diff options
-rw-r--r-- | drivers/net/3c59x.c | 79 | ||||
-rw-r--r-- | drivers/net/dl2k.h | 12 | ||||
-rw-r--r-- | drivers/net/dm9000.c | 34 | ||||
-rw-r--r-- | drivers/net/eepro100.c | 5 | ||||
-rw-r--r-- | drivers/net/epic100.c | 20 | ||||
-rw-r--r-- | drivers/net/fealnx.c | 10 | ||||
-rw-r--r-- | drivers/net/hamradio/dmascc.c | 2 | ||||
-rw-r--r-- | drivers/net/natsemi.c | 100 | ||||
-rw-r--r-- | drivers/net/pcnet32.c | 6 | ||||
-rw-r--r-- | drivers/net/phy/lxt.c | 8 | ||||
-rw-r--r-- | drivers/net/tulip/winbond-840.c | 26 | ||||
-rw-r--r-- | drivers/net/wan/c101.c | 2 | ||||
-rw-r--r-- | drivers/net/wan/n2.c | 2 | ||||
-rw-r--r-- | drivers/net/wan/pci200syn.c | 2 | ||||
-rw-r--r-- | drivers/net/yellowfin.c | 24 |
15 files changed, 133 insertions, 199 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index e27778926eb..b467c383ae6 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -375,8 +375,7 @@ limit of 4K. of the drivers, and will likely be provided by some future kernel. */ enum pci_flags_bit { - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, + PCI_USES_MASTER=4, }; enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8, @@ -446,95 +445,95 @@ static struct vortex_chip_info { int io_size; } vortex_info_tbl[] __devinitdata = { {"3c590 Vortex 10Mbps", - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, + PCI_USES_MASTER, IS_VORTEX, 32, }, {"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, + PCI_USES_MASTER, IS_VORTEX, 32, }, {"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, + PCI_USES_MASTER, IS_VORTEX, 32, }, {"3c595 Vortex 100baseTx", - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, + PCI_USES_MASTER, IS_VORTEX, 32, }, {"3c595 Vortex 100baseT4", - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, + PCI_USES_MASTER, IS_VORTEX, 32, }, {"3c595 Vortex 100base-MII", - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, + PCI_USES_MASTER, IS_VORTEX, 32, }, {"3c900 Boomerang 10baseT", - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, + PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, {"3c900 Boomerang 10Mbps Combo", - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, + PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, {"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */ - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, {"3c900 Cyclone 10Mbps Combo", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, {"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */ - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, {"3c900B-FL Cyclone 10base-FL", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, {"3c905 Boomerang 100baseTx", - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, {"3c905 Boomerang 100baseT4", - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, {"3c905B Cyclone 100baseTx", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, {"3c905B Cyclone 10/100/BNC", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, {"3c905B-FX Cyclone 100baseFx", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, {"3c905C Tornado", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, {"3c920B-EMB-WNM (ATI Radeon 9100 IGP)", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, }, {"3c980 Cyclone", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, {"3c980C Python-T", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, {"3cSOHO100-TX Hurricane", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, {"3c555 Laptop Hurricane", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, }, {"3c556 Laptop Tornado", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR| + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR| HAS_HWCKSM, 128, }, {"3c556B Laptop Hurricane", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR| + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR| WNO_XCVR_PWR|HAS_HWCKSM, 128, }, {"3c575 [Megahertz] 10/100 LAN CardBus", - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, {"3c575 Boomerang CardBus", - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, {"3CCFE575BT Cyclone CardBus", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT| + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT| INVERT_LED_PWR|HAS_HWCKSM, 128, }, {"3CCFE575CT Tornado CardBus", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, {"3CCFE656 Cyclone CardBus", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| INVERT_LED_PWR|HAS_HWCKSM, 128, }, {"3CCFEM656B Cyclone+Winmodem CardBus", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| INVERT_LED_PWR|HAS_HWCKSM, 128, }, {"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */ - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, {"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */ - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, {"3c920 Tornado", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, {"3c982 Hydra Dual Port A", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, {"3c982 Hydra Dual Port B", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, {"3c905B-T4", - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, {"3c920B-EMB-WNM Tornado", - PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, {NULL,}, /* NULL terminated list. */ }; diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h index 6e75482d75f..53449207e53 100644 --- a/drivers/net/dl2k.h +++ b/drivers/net/dl2k.h @@ -683,11 +683,6 @@ struct netdev_private { }; /* The station address location in the EEPROM. */ -#ifdef MEM_MAPPING -#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1) -#else -#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO | PCI_ADDR0) -#endif /* The struct pci_device_id consist of: vendor, device Vendor and device ID to match (or PCI_ANY_ID) subvendor, subdevice Subsystem vendor and device ID to match (or PCI_ANY_ID) @@ -695,9 +690,10 @@ struct netdev_private { class_mask of the class are honored during the comparison. driver_data Data private to the driver. */ -static struct pci_device_id rio_pci_tbl[] = { - {0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0,} + +static const struct pci_device_id rio_pci_tbl[] = { + {0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, }, + { } }; MODULE_DEVICE_TABLE (pci, rio_pci_tbl); #define TX_TIMEOUT (4*HZ) diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 24996da4c1c..7965a9b08e7 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -410,10 +410,7 @@ dm9000_probe(struct platform_device *pdev) if (pdev->num_resources < 2) { ret = -ENODEV; goto out; - } - - switch (pdev->num_resources) { - case 2: + } else if (pdev->num_resources == 2) { base = pdev->resource[0].start; if (!request_mem_region(base, 4, ndev->name)) { @@ -423,17 +420,16 @@ dm9000_probe(struct platform_device *pdev) ndev->base_addr = base; ndev->irq = pdev->resource[1].start; - db->io_addr = (void *)base; - db->io_data = (void *)(base + 4); - - break; + db->io_addr = (void __iomem *)base; + db->io_data = (void __iomem *)(base + 4); - case 3: + } else { db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (db->addr_res == NULL || db->data_res == NULL) { + if (db->addr_res == NULL || db->data_res == NULL || + db->irq_res == NULL) { printk(KERN_ERR PFX "insufficient resources\n"); ret = -ENOENT; goto out; @@ -482,7 +478,6 @@ dm9000_probe(struct platform_device *pdev) /* ensure at least we have a default set of IO routines */ dm9000_set_io(db, iosize); - } /* check to see if anything is being over-ridden */ @@ -564,6 +559,13 @@ dm9000_probe(struct platform_device *pdev) for (i = 0; i < 6; i++) ndev->dev_addr[i] = db->srom[i]; + if (!is_valid_ether_addr(ndev->dev_addr)) { + /* try reading from mac */ + + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = ior(db, i+DM9000_PAR); + } + if (!is_valid_ether_addr(ndev->dev_addr)) printk("%s: Invalid ethernet MAC address. Please " "set using ifconfig\n", ndev->name); @@ -663,7 +665,6 @@ dm9000_init_dm9000(struct net_device *dev) db->tx_pkt_cnt = 0; db->queue_pkt_len = 0; dev->trans_start = 0; - spin_lock_init(&db->lock); } /* @@ -767,7 +768,7 @@ dm9000_stop(struct net_device *ndev) * receive the packet to upper layer, free the transmitted packet */ -void +static void dm9000_tx_done(struct net_device *dev, board_info_t * db) { int tx_status = ior(db, DM9000_NSR); /* Got TX status */ @@ -1187,13 +1188,14 @@ dm9000_drv_remove(struct platform_device *pdev) } static struct platform_driver dm9000_driver = { + .driver = { + .name = "dm9000", + .owner = THIS_MODULE, + }, .probe = dm9000_probe, .remove = dm9000_drv_remove, .suspend = dm9000_drv_suspend, .resume = dm9000_drv_resume, - .driver = { - .name = "dm9000", - }, }; static int __init diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index 467fc861360..ecf5ad85a68 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -278,11 +278,6 @@ having to sign an Intel NDA when I'm helping Intel sell their own product! static int speedo_found1(struct pci_dev *pdev, void __iomem *ioaddr, int fnd_cnt, int acpi_idle_state); -enum pci_flags_bit { - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, -}; - /* Offsets to the various registers. All accesses need not be longword aligned. */ enum speedo_offsets { diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 724d7dc35fa..ee34a16eb4e 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -191,23 +191,10 @@ IVc. Errata */ -enum pci_id_flags_bits { - /* Set PCI command register bits before calling probe1(). */ - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - /* Read and map the single following PCI BAR. */ - PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4, - PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400, -}; - enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 }; #define EPIC_TOTAL_SIZE 0x100 #define USE_IO_OPS 1 -#ifdef USE_IO_OPS -#define EPIC_IOTYPE PCI_USES_MASTER|PCI_USES_IO|PCI_ADDR0 -#else -#define EPIC_IOTYPE PCI_USES_MASTER|PCI_USES_MEM|PCI_ADDR1 -#endif typedef enum { SMSC_83C170_0, @@ -218,7 +205,6 @@ typedef enum { struct epic_chip_info { const char *name; - enum pci_id_flags_bits pci_flags; int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; @@ -227,11 +213,11 @@ struct epic_chip_info { /* indexed by chip_t */ static const struct epic_chip_info pci_id_tbl[] = { { "SMSC EPIC/100 83c170", - EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN }, + EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN }, { "SMSC EPIC/100 83c170", - EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR }, + EPIC_TOTAL_SIZE, TYPE2_INTR }, { "SMSC EPIC/C 83c175", - EPIC_IOTYPE, EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN }, + EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN }, }; diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index a8449265e5f..13eca7ede2a 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -126,16 +126,6 @@ MODULE_PARM_DESC(full_duplex, "fealnx full duplex setting(s) (1)"); #define MIN_REGION_SIZE 136 -enum pci_flags_bit { - PCI_USES_IO = 1, - PCI_USES_MEM = 2, - PCI_USES_MASTER = 4, - PCI_ADDR0 = 0x10 << 0, - PCI_ADDR1 = 0x10 << 1, - PCI_ADDR2 = 0x10 << 2, - PCI_ADDR3 = 0x10 << 3, -}; - /* A chip capabilities table, matching the entries in pci_tbl[] above. */ enum chip_capability_flags { HAS_MII_XCVR, diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c index 0d5fccc984b..c9a46b89942 100644 --- a/drivers/net/hamradio/dmascc.c +++ b/drivers/net/hamradio/dmascc.c @@ -436,7 +436,7 @@ static int __init dmascc_init(void) module_init(dmascc_init); module_exit(dmascc_exit); -static void dev_setup(struct net_device *dev) +static void __init dev_setup(struct net_device *dev) { dev->type = ARPHRD_AX25; dev->hard_header_len = AX25_MAX_HEADER_LEN; diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 2e4ecedba05..5657049c216 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -226,7 +226,6 @@ static int full_duplex[MAX_UNITS]; NATSEMI_PG1_NREGS) #define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */ #define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32)) -#define NATSEMI_DEF_EEPROM_SIZE 24 /* 12 16-bit values */ /* Buffer sizes: * The nic writes 32-bit values, even if the upper bytes of @@ -344,18 +343,6 @@ None characterised. -enum pcistuff { - PCI_USES_IO = 0x01, - PCI_USES_MEM = 0x02, - PCI_USES_MASTER = 0x04, - PCI_ADDR0 = 0x08, - PCI_ADDR1 = 0x10, -}; - -/* MMIO operations required */ -#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1) - - /* * Support for fibre connections on Am79C874: * This phy needs a special setup when connected to a fibre cable. @@ -363,22 +350,25 @@ enum pcistuff { */ #define PHYID_AM79C874 0x0022561b -#define MII_MCTRL 0x15 /* mode control register */ -#define MII_FX_SEL 0x0001 /* 100BASE-FX (fiber) */ -#define MII_EN_SCRM 0x0004 /* enable scrambler (tp) */ +enum { + MII_MCTRL = 0x15, /* mode control register */ + MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ + MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ +}; /* array of board data directly indexed by pci_tbl[x].driver_data */ static const struct { const char *name; unsigned long flags; + unsigned int eeprom_size; } natsemi_pci_info[] __devinitdata = { - { "NatSemi DP8381[56]", PCI_IOTYPE }, + { "NatSemi DP8381[56]", 0, 24 }, }; -static struct pci_device_id natsemi_pci_tbl[] = { - { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, +static const struct pci_device_id natsemi_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl); @@ -813,6 +803,42 @@ static void move_int_phy(struct net_device *dev, int addr) udelay(1); } +static void __devinit natsemi_init_media (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u32 tmp; + + netif_carrier_off(dev); + + /* get the initial settings from hardware */ + tmp = mdio_read(dev, MII_BMCR); + np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10; + np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; + np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE; + np->advertising= mdio_read(dev, MII_ADVERTISE); + + if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL + && netif_msg_probe(np)) { + printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " + "10%s %s duplex.\n", + pci_name(np->pci_dev), + (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)? + "enabled, advertise" : "disabled, force", + (np->advertising & + (ADVERTISE_100FULL|ADVERTISE_100HALF))? + "0" : "", + (np->advertising & + (ADVERTISE_100FULL|ADVERTISE_10FULL))? + "full" : "half"); + } + if (netif_msg_probe(np)) + printk(KERN_INFO + "natsemi %s: Transceiver status %#04x advertising %#04x.\n", + pci_name(np->pci_dev), mdio_read(dev, MII_BMSR), + np->advertising); + +} + static int __devinit natsemi_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -852,8 +878,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, iosize = pci_resource_len(pdev, pcibar); irq = pdev->irq; - if (natsemi_pci_info[chip_idx].flags & PCI_USES_MASTER) - pci_set_master(pdev); + pci_set_master(pdev); dev = alloc_etherdev(sizeof (struct netdev_private)); if (!dev) @@ -892,7 +917,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG; np->hands_off = 0; np->intr_status = 0; - np->eeprom_size = NATSEMI_DEF_EEPROM_SIZE; + np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; /* Initial port: * - If the nic was configured to use an external phy and if find_mii @@ -957,34 +982,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, if (mtu) dev->mtu = mtu; - netif_carrier_off(dev); - - /* get the initial settings from hardware */ - tmp = mdio_read(dev, MII_BMCR); - np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10; - np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; - np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE; - np->advertising= mdio_read(dev, MII_ADVERTISE); - - if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL - && netif_msg_probe(np)) { - printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " - "10%s %s duplex.\n", - pci_name(np->pci_dev), - (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)? - "enabled, advertise" : "disabled, force", - (np->advertising & - (ADVERTISE_100FULL|ADVERTISE_100HALF))? - "0" : "", - (np->advertising & - (ADVERTISE_100FULL|ADVERTISE_10FULL))? - "full" : "half"); - } - if (netif_msg_probe(np)) - printk(KERN_INFO - "natsemi %s: Transceiver status %#04x advertising %#04x.\n", - pci_name(np->pci_dev), mdio_read(dev, MII_BMSR), - np->advertising); + natsemi_init_media(dev); /* save the silicon revision for later querying */ np->srr = readl(ioaddr + SiliconRev); diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index fc08c4af506..0e01c75da42 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -309,12 +309,6 @@ static int pcnet32_alloc_ring(struct net_device *dev, char *name); static void pcnet32_free_ring(struct net_device *dev); static void pcnet32_check_media(struct net_device *dev, int verbose); -enum pci_flags_bit { - PCI_USES_IO = 1, PCI_USES_MEM = 2, PCI_USES_MASTER = 4, - PCI_ADDR0 = 0x10 << 0, PCI_ADDR1 = 0x10 << 1, PCI_ADDR2 = - 0x10 << 2, PCI_ADDR3 = 0x10 << 3, -}; - static u16 pcnet32_wio_read_csr(unsigned long addr, int index) { outw(index, addr + PCNET32_WIO_RAP); diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index bef79e454c3..3f702c503af 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -123,9 +123,9 @@ static int lxt971_config_intr(struct phy_device *phydev) } static struct phy_driver lxt970_driver = { - .phy_id = 0x07810000, + .phy_id = 0x78100000, .name = "LXT970", - .phy_id_mask = 0x0fffffff, + .phy_id_mask = 0xfffffff0, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = lxt970_config_init, @@ -137,9 +137,9 @@ static struct phy_driver lxt970_driver = { }; static struct phy_driver lxt971_driver = { - .phy_id = 0x0001378e, + .phy_id = 0x001378e0, .name = "LXT971", - .phy_id_mask = 0x0fffffff, + .phy_id_mask = 0xfffffff0, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = genphy_config_aneg, diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 8fea2aa455d..602a6e5002a 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -212,26 +212,15 @@ Test with 'ping -s 10000' on a fast computer. /* PCI probe table. */ -enum pci_id_flags_bits { - /* Set PCI command register bits before calling probe1(). */ - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - /* Read and map the single following PCI BAR. */ - PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4, - PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400, -}; enum chip_capability_flags { - CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,}; -#ifdef USE_IO_OPS -#define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER) -#else -#define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER) -#endif + CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8, +}; -static struct pci_device_id w840_pci_tbl[] = { +static const struct pci_device_id w840_pci_tbl[] = { { 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 }, { 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, { 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, - { 0, } + { } }; MODULE_DEVICE_TABLE(pci, w840_pci_tbl); @@ -241,18 +230,17 @@ struct pci_id_info { int pci, pci_mask, subsystem, subsystem_mask; int revision, revision_mask; /* Only 8 bits. */ } id; - enum pci_id_flags_bits pci_flags; int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; static struct pci_id_info pci_id_tbl[] = { {"Winbond W89c840", /* Sometime a Level-One switch card. */ { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 }, - W840_FLAGS, 128, CanHaveMII | HasBrokenTx | FDXOnNoMII}, + 128, CanHaveMII | HasBrokenTx | FDXOnNoMII}, {"Winbond W89c840", { 0x08401050, 0xffffffff, }, - W840_FLAGS, 128, CanHaveMII | HasBrokenTx}, + 128, CanHaveMII | HasBrokenTx}, {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,}, - W840_FLAGS, 128, CanHaveMII | HasBrokenTx}, + 128, CanHaveMII | HasBrokenTx}, {NULL,}, /* 0 terminated list. */ }; diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index b60ef02db7b..c92ac9fde08 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -7,7 +7,7 @@ * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. * - * For information see http://hq.pm.waw.pl/hdlc/ + * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/> * * Sources of information: * Hitachi HD64570 SCA User's Manual diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c index b7d88db89a5..e013b817cab 100644 --- a/drivers/net/wan/n2.c +++ b/drivers/net/wan/n2.c @@ -7,7 +7,7 @@ * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. * - * For information see http://hq.pm.waw.pl/hdlc/ + * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/> * * Note: integrated CSU/DSU/DDS are not supported by this driver * diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index 670e8bd2245..24c3c57c13c 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -7,7 +7,7 @@ * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. * - * For information see http://hq.pm.waw.pl/hdlc/ + * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/> * * Sources of information: * Hitachi HD64572 SCA-II User's Manual diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index ecec8e5db78..569305f5756 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -234,14 +234,6 @@ See Packet Engines confidential appendix (prototype chips only). -enum pci_id_flags_bits { - /* Set PCI command register bits before calling probe1(). */ - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - /* Read and map the single following PCI BAR. */ - PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4, - PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400, - PCI_UNUSED_IRQ=0x800, -}; enum capability_flags { HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16, HasMACAddrBug=32, /* Only on early revs. */ @@ -249,11 +241,6 @@ enum capability_flags { }; /* The PCI I/O space extent. */ #define YELLOWFIN_SIZE 0x100 -#ifdef USE_IO_OPS -#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO | PCI_ADDR0) -#else -#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1) -#endif struct pci_id_info { const char *name; @@ -261,24 +248,23 @@ struct pci_id_info { int pci, pci_mask, subsystem, subsystem_mask; int revision, revision_mask; /* Only 8 bits. */ } id; - enum pci_id_flags_bits pci_flags; int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; static const struct pci_id_info pci_id_tbl[] = { {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff}, - PCI_IOTYPE, YELLOWFIN_SIZE, + YELLOWFIN_SIZE, FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom}, {"Symbios SYM83C885", { 0x07011000, 0xffffffff}, - PCI_IOTYPE, YELLOWFIN_SIZE, HasMII | DontUseEeprom }, - {NULL,}, + YELLOWFIN_SIZE, HasMII | DontUseEeprom }, + { } }; -static struct pci_device_id yellowfin_pci_tbl[] = { +static const struct pci_device_id yellowfin_pci_tbl[] = { { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { 0, } + { } }; MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl); |