diff options
38 files changed, 2393 insertions, 276 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c479d30eeaa..03eb5ed503f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1758,6 +1758,13 @@ and is between 256 and 4096 characters. It is defined in the file Note that genuine overcurrent events won't be reported either. + usbcore.autosuspend= + [USB] The autosuspend time delay (in seconds) used + for newly-detected USB devices (default 2). This + is the time required before an idle device will be + autosuspended. Devices for which the delay is set + to 0 won't be autosuspended at all. + usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. diff --git a/MAINTAINERS b/MAINTAINERS index c268b51e451..a9c13196f6b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3392,6 +3392,13 @@ L: linux-usb-devel@lists.sourceforge.net S: Maintained W: http://www.kroah.com/linux-usb/ +USB DAVICOM DM9601 DRIVER +P: Peter Korsgaard +M: jacmet@sunsite.dk +L: linux-usb-devel@lists.sourceforge.net +W: http://www.linux-usb.org/usbnet +S: Maintained + USB EHCI DRIVER P: David Brownell M: dbrownell@users.sourceforge.net diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 34e9bac319b..b6078706fb9 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -4,7 +4,7 @@ usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \ config.o file.o buffer.o sysfs.o endpoint.o \ - devio.o notify.o generic.o + devio.o notify.o generic.o quirks.o ifeq ($(CONFIG_PCI),y) usbcore-objs += hcd-pci.o diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 2aded261f42..9e3e943f313 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -366,19 +366,8 @@ void usb_driver_release_interface(struct usb_driver *driver, EXPORT_SYMBOL(usb_driver_release_interface); /* returns 0 if no match, 1 if match */ -int usb_match_one_id(struct usb_interface *interface, - const struct usb_device_id *id) +int usb_match_device(struct usb_device *dev, const struct usb_device_id *id) { - struct usb_host_interface *intf; - struct usb_device *dev; - - /* proc_connectinfo in devio.c may call us with id == NULL. */ - if (id == NULL) - return 0; - - intf = interface->cur_altsetting; - dev = interface_to_usbdev(interface); - if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) return 0; @@ -409,6 +398,26 @@ int usb_match_one_id(struct usb_interface *interface, (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) return 0; + return 1; +} + +/* returns 0 if no match, 1 if match */ +int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return 0; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + if (!usb_match_device(dev, id)) + return 0; + /* The interface class, subclass, and protocol should never be * checked for a match if the device class is Vendor Specific, * unless the match record specifies the Vendor ID. */ @@ -954,12 +963,16 @@ static int autosuspend_check(struct usb_device *udev) int i; struct usb_interface *intf; - /* For autosuspend, fail fast if anything is in use. - * Also fail if any interfaces require remote wakeup but it - * isn't available. */ + /* For autosuspend, fail fast if anything is in use or autosuspend + * is disabled. Also fail if any interfaces require remote wakeup + * but it isn't available. + */ udev->do_remote_wakeup = device_may_wakeup(&udev->dev); if (udev->pm_usage_cnt > 0) return -EBUSY; + if (!udev->autosuspend_delay) + return -EPERM; + if (udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; @@ -982,7 +995,7 @@ static int autosuspend_check(struct usb_device *udev) #define autosuspend_check(udev) 0 -#endif +#endif /* CONFIG_USB_SUSPEND */ /** * usb_suspend_both - suspend a USB device and its interfaces @@ -1177,7 +1190,7 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) udev->pm_usage_cnt -= inc_usage_cnt; } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); + udev->autosuspend_delay); usb_pm_unlock(udev); return status; } @@ -1212,6 +1225,26 @@ void usb_autosuspend_device(struct usb_device *udev) } /** + * usb_try_autosuspend_device - attempt an autosuspend of a USB device and its interfaces + * @udev: the usb_device to autosuspend + * + * This routine should be called when a core subsystem thinks @udev may + * be ready to autosuspend. + * + * @udev's usage counter left unchanged. If it or any of the usage counters + * for an active interface is greater than 0, or autosuspend is not allowed + * for any other reason, no autosuspend request will be queued. + * + * This routine can run only in process context. + */ +void usb_try_autosuspend_device(struct usb_device *udev) +{ + usb_autopm_do_device(udev, 0); + // dev_dbg(&udev->dev, "%s: cnt %d\n", + // __FUNCTION__, udev->pm_usage_cnt); +} + +/** * usb_autoresume_device - immediately autoresume a USB device and its interfaces * @udev: the usb_device to autoresume * @@ -1261,7 +1294,7 @@ static int usb_autopm_do_interface(struct usb_interface *intf, intf->pm_usage_cnt -= inc_usage_cnt; } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); + udev->autosuspend_delay); } usb_pm_unlock(udev); return status; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 50c0db15304..41400743ce2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1287,6 +1287,9 @@ int usb_new_device(struct usb_device *udev) if (!try_module_get(THIS_MODULE)) return -EINVAL; + /* Determine quirks */ + usb_detect_quirks(udev); + err = usb_get_configuration(udev); if (err < 0) { dev_err(&udev->dev, "can't read configurations, error %d\n", diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 74edaea5665..2f17468b5c1 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -11,6 +11,7 @@ #include <linux/timer.h> #include <linux/ctype.h> #include <linux/device.h> +#include <linux/usb/quirks.h> #include <asm/byteorder.h> #include <asm/scatterlist.h> @@ -685,7 +686,10 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid, /* Try to read the string descriptor by asking for the maximum * possible number of bytes */ - rc = usb_get_string(dev, langid, index, buf, 255); + if (dev->quirks & USB_QUIRK_STRING_FETCH_255) + rc = -EIO; + else + rc = usb_get_string(dev, langid, index, buf, 255); /* If that failed try to read the descriptor length, then * ask for just that many bytes */ diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c new file mode 100644 index 00000000000..0e5c646cb4f --- /dev/null +++ b/drivers/usb/core/quirks.c @@ -0,0 +1,77 @@ +/* + * USB device quirk handling logic and table + * + * Copyright (c) 2007 Oliver Neukum + * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * + */ + +#include <linux/usb.h> +#include <linux/usb/quirks.h> +#include "usb.h" + +/* List of quirky USB devices. Please keep this list ordered by: + * 1) Vendor ID + * 2) Product ID + * 3) Class ID + * + * as we want specific devices to be overridden first, and only after that, any + * class specific quirks. + * + * Right now the logic aborts if it finds a valid device in the table, we might + * want to change that in the future if it turns out that a whole class of + * devices is broken... + */ +static const struct usb_device_id usb_quirk_list[] = { + /* HP 5300/5370C scanner */ + { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + + /* Elsa MicroLink 56k (V.250) */ + { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + { } /* terminating entry must be last */ +}; + +static void usb_autosuspend_quirk(struct usb_device *udev) +{ +#ifdef CONFIG_USB_SUSPEND + /* disable autosuspend, but allow the user to re-enable it via sysfs */ + udev->autosuspend_delay = 0; +#endif +} + +static const struct usb_device_id *find_id(struct usb_device *udev) +{ + const struct usb_device_id *id = usb_quirk_list; + + for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || + id->driver_info; id++) { + if (usb_match_device(udev, id)) + return id; + } + return NULL; +} + +/* + * Detect any quirks the device has, and do any housekeeping for it if needed. + */ +void usb_detect_quirks(struct usb_device *udev) +{ + const struct usb_device_id *id = usb_quirk_list; + + id = find_id(udev); + if (id) + udev->quirks = (u32)(id->driver_info); + if (udev->quirks) + dev_dbg(&udev->dev, "USB quirks for this device: %x\n", + udev->quirks); + + /* do any special quirk handling here if needed */ + if (udev->quirks & USB_QUIRK_NO_AUTOSUSPEND) + usb_autosuspend_quirk(udev); +} diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 0edfbafd702..311d5df8038 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -148,6 +148,75 @@ show_maxchild(struct device *dev, struct device_attribute *attr, char *buf) } static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL); +static ssize_t +show_quirks(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "0x%x\n", udev->quirks); +} +static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL); + +#ifdef CONFIG_USB_SUSPEND + +static ssize_t +show_autosuspend(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + + return sprintf(buf, "%u\n", udev->autosuspend_delay / HZ); +} + +static ssize_t +set_autosuspend(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + unsigned value, old; + + if (sscanf(buf, "%u", &value) != 1 || value >= INT_MAX/HZ) + return -EINVAL; + value *= HZ; + + old = udev->autosuspend_delay; + udev->autosuspend_delay = value; + if (value > 0 && old == 0) + usb_try_autosuspend_device(udev); + + return count; +} + +static DEVICE_ATTR(autosuspend, S_IRUGO | S_IWUSR, + show_autosuspend, set_autosuspend); + +static char power_group[] = "power"; + +static int add_power_attributes(struct device *dev) +{ + int rc = 0; + + if (is_usb_device(dev)) + rc = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_autosuspend.attr, + power_group); + return rc; +} + +static void remove_power_attributes(struct device *dev) +{ + sysfs_remove_file_from_group(&dev->kobj, + &dev_attr_autosuspend.attr, + power_group); +} + +#else + +#define add_power_attributes(dev) 0 +#define remove_power_attributes(dev) do {} while (0) + +#endif /* CONFIG_USB_SUSPEND */ + /* Descriptor fields */ #define usb_descriptor_attr_le16(field, format_string) \ static ssize_t \ @@ -204,6 +273,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_devnum.attr, &dev_attr_version.attr, &dev_attr_maxchild.attr, + &dev_attr_quirks.attr, NULL, }; static struct attribute_group dev_attr_grp = { @@ -219,6 +289,10 @@ int usb_create_sysfs_dev_files(struct usb_device *udev) if (retval) return retval; + retval = add_power_attributes(dev); + if (retval) + goto error; + if (udev->manufacturer) { retval = device_create_file(dev, &dev_attr_manufacturer); if (retval) @@ -239,10 +313,7 @@ int usb_create_sysfs_dev_files(struct usb_device *udev) goto error; return 0; error: - usb_remove_ep_files(&udev->ep0); - device_remove_file(dev, &dev_attr_manufacturer); - device_remove_file(dev, &dev_attr_product); - device_remove_file(dev, &dev_attr_serial); + usb_remove_sysfs_dev_files(udev); return retval; } @@ -251,14 +322,11 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev) struct device *dev = &udev->dev; usb_remove_ep_files(&udev->ep0); + device_remove_file(dev, &dev_attr_manufacturer); + device_remove_file(dev, &dev_attr_product); + device_remove_file(dev, &dev_attr_serial); + remove_power_attributes(dev); sysfs_remove_group(&dev->kobj, &dev_attr_grp); - - if (udev->manufacturer) - device_remove_file(dev, &dev_attr_manufacturer); - if (udev->product) - device_remove_file(dev, &dev_attr_product); - if (udev->serial) - device_remove_file(dev, &dev_attr_serial); } /* Interface fields */ @@ -362,33 +430,28 @@ static inline void usb_remove_intf_ep_files(struct usb_interface *intf) int usb_create_sysfs_intf_files(struct usb_interface *intf) { + struct device *dev = &intf->dev; struct usb_device *udev = interface_to_usbdev(intf); struct usb_host_interface *alt = intf->cur_altsetting; int retval; - retval = sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); + retval = sysfs_create_group(&dev->kobj, &intf_attr_grp); if (retval) - goto error; + return retval; if (alt->string == NULL) alt->string = usb_cache_string(udev, alt->desc.iInterface); if (alt->string) - retval = device_create_file(&intf->dev, &dev_attr_interface); + retval = device_create_file(dev, &dev_attr_interface); usb_create_intf_ep_files(intf, udev); return 0; -error: - if (alt->string) - device_remove_file(&intf->dev, &dev_attr_interface); - sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp); - usb_remove_intf_ep_files(intf); - return retval; } void usb_remove_sysfs_intf_files(struct usb_interface *intf) { - usb_remove_intf_ep_files(intf); - sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp); + struct device *dev = &intf->dev; - if (intf->cur_altsetting->string) - device_remove_file(&intf->dev, &dev_attr_interface); + usb_remove_intf_ep_files(intf); + device_remove_file(dev, &dev_attr_interface); + sysfs_remove_group(&dev->kobj, &intf_attr_grp); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 3db721cd557..54b42ce311c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -22,6 +22,7 @@ */ #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/string.h> #include <linux/bitops.h> #include <linux/slab.h> @@ -50,6 +51,16 @@ static int nousb; /* Disable USB when built into kernel image */ struct workqueue_struct *ksuspend_usb_wq; /* For autosuspend */ +#ifdef CONFIG_USB_SUSPEND +static int usb_autosuspend_delay = 2; /* Default delay value, + * in seconds */ +module_param_named(autosuspend, usb_autosuspend_delay, uint, 0644); +MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); + +#else +#define usb_autosuspend_delay 0 +#endif + /** * usb_ifnum_to_if - get the interface object with a given interface number @@ -306,6 +317,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) #ifdef CONFIG_PM mutex_init(&dev->pm_mutex); INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work); + dev->autosuspend_delay = usb_autosuspend_delay * HZ; #endif return dev; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 17830a81be1..08b5a04e375 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -13,6 +13,7 @@ extern void usb_disable_interface (struct usb_device *dev, struct usb_interface *intf); extern void usb_release_interface_cache(struct kref *ref); extern void usb_disable_device (struct usb_device *dev, int skip_ep0); +extern void usb_detect_quirks(struct usb_device *udev); extern int usb_get_device_descriptor(struct usb_device *dev, unsigned int size); @@ -21,6 +22,8 @@ extern int usb_set_configuration(struct usb_device *dev, int configuration); extern void usb_kick_khubd(struct usb_device *dev); extern void usb_resume_root_hub(struct usb_device *dev); +extern int usb_match_device(struct usb_device *dev, + const struct usb_device_id *id); extern int usb_hub_init(void); extern void usb_hub_cleanup(void); @@ -62,14 +65,14 @@ static inline void usb_pm_unlock(struct usb_device *udev) {} #ifdef CONFIG_USB_SUSPEND -#define USB_AUTOSUSPEND_DELAY (HZ*2) - extern void usb_autosuspend_device(struct usb_device *udev); +extern void usb_try_autosuspend_device(struct usb_device *udev); extern int usb_autoresume_device(struct usb_device *udev); #else -#define usb_autosuspend_device(udev) do {} while (0) +#define usb_autosuspend_device(udev) do {} while (0) +#define usb_try_autosuspend_device(udev) do {} while (0) static inline int usb_autoresume_device(struct usb_device *udev) { return 0; diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 34296e79edc..188c74a9521 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -553,6 +553,7 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb) { struct kiocb_priv *priv = iocb->private; ssize_t len, total; + void *to_copy; int i; /* we "retry" to get the right mm context for this: */ @@ -560,10 +561,11 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb) /* copy stuff into user buffers */ total = priv->actual; len = 0; + to_copy = priv->buf; for (i=0; i < priv->nr_segs; i++) { ssize_t this = min((ssize_t)(priv->iv[i].iov_len), total); - if (copy_to_user(priv->iv[i].iov_base, priv->buf, this)) { + if (copy_to_user(priv->iv[i].iov_base, to_copy, this)) { if (len == 0) len = -EFAULT; break; @@ -571,6 +573,7 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb) total -= this; len += this; + to_copy += this; if (total == 0) break; } diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 5d6c06bc452..8d24d3dc0a6 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -196,7 +196,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) struct uhci_td *td = list_entry(urbp->td_list.next, struct uhci_td, list); - if (cpu_to_le32(td->dma_handle) != (element & ~UHCI_PTR_BITS)) + if (element != LINK_TO_TD(td)) out += sprintf(out, "%*s Element != First TD\n", space, ""); i = nurbs = 0; @@ -220,16 +220,6 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) return out - buf; } -static const char * const qh_names[] = { - "skel_unlink_qh", "skel_iso_qh", - "skel_int128_qh", "skel_int64_qh", - "skel_int32_qh", "skel_int16_qh", - "skel_int8_qh", "skel_int4_qh", - "skel_int2_qh", "skel_int1_qh", - "skel_ls_control_qh", "skel_fs_control_qh", - "skel_bulk_qh", "skel_term_qh" -}; - static int uhci_show_sc(int port, unsigned short status, char *buf, int len) { char *out = buf; @@ -352,6 +342,12 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) struct uhci_td *td; struct list_head *tmp, *head; int nframes, nerrs; + __le32 link; + + static const char * const qh_names[] = { + "unlink", "iso", "int128", "int64", "int32", "int16", + "int8", "int4", "int2", "async", "term" + }; out += uhci_show_root_hub_state(uhci, out, len - (out - buf)); out += sprintf(out, "HC status\n"); @@ -374,7 +370,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) nframes = 10; nerrs = 0; for (i = 0; i < UHCI_NUMFRAMES; ++i) { - __le32 link, qh_dma; + __le32 qh_dma; j = 0; td = uhci->frame_cpu[i]; @@ -393,7 +389,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) do { td = list_entry(tmp, struct uhci_td, fl_list); tmp = tmp->next; - if (cpu_to_le32(td->dma_handle) != link) { + if (link != LINK_TO_TD(td)) { if (nframes > 0) out += sprintf(out, " link does " "not match list entry!\n"); @@ -430,23 +426,21 @@ check_link: for (i = 0; i < UHCI_NUM_SKELQH; ++i) { int cnt = 0; + __le32 fsbr_link = 0; qh = uhci->skelqh[i]; - out += sprintf(out, "- %s\n", qh_names[i]); \ + out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \ out += uhci_show_qh(qh, out, len - (out - buf), 4); /* Last QH is the Terminating QH, it's different */ - if (i == UHCI_NUM_SKELQH - 1) { - if (qh->link != UHCI_PTR_TERM) - out += sprintf(out, " bandwidth reclamation on!\n"); - - if (qh_element(qh) != cpu_to_le32(uhci->term_td->dma_handle)) + if (i == SKEL_TERM) { + if (qh_element(qh) != LINK_TO_TD(uhci->term_td)) out += sprintf(out, " skel_term_qh element is not set to term_td!\n"); - + if (link == LINK_TO_QH(uhci->skel_term_qh)) + goto check_qh_link; continue; } - j = (i < 9) ? 9 : i+1; /* Next skeleton */ head = &qh->node; tmp = head->next; @@ -456,15 +450,26 @@ check_link: if (++cnt <= 10) out += uhci_show_qh(qh, out, len - (out - buf), 4); + if (!fsbr_link && qh->skel >= SKEL_FSBR) + fsbr_link = LINK_TO_QH(qh); } if ((cnt -= 10) > 0) out += sprintf(out, " Skipped %d QHs\n", cnt); - if (i > 1 && i < UHCI_NUM_SKELQH - 1) { - if (qh->link != - (cpu_to_le32(uhci->skelqh[j]->dma_handle) | UHCI_PTR_QH)) - out += sprintf(out, " last QH not linked to next skeleton!\n"); - } + link = UHCI_PTR_TERM; + if (i <= SKEL_ISO) + ; + else if (i < SKEL_ASYNC) + link = LINK_TO_QH(uhci->skel_async_qh); + else if (!uhci->fsbr_is_on) + ; + else if (fsbr_link) + link = fsbr_link; + else + link = LINK_TO_QH(uhci->skel_term_qh); +check_qh_link: + if (qh->link != link) + out += sprintf(out, " last QH not linked to next skeleton!\n"); } return out - buf; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index ded4df30a63..44da4334f1d 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -13,7 +13,7 @@ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) - * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu * * Intel documents this fairly well, and as far as I know there * are no royalties or anything like that, but even so there are @@ -107,16 +107,16 @@ static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame) * interrupt QHs, which will help spread out bandwidth utilization. * * ffs (Find First bit Set) does exactly what we need: - * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8], - * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc. + * 1,3,5,... => ffs = 0 => use period-2 QH = skelqh[8], + * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc. * ffs >= 7 => not on any high-period queue, so use - * skel_int1_qh = skelqh[9]. + * period-1 QH = skelqh[9]. * Add in UHCI_NUMFRAMES to insure at least one bit is set. */ skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES); if (skelnum <= 1) skelnum = 9; - return UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[skelnum]->dma_handle); + return LINK_TO_QH(uhci->skelqh[skelnum]); } #include "uhci-debug.c" @@ -540,16 +540,18 @@ static void uhci_shutdown(struct pci_dev *pdev) * * The hardware doesn't really know any difference * in the queues, but the order does matter for the - * protocols higher up. The order is: + * protocols higher up. The order in which the queues + * are encountered by the hardware is: * - * - any isochronous events handled before any + * - All isochronous events are handled before any * of the queues. We don't do that here, because * we'll create the actual TD entries on demand. - * - The first queue is the interrupt queue. - * - The second queue is the control queue, split into low- and full-speed - * - The third queue is bulk queue. - * - The fourth queue is the bandwidth reclamation queue, which loops back - * to the full-speed control queue. + * - The first queue is the high-period interrupt queue. + * - The second queue is the period-1 interrupt and async + * (low-speed control, full-speed control, then bulk) queue. + * - The third queue is the terminating bandwidth reclamation queue, + * which contains no members, loops back to itself, and is present + * only when FSBR is on and there are no full-speed control or bulk QHs. */ static int uhci_start(struct usb_hcd *hcd) { @@ -626,34 +628,18 @@ static int uhci_start(struct usb_hcd *hcd) } /* - * 8 Interrupt queues; link all higher int queues to int1, - * then link int1 to control and control to bulk + * 8 Interrupt queues; link all higher int queues to int1 = async */ - uhci->skel_int128_qh->link = - uhci->skel_int64_qh->link = - uhci->skel_int32_qh->link = - uhci->skel_int16_qh->link = - uhci->skel_int8_qh->link = - uhci->skel_int4_qh->link = - uhci->skel_int2_qh->link = UHCI_PTR_QH | - cpu_to_le32(uhci->skel_int1_qh->dma_handle); - - uhci->skel_int1_qh->link = UHCI_PTR_QH | - cpu_to_le32(uhci->skel_ls_control_qh->dma_handle); - uhci->skel_ls_control_qh->link = UHCI_PTR_QH | - cpu_to_le32(uhci->skel_fs_control_qh->dma_handle); - uhci->skel_fs_control_qh->link = UHCI_PTR_QH | - cpu_to_le32(uhci->skel_bulk_qh->dma_handle); - uhci->skel_bulk_qh->link = UHCI_PTR_QH | - cpu_to_le32(uhci->skel_term_qh->dma_handle); + for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i) + uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh); + uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM; /* This dummy TD is to work around a bug in Intel PIIX controllers */ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) | - (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); - uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle); - - uhci->skel_term_qh->link = UHCI_PTR_TERM; - uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle); + (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); + uhci->term_td->link = UHCI_PTR_TERM; + uhci->skel_async_qh->element = uhci->skel_term_qh->element = + LINK_TO_TD(uhci->term_td); /* * Fill the frame list: make all entries point to the proper diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 74469b5bcb6..1b3d23406ac 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -129,11 +129,12 @@ struct uhci_qh { __le32 element; /* Queue element (TD) pointer */ /* Software fields */ + dma_addr_t dma_handle; + struct list_head node; /* Node in the list of QHs */ struct usb_host_endpoint *hep; /* Endpoint information */ struct usb_device *udev; struct list_head queue; /* Queue of urbps for this QH */ - struct uhci_qh *skel; /* Skeleton for this QH */ struct uhci_td *dummy_td; /* Dummy TD to end the queue */ struct uhci_td *post_td; /* Last TD completed */ @@ -149,8 +150,7 @@ struct uhci_qh { int state; /* QH_STATE_xxx; see above */ int type; /* Queue type (control, bulk, etc) */ - - dma_addr_t dma_handle; + int skel; /* Skeleton queue number */ unsigned int initial_toggle:1; /* Endpoint's current toggle value */ unsigned int needs_fixup:1; /* Must fix the TD toggle values */ @@ -171,6 +171,8 @@ static inline __le32 qh_element(struct uhci_qh *qh) { return element; } +#define LINK_TO_QH(qh) (UHCI_PTR_QH | cpu_to_le32((qh)->dma_handle)) + /* * Transfer Descriptors @@ -264,6 +266,8 @@ static inline u32 td_status(struct uhci_td *td) { return le32_to_cpu(status); } +#define LINK_TO_TD(td) (cpu_to_le32((td)->dma_handle)) + /* * Skeleton Queue Headers @@ -272,12 +276,13 @@ static inline u32 td_status(struct uhci_td *td) { /* * The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for * automatic queuing. To make it easy to insert entries into the schedule, - * we have a skeleton of QHs for each predefined Interrupt latency, - * low-speed control, full-speed control, bulk, and terminating QH - * (see explanation for the terminating QH below). + * we have a skeleton of QHs for each predefined Interrupt latency. + * Asynchronous QHs (low-speed control, full-speed control, and bulk) + * go onto the period-1 interrupt list, since they all get accessed on + * every frame. * - * When we want to add a new QH, we add it to the end of the list for the - * skeleton QH. For instance, the schedule list can look like this: + * When we want to add a new QH, we add it to the list starting from the + * appropriate skeleton QH. For instance, the schedule can look like this: * * skel int128 QH * dev 1 interrupt QH @@ -285,50 +290,47 @@ static inline u32 td_status(struct uhci_td *td) { * skel int64 QH * skel int32 QH * ... - * skel int1 QH - * skel low-speed control QH - * dev 5 control QH - * skel full-speed control QH - * skel bulk QH + * skel int1 + async QH + * dev 5 low-speed control QH * dev 1 bulk QH * dev 2 bulk QH - * skel terminating QH * - * The terminating QH is used for 2 reasons: - * - To place a terminating TD which is used to workaround a PIIX bug - * (see Intel errata for explanation), and - * - To loop back to the full-speed control queue for full-speed bandwidth - * reclamation. + * There is a special terminating QH used to keep full-speed bandwidth + * reclamation active when no full-speed control or bulk QHs are linked + * into the schedule. It has an inactive TD (to work around a PIIX bug, + * see the Intel errata) and it points back to itself. * - * There's a special skeleton QH for Isochronous QHs. It never appears - * on the schedule, and Isochronous TDs go on the schedule before the + * There's a special skeleton QH for Isochronous QHs which never appears + * on the schedule. Isochronous TDs go on the schedule before the * the skeleton QHs. The hardware accesses them directly rather than * through their QH, which is used only for bookkeeping purposes. * While the UHCI spec doesn't forbid the use of QHs for Isochronous, * it doesn't use them either. And the spec says that queues never * advance on an error completion status, which makes them totally * unsuitable for Isochronous transfers. + * + * There's also a special skeleton QH used for QHs which are in the process + * of unlinking and so may still be in use by the hardware. It too never + * appears on the schedule. */ -#define UHCI_NUM_SKELQH 14 -#define skel_unlink_qh skelqh[0] -#define skel_iso_qh skelqh[1] -#define skel_int128_qh skelqh[2] -#define skel_int64_qh skelqh[3] -#define skel_int32_qh skelqh[4] -#define skel_int16_qh skelqh[5] -#define skel_int8_qh skelqh[6] -#define skel_int4_qh skelqh[7] -#define skel_int2_qh skelqh[8] -#define skel_int1_qh skelqh[9] -#define skel_ls_control_qh skelqh[10] -#define skel_fs_control_qh skelqh[11] -#define skel_bulk_qh skelqh[12] -#define skel_term_qh skelqh[13] - -/* Find the skelqh entry corresponding to an interval exponent */ -#define UHCI_SKEL_INDEX(exponent) (9 - exponent) - +#define UHCI_NUM_SKELQH 11 +#define SKEL_UNLINK 0 +#define skel_unlink_qh skelqh[SKEL_UNLINK] +#define SKEL_ISO 1 +#define skel_iso_qh skelqh[SKEL_ISO] + /* int128, int64, ..., int1 = 2, 3, ..., 9 */ +#define SKEL_INDEX(exponent) (9 - exponent) +#define SKEL_ASYNC 9 +#define skel_async_qh skelqh[SKEL_ASYNC] +#define SKEL_TERM 10 +#define skel_term_qh skelqh[SKEL_TERM] + +/* The following entries refer to sublists of skel_async_qh */ +#define SKEL_LS_CONTROL 20 +#define SKEL_FS_CONTROL 21 +#define SKEL_FSBR SKEL_FS_CONTROL +#define SKEL_BULK 22 /* * The UHCI controller and root hub diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 68e66b33e72..f4ebdb3e488 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -13,7 +13,7 @@ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) - * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu */ @@ -45,15 +45,43 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci) */ static void uhci_fsbr_on(struct uhci_hcd *uhci) { + struct uhci_qh *fsbr_qh, *lqh, *tqh; + uhci->fsbr_is_on = 1; - uhci->skel_term_qh->link = cpu_to_le32( - uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH; + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* Find the first FSBR QH. Linear search through the list is + * acceptable because normally FSBR gets turned on as soon as + * one QH needs it. */ + fsbr_qh = NULL; + list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) { + if (tqh->skel < SKEL_FSBR) + break; + fsbr_qh = tqh; + } + + /* No FSBR QH means we must insert the terminating skeleton QH */ + if (!fsbr_qh) { + uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh); + wmb(); + lqh->link = uhci->skel_term_qh->link; + + /* Otherwise loop the last QH to the first FSBR QH */ + } else + lqh->link = LINK_TO_QH(fsbr_qh); } static void uhci_fsbr_off(struct uhci_hcd *uhci) { + struct uhci_qh *lqh; + uhci->fsbr_is_on = 0; - uhci->skel_term_qh->link = UHCI_PTR_TERM; + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* End the async list normally and unlink the terminating QH */ + lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM; } static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb) @@ -158,11 +186,11 @@ static inline void uhci_insert_td_in_frame_list(struct uhci_hcd *uhci, td->link = ltd->link; wmb(); - ltd->link = cpu_to_le32(td->dma_handle); + ltd->link = LINK_TO_TD(td); } else { td->link = uhci->frame[framenum]; wmb(); - uhci->frame[framenum] = cpu_to_le32(td->dma_handle); + uhci->frame[framenum] = LINK_TO_TD(td); uhci->frame_cpu[framenum] = td; } } @@ -184,7 +212,7 @@ static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci, struct uhci_td *ntd; ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list); - uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle); + uhci->frame[td->frame] = LINK_TO_TD(ntd); uhci->frame_cpu[td->frame] = ntd; } } else { @@ -405,12 +433,81 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first) } /* - * Put a QH on the schedule in both hardware and software + * Link an Isochronous QH into its skeleton's list */ -static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) +static inline void link_iso(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + list_add_tail(&qh->node, &uhci->skel_iso_qh->node); + + /* Isochronous QHs aren't linked by the hardware */ +} + +/* + * Link a high-period interrupt QH into the schedule at the end of its + * skeleton's list + */ +static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) { struct uhci_qh *pqh; + list_add_tail(&qh->node, &uhci->skelqh[qh->skel]->node); + + pqh = list_entry(qh->node.prev, struct uhci_qh, node); + qh->link = pqh->link; + wmb(); + pqh->link = LINK_TO_QH(qh); +} + +/* + * Link a period-1 interrupt or async QH into the schedule at the + * correct spot in the async skeleton's list, and update the FSBR link + */ +static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + struct uhci_qh *pqh, *lqh; + __le32 link_to_new_qh; + __le32 *extra_link = &link_to_new_qh; + + /* Find the predecessor QH for our new one and insert it in the list. + * The list of QHs is expected to be short, so linear search won't + * take too long. */ + list_for_each_entry_reverse(pqh, &uhci->skel_async_qh->node, node) { + if (pqh->skel <= qh->skel) + break; + } + list_add(&qh->node, &pqh->node); + qh->link = pqh->link; + + link_to_new_qh = LINK_TO_QH(qh); + + /* If this is now the first FSBR QH, take special action */ + if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR && + qh->skel >= SKEL_FSBR) { + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* If the new QH is also the last one, we must unlink + * the terminating skeleton QH and make the new QH point + * back to itself. */ + if (qh == lqh) { + qh->link = link_to_new_qh; + extra_link = &uhci->skel_term_qh->link; + + /* Otherwise the last QH must point to the new QH */ + } else + extra_link = &lqh->link; + } + + /* Link it into the schedule */ + wmb(); + *extra_link = pqh->link = link_to_new_qh; +} + +/* + * Put a QH on the schedule in both hardware and software + */ +static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ WARN_ON(list_empty(&qh->queue)); /* Set the element pointer if it isn't set already. @@ -421,7 +518,7 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) struct uhci_td *td = list_entry(urbp->td_list.next, struct uhci_td, list); - qh->element = cpu_to_le32(td->dma_handle); + qh->element = LINK_TO_TD(td); } /* Treat the queue as if it has just advanced */ @@ -432,18 +529,64 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) return; qh->state = QH_STATE_ACTIVE; - /* Move the QH from its old list to the end of the appropriate + /* Move the QH from its old list to the correct spot in the appropriate * skeleton's list */ if (qh == uhci->next_qh) uhci->next_qh = list_entry(qh->node.next, struct uhci_qh, node); - list_move_tail(&qh->node, &qh->skel->node); + list_del(&qh->node); + + if (qh->skel == SKEL_ISO) + link_iso(uhci, qh); + else if (qh->skel < SKEL_ASYNC) + link_interrupt(uhci, qh); + else + link_async(uhci, qh); +} + +/* + * Unlink a high-period interrupt QH from the schedule + */ +static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + struct uhci_qh *pqh; - /* Link it into the schedule */ pqh = list_entry(qh->node.prev, struct uhci_qh, node); - qh->link = pqh->link; - wmb(); - pqh->link = UHCI_PTR_QH | cpu_to_le32(qh->dma_handle); + pqh->link = qh->link; + mb(); +} + +/* + * Unlink a period-1 interrupt or async QH from the schedule + */ +static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + struct uhci_qh *pqh, *lqh; + __le32 link_to_next_qh = qh->link; + + pqh = list_entry(qh->node.prev, struct uhci_qh, node); + + /* If this is the first FSBQ QH, take special action */ + if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR && + qh->skel >= SKEL_FSBR) { + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* If this QH is also the last one, we must link in + * the terminating skeleton QH. */ + if (qh == lqh) { + link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh); + uhci->skel_term_qh->link = link_to_next_qh; + wmb(); + qh->link = link_to_next_qh; + + /* Otherwise the last QH must point to the new first FSBR QH */ + } else + lqh->link = link_to_next_qh; + } + + pqh->link = link_to_next_qh; + mb(); } /* @@ -451,17 +594,18 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) */ static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) { - struct uhci_qh *pqh; - if (qh->state == QH_STATE_UNLINKING) return; WARN_ON(qh->state != QH_STATE_ACTIVE || !qh->udev); qh->state = QH_STATE_UNLINKING; /* Unlink the QH from the schedule and record when we did it */ - pqh = list_entry(qh->node.prev, struct uhci_qh, node); - pqh->link = qh->link; - mb(); + if (qh->skel == SKEL_ISO) + ; + else if (qh->skel < SKEL_ASYNC) + unlink_interrupt(uhci, qh); + else + unlink_async(uhci, qh); uhci_get_current_frame_number(uhci); qh->unlink_frame = uhci->frame_number; @@ -697,6 +841,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, dma_addr_t data = urb->transfer_dma; __le32 *plink; struct urb_priv *urbp = urb->hcpriv; + int skel; /* The "pipe" thing contains the destination in bits 8--18 */ destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; @@ -737,7 +882,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, td = uhci_alloc_td(uhci); if (!td) goto nomem; - *plink = cpu_to_le32(td->dma_handle); + *plink = LINK_TO_TD(td); /* Alternate Data0/1 (start with Data1) */ destination ^= TD_TOKEN_TOGGLE; @@ -757,7 +902,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, td = uhci_alloc_td(uhci); if (!td) goto nomem; - *plink = cpu_to_le32(td->dma_handle); + *plink = LINK_TO_TD(td); /* * It's IN if the pipe is an output pipe or we're not expecting @@ -784,7 +929,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, td = uhci_alloc_td(uhci); if (!td) goto nomem; - *plink = cpu_to_le32(td->dma_handle); + *plink = LINK_TO_TD(td); uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0); wmb(); @@ -797,11 +942,13 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, * isn't in the CONFIGURED state. */ if (urb->dev->speed == USB_SPEED_LOW || urb->dev->state != USB_STATE_CONFIGURED) - qh->skel = uhci->skel_ls_control_qh; + skel = SKEL_LS_CONTROL; else { - qh->skel = uhci->skel_fs_control_qh; + skel = SKEL_FS_CONTROL; uhci_add_fsbr(uhci, urb); } + if (qh->state != QH_STATE_ACTIVE) + qh->skel = skel; urb->actual_length = -8; /* Account for the SETUP packet */ return 0; @@ -860,7 +1007,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, td = uhci_alloc_td(uhci); if (!td) goto nomem; - *plink = cpu_to_le32(td->dma_handle); + *plink = LINK_TO_TD(td); } uhci_add_td_to_urbp(td, urbp); uhci_fill_td(td, status, @@ -888,7 +1035,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, td = uhci_alloc_td(uhci); if (!td) goto nomem; - *plink = cpu_to_le32(td->dma_handle); + *plink = LINK_TO_TD(td); uhci_add_td_to_urbp(td, urbp); uhci_fill_td(td, status, @@ -914,7 +1061,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, td = uhci_alloc_td(uhci); if (!td) goto nomem; - *plink = cpu_to_le32(td->dma_handle); + *plink = LINK_TO_TD(td); uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0); wmb(); @@ -931,7 +1078,7 @@ nomem: return -ENOMEM; } -static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, +static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct uhci_qh *qh) { int ret; @@ -940,7 +1087,8 @@ static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, if (urb->dev->speed == USB_SPEED_LOW) return -EINVAL; - qh->skel = uhci->skel_bulk_qh; + if (qh->state != QH_STATE_ACTIVE) + qh->skel = SKEL_BULK; ret = uhci_submit_common(uhci, urb, qh); if (ret == 0) uhci_add_fsbr(uhci, urb); @@ -968,7 +1116,7 @@ static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, if (exponent < 0) return -EINVAL; qh->period = 1 << exponent; - qh->skel = uhci->skelqh[UHCI_SKEL_INDEX(exponent)]; + qh->skel = SKEL_INDEX(exponent); /* For now, interrupt phase is fixed by the layout * of the QH lists. */ @@ -1005,7 +1153,7 @@ static int uhci_fixup_short_transfer(struct uhci_hcd *uhci, * the queue at the status stage transaction, which is * the last TD. */ WARN_ON(list_empty(&urbp->td_list)); - qh->element = cpu_to_le32(td->dma_handle); + qh->element = LINK_TO_TD(td); tmp = td->list.prev; ret = -EINPROGRESS; @@ -1216,7 +1364,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, qh->iso_status = 0; } - qh->skel = uhci->skel_iso_qh; + qh->skel = SKEL_ISO; if (!qh->bandwidth_reserved) uhci_reserve_bandwidth(uhci, qh); return 0; @@ -1566,8 +1714,7 @@ static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh) if (time_after(jiffies, qh->advance_jiffies + QH_WAIT_TIMEOUT)) { /* Detect the Intel bug and work around it */ - if (qh->post_td && qh_element(qh) == - cpu_to_le32(qh->post_td->dma_handle)) { + if (qh->post_td && qh_element(qh) == LINK_TO_TD(qh->post_td)) { qh->element = qh->post_td->link; qh->advance_jiffies = jiffies; ret = 1; diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 8505824848f..3749f4a235f 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -31,6 +31,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/usb/input.h> +#include <linux/hid.h> /* * Version Information @@ -330,7 +331,8 @@ static void usb_kbd_disconnect(struct usb_interface *intf) } static struct usb_device_id usb_kbd_id_table [] = { - { USB_INTERFACE_INFO(3, 1, 1) }, + { USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT, + USB_INTERFACE_PROTOCOL_KEYBOARD) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 64a33e420cf..692fd608777 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -31,6 +31,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/usb/input.h> +#include <linux/hid.h> /* * Version Information @@ -213,7 +214,8 @@ static void usb_mouse_disconnect(struct usb_interface *intf) } static struct usb_device_id usb_mouse_id_table [] = { - { USB_INTERFACE_INFO(3, 1, 2) }, + { USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT, + USB_INTERFACE_PROTOCOL_MOUSE) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c index 4142e36730f..4f3e9bc7177 100644 --- a/drivers/usb/input/wacom_wac.c +++ b/drivers/usb/input/wacom_wac.c @@ -163,7 +163,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) } id = STYLUS_DEVICE_ID; - if (data[1] & 0x10) { /* in prox */ + if (data[1] & 0x80) { /* in prox */ switch ((data[1] >> 5) & 3) { @@ -196,9 +196,6 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f); break; } - } - - if (data[1] & 0x90) { x = wacom_le16_to_cpu(&data[2]); y = wacom_le16_to_cpu(&data[4]); wacom_report_abs(wcombo, ABS_X, x); @@ -210,19 +207,28 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); } wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ - } - else - wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ - - if (data[1] & 0x10) /* only report prox-in when in area */ wacom_report_key(wcombo, wacom->tool[0], 1); - if (!(data[1] & 0x90)) /* report prox-out when physically out */ + } else if (!(data[1] & 0x90)) { + wacom_report_abs(wcombo, ABS_X, 0); + wacom_report_abs(wcombo, ABS_Y, 0); + if (wacom->tool[0] == BTN_TOOL_MOUSE) { + wacom_report_key(wcombo, BTN_LEFT, 0); + wacom_report_key(wcombo, BTN_RIGHT, 0); + wacom_report_abs(wcombo, ABS_DISTANCE, 0); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + } + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ wacom_report_key(wcombo, wacom->tool[0], 0); - wacom_input_sync(wcombo); + } /* send pad data */ if (wacom->features->type == WACOM_G4) { - if ( (wacom->serial[1] & 0xc0) != (data[7] & 0xf8) ) { + if (data[7] & 0xf8) { + wacom_input_sync(wcombo); /* sync last event */ wacom->id[1] = 1; wacom->serial[1] = (data[7] & 0xf8); wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); @@ -230,10 +236,15 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); wacom_report_rel(wcombo, REL_WHEEL, rw); wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); + wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); } else if (wacom->id[1]) { + wacom_input_sync(wcombo); /* sync last event */ wacom->id[1] = 0; + wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); + wacom_report_abs(wcombo, ABS_MISC, 0); wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); } } @@ -304,28 +315,35 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) default: /* Unknown tool */ wacom->tool[idx] = BTN_TOOL_PEN; } - /* only large I3 support Lens Cursor */ - if(!((wacom->tool[idx] == BTN_TOOL_LENS) - && ((wacom->features->type == INTUOS3) - || (wacom->features->type == INTUOS3S)))) { - wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */ - wacom_report_key(wcombo, wacom->tool[idx], 1); - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - return 2; - } return 1; } /* Exit report */ if ((data[1] & 0xfe) == 0x80) { - if(!((wacom->tool[idx] == BTN_TOOL_LENS) - && ((wacom->features->type == INTUOS3) - || (wacom->features->type == INTUOS3S)))) { - wacom_report_key(wcombo, wacom->tool[idx], 0); - wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - return 2; + wacom_report_abs(wcombo, ABS_X, 0); + wacom_report_abs(wcombo, ABS_Y, 0); + wacom_report_abs(wcombo, ABS_DISTANCE, 0); + if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { + wacom_report_key(wcombo, BTN_LEFT, 0); + wacom_report_key(wcombo, BTN_MIDDLE, 0); + wacom_report_key(wcombo, BTN_RIGHT, 0); + wacom_report_key(wcombo, BTN_SIDE, 0); + wacom_report_key(wcombo, BTN_EXTRA, 0); + wacom_report_abs(wcombo, ABS_THROTTLE, 0); + wacom_report_abs(wcombo, ABS_RZ, 0); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_abs(wcombo, ABS_TILT_X, 0); + wacom_report_abs(wcombo, ABS_TILT_Y, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + wacom_report_abs(wcombo, ABS_WHEEL, 0); } + wacom_report_key(wcombo, wacom->tool[idx], 0); + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 2; } return 0; } @@ -394,6 +412,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, wacom->tool[1], 1); else wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff); return 1; } @@ -403,6 +422,12 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) if (result) return result-1; + /* Only large I3 and I1 & I2 support Lense Cursor */ + if((wacom->tool[idx] == BTN_TOOL_LENS) + && ((wacom->features->type == INTUOS3) + || (wacom->features->type == INTUOS3S))) + return 0; + /* Cintiq doesn't send data when RDY bit isn't set */ if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) return 0; @@ -554,11 +579,11 @@ static struct wacom_features wacom_features[] = { { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, - { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS }, - { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, - { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS }, - { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 63, INTUOS }, - { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 63, INTUOS }, + { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, + { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, + { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, + { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 31, INTUOS }, + { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 31, INTUOS }, { "Wacom PL400", 8, 5408, 4056, 255, 0, PL }, { "Wacom PL500", 8, 6144, 4608, 255, 0, PL }, { "Wacom PL600", 8, 6126, 4604, 255, 0, PL }, @@ -571,11 +596,11 @@ static struct wacom_features wacom_features[] = { { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, - { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 63, INTUOS }, - { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, - { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 63, INTUOS }, - { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 63, INTUOS }, - { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 63, INTUOS }, + { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, + { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, + { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, + { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS }, + { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS }, { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 63, INTUOS3S }, { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 63, INTUOS3 }, { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 63, INTUOS3 }, @@ -584,7 +609,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 }, { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, - { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, + { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { } }; diff --git a/drivers/usb/input/wacom_wac.h b/drivers/usb/input/wacom_wac.h index a1d9ce00797..a2302228724 100644 --- a/drivers/usb/input/wacom_wac.h +++ b/drivers/usb/input/wacom_wac.h @@ -12,6 +12,7 @@ #define STYLUS_DEVICE_ID 0x02 #define CURSOR_DEVICE_ID 0x06 #define ERASER_DEVICE_ID 0x0A +#define PAD_DEVICE_ID 0x0F enum { PENPARTNER = 0, diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 4907e8b8007..9c7eb6144d0 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -244,6 +244,20 @@ config USB_TRANCEVIBRATOR To compile this driver as a module, choose M here: the module will be called trancevibrator. +config USB_IOWARRIOR + tristate "IO Warrior driver support" + depends on USB + help + Say Y here if you want to support the IO Warrior devices from Code + Mercenaries. This includes support for the following devices: + IO Warrior 40 + IO Warrior 24 + IO Warrior 56 + IO Warrior 24 Power Vampire + + To compile this driver as a module, choose M here: the + module will be called iowarrior. + config USB_TEST tristate "USB testing driver (DEVELOPMENT)" depends on USB && USB_DEVICEFS && EXPERIMENTAL diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index dac2d5b7156..b68e6b774f1 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o +obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LED) += usbled.o diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c new file mode 100644 index 00000000000..d69665c8de0 --- /dev/null +++ b/drivers/usb/misc/iowarrior.c @@ -0,0 +1,925 @@ +/* + * Native support for the I/O-Warrior USB devices + * + * Copyright (c) 2003-2005 Code Mercenaries GmbH + * written by Christian Lucht <lucht@codemercs.com> + * + * based on + + * usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com> + * brlvger.c by Stephane Dalton <sdalton@videotron.ca> + * and St�hane Doyon <s.doyon@videotron.ca> + * + * Released under the GPLv2. + */ + +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/poll.h> +#include <linux/version.h> +#include <linux/usb/iowarrior.h> + +/* Version Information */ +#define DRIVER_VERSION "v0.4.0" +#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>" +#define DRIVER_DESC "USB IO-Warrior driver (Linux 2.6.x)" + +#define USB_VENDOR_ID_CODEMERCS 1984 +/* low speed iowarrior */ +#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500 +#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501 +#define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511 +#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512 +/* full speed iowarrior */ +#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503 + +/* Get a minor range for your devices from the usb maintainer */ +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define IOWARRIOR_MINOR_BASE 0 +#else +#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not offical yet +#endif + +/* interrupt input queue size */ +#define MAX_INTERRUPT_BUFFER 16 +/* + maximum number of urbs that are submitted for writes at the same time, + this applies to the IOWarrior56 only! + IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls. +*/ +#define MAX_WRITES_IN_FLIGHT 4 + +/* Use our own dbg macro */ +#undef dbg +#define dbg( format, arg... ) do { if( debug ) printk( KERN_DEBUG __FILE__ ": " format "\n" , ## arg ); } while ( 0 ) + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* Module parameters */ +static int debug = 0; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); + +static struct usb_driver iowarrior_driver; + +/*--------------*/ +/* data */ +/*--------------*/ + +/* Structure to hold all of our device specific stuff */ +struct iowarrior { + struct mutex mutex; /* locks this structure */ + struct usb_device *udev; /* save off the usb device pointer */ + struct usb_interface *interface; /* the interface for this device */ + unsigned char minor; /* the starting minor number for this device */ + struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */ + struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */ + struct urb *int_in_urb; /* the urb for reading data */ + unsigned char *int_in_buffer; /* buffer for data to be read */ + unsigned char serial_number; /* to detect lost packages */ + unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */ + wait_queue_head_t read_wait; + wait_queue_head_t write_wait; /* wait-queue for writing to the device */ + atomic_t write_busy; /* number of write-urbs submitted */ + atomic_t read_idx; + atomic_t intr_idx; + spinlock_t intr_idx_lock; /* protects intr_idx */ + atomic_t overflow_flag; /* signals an index 'rollover' */ + int present; /* this is 1 as long as the device is connected */ + int opened; /* this is 1 if the device is currently open */ + char chip_serial[9]; /* the serial number string of the chip connected */ + int report_size; /* number of bytes in a report */ + u16 product_id; +}; + +/*--------------*/ +/* globals */ +/*--------------*/ +/* prevent races between open() and disconnect() */ +static DECLARE_MUTEX(disconnect_sem); + +/* + * USB spec identifies 5 second timeouts. + */ +#define GET_TIMEOUT 5 +#define USB_REQ_GET_REPORT 0x01 +//#if 0 +static int usb_get_report(struct usb_device *dev, + struct usb_host_interface *inter, unsigned char type, + unsigned char id, void *buf, int size) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_REPORT, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, (type << 8) + id, + inter->desc.bInterfaceNumber, buf, size, + GET_TIMEOUT); +} +//#endif + +#define USB_REQ_SET_REPORT 0x09 + +static int usb_set_report(struct usb_interface *intf, unsigned char type, + unsigned char id, void *buf, int size) +{ + return usb_control_msg(interface_to_usbdev(intf), + usb_sndctrlpipe(interface_to_usbdev(intf), 0), + USB_REQ_SET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, + intf->cur_altsetting->desc.bInterfaceNumber, buf, + size, 1); +} + +/*---------------------*/ +/* driver registration */ +/*---------------------*/ +/* table of devices that work with this driver */ +static struct usb_device_id iowarrior_ids[] = { + {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)}, + {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)}, + {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)}, + {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)}, + {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, iowarrior_ids); + +/* + * USB callback handler for reading data + */ +static void iowarrior_callback(struct urb *urb) +{ + struct iowarrior *dev = (struct iowarrior *)urb->context; + int intr_idx; + int read_idx; + int aux_idx; + int offset; + int status; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + default: + goto exit; + } + + spin_lock(&dev->intr_idx_lock); + intr_idx = atomic_read(&dev->intr_idx); + /* aux_idx become previous intr_idx */ + aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1); + read_idx = atomic_read(&dev->read_idx); + + /* queue is not empty and it's interface 0 */ + if ((intr_idx != read_idx) + && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) { + /* + 1 for serial number */ + offset = aux_idx * (dev->report_size + 1); + if (!memcmp + (dev->read_queue + offset, urb->transfer_buffer, + dev->report_size)) { + /* equal values on interface 0 will be ignored */ + spin_unlock(&dev->intr_idx_lock); + goto exit; + } + } + + /* aux_idx become next intr_idx */ + aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1); + if (read_idx == aux_idx) { + /* queue full, dropping oldest input */ + read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx; + atomic_set(&dev->read_idx, read_idx); + atomic_set(&dev->overflow_flag, 1); + } + + /* +1 for serial number */ + offset = intr_idx * (dev->report_size + 1); + memcpy(dev->read_queue + offset, urb->transfer_buffer, + dev->report_size); + *(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++; + + atomic_set(&dev->intr_idx, aux_idx); + spin_unlock(&dev->intr_idx_lock); + /* tell the blocking read about the new data */ + wake_up_interruptible(&dev->read_wait); + +exit: + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) + dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d", + __FUNCTION__, status); + +} + +/* + * USB Callback handler for write-ops + */ +static void iowarrior_write_callback(struct urb *urb) +{ + struct iowarrior *dev; + dev = (struct iowarrior *)urb->context; + /* sync/async unlink faults aren't errors */ + if (urb->status && + !(urb->status == -ENOENT || + urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) { + dbg("%s - nonzero write bulk status received: %d", + __func__, urb->status); + } + /* free up our allocated buffer */ + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + /* tell a waiting writer the interrupt-out-pipe is available again */ + atomic_dec(&dev->write_busy); + wake_up_interruptible(&dev->write_wait); +} + +/** + * iowarrior_delete + */ +static inline void iowarrior_delete(struct iowarrior *dev) +{ + dbg("%s - minor %d", __func__, dev->minor); + kfree(dev->int_in_buffer); + usb_free_urb(dev->int_in_urb); + kfree(dev->read_queue); + kfree(dev); +} + +/*---------------------*/ +/* fops implementation */ +/*---------------------*/ + +static int read_index(struct iowarrior *dev) +{ + int intr_idx, read_idx; + + read_idx = atomic_read(&dev->read_idx); + intr_idx = atomic_read(&dev->intr_idx); + + return (read_idx == intr_idx ? -1 : read_idx); +} + +/** + * iowarrior_read + */ +static ssize_t iowarrior_read(struct file *file, char __user *buffer, + size_t count, loff_t *ppos) +{ + struct iowarrior *dev; + int read_idx; + int offset; + + dev = (struct iowarrior *)file->private_data; + + /* verify that the device wasn't unplugged */ + if (dev == NULL || !dev->present) + return -ENODEV; + + dbg("%s - minor %d, count = %zd", __func__, dev->minor, count); + + /* read count must be packet size (+ time stamp) */ + if ((count != dev->report_size) + && (count != (dev->report_size + 1))) + return -EINVAL; + + /* repeat until no buffer overrun in callback handler occur */ + do { + atomic_set(&dev->overflow_flag, 0); + if ((read_idx = read_index(dev)) == -1) { + /* queue emty */ + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + else { + //next line will return when there is either new data, or the device is unplugged + int r = wait_event_interruptible(dev->read_wait, + (!dev->present + || (read_idx = + read_index + (dev)) != + -1)); + if (r) { + //we were interrupted by a signal + return -ERESTART; + } + if (!dev->present) { + //The device was unplugged + return -ENODEV; + } + if (read_idx == -1) { + // Can this happen ??? + return 0; + } + } + } + + offset = read_idx * (dev->report_size + 1); + if (copy_to_user(buffer, dev->read_queue + offset, count)) { + return -EFAULT; + } + } while (atomic_read(&dev->overflow_flag)); + + read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx; + atomic_set(&dev->read_idx, read_idx); + return count; +} + +/* + * iowarrior_write + */ +static ssize_t iowarrior_write(struct file *file, + const char __user *user_buffer, + size_t count, loff_t *ppos) +{ + struct iowarrior *dev; + int retval = 0; + char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */ + struct urb *int_out_urb = NULL; + + dev = (struct iowarrior *)file->private_data; + + mutex_lock(&dev->mutex); + /* verify that the device wasn't unplugged */ + if (dev == NULL || !dev->present) { + retval = -ENODEV; + goto exit; + } + dbg("%s - minor %d, count = %zd", __func__, dev->minor, count); + /* if count is 0 we're already done */ + if (count == 0) { + retval = 0; + goto exit; + } + /* We only accept full reports */ + if (count != dev->report_size) { + retval = -EINVAL; + goto exit; + } + switch (dev->product_id) { + case USB_DEVICE_ID_CODEMERCS_IOW24: + case USB_DEVICE_ID_CODEMERCS_IOWPV1: + case USB_DEVICE_ID_CODEMERCS_IOWPV2: + case USB_DEVICE_ID_CODEMERCS_IOW40: + /* IOW24 and IOW40 use a synchronous call */ + buf = kmalloc(8, GFP_KERNEL); /* 8 bytes are enough for both products */ + if (!buf) { + retval = -ENOMEM; + goto exit; + } + if (copy_from_user(buf, user_buffer, count)) { + retval = -EFAULT; + kfree(buf); + goto exit; + } + retval = usb_set_report(dev->interface, 2, 0, buf, count); + kfree(buf); + goto exit; + break; + case USB_DEVICE_ID_CODEMERCS_IOW56: + /* The IOW56 uses asynchronous IO and more urbs */ + if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) { + /* Wait until we are below the limit for submitted urbs */ + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto exit; + } else { + retval = wait_event_interruptible(dev->write_wait, + (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT))); + if (retval) { + /* we were interrupted by a signal */ + retval = -ERESTART; + goto exit; + } + if (!dev->present) { + /* The device was unplugged */ + retval = -ENODEV; + goto exit; + } + if (!dev->opened) { + /* We were closed while waiting for an URB */ + retval = -ENODEV; + goto exit; + } + } + } + atomic_inc(&dev->write_busy); + int_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!int_out_urb) { + retval = -ENOMEM; + dbg("%s Unable to allocate urb ", __func__); + goto error; + } + buf = usb_buffer_alloc(dev->udev, dev->report_size, + GFP_KERNEL, &int_out_urb->transfer_dma); + if (!buf) { + retval = -ENOMEM; + dbg("%s Unable to allocate buffer ", __func__); + goto error; + } + usb_fill_int_urb(int_out_urb, dev->udev, + usb_sndintpipe(dev->udev, + dev->int_out_endpoint->bEndpointAddress), + buf, dev->report_size, + iowarrior_write_callback, dev, + dev->int_out_endpoint->bInterval); + int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (copy_from_user(buf, user_buffer, count)) { + retval = -EFAULT; + goto error; + } + retval = usb_submit_urb(int_out_urb, GFP_KERNEL); + if (retval) { + dbg("%s submit error %d for urb nr.%d", __func__, + retval, atomic_read(&dev->write_busy)); + goto error; + } + /* submit was ok */ + retval = count; + usb_free_urb(int_out_urb); + goto exit; + break; + default: + /* what do we have here ? An unsupported Product-ID ? */ + dev_err(&dev->interface->dev, "%s - not supported for product=0x%x", + __FUNCTION__, dev->product_id); + retval = -EFAULT; + goto exit; + break; + } +error: + usb_buffer_free(dev->udev, dev->report_size, buf, + int_out_urb->transfer_dma); + usb_free_urb(int_out_urb); + atomic_dec(&dev->write_busy); + wake_up_interruptible(&dev->write_wait); +exit: + mutex_unlock(&dev->mutex); + return retval; +} + +/** + * iowarrior_ioctl + */ +static int iowarrior_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct iowarrior *dev = NULL; + __u8 *buffer; + __u8 __user *user_buffer; + int retval; + int io_res; /* checks for bytes read/written and copy_to/from_user results */ + + dev = (struct iowarrior *)file->private_data; + if (dev == NULL) { + return -ENODEV; + } + + buffer = kzalloc(dev->report_size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + /* lock this object */ + mutex_lock(&dev->mutex); + + /* verify that the device wasn't unplugged */ + if (!dev->present) { + mutex_unlock(&dev->mutex); + return -ENODEV; + } + + dbg("%s - minor %d, cmd 0x%.4x, arg %ld", __func__, dev->minor, cmd, + arg); + + retval = 0; + io_res = 0; + switch (cmd) { + case IOW_WRITE: + if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 || + dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 || + dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 || + dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) { + user_buffer = (__u8 __user *)arg; + io_res = copy_from_user(buffer, user_buffer, + dev->report_size); + if (io_res) { + retval = -EFAULT; + } else { + io_res = usb_set_report(dev->interface, 2, 0, + buffer, + dev->report_size); + if (io_res < 0) + retval = io_res; + } + } else { + retval = -EINVAL; + dev_err(&dev->interface->dev, + "ioctl 'IOW_WRITE' is not supported for product=0x%x.", + dev->product_id); + } + break; + case IOW_READ: + user_buffer = (__u8 __user *)arg; + io_res = usb_get_report(dev->udev, + dev->interface->cur_altsetting, 1, 0, + buffer, dev->report_size); + if (io_res < 0) + retval = io_res; + else { + io_res = copy_to_user(user_buffer, buffer, dev->report_size); + if (io_res < 0) + retval = -EFAULT; + } + break; + case IOW_GETINFO: + { + /* Report available information for the device */ + struct iowarrior_info info; + /* needed for power consumption */ + struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc; + + /* directly from the descriptor */ + info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); + info.product = dev->product_id; + info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice); + + /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */ + info.speed = le16_to_cpu(dev->udev->speed); + info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber; + info.report_size = dev->report_size; + + /* serial number string has been read earlier 8 chars or empty string */ + memcpy(info.serial, dev->chip_serial, + sizeof(dev->chip_serial)); + if (cfg_descriptor == NULL) { + info.power = -1; /* no information available */ + } else { + /* the MaxPower is stored in units of 2mA to make it fit into a byte-value */ + info.power = cfg_descriptor->bMaxPower * 2; + } + io_res = copy_to_user((struct iowarrior_info __user *)arg, &info, + sizeof(struct iowarrior_info)); + if (io_res < 0) + retval = -EFAULT; + break; + } + default: + /* return that we did not understand this ioctl call */ + retval = -ENOTTY; + break; + } + + /* unlock the device */ + mutex_unlock(&dev->mutex); + return retval; +} + +/** + * iowarrior_open + */ +static int iowarrior_open(struct inode *inode, struct file *file) +{ + struct iowarrior *dev = NULL; + struct usb_interface *interface; + int subminor; + int retval = 0; + + dbg("%s", __func__); + + subminor = iminor(inode); + + /* prevent disconnects */ + down(&disconnect_sem); + + interface = usb_find_interface(&iowarrior_driver, subminor); + if (!interface) { + err("%s - error, can't find device for minor %d", __FUNCTION__, + subminor); + retval = -ENODEV; + goto out; + } + + dev = usb_get_intfdata(interface); + if (!dev) { + retval = -ENODEV; + goto out; + } + + /* Only one process can open each device, no sharing. */ + if (dev->opened) { + retval = -EBUSY; + goto out; + } + + /* setup interrupt handler for receiving values */ + if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) { + dev_err(&interface->dev, "Error %d while submitting URB\n", retval); + retval = -EFAULT; + goto out; + } + /* increment our usage count for the driver */ + ++dev->opened; + /* save our object in the file's private structure */ + file->private_data = dev; + retval = 0; + +out: + up(&disconnect_sem); + return retval; +} + +/** + * iowarrior_release + */ +static int iowarrior_release(struct inode *inode, struct file *file) +{ + struct iowarrior *dev; + int retval = 0; + + dev = (struct iowarrior *)file->private_data; + if (dev == NULL) { + return -ENODEV; + } + + dbg("%s - minor %d", __func__, dev->minor); + + /* lock our device */ + mutex_lock(&dev->mutex); + + if (dev->opened <= 0) { + retval = -ENODEV; /* close called more than once */ + mutex_unlock(&dev->mutex); + } else { + dev->opened = 0; /* we're closeing now */ + retval = 0; + if (dev->present) { + /* + The device is still connected so we only shutdown + pending read-/write-ops. + */ + usb_kill_urb(dev->int_in_urb); + wake_up_interruptible(&dev->read_wait); + wake_up_interruptible(&dev->write_wait); + mutex_unlock(&dev->mutex); + } else { + /* The device was unplugged, cleanup resources */ + mutex_unlock(&dev->mutex); + iowarrior_delete(dev); + } + } + return retval; +} + +static unsigned iowarrior_poll(struct file *file, poll_table * wait) +{ + struct iowarrior *dev = file->private_data; + unsigned int mask = 0; + + if (!dev->present) + return POLLERR | POLLHUP; + + poll_wait(file, &dev->read_wait, wait); + poll_wait(file, &dev->write_wait, wait); + + if (!dev->present) + return POLLERR | POLLHUP; + + if (read_index(dev) != -1) + mask |= POLLIN | POLLRDNORM; + + if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT) + mask |= POLLOUT | POLLWRNORM; + return mask; +} + +/* + * File operations needed when we register this driver. + * This assumes that this driver NEEDS file operations, + * of course, which means that the driver is expected + * to have a node in the /dev directory. If the USB + * device were for a network interface then the driver + * would use "struct net_driver" instead, and a serial + * device would use "struct tty_driver". + */ +static struct file_operations iowarrior_fops = { + .owner = THIS_MODULE, + .write = iowarrior_write, + .read = iowarrior_read, + .ioctl = iowarrior_ioctl, + .open = iowarrior_open, + .release = iowarrior_release, + .poll = iowarrior_poll, +}; + +/* + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with devfs and the driver core + */ +static struct usb_class_driver iowarrior_class = { + .name = "iowarrior%d", + .fops = &iowarrior_fops, + .minor_base = IOWARRIOR_MINOR_BASE, +}; + +/*---------------------------------*/ +/* probe and disconnect functions */ +/*---------------------------------*/ +/** + * iowarrior_probe + * + * Called by the usb core when a new device is connected that it thinks + * this driver might be interested in. + */ +static int iowarrior_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct iowarrior *dev = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int i; + int retval = -ENOMEM; + int idele = 0; + + /* allocate memory for our device state and intialize it */ + dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "Out of memory"); + return retval; + } + + mutex_init(&dev->mutex); + + atomic_set(&dev->intr_idx, 0); + atomic_set(&dev->read_idx, 0); + spin_lock_init(&dev->intr_idx_lock); + atomic_set(&dev->overflow_flag, 0); + init_waitqueue_head(&dev->read_wait); + atomic_set(&dev->write_busy, 0); + init_waitqueue_head(&dev->write_wait); + + dev->udev = udev; + dev->interface = interface; + + iface_desc = interface->cur_altsetting; + dev->product_id = le16_to_cpu(udev->descriptor.idProduct); + + /* set up the endpoint information */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (usb_endpoint_is_int_in(endpoint)) + dev->int_in_endpoint = endpoint; + if (usb_endpoint_is_int_out(endpoint)) + /* this one will match for the IOWarrior56 only */ + dev->int_out_endpoint = endpoint; + } + /* we have to check the report_size often, so remember it in the endianess suitable for our machine */ + dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize); + if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && + (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56)) + /* IOWarrior56 has wMaxPacketSize different from report size */ + dev->report_size = 7; + + /* create the urb and buffer for reading */ + dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->int_in_urb) { + dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n"); + goto error; + } + dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL); + if (!dev->int_in_buffer) { + dev_err(&interface->dev, "Couldn't allocate int_in_buffer\n"); + goto error; + } + usb_fill_int_urb(dev->int_in_urb, dev->udev, + usb_rcvintpipe(dev->udev, + dev->int_in_endpoint->bEndpointAddress), + dev->int_in_buffer, dev->report_size, + iowarrior_callback, dev, + dev->int_in_endpoint->bInterval); + /* create an internal buffer for interrupt data from the device */ + dev->read_queue = + kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER), + GFP_KERNEL); + if (!dev->read_queue) { + dev_err(&interface->dev, "Couldn't allocate read_queue\n"); + goto error; + } + /* Get the serial-number of the chip */ + memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial)); + usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial, + sizeof(dev->chip_serial)); + if (strlen(dev->chip_serial) != 8) + memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial)); + + /* Set the idle timeout to 0, if this is interface 0 */ + if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) { + idele = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x0A, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, + 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + dbg("idele = %d", idele); + } + /* allow device read and ioctl */ + dev->present = 1; + + /* we can register the device now, as it is ready */ + usb_set_intfdata(interface, dev); + + retval = usb_register_dev(interface, &iowarrior_class); + if (retval) { + /* something prevented us from registering this driver */ + dev_err(&interface->dev, "Not able to get a minor for this device.\n"); + usb_set_intfdata(interface, NULL); + goto error; + } + + dev->minor = interface->minor; + + /* let the user know what node this device is now attached to */ + dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d " + "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial, + iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE); + return retval; + +error: + iowarrior_delete(dev); + return retval; +} + +/** + * iowarrior_disconnect + * + * Called by the usb core when the device is removed from the system. + */ +static void iowarrior_disconnect(struct usb_interface *interface) +{ + struct iowarrior *dev; + int minor; + + /* prevent races with open() */ + down(&disconnect_sem); + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + mutex_lock(&dev->mutex); + + minor = dev->minor; + + /* give back our minor */ + usb_deregister_dev(interface, &iowarrior_class); + + /* prevent device read, write and ioctl */ + dev->present = 0; + + mutex_unlock(&dev->mutex); + + if (dev->opened) { + /* There is a process that holds a filedescriptor to the device , + so we only shutdown read-/write-ops going on. + Deleting the device is postponed until close() was called. + */ + usb_kill_urb(dev->int_in_urb); + wake_up_interruptible(&dev->read_wait); + wake_up_interruptible(&dev->write_wait); + } else { + /* no process is using the device, cleanup now */ + iowarrior_delete(dev); + } + up(&disconnect_sem); + + dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n", + minor - IOWARRIOR_MINOR_BASE); +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver iowarrior_driver = { + .name = "iowarrior", + .probe = iowarrior_probe, + .disconnect = iowarrior_disconnect, + .id_table = iowarrior_ids, +}; + +static int __init iowarrior_init(void) +{ + return usb_register(&iowarrior_driver); +} + +static void __exit iowarrior_exit(void) +{ + usb_deregister(&iowarrior_driver); +} + +module_init(iowarrior_init); +module_exit(iowarrior_exit); diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index c01dfe60367..b2bedd974ac 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1165,7 +1165,7 @@ err_dev: return rc; } -void __exit mon_bin_exit(void) +void mon_bin_exit(void) { cdev_del(&mon_bin_cdev); unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR); diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index d38a1279d9d..494ee3b9a22 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -520,7 +520,7 @@ int __init mon_text_init(void) return 0; } -void __exit mon_text_exit(void) +void mon_text_exit(void) { debugfs_remove(mon_dir); } diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index 4f949ce8a7f..efdfd8993d9 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -57,9 +57,9 @@ void mon_text_del(struct mon_bus *mbus); // void mon_bin_add(struct mon_bus *); int __init mon_text_init(void); -void __exit mon_text_exit(void); +void mon_text_exit(void); int __init mon_bin_init(void); -void __exit mon_bin_exit(void); +void mon_bin_exit(void); /* * DMA interface. diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index 0f3d7dbb537..3de564b2314 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -186,6 +186,15 @@ config USB_NET_CDCETHER IEEE 802 "local assignment" bit is set in the address, a "usbX" name is used instead. +config USB_NET_DM9601 + tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + select USB_USBNET_MII + help + This option adds support for Davicom DM9601 based USB 1.1 + 10/100 Ethernet adapters. + config USB_NET_GL620A tristate "GeneSys GL620USB-A based cables" depends on USB_USBNET diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile index 7b51964de17..595a539f838 100644 --- a/drivers/usb/net/Makefile +++ b/drivers/usb/net/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o obj-$(CONFIG_USB_NET_NET1080) += net1080.o obj-$(CONFIG_USB_NET_PLUSB) += plusb.o diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 7ef2e4b5e39..5808ea08245 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -1395,9 +1395,9 @@ static const struct usb_device_id products [] = { USB_DEVICE (0x07b8, 0x420a), .driver_info = (unsigned long) &hawking_uf200_info, }, { - // Billionton Systems, USB2AR - USB_DEVICE (0x08dd, 0x90ff), - .driver_info = (unsigned long) &ax8817x_info, + // Billionton Systems, USB2AR + USB_DEVICE (0x08dd, 0x90ff), + .driver_info = (unsigned long) &ax8817x_info, }, { // ATEN UC210T USB_DEVICE (0x0557, 0x2009), @@ -1423,9 +1423,13 @@ static const struct usb_device_id products [] = { USB_DEVICE (0x1631, 0x6200), .driver_info = (unsigned long) &ax8817x_info, }, { + // JVC MP-PRX1 Port Replicator + USB_DEVICE (0x04f1, 0x3008), + .driver_info = (unsigned long) &ax8817x_info, +}, { // ASIX AX88772 10/100 - USB_DEVICE (0x0b95, 0x7720), - .driver_info = (unsigned long) &ax88772_info, + USB_DEVICE (0x0b95, 0x7720), + .driver_info = (unsigned long) &ax88772_info, }, { // ASIX AX88178 10/100/1000 USB_DEVICE (0x0b95, 0x1780), diff --git a/drivers/usb/net/dm9601.c b/drivers/usb/net/dm9601.c new file mode 100644 index 00000000000..4a932e1cd93 --- /dev/null +++ b/drivers/usb/net/dm9601.c @@ -0,0 +1,606 @@ +/* + * Davicom DM9601 USB 1.1 10/100Mbps ethernet devices + * + * Peter Korsgaard <jacmet@sunsite.dk> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +//#define DEBUG + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> + +#include "usbnet.h" + +/* datasheet: + http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf +*/ + +/* control requests */ +#define DM_READ_REGS 0x00 +#define DM_WRITE_REGS 0x01 +#define DM_READ_MEMS 0x02 +#define DM_WRITE_REG 0x03 +#define DM_WRITE_MEMS 0x05 +#define DM_WRITE_MEM 0x07 + +/* registers */ +#define DM_NET_CTRL 0x00 +#define DM_RX_CTRL 0x05 +#define DM_SHARED_CTRL 0x0b +#define DM_SHARED_ADDR 0x0c +#define DM_SHARED_DATA 0x0d /* low + high */ +#define DM_PHY_ADDR 0x10 /* 6 bytes */ +#define DM_MCAST_ADDR 0x16 /* 8 bytes */ +#define DM_GPR_CTRL 0x1e +#define DM_GPR_DATA 0x1f + +#define DM_MAX_MCAST 64 +#define DM_MCAST_SIZE 8 +#define DM_EEPROM_LEN 256 +#define DM_TX_OVERHEAD 2 /* 2 byte header */ +#define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */ +#define DM_TIMEOUT 1000 + + +static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) +{ + devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length); + return usb_control_msg(dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + DM_READ_REGS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, reg, data, length, USB_CTRL_SET_TIMEOUT); +} + +static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) +{ + return dm_read(dev, reg, 1, value); +} + +static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) +{ + devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length); + return usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + DM_WRITE_REGS, + USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, + 0, reg, data, length, USB_CTRL_SET_TIMEOUT); +} + +static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) +{ + devdbg(dev, "dm_write_reg() reg=0x%02x, value=0x%02x", reg, value); + return usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + DM_WRITE_REG, + USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, + value, reg, 0, 0, USB_CTRL_SET_TIMEOUT); +} + +static void dm_write_async_callback(struct urb *urb) +{ + struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; + + if (urb->status < 0) + printk(KERN_DEBUG "dm_write_async_callback() failed with %d", + urb->status); + + kfree(req); + usb_free_urb(urb); +} + +static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) +{ + struct usb_ctrlrequest *req; + struct urb *urb; + int status; + + devdbg(dev, "dm_write_async() reg=0x%02x length=%d", reg, length); + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + deverr(dev, "Error allocating URB in dm_write_async!"); + return; + } + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); + if (!req) { + deverr(dev, "Failed to allocate memory for control request"); + usb_free_urb(urb); + return; + } + + req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + req->bRequest = DM_WRITE_REGS; + req->wValue = 0; + req->wIndex = cpu_to_le16(reg); + req->wLength = cpu_to_le16(length); + + usb_fill_control_urb(urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), + (void *)req, data, length, + dm_write_async_callback, req); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status < 0) { + deverr(dev, "Error submitting the control message: status=%d", + status); + kfree(req); + usb_free_urb(urb); + } +} + +static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value) +{ + struct usb_ctrlrequest *req; + struct urb *urb; + int status; + + devdbg(dev, "dm_write_reg_async() reg=0x%02x value=0x%02x", + reg, value); + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + deverr(dev, "Error allocating URB in dm_write_async!"); + return; + } + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); + if (!req) { + deverr(dev, "Failed to allocate memory for control request"); + usb_free_urb(urb); + return; + } + + req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + req->bRequest = DM_WRITE_REG; + req->wValue = cpu_to_le16(value); + req->wIndex = cpu_to_le16(reg); + req->wLength = 0; + + usb_fill_control_urb(urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), + (void *)req, 0, 0, dm_write_async_callback, req); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status < 0) { + deverr(dev, "Error submitting the control message: status=%d", + status); + kfree(req); + usb_free_urb(urb); + } +} + +static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, u16 *value) +{ + int ret, i; + + mutex_lock(&dev->phy_mutex); + + dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); + dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4); + + for (i = 0; i < DM_TIMEOUT; i++) { + u8 tmp; + + udelay(1); + ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp); + if (ret < 0) + goto out; + + /* ready */ + if ((tmp & 1) == 0) + break; + } + + if (i == DM_TIMEOUT) { + deverr(dev, "%s read timed out!", phy ? "phy" : "eeprom"); + ret = -EIO; + goto out; + } + + dm_write_reg(dev, DM_SHARED_CTRL, 0x0); + ret = dm_read(dev, DM_SHARED_DATA, 2, value); + + devdbg(dev, "read shared %d 0x%02x returned 0x%04x, %d", + phy, reg, *value, ret); + + out: + mutex_unlock(&dev->phy_mutex); + return ret; +} + +static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, u16 value) +{ + int ret, i; + + mutex_lock(&dev->phy_mutex); + + ret = dm_write(dev, DM_SHARED_DATA, 2, &value); + if (ret < 0) + goto out; + + dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); + dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14); + + for (i = 0; i < DM_TIMEOUT; i++) { + u8 tmp; + + udelay(1); + ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp); + if (ret < 0) + goto out; + + /* ready */ + if ((tmp & 1) == 0) + break; + } + + if (i == DM_TIMEOUT) { + deverr(dev, "%s write timed out!", phy ? "phy" : "eeprom"); + ret = -EIO; + goto out; + } + + dm_write_reg(dev, DM_SHARED_CTRL, 0x0); + +out: + mutex_unlock(&dev->phy_mutex); + return ret; +} + +static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) +{ + return dm_read_shared_word(dev, 0, offset, value); +} + + + +static int dm9601_get_eeprom_len(struct net_device *dev) +{ + return DM_EEPROM_LEN; +} + +static int dm9601_get_eeprom(struct net_device *net, + struct ethtool_eeprom *eeprom, u8 * data) +{ + struct usbnet *dev = netdev_priv(net); + u16 *ebuf = (u16 *) data; + int i; + + /* access is 16bit */ + if ((eeprom->offset % 2) || (eeprom->len % 2)) + return -EINVAL; + + for (i = 0; i < eeprom->len / 2; i++) { + if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i, + &ebuf[i]) < 0) + return -EINVAL; + } + return 0; +} + +static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(netdev); + + u16 res; + + if (phy_id) { + devdbg(dev, "Only internal phy supported"); + return 0; + } + + dm_read_shared_word(dev, 1, loc, &res); + + devdbg(dev, + "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc, + int val) +{ + struct usbnet *dev = netdev_priv(netdev); + u16 res = cpu_to_le16(val); + + if (phy_id) { + devdbg(dev, "Only internal phy supported"); + return; + } + + devdbg(dev,"dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", + phy_id, loc, val); + + dm_write_shared_word(dev, 1, loc, res); +} + +static void dm9601_get_drvinfo(struct net_device *net, + struct ethtool_drvinfo *info) +{ + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + info->eedump_len = DM_EEPROM_LEN; +} + +static u32 dm9601_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_link_ok(&dev->mii); +} + +static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static struct ethtool_ops dm9601_ethtool_ops = { + .get_drvinfo = dm9601_get_drvinfo, + .get_link = dm9601_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_eeprom_len = dm9601_get_eeprom_len, + .get_eeprom = dm9601_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static void dm9601_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + /* We use the 20 byte dev->data for our 8 byte filter buffer + * to avoid allocating memory that is tricky to free later */ + u8 *hashes = (u8 *) & dev->data; + u8 rx_ctl = 0x01; + + memset(hashes, 0x00, DM_MCAST_SIZE); + hashes[DM_MCAST_SIZE - 1] |= 0x80; /* broadcast address */ + + if (net->flags & IFF_PROMISC) { + rx_ctl |= 0x02; + } else if (net->flags & IFF_ALLMULTI || net->mc_count > DM_MAX_MCAST) { + rx_ctl |= 0x04; + } else if (net->mc_count) { + struct dev_mc_list *mc_list = net->mc_list; + int i; + + for (i = 0; i < net->mc_count; i++) { + u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26; + hashes[crc >> 3] |= 1 << (crc & 0x7); + } + } + + dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes); + dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl); +} + +static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + + ret = usbnet_get_endpoints(dev, intf); + if (ret) + goto out; + + dev->net->do_ioctl = dm9601_ioctl; + dev->net->set_multicast_list = dm9601_set_multicast; + dev->net->ethtool_ops = &dm9601_ethtool_ops; + dev->net->hard_header_len += DM_TX_OVERHEAD; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; + dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD; + + dev->mii.dev = dev->net; + dev->mii.mdio_read = dm9601_mdio_read; + dev->mii.mdio_write = dm9601_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + + /* reset */ + ret = dm_write_reg(dev, DM_NET_CTRL, 1); + udelay(20); + + /* read MAC */ + ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr); + if (ret < 0) { + printk(KERN_ERR "Error reading MAC address\n"); + ret = -ENODEV; + goto out; + } + + + /* power up phy */ + dm_write_reg(dev, DM_GPR_CTRL, 1); + dm_write_reg(dev, DM_GPR_DATA, 0); + + /* receive broadcast packets */ + dm9601_set_multicast(dev->net); + + dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); + mii_nway_restart(&dev->mii); + +out: + return ret; +} + +static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + u8 status; + int len; + + /* format: + b0: rx status + b1: packet length (incl crc) low + b2: packet length (incl crc) high + b3..n-4: packet data + bn-3..bn: ethernet crc + */ + + if (unlikely(skb->len < DM_RX_OVERHEAD)) { + dev_err(&dev->udev->dev, "unexpected tiny rx frame\n"); + return 0; + } + + status = skb->data[0]; + len = (skb->data[1] | (skb->data[2] << 8)) - 4; + + if (unlikely(status & 0xbf)) { + if (status & 0x01) dev->stats.rx_fifo_errors++; + if (status & 0x02) dev->stats.rx_crc_errors++; + if (status & 0x04) dev->stats.rx_frame_errors++; + if (status & 0x20) dev->stats.rx_missed_errors++; + if (status & 0x90) dev->stats.rx_length_errors++; + return 0; + } + + skb_pull(skb, 3); + skb_trim(skb, len); + + return 1; +} + +static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int len; + + /* format: + b0: packet length low + b1: packet length high + b3..n: packet data + */ + + if (skb_headroom(skb) < DM_TX_OVERHEAD) { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + __skb_push(skb, DM_TX_OVERHEAD); + + len = skb->len; + /* usbnet adds padding if length is a multiple of packet size + if so, adjust length value in header */ + if ((len % dev->maxpacket) == 0) + len++; + + skb->data[0] = len; + skb->data[1] = len >> 8; + + return skb; +} + +static void dm9601_status(struct usbnet *dev, struct urb *urb) +{ + int link; + u8 *buf; + + /* format: + b0: net status + b1: tx status 1 + b2: tx status 2 + b3: rx status + b4: rx overflow + b5: rx count + b6: tx count + b7: gpr + */ + + if (urb->actual_length < 8) + return; + + buf = urb->transfer_buffer; + + link = !!(buf[0] & 0x40); + if (netif_carrier_ok(dev->net) != link) { + if (link) { + netif_carrier_on(dev->net); + usbnet_defer_kevent (dev, EVENT_LINK_RESET); + } + else + netif_carrier_off(dev->net); + devdbg(dev, "Link Status is: %d", link); + } +} + +static int dm9601_link_reset(struct usbnet *dev) +{ + struct ethtool_cmd ecmd; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + + devdbg(dev, "link_reset() speed: %d duplex: %d", + ecmd.speed, ecmd.duplex); + + return 0; +} + +static const struct driver_info dm9601_info = { + .description = "Davicom DM9601 USB Ethernet", + .flags = FLAG_ETHER, + .bind = dm9601_bind, + .rx_fixup = dm9601_rx_fixup, + .tx_fixup = dm9601_tx_fixup, + .status = dm9601_status, + .link_reset = dm9601_link_reset, + .reset = dm9601_link_reset, +}; + +static const struct usb_device_id products[] = { + { + USB_DEVICE(0x0a46, 0x9601), /* Davicom USB-100 */ + .driver_info = (unsigned long)&dm9601_info, + }, + {}, // END +}; + +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver dm9601_driver = { + .name = "dm9601", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + +static int __init dm9601_init(void) +{ + return usb_register(&dm9601_driver); +} + +static void __exit dm9601_exit(void) +{ + usb_deregister(&dm9601_driver); +} + +module_init(dm9601_init); +module_exit(dm9601_exit); + +MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>"); +MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4695952b647..c525b42dadd 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -513,6 +513,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, + { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 7eff1c03ba8..1bdda935f7d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -491,6 +491,12 @@ #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9963a8b7584..db92a7fb1f7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -67,50 +67,95 @@ static int option_tiocmset(struct usb_serial_port *port, struct file *file, static int option_send_setup(struct usb_serial_port *port); /* Vendor and product IDs */ -#define OPTION_VENDOR_ID 0x0AF0 -#define HUAWEI_VENDOR_ID 0x12D1 -#define NOVATELWIRELESS_VENDOR_ID 0x1410 -#define ANYDATA_VENDOR_ID 0x16d5 - -#define OPTION_PRODUCT_OLD 0x5000 -#define OPTION_PRODUCT_FUSION 0x6000 -#define OPTION_PRODUCT_FUSION2 0x6300 -#define OPTION_PRODUCT_COBRA 0x6500 -#define OPTION_PRODUCT_COBRA2 0x6600 -#define OPTION_PRODUCT_GTMAX36 0x6701 -#define HUAWEI_PRODUCT_E600 0x1001 -#define HUAWEI_PRODUCT_E220 0x1003 -#define NOVATELWIRELESS_PRODUCT_U740 0x1400 -#define ANYDATA_PRODUCT_ID 0x6501 +#define OPTION_VENDOR_ID 0x0AF0 +#define OPTION_PRODUCT_COLT 0x5000 +#define OPTION_PRODUCT_RICOLA 0x6000 +#define OPTION_PRODUCT_RICOLA_LIGHT 0x6100 +#define OPTION_PRODUCT_RICOLA_QUAD 0x6200 +#define OPTION_PRODUCT_RICOLA_QUAD_LIGHT 0x6300 +#define OPTION_PRODUCT_RICOLA_NDIS 0x6050 +#define OPTION_PRODUCT_RICOLA_NDIS_LIGHT 0x6150 +#define OPTION_PRODUCT_RICOLA_NDIS_QUAD 0x6250 +#define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT 0x6350 +#define OPTION_PRODUCT_COBRA 0x6500 +#define OPTION_PRODUCT_COBRA_BUS 0x6501 +#define OPTION_PRODUCT_VIPER 0x6600 +#define OPTION_PRODUCT_VIPER_BUS 0x6601 +#define OPTION_PRODUCT_GT_MAX_READY 0x6701 +#define OPTION_PRODUCT_GT_MAX 0x6711 +#define OPTION_PRODUCT_FUJI_MODEM_LIGHT 0x6721 +#define OPTION_PRODUCT_FUJI_MODEM_GT 0x6741 +#define OPTION_PRODUCT_FUJI_MODEM_EX 0x6761 +#define OPTION_PRODUCT_FUJI_NETWORK_LIGHT 0x6731 +#define OPTION_PRODUCT_FUJI_NETWORK_GT 0x6751 +#define OPTION_PRODUCT_FUJI_NETWORK_EX 0x6771 +#define OPTION_PRODUCT_KOI_MODEM 0x6800 +#define OPTION_PRODUCT_KOI_NETWORK 0x6811 +#define OPTION_PRODUCT_SCORPION_MODEM 0x6901 +#define OPTION_PRODUCT_SCORPION_NETWORK 0x6911 +#define OPTION_PRODUCT_ETNA_MODEM 0x7001 +#define OPTION_PRODUCT_ETNA_NETWORK 0x7011 +#define OPTION_PRODUCT_ETNA_MODEM_LITE 0x7021 +#define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041 +#define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061 +#define OPTION_PRODUCT_ETNA_NETWORK_LITE 0x7031 +#define OPTION_PRODUCT_ETNA_NETWORK_GT 0x7051 +#define OPTION_PRODUCT_ETNA_NETWORK_EX 0x7071 +#define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100 +#define OPTION_PRODUCT_ETNA_KOI_NETWORK 0x7111 + +#define HUAWEI_VENDOR_ID 0x12D1 +#define HUAWEI_PRODUCT_E600 0x1001 +#define HUAWEI_PRODUCT_E220 0x1003 + +#define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define NOVATELWIRELESS_PRODUCT_U740 0x1400 + +#define ANYDATA_VENDOR_ID 0x16d5 +#define ANYDATA_PRODUCT_ID 0x6501 static struct usb_device_id option_ids[] = { - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_GT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_EX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_NETWORK) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_NETWORK) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_LITE) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_GT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; - -static struct usb_device_id option_ids1[] = { - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, - { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, - { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, - { } /* Terminating entry */ -}; - MODULE_DEVICE_TABLE(usb, option_ids); static struct usb_driver option_driver = { @@ -132,7 +177,7 @@ static struct usb_serial_driver option_1port_device = { }, .description = "GSM modem (1-port)", .usb_driver = &option_driver, - .id_table = option_ids1, + .id_table = option_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 98b0910ad80..8d4d839a9d8 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -502,6 +502,30 @@ int sysfs_create_file(struct kobject * kobj, const struct attribute * attr) /** + * sysfs_add_file_to_group - add an attribute file to a pre-existing group. + * @kobj: object we're acting for. + * @attr: attribute descriptor. + * @group: group name. + */ +int sysfs_add_file_to_group(struct kobject *kobj, + const struct attribute *attr, const char *group) +{ + struct dentry *dir; + int error; + + dir = lookup_one_len(group, kobj->dentry, strlen(group)); + if (IS_ERR(dir)) + error = PTR_ERR(dir); + else { + error = sysfs_add_file(dir, attr, SYSFS_KOBJ_ATTR); + dput(dir); + } + return error; +} +EXPORT_SYMBOL_GPL(sysfs_add_file_to_group); + + +/** * sysfs_update_file - update the modified timestamp on an object attribute. * @kobj: object we're acting for. * @attr: attribute descriptor. @@ -586,6 +610,26 @@ void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr) } +/** + * sysfs_remove_file_from_group - remove an attribute file from a group. + * @kobj: object we're acting for. + * @attr: attribute descriptor. + * @group: group name. + */ +void sysfs_remove_file_from_group(struct kobject *kobj, + const struct attribute *attr, const char *group) +{ + struct dentry *dir; + + dir = lookup_one_len(group, kobj->dentry, strlen(group)); + if (!IS_ERR(dir)) { + sysfs_hash_and_remove(dir, attr->name); + dput(dir); + } +} +EXPORT_SYMBOL_GPL(sysfs_remove_file_from_group); + + EXPORT_SYMBOL_GPL(sysfs_create_file); EXPORT_SYMBOL_GPL(sysfs_remove_file); EXPORT_SYMBOL_GPL(sysfs_update_file); diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 192de3afa96..f45450b295c 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -126,6 +126,11 @@ void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr); int __must_check sysfs_create_group(struct kobject *, const struct attribute_group *); void sysfs_remove_group(struct kobject *, const struct attribute_group *); +int sysfs_add_file_to_group(struct kobject *kobj, + const struct attribute *attr, const char *group); +void sysfs_remove_file_from_group(struct kobject *kobj, + const struct attribute *attr, const char *group); + void sysfs_notify(struct kobject * k, char *dir, char *attr); @@ -210,6 +215,18 @@ static inline void sysfs_remove_group(struct kobject * k, const struct attribute ; } +static inline int sysfs_add_file_to_group(struct kobject *kobj, + const struct attribute *attr, const char *group) +{ + return 0; +} + +static inline void sysfs_remove_file_from_group(struct kobject *kobj, + const struct attribute *attr, const char *group); +{ + ; +} + static inline void sysfs_notify(struct kobject * k, char *dir, char *attr) { } diff --git a/include/linux/usb.h b/include/linux/usb.h index a8e8d1ecebb..87dc75a6cee 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -388,10 +388,14 @@ struct usb_device { struct usb_device *children[USB_MAXCHILDREN]; int pm_usage_cnt; /* usage counter for autosuspend */ + u32 quirks; /* quirks of the whole device */ + #ifdef CONFIG_PM struct delayed_work autosuspend; /* for delayed autosuspends */ struct mutex pm_mutex; /* protects PM operations */ + unsigned autosuspend_delay; /* in jiffies */ + unsigned auto_pm:1; /* autosuspend/resume in progress */ unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */ #endif diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 245c7253122..1122a6c2c1a 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -1,8 +1,9 @@ /* - * This file holds USB constants and structures that are needed for USB - * device APIs. These are used by the USB device model, which is defined - * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C - * that need these: + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: * * - the master/host side Linux-USB kernel driver API; * - the "usbfs" user space API; and @@ -14,6 +15,19 @@ * * There's also "Wireless USB", using low power short range radios for * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. */ #ifndef __LINUX_USB_CH9_H diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h new file mode 100644 index 00000000000..cbbe020a4f5 --- /dev/null +++ b/include/linux/usb/iowarrior.h @@ -0,0 +1,33 @@ +#ifndef _IOWARRIOR_H_ +#define _IOWARRIOR_H_ + +#define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */ + +/* Define the ioctl commands for reading and writing data */ +#define IOW_WRITE _IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *) +#define IOW_READ _IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *) + +/* + A struct for available device info which is read + with the ioctl IOW_GETINFO. + To be compatible with 2.4 userspace which didn't have an easy way to get + this information. +*/ +struct iowarrior_info { + __u32 vendor; /* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */ + __u32 product; /* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_XXXXX) */ + __u8 serial[9]; /* the serial number of our chip (if a serial-number is not available this is empty string) */ + __u32 revision; /* revision number of the chip */ + __u32 speed; /* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */ + __u32 power; /* power consumption of the device in mA */ + __u32 if_num; /* the number of the endpoint */ + __u32 report_size; /* size of the data-packets on this interface */ +}; + +/* + Get some device-information (product-id , serial-number etc.) + in order to identify a chip. +*/ +#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info) + +#endif /* _IOWARRIOR_H_ */ diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h new file mode 100644 index 00000000000..6bac8faacbc --- /dev/null +++ b/include/linux/usb/quirks.h @@ -0,0 +1,11 @@ +/* + * This file holds the definitions of quirks found in USB devices. + * Only quirks that affect the whole device, not an interface, + * belong here. + */ + +/* device must not be autosuspended */ +#define USB_QUIRK_NO_AUTOSUSPEND 0x00000001 + +/* string descriptors must not be fetched using a 255-byte read */ +#define USB_QUIRK_STRING_FETCH_255 0x00000002 |