aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/i2c/chips/Kconfig12
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/otg/Kconfig31
-rw-r--r--drivers/usb/otg/Makefile8
-rw-r--r--drivers/usb/otg/isp1301_omap.c (renamed from drivers/i2c/chips/isp1301_omap.c)0
7 files changed, 42 insertions, 13 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index fceb71a741c..e121b66ef08 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_UWB) += uwb/
+obj-$(CONFIG_USB_OTG_UTILS) += usb/otg/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_USB_MUSB_HDRC) += usb/musb/
obj-$(CONFIG_PCI) += usb/
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 864ac561fdb..59c3d23f5bd 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -114,18 +114,6 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
-config ISP1301_OMAP
- tristate "Philips ISP1301 with OMAP OTG"
- depends on ARCH_OMAP_OTG
- help
- If you say yes here you get support for the Philips ISP1301
- USB-On-The-Go transceiver working with the OMAP OTG controller.
- The ISP1301 is used in products including H2 and H3 development
- boards for Texas Instruments OMAP processors.
-
- This driver can also be built as a module. If so, the module
- will be called isp1301_omap.
-
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 8b95f41a500..83accaaf816 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
-obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 289d81adfb9..83babb0a1df 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -150,4 +150,6 @@ source "drivers/usb/atm/Kconfig"
source "drivers/usb/gadget/Kconfig"
+source "drivers/usb/otg/Kconfig"
+
endif # USB_SUPPORT
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
new file mode 100644
index 00000000000..860342902bb
--- /dev/null
+++ b/drivers/usb/otg/Kconfig
@@ -0,0 +1,31 @@
+#
+# USB OTG infrastructure may be needed for peripheral-only, host-only,
+# or OTG-capable configurations when OTG transceivers or controllers
+# are used.
+#
+
+comment "OTG and related infrastructure"
+
+if USB || USB_GADGET
+
+config USB_OTG_UTILS
+ bool
+ help
+ Select this to make sure the build includes objects from
+ the OTG infrastructure directory.
+
+config ISP1301_OMAP
+ tristate "Philips ISP1301 with OMAP OTG"
+ depends on I2C && ARCH_OMAP_OTG
+ select USB_OTG_UTILS
+ help
+ If you say yes here you get support for the Philips ISP1301
+ USB-On-The-Go transceiver working with the OMAP OTG controller.
+ The ISP1301 is a full speed USB transceiver which is used in
+ products including H2, H3, and H4 development boards for Texas
+ Instruments OMAP processors.
+
+ This driver can also be built as a module. If so, the module
+ will be called isp1301_omap.
+
+endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
new file mode 100644
index 00000000000..483816685d0
--- /dev/null
+++ b/drivers/usb/otg/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+else ifeq ($(CONFIG_USB_GADGET_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index e0d56ef2bcb..e0d56ef2bcb 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c