diff options
53 files changed, 2014 insertions, 558 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4af0a4bb578..d16b5b0c8b7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -562,6 +562,15 @@ config PATA_IXP4XX_CF If unsure, say N. +config PATA_SCC + tristate "Toshiba's Cell Reference Set IDE support" + depends on PCI && PPC_IBM_CELL_BLADE + help + This option enables support for the built-in IDE controller on + Toshiba Cell Reference Board. + + If unsure, say N. + endif endmenu diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 74298afbbaa..13d7397e000 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o obj-$(CONFIG_PATA_SIS) += pata_sis.o obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o +obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o # Should be last but one libata driver obj-$(CONFIG_ATA_GENERIC) += ata_generic.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6a3543e0624..6d932409aad 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "ahci" -#define DRV_VERSION "2.0" +#define DRV_VERSION "2.1" enum { @@ -198,7 +198,6 @@ struct ahci_port_priv { void *rx_fis; dma_addr_t rx_fis_dma; /* for NCQ spurious interrupt analysis */ - int ncq_saw_spurious_sdb_cnt; unsigned int ncq_saw_d2h:1; unsigned int ncq_saw_dmas:1; }; @@ -1160,23 +1159,24 @@ static void ahci_host_intr(struct ata_port *ap) known_irq = 1; } - if (status & PORT_IRQ_SDB_FIS && - pp->ncq_saw_spurious_sdb_cnt < 10) { + if (status & PORT_IRQ_SDB_FIS) { /* SDB FIS containing spurious completions might be - * dangerous, we need to know more about them. Print - * more of it. - */ + * dangerous, whine and fail commands with HSM + * violation. EH will turn off NCQ after several such + * failures. + */ const __le32 *f = pp->rx_fis + RX_FIS_SDB; - ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ " - "issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n", - readl(port_mmio + PORT_CMD_ISSUE), - readl(port_mmio + PORT_SCR_ACT), - le32_to_cpu(f[0]), le32_to_cpu(f[1]), - pp->ncq_saw_spurious_sdb_cnt < 10 ? - "" : ", shutting up"); + ata_ehi_push_desc(ehi, "spurious completion during NCQ " + "issue=0x%x SAct=0x%x FIS=%08x:%08x", + readl(port_mmio + PORT_CMD_ISSUE), + readl(port_mmio + PORT_SCR_ACT), + le32_to_cpu(f[0]), le32_to_cpu(f[1])); + + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); - pp->ncq_saw_spurious_sdb_cnt++; known_irq = 1; } diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index be66ea08da5..f48b4883c93 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_generic" -#define DRV_VERSION "0.2.10" +#define DRV_VERSION "0.2.11" /* * A generic parallel ATA driver using libata @@ -90,10 +90,10 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused) /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ if (dma_enabled & (1 << (5 + i))) { - dev->xfer_mode = XFER_MW_DMA_0; - dev->xfer_shift = ATA_SHIFT_MWDMA; + ata_id_to_dma_mode(dev, XFER_MW_DMA_0); dev->flags &= ~ATA_DFLAG_PIO; } else { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 4d716c7347e..61572d8c78a 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -93,7 +93,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.00ac7" +#define DRV_VERSION "2.10" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -169,8 +169,6 @@ static const struct pci_device_id piix_pci_tbl[] = { /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, - { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* Intel PIIX4 */ { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, /* Intel PIIX4 */ diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index b4e8be5d292..d14a48e75f1 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -294,9 +294,8 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, return 0; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, - "%s: ENTER: ap->id: %d, port#: %d\n", - __FUNCTION__, ap->id, ap->port_no); + ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n", + __FUNCTION__, ap->port_no); if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) { if (ata_msg_probe(ap)) @@ -456,6 +455,9 @@ static void taskfile_load_raw(struct ata_port *ap, struct ata_device *atadev, const struct taskfile_array *gtf) { + struct ata_taskfile tf; + unsigned int err; + if (ata_msg_probe(ap)) ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: " "%02x %02x %02x %02x %02x %02x %02x\n", @@ -468,35 +470,25 @@ static void taskfile_load_raw(struct ata_port *ap, && (gtf->tfa[6] == 0)) return; - if (ap->ops->qc_issue) { - struct ata_taskfile tf; - unsigned int err; - - ata_tf_init(atadev, &tf); - - /* convert gtf to tf */ - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ - tf.protocol = atadev->class == ATA_DEV_ATAPI ? - ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA; - tf.feature = gtf->tfa[0]; /* 0x1f1 */ - tf.nsect = gtf->tfa[1]; /* 0x1f2 */ - tf.lbal = gtf->tfa[2]; /* 0x1f3 */ - tf.lbam = gtf->tfa[3]; /* 0x1f4 */ - tf.lbah = gtf->tfa[4]; /* 0x1f5 */ - tf.device = gtf->tfa[5]; /* 0x1f6 */ - tf.command = gtf->tfa[6]; /* 0x1f7 */ - - err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0); - if (err && ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_ERR, - "%s: ata_exec_internal failed: %u\n", - __FUNCTION__, err); - } else - if (ata_msg_warn(ap)) - ata_dev_printk(atadev, KERN_WARNING, - "%s: SATA driver is missing qc_issue function" - " entry points\n", - __FUNCTION__); + ata_tf_init(atadev, &tf); + + /* convert gtf to tf */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ + tf.protocol = atadev->class == ATA_DEV_ATAPI ? + ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA; + tf.feature = gtf->tfa[0]; /* 0x1f1 */ + tf.nsect = gtf->tfa[1]; /* 0x1f2 */ + tf.lbal = gtf->tfa[2]; /* 0x1f3 */ + tf.lbam = gtf->tfa[3]; /* 0x1f4 */ + tf.lbah = gtf->tfa[4]; /* 0x1f5 */ + tf.device = gtf->tfa[5]; /* 0x1f6 */ + tf.command = gtf->tfa[6]; /* 0x1f7 */ + + err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0); + if (err && ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: ata_exec_internal failed: %u\n", + __FUNCTION__, err); } /** @@ -521,9 +513,8 @@ static int do_drive_set_taskfiles(struct ata_port *ap, struct taskfile_array *gtf; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, - "%s: ENTER: ap->id: %d, port#: %d\n", - __FUNCTION__, ap->id, ap->port_no); + ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n", + __FUNCTION__, ap->port_no); if (noacpi || !(ap->cbl == ATA_CBL_SATA)) return 0; @@ -627,9 +618,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) return 0; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, - "%s: ap->id: %d, ix = %d, port#: %d\n", - __FUNCTION__, ap->id, ix, ap->port_no); + ata_dev_printk(atadev, KERN_DEBUG, "%s: ix = %d, port#: %d\n", + __FUNCTION__, ix, ap->port_no); /* Don't continue if not a SATA device. */ if (!(ap->cbl == ATA_CBL_SATA)) { @@ -685,9 +675,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) if (err < 0) { if (ata_msg_probe(ap)) ata_dev_printk(atadev, KERN_DEBUG, - "ata%u(%u): %s _SDD error: status = 0x%x\n", - ap->id, ap->device->devno, - __FUNCTION__, status); + "%s _SDD error: status = 0x%x\n", + __FUNCTION__, status); } /* always return success */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e900c5edefc..c8d44a7c403 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -59,7 +59,7 @@ #include "libata.h" -#define DRV_VERSION "2.10" /* must be exactly four chars */ +#define DRV_VERSION "2.20" /* must be exactly four chars */ /* debounce timing parameters in msecs { interval, duration, timeout } */ @@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); -static unsigned int ata_unique_id = 1; +static unsigned int ata_print_id = 1; static struct workqueue_struct *ata_wq; struct workqueue_struct *ata_aux_wq; @@ -315,9 +315,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->flags |= tf_flags; - if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF | - ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ && - likely(tag != ATA_TAG_INTERNAL)) { + if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) { /* yay, NCQ */ if (!lba_48_ok(block, n_block)) return -ERANGE; @@ -600,6 +598,8 @@ void ata_dev_disable(struct ata_device *dev) { if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | + ATA_DNXFER_QUIET); dev->class++; } } @@ -708,7 +708,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. */ -static unsigned int +unsigned int ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) { struct ata_taskfile tf; @@ -824,6 +824,48 @@ static u64 ata_id_n_sectors(const u16 *id) } /** + * ata_id_to_dma_mode - Identify DMA mode from id block + * @dev: device to identify + * @mode: mode to assume if we cannot tell + * + * Set up the timing values for the device based upon the identify + * reported values for the DMA mode. This function is used by drivers + * which rely upon firmware configured modes, but wish to report the + * mode correctly when possible. + * + * In addition we emit similarly formatted messages to the default + * ata_dev_set_mode handler, in order to provide consistency of + * presentation. + */ + +void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) +{ + unsigned int mask; + u8 mode; + + /* Pack the DMA modes */ + mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA; + if (dev->id[53] & 0x04) + mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA; + + /* Select the mode in use */ + mode = ata_xfer_mask2mode(mask); + + if (mode != 0) { + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + ata_mode_string(mask)); + } else { + /* SWDMA perhaps ? */ + mode = unknown; + ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); + } + + /* Configure the device reporting */ + dev->xfer_mode = mode; + dev->xfer_shift = ata_xfer_mode2shift(mode); +} + +/** * ata_noop_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate * @device: ATA device (numbered from zero) to select @@ -891,8 +933,8 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep) { if (ata_msg_probe(ap)) - ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " - "device %u, wait %u\n", ap->id, device, wait); + ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, " + "device %u, wait %u\n", device, wait); if (wait) ata_wait_idle(ap); @@ -1392,8 +1434,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, int rc; if (ata_msg_ctl(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ @@ -1430,7 +1471,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, if (err_mask) { if (err_mask & AC_ERR_NODEV_HINT) { DPRINTK("ata%u.%d: NODEV after polling detection\n", - ap->id, dev->devno); + ap->print_id, dev->devno); return -ENOENT; } @@ -1558,15 +1599,13 @@ int ata_dev_configure(struct ata_device *dev) int rc; if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { - ata_dev_printk(dev, KERN_INFO, - "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", - __FUNCTION__, ap->id, dev->devno); + ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n", + __FUNCTION__); return 0; } if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); /* set _SDD */ rc = ata_acpi_push_id(ap, dev->devno); @@ -1610,8 +1649,9 @@ int ata_dev_configure(struct ata_device *dev) if (dev->class == ATA_DEV_ATA) { if (ata_id_is_cfa(id)) { if (id[162] & 1) /* CPRM may make this media unusable */ - ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, + "supports DRM functions and may " + "not be fully accessable.\n"); snprintf(revbuf, 7, "CFA"); } else @@ -1679,7 +1719,7 @@ int ata_dev_configure(struct ata_device *dev) "%s: %s, %s, max %s\n", revbuf, modelbuf, fwrevbuf, ata_mode_string(xfer_mask)); - ata_dev_printk(dev, KERN_INFO, + ata_dev_printk(dev, KERN_INFO, "%Lu sectors, multi %u, CHS %u/%u/%u\n", (unsigned long long)dev->n_sectors, dev->multi_count, dev->cylinders, @@ -1778,7 +1818,7 @@ int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; int tries[ATA_MAX_DEVICES]; - int i, rc, down_xfermask; + int i, rc; struct ata_device *dev; ata_port_probe(ap); @@ -1787,8 +1827,6 @@ int ata_bus_probe(struct ata_port *ap) tries[i] = ATA_PROBE_MAX_TRIES; retry: - down_xfermask = 0; - /* reset and determine device classes */ ap->ops->phy_reset(ap); @@ -1836,10 +1874,8 @@ int ata_bus_probe(struct ata_port *ap) /* configure transfer mode */ rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; + if (rc) goto fail; - } for (i = 0; i < ATA_MAX_DEVICES; i++) if (ata_dev_enabled(&ap->device[i])) @@ -1851,25 +1887,29 @@ int ata_bus_probe(struct ata_port *ap) return -ENODEV; fail: + tries[dev->devno]--; + switch (rc) { case -EINVAL: - case -ENODEV: + /* eeek, something went very wrong, give up */ tries[dev->devno] = 0; break; + + case -ENODEV: + /* give it just one more chance */ + tries[dev->devno] = min(tries[dev->devno], 1); case -EIO: - sata_down_spd_limit(ap); - /* fall through */ - default: - tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) - tries[dev->devno] = 0; + if (tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(ap); + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } } - if (!tries[dev->devno]) { - ata_down_xfermask_limit(dev, 1); + if (!tries[dev->devno]) ata_dev_disable(dev); - } goto retry; } @@ -2300,7 +2340,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, /** * ata_down_xfermask_limit - adjust dev xfer masks downward * @dev: Device to adjust xfer masks - * @force_pio0: Force PIO0 + * @sel: ATA_DNXFER_* selector * * Adjust xfer masks of @dev downward. Note that this function * does not apply the change. Invoking ata_set_mode() afterwards @@ -2312,37 +2352,78 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * RETURNS: * 0 on success, negative errno on failure */ -int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) +int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) { - unsigned long xfer_mask; - int highbit; + char buf[32]; + unsigned int orig_mask, xfer_mask; + unsigned int pio_mask, mwdma_mask, udma_mask; + int quiet, highbit; - xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, - dev->udma_mask); + quiet = !!(sel & ATA_DNXFER_QUIET); + sel &= ~ATA_DNXFER_QUIET; - if (!xfer_mask) - goto fail; - /* don't gear down to MWDMA from UDMA, go directly to PIO */ - if (xfer_mask & ATA_MASK_UDMA) - xfer_mask &= ~ATA_MASK_MWDMA; + xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, + dev->udma_mask); + ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask); - highbit = fls(xfer_mask) - 1; - xfer_mask &= ~(1 << highbit); - if (force_pio0) - xfer_mask &= 1 << ATA_SHIFT_PIO; - if (!xfer_mask) - goto fail; + switch (sel) { + case ATA_DNXFER_PIO: + highbit = fls(pio_mask) - 1; + pio_mask &= ~(1 << highbit); + break; + + case ATA_DNXFER_DMA: + if (udma_mask) { + highbit = fls(udma_mask) - 1; + udma_mask &= ~(1 << highbit); + if (!udma_mask) + return -ENOENT; + } else if (mwdma_mask) { + highbit = fls(mwdma_mask) - 1; + mwdma_mask &= ~(1 << highbit); + if (!mwdma_mask) + return -ENOENT; + } + break; + + case ATA_DNXFER_40C: + udma_mask &= ATA_UDMA_MASK_40C; + break; + + case ATA_DNXFER_FORCE_PIO0: + pio_mask &= 1; + case ATA_DNXFER_FORCE_PIO: + mwdma_mask = 0; + udma_mask = 0; + break; + + default: + BUG(); + } + + xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); + + if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask) + return -ENOENT; + + if (!quiet) { + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + snprintf(buf, sizeof(buf), "%s:%s", + ata_mode_string(xfer_mask), + ata_mode_string(xfer_mask & ATA_MASK_PIO)); + else + snprintf(buf, sizeof(buf), "%s", + ata_mode_string(xfer_mask)); + + ata_dev_printk(dev, KERN_WARNING, + "limiting speed to %s\n", buf); + } ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, &dev->udma_mask); - ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", - ata_mode_string(xfer_mask)); - return 0; - - fail: - return -EINVAL; } static int ata_dev_set_mode(struct ata_device *dev) @@ -2609,7 +2690,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, { struct ata_ioports *ioaddr = &ap->ioaddr; - DPRINTK("ata%u: bus reset via SRST\n", ap->id); + DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); /* software reset. causes dev0 to be selected */ iowrite8(ap->ctl, ioaddr->ctl_addr); @@ -2669,7 +2750,7 @@ void ata_bus_reset(struct ata_port *ap) u8 err; unsigned int dev0, dev1 = 0, devmask = 0; - DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); + DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); /* determine if device 0/1 are present */ if (ap->flags & ATA_FLAG_SATA_RESET) @@ -3256,7 +3337,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, - { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, @@ -3739,7 +3819,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) struct scatterlist *lsg = &sg[qc->n_elem - 1]; int n_elem, pre_n_elem, dir, trim_sg = 0; - VPRINTK("ENTER, ata%u\n", ap->id); + VPRINTK("ENTER, ata%u\n", ap->print_id); WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); /* we must lengthen transfers to end on a 32-bit boundary */ @@ -4140,7 +4220,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (do_write != i_write) goto err_out; - VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); + VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); __atapi_pio_bytes(qc, bytes); @@ -4257,7 +4337,7 @@ int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, fsm_start: DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, ap->hsm_task_state, status); + ap->print_id, qc->tf.protocol, ap->hsm_task_state, status); switch (ap->hsm_task_state) { case HSM_ST_FIRST: @@ -4290,8 +4370,8 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); + ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device " + "error, dev_stat 0x%X\n", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -4348,8 +4428,9 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); + ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " + "device error, dev_stat 0x%X\n", + status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -4435,7 +4516,7 @@ fsm_start: /* no more data to transfer */ DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", - ap->id, qc->dev->devno, status); + ap->print_id, qc->dev->devno, status); WARN_ON(qc->err_mask); @@ -4977,7 +5058,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, u8 status, host_stat = 0; VPRINTK("ata%u: protocol %d task_state %d\n", - ap->id, qc->tf.protocol, ap->hsm_task_state); + ap->print_id, qc->tf.protocol, ap->hsm_task_state); /* Check whether we are expecting interrupt in this state */ switch (ap->hsm_task_state) { @@ -4998,7 +5079,8 @@ inline unsigned int ata_host_intr (struct ata_port *ap, qc->tf.protocol == ATA_PROT_ATAPI_DMA) { /* check status of DMA engine */ host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); + VPRINTK("ata%u: host_stat 0x%X\n", + ap->print_id, host_stat); /* if it's not our irq... */ if (!(host_stat & ATA_DMA_INTR)) @@ -5457,7 +5539,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host, ap->lock = &host->lock; ap->flags = ATA_FLAG_DISABLED; - ap->id = ata_unique_id++; + ap->print_id = ata_print_id++; ap->ctl = ATA_DEVCTL_OBS; ap->host = host; ap->dev = ent->dev; @@ -5528,7 +5610,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) { ap->scsi_host = shost; - shost->unique_id = ap->id; + shost->unique_id = ap->print_id; shost->max_id = 16; shost->max_lun = 1; shost->max_channel = 1; @@ -5792,9 +5874,9 @@ int ata_device_add(const struct ata_probe_ent *ent) /* wait for EH to finish */ ata_port_wait_eh(ap); } else { - DPRINTK("ata%u: bus probe begin\n", ap->id); + DPRINTK("ata%u: bus probe begin\n", ap->print_id); rc = ata_bus_probe(ap); - DPRINTK("ata%u: bus probe end\n", ap->id); + DPRINTK("ata%u: bus probe end\n", ap->print_id); if (rc) { /* FIXME: do something useful here? @@ -5905,11 +5987,7 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; - /* XXX - the following if can go away once all LLDs are managed */ - if (!list_empty(&dev->devres_head)) - probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL); - else - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL); if (!probe_ent) { printk(KERN_ERR DRV_NAME "(%s): out of memory\n", kobject_name(&(dev->kobj))); @@ -6015,11 +6093,10 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) { pci_save_state(pdev); + pci_disable_device(pdev); - if (mesg.event == PM_EVENT_SUSPEND) { - pci_disable_device(pdev); + if (mesg.event == PM_EVENT_SUSPEND) pci_set_power_state(pdev, PCI_D3hot); - } } int ata_pci_device_do_resume(struct pci_dev *pdev) @@ -6241,6 +6318,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); +EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_phy_debounce); EXPORT_SYMBOL_GPL(sata_phy_resume); @@ -6275,6 +6353,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend); EXPORT_SYMBOL_GPL(ata_host_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); +EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); EXPORT_SYMBOL_GPL(ata_device_blacklisted); EXPORT_SYMBOL_GPL(ata_scsi_simulate); @@ -6311,3 +6390,4 @@ EXPORT_SYMBOL_GPL(ata_irq_on); EXPORT_SYMBOL_GPL(ata_dummy_irq_on); EXPORT_SYMBOL_GPL(ata_irq_ack); EXPORT_SYMBOL_GPL(ata_dummy_irq_ack); +EXPORT_SYMBOL_GPL(ata_dev_try_classify); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 52c85af7fe9..cad0d6db6df 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -44,6 +44,12 @@ #include "libata.h" +enum { + ATA_EH_SPDN_NCQ_OFF = (1 << 0), + ATA_EH_SPDN_SPEED_DOWN = (1 << 1), + ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2), +}; + static void __ata_port_freeze(struct ata_port *ap); static void ata_eh_finish(struct ata_port *ap); static void ata_eh_handle_port_suspend(struct ata_port *ap); @@ -65,12 +71,9 @@ static void ata_ering_record(struct ata_ering *ering, int is_io, ent->timestamp = get_jiffies_64(); } -static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering) +static void ata_ering_clear(struct ata_ering *ering) { - struct ata_ering_entry *ent = &ering->ring[ering->cursor]; - if (!ent->err_mask) - return NULL; - return ent; + memset(ering, 0, sizeof(*ering)); } static int ata_ering_map(struct ata_ering *ering, @@ -585,7 +588,7 @@ static void __ata_port_freeze(struct ata_port *ap) ap->pflags |= ATA_PFLAG_FROZEN; - DPRINTK("ata%u port frozen\n", ap->id); + DPRINTK("ata%u port frozen\n", ap->print_id); } /** @@ -658,7 +661,7 @@ void ata_eh_thaw_port(struct ata_port *ap) spin_unlock_irqrestore(ap->lock, flags); - DPRINTK("ata%u port thawed\n", ap->id); + DPRINTK("ata%u port thawed\n", ap->print_id); } static void ata_eh_scsidone(struct scsi_cmnd *scmd) @@ -1159,87 +1162,99 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return action; } -static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent) +static int ata_eh_categorize_error(int is_io, unsigned int err_mask) { - if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT)) + if (err_mask & AC_ERR_ATA_BUS) return 1; - if (ent->is_io) { - if (ent->err_mask & AC_ERR_HSM) - return 1; - if ((ent->err_mask & - (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) + if (err_mask & AC_ERR_TIMEOUT) + return 2; + + if (is_io) { + if (err_mask & AC_ERR_HSM) return 2; + if ((err_mask & + (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) + return 3; } return 0; } -struct speed_down_needed_arg { +struct speed_down_verdict_arg { u64 since; - int nr_errors[3]; + int nr_errors[4]; }; -static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg) +static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) { - struct speed_down_needed_arg *arg = void_arg; + struct speed_down_verdict_arg *arg = void_arg; + int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask); if (ent->timestamp < arg->since) return -1; - arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++; + arg->nr_errors[cat]++; return 0; } /** - * ata_eh_speed_down_needed - Determine wheter speed down is necessary + * ata_eh_speed_down_verdict - Determine speed down verdict * @dev: Device of interest * * This function examines error ring of @dev and determines - * whether speed down is necessary. Speed down is necessary if - * there have been more than 3 of Cat-1 errors or 10 of Cat-2 - * errors during last 15 minutes. + * whether NCQ needs to be turned off, transfer speed should be + * stepped down, or falling back to PIO is necessary. * - * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM - * violation for known supported commands. + * Cat-1 is ATA_BUS error for any command. * - * Cat-2 errors are unclassified DEV error for known supported + * Cat-2 is TIMEOUT for any command or HSM violation for known + * supported commands. + * + * Cat-3 is is unclassified DEV error for known supported * command. * + * NCQ needs to be turned off if there have been more than 3 + * Cat-2 + Cat-3 errors during last 10 minutes. + * + * Speed down is necessary if there have been more than 3 Cat-1 + + * Cat-2 errors or 10 Cat-3 errors during last 10 minutes. + * + * Falling back to PIO mode is necessary if there have been more + * than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes. + * * LOCKING: * Inherited from caller. * * RETURNS: - * 1 if speed down is necessary, 0 otherwise + * OR of ATA_EH_SPDN_* flags. */ -static int ata_eh_speed_down_needed(struct ata_device *dev) +static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) { - const u64 interval = 15LLU * 60 * HZ; - static const int err_limits[3] = { -1, 3, 10 }; - struct speed_down_needed_arg arg; - struct ata_ering_entry *ent; - int err_cat; - u64 j64; + const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ; + u64 j64 = get_jiffies_64(); + struct speed_down_verdict_arg arg; + unsigned int verdict = 0; - ent = ata_ering_top(&dev->ering); - if (!ent) - return 0; + /* scan past 10 mins of error history */ + memset(&arg, 0, sizeof(arg)); + arg.since = j64 - min(j64, j10mins); + ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); - err_cat = ata_eh_categorize_ering_entry(ent); - if (err_cat == 0) - return 0; + if (arg.nr_errors[2] + arg.nr_errors[3] > 3) + verdict |= ATA_EH_SPDN_NCQ_OFF; + if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10) + verdict |= ATA_EH_SPDN_SPEED_DOWN; + /* scan past 3 mins of error history */ memset(&arg, 0, sizeof(arg)); + arg.since = j64 - min(j64, j5mins); + ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); - j64 = get_jiffies_64(); - if (j64 >= interval) - arg.since = j64 - interval; - else - arg.since = 0; - - ata_ering_map(&dev->ering, speed_down_needed_cb, &arg); + if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10) + verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; - return arg.nr_errors[err_cat] > err_limits[err_cat]; + return verdict; } /** @@ -1257,31 +1272,80 @@ static int ata_eh_speed_down_needed(struct ata_device *dev) * Kernel thread context (may sleep). * * RETURNS: - * 0 on success, -errno otherwise + * Determined recovery action. */ -static int ata_eh_speed_down(struct ata_device *dev, int is_io, - unsigned int err_mask) +static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, + unsigned int err_mask) { - if (!err_mask) + unsigned int verdict; + unsigned int action = 0; + + /* don't bother if Cat-0 error */ + if (ata_eh_categorize_error(is_io, err_mask) == 0) return 0; /* record error and determine whether speed down is necessary */ ata_ering_record(&dev->ering, is_io, err_mask); + verdict = ata_eh_speed_down_verdict(dev); - if (!ata_eh_speed_down_needed(dev)) - return 0; + /* turn off NCQ? */ + if ((verdict & ATA_EH_SPDN_NCQ_OFF) && + (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ | + ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) { + dev->flags |= ATA_DFLAG_NCQ_OFF; + ata_dev_printk(dev, KERN_WARNING, + "NCQ disabled due to excessive errors\n"); + goto done; + } - /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->ap) == 0) - return ATA_EH_HARDRESET; + /* speed down? */ + if (verdict & ATA_EH_SPDN_SPEED_DOWN) { + /* speed down SATA link speed if possible */ + if (sata_down_spd_limit(dev->ap) == 0) { + action |= ATA_EH_HARDRESET; + goto done; + } - /* lower transfer mode */ - if (ata_down_xfermask_limit(dev, 0) == 0) - return ATA_EH_SOFTRESET; + /* lower transfer mode */ + if (dev->spdn_cnt < 2) { + static const int dma_dnxfer_sel[] = + { ATA_DNXFER_DMA, ATA_DNXFER_40C }; + static const int pio_dnxfer_sel[] = + { ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 }; + int sel; + + if (dev->xfer_shift != ATA_SHIFT_PIO) + sel = dma_dnxfer_sel[dev->spdn_cnt]; + else + sel = pio_dnxfer_sel[dev->spdn_cnt]; + + dev->spdn_cnt++; + + if (ata_down_xfermask_limit(dev, sel) == 0) { + action |= ATA_EH_SOFTRESET; + goto done; + } + } + } + + /* Fall back to PIO? Slowing down to PIO is meaningless for + * SATA. Consider it only for PATA. + */ + if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) && + (dev->ap->cbl != ATA_CBL_SATA) && + (dev->xfer_shift != ATA_SHIFT_PIO)) { + if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) { + dev->spdn_cnt = 0; + action |= ATA_EH_SOFTRESET; + goto done; + } + } - ata_dev_printk(dev, KERN_ERR, - "speed down requested but no transfer mode left\n"); return 0; + done: + /* device has been slowed down, blow error history */ + ata_ering_clear(&dev->ering); + return action; } /** @@ -1964,7 +2028,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_eh_context *ehc = &ap->eh_context; struct ata_device *dev; - int down_xfermask, i, rc; + int i, rc; DPRINTK("ENTER\n"); @@ -1993,7 +2057,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } retry: - down_xfermask = 0; rc = 0; /* if UNLOADING, finish immediately */ @@ -2038,10 +2101,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, /* configure transfer mode if necessary */ if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; + if (rc) goto dev_fail; - } ehc->i.flags &= ~ATA_EHI_SETMODE; } @@ -2053,20 +2114,27 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, goto out; dev_fail: + ehc->tries[dev->devno]--; + switch (rc) { - case -ENODEV: - /* device missing, schedule probing */ - ehc->i.probe_mask |= (1 << dev->devno); case -EINVAL: + /* eeek, something went very wrong, give up */ ehc->tries[dev->devno] = 0; break; + + case -ENODEV: + /* device missing or wrong IDENTIFY data, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); + /* give it just one more chance */ + ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); case -EIO: - sata_down_spd_limit(ap); - default: - ehc->tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) - ehc->tries[dev->devno] = 0; + if (ehc->tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(ap); + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } } if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 0009818a430..00a9a6c8f83 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -333,6 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) scsi_cmd[8] = args[3]; scsi_cmd[10] = args[4]; scsi_cmd[12] = args[5]; + scsi_cmd[13] = args[6] & 0x0f; scsi_cmd[14] = args[0]; /* Good values for timeout and retries? Values below @@ -781,7 +782,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) */ if (qc->err_mask || tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, &sb[1], &sb[2], &sb[3], verbose); sb[1] &= 0x0f; } @@ -854,7 +855,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) */ if (qc->err_mask || tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, &sb[1], &sb[2], &sb[3], verbose); sb[1] &= 0x0f; } @@ -986,29 +987,32 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev; unsigned long flags; - int max_depth; - if (queue_depth < 1) + if (queue_depth < 1 || queue_depth == sdev->queue_depth) return sdev->queue_depth; dev = ata_scsi_find_dev(ap, sdev); if (!dev || !ata_dev_enabled(dev)) return sdev->queue_depth; - max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); - max_depth = min(ATA_MAX_QUEUE - 1, max_depth); - if (queue_depth > max_depth) - queue_depth = max_depth; - - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); - + /* NCQ enabled? */ spin_lock_irqsave(ap->lock, flags); - if (queue_depth > 1) - dev->flags &= ~ATA_DFLAG_NCQ_OFF; - else + dev->flags &= ~ATA_DFLAG_NCQ_OFF; + if (queue_depth == 1 || !ata_ncq_enabled(dev)) { dev->flags |= ATA_DFLAG_NCQ_OFF; + queue_depth = 1; + } spin_unlock_irqrestore(ap->lock, flags); + /* limit and apply queue depth */ + queue_depth = min(queue_depth, sdev->host->can_queue); + queue_depth = min(queue_depth, ata_id_queue_depth(dev->id)); + queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1); + + if (sdev->queue_depth == queue_depth) + return -EINVAL; + + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); return queue_depth; } @@ -1469,7 +1473,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } if (need_sense && !ap->ops->error_handler) - ata_dump_status(ap->id, &qc->result_tf); + ata_dump_status(ap->print_id, &qc->result_tf); qc->scsidone(cmd); @@ -1495,11 +1499,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) static int ata_scmd_need_defer(struct ata_device *dev, int is_io) { struct ata_port *ap = dev->ap; + int is_ncq = is_io && ata_ncq_enabled(dev); - if (!(dev->flags & ATA_DFLAG_NCQ)) - return 0; - - if (is_io) { + if (is_ncq) { if (!ata_tag_valid(ap->active_tag)) return 0; } else { @@ -2774,7 +2776,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, u8 *scsicmd = cmd->cmnd; DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", - ap->id, + ap->print_id, scsidev->channel, scsidev->id, scsidev->lun, scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], @@ -3234,7 +3236,7 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host, ata_port_init(ap, host, ent, 0); ap->lock = shost->host_lock; - kfree(ent); + devm_kfree(host->dev, ent); return ap; } EXPORT_SYMBOL_GPL(ata_sas_port_alloc); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 16bc3e35bdd..2ffcca063d8 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -175,7 +175,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) */ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); iowrite8(tf->command, ap->ioaddr.command_addr); ata_pause(ap); @@ -521,7 +521,7 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) static int ata_resources_present(struct pci_dev *pdev, int port) { int i; - + /* Check the PCI resources for this channel are enabled */ port = port * 2; for (i = 0; i < 2; i ++) { @@ -531,7 +531,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port) } return 1; } - + /** * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized @@ -576,7 +576,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; - + /* Discard disabled ports. Some controllers show their unused channels this way */ if (ata_resources_present(pdev, 0) == 0) diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 0ad7781d72a..c42671493e8 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -41,6 +41,15 @@ struct ata_scsi_args { enum { /* flags for ata_dev_read_id() */ ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */ + + /* selector for ata_down_xfermask_limit() */ + ATA_DNXFER_PIO = 0, /* speed down PIO */ + ATA_DNXFER_DMA = 1, /* speed down DMA */ + ATA_DNXFER_40C = 2, /* apply 40c cable limit */ + ATA_DNXFER_FORCE_PIO = 3, /* force PIO */ + ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */ + + ATA_DNXFER_QUIET = (1 << 31), }; extern struct workqueue_struct *ata_aux_wq; @@ -69,7 +78,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags); extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); -extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); +extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -150,7 +159,5 @@ extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); /* libata-sff.c */ extern u8 ata_irq_on(struct ata_port *ap); -/* pata_sis.c */ -extern struct ata_port_info sis_info133; #endif /* __LIBATA_H__ */ diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index ab44d18850f..a90ed00c07e 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -34,7 +34,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_ali" -#define DRV_VERSION "0.7.2" +#define DRV_VERSION "0.7.3" /* * Cable special cases diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 619e44b0403..3c760d0f471 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.2.7" +#define DRV_VERSION "0.2.8" /** * timing_setup - shared timing computation and load @@ -128,7 +128,7 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse static int amd_pre_reset(struct ata_port *ap) { - static const u32 bitmask[2] = {0x03, 0xC0}; + static const u32 bitmask[2] = {0x03, 0x0C}; static const struct pci_bits amd_enable_bits[] = { { 0x40, 1, 0x02, 0x02 }, { 0x40, 1, 0x01, 0x01 } @@ -247,7 +247,7 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) */ static int nv_pre_reset(struct ata_port *ap) { - static const u8 bitmask[2] = {0x03, 0xC0}; + static const u8 bitmask[2] = {0x03, 0x0C}; static const struct pci_bits nv_enable_bits[] = { { 0x50, 1, 0x02, 0x02 }, { 0x50, 1, 0x01, 0x01 } diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 1ce8fcfd782..c1334c6c415 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cs5520" -#define DRV_VERSION "0.6.3" +#define DRV_VERSION "0.6.4" struct pio_clocks { @@ -325,6 +325,30 @@ static int cs5520_reinit_one(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x60, pcicfg | 0x40); return ata_pci_device_resume(pdev); } + +/** + * cs5520_pci_device_suspend - device suspend + * @pdev: PCI device + * + * We have to cut and waste bits from the standard method because + * the 5520 is a bit odd and not just a pure ATA device. As a result + * we must not disable it. The needed code is short and this avoids + * chip specific mess in the core code. + */ + +static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + pci_save_state(pdev); + return 0; +} + /* For now keep DMA off. We can set it for all but A rev CS5510 once the core ATA code can handle it */ @@ -340,7 +364,7 @@ static struct pci_driver cs5520_pci_driver = { .id_table = pata_cs5520, .probe = cs5520_init_one, .remove = cs5520_remove_one, - .suspend = ata_pci_device_suspend, + .suspend = cs5520_pci_device_suspend, .resume = cs5520_reinit_one, }; diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 3d7b7d87ec6..78c7cdfff69 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -35,7 +35,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_cs5530" -#define DRV_VERSION "0.7.1" +#define DRV_VERSION "0.7.2" static void __iomem *cs5530_port_base(struct ata_port *ap) { diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 27d724b5eea..e7d33c628a6 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -27,7 +27,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.5.3" +#define DRV_VERSION "0.6.0" struct hpt_clock { u8 xfer_speed; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 4ffc392052c..f331eeeafa0 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.5.2" +#define DRV_VERSION "0.6.0" struct hpt_clock { u8 xfer_speed; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 1bf5ec18b2e..d5f2e85e28f 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.1.5" +#define DRV_VERSION "0.2.0" static struct scsi_host_template isapnp_sht = { .module = THIS_MODULE, diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 73394c75be4..903137a6da5 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -80,7 +80,7 @@ #define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.4" struct it821x_dev { @@ -503,10 +503,12 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ if (dma_enabled & (1 << (5 + i))) { + ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); dev->xfer_mode = XFER_MW_DMA_0; dev->xfer_shift = ATA_SHIFT_MWDMA; dev->flags &= ~ATA_DFLAG_PIO; } else { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 3222ac7b945..9a0523b5c94 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -23,15 +23,16 @@ #include <scsi/scsi_host.h> #define DRV_NAME "pata_ixp4xx_cf" -#define DRV_VERSION "0.1.1ac1" +#define DRV_VERSION "0.1.2" -static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev) +static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error) { int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_enabled(dev)) { + if (ata_dev_ready(dev)) { + ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 98c1fee4b30..6ee61c67163 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -64,7 +64,7 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_legacy" -#define DRV_VERSION "0.5.3" +#define DRV_VERSION "0.5.4" #define NR_HOST 6 diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 45215aa05e7..2389107a200 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -25,7 +25,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_oldpiix" -#define DRV_VERSION "0.5.3" +#define DRV_VERSION "0.5.4" /** * oldpiix_pre_reset - probe begin @@ -209,10 +209,9 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc) struct ata_device *adev = qc->dev; if (adev != ap->private_data) { + oldpiix_set_piomode(ap, adev); if (adev->dma_mode) oldpiix_set_dmamode(ap, adev); - else if (adev->pio_mode) - oldpiix_set_piomode(ap, adev); } return ata_qc_issue_prot(qc); } diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index da1aa148b37..1b3cd5369f0 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -34,7 +34,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_opti" -#define DRV_VERSION "0.2.7" +#define DRV_VERSION "0.2.8" enum { READ_REG = 0, /* index of Read cycle timing register */ diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index d80b36e209c..b76c976e505 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -33,7 +33,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_optidma" -#define DRV_VERSION "0.2.3" +#define DRV_VERSION "0.2.4" enum { READ_REG = 0, /* index of Read cycle timing register */ diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 8928a6dfac5..103720f873c 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.2.11" +#define DRV_VERSION "0.3.0" /* * Private data structure to glue stuff together @@ -319,14 +319,17 @@ static void pcmcia_remove_one(struct pcmcia_device *pdev) static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ + PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), - PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), + PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), - PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */ + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 61537873d28..93bcdadb7be 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -35,7 +35,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_pdc2027x" -#define DRV_VERSION "0.74-ac5" +#define DRV_VERSION "0.8" #undef PDC_DEBUG #ifdef PDC_DEBUG diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 6dd63413a52..80685388c2b 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -21,7 +21,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_pdc202xx_old" -#define DRV_VERSION "0.2.3" +#define DRV_VERSION "0.3.0" /** * pdc2024x_pre_reset - probe begin diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 479a326114e..02ea95fcba6 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -42,6 +42,7 @@ static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unuse dev->pio_mode = dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); } } return 0; diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 4362141976a..c2f87da6033 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -26,7 +26,7 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_qdi" -#define DRV_VERSION "0.2.4" +#define DRV_VERSION "0.3.0" #define NR_HOST 4 /* Two 6580s */ diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 71a2bac09e0..60fc598f765 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -71,6 +71,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused) dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); } } return 0; diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c new file mode 100644 index 00000000000..45866098fbf --- /dev/null +++ b/drivers/ata/pata_scc.c @@ -0,0 +1,1228 @@ +/* + * Support for IDE interfaces on Celleb platform + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This code is based on drivers/ata/ata_piix.c: + * Copyright 2003-2005 Red Hat Inc + * Copyright 2003-2005 Jeff Garzik + * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * + * and drivers/ata/ahci.c: + * Copyright 2004-2005 Red Hat, Inc. + * + * and drivers/ata/libata-core.c: + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_scc" +#define DRV_VERSION "0.1" + +#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 + +/* PCI BARs */ +#define SCC_CTRL_BAR 0 +#define SCC_BMID_BAR 1 + +/* offset of CTRL registers */ +#define SCC_CTL_PIOSHT 0x000 +#define SCC_CTL_PIOCT 0x004 +#define SCC_CTL_MDMACT 0x008 +#define SCC_CTL_MCRCST 0x00C +#define SCC_CTL_SDMACT 0x010 +#define SCC_CTL_SCRCST 0x014 +#define SCC_CTL_UDENVT 0x018 +#define SCC_CTL_TDVHSEL 0x020 +#define SCC_CTL_MODEREG 0x024 +#define SCC_CTL_ECMODE 0xF00 +#define SCC_CTL_MAEA0 0xF50 +#define SCC_CTL_MAEC0 0xF54 +#define SCC_CTL_CCKCTRL 0xFF0 + +/* offset of BMID registers */ +#define SCC_DMA_CMD 0x000 +#define SCC_DMA_STATUS 0x004 +#define SCC_DMA_TABLE_OFS 0x008 +#define SCC_DMA_INTMASK 0x010 +#define SCC_DMA_INTST 0x014 +#define SCC_DMA_PTERADD 0x018 +#define SCC_REG_CMD_ADDR 0x020 +#define SCC_REG_DATA 0x000 +#define SCC_REG_ERR 0x004 +#define SCC_REG_FEATURE 0x004 +#define SCC_REG_NSECT 0x008 +#define SCC_REG_LBAL 0x00C +#define SCC_REG_LBAM 0x010 +#define SCC_REG_LBAH 0x014 +#define SCC_REG_DEVICE 0x018 +#define SCC_REG_STATUS 0x01C +#define SCC_REG_CMD 0x01C +#define SCC_REG_ALTSTATUS 0x020 + +/* register value */ +#define TDVHSEL_MASTER 0x00000001 +#define TDVHSEL_SLAVE 0x00000004 + +#define MODE_JCUSFEN 0x00000080 + +#define ECMODE_VALUE 0x01 + +#define CCKCTRL_ATARESET 0x00040000 +#define CCKCTRL_BUFCNT 0x00020000 +#define CCKCTRL_CRST 0x00010000 +#define CCKCTRL_OCLKEN 0x00000100 +#define CCKCTRL_ATACLKOEN 0x00000002 +#define CCKCTRL_LCLKEN 0x00000001 + +#define QCHCD_IOS_SS 0x00000001 + +#define QCHSD_STPDIAG 0x00020000 + +#define INTMASK_MSK 0xD1000012 +#define INTSTS_SERROR 0x80000000 +#define INTSTS_PRERR 0x40000000 +#define INTSTS_RERR 0x10000000 +#define INTSTS_ICERR 0x01000000 +#define INTSTS_BMSINT 0x00000010 +#define INTSTS_BMHE 0x00000008 +#define INTSTS_IOIRQS 0x00000004 +#define INTSTS_INTRQ 0x00000002 +#define INTSTS_ACTEINT 0x00000001 + + +/* PIO transfer mode table */ +/* JCHST */ +static const unsigned long JCHSTtbl[2][7] = { + {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ + {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ +}; + +/* JCHHT */ +static const unsigned long JCHHTtbl[2][7] = { + {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ + {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ +}; + +/* JCHCT */ +static const unsigned long JCHCTtbl[2][7] = { + {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ + {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ +}; + +/* DMA transfer mode table */ +/* JCHDCTM/JCHDCTS */ +static const unsigned long JCHDCTxtbl[2][7] = { + {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ + {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ +}; + +/* JCSTWTM/JCSTWTS */ +static const unsigned long JCSTWTxtbl[2][7] = { + {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ + {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ +}; + +/* JCTSS */ +static const unsigned long JCTSStbl[2][7] = { + {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ + {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ +}; + +/* JCENVT */ +static const unsigned long JCENVTtbl[2][7] = { + {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ + {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ +}; + +/* JCACTSELS/JCACTSELM */ +static const unsigned long JCACTSELtbl[2][7] = { + {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ +}; + +static const struct pci_device_id scc_pci_tbl[] = { + {PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { } /* terminate list */ +}; + +/** + * scc_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; + void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; + void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT; + void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT; + unsigned long reg; + int offset; + + reg = in_be32(cckctrl_port); + if (reg & CCKCTRL_ATACLKOEN) + offset = 1; /* 133MHz */ + else + offset = 0; /* 100MHz */ + + reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; + out_be32(piosht_port, reg); + reg = JCHCTtbl[offset][pio]; + out_be32(pioct_port, reg); +} + +/** + * scc_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * @udma: udma mode, 0 - 6 + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int udma = adev->dma_mode; + unsigned int is_slave = (adev->devno != 0); + u8 speed = udma; + void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; + void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; + void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT; + void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST; + void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT; + void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST; + void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT; + void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL; + int offset, idx; + + if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN) + offset = 1; /* 133MHz */ + else + offset = 0; /* 100MHz */ + + if (speed >= XFER_UDMA_0) + idx = speed - XFER_UDMA_0; + else + return; + + if (is_slave) { + out_be32(sdmact_port, JCHDCTxtbl[offset][idx]); + out_be32(scrcst_port, JCSTWTxtbl[offset][idx]); + out_be32(tdvhsel_port, + (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2)); + } else { + out_be32(mdmact_port, JCHDCTxtbl[offset][idx]); + out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]); + out_be32(tdvhsel_port, + (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]); + } + out_be32(udenvt_port, + JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); +} + +/** + * scc_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Note: Original code is ata_tf_load(). + */ + +static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + out_be32(ioaddr->ctl_addr, tf->ctl); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + out_be32(ioaddr->feature_addr, tf->hob_feature); + out_be32(ioaddr->nsect_addr, tf->hob_nsect); + out_be32(ioaddr->lbal_addr, tf->hob_lbal); + out_be32(ioaddr->lbam_addr, tf->hob_lbam); + out_be32(ioaddr->lbah_addr, tf->hob_lbah); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + out_be32(ioaddr->feature_addr, tf->feature); + out_be32(ioaddr->nsect_addr, tf->nsect); + out_be32(ioaddr->lbal_addr, tf->lbal); + out_be32(ioaddr->lbam_addr, tf->lbam); + out_be32(ioaddr->lbah_addr, tf->lbah); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + out_be32(ioaddr->device_addr, tf->device); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * scc_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Note: Original code is ata_check_status(). + */ + +static u8 scc_check_status (struct ata_port *ap) +{ + return in_be32(ap->ioaddr.status_addr); +} + +/** + * scc_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Note: Original code is ata_tf_read(). + */ + +static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = scc_check_status(ap); + tf->feature = in_be32(ioaddr->error_addr); + tf->nsect = in_be32(ioaddr->nsect_addr); + tf->lbal = in_be32(ioaddr->lbal_addr); + tf->lbam = in_be32(ioaddr->lbam_addr); + tf->lbah = in_be32(ioaddr->lbah_addr); + tf->device = in_be32(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB); + tf->hob_feature = in_be32(ioaddr->error_addr); + tf->hob_nsect = in_be32(ioaddr->nsect_addr); + tf->hob_lbal = in_be32(ioaddr->lbal_addr); + tf->hob_lbam = in_be32(ioaddr->lbam_addr); + tf->hob_lbah = in_be32(ioaddr->lbah_addr); + } +} + +/** + * scc_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Note: Original code is ata_exec_command(). + */ + +static void scc_exec_command (struct ata_port *ap, + const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + out_be32(ap->ioaddr.command_addr, tf->command); + ata_pause(ap); +} + +/** + * scc_check_altstatus - Read device alternate status reg + * @ap: port where the device is + */ + +static u8 scc_check_altstatus (struct ata_port *ap) +{ + return in_be32(ap->ioaddr.altstatus_addr); +} + +/** + * scc_std_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Note: Original code is ata_std_dev_select(). + */ + +static void scc_std_dev_select (struct ata_port *ap, unsigned int device) +{ + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + out_be32(ap->ioaddr.device_addr, tmp); + ata_pause(ap); +} + +/** + * scc_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_setup(). + */ + +static void scc_bmdma_setup (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + /* load PRD table addr */ + out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma); + + /* specify data direction, triple-check start bit is clear */ + dmactl = in_be32(mmio + SCC_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + out_be32(mmio + SCC_DMA_CMD, dmactl); + + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * scc_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_start(). + */ + +static void scc_bmdma_start (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 dmactl; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + /* start host DMA transaction */ + dmactl = in_be32(mmio + SCC_DMA_CMD); + out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START); +} + +/** + * scc_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * Note: Original code is ata_devchk(). + */ + +static unsigned int scc_devchk (struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->dev_select(ap, device); + + out_be32(ioaddr->nsect_addr, 0x55); + out_be32(ioaddr->lbal_addr, 0xaa); + + out_be32(ioaddr->nsect_addr, 0xaa); + out_be32(ioaddr->lbal_addr, 0x55); + + out_be32(ioaddr->nsect_addr, 0x55); + out_be32(ioaddr->lbal_addr, 0xaa); + + nsect = in_be32(ioaddr->nsect_addr); + lbal = in_be32(ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * scc_bus_post_reset - PATA device post reset + * + * Note: Original code is ata_bus_post_reset(). + */ + +static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + unsigned long timeout; + + /* if device 0 was found in ata_devchk, wait for its + * BSY bit to clear + */ + if (dev0) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* if device 1 was found in ata_devchk, wait for + * register access, then wait for BSY to clear + */ + timeout = jiffies + ATA_TMOUT_BOOT; + while (dev1) { + u8 nsect, lbal; + + ap->ops->dev_select(ap, 1); + nsect = in_be32(ioaddr->nsect_addr); + lbal = in_be32(ioaddr->lbal_addr); + if ((nsect == 1) && (lbal == 1)) + break; + if (time_after(jiffies, timeout)) { + dev1 = 0; + break; + } + msleep(50); /* give drive a breather */ + } + if (dev1) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* is all this really necessary? */ + ap->ops->dev_select(ap, 0); + if (dev1) + ap->ops->dev_select(ap, 1); + if (dev0) + ap->ops->dev_select(ap, 0); +} + +/** + * scc_bus_softreset - PATA device software reset + * + * Note: Original code is ata_bus_softreset(). + */ + +static unsigned int scc_bus_softreset (struct ata_port *ap, + unsigned int devmask) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); + + /* software reset. causes dev0 to be selected */ + out_be32(ioaddr->ctl_addr, ap->ctl); + udelay(20); + out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST); + udelay(20); + out_be32(ioaddr->ctl_addr, ap->ctl); + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready + */ + msleep(150); + + /* Before we perform post reset processing we want to see if + * the bus shows 0xFF because the odd clown forgets the D7 + * pulldown resistor. + */ + if (scc_check_status(ap) == 0xFF) + return 0; + + scc_bus_post_reset(ap, devmask); + + return 0; +} + +/** + * scc_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Note: Original code is ata_std_softreset(). + */ + +static int scc_std_softreset (struct ata_port *ap, unsigned int *classes) +{ + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + DPRINTK("ENTER\n"); + + if (ata_port_offline(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; + } + + /* determine if device 0/1 are present */ + if (scc_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && scc_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + err_mask = scc_bus_softreset(ap, devmask); + if (err_mask) { + ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + out: + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} + +/** + * scc_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Command we are ending DMA for + */ + +static void scc_bmdma_stop (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; + void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR]; + u32 reg; + + while (1) { + reg = in_be32(bmid_base + SCC_DMA_INTST); + + if (reg & INTSTS_SERROR) { + printk(KERN_WARNING "%s: SERROR\n", DRV_NAME); + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT); + out_be32(bmid_base + SCC_DMA_CMD, + in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); + continue; + } + + if (reg & INTSTS_PRERR) { + u32 maea0, maec0; + maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0); + maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0); + printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0); + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT); + out_be32(bmid_base + SCC_DMA_CMD, + in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); + continue; + } + + if (reg & INTSTS_RERR) { + printk(KERN_WARNING "%s: Response Error\n", DRV_NAME); + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT); + out_be32(bmid_base + SCC_DMA_CMD, + in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); + continue; + } + + if (reg & INTSTS_ICERR) { + out_be32(bmid_base + SCC_DMA_CMD, + in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); + printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME); + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT); + continue; + } + + if (reg & INTSTS_BMSINT) { + unsigned int classes; + printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); + /* TBD: SW reset */ + scc_std_softreset(ap, &classes); + continue; + } + + if (reg & INTSTS_BMHE) { + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE); + continue; + } + + if (reg & INTSTS_ACTEINT) { + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT); + continue; + } + + if (reg & INTSTS_IOIRQS) { + out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS); + continue; + } + break; + } + + /* clear start/stop bit */ + out_be32(bmid_base + SCC_DMA_CMD, + in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_altstatus(ap); /* dummy read */ +} + +/** + * scc_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + */ + +static u8 scc_bmdma_status (struct ata_port *ap) +{ + u8 host_stat; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + host_stat = in_be32(mmio + SCC_DMA_STATUS); + + /* Workaround for PTERADD: emulate DMA_INTR when + * - IDE_STATUS[ERR] = 1 + * - INT_STATUS[INTRQ] = 1 + * - DMA_STATUS[IORACTA] = 1 + */ + if (!(host_stat & ATA_DMA_INTR)) { + u32 int_status = in_be32(mmio + SCC_DMA_INTST); + if (ata_altstatus(ap) & ATA_ERR && + int_status & INTSTS_INTRQ && + host_stat & ATA_DMA_ACTIVE) + host_stat |= ATA_DMA_INTR; + } + + return host_stat; +} + +/** + * scc_data_xfer - Transfer data by PIO + * @adev: device for this I/O + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Note: Original code is ata_data_xfer(). + */ + +static void scc_data_xfer (struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + unsigned int words = buflen >> 1; + unsigned int i; + u16 *buf16 = (u16 *) buf; + void __iomem *mmio = ap->ioaddr.data_addr; + + /* Transfer multiple of 2 bytes */ + if (write_data) { + for (i = 0; i < words; i++) + out_be32(mmio, cpu_to_le16(buf16[i])); + } else { + for (i = 0; i < words; i++) + buf16[i] = le16_to_cpu(in_be32(mmio)); + } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + out_be32(mmio, cpu_to_le16(align_buf[0])); + } else { + align_buf[0] = le16_to_cpu(in_be32(mmio)); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +/** + * scc_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Note: Original code is ata_irq_on(). + */ + +static u8 scc_irq_on (struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 tmp; + + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + out_be32(ioaddr->ctl_addr, ap->ctl); + tmp = ata_wait_idle(ap); + + ap->ops->irq_clear(ap); + + return tmp; +} + +/** + * scc_irq_ack - Acknowledge a device interrupt. + * @ap: Port on which interrupts are enabled. + * + * Note: Original code is ata_irq_ack(). + */ + +static u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq) +{ + unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; + u8 host_stat, post_stat, status; + + status = ata_busy_wait(ap, bits, 1000); + if (status & bits) + if (ata_msg_err(ap)) + printk(KERN_ERR "abnormal status 0x%X\n", status); + + /* get controller status; clear intr, err bits */ + host_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS); + out_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS, + host_stat | ATA_DMA_INTR | ATA_DMA_ERR); + + post_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS); + + if (ata_msg_intr(ap)) + printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", + __FUNCTION__, + host_stat, post_stat, status); + + return status; +} + +/** + * scc_bmdma_freeze - Freeze BMDMA controller port + * @ap: port to freeze + * + * Note: Original code is ata_bmdma_freeze(). + */ + +static void scc_bmdma_freeze (struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + out_be32(ioaddr->ctl_addr, ap->ctl); + + /* Under certain circumstances, some controllers raise IRQ on + * ATA_NIEN manipulation. Also, many controllers fail to mask + * previously pending IRQ on ATA_NIEN assertion. Clear it. + */ + ata_chk_status(ap); + + ap->ops->irq_clear(ap); +} + +/** + * scc_pata_prereset - prepare for reset + * @ap: ATA port to be reset + */ + +static int scc_pata_prereset (struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * scc_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * Note: Original code is ata_std_postreset(). + */ + +static void scc_std_postreset (struct ata_port *ap, unsigned int *classes) +{ + DPRINTK("ENTER\n"); + + /* re-enable interrupts */ + if (!ap->ops->error_handler) + ap->ops->irq_on(ap); + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* set up device control */ + if (ap->ioaddr.ctl_addr) + out_be32(ap->ioaddr.ctl_addr, ap->ctl); + + DPRINTK("EXIT\n"); +} + +/** + * scc_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + */ + +static void scc_error_handler (struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL, + scc_std_postreset); +} + +/** + * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_irq_clear(). + */ + +static void scc_bmdma_irq_clear (struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + if (!mmio) + return; + + out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS)); +} + +/** + * scc_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Allocate space for PRD table using ata_port_start(). + * Set PRD table address for PTERADD. (PRD Transfer End Read) + */ + +static int scc_port_start (struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + + out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma); + return 0; +} + +/** + * scc_port_stop - Undo scc_port_start() + * @ap: Port to shut down + * + * Reset PTERADD. + */ + +static void scc_port_stop (struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + out_be32(mmio + SCC_DMA_PTERADD, 0); +} + +static struct scsi_host_template scc_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +}; + +static const struct ata_port_operations scc_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = scc_set_piomode, + .set_dmamode = scc_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = scc_tf_load, + .tf_read = scc_tf_read, + .exec_command = scc_exec_command, + .check_status = scc_check_status, + .check_altstatus = scc_check_altstatus, + .dev_select = scc_std_dev_select, + + .bmdma_setup = scc_bmdma_setup, + .bmdma_start = scc_bmdma_start, + .bmdma_stop = scc_bmdma_stop, + .bmdma_status = scc_bmdma_status, + .data_xfer = scc_data_xfer, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .freeze = scc_bmdma_freeze, + .error_handler = scc_error_handler, + .post_internal_cmd = scc_bmdma_stop, + + .irq_handler = ata_interrupt, + .irq_clear = scc_bmdma_irq_clear, + .irq_on = scc_irq_on, + .irq_ack = scc_irq_ack, + + .port_start = scc_port_start, + .port_stop = scc_port_stop, +}; + +static struct ata_port_info scc_port_info[] = { + { + .sht = &scc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x00, + .udma_mask = ATA_UDMA6, + .port_ops = &scc_pata_ops, + }, +}; + +/** + * scc_reset_controller - initialize SCC PATA controller. + */ + +static int scc_reset_controller(struct ata_probe_ent *probe_ent) +{ + void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR]; + void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR]; + void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; + void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; + void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; + void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK; + void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS; + u32 reg = 0; + + out_be32(cckctrl_port, reg); + reg |= CCKCTRL_ATACLKOEN; + out_be32(cckctrl_port, reg); + reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; + out_be32(cckctrl_port, reg); + reg |= CCKCTRL_CRST; + out_be32(cckctrl_port, reg); + + for (;;) { + reg = in_be32(cckctrl_port); + if (reg & CCKCTRL_CRST) + break; + udelay(5000); + } + + reg |= CCKCTRL_ATARESET; + out_be32(cckctrl_port, reg); + out_be32(ecmode_port, ECMODE_VALUE); + out_be32(mode_port, MODE_JCUSFEN); + out_be32(intmask_port, INTMASK_MSK); + + if (in_be32(dmastatus_port) & QCHSD_STPDIAG) { + printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME); + return -EIO; + } + + return 0; +} + +/** + * scc_setup_ports - initialize ioaddr with SCC PATA port offsets. + * @ioaddr: IO address structure to be initialized + * @base: base address of BMID region + */ + +static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) +{ + ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR; + ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; + ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; + ioaddr->bmdma_addr = base; + ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA; + ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR; + ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE; + ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT; + ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL; + ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM; + ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH; + ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE; + ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS; + ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; +} + +static int scc_host_init(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + int rc; + + rc = scc_reset_controller(probe_ent); + if (rc) + return rc; + + probe_ent->n_ports = 1; + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + + scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]); + + pci_set_master(pdev); + + return 0; +} + +/** + * scc_init_one - Register SCC PATA device with kernel services + * @pdev: PCI device to register + * @ent: Entry in scc_pci_tbl matching with @pdev + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int board_idx = (unsigned int) ent->driver_data; + struct device *dev = &pdev->dev; + struct ata_probe_ent *probe_ent; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + + probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + return -ENOMEM; + + probe_ent->dev = dev; + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = scc_port_info[board_idx].sht; + probe_ent->port_flags = scc_port_info[board_idx].flags; + probe_ent->pio_mask = scc_port_info[board_idx].pio_mask; + probe_ent->udma_mask = scc_port_info[board_idx].udma_mask; + probe_ent->port_ops = scc_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->iomap = pcim_iomap_table(pdev); + + rc = scc_host_init(probe_ent); + if (rc) + return rc; + + if (!ata_device_add(probe_ent)) + return -ENODEV; + + devm_kfree(dev, probe_ent); + return 0; +} + +static struct pci_driver scc_pci_driver = { + .name = DRV_NAME, + .id_table = scc_pci_tbl, + .probe = scc_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static int __init scc_init (void) +{ + int rc; + + DPRINTK("pci_register_driver\n"); + rc = pci_register_driver(&scc_pci_driver); + if (rc) + return rc; + + DPRINTK("done\n"); + return 0; +} + +static void __exit scc_exit (void) +{ + pci_unregister_driver(&scc_pci_driver); +} + +module_init(scc_init); +module_exit(scc_exit); + +MODULE_AUTHOR("Toshiba corp"); +MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, scc_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index ad5b43fef3d..dde7eb9f72b 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_serverworks" -#define DRV_VERSION "0.3.9" +#define DRV_VERSION "0.4.0" #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ #define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index ed79fabe025..1cb67b221c2 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -33,7 +33,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sil680" -#define DRV_VERSION "0.4.1" +#define DRV_VERSION "0.4.5" /** * sil680_selreg - return register base @@ -139,10 +139,13 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) unsigned long tfaddr = sil680_selreg(ap, 0x02); unsigned long addr = sil680_seldev(ap, adev, 0x04); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int pio = adev->pio_mode - XFER_PIO_0; int lowest_pio = pio; + int port_shift = 4 * adev->devno; u16 reg; + u8 mode; struct ata_device *pair = ata_dev_pair(adev); @@ -153,10 +156,17 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]); pci_read_config_word(pdev, tfaddr-2, ®); + pci_read_config_byte(pdev, addr_mask, &mode); + reg &= ~0x0200; /* Clear IORDY */ - if (ata_pio_need_iordy(adev)) + mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */ + + if (ata_pio_need_iordy(adev)) { reg |= 0x0200; /* Enable IORDY */ + mode |= 1 << port_shift; + } pci_write_config_word(pdev, tfaddr-2, reg); + pci_write_config_byte(pdev, addr_mask, mode); } /** diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 560103d55b2..be300923b27 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -32,11 +32,10 @@ #include <scsi/scsi_host.h> #include <linux/libata.h> #include <linux/ata.h> -#include "libata.h" +#include "sis.h" -#undef DRV_NAME /* already defined in libata.h, for libata-core */ #define DRV_NAME "pata_sis" -#define DRV_VERSION "0.4.5" +#define DRV_VERSION "0.5.0" struct sis_chipset { u16 device; /* PCI host ID */ @@ -151,7 +150,7 @@ static int sis_66_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { ata_port_disable(ap); - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); return 0; } /* Older chips keep cable detect in bits 4/5 of reg 0x48 */ @@ -197,7 +196,7 @@ static int sis_old_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { ata_port_disable(ap); - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); return 0; } ap->cbl = ATA_CBL_PATA40; diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 96e890fd645..13e81f0ef1f 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -7,6 +7,13 @@ * SL82C105/Winbond 553 IDE driver * * and in part on the documentation and errata sheet + * + * + * Note: The controller like many controllers has shared timings for + * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back + * in the dma_stop function. Thus we actually don't need a set_dmamode + * method as the PIO method is always called and will set the right PIO + * timing parameters. */ #include <linux/kernel.h> @@ -19,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sl82c105" -#define DRV_VERSION "0.2.3" +#define DRV_VERSION "0.3.0" enum { /* @@ -126,33 +133,6 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a } /** - * sl82c105_set_dmamode - set initial DMA mode data - * @ap: ATA interface - * @adev: ATA device - * - * Called to do the DMA mode setup. This replaces the PIO timings - * for the device in question. Set appropriate PIO timings not DMA - * timings at this point. - */ - -static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - switch(adev->dma_mode) { - case XFER_MW_DMA_0: - sl82c105_configure_piomode(ap, adev, 0); - break; - case XFER_MW_DMA_1: - sl82c105_configure_piomode(ap, adev, 3); - break; - case XFER_MW_DMA_2: - sl82c105_configure_piomode(ap, adev, 4); - break; - default: - BUG(); - } -} - -/** * sl82c105_reset_engine - Reset the DMA engine * @ap: ATA interface * @@ -222,7 +202,7 @@ static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) /* This will redo the initial setup of the DMA device to matching PIO timings */ - sl82c105_set_dmamode(ap, qc->dev); + sl82c105_set_piomode(ap, qc->dev); } static struct scsi_host_template sl82c105_sht = { @@ -246,7 +226,6 @@ static struct scsi_host_template sl82c105_sht = { static struct ata_port_operations sl82c105_port_ops = { .port_disable = ata_port_disable, .set_piomode = sl82c105_set_piomode, - .set_dmamode = sl82c105_set_dmamode, .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 220fcd6c549..20fc2d0dcfa 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -170,7 +170,7 @@ static int via_pre_reset(struct ata_port *ap) ap->cbl = ATA_CBL_PATA40; else ap->cbl = ATA_CBL_PATA_UNK; - + return ata_std_prereset(ap); } diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 0888b4f19f4..6c111035fc8 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -17,7 +17,7 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_winbond" -#define DRV_VERSION "0.0.1" +#define DRV_VERSION "0.0.2" #define NR_HOST 4 /* Two winbond controllers, two channels each */ diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 857ac23217a..5dd3ca8b5f2 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.04" +#define DRV_VERSION "0.05" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) @@ -498,7 +498,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host) if ((status & ATA_BUSY)) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); + ap->print_id, qc->tf.protocol, status); /* complete taskfile transaction */ pp->state = adma_state_idle; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index d689df52eae..a65ba636aaa 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -35,7 +35,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.7" +#define DRV_VERSION "0.8" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -137,14 +137,19 @@ enum { PCI_ERR = (1 << 18), TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ + PORTS_0_3_COAL_DONE = (1 << 8), + PORTS_4_7_COAL_DONE = (1 << 17), PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ GPIO_INT = (1 << 22), SELF_INT = (1 << 23), TWSI_INT = (1 << 24), HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ + HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */ HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | HC_MAIN_RSVD), + HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | + HC_MAIN_RSVD_5), /* SATAHC registers */ HC_CFG_OFS = 0, @@ -814,23 +819,27 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) u32 cfg = readl(port_mmio + EDMA_CFG_OFS); /* set up non-NCQ EDMA configuration */ - cfg &= ~0x1f; /* clear queue depth */ - cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ cfg &= ~(1 << 9); /* disable equeue */ - if (IS_GEN_I(hpriv)) + if (IS_GEN_I(hpriv)) { + cfg &= ~0x1f; /* clear queue depth */ cfg |= (1 << 8); /* enab config burst size mask */ + } - else if (IS_GEN_II(hpriv)) + else if (IS_GEN_II(hpriv)) { + cfg &= ~0x1f; /* clear queue depth */ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */ + } else if (IS_GEN_IIE(hpriv)) { - cfg |= (1 << 23); /* dis RX PM port mask */ - cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ + cfg |= (1 << 22); /* enab 4-entry host queue cache */ cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ cfg |= (1 << 18); /* enab early completion */ - cfg |= (1 << 17); /* enab host q cache */ - cfg |= (1 << 22); /* enab cutthrough */ + cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */ + cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */ } writelfl(cfg, port_mmio + EDMA_CFG_OFS); @@ -1276,7 +1285,7 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed) pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; } DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " - "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); + "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -2052,7 +2061,7 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; /* unused: */ - port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL; /* Clear any currently outstanding port interrupt conditions */ serr_ofs = mv_scr_offset(SCR_ERROR); @@ -2240,7 +2249,11 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, /* and unmask interrupt generation for host regs */ writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); - writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); + + if (IS_50XX(hpriv)) + writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS); + else + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " "PCI int cause/mask=0x%08x/0x%08x\n", @@ -2347,7 +2360,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; /* Enable interrupts */ - if (msi && !pci_enable_msi(pdev)) + if (msi && pci_enable_msi(pdev)) pci_intx(pdev, 1); mv_dump_pci_cfg(pdev, 0x68); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index ab92f208dae..30eed12b363 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -219,6 +219,7 @@ struct nv_adma_port_priv { void __iomem * gen_block; void __iomem * notifier_clear_block; u8 flags; + int last_issue_ncq; }; struct nv_host_priv { @@ -254,10 +255,7 @@ static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg); static int nv_adma_port_resume(struct ata_port *ap); static void nv_adma_error_handler(struct ata_port *ap); static void nv_adma_host_stop(struct ata_host *host); -static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc); -static void nv_adma_bmdma_start(struct ata_queued_cmd *qc); -static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc); -static u8 nv_adma_bmdma_status(struct ata_port *ap); +static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc); enum nv_host_type { @@ -432,16 +430,16 @@ static const struct ata_port_operations nv_adma_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .bmdma_setup = nv_adma_bmdma_setup, - .bmdma_start = nv_adma_bmdma_start, - .bmdma_stop = nv_adma_bmdma_stop, - .bmdma_status = nv_adma_bmdma_status, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, .qc_prep = nv_adma_qc_prep, .qc_issue = nv_adma_qc_issue, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, .error_handler = nv_adma_error_handler, - .post_internal_cmd = nv_adma_bmdma_stop, + .post_internal_cmd = nv_adma_post_internal_cmd, .data_xfer = ata_data_xfer, .irq_handler = nv_adma_interrupt, .irq_clear = nv_adma_irq_clear, @@ -661,30 +659,31 @@ static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb) { unsigned int idx = 0; - cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB); - - if ((tf->flags & ATA_TFLAG_LBA48) == 0) { - cpb[idx++] = cpu_to_le16(IGN); - cpb[idx++] = cpu_to_le16(IGN); - cpb[idx++] = cpu_to_le16(IGN); - cpb[idx++] = cpu_to_le16(IGN); - cpb[idx++] = cpu_to_le16(IGN); - } - else { - cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature); - cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect); - cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal); - cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam); - cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah); + if(tf->flags & ATA_TFLAG_ISADDR) { + if (tf->flags & ATA_TFLAG_LBA48) { + cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB); + cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah); + cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature); + } else + cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB); + + cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam); + cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah); } - cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature); - cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect); - cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal); - cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam); - cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah); + + if(tf->flags & ATA_TFLAG_DEVICE) + cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device); cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND); + while(idx < 12) + cpb[idx++] = cpu_to_le16(IGN); + return idx; } @@ -741,6 +740,17 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num, qc->err_mask); ata_qc_complete(qc); + } else { + struct ata_eh_info *ehi = &ap->eh_info; + /* Notifier bits set without a command may indicate the drive + is misbehaving. Raise host state machine violation on this + condition. */ + ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n", + cpb_num); + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); + return 1; } } return 0; @@ -852,22 +862,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) if (status & (NV_ADMA_STAT_DONE | NV_ADMA_STAT_CPBERR)) { + u32 check_commands = notifier | notifier_error; + int pos, error = 0; /** Check CPBs for completed commands */ - - if (ata_tag_valid(ap->active_tag)) { - /* Non-NCQ command */ - nv_adma_check_cpb(ap, ap->active_tag, - notifier_error & (1 << ap->active_tag)); - } else { - int pos, error = 0; - u32 active = ap->sactive; - - while ((pos = ffs(active)) && !error) { - pos--; - error = nv_adma_check_cpb(ap, pos, - notifier_error & (1 << pos) ); - active &= ~(1 << pos ); - } + while ((pos = ffs(check_commands)) && !error) { + pos--; + error = nv_adma_check_cpb(ap, pos, + notifier_error & (1 << pos) ); + check_commands &= ~(1 << pos ); } } } @@ -905,73 +907,12 @@ static void nv_adma_irq_clear(struct ata_port *ap) iowrite8(ioread8(dma_stat_addr), dma_stat_addr); } -static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - struct nv_adma_port_priv *pp = ap->private_data; - u8 dmactl; - - if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) { - WARN_ON(1); - return; - } - - /* load PRD table addr. */ - iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - - iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ata_exec_command(ap, &qc->tf); -} - -static void nv_adma_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct nv_adma_port_priv *pp = ap->private_data; - u8 dmactl; - - if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) { - WARN_ON(1); - return; - } - - /* start host DMA transaction */ - dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - iowrite8(dmactl | ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -} - -static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct nv_adma_port_priv *pp = ap->private_data; - - if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) - return; - - /* clear start/stop bit */ - iowrite8(ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ -} - -static u8 nv_adma_bmdma_status(struct ata_port *ap) +static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc) { - struct nv_adma_port_priv *pp = ap->private_data; - - WARN_ON(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)); + struct nv_adma_port_priv *pp = qc->ap->private_data; - return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) + ata_bmdma_post_internal_cmd(qc); } static int nv_adma_port_start(struct ata_port *ap) @@ -1040,14 +981,15 @@ static int nv_adma_port_start(struct ata_port *ap) /* clear GO for register mode, enable interrupt */ tmp = readw(mmio + NV_ADMA_CTL); - writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL); + writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN | + NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL); tmp = readw(mmio + NV_ADMA_CTL); writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); - readl( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw( mmio + NV_ADMA_CTL ); /* flush posted write */ udelay(1); writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); - readl( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw( mmio + NV_ADMA_CTL ); /* flush posted write */ return 0; } @@ -1099,14 +1041,15 @@ static int nv_adma_port_resume(struct ata_port *ap) /* clear GO for register mode, enable interrupt */ tmp = readw(mmio + NV_ADMA_CTL); - writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL); + writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN | + NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL); tmp = readw(mmio + NV_ADMA_CTL); writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); - readl( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw( mmio + NV_ADMA_CTL ); /* flush posted write */ udelay(1); writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); - readl( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw( mmio + NV_ADMA_CTL ); /* flush posted write */ return 0; } @@ -1163,11 +1106,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc, int idx, struct nv_adma_prd *aprd) { - u8 flags; - - memset(aprd, 0, sizeof(struct nv_adma_prd)); - - flags = 0; + u8 flags = 0; if (qc->tf.flags & ATA_TFLAG_WRITE) flags |= NV_APRD_WRITE; if (idx == qc->n_elem - 1) @@ -1178,6 +1117,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc, aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg))); aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */ aprd->flags = flags; + aprd->packet_len = 0; } static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb) @@ -1198,6 +1138,8 @@ static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb) } if (idx > 5) cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag))); + else + cpb->next_aprd = cpu_to_le64(0); } static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc) @@ -1230,7 +1172,10 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc) return; } - memset(cpb, 0, sizeof(struct nv_adma_cpb)); + cpb->resp_flags = NV_CPB_RESP_DONE; + wmb(); + cpb->ctl_flags = 0; + wmb(); cpb->len = 3; cpb->tag = qc->tag; @@ -1254,12 +1199,15 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc) finished filling in all of the contents */ wmb(); cpb->ctl_flags = ctl_flags; + wmb(); + cpb->resp_flags = 0; } static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc) { struct nv_adma_port_priv *pp = qc->ap->private_data; void __iomem *mmio = pp->ctl_block; + int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ); VPRINTK("ENTER\n"); @@ -1274,6 +1222,14 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc) /* write append register, command tag in lower 8 bits and (number of cpbs to append -1) in top 8 bits */ wmb(); + + if(curr_ncq != pp->last_issue_ncq) { + /* Seems to need some delay before switching between NCQ and non-NCQ + commands, else we get command timeouts and such. */ + udelay(20); + pp->last_issue_ncq = curr_ncq; + } + writew(qc->tag, mmio + NV_ADMA_APPEND); DPRINTK("Issued tag %u\n",qc->tag); @@ -1447,6 +1403,30 @@ static void nv_adma_error_handler(struct ata_port *ap) int i; u16 tmp; + if(ata_tag_valid(ap->active_tag) || ap->sactive) { + u32 notifier = readl(mmio + NV_ADMA_NOTIFIER); + u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); + u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); + u32 status = readw(mmio + NV_ADMA_STAT); + u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT); + u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX); + + ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X " + "notifier_error 0x%X gen_ctl 0x%X status 0x%X " + "next cpb count 0x%X next cpb idx 0x%x\n", + notifier, notifier_error, gen_ctl, status, + cpb_count, next_cpb_idx); + + for( i=0;i<NV_ADMA_MAX_CPBS;i++) { + struct nv_adma_cpb *cpb = &pp->cpb[i]; + if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) || + ap->sactive & (1 << i) ) + ata_port_printk(ap, KERN_ERR, + "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n", + i, cpb->ctl_flags, cpb->resp_flags); + } + } + /* Push us back into port register mode for error handling. */ nv_adma_register_mode(ap); @@ -1460,10 +1440,10 @@ static void nv_adma_error_handler(struct ata_port *ap) /* Reset channel */ tmp = readw(mmio + NV_ADMA_CTL); writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); - readl( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw( mmio + NV_ADMA_CTL ); /* flush posted write */ udelay(1); writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); - readl( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw( mmio + NV_ADMA_CTL ); /* flush posted write */ } ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index cf9ed8c3930..2339813ce9f 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -45,7 +45,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.05" +#define DRV_VERSION "2.00" enum { @@ -218,6 +218,7 @@ static const struct ata_port_operations pdc_pata_ops = { .freeze = pdc_freeze, .thaw = pdc_thaw, .error_handler = pdc_error_handler, + .post_internal_cmd = pdc_post_internal_cmd, .data_xfer = ata_data_xfer, .irq_handler = pdc_interrupt, .irq_clear = pdc_irq_clear, @@ -776,7 +777,8 @@ static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc) return pdc_check_atapi_dma(qc); } -static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) +static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base, + void __iomem *scr_addr) { port->cmd_addr = base; port->data_addr = base; @@ -791,6 +793,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) port->status_addr = base + 0x1c; port->altstatus_addr = port->ctl_addr = base + 0x38; + port->scr_addr = scr_addr; } @@ -903,11 +906,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e base = probe_ent->iomap[PDC_MMIO_BAR]; - pdc_ata_setup_port(&probe_ent->port[0], base + 0x200); - pdc_ata_setup_port(&probe_ent->port[1], base + 0x280); - - probe_ent->port[0].scr_addr = base + 0x400; - probe_ent->port[1].scr_addr = base + 0x500; + pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400); + pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500); /* notice 4-port boards */ switch (board_idx) { @@ -916,12 +916,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* Fall through */ case board_20319: probe_ent->n_ports = 4; - - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); - - probe_ent->port[2].scr_addr = base + 0x600; - probe_ent->port[3].scr_addr = base + 0x700; + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600); + pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700); break; case board_2057x: hp->flags |= PDC_FLAG_GEN_II; @@ -931,7 +927,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e tmp = readb(base + PDC_FLASH_CTL+1); if (!(tmp & 0x80)) { probe_ent->n_ports = 3; - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL); hp->port_flags[2] = ATA_FLAG_SLAVE_POSS; printk(KERN_INFO DRV_NAME " PATA port found\n"); } else @@ -941,12 +937,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e break; case board_20619: probe_ent->n_ports = 4; - - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); - - probe_ent->port[2].scr_addr = base + 0x600; - probe_ent->port[3].scr_addr = base + 0x700; + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL); + pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL); break; default: BUG(); diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 6097d8f2a0c..8786b45f291 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -39,7 +39,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.06" +#define DRV_VERSION "0.07" enum { QS_MMIO_BAR = 4, @@ -446,7 +446,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host) if ((status & ATA_BUSY)) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); + ap->print_id, qc->tf.protocol, status); /* complete taskfile transaction */ pp->state = qs_state_idle; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index dca3d3749f0..f7179c646be 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.0" +#define DRV_VERSION "2.1" enum { SIL_MMIO_BAR = 5, @@ -339,7 +339,7 @@ static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_re break; } - return 0; + return NULL; } static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) @@ -386,9 +386,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) goto freeze; } - if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) + if (unlikely(!qc)) goto freeze; + if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) { + /* this sometimes happens, just clear IRQ */ + ata_chk_status(ap); + return; + } + /* Check whether we are expecting interrupt in this state */ switch (ap->hsm_task_state) { case HSM_ST_FIRST: diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index e65e8d55da3..5d083f43f90 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -30,7 +30,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.3" +#define DRV_VERSION "0.8" /* * Port request block (PRB) 32 bytes diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 49c9e2bd706..1879e0cd56a 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -40,9 +40,8 @@ #include <linux/device.h> #include <scsi/scsi_host.h> #include <linux/libata.h> -#include "libata.h" +#include "sis.h" -#undef DRV_NAME /* already defined in libata.h, for libata-core */ #define DRV_NAME "sata_sis" #define DRV_VERSION "0.7" @@ -310,7 +309,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) case 0x10: ppi[1] = &sis_info133; break; - + case 0x30: ppi[0] = &sis_info133; break; diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 4e428999420..b121195cc59 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -53,7 +53,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "2.0" +#define DRV_VERSION "2.1" enum { K2_FLAG_NO_ATAPI_DMA = (1 << 29), diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 0ebd77b080d..1a081c3a8c0 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -44,7 +44,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.9" +#define DRV_VERSION "0.10" enum { @@ -421,7 +421,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); - VPRINTK("ata%u: ENTER\n", ap->id); + VPRINTK("ata%u: ENTER\n", ap->print_id); /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -478,7 +478,7 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) unsigned int portno = ap->port_no; unsigned int i; - VPRINTK("ata%u: ENTER\n", ap->id); + VPRINTK("ata%u: ENTER\n", ap->print_id); /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -605,7 +605,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; - VPRINTK("ata%u: ENTER\n", ap->id); + VPRINTK("ata%u: ENTER\n", ap->print_id); wmb(); /* flush PRD, pkt writes */ @@ -672,7 +672,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, /* step two - DMA from DIMM to host */ if (doing_hdma) { - VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id, + VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->print_id, readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); /* get drive status; clear intr; complete txn */ qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); @@ -683,7 +683,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, /* step one - exec ATA command */ else { u8 seq = (u8) (port_no + 1 + 4); - VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id, + VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->print_id, readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); /* submit hdma pkt */ @@ -698,7 +698,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, /* step one - DMA from host to DIMM */ if (doing_hdma) { u8 seq = (u8) (port_no + 1); - VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id, + VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->print_id, readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); /* submit ata pkt */ @@ -711,7 +711,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, /* step two - execute ATA command */ else { - VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id, + VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->print_id, readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); /* get drive status; clear intr; complete txn */ qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 80131eec68f..d659ace80f4 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -36,7 +36,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_uli" -#define DRV_VERSION "1.0" +#define DRV_VERSION "1.1" enum { uli_5289 = 0, diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index baca6d79bb0..598e6a26a48 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_via" -#define DRV_VERSION "2.0" +#define DRV_VERSION "2.1" enum board_ids_enum { vt6420, @@ -60,7 +60,7 @@ enum { SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ PATA_PIO_TIMING = 0xAB, /* PATA timing register */ - + PORT0 = (1 << 1), PORT1 = (1 << 0), ALL_PORTS = PORT0 | PORT1, @@ -151,7 +151,7 @@ static const struct ata_port_operations vt6420_sata_ops = { static const struct ata_port_operations vt6421_pata_ops = { .port_disable = ata_port_disable, - + .set_piomode = vt6421_set_pio_mode, .set_dmamode = vt6421_set_dma_mode, @@ -185,7 +185,7 @@ static const struct ata_port_operations vt6421_pata_ops = { static const struct ata_port_operations vt6421_sata_ops = { .port_disable = ata_port_disable, - + .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) { struct ata_probe_ent *probe_ent; struct ata_port_info *ppi[2]; - void __iomem * const *iomap; + void __iomem *bar5; ppi[0] = ppi[1] = &vt6420_port_info; probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; - iomap = pcim_iomap_table(pdev); - probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0); - probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1); + bar5 = pcim_iomap(pdev, 5, 0); + if (!bar5) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return NULL; + } + + probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0); + probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1); return probe_ent; } @@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) probe_ent->mwdma_mask = 0x07; probe_ent->udma_mask = 0x7f; + for (i = 0; i < 6; i++) + if (!pcim_iomap(pdev, i, 0)) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to iomap PCI BAR %d\n", i); + return NULL; + } + for (i = 0; i < N_PORTS; i++) vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i); @@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME); + rc = pci_request_regions(pdev, DRV_NAME); if (rc) { pcim_pin_device(pdev); return rc; diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 2fd037bde09..170bad1b415 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -47,7 +47,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_vsc" -#define DRV_VERSION "2.0" +#define DRV_VERSION "2.1" enum { VSC_MMIO_BAR = 0, @@ -98,10 +98,6 @@ enum { VSC_SATA_INT_PHY_CHANGE), }; -#define is_vsc_sata_int_err(port_idx, int_status) \ - (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx))) - - static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) @@ -119,6 +115,28 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, } +static void vsc_freeze(struct ata_port *ap) +{ + void __iomem *mask_addr; + + mask_addr = ap->host->iomap[VSC_MMIO_BAR] + + VSC_SATA_INT_MASK_OFFSET + ap->port_no; + + writeb(0, mask_addr); +} + + +static void vsc_thaw(struct ata_port *ap) +{ + void __iomem *mask_addr; + + mask_addr = ap->host->iomap[VSC_MMIO_BAR] + + VSC_SATA_INT_MASK_OFFSET + ap->port_no; + + writeb(0xff, mask_addr); +} + + static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { void __iomem *mask_addr; @@ -203,6 +221,36 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) } } +static inline void vsc_error_intr(u8 port_status, struct ata_port *ap) +{ + if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M)) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void vsc_port_intr(u8 port_status, struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + int handled = 0; + + if (unlikely(port_status & VSC_SATA_INT_ERROR)) { + vsc_error_intr(port_status, ap); + return; + } + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING))) + handled = ata_host_intr(ap, qc); + + /* We received an interrupt during a polled command, + * or some other spurious condition. Interrupt reporting + * with this hardware is fairly reliable so it is safe to + * simply clear the interrupt + */ + if (unlikely(!handled)) + ata_chk_status(ap); +} /* * vsc_sata_interrupt @@ -214,59 +262,36 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance) struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; - u32 int_status; - - spin_lock(&host->lock); + u32 status; - int_status = readl(host->iomap[VSC_MMIO_BAR] + - VSC_SATA_INT_STAT_OFFSET); + status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET); - for (i = 0; i < host->n_ports; i++) { - if (int_status & ((u32) 0xFF << (8 * i))) { - struct ata_port *ap; + if (unlikely(status == 0xffffffff || status == 0)) { + if (status) + dev_printk(KERN_ERR, host->dev, + ": IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } - ap = host->ports[i]; + spin_lock(&host->lock); - if (is_vsc_sata_int_err(i, int_status)) { - u32 err_status; - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); - err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - handled++; - } + for (i = 0; i < host->n_ports; i++) { + u8 port_status = (status >> (8 * i)) & 0xff; + if (port_status) { + struct ata_port *ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += ata_host_intr(ap, qc); - else if (is_vsc_sata_int_err(i, int_status)) { - /* - * On some chips (i.e. Intel 31244), an error - * interrupt will sneak in at initialization - * time (phy state changes). Clearing the SCR - * error register is not required, but it prevents - * the phy state change interrupts from recurring - * later. - */ - u32 err_status; - err_status = vsc_sata_scr_read(ap, SCR_ERROR); - printk(KERN_DEBUG "%s: clearing interrupt, " - "status %x; sata err status %x\n", - __FUNCTION__, - int_status, err_status); - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - /* Clear interrupt status */ - ata_chk_status(ap); - handled++; - } - } + vsc_port_intr(port_status, ap); + handled++; + } else + dev_printk(KERN_ERR, host->dev, + ": interrupt from disabled port %d\n", i); } } spin_unlock(&host->lock); - +out: return IRQ_RETVAL(handled); } @@ -304,8 +329,8 @@ static const struct ata_port_operations vsc_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, + .freeze = vsc_freeze, + .thaw = vsc_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = vsc_sata_interrupt, diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h new file mode 100644 index 00000000000..231da8fc220 --- /dev/null +++ b/drivers/ata/sis.h @@ -0,0 +1,5 @@ + +struct ata_port_info; + +/* pata_sis.c */ +extern struct ata_port_info sis_info133; diff --git a/include/linux/ata.h b/include/linux/ata.h index 272736e3799..c331da2da5f 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -282,7 +282,6 @@ struct ata_taskfile { }; #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) -#define ata_id_is_sata(id) ((id)[93] == 0) #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6)) #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5)) #define ata_id_hpa_enabled(id) ((id)[85] & (1 << 10)) @@ -324,6 +323,11 @@ static inline unsigned int ata_id_major_version(const u16 *id) return mver; } +static inline int ata_id_is_sata(const u16 *id) +{ + return ata_id_major_version(id) >= 5 && id[93] == 0; +} + static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command @@ -350,7 +354,7 @@ static inline int ata_id_is_cfa(const u16 *id) static inline int ata_drive_40wire(const u16 *dev_id) { - if (ata_id_major_version(dev_id) >= 5 && ata_id_is_sata(dev_id)) + if (ata_id_is_sata(dev_id)) return 0; /* SATA */ if ((dev_id[93] & 0xE000) == 0x6000) return 0; /* 80 wire */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 86762a9f52b..045fb3a72d5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -495,6 +495,7 @@ struct ata_device { /* error history */ struct ata_ering ering; + int spdn_cnt; unsigned int horkage; /* List of broken features */ #ifdef CONFIG_SATA_ACPI /* ACPI objects info */ @@ -535,8 +536,8 @@ struct ata_port { spinlock_t *lock; unsigned long flags; /* ATA_FLAG_xxx */ unsigned int pflags; /* ATA_PFLAG_xxx */ - unsigned int id; /* unique id req'd by scsi midlyr */ - unsigned int port_no; /* unique port #; from zero */ + unsigned int print_id; /* user visible unique port ID */ + unsigned int port_no; /* 0 based port no. inside the host */ struct ata_prd *prd; /* our SG list */ dma_addr_t prd_dma; /* and its DMA mapping */ @@ -759,6 +760,7 @@ extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn, extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, unsigned long interval_msec, unsigned long timeout_msec); +extern unsigned int ata_dev_try_classify(struct ata_port *, unsigned int, u8 *); /* * Default driver ops implementations @@ -786,10 +788,12 @@ extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); +extern void ata_dev_disable(struct ata_device *adev); extern void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); +extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown); extern unsigned long ata_device_blacklisted(const struct ata_device *dev); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); extern void ata_bmdma_start (struct ata_queued_cmd *qc); @@ -890,10 +894,10 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, * printk helpers */ #define ata_port_printk(ap, lv, fmt, args...) \ - printk(lv"ata%u: "fmt, (ap)->id , ##args) + printk(lv"ata%u: "fmt, (ap)->print_id , ##args) #define ata_dev_printk(dev, lv, fmt, args...) \ - printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args) + printk(lv"ata%u.%02u: "fmt, (dev)->ap->print_id, (dev)->devno , ##args) /* * ata_eh_info helpers @@ -1031,6 +1035,21 @@ static inline u8 ata_chk_status(struct ata_port *ap) return ap->ops->check_status(ap); } +/** + * ata_ncq_enabled - Test whether NCQ is enabled + * @dev: ATA device to test for + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * 1 if NCQ is enabled for @dev, 0 otherwise. + */ +static inline int ata_ncq_enabled(struct ata_device *dev) +{ + return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF | + ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ; +} /** * ata_pause - Flush writes and pause 400 nanoseconds. |