diff options
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/USB-Host.txt | 93 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/usb-simtec.c | 18 | ||||
| -rw-r--r-- | arch/arm/mm/mm-armv.c | 17 | ||||
| -rw-r--r-- | arch/arm/mm/proc-v6.S | 22 | ||||
| -rw-r--r-- | drivers/video/pxafb.c | 8 | ||||
| -rw-r--r-- | include/asm-arm/arch-s3c2410/usb-control.h | 3 | ||||
| -rw-r--r-- | include/asm-arm/pgtable.h | 14 |
7 files changed, 147 insertions, 28 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt new file mode 100644 index 00000000000..b93b68e2b14 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt @@ -0,0 +1,93 @@ + S3C24XX USB Host support + ======================== + + + +Introduction +------------ + + This document details the S3C2410/S3C2440 in-built OHCI USB host support. + +Configuration +------------- + + Enable at least the following kernel options: + + menuconfig: + + Device Drivers ---> + USB support ---> + <*> Support for Host-side USB + <*> OHCI HCD support + + + .config: + CONFIG_USB + CONFIG_USB_OHCI_HCD + + + Once these options are configured, the standard set of USB device + drivers can be configured and used. + + +Board Support +------------- + + The driver attaches to a platform device, which will need to be + added by the board specific support file in linux/arch/arm/mach-s3c2410, + such as mach-bast.c or mach-smdk2410.c + + The platform device's platform_data field is only needed if the + board implements extra power control or over-current monitoring. + + The OHCI driver does not ensure the state of the S3C2410's MISCCTRL + register, so if both ports are to be used for the host, then it is + the board support file's responsibility to ensure that the second + port is configured to be connected to the OHCI core. + + +Platform Data +------------- + + See linux/include/asm-arm/arch-s3c2410/usb-control.h for the + descriptions of the platform device data. An implementation + can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c . + + The `struct s3c2410_hcd_info` contains a pair of functions + that get called to enable over-current detection, and to + control the port power status. + + The ports are numbered 0 and 1. + + power_control: + + Called to enable or disable the power on the port. + + enable_oc: + + Called to enable or disable the over-current monitoring. + This should claim or release the resources being used to + check the power condition on the port, such as an IRQ. + + report_oc: + + The OHCI driver fills this field in for the over-current code + to call when there is a change to the over-current state on + an port. The ports argument is a bitmask of 1 bit per port, + with bit X being 1 for an over-current on port X. + + The function s3c2410_usb_report_oc() has been provided to + ensure this is called correctly. + + port[x]: + + This is struct describes each port, 0 or 1. The platform driver + should set the flags field of each port to S3C_HCDFLG_USED if + the port is enabled. + + + +Document Author +--------------- + +Ben Dooks, (c) 2005 Simtec Electronics diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 7f2b6136297..f021fd82be5 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/usb-simtec.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2004,2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -14,6 +14,8 @@ * Modifications: * 14-Sep-2004 BJD Created * 18-Oct-2004 BJD Cleanups, and added code to report OC cleared + * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc + * 09-Aug-2005 BJD Ports powered only if both are enabled */ #define DEBUG @@ -47,13 +49,19 @@ * designed boards. */ +static unsigned int power_state[2]; + static void usb_simtec_powercontrol(int port, int to) { pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to); - if (port == 1) - s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1); + power_state[port] = to; + + if (power_state[0] && power_state[1]) + s3c2410_gpio_setpin(S3C2410_GPB4, 0); + else + s3c2410_gpio_setpin(S3C2410_GPB4, 1); } static irqreturn_t @@ -63,10 +71,10 @@ usb_simtec_ocirq(int irq, void *pw, struct pt_regs *regs) if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) { pr_debug("usb_simtec: over-current irq (oc detected)\n"); - s3c2410_report_oc(info, 3); + s3c2410_usb_report_oc(info, 3); } else { pr_debug("usb_simtec: over-current irq (oc cleared)\n"); - s3c2410_report_oc(info, 0); + s3c2410_usb_report_oc(info, 0); } return IRQ_HANDLED; diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index e33fe4229d0..3c655c54e23 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -383,6 +383,7 @@ static void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); + unsigned int user_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -408,6 +409,9 @@ static void __init build_mem_type_table(void) } } + cp = &cache_policies[cachepolicy]; + user_pgprot = cp->pte; + /* * ARMv6 and above have extended page tables. */ @@ -426,11 +430,18 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; + /* + * Mark the device area as "shared device" + */ mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - } - cp = &cache_policies[cachepolicy]; + /* + * User pages need to be mapped with the ASID + * (iow, non-global) + */ + user_pgprot |= L_PTE_ASID; + } if (cpu_arch >= CPU_ARCH_ARMv5) { mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; @@ -448,7 +459,7 @@ static void __init build_mem_type_table(void) for (i = 0; i < 16; i++) { unsigned long v = pgprot_val(protection_map[i]); - v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte; + v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot; protection_map[i] = __pgprot(v); } diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 352db98ee26..3429ddcf65d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -111,12 +111,6 @@ ENTRY(cpu_v6_switch_mm) mcr p15, 0, r1, c13, c0, 1 @ set context ID mov pc, lr -#define nG (1 << 11) -#define APX (1 << 9) -#define AP1 (1 << 5) -#define AP0 (1 << 4) -#define XN (1 << 0) - /* * cpu_v6_set_pte(ptep, pte) * @@ -139,24 +133,24 @@ ENTRY(cpu_v6_switch_mm) ENTRY(cpu_v6_set_pte) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0x00000ff0 + bic r2, r1, #0x000007f0 bic r2, r2, #0x00000003 - orr r2, r2, #AP0 | 2 + orr r2, r2, #PTE_EXT_AP0 | 2 tst r1, #L_PTE_WRITE tstne r1, #L_PTE_DIRTY - orreq r2, r2, #APX + orreq r2, r2, #PTE_EXT_APX tst r1, #L_PTE_USER - orrne r2, r2, #AP1 | nG - tstne r2, #APX - bicne r2, r2, #APX | AP0 + orrne r2, r2, #PTE_EXT_AP1 + tstne r2, #PTE_EXT_APX + bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0 tst r1, #L_PTE_YOUNG - biceq r2, r2, #APX | AP1 | AP0 + biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK @ tst r1, #L_PTE_EXEC -@ orreq r2, r2, #XN +@ orreq r2, r2, #PTE_EXT_XN tst r1, #L_PTE_PRESENT moveq r2, #0 diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 16e37a535d8..30112816420 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -717,6 +717,9 @@ static void pxafb_enable_controller(struct pxafb_info *fbi) DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2); DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); + /* enable LCD controller clock */ + pxa_set_cken(CKEN16_LCD, 1); + /* Sequence from 11.7.10 */ LCCR3 = fbi->reg_lccr3; LCCR2 = fbi->reg_lccr2; @@ -750,6 +753,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi) schedule_timeout(20 * HZ / 1000); remove_wait_queue(&fbi->ctrlr_wait, &wait); + + /* disable LCD controller clock */ + pxa_set_cken(CKEN16_LCD, 0); } /* @@ -1299,8 +1305,6 @@ int __init pxafb_probe(struct device *dev) ret = -ENOMEM; goto failed; } - /* enable LCD controller clock */ - pxa_set_cken(CKEN16_LCD, 1); ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi); if (ret) { diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h index 1cc85a096b2..bd43b566db3 100644 --- a/include/asm-arm/arch-s3c2410/usb-control.h +++ b/include/asm-arm/arch-s3c2410/usb-control.h @@ -12,6 +12,7 @@ * Changelog: * 11-Sep-2004 BJD Created file * 21-Sep-2004 BJD Updated port info + * 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc */ #ifndef __ASM_ARCH_USBCONTROL_H @@ -35,7 +36,7 @@ struct s3c2410_hcd_info { void (*report_oc)(struct s3c2410_hcd_info *, int ports); }; -static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports) +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) { if (info->report_oc != NULL) { (info->report_oc)(info, ports); diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index a9892eb42a2..478c49b56e1 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -188,12 +188,18 @@ extern void __pgd_error(const char *file, int line, unsigned long val); /* * - extended small page/tiny page */ +#define PTE_EXT_XN (1 << 0) /* v6 */ #define PTE_EXT_AP_MASK (3 << 4) +#define PTE_EXT_AP0 (1 << 4) +#define PTE_EXT_AP1 (2 << 4) #define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (1 << 4) -#define PTE_EXT_AP_URO_SRW (2 << 4) -#define PTE_EXT_AP_URW_SRW (3 << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) #define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ +#define PTE_EXT_APX (1 << 9) /* v6 */ +#define PTE_EXT_SHARED (1 << 10) /* v6 */ +#define PTE_EXT_NG (1 << 11) /* v6 */ /* * - small page @@ -224,6 +230,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define L_PTE_WRITE (1 << 5) #define L_PTE_EXEC (1 << 6) #define L_PTE_DIRTY (1 << 7) +#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */ +#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */ #ifndef __ASSEMBLY__ |