0x52 -#define RMON_PAUSE_MAC_CTRL_FRAMES_RCVD 0x53 -#define RMON_MAC_CTRL_FRAMES_RCVD 0x54 -#define RMON_OCTETS_RCVD_OK 0x55 -#define RMON_OCTETS_RCVD_OK_HI 0x56 -#define RMON_OCTETS_RCVD_OTHER 0x57 -#define RMON_OCTETS_RCVD_OTHER_HI 0x58 - -#endif /* __ETHER00_H */ diff --git a/include/asm-arm/arch-epxa10db/excalibur.h b/include/asm-arm/arch-epxa10db/excalibur.h deleted file mode 100644 index 5c91dd6d782..00000000000 --- a/include/asm-arm/arch-epxa10db/excalibur.h +++ /dev/null @@ -1,91 +0,0 @@ -/* megafunction wizard: %ARM-Based Excalibur% - GENERATION: STANDARD - VERSION: WM1.0 - MODULE: ARM-Based Excalibur - PROJECT: excalibur - ============================================================ - File Name: v:\embedded\linux\bootldr\excalibur.h - Megafunction Name(s): ARM-Based Excalibur - ============================================================ - - ************************************************************ - THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! - ************************************************************/ - -#ifndef EXCALIBUR_H_INCLUDED -#define EXCALIBUR_H_INCLUDED - -#define EXC_DEFINE_PROCESSOR_LITTLE_ENDIAN -#define EXC_DEFINE_BOOT_FROM_FLASH - -#define EXC_INPUT_CLK_FREQUENCY (50000000) -#define EXC_AHB1_CLK_FREQUENCY (150000000) -#define EXC_AHB2_CLK_FREQUENCY (75000000) -#define EXC_SDRAM_CLK_FREQUENCY (75000000) - -/* Registers Block */ -#define EXC_REGISTERS_BASE (0x7fffc000) -#define EXC_MODE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x000) -#define EXC_IO_CTRL00_BASE (EXC_REGISTERS_BASE + 0x040) -#define EXC_MMAP00_BASE (EXC_REGISTERS_BASE + 0x080) -#define EXC_PLD_CONFIG00_BASE (EXC_REGISTERS_BASE + 0x140) -#define EXC_TIMER00_BASE (EXC_REGISTERS_BASE + 0x200) -#define EXC_INT_CTRL00_BASE (EXC_REGISTERS_BASE + 0xc00) -#define EXC_CLOCK_CTRL00_BASE (EXC_REGISTERS_BASE + 0x300) -#define EXC_WATCHDOG00_BASE (EXC_REGISTERS_BASE + 0xa00) -#define EXC_UART00_BASE (EXC_REGISTERS_BASE + 0x280) -#define EXC_EBI00_BASE (EXC_REGISTERS_BASE + 0x380) -#define EXC_SDRAM00_BASE (EXC_REGISTERS_BASE + 0x400) -#define EXC_AHB12_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x800) -#define EXC_PLD_STRIPE_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100) -#define EXC_STRIPE_PLD_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100) - -#define EXC_REGISTERS_SIZE (0x00004000) - -/* EBI Block(s) */ -#define EXC_EBI_BLOCK0_BASE (0x40000000) -#define EXC_EBI_BLOCK0_SIZE (0x00400000) -#define EXC_EBI_BLOCK0_WIDTH (8) -#define EXC_EBI_BLOCK0_NON_CACHEABLE -#define EXC_EBI_BLOCK1_BASE (0x40400000) -#define EXC_EBI_BLOCK1_SIZE (0x00400000) -#define EXC_EBI_BLOCK1_WIDTH (16) -#define EXC_EBI_BLOCK1_NON_CACHEABLE -#define EXC_EBI_BLOCK2_BASE (0x40800000) -#define EXC_EBI_BLOCK2_SIZE (0x00400000) -#define EXC_EBI_BLOCK2_WIDTH (16) -#define EXC_EBI_BLOCK2_NON_CACHEABLE -#define EXC_EBI_BLOCK3_BASE (0x40c00000) -#define EXC_EBI_BLOCK3_SIZE (0x00400000) -#define EXC_EBI_BLOCK3_WIDTH (16) -#define EXC_EBI_BLOCK3_NON_CACHEABLE - -/* SDRAM Block(s) */ -#define EXC_SDRAM_BLOCK0_BASE (0x00000000) -#define EXC_SDRAM_BLOCK0_SIZE (0x04000000) -#define EXC_SDRAM_BLOCK0_WIDTH (32) -#define EXC_SDRAM_BLOCK1_BASE (0x04000000) -#define EXC_SDRAM_BLOCK1_SIZE (0x04000000) -#define EXC_SDRAM_BLOCK1_WIDTH (32) - -/* Single Port SRAM Block(s) */ -#define EXC_SPSRAM_BLOCK0_BASE (0x08000000) -#define EXC_SPSRAM_BLOCK0_SIZE (0x00020000) -#define EXC_SPSRAM_BLOCK1_BASE (0x08020000) -#define EXC_SPSRAM_BLOCK1_SIZE (0x00020000) - -/* PLD Block(s) */ -#define EXC_PLD_BLOCK0_BASE (0x80000000) -#define EXC_PLD_BLOCK0_SIZE (0x00004000) -#define EXC_PLD_BLOCK0_NON_CACHEABLE -#define EXC_PLD_BLOCK1_BASE (0xf000000) -#define EXC_PLD_BLOCK1_SIZE (0x00004000) -#define EXC_PLD_BLOCK1_NON_CACHEABLE -#define EXC_PLD_BLOCK2_BASE (0x80008000) -#define EXC_PLD_BLOCK2_SIZE (0x00004000) -#define EXC_PLD_BLOCK2_NON_CACHEABLE -#define EXC_PLD_BLOCK3_BASE (0x8000c000) -#define EXC_PLD_BLOCK3_SIZE (0x00004000) -#define EXC_PLD_BLOCK3_NON_CACHEABLE - -#endif diff --git a/include/asm-arm/arch-epxa10db/hardware.h b/include/asm-arm/arch-epxa10db/hardware.h deleted file mode 100644 index b992c2924a7..00000000000 --- a/include/asm-arm/arch-epxa10db/hardware.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * linux/include/asm-arm/arch-epxa10/hardware.h - * - * This file contains the hardware definitions of the Integrator. - * - * Copyright (C) 1999 ARM Limited. - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/arch/platform.h> - -/* - * Where in virtual memory the IO devices (timers, system controllers - * and so on) - */ -#define IO_BASE 0xf0000000 // VA of IO -#define IO_SIZE 0x10000000 // How much? -#define IO_START EXC_REGISTERS_BASE // PA of IO -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | 0xf0000000) - -#define FLASH_VBASE 0xFE000000 -#define FLASH_SIZE 0x01000000 -#define FLASH_START EXC_EBI_BLOCK0_BASE -#define FLASH_VADDR(x) ((x)|0xFE000000) -/* - * Similar to above, but for PCI addresses (memory, IO, Config and the - * V3 chip itself). WARNING: this has to mirror definitions in platform.h - */ -#if 0 -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define PCIO_BASE PCI_IO_VADDR -#define PCIMEM_BASE PCI_MEMORY_VADDR - - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x00100000 -#endif - - -#endif - diff --git a/include/asm-arm/arch-epxa10db/int_ctrl00.h b/include/asm-arm/arch-epxa10db/int_ctrl00.h deleted file mode 100644 index 23ec864c40b..00000000000 --- a/include/asm-arm/arch-epxa10db/int_ctrl00.h +++ /dev/null @@ -1,288 +0,0 @@ -/* - * - * This file contains the register definitions for the Excalibur - * Timer TIMER00. - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __INT_CTRL00_H -#define __INT_CTRL00_H - -#define INT_MS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x00 )) -#define INT_MS_FC_MSK (0x10000) -#define INT_MS_FC_OFST (16) -#define INT_MS_M1_MSK (0x8000) -#define INT_MS_M1_OFST (15) -#define INT_MS_M0_MSK (0x4000) -#define INT_MS_M0_OFST (14) -#define INT_MS_AE_MSK (0x2000) -#define INT_MS_AE_OFST (13) -#define INT_MS_PE_MSK (0x1000) -#define INT_MS_PE_OFST (12) -#define INT_MS_EE_MSK (0x0800) -#define INT_MS_EE_OFST (11) -#define INT_MS_PS_MSK (0x0400) -#define INT_MS_PS_OFST (10) -#define INT_MS_T1_MSK (0x0200) -#define INT_MS_T1_OFST (9) -#define INT_MS_T0_MSK (0x0100) -#define INT_MS_T0_OFST (8) -#define INT_MS_UA_MSK (0x0080) -#define INT_MS_UA_OFST (7) -#define INT_MS_IP_MSK (0x0040) -#define INT_MS_IP_OFST (6) -#define INT_MS_P5_MSK (0x0020) -#define INT_MS_P5_OFST (5) -#define INT_MS_P4_MSK (0x0010) -#define INT_MS_P4_OFST (4) -#define INT_MS_P3_MSK (0x0008) -#define INT_MS_P3_OFST (3) -#define INT_MS_P2_MSK (0x0004) -#define INT_MS_P2_OFST (2) -#define INT_MS_P1_MSK (0x0002) -#define INT_MS_P1_OFST (1) -#define INT_MS_P0_MSK (0x0001) -#define INT_MS_P0_OFST (0) - -#define INT_MC(base_addr) (INT_CTRL00_TYPE (base_addr + 0x04 )) -#define INT_MC_FC_MSK (0x10000) -#define INT_MC_FC_OFST (16) -#define INT_MC_M1_MSK (0x8000) -#define INT_MC_M1_OFST (15) -#define INT_MC_M0_MSK (0x4000) -#define INT_MC_M0_OFST (14) -#define INT_MC_AE_MSK (0x2000) -#define INT_MC_AE_OFST (13) -#define INT_MC_PE_MSK (0x1000) -#define INT_MC_PE_OFST (12) -#define INT_MC_EE_MSK (0x0800) -#define INT_MC_EE_OFST (11) -#define INT_MC_PS_MSK (0x0400) -#define INT_MC_PS_OFST (10) -#define INT_MC_T1_MSK (0x0200) -#define INT_MC_T1_OFST (9) -#define INT_MC_T0_MSK (0x0100) -#define INT_MC_T0_OFST (8) -#define INT_MC_UA_MSK (0x0080) -#define INT_MC_UA_OFST (7) -#define INT_MC_IP_MSK (0x0040) -#define INT_MC_IP_OFST (6) -#define INT_MC_P5_MSK (0x0020) -#define INT_MC_P5_OFST (5) -#define INT_MC_P4_MSK (0x0010) -#define INT_MC_P4_OFST (4) -#define INT_MC_P3_MSK (0x0008) -#define INT_MC_P3_OFST (3) -#define INT_MC_P2_MSK (0x0004) -#define INT_MC_P2_OFST (2) -#define INT_MC_P1_MSK (0x0002) -#define INT_MC_P1_OFST (1) -#define INT_MC_P0_MSK (0x0001) -#define INT_MC_P0_OFST (0) - -#define INT_SS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x08 )) -#define INT_SS_FC_SSK (0x8000) -#define INT_SS_FC_OFST (15) -#define INT_SS_M1_SSK (0x8000) -#define INT_SS_M1_OFST (15) -#define INT_SS_M0_SSK (0x4000) -#define INT_SS_M0_OFST (14) -#define INT_SS_AE_SSK (0x2000) -#define INT_SS_AE_OFST (13) -#define INT_SS_PE_SSK (0x1000) -#define INT_SS_PE_OFST (12) -#define INT_SS_EE_SSK (0x0800) -#define INT_SS_EE_OFST (11) -#define INT_SS_PS_SSK (0x0400) -#define INT_SS_PS_OFST (10) -#define INT_SS_T1_SSK (0x0200) -#define INT_SS_T1_OFST (9) -#define INT_SS_T0_SSK (0x0100) -#define INT_SS_T0_OFST (8) -#define INT_SS_UA_SSK (0x0080) -#define INT_SS_UA_OFST (7) -#define INT_SS_IP_SSK (0x0040) -#define INT_SS_IP_OFST (6) -#define INT_SS_P5_SSK (0x0020) -#define INT_SS_P5_OFST (5) -#define INT_SS_P4_SSK (0x0010) -#define INT_SS_P4_OFST (4) -#define INT_SS_P3_SSK (0x0008) -#define INT_SS_P3_OFST (3) -#define INT_SS_P2_SSK (0x0004) -#define INT_SS_P2_OFST (2) -#define INT_SS_P1_SSK (0x0002) -#define INT_SS_P1_OFST (1) -#define INT_SS_P0_SSK (0x0001) -#define INT_SS_P0_OFST (0) - -#define INT_RS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x0C )) -#define INT_RS_FC_RSK (0x10000) -#define INT_RS_FC_OFST (16) -#define INT_RS_M1_RSK (0x8000) -#define INT_RS_M1_OFST (15) -#define INT_RS_M0_RSK (0x4000) -#define INT_RS_M0_OFST (14) -#define INT_RS_AE_RSK (0x2000) -#define INT_RS_AE_OFST (13) -#define INT_RS_PE_RSK (0x1000) -#define INT_RS_PE_OFST (12) -#define INT_RS_EE_RSK (0x0800) -#define INT_RS_EE_OFST (11) -#define INT_RS_PS_RSK (0x0400) -#define INT_RS_PS_OFST (10) -#define INT_RS_T1_RSK (0x0200) -#define INT_RS_T1_OFST (9) -#define INT_RS_T0_RSK (0x0100) -#define INT_RS_T0_OFST (8) -#define INT_RS_UA_RSK (0x0080) -#define INT_RS_UA_OFST (7) -#define INT_RS_IP_RSK (0x0040) -#define INT_RS_IP_OFST (6) -#define INT_RS_P5_RSK (0x0020) -#define INT_RS_P5_OFST (5) -#define INT_RS_P4_RSK (0x0010) -#define INT_RS_P4_OFST (4) -#define INT_RS_P3_RSK (0x0008) -#define INT_RS_P3_OFST (3) -#define INT_RS_P2_RSK (0x0004) -#define INT_RS_P2_OFST (2) -#define INT_RS_P1_RSK (0x0002) -#define INT_RS_P1_OFST (1) -#define INT_RS_P0_RSK (0x0001) -#define INT_RS_P0_OFST (0) - -#define INT_ID(base_addr) (INT_CTRL00_TYPE (base_addr + 0x10 )) -#define INT_ID_ID_MSK (0x3F) -#define INT_ID_ID_OFST (0) - -#define INT_PLD_PRIORITY(base_addr) (INT_CTRL00_TYPE (base_addr + 0x14 )) -#define INT_PLD_PRIORITY_PRI_MSK (0x3F) -#define INT_PLD_PRIORITY_PRI_OFST (0) -#define INT_PLD_PRIORITY_GA_MSK (0x40) -#define INT_PLD_PRIORITY_GA_OFST (6) - -#define INT_MODE(base_addr) (INT_CTRL00_TYPE (base_addr + 0x18 )) -#define INT_MODE_MODE_MSK (0x3) -#define INT_MODE_MODE_OFST (0) - -#define INT_PRIORITY_P0(base_addr) (INT_CTRL00_TYPE (base_addr + 0x80 )) -#define INT_PRIORITY_P0_PRI_MSK (0x3F) -#define INT_PRIORITY_P0_PRI_OFST (0) -#define INT_PRIORITY_P0_FQ_MSK (0x40) -#define INT_PRIORITY_P0_FQ_OFST (6) - -#define INT_PRIORITY_P1(base_addr) (INT_CTRL00_TYPE (base_addr + 0x84 )) -#define INT_PRIORITY_P1_PRI_MSK (0x3F) -#define INT_PRIORITY_P1_PRI_OFST (0) -#define INT_PRIORITY_P1_FQ_MSK (0x40) -#define INT_PRIORITY_P1_FQ_OFST (6) - -#define INT_PRIORITY_P2(base_addr) (INT_CTRL00_TYPE (base_addr + 0x88 )) -#define INT_PRIORITY_P2_PRI_MSK (0x3F) -#define INT_PRIORITY_P2_PRI_OFST (0) -#define INT_PRIORITY_P2_FQ_MSK (0x40) -#define INT_PRIORITY_P2_FQ_OFST (6) - -#define INT_PRIORITY_P3(base_addr) (INT_CTRL00_TYPE (base_addr + 0x8C )) -#define INT_PRIORITY_P3_PRI_MSK (0x3F) -#define INT_PRIORITY_P3_PRI_OFST (0) -#define INT_PRIORITY_P3_FQ_MSK (0x40) -#define INT_PRIORITY_P3_FQ_OFST (6) - -#define INT_PRIORITY_P4(base_addr) (INT_CTRL00_TYPE (base_addr + 0x90 )) -#define INT_PRIORITY_P4_PRI_MSK (0x3F) -#define INT_PRIORITY_P4_PRI_OFST (0) -#define INT_PRIORITY_P4_FQ_MSK (0x40) -#define INT_PRIORITY_P4_FQ_OFST (6) - -#define INT_PRIORITY_P5(base_addr) (INT_CTRL00_TYPE (base_addr + 0x94 )) -#define INT_PRIORITY_P5_PRI_MSK (0x3F) -#define INT_PRIORITY_P5_PRI_OFST (0) -#define INT_PRIORITY_P5_FQ_MSK (0x40) -#define INT_PRIORITY_P5_FQ_OFST (6) - -#define INT_PRIORITY_IP(base_addr) (INT_CTRL00_TYPE (base_addr + 0x94 )) -#define INT_PRIORITY_IP_PRI_MSK (0x3F) -#define INT_PRIORITY_IP_PRI_OFST (0) -#define INT_PRIORITY_IP_FQ_MSK (0x40) -#define INT_PRIORITY_IP_FQ_OFST (6) - -#define INT_PRIORITY_UA(base_addr) (INT_CTRL00_TYPE (base_addr + 0x9C )) -#define INT_PRIORITY_UA_PRI_MSK (0x3F) -#define INT_PRIORITY_UA_PRI_OFST (0) -#define INT_PRIORITY_UA_FQ_MSK (0x40) -#define INT_PRIORITY_UA_FQ_OFST (6) - -#define INT_PRIORITY_T0(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA0 )) -#define INT_PRIORITY_T0_PRI_MSK (0x3F) -#define INT_PRIORITY_T0_PRI_OFST (0) -#define INT_PRIORITY_T0_FQ_MSK (0x40) -#define INT_PRIORITY_T0_FQ_OFST (6) - -#define INT_PRIORITY_T1(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA4 )) -#define INT_PRIORITY_T1_PRI_MSK (0x3F) -#define INT_PRIORITY_T1_PRI_OFST (0) -#define INT_PRIORITY_T1_FQ_MSK (0x40) -#define INT_PRIORITY_T1_FQ_OFST (6) - -#define INT_PRIORITY_PS(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA8 )) -#define INT_PRIORITY_PS_PRI_MSK (0x3F) -#define INT_PRIORITY_PS_PRI_OFST (0) -#define INT_PRIORITY_PS_FQ_MSK (0x40) -#define INT_PRIORITY_PS_FQ_OFST (6) - -#define INT_PRIORITY_EE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xAC )) -#define INT_PRIORITY_EE_PRI_MSK (0x3F) -#define INT_PRIORITY_EE_PRI_OFST (0) -#define INT_PRIORITY_EE_FQ_MSK (0x40) -#define INT_PRIORITY_EE_FQ_OFST (6) - -#define INT_PRIORITY_PE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB0 )) -#define INT_PRIORITY_PE_PRI_MSK (0x3F) -#define INT_PRIORITY_PE_PRI_OFST (0) -#define INT_PRIORITY_PE_FQ_MSK (0x40) -#define INT_PRIORITY_PE_FQ_OFST (6) - -#define INT_PRIORITY_AE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB4 )) -#define INT_PRIORITY_AE_PRI_MSK (0x3F) -#define INT_PRIORITY_AE_PRI_OFST (0) -#define INT_PRIORITY_AE_FQ_MSK (0x40) -#define INT_PRIORITY_AE_FQ_OFST (6) - -#define INT_PRIORITY_M0(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB8 )) -#define INT_PRIORITY_M0_PRI_MSK (0x3F) -#define INT_PRIORITY_M0_PRI_OFST (0) -#define INT_PRIORITY_M0_FQ_MSK (0x40) -#define INT_PRIORITY_M0_FQ_OFST (6) - -#define INT_PRIORITY_M1(base_addr) (INT_CTRL00_TYPE (base_addr + 0xBC )) -#define INT_PRIORITY_M1_PRI_MSK (0x3F) -#define INT_PRIORITY_M1_PRI_OFST (0) -#define INT_PRIORITY_M1_FQ_MSK (0x40) -#define INT_PRIORITY_M1_FQ_OFST (6) - -#define INT_PRIORITY_FC(base_addr) (INT_CTRL00_TYPE (base_addr + 0xC0 )) -#define INT_PRIORITY_FC_PRI_MSK (0x3F) -#define INT_PRIORITY_FC_PRI_OFST (0) -#define INT_PRIORITY_FC_FQ_MSK (0x40) -#define INT_PRIORITY_FC_FQ_OFST (6) - -#endif /* __INT_CTRL00_H */ - - diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h deleted file mode 100644 index 9fe100c9d6b..00000000000 --- a/include/asm-arm/arch-epxa10db/io.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/include/asm-arm/arch-epxa10db/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <asm/hardware.h> - -#define IO_SPACE_LIMIT 0xffff - - -/* - * Generic virtual read/write - */ -/*#define outsw __arch_writesw -#define outsl __arch_writesl -#define outsb __arch_writesb -#define insb __arch_readsb -#define insw __arch_readsw -#define insl __arch_readsl*/ - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-epxa10db/irqs.h b/include/asm-arm/arch-epxa10db/irqs.h deleted file mode 100644 index c3758a3b5d9..00000000000 --- a/include/asm-arm/arch-epxa10db/irqs.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/arch-camelot/irqs.h - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* Use the Excalibur chip definitions */ -#define INT_CTRL00_TYPE -#include "asm/arch/int_ctrl00.h" - - -#define IRQ_PLD0 INT_MS_P0_OFST -#define IRQ_PLD1 INT_MS_P1_OFST -#define IRQ_PLD2 INT_MS_P2_OFST -#define IRQ_PLD3 INT_MS_P3_OFST -#define IRQ_PLD4 INT_MS_P4_OFST -#define IRQ_PLD5 INT_MS_P5_OFST -#define IRQ_EXT INT_MS_IP_OFST -#define IRQ_UART INT_MS_UA_OFST -#define IRQ_TIMER0 INT_MS_T0_OFST -#define IRQ_TIMER1 INT_MS_T1_OFST -#define IRQ_PLL INT_MS_PLL_OFST -#define IRQ_EBI INT_MS_EBI_OFST -#define IRQ_STRIPE_BRIDGE INT_MS_PLL_OFST -#define IRQ_AHB_BRIDGE INT_MS_PLL_OFST -#define IRQ_COMMRX INT_MS_CR_OFST -#define IRQ_COMMTX INT_MS_CT_OFST -#define IRQ_FAST_COMM INT_MS_FC_OFST - -#define NR_IRQS (INT_MS_FC_OFST + 1) - diff --git a/include/asm-arm/arch-epxa10db/mode_ctrl00.h b/include/asm-arm/arch-epxa10db/mode_ctrl00.h deleted file mode 100644 index d8a7efa12e1..00000000000 --- a/include/asm-arm/arch-epxa10db/mode_ctrl00.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef __MODE_CTRL00_H -#define __MODE_CTRL00_H - -/* - * Register definitions for the reset and mode control - */ - -/* - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - - -#define BOOT_CR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR )) -#define BOOT_CR_BF_MSK (0x1) -#define BOOT_CR_BF_OFST (0) -#define BOOT_CR_HM_MSK (0x2) -#define BOOT_CR_HM_OFST (1) -#define BOOT_CR_RE_MSK (0x4) -#define BOOT_CR_RE_OFST (2) - -#define RESET_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x4 )) -#define RESET_SR_WR_MSK (0x1) -#define RESET_SR_WR_OFST (0) -#define RESET_SR_CR_MSK (0x2) -#define RESET_SR_CR_OFST (1) -#define RESET_SR_JT_MSK (0x4) -#define RESET_SR_JT_OFST (2) -#define RESET_SR_ER_MSK (0x8) -#define RESET_SR_ER_OFST (3) - -#define ID_CODE(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x08 )) - -#define SRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x20 )) -#define SRAM0_SR_SIZE_MSK (0xFFFFF000) -#define SRAM0_SR_SIZE_OFST (12) - -#define SRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x24 )) -#define SRAM1_SR_SIZE_MSK (0xFFFFF000) -#define SRAM1_SR_SIZE_OFST (12) - -#define DPSRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x30 )) - -#define DPSRAM0_SR_MODE_MSK (0xF) -#define DPSRAM0_SR_MODE_OFST (0) -#define DPSRAM0_SR_GLBL_MSK (0x30) -#define DPSRAM0_SR_SIZE_MSK (0xFFFFF000) -#define DPSRAM0_SR_SIZE_OFST (12) - -#define DPSRAM0_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x34 )) -#define DPSRAM0_LCR_LCKADDR_MSK (0x1FFE0) -#define DPSRAM0_LCR_LCKADDR_OFST (4) - -#define DPSRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x38 )) -#define DPSRAM1_SR_MODE_MSK (0xF) -#define DPSRAM1_SR_MODE_OFST (0) -#define DPSRAM1_SR_GLBL_MSK (0x30) -#define DPSRAM1_SR_GLBL_OFST (4) -#define DPSRAM1_SR_SIZE_MSK (0xFFFFF000) -#define DPSRAM1_SR_SIZE_OFST (12) - -#define DPSRAM1_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x3C )) -#define DPSRAM1_LCR_LCKADDR_MSK (0x1FFE0) -#define DPSRAM1_LCR_LCKADDR_OFST (4) - -#endif /* __MODE_CTRL00_H */ diff --git a/include/asm-arm/arch-epxa10db/platform.h b/include/asm-arm/arch-epxa10db/platform.h deleted file mode 100644 index 129bb0f212a..00000000000 --- a/include/asm-arm/arch-epxa10db/platform.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef PLATFORM_H -#define PLATFORM_H -#include "excalibur.h" - -#define MAXIRQNUM 15 -#endif - diff --git a/include/asm-arm/arch-epxa10db/pld_conf00.h b/include/asm-arm/arch-epxa10db/pld_conf00.h deleted file mode 100644 index 7af2c38dacc..00000000000 --- a/include/asm-arm/arch-epxa10db/pld_conf00.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __PLD_CONF00_H -#define __PLD_CONF00_H - -/* - * Register definitions for the PLD Configuration Logic - */ - -/* - * - * This file contains the register definitions for the Excalibur - * Interrupt controller INT_CTRL00. - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CONFIG_CONTROL(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR)) -#define CONFIG_CONTROL_LK_MSK (0x1) -#define CONFIG_CONTROL_LK_OFST (0) -#define CONFIG_CONTROL_CO_MSK (0x2) -#define CONFIG_CONTROL_CO_OFST (1) -#define CONFIG_CONTROL_B_MSK (0x4) -#define CONFIG_CONTROL_B_OFST (2) -#define CONFIG_CONTROL_PC_MSK (0x8) -#define CONFIG_CONTROL_PC_OFST (3) -#define CONFIG_CONTROL_E_MSK (0x10) -#define CONFIG_CONTROL_E_OFST (4) -#define CONFIG_CONTROL_ES_MSK (0xE0) -#define CONFIG_CONTROL_ES_OFST (5) -#define CONFIG_CONTROL_ES_0_MSK (0x20) -#define CONFIG_CONTROL_ES_1_MSK (0x40) -#define CONFIG_CONTROL_ES_2_MSK (0x80) - -#define CONFIG_CONTROL_CLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0x4 )) -#define CONFIG_CONTROL_CLOCK_RATIO_MSK (0xFFFF) -#define CONFIG_CONTROL_CLOCK_RATIO_OFST (0) - -#define CONFIG_CONTROL_DATA(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0x8 )) -#define CONFIG_CONTROL_DATA_MSK (0xFFFFFFFF) -#define CONFIG_CONTROL_DATA_OFST (0) - -#define CONFIG_UNLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0xC )) -#define CONFIG_UNLOCK_MSK (0xFFFFFFFF) -#define CONFIG_UNLOCK_OFST (0) - -#define CONFIG_UNLOCK_MAGIC (0x554E4C4B) - -#endif /* __PLD_CONF00_H */ - - - - - - - - - - - - diff --git a/include/asm-arm/arch-epxa10db/tdkphy.h b/include/asm-arm/arch-epxa10db/tdkphy.h deleted file mode 100644 index 5e107bd4e10..00000000000 --- a/include/asm-arm/arch-epxa10db/tdkphy.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - * linux/drivers/tdkphy.h - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __TDKPHY_H -#define __TDKPHY_H - -/* - * Register definitions for the TDK 78Q2120 PHY - * which is on the Camelot board - */ - -/* - * Copyright (c) Altera Corporation 2000. - * All rights reserved. - */ -#define PHY_CONTROL (0) -#define PHY_CONTROL_COLT_MSK (0x80) -#define PHY_CONTROL_COLT_OFST (7) -#define PHY_CONTROL_DUPLEX_MSK (0x100) -#define PHY_CONTROL_DUPLEX_OFST (8) -#define PHY_CONTROL_RANEG_MSK (0x200) -#define PHY_CONTROL_RANEG_OFST (9) -#define PHY_CONTROL_ISO_MSK (0x400) -#define PHY_CONTROL_ISO_OFST (10) -#define PHY_CONTROL_PWRDN_MSK (0x800) -#define PHY_CONTROL_PWRDN_OFST (11) -#define PHY_CONTROL_ANEGEN_MSK (0x1000) -#define PHY_CONTROL_ANEGEN_OFST (12) -#define PHY_CONTROL_SPEEDSL_MSK (0x2000) -#define PHY_CONTROL_SPEEDSL_OFST (13) -#define PHY_CONTROL_LOOPBK_MSK (0x4000) -#define PHY_CONTROL_LOOPBK_OFST (14) -#define PHY_CONTROL_RESET_MSK (0x8000) -#define PHY_CONTROL_RESET_OFST (15) - -#define PHY_STATUS (1) -#define PHY_STATUS_ETXD_MSK (0x1) -#define PHY_STATUS_EXTD_OFST (0) -#define PHY_STATUS_JAB_MSK (0x2) -#define PHY_STATUS_JAB_OFST (1) -#define PHY_STATUS_LINK_MSK (0x4) -#define PHY_STATUS_LINK_OFST (2) -#define PHY_STATUS_ANEGA_MSK (0x8) -#define PHY_STATUS_ANEGA_OFST (3) -#define PHY_STATUS_RFAULT_MSK (0x10) -#define PHY_STATUS_RFAULT_OFST (4) -#define PHY_STATUS_ANEGC_MSK (0x20) -#define PHY_STATUS_ANEGC_OFST (5) -#define PHY_STATUS_10T_H_MSK (0x800) -#define PHY_STATUS_10T_H_OFST (11) -#define PHY_STATUS_10T_F_MSK (0x1000) -#define PHY_STATUS_10T_F_OFST (12) -#define PHY_STATUS_100_X_H_MSK (0x2000) -#define PHY_STATUS_100_X_H_OFST (13) -#define PHY_STATUS_100_X_F_MSK (0x4000) -#define PHY_STATUS_100_X_F_OFST (14) -#define PHY_STATUS_100T4_MSK (0x8000) -#define PHY_STATUS_100T4_OFST (15) - -#define PHY_ID1 (2) -#define PHY_ID1_OUI_MSK (0xFFFF) -#define PHY_ID1_OUI_OFST (0) - -#define PHY_ID2 (3) -#define PHY_ID2_RN_MSK (0xF) -#define PHY_ID2_RN_OFST (0) -#define PHY_ID2_MN_MSK (0x3F0) -#define PHY_ID2_MN_OFST (4) -#define PHY_ID2_OUI_MSK (0xFC00) -#define PHY_ID2_OUI_OFST (10) - -#define PHY_AUTO_NEG_ADVERTISEMENT (4) -#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_MSK (0x1F) -#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_OFST (0) -#define PHY_AUTO_NEG_ADVERTISEMENT_A0_MSK (0x20) -#define PHY_AUTO_NEG_ADVERTISEMENT_A0_OFST (5) -#define PHY_AUTO_NEG_ADVERTISEMENT_A1_MSK (0x40) -#define PHY_AUTO_NEG_ADVERTISEMENT_A1_OFST (6) -#define PHY_AUTO_NEG_ADVERTISEMENT_A2_MSK (0x80) -#define PHY_AUTO_NEG_ADVERTISEMENT_A2_OFST (7) -#define PHY_AUTO_NEG_ADVERTISEMENT_A3_MSK (0x100) -#define PHY_AUTO_NEG_ADVERTISEMENT_A3_OFST (8) -#define PHY_AUTO_NEG_ADVERTISEMENT_A4_MSK (0x200) -#define PHY_AUTO_NEG_ADVERTISEMENT_A4_OFST (9) -#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_MSK (0x1FE0) -#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_OFST (5) -#define PHY_AUTO_NEG_ADVERTISEMENT_RF_MSK (0x2000) -#define PHY_AUTO_NEG_ADVERTISEMENT_RF_OFST (13) -#define PHY_AUTO_NEG_ADVERTISEMENT_RSVD_MSK (0x4000) -#define PHY_AUTO_NEG_ADVERTISEMENT_RVSD_OFST (14) -#define PHY_AUTO_NEG_ADVERTISEMENT_NP_MSK (0x8000) -#define PHY_AUTO_NEG_ADVERTISEMENT_NP_OFST (15) - -#define PHY_AUTO_NEG_LINK_PARTNER (5) -#define PHY_AUTO_NEG_LINK_PARTNER_S4_MSK (0x1F) -#define PHY_AUTO_NEG_LINK_PARTNER_S4_OFST (0) -#define PHY_AUTO_NEG_LINK_PARTNER_A7_MSK (0x1FE0) -#define PHY_AUTO_NEG_LINK_PARTNER_A7_OFST (5) -#define PHY_AUTO_NEG_LINK_PARTNER_RF_MSK (0x2000) -#define PHY_AUTO_NEG_LINK_PARTNER_RF_OFST (13) -#define PHY_AUTO_NEG_LINK_PARTNER_ACK_MSK (0x4000) -#define PHY_AUTO_NEG_LINK_PARTNER_ACK_OFST (14) -#define PHY_AUTO_NEG_LINK_PARTNER_NP_MSK (0x8000) -#define PHY_AUTO_NEG_LINK_PARTNER_NP_OFST (15) - -#define PHY_AUTO_NEG_EXPANSION (6) -#define PHY_AUTO_NEG_EXPANSION_LPANEGA_MSK (0x1) -#define PHY_AUTO_NEG_EXPANSION_LPANEGA_OFST (0) -#define PHY_AUTO_NEG_EXPANSION_PRX_MSK (0x2) -#define PHY_AUTO_NEG_EXPANSION_PRX_OFST (1) -#define PHY_AUTO_NEG_EXPANSION_NPA_MSK (0x4) -#define PHY_AUTO_NEG_EXPANSION_NPA_OFST (2) -#define PHY_AUTO_NEG_EXPANSION_LPNPA_MSK (0x8) -#define PHY_AUTO_NEG_EXPANSION_LPNPA_OFST (3) -#define PHY_AUTO_NEG_EXPANSION_PDF_MSK (0x10) -#define PHY_AUTO_NEG_EXPANSION_PDF_OFST (4) - -#define PHY_VENDOR_SPECIFIC (16) -#define PHY_VENDOR_SPECIFIC_RXCC_MSK (0x1) -#define PHY_VENDOR_SPECIFIC_RXCC_OFST (0) -#define PHY_VENDOR_SPECIFIC_PCSBP_MSK (0x2) -#define PHY_VENDOR_SPECIFIC_PCSBP_OFST (1) -#define PHY_VENDOR_SPECIFIC_RVSPOL_MSK (0x10) -#define PHY_VENDOR_SPECIFIC_RVSPOL_OFST (4) -#define PHY_VENDOR_SPECIFIC_APOL_MSK (0x20) -#define PHY_VENDOR_SPECIFIC_APOL_OFST (5) -#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_MSK (0x40) -#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_OFST (6) -#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_MSK (0x80) -#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_OFST (7) -#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_MSK (0x100) -#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_OFST (8) -#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_MSK (0x200) -#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_OFST (9) -#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_MSK (0x400) -#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_OFST (10) -#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_MSK (0x800) -#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_OFST (11) -#define PHY_VENDOR_SPECIFIC_TXHIM_MSK (0x1000) -#define PHY_VENDOR_SPECIFIC_TXHIM_OFST (12) -#define PHY_VENDOR_SPECIFIC_INT_LEVEL_MSK (0x4000) -#define PHY_VENDOR_SPECIFIC_INT_LEVEL_OFST (14) -#define PHY_VENDOR_SPECIFIC_RPTR_MSK (0x8000) -#define PHY_VENDOR_SPECIFIC_RPTR_OFST (15) - -#define PHY_IRQ_CONTROL (17) -#define PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK (0x1) -#define PHY_IRQ_CONTROL_ANEG_COMP_INT_OFST (0) -#define PHY_IRQ_CONTROL_RFAULT_INT_MSK (0x2) -#define PHY_IRQ_CONTROL_RFAULT_INT_OFST (1) -#define PHY_IRQ_CONTROL_LS_CHG_INT_MSK (0x4) -#define PHY_IRQ_CONTROL_LS_CHG_INT_OFST (2) -#define PHY_IRQ_CONTROL_LP_ACK_INT_MSK (0x8) -#define PHY_IRQ_CONTROL_LP_ACK_INT_OFST (3) -#define PHY_IRQ_CONTROL_PDF_INT_MSK (0x10) -#define PHY_IRQ_CONTROL_PDF_INT_OFST (4) -#define PHY_IRQ_CONTROL_PRX_INT_MSK (0x20) -#define PHY_IRQ_CONTROL_PRX_INT_OFST (5) -#define PHY_IRQ_CONTROL_RXER_INT_MSK (0x40) -#define PHY_IRQ_CONTROL_RXER_INT_OFST (6) -#define PHY_IRQ_CONTROL_JABBER_INT_MSK (0x80) -#define PHY_IRQ_CONTROL_JABBER_INT_OFST (7) -#define PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK (0x100) -#define PHY_IRQ_CONTROL_ANEG_COMP_IE_OFST (8) -#define PHY_IRQ_CONTROL_RFAULT_IE_MSK (0x200) -#define PHY_IRQ_CONTROL_RFAULT_IE_OFST (9) -#define PHY_IRQ_CONTROL_LS_CHG_IE_MSK (0x400) -#define PHY_IRQ_CONTROL_LS_CHG_IE_OFST (10) -#define PHY_IRQ_CONTROL_LP_ACK_IE_MSK (0x800) -#define PHY_IRQ_CONTROL_LP_ACK_IE_OFST (11) -#define PHY_IRQ_CONTROL_PDF_IE_MSK (0x1000) -#define PHY_IRQ_CONTROL_PDF_IE_OFST (12) -#define PHY_IRQ_CONTROL_PRX_IE_MSK (0x2000) -#define PHY_IRQ_CONTROL_PRX_IE_OFST (13) -#define PHY_IRQ_CONTROL_RXER_IE_MSK (0x4000) -#define PHY_IRQ_CONTROL_RXER_IE_OFST (14) -#define PHY_IRQ_CONTROL_JABBER_IE_MSK (0x8000) -#define PHY_IRQ_CONTROL_JABBER_IE_OFST (15) - -#define PHY_DIAGNOSTIC (18) -#define PHY_DIAGNOSTIC_RX_LOCK_MSK (0x100) -#define PHY_DIAGNOSTIC_RX_LOCK_OFST (8) -#define PHY_DIAGNOSTIC_RX_PASS_MSK (0x200) -#define PHY_DIAGNOSTIC_RX_PASS_OFST (9) -#define PHY_DIAGNOSTIC_RATE_MSK (0x400) -#define PHY_DIAGNOSTIC_RATE_OFST (10) -#define PHY_DIAGNOSTIC_DPLX_MSK (0x800) -#define PHY_DIAGNOSTIC_DPLX_OFST (11) -#define PHY_DIAGNOSTIC_ANEGF_MSK (0x1000) -#define PHY_DIAGNOSTIC_ANEGF_OFST (12) - -#endif /* __TDKPHY_H */ diff --git a/include/asm-arm/arch-epxa10db/timer00.h b/include/asm-arm/arch-epxa10db/timer00.h deleted file mode 100644 index 52a3fb58b59..00000000000 --- a/include/asm-arm/arch-epxa10db/timer00.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * - * This file contains the register definitions for the Excalibur - * Timer TIMER00. - * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __TIMER00_H -#define __TIMER00_H - -/* - * Register definitions for the timers - */ - - -#define TIMER0_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x00 )) -#define TIMER0_CR_B_MSK (0x20) -#define TIMER0_CR_B_OFST (0x5) -#define TIMER0_CR_S_MSK (0x10) -#define TIMER0_CR_S_OFST (0x4) -#define TIMER0_CR_CI_MSK (0x08) -#define TIMER0_CR_CI_OFST (0x3) -#define TIMER0_CR_IE_MSK (0x04) -#define TIMER0_CR_IE_OFST (0x2) -#define TIMER0_CR_MODE_MSK (0x3) -#define TIMER0_CR_MODE_OFST (0) -#define TIMER0_CR_MODE_FREE (0) -#define TIMER0_CR_MODE_ONE (1) -#define TIMER0_CR_MODE_INTVL (2) - -#define TIMER0_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x00 )) -#define TIMER0_SR_B_MSK (0x20) -#define TIMER0_SR_B_OFST (0x5) -#define TIMER0_SR_S_MSK (0x10) -#define TIMER0_SR_S_OFST (0x4) -#define TIMER0_SR_CI_MSK (0x08) -#define TIMER0_SR_CI_OFST (0x3) -#define TIMER0_SR_IE_MSK (0x04) -#define TIMER0_SR_IE_OFST (0x2) -#define TIMER0_SR_MODE_MSK (0x3) -#define TIMER0_SR_MODE_OFST (0) -#define TIMER0_SR_MODE_FREE (0) -#define TIMER0_SR_MODE_ONE (1) -#define TIMER0_SR_MODE_INTVL (2) - -#define TIMER0_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x010 )) -#define TIMER0_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x020 )) -#define TIMER0_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x030 )) - -#define TIMER1_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x40 )) -#define TIMER1_CR_B_MSK (0x20) -#define TIMER1_CR_B_OFST (0x5) -#define TIMER1_CR_S_MSK (0x10) -#define TIMER1_CR_S_OFST (0x4) -#define TIMER1_CR_CI_MSK (0x08) -#define TIMER1_CR_CI_OFST (0x3) -#define TIMER1_CR_IE_MSK (0x04) -#define TIMER1_CR_IE_OFST (0x2) -#define TIMER1_CR_MODE_MSK (0x3) -#define TIMER1_CR_MODE_OFST (0) -#define TIMER1_CR_MODE_FREE (0) -#define TIMER1_CR_MODE_ONE (1) -#define TIMER1_CR_MODE_INTVL (2) - -#define TIMER1_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x40 )) -#define TIMER1_SR_B_MSK (0x20) -#define TIMER1_SR_B_OFST (0x5) -#define TIMER1_SR_S_MSK (0x10) -#define TIMER1_SR_S_OFST (0x4) -#define TIMER1_SR_CI_MSK (0x08) -#define TIMER1_SR_CI_OFST (0x3) -#define TIMER1_SR_IE_MSK (0x04) -#define TIMER1_SR_IE_OFST (0x2) -#define TIMER1_SR_MODE_MSK (0x3) -#define TIMER1_SR_MODE_OFST (0) -#define TIMER1_SR_MODE_FREE (0) -#define TIMER1_SR_MODE_ONE (1) -#define TIMER1_SR_MODE_INTVL (2) - -#define TIMER1_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x050 )) -#define TIMER1_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x060 )) -#define TIMER1_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x070 )) - -#endif /* __TIMER00_H */ diff --git a/include/asm-arm/arch-epxa10db/uart00.h b/include/asm-arm/arch-epxa10db/uart00.h deleted file mode 100644 index 5abd8914d68..00000000000 --- a/include/asm-arm/arch-epxa10db/uart00.h +++ /dev/null @@ -1,181 +0,0 @@ -/* * - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __UART00_H -#define __UART00_H - -/* - * Register definitions for the UART - */ - -#define UART_TX_FIFO_SIZE (15) - -#define UART_RSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x00 )) -#define UART_RSR_RX_LEVEL_MSK (0x1f) -#define UART_RSR_RX_LEVEL_OFST (0) -#define UART_RSR_RE_MSK (0x80) -#define UART_RSR_RE_OFST (7) - -#define UART_RDS(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x04 )) -#define UART_RDS_BI_MSK (0x8) -#define UART_RDS_BI_OFST (4) -#define UART_RDS_FE_MSK (0x4) -#define UART_RDS_FE_OFST (2) -#define UART_RDS_PE_MSK (0x2) -#define UART_RDS_PE_OFST (1) -#define UART_RDS_OE_MSK (0x1) -#define UART_RDS_OE_OFST (0) - -#define UART_RD(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x08 )) -#define UART_RD_RX_DATA_MSK (0xff) -#define UART_RD_RX_DATA_OFST (0) - -#define UART_TSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x0c )) -#define UART_TSR_TX_LEVEL_MSK (0x1f) -#define UART_TSR_TX_LEVEL_OFST (0) -#define UART_TSR_TXI_MSK (0x80) -#define UART_TSR_TXI_OFST (7) - -#define UART_TD(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x10 )) -#define UART_TD_TX_DATA_MSK (0xff) -#define UART_TD_TX_DATA_OFST (0) - -#define UART_FCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x14 )) -#define UART_FCR_RX_THR_MSK (0xd0) -#define UART_FCR_RX_THR_OFST (5) -#define UART_FCR_RX_THR_1 (0x00) -#define UART_FCR_RX_THR_2 (0x20) -#define UART_FCR_RX_THR_4 (0x40) -#define UART_FCR_RX_THR_6 (0x60) -#define UART_FCR_RX_THR_8 (0x80) -#define UART_FCR_RX_THR_10 (0xa0) -#define UART_FCR_RX_THR_12 (0xc0) -#define UART_FCR_RX_THR_14 (0xd0) -#define UART_FCR_TX_THR_MSK (0x1c) -#define UART_FCR_TX_THR_OFST (2) -#define UART_FCR_TX_THR_0 (0x00) -#define UART_FCR_TX_THR_2 (0x04) -#define UART_FCR_TX_THR_4 (0x08) -#define UART_FCR_TX_THR_8 (0x0c) -#define UART_FCR_TX_THR_10 (0x10) -#define UART_FCR_TX_THR_12 (0x14) -#define UART_FCR_TX_THR_14 (0x18) -#define UART_FCR_TX_THR_15 (0x1c) -#define UART_FCR_RC_MSK (0x02) -#define UART_FCR_RC_OFST (1) -#define UART_FCR_TC_MSK (0x01) -#define UART_FCR_TC_OFST (0) - -#define UART_IES(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x18 )) -#define UART_IES_ME_MSK (0x8) -#define UART_IES_ME_OFST (3) -#define UART_IES_TIE_MSK (0x4) -#define UART_IES_TIE_OFST (2) -#define UART_IES_TE_MSK (0x2) -#define UART_IES_TE_OFST (1) -#define UART_IES_RE_MSK (0x1) -#define UART_IES_RE_OFST (0) - -#define UART_IEC(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x1c )) -#define UART_IEC_ME_MSK (0x8) -#define UART_IEC_ME_OFST (3) -#define UART_IEC_TIE_MSK (0x4) -#define UART_IEC_TIE_OFST (2) -#define UART_IEC_TE_MSK (0x2) -#define UART_IEC_TE_OFST (1) -#define UART_IEC_RE_MSK (0x1) -#define UART_IEC_RE_OFST (0) - -#define UART_ISR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x20 )) -#define UART_ISR_MI_MSK (0x8) -#define UART_ISR_MI_OFST (3) -#define UART_ISR_TII_MSK (0x4) -#define UART_ISR_TII_OFST (2) -#define UART_ISR_TI_MSK (0x2) -#define UART_ISR_TI_OFST (1) -#define UART_ISR_RI_MSK (0x1) -#define UART_ISR_RI_OFST (0) - -#define UART_IID(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x24 )) -#define UART_IID_IID_MSK (0x7) -#define UART_IID_IID_OFST (0) - -#define UART_MC(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x28 )) -#define UART_MC_OE_MSK (0x40) -#define UART_MC_OE_OFST (6) -#define UART_MC_SP_MSK (0x20) -#define UART_MC_SP_OFST (5) -#define UART_MC_EP_MSK (0x10) -#define UART_MC_EP_OFST (4) -#define UART_MC_PE_MSK (0x08) -#define UART_MC_PE_OFST (3) -#define UART_MC_ST_MSK (0x04) -#define UART_MC_ST_ONE (0x0) -#define UART_MC_ST_TWO (0x04) -#define UART_MC_ST_OFST (2) -#define UART_MC_CLS_MSK (0x03) -#define UART_MC_CLS_OFST (0) -#define UART_MC_CLS_CHARLEN_5 (0) -#define UART_MC_CLS_CHARLEN_6 (1) -#define UART_MC_CLS_CHARLEN_7 (2) -#define UART_MC_CLS_CHARLEN_8 (3) - -#define UART_MCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x2c )) -#define UART_MCR_AC_MSK (0x80) -#define UART_MCR_AC_OFST (7) -#define UART_MCR_AR_MSK (0x40) -#define UART_MCR_AR_OFST (6) -#define UART_MCR_BR_MSK (0x20) -#define UART_MCR_BR_OFST (5) -#define UART_MCR_LB_MSK (0x10) -#define UART_MCR_LB_OFST (4) -#define UART_MCR_DCD_MSK (0x08) -#define UART_MCR_DCD_OFST (3) -#define UART_MCR_RI_MSK (0x04) -#define UART_MCR_RI_OFST (2) -#define UART_MCR_DTR_MSK (0x02) -#define UART_MCR_DTR_OFST (1) -#define UART_MCR_RTS_MSK (0x01) -#define UART_MCR_RTS_OFST (0) - -#define UART_MSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x30 )) -#define UART_MSR_DCD_MSK (0x80) -#define UART_MSR_DCD_OFST (7) -#define UART_MSR_RI_MSK (0x40) -#define UART_MSR_RI_OFST (6) -#define UART_MSR_DSR_MSK (0x20) -#define UART_MSR_DSR_OFST (5) -#define UART_MSR_CTS_MSK (0x10) -#define UART_MSR_CTS_OFST (4) -#define UART_MSR_DDCD_MSK (0x08) -#define UART_MSR_DDCD_OFST (3) -#define UART_MSR_TERI_MSK (0x04) -#define UART_MSR_TERI_OFST (2) -#define UART_MSR_DDSR_MSK (0x02) -#define UART_MSR_DDSR_OFST (1) -#define UART_MSR_DCTS_MSK (0x01) -#define UART_MSR_DCTS_OFST (0) - -#define UART_DIV_LO(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x34 )) -#define UART_DIV_LO_DIV_MSK (0xff) -#define UART_DIV_LO_DIV_OFST (0) - -#define UART_DIV_HI(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x38 )) -#define UART_DIV_HI_DIV_MSK (0xff) -#define UART_DIV_HI_DIV_OFST (0) - -#endif /* __UART00_H */ diff --git a/include/asm-arm/arch-epxa10db/uncompress.h b/include/asm-arm/arch-epxa10db/uncompress.h deleted file mode 100644 index fdfe0e6848f..00000000000 --- a/include/asm-arm/arch-epxa10db/uncompress.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/arch-epxa10db/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2001 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include "asm/arch/platform.h" -#include "asm/hardware.h" -#define UART00_TYPE (volatile unsigned int*) -#include "asm/arch/uart00.h" - -/* - * This does not append a newline - */ -static void putstr(const char *s) -{ - while (*s) { - while ((*UART_TSR(EXC_UART00_BASE) & - UART_TSR_TX_LEVEL_MSK)==15) - barrier(); - - *UART_TD(EXC_UART00_BASE) = *s; - - if (*s == '\n') { - while ((*UART_TSR(EXC_UART00_BASE) & - UART_TSR_TX_LEVEL_MSK)==15) - barrier(); - - *UART_TD(EXC_UART00_BASE) = '\r'; - } - s++; - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 0cf4d4f9960..fd0147e52db 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -56,7 +56,12 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); /* * Architecture ioremap implementation. + * + * __ioremap takes CPU physical address. + * + * __ioremap_pfn takes a Page Frame Number and an offset into that page */ +extern void __iomem * __ioremap_pfn(unsigned long, unsigned long, size_t, unsigned long); extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); extern void __iounmap(void __iomem *addr); @@ -261,6 +266,7 @@ out: * * ioremap takes a PCI memory address, as specified in * Documentation/IO-mapping.txt. + * */ #ifndef __arch_ioremap #define ioremap(cookie,size) __ioremap(cookie,size,0) diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h index b338936bde4..3351b77fab3 100644 --- a/include/asm-arm/mach/map.h +++ b/include/asm-arm/mach/map.h @@ -27,9 +27,6 @@ struct meminfo; #define MT_ROM 6 #define MT_IXP2000_DEVICE 7 -#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) -#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) - extern void create_memmap_holes(struct meminfo *); extern void memtable_init(struct meminfo *); extern void iotable_init(struct map_desc *, int); diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index 3e572364ee7..3d7f08bd903 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -58,6 +58,12 @@ #endif /* + * Convert a physical address to a Page Frame Number and back + */ +#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) +#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) + +/* * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ |